mirror of
https://github.com/dw-0/kiauh.git
synced 2025-12-13 18:44:29 +05:00
143 lines
4.0 KiB
Markdown
143 lines
4.0 KiB
Markdown
# **KIAUH - Klipper Installation And Update Helper**
|
||
|
||
|
||
|
||
---
|
||
|
||
## **📋 Please see the [Changelog](docs/changelog.md) for possible important information !**
|
||
|
||
---
|
||
|
||
## **📢 Disclaimer: Usage of this script happens at your own risk!**
|
||
|
||
This script acts as a helping hand for you to get set up in a fast and comfortable way.\
|
||
**This does not mean, it will relieve you of using your brain.exe! 🧠**\
|
||
Please also always pay attention to the individual component repositories (all linked below).\
|
||
Feel free to give it a try. If you have suggestions or encounter any problems, please report them.
|
||
|
||
---
|
||
|
||
## **🛠️ Instructions:**
|
||
|
||
For downloading this script it is necessary to have git installed.\
|
||
If you haven't, please run `sudo apt-get install git -y` to install git first.\
|
||
You will need it anyways! 😄
|
||
|
||
After git is installed, use the following commands in the given order to download and execute the script:
|
||
|
||
```shell
|
||
cd ~
|
||
git clone https://github.com/th33xitus/kiauh.git
|
||
./kiauh/kiauh.sh
|
||
```
|
||
|
||
---
|
||
|
||
## **🧰 Functions and Features:**
|
||
|
||
- **New in v3.0.0:** You can now install multiple instances (Klipper/Moonraker/DWC/Octoprint) on the same Pi!
|
||
---
|
||
### **Core Functions:**
|
||
|
||
- **Installing** Klipper to your Raspberry Pi or other Debian based Linux Distribution.
|
||
- **Installing** of the Moonraker API (needed for Mainsail, Fluidd and KlipperScreen)
|
||
- **Installing** several different web interfaces such as Mainsail, Fluidd, Duet Web Control or OctoPrint including their dependencies.
|
||
- **Installing** of KlipperScreen (OctoScreen but for Klipper!)
|
||
- **Updating** of all the listed installations above excluding OctoPrint. For updating OctoPrint, please use the OctoPrint interface!
|
||
- **Removing** of all the listed installations above.
|
||
- **Backup** of all the listed installations above.
|
||
|
||
### **Also possible:**
|
||
|
||
- Build the Klipper Firmware
|
||
- Flash the MCU
|
||
- Read ID of the currently connected MCU
|
||
- and more ...
|
||
|
||
### **For a list of additional features please see: [Feature List](docs/features.md)**
|
||
|
||
---
|
||
|
||
## **📝 Notes:**
|
||
|
||
- Tested **only** on Raspberry Pi OS Lite (Debian 10 Buster)
|
||
- Other Debian based distributions can work
|
||
- Reported to work on Armbian too
|
||
- During the use of this script you might be asked for your sudo password. There are several functions involved which need sudo privileges.
|
||
|
||
---
|
||
|
||
## **🛈 Sources & Further Information**
|
||
|
||
For more information or instructions to the various components KIAUH can install, please check out the corresponding repositories listed below:
|
||
|
||
---
|
||
|
||
### **⛵Klipper** by [KevinOConnor](https://github.com/KevinOConnor) :
|
||
|
||
https://github.com/KevinOConnor/klipper
|
||
|
||
---
|
||
|
||
### **⛵Klipper S-Curve fork** by [dmbutyugin](https://github.com/dmbutyugin) :
|
||
|
||
https://github.com/dmbutyugin/klipper/tree/scurve-smoothing \
|
||
https://github.com/dmbutyugin/klipper/tree/scurve-shaping
|
||
|
||
---
|
||
|
||
### **🌙Moonraker** by [Arksine](https://github.com/Arksine) :
|
||
|
||
https://github.com/Arksine/moonraker
|
||
|
||
---
|
||
|
||
### **💨Mainsail Webinterface** by [meteyou](https://github.com/meteyou) :
|
||
|
||
https://github.com/meteyou/mainsail
|
||
|
||
---
|
||
|
||
### **🌊Fluidd Webinterface** by [cadriel](https://github.com/cadriel) :
|
||
|
||
https://github.com/cadriel/fluidd
|
||
|
||
---
|
||
|
||
### **🕸️Duet Web Control** by [Duet3D](https://github.com/Duet3D) :
|
||
|
||
https://github.com/Duet3D/DuetWebControl
|
||
|
||
---
|
||
|
||
### **🕸️DWC2-for-Klipper-Socket** by [Stephan3](https://github.com/Stephan3) :
|
||
|
||
https://github.com/Stephan3/dwc2-for-klipper-socket
|
||
|
||
---
|
||
|
||
### **🖥️KlipperScreen** by [jordanruthe](https://github.com/jordanruthe) :
|
||
|
||
https://github.com/jordanruthe/KlipperScreen
|
||
|
||
---
|
||
|
||
### **🐙OctoPrint Webinterface** by [OctoPrint](https://github.com/OctoPrint) :
|
||
|
||
https://octoprint.org \
|
||
https://github.com/OctoPrint/OctoPrint
|
||
|
||
---
|
||
|
||
### **🔬PrettyGCode for Klipper** by [Kragrathea](https://github.com/Kragrathea) :
|
||
|
||
https://github.com/Kragrathea/pgcode
|
||
|
||
---
|
||
|
||
## **❓ FAQ**
|
||
|
||
**_Q: Can i use this script to install multiple instances of Klipper on the same Pi? (Multisession?)_**
|
||
|
||
**A:** Yes, it is finally possible 🙂
|