Release v6.0.0-alpha.8

Merge develop into master (Release v6.0.0-alpha.8)

.gitignore

@@ -1,6 +1,10 @@
 .idea
 .vscode
 .pytest_cache
+.jupyter
+*.ipynb
+*.ipynb_checkpoints
+*.tmp
 __pycache__
 .kiauh-env
 *.code-workspace

default.kiauh.cfg

@@ -14,5 +14,5 @@ port: 80
 unstable_releases: False
 
 [fluidd]
-port: 81
+port: 80
 unstable_releases: False

kiauh/components/klipper_firmware/firmware_utils.py

@@ -90,6 +90,21 @@ def find_usb_dfu_device() -> List[str]:
         return []
 
 
+def find_usb_rp2_boot_device() -> List[str]:
+    try:
+        output = check_output("lsusb", shell=True, text=True, stderr=DEVNULL)
+        device_list = []
+        if output:
+            devices = output.splitlines()
+            device_list = [d.split(" ")[5] for d in devices if "RP2 Boot" in d]
+        return device_list
+
+    except CalledProcessError as e:
+        Logger.print_error("Unable to find a USB RP2 Boot device!")
+        Logger.print_error(e, prefix=False)
+        return []
+
+
 def get_sd_flash_board_list() -> List[str]:
     if not KLIPPER_DIR.exists() or not SD_FLASH_SCRIPT.exists():
         return []

kiauh/components/klipper_firmware/flash_options.py

@@ -26,6 +26,7 @@ class FlashCommand(Enum):
 class ConnectionType(Enum):
     USB = "USB"
     USB_DFU = "USB (DFU)"
+    USB_RP2040 = "USB (RP2040)"
     UART = "UART"
 
 

kiauh/components/klipper_firmware/menus/klipper_flash_help_menu.py

@@ -143,6 +143,8 @@ class KlipperMcuConnectionHelpMenu(BaseMenu):
         count = 62 - len(color) - len(RESET_FORMAT)
         subheader1 = f"{COLOR_CYAN}USB:{RESET_FORMAT}"
         subheader2 = f"{COLOR_CYAN}UART:{RESET_FORMAT}"
+        subheader3 = f"{COLOR_CYAN}USB DFU:{RESET_FORMAT}"
+        subheader4 = f"{COLOR_CYAN}USB RP2040 Boot:{RESET_FORMAT}"
         menu = textwrap.dedent(
             f"""
             ╔═══════════════════════════════════════════════════════╗
@@ -164,6 +166,19 @@ class KlipperMcuConnectionHelpMenu(BaseMenu):
             ║ port your controller board is connected to when using ║
             ║ this connection method.                               ║
             ║                                                       ║
+            ║ {subheader3:<62} ║
+            ║ Selecting USB DFU as the connection method will scan  ║
+            ║ the USB ports for connected controller boards in      ║
+            ║ STM32 DFU mode, which is usually done by holding down ║
+            ║ the BOOT button or setting a special jumper on the    ║
+            ║ board before powering up.                             ║
+            ║                                                       ║
+            ║ {subheader4:<62} ║
+            ║ Selecting USB RP2 Boot as the connection method will  ║
+            ║ scan the USB ports for connected RP2040 controller    ║
+            ║ boards in Boot mode, which is usually done by holding ║
+            ║ down the BOOT button before powering up.              ║
+            ║                                                       ║
             ╟───────────────────────────────────────────────────────╢
             """
         )[1:]

kiauh/components/klipper_firmware/menus/klipper_flash_menu.py

@@ -17,6 +17,7 @@ from components.klipper_firmware.firmware_utils import (
     find_uart_device,
     find_usb_device_by_id,
     find_usb_dfu_device,
+    find_usb_rp2_boot_device,
     get_sd_flash_board_list,
     start_flash_process,
 )
@@ -177,6 +178,7 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
             "1": Option(method=self.select_usb),
             "2": Option(method=self.select_dfu),
             "3": Option(method=self.select_usb_dfu),
+            "4": Option(method=self.select_usb_rp2040),
         }
 
     def print_menu(self) -> None:
@@ -193,6 +195,7 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
             ║ 1) USB                                                ║
             ║ 2) UART                                               ║
             ║ 3) USB (DFU mode)                                     ║
+            ║ 4) USB (RP2040 mode)                                  ║
             ╟───────────────────────────┬───────────────────────────╢
             """
         )[1:]
@@ -210,6 +213,10 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
         self.flash_options.connection_type = ConnectionType.USB_DFU
         self.get_mcu_list()
 
+    def select_usb_rp2040(self, **kwargs):
+        self.flash_options.connection_type = ConnectionType.USB_RP2040
+        self.get_mcu_list()
+
     def get_mcu_list(self, **kwargs):
         conn_type = self.flash_options.connection_type
 
@@ -222,6 +229,9 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
         elif conn_type is ConnectionType.USB_DFU:
             Logger.print_status("Identifying MCU connected via USB in DFU mode ...")
             self.flash_options.mcu_list = find_usb_dfu_device()
+        elif conn_type is ConnectionType.USB_RP2040:
+            Logger.print_status("Identifying MCU connected via USB in RP2 Boot mode ...")
+            self.flash_options.mcu_list = find_usb_rp2_boot_device()
 
         if len(self.flash_options.mcu_list) < 1:
             Logger.print_warn("No MCUs found!")

kiauh/components/webui_client/client_dialogs.py

@@ -13,15 +13,15 @@ from components.webui_client.base_data import BaseWebClient
 from core.logger import DialogType, Logger
 
 
-def print_moonraker_not_found_dialog() -> None:
+def print_moonraker_not_found_dialog(name: str) -> None:
     Logger.print_dialog(
         DialogType.WARNING,
         [
             "No local Moonraker installation was found!",
             "\n\n",
-            "It is possible to install Mainsail without a local Moonraker installation. "
+            f"It is possible to install {name} without a local Moonraker installation. "
             "If you continue, you need to make sure, that Moonraker is installed on "
-            "another machine in your network. Otherwise Mainsail will NOT work "
+            f"another machine in your network. Otherwise {name} will NOT work "
             "correctly.",
         ],
     )
@@ -40,20 +40,25 @@ def print_client_already_installed_dialog(name: str) -> None:
 def print_client_port_select_dialog(
     name: str, port: int, ports_in_use: List[int]
 ) -> None:
-    Logger.print_dialog(
-        DialogType.CUSTOM,
-        [
-            f"Please select the port, {name} should be served on. If your are unsure "
-            f"what to select, hit Enter to apply the suggested value of: {port}",
-            "\n\n",
-            f"In case you need {name} to be served on a specific port, you can set it "
-            f"now. Make sure that the port is not already used by another application "
-            f"on your system!",
-            "\n\n",
-            "The following ports were found to be in use already:",
-            *[f"● {port}" for port in ports_in_use],
-        ],
-    )
+    dialog_content: List[str] = [
+        f"Please select the port, {name} should be served on. If your are unsure "
+        f"what to select, hit Enter to apply the suggested value of: {port}",
+        "\n\n",
+        f"In case you need {name} to be served on a specific port, you can set it "
+        f"now. Make sure that the port is not already used by another application "
+        f"on your system!",
+    ]
+
+    if ports_in_use:
+        dialog_content.extend(
+            [
+                "\n\n",
+                "The following ports were found to be in use already:",
+                *[f"● {port}" for port in ports_in_use],
+            ]
+        )
+
+    Logger.print_dialog(DialogType.CUSTOM, dialog_content)
 
 
 def print_install_client_config_dialog(client: BaseWebClient) -> None:

kiauh/components/webui_client/client_setup.py

@@ -23,7 +23,6 @@ from components.webui_client.client_config.client_config_setup import (
     install_client_config,
 )
 from components.webui_client.client_dialogs import (
-    print_client_port_select_dialog,
     print_install_client_config_dialog,
     print_moonraker_not_found_dialog,
 )
@@ -33,18 +32,15 @@ from components.webui_client.client_utils import (
     create_nginx_cfg,
     detect_client_cfg_conflict,
     enable_mainsail_remotemode,
-    get_next_free_port,
-    is_valid_port,
-    read_ports_from_nginx_configs,
+    get_client_port_selection,
     symlink_webui_nginx_log,
 )
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import Logger
-from core.settings.kiauh_settings import KiauhSettings
 from utils.common import check_install_dependencies
 from utils.config_utils import add_config_section
 from utils.fs_utils import unzip
-from utils.input_utils import get_confirm, get_number_input
+from utils.input_utils import get_confirm
 from utils.instance_utils import get_instances
 from utils.sys_utils import (
     cmd_sysctl_service,
@@ -67,7 +63,7 @@ def install_client(client: BaseWebClient) -> None:
 
     enable_remotemode = False
     if not mr_instances:
-        print_moonraker_not_found_dialog()
+        print_moonraker_not_found_dialog(client.display_name)
         if not get_confirm(f"Continue {client.display_name} installation?"):
             return
 
@@ -92,21 +88,7 @@ def install_client(client: BaseWebClient) -> None:
         question = f"Download the recommended {client_config.display_name}?"
         install_client_cfg = get_confirm(question, allow_go_back=False)
 
-    settings = KiauhSettings()
-    port: int = settings.get(client.name, "port")
-    ports_in_use: List[int] = read_ports_from_nginx_configs()
-
-    # check if configured port is a valid number and not in use already
-    valid_port = is_valid_port(port, ports_in_use)
-    while not valid_port:
-        next_port = get_next_free_port(ports_in_use)
-        print_client_port_select_dialog(client.display_name, next_port, ports_in_use)
-        port = get_number_input(
-            f"Configure {client.display_name} for port",
-            min_count=int(next_port),
-            default=next_port,
-        )
-        valid_port = is_valid_port(port, ports_in_use)
+    port: int = get_client_port_selection(client)
 
     check_install_dependencies({"nginx"})
 

kiauh/components/webui_client/client_utils.py

@@ -21,6 +21,7 @@ from components.webui_client.base_data import (
     BaseWebClient,
     WebClientType,
 )
+from components.webui_client.client_dialogs import print_client_port_select_dialog
 from components.webui_client.fluidd_data import FluiddData
 from components.webui_client.mainsail_data import MainsailData
 from core.backup_manager.backup_manager import BackupManager
@@ -33,7 +34,7 @@ from core.constants import (
     RESET_FORMAT,
 )
 from core.logger import Logger
-from core.settings.kiauh_settings import KiauhSettings
+from core.settings.kiauh_settings import KiauhSettings, WebUiSettings
 from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
     SimpleConfigParser,
 )
@@ -44,6 +45,7 @@ from utils.git_utils import (
     get_latest_remote_tag,
     get_latest_unstable_tag,
 )
+from utils.input_utils import get_number_input
 from utils.instance_utils import get_instances
 
 
@@ -353,17 +355,44 @@ def read_ports_from_nginx_configs() -> List[int]:
             lines = cfg.readlines()
 
         for line in lines:
-            line = line.replace("default_server", "")
-            line = re.sub(r"[;:\[\]]", "", line.strip())
-            if line.startswith("listen") and line.split()[-1] not in port_list:
-                port_list.append(line.split()[-1])
+            line = re.sub(
+                r"default_server|http://|https://|[;\[\]]",
+                "",
+                line.strip(),
+            )
+            if line.startswith("listen"):
+                if ":" not in line:
+                    port_list.append(line.split()[-1])
+                else:
+                    port_list.append(line.split(":")[-1])
 
     ports_to_ints_list = [int(port) for port in port_list]
     return sorted(ports_to_ints_list, key=lambda x: int(x))
 
 
-def is_valid_port(port: int, ports_in_use: List[int]) -> bool:
-    return port not in ports_in_use
+def get_client_port_selection(client: BaseWebClient) -> int:
+    settings = KiauhSettings()
+    default_port: int = int(settings.get(client.name, "port"))
+
+    ports_in_use: List[int] = read_ports_from_nginx_configs()
+    next_free_port: int = get_next_free_port(ports_in_use)
+
+    port: int = next_free_port if default_port in ports_in_use else default_port
+
+    print_client_port_select_dialog(client.display_name, port, ports_in_use)
+
+    while True:
+        question = f"Configure {client.display_name} for port"
+        port_input = get_number_input(question, min_count=80, default=port)
+
+        if port_input not in ports_in_use:
+            client_settings: WebUiSettings = settings[client.name]
+            client_settings.port = port_input
+            settings.save()
+
+            return port_input
+
+        Logger.print_error("This port is already in use. Please select another one.")
 
 
 def get_next_free_port(ports_in_use: List[int]) -> int:

kiauh/core/constants.py

@@ -33,7 +33,7 @@ CURRENT_USER = pwd.getpwuid(os.getuid())[0]
 
 # dirs
 SYSTEMD = Path("/etc/systemd/system")
-PRINTER_CFG_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("printer-cfg-backups")
+PRINTER_DATA_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("printer-data-backups")
 NGINX_SITES_AVAILABLE = Path("/etc/nginx/sites-available")
 NGINX_SITES_ENABLED = Path("/etc/nginx/sites-enabled")
 NGINX_CONFD = Path("/etc/nginx/conf.d")

kiauh/extensions/extensions_menu.py

@@ -58,12 +58,16 @@ class ExtensionsMenu(BaseMenu):
                     module_path = f"kiauh.extensions.{ext.name}.{module_name}"
 
                     # get the class name of the extension
-                    ext_class: Type[BaseExtension] = inspect.getmembers(
-                        importlib.import_module(module_path),
-                        predicate=lambda o: inspect.isclass(o)
-                        and issubclass(o, BaseExtension)
-                        and o != BaseExtension,
-                    )[0][1]
+                    module = importlib.import_module(module_path)
+
+                    def predicate(o):
+                        return (
+                            inspect.isclass(o)
+                            and issubclass(o, BaseExtension)
+                            and o != BaseExtension
+                        )
+
+                    ext_class: type = inspect.getmembers(module, predicate)[0][1]
 
                     # instantiate the extension with its metadata and add to dict
                     ext_instance: BaseExtension = ext_class(metadata)
@@ -72,7 +76,7 @@ class ExtensionsMenu(BaseMenu):
             except (IOError, json.JSONDecodeError, ImportError) as e:
                 print(f"Failed loading extension {ext}: {e}")
 
-        return dict(sorted(ext_dict.items()))
+        return dict(sorted(ext_dict.items(), key=lambda x: int(x[0])))
 
     def extension_submenu(self, **kwargs):
         ExtensionSubmenu(kwargs.get("opt_data"), self.__class__).run()

kiauh/extensions/octoapp/__init__.py

@@ -14,7 +14,6 @@ OA_REPO = "https://github.com/crysxd/OctoApp-Plugin.git"
 # directories
 OA_DIR = Path.home().joinpath("octoapp")
 OA_ENV_DIR = Path.home().joinpath("octoapp-env")
-OA_STORE_DIR = OA_DIR.joinpath("octoapp-store")
 
 # files
 OA_REQ_FILE = OA_DIR.joinpath("requirements.txt")

kiauh/extensions/octoapp/octoapp_extension.py

@@ -10,6 +10,7 @@ import json
 from typing import List
 
 from components.moonraker.moonraker import Moonraker
+from components.klipper.klipper import Klipper
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
 from extensions.base_extension import BaseExtension
@@ -131,6 +132,7 @@ class OctoappExtension(BaseExtension):
 
         try:
             self._remove_OA_instances(ob_instances)
+            self._remove_OA_store_dirs()
             self._remove_OA_dir()
             self._remove_OA_env()
             remove_config_section(f"include {OA_SYS_CFG_NAME}", mr_instances)
@@ -181,6 +183,21 @@ class OctoappExtension(BaseExtension):
 
         run_remove_routines(OA_DIR)
 
+
+    def _remove_OA_store_dirs(self) -> None:
+        Logger.print_status("Removing OctoApp for Klipper store directory ...")
+
+        klipper_instances: List[Moonraker] = get_instances(Klipper)
+        
+        for instance in klipper_instances:
+            store_dir = instance.data_dir.joinpath("octoapp-store")
+            if not store_dir.exists():
+                Logger.print_info(f"'{store_dir}' does not exist. Skipped ...")
+                return
+
+            run_remove_routines(store_dir)
+
+
     def _remove_OA_env(self) -> None:
         Logger.print_status("Removing OctoApp for Klipper environment ...")
 

kiauh/extensions/simply_print/metadata.json

@@ -0,0 +1,13 @@
+{
+    "metadata": {
+        "index": 10,
+        "module": "simply_print_extension",
+        "maintained_by": "dw-0",
+        "display_name": "SimplyPrint",
+        "description": [
+            "3D Printer Cloud Management Software.",
+            "\n\n",
+            "3D printing doesn't have to be a complicated, analog, SD card-filled experience; step into the future of modern 3D printing"
+        ]
+    }
+}

kiauh/extensions/simply_print/simply_print_extension.py

@@ -0,0 +1,131 @@
+# ======================================================================= #
+#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from typing import List
+
+from components.moonraker.moonraker import Moonraker
+from core.instance_manager.instance_manager import InstanceManager
+from core.logger import DialogType, Logger
+from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
+    SimpleConfigParser,
+)
+from extensions.base_extension import BaseExtension
+from utils.common import backup_printer_config_dir, moonraker_exists
+from utils.input_utils import get_confirm
+
+
+# noinspection PyMethodMayBeStatic
+class SimplyPrintExtension(BaseExtension):
+    def install_extension(self, **kwargs) -> None:
+        Logger.print_status("Installing SimplyPrint ...")
+
+        if not (mr_instances := moonraker_exists("SimplyPrint Installer")):
+            return
+
+        Logger.print_dialog(
+            DialogType.INFO,
+            self._construct_dialog(mr_instances, True),
+        )
+
+        if not get_confirm(
+            "Continue SimplyPrint installation?",
+            default_choice=True,
+            allow_go_back=True,
+        ):
+            Logger.print_info("Exiting SimplyPrint installation ...")
+            return
+
+        try:
+            self._patch_moonraker_confs(mr_instances, True)
+
+        except Exception as e:
+            Logger.print_error(f"Error during SimplyPrint installation:\n{e}")
+
+    def remove_extension(self, **kwargs) -> None:
+        Logger.print_status("Removing SimplyPrint ...")
+
+        if not (mr_instances := moonraker_exists("SimplyPrint Uninstaller")):
+            return
+
+        Logger.print_dialog(
+            DialogType.INFO,
+            self._construct_dialog(mr_instances, False),
+        )
+
+        if not get_confirm(
+            "Do you really want to uninstall SimplyPrint?",
+            default_choice=True,
+            allow_go_back=True,
+        ):
+            Logger.print_info("Exiting SimplyPrint uninstallation ...")
+            return
+
+        try:
+            self._patch_moonraker_confs(mr_instances, False)
+
+        except Exception as e:
+            Logger.print_error(f"Error during SimplyPrint installation:\n{e}")
+
+    def _construct_dialog(
+        self, mr_instances: List[Moonraker], is_install: bool
+    ) -> List[str]:
+        mr_names = [f"● {m.service_file_path.name}" for m in mr_instances]
+        _type = "install" if is_install else "uninstall"
+
+        return [
+            "The following Moonraker instances were found:",
+            *mr_names,
+            "\n\n",
+            f"The setup will {_type} SimplyPrint for all Moonraker instances. "
+            f"After {_type}ation, all Moonraker services will be restarted!",
+        ]
+
+    def _patch_moonraker_confs(
+        self, mr_instances: List[Moonraker], is_install: bool
+    ) -> None:
+        section = "simplyprint"
+        _type, _ft = ("Adding", "to") if is_install else ("Removing", "from")
+
+        patched_files = []
+        for moonraker in mr_instances:
+            Logger.print_status(
+                f"{_type} section 'simplyprint' {_ft} {moonraker.cfg_file} ..."
+            )
+            scp = SimpleConfigParser()
+            scp.read_file(moonraker.cfg_file)
+
+            install_and_has_section = is_install and scp.has_section(section)
+            uninstall_and_has_no_section = not is_install and not scp.has_section(
+                section
+            )
+
+            if install_and_has_section or uninstall_and_has_no_section:
+                status = "already" if is_install else "does not"
+                Logger.print_info(
+                    f"Section 'simplyprint' {status} exists! Skipping ..."
+                )
+                continue
+
+            if is_install and not scp.has_section("simplyprint"):
+                backup_printer_config_dir()
+                scp.add_section(section)
+            elif not is_install and scp.has_section("simplyprint"):
+                backup_printer_config_dir()
+                scp.remove_section(section)
+            scp.write_file(moonraker.cfg_file)
+            patched_files.append(moonraker.cfg_file)
+
+        if patched_files:
+            InstanceManager.restart_all(mr_instances)
+
+        install_state = "successfully" if patched_files else "was already"
+        Logger.print_dialog(
+            DialogType.SUCCESS,
+            [f"SimplyPrint {install_state} {'' if is_install else 'un'}installed!"],
+            center_content=True,
+        )

kiauh/utils/common.py

@@ -14,10 +14,11 @@ from pathlib import Path
 from typing import Dict, List, Literal, Optional, Set
 
 from components.klipper.klipper import Klipper
+from components.moonraker.moonraker import Moonraker
 from core.constants import (
     COLOR_CYAN,
     GLOBAL_DEPS,
-    PRINTER_CFG_BACKUP_DIR,
+    PRINTER_DATA_BACKUP_DIR,
     RESET_FORMAT,
 )
 from core.logger import DialogType, Logger
@@ -142,23 +143,25 @@ def backup_printer_config_dir() -> None:
     instances: List[Klipper] = get_instances(Klipper)
     bm = BackupManager()
 
+    if not instances:
+        Logger.print_info("Unable to find directory to backup!")
+        Logger.print_info("Are there no Klipper instances installed?")
+        return
+
     for instance in instances:
-        name = f"config-{instance.data_dir.name}"
         bm.backup_directory(
-            name,
+            instance.data_dir.name,
             source=instance.base.cfg_dir,
-            target=PRINTER_CFG_BACKUP_DIR,
+            target=PRINTER_DATA_BACKUP_DIR,
         )
 
 
-def moonraker_exists(name: str = "") -> bool:
+def moonraker_exists(name: str = "") -> List[Moonraker]:
     """
     Helper method to check if a Moonraker instance exists
     :param name: Optional name of an installer where the check is performed
     :return: True if at least one Moonraker instance exists, False otherwise
     """
-    from components.moonraker.moonraker import Moonraker
-
     mr_instances: List[Moonraker] = get_instances(Moonraker)
 
     info = (
@@ -175,8 +178,8 @@ def moonraker_exists(name: str = "") -> bool:
                 f"{info}. Please install Moonraker first!",
             ],
         )
-        return False
-    return True
+        return []
+    return mr_instances
 
 
 def trunc_string(input_str: str, length: int) -> str:

kiauh/utils/git_utils.py

@@ -7,7 +7,7 @@ from http.client import HTTPResponse
 from json import JSONDecodeError
 from pathlib import Path
 from subprocess import DEVNULL, PIPE, CalledProcessError, check_output, run
-from typing import List, Type
+from typing import List, Tuple, Type
 
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import Logger
@@ -70,7 +70,7 @@ def git_pull_wrapper(repo: str, target_dir: Path) -> None:
         return
 
 
-def get_repo_name(repo: Path) -> tuple[str, str] | None:
+def get_repo_name(repo: Path) -> Tuple[str, str]:
     """
     Helper method to extract the organisation and name of a repository |
     :param repo: repository to extract the values from
@@ -83,11 +83,14 @@ def get_repo_name(repo: Path) -> tuple[str, str] | None:
         cmd = ["git", "-C", repo.as_posix(), "config", "--get", "remote.origin.url"]
         result: str = check_output(cmd, stderr=DEVNULL).decode(encoding="utf-8")
         substrings: List[str] = result.strip().split("/")[-2:]
-        return substrings[0], substrings[1]
 
-        # return "/".join(substrings).replace(".git", "")
+        orga: str = substrings[0] if substrings[0] else "-"
+        name: str = substrings[1] if substrings[1] else "-"
+
+        return orga, name
+
     except CalledProcessError:
-        return None
+        return "-", "-"
 
 
 def get_local_tags(repo_path: Path, _filter: str | None = None) -> List[str]:
@@ -184,7 +187,7 @@ def compare_semver_tags(tag1: str, tag2: str) -> bool:
     if tag1 == tag2:
         return False
 
-    def parse_version(v):
+    def parse_version(v) -> List[int]:
         return list(map(int, v[1:].split(".")))
 
     tag1_parts = parse_version(tag1)

scripts/spoolman.sh

@@ -127,9 +127,9 @@ managed_services: Spoolman
   regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/moonraker\.asvc"
   moonraker_asvc=$(find "${HOME}" -maxdepth 2 -type f -regextype posix-extended -regex "${regex}" | sort)
 
-  if [[ -n ${moonraker_asvc} ]]; then
+  if ! grep -q "^Spoolman$" "${moonraker_asvc}"; then
     status_msg "Adding Spoolman service to moonraker.asvc..."
-    /bin/sh -c "echo 'Spoolman' >> ${moonraker_asvc}"
+    sed -i '$a''Spoolman' "${moonraker_asvc}"
   fi
 }
 
@@ -248,7 +248,7 @@ function get_spoolman_status() {
 
 function get_local_spoolman_version() {
   [[ ! -d "${SPOOLMAN_DIR}" ]] && return
-  
+
   local version
   version=$(grep -o '"version":\s*"[^"]*' "${SPOOLMAN_DIR}"/release_info.json | cut -d'"' -f4)
   echo "${version}"