mirror of
https://github.com/oducceu/klipper_configs.git
synced 2025-12-12 10:44:28 +05:00
31ac02031d
update /macros folder Update *bltouch.cfg Fix Z and Y pins Fix Y direction Update MKSRN-Sv1.3 pins Clean obsolete comments
124 lines
4.7 KiB
INI
124 lines
4.7 KiB
INI
################################################################################
|
|
# Board: MKS Robin Nano v1.1 (Flying Bear Reborn 2.0) / MKS Robin Nano v1.3 / MKS Robin Nano-S v1.3
|
|
# Printer: Flying Bear Ghost 4S / Ghost 5 / Reborn
|
|
# G-code Macros by ODUCCEU
|
|
################################################################################
|
|
# WARNING! DO NOT EDIT THIS FILE!
|
|
# To override settings from this file, you can copy and paste the relevant
|
|
# sections into your printer.cfg and change it there.
|
|
################################################################################
|
|
|
|
# Marlin Compatibility #########################################################
|
|
|
|
[gcode_macro G27]
|
|
gcode:
|
|
PARK
|
|
|
|
[gcode_macro M125]
|
|
gcode:
|
|
PARK
|
|
|
|
[gcode_macro M76] # Marlin Compatibility
|
|
gcode:
|
|
PAUSE
|
|
|
|
[gcode_macro M601] # Marlin Compatibility
|
|
gcode:
|
|
PAUSE
|
|
|
|
[gcode_macro M300] # Marlin Compatibility
|
|
gcode:
|
|
BEEP
|
|
|
|
[gcode_macro M600] # Marlin Compatibility
|
|
gcode:
|
|
FILAMENT_CHANGE
|
|
|
|
[gcode_macro M701] # Marlin Compatibility
|
|
gcode:
|
|
FILAMENT_LOAD
|
|
|
|
[gcode_macro M702] # Marlin Compatibility
|
|
gcode:
|
|
FILAMENT_UNLOAD
|
|
|
|
[gcode_macro M92]
|
|
gcode:
|
|
{% set extruder_steps = params.E|default(0.0025)|float %}
|
|
SET_EXTRUDER_STEP_DISTANCE DISTANCE={extruder_steps}
|
|
|
|
[gcode_macro M204] # Set Acceleration
|
|
# Klipper accepts M204 S<value> OR M204 P<value> T<value> where both P and T must be specified
|
|
# PrusaSliser sends M204 P<value> without T and Klipper shows an error
|
|
# This macro makes M204 command more versatile
|
|
rename_existing: M204.1
|
|
gcode:
|
|
{% set factor = params.F|default(0.5)|float %}
|
|
{% if 'S' in params %}
|
|
SET_VELOCITY_LIMIT ACCEL={S} ACCEL_TO_DECEL={ S|float * factor }
|
|
{% else %}
|
|
{% if 'P' in params %}
|
|
{% if 'T' in params %}
|
|
{% if P|int < T|int %}
|
|
SET_VELOCITY_LIMIT ACCEL={P} ACCEL_TO_DECEL={ P|float * factor }
|
|
{% else %}
|
|
SET_VELOCITY_LIMIT ACCEL={T} ACCEL_TO_DECEL={ T|float * factor }
|
|
{% endif %}
|
|
{% else %}
|
|
SET_VELOCITY_LIMIT ACCEL={P} ACCEL_TO_DECEL={ P|float * factor }
|
|
{% endif %}
|
|
{% elif 'T' in params %}
|
|
SET_VELOCITY_LIMIT ACCEL={T} ACCEL_TO_DECEL={ T|float * factor }
|
|
{% endif %}
|
|
{% endif %}
|
|
|
|
[gcode_macro M205] # Set Junction deviation or Jerk
|
|
gcode:
|
|
{% if 'J' in params %}
|
|
SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={J}
|
|
{% elif 'X' in params %}
|
|
SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={X}
|
|
{% elif 'Y' in params %}
|
|
SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={Y}
|
|
{% endif %}
|
|
|
|
[gcode_macro M207] # Set Firmware Retraction
|
|
gcode:
|
|
{% set length = params.S|default(0.5)|float %}
|
|
{% set speed = params.F|default(25)|float %}
|
|
SET_RETRACTION RETRACT_LENGTH={length} RETRACT_SPEED={speed}
|
|
|
|
[gcode_macro M303] # PID Autotune
|
|
gcode:
|
|
{% if 'E' in params %}
|
|
{% set heater = params.E|default(0)|int %}
|
|
{% set temp = params.T|default(0)|float %}
|
|
{% if heater == 0 %} # extruder
|
|
{% if temp >= printer.configfile.settings.extruder.min_extrude_temp|float %}
|
|
{% if temp <= printer.configfile.settings.extruder.max_temp|float %}
|
|
PID_CALIBRATE HEATER=extruder TARGET={T}
|
|
{% endif %}
|
|
{% endif %}
|
|
{% elif heater == -1 %} # bed
|
|
{% if temp <= printer.configfile.settings.heater_bed.max_temp|float %}
|
|
PID_CALIBRATE HEATER=heater_bed TARGET={T}
|
|
{% endif %}
|
|
{% endif %}
|
|
{% endif %}
|
|
|
|
[gcode_macro M486] # Label Objects
|
|
# M486 has no realization in Klipper yet
|
|
# This empty macro stops M486-error terminal messages
|
|
gcode:
|
|
# Do nothing
|
|
|
|
[gcode_macro M500] # Save Settings
|
|
gcode:
|
|
SAVE_CONFIG
|
|
|
|
[gcode_macro M900] # Set Pressure Advance
|
|
gcode:
|
|
{% if 'K' in params %}
|
|
SET_PRESSURE_ADVANCE ADVANCE={ params.K|float }
|
|
{% endif %}
|