Updates and fixes

update /macros folder Update *bltouch.cfg Fix Z and Y pins Fix Y direction Update MKSRN-Sv1.3 pins Clean obsolete comments
2025-12-22 23:53:36 +05:00 · 2021-10-13 15:07:13 +03:00
parent 5935bfa7f1
commit 31ac02031d
14 changed files with 452 additions and 79 deletions
--- a/Configs/macros/macros_marlin.cfg
+++ b/Configs/macros/macros_marlin.cfg
@@ -0,0 +1,123 @@
+################################################################################
+# Board: MKS Robin Nano v1.1 (Flying Bear Reborn 2.0) / MKS Robin Nano v1.3 / MKS Robin Nano-S v1.3
+# Printer: Flying Bear Ghost 4S / Ghost 5 / Reborn
+# G-code Macros by ODUCCEU
+################################################################################
+# WARNING! DO NOT EDIT THIS FILE!
+# To override settings from this file, you can copy and paste the relevant
+# sections into your printer.cfg and change it there.
+################################################################################
+
+# Marlin Compatibility #########################################################
+
+[gcode_macro G27]
+gcode:
+    PARK
+
+[gcode_macro M125]
+gcode:
+    PARK
+
+[gcode_macro M76]                                                               # Marlin Compatibility
+gcode:
+    PAUSE
+
+[gcode_macro M601]                                                               # Marlin Compatibility
+gcode:
+    PAUSE
+
+[gcode_macro M300]                                                              # Marlin Compatibility
+gcode:
+    BEEP
+
+[gcode_macro M600]                                                              # Marlin Compatibility
+gcode:
+    FILAMENT_CHANGE
+
+[gcode_macro M701]                                                              # Marlin Compatibility
+gcode:
+    FILAMENT_LOAD
+
+[gcode_macro M702]                                                              # Marlin Compatibility
+gcode:
+    FILAMENT_UNLOAD
+
+[gcode_macro M92]
+gcode:
+    {% set extruder_steps = params.E|default(0.0025)|float %}
+    SET_EXTRUDER_STEP_DISTANCE DISTANCE={extruder_steps}
+
+[gcode_macro M204]                                                              # Set Acceleration
+# Klipper accepts M204 S<value> OR M204 P<value> T<value> where both P and T must be specified
+# PrusaSliser sends M204 P<value> without T and Klipper shows an error
+# This macro makes M204 command more versatile
+rename_existing: M204.1
+gcode:
+    {% set factor = params.F|default(0.5)|float %}
+    {% if 'S' in params %}
+        SET_VELOCITY_LIMIT ACCEL={S} ACCEL_TO_DECEL={ S|float * factor }
+    {% else %}
+        {% if 'P' in params %}
+            {% if 'T' in params %}
+                {% if P|int < T|int %}
+                    SET_VELOCITY_LIMIT ACCEL={P} ACCEL_TO_DECEL={ P|float * factor }
+                {% else %}
+                    SET_VELOCITY_LIMIT ACCEL={T} ACCEL_TO_DECEL={ T|float * factor }
+                {% endif %}
+            {% else %}
+                SET_VELOCITY_LIMIT ACCEL={P} ACCEL_TO_DECEL={ P|float * factor }
+            {% endif %}
+        {% elif 'T' in params %}
+            SET_VELOCITY_LIMIT ACCEL={T} ACCEL_TO_DECEL={ T|float * factor }
+        {% endif %}
+    {% endif %}
+
+[gcode_macro M205]                                                              # Set Junction deviation or Jerk
+gcode:
+    {% if 'J' in params %}
+        SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={J}
+    {% elif 'X' in params %}
+        SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={X}
+    {% elif 'Y' in params %}
+        SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={Y}
+    {% endif %}
+
+[gcode_macro M207]                                                              # Set Firmware Retraction
+gcode:
+    {% set length = params.S|default(0.5)|float %}
+    {% set speed = params.F|default(25)|float %}
+    SET_RETRACTION RETRACT_LENGTH={length} RETRACT_SPEED={speed}
+
+[gcode_macro M303]                                                              # PID Autotune
+gcode:
+    {% if 'E' in params %}
+        {% set heater = params.E|default(0)|int %}
+        {% set temp = params.T|default(0)|float %}
+        {% if heater == 0 %}                                                    # extruder
+            {% if temp >= printer.configfile.settings.extruder.min_extrude_temp|float %}
+                {% if temp <= printer.configfile.settings.extruder.max_temp|float %}
+                    PID_CALIBRATE HEATER=extruder TARGET={T}
+                {% endif %}
+            {% endif %}
+        {% elif heater == -1 %}                                                 # bed
+            {% if temp <= printer.configfile.settings.heater_bed.max_temp|float %}
+                PID_CALIBRATE HEATER=heater_bed TARGET={T}
+            {% endif %}
+        {% endif %}
+    {% endif %}
+
+[gcode_macro M486]                                                              # Label Objects
+# M486 has no realization in Klipper yet
+# This empty macro stops M486-error terminal messages
+gcode:
+    # Do nothing
+
+[gcode_macro M500]                                                              # Save Settings
+gcode:
+    SAVE_CONFIG
+
+[gcode_macro M900]                                                              # Set Pressure Advance
+gcode:
+    {% if 'K' in params %}
+        SET_PRESSURE_ADVANCE ADVANCE={ params.K|float }
+    {% endif %}