Release v6.0.0-alpha.8

Merge develop into master (Release v6.0.0-alpha.8)

default.kiauh.cfg

@@ -14,5 +14,5 @@ port: 80
 unstable_releases: False
 
 [fluidd]
-port: 81
+port: 80
 unstable_releases: False

kiauh/components/klipper_firmware/firmware_utils.py

@@ -90,6 +90,21 @@ def find_usb_dfu_device() -> List[str]:
         return []
 
 
+def find_usb_rp2_boot_device() -> List[str]:
+    try:
+        output = check_output("lsusb", shell=True, text=True, stderr=DEVNULL)
+        device_list = []
+        if output:
+            devices = output.splitlines()
+            device_list = [d.split(" ")[5] for d in devices if "RP2 Boot" in d]
+        return device_list
+
+    except CalledProcessError as e:
+        Logger.print_error("Unable to find a USB RP2 Boot device!")
+        Logger.print_error(e, prefix=False)
+        return []
+
+
 def get_sd_flash_board_list() -> List[str]:
     if not KLIPPER_DIR.exists() or not SD_FLASH_SCRIPT.exists():
         return []

kiauh/components/klipper_firmware/flash_options.py

@@ -26,6 +26,7 @@ class FlashCommand(Enum):
 class ConnectionType(Enum):
     USB = "USB"
     USB_DFU = "USB (DFU)"
+    USB_RP2040 = "USB (RP2040)"
     UART = "UART"
 
 

kiauh/components/klipper_firmware/menus/klipper_flash_help_menu.py

@@ -143,6 +143,8 @@ class KlipperMcuConnectionHelpMenu(BaseMenu):
         count = 62 - len(color) - len(RESET_FORMAT)
         subheader1 = f"{COLOR_CYAN}USB:{RESET_FORMAT}"
         subheader2 = f"{COLOR_CYAN}UART:{RESET_FORMAT}"
+        subheader3 = f"{COLOR_CYAN}USB DFU:{RESET_FORMAT}"
+        subheader4 = f"{COLOR_CYAN}USB RP2040 Boot:{RESET_FORMAT}"
         menu = textwrap.dedent(
             f"""
             ╔═══════════════════════════════════════════════════════╗
@@ -164,6 +166,19 @@ class KlipperMcuConnectionHelpMenu(BaseMenu):
             ║ port your controller board is connected to when using ║
             ║ this connection method.                               ║
             ║                                                       ║
+            ║ {subheader3:<62} ║
+            ║ Selecting USB DFU as the connection method will scan  ║
+            ║ the USB ports for connected controller boards in      ║
+            ║ STM32 DFU mode, which is usually done by holding down ║
+            ║ the BOOT button or setting a special jumper on the    ║
+            ║ board before powering up.                             ║
+            ║                                                       ║
+            ║ {subheader4:<62} ║
+            ║ Selecting USB RP2 Boot as the connection method will  ║
+            ║ scan the USB ports for connected RP2040 controller    ║
+            ║ boards in Boot mode, which is usually done by holding ║
+            ║ down the BOOT button before powering up.              ║
+            ║                                                       ║
             ╟───────────────────────────────────────────────────────╢
             """
         )[1:]

kiauh/components/klipper_firmware/menus/klipper_flash_menu.py

@@ -17,6 +17,7 @@ from components.klipper_firmware.firmware_utils import (
     find_uart_device,
     find_usb_device_by_id,
     find_usb_dfu_device,
+    find_usb_rp2_boot_device,
     get_sd_flash_board_list,
     start_flash_process,
 )
@@ -177,6 +178,7 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
             "1": Option(method=self.select_usb),
             "2": Option(method=self.select_dfu),
             "3": Option(method=self.select_usb_dfu),
+            "4": Option(method=self.select_usb_rp2040),
         }
 
     def print_menu(self) -> None:
@@ -193,6 +195,7 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
             ║ 1) USB                                                ║
             ║ 2) UART                                               ║
             ║ 3) USB (DFU mode)                                     ║
+            ║ 4) USB (RP2040 mode)                                  ║
             ╟───────────────────────────┬───────────────────────────╢
             """
         )[1:]
@@ -210,6 +213,10 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
         self.flash_options.connection_type = ConnectionType.USB_DFU
         self.get_mcu_list()
 
+    def select_usb_rp2040(self, **kwargs):
+        self.flash_options.connection_type = ConnectionType.USB_RP2040
+        self.get_mcu_list()
+
     def get_mcu_list(self, **kwargs):
         conn_type = self.flash_options.connection_type
 
@@ -222,6 +229,9 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
         elif conn_type is ConnectionType.USB_DFU:
             Logger.print_status("Identifying MCU connected via USB in DFU mode ...")
             self.flash_options.mcu_list = find_usb_dfu_device()
+        elif conn_type is ConnectionType.USB_RP2040:
+            Logger.print_status("Identifying MCU connected via USB in RP2 Boot mode ...")
+            self.flash_options.mcu_list = find_usb_rp2_boot_device()
 
         if len(self.flash_options.mcu_list) < 1:
             Logger.print_warn("No MCUs found!")

kiauh/components/webui_client/client_dialogs.py

@@ -13,15 +13,15 @@ from components.webui_client.base_data import BaseWebClient
 from core.logger import DialogType, Logger
 
 
-def print_moonraker_not_found_dialog() -> None:
+def print_moonraker_not_found_dialog(name: str) -> None:
     Logger.print_dialog(
         DialogType.WARNING,
         [
             "No local Moonraker installation was found!",
             "\n\n",
-            "It is possible to install Mainsail without a local Moonraker installation. "
+            f"It is possible to install {name} without a local Moonraker installation. "
             "If you continue, you need to make sure, that Moonraker is installed on "
-            "another machine in your network. Otherwise Mainsail will NOT work "
+            f"another machine in your network. Otherwise {name} will NOT work "
             "correctly.",
         ],
     )
@@ -40,20 +40,25 @@ def print_client_already_installed_dialog(name: str) -> None:
 def print_client_port_select_dialog(
     name: str, port: int, ports_in_use: List[int]
 ) -> None:
-    Logger.print_dialog(
-        DialogType.CUSTOM,
-        [
-            f"Please select the port, {name} should be served on. If your are unsure "
-            f"what to select, hit Enter to apply the suggested value of: {port}",
-            "\n\n",
-            f"In case you need {name} to be served on a specific port, you can set it "
-            f"now. Make sure that the port is not already used by another application "
-            f"on your system!",
-            "\n\n",
-            "The following ports were found to be in use already:",
-            *[f"● {port}" for port in ports_in_use],
-        ],
-    )
+    dialog_content: List[str] = [
+        f"Please select the port, {name} should be served on. If your are unsure "
+        f"what to select, hit Enter to apply the suggested value of: {port}",
+        "\n\n",
+        f"In case you need {name} to be served on a specific port, you can set it "
+        f"now. Make sure that the port is not already used by another application "
+        f"on your system!",
+    ]
+
+    if ports_in_use:
+        dialog_content.extend(
+            [
+                "\n\n",
+                "The following ports were found to be in use already:",
+                *[f"● {port}" for port in ports_in_use],
+            ]
+        )
+
+    Logger.print_dialog(DialogType.CUSTOM, dialog_content)
 
 
 def print_install_client_config_dialog(client: BaseWebClient) -> None:

kiauh/components/webui_client/client_setup.py

@@ -23,7 +23,6 @@ from components.webui_client.client_config.client_config_setup import (
     install_client_config,
 )
 from components.webui_client.client_dialogs import (
-    print_client_port_select_dialog,
     print_install_client_config_dialog,
     print_moonraker_not_found_dialog,
 )
@@ -33,18 +32,15 @@ from components.webui_client.client_utils import (
     create_nginx_cfg,
     detect_client_cfg_conflict,
     enable_mainsail_remotemode,
-    get_next_free_port,
-    is_valid_port,
-    read_ports_from_nginx_configs,
+    get_client_port_selection,
     symlink_webui_nginx_log,
 )
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import Logger
-from core.settings.kiauh_settings import KiauhSettings
 from utils.common import check_install_dependencies
 from utils.config_utils import add_config_section
 from utils.fs_utils import unzip
-from utils.input_utils import get_confirm, get_number_input
+from utils.input_utils import get_confirm
 from utils.instance_utils import get_instances
 from utils.sys_utils import (
     cmd_sysctl_service,
@@ -67,7 +63,7 @@ def install_client(client: BaseWebClient) -> None:
 
     enable_remotemode = False
     if not mr_instances:
-        print_moonraker_not_found_dialog()
+        print_moonraker_not_found_dialog(client.display_name)
         if not get_confirm(f"Continue {client.display_name} installation?"):
             return
 
@@ -92,21 +88,7 @@ def install_client(client: BaseWebClient) -> None:
         question = f"Download the recommended {client_config.display_name}?"
         install_client_cfg = get_confirm(question, allow_go_back=False)
 
-    settings = KiauhSettings()
-    port: int = settings.get(client.name, "port")
-    ports_in_use: List[int] = read_ports_from_nginx_configs()
-
-    # check if configured port is a valid number and not in use already
-    valid_port = is_valid_port(port, ports_in_use)
-    while not valid_port:
-        next_port = get_next_free_port(ports_in_use)
-        print_client_port_select_dialog(client.display_name, next_port, ports_in_use)
-        port = get_number_input(
-            f"Configure {client.display_name} for port",
-            min_count=int(next_port),
-            default=next_port,
-        )
-        valid_port = is_valid_port(port, ports_in_use)
+    port: int = get_client_port_selection(client)
 
     check_install_dependencies({"nginx"})
 

kiauh/components/webui_client/client_utils.py

@@ -21,6 +21,7 @@ from components.webui_client.base_data import (
     BaseWebClient,
     WebClientType,
 )
+from components.webui_client.client_dialogs import print_client_port_select_dialog
 from components.webui_client.fluidd_data import FluiddData
 from components.webui_client.mainsail_data import MainsailData
 from core.backup_manager.backup_manager import BackupManager
@@ -33,7 +34,7 @@ from core.constants import (
     RESET_FORMAT,
 )
 from core.logger import Logger
-from core.settings.kiauh_settings import KiauhSettings
+from core.settings.kiauh_settings import KiauhSettings, WebUiSettings
 from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
     SimpleConfigParser,
 )
@@ -44,6 +45,7 @@ from utils.git_utils import (
     get_latest_remote_tag,
     get_latest_unstable_tag,
 )
+from utils.input_utils import get_number_input
 from utils.instance_utils import get_instances
 
 
@@ -368,8 +370,29 @@ def read_ports_from_nginx_configs() -> List[int]:
     return sorted(ports_to_ints_list, key=lambda x: int(x))
 
 
-def is_valid_port(port: int, ports_in_use: List[int]) -> bool:
-    return port not in ports_in_use
+def get_client_port_selection(client: BaseWebClient) -> int:
+    settings = KiauhSettings()
+    default_port: int = int(settings.get(client.name, "port"))
+
+    ports_in_use: List[int] = read_ports_from_nginx_configs()
+    next_free_port: int = get_next_free_port(ports_in_use)
+
+    port: int = next_free_port if default_port in ports_in_use else default_port
+
+    print_client_port_select_dialog(client.display_name, port, ports_in_use)
+
+    while True:
+        question = f"Configure {client.display_name} for port"
+        port_input = get_number_input(question, min_count=80, default=port)
+
+        if port_input not in ports_in_use:
+            client_settings: WebUiSettings = settings[client.name]
+            client_settings.port = port_input
+            settings.save()
+
+            return port_input
+
+        Logger.print_error("This port is already in use. Please select another one.")
 
 
 def get_next_free_port(ports_in_use: List[int]) -> int:

scripts/spoolman.sh

@@ -127,9 +127,9 @@ managed_services: Spoolman
   regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/moonraker\.asvc"
   moonraker_asvc=$(find "${HOME}" -maxdepth 2 -type f -regextype posix-extended -regex "${regex}" | sort)
 
-  if [[ -n ${moonraker_asvc} ]]; then
+  if ! grep -q "^Spoolman$" "${moonraker_asvc}"; then
     status_msg "Adding Spoolman service to moonraker.asvc..."
-    /bin/sh -c "echo 'Spoolman' >> ${moonraker_asvc}"
+    sed -i '$a''Spoolman' "${moonraker_asvc}"
   fi
 }
 
@@ -248,7 +248,7 @@ function get_spoolman_status() {
 
 function get_local_spoolman_version() {
   [[ ! -d "${SPOOLMAN_DIR}" ]] && return
-  
+
   local version
   version=$(grep -o '"version":\s*"[^"]*' "${SPOOLMAN_DIR}"/release_info.json | cut -d'"' -f4)
   echo "${version}"