Update changelog.md

script: add short changelog url to kiauh update message
script: remove KlipperScreen.log symlink dialog.
2025-12-14 11:04:29 +05:00 · 2021-06-15 17:22:39 +02:00 · 2021-06-15 16:40:10 +02:00 · 2021-06-15 16:12:58 +02:00 · 2021-06-15 15:56:13 +02:00 · 2021-06-15 15:56:13 +02:00
34 changed files with 1458 additions and 955 deletions
--- a/README.md
+++ b/README.md
@@ -1,6 +1,6 @@
 # **KIAUH - Klipper Installation And Update Helper**

-![main_menu](resources/screenshots/main.png)
+![main_menu](resources/screenshots/main_v3.png)

 ---

@@ -31,18 +31,11 @@ git clone https://github.com/th33xitus/kiauh.git
 ./kiauh/kiauh.sh
 ```

-## Additional Instructions:
-
-If you need some more detailed instructions on how to install Klipper and Mainsail with KIAUH, check out this website:\
-[Installing Klipper and Mainsail](https://3dp.tumbleweedlabs.com/firmware/klipper-firmware/installing-klipper-and-mainsail-on-your-raspberry-pi)\
-Credits for these instructions go to [@tumbleweedlabs](https://github.com/tumbleweedlabs).\
-Feel free to check out his work.
-
 ---

 ## **🧰 Functions and Features:**

- **New in v3.0** You can now install multiple instances (Klipper/Moonraker/DWC/Octoprint) on the same Pi!
+- **New in v3.0.0:** You can now install multiple instances (Klipper/Moonraker/DWC/Octoprint) on the same Pi!
 ---
 ### **Core Functions:**

@@ -67,18 +60,15 @@ Feel free to check out his work.

 ## **📝 Notes:**

- Tested **only** on Raspberry Pi OS Lite (Debian Buster)
- ( Although similar Debian based distributions might also work... )
+- Tested **only** on Raspberry Pi OS Lite (Debian 10 Buster)
+    - Other Debian based distributions can work
+    - Reported to work on Armbian too
 - During the use of this script you might be asked for your sudo password. There are several functions involved which need sudo privileges.

 ---

 ## **🛈 Sources & Further Information**

-If you need some more detailed instructions on how to install Klipper and Mainsail with KIAUH, check out this website:\
-[Installing Klipper and Mainsail](https://3dp.tumbleweedlabs.com/firmware/klipper-firmware/installing-klipper-and-mainsail-on-your-raspberry-pi)\
-Credits for these instructions go to [@tumbleweedlabs](https://github.com/tumbleweedlabs).
-
 For more information or instructions to the various components KIAUH can install, please check out the corresponding repositories listed below:

 ---
--- a/docs/changelog.md
+++ b/docs/changelog.md
@@ -2,6 +2,35 @@

 This document covers possible important changes to KIAUH.

+### 2021-06-15
+
+* Moonraker introduced an optional `log_path` which clients can make use of to show log files located in that folder to their users. More info here: https://github.com/Arksine/moonraker/commit/829b3a4ee80579af35dd64a37ccc092a1f67682a \
+Client developers agreed upon using `~/klipper_logs` as the new default log path.\
+That means, from now on, Klipper and Moonraker services installed with KIAUH will place their logfiles in that mentioned folder.
+* Additionally, KIAUH will now detect Klipper and Moonraker systemd services that still use the old default location of `/tmp/<service>.log` and will update them next time the user updates Klipper and/or Moonraker with the KIAUH update function.
+* Additional symlinks for the following logfiles will get created along those update procedures to make them accessible through the webinterface once its supported:
+    - webcamd.log
+    - mainsail-access.log
+    - mainsail-error.log
+    - fluidd-access.log
+    - fluidd-error.log
+* For MainsailOS and FluiddPi users:\
+MainsailOS and FluiddPi will switch the shipped Klipper service from SysVinit to systemd probably with their next release. KIAUH can already help migrate older MainsailOS (0.4.0 and below) and FluiddPi (v1.13.0) releases to match their new service-, file- and folder-structure so you don't have to re-flash the SD-Card of your Raspberry Pi.\
+In detail here is what is going to happen when you use the new "CustomPiOS Migration Helper" from the Advanced Menu `(Main Menu -> 4 -> Enter -> 10 -> Enter)` in a short summary:
+    1) The Klipper SysVinit service will get replaced by a Klipper systemd service
+    2) Klipper and Moonraker will use the new log-directory `~/klipper_logs`
+    3) The webcamd service gets updated
+    4) The webcamd script gets updated and moved from `/root/bin/webcamd` to `/usr/local/bin/webcamd`
+    5) The NGINX `upstreams.conf` gets updated to be able to configure up to 4 webcams
+    6) The `mainsail.txt` / `fluiddpi.txt` gets moved from `/boot` to `~/klipper_config` and renamed to `webcam.txt`
+    7) Symlinks for the webcamd.log and various NGINX logs get created in `~/klipper_config`
+    8) Configuration files for Klipper, Moonraker and webcamd get added to `/etc/logrotate.d`
+    9) If they still exist, two lines will be removed from the mainsail.cfg or client_macros.cfg macro configurations:\
+    `SAVE_GCODE_STATE NAME=PAUSE_state` and
+    `RESTORE_GCODE_STATE NAME=PAUSE_state`\
+* **Please note:**\
+The "CustomPiOS Migration Helper" is intended to only work on "vanilla" MainsailOS and FluiddPi systems. Do not try to migrate a modified MainsailOS or FluiddPi system (for example if you already used KIAUH to re-install services or to set up a multi-instance installation for Klipper / Moonraker). This won't work.
+
 ### 2021-01-31

 * **This is a big one... KIAUH v3.0 is out.**\
--- a/kiauh.sh
+++ b/kiauh.sh
@@ -47,7 +47,6 @@ KLIPPER_REPO=https://github.com/KevinOConnor/klipper.git
 ARKSINE_REPO=https://github.com/Arksine/klipper.git
 DMBUTYUGIN_REPO=https://github.com/dmbutyugin/klipper.git
 DWC2FK_REPO=https://github.com/Stephan3/dwc2-for-klipper-socket.git
-MOONRAKER_REPO=https://github.com/Arksine/moonraker.git
 KLIPPERSCREEN_REPO=https://github.com/jordanruthe/KlipperScreen.git
 #branches
 BRANCH_SCURVE_SMOOTHING=dmbutyugin/scurve-smoothing
--- a/resources/autocommit.sh
+++ b/resources/autocommit.sh
@@ -40,13 +40,11 @@ grab_version(){
    cd ..
  fi
  if [ ! -z "$mainsail_folder" ]; then
-    mainsail_file=$(find $mainsail_folder/js -name "app.*.js" 2>/dev/null)
-    mainsail_ver=$(grep -o -E 'state:{packageVersion:.+' $mainsail_file | cut -d'"' -f2)
+    mainsail_ver=$(head -n 1 $mainsail_folder/.version)
    m3="Mainsail version: $mainsail_ver"
  fi
  if [ ! -z "$fluidd_folder" ]; then
-    fluidd_file=$(find $fluidd_folder/js -name "app.*.js" 2>/dev/null)
-    fluidd_ver=$(grep -o -E '"setVersion",".+"' $fluidd_file | cut -d'"' -f4)
+    fluidd_ver=$(head -n 1 $fluidd_folder/.version)
    m4="Fluidd version: $fluidd_ver"
  fi
 }
--- a/resources/kiauh_macros.cfg
+++ b/resources/kiauh_macros.cfg
@@ -1,9 +1,9 @@
-#########################################################################################
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  AUTOCREATED WITH KIAUH  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #
-#########################################################################################
-# Those are the recommended macros and config entries if you use Mainsail or Fluidd!    #
-# Feel free to edit or delete those macros if you already have them defined elsewhere!  #
-#########################################################################################
+################################################################################
+# ~~~~~~~~~~~~~~~~~~~~~~~~  AUTOCREATED WITH KIAUH  ~~~~~~~~~~~~~~~~~~~~~~~~~~ #
+################################################################################
+# Recommended macros and config entries if you use Mainsail or Fluidd!         #
+# You can edit or delete those macros if you already defined them elsewhere!   #
+################################################################################

 [pause_resume]

@@ -19,20 +19,18 @@ gcode:

 [gcode_macro PAUSE]
 rename_existing: BASE_PAUSE
-# change this if you need more or less extrusion
-variable_extrude: 1.0
 gcode:
-    ##### read E from pause macro #####
-    {% set E = printer["gcode_macro PAUSE"].extrude|float %}
-    ##### set park positon for x and y #####
-    # default is your max posion from your printer.cfg
-    {% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
-    {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
+    ##### set defaults #####
+    {% set x = params.X|default(230) %}      #edit to your park position
+    {% set y = params.Y|default(230) %}      #edit to your park position
+    {% set z = params.Z|default(10)|float %} #edit to your park position
+    {% set e = params.E|default(1) %}        #edit to your retract length
    ##### calculate save lift position #####
    {% set max_z = printer.toolhead.axis_maximum.z|float %}
-    {% set act_z = printer.toolhead.position.x|float %}
-    {% if act_z < (max_z - 2.0) %}
-        {% set z_safe = 2.0 %}
+    {% set act_z = printer.toolhead.position.z|float %}
+    {% set lift_z = z|abs %}
+    {% if act_z < (max_z - lift_z) %}
+        {% set z_safe = lift_z %}
    {% else %}
        {% set z_safe = max_z - act_z %}
    {% endif %}
@@ -40,21 +38,22 @@ gcode:
    SAVE_GCODE_STATE NAME=PAUSE_state
    BASE_PAUSE
    G91
-    G1 E-{E} F2100
-    G1 Z{z_safe} F900
+    G1 E-{e} F2100
+    G1 Z{z_safe}
    G90
-    G1 X{x_park} Y{y_park} F6000
+    G1 X{x} Y{y} F6000
+

 [gcode_macro RESUME]
 rename_existing: BASE_RESUME
 gcode:
-    ##### read E from pause macro #####
-    {% set E = printer["gcode_macro PAUSE"].extrude|float %}
-    ##### end of definitions #####
+    ##### set defaults #####
+    {% set e = params.E|default(1) %} #edit to your retract length
    G91
-    G1 E{E} F2100
-    RESTORE_GCODE_STATE NAME=PAUSE_state
+    G1 E{e} F2100
+    G90
+    RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
    BASE_RESUME

-#########################################################################################
-#########################################################################################
+################################################################################
+################################################################################
--- a/resources/klipper.service
+++ b/resources/klipper.service
@@ -0,0 +1,15 @@
+#Systemd service file for klipper
+[Unit]
+Description=Starts klipper instance %INST% on startup
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+Type=simple
+User=%USER%
+RemainAfterExit=yes
+ExecStart=%KL_ENV%/bin/python %KL_DIR%/klippy/klippy.py %P_CFG% -I %P_TMP% -l %KL_LOG% -a %KL_UDS%
+Restart=always
+RestartSec=10
--- a/resources/klipper_webui_nginx.cfg
+++ b/resources/klipper_webui_nginx.cfg
@@ -2,12 +2,11 @@

 server {
    listen 80;
-    listen [::]:80;

    access_log /var/log/nginx/<<UI>>-access.log;
    error_log /var/log/nginx/<<UI>>-error.log;

-    #disable this section on smaller hardware like a pi zero
+    # disable this section on smaller hardware like a pi zero
    gzip on;
    gzip_vary on;
    gzip_proxied any;
@@ -17,15 +16,18 @@ server {
    gzip_http_version 1.1;
    gzip_types text/plain text/css text/xml text/javascript application/x-javascript application/json application/xml;

-    #web_path from <<UI>> static files
+    # web_path from <<UI>> static files
    root /home/pi/<<UI>>;

    index index.html;
    server_name _;

-    #max upload size for gcodes (0 = no limit)
+    # disable max upload size checks
    client_max_body_size 0;

+    # disable proxy request buffering
+    proxy_request_buffering off;
+
    location / {
        try_files $uri $uri/ /index.html;
    }
--- a/resources/moonraker.conf
+++ b/resources/moonraker.conf
@@ -0,0 +1,44 @@
+[server]
+host: 0.0.0.0
+port: %PORT%
+enable_debug_logging: False
+config_path: %CFG%
+log_path: %LOG%
+database_path: %MR_DB%
+klippy_uds_address: %UDS%
+
+[authorization]
+trusted_clients:
+    127.0.0.1
+    %LAN%
+    ::1/128
+    FE80::/10
+cors_domains:
+    *.lan
+    *.local
+    *://my.mainsail.xyz
+    *://app.fluidd.xyz
+
+[octoprint_compat]
+
+[history]
+
+[update_manager]
+
+[update_manager client mainsail]
+type: web
+repo: meteyou/mainsail
+path: ~/mainsail
+
+[update_manager client fluidd]
+type: web
+repo: cadriel/fluidd
+path: ~/fluidd
+
+#[update_manager client KlipperScreen]
+#type: git_repo
+#path: /home/%USER%/KlipperScreen
+#origin: https://github.com/jordanruthe/KlipperScreen.git
+#env: /home/%USER%/.KlipperScreen-env/bin/python
+#requirements: scripts/KlipperScreen-requirements.txt
+#install_script: scripts/KlipperScreen-install.sh
--- a/resources/moonraker.service
+++ b/resources/moonraker.service
@@ -0,0 +1,15 @@
+#Systemd service file for moonraker
+[Unit]
+Description=Starts Moonraker %INST% on startup
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+Type=simple
+User=%USER%
+RemainAfterExit=yes
+ExecStart=%MR_ENV%/bin/python %MR_DIR%/moonraker/moonraker.py -l %MR_LOG% -c %MR_CONF%
+Restart=always
+RestartSec=10
--- a/resources/printer.cfg
+++ b/resources/printer.cfg
@@ -0,0 +1,14 @@
+[mcu]
+serial: /dev/serial/by-id/<your-mcu-id>
+
+[pause_resume]
+
+[display_status]
+
+[virtual_sdcard]
+path: ~/gcode_files
+
+[printer]
+kinematics: none
+max_velocity: 1000
+max_accel: 1000
--- a/resources/screenshots/main.png
+++ b/resources/screenshots/main.png
--- a/resources/screenshots/main_v3.png
+++ b/resources/screenshots/main_v3.png
--- a/resources/webcamd.service
+++ b/resources/webcamd.service
@@ -0,0 +1,16 @@
+[Unit]
+Description=Starts mjpg-streamer on startup
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+Type=forking
+User=%USER%
+WorkingDirectory=/usr/local/bin
+StandardOutput=append:/var/log/webcamd.log
+StandardError=append:/var/log/webcamd.log
+ExecStart=/usr/local/bin/webcamd
+Restart=always
+RestartSec=10
--- a/scripts/backup.sh
+++ b/scripts/backup.sh
@@ -35,9 +35,9 @@ read_bb4u_stat(){
  fi
 }

-##############################################################################################
-#********************************************************************************************#
-##############################################################################################
+################################################################################
+#******************************************************************************#
+################################################################################

 backup_printer_cfg(){
  check_for_backup_dir
@@ -68,17 +68,21 @@ backup_klipper_config_dir(){
  fi
 }

-
-###TODO re-evaluate if this function is still needed (just backup the full klipper_config dir instead?)
-backup_moonraker_conf(){
+backup_moonraker_database(){
  check_for_backup_dir
-  if [ -f ${HOME}/moonraker.conf ]; then
+  if ls -d ${HOME}/.moonraker_database* 2>/dev/null 1>&2; then
    get_date
    status_msg "Timestamp: $current_date"
-    status_msg "Create backup of moonraker.conf ..."
-    cp ${HOME}/moonraker.conf $BACKUP_DIR/moonraker.conf."$current_date".backup && ok_msg "Backup complete!"
+    mkdir -p "$BACKUP_DIR/mr_db_backup/$current_date"
+    for database in $(ls -d ${HOME}/.moonraker_database*)
+    do
+      status_msg "Create backup of $database ..."
+      cp -r $database "$BACKUP_DIR/mr_db_backup/$current_date"
+      ok_msg "Done!"
+    done
+    ok_msg "Backup complete!\n"
  else
-    ok_msg "No moonraker.conf found! Skipping backup ..."
+    ok_msg "No Moonraker database found! Skipping backup ..."
  fi
 }

--- a/scripts/functions.sh
+++ b/scripts/functions.sh
@@ -1,3 +1,6 @@
+### base variables
+SYSTEMDDIR="/etc/systemd/system"
+
 # setting up some frequently used functions
 check_euid(){
  if [ "$EUID" -eq 0 ]
@@ -77,54 +80,55 @@ change_klipper_cfg_path(){
  done
 }

-###? if path was changed in 'change_klipper_cfg_path', we need to edit the service files
-###? and set the new path. after that, rename the old folder and reload service units.
-###! users shouldn't try and move the files into subfolders with this function! as the mv command will fail
-###! but the new path still gets written to the service files. if they really need to, they need to move all
-###! config files or printer folder into that subfolder (still not recommended!)
 set_klipper_cfg_path(){
  ### stop services
  klipper_service "stop" && moonraker_service "stop"

-  ### rename the klipper config folder
+  ### copy config files to new klipper config folder
  if [ ! -z "$old_klipper_cfg_loc" ] && [ -d "$old_klipper_cfg_loc" ]; then
-    status_msg "Renaming '$old_klipper_cfg_loc' to '$new_klipper_cfg_loc'!"; echo
-    mv -v "$old_klipper_cfg_loc" "$new_klipper_cfg_loc" && ok_msg "Done!"
+    if [ ! -d "$new_klipper_cfg_loc" ]; then
+      status_msg "Copy config files to '$new_klipper_cfg_loc' ..."
+      mkdir -p $new_klipper_cfg_loc
+      cd $old_klipper_cfg_loc
+      cp -r -v ./* $new_klipper_cfg_loc
+      ok_msg "Done!"
+    fi
  fi

  ### handle single klipper instance service file
-  if [ -f /etc/systemd/system/klipper.service ]; then
+  if [ -f $SYSTEMDDIR/klipper.service ]; then
    status_msg "Configuring Klipper for new path ..."
-    sudo sed -i "/ExecStart=/ s|$old_klipper_cfg_loc/printer.cfg|$new_klipper_cfg_loc/printer.cfg|" /etc/systemd/system/klipper.service
+    sudo sed -i -r "/ExecStart=/ s| (.+)\/printer.cfg| $new_klipper_cfg_loc/printer.cfg|" $SYSTEMDDIR/klipper.service
    ok_msg "OK!"
  fi
  ### handle multi klipper instance service file
-  if ls /etc/systemd/system/klipper-*.service 2>/dev/null 1>&2; then
+  if ls $SYSTEMDDIR/klipper-*.service 2>/dev/null 1>&2; then
    status_msg "Configuring Klipper for new path ..."
-    for service in $(find /etc/systemd/system/klipper-*.service); do
-      sudo sed -i "/ExecStart=/ s|$old_klipper_cfg_loc/printer_|$new_klipper_cfg_loc/printer_|" $service
+    for service in $(find $SYSTEMDDIR/klipper-*.service); do
+      sudo sed -i -r "/ExecStart=/ s| (.+)\/printer_| $new_klipper_cfg_loc/printer_|" $service
    done
    ok_msg "OK!"
  fi

  ### handle single moonraker instance service and moonraker.conf file
-  if [ -f /etc/systemd/system/moonraker.service ]; then
+  if [ -f $SYSTEMDDIR/moonraker.service ]; then
    status_msg "Configuring Moonraker for new path ..."
-    sudo sed -i "/ExecStart=/ s|$old_klipper_cfg_loc/moonraker.conf|$new_klipper_cfg_loc/moonraker.conf|" /etc/systemd/system/moonraker.service
+    sudo sed -i -r "/ExecStart=/ s|-c (.+)\/moonraker\.conf|-c $new_klipper_cfg_loc/moonraker.conf|" $SYSTEMDDIR/moonraker.service
+
    ### replace old file path with new one in moonraker.conf
-    sed -i "/config_path:/ s|config_path:.*|config_path: $new_klipper_cfg_loc|" $new_klipper_cfg_loc/moonraker.conf
+    sed -i -r "/config_path:/ s|config_path:.*|config_path: $new_klipper_cfg_loc|" $new_klipper_cfg_loc/moonraker.conf
    ok_msg "OK!"
  fi
  ### handle multi moonraker instance service file
-  if ls /etc/systemd/system/moonraker-*.service 2>/dev/null 1>&2; then
+  if ls $SYSTEMDDIR/moonraker-*.service 2>/dev/null 1>&2; then
    status_msg "Configuring Moonraker for new path ..."
-    for service in $(find /etc/systemd/system/moonraker-*.service); do
-      sudo sed -i "/ExecStart=/ s|$old_klipper_cfg_loc/printer_|$new_klipper_cfg_loc/printer_|" $service
+    for service in $(find $SYSTEMDDIR/moonraker-*.service); do
+      sudo sed -i -r "/ExecStart=/ s|-c (.+)\/printer_|-c $new_klipper_cfg_loc/printer_|" $service
    done
    ### replace old file path with new one in moonraker.conf
    for moonraker_conf in $(find $new_klipper_cfg_loc/printer_*/moonraker.conf); do
      loc=$(echo "$moonraker_conf" | rev | cut -d"/" -f2- | rev)
-      sed -i "/config_path:/ s|config_path:.*|config_path: $loc|" $moonraker_conf
+      sed -i -r "/config_path:/ s|config_path:.*|config_path: $loc|" $moonraker_conf
    done
    ok_msg "OK!"
  fi
@@ -244,6 +248,9 @@ toggle_octoprint_service(){

 read_octoprint_service_status(){
  unset OPRINT_SERVICE_STATUS
+  if [ ! -f "/etc/systemd/system/octoprint.service" ]; then
+    return 0
+  fi
  if systemctl list-unit-files | grep -E "octoprint*" | grep "enabled" &>/dev/null; then
    OPRINT_SERVICE_STATUS="${red}[Disable]${default} OctoPrint Service                       "
  else
@@ -291,7 +298,7 @@ dependency_check(){
      echo -e "${cyan}● $element ${default}"
    done
    echo
-    sudo apt-get install ${inst[@]} -y
+    sudo apt-get update && sudo apt-get install ${inst[@]} -y
    ok_msg "Dependencies installed!"
    #clearing the array
    unset inst
@@ -333,10 +340,8 @@ setup_gcode_shell_command(){
      Y|y|Yes|yes|"")
        if [ -d $KLIPPER_DIR/klippy/extras ]; then
          status_msg "Installing gcode shell command extension ..."
-          status_msg "Copy gcode_shell_command.py to '$KLIPPER_DIR/klippy/extras' ..."
          if [ -f $KLIPPER_DIR/klippy/extras/gcode_shell_command.py ]; then
-            warn_msg "There is already a file named 'gcode_shell_command.py'"
-            warn_msg "in the destination location!"
+            warn_msg "There is already a file named 'gcode_shell_command.py'\nin the destination location!"
            while true; do
              read -p "${cyan}###### Do you want to overwrite it? (Y/n):${default} " yn
              case "$yn" in
@@ -366,10 +371,10 @@ setup_gcode_shell_command(){

 install_gcode_shell_command(){
  klipper_service "stop"
-  status_msg "Copy 'gcode_shell_command.py' to $KLIPPER_DIR/klippy/extras"
+  status_msg "Copy 'gcode_shell_command.py' to '$KLIPPER_DIR/klippy/extras' ..."
  cp ${SRCDIR}/kiauh/resources/gcode_shell_command.py $KLIPPER_DIR/klippy/extras
-  echo
  while true; do
+    echo
    read -p "${cyan}###### Do you want to create the example shell command? (Y/n):${default} " yn
    case "$yn" in
      Y|y|Yes|yes|"")
--- a/scripts/install_klipper.sh
+++ b/scripts/install_klipper.sh
@@ -6,8 +6,12 @@ KLIPPER_DIR="${HOME}/klipper"
 klipper_setup_dialog(){
  status_msg "Initializing Klipper installation ..."

-  ### check for existing klipper service installations
-  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "klipper.service")" ] || [ "$(systemctl list-units --full -all -t service --no-legend | grep -E "klipper-[[:digit:]].service")" ]; then
+  ### check for existing klipper service files
+  INITD=$(ls /etc/init.d | grep -E "^klipper(\-[[:digit:]]+)?$")
+  SYSTEMD=$(ls /etc/systemd/system | grep -E "^klipper(\-[[:digit:]]+)?\.service$")
+
+  if [ ! -z "$INITD" ] || [ ! -z "$SYSTEMD" ]; then
+    echo "${red}$INITD${default}" && echo "${red}$SYSTEMD${default}"
    ERROR_MSG="At least one Klipper service is already installed!\n Please remove Klipper first, before installing it again." && return 0
  fi

@@ -15,19 +19,19 @@ klipper_setup_dialog(){
  check_klipper_cfg_path

  ### ask for amount of instances to create
-  while true; do
+  INSTANCE_COUNT=""
+  while [[ ! ($INSTANCE_COUNT =~ ^[1-9]+$) ]]; do
+    echo
+    read -p "${cyan}###### Number of Klipper instances to set up:${default} " INSTANCE_COUNT
+    if [[ ! ($INSTANCE_COUNT =~ ^[1-9]+$) ]]; then
+      warn_msg "Invalid Input!" && echo
+    else
      echo
-      read -p "${cyan}###### How many Klipper instances do you want to set up?:${default} " INSTANCE_COUNT
-      echo
-      if [ $INSTANCE_COUNT == 1 ]; then
-        read -p "${cyan}###### Create $INSTANCE_COUNT single instance? (Y/n):${default} " yn
-      else
-        read -p "${cyan}###### Create $INSTANCE_COUNT instances? (Y/n):${default} " yn
-      fi
+      read -p "${cyan}###### Install $INSTANCE_COUNT instance(s)? (Y/n):${default} " yn
      case "$yn" in
        Y|y|Yes|yes|"")
          echo -e "###### > Yes"
-          status_msg "Creating $INSTANCE_COUNT Klipper instances ..."
+          status_msg "Installing $INSTANCE_COUNT Klipper instance(s) ..."
          klipper_setup
          break;;
        N|n|No|no)
@@ -38,24 +42,22 @@ klipper_setup_dialog(){
        *)
          print_unkown_cmd
          print_msg && clear_msg;;
-    esac
+      esac
+    fi
  done
 }

 install_klipper_packages(){
-  ### Packages for python cffi
-  PKGLIST="python-virtualenv virtualenv python-dev libffi-dev build-essential"
-  ### kconfig requirements
-  PKGLIST="${PKGLIST} libncurses-dev"
-  ### hub-ctrl
-  PKGLIST="${PKGLIST} libusb-dev"
-  ### AVR chip installation and building
-  PKGLIST="${PKGLIST} avrdude gcc-avr binutils-avr avr-libc"
-  ### ARM chip installation and building
-  PKGLIST="${PKGLIST} stm32flash libnewlib-arm-none-eabi"
-  PKGLIST="${PKGLIST} gcc-arm-none-eabi binutils-arm-none-eabi libusb-1.0"
-  ### dbus requirement for DietPi
-  PKGLIST="${PKGLIST} dbus"
+  ### read PKGLIST from official install script
+  status_msg "Reading dependencies..."
+  install_script="${HOME}/klipper/scripts/install-octopi.sh"
+  PKGLIST=$(grep "PKGLIST=" $install_script | sed 's/PKGLIST//g; s/[$={}\n"]//g')
+  ### rewrite packages into new array
+  unset PKGARR
+  for PKG in $PKGLIST; do PKGARR+=($PKG); done
+  ### add dbus requirement for DietPi distro
+  PKGARR+=("dbus")
+  echo "${cyan}${PKGARR[@]}${default}"

  ### Update system package info
  status_msg "Running apt-get update..."
@@ -63,7 +65,7 @@ install_klipper_packages(){

  ### Install desired packages
  status_msg "Installing packages..."
-  sudo apt-get install --yes ${PKGLIST}
+  sudo apt-get install --yes ${PKGARR[@]}
 }

 create_klipper_virtualenv(){
@@ -74,178 +76,112 @@ create_klipper_virtualenv(){
  ${KLIPPY_ENV}/bin/pip install -r ${KLIPPER_DIR}/scripts/klippy-requirements.txt
 }

-create_single_klipper_startscript(){
-### create systemd service file
-sudo /bin/sh -c "cat > $SYSTEMDDIR/klipper.service" << SINGLE_STARTSCRIPT
-#Systemd service file for klipper
-[Unit]
-Description=Starts klipper on startup
-After=network.target
-[Install]
-WantedBy=multi-user.target
-[Service]
-Type=simple
-User=$USER
-RemainAfterExit=yes
-ExecStart=${KLIPPY_ENV}/bin/python ${KLIPPER_DIR}/klippy/klippy.py ${PRINTER_CFG} -l ${KLIPPER_LOG} -a ${KLIPPY_UDS}
-Restart=always
-RestartSec=10
-SINGLE_STARTSCRIPT
-}
-
-create_multi_klipper_startscript(){
-### create multi instance systemd service file
-sudo /bin/sh -c "cat > $SYSTEMDDIR/klipper-$INSTANCE.service" << MULTI_STARTSCRIPT
-#Systemd service file for klipper
-[Unit]
-Description=Starts klipper instance $INSTANCE on startup
-After=network.target
-[Install]
-WantedBy=multi-user.target
-[Service]
-Type=simple
-User=$USER
-RemainAfterExit=yes
-ExecStart=${KLIPPY_ENV}/bin/python ${KLIPPER_DIR}/klippy/klippy.py ${PRINTER_CFG} -I ${TMP_PRINTER} -l ${KLIPPER_LOG} -a ${KLIPPY_UDS}
-Restart=always
-RestartSec=10
-MULTI_STARTSCRIPT
-}
-
-create_minimal_printer_cfg(){
-/bin/sh -c "cat > $1" << MINIMAL_CFG
-[mcu]
-serial: /dev/serial/by-id/<your-mcu-id>
-
-[pause_resume]
-
-[display_status]
-
-[virtual_sdcard]
-path: ~/gcode_files
-
-[printer]
-kinematics: none
-max_velocity: 1000
-max_accel: 1000
-MINIMAL_CFG
-}
-
 klipper_setup(){
-  ### get printer config directory
-  source_kiauh_ini
-  PRINTER_CFG_LOC="$klipper_cfg_loc"
-
-  ### clone klipper
-  cd ${HOME}
+  ### step 1: clone klipper
  status_msg "Downloading Klipper ..."
+  ### force remove existing klipper dir and clone into fresh klipper dir
  [ -d $KLIPPER_DIR ] && rm -rf $KLIPPER_DIR
-  git clone $KLIPPER_REPO
+  cd ${HOME} && git clone $KLIPPER_REPO
  status_msg "Download complete!"

-  ### install klipper dependencies and create python virtualenv
+  ### step 2: install klipper dependencies and create python virtualenv
  status_msg "Installing dependencies ..."
  install_klipper_packages
  create_klipper_virtualenv

-  ### create shared gcode_files folder
+  ### step 3: create shared gcode_files and logs folder
  [ ! -d ${HOME}/gcode_files ] && mkdir -p ${HOME}/gcode_files
-  ### create shared config folder
-  [ ! -d $PRINTER_CFG_LOC ] && mkdir -p $PRINTER_CFG_LOC
+  [ ! -d ${HOME}/klipper_logs ] && mkdir -p ${HOME}/klipper_logs

-  ### create klipper instances
-  INSTANCE=1
-  if [ $INSTANCE_COUNT -eq $INSTANCE ]; then
-    create_single_klipper_instance
-  else
-    create_multi_klipper_instance
-  fi
-}
-
-create_single_klipper_instance(){
-  status_msg "Setting up 1 Klipper instance ..."
-
-  ### single instance variables
-  KLIPPER_LOG=/tmp/klippy.log
-  KLIPPY_UDS=/tmp/klippy_uds
-  PRINTER_CFG="$PRINTER_CFG_LOC/printer.cfg"
-
-  ### create instance
-  status_msg "Creating single Klipper instance ..."
-  status_msg "Installing system start script ..."
-  create_single_klipper_startscript
-
-  ### create printer config directory if missing
-  [ ! -d $PRINTER_CFG_LOC ] && mkdir -p $PRINTER_CFG_LOC
-
-  ### create basic configs if missing
-  [ ! -f $PRINTER_CFG ] && create_minimal_printer_cfg "$PRINTER_CFG"
-
-  ### enable instance
-  sudo systemctl enable klipper.service
-  ok_msg "Single Klipper instance created!"
-
-  ### launching instance
-  status_msg "Launching Klipper instance ..."
-  sudo systemctl start klipper
-
-  ### confirm message
-  CONFIRM_MSG="Single Klipper instance has been set up!"
-  print_msg && clear_msg
-}
-
-create_multi_klipper_instance(){
-  status_msg "Setting up $INSTANCE_COUNT instances of Klipper ..."
-  while [ $INSTANCE -le $INSTANCE_COUNT ]; do
-    ### multi instance variables
-    KLIPPER_LOG=/tmp/klippy-$INSTANCE.log
-    KLIPPY_UDS=/tmp/klippy_uds-$INSTANCE
-    TMP_PRINTER=/tmp/printer-$INSTANCE
-    PRINTER_CFG="$PRINTER_CFG_LOC/printer_$INSTANCE/printer.cfg"
-
-    ### create instance
-    status_msg "Creating instance #$INSTANCE ..."
-    create_multi_klipper_startscript
-
-    ### create printer config directory if missing
-    [ ! -d $PRINTER_CFG_LOC/printer_$INSTANCE ] && mkdir -p $PRINTER_CFG_LOC/printer_$INSTANCE
-
-    ### create basic configs if missing
-    [ ! -f $PRINTER_CFG ] && create_minimal_printer_cfg "$PRINTER_CFG"
-
-    ### enable instance
-    sudo systemctl enable klipper-$INSTANCE.service
-    ok_msg "Klipper instance $INSTANCE created!"
-
-    ### launching instance
-    status_msg "Launching Klipper instance $INSTANCE ..."
-    sudo systemctl start klipper-$INSTANCE
-
-    ### instance counter +1
-    INSTANCE=$(expr $INSTANCE + 1)
-  done
+  ### step 4: create klipper instances
+  create_klipper_service

  ### confirm message
  CONFIRM_MSG="$INSTANCE_COUNT Klipper instances have been set up!"
+  [ $INSTANCE_COUNT -eq 1 ] && CONFIRM_MSG="Klipper has been set up!"
  print_msg && clear_msg
 }

+create_klipper_service(){
+  ### get config directory
+  source_kiauh_ini

-##############################################################################################
-#********************************************************************************************#
-##############################################################################################
+  ### set up default values
+  SINGLE_INST=1
+  CFG_PATH="$klipper_cfg_loc"
+  KL_ENV=$KLIPPY_ENV
+  KL_DIR=$KLIPPER_DIR
+  KL_LOG="${HOME}/klipper_logs/klippy.log"
+  KL_UDS="/tmp/klippy_uds"
+  P_TMP="/tmp/printer"
+  P_CFG="$CFG_PATH/printer.cfg"
+  P_CFG_SRC="${SRCDIR}/kiauh/resources/printer.cfg"
+  KL_SERV_SRC="${SRCDIR}/kiauh/resources/klipper.service"
+  KL_SERV_TARGET="$SYSTEMDDIR/klipper.service"

+  write_kl_service(){
+    [ ! -d $CFG_PATH ] && mkdir -p $CFG_PATH
+    ### create a minimal config if there is no printer.cfg
+    [ ! -f $P_CFG ] && cp $P_CFG_SRC $P_CFG
+    ### replace placeholder
+    if [ ! -f $KL_SERV_TARGET ]; then
+      status_msg "Creating Klipper Service $i ..."
+        sudo cp $KL_SERV_SRC $KL_SERV_TARGET
+        sudo sed -i "s|%INST%|$i|" $KL_SERV_TARGET
+        sudo sed -i "s|%USER%|${USER}|" $KL_SERV_TARGET
+        sudo sed -i "s|%KL_ENV%|$KL_ENV|" $KL_SERV_TARGET
+        sudo sed -i "s|%KL_DIR%|$KL_DIR|" $KL_SERV_TARGET
+        sudo sed -i "s|%KL_LOG%|$KL_LOG|" $KL_SERV_TARGET
+        sudo sed -i "s|%P_CFG%|$P_CFG|" $KL_SERV_TARGET
+        sudo sed -i "s|%P_TMP%|$P_TMP|" $KL_SERV_TARGET
+        sudo sed -i "s|%KL_UDS%|$KL_UDS|" $KL_SERV_TARGET
+    fi
+  }
+
+  if [ $SINGLE_INST -eq $INSTANCE_COUNT ]; then
+    ### write single instance service
+    write_kl_service
+    ### enable instance
+    sudo systemctl enable klipper.service
+    ok_msg "Single Klipper instance created!"
+    ### launching instance
+    status_msg "Launching Klipper instance ..."
+    sudo systemctl start klipper
+  else
+    i=1
+    while [ $i -le $INSTANCE_COUNT ]; do
+      ### rewrite default variables for multi instance cases
+      CFG_PATH="$klipper_cfg_loc/printer_$i"
+      KL_SERV_TARGET="$SYSTEMDDIR/klipper-$i.service"
+      P_TMP="/tmp/printer-$i"
+      P_CFG="$CFG_PATH/printer.cfg"
+      KL_LOG="${HOME}/klipper_logs/klippy-$i.log"
+      KL_UDS="/tmp/klippy_uds-$i"
+      ### write multi instance service
+      write_kl_service
+      ### enable instance
+      sudo systemctl enable klipper-$i.service
+      ok_msg "Klipper instance #$i created!"
+      ### launching instance
+      status_msg "Launching Klipper instance #$i ..."
+      sudo systemctl start klipper-$i
+
+      ### raise values by 1
+      i=$((i+1))
+    done
+    unset i
+  fi
+}

 flash_routine(){
  echo
  top_border
  echo -e "|        ${red}~~~~~~~~~~~ [ ATTENTION! ] ~~~~~~~~~~~~${default}        |"
  hr
-  echo -e "| Flashing a Smoothie based board with this script will |"
-  echo -e "| certainly fail. This applies to boards like the BTT   |"
-  echo -e "| SKR V1.3 or SKR V1.4(Turbo). You have to copy the     |"
-  echo -e "| firmware file to the microSD card manually and rename |"
-  echo -e "| it to 'firmware.bin'.                                 |"
+  echo -e "| Flashing a Smoothie based board with this method will |"
+  echo -e "| certainly fail. This applies to boards like the SKR   |"
+  echo -e "| V1.3 / V1.4. You have to copy the firmware file to    |"
+  echo -e "| the SD card manually and rename it to 'firmware.bin'. |"
  hr
  echo -e "| You can find the file in: ~/klipper/out/klipper.bin   |"
  bottom_border
@@ -254,10 +190,12 @@ flash_routine(){
    case "$yn" in
      Y|y|Yes|yes|"")
        echo -e "###### > Yes"
+        FLASH_FIRMWARE="true"
        get_mcu_id
        break;;
      N|n|No|no)
        echo -e "###### > No"
+        FLASH_FIRMWARE="false"
        break;;
      *)
        print_unkown_cmd
@@ -266,7 +204,36 @@ flash_routine(){
  done
 }

-flash_mcu(){
+flash_routine_sd(){
+  echo
+  top_border
+  echo -e "|        ${red}~~~~~~~~~~~ [ ATTENTION! ] ~~~~~~~~~~~~${default}        |"
+  hr
+  echo -e "| If you have a Smoothie based board with an already    |"
+  echo -e "| flashed Klipper Firmware, you can now choose to flash |"
+  echo -e "| directly from the internal SD if your control board   |"
+  echo -e "| is supported by that function.                        |"
+  bottom_border
+  while true; do
+    read -p "${cyan}###### Do you want to continue? (Y/n):${default} " yn
+    case "$yn" in
+      Y|y|Yes|yes|"")
+        echo -e "###### > Yes"
+        FLASH_FW_SD="true"
+        get_mcu_id
+        break;;
+      N|n|No|no)
+        echo -e "###### > No"
+        FLASH_FW_SD="false"
+        break;;
+      *)
+        print_unkown_cmd
+        print_msg && clear_msg;;
+    esac
+  done
+}
+
+select_mcu_id(){
  if [ ${#mcu_list[@]} -ge 1 ]; then
    top_border
    echo -e "|               ${red}!!! IMPORTANT WARNING !!!${default}               |"
@@ -288,23 +255,22 @@ flash_mcu(){
    done
    while true; do
      echo
-      read -p "${cyan}###### Please select the ID for flashing:${default} " selected_id
-      mcu_index=$(echo $((selected_id - 1)))
-      echo -e "\nYou have selected to flash:\n● MCU #$selected_id: ${mcu_list[$mcu_index]}\n"
+      read -p "${cyan}###### Please select the ID for flashing:${default} " selected_index
+      mcu_index=$(echo $((selected_index - 1)))
+      selected_mcu_id="${mcu_list[$mcu_index]}"
+      echo -e "\nYou have selected to flash:\n● MCU #$selected_index: $selected_mcu_id\n"
      while true; do
        read -p "${cyan}###### Do you want to continue? (Y/n):${default} " yn
        case "$yn" in
          Y|y|Yes|yes|"")
            echo -e "###### > Yes"
-            status_msg "Flashing ${mcu_list[$mcu_index]} ..."
-              klipper_service "stop"
-              if ! make flash FLASH_DEVICE="${mcu_list[$mcu_index]}" ; then
-                warn_msg "Flashing failed!"
-                warn_msg "Please read the console output above!"
-              else
-                ok_msg "Flashing successfull!"
-              fi
-              klipper_service "start"
+            status_msg "Flashing $selected_mcu_id ..."
+            if [ "$FLASH_FIRMWARE" = "true" ]; then
+              flash_mcu
+            fi
+            if [ "$FLASH_FW_SD" = "true" ]; then
+              flash_mcu_sd
+            fi
            break;;
          N|n|No|no)
            echo -e "###### > No"
@@ -319,13 +285,94 @@ flash_mcu(){
  fi
 }

+flash_mcu(){
+  klipper_service "stop"
+  if ! make flash FLASH_DEVICE="${mcu_list[$mcu_index]}" ; then
+    warn_msg "Flashing failed!"
+    warn_msg "Please read the console output above!"
+  else
+    ok_msg "Flashing successfull!"
+  fi
+  klipper_service "start"
+}
+
+flash_mcu_sd(){
+  klipper_service "stop"
+
+  ### write each supported board to the array to make it selectable
+  board_list=()
+  for board in $(~/klipper/scripts/flash-sdcard.sh -l | tail -n +2); do
+    board_list+=($board)
+  done
+
+  i=0
+  top_border
+  echo -e "|  Please select the type of board that corresponds to  |"
+  echo -e "|  the currently selected MCU ID you chose before.      |"
+  blank_line
+  echo -e "|  The following boards are currently supported:        |"
+  hr
+  ### display all supported boards to the user
+  for board in ${board_list[@]}; do
+    if [ $i -lt 10 ]; then
+      printf "|  $i) %-50s|\n" "${board_list[$i]}"
+    else
+      printf "|  $i) %-49s|\n" "${board_list[$i]}"
+    fi
+    i=$((i + 1))
+  done
+  quit_footer
+
+  ### make the user select one of the boards
+  while true; do
+    read -p "${cyan}###### Please select board type:${default} " choice
+    if [ $choice = "q" ] || [ $choice = "Q" ]; then
+      clear && advanced_menu && break
+    elif [ $choice -le ${#board_list[@]} ]; then
+      selected_board="${board_list[$choice]}"
+      break
+    else
+      clear && print_header
+      ERROR_MSG="Invalid choice!" && print_msg && clear_msg
+      flash_mcu_sd
+    fi
+  done
+
+  while true; do
+    top_border
+    echo -e "| If your board is flashed with firmware that connects  |"
+    echo -e "| at a custom baud rate, please change it now.          |"
+    blank_line
+    echo -e "| If you are unsure, stick to the default 250000!       |"
+    bottom_border
+    echo -e "${cyan}###### Please set the baud rate:${default} "
+    unset baud_rate
+    while [[ ! $baud_rate =~ ^[0-9]+$ ]]; do
+      read -e -i "250000" -e baud_rate
+      selected_baud_rate=$baud_rate
+      break
+    done
+  break
+  done
+
+  if ! ${HOME}/klipper/scripts/flash-sdcard.sh -b "$selected_baud_rate" "$selected_mcu_id" "$selected_board" ; then
+    warn_msg "Flashing failed!"
+    warn_msg "Please read the console output above!"
+  else
+    ok_msg "Flashing successfull!"
+  fi
+
+  klipper_service "start"
+}
+
 build_fw(){
  if [ -d $KLIPPER_DIR ]; then
    cd $KLIPPER_DIR
-    status_msg "Initializing firmware Setup ..."
+    status_msg "Initializing firmware build ..."
+    make clean
    make menuconfig
    status_msg "Building firmware ..."
-    make clean && make && ok_msg "Firmware built!"
+    make && ok_msg "Firmware built!"
  else
    warn_msg "Can not build firmware without a Klipper directory!"
  fi
@@ -340,7 +387,7 @@ get_mcu_id(){
  bottom_border
  while true; do
    echo -e "${cyan}"
-    read -p "###### Press any key to continue ... " yn
+    read -p "###### Press ENTER to continue ... " yn
    echo -e "${default}"
    case "$yn" in
      *)
@@ -368,4 +415,4 @@ get_mcu_id(){
    warn_msg "Could not retrieve ID!"
    warn_msg "Printer not plugged in or not detectable!"
  fi
-}
+}
--- a/scripts/install_klipper_webui.sh
+++ b/scripts/install_klipper_webui.sh
@@ -7,6 +7,30 @@ check_moonraker(){
  fi
 }

+get_user_selection_mjpg-streamer(){
+  while true; do
+    unset INSTALL_MJPG
+    echo
+    top_border
+    echo -e "|  Install MJGP-Streamer for webcam support?            |"
+    bottom_border
+    read -p "${cyan}###### Install MJPG-Streamer? (Y/n):${default} " yn
+    case "$yn" in
+      Y|y|Yes|yes|"")
+        echo -e "###### > Yes"
+        INSTALL_MJPG="true"
+        break;;
+      N|n|No|no)
+        echo -e "###### > No"
+        INSTALL_MJPG="false"
+        break;;
+      *)
+        print_unkown_cmd
+        print_msg && clear_msg;;
+    esac
+  done
+}
+
 get_user_selection_kiauh_macros(){
  #ask user for webui default macros
  while true; do
@@ -67,17 +91,47 @@ install_webui(){
  ### check if another site already listens to port 80
  $1_port_check

+  ### ask user to install mjpg-streamer
+  get_user_selection_mjpg-streamer
+
  ### ask user to install the recommended webinterface macros
  get_user_selection_kiauh_macros "$IF_NAME2"

  ### creating the mainsail/fluidd nginx cfg
  set_nginx_cfg "$1"

+  ### symlink nginx log
+  symlink_webui_nginx_log "$1"
+
  ### copy the kiauh_macros.cfg to the config location
  install_kiauh_macros

  ### install mainsail/fluidd
  $1_setup
+
+  ### install mjpg-streamer
+  [ "$INSTALL_MJPG" = "true" ] && install_mjpg-streamer
+
+  ### confirm message
+  CONFIRM_MSG="$IF_NAME1 has been set up!"
+  print_msg && clear_msg
+}
+
+symlink_webui_nginx_log(){
+  LPATH="${HOME}/klipper_logs"
+  UI_ACCESS_LOG="/var/log/nginx/$1-access.log"
+  UI_ERROR_LOG="/var/log/nginx/$1-error.log"
+  [ ! -d "$LPATH" ] && mkdir -p "$LPATH"
+  if [ -f "$UI_ACCESS_LOG" ] &&  [ ! -L "$LPATH/$1-access.log" ]; then
+    status_msg "Creating symlink for $UI_ACCESS_LOG ..."
+    ln -s $UI_ACCESS_LOG "$LPATH"
+    ok_msg "OK!"
+  fi
+  if [ -f "$UI_ERROR_LOG" ] &&  [ ! -L "$LPATH/$1-error.log" ]; then
+    status_msg "Creating symlink for $UI_ERROR_LOG ..."
+    ln -s $UI_ERROR_LOG "$LPATH"
+    ok_msg "OK!"
+  fi
 }

 install_kiauh_macros(){
@@ -87,24 +141,26 @@ install_kiauh_macros(){
    ### create a backup of the config folder
    backup_klipper_config_dir
    ### handle multi printer.cfg
-    if ls $klipper_cfg_loc/printer_*  2>/dev/null 1>&2; then
+    if ls $klipper_cfg_loc/printer_* 2>/dev/null 1>&2; then
      for config in $(find $klipper_cfg_loc/printer_*/printer.cfg); do
        path=$(echo $config | rev | cut -d"/" -f2- | rev)
        if [ ! -f $path/kiauh_macros.cfg ]; then
          ### copy kiauh_macros.cfg to config location
+          status_msg "Creating macro config file ..."
          cp ${SRCDIR}/kiauh/resources/kiauh_macros.cfg $path
-          ok_msg "$path/kiauh_macros.cfg created!"
          ### write the include to the very first line of the printer.cfg
          sed -i "1 i [include kiauh_macros.cfg]" $path/printer.cfg
+          ok_msg "$path/kiauh_macros.cfg created!"
        fi
      done
    ### handle single printer.cfg
    elif [ -f $klipper_cfg_loc/printer.cfg ] && [ ! -f $klipper_cfg_loc/kiauh_macros.cfg ]; then
      ### copy kiauh_macros.cfg to config location
+      status_msg "Creating macro config file ..."
      cp ${SRCDIR}/kiauh/resources/kiauh_macros.cfg $klipper_cfg_loc
-      ok_msg "$klipper_cfg_loc/kiauh_macros.cfg created!"
      ### write the include to the very first line of the printer.cfg
      sed -i "1 i [include kiauh_macros.cfg]" $klipper_cfg_loc/printer.cfg
+      ok_msg "$klipper_cfg_loc/kiauh_macros.cfg created!"
    fi
    ### restart klipper service to parse the modified printer.cfg
    klipper_service "restart"
@@ -247,8 +303,6 @@ mainsail_setup(){
  if [ $(ls /etc/systemd/system/moonraker* | wc -l) -gt 1 ]; then
    enable_mainsail_remotemode
  fi
-
-  ok_msg "Mainsail installation complete!\n"
 }

 enable_mainsail_remotemode(){
@@ -272,6 +326,5 @@ fluidd_setup(){

  ### delete downloaded zip
  status_msg "Remove downloaded archive ..."
-  rm -rf *.zip && ok_msg "Done!" && ok_msg "Fluidd installation complete!"
-  echo
+  rm -rf *.zip && ok_msg "Done!"
 }
--- a/scripts/install_klipperscreen.sh
+++ b/scripts/install_klipperscreen.sh
@@ -2,13 +2,8 @@ install_klipperscreen(){
  python3_check
  if [ $py_chk_ok = "true" ]; then
    source_kiauh_ini
-    system_check_klipperscreen
-    #ask user for customization
-    get_user_selections_klipperscreen
    #KlipperScreen main installation
    klipperscreen_setup
-    #execute customizations
-    symlinks_klipperscreen
    #after install actions
    restart_klipperscreen
  else
@@ -29,57 +24,16 @@ python3_check(){
  fi
 }

-system_check_klipperscreen(){
-  source_kiauh_ini
-  if [ ! -e $klipper_cfg_loc/KlipperScreen.log ]; then
-    KLIPPERSCREEN_SL_FOUND="false"
-  else
-    KLIPPERSCREEN_SL_FOUND="true"
-  fi
-}
-
-get_user_selections_klipperscreen(){
-  #user selection for KlipperScreen.log symlink
-  if [ "$KLIPPERSCREEN_SL_FOUND" = "false" ]; then
-    while true; do
-      echo
-      read -p "${cyan}###### Create KlipperScreen.log symlink? (y/N):${default} " yn
-      case "$yn" in
-        Y|y|Yes|yes)
-          echo -e "###### > Yes"
-          SEL_KSLOG_SL="true"
-          break;;
-        N|n|No|no|"")
-          echo -e "###### > No"
-          SEL_KSLOG_SL="false"
-          break;;
-        *)
-          print_unkown_cmd
-          print_msg && clear_msg;;
-      esac
-    done
-  fi
-}
-
 klipperscreen_setup(){
  dep=(wget curl unzip dfu-util)
  dependency_check
  status_msg "Downloading KlipperScreen ..."
-  #force remove existing KlipperScreen dir
+  # force remove existing KlipperScreen dir
  [ -d $KLIPPERSCREEN_DIR ] && rm -rf $KLIPPERSCREEN_DIR
-  #clone into fresh KlipperScreen dir
+  # clone into fresh KlipperScreen dir
  cd ${HOME} && git clone $KLIPPERSCREEN_REPO
  ok_msg "Download complete!"
  status_msg "Installing KlipperScreen ..."
  $KLIPPERSCREEN_DIR/scripts/KlipperScreen-install.sh
-  echo; ok_msg "KlipperScreen successfully installed!"
-}
-
-symlinks_klipperscreen(){
-  #create a KlipperScreen.log symlink in klipper_config-dir just for convenience
-  if [ "$SEL_KSLOG_SL" = "true" ] && [ ! -e $klipper_cfg_loc/KlipperScreen.log ]; then
-    status_msg "Creating KlipperScreen.log symlink ..."
-    ln -s /tmp/KlipperScreen.log $klipper_cfg_loc
-    ok_msg "Symlink created!"
-  fi
+  ok_msg "KlipperScreen successfully installed!"
 }
--- a/scripts/install_mjpg-streamer.sh
+++ b/scripts/install_mjpg-streamer.sh
@@ -0,0 +1,93 @@
+### base variables
+SYSTEMDDIR="/etc/systemd/system"
+WEBCAMD_SRC="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/mjpgstreamer/filesystem/root/usr/local/bin/webcamd"
+WEBCAM_TXT_SRC="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/mjpgstreamer/filesystem/home/pi/klipper_config/webcam.txt"
+
+install_mjpg-streamer(){
+  ### checking dependencies
+  check_klipper_cfg_path
+
+  ### set default values
+  MJPG_SERV_SRC="${SRCDIR}/kiauh/resources/webcamd.service"
+  MJPG_SERV_TARGET="$SYSTEMDDIR/webcamd.service"
+  WEBCAM_TXT="$klipper_cfg_loc/webcam.txt"
+
+  ### if there is a webcamd.service -> exit
+  if [ -f $MJPG_SERV_TARGET ]; then
+    ERROR_MSG="Looks like MJPG-streamer is already installed!\n Please remove it first before you try to re-install it!"
+    print_msg && clear_msg && return 0
+  fi
+
+  ### check and install dependencies if missing
+  dep=(build-essential git imagemagick libv4l-dev libjpeg-dev libjpeg62-turbo-dev cmake)
+  dependency_check
+
+  ### step 1: clone moonraker
+  status_msg "Downloading MJPG-Streamer ..."
+  cd ${HOME} && git clone https://github.com/jacksonliam/mjpg-streamer.git
+  ok_msg "Download complete!"
+
+  ### step 2: compiling mjpg-streamer
+  status_msg "Compiling MJPG-Streamer ..."
+  cd ${HOME}/mjpg-streamer/mjpg-streamer-experimental && make
+  ok_msg "Compiling complete!"
+
+  #step 3: install mjpg-streamer
+  status_msg "Installing MJPG-Streamer ..."
+  cd ${HOME}/mjpg-streamer && mv mjpg-streamer-experimental/* .
+  mkdir www-mjpgstreamer
+  cat <<EOT >> ./www-mjpgstreamer/index.html
+<html>
+<head><title>mjpg_streamer test page</title></head>
+<body>
+<h1>Snapshot</h1>
+<p>Refresh the page to refresh the snapshot</p>
+<img src="./?action=snapshot" alt="Snapshot">
+<h1>Stream</h1>
+<img src="./?action=stream" alt="Stream">
+</body>
+</html>
+EOT
+  sudo wget $WEBCAMD_SRC -O "/usr/local/bin/webcamd"
+  sudo sed -i "/^config_dir=/ s|=.*|=$klipper_cfg_loc|" /usr/local/bin/webcamd
+  sudo sed -i "/MJPGSTREAMER_HOME/ s/pi/${USER}/" /usr/local/bin/webcamd
+  sudo chmod +x /usr/local/bin/webcamd
+
+  ### step 4: create webcam.txt config file
+  [ ! -d $klipper_cfg_loc ] && mkdir -p $klipper_cfg_loc
+  if [ ! -f $WEBCAM_TXT ]; then
+    status_msg "Creating webcam.txt config file ..."
+    wget $WEBCAM_TXT_SRC -O $WEBCAM_TXT
+    ok_msg "Done!"
+  fi
+
+  ### step 5: create systemd service
+  status_msg "Creating MJPG-Streamer service ..."
+  sudo cp $MJPG_SERV_SRC $MJPG_SERV_TARGET
+  sudo sed -i "s|%USER%|${USER}|" $MJPG_SERV_TARGET
+  ok_msg "MJPG-Streamer service created!"
+
+  ### step 6: enabling and starting mjpg-streamer service
+  status_msg "Starting MJPG-Streamer service ..."
+  sudo systemctl enable webcamd.service
+  sudo systemctl start webcamd.service
+  ok_msg "MJPG-Streamer service started!"
+
+  ### step 6.1: create webcamd.log symlink
+  [ ! -d ${HOME}/klipper_logs ] && mkdir -p "${HOME}/klipper_logs"
+  if [ -f "/var/log/webcamd.log" ] && [ ! -L "${HOME}/klipper_logs/webcamd.log" ]; then
+    ln -s "/var/log/webcamd.log" "${HOME}/klipper_logs/webcamd.log"
+  fi
+
+  ### confirm message
+  CONFIRM_MSG="MJPG-Streamer has been set up!"
+  print_msg && clear_msg
+
+  ### print webcam ip adress/url
+  IP=$(hostname -I | cut -d" " -f1)
+  WEBCAM_IP="http://$IP:8080/?action=stream"
+  WEBCAM_URL="http://$IP/webcam/?action=stream"
+  echo -e " ${cyan}● Webcam URL:${default} $WEBCAM_IP"
+  echo -e " ${cyan}● Webcam URL:${default} $WEBCAM_URL"
+  echo
+}
--- a/scripts/install_moonraker.sh
+++ b/scripts/install_moonraker.sh
@@ -2,6 +2,7 @@
 SYSTEMDDIR="/etc/systemd/system"
 MOONRAKER_ENV="${HOME}/moonraker-env"
 MOONRAKER_DIR="${HOME}/moonraker"
+MOONRAKER_REPO="https://github.com/Arksine/moonraker.git"

 system_check_moonraker(){
  ### python 3 check
@@ -45,15 +46,19 @@ moonraker_setup_dialog(){
    print_msg && clear_msg && return 0
  fi

+  shopt -s extglob # enable extended globbing
  ### check for existing moonraker service installations
-  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "moonraker.service")" ] || [ "$(systemctl list-units --full -all -t service --no-legend | grep -E "moonraker-[[:digit:]].service")" ]; then
+  FILE="$SYSTEMDDIR/moonraker?(-*([0-9])).service"
+  if ls $FILE 2>/dev/null 1>&2; then
    ERROR_MSG="At least one Moonraker service is already installed!" && return 0
  fi

  ### check for existing klipper service installations
-  if [ ! "$(systemctl list-units --full -all -t service --no-legend | grep -F "klipper.service")" ] && [ ! "$(systemctl list-units --full -all -t service --no-legend | grep -E "klipper-[[:digit:]].service")" ]; then
+  FILE="$SYSTEMDDIR/klipper?(-*([0-9])).service"
+  if ! ls $FILE 2>/dev/null 1>&2; then
    ERROR_MSG="Klipper service not found, please install Klipper first!" && return 0
  fi
+  shopt -u extglob # disable extended globbing

  ### count amount of klipper services
  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "klipper.service")" ]; then
@@ -101,10 +106,6 @@ moonraker_setup_dialog(){
 }

 moonraker_setup(){
-  ### get printer config directory
-  source_kiauh_ini
-  MOONRAKER_CONF_LOC="$klipper_cfg_loc"
-
  ### checking dependencies
  dep=(wget curl unzip dfu-util)
  ### additional deps for kiauh compatibility for armbian
@@ -124,8 +125,7 @@ moonraker_setup(){
  create_moonraker_virtualenv

  ### step 3: create moonraker.conf folder and moonraker.confs
-  [ ! -d $MOONRAKER_CONF_LOC ] && mkdir -p $MOONRAKER_CONF_LOC
-  moonraker_conf_creation
+  create_moonraker_conf

  ### step 4: set up moonrakers nginx configs
  setup_moonraker_nginx_cfg
@@ -133,25 +133,27 @@ moonraker_setup(){
  ### step 5: process possible disruptive services
  process_haproxy_lighttpd_services

-  ### step 6: create final moonraker instances
-  INSTANCE=1
-  if [ $INSTANCE_COUNT -eq $INSTANCE ]; then
-    create_single_moonraker_instance
-  else
-    create_multi_moonraker_instance
-    ### step 6.5: enable mainsails remoteMode if its already installed
-    if [ -d $MAINSAIL_DIR ]; then
-      enable_mainsail_remotemode
-    fi
-  fi
+  # ### step 6: create final moonraker instances
+  create_moonraker_service
+
+  ### confirm message
+  CONFIRM_MSG="$INSTANCE_COUNT Moonraker instances have been set up!"
+  [ $INSTANCE_COUNT -eq 1 ] && CONFIRM_MSG="Moonraker has been set up!"
+  print_msg && clear_msg
+
+  ### display moonraker ips to the user
+  print_mr_ip_list; echo
 }

-##############################################################################################
-#********************************************************************************************#
-##############################################################################################
-
 install_moonraker_packages(){
-  PKGLIST="python3-virtualenv python3-dev nginx libopenjp2-7 python3-libgpiod"
+  ### read PKGLIST from official install script
+  status_msg "Reading dependencies..."
+  install_script="${HOME}/moonraker/scripts/install-moonraker.sh"
+  PKGLIST=$(grep "PKGLIST=" $install_script | sed 's/PKGLIST//g; s/[$={}\n"]//g')
+  ### rewrite packages into new array
+  unset PKGARR
+  for PKG in $PKGLIST; do PKGARR+=($PKG); done
+  echo "${cyan}${PKGARR[@]}${default}"

  ### Update system package info
  status_msg "Running apt-get update..."
@@ -159,7 +161,7 @@ install_moonraker_packages(){

  ### Install desired packages
  status_msg "Installing packages..."
-  sudo apt-get install --yes ${PKGLIST}
+  sudo apt-get install --yes ${PKGARR[@]}
 }

 create_moonraker_virtualenv(){
@@ -171,157 +173,144 @@ create_moonraker_virtualenv(){
    rm -rf ${MOONRAKER_ENV}
  fi

-  [ ! -d ${MOONRAKER_ENV} ] && virtualenv -p /usr/bin/python3 --system-site-packages ${MOONRAKER_ENV}
+  if [ ! -d ${MOONRAKER_ENV} ]; then
+    virtualenv -p /usr/bin/python3 ${MOONRAKER_ENV}
+    ln -s /usr/lib/python3/dist-packages/gpiod* ${MOONRAKER_ENV}/lib/python*/site-packages
+  fi

  ### Install/update dependencies
  ${MOONRAKER_ENV}/bin/pip install -r ${MOONRAKER_DIR}/scripts/moonraker-requirements.txt
 }

-create_single_moonraker_startscript(){
-### create systemd service file
-sudo /bin/sh -c "cat > ${SYSTEMDDIR}/moonraker.service" << EOF
-#Systemd service file for moonraker
-[Unit]
-Description=Starts Moonraker on startup
-After=network.target
-[Install]
-WantedBy=multi-user.target
-[Service]
-Type=simple
-User=${USER}
-RemainAfterExit=yes
-ExecStart=${MOONRAKER_ENV}/bin/python ${MOONRAKER_DIR}/moonraker/moonraker.py -l ${MOONRAKER_LOG} -c ${MOONRAKER_CONF}
-Restart=always
-RestartSec=10
-EOF
+create_moonraker_service(){
+  ### get config directory
+  source_kiauh_ini
+
+  ### set up default values
+  SINGLE_INST=1
+  CFG_PATH="$klipper_cfg_loc"
+  MR_ENV=$MOONRAKER_ENV
+  MR_DIR=$MOONRAKER_DIR
+  MR_LOG="${HOME}/klipper_logs/moonraker.log"
+  MR_CONF="$CFG_PATH/moonraker.conf"
+  MR_SERV_SRC="${SRCDIR}/kiauh/resources/moonraker.service"
+  MR_SERV_TARGET="$SYSTEMDDIR/moonraker.service"
+
+  write_mr_service(){
+    if [ ! -f $MR_SERV_TARGET ]; then
+      status_msg "Creating Moonraker Service $i ..."
+        sudo cp $MR_SERV_SRC $MR_SERV_TARGET
+        sudo sed -i "s|%INST%|$i|" $MR_SERV_TARGET
+        sudo sed -i "s|%USER%|${USER}|" $MR_SERV_TARGET
+        sudo sed -i "s|%MR_ENV%|$MR_ENV|" $MR_SERV_TARGET
+        sudo sed -i "s|%MR_DIR%|$MR_DIR|" $MR_SERV_TARGET
+        sudo sed -i "s|%MR_LOG%|$MR_LOG|" $MR_SERV_TARGET
+        sudo sed -i "s|%MR_CONF%|$MR_CONF|" $MR_SERV_TARGET
+    fi
+  }
+
+  if [ $SINGLE_INST -eq $INSTANCE_COUNT ]; then
+    ### write single instance service
+    write_mr_service
+    ### enable instance
+    sudo systemctl enable moonraker.service
+    ok_msg "Single Moonraker instance created!"
+    ### launching instance
+    status_msg "Launching Moonraker instance ..."
+    sudo systemctl start moonraker
+  else
+    i=1
+    while [ $i -le $INSTANCE_COUNT ]; do
+      ### rewrite default variables for multi instance cases
+      CFG_PATH="$klipper_cfg_loc/printer_$i"
+      MR_SERV_TARGET="$SYSTEMDDIR/moonraker-$i.service"
+      MR_CONF="$CFG_PATH/moonraker.conf"
+      MR_LOG="${HOME}/klipper_logs/moonraker-$i.log"
+      ### write multi instance service
+      write_mr_service
+      ### enable instance
+      sudo systemctl enable moonraker-$i.service
+      ok_msg "Moonraker instance #$i created!"
+      ### launching instance
+      status_msg "Launching Moonraker instance #$i ..."
+      sudo systemctl start moonraker-$i
+
+      ### raise values by 1
+      i=$((i+1))
+    done
+    unset i
+
+    ### enable mainsails remoteMode if mainsail is found
+    if [ -d $MAINSAIL_DIR ]; then
+      status_msg "Mainsail installation found!"
+      status_msg "Enabling Mainsail remoteMode ..."
+      enable_mainsail_remotemode
+      ok_msg "Mainsails remoteMode enabled!"
+    fi
+  fi
 }

-create_multi_moonraker_startscript(){
-### create multi instance systemd service file
-sudo /bin/sh -c "cat > ${SYSTEMDDIR}/moonraker-$INSTANCE.service" << EOF
-#Systemd service file for moonraker
-[Unit]
-Description=Starts Moonraker instance $INSTANCE on startup
-After=network.target
-[Install]
-WantedBy=multi-user.target
-[Service]
-Type=simple
-User=${USER}
-RemainAfterExit=yes
-ExecStart=${MOONRAKER_ENV}/bin/python ${MOONRAKER_DIR}/moonraker/moonraker.py -l ${MOONRAKER_LOG} -c ${MOONRAKER_CONF}
-Restart=always
-RestartSec=10
-EOF
+create_moonraker_conf(){
+  ### get config directory
+  source_kiauh_ini
+
+  ### set up default values
+  SINGLE_INST=1
+  PORT=7125
+  CFG_PATH="$klipper_cfg_loc"
+  LOG_PATH="${HOME}/klipper_logs"
+  MR_CONF="$CFG_PATH/moonraker.conf"
+  MR_DB="~/.moonraker_database"
+  KLIPPY_UDS="/tmp/klippy_uds"
+  MR_CONF_SRC="${SRCDIR}/kiauh/resources/moonraker.conf"
+  mr_ip_list=()
+  IP=$(hostname -I | cut -d" " -f1)
+  LAN="$(hostname -I | cut -d" " -f1 | cut -d"." -f1-2).0.0/16"
+
+  write_mr_conf(){
+    [ ! -d $CFG_PATH ] && mkdir -p $CFG_PATH
+    if [ ! -f $MR_CONF ]; then
+      status_msg "Creating moonraker.conf in $CFG_PATH ..."
+        cp $MR_CONF_SRC $MR_CONF
+        sed -i "s|%PORT%|$PORT|" $MR_CONF
+        sed -i "s|%CFG%|$CFG_PATH|" $MR_CONF
+        sed -i "s|%LOG%|$LOG_PATH|" $MR_CONF
+        sed -i "s|%MR_DB%|$MR_DB|" $MR_CONF
+        sed -i "s|%UDS%|$KLIPPY_UDS|" $MR_CONF
+        sed -i "s|%LAN%|$LAN|" $MR_CONF
+        sed -i "s|%USER%|${USER}|g" $MR_CONF
+      ok_msg "moonraker.conf created!"
+    else
+      warn_msg "There is already a file called 'moonraker.conf'!"
+      warn_msg "Skipping..."
+    fi
+  }
+
+  if [ $SINGLE_INST -eq $INSTANCE_COUNT ]; then
+    ### write single instance config
+    write_mr_conf
+    mr_ip_list+=("$IP:$PORT")
+  else
+    i=1
+    while [ $i -le $INSTANCE_COUNT ]; do
+      ### rewrite default variables for multi instance cases
+      CFG_PATH="$klipper_cfg_loc/printer_$i"
+      MR_CONF="$CFG_PATH/moonraker.conf"
+      MR_DB="~/.moonraker_database_$i"
+      KLIPPY_UDS="/tmp/klippy_uds-$i"
+
+      ### write multi instance config
+      write_mr_conf
+      mr_ip_list+=("$IP:$PORT")
+
+      ### raise values by 1
+      PORT=$((PORT+1))
+      i=$((i+1))
+    done
+    unset PORT && unset i
+  fi
 }

-create_single_moonraker_conf(){
-  HOSTNAME=$(hostname -I | cut -d" " -f1)
-  LOCAL_NETWORK="$(hostname -I | cut -d" " -f1 | cut -d"." -f1-2).0.0/16"
-
-  /bin/sh -c "cat > $MOONRAKER_CONF_LOC/moonraker.conf" << MOONRAKERCONF
-[server]
-host: 0.0.0.0
-port: $PORT
-enable_debug_logging: True
-config_path: $PRINTER_CFG_LOC
-klippy_uds_address: /tmp/klippy_uds
-
-[authorization]
-enabled: True
-api_key_file: ~/.moonraker_api_key
-trusted_clients:
-    127.0.0.1
-    $LOCAL_NETWORK
-    ::1/128
-    FE80::/10
-cors_domains:
-    http://*.local
-    http://my.mainsail.xyz
-    https://my.mainsail.xyz
-    http://app.fluidd.xyz
-    https://app.fluidd.xyz
-    http://$HOSTNAME
-    http://$HOSTNAME:*
-
-[update_manager]
-
-[update_manager client mainsail]
-type: web
-repo: meteyou/mainsail
-path: ~/mainsail
-
-[update_manager client fluidd]
-type: web
-repo: cadriel/fluidd
-path: ~/fluidd
-
-#[update_manager client KlipperScreen]
-#type: git_repo
-#path: /home/${HOME}/KlipperScreen
-#origin: https://github.com/jordanruthe/KlipperScreen.git
-#env: /home/${HOME}/.KlipperScreen-env/bin/python
-#requirements: scripts/KlipperScreen-requirements.txt
-#install_script: scripts/KlipperScreen-install.sh
-MOONRAKERCONF
-}
-
-create_multi_moonraker_conf(){
-  HOSTNAME=$(hostname -I | cut -d" " -f1)
-  LOCAL_NETWORK="$(hostname -I | cut -d" " -f1 | cut -d"." -f1-2).0.0/16"
-
-  /bin/sh -c "cat > $MOONRAKER_CONF_LOC/printer_$INSTANCE/moonraker.conf" << MOONRAKERCONF
-[server]
-host: 0.0.0.0
-port: $PORT
-enable_debug_logging: True
-config_path: $PRINTER_CFG_LOC/printer_$INSTANCE
-klippy_uds_address: /tmp/klippy_uds-$INSTANCE
-
-[authorization]
-enabled: True
-api_key_file: ~/.moonraker_api_key
-trusted_clients:
-    127.0.0.1
-    $LOCAL_NETWORK
-    ::1/128
-    FE80::/10
-cors_domains:
-    http://*.local
-    https://*.local
-    http://my.mainsail.xyz
-    https://my.mainsail.xyz
-    http://app.fluidd.xyz
-    https://app.fluidd.xyz
-    http://$HOSTNAME
-    http://$HOSTNAME:*
-
-[update_manager]
-
-[update_manager client mainsail]
-type: web
-repo: meteyou/mainsail
-path: ~/mainsail
-
-[update_manager client fluidd]
-type: web
-repo: cadriel/fluidd
-path: ~/fluidd
-
-#[update_manager client KlipperScreen]
-#type: git_repo
-#path: /home/${USER}/KlipperScreen
-#origin: https://github.com/jordanruthe/KlipperScreen.git
-#env: /home/${USER}/.KlipperScreen-env/bin/python
-#requirements: scripts/KlipperScreen-requirements.txt
-#install_script: scripts/KlipperScreen-install.sh
-MOONRAKERCONF
-}
-
-##############################################################################################
-#********************************************************************************************#
-##############################################################################################
-
 print_mr_ip_list(){
  i=1
  for ip in ${mr_ip_list[@]}; do
@@ -330,64 +319,6 @@ print_mr_ip_list(){
  done
 }

-create_single_moonraker_instance(){
-  status_msg "Setting up 1 Moonraker instance ..."
-
-  ### single instance variables
-  MOONRAKER_LOG=/tmp/moonraker.log
-  MOONRAKER_CONF="$MOONRAKER_CONF_LOC/moonraker.conf"
-
-  ### create instance
-  status_msg "Creating single Moonraker instance ..."
-  create_single_moonraker_startscript
-
-  ### enable instance
-  sudo systemctl enable moonraker.service
-  ok_msg "Single Moonraker instance created!"
-
-  ### launching instance
-  status_msg "Launching Moonraker instance ..."
-  sudo systemctl start moonraker
-
-  ### confirm message
-  CONFIRM_MSG="Single Moonraker instance has been set up!"
-  print_msg && clear_msg
-
-  ### display moonraker ip to the user
-  print_mr_ip_list; echo
-}
-
-create_multi_moonraker_instance(){
-  status_msg "Setting up $INSTANCE_COUNT instances of Moonraker ..."
-  while [ $INSTANCE -le $INSTANCE_COUNT ]; do
-    ### multi instance variables
-    MOONRAKER_LOG=/tmp/moonraker-$INSTANCE.log
-    MOONRAKER_CONF="$MOONRAKER_CONF_LOC/printer_$INSTANCE/moonraker.conf"
-
-    ### create instance
-    status_msg "Creating instance #$INSTANCE ..."
-    create_multi_moonraker_startscript
-
-    ### enable instance
-    sudo systemctl enable moonraker-$INSTANCE.service
-    ok_msg "Moonraker instance $INSTANCE created!"
-
-    ### launching instance
-    status_msg "Launching Moonraker instance $INSTANCE ..."
-    sudo systemctl start moonraker-$INSTANCE
-
-    ### instance counter +1
-    INSTANCE=$(expr $INSTANCE + 1)
-  done
-
-  ### confirm message
-  CONFIRM_MSG="$INSTANCE_COUNT Moonraker instances have been set up!"
-  print_msg && clear_msg
-
-  ### display all moonraker ips to the user
-  print_mr_ip_list; echo
-}
-
 setup_moonraker_nginx_cfg(){
  get_date

@@ -404,68 +335,6 @@ setup_moonraker_nginx_cfg(){
  fi
 }

-moonraker_conf_creation(){
-  ### default moonraker port
-  DEFAULT_PORT=7125
-
-  ### get printer and moonraker config directory
-  source_kiauh_ini
-  PRINTER_CFG_LOC="$klipper_cfg_loc"
-  MOONRAKER_CONF_LOC="$klipper_cfg_loc"
-
-  ### reset instances back to 1 again
-  INSTANCE=1
-
-  ### declare empty array for ips which get displayed to the user at the end of the setup
-  HOSTNAME=$(hostname -I | cut -d" " -f1)
-  mr_ip_list=()
-
-  ### create single instance moonraker.conf file
-  if [ $INSTANCE_COUNT -eq $INSTANCE ]; then
-    ### set port
-    PORT=$DEFAULT_PORT
-
-    ### write the ip and port to the ip list for displaying it later to the user
-    mr_ip_list+=("$HOSTNAME:$PORT")
-
-    status_msg "Creating moonraker.conf in $MOONRAKER_CONF_LOC"
-    [ ! -d $MOONRAKER_CONF_LOC ] && mkdir -p $MOONRAKER_CONF_LOC
-    if [ ! -f $MOONRAKER_CONF_LOC/moonraker.conf ]; then
-      create_single_moonraker_conf && ok_msg "moonraker.conf created!"
-    else
-      warn_msg "There is already a file called 'moonraker.conf'!"
-      warn_msg "Skipping..."
-    fi
-
-  ### create multi instance moonraker.conf files
-  else
-    while [ $INSTANCE -le $INSTANCE_COUNT ]; do
-      ### set each instance to its own port
-      PORT=$(expr $DEFAULT_PORT + $INSTANCE - 1)
-
-      ### write the ip and port to the ip list for displaying it later to the user
-      mr_ip_list+=("$HOSTNAME:$PORT")
-
-      ### start the creation of each instance
-      status_msg "Creating moonraker.conf for instance #$INSTANCE"
-      [ ! -d $MOONRAKER_CONF_LOC/printer_$INSTANCE ] && mkdir -p $MOONRAKER_CONF_LOC/printer_$INSTANCE
-      if [ ! -f $MOONRAKER_CONF_LOC/printer_$INSTANCE/moonraker.conf ]; then
-        create_multi_moonraker_conf && ok_msg "moonraker.conf created!"
-      else
-        warn_msg "There is already a file called 'moonraker-$INSTANCE.conf'!"
-        warn_msg "Skipping..."
-      fi
-
-      ### raise instance counter by 1
-      INSTANCE=$(expr $INSTANCE + 1)
-    done
-  fi
-}
-
-##############################################################################################
-#********************************************************************************************#
-##############################################################################################
-
 process_octoprint_dialog(){
  #ask user to disable octoprint when its service was found
  if [ "$OCTOPRINT_ENABLED" = "true" ]; then
@@ -595,4 +464,4 @@ process_haproxy_lighttpd_dialog(){
      esac
    done
  fi
-}
+}
--- a/scripts/install_octoprint.sh
+++ b/scripts/install_octoprint.sh
@@ -69,7 +69,7 @@ octoprint_setup(){
  [ ! -d $OCTOPRINT_ENV ] && mkdir -p $OCTOPRINT_ENV
  status_msg "Set up virtualenv ..."
  cd $OCTOPRINT_ENV
-  virtualenv venv
+  virtualenv --python=python3 venv
  source venv/bin/activate

  ### install octoprint with pip
@@ -273,4 +273,4 @@ print_op_ip_list(){
    echo -e "       ${cyan}● Instance $i:${default} $ip"
    i=$((i + 1))
  done
-}
+}
--- a/scripts/ms_theme_installer.sh
+++ b/scripts/ms_theme_installer.sh
@@ -0,0 +1,75 @@
+### base variables
+SYSTEMDDIR="/etc/systemd/system"
+
+check_select_printer(){
+  unset printer_num
+
+  ### get klipper cfg loc and set default .theme folder loc
+  check_klipper_cfg_path
+  THEME_PATH="$klipper_cfg_loc"
+
+  ### check if there is more than one moonraker instance and if yes
+  ### ask the user to select the printer he wants to install/remove the theme
+  printer_count=$(ls /etc/systemd/system/moonraker*.service | wc -l)
+  if [ $printer_count -gt 1 ]; then
+    top_border
+    echo -e "|  More than one printer was found on this system!      | "
+    echo -e "|  Please select the printer to which you want to       | "
+    echo -e "|  apply the previously selected action.                | "
+    bottom_border
+    read -p "${cyan}Select printer:${default} " printer_num
+
+    ### rewrite the .theme path matching the selected printer
+    THEME_PATH="$klipper_cfg_loc/printer_$printer_num"
+  fi
+
+  ### create the cfg folder if there is none yet
+  [ ! -d $THEME_PATH ] && mkdir -p $THEME_PATH
+}
+
+ms_theme_delete(){
+  ### check and select printer if there is more than 1
+  check_select_printer
+
+  ### remove .theme folder
+  if [ -d "$THEME_PATH/.theme" ]; then
+    status_msg "Removing Theme ..."
+    rm -rf "$THEME_PATH/.theme" && ok_msg "Theme removed!\n"
+  else
+    status_msg "No Theme installed!\n"
+  fi
+}
+
+ms_theme_dracula(){
+  THEME_URL="https://github.com/steadyjaw/dracula-mainsail-theme"
+
+  ### check and select printer if there is more than 1
+  check_select_printer
+
+  ### download all files
+  status_msg "Installing Dracula theme ..."
+  status_msg "Please wait ..."
+
+  [ -d "$THEME_PATH/.theme" ] && rm -rf "$THEME_PATH/.theme"
+  cd $THEME_PATH && git clone "$THEME_URL" ".theme"
+
+  ok_msg "Theme installation complete!"
+  ok_msg "Please remember to delete your browser cache!\n"
+}
+
+ms_theme_cyberpunk(){
+  THEME_URL="https://github.com/Dario-Ciceri/cp2077-mainsail-theme"
+
+  ### check and select printer if there is more than 1
+  check_select_printer
+
+  ### download all files
+  status_msg "Installing Cyberpunk theme ..."
+  status_msg "Please wait ..."
+
+  [ -d "$THEME_PATH/.theme" ] && rm -rf "$THEME_PATH/.theme"
+  cd $THEME_PATH && git clone "$THEME_URL" ".theme"
+
+  ok_msg "Theme installation complete!"
+  ok_msg "Please remember to delete your browser cache!\n"
+}
--- a/scripts/remove.sh
+++ b/scripts/remove.sh
@@ -1,7 +1,12 @@
+### base variables
+SYSTEMDDIR="/etc/systemd/system"
+
 remove_klipper(){
+  shopt -s extglob # enable extended globbing
  ### ask the user if he wants to uninstall moonraker too.
  ###? currently usefull if the user wants to switch from single-instance to multi-instance
-  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -E "moonraker*.")" ]; then
+  FILE="$SYSTEMDDIR/moonraker?(-*([0-9])).service"
+  if ls $FILE 2>/dev/null 1>&2; then
    while true; do
      unset REM_MR
      top_border
@@ -32,38 +37,20 @@ remove_klipper(){
  fi

  ### remove "legacy" klipper init.d service
-  if [[ -e /etc/init.d/klipper || -e /etc/default/klipper ]]; then
+  if [ -e /etc/init.d/klipper ]; then
    status_msg "Removing Klipper Service ..."
    sudo systemctl stop klipper
-    sudo systemctl disable klipper
-    sudo rm -rf /etc/init.d/klipper /etc/default/klipper
    sudo update-rc.d -f klipper remove
-    sudo systemctl daemon-reload
+    sudo rm -f /etc/init.d/klipper
+    sudo rm -f /etc/default/klipper
    ok_msg "Klipper Service removed!"
  fi

-  ###remove single instance
-  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "klipper.service")" ]; then
-    status_msg "Removing Klipper Service ..."
-    sudo systemctl stop klipper
-    sudo systemctl disable klipper
-    sudo rm -f $SYSTEMDDIR/klipper.service
-    ok_msg "Klipper Service removed!"
-  fi
-  if [ -f /tmp/klippy.log ]; then
-    status_msg "Removing /tmp/klippy.log ..." && rm -f /tmp/klippy.log && ok_msg "Done!"
-  fi
-  if [ -e /tmp/klippy_uds ]; then
-    status_msg "Removing /tmp/klippy_uds ..." && rm -f /tmp/klippy_uds && ok_msg "Done!"
-  fi
-  if [ -h /tmp/printer ]; then
-    status_msg "Removing /tmp/printer ..." && rm -f /tmp/printer && ok_msg "Done!"
-  fi
-
-  ###remove multi instance services
-  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -E "klipper-[[:digit:]].service")" ]; then
+  ### remove all klipper services
+  FILE="$SYSTEMDDIR/klipper?(-*([0-9])).service"
+  if ls $FILE 2>/dev/null 1>&2; then
    status_msg "Removing Klipper Services ..."
-    for service in $(find $SYSTEMDDIR -maxdepth 1 -name "klipper-*.service" | cut -d"/" -f5)
+    for service in $(ls $FILE | cut -d"/" -f5)
    do
      status_msg "Removing $service ..."
      sudo systemctl stop $service
@@ -71,36 +58,43 @@ remove_klipper(){
      sudo rm -f $SYSTEMDDIR/$service
      ok_msg "Done!"
    done
+    ### reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
+    ok_msg "Klipper Service removed!"
  fi

-  ###remove multi instance logfiles
-  if [ "$(find /tmp -maxdepth 1 -name "klippy-*.log")" ]; then
-    for logfile in $(find /tmp -maxdepth 1 -name "klippy-*.log")
-    do
-      status_msg "Removing $logfile ..." && rm -f $logfile && ok_msg "Done!"
+  ### remove all logfiles
+  FILE="${HOME}/klipper_logs/klippy?(-*([0-9])).log"
+  if ls $FILE 2>/dev/null 1>&2; then
+    for log in $(ls $FILE); do
+      status_msg "Removing $log ..."
+      rm -f $log
+      ok_msg "$log removed!"
    done
  fi

-  ###remove multi instance UDS
-  if [ "$(find /tmp -maxdepth 1 -name "klippy_uds-*")" ]; then
-    for uds in $(find /tmp -maxdepth 1 -name "klippy_uds-*")
-    do
-      status_msg "Removing $uds ..." && rm -f $uds && ok_msg "Done!"
+  ### remove all UDS
+  FILE="/tmp/klippy_uds?(-*([0-9]))"
+  if ls $FILE 2>/dev/null 1>&2; then
+    for uds in $(ls $FILE); do
+      status_msg "Removing $uds ..."
+      rm -f $uds
+      ok_msg "$uds removed!"
    done
  fi

-  ###remove multi instance tmp-printer
-  if [ "$(find /tmp -maxdepth 1 -name "printer-*")" ]; then
-    for tmp_printer in $(find /tmp -maxdepth 1 -name "printer-*")
-    do
-      status_msg "Removing $tmp_printer ..." && rm -f $tmp_printer && ok_msg "Done!"
+  ### remove all tmp-printer
+  FILE="/tmp/printer?(-*([0-9]))"
+  if ls $FILE 2>/dev/null 1>&2; then
+    for tmp_printer in $(ls $FILE); do
+      status_msg "Removing $tmp_printer ..."
+      rm -f $tmp_printer
+      ok_msg "$tmp_printer removed!"
    done
  fi

-  ###reloading units
-  sudo systemctl daemon-reload
-
-  ###removing klipper and klippy-env folders
+  ### removing klipper and klippy-env folders
  if [ -d $KLIPPER_DIR ]; then
    status_msg "Removing Klipper directory ..."
    rm -rf $KLIPPER_DIR && ok_msg "Directory removed!"
@@ -111,43 +105,33 @@ remove_klipper(){
  fi

  CONFIRM_MSG=" Klipper was successfully removed!" && print_msg && clear_msg
+  shopt -u extglob # enable extended globbing

  if [ "$REM_MR" == "true" ]; then
-    remove_moonraker
+    remove_moonraker && unset REM_MR
  fi
 }

 #############################################################
 #############################################################

-remove_dwc2(){
-  ### remove "legacy" init.d service
-  if [[ -e /etc/init.d/dwc || -e /etc/default/dwc ]]; then
-    status_msg "Removing DWC2-for-Klipper-Socket Service ..."
-    sudo systemctl stop dwc
-    sudo systemctl disable dwc
-    sudo rm -rf /etc/init.d/dwc /etc/default/dwc
-    sudo update-rc.d -f dwc remove
-    sudo systemctl daemon-reload
-    ok_msg "DWC2-for-Klipper-Socket Service removed!"
+remove_moonraker(){
+  shopt -s extglob # enable extended globbing
+  ### remove "legacy" moonraker init.d service
+  if [ -f /etc/init.d/moonraker ]; then
+    status_msg "Removing Moonraker Service ..."
+    sudo systemctl stop moonraker
+    sudo update-rc.d -f moonraker remove
+    sudo rm -f /etc/init.d/moonraker
+    sudo rm -f /etc/default/moonraker
+    ok_msg "Moonraker Service removed!"
  fi

-  ### remove single instance
-  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "dwc.service")" ]; then
-    status_msg "Removing DWC2-for-Klipper-Socket Service ..."
-    sudo systemctl stop dwc
-    sudo systemctl disable dwc
-    sudo rm -f $SYSTEMDDIR/dwc.service
-    ok_msg "DWC2-for-Klipper-Socket Service removed!"
-  fi
-  if [ -f /tmp/dwc.log ]; then
-    status_msg "Removing /tmp/dwc.log ..." && rm -f /tmp/dwc.log && ok_msg "Done!"
-  fi
-
-  ### remove multi instance services
-  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -E "dwc-[[:digit:]].service")" ]; then
-    status_msg "Removing DWC2-for-Klipper-Socket Services ..."
-    for service in $(find $SYSTEMDDIR -maxdepth 1 -name "dwc-*.service" | cut -d"/" -f5)
+  ### remove all moonraker services
+  FILE="$SYSTEMDDIR/moonraker?(-*([0-9])).service"
+  if ls $FILE 2>/dev/null 1>&2; then
+    status_msg "Removing Moonraker Services ..."
+    for service in $(ls $FILE | cut -d"/" -f5)
    do
      status_msg "Removing $service ..."
      sudo systemctl stop $service
@@ -155,18 +139,92 @@ remove_dwc2(){
      sudo rm -f $SYSTEMDDIR/$service
      ok_msg "Done!"
    done
+    ### reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
+    ok_msg "Moonraker Service removed!"
  fi

-  ### remove multi instance logfiles
-  if [ "$(find /tmp -maxdepth 1 -name "dwc-*.log")" ]; then
-    for logfile in $(find /tmp -maxdepth 1 -name "dwc-*.log")
-    do
-      status_msg "Removing $logfile ..." && rm -f $logfile && ok_msg "Done!"
+  ### remove all logfiles
+  FILE="${HOME}/klipper_logs/moonraker?(-*([0-9])).log"
+  if ls $FILE 2>/dev/null 1>&2; then
+    for log in $(ls $FILE); do
+      status_msg "Removing $log ..."
+      rm -f $log
+      ok_msg "$log removed!"
    done
  fi

-  ### reloading units
-  sudo systemctl daemon-reload
+  ### remove moonraker nginx config
+  if [[ -e $NGINX_CONFD/upstreams.conf || -e $NGINX_CONFD/common_vars.conf ]]; then
+    status_msg "Removing Moonraker NGINX configuration ..."
+    sudo rm -f $NGINX_CONFD/upstreams.conf $NGINX_CONFD/common_vars.conf && ok_msg "Moonraker NGINX configuration removed!"
+  fi
+
+  ### remove legacy api key
+  if [ -e ${HOME}/.klippy_api_key ]; then
+    status_msg "Removing legacy API Key ..." && rm ${HOME}/.klippy_api_key && ok_msg "Done!"
+  fi
+
+  ### remove api key
+  if [ -e ${HOME}/.moonraker_api_key ]; then
+    status_msg "Removing API Key ..." && rm ${HOME}/.moonraker_api_key && ok_msg "Done!"
+  fi
+
+  ### removing moonraker and moonraker-env folder
+  if [ -d $MOONRAKER_DIR ]; then
+    status_msg "Removing Moonraker directory ..."
+    rm -rf $MOONRAKER_DIR && ok_msg "Directory removed!"
+  fi
+  if [ -d $MOONRAKER_ENV ]; then
+    status_msg "Removing moonraker-env directory ..."
+    rm -rf $MOONRAKER_ENV && ok_msg "Directory removed!"
+  fi
+
+  CONFIRM_MSG=" Moonraker was successfully removed!"
+  shopt -u extglob # disable extended globbing
+}
+
+#############################################################
+#############################################################
+
+remove_dwc2(){
+  ### remove "legacy" init.d service
+  if [ -e /etc/init.d/dwc ]; then
+    status_msg "Removing DWC2-for-Klipper-Socket Service ..."
+    sudo systemctl stop dwc
+    sudo update-rc.d -f dwc remove
+    sudo rm -f /etc/init.d/dwc
+    sudo rm -f /etc/default/dwc
+    ok_msg "DWC2-for-Klipper-Socket Service removed!"
+  fi
+
+  ### remove all dwc services
+  if ls /etc/systemd/system/dwc*.service 2>/dev/null 1>&2; then
+    status_msg "Removing DWC2-for-Klipper-Socket Services ..."
+    for service in $(ls /etc/systemd/system/dwc*.service | cut -d"/" -f5)
+    do
+      status_msg "Removing $service ..."
+      sudo systemctl stop $service
+      sudo systemctl disable $service
+      sudo rm -f $SYSTEMDDIR/$service
+      ok_msg "Done!"
+    done
+    ### reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
+    ok_msg "DWC2-for-Klipper-Socket Service removed!"
+  fi
+
+  ### remove all logfiles
+  if ls /tmp/dwc*.log 2>/dev/null 1>&2; then
+    for logfile in $(ls /tmp/dwc*.log)
+    do
+      status_msg "Removing $logfile ..."
+      rm -f $logfile
+      ok_msg "File '$logfile' removed!"
+    done
+  fi

  ### removing the rest of the folders
  if [ -d $DWC2FK_DIR ]; then
@@ -188,84 +246,6 @@ remove_dwc2(){
 #############################################################
 #############################################################

-remove_moonraker(){
-  ### remove "legacy" moonraker init.d service
-  if [[ -e /etc/init.d/moonraker || -e /etc/default/moonraker ]]; then
-    status_msg "Removing Moonraker Service ..."
-    sudo systemctl stop moonraker
-    sudo systemctl disable moonraker
-    sudo rm -rf /etc/init.d/moonraker /etc/default/moonraker
-    sudo update-rc.d -f moonraker remove
-    sudo systemctl daemon-reload
-    ok_msg "Moonraker Service removed!"
-  fi
-
-  ###remove single instance
-  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "moonraker.service")" ]; then
-    status_msg "Removing Moonraker Service ..."
-    sudo systemctl stop moonraker
-    sudo systemctl disable moonraker
-    sudo rm -f $SYSTEMDDIR/moonraker.service
-    ok_msg "Moonraker Service removed!"
-  fi
-  if [ -f /tmp/moonraker.log ]; then
-    status_msg "Removing /tmp/moonraker.log ..." && rm -f /tmp/moonraker.log && ok_msg "Done!"
-  fi
-
-  ###remove multi instance services
-  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -E "moonraker-[[:digit:]].service")" ]; then
-    status_msg "Removing Moonraker Services ..."
-    for service in $(find $SYSTEMDDIR -maxdepth 1 -name "moonraker-*.service" | cut -d"/" -f5)
-    do
-      status_msg "Removing $service ..."
-      sudo systemctl stop $service
-      sudo systemctl disable $service
-      sudo rm -f $SYSTEMDDIR/$service
-      ok_msg "Done!"
-    done
-  fi
-  ###remove multi instance logfiles
-  if [ "$(find /tmp -maxdepth 1 -name "moonraker-*.log")" ]; then
-    for logfile in $(find /tmp -maxdepth 1 -name "moonraker-*.log")
-    do
-      status_msg "Removing $logfile ..." && rm -f $logfile && ok_msg "Done!"
-    done
-  fi
-
-  ###reloading units
-  sudo systemctl daemon-reload
-
-  #remove moonraker nginx config
-  if [[ -e $NGINX_CONFD/upstreams.conf || -e $NGINX_CONFD/common_vars.conf ]]; then
-    status_msg "Removing Moonraker NGINX configuration ..."
-    sudo rm -f $NGINX_CONFD/upstreams.conf $NGINX_CONFD/common_vars.conf && ok_msg "Moonraker NGINX configuration removed!"
-  fi
-
-  #remove legacy api key
-  if [ -e ${HOME}/.klippy_api_key ]; then
-    status_msg "Removing legacy API Key ..." && rm ${HOME}/.klippy_api_key && ok_msg "Done!"
-  fi
-  #remove api key
-  if [ -e ${HOME}/.moonraker_api_key ]; then
-    status_msg "Removing API Key ..." && rm ${HOME}/.moonraker_api_key && ok_msg "Done!"
-  fi
-
-  ###removing moonraker and moonraker-env folder
-  if [ -d $MOONRAKER_DIR ]; then
-    status_msg "Removing Moonraker directory ..."
-    rm -rf $MOONRAKER_DIR && ok_msg "Directory removed!"
-  fi
-  if [ -d $MOONRAKER_ENV ]; then
-    status_msg "Removing moonraker-env directory ..."
-    rm -rf $MOONRAKER_ENV && ok_msg "Directory removed!"
-  fi
-
-  CONFIRM_MSG=" Moonraker was successfully removed!"
-}
-
-#############################################################
-#############################################################
-
 remove_mainsail(){
  ### remove mainsail dir
  if [ -d $MAINSAIL_DIR ]; then
@@ -285,6 +265,14 @@ remove_mainsail(){
    sudo rm /etc/nginx/sites-enabled/mainsail && ok_msg "File removed!"
  fi

+  ### remove mainsail nginx logs and log symlinks
+  for log in $(find /var/log/nginx -name "mainsail*"); do
+    sudo rm -f $log
+  done
+  for log in $(find ${HOME}/klipper_logs -name "mainsail*"); do
+    rm -f $log
+  done
+
  CONFIRM_MSG="Mainsail successfully removed!"
 }

@@ -307,6 +295,14 @@ remove_fluidd(){
    sudo rm /etc/nginx/sites-enabled/fluidd && ok_msg "File removed!"
  fi

+  ### remove mainsail nginx logs and log symlinks
+  for log in $(find /var/log/nginx -name "fluidd*"); do
+    sudo rm -f $log
+  done
+  for log in $(find ${HOME}/klipper_logs -name "fluidd*"); do
+    rm -f $log
+  done
+
  CONFIRM_MSG="Fluidd successfully removed!"
 }

@@ -314,19 +310,10 @@ remove_fluidd(){
 #############################################################

 remove_octoprint(){
-  ###remove single instance
-  if [ "$(systemctl list-unit-files | grep -F "octoprint.service")" ]; then
-    status_msg "Removing OctoPrint Service ..."
-    sudo systemctl stop octoprint
-    sudo systemctl disable octoprint
-    sudo rm -f $SYSTEMDDIR/octoprint.service
-    ok_msg "OctoPrint Service removed!"
-  fi
-
-  ###remove multi instance services
-  if [ "$(systemctl list-unit-files | grep -E "octoprint-[[:digit:]].service")" ]; then
+  ###remove all octoprint services
+  if ls /etc/systemd/system/octoprint*.service 2>/dev/null 1>&2; then
    status_msg "Removing OctoPrint Services ..."
-    for service in $(find $SYSTEMDDIR -maxdepth 1 -name "octoprint-*.service" | cut -d"/" -f5)
+    for service in $(ls /etc/systemd/system/octoprint*.service | cut -d"/" -f5)
    do
      status_msg "Removing $service ..."
      sudo systemctl stop $service
@@ -334,11 +321,11 @@ remove_octoprint(){
      sudo rm -f $SYSTEMDDIR/$service
      ok_msg "OctoPrint Service removed!"
    done
+    ### reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
  fi

-  ###reloading units
-  sudo systemctl daemon-reload
-
  ### remove sudoers file
  if [ -f /etc/sudoers.d/octoprint-shutdown ]; then
    sudo rm -rf /etc/sudoers.d/octoprint-shutdown
@@ -351,8 +338,8 @@ remove_octoprint(){
  fi

  ###remove .octoprint directories
-  if [ "$(find ${HOME} -maxdepth 1 -name ".octoprint*")" ]; then
-    for folder in $(find ${HOME} -maxdepth 1 -name ".octoprint*")
+  if ls -d ${HOME}/.octoprint* 2>/dev/null 1>&2; then
+    for folder in $(ls -d ${HOME}/.octoprint*)
    do
      status_msg "Removing $folder ..." && rm -rf $folder && ok_msg "Done!"
    done
@@ -381,6 +368,8 @@ remove_nginx(){
 }

 remove_klipperscreen(){
+  source_kiauh_ini
+
  ### remove KlipperScreen dir
  if [ -d $KLIPPERSCREEN_DIR ]; then
    status_msg "Removing KlipperScreen directory ..."
@@ -393,11 +382,61 @@ remove_klipperscreen(){
    rm -rf $KLIPPERSCREEN_ENV_DIR && ok_msg "Directory removed!"
  fi

-  ### remove KlipperScreen systemd file
+  ### remove KlipperScreen service
  if [ -e /etc/systemd/system/KlipperScreen.service ]; then
-    status_msg "Removing KlipperScreen Service ..."
-    sudo rm /etc/systemd/system/KlipperScreen.service && ok_msg "File removed!"
+    status_msg "Removing KlipperScreen service ..."
+    sudo systemctl stop KlipperScreen
+    sudo systemctl disable moonraker
+    sudo rm -f $SYSTEMDDIR/KlipperScreen.service
+    ###reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
+    ok_msg "KlipperScreen Service removed!"
+  fi
+
+  ### remove KlipperScreen log
+  if [ -e /tmp/KlipperScreen.log ]; then
+    status_msg "Removing KlipperScreen log file ..."
+    rm -f /tmp/KlipperScreen.log && ok_msg "File removed!"
+  fi
+
+  ### remove KlipperScreen log symlink in config dir
+
+  if [ -e $klipper_cfg_loc/KlipperScreen.log ]; then
+    status_msg "Removing KlipperScreen log symlink ..."
+    rm -f $klipper_cfg_loc/KlipperScreen.log && ok_msg "File removed!"
  fi

  CONFIRM_MSG="KlipperScreen successfully removed!"
 }
+
+remove_mjpg-streamer(){
+  ### remove MJPG-Streamer service
+  if [ -e $SYSTEMDDIR/webcamd.service ]; then
+    status_msg "Removing MJPG-Streamer service ..."
+    sudo systemctl stop webcamd && sudo systemctl disable webcamd
+    sudo rm -f $SYSTEMDDIR/webcamd.service
+    ###reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
+    ok_msg "MJPG-Streamer Service removed!"
+  fi
+
+  ### remove webcamd from /usr/local/bin
+  if [ -e "/usr/local/bin/webcamd" ]; then
+    sudo rm -f "/usr/local/bin/webcamd"
+  fi
+
+  ### remove MJPG-Streamer directory
+  if [ -d ${HOME}/mjpg-streamer ]; then
+    status_msg "Removing MJPG-Streamer directory ..."
+    rm -rf ${HOME}/mjpg-streamer
+    ok_msg "MJPG-Streamer directory removed!"
+  fi
+
+  ### remove webcamd log and symlink
+  [ -f "/var/log/webcamd.log" ] && sudo rm -f "/var/log/webcamd.log"
+  [ -L "${HOME}/klipper_logs/webcamd.log" ] && rm -f "${HOME}/klipper_logs/webcamd.log"
+
+  CONFIRM_MSG="MJPG-Streamer successfully removed!"
+}
--- a/scripts/status.sh
+++ b/scripts/status.sh
@@ -10,6 +10,17 @@ kiauh_status(){
  fi
 }

+check_system_updates(){
+  SYS_UPDATE=$(apt list --upgradeable 2>/dev/null | sed "1d")
+  if [ ! -z "$SYS_UPDATE" ]; then
+    SYS_UPDATE_AVAIL="true"
+    DISPLAY_SYS_UPDATE="${yellow}System upgrade available!${default}"
+  else
+    SYS_UPDATE_AVAIL="false"
+    DISPLAY_SYS_UPDATE="${green}System up to date!       ${default}"
+  fi
+}
+
 klipper_status(){
  kcount=0
  klipper_data=(
@@ -19,7 +30,12 @@ klipper_status(){
  )

  ### count amount of klipper service files in /etc/systemd/system
-  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "klipper" | wc -l)
+  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "^klipper(\-[[:digit:]]+)?\.service$" | wc -l)
+
+  ### a fix to detect an existing "legacy" klipper init.d installation
+  if [ -f /etc/init.d/klipper ] && [ -f /etc/init.d/klipper ]; then
+    SERVICE_FILE_COUNT=1
+  fi

  ### remove the "SERVICE" entry from the klipper_data array if a klipper service is installed
  [ $SERVICE_FILE_COUNT -gt 0 ] && unset klipper_data[0]
@@ -52,7 +68,7 @@ dwc2_status(){
  )

  ### count amount of dwc service files in /etc/systemd/system
-  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "dwc" | wc -l)
+  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "^dwc(\-[[:digit:]]+)?\.service$" | wc -l)

  ### remove the "SERVICE" entry from the dwc_data array if a dwc service is installed
  [ $SERVICE_FILE_COUNT -gt 0 ] && unset dwc_data[0]
@@ -83,7 +99,7 @@ moonraker_status(){
  )

  ### count amount of moonraker service files in /etc/systemd/system
-  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "moonraker" | wc -l)
+  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "^moonraker(\-[[:digit:]]+)?\.service$" | wc -l)

  ### remove the "SERVICE" entry from the moonraker_data array if a moonraker service is installed
  [ $SERVICE_FILE_COUNT -gt 0 ] && unset moonraker_data[0]
@@ -159,7 +175,7 @@ octoprint_status(){
    $OCTOPRINT_DIR
  )
  ### count amount of octoprint service files in /etc/systemd/system
-  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "octoprint" | wc -l)
+  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "^octoprint(\-[[:digit:]]+)?\.service$" | wc -l)

  ### remove the "SERVICE" entry from the octoprint_data array if a octoprint service is installed
  [ $SERVICE_FILE_COUNT -gt 0 ] && unset octoprint_data[0]
@@ -352,16 +368,16 @@ compare_dwc2_versions(){
  read_local_dwc2_version && read_remote_dwc2_version
  if [[ $DWC2_VER_FOUND = "true" ]] && [[ $DWC2_LOCAL_VER == $DWC2_REMOTE_VER ]]; then
    #printf fits the string for displaying it in the ui to a total char length of 12
-    DWC2_LOCAL_VER="${green}$(printf "v%-11s" "$DWC2_LOCAL_VER")${default}"
-    DWC2_REMOTE_VER="${green}$(printf "v%-11s" "$DWC2_REMOTE_VER")${default}"
+    DWC2_LOCAL_VER="${green}$(printf "%-12s" "$DWC2_LOCAL_VER")${default}"
+    DWC2_REMOTE_VER="${green}$(printf "%-12s" "$DWC2_REMOTE_VER")${default}"
  elif [[ $DWC2_VER_FOUND = "true" ]] && [[ $DWC2_LOCAL_VER != $DWC2_REMOTE_VER ]]; then
-    DWC2_LOCAL_VER="${yellow}$(printf "v%-11s" "$DWC2_LOCAL_VER")${default}"
-    DWC2_REMOTE_VER="${green}$(printf "v%-11s" "$DWC2_REMOTE_VER")${default}"
+    DWC2_LOCAL_VER="${yellow}$(printf "%-12s" "$DWC2_LOCAL_VER")${default}"
+    DWC2_REMOTE_VER="${green}$(printf "%-12s" "$DWC2_REMOTE_VER")${default}"
    # set flag for the multi update function
    DWC2_UPDATE_AVAIL="true" && update_arr+=(update_dwc2)
  else
    DWC2_LOCAL_VER=$NONE
-    DWC2_REMOTE_VER="${green}$(printf "v%-11s" "$DWC2_REMOTE_VER")${default}"
+    DWC2_REMOTE_VER="${green}$(printf "%-12s" "$DWC2_REMOTE_VER")${default}"
    DWC2_UPDATE_AVAIL="false"
  fi
 }
@@ -509,6 +525,7 @@ NONE="${red}$(printf "%-12s" "--------")${default}"

 ui_print_versions(){
  unset update_arr
+  check_system_updates
  compare_klipper_versions
  compare_dwc2fk_versions
  compare_dwc2_versions
--- a/scripts/ui/advanced_menu.sh
+++ b/scripts/ui/advanced_menu.sh
@@ -2,18 +2,22 @@ advanced_ui(){
  top_border
  echo -e "|     ${yellow}~~~~~~~~~~~~~ [ Advanced Menu ] ~~~~~~~~~~~~~${default}     | "
  hr
-  echo -e "|  0) $OPRINT_SERVICE_STATUS| "
-  hr
-  echo -e "|                           |                           | "
-  echo -e "|  Klipper:                 |  System:                  | "
-  echo -e "|  1) [Switch Version]      |  6) [Change hostname]     | "
+  if [ ! "$OPRINT_SERVICE_STATUS" == "" ]; then
+    echo -e "|  0) $OPRINT_SERVICE_STATUS| "
+    hr
+    echo -e "|                           |                           | "
+  fi
+  echo -e "|  Klipper:                 |  Mainsail:                | "
+  echo -e "|  1) [Switch Branch]       |  7) [Theme installer]     | "
  echo -e "|  2) [Rollback]            |                           | "
-  echo -e "|                           |  Extensions:              | "
-  echo -e "|  Firmware:                |  7) [Shell Command]       | "
+  echo -e "|                           |  System:                  | "
+  echo -e "|  Firmware:                |  8) [Change hostname]     | "
  echo -e "|  3) [Build only]          |                           | "
-  echo -e "|  4) [Build + Flash MCU]   |                           | "
-  echo -e "|  5) [Get MCU ID]          |                           | "
-  echo -e "|                           |                           | "
+  echo -e "|  4) [Build + Flash]       |  Extensions:              | "
+  echo -e "|  5) [Build + SD Flash]    |  9) [Shell Command]       | "
+  echo -e "|  6) [Get MCU ID]          |                           | "
+  echo -e "|                           |  CustomPiOS:              | "
+  echo -e "|                           |  10) [Migration Helper]   | "
 quit_footer
 }

@@ -31,31 +35,43 @@ advanced_menu(){
        print_msg && clear_msg
        advanced_ui;;
      1)
-        do_action "switch_menu" "advanced_ui";;
+        do_action "switch_menu";;
      2)
        do_action "load_klipper_state" "advanced_ui";;
      3)
        do_action "build_fw" "advanced_ui";;
      4)
-        clear
-        print_header
+        clear && print_header
        flash_routine
-        ### build in a sleep to give the user a chance to have a look at the
-        ### MCU IDs before directly starting to build the klipper firmware
-        status_msg "Please wait..." && sleep 10 && build_fw
-        flash_mcu
+        if [ $FLASH_FIRMWARE = "true" ]; then
+          status_msg "Please wait..." && sleep 5 && build_fw
+          select_mcu_id
+        fi
        print_msg && clear_msg
        advanced_ui;;
      5)
-        do_action "get_mcu_id" "advanced_ui";;
+        clear && print_header
+        flash_routine_sd
+        if [ $FLASH_FW_SD = "true" ]; then
+          status_msg "Please wait..." && sleep 5 && build_fw
+          select_mcu_id
+        fi
+        print_msg && clear_msg
+        advanced_ui;;
      6)
+        do_action "get_mcu_id" "advanced_ui";;
+      7)
+        do_action "ms_theme_menu";;
+      8)
        clear
        print_header
        create_custom_hostname && set_hostname
        print_msg && clear_msg
        advanced_ui;;
-      7)
+      9)
        do_action "setup_gcode_shell_command" "advanced_ui";;
+      10)
+        do_action "migration_menu";;
      Q|q)
        clear; main_menu; break;;
      *)
@@ -153,3 +169,40 @@ rollback_ui(){
  echo -e "|  $PREV_UI                             | "
  quit_footer
 }
+
+#############################################################
+#############################################################
+
+migration_ui(){
+  top_border
+  echo -e "|     $(title_msg "~~~~~~~~~ [ CustomPiOS Migration ] ~~~~~~~~~~")     | "
+  hr
+  echo -e "|  This function will help you to migrate a vanilla     | "
+  echo -e "|  MainsailOS or FluiddPi image to a newer state.       | "
+  blank_line
+  echo -e "|  Only use this function if you use MainsailOS 0.4.0   | "
+  echo -e "|  or lower, or FluiddPi v1.13.0 or lower.              | "
+  blank_line
+  echo -e "|  Please have a look at the KIAUH changelog for more   | "
+  echo -e "|  details on what this function will do.               | "
+  hr
+  echo -e "|                                                       | "
+  echo -e "|  1) [Migrate MainsailOS]                              | "
+  echo -e "|  2) [Migrate FluiddPi]                                | "
+  echo -e "|                                                       | "
+  quit_footer
+}
+
+migration_menu(){
+  print_msg && clear_msg
+  migration_ui
+  while true; do
+    read -p "${cyan}Perform action:${default} " action; echo
+    case "$action" in
+      1) migrate_custompios "mainsail"; migration_menu;;
+      2) migrate_custompios "fluiddpi"; migration_menu;;
+      Q|q) clear; advanced_menu; break;;
+      *) print_unkown_cmd; migration_menu;;
+    esac
+  done
+}
--- a/scripts/ui/backup_menu.sh
+++ b/scripts/ui/backup_menu.sh
@@ -5,15 +5,15 @@ backup_ui(){
  echo -e "|           ${yellow}Backup location: ~/kiauh-backups${default}            | "
  hr
  echo -e "|  Configuration folder: |  Klipper Webinterface:       | "
-  echo -e "|  0) [Klipper configs]  |  3) [Mainsail]               | "
-  echo -e "|                        |  4) [Fluidd]                 | "
+  echo -e "|  0) [Klipper configs]  |  4) [Mainsail]               | "
+  echo -e "|                        |  5) [Fluidd]                 | "
  echo -e "|  Firmware:             |                              | "
  echo -e "|  1) [Klipper]          |  HDMI Screen:                | "
-  echo -e "|                        |  5) [KlipperScreen]          | "
+  echo -e "|                        |  6) [KlipperScreen]          | "
  echo -e "|  Klipper API:          |                              | "
  echo -e "|  2) [Moonraker]        |  Other:                      | "
-  echo -e "|                        |  6) [Duet Web Control]       | "
-  echo -e "|                        |  7) [OctoPrint]              | "
+  echo -e "|  3) [Moonraker DB]     |  7) [Duet Web Control]       | "
+  echo -e "|                        |  8) [OctoPrint]              | "
  quit_footer
 }

@@ -29,14 +29,16 @@ backup_menu(){
      2)
        do_action "backup_moonraker" "backup_ui";;
      3)
-        do_action "backup_mainsail" "backup_ui";;
+        do_action "backup_moonraker_database" "backup_ui";;
      4)
-        do_action "backup_fluidd" "backup_ui";;
+        do_action "backup_mainsail" "backup_ui";;
      5)
-        do_action "backup_klipperscreen" "backup_ui";;
+        do_action "backup_fluidd" "backup_ui";;
      6)
-        do_action "backup_dwc2" "backup_ui";;
+        do_action "backup_klipperscreen" "backup_ui";;
      7)
+        do_action "backup_dwc2" "backup_ui";;
+      8)
        do_action "backup_octoprint" "backup_ui";;
      Q|q)
        clear; main_menu; break;;
--- a/scripts/ui/general_ui.sh
+++ b/scripts/ui/general_ui.sh
@@ -31,17 +31,19 @@ print_header(){

 kiauh_update_msg(){
  top_border
-  echo -e "|  ${yellow}There is a newer version of this script available!${default}   | "
-  echo -e "|  ${yellow}Type 'update' if you want to update KIAUH now.${default}       | "
+  echo -e "|${green}              New KIAUH update available!              ${default}| "
+  hr
+  echo -e "|${green}  View Changelog: https://git.io/JnmlX                 ${default}| "
  blank_line
-  echo -e "|  ${yellow}Check out the KIAUH changelog for important changes${default}  | "
-  echo -e "|  ${yellow}either to the script or the installable components!${default}  | "
+  echo -e "|${yellow}  It is recommended to keep KIAUH up to date. Updates  ${default}| "
+  echo -e "|${yellow}  usually contain bugfixes, important changes or new   ${default}| "
+  echo -e "|${yellow}  features. Please consider updating!                  ${default}| "
  bottom_border
 }

-##############################################################################################
-#********************************************************************************************#
-##############################################################################################
+################################################################################
+#******************************************************************************#
+################################################################################
 ### TODO: rework other menus to make use of the following functions too and make them more readable

 do_action(){
--- a/scripts/ui/install_menu.sh
+++ b/scripts/ui/install_menu.sh
@@ -6,16 +6,16 @@ install_ui(){
  echo -e "|  all necessary dependencies for the various           | "
  echo -e "|  functions on a completely fresh system.              | "
  hr
-  echo -e "|  Firmware:             |  Klipper Webinterface:       | "
-  echo -e "|  1) [Klipper]          |  3) [Mainsail]               | "
-  echo -e "|                        |  4) [Fluidd]                 | "
-  echo -e "|  Klipper API:          |                              | "
-  echo -e "|  2) [Moonraker]        |  HDMI Screen:                | "
-  echo -e "|                        |  5) [KlipperScreen]          | "
-  echo -e "|                        |                              | "
-  echo -e "|                        |  Other:                      | "
-  echo -e "|                        |  6) [Duet Web Control]       | "
-  echo -e "|                        |  7) [OctoPrint]              | "
+  echo -e "|  Firmware:                |  Touchscreen GUI:         | "
+  echo -e "|  1) [Klipper]             |  5) [KlipperScreen]       | "
+  echo -e "|                           |                           | "
+  echo -e "|  Klipper API:             |  Other:                   | "
+  echo -e "|  2) [Moonraker]           |  6) [Duet Web Control]    | "
+  echo -e "|                           |  7) [OctoPrint]           | "
+  echo -e "|  Klipper Webinterface:    |                           | "
+  echo -e "|  3) [Mainsail]            |  Webcam:                  | "
+  echo -e "|  4) [Fluidd]              |  8) [MJPG-Streamer]       | "
+  echo -e "|                           |                           | "
  quit_footer
 }

@@ -38,6 +38,8 @@ install_menu(){
        do_action "dwc_setup_dialog" "install_ui";;
      7)
        do_action "octoprint_setup_dialog" "install_ui";;
+      8)
+        do_action "install_mjpg-streamer" "install_ui";;
      Q|q)
        clear; main_menu; break;;
      *)
--- a/scripts/ui/main_menu.sh
+++ b/scripts/ui/main_menu.sh
@@ -1,4 +1,5 @@
 main_ui(){
+  #[ $KIAUH_UPDATE_REMIND="true" ] && kiauh_update_reminder
  top_border
  echo -e "|     $(title_msg "~~~~~~~~~~~~~~~ [ Main Menu ] ~~~~~~~~~~~~~~~")     |"
  hr
@@ -22,11 +23,26 @@ print_kiauh_version(){
  KIAUH_VER="$(printf "%-20s" "$KIAUH_VER")"
 }

+kiauh_update_dialog(){
+  kiauh_update_msg
+  read -p "${cyan}Do you want to update now? (Y/n):${default} " yn
+  while true; do
+    case "$yn" in
+    Y|y|Yes|yes|"")
+      do_action "update_kiauh"
+      break;;
+    N|n|No|no) break;;
+    *)
+      deny_action "kiauh_update_dialog";;
+    esac
+  done
+}
+
 main_menu(){
  print_header
  #print KIAUH update msg if update available
    if [ "$KIAUH_UPDATE_AVAIL" = "true" ]; then
-      kiauh_update_msg
+      kiauh_update_dialog
    fi
  #check install status
    print_kiauh_version
--- a/scripts/ui/ms_theme_menu.sh
+++ b/scripts/ui/ms_theme_menu.sh
@@ -0,0 +1,31 @@
+ms_theme_ui(){
+  top_border
+  echo -e "|     ${red}~~~~~~~~ [ Mainsail Theme Installer ] ~~~~~~~${default}     | "
+  hr
+  echo -e "|  Please note:                                         | "
+  echo -e "|  Installing a theme from this menu will overwrite an  | "
+  echo -e "|  already installed theme or modified custom.css file! | "
+  hr
+  echo -e "|  Theme:                                               | "
+  echo -e "|  1) [Dracula]                                         | "
+  echo -e "|  2) [Cyberpunk]                                       | "
+  echo -e "|                                                       | "
+  echo -e "|  R) [Remove Theme]                                    | "
+  echo -e "|                                                       | "
+  quit_footer
+}
+
+ms_theme_menu(){
+  do_action "" "ms_theme_ui"
+  while true; do
+    read -p "${cyan}Perform action:${default} " action; echo
+    case "$action" in
+      1) do_action "ms_theme_dracula" "ms_theme_ui";;
+      2) do_action "ms_theme_cyberpunk" "ms_theme_ui";;
+      R|r) do_action "ms_theme_delete" "ms_theme_ui";;
+      Q|q) clear; advanced_menu; break;;
+      *) deny_action "ms_theme_ui";;
+    esac
+  done
+  ms_theme_menu
+}
--- a/scripts/ui/remove_menu.sh
+++ b/scripts/ui/remove_menu.sh
@@ -7,17 +7,16 @@ remove_ui(){
  echo -e "|  --> ~/kiauh-backups                                  | "
  echo -e "|  You need remove them manually if you wish so.        | "
  hr
-  echo -e "|  Firmware:             |  Klipper Webinterface:       | "
-  echo -e "|  1) [Klipper]          |  3) [Mainsail]               | "
-  echo -e "|                        |  4) [Fluidd]                 | "
-  echo -e "|  Klipper API:          |                              | "
-  echo -e "|  2) [Moonraker]        |  HDMI Screen:                | "
-  echo -e "|                        |  5) [KlipperScreen]          | "
-  echo -e "|                        |                              | "
-  echo -e "|                        |  Other:                      | "
-  echo -e "|                        |  6) [Duet Web Control]       | "
-  echo -e "|                        |  7) [OctoPrint]              | "
-  echo -e "|                        |  8) [NGINX]                  | "
+  echo -e "|  Firmware:                |  Touchscreen GUI:         | "
+  echo -e "|  1) [Klipper]             |  5) [KlipperScreen]       | "
+  echo -e "|                           |                           | "
+  echo -e "|  Klipper API:             |  Other:                   | "
+  echo -e "|  2) [Moonraker]           |  6) [Duet Web Control]    | "
+  echo -e "|                           |  7) [OctoPrint]           | "
+  echo -e "|  Klipper Webinterface:    |  8) [NGINX]               | "
+  echo -e "|  3) [Mainsail]            |  9) [MJPG-Streamer]       | "
+  echo -e "|  4) [Fluidd]              |                           | "
+  echo -e "|                           |                           | "
  quit_footer
 }

@@ -42,6 +41,8 @@ remove_menu(){
        do_action "remove_octoprint" "remove_ui";;
      8)
        do_action "remove_nginx" "remove_ui";;
+      9)
+        do_action "remove_mjpg-streamer" "remove_ui";;
      Q|q)
        clear; main_menu; break;;
      *)
--- a/scripts/ui/update_menu.sh
+++ b/scripts/ui/update_menu.sh
@@ -1,106 +1,61 @@
 update_ui(){
+  ui_print_versions
  top_border
  echo -e "|     ${green}~~~~~~~~~~~~~~ [ Update Menu ] ~~~~~~~~~~~~~~${default}     | "
  hr
-  echo -e "|  Check the following website for important software   | "
-  echo -e "|  changes to the config file before updating Klipper:  | "
-  echo -e "|                                                       | "
-  echo -e "|  ${yellow}https://www.klipper3d.org/Config_Changes.html${default}        | "
-  bottom_border
-  top_border
  echo -e "|  0) $BB4U_STATUS| "
  hr
-  echo -e "|  a) [Update all]       |  Local Vers:  | Remote Vers: | "
-  echo -e "|                        |               |              | "
-  echo -e "|  Firmware:             |               |              | "
+  echo -e "|  a) [Update all]       |               |              | "
+  echo -e "|                        |  Local Vers:  | Remote Vers: | "
+  echo -e "|  Klipper/Klipper API:  |---------------|--------------| "
  echo -e "|  1) [Klipper]          |  $LOCAL_COMMIT | $REMOTE_COMMIT | "
+  echo -e "|  2) [Moonraker]        |  $LOCAL_MOONRAKER_COMMIT | $REMOTE_MOONRAKER_COMMIT | "
  echo -e "|                        |               |              | "
-  echo -e "|  Webinterface:         |---------------|--------------| "
-  echo -e "|  2) [DWC2-for-Klipper] |  $LOCAL_DWC2FK_COMMIT | $REMOTE_DWC2FK_COMMIT | "
-  echo -e "|  3) [DWC2 Web UI]      |  $DWC2_LOCAL_VER | $DWC2_REMOTE_VER | "
-  echo -e "|                        |---------------|--------------| "
-  echo -e "|  4) [Moonraker]        |  $LOCAL_MOONRAKER_COMMIT | $REMOTE_MOONRAKER_COMMIT | "
-  echo -e "|  5) [Mainsail]         |  $MAINSAIL_LOCAL_VER | $MAINSAIL_REMOTE_VER | "
-  echo -e "|  6) [Fluidd]           |  $FLUIDD_LOCAL_VER | $FLUIDD_REMOTE_VER | "
+  echo -e "|  Klipper Webinterface: |---------------|--------------| "
+  echo -e "|  3) [Mainsail]         |  $MAINSAIL_LOCAL_VER | $MAINSAIL_REMOTE_VER | "
+  echo -e "|  4) [Fluidd]           |  $FLUIDD_LOCAL_VER | $FLUIDD_REMOTE_VER | "
  echo -e "|                        |               |              | "
-  echo -e "|  HDMI Screen:          |---------------|--------------| "
-  echo -e "|  7) [KlipperScreen]    |  $LOCAL_KLIPPERSCREEN_COMMIT | $REMOTE_KLIPPERSCREEN_COMMIT | "
+  echo -e "|  Touchscreen GUI:      |---------------|--------------| "
+  echo -e "|  5) [KlipperScreen]    |  $LOCAL_KLIPPERSCREEN_COMMIT | $REMOTE_KLIPPERSCREEN_COMMIT | "
+  echo -e "|                        |               |              | "
+  echo -e "|  Other:                |---------------|--------------| "
+  echo -e "|  6) [DWC2-for-Klipper] |  $LOCAL_DWC2FK_COMMIT | $REMOTE_DWC2FK_COMMIT | "
+  echo -e "|  7) [DWC2 Web UI]      |  $DWC2_LOCAL_VER | $DWC2_REMOTE_VER | "
+  echo -e "|                        |------------------------------| "
+  echo -e "|  8) [System]           |  $DISPLAY_SYS_UPDATE   | "
  quit_footer
 }

 update_menu(){
-  print_header
-  #compare versions
-    ui_print_versions
-  print_msg && clear_msg
  read_bb4u_stat
-  update_ui
+  do_action "" "update_ui"
  while true; do
    read -p "${cyan}Perform action:${default} " action; echo
    case "$action" in
      0)
-        clear
-        print_header
-        toggle_backups
-        print_msg && clear_msg
-        update_ui;;
+        do_action "toggle_backups" "update_ui";;
      1)
-        clear
-        print_header
-        update_klipper && ui_print_versions
-        print_msg && clear_msg
-        update_ui;;
+        do_action "update_klipper" "update_ui";;
      2)
-        clear
-        print_header
-        update_dwc2fk && ui_print_versions
-        print_msg && clear_msg
-        update_ui;;
+        do_action "update_moonraker" "update_ui";;
      3)
-        clear
-        print_header
-        update_dwc2 && ui_print_versions
-        print_msg && clear_msg
-        update_ui;;
+        do_action "update_mainsail" "update_ui";;
      4)
-        clear
-        print_header
-        update_moonraker && ui_print_versions
-        print_msg && clear_msg
-        update_ui;;
+        do_action "update_fluidd" "update_ui";;
      5)
-        clear
-        print_header
-        update_mainsail && ui_print_versions
-        print_msg && clear_msg
-        update_ui;;
+        do_action "update_klipperscreen" "update_ui";;
      6)
-        clear
-        print_header
-        update_fluidd && ui_print_versions
-        print_msg && clear_msg
-        update_ui;;
+        do_action "update_dwc2fk" "update_ui";;
      7)
-        clear
-        print_header
-        update_klipperscreen && ui_print_versions
-        print_msg && clear_msg
-        update_ui;;
+        do_action "update_dwc2" "update_ui";;
+      8)
+        do_action "update_system" "update_ui";;
      a)
-        clear
-        print_header
-        update_all && ui_print_versions
-        print_msg && clear_msg
-        update_ui;;
+        do_action "update_all" "update_ui";;
      Q|q)
        clear; main_menu; break;;
      *)
-        clear
-        print_header
-        print_unkown_cmd
-        print_msg && clear_msg
-        ui_print_versions
-        update_ui;;
+        deny_action "update_ui";;
    esac
  done
  update_menu
--- a/scripts/update.sh
+++ b/scripts/update.sh
@@ -39,6 +39,9 @@ update_all(){
    if [ "$KLIPPERSCREEN_UPDATE_AVAIL" = "true" ]; then
      echo -e "|  ${cyan}● KlipperScreen${default}                                      |"
    fi
+    if [ "$SYS_UPDATE_AVAIL" = "true" ]; then
+      echo -e "|  ${cyan}● System${default}                                             |"
+    fi
    bottom_border
    if [ "${#update_arr[@]}" != "0" ]; then
      read -p "${cyan}###### Do you want to proceed? (Y/n):${default} " yn
@@ -59,6 +62,145 @@ update_all(){
  done
 }

+update_log_paths(){
+  ### update services to make use of moonrakers new log_path option
+  ### https://github.com/Arksine/moonraker/commit/829b3a4ee80579af35dd64a37ccc092a1f67682a
+  shopt -s extglob # enable extended globbing
+  LPATH="${HOME}/klipper_logs"
+  [ ! -d "$LPATH" ] && mkdir -p "$LPATH"
+  FILE="$SYSTEMDDIR/$1?(-*([0-9])).service"
+  for file in $(ls $FILE); do
+    [ "$1" == "klipper" ] && LOG="klippy"
+    [ "$1" == "moonraker" ] && LOG="moonraker"
+    if [ ! "$(grep "\-l" $file)" ]; then
+      status_msg "Updating $file ..."
+      sudo sed -i -r "/ExecStart=/ s|$| -l $LPATH/$LOG.log|" $file
+      ok_msg "$file updated!"
+    elif [ "$(grep "\-l \/tmp\/$LOG" $file)" ]; then
+      status_msg "Updating $file ..."
+      sudo sed -i -r "/ExecStart=/ s|-l \/tmp\/$LOG|-l $LPATH/$LOG|" $file
+      ok_msg "$file updated!"
+    fi
+  done
+  sudo systemctl daemon-reload
+
+  # create symlink for mainsail and fluidd nginx logs
+  symlink_webui_nginx_log "mainsail"
+  symlink_webui_nginx_log "fluidd"
+
+  # create symlink for webcamd log
+  if [ -f "/var/log/webcamd.log" ] && [ ! -L "$LPATH/webcamd.log" ]; then
+    status_msg "Creating symlink for '/var/log/webcamd.log' ..."
+    ln -s "/var/log/webcamd.log" "$LPATH"
+    ok_msg "OK!"
+  fi
+
+  shopt -u extglob # disable extended globbing
+}
+
+migrate_custompios(){
+  ### migrate vanilla mainsailOS 0.4.0 / fluiddPI v1.13.0
+  ### and older to be in sync with newer releases
+  WEBCAMD_SRC="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/mjpgstreamer/filesystem/root/usr/local/bin/webcamd"
+  MJPG_SERV_SRC="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/mjpgstreamer/filesystem/root/etc/systemd/system/webcamd.service"
+  KL_SERV_SRC="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/klipper/filesystem/root/etc/systemd/system/klipper.service"
+  NGINX_CFG1="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/mainsail/filesystem/root/etc/nginx/conf.d/upstreams.conf"
+  NGINX_CFG2="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/mainsail/filesystem/root/etc/nginx/sites-available/mainsail"
+  LOG_ROTATE_KLIPPER="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/klipper/filesystem/root/etc/logrotate.d/klipper"
+  LOG_ROTATE_MOONRAKER="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/moonraker/filesystem/root/etc/logrotate.d/moonraker"
+  LOG_ROTATE_WEBCAMD="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/mjpgstreamer/filesystem/root/etc/logrotate.d/webcamd"
+
+  if [ "$1" == "mainsail" ]; then
+    OS_VER="MainsailOS"
+    MACRO_CFG="mainsail.cfg"
+  fi
+  if [ "$1" == "fluiddpi" ]; then
+    OS_VER="FluiddPi"
+    MACRO_CFG="client_macros.cfg"
+  fi
+  if [ ! -f "/boot/$1.txt" ] || [ ! -f "/etc/init.d/klipper" ]; then
+    # abort function if there is no sign of an old CustomPiOS anymore
+    ERROR_MSG="No vanilla $OS_VER found. Aborting..." && return 0
+  fi
+  status_msg "Starting migration of $OS_VER... Please wait..."
+  if [ -d "${HOME}/klipper_logs" ]; then
+    # delete an existing klipper_logs directory
+    # shouldn't be there in the first place if its a true vanilla CustomPiOS
+    status_msg "Recreate '~/klipper_logs' directory..."
+    rm -rf "${HOME}/klipper_logs" && mkdir "${HOME}/klipper_logs"
+    ok_msg "OK!"
+  fi
+  if [ -f "/boot/$1.txt" ]; then
+    # replace old webcamd.service and webcamd
+    status_msg "Migrating MJPG-Streamer..."
+    sudo systemctl stop webcamd
+    sudo rm -f "/etc/systemd/system/webcamd.service"
+    sudo rm -f "/root/bin/webcamd"
+    sudo wget $WEBCAMD_SRC -O "/usr/local/bin/webcamd"
+    sudo wget $MJPG_SERV_SRC -O "/etc/systemd/system/webcamd.service"
+    sudo sed -i "s/MainsailOS/$OS_VER/" "/etc/systemd/system/webcamd.service"
+    sudo chmod +x "/usr/local/bin/webcamd"
+    # move mainsail.txt/fluiddpi.txt from boot to klipper_config and rename it
+    sudo mv "/boot/$1.txt" "${HOME}/klipper_config/webcam.txt"
+    sudo chown pi:pi "${HOME}/klipper_config/webcam.txt"
+    sudo systemctl daemon-reload
+    sudo systemctl restart webcamd
+    ok_msg "OK!"
+  fi
+  if [ -f "/etc/init.d/klipper" ] && [ ! -f "/etc/systemd/system/klipper.service" ]; then
+    # replace klipper SysVinit service with systemd service
+    status_msg "Migrating Klipper Service..."
+    sudo systemctl stop klipper
+    sudo update-rc.d -f klipper remove
+    sudo rm -f "/etc/init.d/klipper"
+    sudo rm -f "/etc/default/klipper"
+    sudo wget $KL_SERV_SRC -O "/etc/systemd/system/klipper.service"
+    sudo systemctl enable klipper.service
+    sudo systemctl daemon-reload
+    sudo systemctl restart klipper
+    ok_msg "OK!"
+  fi
+  if [ -f "/etc/systemd/system/moonraker.service" ]; then
+    # update new log path in existing moonraker service
+    status_msg "Updating Moonraker Service..."
+    sudo systemctl stop moonraker
+    update_log_paths "moonraker"
+    sudo systemctl restart moonraker
+    ok_msg "OK!"
+  fi
+  if [ -f "/etc/nginx/conf.d/upstreams.conf" ]; then
+    [ "$1" == "mainsail" ] && cfg="mainsail"
+    [ "$1" == "fluiddpi" ] && cfg="fluidd"
+    # update nginx upstreams.conf and mainsail/fluidd config file
+    status_msg "Updating NGINX configurations..."
+    sudo systemctl stop nginx
+    sudo rm -f "/etc/nginx/conf.d/upstreams.conf"
+    sudo rm -f "/etc/nginx/sites-available/$cfg"
+    sudo wget $NGINX_CFG1 -O "/etc/nginx/conf.d/upstreams.conf"
+    sudo wget $NGINX_CFG2 -O "/etc/nginx/sites-available/$cfg"
+    sudo sed -i "s/mainsail/$cfg/g" "/etc/nginx/sites-available/$cfg"
+    sudo systemctl restart nginx
+    ok_msg "OK!"
+  fi
+  if [ -f "${HOME}/klipper_config/$MACRO_CFG" ]; then
+    # update macro files
+    status_msg "Updating $MACRO_CFG ..."
+    MACRO_CFG_PATH="${HOME}/klipper_config/$MACRO_CFG"
+    sed -i "/SAVE_GCODE_STATE NAME=PAUSE_state/d" $MACRO_CFG_PATH
+    sed -i "/RESTORE_GCODE_STATE NAME=PAUSE_state/d" $MACRO_CFG_PATH
+    ok_msg "OK!"
+  fi
+  if [ -d "/etc/logrotate.d" ]; then
+    # download logrotate configs
+    status_msg "Setting up logrotations..."
+    sudo wget $LOG_ROTATE_KLIPPER -O "/etc/logrotate.d/klipper"
+    sudo wget $LOG_ROTATE_MOONRAKER -O "/etc/logrotate.d/moonraker"
+    sudo wget $LOG_ROTATE_WEBCAMD -O "/etc/logrotate.d/webcamd"
+    ok_msg "OK!"
+  fi
+  ok_msg "Migration done!"
+}
+
 update_klipper(){
  klipper_service "stop"
  if [ ! -d $KLIPPER_DIR ]; then
@@ -69,18 +211,23 @@ update_klipper(){
    save_klipper_state
    status_msg "Updating $GET_BRANCH"
    cd $KLIPPER_DIR
-    KLIPPER_OLDREQ_MD5SUM="$(md5sum $KLIPPER_DIR/scripts/klippy-requirements.txt | cut -d " " -f1)"

    if [ "$DETACHED_HEAD" == "true" ]; then
      git checkout $GET_BRANCH
      unset DETACHED_HEAD
    fi

+    ### get current klippy-requirements.txt md5sum
+    KLIPPER_OLDREQ_MD5SUM="$(md5sum $KLIPPER_DIR/scripts/klippy-requirements.txt | cut -d " " -f1)"
    ### pull latest files from github
-    git pull && ok_msg "Update successfull!"
+    git pull
+    ### read PKGLIST and install possible new dependencies
+    install_klipper_packages
+    ### get possible new klippy-requirements.txt md5sum
+    KLIPPER_NEWREQ_MD5SUM="$(md5sum $KLIPPER_DIR/scripts/klippy-requirements.txt | cut -d " " -f1)"

    ### check for possible new dependencies and install them
-    if [[ $(md5sum $KLIPPER_DIR/scripts/klippy-requirements.txt | cut -d " " -f1) != $KLIPPER_OLDREQ_MD5SUM ]]; then
+    if [[ $KLIPPER_NEWREQ_MD5SUM != $KLIPPER_OLDREQ_MD5SUM ]]; then
      PYTHONDIR="${HOME}/klippy-env"
      status_msg "New dependecies detected..."

@@ -90,9 +237,9 @@ update_klipper(){
      $PYTHONDIR/bin/pip install -r $KLIPPER_DIR/scripts/klippy-requirements.txt
      ok_msg "Dependencies have been installed!"
    fi
-
-    ok_msg "Update complete!"
  fi
+  update_log_paths "klipper"
+  ok_msg "Update complete!"
  klipper_service "restart"
 }

@@ -109,19 +256,21 @@ update_dwc2fk(){

 update_dwc2(){
  bb4u "dwc2"
-  download_dwc2_webui
+  download_dwc_webui
 }

 update_mainsail(){
  bb4u "mainsail"
  status_msg "Updating Mainsail ..."
  mainsail_setup
+  symlink_webui_nginx_log "mainsail"
 }

 update_fluidd(){
  bb4u "fluidd"
  status_msg "Updating Fluidd ..."
  fluidd_setup
+  symlink_webui_nginx_log "fluidd"
 }

 update_moonraker(){
@@ -129,13 +278,18 @@ update_moonraker(){
  bb4u "moonraker"
  status_msg "Updating Moonraker ..."
  cd $MOONRAKER_DIR
-  MOONRAKER_OLDREQ_MD5SUM=$(md5sum $MOONRAKER_DIR/scripts/moonraker-requirements.txt | cut -d " " -f1)

+  ### get current moonraker-requirements.txt md5sum
+  MOONRAKER_OLDREQ_MD5SUM=$(md5sum $MOONRAKER_DIR/scripts/moonraker-requirements.txt | cut -d " " -f1)
  ### pull latest files from github
-  git pull && ok_msg "Update successfull!"
+  git pull
+  ### read PKGLIST and install possible new dependencies
+  install_moonraker_packages
+  ### get possible new moonraker-requirements.txt md5sum
+  MOONRAKER_NEWREQ_MD5SUM=$(md5sum $MOONRAKER_DIR/scripts/moonraker-requirements.txt | cut -d " " -f1)

  ### check for possible new dependencies and install them
-  if [[ $(md5sum $MOONRAKER_DIR/scripts/moonraker-requirements.txt | cut -d " " -f1) != $MOONRAKER_OLDREQ_MD5SUM ]]; then
+  if [[ $MOONRAKER_NEWREQ_MD5SUM != $MOONRAKER_OLDREQ_MD5SUM ]]; then
    PYTHONDIR="${HOME}/moonraker-env"
    status_msg "New dependecies detected..."
    ### always rebuild the pythondir from scratch if new dependencies were detected
@@ -145,7 +299,7 @@ update_moonraker(){
    ${PYTHONDIR}/bin/pip install -r $MOONRAKER_DIR/scripts/moonraker-requirements.txt
    ok_msg "Dependencies have been installed!"
  fi
-
+  update_log_paths "moonraker"
  ok_msg "Update complete!"
  moonraker_service "restart"
 }
@@ -155,7 +309,7 @@ update_klipperscreen(){
  cd $KLIPPERSCREEN_DIR
  KLIPPERSCREEN_OLDREQ_MD5SUM=$(md5sum $KLIPPERSCREEN_DIR/scripts/KlipperScreen-requirements.txt | cut -d " " -f1)
  git pull origin master -q && ok_msg "Fetch successfull!"
-  git checkout -f origin/master && ok_msg "Checkout successfull"
+  git checkout -f master && ok_msg "Checkout successfull"
  #KLIPPERSCREEN_NEWREQ_MD5SUM=$(md5sum $KLIPPERSCREEN_DIR/scripts/KlipperScreen-requirements.txt)
  if [[ $(md5sum $KLIPPERSCREEN_DIR/scripts/KlipperScreen-requirements.txt | cut -d " " -f1) != $KLIPPERSCREEN_OLDREQ_MD5SUM ]]; then
    status_msg "New dependecies detected..."
@@ -166,3 +320,10 @@ update_klipperscreen(){
  ok_msg "Update complete!"
  start_klipperscreen
 }
+
+update_system(){
+  status_msg "Updating System ..."
+  sudo apt-get update && sudo apt-get upgrade -y
+  ok_msg "Update complete! Check the log above!"
+  ok_msg "KIAUH won't do any dist-upgrades!\n"
+}
--- a/scripts/upload_log.sh
+++ b/scripts/upload_log.sh
@@ -42,13 +42,16 @@ upload_selection(){

  ### find all suitable logfiles for klipper
  logfiles=()
-  if ls /tmp/klippy*.log 2>/dev/null 1>&2; then
-    for kl_log in $(find /tmp/klippy*.log); do
+  klipper_logs="${HOME}/klipper_logs/klippy*.log"
+  moonraker_logs="${HOME}/klipper_logs/moonraker*.log"
+
+  if ls $klipper_logs 2>/dev/null 1>&2; then
+    for kl_log in $(find $klipper_logs); do
      logfiles+=($kl_log)
    done
  fi
-  if ls /tmp/moonraker*.log 2>/dev/null 1>&2; then
-    for mr_log in $(find /tmp/moonraker*.log); do
+  if ls $moonraker_logs 2>/dev/null 1>&2; then
+    for mr_log in $(find $moonraker_logs); do
      logfiles+=($mr_log)
    done
  fi
Author	SHA1	Message	Date
th33xitus	e9706b52d8	Update changelog.md	2021-06-15 17:22:39 +02:00
th33xitus	412e084d6d	script: add short changelog url to kiauh update message	2021-06-15 16:40:10 +02:00
th33xitus	3ebee823ad	script: remove KlipperScreen.log symlink dialog.	2021-06-15 16:12:58 +02:00
th33xitus	72312422e3	fix: performance improvement for loading the advanced menu ui	2021-06-15 15:56:13 +02:00
th33xitus	54089582e4	script: rewrite the auto mainsailOS/fluiddPi migration function No auto update anymore when updating Klipper. The user now must start this function. It's available in the Advanced Menu.	2021-06-15 15:56:13 +02:00
th33xitus	9fd3f930df	script: advanced_menu.sh, switch version becomes switch branch	2021-06-15 15:56:13 +02:00
th33xitus	98f0aa4b8f	script: update log-upload function	2021-06-15 15:56:13 +02:00
th33xitus	19b37e4dc4	script: update klipper.service raw file link	2021-06-15 15:56:13 +02:00
th33xitus	d344b1c5f6	feat: auto mainsailOS / fluiddPi migration script: make use of moonrakers new log_path configuration option script: create webui nginx log symlinks upon installation/update	2021-06-15 15:56:13 +02:00
jordanruthe	f804fcb65d	update: Fix detached head on KlipperScreen update (#93 )	2021-06-13 17:39:12 +02:00
th33xitus	0edfc746d4	script: improve dependency checks on klipper/moonraker update	2021-06-08 17:55:40 +02:00
th33xitus	02ef0578e3	script: reading klipper/moonraker dependencies from their respective install scripts	2021-06-08 17:54:23 +02:00
th33xitus	5d11cd212a	script: update install_moonraker.sh (#89 )	2021-06-04 14:01:54 +02:00
cron410	bf33c77db7	script: install_klipper.sh prompt phrasing (#90 )	2021-06-04 13:55:05 +02:00
th33xitus	0815d7778c	feat: add cyberpunk theme to mainsail theme installer	2021-05-25 18:53:07 +02:00
th33xitus	9a3814f480	fix: typo in SYSTEMDDIR variable	2021-05-25 18:49:45 +02:00
th33xitus	a83585fb06	fix: improve pattern matching	2021-05-25 18:39:37 +02:00
th33xitus	dc27fe47e1	Merge branch 'b3tuning-install-mjpg-steamer-fix'	2021-05-25 12:16:27 +02:00
th33xitus	11b3d7a961	fix: replace config dir in webcamd file	2021-05-25 12:15:01 +02:00
th33xitus	9e0cdb0715	fix: remove webcamd file when removing mjpgstreamer	2021-05-25 12:13:36 +02:00
th33xitus	8abda56749	fix: typo in WEBCAM_TXT_SRC	2021-05-25 12:04:13 +02:00
James Hildebrand	cf20fc3c48	Issue 85 fix	2021-05-24 16:57:21 -07:00
th33xitus	6c8845d7b4	script: show found services in error message	2021-05-23 11:38:32 +02:00
th33xitus	fb0a30814d	fix: validate user input for amount of Klipper instances to install	2021-05-23 10:44:51 +02:00
th33xitus	87f229c62d	Update README.md	2021-05-23 10:08:16 +02:00
th33xitus	5b1da45688	fix: typo in dialog of get_mcu_id	2021-05-23 09:58:34 +02:00
th33xitus	545b978e80	update kiauh_macros.cfg Update macros to reflect recent changes to Klipper `f10247a498`	2021-05-21 08:55:11 +02:00
th33xitus	44f5609de6	script: remove deprecated moonraker.conf entries	2021-04-20 21:53:13 +02:00
th33xitus	f2a26d9b3d	fix: false positive error message during klipper setup add fix some status.sh functions too	2021-04-15 13:03:36 +02:00
Evgenii Shavrin	bb2cdab02b	script: better moonraker service detection (#79 ) More accurate service search	2021-04-13 12:21:16 +02:00
th33xitus	d6596d0a3d	script: change kiauh update notification to a dialog	2021-04-08 18:07:30 +02:00
th33xitus	865fbc07dc	script: updating webui nginx config and moonraker.conf template	2021-04-05 08:59:19 +02:00
th33xitus	40ba33eb19	fix: fix a bug that potentially caused writing a wrong config directory path to the moonraker.service file under special conditions	2021-04-03 19:29:59 +02:00
th33xitus	49b77162b0	fix: typo	2021-03-31 10:06:11 +02:00
th33xitus	adf087e3e5	script: activate [history] in moonraker.conf template	2021-03-31 09:16:31 +02:00
th33xitus	8220647564	script: rework mjpg-streamer service setup	2021-03-28 17:00:25 +02:00
th33xitus	57075ff525	script: rework klipper service setup	2021-03-28 16:45:16 +02:00
th33xitus	2f9de620bc	script: rework moonraker service setup	2021-03-28 15:51:50 +02:00
th33xitus	d658c3a4cd	fix: update nginx config	2021-03-28 15:46:48 +02:00
th33xitus	67f6a2c599	fix: broken update menu	2021-03-27 00:04:25 +01:00
th33xitus	f369c132d2	fix #74 - remove leftovers	2021-03-26 21:48:12 +01:00
th33xitus	cce6ac3c88	feat: add system upgrade	2021-03-26 18:36:05 +01:00
th33xitus	b9fe29068d	script: apt-get update before apt-get install in dependency_check()	2021-03-25 21:40:16 +01:00
th33xitus	104089ea3d	feat: add mjpg-streamer installer	2021-03-25 21:35:24 +01:00
th33xitus	48d97dab01	feat: backup moonraker database	2021-03-24 11:19:50 +01:00
th33xitus	e4a56564a1	fix: command for removing .octoprint dirs while uninstalling OctoPrint	2021-03-24 11:04:43 +01:00
th33xitus	6de8ce3278	script: add database_path to moonraker.conf template	2021-03-22 22:04:27 +01:00
th33xitus	b46457328f	feat: followup to `7c7dd4e`	2021-03-22 13:34:52 +01:00
th33xitus	7c7dd4ec3c	feat: add mainsail theme installer	2021-03-22 10:55:24 +01:00
th33xitus	749293dde0	fix: visual bug	2021-03-17 16:13:53 +01:00
th33xitus	85f8ab4f24	fix: typo	2021-03-17 16:11:56 +01:00
th33xitus	e894496a6e	script: add [history] to moonraker.conf template	2021-03-14 21:30:03 +01:00
th33xitus	19b220b772	fix: #71	2021-03-14 21:15:02 +01:00
th33xitus	a4eaa8952a	script: remove unnecessary cors domains from moonraker.conf template	2021-03-12 11:20:38 +01:00
th33xitus	74a9bf783b	script: deactivate moonrakers debug logging in moonraker.conf template	2021-03-11 22:08:05 +01:00
th33xitus	7597e999a1	fix: add 'octoprint_compat' entry to moonraker.conf template to enable slicer uploads	2021-03-05 09:12:00 +01:00
th33xitus	64d73ca86a	refactor: determine installed services, combine single and multi remove into one step	2021-02-19 11:09:46 +01:00
th33xitus	d3283f7ab7	fix: try to fix a bug where the script errors out, telling that there is already a moonraker service installed but actually there isn't	2021-02-19 11:05:43 +01:00
th33xitus	cb443f6fee	fix: rework remove processes	2021-02-17 20:50:36 +01:00
th33xitus	7162256e3f	fix: remove klipperscreen log from tmp and user defined config folder	2021-02-17 20:31:26 +01:00
th33xitus	938b9d24f5	feature: add sdcard updates	2021-02-06 14:56:57 +01:00
th33xitus	38a3517c89	fix: autocommit.sh example uses .version files for getting mainsail and fluidd version	2021-02-06 12:16:04 +01:00
th33xitus	0b15cd0d9b	fix: delete doubled status_msg in gcode_shell_command extension setup	2021-02-06 12:16:04 +01:00
th33xitus	9d7752a6c5	fix: typo in example pause macro	2021-02-04 19:36:57 +01:00
th33xitus	d1dff4d3b5	fix: logic error in build+flash function	2021-02-01 20:48:05 +01:00
th33xitus	49b7fe395b	fix: detect an existing "legacy" klipper init.d installation	2021-01-31 18:34:05 +01:00
th33xitus	51469d8992	Update screenshot for KIAUH v3.0	2021-01-31 16:28:43 +01:00