kiauh/tests/assets/klipper_config.txt

[mcu]
serial:
baud: 250000
canbus_uuid:
canbus_interface:
restart_method:
[printer]
kinematics:
max_velocity:
max_accel:
minimum_cruise_ratio: 0.5
square_corner_velocity: 5.0
max_accel_to_decel:
[stepper_x]
step_pin:
dir_pin:
enable_pin:
rotation_distance:
microsteps:
full_steps_per_rotation: 200
gear_ratio:
step_pulse_duration:
endstop_pin:
position_min: 0
position_endstop:
position_max:
homing_speed: 5.0
homing_retract_dist: 5.0
homing_retract_speed:
second_homing_speed:
homing_positive_dir:
[printer]
kinematics: cartesian
max_z_velocity:
max_z_accel:
[stepper_x]
[stepper_y]
[stepper_z]
[printer]
kinematics: delta
max_z_velocity:
max_z_accel:
minimum_z_position: 0
delta_radius:
print_radius:
[stepper_a]
position_endstop:
arm_length:
angle:
[stepper_b]
[stepper_c]
[delta_calibrate]
radius:
speed: 50
horizontal_move_z: 5
[printer]
kinematics: deltesian
max_z_velocity:
max_z_accel:
minimum_z_position: 0
min_angle: 5
print_width:
slow_ratio: 3
[stepper_left]
position_endstop:
arm_length:
arm_x_length:
[stepper_right]
[stepper_y]
[printer]
kinematics: corexy
max_z_velocity:
max_z_accel:
[stepper_x]
[stepper_y]
[stepper_z]
[printer]
kinematics: corexz
max_z_velocity:
max_z_accel:
[stepper_x]
[stepper_y]
[stepper_z]
[printer]
kinematics: hybrid_corexy
max_z_velocity:
max_z_accel:
[stepper_x]
[stepper_y]
[stepper_z]
[printer]
kinematics: hybrid_corexz
max_z_velocity:
max_z_accel:
[stepper_x]
[stepper_y]
[stepper_z]
[printer]
kinematics: polar
max_z_velocity:
max_z_accel:
[stepper_bed]
gear_ratio:
[stepper_arm]
[stepper_z]
[printer]
kinematics: rotary_delta
max_z_velocity:
minimum_z_position: 0
shoulder_radius:
shoulder_height:
[stepper_a]
gear_ratio:
position_endstop:
upper_arm_length:
lower_arm_length:
angle:
[stepper_b]
[stepper_c]
[delta_calibrate]
radius:
speed: 50
horizontal_move_z: 5
[printer]
kinematics: winch
[stepper_a]
rotation_distance:
anchor_x:
anchor_y:
anchor_z:
[printer]
kinematics: none
max_velocity: 1
max_accel: 1
[extruder]
step_pin:
dir_pin:
enable_pin:
microsteps:
rotation_distance:
full_steps_per_rotation:
gear_ratio:
nozzle_diameter:
filament_diameter:
max_extrude_cross_section:
instantaneous_corner_velocity: 1.000
max_extrude_only_distance: 50.0
max_extrude_only_velocity:
max_extrude_only_accel:
pressure_advance: 0.0
pressure_advance_smooth_time: 0.040
heater_pin:
max_power: 1.0
sensor_type:
sensor_pin:
pullup_resistor: 4700
smooth_time: 1.0
control:
pid_Kp:
pid_Ki:
pid_Kd:
max_delta: 2.0
pwm_cycle_time: 0.100
min_extrude_temp: 170
min_temp:
max_temp:
[heater_bed]
heater_pin:
sensor_type:
sensor_pin:
control:
min_temp:
max_temp:
[bed_mesh]
speed: 50
horizontal_move_z: 5
mesh_radius:
mesh_origin:
mesh_min:
mesh_max:
probe_count: 3, 3
round_probe_count: 5
fade_start: 1.0
fade_end: 0.0
fade_target:
split_delta_z: .025
move_check_distance: 5.0
mesh_pps: 2, 2
algorithm: lagrange
bicubic_tension: .2
zero_reference_position:
faulty_region_1_min:
faulty_region_1_max:
adaptive_margin:
scan_overshoot:
[bed_tilt]
x_adjust: 0
y_adjust: 0
z_adjust: 0
points:
speed: 50
horizontal_move_z: 5
[bed_screws]
screw1:
screw1_name:
screw1_fine_adjust:
screw2:
screw2_name:
screw2_fine_adjust:
horizontal_move_z: 5
probe_height: 0
speed: 50
probe_speed: 5
[screws_tilt_adjust]
screw1:
screw1_name:
screw2:
screw2_name:
speed: 50
horizontal_move_z: 5
screw_thread: CW-M3
[z_tilt]
z_positions:
points:
speed: 50
horizontal_move_z: 5
retries: 0
retry_tolerance: 0
[quad_gantry_level]
gantry_corners:
points:
speed: 50
horizontal_move_z: 5
max_adjust: 4
retries: 0
retry_tolerance: 0
[skew_correction]
[z_thermal_adjust]
temp_coeff:
smooth_time:
z_adjust_off_above:
max_z_adjustment:
sensor_type:
sensor_pin:
min_temp:
max_temp:
gcode_id:
[safe_z_home]
home_xy_position:
speed: 50.0
z_hop:
z_hop_speed: 15.0
move_to_previous: False
[homing_override]
gcode:
axes: xyz
set_position_x:
set_position_y:
set_position_z:
[endstop_phase stepper_z]
endstop_accuracy:
trigger_phase:
endstop_align_zero: False
[gcode_macro my_cmd]
gcode:
variable_<name>:
rename_existing:
description: G-Code macro
[delayed_gcode my_delayed_gcode]
gcode:
initial_duration: 0.0
[save_variables]
filename:
[idle_timeout]
gcode:
timeout: 600
[virtual_sdcard]
path:
on_error_gcode:
[sdcard_loop]
[force_move]
enable_force_move: False
[pause_resume]
recover_velocity: 50.
[firmware_retraction]
retract_length: 0
retract_speed: 20
unretract_extra_length: 0
unretract_speed: 10
[gcode_arcs]
resolution: 1.0
[respond]
default_type: echo
default_prefix: echo:
[exclude_object]
[input_shaper]
shaper_freq_x: 0
shaper_freq_y: 0
shaper_type: mzv
shaper_type_x:
shaper_type_y:
damping_ratio_x: 0.1
damping_ratio_y: 0.1
[adxl345]
cs_pin:
spi_speed: 5000000
spi_bus:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
axes_map: x, y, z
rate: 3200
[lis2dw]
cs_pin:
spi_speed: 5000000
spi_bus:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
axes_map: x, y, z
[mpu9250 my_accelerometer]
i2c_address:
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed: 400000
axes_map: x, y, z
[resonance_tester]
probe_points:
accel_chip:
accel_chip_x:
accel_chip_y:
max_smoothing:
min_freq: 5
max_freq: 133.33
accel_per_hz: 75
hz_per_sec: 1
[board_pins my_aliases]
mcu: mcu
aliases:
aliases_<name>:
[duplicate_pin_override]
pins:
[probe]
pin:
deactivate_on_each_sample: True
x_offset: 0.0
y_offset: 0.0
z_offset:
speed: 5.0
samples: 1
sampleretract_dist: 2.0
lift_speed:
samples_result: average
samples_tolerance: 0.100
samples_toleranceretries: 0
activate_gcode:
deactivate_gcode:
[bltouch]
sensor_pin:
control_pin:
pin_move_time: 0.680
stow_on_each_sample: True
probe_with_touch_mode: False
pin_up_reports_not_triggered: True
pin_up_touch_modereports_triggered: True
set_output_mode:
x_offset:
y_offset:
z_offset:
speed:
lift_speed:
samples:
sampleretract_dist:
samples_result:
samples_tolerance:
samples_toleranceretries:
[smart_effector]
pin:
control_pin:
probe_accel:
recovery_time: 0.4
x_offset:
y_offset:
z_offset:
speed:
samples:
sampleretract_dist:
samples_result:
samples_tolerance:
samples_toleranceretries:
activate_gcode:
deactivate_gcode:
deactivate_on_each_sample:
[probe_eddy_current my_eddy_probe]
sensor_type: ldc1612
intb_pin:
z_offset:
i2c_address:
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed:
x_offset:
y_offset:
speed:
lift_speed:
samples:
sampleretract_dist:
samples_result:
samples_tolerance:
samples_toleranceretries:
[axis_twist_compensation]
speed: 50
horizontal_move_z: 5
calibrate_start_x: 20
calibrate_end_x: 200
calibrate_y: 112.5
[stepper_z1]
step_pin:
dir_pin:
enable_pin:
microsteps:
rotation_distance:
endstop_pin:
[extruder1]
step_pin:
dir_pin:
shared_heater:
[dual_carriage]
axis:
safe_distance:
step_pin:
dir_pin:
enable_pin:
microsteps:
rotation_distance:
endstop_pin:
position_endstop:
position_min:
position_max:
[extruder_stepper my_extra_stepper]
extruder:
step_pin:
dir_pin:
enable_pin:
microsteps:
rotation_distance:
[manual_stepper my_stepper]
step_pin:
dir_pin:
enable_pin:
microsteps:
rotation_distance:
velocity:
accel:
endstop_pin:
[verify_heater heater_config_name]
max_error: 120
check_gain_time:
hysteresis: 5
heating_gain: 2
[homing_heaters]
steppers:
heaters:
[thermistor my_thermistor]
temperature1:
resistance1:
temperature2:
resistance2:
temperature3:
resistance3:
beta:
[adc_temperature my_sensor]
temperature1:
voltage1:
temperature2:
voltage2:
temperature1:
resistance1:
temperature2:
resistance2:
[heater_generic my_generic_heater]
gcode_id:
heater_pin:
max_power:
sensor_type:
sensor_pin:
smooth_time:
control:
pid_Kp:
pid_Ki:
pid_Kd:
pwm_cycle_time:
min_temp:
max_temp:
[temperature_sensor my_sensor]
sensor_type:
sensor_pin:
min_temp:
max_temp:
gcode_id:
[temperature_probe my_probe]
sensor_type:
sensor_pin:
min_temp:
max_temp:
smooth_time:
gcode_id:
speed:
horizontal_move_z:
resting_z:
calibration_position:
calibration_bed_temp:
calibration_extruder_temp:
extruder_heating_z: 50.
max_validation_temp: 60.
sensor_type:
sensor_pin:
pullup_resistor: 4700
inlineresistor: 0
sensor_type:
sensor_pin:
adc_voltage: 5.0
voltage_offset: 0
sensor_type: PT1000
sensor_pin:
pullup_resistor: 4700
sensor_type:
sensor_pin:
spi_speed: 4000000
spi_bus:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
tc_type: K
tc_use_50Hz_filter: False
tc_averaging_count: 1
rtd_nominal_r: 100
rtd_referencer: 430
rtd_num_of_wires: 2
rtd_use_50Hz_filter: False
sensor_type: BME280
i2c_address:
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed:
sensor_type: AHT10
i2c_address:
i2c_mcu:
i2c_bus:
i2c_speed:
aht10_report_time:
sensor_type:
i2c_address:
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed:
htu21d_hold_master:
htu21d_resolution:
htu21d_report_time:
i2c_address:
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed:
i2c_address:
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed:
lm75_report_time:
sensor_type: temperature_mcu
sensor_mcu: mcu
sensor_temperature1:
sensor_adc1:
sensor_temperature2:
sensor_adc2:
sensor_type: temperature_host
sensor_path:
sensor_type: DS18B20
serial_no:
ds18_report_time:
sensor_mcu:
sensor_type: temperature_combined
sensor_list:
combination_method:
maximum_deviation:
[fan]
pin:
max_power: 1.0
shutdown_speed: 0
cycle_time: 0.010
hardware_pwm: False
kick_start_time: 0.100
off_below: 0.0
tachometer_pin:
tachometer_ppr: 2
tachometer_poll_interval: 0.0015
enable_pin:
[heater_fan heatbreak_cooling_fan]
pin:
max_power:
shutdown_speed:
cycle_time:
hardware_pwm:
kick_start_time:
off_below:
tachometer_pin:
tachometer_ppr:
tachometer_poll_interval:
enable_pin:
heater: extruder
heater_temp: 50.0
fan_speed: 1.0
[controller_fan my_controller_fan]
pin:
max_power:
shutdown_speed:
cycle_time:
hardware_pwm:
kick_start_time:
off_below:
tachometer_pin:
tachometer_ppr:
tachometer_poll_interval:
enable_pin:
fan_speed: 1.0
idle_timeout:
idle_speed:
heater:
stepper:
[temperature_fan my_temp_fan]
pin:
max_power:
shutdown_speed:
cycle_time:
hardware_pwm:
kick_start_time:
off_below:
tachometer_pin:
tachometer_ppr:
tachometer_poll_interval:
enable_pin:
sensor_type:
sensor_pin:
control:
max_delta:
min_temp:
max_temp:
pid_Kp:
pid_Ki:
pid_Kd:
pid_deriv_time: 2.0
target_temp: 40.0
max_speed: 1.0
min_speed: 0.3
gcode_id:
[fan_generic extruder_partfan]
pin:
max_power:
shutdown_speed:
cycle_time:
hardware_pwm:
kick_start_time:
off_below:
tachometer_pin:
tachometer_ppr:
tachometer_poll_interval:
enable_pin:
[led my_led]
red_pin:
green_pin:
blue_pin:
white_pin:
cycle_time: 0.010
hardware_pwm: False
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 0.0
initial_WHITE: 0.0
[neopixel my_neopixel]
pin:
chain_count:
color_order: GRB
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 0.0
initial_WHITE: 0.0
[dotstar my_dotstar]
data_pin:
clock_pin:
chain_count:
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 0.0
[pca9533 my_pca9533]
i2c_address: 98
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed:
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 0.0
initial_WHITE: 0.0
[pca9632 my_pca9632]
i2c_address: 98
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed:
scl_pin:
sda_pin:
color_order: RGBW
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 0.0
initial_WHITE: 0.0
[servo my_servo]
pin:
maximum_servo_angle: 180
minimum_pulse_width: 0.001
maximum_pulse_width: 0.002
initial_angle:
initial_pulse_width:
[gcode_button my_gcode_button]
pin:
analog_range:
analog_pullup_resistor:
press_gcode:
release_gcode:
[output_pin my_pin]
pin:
pwm: False
value:
shutdown_value:
cycle_time: 0.100
hardware_pwm: False
scale:
maximum_mcu_duration:
static_value:
[pwm_tool my_tool]
pin:
maximum_mcu_duration:
value:
shutdown_value:
cycle_time: 0.100
hardware_pwm: False
scale:
[pwm_cycle_time my_pin]
pin:
value:
shutdown_value:
cycle_time: 0.100
scale:
[static_digital_output my_output_pins]
pins:
[multi_pin my_multi_pin]
pins:
[tmc2130 stepper_x]
cs_pin:
spi_speed:
spi_bus:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
chain_position:
chain_length:
interpolate: True
run_current:
hold_current:
senseresistor: 0.110
stealthchop_threshold: 0
coolstep_threshold:
high_velocity_threshold:
driver_MSLUT0: 2863314260
driver_MSLUT1: 1251300522
driver_MSLUT2: 608774441
driver_MSLUT3: 269500962
driver_MSLUT4: 4227858431
driver_MSLUT5: 3048961917
driver_MSLUT6: 1227445590
driver_MSLUT7: 4211234
driver_W0: 2
driver_W1: 1
driver_W2: 1
driver_W3: 1
driver_X1: 128
driver_X2: 255
driver_X3: 255
driver_START_SIN: 0
driver_START_SIN90: 247
driver_IHOLDDELAY: 8
driver_TPOWERDOWN: 0
driver_TBL: 1
driver_TOFF: 4
driver_HEND: 7
driver_HSTRT: 0
driver_VHIGHFS: 0
driver_VHIGHCHM: 0
driver_PWM_AUTOSCALE: True
driver_PWM_FREQ: 1
driver_PWM_GRAD: 4
driver_PWM_AMPL: 128
driver_SGT: 0
driver_SEMIN: 0
driver_SEUP: 0
driver_SEMAX: 0
driver_SEDN: 0
driver_SEIMIN: 0
driver_SFILT: 0
diag0_pin:
diag1_pin:
[tmc2208 stepper_x]
uart_pin:
tx_pin:
select_pins:
interpolate: True
run_current:
hold_current:
sense_resistor: 0.110
stealthchop_threshold: 0
driver_MULTISTEP_FILT: True
driver_IHOLDDELAY: 8
driver_TPOWERDOWN: 20
driver_TBL: 2
driver_TOFF: 3
driver_HEND: 0
driver_HSTRT: 5
driver_PWM_AUTOGRAD: True
driver_PWM_AUTOSCALE: True
driver_PWM_LIM: 12
driver_PWM_REG: 8
driver_PWM_FREQ: 1
driver_PWM_GRAD: 14
driver_PWM_OFS: 36
[tmc2209 stepper_x]
uart_pin:
tx_pin:
select_pins:
interpolate: True
run_current:
hold_current:
sense_resistor: 0.110
stealthchop_threshold: 0
coolstep_threshold:
uart_address:
driver_MULTISTEP_FILT: True
driver_IHOLDDELAY: 8
driver_TPOWERDOWN: 20
driver_TBL: 2
driver_TOFF: 3
driver_HEND: 0
driver_HSTRT: 5
driver_PWM_AUTOGRAD: True
driver_PWM_AUTOSCALE: True
driver_PWM_LIM: 12
driver_PWM_REG: 8
driver_PWM_FREQ: 1
driver_PWM_GRAD: 14
driver_PWM_OFS: 36
driver_SGTHRS: 0
driver_SEMIN: 0
driver_SEUP: 0
driver_SEMAX: 0
driver_SEDN: 0
driver_SEIMIN: 0
diag_pin:
[tmc2660 stepper_x]
cs_pin:
spi_speed: 4000000
spi_bus:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
interpolate: True
run_current:
sense_resistor:
idle_current_percent: 100
driver_TBL: 2
driver_RNDTF: 0
driver_HDEC: 0
driver_CHM: 0
driver_HEND: 3
driver_HSTRT: 3
driver_TOFF: 4
driver_SEIMIN: 0
driver_SEDN: 0
driver_SEMAX: 0
driver_SEUP: 0
driver_SEMIN: 0
driver_SFILT: 0
driver_SGT: 0
driver_SLPH: 0
driver_SLPL: 0
driver_DISS2G: 0
driver_TS2G: 3
[tmc2240 stepper_x]
cs_pin:
spi_speed:
spi_bus:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
uart_pin:
chain_position:
chain_length:
interpolate: True
run_current:
hold_current:
rref: 12000
stealthchop_threshold: 0
coolstep_threshold:
high_velocity_threshold:
driver_MSLUT0: 2863314260
driver_MSLUT1: 1251300522
driver_MSLUT2: 608774441
driver_MSLUT3: 269500962
driver_MSLUT4: 4227858431
driver_MSLUT5: 3048961917
driver_MSLUT6: 1227445590
driver_MSLUT7: 4211234
driver_W0: 2
driver_W1: 1
driver_W2: 1
driver_W3: 1
driver_X1: 128
driver_X2: 255
driver_X3: 255
driver_START_SIN: 0
driver_START_SIN90: 247
driver_OFFSET_SIN90: 0
driver_MULTISTEP_FILT: True
driver_IHOLDDELAY: 6
driver_IRUNDELAY: 4
driver_TPOWERDOWN: 10
driver_TBL: 2
driver_TOFF: 3
driver_HEND: 2
driver_HSTRT: 5
driver_FD3: 0
driver_TPFD: 4
driver_CHM: 0
driver_VHIGHFS: 0
driver_VHIGHCHM: 0
driver_DISS2G: 0
driver_DISS2VS: 0
driver_PWM_AUTOSCALE: True
driver_PWM_AUTOGRAD: True
driver_PWM_FREQ: 0
driver_FREEWHEEL: 0
driver_PWM_GRAD: 0
driver_PWM_OFS: 29
driver_PWM_REG: 4
driver_PWM_LIM: 12
driver_SGT: 0
driver_SEMIN: 0
driver_SEUP: 0
driver_SEMAX: 0
driver_SEDN: 0
driver_SEIMIN: 0
driver_SFILT: 0
driver_SG4_ANGLE_OFFSET: 1
diag0_pin:
diag1_pin:
[tmc5160 stepper_x]
cs_pin:
spi_speed:
spi_bus:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
chain_position:
chain_length:
interpolate: True
run_current:
hold_current:
sense_resistor: 0.075
stealthchop_threshold: 0
coolstep_threshold:
high_velocity_threshold:
driver_MSLUT0: 2863314260
driver_MSLUT1: 1251300522
driver_MSLUT2: 608774441
driver_MSLUT3: 269500962
driver_MSLUT4: 4227858431
driver_MSLUT5: 3048961917
driver_MSLUT6: 1227445590
driver_MSLUT7: 4211234
driver_W0: 2
driver_W1: 1
driver_W2: 1
driver_W3: 1
driver_X1: 128
driver_X2: 255
driver_X3: 255
driver_START_SIN: 0
driver_START_SIN90: 247
driver_MULTISTEP_FILT: True
driver_IHOLDDELAY: 6
driver_TPOWERDOWN: 10
driver_TBL: 2
driver_TOFF: 3
driver_HEND: 2
driver_HSTRT: 5
driver_FD3: 0
driver_TPFD: 4
driver_CHM: 0
driver_VHIGHFS: 0
driver_VHIGHCHM: 0
driver_DISS2G: 0
driver_DISS2VS: 0
driver_PWM_AUTOSCALE: True
driver_PWM_AUTOGRAD: True
driver_PWM_FREQ: 0
driver_FREEWHEEL: 0
driver_PWM_GRAD: 0
driver_PWM_OFS: 30
driver_PWM_REG: 4
driver_PWM_LIM: 12
driver_SGT: 0
driver_SEMIN: 0
driver_SEUP: 0
driver_SEMAX: 0
driver_SEDN: 0
driver_SEIMIN: 0
driver_SFILT: 0
driver_DRVSTRENGTH: 0
driver_BBMCLKS: 4
driver_BBMTIME: 0
driver_FILT_ISENSE: 0
diag0_pin:
diag1_pin:
[ad5206 my_digipot]
enable_pin:
spi_speed:
spi_bus:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
channel_1:
channel_2:
channel_3:
channel_4:
channel_5:
channel_6:
scale:
[mcp4451 my_digipot]
i2c_address:
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed:
wiper_0:
wiper_1:
wiper_2:
wiper_3:
scale:
[mcp4728 my_dac]
i2c_address: 96
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed:
channel_a:
channel_b:
channel_c:
channel_d:
scale:
[mcp4018 my_digipot]
scl_pin:
sda_pin:
wiper:
scale:
[display]
lcd_type:
display_group:
menu_timeout:
menu_root:
menu_reverse_navigation:
encoder_pins:
encoder_steps_per_detent:
click_pin:
back_pin:
up_pin:
down_pin:
kill_pin:
analog_pullup_resistor: 4700
analog_range_click_pin:
analog_range_back_pin:
analog_range_up_pin:
analog_range_down_pin:
analog_range_kill_pin:
[display]
lcd_type: hd44780
rs_pin:
e_pin:
d4_pin:
d5_pin:
d6_pin:
d7_pin:
hd44780_protocol_init: True
line_length:
[display]
lcd_type: hd44780_spi
latch_pin:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
hd44780_protocol_init: True
line_length:
[display]
lcd_type: st7920
cs_pin:
sclk_pin:
sid_pin:
[display]
lcd_type: emulated_st7920
en_pin:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
[display]
lcd_type: uc1701
cs_pin:
a0_pin:
rst_pin:
contrast:
[display]
lcd_type:
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed:
cs_pin:
dc_pin:
spi_speed:
spi_bus:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
reset_pin:
contrast:
vcomh: 0
invert: False
x_offset: 0
[display_data my_group_name my_data_name]
position:
text:
[display_template my_template_name]
param_<name>:
text:
[display_glyph my_display_glyph]
data:
hd44780_data:
hd44780_slot:
[menu __some_list __some_name]
type: disabled
[menu some_name]
type:
name:
enable:
index:
[menu some_list]
type: list
name:
enable:
[menu some_list some_command]
type: command
name:
enable:
gcode:
[menu some_list some_input]
type: input
name:
enable:
input:
input_min:
input_max:
input_step:
realtime:
gcode:
[filament_switch_sensor my_sensor]
pause_on_runout: True
runout_gcode:
insert_gcode:
event_delay: 3.0
pause_delay: 0.5
switch_pin:
[filament_motion_sensor my_sensor]
detection_length: 7.0
extruder:
switch_pin:
pause_on_runout:
runout_gcode:
insert_gcode:
event_delay:
pause_delay:
[tsl1401cl_filament_width_sensor]
pin:
default_nominal_filament_diameter: 1.75
max_difference: 0.2
measurement_delay: 100
[hall_filament_width_sensor]
adc1:
adc2:
cal_dia1: 1.50
cal_dia2: 2.00
raw_dia1: 9500
raw_dia2: 10500
default_nominal_filament_diameter: 1.75
max_difference: 0.200
measurement_delay: 70
enable: False
measurement_interval: 10
logging: False
min_diameter: 1.0
max_diameter:
use_current_dia_while_delay: False
pause_on_runout:
runout_gcode:
insert_gcode:
event_delay:
pause_delay:
[load_cell]
sensor_type:
[load_cell]
sensor_type: hx711
sclk_pin:
dout_pin:
gain: A-128
sample_rate: 80
[load_cell]
sensor_type: hx717
sclk_pin:
dout_pin:
gain: A-128
sample_rate: 320
[load_cell]
sensor_type: ads1220
cs_pin:
spi_speed: 512000
spi_bus:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
data_ready_pin:
gain: 128
sample_rate: 660
[sx1509 my_sx1509]
i2c_address:
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed:
[samd_sercom my_sercom]
sercom:
tx_pin:
rx_pin:
clk_pin:
[adc_scaled my_name]
vref_pin:
vssa_pin:
smooth_time: 2.0
[replicape]
revision:
enable_pin: !gpio0_20
host_mcu:
standstill_power_down: False
stepper_x_microstep_mode:
stepper_y_microstep_mode:
stepper_z_microstep_mode:
stepper_e_microstep_mode:
stepper_h_microstep_mode:
stepper_x_current:
stepper_y_current:
stepper_z_current:
stepper_e_current:
stepper_h_current:
stepper_x_chopper_off_time_high:
stepper_y_chopper_off_time_high:
stepper_z_chopper_off_time_high:
stepper_e_chopper_off_time_high:
stepper_h_chopper_off_time_high:
stepper_x_chopper_hysteresis_high:
stepper_y_chopper_hysteresis_high:
stepper_z_chopper_hysteresis_high:
stepper_e_chopper_hysteresis_high:
stepper_h_chopper_hysteresis_high:
stepper_x_chopper_blank_time_high:
stepper_y_chopper_blank_time_high:
stepper_z_chopper_blank_time_high:
stepper_e_chopper_blank_time_high:
stepper_h_chopper_blank_time_high:
[palette2]
serial:
baud: 115200
feedrate_splice: 0.8
feedrate_normal: 1.0
auto_load_speed: 2
auto_cancel_variation: 0.1
[angle my_angle_sensor]
sensor_type:
sample_period: 0.000400
stepper:
cs_pin:
spi_speed:
spi_bus:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
spi_speed:
spi_bus:
spi_software_sclk_pin:
spi_software_mosi_pin:
spi_software_miso_pin:
i2c_address:
i2c_mcu:
i2c_bus:
i2c_software_scl_pin:
i2c_software_sda_pin:
i2c_speed: