mirror of
https://github.com/oducceu/klipper_configs.git
synced 2025-12-22 23:53:36 +05:00
148 lines
4.3 KiB
INI
148 lines
4.3 KiB
INI
################################################################################
|
|
# Board: MKS Robin Nano v1.1 (Flying Bear Reborn 2.0) / MKS Robin Nano v1.3 / MKS Robin Nano-S v1.3
|
|
# Printer: Flying Bear Reborn
|
|
# Config by ODUCCEU
|
|
################################################################################
|
|
# WARNING! DO NOT EDIT THIS FILE!
|
|
# To override settings from this file, you can copy and paste the relevant
|
|
# sections into your printer.cfg and change it there.
|
|
################################################################################
|
|
|
|
# Documentation
|
|
# https://www.klipper3d.org/Config_Reference.html
|
|
|
|
################################################################################
|
|
# X, Y, Z
|
|
################################################################################
|
|
|
|
[stepper_x]
|
|
step_pin: X_STEP_PIN
|
|
dir_pin: X_DIR_PIN
|
|
enable_pin: !X_ENABLE_PIN
|
|
rotation_distance: 40
|
|
microsteps: 16
|
|
endstop_pin: !X_STOP_PIN
|
|
position_min: 0
|
|
position_endstop: 0
|
|
position_max: 350 # X-axis bed size
|
|
homing_speed: 100
|
|
homing_retract_dist: 0 # disable for head retraction after homing
|
|
|
|
[stepper_y]
|
|
step_pin: Y_STEP_PIN
|
|
dir_pin: !Y_DIR_PIN
|
|
enable_pin: !Y_ENABLE_PIN
|
|
rotation_distance: 40
|
|
microsteps: 16
|
|
endstop_pin: !Y_STOP_PIN
|
|
position_min: 0
|
|
position_endstop: 0
|
|
position_max: 310 # Y-axis bed size
|
|
homing_speed: 100
|
|
homing_retract_dist: 0 # disable for head retraction after homing
|
|
|
|
[stepper_z] # left stepper
|
|
step_pin: Z1_STEP_PIN
|
|
dir_pin: !Z1_DIR_PIN
|
|
enable_pin: !Z1_ENABLE_PIN
|
|
rotation_distance: 8
|
|
microsteps: 16
|
|
endstop_pin: !Z1_STOP_PIN
|
|
position_max: 350 # Z-axis print volume size
|
|
homing_speed: 20
|
|
second_homing_speed: 5
|
|
|
|
[stepper_z1] # right stepper
|
|
step_pin: Z_STEP_PIN
|
|
dir_pin: !Z_DIR_PIN
|
|
enable_pin: !Z_ENABLE_PIN
|
|
rotation_distance: 8
|
|
microsteps: 16
|
|
endstop_pin: !Z_STOP_PIN
|
|
|
|
################################################################################
|
|
# E0, HB
|
|
################################################################################
|
|
|
|
[extruder]
|
|
step_pin: E0_STEP_PIN
|
|
dir_pin: !E0_DIR_PIN
|
|
enable_pin: !E0_ENABLE_PIN
|
|
rotation_distance: 7.600
|
|
microsteps: 16
|
|
nozzle_diameter: 0.400
|
|
filament_diameter: 1.750
|
|
max_extrude_only_distance: 100
|
|
heater_pin: E_HEATER_PIN
|
|
sensor_type: EPCOS 100K B57560G104F
|
|
sensor_pin: E_SENSOR_PIN
|
|
min_temp: 0
|
|
max_temp: 285
|
|
|
|
[heater_bed]
|
|
heater_pin: BED_HEATER_PIN
|
|
sensor_type: EPCOS 100K B57560G104F
|
|
sensor_pin: BED_SENSOR_PIN
|
|
min_temp: 0
|
|
max_temp: 130
|
|
|
|
################################################################################
|
|
# Fans
|
|
################################################################################
|
|
|
|
[fan]
|
|
pin: PARTCOOLING_FAN_PIN
|
|
|
|
[heater_fan heater_fan]
|
|
pin: HEATER_FAN_PIN
|
|
|
|
################################################################################
|
|
# Printer
|
|
################################################################################
|
|
|
|
[printer]
|
|
kinematics: corexy
|
|
max_velocity: 150
|
|
max_accel: 3000
|
|
max_accel_to_decel: 1500
|
|
max_z_velocity: 20
|
|
max_z_accel: 100
|
|
|
|
################################################################################
|
|
# Optional G-Code features
|
|
################################################################################
|
|
|
|
[virtual_sdcard]
|
|
path: ~/gcode_files
|
|
|
|
[pause_resume]
|
|
|
|
[display_status]
|
|
|
|
[firmware_retraction]
|
|
retract_speed: 40
|
|
unretract_speed: 40
|
|
|
|
[respond]
|
|
|
|
################################################################################
|
|
# Bed leveling
|
|
################################################################################
|
|
|
|
# Reference: distance from bed edge to screw center is 55mm on X axis and 50mm on Y.
|
|
# Bed size is 370x325mm and print area size is 355x310mm.
|
|
|
|
[bed_screws]
|
|
screw1: 45,42.5
|
|
screw1_name: front left screw
|
|
screw2: 305,42.5
|
|
screw2_name: front right screw
|
|
screw3: 305,267.5
|
|
screw3_name: back right screw
|
|
screw4: 45,267.5
|
|
screw4_name: back left screw
|
|
horizontal_move_z: 10
|
|
speed: 100
|
|
|
|
################################################################################
|