feat(tests): load live VM host/key from .env, keep inventory non-sensitive

feat(tests): implement live VM acceptance test strategy (TODO-006 to TODO-010)
feat(tests): add unit tests for shared utilities
2026-11-02 21:38:44 +05:00 · 2026-07-04 14:11:01 +02:00 · 2026-07-04 13:38:52 +02:00 · 2026-07-04 12:58:20 +02:00 · 2026-06-29 22:43:10 +02:00 · 2026-06-29 22:20:55 +02:00
136 changed files with 4710 additions and 896 deletions
@@ -7,6 +7,7 @@
 *.tmp
 __pycache__
 .kiauh-env
+.venv
 *.code-workspace
 *.iml
 kiauh.cfg
@@ -122,9 +122,9 @@ changes!**

 <hr>

-<h2 align="center">🌐 Sources & Further Information</h2>
+<h2 align="center">⚙️ Core Components ⚙️</h2>

-<table align="center">
+<table align="center" style="text-align: center;">
 <tr>
    <th><h3><a href="https://github.com/Klipper3d/klipper">Klipper</a></h3></th>
    <th><h3><a href="https://github.com/Arksine/moonraker">Moonraker</a></h3></th>
@@ -140,67 +140,88 @@ changes!**
    <th>by <a href="https://github.com/Arksine">Arksine</a></th>
    <th>by <a href="https://github.com/mainsail-crew">mainsail-crew</a></th>
 </tr>
-
 <tr>
    <th><h3><a href="https://github.com/fluidd-core/fluidd">Fluidd</a></h3></th>
    <th><h3><a href="https://github.com/KlipperScreen/KlipperScreen">KlipperScreen</a></h3></th>
-    <th><h3><a href="https://github.com/OctoPrint/OctoPrint">OctoPrint</a></h3></th>
+    <th></th>
 </tr>
 <tr>
-    <th><img src="https://raw.githubusercontent.com/fluidd-core/fluidd/master/docs/assets/images/logo.svg" alt="Fluidd Logo" height="64"></th>
-    <th><img src="https://avatars.githubusercontent.com/u/31575189?v=4" alt="jordanruthe avatar" height="64"></th>
-    <th><img src="https://raw.githubusercontent.com/OctoPrint/OctoPrint/master/docs/images/octoprint-logo.png" alt="OctoPrint Logo" height="64"></th>
+    <th><img src="https://raw.githubusercontent.com/fluidd-core/fluidd/master/docs/docs/assets/images/logo.svg" alt="Fluidd Logo" height="64"></th>
+    <th><img src="https://avatars.githubusercontent.com/KlipperScreen?v=4" alt="KlipperScreen Logo" height="64"></th>
+    <th></th>
 </tr>
 <tr>
    <th>by <a href="https://github.com/fluidd-core">fluidd-core</a></th>
    <th>by <a href="https://github.com/alfrix">alfrix</a></th>
-    <th>by <a href="https://github.com/OctoPrint">OctoPrint</a></th>
+    <th></th>
 </tr>
+</table>

+<hr>
+
+<h2 align="center">🧩 Community Extensions 🧩</h2>
+
+<table align="center" style="text-align: center;">
 <tr>
+    <th><h3><a href="https://github.com/OctoPrint/OctoPrint">OctoPrint</a></h3></th>
    <th><h3><a href="https://github.com/nlef/moonraker-telegram-bot">Moonraker-Telegram-Bot</a></h3></th>
    <th><h3><a href="https://github.com/Kragrathea/pgcode">PrettyGCode for Klipper</a></h3></th>
-    <th><h3><a href="https://github.com/TheSpaghettiDetective/moonraker-obico">Obico for Klipper</a></h3></th>
 </tr>
 <tr>
-    <th><img src="https://avatars.githubusercontent.com/u/52351624?v=4" alt="nlef avatar" height="64"></th>
-    <th><img src="https://avatars.githubusercontent.com/u/5917231?v=4" alt="Kragrathea avatar" height="64"></th>
-    <th><img src="https://avatars.githubusercontent.com/u/46323662?s=200&v=4" alt="Obico logo" height="64"></th>
+    <th><a href="https://github.com/OctoPrint/OctoPrint"><img src="https://raw.githubusercontent.com/OctoPrint/OctoPrint/master/docs/images/octoprint-logo.png" alt="OctoPrint Logo" height="64"></a></th>
+    <th><a href="https://github.com/nlef/moonraker-telegram-bot"><img src="https://avatars.githubusercontent.com/u/52351624?v=4" alt="nlef avatar" height="64"></a></th>
+    <th><a href="https://github.com/Kragrathea/pgcode"><img src="https://avatars.githubusercontent.com/u/5917231?v=4" alt="Kragrathea avatar" height="64"></a></th>
 </tr>
 <tr>
+    <th>by <a href="https://github.com/OctoPrint">OctoPrint</a></th>
    <th>by <a href="https://github.com/nlef">nlef</a></th>
    <th>by <a href="https://github.com/Kragrathea">Kragrathea</a></th>
-    <th>by <a href="https://github.com/TheSpaghettiDetective">Obico</a></th>
 </tr>
-
 <tr>
+    <th><h3><a href="https://github.com/TheSpaghettiDetective/moonraker-obico">Obico for Klipper</a></h3></th>
    <th><h3><a href="https://github.com/Clon1998/mobileraker_companion">Mobileraker's Companion</a></h3></th>
    <th><h3><a href="https://octoeverywhere.com/?source=kiauh_readme">OctoEverywhere For Klipper</a></h3></th>
-    <th><h3><a href="https://github.com/crysxd/OctoApp-Plugin">OctoApp For Klipper</a></h3></th>
 </tr>
 <tr>
+    <th><a href="https://github.com/TheSpaghettiDetective/moonraker-obico"><img src="https://avatars.githubusercontent.com/u/46323662?s=200&v=4" alt="Obico logo" height="64"></a></th>
    <th><a href="https://github.com/Clon1998/mobileraker_companion"><img src="https://raw.githubusercontent.com/Clon1998/mobileraker/master/assets/icon/mr_appicon.png" alt="Mobileraker Logo" height="64"></a></th>
    <th><a href="https://octoeverywhere.com/?source=kiauh_readme"><img src="https://octoeverywhere.com/img/logo.svg" alt="OctoEverywhere Logo" height="64"></a></th>
-    <th><a href="https://octoapp.eu/?source=kiauh_readme"><img src="https://octoapp.eu/octoapp.webp" alt="OctoApp Logo" height="64"></a></th>
 </tr>
 <tr>
+    <th>by <a href="https://github.com/TheSpaghettiDetective">Obico</a></th>
    <th>by <a href="https://github.com/Clon1998">Patrick Schmidt</a></th>
    <th>by <a href="https://github.com/QuinnDamerell">Quinn Damerell</a></th>
-    <th>by <a href="https://github.com/crysxd">Christian Würthner</a></th>
 </tr>
-
 <tr>
+    <th><h3><a href="https://github.com/crysxd/OctoApp-Plugin">OctoApp For Klipper</a></h3></th>
    <th><h3><a href="https://github.com/staubgeborener/klipper-backup">Klipper-Backup</a></h3></th>
    <th><h3><a href="https://simplyprint.io/">SimplyPrint for Klipper</a></h3></th>
 </tr>
 <tr>
+    <th><a href="https://octoapp.eu/?source=kiauh_readme"><img src="https://octoapp.eu/octoapp.webp" alt="OctoApp Logo" height="64"></a></th>
    <th><a href="https://github.com/staubgeborener/klipper-backup"><img src="https://avatars.githubusercontent.com/u/28908603?v=4" alt="Staubgeroner Avatar" height="64"></a></th>
-    <th><a href="https://github.com/SimplyPrint"><img src="https://avatars.githubusercontent.com/u/64896552?s=200&v=4" alt="" height="64"></a></th>
+    <th><a href="https://github.com/SimplyPrint"><img src="https://avatars.githubusercontent.com/u/64896552?s=200&v=4" alt="SimplyPrint Logo" height="64"></a></th>
 </tr>
 <tr>
+    <th>by <a href="https://github.com/crysxd">Christian Würthner</a></th>
    <th>by <a href="https://github.com/Staubgeborener">Staubgeborener</a></th>
    <th>by <a href="https://github.com/SimplyPrint">SimplyPrint</a></th>
 </tr>
+<tr>
+    <th><h3><a href="https://github.com/CodeMasterCody3D/DroidKlipp">DroidKlipp</a></h3></th>
+    <th><h3><a href="https://github.com/PEEKYPAUL/Moongate">Moongate</a></h3></th>
+    <th></th>
+</tr>
+<tr>
+    <th><a href="https://github.com/CodeMasterCody3D/DroidKlipp"><img src="https://raw.githubusercontent.com/CodeMasterCody3D/DroidKlipp/main/logo.png" alt="DroidKlipp Logo" height="64"></a></th>
+    <th><a href="https://github.com/PEEKYPAUL/Moongate"><img src="https://raw.githubusercontent.com/PEEKYPAUL/Moongate/master/docs/moongate-icon.png" alt="Moongate Logo" height="64"></a></th>
+    <th></th>
+</tr>
+<tr>
+    <th>by <a href="https://github.com/CodeMasterCody3D">CodeMasterCody3D</a></th>
+    <th>by <a href="https://github.com/PEEKYPAUL">PEEKYPAUL</a></th>
+    <th></th>
+</tr>
 </table>

 <hr>
@@ -229,13 +250,3 @@ changes!**
  a [Ko-fi](https://ko-fi.com/dw__0) !
 * Last but not least: Thank you to all contributors and members of the Klipper
  Community who like and share this project!
-
-<hr>
-
-<h4 align="center">A special thank you to JetBrains for sponsoring this project
-with their incredible software!</h4>
-<p align="center">
-  <a href="https://www.jetbrains.com/community/opensource/#support" target="_blank">
-    <img src="https://resources.jetbrains.com/storage/products/company/brand/logos/jb_beam.png" alt="JetBrains Logo (Main) logo." height="128">
-  </a>
-</p>
@@ -2,7 +2,7 @@

 <p align="center">
  <a>
-    <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/kiauh.png" alt="KIAUH logo" height="181">
+    <img src="docs/assets/logo-large.png" alt="KIAUH logo" height="181">
    <h1 align="center">Klipper Installation And Update Helper</h1>
  </a>
 </p>
@@ -34,13 +34,13 @@ KIAUH 是一个帮助您在 Linux 系统上安装 Klipper 的脚本工具，
 选择 `Choose OS -> Raspberry Pi OS (other)`:

 <p align="center">
-  <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/rpi_imager1.png" alt="KIAUH logo" height="350">
+  <img src="docs/assets/rpi_imager1.png" alt="KIAUH logo" height="350">
 </p>

 * 然后选择 `Raspberry Pi OS Lite (32位)` (或如果您想使用64位版本):

 <p align="center">
-  <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/rpi_imager2.png" alt="KIAUH logo" height="350">
+  <img src="docs/assets/rpi_imager2.png" alt="KIAUH logo" height="350">
 </p>

 * 返回 Raspberry Pi Imager 主界面，选择对应的 SD 卡作为写入目标。
@@ -99,9 +99,9 @@ cd ~ && git clone https://github.com/dw-0/kiauh.git
 您会被要求输入 sudo 密码。
 因为有几个功能需要 sudo 权限。

-## 🌐 相关资源与更多信息
+<h2 align="center">⚙️ 核心组件 ⚙️</h2>

-<table align="center">
+<table align="center" style="text-align: center;">
 <tr>
    <th><h3><a href="https://github.com/Klipper3d/klipper">Klipper</a></h3></th>
    <th><h3><a href="https://github.com/Arksine/moonraker">Moonraker</a></h3></th>
@@ -117,70 +117,93 @@ cd ~ && git clone https://github.com/dw-0/kiauh.git
    <th>由 <a href="https://github.com/Arksine">Arksine</a></th>
    <th>由 <a href="https://github.com/mainsail-crew">mainsail-crew</a></th>
 </tr>
-
 <tr>
    <th><h3><a href="https://github.com/fluidd-core/fluidd">Fluidd</a></h3></th>
-    <th><h3><a href="https://github.com/jordanruthe/KlipperScreen">KlipperScreen</a></h3></th>
-    <th><h3><a href="https://github.com/OctoPrint/OctoPrint">OctoPrint</a></h3></th>
+    <th><h3><a href="https://github.com/KlipperScreen/KlipperScreen">KlipperScreen</a></h3></th>
+    <th></th>
 </tr>
 <tr>
-    <th><img src="https://raw.githubusercontent.com/fluidd-core/fluidd/master/docs/assets/images/logo.svg" alt="Fluidd Logo" height="64"></th>
-    <th><img src="https://avatars.githubusercontent.com/u/31575189?v=4" alt="jordanruthe avatar" height="64"></th>
-    <th><img src="https://raw.githubusercontent.com/OctoPrint/OctoPrint/master/docs/images/octoprint-logo.png" alt="OctoPrint Logo" height="64"></th>
+    <th><img src="https://raw.githubusercontent.com/fluidd-core/fluidd/master/docs/docs/assets/images/logo.svg" alt="Fluidd Logo" height="64"></th>
+    <th><img src="https://avatars.githubusercontent.com/KlipperScreen?v=4" alt="KlipperScreen Logo" height="64"></th>
+    <th></th>
 </tr>
 <tr>
    <th>由 <a href="https://github.com/fluidd-core">fluidd-core</a></th>
-    <th>由 <a href="https://github.com/jordanruthe">jordanruthe</a></th>
-    <th>由 <a href="https://github.com/OctoPrint">OctoPrint</a></th>
+    <th>由 <a href="https://github.com/alfrix">alfrix</a></th>
+    <th></th>
 </tr>
+</table>

+<hr>
+
+<h2 align="center">🧩 社区扩展 🧩</h2>
+
+<table align="center" style="text-align: center;">
 <tr>
+    <th><h3><a href="https://github.com/OctoPrint/OctoPrint">OctoPrint</a></h3></th>
    <th><h3><a href="https://github.com/nlef/moonraker-telegram-bot">Moonraker-Telegram-Bot</a></h3></th>
    <th><h3><a href="https://github.com/Kragrathea/pgcode">PrettyGCode for Klipper</a></h3></th>
-    <th><h3><a href="https://github.com/TheSpaghettiDetective/moonraker-obico">Obico for Klipper</a></h3></th>
 </tr>
 <tr>
-    <th><img src="https://avatars.githubusercontent.com/u/52351624?v=4" alt="nlef avatar" height="64"></th>
-    <th><img src="https://avatars.githubusercontent.com/u/5917231?v=4" alt="Kragrathea avatar" height="64"></th>
-    <th><img src="https://avatars.githubusercontent.com/u/46323662?s=200&v=4" alt="Obico logo" height="64"></th>
+    <th><a href="https://github.com/OctoPrint/OctoPrint"><img src="https://raw.githubusercontent.com/OctoPrint/OctoPrint/master/docs/images/octoprint-logo.png" alt="OctoPrint Logo" height="64"></a></th>
+    <th><a href="https://github.com/nlef/moonraker-telegram-bot"><img src="https://avatars.githubusercontent.com/u/52351624?v=4" alt="nlef avatar" height="64"></a></th>
+    <th><a href="https://github.com/Kragrathea/pgcode"><img src="https://avatars.githubusercontent.com/u/5917231?v=4" alt="Kragrathea avatar" height="64"></a></th>
 </tr>
 <tr>
+    <th>由 <a href="https://github.com/OctoPrint">OctoPrint</a></th>
    <th>由 <a href="https://github.com/nlef">nlef</a></th>
    <th>由 <a href="https://github.com/Kragrathea">Kragrathea</a></th>
-    <th>由 <a href="https://github.com/TheSpaghettiDetective">Obico</a></th>
 </tr>
-
 <tr>
+    <th><h3><a href="https://github.com/TheSpaghettiDetective/moonraker-obico">Obico for Klipper</a></h3></th>
    <th><h3><a href="https://github.com/Clon1998/mobileraker_companion">Mobileraker's Companion</a></h3></th>
    <th><h3><a href="https://octoeverywhere.com/?source=kiauh_readme">OctoEverywhere For Klipper</a></h3></th>
-    <th><h3><a href="https://github.com/crysxd/OctoApp-Plugin">OctoApp For Klipper</a></h3></th>
 </tr>
 <tr>
+    <th><a href="https://github.com/TheSpaghettiDetective/moonraker-obico"><img src="https://avatars.githubusercontent.com/u/46323662?s=200&v=4" alt="Obico logo" height="64"></a></th>
    <th><a href="https://github.com/Clon1998/mobileraker_companion"><img src="https://raw.githubusercontent.com/Clon1998/mobileraker/master/assets/icon/mr_appicon.png" alt="Mobileraker Logo" height="64"></a></th>
    <th><a href="https://octoeverywhere.com/?source=kiauh_readme"><img src="https://octoeverywhere.com/img/logo.svg" alt="OctoEverywhere Logo" height="64"></a></th>
-    <th><a href="https://octoapp.eu/?source=kiauh_readme"><img src="https://octoapp.eu/octoapp.webp" alt="OctoApp Logo" height="64"></a></th>
 </tr>
 <tr>
+    <th>由 <a href="https://github.com/TheSpaghettiDetective">Obico</a></th>
    <th>由 <a href="https://github.com/Clon1998">Patrick Schmidt</a></th>
    <th>由 <a href="https://github.com/QuinnDamerell">Quinn Damerell</a></th>
-    <th>由 <a href="https://github.com/crysxd">Christian Würthner</a></th>
 </tr>
-
 <tr>
+    <th><h3><a href="https://github.com/crysxd/OctoApp-Plugin">OctoApp For Klipper</a></h3></th>
    <th><h3><a href="https://github.com/staubgeborener/klipper-backup">Klipper-Backup</a></h3></th>
    <th><h3><a href="https://simplyprint.io/">SimplyPrint for Klipper</a></h3></th>
 </tr>
 <tr>
+    <th><a href="https://octoapp.eu/?source=kiauh_readme"><img src="https://octoapp.eu/octoapp.webp" alt="OctoApp Logo" height="64"></a></th>
    <th><a href="https://github.com/staubgeborener/klipper-backup"><img src="https://avatars.githubusercontent.com/u/28908603?v=4" alt="Staubgeroner Avatar" height="64"></a></th>
-    <th><a href="https://github.com/SimplyPrint"><img src="https://avatars.githubusercontent.com/u/64896552?s=200&v=4" alt="" height="64"></a></th>
+    <th><a href="https://github.com/SimplyPrint"><img src="https://avatars.githubusercontent.com/u/64896552?s=200&v=4" alt="SimplyPrint Logo" height="64"></a></th>
 </tr>
 <tr>
+    <th>由 <a href="https://github.com/crysxd">Christian Würthner</a></th>
    <th>由 <a href="https://github.com/Staubgeborener">Staubgeborener</a></th>
    <th>由 <a href="https://github.com/SimplyPrint">SimplyPrint</a></th>
 </tr>
+<tr>
+    <th><h3><a href="https://github.com/CodeMasterCody3D/DroidKlipp">DroidKlipp</a></h3></th>
+    <th><h3><a href="https://github.com/PEEKYPAUL/Moongate">Moongate</a></h3></th>
+    <th></th>
+</tr>
+<tr>
+    <th><a href="https://github.com/CodeMasterCody3D/DroidKlipp"><img src="https://raw.githubusercontent.com/CodeMasterCody3D/DroidKlipp/main/logo.png" alt="DroidKlipp Logo" height="64"></a></th>
+    <th><a href="https://github.com/PEEKYPAUL/Moongate"><img src="https://raw.githubusercontent.com/PEEKYPAUL/Moongate/master/docs/moongate-icon.png" alt="Moongate Logo" height="64"></a></th>
+    <th></th>
+</tr>
+<tr>
+    <th>由 <a href="https://github.com/CodeMasterCody3D">CodeMasterCody3D</a></th>
+    <th>由 <a href="https://github.com/PEEKYPAUL">PEEKYPAUL</a></th>
+    <th></th>
+</tr>
 </table>

-## 🎖️ 贡献者
+<hr>
+
+<h2 align="center">🎖️ 贡献者 🎖️</h2>

 <div align="center">
  <a href="https://github.com/dw-0/kiauh/graphs/contributors">
@@ -192,15 +215,10 @@ cd ~ && git clone https://github.com/dw-0/kiauh.git
    <img src="https://repobeats.axiom.co/api/embed/a1afbda9190c04a90cf4bd3061e5573bc836cb05.svg" alt="Repobeats analytics image"/>
 </div>

-## ✨ 特别感谢
+<hr>
+
+<h2 align="center">✨ 特别感谢 ✨</h2>

 * 非常感谢 [lixxbox](https://github.com/lixxbox) 设计了如此出色的 KIAUH 标志！
 * 同时，非常感谢所有通过 [Ko-fi](https://ko-fi.com/dw__0) 支持我的工作的人！
 * 最后但同样重要的是：感谢所有为 Klipper 社区做出贡献的成员，以及喜欢和分享这个项目的朋友们！
-
-<h4 align="center">特别感谢 JetBrains 为本项目提供其出色的软件赞助！</h4>
-<p align="center">
-  <a href="https://www.jetbrains.com/community/opensource/#support" target="_blank">
-    <img src="https://resources.jetbrains.com/storage/products/company/brand/logos/jb_beam.png" alt="JetBrains Logo (Main) logo." height="128">
-  </a>
-</p>
@@ -0,0 +1,82 @@
+# Live System Testing
+
+Live tests run KIAUH workflows against a real Debian 12 QEMU/KVM VM. They are
+isolated from the local developer machine by design.
+
+## Safety Rules
+
+- Live tests NEVER run on the local machine.
+- They require `KIAUH_LIVE_ALLOW=1`.
+- The target host must be explicitly set via `KIAUH_LIVE_TARGET_HOST` and match
+the VM in the inventory.
+- Local hostnames, loopback addresses, and the current hostname are blocked.
+
+## Prepare a VM
+
+1. Create a Debian 12 QEMU/KVM VM.
+2. Create a user with passwordless sudo.
+3. Install an SSH key for that user.
+4. Install KIAUH on the VM (e.g. clone this repository).
+5. Create a clean snapshot named `clean`:
+   ```bash
+   virsh snapshot-create-as debian12-kiauh clean
+   ```
+
+## Inventory
+
+`kiauh/live/inventory.yaml` defines non-sensitive VM settings. The host and SSH
+key path are read from environment variables or a `.env` file so they are not
+committed.
+
+Create `.env` in the project root:
+
+```bash
+KIAUH_LIVE_DEBIAN12_KIAUH_HOST=192.168.122.10
+KIAUH_LIVE_DEBIAN12_KIAUH_KEY_FILE=/home/you/.ssh/kiauh_vm
+```
+
+Variable naming: `KIAUH_LIVE_<VM_NAME>_HOST` and `KIAUH_LIVE_<VM_NAME>_KEY_FILE`,
+with the VM name uppercased and hyphens replaced by underscores.
+
+You can also point to a custom inventory file:
+
+```bash
+export KIAUH_LIVE_INVENTORY=/path/to/inventory.yaml
+```
+
+## Run Live Tests
+
+```bash
+export KIAUH_LIVE_ALLOW=1
+export KIAUH_LIVE_TARGET_HOST=192.168.122.10
+pytest -m live
+```
+
+Each scenario reverts the VM to the clean snapshot first, so scenarios are
+independent.
+
+## Add a Scenario
+
+Create a YAML file in `kiauh/live/scenarios/`:
+
+```yaml
+name: Install Klipper on Debian 12
+vm: debian12-kiauh
+os: debian-12
+steps:
+  - command: ["kiauh", "install", "klipper", "--count", "1"]
+    timeout: 600
+expected:
+  - type: service
+    name: klipper.service
+    state: running
+```
+
+Supported assertion types: `service`, `file`, `package`, `port`, `command`.
+
+## Troubleshooting
+
+- `UnsafeTargetError`: check `KIAUH_LIVE_ALLOW` and `KIAUH_LIVE_TARGET_HOST`.
+- `InventoryError`: check the inventory YAML path and format.
+- `LiveRunnerError` during snapshot revert: ensure `virsh` works and the domain
+  and snapshot names match the inventory.
@@ -0,0 +1,74 @@
+## ⚠️ Working on this PRD
+
+Do NOT implement this PRD directly. It has been broken into sequential tasks.
+Work through the tasks below in order.
+
+## Task Index
+
+| # | Task | Todo | Blocked by | Status |
+|---|------|------|------------|--------|
+| 1/5 | VM inventory, SSH fixture, and safety guards | TODO-006 | — | 🔄 open |
+| 2/5 | Scenario loader and Klipper install scenario | TODO-007 | TODO-006 | ⏳ blocked |
+| 3/5 | Remove Klipper and Moonraker scenarios | TODO-008 | TODO-007 | ⏳ blocked |
+| 4/5 | Mainsail and Fluidd install scenarios | TODO-009 | TODO-008 | ⏳ blocked |
+| 5/5 | Backup, restore, and update scenarios | TODO-010 | TODO-009 | ⏳ blocked |
+
+Start with: **TODO-006** (PRD #2 - Task 1/5: VM inventory, SSH fixture, and safety guards)
+
+---
+
+# PRD #2: Isolated live-system acceptance test strategy on Debian 12 VM
+
+**Tags:** `prd`, `prd-2`
+
+## Problem Statement
+
+- Pytest unit tests cannot validate real package installs, systemd services, git clones, and OS-specific behavior.
+- Running workflow tests on a local developer machine risks destroying the environment.
+- Need reproducible, isolated acceptance tests with explicit expected outcomes.
+
+## Solution
+
+- Acceptance tests run only on a pre-built Debian 12 QEMU/KVM VM.
+- Test harness connects via SSH; never executes on the local host.
+- YAML scenarios define workflows and expected outcomes.
+- VM snapshot reverted before every scenario.
+- Multi-layer safety prevents local execution.
+
+## User Stories
+
+1. As a maintainer, I want install/remove Klipper workflow tested on a real VM, so I know the installer still works.
+2. As a maintainer, I want install/remove Moonraker workflow tested, so API stack compatibility is verified.
+3. As a maintainer, I want Mainsail/Fluidd install workflow tested, so web client setup works end-to-end.
+4. As a maintainer, I want backup/restore workflow tested, so user data survives the cycle.
+5. As a maintainer, I want tests parameterized by VM inventory, so future Ubuntu/Debian versions can be added without code changes.
+6. As a maintainer, I want local execution blocked by multiple guards, so the developer machine is never modified.
+7. As a CI operator, I want scenario results to show expected vs actual outcome, so failures are actionable.
+
+## Implementation Decisions
+
+- VM inventory config supplies host/IP, SSH user/key, OS family. No auto-provisioning; base images are prepared in advance.
+- Test harness: pytest + SSH fixture + Testinfra assertions. Commands are routed through SSH; assertions use Testinfra modules for service/file/package/port state.
+- Scenario schema YAML: `name`, `os`, `steps` (commands/options), `expected` (assertions for service running, file exists, package installed, port reachable, process present).
+- Snapshot reset: revert VM overlay before every scenario. Scenarios must be independent.
+- Safety guards: require `KIAUH_LIVE_TARGET_HOST`; abort if value is `localhost`, `127.*`, or matches current hostname; abort if target resolves to a local interface; verify SSH host key differs from local; optional explicit confirmation prompt.
+- Workflow priority: (1) install/remove Klipper; (2) install/remove Moonraker; (3) install Mainsail/Fluidd; (4) backup/restore; (5) update flows.
+- Test user on VM has passwordless sudo; VM has internet access; long installs use timeouts.
+- Scenario runner exposes expected outcome per step; failure shows command, expected assertion, and actual result.
+
+## Testing Decisions
+
+- Acceptance tests verify observable system state, not internal functions.
+- Each scenario defines exact pre-state (clean snapshot) and post-state assertions.
+- Flaky network commands are retried with timeout; failures attach relevant VM logs.
+- Live suite is marked with a `live` pytest marker and excluded from the default `pytest` run.
+
+## Out of Scope
+
+- Running live tests on the local machine or bare metal.
+- Auto-provisioning or building VM images.
+- Testing every extension in the first iteration; only core workflows.
+
+## Further Notes
+
+- Future OS matrix (Ubuntu 22.04/24.04) is enabled by adding inventory entries and matching base images; no harness changes needed.
@@ -0,0 +1,31 @@
+# PRD #2 - Task 1/5: VM inventory, SSH fixture, and safety guards
+
+**Tags:** `task`, `prd-2`
+
+## Parent PRD
+
+PRD #2: Isolated live-system acceptance test strategy on Debian 12 VM (`docs/prd/PRD-002-live-vm-test-strategy.md`)
+
+## What to build
+
+Create the VM inventory config schema (host/IP, SSH user/key, OS family). Implement the SSH connection fixture and the multi-layer safety guards that abort if the target could be the local machine. Write tests for the guards without executing any workflow.
+
+## Acceptance criteria
+
+- [ ] Inventory config schema documented and validated.
+- [ ] SSH fixture connects only when target is explicitly allowed.
+- [ ] Guards block `localhost`, `127.*`, current hostname, local interfaces, and unknown SSH host keys.
+- [ ] Guard tests run on the local machine and prove the blocks work.
+
+## Blocked by
+
+None — can start immediately.
+
+## Next task
+
+- TODO-007 (PRD #2 - Task 2/5: Scenario loader and Klipper install scenario)
+
+## User stories addressed
+
+- User story 5
+- User story 6
@@ -0,0 +1,32 @@
+# PRD #2 - Task 2/5: Scenario loader and Klipper install scenario
+
+**Tags:** `task`, `prd-2`
+
+## Parent PRD
+
+PRD #2: Isolated live-system acceptance test strategy on Debian 12 VM (`docs/prd/PRD-002-live-vm-test-strategy.md`)
+
+## What to build
+
+Implement the YAML scenario loader and the `live` pytest marker. Write the first end-to-end scenario: install Klipper on the Debian 12 VM, define expected outcomes (service file, env file, folders), and run it with snapshot revert before the scenario.
+
+## Acceptance criteria
+
+- [ ] YAML scenario loader parses `name`, `os`, `steps`, and `expected` assertions.
+- [ ] `pytest -m live` runs only live scenarios; default run skips them.
+- [ ] Klipper install scenario runs on the VM and passes.
+- [ ] Snapshot revert happens before the scenario.
+- [ ] Expected outcomes include file, service, and folder assertions.
+
+## Blocked by
+
+- TODO-006 (PRD #2 - Task 1/5: VM inventory, SSH fixture, and safety guards)
+
+## Next task
+
+- TODO-008 (PRD #2 - Task 3/5: Remove Klipper and Moonraker scenarios)
+
+## User stories addressed
+
+- User story 1
+- User story 7
@@ -0,0 +1,30 @@
+# PRD #2 - Task 3/5: Remove Klipper and Moonraker scenarios
+
+**Tags:** `task`, `prd-2`
+
+## Parent PRD
+
+PRD #2: Isolated live-system acceptance test strategy on Debian 12 VM (`docs/prd/PRD-002-live-vm-test-strategy.md`)
+
+## What to build
+
+Add remove-Klipper and install/remove-Moonraker scenarios. Each scenario starts from a clean snapshot. Capture relevant VM logs when a scenario fails to make debugging actionable.
+
+## Acceptance criteria
+
+- [ ] Remove Klipper scenario runs and verifies service/files are gone.
+- [ ] Install Moonraker scenario runs and verifies service/config/log files.
+- [ ] Remove Moonraker scenario runs and verifies cleanup.
+- [ ] Failure output includes tail of installer/service logs.
+
+## Blocked by
+
+- TODO-007 (PRD #2 - Task 2/5: Scenario loader and Klipper install scenario)
+
+## Next task
+
+- TODO-009 (PRD #2 - Task 4/5: Mainsail and Fluidd install scenarios)
+
+## User stories addressed
+
+- User story 2
@@ -0,0 +1,30 @@
+# PRD #2 - Task 4/5: Mainsail and Fluidd install scenarios
+
+**Tags:** `task`, `prd-2`
+
+## Parent PRD
+
+PRD #2: Isolated live-system acceptance test strategy on Debian 12 VM (`docs/prd/PRD-002-live-vm-test-strategy.md`)
+
+## What to build
+
+Add install scenarios for Mainsail and Fluidd web clients. Assert that the static files are deployed and the reverse-proxy/service config is in place. Harden the snapshot-revert fixture so it runs reliably before every scenario.
+
+## Acceptance criteria
+
+- [ ] Mainsail install scenario passes on the VM.
+- [ ] Fluidd install scenario passes on the VM.
+- [ ] Expected outcomes check webroot directory and reverse-proxy config.
+- [ ] Snapshot revert fixture is robust (wait for SSH, error on revert failure).
+
+## Blocked by
+
+- TODO-008 (PRD #2 - Task 3/5: Remove Klipper and Moonraker scenarios)
+
+## Next task
+
+- TODO-010 (PRD #2 - Task 5/5: Backup, restore, and update scenarios)
+
+## User stories addressed
+
+- User story 3
@@ -0,0 +1,32 @@
+# PRD #2 - Task 5/5: Backup, restore, and update scenarios
+
+**Tags:** `task`, `prd-2`
+
+## Parent PRD
+
+PRD #2: Isolated live-system acceptance test strategy on Debian 12 VM (`docs/prd/PRD-002-live-vm-test-strategy.md`)
+
+## What to build
+
+Add backup/restore and update scenarios. Document the live test runbook: how to prepare the VM, set inventory, run scenarios, and read results. Ensure the whole live suite can be executed in one command.
+
+## Acceptance criteria
+
+- [ ] Backup scenario creates an archive with expected content.
+- [ ] Restore scenario returns config files to expected state.
+- [ ] Update scenario changes a component version/config observable on the VM.
+- [ ] Runbook `docs/live-testing.md` covers VM setup, inventory, execution, and troubleshooting.
+- [ ] Full `pytest -m live` run completes end-to-end.
+
+## Blocked by
+
+- TODO-009 (PRD #2 - Task 4/5: Mainsail and Fluidd install scenarios)
+
+## Next task
+
+None — this is the last task.
+
+## User stories addressed
+
+- User story 4
+- User story 7
@@ -15,18 +15,30 @@ clear -x
 # make sure we have the correct permissions while running the script
 umask 022

+# gets the path where this script is located
+KIAUH_SRCDIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd)
+
+# colors
+white="\033[37m"
+cyan="\033[96m"
+red="\033[91m"
+yellow="\033[93m"
+green="\033[92m"
+
 #===================================================#
 #=================== UPDATE KIAUH ==================#
 #===================================================#

 function update_kiauh() {
-  status_msg "Updating KIAUH ..."
+  echo "Updating KIAUH ..."

  cd "${KIAUH_SRCDIR}"
  git reset --hard && git pull

-  ok_msg "Update complete! Please restart KIAUH."
-  exit 0
+  echo "Update complete! Restarting..."
+  sleep 1
+  exec "$0" "$@" # restarts the script
+
 }

 #===================================================#
@@ -65,16 +77,18 @@ function kiauh_update_dialog() {
  echo -e "\-------------------------------------------------------/"

  local yn
-  read -p "${cyan}###### Do you want to update now? (Y/n):${white} " yn
+  echo -ne "${cyan}###### Do you want to update now? (Y/n):${white} "
+  read yn
  while true; do
    case "${yn}" in
     Y|y|Yes|yes|"")
-       do_action "update_kiauh"
+       update_kiauh
       break;;
     N|n|No|no)
       break;;
     *)
-       deny_action "kiauh_update_dialog";;
+       echo -e "${red}Invalid input. Please try again.${white}"
+       kiauh_update_dialog;;
    esac
  done
 }
@@ -19,10 +19,12 @@ CROWSNEST_SERVICE_NAME = "crowsnest.service"

 # directories
 CROWSNEST_DIR = Path.home().joinpath("crowsnest")
+CROWSNEST_ENV_DIR = Path.home().joinpath("crowsnest-env")

 # files
 CROWSNEST_MULTI_CONFIG = CROWSNEST_DIR.joinpath("tools/.config")
 CROWSNEST_INSTALL_SCRIPT = CROWSNEST_DIR.joinpath("tools/install.sh")
+CROWSNEST_DEPS_JSON_FILE = CROWSNEST_DIR.joinpath("system-dependencies.json")
 CROWSNEST_BIN_FILE = Path("/usr/local/bin/crowsnest")
 CROWSNEST_LOGROTATE_FILE = Path("/etc/logrotate.d/crowsnest")
 CROWSNEST_SERVICE_FILE = SYSTEMD.joinpath(CROWSNEST_SERVICE_NAME)
@@ -16,7 +16,9 @@ from typing import List

 from components.crowsnest import (
    CROWSNEST_BIN_FILE,
+    CROWSNEST_DEPS_JSON_FILE,
    CROWSNEST_DIR,
+    CROWSNEST_ENV_DIR,
    CROWSNEST_INSTALL_SCRIPT,
    CROWSNEST_LOGROTATE_FILE,
    CROWSNEST_MULTI_CONFIG,
@@ -25,6 +27,8 @@ from components.crowsnest import (
    CROWSNEST_SERVICE_NAME,
 )
 from components.klipper.klipper import Klipper
+from components.moonraker.utils.sysdeps_parser import SysDepsParser
+from components.moonraker.utils.utils import load_sysdeps_json
 from core.logger import DialogType, Logger
 from core.services.backup_service import BackupService
 from core.settings.kiauh_settings import KiauhSettings
@@ -34,6 +38,7 @@ from utils.common import (
    get_install_status,
 )
 from utils.git_utils import (
+    get_current_branch,
    git_clone_wrapper,
    git_pull_wrapper,
 )
@@ -47,7 +52,7 @@ from utils.sys_utils import (

 def install_crowsnest() -> None:
    # Step 1: Clone crowsnest repo
-    git_clone_wrapper(CROWSNEST_REPO, CROWSNEST_DIR, "master")
+    git_clone_wrapper(CROWSNEST_REPO, CROWSNEST_DIR)

    # Step 2: Install dependencies
    check_install_dependencies({"make"})
@@ -135,8 +140,7 @@ def update_crowsnest() -> None:

            git_pull_wrapper(CROWSNEST_DIR)

-            deps = parse_packages_from_file(CROWSNEST_INSTALL_SCRIPT)
-            check_install_dependencies({*deps})
+            install_crowsnest_packages()

        cmd_sysctl_service(CROWSNEST_SERVICE_NAME, "restart")

@@ -147,12 +151,68 @@ def update_crowsnest() -> None:


 def get_crowsnest_status() -> ComponentStatus:
-    files = [
-        CROWSNEST_BIN_FILE,
-        CROWSNEST_LOGROTATE_FILE,
-        CROWSNEST_SERVICE_FILE,
-    ]
-    return get_install_status(CROWSNEST_DIR, files=files)
+    """
+    Get the current install status of Crowsnest. Depending on the version the installed
+    files are different. If a version is not yet specified, it will search for a
+    non_existant file resulting in 'Incomplete' status.
+    :return: Installation status
+    """
+    files_dict = {
+        4: [
+            CROWSNEST_BIN_FILE,
+            CROWSNEST_LOGROTATE_FILE,
+            CROWSNEST_SERVICE_FILE,
+        ],
+        5: [CROWSNEST_SERVICE_FILE],
+    }
+    version = get_crowsnest_version()
+
+    non_existant = CROWSNEST_DIR.joinpath("non_existant")
+    files = files_dict.get(version, [non_existant])
+
+    env_dir = None
+    if version >= 5:
+        env_dir = CROWSNEST_ENV_DIR
+    return get_install_status(CROWSNEST_DIR, files=files, env_dir=env_dir)
+
+
+def get_crowsnest_version() -> int:
+    """
+    Get the current major version. Starting with v5 the default branch will be named
+    after the major version.
+    :return: Current major version
+    """
+    version = get_current_branch(CROWSNEST_DIR)
+    if version is None:
+        return 0
+    if version == "master":
+        return 4
+    return int(version.removeprefix("v"))
+
+
+def install_crowsnest_packages() -> None:
+    Logger.print_status("Parsing Crowsnest system dependencies  ...")
+
+    crowsnest_deps = []
+    crowsnest_version = get_crowsnest_version()
+    if crowsnest_version >= 5 and CROWSNEST_DEPS_JSON_FILE.exists():
+        Logger.print_info(
+            f"Parsing system dependencies from {CROWSNEST_DEPS_JSON_FILE.name} ..."
+        )
+        parser = SysDepsParser()
+        sysdeps = load_sysdeps_json(CROWSNEST_DEPS_JSON_FILE)
+        crowsnest_deps.extend(parser.parse_dependencies(sysdeps))
+
+    elif crowsnest_version <= 4 and CROWSNEST_INSTALL_SCRIPT.exists():
+        Logger.print_info(
+            f"Parsing system dependencies from {CROWSNEST_INSTALL_SCRIPT.name} ..."
+        )
+        crowsnest_deps = parse_packages_from_file(CROWSNEST_INSTALL_SCRIPT)
+
+    if not crowsnest_deps:
+        raise ValueError("Error parsing crowsnest dependencies!")
+
+    check_install_dependencies({*crowsnest_deps})


 def remove_crowsnest() -> None:
@@ -34,7 +34,7 @@ from core.constants import CURRENT_USER
 from core.instance_manager.base_instance import SUFFIX_BLACKLIST
 from core.logger import DialogType, Logger
 from core.services.backup_service import BackupService
-from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
 from core.types.component_status import ComponentStatus
@@ -113,7 +113,7 @@ def check_user_groups() -> None:

    if not get_confirm(f"Add user '{CURRENT_USER}' to group(s) now?"):
        log = "Skipped adding user to required groups. You might encounter issues."
-        Logger.warn(log)
+        Logger.print_warn(log)
        return

    try:
@@ -25,7 +25,7 @@ from components.moonraker import (
 from core.constants import CURRENT_USER
 from core.instance_manager.base_instance import BaseInstance
 from core.logger import Logger
-from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
 from utils.fs_utils import create_folders
@@ -25,7 +25,7 @@ from components.moonraker.utils.sysdeps_parser import SysDepsParser
 from components.webui_client.base_data import BaseWebClient
 from core.logger import Logger
 from core.services.backup_service import BackupService
-from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
 from core.types.component_status import ComponentStatus
@@ -33,7 +33,7 @@ from core.constants import (
 from core.logger import Logger
 from core.services.backup_service import BackupService
 from core.settings.kiauh_settings import KiauhSettings, WebUiSettings
-from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
 from core.types.color import Color
@@ -251,6 +251,9 @@ class UpdateMenu(BaseMenu):
        self._set_status_data("klipperscreen", get_klipperscreen_status)
        self._set_status_data("crowsnest", get_crowsnest_status)

+        self._fetch_system_package_update_status()
+
+    def _fetch_system_package_update_status(self) -> None:
        update_system_package_lists(silent=True)
        self.packages = get_upgradable_packages()
        self.package_count = len(self.packages)
@@ -340,15 +343,20 @@ class UpdateMenu(BaseMenu):

        try:
            pkgs: str = ", ".join(self.packages)
+
            Logger.print_dialog(
                DialogType.CUSTOM,
                ["The following packages will be upgraded:", "\n\n", pkgs],
                custom_title="UPGRADABLE SYSTEM UPDATES",
            )
-            if not get_confirm("Continue?"):
+
+            if not get_confirm("Upgrade packages?"):
                return
+
            Logger.print_status("Upgrading system packages ...")
+
            upgrade_system_packages(self.packages)
+            self._fetch_system_package_update_status()
        except Exception as e:
            Logger.print_error(f"Error upgrading system packages:\n{e}")
            raise
@@ -16,7 +16,7 @@ from components.klipper import KLIPPER_REPO_URL
 from components.moonraker import MOONRAKER_REPO_URL
 from core.logger import DialogType, Logger
 from core.services.backup_service import BackupService
-from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
 from utils.input_utils import get_confirm
@@ -10,8 +10,8 @@ from pathlib import Path

 import pytest

-from src.simple_config_parser.simple_config_parser import SimpleConfigParser
-from tests.utils import load_testdata_from_file
+from core.simple_config_parser.simple_config_parser import SimpleConfigParser
+from core.simple_config_parser.tests.utils import load_testdata_from_file

 BASE_DIR = Path(__file__).parent.joinpath("test_data")
 MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
@@ -10,8 +10,8 @@ from pathlib import Path

 import pytest

-from src.simple_config_parser.simple_config_parser import SimpleConfigParser
-from tests.utils import load_testdata_from_file
+from core.simple_config_parser.simple_config_parser import SimpleConfigParser
+from core.simple_config_parser.tests.utils import load_testdata_from_file

 BASE_DIR = Path(__file__).parent.joinpath("test_data")
 MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
@@ -10,8 +10,8 @@ from pathlib import Path

 import pytest

-from src.simple_config_parser.simple_config_parser import SimpleConfigParser
-from tests.utils import load_testdata_from_file
+from core.simple_config_parser.simple_config_parser import SimpleConfigParser
+from core.simple_config_parser.tests.utils import load_testdata_from_file

 BASE_DIR = Path(__file__).parent.joinpath("test_data")
 MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
@@ -10,8 +10,8 @@ from pathlib import Path

 import pytest

-from src.simple_config_parser.simple_config_parser import SimpleConfigParser
-from tests.utils import load_testdata_from_file
+from core.simple_config_parser.simple_config_parser import SimpleConfigParser
+from core.simple_config_parser.tests.utils import load_testdata_from_file

 BASE_DIR = Path(__file__).parent.joinpath("test_data")
 MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
@@ -10,8 +10,8 @@ from pathlib import Path

 import pytest

-from src.simple_config_parser.simple_config_parser import SimpleConfigParser
-from tests.utils import load_testdata_from_file
+from core.simple_config_parser.simple_config_parser import SimpleConfigParser
+from core.simple_config_parser.tests.utils import load_testdata_from_file

 BASE_DIR = Path(__file__).parent.joinpath("test_data")
 MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
@@ -10,8 +10,8 @@ from pathlib import Path

 import pytest

-from src.simple_config_parser.simple_config_parser import SimpleConfigParser
-from tests.utils import load_testdata_from_file
+from core.simple_config_parser.simple_config_parser import SimpleConfigParser
+from core.simple_config_parser.tests.utils import load_testdata_from_file

 BASE_DIR = Path(__file__).parent.joinpath("test_data")
 MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
@@ -10,8 +10,8 @@ from pathlib import Path

 import pytest

-from src.simple_config_parser.simple_config_parser import SimpleConfigParser
-from tests.utils import load_testdata_from_file
+from core.simple_config_parser.simple_config_parser import SimpleConfigParser
+from core.simple_config_parser.tests.utils import load_testdata_from_file

 BASE_DIR = Path(__file__).parent.joinpath("test_data")
 MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
@@ -10,8 +10,8 @@ from pathlib import Path

 import pytest

-from src.simple_config_parser.simple_config_parser import SimpleConfigParser
-from tests.utils import load_testdata_from_file
+from core.simple_config_parser.simple_config_parser import SimpleConfigParser
+from core.simple_config_parser.tests.utils import load_testdata_from_file

 BASE_DIR = Path(__file__).parent.joinpath("test_data")
 MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
@@ -10,7 +10,7 @@ from typing import List

 import pytest

-from src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    BlankLine,
    CommentLine,
    MLOptionValue,
@@ -3,7 +3,7 @@
 # ======================================================================= #
 from pathlib import Path

-from src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    BlankLine,
    MultiLineOption,
    SimpleConfigParser,
@@ -9,7 +9,7 @@ from pathlib import Path

 import pytest

-from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from core.simple_config_parser.simple_config_parser import SimpleConfigParser

 BASE_DIR = Path(__file__).parent.parent.joinpath("assets")
 CONFIG_FILES = [
@@ -1,6 +1,6 @@
 from pathlib import Path

-from src.simple_config_parser.simple_config_parser import Gcode, SimpleConfigParser
+from core.simple_config_parser.simple_config_parser import Gcode, SimpleConfigParser

 ASSETS = Path(__file__).parent.parent / "assets"
 GCODE_FILE = ASSETS / "test_gcode.cfg"
@@ -8,7 +8,7 @@

 import pytest

-from src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    MultiLineOption,
    NoOptionError,
    NoSectionError,
@@ -7,7 +7,7 @@
 # ======================================================================= #
 from pathlib import Path

-from src.simple_config_parser.simple_config_parser import Section, SimpleConfigParser
+from core.simple_config_parser.simple_config_parser import Section, SimpleConfigParser

 BASE_DIR = Path(__file__).parent.parent / "assets"
 TEST_DATA_PATH = BASE_DIR / "test_config_1.cfg"
@@ -8,7 +8,7 @@

 import pytest

-from src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    DuplicateSectionError,
 )

@@ -9,7 +9,7 @@ from pathlib import Path

 import pytest

-from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from core.simple_config_parser.simple_config_parser import SimpleConfigParser

 BASE_DIR = Path(__file__).parent.parent / "assets"
 TEST_DATA_PATH = BASE_DIR / "test_config_1.cfg"
@@ -9,7 +9,7 @@ from pathlib import Path

 import pytest

-from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from core.simple_config_parser.simple_config_parser import SimpleConfigParser

 BASE_DIR = Path(__file__).parent.parent / "assets"
 TEST_DATA_PATH = BASE_DIR / "test_config_1.cfg"
@@ -1,13 +0,0 @@
-# see https://editorconfig.org/
-root = true
-
-[*]
-end_of_line = lf
-trim_trailing_whitespace = true
-indent_style = space
-insert_final_newline = true
-indent_size = 4
-charset = utf-8
-
-[*.py]
-max_line_length = 88
@@ -1,13 +0,0 @@
-*.py[cod]
-*.pyc
-__pycache__
-.pytest_cache/
-
-.idea/
-.vscode/
-
-.venv*/
-venv*/
-
-.coverage
-htmlcov/
@@ -1,674 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
-  The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works.  By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.  We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors.  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
-  To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights.  Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received.  You must make sure that they, too, receive
-or can get the source code.  And you must show them these terms so they
-know their rights.
-
-  Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
-  For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software.  For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
-  Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so.  This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software.  The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable.  Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products.  If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
-  Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary.  To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                       TERMS AND CONDITIONS
-
-  0. Definitions.
-
-  "This License" refers to version 3 of the GNU General Public License.
-
-  "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
-  "The Program" refers to any copyrightable work licensed under this
-License.  Each licensee is addressed as "you".  "Licensees" and
-"recipients" may be individuals or organizations.
-
-  To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy.  The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
-  A "covered work" means either the unmodified Program or a work based
-on the Program.
-
-  To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy.  Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
-  To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies.  Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
-  An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License.  If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
-  1. Source Code.
-
-  The "source code" for a work means the preferred form of the work
-for making modifications to it.  "Object code" means any non-source
-form of a work.
-
-  A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
-  The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form.  A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
-  The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities.  However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work.  For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
-  The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
-  The Corresponding Source for a work in source code form is that
-same work.
-
-  2. Basic Permissions.
-
-  All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met.  This License explicitly affirms your unlimited
-permission to run the unmodified Program.  The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work.  This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
-  You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force.  You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright.  Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
-  Conveying under any other circumstances is permitted solely under
-the conditions stated below.  Sublicensing is not allowed; section 10
-makes it unnecessary.
-
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-  No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
-  When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
-  4. Conveying Verbatim Copies.
-
-  You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
-  You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all.  For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
-  13. Use with the GNU Affero General Public License.
-
-  Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work.  The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
-  14. Revised Versions of this License.
-
-  The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-  Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation.  If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
-  If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
-  Later license versions may give you additional or different
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
-  15. Disclaimer of Warranty.
-
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
-  If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
-    <program>  Copyright (C) <year>  <name of author>
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<https://www.gnu.org/licenses/>.
-
-  The GNU General Public License does not permit incorporating your program
-into proprietary programs.  If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.  But first, please read
-<https://www.gnu.org/licenses/why-not-lgpl.html>.
@@ -1,66 +0,0 @@
-[project]
-name = "simple-config-parser"
-version = "0.0.1"
-description = "A simple config parser for Python"
-authors = [
-    {name = "Dominik Willner", email = "th33xitus@gmail.com"},
-]
-readme = "README.md"
-license = {text = "GPL-3.0-only"}
-requires-python = ">=3.8"
-
-[project.urls]
-homepage = "https://github.com/dw-0/simple-config-parser"
-repository = "https://github.com/dw-0/simple-config-parser"
-documentation = "https://github.com/dw-0/simple-config-parser"
-
-[project.optional-dependencies]
-dev=["ruff"]
-
-[tool.ruff]
-required-version = ">=0.3.4"
-respect-gitignore = true
-exclude = [".git",".github", "./docs"]
-line-length = 88
-indent-width = 4
-output-format = "full"
-
-[tool.ruff.format]
-indent-style = "space"
-line-ending = "lf"
-quote-style = "double"
-
-[tool.ruff.lint]
-extend-select = ["I"]
-
-[tool.pytest.ini_options]
-minversion = "8.2.1"
-testpaths = ["tests/**/*.py"]
-addopts = "-svvv --cov --cov-config=pyproject.toml --cov-report=html"
-
-[tool.coverage.run]
-branch = true
-source = ["src.simple_config_parser"]
-
-[tool.coverage.report]
-# Regexes for lines to exclude from consideration
-exclude_also = [
-    # Don't complain about missing debug-only code:
-    "def __repr__",
-    "if self\\.debug",
-
-    # Don't complain if tests don't hit defensive assertion code:
-    "raise AssertionError",
-    "raise NotImplementedError",
-
-    # Don't complain if non-runnable code isn't run:
-    "if 0:",
-    "if __name__ == .__main__.:",
-
-    # Don't complain about abstract methods, they aren't run:
-    "@(abc\\.)?abstractmethod",
-    ]
-
-[tool.coverage.html]
-title = "SimpleConfigParser Coverage Report"
-directory = "htmlcov"
@@ -1,3 +0,0 @@
-ruff >= 0.3.4
-pytest >= 8.2.1
-pytest-cov >= 5.0.0
@@ -10,3 +10,4 @@
 from pathlib import Path

 EXTENSION_ROOT = Path(__file__).resolve().parents[1].joinpath("extensions")
+GITHUB_ISSUES_URL = "https://github.com/dw-0/kiauh/issues"
@@ -0,0 +1,28 @@
+# ======================================================================= #
+#  Copyright (C) 2026 Cody Dixon                                         #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from pathlib import Path
+
+# repo
+DROIDKLIPP_REPO = "https://github.com/CodeMasterCody3D/DroidKlipp"
+DROIDKLIPP_APK_URL = "https://github.com/CodeMasterCody3D/DroidKlipp-Android-APK/releases/latest/download/DroidKlipp.apk"
+
+# directories
+DROIDKLIPP_DIR = Path.home().joinpath("DroidKlipp")
+
+# files
+DROIDKLIPP_INSTALL_SCRIPT = DROIDKLIPP_DIR.joinpath("install_droidklipp.sh")
+DROIDKLIPP_UNINSTALL_SCRIPT = DROIDKLIPP_DIR.joinpath("uninstall_droidklipp.sh")
+DROIDKLIPP_MONITOR_FILE = DROIDKLIPP_DIR.joinpath("droidklipp_monitor.py")
+DROIDKLIPP_DEPLOYED_MONITOR = Path.home().joinpath("droidklipp_monitor.py")
+
+# service
+DROIDKLIPP_SERVICE_NAME = "adb_monitor"
+
+# packages
+DROIDKLIPP_REQUIRED_PACKAGES = {"adb", "tmux", "x11-utils"}
@@ -0,0 +1,155 @@
+# ======================================================================= #
+#  Copyright (C) 2026 Cody Dixon                                         #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from subprocess import CalledProcessError, run
+
+from components.klipperscreen import KLIPPERSCREEN_DIR, KLIPPERSCREEN_ENV_DIR
+from core.logger import DialogType, Logger
+from extensions.base_extension import BaseExtension
+from extensions.droidklipp import (
+    DROIDKLIPP_APK_URL,
+    DROIDKLIPP_DEPLOYED_MONITOR,
+    DROIDKLIPP_DIR,
+    DROIDKLIPP_INSTALL_SCRIPT,
+    DROIDKLIPP_MONITOR_FILE,
+    DROIDKLIPP_REPO,
+    DROIDKLIPP_REQUIRED_PACKAGES,
+    DROIDKLIPP_SERVICE_NAME,
+    DROIDKLIPP_UNINSTALL_SCRIPT,
+)
+from utils.common import check_install_dependencies
+from utils.fs_utils import check_file_exist, run_remove_routines
+from utils.git_utils import git_clone_wrapper, git_pull_wrapper
+from utils.input_utils import get_confirm
+from utils.sys_utils import cmd_sysctl_service
+
+
+# noinspection PyMethodMayBeStatic
+class DroidKlippExtension(BaseExtension):
+    def install_extension(self, **kwargs) -> None:
+        Logger.print_status("Installing DroidKlipp ...")
+
+        if not self._klipperscreen_exists():
+            Logger.print_dialog(
+                DialogType.WARNING,
+                [
+                    "No KIAUH v6 KlipperScreen installation found!",
+                    "DroidKlipp expects KlipperScreen at:",
+                    f"● {KLIPPERSCREEN_DIR.joinpath('screen.py')}",
+                    f"● {KLIPPERSCREEN_ENV_DIR.joinpath('bin/python')}",
+                    "Install KlipperScreen first, then run this installer again.",
+                ],
+            )
+            return
+
+        Logger.print_dialog(
+            DialogType.INFO,
+            [
+                "DroidKlipp requires the Android APK to be installed on your Android device:",
+                DROIDKLIPP_APK_URL,
+                "\n\n",
+                "The installer will configure ADB forwarding, udev rules, the DroidKlipp monitor, and WiFi fallback.",
+            ],
+        )
+
+        if not get_confirm(
+            "Continue DroidKlipp installation?",
+            default_choice=True,
+            allow_go_back=True,
+        ):
+            Logger.print_info("Exiting DroidKlipp installation ...")
+            return
+
+        try:
+            check_install_dependencies(DROIDKLIPP_REQUIRED_PACKAGES)
+            git_clone_wrapper(DROIDKLIPP_REPO, DROIDKLIPP_DIR)
+            run(["chmod", "+x", DROIDKLIPP_INSTALL_SCRIPT], check=True)
+            run([DROIDKLIPP_INSTALL_SCRIPT], check=True)
+            Logger.print_dialog(
+                DialogType.SUCCESS,
+                ["DroidKlipp successfully installed!"],
+                center_content=True,
+            )
+        except CalledProcessError as e:
+            Logger.print_error(f"Error during DroidKlipp installation:\n{e}")
+        except Exception as e:
+            Logger.print_error(f"Error during DroidKlipp installation:\n{e}")
+
+    def update_extension(self, **kwargs) -> None:
+        Logger.print_status("Updating DroidKlipp ...")
+
+        if not check_file_exist(DROIDKLIPP_DIR):
+            Logger.print_info("Extension does not seem to be installed! Skipping ...")
+            return
+
+        try:
+            cmd_sysctl_service(DROIDKLIPP_SERVICE_NAME, "stop")
+
+            git_pull_wrapper(DROIDKLIPP_DIR)
+
+            if check_file_exist(DROIDKLIPP_MONITOR_FILE):
+                run(
+                    [
+                        "install",
+                        "-m",
+                        "755",
+                        str(DROIDKLIPP_MONITOR_FILE),
+                        str(DROIDKLIPP_DEPLOYED_MONITOR),
+                    ],
+                    check=True,
+                )
+
+            cmd_sysctl_service(DROIDKLIPP_SERVICE_NAME, "start")
+
+            Logger.print_dialog(
+                DialogType.SUCCESS,
+                ["DroidKlipp successfully updated!"],
+                center_content=True,
+            )
+        except CalledProcessError as e:
+            Logger.print_error(f"Error during DroidKlipp update:\n{e}")
+            cmd_sysctl_service(DROIDKLIPP_SERVICE_NAME, "start")
+        except Exception as e:
+            Logger.print_error(f"Error during DroidKlipp update:\n{e}")
+            cmd_sysctl_service(DROIDKLIPP_SERVICE_NAME, "start")
+
+    def remove_extension(self, **kwargs) -> None:
+        Logger.print_status("Removing DroidKlipp ...")
+
+        if not check_file_exist(DROIDKLIPP_DIR):
+            Logger.print_info("Extension does not seem to be installed! Skipping ...")
+            return
+
+        if not get_confirm(
+            "Do you really want to uninstall DroidKlipp?",
+            default_choice=True,
+            allow_go_back=True,
+        ):
+            Logger.print_info("Exiting DroidKlipp uninstallation ...")
+            return
+
+        try:
+            if check_file_exist(DROIDKLIPP_UNINSTALL_SCRIPT):
+                run(["chmod", "+x", DROIDKLIPP_UNINSTALL_SCRIPT], check=True)
+                run([DROIDKLIPP_UNINSTALL_SCRIPT], check=True)
+            run_remove_routines(DROIDKLIPP_DIR)
+            Logger.print_dialog(
+                DialogType.SUCCESS,
+                ["DroidKlipp successfully removed!"],
+                center_content=True,
+            )
+        except CalledProcessError as e:
+            Logger.print_error(f"Error during DroidKlipp removal:\n{e}")
+        except Exception as e:
+            Logger.print_error(f"Error during DroidKlipp removal:\n{e}")
+
+    def _klipperscreen_exists(self) -> bool:
+        return bool(
+            check_file_exist(KLIPPERSCREEN_DIR.joinpath("screen.py"))
+            and check_file_exist(KLIPPERSCREEN_ENV_DIR.joinpath("bin/python"))
+        )
@@ -0,0 +1,17 @@
+{
+  "metadata": {
+    "index": 15,
+    "module": "droidklipp_extension",
+    "maintained_by": "CodeMasterCody3D",
+    "display_name": "DroidKlipp",
+    "description": [
+      "Use an Android device as a KlipperScreen display via ADB and DroidKlipp APK / XServer XSDL integration",
+      "- Automatic USB ADB forwarding",
+      "- Optional WiFi fallback",
+      "- Starts and monitors KlipperScreen on the Android X server"
+    ],
+    "website": "https://github.com/CodeMasterCody3D/DroidKlipp-Android-APK/releases",
+    "repo": "https://github.com/CodeMasterCody3D/DroidKlipp",
+    "updates": true
+  }
+}
@@ -19,7 +19,7 @@ from core.logger import Logger
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
 from core.types.color import Color
-from extensions import EXTENSION_ROOT
+from extensions import EXTENSION_ROOT, GITHUB_ISSUES_URL
 from extensions.base_extension import BaseExtension


@@ -56,6 +56,22 @@ class ExtensionsMenu(BaseMenu):
                with open(metadata_json, "r") as m:
                    # read extension metadata from json
                    metadata = json.load(m).get("metadata")
+                    index = str(metadata.get("index"))
+
+                    # Prevent collisions where one extension silently overrides another.
+                    if index in ext_dict:
+                        existing_name = ext_dict[index].metadata.get("display_name")
+                        duplicate_name = metadata.get("display_name")
+                        Logger.print_warn(
+                            "Failed loading extension"
+                            f" {ext}: duplicate index '{index}'"
+                            f" already used by '{existing_name}'."
+                            f" Skipping '{duplicate_name}'."
+                            f" Please report this at {GITHUB_ISSUES_URL}."
+                        )
+                        continue
+
+                    int(index)
                    module_name = metadata.get("module")
                    module_path = f"kiauh.extensions.{ext.name}.{module_name}"

@@ -73,10 +89,20 @@ class ExtensionsMenu(BaseMenu):

                    # instantiate the extension with its metadata and add to dict
                    ext_instance: BaseExtension = ext_class(metadata)
-                    ext_dict[f"{metadata.get('index')}"] = ext_instance
+                    ext_dict[index] = ext_instance

-            except (IOError, json.JSONDecodeError, ImportError) as e:
-                print(f"Failed loading extension {ext}: {e}")
+            except (
+                IOError,
+                json.JSONDecodeError,
+                ImportError,
+                TypeError,
+                ValueError,
+                AttributeError,
+            ) as e:
+                Logger.print_warn(
+                    f"Failed loading extension {ext}: {e}. "
+                    f"Please report this at {GITHUB_ISSUES_URL}."
+                )

        return dict(sorted(ext_dict.items(), key=lambda x: int(x[0])))

@@ -16,7 +16,7 @@ from components.klipper.klipper import Klipper
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import Logger
 from core.services.backup_service import BackupService
-from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
 from extensions.base_extension import BaseExtension
@@ -0,0 +1,21 @@
+# ======================================================================= #
+#  Copyright (C) 2020 - 2026 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2026 Théo Gaillard <theo.gayar@gmail.com>                #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from pathlib import Path
+
+# repo
+KAMP_REPO = "https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging"
+
+# directories
+MODULE_PATH = Path(__file__).resolve().parent
+KAMP_DIR = Path.home().joinpath("Klipper-Adaptive-Meshing-Purging")
+KLIPPER_DIR = Path.home().joinpath("klipper")
+
+# names
+KAMP_MOONRAKER_UPDATER_NAME = "update_manager Klipper-Adaptive-Meshing-Purging"
@@ -0,0 +1,357 @@
+# ======================================================================= #
+#  Copyright (C) 2020 - 2026 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2026 Théo Gaillard <theo.gayar@gmail.com>                #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  It integrates Klipper Adaptive Meshing & Purging (KAMP):               #
+#  https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+import shutil
+from typing import List
+
+from components.klipper.klipper import Klipper
+from components.moonraker.moonraker import Moonraker
+from core.instance_manager.instance_manager import InstanceManager
+from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
+from core.simple_config_parser.simple_config_parser import (
+    SimpleConfigParser,
+)
+from extensions.base_extension import BaseExtension
+from extensions.klipper_adaptive_meshing_purging import (
+    KAMP_DIR,
+    KAMP_MOONRAKER_UPDATER_NAME,
+    KAMP_REPO,
+    KLIPPER_DIR,
+)
+from utils.config_utils import add_config_section, remove_config_section
+from utils.fs_utils import check_file_exist, create_symlink, run_remove_routines
+from utils.git_utils import git_clone_wrapper, git_pull_wrapper
+from utils.input_utils import get_confirm
+from utils.instance_utils import get_instances, stop_klipper_instances_interactively
+
+
+# noinspection PyMethodMayBeStatic
+class KlipperAdaptiveMeshingPurgingExtension(BaseExtension):
+    def install_extension(self, **kwargs) -> None:
+        Logger.print_status("Installing Klipper Adaptive Meshing Purging...")
+
+        klipper_dir_exists = check_file_exist(KLIPPER_DIR)
+        if not klipper_dir_exists:
+            Logger.print_warn(
+                "No Klipper directory found! Unable to install extension."
+            )
+            return
+
+        kl_instances: List[Klipper] = get_instances(Klipper)
+
+        kamp_exists = check_file_exist(KAMP_DIR) and self._check_cfg_exists(
+            kl_instances
+        )
+
+        overwrite = True
+        if kamp_exists:
+            overwrite = get_confirm(
+                question="Extension seems to be installed already. Overwrite?",
+                default_choice=True,
+                allow_go_back=False,
+            )
+
+        if not overwrite:
+            Logger.print_warn("Installation aborted due to user request.")
+            return
+
+        add_moonraker_update_section = get_confirm(
+            question="Add Klipper Adaptive Meshing and Purging to Moonraker update manager(s)?",
+            default_choice=True,
+            allow_go_back=False,
+        )
+
+        if not stop_klipper_instances_interactively(
+            kl_instances, "installation of KAMP"
+        ):
+            return
+
+        try:
+            git_clone_wrapper(KAMP_REPO, KAMP_DIR, force=True)
+
+            self._install_cfg(kl_instances)
+
+            if add_moonraker_update_section:
+                mr_instances: List[Moonraker] = get_instances(Moonraker)
+                self._add_moonraker_update_manager_section(mr_instances)
+            else:
+                Logger.print_info(
+                    "Skipping update section creation as per user request."
+                )
+                Logger.print_warn(
+                    "Make sure to create the corresponding section in your moonraker.conf in order to have it appear in your frontend update manager!"
+                )
+
+        except Exception as e:
+            Logger.print_error(
+                f"Error during Klipper Adaptive Meshing and Purging installation:\n{e}"
+            )
+
+            if kl_instances:
+                InstanceManager.start_all(kl_instances)
+            return
+
+        if kl_instances:
+            InstanceManager.start_all(kl_instances)
+
+        Logger.print_dialog(
+            DialogType.ATTENTION,
+            [
+                "Basic configuration files were created per instance. You must edit them to enable the extension.",
+                "Documentation:",
+                f"{KAMP_REPO}",
+                "\n\n",
+                "IMPORTANT:",
+                "1. If you'd like to use adaptive meshing, Klipper already has built-in support. Just call BED_MESH_CALIBRATE ADAPTIVE=1 in your PRINT_START macro. DO NOT USE THE FEATURE FROM THE EXTENSION",
+                "2. You MUST be thoughtful when editing values for the purge settings, as there is a risk to break parts of your printer.",
+                "3. According to KAMP's documentation, you should define 'max_extrude_cross_section' in 'printer.cfg' according to your needs.",
+            ],
+            margin_bottom=1,
+        )
+
+        Logger.print_ok("Klipper Adaptive Meshing and Purging installed successfully!")
+
+    def update_extension(self, **kwargs) -> None:
+        extension_installed = check_file_exist(KAMP_DIR)
+        if not extension_installed:
+            Logger.print_info("Extension does not seem to be installed! Skipping ...")
+            return
+
+        backup_before_update = get_confirm(
+            question="Backup Klipper Adaptive Meshing and Purging directory before update?",
+            default_choice=True,
+            allow_go_back=True,
+        )
+
+        kl_instances: List[Klipper] = get_instances(Klipper)
+
+        if not stop_klipper_instances_interactively(kl_instances, "update of KAMP"):
+            return
+
+        Logger.print_status("Updating Klipper Adaptive Meshing and Purging...")
+        try:
+            if backup_before_update:
+                Logger.print_status(
+                    "Backing up Klipper Adaptive Meshing and Purging directory ..."
+                )
+                svc = BackupService()
+                svc.backup_directory(
+                    source_path=KAMP_DIR,
+                    backup_name="Klipper-Adaptive-Meshing-Purging",
+                )
+                Logger.print_ok("Backup completed successfully.")
+
+            git_pull_wrapper(KAMP_DIR)
+
+        except Exception as e:
+            Logger.print_error(
+                f"Error during Klipper Adaptive Meshing and Purging update:\n{e}"
+            )
+
+            if kl_instances:
+                InstanceManager.start_all(kl_instances)
+                return
+
+        if kl_instances:
+            InstanceManager.start_all(kl_instances)
+
+        Logger.print_ok(
+            "Klipper Adaptive Meshing and Purging updated successfully.", end="\n\n"
+        )
+
+    def remove_extension(self, **kwargs) -> None:
+        extension_installed = check_file_exist(KAMP_DIR)
+        if not extension_installed:
+            Logger.print_info("Extension does not seem to be installed! Skipping ...")
+            return
+
+        kl_instances: List[Klipper] = get_instances(Klipper)
+
+        if not stop_klipper_instances_interactively(kl_instances, "removal of KAMP"):
+            return
+
+        try:
+            run_remove_routines(KAMP_DIR)
+            self._remove_cfg(kl_instances)
+
+            mr_instances: List[Moonraker] = get_instances(Moonraker)
+            self._remove_moonraker_update_manager_section(mr_instances)
+
+            BackupService().backup_printer_cfg()
+            remove_config_section("include KAMP_Settings.cfg", kl_instances)
+
+            Logger.print_dialog(
+                DialogType.ATTENTION,
+                [
+                    "You might want to remove [exclude_object] sections from 'printer.cfg', unless you use them for some other reason.",
+                    "\n\n",
+                    "You might also want to remove the [file_manager] sections from 'moonraker.conf', unless used otherwise.",
+                    "\n\n",
+                    "NOTE:",
+                    "'KAMP_Settings.cfg' is NOT removed automatically. ",
+                    "Please delete it manually if no longer needed.",
+                ],
+                margin_bottom=1,
+            )
+
+        except Exception as e:
+            Logger.print_error(f"Unable to remove extension:\n{e}")
+
+            if kl_instances:
+                InstanceManager.start_all(kl_instances)
+            return
+
+        if kl_instances:
+            InstanceManager.start_all(kl_instances)
+
+        Logger.print_ok("Klipper Adaptive Meshing and Purging removed successfully.")
+
+    def _install_cfg(self, kl_instances: List[Klipper]):
+        is_multi_instance = len(kl_instances) > 1
+        for instance in kl_instances:
+            cfg_dir = instance.base.cfg_dir
+            Logger.print_status(
+                f"Creating symlink for KAMP directory in '{cfg_dir}' ..."
+            )
+            create_symlink(KAMP_DIR.joinpath("Configuration"), cfg_dir.joinpath("KAMP"))
+            if is_multi_instance:
+                Logger.print_ok(f"Symlink successfully created for instance '{instance.suffix}'.")
+            else:
+                Logger.print_ok("Symlink successfully created.")
+
+            # We do not overwrite the existing config files ever
+            Logger.print_status(f"Creating KAMP_Settings.cfg in '{cfg_dir}' ...")
+            if check_file_exist(cfg_dir.joinpath("KAMP_Settings.cfg")):
+                Logger.print_info("File already exists! Skipping ...")
+                continue
+            try:
+                shutil.copy(
+                    KAMP_DIR.joinpath("Configuration/KAMP_Settings.cfg"),
+                    cfg_dir.joinpath("KAMP_Settings.cfg"),
+                )
+                if is_multi_instance:
+                    Logger.print_ok(f"Config file successfully created for instance '{instance.suffix}'.")
+                else:
+                    Logger.print_ok(f"Config file successfully created.")
+            except OSError as e:
+                Logger.print_error(f"Unable to create example config: {e}")
+
+        BackupService().backup_printer_cfg()
+
+        sections = ["include KAMP_Settings.cfg", "exclude_object"]
+        for instance in kl_instances:
+            cfg_file = instance.cfg_file
+            scp = SimpleConfigParser()
+            scp.read_file(cfg_file)
+
+            for section in sections:
+                if scp.has_section(section):
+                    continue
+                Logger.print_status(f"Add '{section}' to '{cfg_file}' ...")
+                scp.add_section(section)
+                scp.write_file(cfg_file)
+                Logger.print_ok("Done!")
+
+    def _add_moonraker_update_manager_section(
+        self, mr_instances: List[Moonraker]
+    ) -> None:
+        if not mr_instances:
+            Logger.print_dialog(
+                DialogType.WARNING,
+                [
+                    "Moonraker not found! Klipper Adaptive Meshing and Purging update "
+                    "manager support for Moonraker will not be added to moonraker.conf.",
+                ],
+            )
+            if not get_confirm(
+                "Continue Klipper Adaptive Meshing and Purging installation?",
+                default_choice=False,
+                allow_go_back=True,
+            ):
+                Logger.print_info("Installation aborted due to user request.")
+                return
+
+        BackupService().backup_moonraker_conf()
+
+        add_config_section(
+            section=KAMP_MOONRAKER_UPDATER_NAME,
+            instances=mr_instances,
+            options=[
+                ("type", "git_repo"),
+                ("channel", "dev"),
+                ("path", KAMP_DIR.as_posix()),
+                ("origin", KAMP_REPO),
+                ("managed_services", "klipper"),
+                ("primary_branch", "main"),
+            ],
+        )
+
+        add_config_section(
+            section="file_manager",
+            instances=mr_instances,
+            options=[
+                ("enable_object_processing", "True"),
+            ],
+        )
+
+        InstanceManager.restart_all(mr_instances)
+
+        Logger.print_ok(
+            "Klipper Adaptive Meshing and Purging successfully added to Moonraker update manager(s)!"
+        )
+
+    def _remove_moonraker_update_manager_section(
+        self, mr_instances: List[Moonraker]
+    ) -> None:
+        if not mr_instances:
+            Logger.print_dialog(
+                DialogType.WARNING,
+                [
+                    "Moonraker not found! Klipper Adaptive Meshing and Purging update "
+                    "manager support for Moonraker will not be removed from moonraker.conf.",
+                ],
+            )
+            return
+
+        BackupService().backup_moonraker_conf()
+
+        remove_config_section(KAMP_MOONRAKER_UPDATER_NAME, mr_instances)
+        InstanceManager.restart_all(mr_instances)
+
+        Logger.print_ok(
+            "Klipper Adaptive Meshing and Purging successfully removed from Moonraker update manager(s)!"
+        )
+
+    def _check_cfg_exists(self, kl_instances: List[Klipper]) -> bool:
+        cfg_dirs = [instance.base.cfg_dir for instance in kl_instances]
+
+        for cfg_dir in cfg_dirs:
+            if (
+                check_file_exist(cfg_dir.joinpath("KAMP_Settings.cfg"))
+                and check_file_exist(cfg_dir.joinpath("KAMP/KAMP_Settings.cfg"))
+                and check_file_exist(cfg_dir.joinpath("KAMP/Adaptive_Meshing.cfg"))
+                and check_file_exist(cfg_dir.joinpath("KAMP/Line_Purge.cfg"))
+                and check_file_exist(cfg_dir.joinpath("KAMP/Smart_Park.cfg"))
+                and check_file_exist(cfg_dir.joinpath("KAMP/Voron_Purge.cfg"))
+            ):
+                return True
+
+        return False
+
+    def _remove_cfg(self, kl_instances: List[Klipper]) -> None:
+        cfg_dirs = [instance.base.cfg_dir for instance in kl_instances]
+
+        for cfg_dir in cfg_dirs:
+            Logger.print_status(f"Removing KAMP symlink in '{cfg_dir}' ...")
+            run_remove_routines(cfg_dir.joinpath("KAMP"))
@@ -0,0 +1,13 @@
+{
+  "metadata": {
+    "index": 14,
+    "module": "klipper_adaptive_meshing_purging_extension",
+    "maintained_by": "theogayar",
+    "display_name": "Klipper Adaptive Meshing Purging",
+    "description": [
+      "Klipper extension for adaptive meshing and purging."
+    ],
+    "repo": "https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging",
+    "updates": true
+  }
+}
@@ -0,0 +1,34 @@
+# ======================================================================= #
+#  Copyright (C) 2020 - 2026 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2026 Paul Sharman <github.com/PEEKYPAUL>                 #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  It integrates Moongate for Klipper:                                    #
+#  https://github.com/PEEKYPAUL/Moongate                                  #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from pathlib import Path
+
+# repository
+MOONGATE_REPO = "https://github.com/PEEKYPAUL/moongate.git"
+MOONGATE_REPO_URL = "https://github.com/PEEKYPAUL/Moongate"
+
+# directories
+MODULE_PATH = Path(__file__).resolve().parent
+MOONGATE_DIR = Path.home().joinpath("moongate")
+MOONGATE_PLUGIN_DIR = MOONGATE_DIR.joinpath("klipper-plugin")
+
+# installer scripts shipped inside the cloned repo
+MOONGATE_INSTALL_SCRIPT = MOONGATE_PLUGIN_DIR.joinpath("install.sh")
+MOONGATE_UPDATE_SCRIPT = MOONGATE_PLUGIN_DIR.joinpath("update.sh")
+MOONGATE_UNINSTALL_SCRIPT = MOONGATE_PLUGIN_DIR.joinpath("uninstall.sh")
+
+# moonraker.conf sections the installer manages
+MOONGATE_UPDATER_NAME = "update_manager moongate"
+MOONGATE_CONFIG_SECTION = "moongate"
+
+# default HTTP port the Mainsail/Fluidd UI is served on
+MOONGATE_DEFAULT_PORT = 80
@@ -0,0 +1,15 @@
+{
+  "metadata": {
+    "index": 16,
+    "module": "moongate_extension",
+    "maintained_by": "PEEKYPAUL",
+    "display_name": "Moongate for Klipper",
+    "description": [
+      "Pair this printer with the Moongate Android app for secure remote",
+      "access and print monitoring. Installs cloudflared, a Cloudflare",
+      "quick-tunnel and an EdDSA auth gate in front of Moonraker."
+    ],
+    "repo": "https://github.com/PEEKYPAUL/Moongate",
+    "updates": true
+  }
+}
@@ -0,0 +1,249 @@
+# ======================================================================= #
+#  Copyright (C) 2020 - 2026 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2026 Paul Sharman <github.com/PEEKYPAUL>                 #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  It integrates Moongate for Klipper:                                    #
+#  https://github.com/PEEKYPAUL/Moongate                                  #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from __future__ import annotations
+
+import os
+from pathlib import Path
+from subprocess import CalledProcessError, run
+from typing import Dict, List
+
+from components.moonraker.moonraker import Moonraker
+from core.instance_manager.instance_manager import InstanceManager
+from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
+from extensions.base_extension import BaseExtension
+from extensions.moongate import (
+    MOONGATE_CONFIG_SECTION,
+    MOONGATE_DEFAULT_PORT,
+    MOONGATE_DIR,
+    MOONGATE_INSTALL_SCRIPT,
+    MOONGATE_REPO,
+    MOONGATE_REPO_URL,
+    MOONGATE_UNINSTALL_SCRIPT,
+    MOONGATE_UPDATE_SCRIPT,
+    MOONGATE_UPDATER_NAME,
+)
+from utils.config_utils import remove_config_section
+from utils.fs_utils import check_file_exist
+from utils.git_utils import GitException, git_clone_wrapper, git_pull_wrapper
+from utils.input_utils import get_confirm, get_number_input
+from utils.instance_utils import get_instances
+
+
+# noinspection PyMethodMayBeStatic
+class MoongateExtension(BaseExtension):
+    """
+    Moongate ships a substantial, security-sensitive and idempotent installer
+    (cloudflared, two systemd services, an EdDSA auth proxy, a Moonraker host
+    rebind and a tightly-scoped Avahi sudoers entry). Rather than mirror all
+    of that in Python — where it would drift out of sync with upstream — this
+    extension does the KIAUH-idiomatic parts natively (instance discovery,
+    confirmation, moonraker.conf backup, the repo clone wired to the update
+    manager) and delegates the heavy lifting to Moongate's own scripts.
+    """
+
+    def install_extension(self, **kwargs) -> None:
+        Logger.print_status("Installing Moongate for Klipper ...")
+
+        mr_instances: List[Moonraker] = get_instances(Moonraker)
+        if not mr_instances:
+            Logger.print_dialog(
+                DialogType.WARNING,
+                [
+                    "No Moonraker instances found!",
+                    "Moongate is a Moonraker component and needs Moonraker to be "
+                    "installed first. Please install Moonraker, then try again.",
+                ],
+            )
+            return
+
+        # Moongate is a single-printer integration. On a multi-instance host we
+        # target the first Moonraker instance and say so.
+        moonraker = mr_instances[0]
+        if len(mr_instances) > 1:
+            Logger.print_dialog(
+                DialogType.WARNING,
+                [
+                    "Multiple Moonraker instances detected.",
+                    "Moongate currently supports a single-printer setup. The "
+                    f"instance '{moonraker.data_dir.name}' will be used.",
+                ],
+            )
+
+        if not self._confirm_install():
+            Logger.print_info("Installation aborted.")
+            return
+
+        port = get_number_input(
+            "HTTP port your Mainsail/Fluidd UI is served on",
+            min_value=1,
+            max_value=65535,
+            default=MOONGATE_DEFAULT_PORT,
+        )
+        if port is None:
+            return
+
+        try:
+            self._clone_or_update_repo()
+
+            BackupService().backup_moonraker_conf()
+
+            # Hand off to Moongate's own installer. It is idempotent,
+            # non-interactive and env-driven: it installs cloudflared, adds the
+            # two systemd services, patches moonraker.conf and restarts
+            # Moonraker + Klipper itself.
+            self._run_script(
+                MOONGATE_INSTALL_SCRIPT,
+                moonraker,
+                extra_env={"MOONGATE_PORT": str(port)},
+            )
+        except (GitException, CalledProcessError, OSError) as e:
+            Logger.print_error(f"Error during Moongate installation:\n{e}")
+            return
+
+        Logger.print_dialog(
+            DialogType.SUCCESS,
+            [
+                "Moongate installed successfully!",
+                "\n\n",
+                "Next steps:",
+                "● Install the Moongate app on your Android device.",
+                "● Run MOONGATE_PAIR in the Klipper console (or open the pair "
+                "page printed above) and scan the QR code.",
+                "● Updates from now on: Mainsail/Fluidd > Software Updates > Moongate.",
+            ],
+            margin_bottom=1,
+        )
+
+    def update_extension(self, **kwargs) -> None:
+        Logger.print_status("Updating Moongate for Klipper ...")
+
+        if not check_file_exist(MOONGATE_DIR.joinpath(".git")):
+            Logger.print_info("Moongate does not seem to be installed. Skipping ...")
+            return
+
+        mr_instances: List[Moonraker] = get_instances(Moonraker)
+        if not mr_instances:
+            Logger.print_warn("No Moonraker instance found. Skipping ...")
+            return
+
+        try:
+            git_pull_wrapper(MOONGATE_DIR)
+            self._run_script(MOONGATE_UPDATE_SCRIPT, mr_instances[0])
+            InstanceManager.restart_all(mr_instances)
+        except (GitException, CalledProcessError, OSError) as e:
+            Logger.print_error(f"Error during Moongate update:\n{e}")
+            return
+
+        Logger.print_ok("Moongate updated successfully.", end="\n\n")
+
+    def remove_extension(self, **kwargs) -> None:
+        Logger.print_status("Removing Moongate for Klipper ...")
+
+        mr_instances: List[Moonraker] = get_instances(Moonraker)
+
+        if not get_confirm(
+            "This removes Moongate, cloudflared, both systemd services and all "
+            "Moongate config. Continue?",
+            default_choice=True,
+            allow_go_back=True,
+        ):
+            Logger.print_info("Removal aborted.")
+            return
+
+        # Preferred path: delegate to Moongate's own uninstaller, which stops
+        # and removes the services, cleans moonraker.conf, restores its backup
+        # and restarts Moonraker. MOONGATE_YES=1 makes it non-interactive
+        # (KIAUH already collected the confirmation above).
+        if check_file_exist(MOONGATE_UNINSTALL_SCRIPT):
+            try:
+                BackupService().backup_moonraker_conf()
+                target = mr_instances[0] if mr_instances else None
+                self._run_script(
+                    MOONGATE_UNINSTALL_SCRIPT,
+                    target,
+                    extra_env={"MOONGATE_YES": "1"},
+                )
+                Logger.print_ok("Moongate removed successfully.")
+                return
+            except (CalledProcessError, OSError) as e:
+                Logger.print_error(f"Error during Moongate removal:\n{e}")
+                # fall through to a best-effort native cleanup
+
+        # Fallback: the upstream uninstaller is gone (repo already deleted).
+        # Do a best-effort native cleanup so moonraker.conf is left consistent.
+        Logger.print_warn(
+            "Moongate uninstaller not found — doing a best-effort cleanup. You "
+            "may need to remove cloudflared and the moongate-* systemd services "
+            "manually."
+        )
+        if mr_instances:
+            BackupService().backup_moonraker_conf()
+            remove_config_section(MOONGATE_UPDATER_NAME, mr_instances)
+            remove_config_section(MOONGATE_CONFIG_SECTION, mr_instances)
+            InstanceManager.restart_all(mr_instances)
+        Logger.print_ok("Moongate configuration removed.")
+
+    # ------------------------------------------------------------------ #
+    #  helpers                                                            #
+    # ------------------------------------------------------------------ #
+    def _confirm_install(self) -> bool:
+        Logger.print_dialog(
+            DialogType.ATTENTION,
+            [
+                "Moongate pairs this printer with the Moongate Android app for "
+                "secure remote access and print monitoring.",
+                "\n\n",
+                "This is a heavier install than most extensions. It will:",
+                "● clone the Moongate repo to ~/moongate",
+                "● add the Moongate component to Moonraker and register it with "
+                "the update manager",
+                "● install cloudflared and open a Cloudflare quick-tunnel",
+                "● add two systemd services: moongate-authproxy + moongate-tunnel",
+                "● bind Moonraker to 127.0.0.1 (the auth proxy fronts the tunnel)",
+                "● add a tightly-scoped Avahi sudoers entry for LAN discovery",
+                "\n\n",
+                "Remote access relies on cloud infrastructure operated by the "
+                "Moongate author. Moongate is licensed under PolyForm "
+                "Noncommercial 1.0.0 (non-commercial use only).",
+                MOONGATE_REPO_URL,
+            ],
+            margin_bottom=1,
+        )
+        return bool(
+            get_confirm(
+                "Continue Moongate installation?",
+                default_choice=True,
+                allow_go_back=True,
+            )
+        )
+
+    def _clone_or_update_repo(self) -> None:
+        if check_file_exist(MOONGATE_DIR.joinpath(".git")):
+            git_pull_wrapper(MOONGATE_DIR)
+        else:
+            git_clone_wrapper(MOONGATE_REPO, MOONGATE_DIR)
+
+    def _run_script(
+        self,
+        script: Path,
+        moonraker: Moonraker | None,
+        extra_env: Dict[str, str] | None = None,
+    ) -> None:
+        env = os.environ.copy()
+        if moonraker is not None:
+            env["MOONRAKER_DIR"] = moonraker.moonraker_dir.as_posix()
+            env["PRINTER_DATA"] = moonraker.data_dir.as_posix()
+        if extra_env:
+            env.update(extra_env)
+        run(["bash", script.as_posix()], env=env, check=True)
@@ -16,7 +16,7 @@ from components.moonraker.moonraker import Moonraker
 from core.constants import CURRENT_USER
 from core.instance_manager.base_instance import BaseInstance
 from core.logger import Logger
-from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
 from extensions.obico import (
@@ -15,7 +15,7 @@ from core.instance_manager.base_instance import SUFFIX_BLACKLIST
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
 from core.services.backup_service import BackupService
-from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
 from extensions.base_extension import BaseExtension
@@ -12,7 +12,7 @@ from components.moonraker.moonraker import Moonraker
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
 from core.services.backup_service import BackupService
-from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
+from core.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
 from extensions.base_extension import BaseExtension
@@ -0,0 +1,28 @@
+# ======================================================================= #
+#  Copyright (C) 2020 - 2026 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from pathlib import Path
+
+# repo
+TMCA_REPO = "https://github.com/andrewmcgr/klipper_tmc_autotune"
+
+# directories
+TMCA_DIR = Path.home().joinpath("klipper_tmc_autotune")
+MODULE_PATH = Path(__file__).resolve().parent
+KLIPPER_DIR = Path.home().joinpath("klipper")
+KLIPPER_EXTRAS = KLIPPER_DIR.joinpath("klippy/extras")
+KLIPPER_PLUGINS = KLIPPER_DIR.joinpath("klippy/plugins")
+KLIPPER_EXTENSIONS_PATH = (
+    KLIPPER_PLUGINS if KLIPPER_PLUGINS.is_dir() else KLIPPER_EXTRAS
+)
+
+# files
+TMCA_EXAMPLE_CONFIG = TMCA_DIR.joinpath("docs/example.cfg")
+
+# names
+TMCA_MOONRAKER_UPDATER_NAME = "update_manager klipper_tmc_autotune"
Author	SHA1	Message	Date
dw-0	e20b85e00c	feat(tests): load live VM host/key from .env, keep inventory non-sensitive	2026-07-04 14:11:01 +02:00
dw-0	1d1bac1524	feat(tests): implement live VM acceptance test strategy (TODO-006 to TODO-010)	2026-07-04 13:38:52 +02:00
dw-0	7b5522ac94	feat(tests): add unit tests for shared utilities	2026-07-04 12:58:20 +02:00
Cody D Dixon	a42b730688	fix: catch FileNotFoundError in get_current_branch when component dir is missing (#813 ) Error when opening KIUAH fix get_current_branch only catches CalledProcessError, not FileNotFoundError. When crowsnest isn't installed, the missing dir propagates the exception. Fix	2026-06-29 22:43:10 +02:00
dw-0	77d6c87aa0	refactor(readme): update section titles and improve table formatting	2026-06-29 22:20:55 +02:00
dw-0	b893ff14f7	chore(readme): remove jetbrains as sponsor	2026-06-29 21:36:58 +02:00
dw-0	43b0994ac5	fix(README_zh): correct Fluidd logo image path in documentation	2026-06-29 21:31:55 +02:00
dw-0	040edc1d4f	chore: remove AGENTS.md	2026-06-28 12:50:59 +02:00
Paul Claude Opus 4.8 dw-0	750dba1dbe	feat(extensions): add Moongate for Klipper (#809 ) * feat(extensions): add Moongate for Klipper Adds Moongate for Klipper as extension #15 (next free index after KAMP). Moongate pairs a printer with the Moongate Android app for secure remote access and print monitoring over a Cloudflare quick-tunnel fronted by an EdDSA auth proxy. The extension is KIAUH-native for the parts KIAUH owns (Moonraker instance discovery, the install/remove confirmation dialogs, moonraker.conf backup, and the repo clone wired into the update manager) and delegates the heavy, security-sensitive install steps (cloudflared, the moongate-authproxy and moongate-tunnel systemd services, the Moonraker host rebind) to Moongate's own idempotent, non-interactive install/update/uninstall scripts so that logic stays maintained upstream in one place. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(metadata): update index for Moongate extension * refactor(moongate_extension): enhance error handling and update docstring for clarity --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> Co-authored-by: dw-0 <th33xitus@gmail.com>	2026-06-28 12:49:30 +02:00
Cody D Dixon Cody Dixon dw-0	6f4b471008	feat(extension): Add DroidKlipp extension (#804 ) * Add DroidKlipp extension * fix(extensions): restart adb_monitor and redeploy monitor on DroidKlipp update The update flow only ran git_pull_wrapper, which left the running adb_monitor service executing stale in-memory code. It also never rebuilt the deployed ~/droidklipp_monitor.py, since that file is generated by the installer rather than tracked in the repo. - stop adb_monitor before the pull, start it after (mirrors mobileraker) - after pulling, re-deploy droidklipp_monitor.py into $HOME so the service picks up the updated code - best-effort restart the service if the update fails * fix(droidklipp): clean up comments and update website link in metadata --------- Co-authored-by: Cody Dixon <codydixon71@gmail.com> Co-authored-by: dw-0 <th33xitus@gmail.com>	2026-06-28 12:07:19 +02:00
GustavoTheThirdanddw-0	5077765fd6	fix: fluidd logo (#811 ) * fix: fluid logo * fix: use correct logo.svg instead of avatar --------- Co-authored-by: dw-0 <th33xitus@gmail.com>	2026-06-27 12:53:20 +02:00
Patrick Gehrsitz	9f97ae6c2a	refactor(crowsnest): fix crowsnest install status and update for v5 (#799 ) fix: fix crowsnest install status and update for v5 Crowsnest v5 introduced multiple breaking changes resulting in a 'Incomplete' install status even after successful installation. This adds support for the new v5 setup with backwards compatibility for old versions. Signed-off-by: Patrick Gehrsitz <github@mryel.de>	2026-05-30 15:36:32 +02:00
_Redstone_c_	b90a8f13b1	fix(switch_repo): honor use_python_binary when recreating venv (#793 ) * fix(switch_repo): honor use_python_binary when recreating venv * fix(switch_repo): validate name at function entry	2026-04-24 13:34:45 +02:00
Théo Gaillardanddw-0	ea1b794afd	feat(extensions): Klipper-Adaptive-Meshing-Purging (#785 ) * feat(instance_manager): add interactive stopping of Klipper instances with user confirmation * fix(instance_utils): remove unnecessary 'self' parameter from stop_klipper_instances_interactively function * refactor(tmc_autotune): replace internal stop function with direct call to stop_klipper_instances_interactively * feat(klipper_adaptive_meshing_purging): add initial implementation of Klipper Adaptive Meshing and Purging extension * docs(klipper_adaptive_meshing_purging): update warning message with additional documentation note regarding max_extrude_cross_section * fix(klipper_adaptive_meshing_purging): update warning message formatting for clarity * fix(klipper_adaptive_meshing_purging): update warning message formatting for clarity * fix(_install_cfg): update symlink creation to point to Configuration directory * fix(license): update copyright information to include myself & upstream * fix(klipper_adaptive_meshing_purging): update moonraker updater name for consistency with upstream * style: add type annotations - Correct minor formatting issues in copyright headers. * fix: update import path for `simple_config_parser` * refactor: improve logging and configuration handling for KAMP installation and removal * style: clarify warning message for purge settings in KAMP extension --------- Co-authored-by: dw-0 <th33xitus@gmail.com>	2026-04-21 18:00:40 +02:00
dw-0	647a7d9400	feat: add initial AGENTS.md	2026-04-20 21:49:46 +02:00
Lazox12anddw-0	aa0609d143	fix: auto restart of KIAUH after update (#781 ) * fixed auto update * fixed the restarting logic * testing * removed test * fix: colored output and remove subshell usage in kiauh_update_dialog --------- Co-authored-by: dw-0 <th33xitus@gmail.com>	2026-04-19 20:10:36 +02:00
dw-0	2175bd55f9	refactor: integrate simple_config_parser as internal module	2026-04-19 15:48:06 +02:00
Patrick Gehrsitz	a935e67431	refactor: use correct crowsnest branch for v5 and future releases (#792 ) fix: fix crowsnest for v5 and future releases Signed-off-by: Patrick Gehrsitz <github@mryel.de>	2026-04-19 14:52:16 +02:00
dw-0	2f41e52189	fix(core): refresh system package list in update menu after update (#791 )	2026-04-19 12:21:17 +02:00
Théo Gaillard	757344128a	fix(extensions_menu): prevent extension index collisions during loading (#783 ) * fix(extensions_menu): prevent extension index collisions during loading * feat(extensions_menu): add GITHUB_ISSUES_URL for reporting extension loading issues	2026-03-22 13:43:20 +01:00
Théo Gaillard	7ca08f9b30	feat(instance_manager): add interactive stopping of Klipper instances (#784 ) * feat(instance_manager): add interactive stopping of Klipper instances with user confirmation * fix(instance_utils): remove unnecessary 'self' parameter from stop_klipper_instances_interactively function * refactor(tmc_autotune): replace internal stop function with direct call to stop_klipper_instances_interactively	2026-03-22 12:01:15 +01:00
David Rios	308079a821	fix: incorrect Logger.warn (#778 ) Fix method name	2026-02-27 22:45:58 +01:00
Théo Gaillard	09a5d96b63	feat(tmc_autotune): add initial implementation of TMC Autotune extens… (#771 ) * feat(tmc_autotune): add initial implementation of TMC Autotune extension with installation and update functionalities * fix: remove useless comments * fix: added support for Kalico style plugins directory * refactor: extract method for moonraker update manager section removal, automatically reloading moonraker upon call	2026-02-03 20:46:24 +01:00