jeka/OTGateway
1
0
Fork 0
mirror of https://github.com/Laxilef/OTGateway.git synced 2025-12-10 18:24:27 +05:00
Code Issues Packages Projects Releases Wiki Activity

upd readme, bump version

Browse Source
This commit is contained in:
Yurii
2023-11-17 22:14:45 +03:00
parent 7c5810e6d1
commit ee5c6fc953
3 changed files with 13 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
README.md
View File

@@ -89,7 +89,7 @@ The outdoor temperature sensor must be connected to the **TEMP1** connector, the
5. Set up a connection to your MQTT server: ip, port, user, password
6. Set up a **Opentherm pin IN** & **Opentherm pin OUT**. No change for my board. Typically used **IN** = 4, **OUT** = 5
7. Set up a **Outdoor sensor pin** & **Indoor sensor pin**. No change for my board.
8. if necessary, set up a the master member ID ([see more](#tested-on))
8. if necessary, set up a the Master Member ID ([see more](#tested-on))
9. Restart module (required after changing OT pins and/or sensors pins!)
After connecting to your wifi network, you can go to the setup page at the address that ESP8266 received.
@@ -165,6 +165,16 @@ If your boiler does not support the installation of an outdoor temperature senso
</details>
After these settings, you can enable the "Equitherm" and/or "PID" modes and configure them as described below.
## Troubleshooting
**Q:** Controller in monitor/readon mode (cannot set temperature, etc.)<br>
**A:** Try changing the "Master Member ID", this is most likely the problem. If you don't know which identifier is valid for your boiler, you need to use brute force.
**Q:** The boiler does not respond to setting the heating temperature.<br>
**A:** Try checking the "Opentherm summer/winter mode", "Opentherm CH2 enabled", "Opentherm heating CH1 to CH2" checkboxes one by one and all together on the "setup" page. If this doesn't work, see above.
**Q:** My boiler does not have a hot water heating function. How to turn it off?<br>
**A:** Uncheck "Opentherm DHW present" on the "setup" page.
## About modes
### Equitherm

2
platformio.ini
View File

@@ -25,7 +25,7 @@ lib_deps =
build_flags = -D PIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH -mtext-section-literals
upload_speed = 921600
monitor_speed = 115200
version = 1.3.3
version = 1.3.4
; Defaults
[esp8266_defaults]

2
src/defines.h
View File

@@ -1,4 +1,4 @@
#define OT_GATEWAY_VERSION "1.3.3"
#define OT_GATEWAY_VERSION "1.3.4"
#define OT_GATEWAY_REPO "https://github.com/Laxilef/OTGateway"
#define AP_SSID "OpenTherm Gateway"
#define AP_PASSWORD "otgateway123456"