fix(moonraker.conf): typos in cors domains

* also make the confirm message more verbose and make it clear that KIAUH won't update any held back packages or any dist upgrades.

.github/FUNDING.yml

@@ -0,0 +1,12 @@
+# These are supported funding model platforms
+
+github: # Replace with up to 4 GitHub Sponsors-enabled usernames e.g., [user1, user2]
+patreon: # Replace with a single Patreon username
+open_collective: # Replace with a single Open Collective username
+ko_fi: th33xitus
+tidelift: # Replace with a single Tidelift platform-name/package-name e.g., npm/babel
+community_bridge: # Replace with a single Community Bridge project-name e.g., cloud-foundry
+liberapay: # Replace with a single Liberapay username
+issuehunt: # Replace with a single IssueHunt username
+otechie: # Replace with a single Otechie username
+custom: # Replace with up to 4 custom sponsorship URLs e.g., ['link1', 'link2']

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,50 @@
+name: Bug report
+description: Create a report to help us improve
+labels: ["bug"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        This issue form is for reporting bugs only!
+        If you have a feature request, please use [feature_request](/new?template=feature_request.yml)
+  - type: textarea
+    id: distro
+    attributes:
+      label: Linux Distribution
+      description: >-
+        The linux distribution the issue occured on
+    validations:
+      required: true
+  - type: textarea
+    id: what-happened
+    attributes:
+      label: What happened
+      description: >-
+        A clear and concise description of what the bug is.
+    validations:
+      required: true
+  - type: textarea
+    id: expected-behavior
+    attributes:
+      label: What did you expect to happen
+      description: >-
+        A clear and concise description of what you expected to happen.
+    validations:
+      required: true
+  - type: textarea
+    id: repro-steps
+    attributes:
+      label: How to reproduce
+      description: >-
+        Minimal and precise steps to reproduce this bug.
+    validations:
+      required: true
+  - type: textarea
+    id: additional-info
+    attributes:
+      label: Additional information
+      description: |
+        If you have any additional information for us, use the field below.
+
+        Please note, you can attach screenshots or screen recordings here, by
+        dragging and dropping files in the field below.

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,5 @@
+blank_issues_enabled: false
+contact_links:
+  - name: Klipper Discord
+    url: https://discord.klipper3d.org/
+    about: Quickest way to get in contact

.github/ISSUE_TEMPLATE/feature_request.yml

@@ -0,0 +1,40 @@
+name: Feature request
+description: Suggest an idea for this project
+labels: ["feature request"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        This issue form is for feature requests only!
+        If you've found a bug, please use [bug_report](/new?template=bug_report.yml)
+  - type: textarea
+    id: problem-description
+    attributes:
+      label: Is your feature request related to a problem? Please describe
+      description: >-
+        A clear and concise description of what the problem is.
+    validations:
+      required: true
+  - type: textarea
+    id: solution-description
+    attributes:
+      label: Describe the solution you'd like
+      description: >-
+        A clear and concise description of what you want to happen.
+    validations:
+      required: true
+  - type: textarea
+    id: possible-alternatives
+    attributes:
+      label: Describe alternatives you've considered
+      description: >-
+        A clear and concise description of any alternative solutions or features you've considered.
+  - type: textarea
+    id: additional-info
+    attributes:
+      label: Additional information
+      description: |
+        If you have any additional information for us, use the field below.
+
+        Please note, you can attach screenshots or screen recordings here, by
+        dragging and dropping files in the field below.

.gitignore

@@ -0,0 +1,2 @@
+.idea
+.shellcheckrc

README.md

@@ -1,12 +1,72 @@
-# KIAUH
+![main_menu](resources/screenshots/kiauh.png)
+# Klipper Installation And Update Helper
+![GitHub](https://img.shields.io/github/license/th33xitus/kiauh) ![GitHub Repo stars](https://img.shields.io/github/stars/th33xitus/kiauh) ![GitHub forks](https://img.shields.io/github/forks/th33xitus/kiauh) ![GitHub tag (latest SemVer)](https://img.shields.io/github/v/tag/th33xitus/kiauh) ![GitHub last commit](https://img.shields.io/github/last-commit/th33xitus/kiauh) ![GitHub contributors](https://img.shields.io/github/contributors/th33xitus/kiauh)
 
-## Klipper Installation And Update Helper
+### **📋 Please see the [Changelog](docs/changelog.md) for possible important information !**
 
-This script was actually created for my personal use only but i then decided to make the script accessible for everyone.
-It is meant to help guiding you through a complete fresh install of Klipper and optionally the DWC2 web UI + DWC2-for-Klipper.
-There are also functions for updating your current installations or removing them from your system.
+**📢 Disclaimer: Usage of this script happens at your own risk!**
 
-## First things first: When you decide to use this script, you use it at your own risk!
 
-# THIS VERSION IS WORK IN PROGRESS!!! 
-# BUGS MAY BE STILL PRESENT!!!
+## **🛠️ Instructions:**
+
+For downloading this script it is necessary to have git installed.\
+If you haven't, please run `sudo apt-get install git -y` to install git first.\
+After git is installed, use the following commands in the given order to download and execute the script:
+
+```shell
+cd ~
+
+git clone https://github.com/th33xitus/kiauh.git
+
+./kiauh/kiauh.sh
+```
+
+
+## **🧰 Functions and Features:**
+
+### **Core Functions:**
+
+- **Installing** Klipper to your Raspberry Pi or other Debian based Linux Distribution.
+- **Installing** of the Moonraker API (needed for Mainsail, Fluidd and KlipperScreen)
+- **Installing** several web interfaces such as Mainsail, Fluidd, Duet Web Control or OctoPrint including their dependencies.
+- **Installing** of KlipperScreen (OctoScreen but for Klipper!)
+- **Updating** of all the listed installations above excluding OctoPrint. For updating OctoPrint, please use the OctoPrint interface!
+- **Removing** of all the listed installations above.
+- **Backup** of all the listed installations above.
+
+### **Also possible:**
+
+- Build the Klipper Firmware
+- Flash the MCU
+- Read ID of the currently connected MCU
+- and more ...
+
+### **For a list of additional features please see: [Feature List](docs/features.md)**
+
+## **❗ Notes:**
+
+- Tested **only** on Raspberry Pi OS Lite (Debian 10 Buster)
+    - Other Debian based distributions can work
+    - Reported to work on Armbian too
+- During the use of this script you might be asked for your sudo password. There are several functions involved which need sudo privileges.
+
+## **🌐 Sources & Further Information**
+
+For more information or instructions to the various components KIAUH can install, please check out the corresponding repositories listed below:
+
+* ⛵[Klipper](https://github.com/Klipper3d/klipper) by [KevinOConnor](https://github.com/KevinOConnor)
+* 🌙[Moonraker](https://github.com/Arksine/moonraker) by [Arksine](https://github.com/Arksine)
+* 💨[Mainsail](https://github.com/mainsail-crew/mainsail) by [mainsail-crew](https://github.com/mainsail-crew)
+* 🌊[Fluidd](https://github.com/fluidd-core/fluidd) by [fluidd-core](https://github.com/fluidd-core)
+* 🕸️[Duet Web Control](https://github.com/Duet3D/DuetWebControl) by [Duet3D](https://github.com/Duet3D)
+* 🕸️[DWC2-for-Klipper-Socket](https://github.com/Stephan3/dwc2-for-klipper-socket) by [Stephan3](https://github.com/Stephan3)
+* 🖥️[KlipperScreen](https://github.com/jordanruthe/KlipperScreen) by [jordanruthe](https://github.com/jordanruthe)
+* 🐙[OctoPrint](https://github.com/OctoPrint/OctoPrint) by [OctoPrint](https://github.com/OctoPrint)
+* 🔬[PrettyGCode](https://github.com/Kragrathea/pgcode) by [Kragrathea](https://github.com/Kragrathea)
+* 🤖[Moonraker-Telegram-Bot](https://github.com/nlef/moonraker-telegram-bot) by [nlef](https://github.com/nlef)
+
+## **Credits**
+
+* A big thank you to [lixxbox](https://github.com/lixxbox) for that awesome KIAUH-Logo!
+* Also a big thank you to everyone who supported my work with a [Ko-fi](https://ko-fi.com/th33xitus) !
+* Last but not least: Thank you to all contributors and members of the Klipper Community who like and share this project!

docs/changelog.md

@@ -0,0 +1,165 @@
+## Changelog
+
+This document covers possible important changes to KIAUH.
+
+### 2022-01-29
+* Starting from the 28th of January, Moonraker can make use of PackageKit and PolicyKit.\
+More details on that can be found [here](
+https://github.com/Arksine/moonraker/issues/349) and [here](https://github.com/Arksine/moonraker/pull/346)
+* KIAUH will install Moonrakers PolicyKit rules by default when __installing__ Moonraker
+* KIAUH will also install Moonrakers PolicyKit rules when __updating__ Moonraker __via KIAUH__ as of now
+
+### 2021-12-30
+* Updated the doc for the usage of the [G-Code Shell Command Extension](docs/gcode_shell_command.md)
+* It became apparent, that some user groups are missing on some systems. A missing video group \
+membership for example caused issues when installing mjpg-streamer while not using the default pi user. \
+Other issues could occur when trying to flash an MCU on Debian or Ubuntu distributions where a user might not be part
+of the dialout group by default. A check for the tty group is also done. The tty group is needed for setting
+up a linux MCU (currently not yet supported by KIAUH).
+* There is an issue when trying to install Mainsail or Fluidd on Ubuntu 21.10. Permissions on that distro seem to have seen a rework 
+ in comparison to 20.04 and users will be greeted with an "Error 403 - Permission denied" message after installing one of Klippers webinterfaces.
+I still have to figure out a viable solution for that.
+
+### 2021-09-28
+* New Feature! Added an installer for the Telegram Bot for Moonraker by [nlef](https://github.com/nlef).
+Checkout his project! Remember to report all issues and/or bugs regarding that project in its corresponding repo and not here 😛.\
+You can find it here: https://github.com/nlef/moonraker-telegram-bot
+
+### 2021-09-24
+* The flashing function got adjusted a bit. It is now possible to also flash controllers which are connected over UART and thus accessible via `/dev/ttyAMA0`. You now have to select a connection methop prior flashing which is either USB or UART.
+* Due to several requests over time I have now created a Ko-fi account for those who want to support this project and my work with a small donation. Many thanks in advance to all future donors. You can support me on Ko-fi with this link: https://ko-fi.com/th33xitus
+* As usual, if you find any bugs or issues please report them. I tested the little rework i did with the hardware i have available and haven't encountered any malfunctions of flashing them yet.
+
+### 2021-08-10
+* KIAUH now supports the installation of the "PrettyGCode for Klipper" GCode-Viewer created by [Kragrathea](https://github.com/Kragrathea)! Installation, updating and removal are possible with KIAUH. For more details to this cool piece of software, please have a look here: https://github.com/Kragrathea/pgcode
+
+### 2021-07-10
+* The NGINX configuration files got updated to be in sync with MainsailOS and FluiddPi. Issues with the NGINX service not starting up due to wrong configuration should be resolved now. To get the updated configuration files, please remove Moonraker and Mainsail / Fluidd with KIAUH first and then re-install it. An automated file check for those configuration files might follow in the future which then automates updating those files if there were important changes.
+
+* The default `moonraker.conf` was updated to reflect the recent changes to the update manager section. The update channel is set to `dev`.
+
+### 2021-06-29
+* KIAUH will now patch the new `log_path` to existing moonraker.conf files when updating Moonraker and the entry is missing. Before that, it was necessary that the user provided that path manually to make Fluidd display the logfiles in its interface. This issue should be resolved now.
+
+### 2021-06-15
+
+* Moonraker introduced an optional `log_path` which clients can make use of to show log files located in that folder to their users. More info here: https://github.com/Arksine/moonraker/commit/829b3a4ee80579af35dd64a37ccc092a1f67682a \
+Client developers agreed upon using `~/klipper_logs` as the new default log path.\
+That means, from now on, Klipper and Moonraker services installed with KIAUH will place their logfiles in that mentioned folder.
+* Additionally, KIAUH will now detect Klipper and Moonraker systemd services that still use the old default location of `/tmp/<service>.log` and will update them next time the user updates Klipper and/or Moonraker with the KIAUH update function.
+* Additional symlinks for the following logfiles will get created along those update procedures to make them accessible through the webinterface once its supported:
+    - webcamd.log
+    - mainsail-access.log
+    - mainsail-error.log
+    - fluidd-access.log
+    - fluidd-error.log
+* For MainsailOS and FluiddPi users:\
+MainsailOS and FluiddPi will switch the shipped Klipper service from SysVinit to systemd probably with their next release. KIAUH can already help migrate older MainsailOS (0.4.0 and below) and FluiddPi (v1.13.0) releases to match their new service-, file- and folder-structure so you don't have to re-flash the SD-Card of your Raspberry Pi.\
+In detail here is what is going to happen when you use the new "CustomPiOS Migration Helper" from the Advanced Menu\
+`(Main Menu -> 4 -> Enter -> 10 -> Enter)` in a short summary:
+    * The Klipper SysVinit service will get replaced by a Klipper systemd service
+    * Klipper and Moonraker will use the new log-directory `~/klipper_logs`
+    * The webcamd service gets updated
+    * The webcamd script gets updated and moved from `/root/bin/webcamd` to `/usr/local/bin/webcamd`
+    * The NGINX `upstreams.conf` gets updated to be able to configure up to 4 webcams
+    * The `mainsail.txt` / `fluiddpi.txt` gets moved from `/boot` to `~/klipper_config` and renamed to `webcam.txt`
+    * Symlinks for the webcamd.log and various NGINX logs get created in `~/klipper_config`
+    * Configuration files for Klipper, Moonraker and webcamd get added to `/etc/logrotate.d`
+    * If they still exist, two lines will be removed from the mainsail.cfg or client_macros.cfg macro configurations:\
+    `SAVE_GCODE_STATE NAME=PAUSE_state` and `RESTORE_GCODE_STATE NAME=PAUSE_state`
+* **Please note:**\
+The "CustomPiOS Migration Helper" is intended to only work on "vanilla" MainsailOS and FluiddPi systems. Do not try to migrate a modified MainsailOS or FluiddPi system (for example if you already used KIAUH to re-install services or to set up a multi-instance installation for Klipper / Moonraker). This won't work.
+
+### 2021-01-31
+
+* **This is a big one... KIAUH v3.0 is out.**\
+With this update you can now install multiple instances of Klipper, Moonraker, Duet Web Control or Octoprint on the same Pi. This was quite a big rework of the whole script. So bugs can appear but with the help of some testers, i think there shouldn't be any critical ones anymore. In this regards thanks to @lixxbox and @zellneralex for testing.
+
+* Important changes to how installations are set up now: All components get installed as systemd services. Installation via init.d was dropped completely! This shouldn't affect you at all, since the common linux distributions like RaspberryPi OS or custom distributions like MainsailOS, FluiddPi or OctoPi support both ways of installing services. I just wanted to mention it here.
+
+* Now with KIAUH v3.0 and multi-instance installation capabilities, there are some things to point out. You will now need to tell KIAUH where your printers configurations are located when installing Klipper for the first time. Even though it is not recommended, you can change this location with the help of KIAUH and rewrite Klipper and Moonraker to use the new location.
+
+* When setting up a multi-instance system, the folder structure will only change slightly. The goal was to keep it as compatible as possible with the custom distributions like mainsailOS and FluiddPi. This should help converting a single-instance setup of mainsailOS/FluiddPi to a multi-instance setup in no time, but keeping single-instance backwards compatibility if needed at a later point in time.
+
+* The folder structure is as follows when setting up multi-instances:\
+Each printer instance will get its own folder within your configuration location. The decision to this specific structure was made to make it as painless and easy as possible to convert to a multi-instance setup.
+Here is an example:
+    ```shell
+    /home/<username>
+              └── klipper_config
+                  ├── printer_1
+                  │   ├── printer.cfg
+                  │   └── moonraker.conf
+                  ├── printer_2
+                  │   ├── printer.cfg
+                  │   └── moonraker.conf
+                  └── printer_n
+                      ├── printer.cfg
+                      └── moonraker.conf
+    ```
+* Also when setting up multi-instances of each service, the name of each service slightly changes.
+Each service gets its corresponding instance added to the service filename.
+
+    **This only applies to multi-instances! Single instance installations with KIAUH will keep their original names!**
+
+    Corresponding to the filetree example from above that would mean:
+    ```
+    Klipper services:
+            --> klipper-1.service
+            --> klipper-2.service
+            --> klipper-n.service
+
+    Moonraker services:
+            --> moonraker-1.service
+            --> moonraker-2.service
+            --> moonraker-n.service
+    ```
+* The same service file rules from above apply to DWC and OctoPrint even though only Klipper and Moonraker are shown in this example.
+
+* You can start, stop and restart all Klipper, Moonraker, DWC and OctoPrint instances from the KIAUH main menu. For doing this, just type "stop klipper", "start moonraker", "restart octoprint" and so on.
+
+* KIAUH v3.0 relocated its ini-file. It is now a hidden file in the users home-directory calles `.kiauh.ini`. This has the benefit of keeping all values in that file between possible re-installations of KIAUH. Otherwise that file would be lost.
+
+* The option of adding more trusted clients to the moonraker.conf file was dropped. Since you can edit this file right inside of Mainsail or Fluidd, only some basic entries are made which get you running.
+
+* I bet i have missed mentioning other stuff as well because it took me quite some time to re-write many functions. So i just hope you like the new version 😄
+
+### 2020-11-28
+
+* KIAUH now supports the installation, update and removal of [KlipperScreen](https://github.com/jordanruthe/KlipperScreen). This feature was was provided by [jordanruthe](https://github.com/jordanruthe)! Thank you!
+
+### 2020-11-18
+
+* Some changes to Fluidd caused a little rework on how KIAUH will install/update Fluidd from now on. Please see the [fluidd v1.0.0-rc0 release notes](https://github.com/cadriel/fluidd/releases/tag/v1.0.0-rc.0) for further information about what modifications to the moonraker.conf file exactly had to be done. In a nutshell, KIAUH will now always patch the required entries to the moonraker.conf if not already there.
+
+### 2020-10-30:
+
+* The user can now choose to install Klipper as a systemd service.
+
+* The Shell Command extension and `shell_command.py` got renamed to G-Code Shell Command extension and `gcode_shell_command.py`. In case the [pending PR](https://github.com/KevinOConnor/klipper/pull/2173) will be merged in the future, this was an early attempt to dodge possible incompatibilities. The [G-Code Shell Command docs](gcode_shell_command.md) has been updated accordingly.
+
+* The way how KIAUH interacts and writes to the users printer.cfg got changed. Usually KIAUH wrote everything directly into the printer.cfg. The way it will work from now on is, that a new file called `kiauh.cfg` will be created if there is something that needs to be written to the printer.cfg and everything gets written to `kiauh.cfg` instead. The only thing which then gets written to the users printer.cfg is `[include kiauh.cfg]`. This line will be located at the very top of the existing printer.cfg with a little comment as a note. The user can then decide to either keep the `kiauh.cfg` or take its content, places it into the printer.cfg directly and remove the `[include kiauh.cfg]`.
+
+* The `mainsail_macros.cfg` got renamed to `webui_macros.cfg`. Since Mainsail and Fluidd both use the same kind of pause, cancel and resume macros, a more generic name was chosen for the file containing the example macros one can choose to install when installing those webinterfaces.
+
+### 2020-10-10:
+
+* Support for changing the Klipper branch to the moonraker-dev branch from @Arksine has been dropped. Support for Moonraker has been merged into Klipper mainline a long time ago.
+
+* A new function is available from the main menu. You can now upload your log files to http://paste.c-net.org/ to share them for debugging purposes.
+
+### 2020-10-06:
+
+* Fluidd, a new Klipper interface got added to the list of available installers. At the same time some installation routines have changed or have seen some rework. Changes were made to the installation of NGINX configurations. A method was introduced to change the listen port of a webinterface configuration if there is already another webinterface listening on the default port (80).
+
+* At the moment, the Moonraker installer no longer asks you whether you want to install a web interface too. For now you therefore have to install them with their respective installers. Please report any bugs or issues you encounter.
+
+### 2020-09-17:
+
+* The dev-2.0 branch will be abandoned as of today. If you did a checkout to that branch in the past, you have to checkout back to master to receive updates.
+
+### 2020-09-12:
+
+* The old [dwc2-for-klipper](https://github.com/Stephan3/dwc2-for-klipper) won't be supported anymore!\
+The is a new, fully rewritten project available: [dwc2-for-klipper-socket](https://github.com/Stephan3/dwc2-for-klipper-socket).\
+The installer of this script also got rewritten to make use of that new project. You will not be able to install or remove the old [dwc2-for-klipper](https://github.com/Stephan3/dwc2-for-klipper) with KIAUH anymore if you updated KIAUH to the newest version.

docs/features.md

@@ -0,0 +1,28 @@
+# Feature List:
+
+- **Automatic dependency check:**\
+If packages are missing but needed for the asked task, the script will automatically install them
+- **Switch between different Klipper Forks:**\
+[origin/master](https://github.com/KevinOConnor/klipper/tree/master) or [scurve-shaping](https://github.com/dmbutyugin/klipper/tree/scurve-shaping) or [scurve-smoothing](https://github.com/dmbutyugin/klipper/tree/scurve-smoothing)\
+The update function of the script will always update the currently selected/active fork!
+- **Toggle auto-create backups before updating:**\
+When enabled, a backup of the installation you want to update is made prior updating
+- **Rollback:**\
+When updating Klipper, KIAUH saves the current commit hash to a local ini-file. In case of an unsuccesfull update you can use this function to quickly revert back to the commit with the hash you updated from.
+- **Preconfigure OctoPrint:**\
+When installing OctoPrint, a config is created which preconfigures your installation to be used with Klipper.\
+That means:
+  - adding the restart/shutdown commands for OctoPrint
+  - adding the serial port `/tmp/printer`
+  - set the behavior to "Cancel any ongoing prints but stay connected to the printer"
+- **Enable/Disable OctoPrint Service:**\
+Usefull when using DWC2/Mainsail/Fluidd and OctoPrint at the same time to prevent them interfering with each other
+
+- **Installing a G-Code Shell Command extension:**\
+For further information about that extension please see the  [G-Code Shell Command Extension Doc](gcode_shell_command.md)
+
+- **Uploading logfiles:**\
+You can directly upload logfiles like klippy.log, moonraker.log and dwc2.log from the KIAUH main menu for providing them for troubleshooting purposes.
+
+
+to be continued...

docs/gcode_shell_command.md

@@ -0,0 +1,74 @@
+# G-Code Shell Command Extension
+
+### Creator of this extension is [Arksine](https://github.com/Arksine).
+
+This is a brief explanation of how to use the shell command extension for Klipper, which you can install with KIAUH.
+
+After installing the extension you can execute linux commands or even scripts from within Klipper with custom commands defined in your printer.cfg.
+
+#### How to configure a shell command:
+
+```shell
+# Runs a linux command or script from within klipper.  Note that sudo commands
+# that require password authentication are disallowed. All executable scripts
+# should include a shebang.
+# [gcode_shell_command my_shell_cmd]
+#command:
+#  The linux shell command/script to be executed.  This parameter must be
+#  provided
+#timeout: 2.
+#  The timeout in seconds until the command is forcably terminated.  Default
+#  is 2 seconds.
+#verbose: True
+#  If enabled, the command's output will be forwarded to the terminal.  Its
+#  recommended to set this to false for commands that my run in quick
+#  succession.  Default is True.
+```
+
+Once you have set up a shell command with the given parameters from above in your printer.cfg you can run the command as follows:
+`RUN_SHELL_COMMAND CMD=name`
+
+Example:
+
+```
+[gcode_shell_command hello_world]
+command: echo hello world
+timeout: 2.
+verbose: True
+```
+
+Execute with:
+`RUN_SHELL_COMMAND CMD=hello_world`
+
+### Passing parameters:
+As of commit [f231fa9](https://github.com/th33xitus/kiauh/commit/f231fa9c69191f23277b4e3319f6b675bfa0ee42) it is also possible to pass optional parameters to a `gcode_shell_command`.
+The following short example shows storing the extruder temperature into a variable, passing that value with a parameter to a `gcode_shell_command`, which then, 
+once the gcode_macro runs and the gcode_shell_command gets called, executes the `script.sh`. The script then echoes a message to the console (if `verbose: True`) 
+and writes the value of the parameter into a textfile called `test.txt` located in the home directory.
+
+Content of the `gcode_shell_command` and the `gcode_macro`:
+```
+[gcode_shell_command print_to_file]
+command: sh /home/pi/klipper_config/script.sh
+timeout: 30.
+verbose: True
+
+[gcode_macro GET_TEMP]
+gcode:
+    {% set temp = printer.extruder.temperature %}
+    { action_respond_info("%s" % (temp)) }
+    RUN_SHELL_COMMAND CMD=print_to_file PARAMS={temp}
+```
+
+Content of `script.sh`:
+```shell
+#!/bin/sh
+
+echo "temp is: $1"
+echo "$1" >> "${HOME}/test.txt"
+```
+
+## Warning
+
+This extension may have a high potential for abuse if not used carefully! Also, depending on the command you execute, high system loads may occur and can cause system instabilities.
+Use this extension at your own risk and only if you know what you are doing!

kiauh.ini

@@ -1 +0,0 @@
-backup_before_update=false

kiauh.sh

@@ -2,13 +2,60 @@
 clear
 set -e
 
-### set some variables
-ERROR_MSG=""
-green="\e[92m"
-yellow="\e[93m"
-red="\e[91m"
-cyan="\e[96m"
-default="\e[39m"
+### set color variables
+green=$(echo -en "\e[92m")
+yellow=$(echo -en "\e[93m")
+red=$(echo -en "\e[91m")
+cyan=$(echo -en "\e[96m")
+default=$(echo -en "\e[39m")
+
+### sourcing all additional scripts
+SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
+for script in "${SRCDIR}/kiauh/scripts/"*.sh; do . $script; done
+for script in "${SRCDIR}/kiauh/scripts/ui/"*.sh; do . $script; done
+
+### set important directories
+#klipper
+KLIPPER_DIR=${HOME}/klipper
+KLIPPY_ENV=${HOME}/klippy-env
+#nginx
+NGINX_SA=/etc/nginx/sites-available
+NGINX_SE=/etc/nginx/sites-enabled
+NGINX_CONFD=/etc/nginx/conf.d
+#moonraker
+MOONRAKER_DIR=${HOME}/moonraker
+MOONRAKER_ENV=${HOME}/moonraker-env
+#mainsail
+MAINSAIL_DIR=${HOME}/mainsail
+#fluidd
+FLUIDD_DIR=${HOME}/fluidd
+#dwc2
+DWC2FK_DIR=${HOME}/dwc2-for-klipper-socket
+DWC_ENV_DIR=${HOME}/dwc-env
+DWC2_DIR=${HOME}/duetwebcontrol
+#octoprint
+OCTOPRINT_DIR=${HOME}/OctoPrint
+OCTOPRINT_CFG_DIR=${HOME}/.octoprint
+#KlipperScreen
+KLIPPERSCREEN_DIR=${HOME}/KlipperScreen
+KLIPPERSCREEN_ENV_DIR=${HOME}/.KlipperScreen-env
+#MoonrakerTelegramBot
+MOONRAKER_TELEGRAM_BOT_DIR=${HOME}/moonraker-telegram-bot
+MOONRAKER_TELEGRAM_BOT_ENV_DIR=${HOME}/moonraker-telegram-bot-env
+#misc
+INI_FILE=${HOME}/.kiauh.ini
+BACKUP_DIR=${HOME}/kiauh-backups
+
+### set github repos
+KLIPPER_REPO=https://github.com/Klipper3d/klipper.git
+ARKSINE_REPO=https://github.com/Arksine/klipper.git
+DMBUTYUGIN_REPO=https://github.com/dmbutyugin/klipper.git
+DWC2FK_REPO=https://github.com/Stephan3/dwc2-for-klipper-socket.git
+KLIPPERSCREEN_REPO=https://github.com/jordanruthe/KlipperScreen.git
+NLEF_REPO=https://github.com/nlef/moonraker-telegram-bot.git
+#branches
+BRANCH_SCURVE_SMOOTHING=dmbutyugin/scurve-smoothing
+BRANCH_SCURVE_SHAPING=dmbutyugin/scurve-shaping
 
 ### set some messages
 warn_msg(){
@@ -24,364 +71,35 @@ title_msg(){
   echo -e "${cyan}$1${default}"
 }
 get_date(){
-  current_date=`date +"%Y-%m-%d_%H%M%S"`
+  current_date=$(date +"%y%m%d-%H%M")
+}
+print_unkown_cmd(){
+  ERROR_MSG="Invalid command!"
 }
 
-### sourcing all additional scripts
-for script in ${HOME}/kiauh/scripts/*; do . $script; done
-
-### set important directories
-#klipper
-KLIPPER_DIR=${HOME}/klipper
-KLIPPY_ENV_DIR=${HOME}/klippy-env
-KLIPPER_SERVICE1=/etc/init.d/klipper
-KLIPPER_SERVICE2=/etc/default/klipper
-#dwc2
-DWC2FK_DIR=${HOME}/dwc2-for-klipper
-DWC2_DIR=${HOME}/sdcard/dwc2
-WEB_DWC2=${HOME}/klipper/klippy/extras/web_dwc2.py
-TORNADO_DIR1=${HOME}/klippy-env/lib/python2.7/site-packages/tornado
-TORNADO_DIR2=${HOME}/klippy-env/lib/python2.7/site-packages/tornado-5.1.1.dist-info
-#mainsail/moonraker
-MAINSAIL_DIR=${HOME}/mainsail
-MAINSAIL_SERVICE1=/etc/init.d/moonraker
-MAINSAIL_SERVICE2=/etc/default/moonraker
-#misc
-BACKUP_DIR=${HOME}/kiauh-backups
-PRINTER_CFG=${HOME}/printer.cfg
-
-### set github repos
-KLIPPER_REPO=https://github.com/KevinOConnor/klipper.git
-ARKSINE_REPO=https://github.com/Arksine/klipper.git
-DMBUTYUGIN_REPO=https://github.com/dmbutyugin/klipper.git
-DWC2FK_REPO=https://github.com/Stephan3/dwc2-for-klipper.git
-#branches
-BRANCH_MOONRAKER=Arksine/work-web_server-20200131
-BRANCH_DEV_MOONRAKER=Arksine/dev-moonraker-testing
-BRANCH_SCURVE_SMOOTHING=dmbutyugin/scurve-smoothing
-BRANCH_SCURVE_SHAPING=dmbutyugin/scurve-shaping
-
-print_error_msg(){
+print_msg(){
   if [[ "$ERROR_MSG" != "" ]]; then
     echo -e "${red}"
     echo -e "#########################################################"
-    echo -e "$ERROR_MSG "
+    echo -e " $ERROR_MSG "
+    echo -e "#########################################################"
+    echo -e "${default}"
+  fi
+  if [ "$CONFIRM_MSG" != "" ]; then
+    echo -e "${green}"
+    echo -e "#########################################################"
+    echo -e " $CONFIRM_MSG "
     echo -e "#########################################################"
     echo -e "${default}"
   fi
 }
 
-main_menu(){
-  print_header
-  print_error_msg && ERROR_MSG=""
-  #check install status
-    klipper_status
-    dwc2_status
-    mainsail_status
-    print_branch
-  main_ui
-  while true; do
-    read -p "Perform action: " action; echo
-    case "$action" in
-      0)
-        clear
-        print_header
-        ERROR_MSG=" Sorry this function is not implemented yet!"
-        print_error_msg && ERROR_MSG=""
-        main_ui;;
-      1)
-        clear
-        install_menu
-        break;;
-      2)
-        clear
-        update_menu
-        break;;
-      3)
-        clear
-        remove_menu
-        break;;
-      4)
-        clear
-        advanced_menu
-        break;;
-      5)
-        clear
-        backup_menu
-        break;;
-      Q|q)
-        exit -1;;
-      *)
-        clear
-        print_header
-        ERROR_MSG=" Unknown command '$action'"
-        print_error_msg && ERROR_MSG=""
-        main_ui;;
-    esac
-  done
-  clear; main_menu
-}
-
-install_menu(){
-  print_header
-  install_ui
-  while true; do
-    read -p "Perform action: " action; echo
-    case "$action" in
-      1)
-        clear
-        print_header
-        install_klipper
-        print_error_msg && ERROR_MSG=""
-        install_ui;;
-      2)
-        clear
-        print_header
-        dwc2_install_routine
-        print_error_msg && ERROR_MSG=""
-        install_ui;;
-      3)
-        clear
-        print_header
-        mainsail_install_routine
-        print_error_msg && ERROR_MSG=""
-        install_ui;;
-      Q|q)
-        clear; main_menu; break;;
-      *)
-        clear
-        print_header
-        ERROR_MSG=" Unknown command '$action'"
-        print_error_msg && ERROR_MSG=""
-        install_ui;;
-    esac
-  done
-  install_menu
-}
-
-update_menu(){
-  print_header
-  read_bb4u_stat
-  #compare versions
-    ui_print_versions
-  update_ui
-  while true; do
-    read -p "Perform action: " action; echo
-    case "$action" in
-      0)
-        clear
-        print_header
-        toggle_backups
-        print_error_msg && ERROR_MSG=""
-        update_ui;;
-      1)
-        clear
-        print_header
-        update_klipper && ui_print_versions
-        print_error_msg && ERROR_MSG=""
-        update_ui;;
-      2)
-        clear
-        print_header
-        update_dwc2fk && ui_print_versions
-        print_error_msg && ERROR_MSG=""
-        update_ui;;
-      3)
-        clear
-        print_header
-        update_dwc2 && ui_print_versions
-        print_error_msg && ERROR_MSG=""
-        update_ui;;
-      4)
-        clear
-        print_header
-        update_mainsail && ui_print_versions
-        print_error_msg && ERROR_MSG=""
-        update_ui;;
-      Q|q)
-        clear; main_menu; break;;
-      *)
-        clear
-        print_header
-        ERROR_MSG=" Unknown command '$action'"
-        print_error_msg && ERROR_MSG=""
-        ui_print_versions
-        update_ui;;
-    esac
-  done
-  update_menu
-}
-
-remove_menu(){
-  print_header
-  remove_ui
-  while true; do
-    read -p "Perform action: " action; echo
-    case "$action" in
-      1)
-        clear
-        print_header
-        remove_klipper
-        print_error_msg && ERROR_MSG=""
-        remove_ui;;
-      2)
-        clear
-        print_header
-        remove_dwc2
-        print_error_msg && ERROR_MSG=""
-        remove_ui;;
-      3)
-        clear
-        print_header
-        remove_mainsail
-        print_error_msg && ERROR_MSG=""
-        remove_ui;;
-      Q|q)
-        clear; main_menu; break;;
-      *)
-        clear
-        print_header
-        ERROR_MSG=" Unknown command '$action'"
-        print_error_msg && ERROR_MSG=""
-        remove_ui;;
-    esac
-  done
-  remove_menu
-}
-
-advanced_menu(){
-  print_header
-  print_error_msg && ERROR_MSG=""
-  advanced_ui
-  while true; do
-    read -p "Perform action: " action; echo
-    case "$action" in
-      1)
-        clear
-        switch_menu
-        print_error_msg && ERROR_MSG=""
-        advanced_ui;;
-      2)
-        clear
-        print_header
-        build_fw
-        print_error_msg && ERROR_MSG=""
-        advanced_ui;;
-      3)
-        clear
-        print_header
-        flash_routine
-        print_error_msg && ERROR_MSG=""
-        advanced_ui;;
-      4)
-        clear
-        print_header
-        get_usb_id
-        print_error_msg && ERROR_MSG=""
-        advanced_ui;;
-      5)
-        clear
-        print_header
-        get_usb_id && write_printer_id
-        print_error_msg && ERROR_MSG=""
-        advanced_ui;;
-      6)
-        clear
-        print_header
-        create_dwc2fk_cfg
-        print_error_msg && ERROR_MSG=""
-        advanced_ui;;
-      Q|q)
-        clear; main_menu; break;;
-      *)
-        clear
-        print_header
-        ERROR_MSG=" Unknown command '$action'"
-        print_error_msg && ERROR_MSG=""
-        advanced_ui;;
-    esac
-  done
-  advanced_menu
-}
-
-switch_menu(){
-  print_header
-  if [ -d $KLIPPER_DIR ]; then
-    read_branch
-    print_error_msg && ERROR_MSG=""
-    switch_ui
-    while true; do
-      read -p "Perform action: " action; echo
-      case "$action" in
-        1)
-          clear
-          print_header
-          switch_to_origin
-          read_branch
-          print_error_msg && ERROR_MSG=""
-          switch_ui;;
-        2)
-          clear
-          print_header
-          switch_to_scurve_shaping
-          read_branch
-          print_error_msg && ERROR_MSG=""
-          switch_ui;;
-        3)
-          clear
-          print_header
-          switch_to_scurve_smoothing
-          read_branch
-          print_error_msg && ERROR_MSG=""
-          switch_ui;;
-        4)
-          clear
-          print_header
-          switch_to_moonraker
-          read_branch
-          print_error_msg && ERROR_MSG=""
-          switch_ui;;
-        5)
-          clear
-          print_header
-          switch_to_dev_moonraker
-          read_branch
-          print_error_msg && ERROR_MSG=""
-          switch_ui;;
-        Q|q)
-          clear; advanced_menu; break;;
-      esac
-    done
-  else
-    ERROR_MSG=" No klipper directory found! Download klipper first!"
-  fi
-}
-
-backup_menu(){
-  print_header
-  print_error_msg && ERROR_MSG=""
-  backup_ui
-  while true; do
-    read -p "Perform action: " action; echo
-    case "$action" in
-      1)
-        clear
-        print_header
-        #function goes here
-        print_error_msg && ERROR_MSG=""
-        backup_ui;;
-      Q|q)
-        clear; main_menu; break;;
-      *)
-        clear
-        print_header
-        ERROR_MSG=" Unknown command '$action'"
-        print_error_msg && ERROR_MSG=""
-        backup_ui;;
-    esac
-  done
-  backup_menu
+clear_msg(){
+  unset CONFIRM_MSG
+  unset ERROR_MSG
 }
 
 check_euid
-main_menu
+init_ini
+kiauh_status
+main_menu

resources/autocommit.sh

@@ -0,0 +1,62 @@
+#!/bin/bash
+
+#####################################################################
+### Please set the paths accordingly. In case you don't have all  ###
+### the listed folders, just keep that line commented out.        ###
+#####################################################################
+### Path to your config folder you want to backup
+#config_folder=~/klipper_config
+
+### Path to your Klipper folder, by default that is '~/klipper'
+#klipper_folder=~/klipper
+
+### Path to your Moonraker folder, by default that is '~/moonraker'
+#moonraker_folder=~/moonraker
+
+### Path to your Mainsail folder, by default that is '~/mainsail'
+#mainsail_folder=~/mainsail
+
+### Path to your Fluidd folder, by default that is '~/fluidd'
+#fluidd_folder=~/fluidd
+
+#####################################################################
+#####################################################################
+
+
+#####################################################################
+################ !!! DO NOT EDIT BELOW THIS LINE !!! ################
+#####################################################################
+grab_version(){
+  if [ ! -z "$klipper_folder" ]; then
+    cd "$klipper_folder"
+    klipper_commit=$(git rev-parse --short=7 HEAD)
+    m1="Klipper on commit: $klipper_commit"
+    cd ..
+  fi
+  if [ ! -z "$moonraker_folder" ]; then
+    cd "$moonraker_folder"
+    moonraker_commit=$(git rev-parse --short=7 HEAD)
+    m2="Moonraker on commit: $moonraker_commit"
+    cd ..
+  fi
+  if [ ! -z "$mainsail_folder" ]; then
+    mainsail_ver=$(head -n 1 $mainsail_folder/.version)
+    m3="Mainsail version: $mainsail_ver"
+  fi
+  if [ ! -z "$fluidd_folder" ]; then
+    fluidd_ver=$(head -n 1 $fluidd_folder/.version)
+    m4="Fluidd version: $fluidd_ver"
+  fi
+}
+
+push_config(){
+  cd $config_folder
+  git pull
+  git add .
+  current_date=$(date +"%Y-%m-%d %T")
+  git commit -m "Autocommit from $current_date" -m "$m1" -m "$m2" -m "$m3" -m "$m4"
+  git push
+}
+
+grab_version
+push_config

resources/common_vars.conf

@@ -0,0 +1,6 @@
+# /etc/nginx/conf.d/common_vars.conf
+
+map $http_upgrade $connection_upgrade {
+    default upgrade;
+    '' close;
+}

resources/dwc2_nginx.cfg

@@ -0,0 +1,26 @@
+map $http_upgrade $connection_upgrade {
+    default upgrade;
+    '' close;
+}
+
+upstream dwc2 {
+    server 127.0.0.1:4750;
+}
+
+server {
+    listen 80;
+    #listen [::]:80;
+
+    location / {
+        proxy_pass http://dwc2/;
+        proxy_set_header Host $http_host;
+        proxy_set_header Upgrade $http_upgrade;
+        proxy_set_header Connection "upgrade";
+        proxy_set_header X-Real-IP $remote_addr;
+        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+        proxy_set_header X-Scheme $scheme;
+        #proxy_set_header X-Script-Name /;
+        proxy_http_version 1.1;
+        client_max_body_size 0;
+    }
+}

resources/gcode_shell_command.py

@@ -0,0 +1,87 @@
+# Run a shell command via gcode
+#
+# Copyright (C) 2019  Eric Callahan <arksine.code@gmail.com>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import os
+import shlex
+import subprocess
+import logging
+
+class ShellCommand:
+    def __init__(self, config):
+        self.name = config.get_name().split()[-1]
+        self.printer = config.get_printer()
+        self.gcode = self.printer.lookup_object('gcode')
+        cmd = config.get('command')
+        cmd = os.path.expanduser(cmd)
+        self.command = shlex.split(cmd)
+        self.timeout = config.getfloat('timeout', 2., above=0.)
+        self.verbose = config.getboolean('verbose', True)
+        self.proc_fd = None
+        self.partial_output = ""
+        self.gcode.register_mux_command(
+            "RUN_SHELL_COMMAND", "CMD", self.name,
+            self.cmd_RUN_SHELL_COMMAND,
+            desc=self.cmd_RUN_SHELL_COMMAND_help)
+
+    def _process_output(self, eventime):
+        if self.proc_fd is None:
+            return
+        try:
+            data = os.read(self.proc_fd, 4096)
+        except Exception:
+            pass
+        data = self.partial_output + data.decode()
+        if '\n' not in data:
+            self.partial_output = data
+            return
+        elif data[-1] != '\n':
+            split = data.rfind('\n') + 1
+            self.partial_output = data[split:]
+            data = data[:split]
+        else:
+            self.partial_output = ""
+        self.gcode.respond_info(data)
+
+    cmd_RUN_SHELL_COMMAND_help = "Run a linux shell command"
+    def cmd_RUN_SHELL_COMMAND(self, params):
+        gcode_params = params.get('PARAMS','')
+        gcode_params = shlex.split(gcode_params)
+        reactor = self.printer.get_reactor()
+        try:
+            proc = subprocess.Popen(
+                self.command + gcode_params, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+        except Exception:
+            logging.exception(
+                "shell_command: Command {%s} failed" % (self.name))
+            raise self.gcode.error("Error running command {%s}" % (self.name))
+        if self.verbose:
+            self.proc_fd = proc.stdout.fileno()
+            self.gcode.respond_info("Running Command {%s}...:" % (self.name))
+            hdl = reactor.register_fd(self.proc_fd, self._process_output)
+        eventtime = reactor.monotonic()
+        endtime = eventtime + self.timeout
+        complete = False
+        while eventtime < endtime:
+            eventtime = reactor.pause(eventtime + .05)
+            if proc.poll() is not None:
+                complete = True
+                break
+        if not complete:
+            proc.terminate()
+        if self.verbose:
+            if self.partial_output:
+                self.gcode.respond_info(self.partial_output)
+                self.partial_output = ""
+            if complete:
+                msg = "Command {%s} finished\n" % (self.name)
+            else:
+                msg = "Command {%s} timed out" % (self.name)
+            self.gcode.respond_info(msg)
+            reactor.unregister_fd(hdl)
+            self.proc_fd = None
+
+
+def load_config_prefix(config):
+    return ShellCommand(config)

resources/kiauh_macros.cfg

@@ -0,0 +1,59 @@
+################################################################################
+# ~~~~~~~~~~~~~~~~~~~~~~~~  AUTOCREATED WITH KIAUH  ~~~~~~~~~~~~~~~~~~~~~~~~~~ #
+################################################################################
+# Recommended macros and config entries if you use Mainsail or Fluidd!         #
+# You can edit or delete those macros if you already defined them elsewhere!   #
+################################################################################
+
+[pause_resume]
+
+[display_status]
+
+[gcode_macro CANCEL_PRINT]
+rename_existing: BASE_CANCEL_PRINT
+gcode:
+    TURN_OFF_HEATERS
+    CLEAR_PAUSE
+    SDCARD_RESET_FILE
+    BASE_CANCEL_PRINT
+
+[gcode_macro PAUSE]
+rename_existing: BASE_PAUSE
+gcode:
+    ##### set defaults #####
+    {% set x = params.X|default(230) %}      #edit to your park position
+    {% set y = params.Y|default(230) %}      #edit to your park position
+    {% set z = params.Z|default(10)|float %} #edit to your park position
+    {% set e = params.E|default(1) %}        #edit to your retract length
+    ##### calculate save lift position #####
+    {% set max_z = printer.toolhead.axis_maximum.z|float %}
+    {% set act_z = printer.toolhead.position.z|float %}
+    {% set lift_z = z|abs %}
+    {% if act_z < (max_z - lift_z) %}
+        {% set z_safe = lift_z %}
+    {% else %}
+        {% set z_safe = max_z - act_z %}
+    {% endif %}
+    ##### end of definitions #####
+    SAVE_GCODE_STATE NAME=PAUSE_state
+    BASE_PAUSE
+    G91
+    G1 E-{e} F2100
+    G1 Z{z_safe}
+    G90
+    G1 X{x} Y{y} F6000
+
+
+[gcode_macro RESUME]
+rename_existing: BASE_RESUME
+gcode:
+    ##### set defaults #####
+    {% set e = params.E|default(1) %} #edit to your retract length
+    G91
+    G1 E{e} F2100
+    G90
+    RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
+    BASE_RESUME
+
+################################################################################
+################################################################################

resources/klipper.service

@@ -0,0 +1,15 @@
+#Systemd service file for klipper
+[Unit]
+Description=Starts klipper instance %INST% on startup
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+Type=simple
+User=%USER%
+RemainAfterExit=yes
+ExecStart=%KL_ENV%/bin/python %KL_DIR%/klippy/klippy.py %P_CFG% -I %P_TMP% -l %KL_LOG% -a %KL_UDS%
+Restart=always
+RestartSec=10

resources/klipper_webui_nginx.cfg

@@ -0,0 +1,95 @@
+# /etc/nginx/sites-available/<<UI>>
+
+server {
+    listen 80;
+
+    access_log /var/log/nginx/<<UI>>-access.log;
+    error_log /var/log/nginx/<<UI>>-error.log;
+
+    # disable this section on smaller hardware like a pi zero
+    gzip on;
+    gzip_vary on;
+    gzip_proxied any;
+    gzip_proxied expired no-cache no-store private auth;
+    gzip_comp_level 4;
+    gzip_buffers 16 8k;
+    gzip_http_version 1.1;
+    gzip_types text/plain text/css text/xml text/javascript application/javascript application/x-javascript application/json application/xml;
+
+    # web_path from <<UI>> static files
+    root /home/pi/<<UI>>;
+
+    index index.html;
+    server_name _;
+
+    # disable max upload size checks
+    client_max_body_size 0;
+
+    # disable proxy request buffering
+    proxy_request_buffering off;
+
+    location / {
+        try_files $uri $uri/ /index.html;
+    }
+
+    location = /index.html {
+        add_header Cache-Control "no-store, no-cache, must-revalidate";
+    }
+
+    location /websocket {
+        proxy_pass http://apiserver/websocket;
+        proxy_http_version 1.1;
+        proxy_set_header Upgrade $http_upgrade;
+        proxy_set_header Connection $connection_upgrade;
+        proxy_set_header Host $http_host;
+        proxy_set_header X-Real-IP $remote_addr;
+        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+        proxy_read_timeout 86400;
+    }
+
+    location ~ ^/(printer|api|access|machine|server)/ {
+        proxy_pass http://apiserver$request_uri;
+        proxy_http_version 1.1;
+        proxy_set_header Upgrade $http_upgrade;
+        proxy_set_header Host $http_host;
+        proxy_set_header X-Real-IP $remote_addr;
+        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+        proxy_set_header X-Scheme $scheme;
+    }
+
+    location /webcam/ {
+        postpone_output 0;
+        proxy_buffering off;
+        proxy_ignore_headers X-Accel-Buffering;
+        access_log off;
+        error_log off;
+        proxy_pass http://mjpgstreamer1/;
+    }
+
+    location /webcam2/ {
+        postpone_output 0;
+        proxy_buffering off;
+        proxy_ignore_headers X-Accel-Buffering;
+        access_log off;
+        error_log off;
+        proxy_pass http://mjpgstreamer2/;
+    }
+
+    location /webcam3/ {
+        postpone_output 0;
+        proxy_buffering off;
+        proxy_ignore_headers X-Accel-Buffering;
+        access_log off;
+        error_log off;
+        proxy_pass http://mjpgstreamer3/;
+    }
+
+    location /webcam4/ {
+        postpone_output 0;
+        proxy_buffering off;
+        proxy_ignore_headers X-Accel-Buffering;
+        access_log off;
+        error_log off;
+        proxy_pass http://mjpgstreamer4/;
+    }
+}

resources/moonraker.conf

@@ -0,0 +1,56 @@
+[server]
+host: 0.0.0.0
+port: %PORT%
+enable_debug_logging: False
+klippy_uds_address: %UDS%
+
+[database]
+database_path: %MR_DB%
+
+[authorization]
+trusted_clients:
+    %LAN%
+    10.0.0.0/8
+    127.0.0.0/8
+    169.254.0.0/16
+    172.16.0.0/12
+    192.168.0.0/16
+    FE80::/10
+    ::1/128
+cors_domains:
+    http://*.lan
+    http://*.local
+    https://my.mainsail.xyz
+    http://my.mainsail.xyz
+    https://app.fluidd.xyz
+    http://app.fluidd.xyz
+
+[file_manager]
+config_path: %CFG%
+log_path: %LOG%
+
+[octoprint_compat]
+
+[history]
+
+[update_manager]
+channel: dev
+refresh_interval: 168
+
+[update_manager mainsail]
+type: web
+repo: mainsail-crew/mainsail
+path: ~/mainsail
+
+[update_manager fluidd]
+type: web
+repo: fluidd-core/fluidd
+path: ~/fluidd
+
+#[update_manager KlipperScreen]
+#type: git_repo
+#path: /home/%USER%/KlipperScreen
+#origin: https://github.com/jordanruthe/KlipperScreen.git
+#env: /home/%USER%/.KlipperScreen-env/bin/python
+#requirements: scripts/KlipperScreen-requirements.txt
+#install_script: scripts/KlipperScreen-install.sh

resources/moonraker.service

@@ -0,0 +1,16 @@
+#Systemd service file for moonraker
+[Unit]
+Description=Starts Moonraker %INST% on startup
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+Type=simple
+SupplementaryGroups=moonraker-admin
+User=%USER%
+RemainAfterExit=yes
+ExecStart=%MR_ENV%/bin/python %MR_DIR%/moonraker/moonraker.py -l %MR_LOG% -c %MR_CONF%
+Restart=always
+RestartSec=10

resources/octoprint_nginx.cfg

@@ -0,0 +1,40 @@
+map $http_upgrade $connection_upgrade {
+    default upgrade;
+    '' close;
+}
+
+upstream octoprint {
+    server 127.0.0.1:5000;
+}
+
+upstream mjpg-streamer {
+    server 127.0.0.1:8080;
+}
+
+server {
+    listen 80;
+    #listen [::]:80;
+
+    location / {
+        proxy_pass http://octoprint/;
+        proxy_set_header Host $http_host;
+        proxy_set_header Upgrade $http_upgrade;
+        proxy_set_header Connection "upgrade";
+        proxy_set_header X-Real-IP $remote_addr;
+        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+        proxy_set_header X-Scheme $scheme;
+        #proxy_set_header X-Script-Name /;
+        proxy_http_version 1.1;
+        client_max_body_size 0;
+    }
+
+    location /webcam {
+        proxy_pass http://mjpg-streamer/;
+    }
+
+    # redirect server error pages to the static page /50x.html
+    error_page   500 502 503 504  /50x.html;
+    location = /50x.html {
+        root   html;
+    }
+}

resources/printer.cfg

@@ -0,0 +1,14 @@
+[mcu]
+serial: /dev/serial/by-id/<your-mcu-id>
+
+[pause_resume]
+
+[display_status]
+
+[virtual_sdcard]
+path: ~/gcode_files
+
+[printer]
+kinematics: none
+max_velocity: 1000
+max_accel: 1000

resources/shell_command.cfg

@@ -0,0 +1,7 @@
+[gcode_shell_command hello_world]
+command: echo hello world
+timeout: 2.
+verbose: True
+[gcode_macro HELLO_WORLD]
+gcode:
+    RUN_SHELL_COMMAND CMD=hello_world

resources/upstreams.conf

@@ -0,0 +1,25 @@
+# /etc/nginx/conf.d/upstreams.conf
+upstream apiserver {
+    ip_hash;
+    server 127.0.0.1:7125;
+}
+
+upstream mjpgstreamer1 {
+    ip_hash;
+    server 127.0.0.1:8080;
+}
+
+upstream mjpgstreamer2 {
+    ip_hash;
+    server 127.0.0.1:8081;
+}
+
+upstream mjpgstreamer3 {
+    ip_hash;
+    server 127.0.0.1:8082;
+}
+
+upstream mjpgstreamer4 {
+    ip_hash;
+    server 127.0.0.1:8083;
+}

resources/webcamd.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=Starts mjpg-streamer on startup
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+Type=forking
+User=%USER%
+WorkingDirectory=/usr/local/bin
+StandardOutput=append:/var/log/webcamd.log
+StandardError=append:/var/log/webcamd.log
+ExecStart=/usr/local/bin/webcamd
+Restart=always

scripts/backup.sh

@@ -1,19 +1,33 @@
-backup_printer_cfg(){
+check_for_backup_dir(){
   if [ ! -d $BACKUP_DIR ]; then
-    status_msg "Create backup directory ..."
+    status_msg "Create KIAUH backup directory ..."
     mkdir -p $BACKUP_DIR && ok_msg "Directory created!"
   fi
-  if [ -f $PRINTER_CFG ]; then
-    get_date
-    status_msg "Create backup of printer.cfg ..."
-    cp $PRINTER_CFG $BACKUP_DIR/printer.cfg."$current_date".backup && ok_msg "Backup created!"
-  else
-    ok_msg "No printer.cfg found! Skipping backup ..."
+}
+
+toggle_backups(){
+  source_kiauh_ini
+  if [ "$backup_before_update" = "true" ]; then
+    sed -i '/backup_before_update=/s/true/false/' $INI_FILE
+    BB4U_STATUS="${green}[Enable]${default} backups before updating                  "
+    CONFIRM_MSG=" Backups before updates are now >>> DISABLED <<< !"
+  fi
+  if [ "$backup_before_update" = "false" ]; then
+    sed -i '/backup_before_update=/s/false/true/' $INI_FILE
+    BB4U_STATUS="${red}[Disable]${default} backups before updating                 "
+    CONFIRM_MSG=" Backups before updates are now >>> ENABLED <<< !"
+  fi
+}
+
+bb4u(){
+  source_kiauh_ini
+  if [ "$backup_before_update" = "true" ]; then
+    backup_$1
   fi
 }
 
 read_bb4u_stat(){
-  source_ini
+  source_kiauh_ini
   if [ ! "$backup_before_update" = "true" ]; then
     BB4U_STATUS="${green}[Enable]${default} backups before updating                  "
   else
@@ -21,54 +35,161 @@ read_bb4u_stat(){
   fi
 }
 
-toggle_backups(){
-  source_ini
-  if [ "$backup_before_update" = "true" ]; then
-    sed -i '/backup_before_update=/s/true/false/' ${HOME}/kiauh2/kiauh.ini
-    BB4U_STATUS="${green}[Enable]${default} backups before updating                  "
-  fi
-  if [ "$backup_before_update" = "false" ]; then
-    sed -i '/backup_before_update=/s/false/true/' ${HOME}/kiauh2/kiauh.ini
-    BB4U_STATUS="${red}[Disable]${default} backups before updating                 "
+################################################################################
+#******************************************************************************#
+################################################################################
+
+backup_printer_cfg(){
+  check_for_backup_dir
+  if [ -f $PRINTER_CFG ]; then
+    get_date
+    status_msg "Timestamp: $current_date"
+    status_msg "Create backup of printer.cfg ..."
+    cp $PRINTER_CFG $BACKUP_DIR/printer.cfg."$current_date".backup && ok_msg "Backup complete!"
+  else
+    ok_msg "No printer.cfg found! Skipping backup ..."
   fi
 }
 
-bb4u_klipper(){
-  source_ini
-  if [ -d $KLIPPER_DIR ] && [ "$backup_before_update" = "true" ]; then
+backup_klipper_config_dir(){
+  source_kiauh_ini
+  check_for_backup_dir
+  if [ -d "$klipper_cfg_loc" ]; then
     get_date
+    status_msg "Timestamp: $current_date"
+    status_msg "Create backup of the Klipper config directory ..."
+    config_folder_name="$(echo "$klipper_cfg_loc" | rev | cut -d"/" -f1 | rev)"
+    mkdir -p $BACKUP_DIR/$config_folder_name/$current_date
+    cp -r "$klipper_cfg_loc" "$_" && ok_msg "Backup complete!"
+    echo
+  else
+    ok_msg "No config directory found! Skipping backup ..."
+    echo
+  fi
+}
+
+backup_moonraker_database(){
+  check_for_backup_dir
+  if ls -d ${HOME}/.moonraker_database* 2>/dev/null 1>&2; then
+    get_date
+    status_msg "Timestamp: $current_date"
+    mkdir -p "$BACKUP_DIR/mr_db_backup/$current_date"
+    for database in $(ls -d ${HOME}/.moonraker_database*)
+    do
+      status_msg "Create backup of $database ..."
+      cp -r $database "$BACKUP_DIR/mr_db_backup/$current_date"
+      ok_msg "Done!"
+    done
+    ok_msg "Backup complete!\n"
+  else
+    ok_msg "No Moonraker database found! Skipping backup ..."
+  fi
+}
+
+backup_klipper(){
+  if [ -d $KLIPPER_DIR ] && [ -d $KLIPPY_ENV ]; then
     status_msg "Creating Klipper backup ..."
+    check_for_backup_dir
+    get_date
+    status_msg "Timestamp: $current_date"
     mkdir -p $BACKUP_DIR/klipper-backups/"$current_date"
-    cp -r $KLIPPER_DIR $_ && cp -r $KLIPPY_ENV_DIR $_ && ok_msg "Backup complete!"
+    cp -r $KLIPPER_DIR $_ && cp -r $KLIPPY_ENV $_ && ok_msg "Backup complete!"
+  else
+    ERROR_MSG=" Can't backup klipper and/or klipper-env directory! Not found!"
   fi
 }
 
-bb4u_dwc2fk(){
-  source_ini
-  if [ -d $DWC2FK_DIR ] && [ "$backup_before_update" = "true" ]; then
-    get_date
-    status_msg "Creating DWC2-for-Klipper backup ..."
-    mkdir -p $BACKUP_DIR/dwc2-for-klipper-backups/"$current_date"
-    cp -r $DWC2FK_DIR $_ && ok_msg "Backup complete!"
-  fi
-}
-
-bb4u_dwc2(){
-  source_ini
-  if [ -d $DWC2_DIR ] && [ "$backup_before_update" = "true" ]; then
-    get_date
+backup_dwc2(){
+  if [ -d $DWC2FK_DIR ] && [ -d $DWC_ENV_DIR ] && [ -d $DWC2_DIR ]; then
     status_msg "Creating DWC2 Web UI backup ..."
+    check_for_backup_dir
+    get_date
+    status_msg "Timestamp: $current_date"
     mkdir -p $BACKUP_DIR/dwc2-backups/"$current_date"
-    cp -r $DWC2_DIR $_ && ok_msg "Backup complete!"
+    cp -r $DWC2FK_DIR $_ && cp -r $DWC_ENV_DIR $_ && cp -r $DWC2_DIR $_
+    ok_msg "Backup complete!"
+  else
+    ERROR_MSG=" Can't backup dwc2-for-klipper-socket and/or dwc2 directory!\n Not found!"
   fi
 }
 
-bb4u_mainsail(){
-  source_ini
-  if [ -d $MAINSAIL_DIR ] && [ "$backup_before_update" = "true" ]; then
-    get_date
+backup_mainsail(){
+  if [ -d $MAINSAIL_DIR ]; then
     status_msg "Creating Mainsail backup ..."
+    check_for_backup_dir
+    get_date
+    status_msg "Timestamp: $current_date"
     mkdir -p $BACKUP_DIR/mainsail-backups/"$current_date"
     cp -r $MAINSAIL_DIR $_ && ok_msg "Backup complete!"
+  else
+    ERROR_MSG=" Can't backup mainsail directory! Not found!"
   fi
-}
+}
+
+backup_fluidd(){
+  if [ -d $FLUIDD_DIR ]; then
+    status_msg "Creating Fluidd backup ..."
+    check_for_backup_dir
+    get_date
+    status_msg "Timestamp: $current_date"
+    mkdir -p $BACKUP_DIR/fluidd-backups/"$current_date"
+    cp -r $FLUIDD_DIR $_ && ok_msg "Backup complete!"
+  else
+    ERROR_MSG=" Can't backup fluidd directory! Not found!"
+  fi
+}
+
+backup_moonraker(){
+  if [ -d $MOONRAKER_DIR ] && [ -d $MOONRAKER_ENV ]; then
+    status_msg "Creating Moonraker backup ..."
+    check_for_backup_dir
+    get_date
+    status_msg "Timestamp: $current_date"
+    mkdir -p $BACKUP_DIR/moonraker-backups/"$current_date"
+    cp -r $MOONRAKER_DIR $_ && cp -r $MOONRAKER_ENV $_ && ok_msg "Backup complete!"
+  else
+    ERROR_MSG=" Can't backup moonraker and/or moonraker-env directory! Not found!"
+  fi
+}
+
+backup_octoprint(){
+  if [ -d $OCTOPRINT_DIR ] && [ -d $OCTOPRINT_CFG_DIR ]; then
+    status_msg "Creating OctoPrint backup ..."
+    check_for_backup_dir
+    get_date
+    status_msg "Timestamp: $current_date"
+    mkdir -p $BACKUP_DIR/octoprint-backups/"$current_date"
+    cp -r $OCTOPRINT_DIR $_ && cp -r $OCTOPRINT_CFG_DIR $_
+    ok_msg "Backup complete!"
+  else
+    ERROR_MSG=" Can't backup OctoPrint and/or .octoprint directory!\n Not found!"
+  fi
+}
+
+backup_klipperscreen(){
+  if [ -d $KLIPPERSCREEN_DIR ] ; then
+    status_msg "Creating KlipperScreen backup ..."
+    check_for_backup_dir
+    get_date
+    status_msg "Timestamp: $current_date"
+    mkdir -p $BACKUP_DIR/klipperscreen-backups/"$current_date"
+    cp -r $KLIPPERSCREEN_DIR $_
+    ok_msg "Backup complete!"
+  else
+    ERROR_MSG=" Can't backup KlipperScreen directory!\n Not found!"
+  fi
+}
+
+backup_MoonrakerTelegramBot(){
+  if [ -d $MOONRAKER_TELEGRAM_BOT_DIR ] ; then
+    status_msg "Creating MoonrakerTelegramBot backup ..."
+    check_for_backup_dir
+    get_date
+    status_msg "Timestamp: $current_date"
+    mkdir -p $BACKUP_DIR/MoonrakerTelegramBot-backups/"$current_date"
+    cp -r $MOONRAKER_TELEGRAM_BOT_DIR $_
+    ok_msg "Backup complete!"
+  else
+    ERROR_MSG=" Can't backup MoonrakerTelegramBot directory!\n Not found!"
+  fi
+}

scripts/dwc2-for-klipper-socket-installer/dwc-start.sh

@@ -0,0 +1,54 @@
+#!/bin/sh
+# System startup script for dwc2-for-klipper-socket
+
+### BEGIN INIT INFO
+# Provides:          dwc2-for-klipper-socket
+# Required-Start:    $local_fs
+# Required-Stop:
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: dwc2-for-klipper-socket daemon
+# Description:       Starts the dwc2-for-klipper-socket daemon.
+### END INIT INFO
+
+PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+DESC="dwc2-for-klipper-socket daemon"
+NAME="dwc2-for-klipper-socket"
+DEFAULTS_FILE=/etc/default/dwc
+PIDFILE=/var/run/dwc.pid
+
+. /lib/lsb/init-functions
+
+# Read defaults file
+[ -r $DEFAULTS_FILE ] && . $DEFAULTS_FILE
+
+case "$1" in
+start)  log_daemon_msg "Starting dwc2-for-klipper-socket" $NAME
+        start-stop-daemon --start --quiet --exec $DWC_EXEC \
+                          --background --pidfile $PIDFILE --make-pidfile \
+                          --chuid $DWC_USER --user $DWC_USER \
+                          -- $DWC_ARGS
+        log_end_msg $?
+        ;;
+stop)   log_daemon_msg "Stopping dwc2-for-klipper-socket" $NAME
+        killproc -p $PIDFILE $DWC_EXEC
+        RETVAL=$?
+        [ $RETVAL -eq 0 ] && [ -e "$PIDFILE" ] && rm -f $PIDFILE
+        log_end_msg $RETVAL
+        ;;
+restart) log_daemon_msg "Restarting dwc2-for-klipper-socket" $NAME
+        $0 stop
+        $0 start
+        ;;
+reload|force-reload)
+        log_daemon_msg "Reloading configuration not supported" $NAME
+        log_end_msg 1
+        ;;
+status)
+        status_of_proc -p $PIDFILE $DWC_EXEC $NAME && exit 0 || exit $?
+        ;;
+*)      log_action_msg "Usage: /etc/init.d/dwc {start|stop|status|restart|reload|force-reload}"
+        exit 2
+        ;;
+esac
+exit 0

scripts/dwc2-for-klipper-socket-installer/install-debian.sh

@@ -0,0 +1,106 @@
+#!/bin/bash
+# This script installs dwc2-for-klipper-socket on a Raspberry Pi machine running
+# Raspbian/Raspberry Pi OS based distributions.
+
+# https://github.com/Stephan3/dwc2-for-klipper-socket.git
+
+PYTHONDIR="${HOME}/dwc-env"
+SYSTEMDDIR="/etc/systemd/system"
+DWC_USER=${USER}
+
+# Step 1:  Verify Klipper has been installed
+check_klipper()
+{
+    if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "klipper.service")" ]; then
+        echo "Klipper service found!"
+    else
+        echo "Klipper service not found, please install Klipper first"
+        exit -1
+    fi
+
+}
+
+# Step 2: Install packages
+install_packages()
+{
+    PKGLIST="python3-virtualenv python3-dev python3-tornado"
+
+    # Update system package info
+    report_status "Running apt-get update..."
+    sudo apt-get update --allow-releaseinfo-change
+
+    # Install desired packages
+    report_status "Installing packages..."
+    sudo apt-get install --yes ${PKGLIST}
+}
+
+# Step 3: Create python virtual environment
+create_virtualenv()
+{
+    report_status "Updating python virtual environment..."
+
+    # Create virtualenv if it doesn't already exist
+    [ ! -d ${PYTHONDIR} ] && virtualenv -p /usr/bin/python3 ${PYTHONDIR}
+
+    # Install/update dependencies
+    ${PYTHONDIR}/bin/pip install tornado==6.0.4
+}
+
+# Step 4: Install startup script
+install_script(){
+    report_status "Installing system start script..."
+    sudo /bin/sh -c "cat > $SYSTEMDDIR/dwc.service" << EOF
+#Systemd service file for DWC
+[Unit]
+Description=dwc_webif
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+Type=simple
+User=$DWC_USER
+RemainAfterExit=yes
+ExecStart=${PYTHONDIR}/bin/python3 ${SRCDIR}/web_dwc2.py
+Restart=always
+RestartSec=10
+EOF
+# Use systemctl to enable the klipper systemd service script
+    sudo systemctl enable dwc.service
+}
+
+# Step 5: Start DWC service
+start_software()
+{
+    report_status "Launching dwc2-for-klipper-socket..."
+    sudo systemctl start dwc
+}
+
+# Helper functions
+report_status()
+{
+    echo -e "\n\n###### $1"
+}
+
+verify_ready()
+{
+    if [ "$EUID" -eq 0 ]; then
+        echo "This script must not run as root"
+        exit -1
+    fi
+}
+
+# Force script to exit if an error occurs
+set -e
+
+# Find SRCDIR from the pathname of this script
+SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
+
+# Run installation steps defined above
+verify_ready
+check_klipper
+install_packages
+create_virtualenv
+install_script
+start_software

scripts/dwc2-for-klipper-socket-installer/install-octopi.sh

@@ -0,0 +1,106 @@
+#!/bin/bash
+# This script installs dwc2-for-klipper-socket on a Raspberry Pi machine running
+# Raspbian/Raspberry Pi OS based distributions.
+
+# https://github.com/Stephan3/dwc2-for-klipper-socket.git
+
+PYTHONDIR="${HOME}/dwc-env"
+
+# Step 1:  Verify Klipper has been installed
+check_klipper()
+{
+    if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "klipper.service")" ]; then
+        echo "Klipper service found!"
+    else
+        echo "Klipper service not found, please install Klipper first"
+        exit -1
+    fi
+
+}
+
+# Step 2: Install packages
+install_packages()
+{
+    PKGLIST="python3-virtualenv python3-dev python3-tornado"
+
+    # Update system package info
+    report_status "Running apt-get update..."
+    sudo apt-get update --allow-releaseinfo-change
+
+    # Install desired packages
+    report_status "Installing packages..."
+    sudo apt-get install --yes ${PKGLIST}
+}
+
+# Step 3: Create python virtual environment
+create_virtualenv()
+{
+    report_status "Updating python virtual environment..."
+
+    # Create virtualenv if it doesn't already exist
+    [ ! -d ${PYTHONDIR} ] && virtualenv -p /usr/bin/python3 ${PYTHONDIR}
+
+    # Install/update dependencies
+    ${PYTHONDIR}/bin/pip install tornado==6.0.4
+}
+
+# Step 4: Install startup script
+install_script(){
+    report_status "Installing system start script..."
+    sudo cp "${SRCDIR}/scripts/dwc-start.sh" /etc/init.d/dwc
+    sudo update-rc.d dwc defaults
+}
+
+# Step 5: Install startup script config
+install_config(){
+    DEFAULTS_FILE=/etc/default/dwc
+    [ -f $DEFAULTS_FILE ] && return
+
+    report_status "Installing system start configuration..."
+    sudo /bin/sh -c "cat > $DEFAULTS_FILE" <<EOF
+# Configuration for /etc/init.d/dwc
+DWC_USER=$USER
+
+DWC_EXEC=${PYTHONDIR}/bin/python3
+
+DWC_ARGS="${SRCDIR}/web_dwc2.py"
+EOF
+}
+
+# Step 4: Start server
+start_software()
+{
+    report_status "Launching dwc2-for-klipper-socket..."
+    sudo /etc/init.d/klipper stop
+    sudo /etc/init.d/dwc restart
+    sudo /etc/init.d/klipper start
+}
+
+# Helper functions
+report_status()
+{
+    echo -e "\n\n###### $1"
+}
+
+verify_ready()
+{
+    if [ "$EUID" -eq 0 ]; then
+        echo "This script must not run as root"
+        exit -1
+    fi
+}
+
+# Force script to exit if an error occurs
+set -e
+
+# Find SRCDIR from the pathname of this script
+SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
+
+# Run installation steps defined above
+verify_ready
+check_klipper
+install_packages
+create_virtualenv
+install_script
+install_config
+start_software

scripts/dwc2-for-klipper-socket-installer/uninstall-debian.sh

@@ -0,0 +1,41 @@
+stop_service() {
+    # Stop DWC Service
+    echo "#### Stopping DWC Service.."
+    sudo systemctl stop dwc
+    sudo systemctl disable dwc
+}
+
+remove_service() {
+    # Remove DWC from Services
+    echo
+    echo "#### Removing DWC Service.."
+    sudo rm -f /etc/systemd/system/dwc.service
+    sudo systemctl daemon-reload
+}
+
+remove_files() {
+    # Remove virtualenv
+    if [ -d ~/dwc-env ]; then
+        echo "Removing virtualenv..."
+        rm -rf ~/dwc-env
+    else
+        echo "No DWC virtualenv found"
+    fi
+
+    # Notify user of method to remove DWC source code
+    echo
+    echo "The DWC system files and virtualenv have been removed."
+}
+
+verify_ready()
+{
+    if [ "$EUID" -eq 0 ]; then
+        echo "This script must not run as root"
+        exit -1
+    fi
+}
+
+verify_ready
+stop_service
+remove_service
+remove_files

scripts/dwc2-for-klipper-socket-installer/uninstall-octopi.sh

@@ -0,0 +1,45 @@
+stop_service() {
+    # Stop DWC Service
+    echo "#### Stopping DWC Service.."
+    sudo service dwc stop
+}
+
+remove_service() {
+    # Remove DWC from Startup
+    echo
+    echo "#### Removing DWC from Startup.."
+    sudo update-rc.d -f dwc remove
+
+    # Remove DWC from Services
+    echo
+    echo "#### Removing DWC Service.."
+    sudo rm -f /etc/init.d/dwc /etc/default/dwc
+
+}
+
+remove_files() {
+    # Remove virtualenv
+    if [ -d ~/dwc-env ]; then
+        echo "Removing virtualenv..."
+        rm -rf ~/dwc-env
+    else
+        echo "No DWC virtualenv found"
+    fi
+
+    # Notify user of method to remove DWC source code
+    echo
+    echo "The DWC system files and virtualenv have been removed."
+}
+
+verify_ready()
+{
+    if [ "$EUID" -eq 0 ]; then
+        echo "This script must not run as root"
+        exit -1
+    fi
+}
+
+verify_ready
+stop_service
+remove_service
+remove_files

scripts/flash_mcu.sh

@@ -0,0 +1,334 @@
+#!/bin/bash
+
+show_flash_method_help(){
+  top_border
+  echo -e "|     ~~~~~~~~ < ? > Help: Flash MCU < ? > ~~~~~~~~     |"
+  hr
+  echo -e "| ${cyan}Regular flashing method:${default}                              |"
+  echo -e "| The default method to flash controller boards which   |"
+  echo -e "| are connected and updated over USB and not by placing |"
+  echo -e "| a compiled firmware file onto an internal SD-Card.    |"
+  blank_line
+  echo -e "| Common controllers that get flashed that way are:     |"
+  echo -e "| - Arduino Mega 2560                                   |"
+  echo -e "| - Fysetc F6 / S6 (used without a Display + SD-Slot)   |"
+  blank_line
+  echo -e "| ${cyan}Updating via SD-Card Update:${default}                          |"
+  echo -e "| Many popular controller boards ship with a bootloader |"
+  echo -e "| capable of updating the firmware via SD-Card.         |"
+  echo -e "| Choose this method if your controller board supports  |"
+  echo -e "| this way of updating. This method ONLY works for up-  |"
+  echo -e "| grading firmware. The initial flashing procedure must |"
+  echo -e "| be done manually per the instructions that apply to   |"
+  echo -e "| your controller board.                                |"
+  blank_line
+  echo -e "| Common controllers that can be flashed that way are:  |"
+  echo -e "| - BigTreeTech SKR 1.3 / 1.4 (Turbo) / E3 / Mini E3    |"
+  echo -e "| - Fysetc F6 / S6 (used with a Display + SD-Slot)      |"
+  echo -e "| - Fysetc Spider                                       |"
+  blank_line
+  back_footer
+  while true; do
+    read -p "${cyan}###### Please select:${default} " choice
+    case "$choice" in
+      B|b)
+        clear && print_header
+        select_flash_method
+        break;;
+      *)
+        print_unkown_cmd
+        print_msg && clear_msg;;
+    esac
+  done
+}
+
+select_flash_method(){
+  top_border
+  echo -e "|        ~~~~~~~~~~~~ [ Flash MCU ] ~~~~~~~~~~~~        |"
+  hr
+  echo -e "| Please select the flashing method to flash your MCU.  |"
+  echo -e "| Make sure to only select a method your MCU supports.  |"
+  echo -e "| Not all MCUs support both methods!                    |"
+  hr
+  blank_line
+  echo -e "| 1) Regular flashing method                            |"
+  echo -e "| 2) Updating via SD-Card Update                        |"
+  blank_line
+  back_help_footer
+  while true; do
+    read -p "${cyan}###### Please select:${default} " choice
+    case "$choice" in
+      1)
+        echo -e "###### > Regular flashing method"
+        select_mcu_connection
+        select_mcu_id
+        [[ "$CONFIRM_FLASH" == true ]] && flash_mcu
+        break;;
+      2)
+        echo -e "###### > SD-Card Update"
+        select_mcu_connection
+        select_mcu_id
+        [[ "$CONFIRM_FLASH" == true ]] && flash_mcu_sd
+        break;;
+      B|b)
+        advanced_menu
+        break;;
+      H|h)
+        clear && print_header
+        show_flash_method_help
+        break;;
+      *)
+        print_unkown_cmd
+        print_msg && clear_msg;;
+    esac
+  done
+}
+
+select_mcu_id(){
+  if [ ${#mcu_list[@]} -ge 1 ]; then
+    top_border
+    echo -e "|                   ${red}!!! ATTENTION !!!${default}                   |"
+    hr
+    echo -e "| Make sure, to select the correct MCU!                 |"
+    echo -e "| ${red}ONLY flash a firmware created for the respective MCU!${default} |"
+    bottom_border
+    echo -e "${cyan}###### List of available MCU:${default}"
+    ### list all mcus
+    id=0
+    for mcu in ${mcu_list[@]}; do
+      let id++
+      echo -e " $id) $mcu"
+    done
+    ### verify user input
+    sel_index=""
+    while [[ ! ($sel_index =~ ^[1-9]+$) ]] || [ "$sel_index" -gt "$id" ]; do
+      echo
+      read -p "${cyan}###### Select MCU to flash:${default} " sel_index
+      if [[ ! ($sel_index =~ ^[1-9]+$) ]]; then
+        warn_msg "Invalid input!"
+      elif [ "$sel_index" -lt 1 ] || [ "$sel_index" -gt "$id" ]; then
+        warn_msg "Please select a number between 1 and $id!"
+      fi
+      mcu_index=$(echo $((sel_index - 1)))
+      selected_mcu_id="${mcu_list[$mcu_index]}"
+    done
+    ### confirm selection
+    while true; do
+      echo -e "\n###### You selected:\n ● MCU #$sel_index: $selected_mcu_id\n"
+      read -p "${cyan}###### Continue? (Y/n):${default} " yn
+      case "$yn" in
+        Y|y|Yes|yes|"")
+          echo -e "###### > Yes"
+          status_msg "Flashing $selected_mcu_id ..."
+          CONFIRM_FLASH=true
+          break;;
+        N|n|No|no)
+          echo -e "###### > No"
+          CONFIRM_FLASH=false
+          break;;
+        *)
+          print_unkown_cmd
+          print_msg && clear_msg;;
+      esac
+    done
+  fi
+}
+
+flash_mcu(){
+  do_action_service "stop" "klipper"
+  make flash FLASH_DEVICE="${mcu_list[$mcu_index]}"
+  ### evaluate exit code of make flash
+  if [ ! $? -eq 0 ]; then
+    warn_msg "Flashing failed!"
+    warn_msg "Please read the console output above!"
+  else
+    ok_msg "Flashing successfull!"
+  fi
+  do_action_service "start" "klipper"
+}
+
+flash_mcu_sd(){
+  flash_script="${HOME}/klipper/scripts/flash-sdcard.sh"
+
+  ### write each supported board to the array to make it selectable
+  board_list=()
+  for board in $("$flash_script" -l | tail -n +2); do
+    board_list+=($board)
+  done
+
+  i=0
+  top_border
+  echo -e "|  Please select the type of board that corresponds to  |"
+  echo -e "|  the currently selected MCU ID you chose before.      |"
+  blank_line
+  echo -e "|  The following boards are currently supported:        |"
+  hr
+  ### display all supported boards to the user
+  for board in ${board_list[@]}; do
+    if [ $i -lt 10 ]; then
+      printf "|  $i) %-50s|\n" "${board_list[$i]}"
+    else
+      printf "|  $i) %-49s|\n" "${board_list[$i]}"
+    fi
+    i=$((i + 1))
+  done
+  quit_footer
+
+  ### make the user select one of the boards
+  while true; do
+    read -p "${cyan}###### Please select board type:${default} " choice
+    if [ "$choice" = "q" ] || [ "$choice" = "Q" ]; then
+      clear && advanced_menu && break
+    elif [ "$choice" -le ${#board_list[@]} ]; then
+      selected_board="${board_list[$choice]}"
+      break
+    else
+      clear && print_header
+      ERROR_MSG="Invalid choice!" && print_msg && clear_msg
+      flash_mcu_sd
+    fi
+  done
+
+  while true; do
+    top_border
+    echo -e "| If your board is flashed with firmware that connects  |"
+    echo -e "| at a custom baud rate, please change it now.          |"
+    blank_line
+    echo -e "| If you are unsure, stick to the default 250000!       |"
+    bottom_border
+    echo -e "${cyan}###### Please set the baud rate:${default} "
+    unset baud_rate
+    while [[ ! $baud_rate =~ ^[0-9]+$ ]]; do
+      read -e -i "250000" -e baud_rate
+      selected_baud_rate=$baud_rate
+      break
+    done
+    break
+  done
+
+  ###flash process
+  do_action_service "stop" "klipper"
+  "$flash_script" -b "$selected_baud_rate" "$selected_mcu_id" "$selected_board"
+  ### evaluate exit code of flash-sdcard.sh execution
+  if [ ! $? -eq 0 ]; then
+    warn_msg "Flashing failed!"
+    warn_msg "Please read the console output above!"
+  else
+    ok_msg "Flashing successfull!"
+  fi
+  do_action_service "start" "klipper"
+}
+
+build_fw(){
+  if [ -d "$KLIPPER_DIR" ]; then
+    cd "$KLIPPER_DIR"
+    status_msg "Initializing firmware build ..."
+    dep=(build-essential dpkg-dev make)
+    dependency_check
+    make clean && make menuconfig
+    status_msg "Building firmware ..."
+    make && ok_msg "Firmware built!"
+  else
+    ERROR_MSG="Klipper was not found!\n Can not build firmware without Klipper!"
+    print_msg && clear_msg && return 1
+  fi
+}
+
+select_mcu_connection(){
+  echo
+  top_border
+  echo -e "| ${yellow}Make sure to have the controller board connected now!${default} |"
+  blank_line
+  echo -e "| How is the controller board connected to the host?    |"
+  echo -e "| 1) USB                                                |"
+  echo -e "| 2) UART                                               |"
+  bottom_border
+  while true; do
+    read -p "${cyan}###### Connection method:${default} " choice
+    case "$choice" in
+      1)
+        retrieve_id "USB"
+        break;;
+      2)
+        retrieve_id "UART"
+        break;;
+      *)
+        print_unkown_cmd
+        print_msg && clear_msg;;
+    esac
+  done
+  unset mcu_count
+
+  if [[ "${#mcu_list[@]}" -lt 1 ]]; then
+    warn_msg "No MCU found!"
+    warn_msg "MCU not plugged in or not detectable!"
+    echo
+  fi
+}
+
+retrieve_id(){
+  status_msg "Identifying MCU ..."
+  sleep 1
+  mcu_list=()
+  mcu_count=1
+  [ "$1" = "USB" ] && path="/dev/serial/by-id/*"
+  [ "$1" = "UART" ] && path="/dev/ttyAMA0"
+  if [[ "$(ls $path)" != "" ]] ; then
+    for mcu in $path; do
+      declare "mcu_id_$mcu_count"="$mcu"
+      mcu_id="mcu_id_$mcu_count"
+      mcu_list+=("${!mcu_id}")
+      echo -e " ● ($1) MCU #$mcu_count: ${cyan}$mcu${default}\n"
+      let mcu_count++
+    done
+  fi 2>/dev/null
+}
+
+check_usergroup_dialout(){
+  if grep -q "dialout" </etc/group && ! grep -q "dialout" <(groups "${USER}"); then
+    group_dialout=false
+  else
+    group_dialout=true
+  fi
+  if grep -q "tty" </etc/group && ! grep -q "tty" <(groups "${USER}"); then
+    group_tty=false
+  else
+    group_tty=true
+  fi
+  if [ "$group_dialout" == "false" ] || [ "$group_tty" == "false" ] ; then
+    top_border
+    echo -e "| ${yellow}WARNING: Your current user is not in group:${default}           |"
+    [ "$group_tty" == "false" ] && echo -e "| ${yellow}● tty${default}                                                 |"
+    [ "$group_dialout" == "false" ] && echo -e "| ${yellow}● dialout${default}                                             |"
+    blank_line
+    echo -e "| It is possible that you won't be able to successfully |"
+    echo -e "| flash without your user being a member of that group. |"
+    echo -e "| If you want to add the current user to the group(s)   |"
+    echo -e "| listed above, answer with 'Y'. Else skip with 'n'.    |"
+    blank_line
+    echo -e "| ${yellow}INFO:${default}                                                 |"
+    echo -e "| ${yellow}Relog required for group assignments to take effect!${default}  |"
+    bottom_border
+    while true; do
+      read -p "${cyan}###### Add user '${USER}' to group(s) now? (Y/n):${default} " yn
+      case "$yn" in
+        Y|y|Yes|yes|"")
+          echo -e "###### > Yes"
+          status_msg "Adding user '${USER}' to group(s) ..."
+          if [ "$group_tty" == "false" ]; then
+            sudo usermod -a -G tty "${USER}" && ok_msg "Group 'tty' assigned!"
+          fi
+          if [ "$group_dialout" == "false" ]; then
+            sudo usermod -a -G dialout "${USER}" && ok_msg "Group 'dialout' assigned!"
+          fi
+          ok_msg "You need to relog/restart for the group(s) to be applied!" && exit 0;;
+        N|n|No|no)
+          echo -e "###### > No"
+          break;;
+        *)
+          print_unkown_cmd
+          print_msg && clear_msg;;
+      esac
+    done
+  fi
+}

scripts/functions.sh

@@ -1,66 +1,261 @@
+### base variables
+SYSTEMDDIR="/etc/systemd/system"
+
 # setting up some frequently used functions
 check_euid(){
   if [ "$EUID" -eq 0 ]
   then
     echo -e "${red}"
-    echo -e "/=================================================\ "
-    echo -e "|    !!! THIS SCRIPT MUST NOT RAN AS ROOT !!!     |"
-    echo -e "\=================================================/ "
+    top_border
+    echo -e "|       !!! THIS SCRIPT MUST NOT RAN AS ROOT !!!        |"
+    bottom_border
     echo -e "${default}"
     exit 1
   fi
 }
 
-source_ini(){
-  source ${HOME}/kiauh2/kiauh.ini
-}
-
-start_klipper(){
-  if [ -e /etc/init.d/klipper ]; then
-    status_msg "Starting klipper service ..."
-    sudo /etc/init.d/klipper start && sleep 2 && ok_msg "Klipper service started!"
-  fi
-}
-stop_klipper(){
-  if [ -e /etc/init.d/klipper ]; then
-    status_msg "Stopping klipper service ..."
-    sudo /etc/init.d/klipper stop && sleep 2 && ok_msg "Klipper service stopped!"
+check_klipper_cfg_path(){
+  source_kiauh_ini
+  if [ -z $klipper_cfg_loc ]; then
+    echo
+    top_border
+    echo -e "|                    ${red}!!! WARNING !!!${default}                    |"
+    echo -e "|        ${red}No Klipper configuration directory set!${default}        |"
+    hr
+    echo -e "|  Before we can continue, KIAUH needs to know where    |"
+    echo -e "|  you want your printer configuration to be.           |"
+    blank_line
+    echo -e "|  Please specify a folder where your Klipper configu-  |"
+    echo -e "|  ration is stored or, if you don't have one yet, in   |"
+    echo -e "|  which it should be saved after the installation.     |"
+    bottom_border
+    change_klipper_cfg_path
   fi
 }
 
-start_moonraker(){
-  if [ -e /etc/init.d/moonraker ]; then
-    status_msg "Starting moonraker service ..."
-    sudo /etc/init.d/moonraker start && sleep 2 && ok_msg "Moonraker service started!"
-  fi
-}
-
-stop_moonraker(){
-  if [ -e /etc/init.d/moonraker ]; then
-    status_msg "Stopping moonraker service ..."
-    sudo /etc/init.d/moonraker stop && sleep 2 && ok_msg "Moonraker service stopped!"
-  fi
-}
-
-dep_check(){
-  for package in "${dep[@]}"
-  do
-    ! command -v $package >&/dev/null 2>&1 && install+=($package)
-  done
-  if ! [ ${#install[@]} -eq 0 ]; then
-  warn_msg "The following packages are missing but necessary:"
-  echo ${install[@]}
+change_klipper_cfg_path(){
+  source_kiauh_ini
+  old_klipper_cfg_loc="$klipper_cfg_loc"
+  EXAMPLE_FOLDER=$(printf "%s/your_config_folder" "${HOME}")
   while true; do
-    read -p "Do you want to install them now? (Y/n): " yn
+    top_border
+    echo -e "|  ${red}IMPORTANT:${default}                                           |"
+    echo -e "|  Please enter the new path in the following format:   |"
+    printf "|  ${yellow}%-51s${default}  |\n" "$EXAMPLE_FOLDER"
+    blank_line
+    echo -e "|  By default 'klipper_config' is recommended!          |"
+    bottom_border
+    echo
+    echo -e "${cyan}###### Please set the Klipper config directory:${default} "
+    if [ -z "$old_klipper_cfg_loc" ]; then
+      read -e -i "/home/${USER}/klipper_config" -e new_klipper_cfg_loc
+    else
+      read -e -i "$old_klipper_cfg_loc" -e new_klipper_cfg_loc
+    fi
+    echo
+    read -p "${cyan}###### Set config directory to '${yellow}$new_klipper_cfg_loc${cyan}' ? (Y/n):${default} " yn
     case "$yn" in
       Y|y|Yes|yes|"")
-      status_msg "Installing dependencies ..."
-      sudo apt-get install ${install[@]} -y && ok_msg "Dependencies installed!"
-      break;;
-      N|n|No|no) break;;
-         *) echo "Unknown parameter: $yn"; echo;;
+        echo -e "###### > Yes"
+
+        ### backup the old config dir
+        backup_klipper_config_dir
+
+        ### write new location to kiauh.ini
+        sed -i "s|klipper_cfg_loc=$old_klipper_cfg_loc|klipper_cfg_loc=$new_klipper_cfg_loc|" $INI_FILE
+        status_msg "Directory set to '$new_klipper_cfg_loc'!"
+
+        ### write new location to klipper and moonraker service
+        set_klipper_cfg_path
+        echo; ok_msg "Config directory changed!"
+        break;;
+      N|n|No|no)
+        echo -e "###### > No"
+        change_klipper_cfg_path
+        break;;
+      *)
+        print_unkown_cmd
+        print_msg && clear_msg;;
     esac
   done
+}
+
+set_klipper_cfg_path(){
+  ### stop services
+  do_action_service "stop" "klipper"
+  do_action_service "stop" "moonraker"
+
+  ### copy config files to new klipper config folder
+  if [ ! -z "$old_klipper_cfg_loc" ] && [ -d "$old_klipper_cfg_loc" ]; then
+    if [ ! -d "$new_klipper_cfg_loc" ]; then
+      status_msg "Copy config files to '$new_klipper_cfg_loc' ..."
+      mkdir -p "$new_klipper_cfg_loc"
+      cd $old_klipper_cfg_loc
+      cp -r -v ./* "$new_klipper_cfg_loc"
+      ok_msg "Done!"
+    fi
+  fi
+
+  SERVICE_FILES=$(find "$SYSTEMDDIR" -regextype posix-extended -regex "$SYSTEMDDIR/klipper(-[^0])+[0-9]*.service")
+  ### handle single klipper instance service file
+  if [ -f $SYSTEMDDIR/klipper.service ]; then
+    status_msg "Configuring Klipper for new path ..."
+    sudo sed -i -r "/ExecStart=/ s|klippy.py (.+)\/printer.cfg|klippy.py $new_klipper_cfg_loc/printer.cfg|" $SYSTEMDDIR/klipper.service
+    ok_msg "OK!"
+  elif [ -n "$SERVICE_FILES" ]; then
+    ### handle multi klipper instance service file
+    status_msg "Configuring Klipper for new path ..."
+    for service in $SERVICE_FILES; do
+      sudo sed -i -r "/ExecStart=/ s|klippy.py (.+)\/printer_|klippy.py $new_klipper_cfg_loc/printer_|" "$service"
+    done
+    ok_msg "OK!"
+  fi
+
+  SERVICE_FILES=$(find "$SYSTEMDDIR" -regextype posix-extended -regex "$SYSTEMDDIR/moonraker(-[^0])+[0-9]*.service")
+  ### handle single moonraker instance service and moonraker.conf file
+  if [ -f $SYSTEMDDIR/moonraker.service ]; then
+    status_msg "Configuring Moonraker for new path ..."
+    sudo sed -i -r "/ExecStart=/ s|-c (.+)\/moonraker\.conf|-c $new_klipper_cfg_loc/moonraker.conf|" $SYSTEMDDIR/moonraker.service
+
+    ### replace old file path with new one in moonraker.conf
+    sed -i -r "/config_path:/ s|config_path:.*|config_path: $new_klipper_cfg_loc|" $new_klipper_cfg_loc/moonraker.conf
+    ok_msg "OK!"
+  elif [ -n "$SERVICE_FILES" ]; then
+    ### handle multi moonraker instance service file
+    status_msg "Configuring Moonraker for new path ..."
+    for service in $SERVICE_FILES; do
+      sudo sed -i -r "/ExecStart=/ s|-c (.+)\/printer_|-c $new_klipper_cfg_loc/printer_|" "$service"
+    done
+    MR_CONFS=$(find "$new_klipper_cfg_loc" -regextype posix-extended -regex "$new_klipper_cfg_loc/printer_[1-9]+/moonraker.conf")
+    ### replace old file path with new one in moonraker.conf
+    for moonraker_conf in $MR_CONFS; do
+      loc=$(echo "$moonraker_conf" | rev | cut -d"/" -f2- | rev)
+      sed -i -r "/config_path:/ s|config_path:.*|config_path: $loc|" "$moonraker_conf"
+    done
+    ok_msg "OK!"
+  fi
+
+  ### reloading units
+  sudo systemctl daemon-reload
+
+  ### restart services
+  do_action_service "restart" "klipper"
+  do_action_service "restart" "moonraker"
+}
+
+source_kiauh_ini(){
+  source $INI_FILE
+}
+
+do_action_service(){
+  shopt -s extglob # enable extended globbing
+  SERVICES="$SYSTEMDDIR/$2?(-*([0-9])).service"
+  ### set a variable for the ok and status messages
+  [ "$1" == "start" ] && ACTION1="started" && ACTION2="Starting"
+  [ "$1" == "stop" ] && ACTION1="stopped" && ACTION2="Stopping"
+  [ "$1" == "restart" ] && ACTION1="restarted" && ACTION2="Restarting"
+  [ "$1" == "enable" ] && ACTION1="enabled" && ACTION2="Enabling"
+  [ "$1" == "disable" ] && ACTION1="disabled" && ACTION2="Disabling"
+
+  if ls $SERVICES 2>/dev/null 1>&2; then
+    for service in $(ls $SERVICES | rev | cut -d"/" -f1 | rev); do
+      status_msg "$ACTION2 $service ..."
+      sudo systemctl $1 "$service"
+      ok_msg "$service $ACTION1!"
+    done
+  fi
+  shopt -u extglob # disable extended globbing
+}
+
+toggle_octoprint_service(){
+  if systemctl list-unit-files | grep -E "octoprint.*" | grep "enabled" &>/dev/null; then
+    do_action_service "stop" "octoprint"
+    do_action_service "disable" "octoprint"
+    sleep 2
+    CONFIRM_MSG=" OctoPrint Service is now >>> DISABLED <<< !"
+  elif systemctl list-unit-files | grep -E "octoprint.*" | grep "disabled" &>/dev/null; then
+    do_action_service "enable" "octoprint"
+    do_action_service "start" "octoprint"
+    sleep 2
+    CONFIRM_MSG=" OctoPrint Service is now >>> ENABLED <<< !"
+  else
+    ERROR_MSG=" You cannot activate a service that does not exist!"
+  fi
+}
+
+read_octoprint_service_status(){
+  unset OPRINT_SERVICE_STATUS
+  if [ ! -f "/etc/systemd/system/octoprint.service" ]; then
+    return 0
+  fi
+  if systemctl list-unit-files | grep -E "octoprint*" | grep "enabled" &>/dev/null; then
+    OPRINT_SERVICE_STATUS="${red}[Disable]${default} OctoPrint Service                       "
+  else
+    OPRINT_SERVICE_STATUS="${green}[Enable]${default} OctoPrint Service                        "
+  fi
+}
+
+start_klipperscreen(){
+  status_msg "Starting KlipperScreen Service ..."
+  sudo systemctl start KlipperScreen && ok_msg "KlipperScreen Service started!"
+}
+
+stop_klipperscreen(){
+  status_msg "Stopping KlipperScreen Service ..."
+  sudo systemctl stop KlipperScreen && ok_msg "KlipperScreen Service stopped!"
+}
+
+restart_klipperscreen(){
+  status_msg "Restarting KlipperScreen Service ..."
+  sudo systemctl restart KlipperScreen && ok_msg "KlipperScreen Service restarted!"
+}
+
+start_MoonrakerTelegramBot(){
+  status_msg "Starting MoonrakerTelegramBot Service ..."
+  sudo systemctl start moonraker-telegram-bot && ok_msg "MoonrakerTelegramBot Service started!"
+}
+
+stop_MoonrakerTelegramBot(){
+  status_msg "Stopping MoonrakerTelegramBot Service ..."
+  sudo systemctl stop moonraker-telegram-bot && ok_msg "MoonrakerTelegramBot Service stopped!"
+}
+
+restart_MoonrakerTelegramBot(){
+  status_msg "Restarting MoonrakerTelegramBot Service ..."
+  sudo systemctl restart moonraker-telegram-bot && ok_msg "MoonrakerTelegramBot Service restarted!"
+}
+
+restart_nginx(){
+  if ls /lib/systemd/system/nginx.service 2>/dev/null 1>&2; then
+    status_msg "Restarting NGINX Service ..."
+    sudo systemctl restart nginx && ok_msg "NGINX Service restarted!"
+  fi
+}
+
+dependency_check(){
+  status_msg "Checking for the following dependencies:"
+  #check if package is installed, if not write name into array
+  for pkg in "${dep[@]}"
+  do
+    echo -e "${cyan}● $pkg ${default}"
+    if [[ ! $(dpkg-query -f'${Status}' --show $pkg 2>/dev/null) = *\ installed ]]; then
+      inst+=($pkg)
+    fi
+  done
+  #if array is not empty, install packages from array elements
+  if [ "${#inst[@]}" != "0" ]; then
+    status_msg "Installing the following dependencies:"
+    for element in ${inst[@]}
+    do
+      echo -e "${cyan}● $element ${default}"
+    done
+    echo
+    sudo apt-get update --allow-releaseinfo-change && sudo apt-get install ${inst[@]} -y
+    ok_msg "Dependencies installed!"
+    #clearing the array
+    unset inst
+  else
+    ok_msg "Dependencies already met! Continue..."
   fi
 }
 
@@ -75,111 +270,150 @@ print_error(){
   done
   sum=$(IFS=+; echo "$((${data_count[*]}))")
   if [ $sum -eq 0 ]; then
-    ERROR_MSG=" Looks like $1 was already removed!\n Skipping..."
+    ERROR_MSG="Looks like $1 was already removed!\n Skipping..."
   else
     ERROR_MSG=""
   fi
 }
 
-pkg_check(){
-  status_msg "Checking if nginx is installed"
-  if [[ $(dpkg-query -f'${Status}' --show nginx 2>/dev/null) = *\ installed ]]; then
-echo "nginx found!"
-else
-echo "nginx was not found, installing..." 2>&1
-sudo apt-get -y install nginx 2>/dev/null
-fi
-}
-
-build_fw(){
-    if [ -d $KLIPPER_DIR ]; then
-      cd $KLIPPER_DIR && make menuconfig
-      status_msg "Building firmware ..."
-      make clean && make && ok_msg "Firmware built!"
-    else
-      warn_msg "Can not build firmware without a Klipper directory!"
-    fi
-}
-
-### grab the printers id
-get_usb_id(){
-  warn_msg "Make sure your printer is the only USB device connected!"
-  while true; do
-    echo -e "${cyan}"
-    read -p "###### Press any key to continue ... " yn
-    echo -e "${default}"
-    case "$yn" in
-      *) break;;
-    esac
-  done
-  status_msg "Identifying the correct USB port ..."
-  USB_ID=$(ls /dev/serial/by-id/*)
-  if [ -e /dev/serial/by-id/* ]; then
-    status_msg "The ID of your printer is:"
-    title_msg "$USB_ID"
-  else
-    warn_msg "Could not retrieve ID!"
-    return 1
-  fi
-}
-
-write_printer_id(){
-  while true; do
-    echo -e "${cyan}"
-    read -p "###### Do you want to write the ID to your printer.cfg? (Y/n): " yn
-    echo -e "${default}"
-    case "$yn" in
-      Y|y|Yes|yes|"")
-        backup_printer_cfg
-cat <<PRINTERID >> $PRINTER_CFG
-
-##########################
-### CREATED WITH KIAUH ###
-##########################
-[mcu]
-serial: $USB_ID
-##########################
-##########################
-PRINTERID
-        ok_msg "Config written!"
-        break;;
-      N|n|No|no) break;;
-    esac
-  done
-}
-
-flash_routine(){
-  echo -e "/=================================================\ "
-  echo -e "|                   ATTENTION!                    |"
-  echo -e "| Flashing a Smoothie based board for the first   |"
-  echo -e "| time with this script will certainly fail.      |"
-  echo -e "| This applies to boards like the BTT SKR V1.3 or |"
-  echo -e "| the newer SKR V1.4 (Turbo). You have to copy    |"
-  echo -e "| the firmware file to the microSD card manually  |"
-  echo -e "| and rename it to 'firmware.bin'.                |"
-  echo -e "|                                                 |"
-  echo -e "| You find the file in: ~/klipper/out/klipper.bin |"
-  echo -e "\=================================================/ "
+setup_gcode_shell_command(){
   echo
+  top_border
+  echo -e "| You are about to install the G-Code Shell Command     |"
+  echo -e "| extension. Please make sure to read the instructions  |"
+  echo -e "| before you continue and remember that potential risks |"
+  echo -e "| can be involved after installing this extension!      |"
+  blank_line
+  echo -e "| ${red}You accept that you are doing this on your own risk!${default}  |"
+  bottom_border
   while true; do
-    echo -e "${cyan}"
-    read -p "###### Do you want to continue? (Y/n): " yn
-    echo -e "${default}"
+    read -p "${cyan}###### Do you want to continue? (Y/n):${default} " yn
     case "$yn" in
       Y|y|Yes|yes|"")
-      get_usb_id && flash_mcu && write_printer_id; break;;
-      N|n|No|no) break;;
+        if [ -d $KLIPPER_DIR/klippy/extras ]; then
+          status_msg "Installing gcode shell command extension ..."
+          if [ -f $KLIPPER_DIR/klippy/extras/gcode_shell_command.py ]; then
+            warn_msg "There is already a file named 'gcode_shell_command.py'\nin the destination location!"
+            while true; do
+              read -p "${cyan}###### Do you want to overwrite it? (Y/n):${default} " yn
+              case "$yn" in
+                Y|y|Yes|yes|"")
+                  rm -f $KLIPPER_DIR/klippy/extras/gcode_shell_command.py
+                  install_gcode_shell_command
+                  break;;
+                N|n|No|no)
+                  break;;
+              esac
+            done
+          else
+            install_gcode_shell_command
+          fi
+        else
+          ERROR_MSG="Folder ~/klipper/klippy/extras not found!"
+        fi
+        break;;
+      N|n|No|no)
+        break;;
+      *)
+        print_unkown_cmd
+        print_msg && clear_msg;;
     esac
   done
 }
 
-flash_mcu(){
-  stop_klipper
-  if ! make flash FLASH_DEVICE="$USB_ID" ; then
-    warn_msg "Flashing failed!"
-    warn_msg "Please read the log above!"
-  else
-    ok_msg "Flashing successfull!"
+install_gcode_shell_command(){
+  do_action_service "stop" "klipper"
+  status_msg "Copy 'gcode_shell_command.py' to '$KLIPPER_DIR/klippy/extras' ..."
+  cp ${SRCDIR}/kiauh/resources/gcode_shell_command.py $KLIPPER_DIR/klippy/extras
+  while true; do
+    echo
+    read -p "${cyan}###### Do you want to create the example shell command? (Y/n):${default} " yn
+    case "$yn" in
+      Y|y|Yes|yes|"")
+        status_msg "Copy shell_command.cfg ..."
+        ### create a backup of the config folder
+        backup_klipper_config_dir
+
+        ### handle single printer.cfg
+        if [ -f $klipper_cfg_loc/printer.cfg ] && [ ! -f $klipper_cfg_loc/shell_command.cfg ]; then
+          ### copy shell_command.cfg to config location
+          cp ${SRCDIR}/kiauh/resources/shell_command.cfg $klipper_cfg_loc
+          ok_msg "$klipper_cfg_loc/shell_command.cfg created!"
+
+          ### write the include to the very first line of the printer.cfg
+          sed -i "1 i [include shell_command.cfg]" $klipper_cfg_loc/printer.cfg
+        fi
+
+        ### handle multi printer.cfg
+        if ls $klipper_cfg_loc/printer_*  2>/dev/null 1>&2; then
+          for config in $(find $klipper_cfg_loc/printer_*/printer.cfg); do
+            path=$(echo $config | rev | cut -d"/" -f2- | rev)
+            if [ ! -f $path/shell_command.cfg ]; then
+              ### copy shell_command.cfg to config location
+              cp ${SRCDIR}/kiauh/resources/shell_command.cfg $path
+              ok_msg "$path/shell_command.cfg created!"
+
+              ### write the include to the very first line of the printer.cfg
+              sed -i "1 i [include shell_command.cfg]" $path/printer.cfg
+            fi
+          done
+        fi
+        break;;
+      N|n|No|no)
+        break;;
+    esac
+  done
+  ok_msg "Shell command extension installed!"
+  do_action_service "restart" "klipper"
+}
+
+create_minimal_cfg(){
+  #create a minimal default config
+  if [ "$SEL_DEF_CFG" = "true" ]; then
+		cat <<- EOF >> $PRINTER_CFG
+		[mcu]
+		serial: </dev/serial/by-id/your-mcu>
+
+		[printer]
+		kinematics: none
+		max_velocity: 1
+		max_accel: 1
+
+		[virtual_sdcard]
+		path: ~/sdcard
+
+		[pause_resume]
+		[display_status]
+EOF
   fi
-  start_klipper
-}
+}
+
+init_ini(){
+  ### copy an existing kiauh.ini to its new location to keep all possible saved values
+  if [ -f ${SRCDIR}/kiauh/kiauh.ini ] && [ ! -f $INI_FILE ]; then
+    cp ${SRCDIR}/kiauh/kiauh.ini $INI_FILE
+  fi
+  if [ ! -f $INI_FILE ]; then
+    echo -e "#don't edit this file if you don't know what you are doing...\c" > $INI_FILE
+  fi
+  if [ ! $(grep -E "^backup_before_update=." $INI_FILE) ]; then
+    echo -e "\nbackup_before_update=false\c" >> $INI_FILE
+  fi
+  if [ ! $(grep -E "^previous_origin_state=[[:alnum:]]" $INI_FILE) ]; then
+    echo -e "\nprevious_origin_state=0\c" >> $INI_FILE
+  fi
+  if [ ! $(grep -E "^previous_smoothing_state=[[:alnum:]]" $INI_FILE) ]; then
+    echo -e "\nprevious_smoothing_state=0\c" >> $INI_FILE
+  fi
+  if [ ! $(grep -E "^previous_shaping_state=[[:alnum:]]" $INI_FILE) ]; then
+    echo -e "\nprevious_shaping_state=0\c" >> $INI_FILE
+  fi
+  if [ ! $(grep -E "^logupload_accepted=." $INI_FILE) ]; then
+    echo -e "\nlogupload_accepted=false\c" >> $INI_FILE
+  fi
+  ###add empty klipper config path if missing
+  if [ ! $(grep -E "^klipper_cfg_loc=" $INI_FILE) ]; then
+    echo -e "\nklipper_cfg_loc=\c" >> $INI_FILE
+  fi
+  fetch_webui_ports
+}

scripts/install_dwc2.sh

@@ -1,166 +1,390 @@
-#TODO:
-# - check for existing/running octoprint service
-# - ask for permission to disable octoprint service
+### base variables
+SYSTEMDDIR="/etc/systemd/system"
+DWC_ENV="${HOME}/dwc-env"
+DWC2_DIR="${HOME}/duetwebcontrol"
 
-dwc2_install_routine(){
-  if [ -d $KLIPPER_DIR ]; then
-    # check for existing installation
-    if [ -d ${HOME}/klippy-env/lib/python2.7/site-packages/tornado ]; then
-      ERROR_MSG=" Looks like DWC2 is already installed!\n Skipping..."
-      return
-    fi
-    stop_klipper
-    install_tornado
-    install_dwc2fk && dwc2fk_cfg
-    install_dwc2
-    start_klipper
+system_check_dwc(){
+  ### check system for an installed octoprint service
+  if systemctl is-enabled octoprint.service -q 2>/dev/null; then
+    OCTOPRINT_ENABLED="true"
+  fi
+}
+
+dwc_setup_dialog(){
+  status_msg "Initializing Duet Web Control installation ..."
+
+  ### check system for several requirements before initializing the dwc2 installation
+  system_check_dwc
+
+  ### check for existing klipper service installations
+  if [ ! "$(systemctl list-units --full -all -t service --no-legend | grep -F "klipper.service")" ] && [ ! "$(systemctl list-units --full -all -t service --no-legend | grep -E "klipper-[[:digit:]].service")" ]; then
+    ERROR_MSG="Klipper service not found, please install Klipper first!" && return 0
+  fi
+
+  ### count amount of klipper services
+  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "klipper.service")" ]; then
+    INSTANCE_COUNT=1
   else
-    ERROR_MSG=" Please install Klipper first!\n Skipping..."
+    INSTANCE_COUNT=$(systemctl list-units --full -all -t service --no-legend | grep -E "klipper-[[:digit:]].service" | wc -l)
+  fi
+
+  ### initial config path check
+  check_klipper_cfg_path
+
+  ### ask user how to handle OctoPrint, Haproxy and Lighttpd
+  process_octoprint_dialog_dwc2
+  process_services_dialog
+
+  ### instance confirmation dialog
+  while true; do
+      echo
+      top_border
+      if [ "$INSTANCE_COUNT" -gt 1 ]; then
+        printf "|%-55s|\n" " $INSTANCE_COUNT Klipper instances were found!"
+      else
+        echo -e "| 1 Klipper instance was found!                         | "
+      fi
+      echo -e "| You need one DWC instance per Klipper instance.       | "
+      bottom_border
+      echo
+      read -p "${cyan}###### Create $INSTANCE_COUNT DWC instances? (Y/n):${default} " yn
+      case "$yn" in
+        Y|y|Yes|yes|"")
+          echo -e "###### > Yes"
+          status_msg "Creating $INSTANCE_COUNT DWC instances ..."
+          dwc_setup
+          break;;
+        N|n|No|no)
+          echo -e "###### > No"
+          warn_msg "Exiting DWC setup ..."
+          echo
+          break;;
+        *)
+          print_unkown_cmd
+          print_msg && clear_msg;;
+    esac
+  done
+}
+
+###TODO for future: should be some kind of shared function between moonraker and this installer, since it does the same
+process_octoprint_dialog_dwc2(){
+  ### ask user to disable octoprint when its service was found
+  if [ "$OCTOPRINT_ENABLED" = "true" ]; then
+    while true; do
+      echo
+      top_border
+      echo -e "|       ${red}!!! WARNING - OctoPrint service found !!!${default}       |"
+      hr
+      echo -e "|  You might consider disabling the OctoPrint service,  |"
+      echo -e "|  since an active OctoPrint service may lead to unex-  |"
+      echo -e "|  pected behavior of Duet Web Control for Klipper.     |"
+      bottom_border
+      read -p "${cyan}###### Do you want to disable OctoPrint now? (Y/n):${default} " yn
+      case "$yn" in
+        Y|y|Yes|yes|"")
+          echo -e "###### > Yes"
+          status_msg "Stopping OctoPrint ..."
+          sudo systemctl stop octoprint && ok_msg "OctoPrint service stopped!"
+          status_msg "Disabling OctoPrint ..."
+          sudo systemctl disable octoprint && ok_msg "OctoPrint service disabled!"
+          break;;
+        N|n|No|no)
+          echo -e "###### > No"
+          break;;
+        *)
+          print_unkown_cmd
+          print_msg && clear_msg;;
+      esac
+    done
+  fi
+  status_msg "Installation will start now! Please wait ..."
+}
+
+#############################################################
+#############################################################
+
+get_dwc_ver(){
+  DWC2_VERSION=$(curl -s https://api.github.com/repositories/28820678/releases/latest | grep tag_name | cut -d'"' -f4)
+}
+
+dwc_setup(){
+  ### get printer config directory
+  source_kiauh_ini
+  DWC_CONF_LOC="$klipper_cfg_loc"
+
+  ### check dependencies
+  dep=(git wget gzip tar curl)
+  dependency_check
+
+  ### step 1: get dwc2-for-klipper
+  status_msg "Downloading DWC2-for-Klipper-Socket ..."
+  cd "${HOME}" && git clone "$DWC2FK_REPO"
+  ok_msg "Download complete!"
+
+  ### step 2: install dwc2 dependencies and create python virtualenv
+  status_msg "Installing dependencies ..."
+  install_dwc_packages
+  create_dwc_virtualenv
+
+  ### step 3: create dwc2.cfg folder and dwc2.cfg
+  [ ! -d "$DWC_CONF_LOC" ] && mkdir -p "$DWC_CONF_LOC"
+  dwc_cfg_creation
+
+  ### step 4: download Duet Web Control
+  download_dwc_webui
+
+  ### step 5: create dwc instances
+  INSTANCE=1
+  if [ "$INSTANCE_COUNT" -eq $INSTANCE ]; then
+    create_single_dwc_instance
+  else
+    #create_multi_dwc_instance
+    create_multi_dwc_instance
   fi
 }
 
-install_tornado(){
-  #check for dependencies
-  dep=(virtualenv)
-  dep_check
-  #execute operation
-  status_msg "Installing Tornado 5.1.1 ..."
-  cd ${HOME}
-  PYTHONDIR="${HOME}/klippy-env"
-  virtualenv ${PYTHONDIR}
-  ${PYTHONDIR}/bin/pip install tornado==5.1.1 && ok_msg "Tornado 5.1.1 successfully installed!"
-}
-
-install_dwc2fk(){
-  cd ${HOME}
-  status_msg "Cloning dwc2-for-klipper repository ..."
-  git clone $DWC2FK_REPO && ok_msg "dwc2-for-klipper successfully cloned!"
-  #create a web_dwc2.py symlink if not already existing
-  if [ -d $KLIPPER_DIR/klippy/extras ] && [ ! -e $KLIPPER_DIR/klippy/extras/web_dwc2.py ]; then
-    status_msg "Creating web_dwc2.py symlink ..."
-    ln -s $DWC2FK_DIR/web_dwc2.py $KLIPPER_DIR/klippy/extras/web_dwc2.py && ok_msg "Symlink created!"
-  fi
-}
-
-dwc2fk_cfg(){
-  while true; do
-    echo -e "${cyan}"
-    read -p "###### Do you want to create the config now? (Y/n): " yn
-    echo -e "${default}"
-    case "$yn" in
-    Y|y|Yes|yes|"") create_dwc2fk_cfg; break;;
-    N|n|No|no) break;;
-    *) echo "Unknown parameter: $yn"; dwc2fk_cfg;;
-    esac
-  done
-}
-
-create_dwc2fk_cfg(){
-  echo -e "/=================================================\ "
-  echo -e "|  1) [Default configuration]                     | "
-  echo -e "|  2) [Custom configuration]                      | "
-  echo -e "|  3) [Skip]                                      | "
-  echo -e "\=================================================/ "
-  while true; do
-    read -p "Please select: " choice; echo
-    case "$choice" in
-    1) dwc2fk_default_cfg && ok_msg "Config written ..."; break;;
-    2) create_dwc2fk_custom_cfg && ok_msg "Config written ..."; break;;
-    3) echo "Skipping ..."; break;;
-    esac
-  done
-}
-
-dwc2fk_default_cfg(){
-  cat <<DWC2 >> $PRINTER_CFG
-
-##########################
-### CREATED WITH KIAUH ###
-##########################
-[virtual_sdcard]
-path: ~/sdcard
-
-[web_dwc2]
-printer_name: my_printer
-listen_adress: 0.0.0.0
-listen_port: 4750
-web_path: dwc2/web
-##########################
-##########################
-DWC2
-}
-
-create_dwc2fk_custom_cfg(){
-  echo -e "${cyan}"
-  read -e -p "Printer name: " -i "my_printer" PRINTER_NAME
-  read -e -p "Listen adress: " -i "0.0.0.0" LISTEN_ADRESS
-  read -e -p "Listen port: " -i "4750" LISTEN_PORT
-  read -e -p "Web path: " -i "dwc2/web" WEB_PATH
-  echo -e "${default}"
-  DWC2_CFG=$(cat <<DWC2
-
-##########################
-### CREATED WITH KIAUH ###
-##########################
-[virtual_sdcard]
-path: ~/sdcard
-
-[web_dwc2]
-printer_name: $PRINTER_NAME
-listen_adress: $LISTEN_ADRESS
-listen_port: $LISTEN_PORT
-web_path: $WEB_PATH
-##########################
-##########################
-DWC2
-)
-  echo "The following lines will be written:"
-  echo -e "$DWC2_CFG"
-  while true; do
-    echo -e "${cyan}"
-    read -p "###### Write now (Y) or start over (n)? (Y/n): " yn
-    echo -e "${default}"
-    case "$yn" in
-      Y|y|Yes|yes|"") echo -e "$DWC2_CFG" >> $PRINTER_CFG; break;;
-      N|n|No|no) create_dwc2fk_custom_cfg;;
-    esac
-  done
-}
-
-install_dwc2(){
-  #needed packages for webcam
-  while true; do
-    echo -e "${cyan}"
-    read -p "###### Do you want to use a webcam? (Y/n): " yn
-    echo -e "${default}"
-    case "$yn" in
-      Y|y|Yes|yes|"")
-      status_msg "Checking for dependencies ..."
-      webcam_dep_check && ok_msg "Dependencies installed!"
-      break;;
-      N|n|No|no) break;;
-         *) echo "Unknown parameter: $yn"; echo;;
-    esac
-  done
-  #the update_dwc2 function does the same as installing dwc2
-  update_dwc2 && ok_msg "DWC2 Web UI installed!"
-}
-
-webcam_dep_check(){
-  webcam_dep=(
-  build-essential
-  libjpeg8-dev
-  imagemagick
-  libv4l-dev
-  cmake
-  )
-  for pkg in "${webcam_dep[@]}"
+download_dwc_webui(){
+  #get Duet Web Control
+  GET_DWC2_URL=$(curl -s https://api.github.com/repositories/28820678/releases/latest | grep browser_download_url | cut -d'"' -f4)
+  status_msg "Downloading DWC2 Web UI ..."
+  [ ! -d "$DWC2_DIR" ] && mkdir -p "$DWC2_DIR"
+  cd "$DWC2_DIR" && wget "$GET_DWC2_URL"
+  ok_msg "Download complete!"
+  status_msg "Extracting archive ..."
+  unzip -q -o *.zip
+  for f_ in $(find . | grep '.gz')
   do
-    if ! [[ $(dpkg-query -f'${Status}' --show $pkg 2>/dev/null) = *\ installed ]]; then
-      install+=($pkg)
-    fi
+    gunzip -f "${f_}"
   done
-  if ! [ ${#install[@]} -eq 0 ]; then
-    sudo apt-get install ${install[@]} -y
+  ok_msg "Done!"
+  status_msg "Writing DWC version to file ..."
+  echo "$GET_DWC2_URL" | cut -d/ -f8 > "$DWC2_DIR/.version"
+  ok_msg "Done!"
+  status_msg "Remove downloaded archive ..."
+  rm -rf *.zip && ok_msg "Done!" && ok_msg "Duet Web Control installed!"
+}
+
+##############################################################################################
+#********************************************************************************************#
+##############################################################################################
+
+install_dwc_packages()
+{
+    PKGLIST="python3-virtualenv python3-dev python3-tornado"
+
+    # Update system package info
+    status_msg "Running apt-get update..."
+    sudo apt-get update --allow-releaseinfo-change
+
+    # Install desired packages
+    status_msg "Installing packages..."
+    sudo apt-get install --yes "${PKGLIST}"
+}
+
+create_dwc_virtualenv()
+{
+    status_msg "Installing python virtual environment..."
+
+    # Create virtualenv if it doesn't already exist
+    [ ! -d "${DWC_ENV}" ] && virtualenv -p /usr/bin/python3 "${DWC_ENV}"
+
+    # Install/update dependencies
+    "${DWC_ENV}"/bin/pip install tornado==6.0.4
+}
+
+create_single_dwc_startscript(){
+  ### create systemd service file
+  sudo /bin/sh -c "cat > ${SYSTEMDDIR}/dwc.service" << DWC
+[Unit]
+Description=DuetWebControl
+After=network.target
+[Install]
+WantedBy=multi-user.target
+[Service]
+Type=simple
+User=${USER}
+RemainAfterExit=yes
+ExecStart=${DWC_ENV}/bin/python3 ${DWC2FK_DIR}/web_dwc2.py -l ${DWC_LOG} -c ${DWC_CFG}
+Restart=always
+RestartSec=10
+DWC
+}
+
+create_multi_dwc_startscript(){
+  ### create systemd service file
+  sudo /bin/sh -c "cat > ${SYSTEMDDIR}/dwc-$INSTANCE.service" << DWC
+[Unit]
+Description=DuetWebControl
+After=network.target
+[Install]
+WantedBy=multi-user.target
+[Service]
+Type=simple
+User=${USER}
+RemainAfterExit=yes
+ExecStart=${DWC_ENV}/bin/python3 ${DWC2FK_DIR}/web_dwc2.py -l ${DWC_LOG} -c ${DWC_CFG}
+Restart=always
+RestartSec=10
+DWC
+}
+
+create_single_dwcfk_cfg(){
+### create single instance config file
+/bin/sh -c "cat > $DWC_CONF_LOC/dwc2.cfg" << DWCCFG
+[webserver]
+listen_adress: 0.0.0.0
+web_root: ${HOME}/duetwebcontrol
+port: ${PORT}
+
+[reply_filters]
+regex:
+    max_accel: \d+.\d+
+    max_accel_to_decel: \d+.\d+
+    square_corner_velocity: \d+.\d+
+    max_velocity: \d+.\d+
+DWCCFG
+}
+
+create_multi_dwcfk_cfg(){
+### create single instance config file
+/bin/sh -c "cat > $DWC_CONF_LOC/printer_$INSTANCE/dwc2.cfg" << DWCCFG
+[webserver]
+listen_adress: 0.0.0.0
+web_root: ${HOME}/duetwebcontrol
+port: ${PORT}
+
+[reply_filters]
+regex:
+    max_accel: \d+.\d+
+    max_accel_to_decel: \d+.\d+
+    square_corner_velocity: \d+.\d+
+    max_velocity: \d+.\d+
+DWCCFG
+}
+
+##############################################################################################
+#********************************************************************************************#
+##############################################################################################
+
+print_dwc_ip_list(){
+  i=1
+  for ip in ${dwc_ip_list[@]}; do
+    echo -e "       ${cyan}● Instance $i:${default} $ip"
+    i=$((i + 1))
+  done
+}
+
+create_single_dwc_instance(){
+  status_msg "Setting up 1 Duet Web Control instance ..."
+
+  ### single instance variables
+  DWC_LOG=/tmp/dwc.log
+  DWC_CFG="$DWC_CONF_LOC/dwc2.cfg"
+
+  ### create instance
+  status_msg "Creating single DWC instance ..."
+  create_single_dwc_startscript
+
+  ### enable instance
+  sudo systemctl enable dwc.service
+  ok_msg "Single DWC instance created!"
+
+  ### launching instance
+  status_msg "Launching DWC instance ..."
+  sudo systemctl start dwc
+
+  ### confirm message
+  CONFIRM_MSG="Single DWC instance has been set up!"
+  print_msg && clear_msg
+
+  ### display moonraker ip to the user
+  print_dwc_ip_list; echo
+}
+
+create_multi_dwc_instance(){
+  status_msg "Setting up $INSTANCE_COUNT instances of Duet Web Control ..."
+  while [ $INSTANCE -le "$INSTANCE_COUNT" ]; do
+    ### multi instance variables
+    DWC_LOG=/tmp/dwc-$INSTANCE.log
+    DWC_CFG="$DWC_CONF_LOC/printer_$INSTANCE/dwc2.cfg"
+
+    ### create instance
+    status_msg "Creating instance #$INSTANCE ..."
+    create_multi_dwc_startscript
+
+    ### enable instance
+    sudo systemctl enable dwc-$INSTANCE.service
+    ok_msg "DWC instance $INSTANCE created!"
+
+    ### launching instance
+    status_msg "Launching DWC instance $INSTANCE ..."
+    sudo systemctl start dwc-$INSTANCE
+
+    ### instance counter +1
+    INSTANCE=$(expr $INSTANCE + 1)
+  done
+
+  ### confirm message
+  CONFIRM_MSG="$INSTANCE_COUNT DWC instances has been set up!"
+  print_msg && clear_msg
+
+  ### display moonraker ip to the user
+  print_dwc_ip_list; echo
+}
+
+dwc_cfg_creation(){
+  ### default dwc port
+  DEFAULT_PORT=4750
+
+  ### get printer config directory
+  source_kiauh_ini
+  DWC_CONF_LOC="$klipper_cfg_loc"
+
+  ### reset instances back to 1 again
+  INSTANCE=1
+
+  ### declare empty array for ips which get displayed to the user at the end of the setup
+  HOSTNAME=$(hostname -I | cut -d" " -f1)
+  dwc_ip_list=()
+
+  ### create single instance dwc2.cfg file
+  if [ "$INSTANCE_COUNT" -eq $INSTANCE ]; then
+    ### set port
+    PORT=$DEFAULT_PORT
+
+    ### write the ip and port to the ip list for displaying it later to the user
+    dwc_ip_list+=("$HOSTNAME:$PORT")
+
+    status_msg "Creating dwc2.cfg in $DWC_CONF_LOC"
+    [ ! -d "$DWC_CONF_LOC" ] && mkdir -p "$DWC_CONF_LOC"
+    if [ ! -f "$DWC_CONF_LOC/dwc2.cfg" ]; then
+      create_single_dwcfk_cfg && ok_msg "dwc2.cfg created!"
+    else
+      warn_msg "There is already a file called 'dwc2.cfg'!"
+      warn_msg "Skipping..."
+    fi
+
+  ### create multi instance moonraker.conf files
+  else
+    while [ $INSTANCE -le "$INSTANCE_COUNT" ]; do
+      ### set each instance to its own port
+      PORT=$(expr $DEFAULT_PORT + $INSTANCE - 1)
+
+      ### write the ip and port to the ip list for displaying it later to the user
+      dwc_ip_list+=("$HOSTNAME:$PORT")
+
+      ### start the creation of each instance
+      status_msg "Creating dwc2.cfg for instance #$INSTANCE"
+      [ ! -d "$DWC_CONF_LOC/printer_$INSTANCE" ] && mkdir -p "$DWC_CONF_LOC/printer_$INSTANCE"
+      if [ ! -f "$DWC_CONF_LOC/printer_$INSTANCE/dwc2.cfg" ]; then
+        create_multi_dwcfk_cfg && ok_msg "dwc2.cfg created!"
+      else
+        warn_msg "There is already a file called 'dwc2.cfg'!"
+        warn_msg "Skipping..."
+      fi
+
+      ### raise instance counter by 1
+      INSTANCE=$(expr $INSTANCE + 1)
+    done
   fi
 }

scripts/install_klipper.sh

@@ -1,30 +1,195 @@
-install_klipper(){
-  if [ -e /etc/init.d/klipper ] && [ -e /etc/default/klipper ]; then
-    ERROR_MSG=" Looks like klipper is already installed!\n Skipping ..."
-  else
-    #check for dependencies
-    dep=(git)
-    dep_check
-    #execute operation
-    cd ${HOME}
-    status_msg "Cloning klipper repository ..."
-    git clone $KLIPPER_REPO && ok_msg "Klipper successfully cloned!"
-    status_msg "Installing klipper service ..."
-    $KLIPPER_DIR/scripts/install-octopi.sh && sleep 2 && ok_msg "Klipper installation complete!"
-    #create a klippy.log symlink in home-dir just for convenience
-    if [ ! -e ${HOME}/klippy.log ]; then
-      status_msg "Creating klippy.log symlink ..."
-      ln -s /tmp/klippy.log ${HOME}/klippy.log && ok_msg "Symlink created!"
-    fi
-    while true; do
-      echo -e "${cyan}"
-      read -p "###### Do you want to flash your MCU now? (Y/n): " yn
-      echo -e "${default}"
-      case "$yn" in
-        Y|y|Yes|yes|"") build_fw && flash_routine; break;;
-        N|n|No|no) break;;
-      *) warn_msg "Unknown parameter: $yn"; echo;;
-    esac
-  done
+### base variables
+SYSTEMDDIR="/etc/systemd/system"
+KLIPPY_ENV="${HOME}/klippy-env"
+KLIPPER_DIR="${HOME}/klipper"
+KLIPPER_REPO="https://github.com/Klipper3d/klipper.git"
+
+klipper_setup_dialog(){
+  ### check for existing klipper service installations
+  SERVICE_FILES=""
+  INITD_SERVICE_FILES=$(find "/etc/init.d" -regextype posix-extended -regex "/etc/init.d/klipper(-[^0])?[0-9]*")
+  SYSTEMD_SERVICE_FILES=$(find "$SYSTEMDDIR" -regextype posix-extended -regex "$SYSTEMDDIR/klipper(-[^0])?[0-9]*.service")
+  [ -n "$INITD_SERVICE_FILES" ] && SERVICE_FILES+="${INITD_SERVICE_FILES}"
+  [ -n "$SYSTEMD_SERVICE_FILES" ] && SERVICE_FILES+=" ${SYSTEMD_SERVICE_FILES}"
+  if [ -n "$SERVICE_FILES" ]; then
+    ERROR_MSG="At least one Klipper service is already installed:"
+    for service in $SERVICE_FILES; do
+      ERROR_MSG="${ERROR_MSG}\n ➔ $service"
+    done && return
   fi
-}
+
+  status_msg "Initializing Klipper installation ..."
+
+  ### initial printer.cfg path check
+  check_klipper_cfg_path
+
+  ### ask for amount of instances to create
+  top_border
+  echo -e "| Please select the number of Klipper instances to set  |"
+  echo -e "| up. The number of Klipper instances will determine    |"
+  echo -e "| the amount of printers you can run from this machine. |"
+  blank_line
+  echo -e "| ${yellow}WARNING: There is no limit on the number of instances${default} |"
+  echo -e "| ${yellow}you can set up with this script.${default}                      |"
+  bottom_border
+  count=""
+  while [[ ! ($count =~ ^[1-9]+((0)+)?$) ]]; do
+    read -p "${cyan}###### Number of Klipper instances to set up:${default} " count
+    if [[ ! ($count =~ ^[1-9]+((0)+)?$) ]]; then
+      warn_msg "Invalid Input!" && echo
+    else
+      echo
+      read -p "${cyan}###### Install $count instance(s)? (Y/n):${default} " yn
+      case "$yn" in
+        Y|y|Yes|yes|"")
+          echo -e "###### > Yes"
+          status_msg "Installing $count Klipper instance(s) ..."
+          klipper_setup "$count"
+          break;;
+        N|n|No|no)
+          echo -e "###### > No"
+          warn_msg "Exiting Klipper setup ..."
+          echo
+          break;;
+        *)
+          print_unkown_cmd
+          print_msg && clear_msg;;
+      esac
+    fi
+  done
+}
+
+install_klipper_packages(){
+  ### read PKGLIST from official install script
+  status_msg "Reading dependencies..."
+  install_script="${HOME}/klipper/scripts/install-octopi.sh"
+  #PKGLIST=$(grep "PKGLIST=" $install_script | sed 's/PKGLIST//g; s/[$={}\n"]//g')
+  PKGLIST=$(grep "PKGLIST=" "$install_script" | sed 's/PKGLIST//g; s/[$"{}=]//g; s/\s\s*/ /g' | tr -d '\n')
+  ### add dbus requirement for DietPi distro
+  [ -e "/boot/dietpi/.version" ] && PKGLIST+=" dbus"
+
+  for pkg in $PKGLIST; do
+    echo "${cyan}$pkg${default}"
+  done
+  read -r -a PKGLIST <<< "$PKGLIST"
+
+  ### Update system package info
+  status_msg "Running apt-get update..."
+  sudo apt-get update --allow-releaseinfo-change
+
+  ### Install desired packages
+  status_msg "Installing packages..."
+  sudo apt-get install --yes "${PKGLIST[@]}"
+}
+
+create_klipper_virtualenv(){
+  status_msg "Installing python virtual environment..."
+  # Create virtualenv if it doesn't already exist
+  [ ! -d "${KLIPPY_ENV}" ] && virtualenv -p python2 "${KLIPPY_ENV}"
+  # Install/update dependencies
+  "${KLIPPY_ENV}"/bin/pip install -r "${KLIPPER_DIR}"/scripts/klippy-requirements.txt
+}
+
+klipper_setup(){
+  INSTANCE_COUNT=$1
+  ### checking dependencies
+  dep=(git)
+  dependency_check
+
+  ### step 1: clone klipper
+  status_msg "Downloading Klipper ..."
+  ### force remove existing klipper dir and clone into fresh klipper dir
+  [ -d "$KLIPPER_DIR" ] && rm -rf "$KLIPPER_DIR"
+  cd "${HOME}" && git clone "$KLIPPER_REPO"
+  status_msg "Download complete!"
+
+  ### step 2: install klipper dependencies and create python virtualenv
+  status_msg "Installing dependencies ..."
+  install_klipper_packages
+  create_klipper_virtualenv
+
+  ### step 3: create shared gcode_files and logs folder
+  [ ! -d "${HOME}"/gcode_files ] && mkdir -p "${HOME}"/gcode_files
+  [ ! -d "${HOME}"/klipper_logs ] && mkdir -p "${HOME}"/klipper_logs
+
+  ### step 4: create klipper instances
+  create_klipper_service
+
+  ### confirm message
+  if [[ $INSTANCE_COUNT -eq 1 ]]; then
+    CONFIRM_MSG="Klipper has been set up!"
+  elif [[ $INSTANCE_COUNT -gt 1 ]]; then
+    CONFIRM_MSG="$INSTANCE_COUNT Klipper instances have been set up!"
+  fi && print_msg && clear_msg
+}
+
+create_klipper_service(){
+  ### get config directory
+  source_kiauh_ini
+
+  ### set up default values
+  SINGLE_INST=1
+  CFG_PATH="$klipper_cfg_loc"
+  KL_ENV=$KLIPPY_ENV
+  KL_DIR=$KLIPPER_DIR
+  KL_LOG="${HOME}/klipper_logs/klippy.log"
+  KL_UDS="/tmp/klippy_uds"
+  P_TMP="/tmp/printer"
+  P_CFG="$CFG_PATH/printer.cfg"
+  P_CFG_SRC="${SRCDIR}/kiauh/resources/printer.cfg"
+  KL_SERV_SRC="${SRCDIR}/kiauh/resources/klipper.service"
+  KL_SERV_TARGET="$SYSTEMDDIR/klipper.service"
+
+  write_kl_service(){
+    [ ! -d "$CFG_PATH" ] && mkdir -p "$CFG_PATH"
+    ### create a minimal config if there is no printer.cfg
+    [ ! -f "$P_CFG" ] && cp "$P_CFG_SRC" "$P_CFG"
+    ### replace placeholder
+    if [ ! -f $KL_SERV_TARGET ]; then
+      status_msg "Creating Klipper Service $i ..."
+        sudo cp "$KL_SERV_SRC" $KL_SERV_TARGET
+        sudo sed -i "s|%INST%|$i|" $KL_SERV_TARGET
+        sudo sed -i "s|%USER%|${USER}|" $KL_SERV_TARGET
+        sudo sed -i "s|%KL_ENV%|$KL_ENV|" $KL_SERV_TARGET
+        sudo sed -i "s|%KL_DIR%|$KL_DIR|" $KL_SERV_TARGET
+        sudo sed -i "s|%KL_LOG%|$KL_LOG|" $KL_SERV_TARGET
+        sudo sed -i "s|%P_CFG%|$P_CFG|" $KL_SERV_TARGET
+        sudo sed -i "s|%P_TMP%|$P_TMP|" $KL_SERV_TARGET
+        sudo sed -i "s|%KL_UDS%|$KL_UDS|" $KL_SERV_TARGET
+    fi
+  }
+
+  if [[ $SINGLE_INST -eq $INSTANCE_COUNT ]]; then
+    ### write single instance service
+    write_kl_service
+    ### enable instance
+    sudo systemctl enable klipper.service
+    ok_msg "Single Klipper instance created!"
+    ### launching instance
+    status_msg "Launching Klipper instance ..."
+    sudo systemctl start klipper
+  else
+    i=1
+    while [[ $i -le $INSTANCE_COUNT ]]; do
+      ### rewrite default variables for multi instance cases
+      CFG_PATH="$klipper_cfg_loc/printer_$i"
+      KL_SERV_TARGET="$SYSTEMDDIR/klipper-$i.service"
+      P_TMP="/tmp/printer-$i"
+      P_CFG="$CFG_PATH/printer.cfg"
+      KL_LOG="${HOME}/klipper_logs/klippy-$i.log"
+      KL_UDS="/tmp/klippy_uds-$i"
+      ### write multi instance service
+      write_kl_service
+      ### enable instance
+      sudo systemctl enable klipper-$i.service
+      ok_msg "Klipper instance #$i created!"
+      ### launching instance
+      status_msg "Launching Klipper instance #$i ..."
+      sudo systemctl start klipper-$i
+
+      ### raise values by 1
+      i=$((i+1))
+    done
+    unset i
+  fi
+}

scripts/install_klipper_webui.sh

@@ -0,0 +1,603 @@
+MAINSAIL_REPO_API="https://api.github.com/repos/mainsail-crew/mainsail/releases"
+FLUIDD_REPO_API="https://api.github.com/repos/fluidd-core/fluidd/releases"
+
+system_check_webui(){
+  ### check system for installed moonraker service
+  if ls /etc/systemd/system/moonraker.service 2>/dev/null 1>&2 || ls /etc/systemd/system | grep -q -E "moonraker-[[:digit:]]+.service"; then
+    moonraker_chk_ok="true"
+  else
+    moonraker_chk_ok="false"
+  fi
+
+  ### check system for an installed and enabled octoprint service
+  if sudo systemctl list-unit-files | grep -E "octoprint.*" | grep "enabled" &>/dev/null; then
+    OCTOPRINT_ENABLED="true"
+  fi
+
+  ### check system for an installed haproxy service
+  if [[ $(dpkg-query -f'${Status}' --show haproxy 2>/dev/null) = *\ installed ]]; then
+    HAPROXY_FOUND="true"
+  fi
+
+  ### check system for an installed lighttpd service
+  if [[ $(dpkg-query -f'${Status}' --show lighttpd 2>/dev/null) = *\ installed ]]; then
+    LIGHTTPD_FOUND="true"
+  fi
+
+  ### check system for an installed apache2 service
+  if [[ $(dpkg-query -f'${Status}' --show apache2 2>/dev/null) = *\ installed ]]; then
+    APACHE2_FOUND="true"
+  fi
+}
+
+get_user_selection_mjpg-streamer(){
+  while true; do
+    unset INSTALL_MJPG
+    echo
+    top_border
+    echo -e "|  Install MJGP-Streamer for webcam support?            |"
+    bottom_border
+    read -p "${cyan}###### Install MJPG-Streamer? (Y/n):${default} " yn
+    case "$yn" in
+      Y|y|Yes|yes|"")
+        echo -e "###### > Yes"
+        INSTALL_MJPG="true"
+        break;;
+      N|n|No|no)
+        echo -e "###### > No"
+        INSTALL_MJPG="false"
+        break;;
+      *)
+        print_unkown_cmd
+        print_msg && clear_msg;;
+    esac
+  done
+}
+
+get_user_selection_kiauh_macros(){
+  #ask user for webui default macros
+  while true; do
+    unset ADD_KIAUH_MACROS
+    echo
+    top_border
+    echo -e "| It is recommended to have some important macros set   |"
+    echo -e "| up in your printer configuration to have $1|"
+    echo -e "| fully functional and working.                         |"
+    blank_line
+    echo -e "| Those macros are:                                     |"
+    echo -e "| ${cyan}● [gcode_macro PAUSE]${default}                                 |"
+    echo -e "| ${cyan}● [gcode_macro RESUME]${default}                                |"
+    echo -e "| ${cyan}● [gcode_macro CANCEL_PRINT]${default}                          |"
+    blank_line
+    echo -e "| If you already have these macros in your config file  |"
+    echo -e "| you can skip this step and choose 'no'.               |"
+    echo -e "| Otherwise you should consider to answer with 'yes' to |"
+    echo -e "| add the recommended example macros to your config.    |"
+    bottom_border
+    read -p "${cyan}###### Add the recommended macros? (Y/n):${default} " yn
+    case "$yn" in
+      Y|y|Yes|yes|"")
+        echo -e "###### > Yes"
+        ADD_KIAUH_MACROS="true"
+        break;;
+      N|n|No|no)
+        echo -e "###### > No"
+        ADD_KIAUH_MACROS="false"
+        break;;
+      *)
+        print_unkown_cmd
+        print_msg && clear_msg;;
+    esac
+  done
+}
+
+install_webui(){
+  source_kiauh_ini
+  ### checking dependencies
+  dep=(nginx)
+  dependency_check
+  ### check if moonraker is already installed
+  system_check_webui
+  ### ask user how to handle OctoPrint, Haproxy, Lighttpd, Apache2 if found
+  process_octoprint_dialog
+  process_services_dialog
+  ### process possible disruptive services
+  process_disruptive_services
+
+  [ "$1" == "mainsail" ] && IF_NAME1="Mainsail" && IF_NAME2="Mainsail     "
+  [ "$1" == "fluidd" ] && IF_NAME1="Fluidd" && IF_NAME2="Fluidd       "
+
+  ### exit mainsail/fluidd setup if moonraker not found
+  if [ $moonraker_chk_ok = "false" ]; then
+    ERROR_MSG="Moonraker service not found!\n Please install Moonraker first!"
+    print_msg && clear_msg && return 0
+  fi
+
+  status_msg "Initializing $IF_NAME1 installation ..."
+  ### check for other enabled web interfaces
+  unset SET_LISTEN_PORT
+  detect_enabled_sites
+
+  ### check if another site already listens to port 80
+  $1_port_check
+
+  ### ask user to install mjpg-streamer
+  if ! ls /etc/systemd/system/webcamd.service 2>/dev/null 1>&2; then
+    get_user_selection_mjpg-streamer
+  fi
+
+  ### ask user to install the recommended webinterface macros
+  if ! ls "$klipper_cfg_loc"/kiauh_macros.cfg 2>/dev/null 1>&2 || ! ls "$klipper_cfg_loc"/printer_*/kiauh_macros.cfg 2>/dev/null 1>&2; then
+    get_user_selection_kiauh_macros "$IF_NAME2"
+  fi
+  ### create /etc/nginx/conf.d/upstreams.conf
+  set_upstream_nginx_cfg
+  ### create /etc/nginx/sites-available/<interface config>
+  set_nginx_cfg "$1"
+
+  ### symlink nginx log
+  symlink_webui_nginx_log "$1"
+
+  ### copy the kiauh_macros.cfg to the config location
+  install_kiauh_macros
+
+  ### install mainsail/fluidd
+  $1_setup
+
+  ### install mjpg-streamer
+  [ "$INSTALL_MJPG" = "true" ] && install_mjpg-streamer
+
+  fetch_webui_ports #WIP
+
+  ### confirm message
+  CONFIRM_MSG="$IF_NAME1 has been set up!"
+  print_msg && clear_msg
+}
+
+symlink_webui_nginx_log(){
+  LPATH="${HOME}/klipper_logs"
+  UI_ACCESS_LOG="/var/log/nginx/$1-access.log"
+  UI_ERROR_LOG="/var/log/nginx/$1-error.log"
+  [ ! -d "$LPATH" ] && mkdir -p "$LPATH"
+  if [ -f "$UI_ACCESS_LOG" ] &&  [ ! -L "$LPATH/$1-access.log" ]; then
+    status_msg "Creating symlink for $UI_ACCESS_LOG ..."
+    ln -s "$UI_ACCESS_LOG" "$LPATH"
+    ok_msg "OK!"
+  fi
+  if [ -f "$UI_ERROR_LOG" ] &&  [ ! -L "$LPATH/$1-error.log" ]; then
+    status_msg "Creating symlink for $UI_ERROR_LOG ..."
+    ln -s "$UI_ERROR_LOG" "$LPATH"
+    ok_msg "OK!"
+  fi
+}
+
+install_kiauh_macros(){
+  source_kiauh_ini
+  ### copy kiauh_macros.cfg
+  if [ "$ADD_KIAUH_MACROS" = "true" ]; then
+    ### create a backup of the config folder
+    backup_klipper_config_dir
+    ### handle multi printer.cfg
+    if ls "$klipper_cfg_loc"/printer_* 2>/dev/null 1>&2; then
+      for config in $(find $klipper_cfg_loc/printer_*/printer.cfg); do
+        path=$(echo "$config" | rev | cut -d"/" -f2- | rev)
+        if [ ! -f "$path/kiauh_macros.cfg" ]; then
+          ### copy kiauh_macros.cfg to config location
+          status_msg "Creating macro config file ..."
+          cp "${SRCDIR}/kiauh/resources/kiauh_macros.cfg" "$path"
+          ### write the include to the very first line of the printer.cfg
+          sed -i "1 i [include kiauh_macros.cfg]" "$path/printer.cfg"
+          ok_msg "$path/kiauh_macros.cfg created!"
+        fi
+      done
+    ### handle single printer.cfg
+    elif [ -f "$klipper_cfg_loc/printer.cfg" ] && [ ! -f "$klipper_cfg_loc/kiauh_macros.cfg" ]; then
+      ### copy kiauh_macros.cfg to config location
+      status_msg "Creating macro config file ..."
+      cp "${SRCDIR}/kiauh/resources/kiauh_macros.cfg" "$klipper_cfg_loc"
+      ### write the include to the very first line of the printer.cfg
+      sed -i "1 i [include kiauh_macros.cfg]" "$klipper_cfg_loc/printer.cfg"
+      ok_msg "$klipper_cfg_loc/kiauh_macros.cfg created!"
+    fi
+    ### restart klipper service to parse the modified printer.cfg
+    do_action_service "restart" "klipper"
+  fi
+}
+
+mainsail_port_check(){
+  if [ "$MAINSAIL_ENABLED" = "false" ]; then
+    if [ "$SITE_ENABLED" = "true" ]; then
+      status_msg "Detected other enabled interfaces:"
+      [ "$OCTOPRINT_ENABLED" = "true" ] && echo -e "   ${cyan}● OctoPrint - Port: $OCTOPRINT_PORT${default}"
+      [ "$FLUIDD_ENABLED" = "true" ] && echo -e "   ${cyan}● Fluidd - Port: $FLUIDD_PORT${default}"
+      [ "$DWC2_ENABLED" = "true" ] && echo -e "   ${cyan}● DWC2 - Port: $DWC2_PORT${default}"
+      if [ "$FLUIDD_PORT" = "80" ] || [ "$DWC2_PORT" = "80" ] || [ "$OCTOPRINT_PORT" = "80" ]; then
+        PORT_80_BLOCKED="true"
+        select_mainsail_port
+      fi
+    else
+      DEFAULT_PORT=$(grep listen "${SRCDIR}/kiauh/resources/klipper_webui_nginx.cfg" | head -1 | sed 's/^\s*//' | cut -d" " -f2 | cut -d";" -f1)
+      SET_LISTEN_PORT=$DEFAULT_PORT
+    fi
+    SET_NGINX_CFG="true"
+  else
+    SET_NGINX_CFG="false"
+  fi
+}
+
+fluidd_port_check(){
+  if [ "$FLUIDD_ENABLED" = "false" ]; then
+    if [ "$SITE_ENABLED" = "true" ]; then
+      status_msg "Detected other enabled interfaces:"
+      [ "$OCTOPRINT_ENABLED" = "true" ] && echo "   ${cyan}● OctoPrint - Port: $OCTOPRINT_PORT${default}"
+      [ "$MAINSAIL_ENABLED" = "true" ] && echo "   ${cyan}● Mainsail - Port: $MAINSAIL_PORT${default}"
+      [ "$DWC2_ENABLED" = "true" ] && echo "   ${cyan}● DWC2 - Port: $DWC2_PORT${default}"
+      if [ "$MAINSAIL_PORT" = "80" ] || [ "$DWC2_PORT" = "80" ] || [ "$OCTOPRINT_PORT" = "80" ]; then
+        PORT_80_BLOCKED="true"
+        select_fluidd_port
+      fi
+    else
+      DEFAULT_PORT=$(grep listen "${SRCDIR}/kiauh/resources/klipper_webui_nginx.cfg" | head -1 | sed 's/^\s*//' | cut -d" " -f2 | cut -d";" -f1)
+      SET_LISTEN_PORT=$DEFAULT_PORT
+    fi
+    SET_NGINX_CFG="true"
+  else
+    SET_NGINX_CFG="false"
+  fi
+}
+
+select_mainsail_port(){
+  if [ "$PORT_80_BLOCKED" = "true" ]; then
+    echo
+    top_border
+    echo -e "|                    ${red}!!!WARNING!!!${default}                      |"
+    echo -e "| ${red}You need to choose a different port for Mainsail!${default}     |"
+    echo -e "| ${red}The following web interface is listening at port 80:${default}  |"
+    blank_line
+    [ "$OCTOPRINT_PORT" = "80" ] && echo "|  ● OctoPrint                                          |"
+    [ "$FLUIDD_PORT" = "80" ] && echo "|  ● Fluidd                                             |"
+    [ "$DWC2_PORT" = "80" ] && echo "|  ● DWC2                                               |"
+    blank_line
+    echo -e "| Make sure you don't choose a port which was already   |"
+    echo -e "| assigned to one of the other webinterfaces and do ${red}NOT${default} |"
+    echo -e "| use ports in the range of 4750 or above!              |"
+    blank_line
+    echo -e "| Be aware: there is ${red}NO${default} sanity check for the following  |"
+    echo -e "| input. So make sure to choose a valid port!           |"
+    bottom_border
+    while true; do
+      read -p "${cyan}Please enter a new Port:${default} " NEW_PORT
+      if [ "$NEW_PORT" != "$FLUIDD_PORT" ] && [ "$NEW_PORT" != "$DWC2_PORT" ] && [ "$NEW_PORT" != "$OCTOPRINT_PORT" ]; then
+        echo "Setting port $NEW_PORT for Mainsail!"
+        SET_LISTEN_PORT=$NEW_PORT
+        break
+      else
+        echo "That port is already taken! Select a different one!"
+      fi
+    done
+  fi
+}
+
+select_fluidd_port(){
+  if [ "$PORT_80_BLOCKED" = "true" ]; then
+    echo
+    top_border
+    echo -e "|                    ${red}!!!WARNING!!!${default}                      |"
+    echo -e "| ${red}You need to choose a different port for Fluidd!${default}       |"
+    echo -e "| ${red}The following web interface is listening at port 80:${default}  |"
+    blank_line
+    [ "$OCTOPRINT_PORT" = "80" ] && echo "|  ● OctoPrint                                          |"
+    [ "$MAINSAIL_PORT" = "80" ] && echo "|  ● Mainsail                                           |"
+    [ "$DWC2_PORT" = "80" ] && echo "|  ● DWC2                                               |"
+    blank_line
+    echo -e "| Make sure you don't choose a port which was already   |"
+    echo -e "| assigned to one of the other webinterfaces and do ${red}NOT${default} |"
+    echo -e "| use ports in the range of 4750 or above!              |"
+    blank_line
+    echo -e "| Be aware: there is ${red}NO${default} sanity check for the following  |"
+    echo -e "| input. So make sure to choose a valid port!           |"
+    bottom_border
+    while true; do
+      read -p "${cyan}Please enter a new Port:${default} " NEW_PORT
+      if [ "$NEW_PORT" != "$MAINSAIL_PORT" ] && [ "$NEW_PORT" != "$DWC2_PORT" ] && [ "$NEW_PORT" != "$OCTOPRINT_PORT" ]; then
+        echo "Setting port $NEW_PORT for Fluidd!"
+        SET_LISTEN_PORT=$NEW_PORT
+        break
+      else
+        echo "That port is already taken! Select a different one!"
+      fi
+    done
+  fi
+}
+
+get_mainsail_ver(){
+  MAINSAIL_VERSION=$(curl -s $MAINSAIL_REPO_API | grep tag_name | cut -d'"' -f4 | head -1)
+}
+
+get_fluidd_ver(){
+  FLUIDD_VERSION=$(curl -s $FLUIDD_REPO_API | grep tag_name | cut -d'"' -f4 | head -1)
+}
+
+mainsail_setup(){
+  ### get mainsail download url
+  MAINSAIL_DL_URL=$(curl -s $MAINSAIL_REPO_API | grep browser_download_url | cut -d'"' -f4 | head -1)
+
+  ### remove existing and create fresh mainsail folder, then download mainsail
+  [ -d "$MAINSAIL_DIR" ] && rm -rf "$MAINSAIL_DIR"
+  mkdir "$MAINSAIL_DIR" && cd $MAINSAIL_DIR
+  status_msg "Downloading Mainsail $MAINSAIL_VERSION ..."
+  wget "$MAINSAIL_DL_URL" && ok_msg "Download complete!"
+
+  ### extract archive
+  status_msg "Extracting archive ..."
+  unzip -q -o *.zip && ok_msg "Done!"
+
+  ### delete downloaded zip
+  status_msg "Remove downloaded archive ..."
+  rm -rf *.zip && ok_msg "Done!"
+
+  ### check for moonraker multi-instance and if multi-instance was found, enable mainsails remoteMode
+  if [ $(ls /etc/systemd/system/moonraker* | grep -E "moonraker(-[[:digit:]]+)?\.service" | wc -l) -gt 1 ]; then
+    enable_mainsail_remotemode
+  fi
+}
+
+enable_mainsail_remotemode(){
+  rm -f "$MAINSAIL_DIR/config.json"
+  echo -e "{\n    \"remoteMode\":true\n}" >> "$MAINSAIL_DIR/config.json"
+}
+
+fluidd_setup(){
+  ### get fluidd download url
+  FLUIDD_DL_URL=$(curl -s $FLUIDD_REPO_API | grep browser_download_url | cut -d'"' -f4 | head -1)
+
+  ### remove existing and create fresh fluidd folder, then download fluidd
+  [ -d "$FLUIDD_DIR" ] && rm -rf "$FLUIDD_DIR"
+  mkdir "$FLUIDD_DIR" && cd $FLUIDD_DIR
+  status_msg "Downloading Fluidd $FLUIDD_VERSION ..."
+  wget "$FLUIDD_DL_URL" && ok_msg "Download complete!"
+
+  ### extract archive
+  status_msg "Extracting archive ..."
+  unzip -q -o *.zip && ok_msg "Done!"
+
+  ### delete downloaded zip
+  status_msg "Remove downloaded archive ..."
+  rm -rf *.zip && ok_msg "Done!"
+}
+
+set_upstream_nginx_cfg(){
+  get_date
+  ### backup existing nginx configs
+  [ ! -d "$BACKUP_DIR/nginx_cfg" ] && mkdir -p "$BACKUP_DIR/nginx_cfg"
+  [ -f "$NGINX_CONFD/upstreams.conf" ] && sudo mv "$NGINX_CONFD/upstreams.conf" "$BACKUP_DIR/nginx_cfg/${current_date}_upstreams.conf"
+  [ -f "$NGINX_CONFD/common_vars.conf" ] && sudo mv "$NGINX_CONFD/common_vars.conf" "$BACKUP_DIR/nginx_cfg/${current_date}_common_vars.conf"
+  ### transfer ownership of backed up files from root to ${USER}
+  for log in $(ls "$BACKUP_DIR/nginx_cfg"); do
+    sudo chown "${USER}" "$BACKUP_DIR/nginx_cfg/$log"
+  done
+  ### copy nginx configs to target destination
+  if [ ! -f "$NGINX_CONFD/upstreams.conf" ]; then
+    sudo cp "${SRCDIR}/kiauh/resources/upstreams.conf" "$NGINX_CONFD"
+  fi
+  if [ ! -f "$NGINX_CONFD/common_vars.conf" ]; then
+    sudo cp "${SRCDIR}/kiauh/resources/common_vars.conf" "$NGINX_CONFD"
+  fi
+}
+
+fetch_webui_ports(){
+  ### read listen ports from possible installed interfaces
+  ### and write them to ~/.kiauh.ini
+  WEBIFS=(mainsail fluidd octoprint dwc2)
+  for interface in "${WEBIFS[@]}"; do
+    if [ -f "/etc/nginx/sites-available/${interface}" ]; then
+      port=$(grep -E "listen" "/etc/nginx/sites-available/$interface" | head -1 | sed 's/^\s*//' | sed 's/;$//' | cut -d" " -f2)
+      if [ ! -n "$(grep -E "${interface}_port" "$INI_FILE")" ]; then
+        sed -i '$a'"${interface}_port=${port}" "$INI_FILE"
+      else
+        sed -i "/^${interface}_port/d" "$INI_FILE"
+        sed -i '$a'"${interface}_port=${port}" "$INI_FILE"
+      fi
+    else
+        sed -i "/^${interface}_port/d" "$INI_FILE"
+    fi
+  done
+}
+
+match_nginx_configs(){
+  ### reinstall nginx configs if the amount of upstreams don't match anymore
+  source_kiauh_ini
+  cfg_updated="false"
+  mainsail_nginx_cfg="/etc/nginx/sites-available/mainsail"
+  fluidd_nginx_cfg="/etc/nginx/sites-available/fluidd"
+  upstreams_webcams=$(grep -E "mjpgstreamer" /etc/nginx/conf.d/upstreams.conf | wc -l)
+  status_msg "Checking validity of NGINX configurations ..."
+  if [ -e "$mainsail_nginx_cfg" ]; then
+    mainsail_webcams=$(grep -E "mjpgstreamer" "$mainsail_nginx_cfg" | wc -l)
+  fi
+  if [ -e "$fluidd_nginx_cfg" ]; then
+    fluidd_webcams=$(grep -E "mjpgstreamer" "$fluidd_nginx_cfg" | wc -l)
+  fi
+  ### check for outdated upstreams.conf
+  if [[ "$upstreams_webcams" -lt "$mainsail_webcams" ]] || [[ "$upstreams_webcams" -lt "$fluidd_webcams" ]]; then
+    status_msg "Outdated upstreams.conf found! Updating ..."
+    sudo rm -f "$NGINX_CONFD/upstreams.conf"
+    sudo rm -f "$NGINX_CONFD/common_vars.conf"
+    set_upstream_nginx_cfg
+    cfg_updated="true"
+  fi
+  ### check for outdated mainsail config
+  if [ -e "$mainsail_nginx_cfg" ]; then
+    if [[ "$upstreams_webcams" -gt "$mainsail_webcams" ]]; then
+      status_msg "Outdated Mainsail config found! Updating ..."
+      sudo rm -f "$mainsail_nginx_cfg"
+      sudo cp "${SRCDIR}/kiauh/resources/klipper_webui_nginx.cfg" "$mainsail_nginx_cfg"
+      sudo sed -i "s/<<UI>>/mainsail/g" "$mainsail_nginx_cfg"
+      sudo sed -i "/root/s/pi/${USER}/" "$mainsail_nginx_cfg"
+      sudo sed -i "s/listen\s[0-9]*;/listen $mainsail_port;/" "$mainsail_nginx_cfg"
+      sudo sed -i "s/listen\s\[\:*\]\:[0-9]*;/listen \[::\]\:$mainsail_port;/" "$mainsail_nginx_cfg"
+      cfg_updated="true" && ok_msg "Done!"
+    fi
+  fi
+  ### check for outdated fluidd config
+  if [ -e "$fluidd_nginx_cfg" ]; then
+    if [[ "$upstreams_webcams" -gt "$fluidd_webcams" ]]; then
+      status_msg "Outdated Fluidd config found! Updating ..."
+      sudo rm -f "$fluidd_nginx_cfg"
+      sudo cp "${SRCDIR}/kiauh/resources/klipper_webui_nginx.cfg" "$fluidd_nginx_cfg"
+      sudo sed -i "s/<<UI>>/fluidd/g" "$fluidd_nginx_cfg"
+      sudo sed -i "/root/s/pi/${USER}/" "$fluidd_nginx_cfg"
+      sudo sed -i "s/listen\s[0-9]*;/listen $fluidd_port;/" "$fluidd_nginx_cfg"
+      sudo sed -i "s/listen\s\[\:*\]\:[0-9]*;/listen \[::\]\:$fluidd_port;/" "$fluidd_nginx_cfg"
+      cfg_updated="true" && ok_msg "Done!"
+    fi
+  fi
+  ### only restart nginx if configs were updated
+  if [ "$cfg_updated" == "true" ]; then
+    restart_nginx && unset cfg_updated
+  fi
+}
+
+process_octoprint_dialog(){
+  #ask user to disable octoprint when its service was found
+  if [ "$OCTOPRINT_ENABLED" = "true" ]; then
+    while true; do
+      echo
+      top_border
+      echo -e "|       ${red}!!! WARNING - OctoPrint service found !!!${default}       |"
+      hr
+      echo -e "|  You might consider disabling the OctoPrint service,  |"
+      echo -e "|  since an active OctoPrint service may lead to unex-  |"
+      echo -e "|  pected behavior of the Klipper Webinterfaces.        |"
+      bottom_border
+      read -p "${cyan}###### Do you want to disable OctoPrint now? (Y/n):${default} " yn
+      case "$yn" in
+        Y|y|Yes|yes|"")
+          echo -e "###### > Yes"
+          status_msg "Stopping OctoPrint ..."
+          do_action_service "stop" "octoprint" && ok_msg "OctoPrint service stopped!"
+          status_msg "Disabling OctoPrint ..."
+          do_action_service "disable" "octoprint" && ok_msg "OctoPrint service disabled!"
+          break;;
+        N|n|No|no)
+          echo -e "###### > No"
+          break;;
+        *)
+          print_unkown_cmd
+          print_msg && clear_msg;;
+      esac
+    done
+  fi
+}
+
+process_disruptive_services(){
+  #handle haproxy service
+  if [ "$DISABLE_HAPROXY" = "true" ] || [ "$REMOVE_HAPROXY" = "true" ]; then
+    if systemctl is-active haproxy -q; then
+      status_msg "Stopping haproxy service ..."
+      sudo systemctl stop haproxy && ok_msg "Service stopped!"
+    fi
+
+    ### disable haproxy
+    if [ "$DISABLE_HAPROXY" = "true" ]; then
+      status_msg "Disabling haproxy ..."
+      sudo systemctl disable haproxy && ok_msg "Haproxy service disabled!"
+
+      ### remove haproxy
+      if [ "$REMOVE_HAPROXY" = "true" ]; then
+        status_msg "Removing haproxy ..."
+        sudo apt-get remove haproxy -y && sudo update-rc.d -f haproxy remove && ok_msg "Haproxy removed!"
+      fi
+    fi
+  fi
+
+  ### handle lighttpd service
+  if [ "$DISABLE_LIGHTTPD" = "true" ] || [ "$REMOVE_LIGHTTPD" = "true" ]; then
+    if systemctl is-active lighttpd -q; then
+      status_msg "Stopping lighttpd service ..."
+      sudo systemctl stop lighttpd && ok_msg "Service stopped!"
+    fi
+
+    ### disable lighttpd
+    if [ "$DISABLE_LIGHTTPD" = "true" ]; then
+      status_msg "Disabling lighttpd ..."
+      sudo systemctl disable lighttpd && ok_msg "Lighttpd service disabled!"
+
+      ### remove lighttpd
+      if [ "$REMOVE_LIGHTTPD" = "true" ]; then
+        status_msg "Removing lighttpd ..."
+        sudo apt-get remove lighttpd -y && sudo update-rc.d -f lighttpd remove && ok_msg "Lighttpd removed!"
+      fi
+    fi
+  fi
+
+  ### handle apache2 service
+  if [ "$DISABLE_APACHE2" = "true" ] || [ "$REMOVE_APACHE2" = "true" ]; then
+    if systemctl is-active apache2 -q; then
+      status_msg "Stopping apache2 service ..."
+      sudo systemctl stop apache2 && ok_msg "Service stopped!"
+    fi
+
+    ### disable lighttpd
+    if [ "$DISABLE_APACHE2" = "true" ]; then
+      status_msg "Disabling lighttpd ..."
+      sudo systemctl disable apache2 && ok_msg "Apache2 service disabled!"
+
+      ### remove lighttpd
+      if [ "$REMOVE_APACHE2" = "true" ]; then
+        status_msg "Removing apache2 ..."
+        sudo apt-get remove apache2 -y && sudo update-rc.d -f apache2 remove && ok_msg "Apache2 removed!"
+      fi
+    fi
+  fi
+}
+
+process_services_dialog(){
+  #notify user about haproxy or lighttpd services found and possible issues
+  if [ "$HAPROXY_FOUND" = "true" ] || [ "$LIGHTTPD_FOUND" = "true" ] || [ "$APACHE2_FOUND" = "true" ]; then
+    while true; do
+      echo
+      top_border
+      echo -e "| ${red}Possibly disruptive/incompatible services found!${default}      |"
+      hr
+      if [ "$HAPROXY_FOUND" = "true" ]; then
+        echo -e "| ● haproxy                                             |"
+      fi
+      if [ "$LIGHTTPD_FOUND" = "true" ]; then
+        echo -e "| ● lighttpd                                            |"
+      fi
+      if [ "$APACHE2_FOUND" = "true" ]; then
+        echo -e "| ● apache2                                             |"
+      fi
+      hr
+      echo -e "| Having those packages installed can lead to unwanted  |"
+      echo -e "| behaviour. It is recommend to remove those packages.  |"
+      echo -e "|                                                       |"
+      echo -e "| 1) Remove packages (recommend)                        |"
+      echo -e "| 2) Disable only (may cause issues)                    |"
+      echo -e "| ${red}3) Skip this step (not recommended)${default}                   |"
+      bottom_border
+      read -p "${cyan}###### Please choose:${default} " action
+      case "$action" in
+        1)
+          echo -e "###### > Remove packages"
+          REMOVE_HAPROXY="true"
+          REMOVE_LIGHTTPD="true"
+          REMOVE_APACHE2="true"
+          break;;
+        2)
+          echo -e "###### > Disable only"
+          DISABLE_HAPROXY="true"
+          DISABLE_LIGHTTPD="true"
+          DISABLE_APACHE2="true"
+          break;;
+        3)
+          echo -e "###### > Skip"
+          break;;
+        *)
+          print_unkown_cmd
+          print_msg && clear_msg;;
+      esac
+    done
+  fi
+}

scripts/install_klipperscreen.sh

@@ -0,0 +1,39 @@
+install_klipperscreen(){
+  python3_check
+  if [ $py_chk_ok = "true" ]; then
+    source_kiauh_ini
+    #KlipperScreen main installation
+    klipperscreen_setup
+    #after install actions
+    restart_klipperscreen
+  else
+    ERROR_MSG="Python 3.7 or above required!\n Please upgrade your Python version first."
+    print_msg && clear_msg
+  fi
+}
+
+python3_check(){
+  status_msg "Your Python 3 version is: $(python3 --version)"
+  major=$(python3 --version | cut -d" " -f2 | cut -d"." -f1)
+  minor=$(python3 --version | cut -d"." -f2)
+  if [ $major -ge 3 ] && [ $minor -ge 7 ]; then
+    ok_msg "Python version ok!"
+    py_chk_ok="true"
+  else
+    py_chk_ok="false"
+  fi
+}
+
+klipperscreen_setup(){
+  dep=(wget curl unzip dfu-util)
+  dependency_check
+  status_msg "Downloading KlipperScreen ..."
+  # force remove existing KlipperScreen dir
+  [ -d $KLIPPERSCREEN_DIR ] && rm -rf $KLIPPERSCREEN_DIR
+  # clone into fresh KlipperScreen dir
+  cd ${HOME} && git clone $KLIPPERSCREEN_REPO
+  ok_msg "Download complete!"
+  status_msg "Installing KlipperScreen ..."
+  $KLIPPERSCREEN_DIR/scripts/KlipperScreen-install.sh
+  ok_msg "KlipperScreen successfully installed!"
+}

scripts/install_mainsail.sh

@@ -1,349 +0,0 @@
-mainsail_install_routine(){
-  if [ -d $KLIPPER_DIR ]; then
-    #check for dependencies
-    dep=(wget curl unzip)
-    dep_check
-    #execute operation
-    install_moonraker
-    disable_wrong_webserver
-    remove_wrong_webserver
-    install_nginx
-    test_api
-    test_nginx
-    install_mainsail && ok_msg "Mainsail install complete!"; echo
-  else
-    ERROR_MSG=" Please install Klipper first!\n Skipping..."
-  fi
-}
-
-install_moonraker(){
-  cd $KLIPPER_DIR
-  if [[ $(git describe --all) = "remotes/Arksine/work-web_server-20200131" ]]; then
-    status_msg "Installing Moonraker ..."
-    $KLIPPER_DIR/scripts/install-moonraker.sh && ok_msg "Moonraker successfully installed!"
-    if [ ! -d ${HOME}/sdcard ]; then
-      mkdir ${HOME}/sdcard
-    fi
-    #create a moonraker.log symlink in home-dir just for convenience
-    if [ ! -e ${HOME}/moonraker.log ]; then
-      status_msg "Creating moonraker.log symlink ..."
-      ln -s /tmp/moonraker.log ${HOME}/moonraker.log && ok_msg "Symlink created!"
-    fi
-  else
-    warn_msg "You are not using Arksine/work-web_server-20200131."
-    warn_msg "Please switch to the moonraker fork first!"
-    while true; do
-      echo -e "${cyan}"
-      read -p "###### Do you want to switch to it now? (Y/n): " yn
-      echo -e "${default}"
-      case "$yn" in
-        Y|y|Yes|yes|"") switch_to_moonraker && install_moonraker; break;;
-        N|n|No|no) break;;
-           *) echo "Unknown parameter: $yn"; echo;;
-      esac
-    done
-  fi
-}
-
-check_printer_cfg(){
-  if [ ! -e $PRINTER_CFG ]; then
-    warn_msg "No printer.cfg found"
-    while true; do
-      echo -e "${cyan}"
-      read -p "###### Do you want to create a default config? (Y/n): " yn
-      echo -e "${default}"
-      case "$yn" in
-        Y|y|Yes|yes|"") create_default_cfg; break;;
-        N|n|No|no) break;;
-           *) echo "Unknown parameter: $yn"; echo;;
-      esac
-    done
-  else
-    check_vsdcard_section
-    check_api_section
-  fi
-}
-
-disable_wrong_webserver(){
-  if systemctl is-active haproxy ; then
-    status_msg "Stopping haproxy service ..."
-    sudo /etc/init.d/haproxy stop && ok_msg "Service stopped!"
-  fi
-  if systemctl is-active lighttpd ; then
-    status_msg "Stopping lighttpd service ..."
-    sudo /etc/init.d/lighttpd stop && ok_msg "Service stopped!"
-  fi
-}
-
-remove_wrong_webserver(){
-  rem=(haproxy lighttpd)
-  for remove in "${rem[@]}"
-  do
-    if [[ $(dpkg-query -f'${Status}' --show $remove 2>/dev/null) = *\ installed ]]; then
-      delete+=($remove)
-    fi
-  done
-  if ! [ ${#delete[@]} -eq 0 ]; then
-    sudo apt-get remove ${delete[@]} -y
-  fi
-}
-
-install_nginx(){
-  if ! [[ $(dpkg-query -f'${Status}' --show nginx 2>/dev/null) = *\ installed ]]; then
-    status_msg "Installing Nginx ..."
-    sudo apt-get install nginx -y && ok_msg "Nginx successfully installed!"
-  fi
-  if [ ! -d $MAINSAIL_DIR ]; then
-    mkdir $MAINSAIL_DIR
-  fi
-  status_msg "Configure Nginx ..."
-  create_mainsail_cfgfile && sudo mv $MAINSAIL_DIR/mainsail /etc/nginx/sites-available/
-  if [ -e /etc/nginx/sites-enabled/default ]; then
-    sudo rm /etc/nginx/sites-enabled/default
-  fi
-  if [ ! -e /etc/nginx/sites-enabled/mainsail ]; then
-    sudo ln -s /etc/nginx/sites-available/mainsail /etc/nginx/sites-enabled/
-  fi
-  ok_msg "Nginx configured!"
-}
-
-test_api(){
-  status_msg "Testing API ..."
-  sleep 5
-  status_msg "API response from http://localhost:7125/printer/info:"
-  API_RESPONSE="$(curl -sG4 http://localhost:7125/printer/info)"
-  echo -e "${cyan}$API_RESPONSE${default}"
-  if [ $(curl -sG4 "http://localhost:7125/printer/info" | grep '^{"result"' -c) -eq 1 ]; then
-    echo; ok_msg "Klipper API is working correctly!"; echo
-  else
-    echo; warn_msg "Klipper API not working correctly!"; echo
-  fi
-}
-
-test_nginx(){
-  sudo /etc/init.d/nginx restart
-  status_msg "Testing Nginx ..."
-  sleep 5
-  status_msg "API response from http://localhost/printer/info:"
-  API_RESPONSE="$(curl -sG4 http://localhost/printer/info)"
-  echo -e "${cyan}$API_RESPONSE${default}"
-  if [ $(curl -sG4 "http://localhost/printer/info" | grep '^{"result"' -c) -eq 1 ]; then
-    echo; ok_msg "Nginx is working correctly!"; echo
-  else
-    echo; warn_msg "Nginx is not working correctly!"; echo
-  fi
-}
-
-get_mainsail_ver(){
-  MAINSAIL_VERSION=`curl -s https://api.github.com/repositories/240875926/tags | grep name | cut -d'"' -f4 | cut -d"v" -f2 | head -1`
-}
-
-mainsail_dl_url(){
-  get_mainsail_ver
-  MAINSAIL_URL=https://github.com/meteyou/mainsail/releases/download/v"$MAINSAIL_VERSION"/mainsail-alpha-"$MAINSAIL_VERSION".zip
-}
-
-install_mainsail(){
-  mainsail_dl_url
-  if [ ! -d $MAINSAIL_DIR ]; then
-    mkdir $MAINSAIL_DIR
-  fi
-  cd $MAINSAIL_DIR
-  status_msg "Downloading Mainsail v$MAINSAIL_VERSION ..."
-  wget -q -O mainsail.zip $MAINSAIL_URL && status_msg "Extracting archive ..." && unzip -o mainsail.zip && rm mainsail.zip
-  ### write mainsail version to file for update check reasons
-  echo "$MAINSAIL_VERSION" > $MAINSAIL_DIR/version
-}
-
-create_mainsail_cfgfile(){
-  cat <<MAINSAIL_CFG > $MAINSAIL_DIR/mainsail
-map \$http_upgrade \$connection_upgrade {
-    default upgrade;
-    '' close;
-}
-
-upstream apiserver {
-    #edit your api port here
-    ip_hash;
-    server 127.0.0.1:7125;
-}
-
-server {
-    listen 80 default_server;
-    listen [::]:80 default_server;
-
-    access_log /var/log/nginx/mainsail-access.log;
-    error_log /var/log/nginx/mainsail-error.log;
-
-    #web_path from mainsail static files
-    root /home/pi/mainsail;
-
-    index index.html;
-    server_name _;
-
-    #max upload size for gcodes
-    client_max_body_size 200M;
-
-    location / {
-        try_files \$uri \$uri/ /index.html;
-    }
-
-    location /printer {
-        proxy_pass http://apiserver/printer;
-        proxy_set_header Host \$http_host;
-        proxy_set_header X-Real-IP \$remote_addr;
-        proxy_set_header X-Forwarded-For \$proxy_add_x_forwarded_for;
-        proxy_set_header X-Scheme \$scheme;
-    }
-
-    location /api {
-        proxy_pass http://apiserver/api;
-        proxy_set_header Host \$http_host;
-        proxy_set_header X-Real-IP \$remote_addr;
-        proxy_set_header X-Forwarded-For \$proxy_add_x_forwarded_for;
-        proxy_set_header X-Scheme \$scheme;
-    }
-
-    location /access {
-        proxy_pass http://apiserver/access;
-        proxy_set_header Host \$http_host;
-        proxy_set_header X-Real-IP \$remote_addr;
-        proxy_set_header X-Forwarded-For \$proxy_add_x_forwarded_for;
-        proxy_set_header X-Scheme \$scheme;
-    }
-
-    location /websocket {
-        proxy_pass http://apiserver/websocket;
-        proxy_http_version 1.1;
-        proxy_set_header Upgrade \$http_upgrade;
-        proxy_set_header Connection \$connection_upgrade;
-        proxy_set_header Host \$http_host;
-        proxy_set_header X-Real-IP \$remote_addr;
-        proxy_set_header X-Forwarded-For \$proxy_add_x_forwarded_for;
-        proxy_read_timeout 86400;
-    }
-
-    location /machine {
-        proxy_pass http://apiserver/machine;
-        proxy_set_header Host \$http_host;
-        proxy_set_header X-Real-IP \$remote_addr;
-        proxy_set_header X-Forwarded-For \$proxy_add_x_forwarded_for;
-        proxy_set_header X-Scheme \$scheme;
-    }
-
-    location /server {
-        proxy_pass http://apiserver/server;
-        proxy_set_header Host \$http_host;
-        proxy_set_header X-Real-IP \$remote_addr;
-        proxy_set_header X-Forwarded-For \$proxy_add_x_forwarded_for;
-        proxy_set_header X-Scheme \$scheme;
-    }
-}
-MAINSAIL_CFG
-}
-
-check_vsdcard_section(){
-  # check if virtual sdcard is present in printer.cfg
-  if [ $(grep '^\[virtual_sdcard\]$' /home/pi/printer.cfg) ]; then
-    echo "Virtual sdcard already configured"
-  else
-    echo "No virtual sdcard entry found..."
-    echo "Configuring virtual sdcard..."
-# append the following lines to printer.cfg
-cat <<VSDCARD >> $PRINTER_CFG
-
-##########################
-### CREATED WITH KIAUH ###
-##########################
-[virtual_sdcard]
-path: ~/sdcard
-##########################
-##########################
-VSDCARD
-  fi
-}
-
-check_api_section(){
-  # check if api server is present in printer.cfg
-  if [ $(grep '^\[api_server\]$' /home/pi/printer.cfg) ]; then
-    echo "API server already configured"
-  else
-    echo "No API server entry found..."
-    echo "Configuring API server..."
-# append the following lines to printer.cfg
-cat <<API >> $PRINTER_CFG
-
-##########################
-### CREATED WITH KIAUH ###
-##########################
-[api_server]
-trusted_clients:
- 192.168.0.0/24
- 192.168.1.0/24
- 127.0.0.0/24
-##########################
-##########################
-API
-  fi
-}
-
-create_default_cfg(){
-cat <<MAINSAIL_CFG >> $PRINTER_CFG
-
-##########################
-### CREATED WITH KIAUH ###
-##########################
-[virtual_sdcard]
-path: ~/sdcard
-
-[api_server]
-trusted_clients:
- 192.168.0.0/24
- 192.168.1.0/24
- 127.0.0.0/24
-
-[pause_resume]
-
-[gcode_macro CANCEL]
-default_parameter_X: 230
-default_parameter_Y: 230
-default_parameter_Z: 10
-gcode:
-    M104 S0
-    M140 S0
-    M141 S0
-    M106 S0
-    CLEAR_PAUSE
-    RESET_SD
-
-[gcode_macro CANCEL_PRINT]
-gcode:
-    CANCEL
-
-[gcode_macro PAUSE]
-rename_existing: BASE_PAUSE
-default_parameter_X: 230
-default_parameter_Y: 230
-default_parameter_Z: 10
-gcode:
-    SAVE_GCODE_STATE NAME=PAUSE_state
-    BASE_PAUSE
-    G91
-    G1 E-1.7 F2100
-    G1 Z{Z}
-    G90
-    G1 X{X} Y{Y} F6000
-    G91
-
-[gcode_macro RESUME]
-rename_existing: BASE_RESUME
-gcode:
-    G91
-    G1 E1.7 F2100
-    G91
-    RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
-    BASE_RESUME
-##########################
-##########################
-MAINSAIL_CFG
-}

scripts/install_mjpg-streamer.sh

@@ -0,0 +1,132 @@
+### base variables
+SYSTEMDDIR="/etc/systemd/system"
+WEBCAMD_SRC="https://raw.githubusercontent.com/mainsail-crew/MainsailOS/master/src/modules/mjpgstreamer/filesystem/root/usr/local/bin/webcamd"
+WEBCAM_TXT_SRC="https://raw.githubusercontent.com/mainsail-crew/MainsailOS/master/src/modules/mjpgstreamer/filesystem/home/pi/klipper_config/webcam.txt"
+
+install_mjpg-streamer(){
+  check_klipper_cfg_path
+  source_kiauh_ini
+
+  ### set default values
+  MJPG_SERV_SRC="${SRCDIR}/kiauh/resources/webcamd.service"
+  MJPG_SERV_TARGET="$SYSTEMDDIR/webcamd.service"
+  WEBCAM_TXT="$klipper_cfg_loc/webcam.txt"
+
+  ### if there is a webcamd.service -> exit
+  if [ -f $MJPG_SERV_TARGET ]; then
+    ERROR_MSG="Looks like MJPG-streamer is already installed!\n Please remove it first before you try to re-install it!"
+    print_msg && clear_msg && return
+  fi
+
+  ### check and install dependencies if missing
+  dep=(git cmake build-essential imagemagick libv4l-dev ffmpeg)
+  if apt-cache search libjpeg62-turbo-dev | grep -Eq "^libjpeg62-turbo-dev "; then
+    dep+=(libjpeg62-turbo-dev)
+  elif apt-cache search libjpeg8-dev | grep -Eq "^libjpeg8-dev "; then
+    dep+=(libjpeg8-dev)
+  fi
+  dependency_check
+
+  ### step 1: clone moonraker
+  status_msg "Downloading MJPG-Streamer ..."
+  cd "${HOME}" && git clone https://github.com/jacksonliam/mjpg-streamer.git
+  ok_msg "Download complete!"
+
+  ### step 2: compiling mjpg-streamer
+  status_msg "Compiling MJPG-Streamer ..."
+  cd "${HOME}"/mjpg-streamer/mjpg-streamer-experimental && make
+  ok_msg "Compiling complete!"
+
+  #step 3: install mjpg-streamer
+  status_msg "Installing MJPG-Streamer ..."
+  cd "${HOME}"/mjpg-streamer && mv mjpg-streamer-experimental/* .
+  mkdir www-mjpgstreamer
+  cat <<EOT >> ./www-mjpgstreamer/index.html
+<html>
+<head><title>mjpg_streamer test page</title></head>
+<body>
+<h1>Snapshot</h1>
+<p>Refresh the page to refresh the snapshot</p>
+<img src="./?action=snapshot" alt="Snapshot">
+<h1>Stream</h1>
+<img src="./?action=stream" alt="Stream">
+</body>
+</html>
+EOT
+  sudo wget $WEBCAMD_SRC -O "/usr/local/bin/webcamd"
+  sudo sed -i "/^config_dir=/ s|=.*|=$klipper_cfg_loc|" /usr/local/bin/webcamd
+  sudo sed -i "/MJPGSTREAMER_HOME/ s/pi/${USER}/" /usr/local/bin/webcamd
+  sudo chmod +x /usr/local/bin/webcamd
+
+  ### step 4: create webcam.txt config file
+  [ ! -d "$klipper_cfg_loc" ] && mkdir -p "$klipper_cfg_loc"
+  if [ ! -f "$WEBCAM_TXT" ]; then
+    status_msg "Creating webcam.txt config file ..."
+    wget $WEBCAM_TXT_SRC -O "$WEBCAM_TXT"
+    ok_msg "Done!"
+  fi
+
+  ### step 5: create systemd service
+  status_msg "Creating MJPG-Streamer service ..."
+  sudo cp "$MJPG_SERV_SRC" $MJPG_SERV_TARGET
+  sudo sed -i "s|%USER%|${USER}|" $MJPG_SERV_TARGET
+  ok_msg "MJPG-Streamer service created!"
+
+  ### step 6: enabling and starting mjpg-streamer service
+  status_msg "Starting MJPG-Streamer service ..."
+  sudo systemctl enable webcamd.service
+  sudo systemctl start webcamd.service
+  ok_msg "MJPG-Streamer service started!"
+
+  ### step 6.1: create webcamd.log symlink
+  [ ! -d "${HOME}/klipper_logs" ] && mkdir -p "${HOME}/klipper_logs"
+  if [ -f "/var/log/webcamd.log" ] && [ ! -L "${HOME}/klipper_logs/webcamd.log" ]; then
+    ln -s "/var/log/webcamd.log" "${HOME}/klipper_logs/webcamd.log"
+  fi
+
+  ### step 6.2: add webcamd.log logrotate
+  if [ ! -f "/etc/logrotate.d/webcamd"  ]; then
+    status_msg "Create logrotate rule ..."
+    sudo /bin/sh -c "cat > /etc/logrotate.d/webcamd" << EOF
+/var/log/webcamd.log
+{
+    rotate 2
+    weekly
+    maxsize 32M
+    missingok
+    notifempty
+    compress
+    delaycompress
+    sharedscripts
+}
+EOF
+     ok_msg "Done!"
+  fi
+
+  ### step 7: check if user is in group "video"
+  usergroup_changed=false
+  USER_IN_VIDEO_GROUP=$(groups "${USER}" | grep "video")
+  if [ -z "$USER_IN_VIDEO_GROUP" ]; then
+    status_msg "Adding user ${USER} to group 'video' ..."
+    sudo usermod -a -G video "${USER}" && ok_msg "Done!"
+    usergroup_changed=true
+  else
+    ok_msg "User ${USER} already in group 'video'!"
+  fi
+
+  ### confirm message
+  CONFIRM_MSG="MJPG-Streamer has been set up!"
+  if [ "$usergroup_changed" == true ]; then
+    CONFIRM_MSG="${CONFIRM_MSG}\n ${yellow}INFO: Your User was added to a new group!${green}"
+    CONFIRM_MSG="${CONFIRM_MSG}\n ${yellow}You need to relog/restart for the group to be applied!${green}"
+  fi
+  print_msg && clear_msg
+
+  ### print webcam ip adress/url
+  IP=$(hostname -I | cut -d" " -f1)
+  WEBCAM_IP="http://$IP:8080/?action=stream"
+  WEBCAM_URL="http://$IP/webcam/?action=stream"
+  echo -e " ${cyan}● Webcam URL:${default} $WEBCAM_IP"
+  echo -e " ${cyan}● Webcam URL:${default} $WEBCAM_URL"
+  echo
+}

scripts/install_moonraker-telegram-bot.sh

@@ -0,0 +1,23 @@
+install_MoonrakerTelegramBot(){
+    source_kiauh_ini
+    #MoonrakerTelegramBot main installation
+    MoonrakerTelegramBot_setup
+    #after install actions
+    restart_MoonrakerTelegramBot
+}
+
+MoonrakerTelegramBot_setup(){
+  source_kiauh_ini
+  export klipper_cfg_loc
+  dep=(virtualenv)
+  dependency_check
+  status_msg "Downloading MoonrakerTelegramBot ..."
+  #force remove existing MoonrakerTelegramBot dir 
+  [ -d $MOONRAKER_TELEGRAM_BOT_DIR ] && rm -rf $MOONRAKER_TELEGRAM_BOT_DIR
+  #clone into fresh MoonrakerTelegramBot dir
+  cd ${HOME} && git clone $NLEF_REPO
+  ok_msg "Download complete!"
+  status_msg "Installing MoonrakerTelegramBot ..."
+  $MOONRAKER_TELEGRAM_BOT_DIR/scripts/install.sh 
+  echo; ok_msg "MoonrakerTelegramBot successfully installed!"
+}

scripts/install_moonraker.sh

@@ -0,0 +1,321 @@
+### base variables
+SYSTEMDDIR="/etc/systemd/system"
+MOONRAKER_ENV="${HOME}/moonraker-env"
+MOONRAKER_DIR="${HOME}/moonraker"
+MOONRAKER_REPO="https://github.com/Arksine/moonraker.git"
+
+system_check_moonraker(){
+  ### python 3 check
+  status_msg "Your Python 3 version is: $(python3 --version)"
+  major=$(python3 --version | cut -d" " -f2 | cut -d"." -f1)
+  minor=$(python3 --version | cut -d"." -f2)
+  if [ "$major" -ge 3 ] && [ "$minor" -ge 7 ]; then
+    py_chk_ok="true"
+  else
+    py_chk_ok="false"
+  fi
+}
+
+moonraker_setup_dialog(){
+  ### check for existing moonraker service installations
+  SERVICE_FILES=$(find "$SYSTEMDDIR" -regextype posix-extended -regex "$SYSTEMDDIR/moonraker(-[^0])?[0-9]*.service")
+  if [ -n "$SERVICE_FILES" ]; then
+    ERROR_MSG="At least one Moonraker service is already installed:"
+    for service in $SERVICE_FILES; do
+      ERROR_MSG="${ERROR_MSG}\n ➔ $service"
+    done && return
+  fi
+
+  status_msg "Initializing Moonraker installation ..."
+  ### checking system for python3.7+
+  system_check_moonraker
+  ### exit moonraker setup if python versioncheck fails
+  if [ $py_chk_ok = "false" ]; then
+    ERROR_MSG="Versioncheck failed! Python 3.7 or newer required!\n"
+    ERROR_MSG="${ERROR_MSG} Please upgrade Python."
+    print_msg && clear_msg && return
+  fi
+
+  ### count amount of klipper services
+  SERVICE_FILES=$(find "$SYSTEMDDIR" -regextype posix-extended -regex "$SYSTEMDDIR/klipper(-[^0])+[0-9]*.service")
+  if [ -f /etc/init.d/klipper ] || [ -f /etc/systemd/system/klipper.service ]; then
+    KLIPPER_COUNT=1
+  elif [ -n "$SERVICE_FILES" ]; then
+    KLIPPER_COUNT=$(echo "$SERVICE_FILES" | wc -l)
+  fi
+
+  ### initial moonraker.conf path check
+  check_klipper_cfg_path
+
+  top_border
+  if [[ $KLIPPER_COUNT -eq 1 ]]; then
+    printf "|${green}%-55s${default}|\n" " 1 Klipper instance was found!"
+  elif [[ $KLIPPER_COUNT -gt 1 ]]; then
+    printf "|${green}%-55s${default}|\n" " $KLIPPER_COUNT Klipper instances were found!"
+  else
+    echo -e "| ${yellow}INFO: No existing Klipper installation found!${default}         |"
+  fi
+  echo -e "| Usually you need one Moonraker instance per Klipper   |"
+  echo -e "| instance. Though you can install as many as you wish. |"
+  bottom_border
+  echo
+  count=""
+  while [[ ! ($count =~ ^[1-9]+((0)+)?$) ]]; do
+    read -p "${cyan}###### Number of Moonraker instances to set up:${default} " count
+    if [[ ! ($count =~ ^[1-9]+((0)+)?$) ]]; then
+      warn_msg "Invalid Input!\n"
+    else
+      echo
+      read -p "${cyan}###### Install $count instance(s)? (Y/n):${default} " yn
+      case "$yn" in
+        Y|y|Yes|yes|"")
+          echo -e "###### > Yes"
+          status_msg "Installing Moonraker ...\n"
+          moonraker_setup "$count"
+          break;;
+        N|n|No|no)
+          echo -e "###### > No"
+          warn_msg "Exiting Moonraker setup ...\n"
+          break;;
+        *)
+          print_unkown_cmd
+          print_msg && clear_msg;;
+      esac
+    fi
+  done
+}
+
+moonraker_setup(){
+  INSTANCE_COUNT=$1
+  ### checking dependencies
+  dep=(wget curl unzip dfu-util virtualenv)
+  ### additional deps for kiauh compatibility for armbian
+  dep+=(libjpeg-dev zlib1g-dev)
+  dependency_check
+
+  ### step 1: clone moonraker
+  status_msg "Downloading Moonraker ..."
+  ### force remove existing moonraker dir and clone into fresh moonraker dir
+  [ -d "$MOONRAKER_DIR" ] && rm -rf "$MOONRAKER_DIR"
+  cd "${HOME}" && git clone $MOONRAKER_REPO
+  ok_msg "Download complete!"
+
+  ### step 2: install moonraker dependencies and create python virtualenv
+  status_msg "Installing dependencies ..."
+  install_moonraker_packages
+  create_moonraker_virtualenv
+
+  ### step 3: create moonraker.conf folder and moonraker.confs
+  create_moonraker_conf
+
+  ### step 4: create final moonraker instances
+  create_moonraker_service
+
+  ### step 5: create polkit rules for moonraker
+  moonraker_polkit
+
+  ### confirm message
+  if [[ $INSTANCE_COUNT -eq 1 ]]; then
+    CONFIRM_MSG="Moonraker has been set up!"
+  elif [[ $INSTANCE_COUNT -gt 1 ]]; then
+    CONFIRM_MSG="$INSTANCE_COUNT Moonraker instances have been set up!"
+  fi && print_msg && clear_msg
+
+  ### display moonraker ips to the user
+  print_mr_ip_list; echo
+}
+
+install_moonraker_packages(){
+  ### read PKGLIST from official install script
+  status_msg "Reading dependencies..."
+  install_script="${HOME}/moonraker/scripts/install-moonraker.sh"
+  PKGLIST=$(grep "PKGLIST=" "$install_script" | sed 's/PKGLIST//g; s/[$"{}=]//g; s/\s\s*/ /g' | tr -d '\n')
+  for pkg in $PKGLIST; do
+    echo "${cyan}$pkg${default}"
+  done
+  read -r -a PKGLIST <<< "$PKGLIST"
+
+  ### Update system package info
+  status_msg "Running apt-get update..."
+  sudo apt-get update --allow-releaseinfo-change
+
+  ### Install desired packages
+  status_msg "Installing packages..."
+  sudo apt-get install --yes "${PKGLIST[@]}"
+}
+
+create_moonraker_virtualenv(){
+  status_msg "Installing python virtual environment..."
+
+  ### If venv exists and user prompts a rebuild, then do so
+  if [ -d "$MOONRAKER_ENV" ] && [ "$REBUILD_ENV" = "y" ]; then
+    status_msg "Removing old virtualenv"
+    rm -rf "$MOONRAKER_ENV"
+  fi
+
+  if [ ! -d "$MOONRAKER_ENV" ]; then
+    virtualenv -p /usr/bin/python3 "$MOONRAKER_ENV"
+  fi
+
+  ### Install/update dependencies
+  "$MOONRAKER_ENV"/bin/pip install -r "$MOONRAKER_DIR"/scripts/moonraker-requirements.txt
+}
+
+create_moonraker_service(){
+  ### get config directory
+  source_kiauh_ini
+
+  ### set up default values
+  SINGLE_INST=1
+  CFG_PATH="$klipper_cfg_loc"
+  MR_ENV=$MOONRAKER_ENV
+  MR_DIR=$MOONRAKER_DIR
+  MR_LOG="${HOME}/klipper_logs/moonraker.log"
+  MR_CONF="$CFG_PATH/moonraker.conf"
+  MR_SERV_SRC="${SRCDIR}/kiauh/resources/moonraker.service"
+  MR_SERV_TARGET="$SYSTEMDDIR/moonraker.service"
+
+  write_mr_service(){
+    if [ ! -f $MR_SERV_TARGET ]; then
+      status_msg "Creating Moonraker Service $i ..."
+        sudo cp "$MR_SERV_SRC" $MR_SERV_TARGET
+        sudo sed -i "s|%INST%|$i|" $MR_SERV_TARGET
+        sudo sed -i "s|%USER%|${USER}|" $MR_SERV_TARGET
+        sudo sed -i "s|%MR_ENV%|$MR_ENV|" $MR_SERV_TARGET
+        sudo sed -i "s|%MR_DIR%|$MR_DIR|" $MR_SERV_TARGET
+        sudo sed -i "s|%MR_LOG%|$MR_LOG|" $MR_SERV_TARGET
+        sudo sed -i "s|%MR_CONF%|$MR_CONF|" $MR_SERV_TARGET
+    fi
+  }
+
+  if [[ $SINGLE_INST -eq $INSTANCE_COUNT ]]; then
+    ### write single instance service
+    write_mr_service
+    ### enable instance
+    do_action_service "enable" "moonraker"
+    ok_msg "Single Moonraker instance created!"
+    ### launching instance
+    do_action_service "start" "moonraker"
+  else
+    i=1
+    while [[ $i -le $INSTANCE_COUNT ]]; do
+      ### rewrite default variables for multi instance cases
+      CFG_PATH="$klipper_cfg_loc/printer_$i"
+      MR_SERV_TARGET="$SYSTEMDDIR/moonraker-$i.service"
+      MR_CONF="$CFG_PATH/moonraker.conf"
+      MR_LOG="${HOME}/klipper_logs/moonraker-$i.log"
+      ### write multi instance service
+      write_mr_service
+      ### enable instance
+      do_action_service "enable" "moonraker-$i"
+      ok_msg "Moonraker instance #$i created!"
+      ### launching instance
+      do_action_service "start" "moonraker-$i"
+      ### raise values by 1
+      i=$((i+1))
+    done
+    unset i
+
+    ### enable mainsails remoteMode if mainsail is found
+    if [ -d "$MAINSAIL_DIR" ]; then
+      status_msg "Mainsail installation found!"
+      status_msg "Enabling Mainsail remoteMode ..."
+      enable_mainsail_remotemode
+      ok_msg "Mainsails remoteMode enabled!"
+    fi
+  fi
+}
+
+create_moonraker_conf(){
+  ### get config directory
+  source_kiauh_ini
+
+  ### set up default values
+  SINGLE_INST=1
+  PORT=7125
+  CFG_PATH="$klipper_cfg_loc"
+  LOG_PATH="${HOME}/klipper_logs"
+  MR_CONF="$CFG_PATH/moonraker.conf"
+  MR_DB="${HOME}/.moonraker_database"
+  KLIPPY_UDS="/tmp/klippy_uds"
+  MR_CONF_SRC="${SRCDIR}/kiauh/resources/moonraker.conf"
+  mr_ip_list=()
+  IP=$(hostname -I | cut -d" " -f1)
+  LAN="$(hostname -I | cut -d" " -f1 | cut -d"." -f1-2).0.0/16"
+
+  write_mr_conf(){
+    [ ! -d "$CFG_PATH" ] && mkdir -p "$CFG_PATH"
+    if [ ! -f "$MR_CONF" ]; then
+      status_msg "Creating moonraker.conf in $CFG_PATH ..."
+        cp "$MR_CONF_SRC" "$MR_CONF"
+        sed -i "s|%PORT%|$PORT|" "$MR_CONF"
+        sed -i "s|%CFG%|$CFG_PATH|" "$MR_CONF"
+        sed -i "s|%LOG%|$LOG_PATH|" "$MR_CONF"
+        sed -i "s|%MR_DB%|$MR_DB|" "$MR_CONF"
+        sed -i "s|%UDS%|$KLIPPY_UDS|" "$MR_CONF"
+        # if host ip is not in the default ip ranges, replace placeholder
+        # otherwise remove placeholder from config
+        if ! grep -q "$LAN" "$MR_CONF"; then
+          sed -i "s|%LAN%|$LAN|" "$MR_CONF"
+        else
+          sed -i "/%LAN%/d" "$MR_CONF"
+        fi
+        sed -i "s|%USER%|${USER}|g" "$MR_CONF"
+      ok_msg "moonraker.conf created!"
+    else
+      warn_msg "There is already a file called 'moonraker.conf'!"
+      warn_msg "Skipping..."
+    fi
+  }
+
+  if [[ $SINGLE_INST -eq $INSTANCE_COUNT ]]; then
+    ### write single instance config
+    write_mr_conf
+    mr_ip_list+=("$IP:$PORT")
+  else
+    i=1
+    while [[ $i -le $INSTANCE_COUNT ]]; do
+      ### rewrite default variables for multi instance cases
+      CFG_PATH="$klipper_cfg_loc/printer_$i"
+      MR_CONF="$CFG_PATH/moonraker.conf"
+      MR_DB="${HOME}/.moonraker_database_$i"
+      KLIPPY_UDS="/tmp/klippy_uds-$i"
+
+      ### write multi instance config
+      write_mr_conf
+      mr_ip_list+=("$IP:$PORT")
+
+      ### raise values by 1
+      PORT=$((PORT+1))
+      i=$((i+1))
+    done
+    unset PORT && unset i
+  fi
+}
+
+print_mr_ip_list(){
+  i=1
+  for ip in "${mr_ip_list[@]}"; do
+    echo -e "       ${cyan}● Instance $i:${default} $ip"
+    i=$((i + 1))
+  done
+}
+
+### introduced due to
+### https://github.com/Arksine/moonraker/issues/349
+### https://github.com/Arksine/moonraker/pull/346
+moonraker_polkit(){
+  SYSTEMDDIR="/etc/systemd/system"
+  MOONRAKER_SERVICES=$(find "$SYSTEMDDIR" -regextype posix-extended -regex "$SYSTEMDDIR/moonraker(-[^0])?[0-9]*.service")
+  for service in $MOONRAKER_SERVICES; do
+    HAS_SUPP="$( grep -cm1 "SupplementaryGroups=moonraker-admin" "$service" || true )"
+    if [ "$HAS_SUPP" -eq 0 ]; then
+      status_msg "Adding moonraker-admin supplementary group to $service ..."
+      sudo sed -i "/^Type=simple$/a SupplementaryGroups=moonraker-admin" "$service" \
+      && ok_msg "Adding moonraker-admin supplementary group successfull!"
+    fi
+  done
+  ### execute moonrakers policykit-rules script
+  "${HOME}"/moonraker/scripts/set-policykit-rules.sh
+  sudo systemctl daemon-reload
+}

scripts/install_octoprint.sh

@@ -0,0 +1,276 @@
+### base variables
+SYSTEMDDIR="/etc/systemd/system"
+OCTOPRINT_ENV="${HOME}/OctoPrint"
+
+octoprint_setup_dialog(){
+  status_msg "Initializing OctoPrint installation ..."
+
+  ### count amount of klipper services
+  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "klipper.service")" ]; then
+    INSTANCE_COUNT=1
+  else
+    INSTANCE_COUNT=$(systemctl list-units --full -all -t service --no-legend | grep -E "klipper-[[:digit:]].service" | wc -l)
+  fi
+
+  ### instance confirmation dialog
+  while true; do
+      echo
+      top_border
+      if [ $INSTANCE_COUNT -gt 1 ]; then
+        printf "|%-55s|\n" " $INSTANCE_COUNT Klipper instances were found!"
+      else
+        echo -e "| 1 Klipper instance was found!                         | "
+      fi
+      echo -e "| You need one OctoPrint instance per Klipper instance. | "
+      bottom_border
+      echo
+      read -p "${cyan}###### Create $INSTANCE_COUNT OctoPrint instances? (Y/n):${default} " yn
+      case "$yn" in
+        Y|y|Yes|yes|"")
+          echo -e "###### > Yes"
+          status_msg "Creating $INSTANCE_COUNT OctoPrint instances ..."
+          octoprint_setup
+          break;;
+        N|n|No|no)
+          echo -e "###### > No"
+          warn_msg "Exiting OctoPrint setup ..."
+          echo
+          break;;
+        *)
+          print_unkown_cmd
+          print_msg && clear_msg;;
+    esac
+  done
+}
+
+octoprint_dependencies(){
+  dep=(
+    git
+    wget
+    python-pip
+    python-dev
+    libyaml-dev
+    build-essential
+    python-setuptools
+    python-virtualenv
+    )
+  dependency_check
+}
+
+octoprint_setup(){
+  ### check and install all dependencies
+  octoprint_dependencies
+
+  ### add user to usergroups and add reboot permissions
+  add_to_groups
+  add_reboot_permission
+
+  ### create and activate the virtualenv
+  [ ! -d $OCTOPRINT_ENV ] && mkdir -p $OCTOPRINT_ENV
+  status_msg "Set up virtualenv ..."
+  cd $OCTOPRINT_ENV
+  virtualenv --python=python3 venv
+  source venv/bin/activate
+
+  ### install octoprint with pip
+  status_msg "Download and install OctoPrint ..."
+  pip install pip --upgrade
+  pip install --no-cache-dir octoprint
+  ok_msg "Download complete!"
+
+  ### leave virtualenv
+  deactivate
+
+  ### set up instances
+  INSTANCE=1
+  if [ $INSTANCE_COUNT -eq $INSTANCE ]; then
+    create_single_octoprint_instance
+  else
+    create_multi_octoprint_instance
+  fi
+}
+
+add_to_groups(){
+  if [ ! "$(groups | grep tty)" ]; then
+    status_msg "Adding user '${USER}' to group 'tty' ..."
+    sudo usermod -a -G tty ${USER} && ok_msg "Done!"
+  fi
+  if [ ! "$(groups | grep dialout)" ]; then
+    status_msg "Adding user '${USER}' to group 'dialout' ..."
+    sudo usermod -a -G dialout ${USER} && ok_msg "Done!"
+  fi
+}
+
+create_single_octoprint_startscript(){
+### create single instance systemd service file
+sudo /bin/sh -c "cat > ${SYSTEMDDIR}/octoprint.service" << OCTOPRINT
+[Unit]
+Description=Starts OctoPrint on startup
+After=network-online.target
+Wants=network-online.target
+
+[Service]
+Environment="LC_ALL=C.UTF-8"
+Environment="LANG=C.UTF-8"
+Type=simple
+User=$USER
+ExecStart=${OCTOPRINT_ENV}/venv/bin/octoprint --basedir ${BASEDIR} --config ${CONFIG_YAML} --port=${PORT} serve
+
+[Install]
+WantedBy=multi-user.target
+OCTOPRINT
+}
+
+create_multi_octoprint_startscript(){
+### create multi instance systemd service file
+sudo /bin/sh -c "cat > ${SYSTEMDDIR}/octoprint-$INSTANCE.service" << OCTOPRINT
+[Unit]
+Description=Starts OctoPrint instance $INSTANCE on startup
+After=network-online.target
+Wants=network-online.target
+
+[Service]
+Environment="LC_ALL=C.UTF-8"
+Environment="LANG=C.UTF-8"
+Type=simple
+User=$USER
+ExecStart=${OCTOPRINT_ENV}/venv/bin/octoprint --basedir ${BASEDIR} --config ${CONFIG_YAML} --port=${PORT} serve
+
+[Install]
+WantedBy=multi-user.target
+OCTOPRINT
+}
+
+create_config_yaml(){
+### create multi instance config.yaml file
+/bin/sh -c "cat > ${BASEDIR}/config.yaml" << CONFIGYAML
+serial:
+    additionalPorts:
+    - ${TMP_PRINTER}
+    disconnectOnErrors: false
+    port: ${TMP_PRINTER}
+server:
+    commands:
+        serverRestartCommand: ${RESTART_COMMAND}
+        systemRestartCommand: sudo shutdown -r now
+        systemShutdownCommand: sudo shutdown -h now
+CONFIGYAML
+}
+
+create_single_octoprint_instance(){
+  status_msg "Setting up 1 OctoPrint instance ..."
+
+  ### single instance variables
+  PORT=5000
+  BASEDIR="${HOME}/.octoprint"
+  TMP_PRINTER="/tmp/printer"
+  CONFIG_YAML="$BASEDIR/config.yaml"
+  RESTART_COMMAND="sudo service octoprint restart"
+
+  ### declare empty array for ips which get displayed to the user at the end of the setup
+  HOSTNAME=$(hostname -I | cut -d" " -f1)
+  op_ip_list=()
+
+  ### create instance
+  status_msg "Creating single OctoPrint instance ..."
+  create_single_octoprint_startscript
+  op_ip_list+=("$HOSTNAME:$PORT")
+
+  ### create the config.yaml
+  if [ ! -f $BASEDIR/config.yaml ]; then
+    status_msg "Creating config.yaml ..."
+    [ ! -d $BASEDIR ] && mkdir $BASEDIR
+    create_config_yaml
+    ok_msg "Config created!"
+  fi
+
+  ### enable instance
+  sudo systemctl enable octoprint.service
+  ok_msg "Single OctoPrint instance created!"
+
+  ### launching instance
+  status_msg "Launching OctoPrint instance ..."
+  sudo systemctl start octoprint
+
+  ### confirm message
+  CONFIRM_MSG="Single OctoPrint instance has been set up!"
+  print_msg && clear_msg
+
+  ### display all octoprint ips to the user
+  print_op_ip_list; echo
+}
+
+create_multi_octoprint_instance(){
+  status_msg "Setting up $INSTANCE_COUNT instances of OctoPrint ..."
+
+  ### declare empty array for ips which get displayed to the user at the end of the setup
+  HOSTNAME=$(hostname -I | cut -d" " -f1)
+  op_ip_list=()
+
+  ### default port
+  PORT=5000
+
+  while [ $INSTANCE -le $INSTANCE_COUNT ]; do
+    ### multi instance variables
+    BASEDIR="${HOME}/.octoprint-$INSTANCE"
+    TMP_PRINTER="/tmp/printer-$INSTANCE"
+    CONFIG_YAML="$BASEDIR/config.yaml"
+    RESTART_COMMAND="sudo service octoprint restart"
+
+    ### create instance
+    status_msg "Creating instance #$INSTANCE ..."
+    create_multi_octoprint_startscript
+    op_ip_list+=("$HOSTNAME:$PORT")
+
+    ### create the config.yaml
+    if [ ! -f $BASEDIR/config.yaml ]; then
+      status_msg "Creating config.yaml for instance #$INSTANCE..."
+      [ ! -d $BASEDIR ] && mkdir $BASEDIR
+      create_config_yaml
+      ok_msg "Config #$INSTANCE created!"
+    fi
+
+    ### enable instance
+    sudo systemctl enable octoprint-$INSTANCE.service
+    ok_msg "OctoPrint instance $INSTANCE created!"
+
+    ### launching instance
+    status_msg "Launching OctoPrint instance $INSTANCE ..."
+    sudo systemctl start octoprint-$INSTANCE
+
+    ### instance counter +1
+    INSTANCE=$(expr $INSTANCE + 1)
+
+    ### port +1
+    PORT=$(expr $PORT + 1)
+  done
+
+  ### confirm message
+  CONFIRM_MSG="$INSTANCE_COUNT OctoPrint instances have been set up!"
+  print_msg && clear_msg
+
+  ### display all moonraker ips to the user
+  print_op_ip_list; echo
+}
+
+add_reboot_permission(){
+  USER=${USER}
+  #create a backup when file already exists
+  if [ -f /etc/sudoers.d/octoprint-shutdown ]; then
+    sudo mv /etc/sudoers.d/octoprint-shutdown /etc/sudoers.d/octoprint-shutdown.old
+  fi
+  #create new permission file
+  status_msg "Add reboot permission to user '$USER' ..."
+  cd ${HOME} && echo "$USER ALL=NOPASSWD: /sbin/shutdown" > octoprint-shutdown
+  sudo chown 0 octoprint-shutdown
+  sudo mv octoprint-shutdown /etc/sudoers.d/octoprint-shutdown
+  ok_msg "Permission set!"
+}
+
+print_op_ip_list(){
+  i=1
+  for ip in ${op_ip_list[@]}; do
+    echo -e "       ${cyan}● Instance $i:${default} $ip"
+    i=$((i + 1))
+  done
+}

scripts/install_pgc_for_klipper.sh

@@ -0,0 +1,37 @@
+### base variables
+PGC_FOR_KLIPPER_REPO="https://github.com/Kragrathea/pgcode"
+PGC_DIR="${HOME}/pgcode"
+
+install_pgc_for_klipper(){
+  pgconfsrc="$PGC_DIR/pgcode.local.conf"
+  pgconf="/etc/nginx/sites-available/pgcode.local.conf"
+  pgconfsl="/etc/nginx/sites-enabled/pgcode.local.conf"
+  pgc_default_port="7136"
+
+  status_msg "Installing PrettyGCode for Klipper ..."
+  ### let the user decide which port is used
+  echo -e "${cyan}\n###### On which port should PrettyGCode run? (Default: $pgc_default_port)${default} "
+  read -e -p "${cyan}###### Port:${default} " -i "$pgc_default_port" pgc_custom_port
+  ### check nginx dependency
+  dep=(nginx)
+  dependency_check
+  ### clone repo
+  [ -d $PGC_DIR ] && rm -rf $PGC_DIR
+  cd ${HOME} && git clone $PGC_FOR_KLIPPER_REPO
+  ### copy nginx config into destination directory
+  sudo cp $pgconfsrc $pgconf
+  ### replace default pi user in case the user is called different
+  sudo sed -i "s|/home/pi/pgcode;|/home/${USER}/pgcode;|" $pgconf
+  ### replace default port
+  if [ $pgc_custom_port != $pgc_default_port ]; then
+    sudo sed -i "s|listen $pgc_default_port;|listen $pgc_custom_port;|" $pgconf
+    sudo sed -i "s|listen \[::\]:$pgc_default_port;|listen \[::\]:$pgc_custom_port;|" $pgconf
+  fi
+  ### create symlink
+  [ ! -L $pgconfsl ] && sudo ln -s $pgconf $pgconfsl
+  sudo systemctl restart nginx
+  ### show URI
+  pgc_uri="http://$(hostname -I | cut -d" " -f1):$pgc_custom_port"
+  echo -e "${cyan}\n● Accessible via:${default} $pgc_uri"
+  ok_msg "PrettyGCode for Klipper installed!\n"
+}

scripts/ms_theme_installer.sh

@@ -0,0 +1,114 @@
+### base variables
+SYSTEMDDIR="/etc/systemd/system"
+
+get_theme_list(){
+  theme_csv_url="https://raw.githubusercontent.com/mainsail-crew/docs/master/_data/themes.csv"
+  theme_csv=$(curl -s -L $theme_csv_url)
+  unset t_name
+  unset t_note
+  unset t_auth
+  unset t_url
+  i=0
+  while IFS="," read -r col1 col2 col3 col4; do
+    t_name+=("$col1")
+    t_note+=("$col2")
+    t_auth+=("$col3")
+    t_url+=("$col4")
+    if [ ! "$col1" == "name" ]; then
+      printf "|  $i) %-50s|\n" "[$col1]"
+    fi
+    i=$((i+1))
+  done <<< "$theme_csv"
+}
+
+ms_theme_ui(){
+  top_border
+  echo -e "|     ${red}~~~~~~~~ [ Mainsail Theme Installer ] ~~~~~~~${default}     | "
+  hr
+  echo -e "|  ${green}A preview of each Mainsail theme can be found here:${default}  | "
+  echo -e "|  https://docs.mainsail.xyz/theming/themes             | "
+  blank_line
+  echo -e "|  ${yellow}Important note:${default}                                      | "
+  echo -e "|  Installing a theme from this menu will overwrite an  | "
+  echo -e "|  already installed theme or modified custom.css file! | "
+  hr
+  get_theme_list # dynamically generate the themelist from a csv file
+  echo -e "|                                                       | "
+  echo -e "|  R) [Remove Theme]                                    | "
+  back_footer
+}
+
+ms_theme_menu(){
+  ms_theme_ui
+  while true; do
+    read -p "${cyan}Install theme:${default} " a; echo
+    if [ "$a" = "b" ] || [ "$a" = "B" ]; then
+      clear && advanced_menu && break
+    elif [ "$a" = "r" ] || [ "$a" = "R" ]; then
+      ms_theme_delete
+      ms_theme_menu
+    elif [ "$a" -le ${#t_url[@]} ]; then
+      ms_theme_install "${t_auth[$a]}" "${t_url[$a]}" "${t_name[$a]}" "${t_note[$a]}"
+      ms_theme_menu
+    else
+      clear && print_header
+      ERROR_MSG="Invalid command!" && print_msg && clear_msg
+      ms_theme_menu
+    fi
+  done
+  ms_theme_menu
+}
+
+check_select_printer(){
+  unset printer_num
+
+  ### get klipper cfg loc and set default .theme folder loc
+  check_klipper_cfg_path
+  THEME_PATH="$klipper_cfg_loc"
+
+  ### check if there is more than one moonraker instance and if yes
+  ### ask the user to select the printer he wants to install/remove the theme
+  MR_SERVICE_COUNT=$(find "$SYSTEMDDIR" -regextype posix-extended -regex "$SYSTEMDDIR/moonraker(-[^0])?[0-9]*.service" | wc -l)
+  if [[ $MR_SERVICE_COUNT -gt 1 ]]; then
+    top_border
+    echo -e "|  More than one printer was found on this system!      | "
+    echo -e "|  Please select the printer to which you want to       | "
+    echo -e "|  apply the previously selected action.                | "
+    bottom_border
+    read -p "${cyan}Select printer:${default} " printer_num
+
+    ### rewrite the .theme path matching the selected printer
+    THEME_PATH="$klipper_cfg_loc/printer_$printer_num"
+  fi
+
+  ### create the cfg folder if there is none yet
+  [ ! -d "$THEME_PATH" ] && mkdir -p "$THEME_PATH"
+}
+
+ms_theme_install(){
+  THEME_URL="https://github.com/$1/$2"
+
+  ### check and select printer if there is more than 1
+  check_select_printer
+
+  ### download all files
+  status_msg "Installing $3 ..."
+  status_msg "Please wait ..."
+
+  [ -d "$THEME_PATH/.theme" ] && rm -rf "$THEME_PATH/.theme"
+  cd "$THEME_PATH" && git clone "$THEME_URL" ".theme"
+
+  ok_msg "Theme installation complete!"
+  [ -n "$4" ] && echo "${yellow}###### Theme Info: $4${default}"
+  ok_msg "Please remember to delete your browser cache!\n"
+}
+
+ms_theme_delete(){
+  check_select_printer
+  if [ -d "$THEME_PATH/.theme" ]; then
+    status_msg "Removing Theme ..."
+    rm -rf "$THEME_PATH/.theme" && ok_msg "Theme removed!\n"
+  else
+    status_msg "No Theme installed!\n"
+  fi
+}

scripts/network_functions.sh

@@ -0,0 +1,172 @@
+set_nginx_cfg(){
+  if [ "$SET_NGINX_CFG" = "true" ]; then
+    #check for dependencies
+    dep=(nginx)
+    dependency_check
+    #execute operations
+    status_msg "Creating Nginx configuration for $1 ..."
+    #copy content from resources to the respective nginx config file
+    cat ${SRCDIR}/kiauh/resources/klipper_webui_nginx.cfg > ${SRCDIR}/kiauh/resources/$1
+    ##edit the nginx config file before moving it
+    sed -i "s/<<UI>>/$1/g" ${SRCDIR}/kiauh/resources/$1
+    if [ "$SET_LISTEN_PORT" != "$DEFAULT_PORT" ]; then
+      status_msg "Configuring port for $1 ..."
+      #set listen port ipv4
+      sed -i "s/listen\s[0-9]*;/listen $SET_LISTEN_PORT;/" ${SRCDIR}/kiauh/resources/$1
+      #set listen port ipv6
+      sed -i "s/listen\s\[\:*\]\:[0-9]*;/listen \[::\]\:$SET_LISTEN_PORT;/" ${SRCDIR}/kiauh/resources/$1
+    fi
+    #set correct user
+    if [ "$1" = "mainsail" ] || [ "$1" = "fluidd" ]; then
+      sudo sed -i "/root/s/pi/${USER}/" ${SRCDIR}/kiauh/resources/$1
+    fi
+    #moving the config file into correct directory
+    sudo mv ${SRCDIR}/kiauh/resources/$1 /etc/nginx/sites-available/$1
+    ok_msg "Nginx configuration for $1 was set!"
+    if [ "$SET_LISTEN_PORT" != "" ]; then
+      ok_msg "$1 listening on port $SET_LISTEN_PORT!"
+    else
+      ok_msg "$1 listening on default port $DEFAULT_PORT!"
+    fi
+    #remove nginx default config
+    [ -e /etc/nginx/sites-enabled/default ] && sudo rm /etc/nginx/sites-enabled/default
+    #create symlink for own sites
+    [ ! -e /etc/nginx/sites-enabled/$1 ] && sudo ln -s /etc/nginx/sites-available/$1 /etc/nginx/sites-enabled/
+    restart_nginx
+  fi
+}
+
+read_listen_port(){
+  LISTEN_PORT=$(grep listen /etc/nginx/sites-enabled/$1 | head -1 | sed 's/^\s*//' | cut -d" " -f2 | cut -d";" -f1)
+}
+
+detect_enabled_sites(){
+  #check if there is another UI config already installed
+  #and reads the port they are listening on
+  if [ -e /etc/nginx/sites-enabled/mainsail ]; then
+    SITE_ENABLED="true" && MAINSAIL_ENABLED="true"
+    read_listen_port "mainsail"
+    MAINSAIL_PORT=$LISTEN_PORT
+    #echo "debug: Mainsail listens on port: $MAINSAIL_PORT"
+  else
+    MAINSAIL_ENABLED="false"
+  fi
+  if [ -e /etc/nginx/sites-enabled/fluidd ]; then
+    SITE_ENABLED="true" && FLUIDD_ENABLED="true"
+    read_listen_port "fluidd"
+    FLUIDD_PORT=$LISTEN_PORT
+    #echo "debug: Fluidd listens on port: $FLUIDD_PORT"
+  else
+    FLUIDD_ENABLED="false"
+  fi
+  if [ -e /etc/nginx/sites-enabled/dwc2 ]; then
+    SITE_ENABLED="true" && DWC2_ENABLED="true"
+    read_listen_port "dwc2"
+    DWC2_PORT=$LISTEN_PORT
+    #echo "debug: DWC2 listens on port: $DWC2_PORT"
+  else
+    DWC2_ENABLED="false"
+  fi
+  if [ -e /etc/nginx/sites-enabled/octoprint ]; then
+    SITE_ENABLED="true" && OCTOPRINT_ENABLED="true"
+    read_listen_port "octoprint"
+    OCTOPRINT_PORT=$LISTEN_PORT
+    #echo "debug: OctoPrint listens on port: $OCTOPRINT_PORT"
+  else
+    OCTOPRINT_ENABLED="false"
+  fi
+}
+
+create_custom_hostname(){
+  echo
+  top_border
+  echo -e "|  You can change the hostname of this machine to use   |"
+  echo -e "|  that name to open the Interface in your browser.     |"
+  echo -e "|                                                       |"
+  echo -e "|  E.g.: If you set the hostname to 'my-printer' you    |"
+  echo -e "|        can open DWC2/Mainsail/Fluidd/Octoprint by     |"
+  echo -e "|        browsing to: http://my-printer.local           |"
+  bottom_border
+  while true; do
+    read -p "${cyan}###### Do you want to change the hostname? (y/N):${default} " yn
+    case "$yn" in
+      Y|y|Yes|yes)
+        user_input_hostname
+        break;;
+      N|n|No|no|"") break;;
+      *)
+        print_unkown_cmd
+        print_msg && clear_msg;;
+    esac
+  done
+}
+
+user_input_hostname(){
+    unset NEW_HOSTNAME
+    unset HOSTNAME_VALID
+    unset HOSTENAME_CONFIRM
+    echo
+    top_border
+    echo -e "|  ${green}Allowed characters: a-z, 0-9 and single '-'${default}          |"
+    echo -e "|  ${red}No special characters allowed!${default}                       |"
+    echo -e "|  ${red}No leading or trailing '-' allowed!${default}                  |"
+    bottom_border
+    while true; do
+      read -p "${cyan}###### Please set the new hostname:${default} " NEW_HOSTNAME
+      if [[ $NEW_HOSTNAME =~ ^[^\-\_]+([0-9a-z]\-{0,1})+[^\-\_]+$ ]]; then
+        ok_msg "'$NEW_HOSTNAME' is a valid hostname!"
+        HOSTNAME_VALID="true"
+        while true; do
+          echo
+          read -p "${cyan}###### Do you want '$NEW_HOSTNAME' to be the new hostname? (Y/n):${default} " yn
+          case "$yn" in
+            Y|y|Yes|yes|"")
+              echo -e "###### > Yes"
+              HOSTENAME_CONFIRM="true"
+              break;;
+            N|n|No|no)
+              echo -e "###### > No"
+              echo -e "${red}Skip hostname change ...${default}"
+              HOSTENAME_CONFIRM="false"
+              break;;
+            *)
+              print_unkown_cmd
+              print_msg && clear_msg;;
+          esac
+        done
+      break
+      else
+        warn_msg "'$NEW_HOSTNAME' is not a valid hostname!"
+      fi
+    done
+}
+
+set_hostname(){
+  if [ "$HOSTNAME_VALID" = "true" ] && [ "$HOSTENAME_CONFIRM" = "true" ]; then
+    #check for dependencies
+    dep=(avahi-daemon)
+    dependency_check
+    #execute operations
+    #get current hostname and write to variable
+    HOSTNAME=$(hostname)
+    #create host file if missing or create backup of existing one with current date&time
+    if [ -f /etc/hosts ]; then
+      status_msg "Creating backup of hosts file ..."
+      get_date
+      sudo cp /etc/hosts /etc/hosts."$current_date".bak
+      ok_msg "Backup done!"
+      ok_msg "File:'/etc/hosts."$current_date".bak'"
+    else
+      sudo touch /etc/hosts
+    fi
+    #set hostname in /etc/hostname
+    status_msg "Setting hostname to '$NEW_HOSTNAME' ..."
+    status_msg "Please wait ..."
+    sudo hostnamectl set-hostname "$NEW_HOSTNAME"
+    #write new hostname to /etc/hosts
+    status_msg "Writing new hostname to /etc/hosts ..."
+    echo "127.0.0.1       $NEW_HOSTNAME" | sudo tee -a /etc/hosts &>/dev/null
+    ok_msg "New hostname successfully configured!"
+    ok_msg "Remember to reboot for the changes to take effect!"
+  fi
+}

scripts/remove.sh

@@ -1,145 +1,510 @@
+### base variables
+SYSTEMDDIR="/etc/systemd/system"
+
 remove_klipper(){
-  data_arr=(
-  /etc/init.d/klipper
-  /etc/default/klipper
-  $KLIPPER_DIR
-  $KLIPPY_ENV_DIR
-  ${HOME}/klippy.log
-  )
-  print_error "Klipper" && data_count=()
-  if [ "$ERROR_MSG" = "" ]; then
-    stop_klipper
-    if [[ -e /etc/init.d/klipper || -e /etc/default/klipper ]]; then
-      status_msg "Removing klipper service ..."
-      sudo update-rc.d -f klipper remove
-      sudo rm -rf /etc/init.d/klipper /etc/default/klipper && ok_msg "Klipper service removed!"
-    fi
-    if [[ -d $KLIPPER_DIR || -d $KLIPPY_ENV_DIR ]]; then
-      status_msg "Removing klipper and klippy-env diretory ..."
-      rm -rf $KLIPPER_DIR $KLIPPY_ENV_DIR && ok_msg "Directories removed!"
-    fi
-    if [[ -L ${HOME}/klippy.log || -e /tmp/klippy.log ]]; then
-      status_msg "Removing klippy.log symlink ..."
-      rm -rf ${HOME}/klippy.log /tmp/klippy.log && ok_msg "Symlink removed!"
-    fi
-    ok_msg "Klipper successfully removed!"
-  fi
-}
-
-remove_dwc2(){
-  data_arr=(
-  $DWC2FK_DIR
-  $TORNADO_DIR1
-  $TORNADO_DIR2
-  $WEB_DWC2
-  $DWC2_DIR
-  )
-  print_error "DWC2-for-Klipper &\n DWC2 Web UI" && data_count=()
-  if [ "$ERROR_MSG" = "" ]; then
-    if [ -d $DWC2FK_DIR ]; then
-      status_msg "Removing dwc2-for-klipper directory ..."
-      rm -rf $DWC2FK_DIR && ok_msg "Directory removed!"
-    fi
-    if [ -d $TORNADO_DIR1 ]; then
-      status_msg "Removing tornado from klippy-env ..."
-      rm -rf $TORNADO_DIR1 $TORNADO_DIR2 && ok_msg "Tornado removed!"
-    fi
-    if [ -e $WEB_DWC2 ]; then
-      status_msg "Removing web_dwc2.py symlink from klippy ..."
-      rm -rf $WEB_DWC2 && ok_msg "File removed!"
-    fi
-    if [ -d $DWC2_DIR ]; then
-      status_msg "Removing dwc2 directory ..."
-      rm -rf $DWC2_DIR && ok_msg "Directory removed!"
-    fi
-    ok_msg "DWC2-for-Klipper & DWC2 Web UI successfully removed!"
-  fi
-}
-
-remove_mainsail(){
-  data_arr=(
-  $MAINSAIL_SERVICE1
-  $MAINSAIL_SERVICE2
-  $MAINSAIL_DIR
-  ${HOME}/moonraker.log
-  ${HOME}/.klippy_api_key
-  ${HOME}/.moonraker_api_key
-  ${HOME}/moonraker-env
-  /etc/nginx/sites-available/mainsail
-  /etc/nginx/sites-enabled/mainsail
-  /etc/init.d/nginx
-  /etc/default/nginx
-  )
-  print_error "Mainsail" && data_count=()
-  if [ "$ERROR_MSG" = "" ]; then
-    stop_moonraker
-    #remove moonraker services
-    if [[ -e /etc/init.d/moonraker || -e /etc/default/moonraker ]]; then
-      status_msg "Removing moonraker service ..."
-      sudo update-rc.d -f moonraker remove
-      sudo rm -rf /etc/init.d/moonraker /etc/default/moonraker && ok_msg "Moonraker service removed!"
-    fi
-    #remove mainsail dir
-    if [ -d $MAINSAIL_DIR ]; then
-      status_msg "Removing mainsail directory ..."
-      rm -rf $MAINSAIL_DIR && ok_msg "Directory removed!"
-    fi
-    #remove moonraker-env
-    if [ -d ${HOME}/moonraker-env ]; then
-      status_msg "Removing moonraker virtualenv ..."
-      rm -rf ${HOME}/moonraker-env && ok_msg "Directory removed!"
-    fi
-    #remove moonraker.log symlink
-    if [[ -L ${HOME}/moonraker.log || -e /tmp/moonraker.log ]]; then
-      status_msg "Removing moonraker.log symlink ..."
-      rm -rf ${HOME}/moonraker.log /tmp/moonraker.log && ok_msg "Symlink removed!"
-    fi
-    #remove mainsail cfg
-    if [ -e /etc/nginx/sites-available/mainsail ]; then
-      status_msg "Removing mainsail configuration for nginx ..."
-      sudo rm /etc/nginx/sites-available/mainsail && ok_msg "File removed!"
-    fi
-    #remove mainsail symlink
-    if [ -L /etc/nginx/sites-enabled/mainsail ]; then
-      status_msg "Removing mainsail symlink for nginx ..."
-      sudo rm /etc/nginx/sites-enabled/mainsail && ok_msg "File removed!"
-    fi
-    #remove legacy api key
-    if [ -e ${HOME}/.klippy_api_key ]; then
-      status_msg "Removing legacy API Key ..."
-      rm ${HOME}/.klippy_api_key && ok_msg "Done!"
-    fi
-    #remove api key
-    if [ -e ${HOME}/.moonraker_api_key ]; then
-      status_msg "Removing API Key ..."
-      rm ${HOME}/.moonraker_api_key && ok_msg "Done!"
-    fi
-    remove_nginx
-    ok_msg "Mainsail successfully removed!"
-  fi
-}
-
-remove_nginx(){
-  #ask for complete removal of nginx if installed
-  if [[ $(dpkg-query -f'${Status}' --show nginx 2>/dev/null) = *\ installed ]]  ; then
+  shopt -s extglob # enable extended globbing
+  ### ask the user if he wants to uninstall moonraker too.
+  ###? currently usefull if the user wants to switch from single-instance to multi-instance
+  FILE="$SYSTEMDDIR/moonraker?(-*([0-9])).service"
+  if ls $FILE 2>/dev/null 1>&2; then
     while true; do
-      echo
-      read -p "Do you want to completely remove (purge) nginx? (Y/n): " yn
+      unset REM_MR
+      top_border
+      echo -e "| Do you want to remove Moonraker afterwards?           |"
+      echo -e "|                                                       |"
+      echo -e "| This is useful in case you want to switch from a      |"
+      echo -e "| single-instance to a multi-instance installation,     |"
+      echo -e "| which makes a re-installation of Moonraker necessary. |"
+      echo -e "|                                                       |"
+      echo -e "| If for any other reason you only want to uninstall    |"
+      echo -e "| Klipper, please select 'No' and continue.             |"
+      bottom_border
+      read -p "${cyan}###### Remove Moonraker afterwards? (y/N):${default} " yn
       case "$yn" in
-        Y|y|Yes|yes|"")
-        status_msg "Stopping and removing nginx service ..."
-        if [ -e /etc/init.d/nginx ]; then
-          sudo /etc/init.d/nginx stop && ok_msg "Nginx service stopped!"
-          sudo rm /etc/init.d/nginx && ok_msg "Nginx service removed!"
-        fi
-        if [ -e /etc/default/nginx ]; then
-          sudo rm /etc/default/nginx
-        fi
-        status_msg "Purging nginx from system ..."
-        sudo apt-get purge nginx nginx-common -y && ok_msg "Nginx removed!"
-        break;;
-        N|n|No|no) break;;
-      esac
+        Y|y|Yes|yes)
+          echo -e "###### > Yes"
+          REM_MR="true"
+          break;;
+        N|n|No|no|"")
+          echo -e "###### > No"
+          REM_MR="false"
+          break;;
+        *)
+          print_unkown_cmd
+          print_msg && clear_msg;;
+    esac
     done
   fi
-}
+
+  ### remove "legacy" klipper init.d service
+  if [ -e /etc/init.d/klipper ]; then
+    status_msg "Removing Klipper Service ..."
+    sudo systemctl stop klipper
+    sudo update-rc.d -f klipper remove
+    sudo rm -f /etc/init.d/klipper
+    sudo rm -f /etc/default/klipper
+    ok_msg "Klipper Service removed!"
+  fi
+
+  ### remove all klipper services
+  FILE="$SYSTEMDDIR/klipper?(-*([0-9])).service"
+  if ls $FILE 2>/dev/null 1>&2; then
+    status_msg "Removing Klipper Services ..."
+    for service in $(ls $FILE | cut -d"/" -f5)
+    do
+      status_msg "Removing $service ..."
+      sudo systemctl stop $service
+      sudo systemctl disable $service
+      sudo rm -f $SYSTEMDDIR/$service
+      ok_msg "Done!"
+    done
+    ### reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
+    ok_msg "Klipper Service removed!"
+  fi
+
+  ### remove all logfiles
+  FILE="${HOME}/klipper_logs/klippy?(-*([0-9])).log"
+  if ls $FILE 2>/dev/null 1>&2; then
+    for log in $(ls $FILE); do
+      status_msg "Removing $log ..."
+      rm -f $log
+      ok_msg "$log removed!"
+    done
+  fi
+
+  ### remove all UDS
+  FILE="/tmp/klippy_uds?(-*([0-9]))"
+  if ls $FILE 2>/dev/null 1>&2; then
+    for uds in $(ls $FILE); do
+      status_msg "Removing $uds ..."
+      rm -f $uds
+      ok_msg "$uds removed!"
+    done
+  fi
+
+  ### remove all tmp-printer
+  FILE="/tmp/printer?(-*([0-9]))"
+  if ls $FILE 2>/dev/null 1>&2; then
+    for tmp_printer in $(ls $FILE); do
+      status_msg "Removing $tmp_printer ..."
+      rm -f $tmp_printer
+      ok_msg "$tmp_printer removed!"
+    done
+  fi
+
+  ### removing klipper and klippy-env folders
+  if [ -d $KLIPPER_DIR ]; then
+    status_msg "Removing Klipper directory ..."
+    rm -rf $KLIPPER_DIR && ok_msg "Directory removed!"
+  fi
+  if [ -d $KLIPPY_ENV ]; then
+    status_msg "Removing klippy-env directory ..."
+    rm -rf $KLIPPY_ENV && ok_msg "Directory removed!"
+  fi
+
+  CONFIRM_MSG=" Klipper was successfully removed!" && print_msg && clear_msg
+  shopt -u extglob # enable extended globbing
+
+  if [ "$REM_MR" == "true" ]; then
+    remove_moonraker && unset REM_MR
+  fi
+}
+
+#############################################################
+#############################################################
+
+remove_moonraker(){
+  shopt -s extglob # enable extended globbing
+  ### remove "legacy" moonraker init.d service
+  if [ -f /etc/init.d/moonraker ]; then
+    status_msg "Removing Moonraker Service ..."
+    sudo systemctl stop moonraker
+    sudo update-rc.d -f moonraker remove
+    sudo rm -f /etc/init.d/moonraker
+    sudo rm -f /etc/default/moonraker
+    ok_msg "Moonraker Service removed!"
+  fi
+
+  ### remove all moonraker services
+  FILE="$SYSTEMDDIR/moonraker?(-*([0-9])).service"
+  if ls $FILE 2>/dev/null 1>&2; then
+    status_msg "Removing Moonraker Services ..."
+    for service in $(ls $FILE | cut -d"/" -f5)
+    do
+      status_msg "Removing $service ..."
+      sudo systemctl stop $service
+      sudo systemctl disable $service
+      sudo rm -f $SYSTEMDDIR/$service
+      ok_msg "Done!"
+    done
+    ### reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
+    ok_msg "Moonraker Service removed!"
+  fi
+
+  ### remove all logfiles
+  FILE="${HOME}/klipper_logs/moonraker?(-*([0-9])).log"
+  if ls $FILE 2>/dev/null 1>&2; then
+    for log in $(ls $FILE); do
+      status_msg "Removing $log ..."
+      rm -f $log
+      ok_msg "$log removed!"
+    done
+  fi
+
+  ### remove moonraker nginx config
+  if [[ -e $NGINX_CONFD/upstreams.conf || -e $NGINX_CONFD/common_vars.conf ]]; then
+    status_msg "Removing Moonraker NGINX configuration ..."
+    sudo rm -f $NGINX_CONFD/upstreams.conf $NGINX_CONFD/common_vars.conf && ok_msg "Moonraker NGINX configuration removed!"
+  fi
+
+  ### remove legacy api key
+  if [ -e ${HOME}/.klippy_api_key ]; then
+    status_msg "Removing legacy API Key ..." && rm ${HOME}/.klippy_api_key && ok_msg "Done!"
+  fi
+
+  ### remove api key
+  if [ -e ${HOME}/.moonraker_api_key ]; then
+    status_msg "Removing API Key ..." && rm ${HOME}/.moonraker_api_key && ok_msg "Done!"
+  fi
+
+  ### removing moonraker and moonraker-env folder
+  if [ -d $MOONRAKER_DIR ]; then
+    status_msg "Removing Moonraker directory ..."
+    rm -rf $MOONRAKER_DIR && ok_msg "Directory removed!"
+  fi
+  if [ -d $MOONRAKER_ENV ]; then
+    status_msg "Removing moonraker-env directory ..."
+    rm -rf $MOONRAKER_ENV && ok_msg "Directory removed!"
+  fi
+
+  CONFIRM_MSG=" Moonraker was successfully removed!"
+  shopt -u extglob # disable extended globbing
+}
+
+#############################################################
+#############################################################
+
+remove_dwc2(){
+  ### remove "legacy" init.d service
+  if [ -e /etc/init.d/dwc ]; then
+    status_msg "Removing DWC2-for-Klipper-Socket Service ..."
+    sudo systemctl stop dwc
+    sudo update-rc.d -f dwc remove
+    sudo rm -f /etc/init.d/dwc
+    sudo rm -f /etc/default/dwc
+    ok_msg "DWC2-for-Klipper-Socket Service removed!"
+  fi
+
+  ### remove all dwc services
+  if ls /etc/systemd/system/dwc*.service 2>/dev/null 1>&2; then
+    status_msg "Removing DWC2-for-Klipper-Socket Services ..."
+    for service in $(ls /etc/systemd/system/dwc*.service | cut -d"/" -f5)
+    do
+      status_msg "Removing $service ..."
+      sudo systemctl stop $service
+      sudo systemctl disable $service
+      sudo rm -f $SYSTEMDDIR/$service
+      ok_msg "Done!"
+    done
+    ### reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
+    ok_msg "DWC2-for-Klipper-Socket Service removed!"
+  fi
+
+  ### remove all logfiles
+  if ls /tmp/dwc*.log 2>/dev/null 1>&2; then
+    for logfile in $(ls /tmp/dwc*.log)
+    do
+      status_msg "Removing $logfile ..."
+      rm -f $logfile
+      ok_msg "File '$logfile' removed!"
+    done
+  fi
+
+  ### removing the rest of the folders
+  if [ -d $DWC2FK_DIR ]; then
+    status_msg "Removing DWC2-for-Klipper-Socket directory ..."
+    rm -rf $DWC2FK_DIR && ok_msg "Directory removed!"
+  fi
+  if [ -d $DWC_ENV_DIR ]; then
+    status_msg "Removing DWC2-for-Klipper-Socket virtualenv ..."
+    rm -rf $DWC_ENV_DIR && ok_msg "Directory removed!"
+  fi
+  if [ -d $DWC2_DIR ]; then
+    status_msg "Removing DWC2 directory ..."
+    rm -rf $DWC2_DIR && ok_msg "Directory removed!"
+  fi
+
+  ### remove dwc2_port from ~/.kiauh.ini
+  sed -i "/^dwc2_port=/d" $INI_FILE
+
+  CONFIRM_MSG=" DWC2-for-Klipper-Socket was successfully removed!"
+}
+
+#############################################################
+#############################################################
+
+remove_mainsail(){
+  ### remove mainsail dir
+  if [ -d $MAINSAIL_DIR ]; then
+    status_msg "Removing Mainsail directory ..."
+    rm -rf $MAINSAIL_DIR && ok_msg "Directory removed!"
+  fi
+
+  ### remove mainsail config for nginx
+  if [ -e /etc/nginx/sites-available/mainsail ]; then
+    status_msg "Removing Mainsail configuration for Nginx ..."
+    sudo rm /etc/nginx/sites-available/mainsail && ok_msg "File removed!"
+  fi
+
+  ### remove mainsail symlink for nginx
+  if [ -L /etc/nginx/sites-enabled/mainsail ]; then
+    status_msg "Removing Mainsail Symlink for Nginx ..."
+    sudo rm /etc/nginx/sites-enabled/mainsail && ok_msg "File removed!"
+  fi
+
+  ### remove mainsail nginx logs and log symlinks
+  for log in $(find /var/log/nginx -name "mainsail*"); do
+    sudo rm -f $log
+  done
+  for log in $(find ${HOME}/klipper_logs -name "mainsail*"); do
+    rm -f $log
+  done
+
+  ### remove mainsail_port from ~/.kiauh.ini
+  sed -i "/^mainsail_port=/d" $INI_FILE
+
+  CONFIRM_MSG="Mainsail successfully removed!"
+}
+
+remove_fluidd(){
+  ### remove fluidd dir
+  if [ -d $FLUIDD_DIR ]; then
+    status_msg "Removing Fluidd directory ..."
+    rm -rf $FLUIDD_DIR && ok_msg "Directory removed!"
+  fi
+
+  ### remove fluidd config for nginx
+  if [ -e /etc/nginx/sites-available/fluidd ]; then
+    status_msg "Removing Fluidd configuration for Nginx ..."
+    sudo rm /etc/nginx/sites-available/fluidd && ok_msg "File removed!"
+  fi
+
+  ### remove fluidd symlink for nginx
+  if [ -L /etc/nginx/sites-enabled/fluidd ]; then
+    status_msg "Removing Fluidd Symlink for Nginx ..."
+    sudo rm /etc/nginx/sites-enabled/fluidd && ok_msg "File removed!"
+  fi
+
+  ### remove mainsail nginx logs and log symlinks
+  for log in $(find /var/log/nginx -name "fluidd*"); do
+    sudo rm -f $log
+  done
+  for log in $(find ${HOME}/klipper_logs -name "fluidd*"); do
+    rm -f $log
+  done
+
+  ### remove fluidd_port from ~/.kiauh.ini
+  sed -i "/^fluidd_port=/d" $INI_FILE
+
+  CONFIRM_MSG="Fluidd successfully removed!"
+}
+
+#############################################################
+#############################################################
+
+remove_octoprint(){
+  ###remove all octoprint services
+  if ls /etc/systemd/system/octoprint*.service 2>/dev/null 1>&2; then
+    status_msg "Removing OctoPrint Services ..."
+    for service in $(ls /etc/systemd/system/octoprint*.service | cut -d"/" -f5)
+    do
+      status_msg "Removing $service ..."
+      sudo systemctl stop $service
+      sudo systemctl disable $service
+      sudo rm -f $SYSTEMDDIR/$service
+      ok_msg "OctoPrint Service removed!"
+    done
+    ### reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
+  fi
+
+  ### remove sudoers file
+  if [ -f /etc/sudoers.d/octoprint-shutdown ]; then
+    sudo rm -rf /etc/sudoers.d/octoprint-shutdown
+  fi
+
+  ### remove OctoPrint directory
+  if [ -d ${HOME}/OctoPrint ]; then
+    status_msg "Removing OctoPrint directory ..."
+    rm -rf ${HOME}/OctoPrint && ok_msg "Directory removed!"
+  fi
+
+  ###remove .octoprint directories
+  if ls -d ${HOME}/.octoprint* 2>/dev/null 1>&2; then
+    for folder in $(ls -d ${HOME}/.octoprint*)
+    do
+      status_msg "Removing $folder ..." && rm -rf $folder && ok_msg "Done!"
+    done
+  fi
+
+  ### remove octoprint_port from ~/.kiauh.ini
+  sed -i "/^octoprint_port=/d" $INI_FILE
+
+  CONFIRM_MSG=" OctoPrint successfully removed!"
+}
+
+#############################################################
+#############################################################
+
+remove_nginx(){
+  if ls /lib/systemd/system/nginx.service 2>/dev/null 1>&2; then
+    status_msg "Stopping Nginx service ..."
+    sudo systemctl stop nginx && sudo systemctl disable nginx
+    ok_msg "Service stopped and disabled!"
+    status_msg "Purging Nginx from system ..."
+    sudo apt-get purge nginx nginx-common -y
+    sudo update-rc.d -f nginx remove
+    CONFIRM_MSG=" Nginx successfully removed!"
+  else
+    ERROR_MSG=" Looks like Nginx was already removed!\n Skipping..."
+  fi
+}
+
+remove_klipperscreen(){
+  source_kiauh_ini
+
+  ### remove KlipperScreen dir
+  if [ -d $KLIPPERSCREEN_DIR ]; then
+    status_msg "Removing KlipperScreen directory ..."
+    rm -rf $KLIPPERSCREEN_DIR && ok_msg "Directory removed!"
+  fi
+
+  ### remove KlipperScreen VENV dir
+  if [ -d $KLIPPERSCREEN_ENV_DIR ]; then
+    status_msg "Removing KlipperScreen VENV directory ..."
+    rm -rf $KLIPPERSCREEN_ENV_DIR && ok_msg "Directory removed!"
+  fi
+
+  ### remove KlipperScreen service
+  if [ -e /etc/systemd/system/KlipperScreen.service ]; then
+    status_msg "Removing KlipperScreen service ..."
+    sudo systemctl stop KlipperScreen
+    sudo systemctl disable KlipperScreen
+    sudo rm -f $SYSTEMDDIR/KlipperScreen.service
+    ###reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
+    ok_msg "KlipperScreen Service removed!"
+  fi
+
+  ### remove KlipperScreen log
+  if [ -e /tmp/KlipperScreen.log ]; then
+    status_msg "Removing KlipperScreen log file ..."
+    rm -f /tmp/KlipperScreen.log && ok_msg "File removed!"
+  fi
+
+  ### remove KlipperScreen log symlink in config dir
+
+  if [ -e $klipper_cfg_loc/KlipperScreen.log ]; then
+    status_msg "Removing KlipperScreen log symlink ..."
+    rm -f $klipper_cfg_loc/KlipperScreen.log && ok_msg "File removed!"
+  fi
+
+  CONFIRM_MSG="KlipperScreen successfully removed!"
+}
+
+remove_MoonrakerTelegramBot(){
+  source_kiauh_ini
+
+  ### remove MoonrakerTelegramBot dir
+  if [ -d $MOONRAKER_TELEGRAM_BOT_DIR ]; then
+    status_msg "Removing MoonrakerTelegramBot directory ..."
+    rm -rf $MOONRAKER_TELEGRAM_BOT_DIR && ok_msg "Directory removed!"
+  fi
+
+  ### remove MoonrakerTelegramBot VENV dir
+  if [ -d $MOONRAKER_TELEGRAM_BOT_ENV_DIR ]; then
+    status_msg "Removing MoonrakerTelegramBot VENV directory ..."
+    rm -rf $MOONRAKER_TELEGRAM_BOT_ENV_DIR && ok_msg "Directory removed!"
+  fi
+
+  ### remove MoonrakerTelegramBot service
+  if [ -e /etc/systemd/system/moonraker-telegram-bot.service ]; then
+    status_msg "Removing MoonrakerTelegramBot service ..."
+    sudo systemctl stop moonraker-telegram-bot
+    sudo systemctl disable moonraker-telegram-bot
+    sudo rm -f $SYSTEMDDIR/moonraker-telegram-bot.service
+    ###reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
+    ok_msg "MoonrakerTelegramBot Service removed!"
+  fi
+
+  ### remove MoonrakerTelegramBot log
+  if [ -e /tmp/telegram.log ] || [ -e ${HOME}/klipper_logs/telegram.log ]; then
+    status_msg "Removing MoonrakerTelegramBot log file ..."
+    rm -f "/tmp/telegram.log" "${HOME}/klipper_logs/telegram.log"  && ok_msg "File removed!"
+  fi
+
+  ### remove MoonrakerTelegramBot log symlink in config dir
+
+  if [ -e $klipper_cfg_loc/telegram.log ]; then
+    status_msg "Removing MoonrakerTelegramBot log symlink ..."
+    rm -f $klipper_cfg_loc/telegram.log && ok_msg "File removed!"
+  fi
+
+  CONFIRM_MSG="MoonrakerTelegramBot successfully removed!"
+}
+
+remove_mjpg-streamer(){
+  ### remove MJPG-Streamer service
+  if [ -e $SYSTEMDDIR/webcamd.service ]; then
+    status_msg "Removing MJPG-Streamer service ..."
+    sudo systemctl stop webcamd && sudo systemctl disable webcamd
+    sudo rm -f $SYSTEMDDIR/webcamd.service
+    ###reloading units
+    sudo systemctl daemon-reload
+    sudo systemctl reset-failed
+    ok_msg "MJPG-Streamer Service removed!"
+  fi
+
+  ### remove webcamd from /usr/local/bin
+  if [ -e "/usr/local/bin/webcamd" ]; then
+    sudo rm -f "/usr/local/bin/webcamd"
+  fi
+
+  ### remove MJPG-Streamer directory
+  if [ -d ${HOME}/mjpg-streamer ]; then
+    status_msg "Removing MJPG-Streamer directory ..."
+    rm -rf ${HOME}/mjpg-streamer
+    ok_msg "MJPG-Streamer directory removed!"
+  fi
+
+  ### remove webcamd log and symlink
+  [ -f "/var/log/webcamd.log" ] && sudo rm -f "/var/log/webcamd.log"
+  [ -L "${HOME}/klipper_logs/webcamd.log" ] && rm -f "${HOME}/klipper_logs/webcamd.log"
+
+  CONFIRM_MSG="MJPG-Streamer successfully removed!"
+}
+
+remove_prettygcode(){
+  pgconf="/etc/nginx/sites-available/pgcode.local.conf"
+  pgconfsl="/etc/nginx/sites-enabled/pgcode.local.conf"
+  if [ -d ${HOME}/pgcode ] || [ -f $pgconf ] || [ -L $pgconfsl ]; then
+    status_msg "Removing PrettyGCode for Klipper ..."
+    rm -rf ${HOME}/pgcode
+    sudo rm -f $pgconf
+    sudo rm -f $pgconfsl
+    sudo systemctl restart nginx
+    CONFIRM_MSG="PrettyGCode for Klipper successfully removed!"
+  else
+    ERROR_MSG="PrettyGCode for Klipper not found!\n Skipping..."
+  fi
+}

scripts/rollback.sh

@@ -0,0 +1,111 @@
+save_klipper_state(){
+  source_kiauh_ini
+  #read current klipper state
+  cd $KLIPPER_DIR
+  COMMIT_STATE=$(git rev-parse --short HEAD)
+  if [ "$GET_BRANCH" = "master" ]; then
+    ORI_OLD=$previous_origin_state
+    ORI_NEW=$COMMIT_STATE
+    sed -i "/previous_origin_state=/s/$ORI_OLD/$ORI_NEW/" $INI_FILE
+  elif [ "$GET_BRANCH" = "scurve-shaping" ]; then
+    SHA_OLD=$previous_shaping_state
+    SHA_NEW=$COMMIT_STATE
+    sed -i "/previous_shaping_state=/s/$SHA_OLD/$SHA_NEW/" $INI_FILE
+  elif [ "$GET_BRANCH" = "scurve-smoothing" ]; then
+    SMO_OLD=$previous_smoothing_state
+    SMO_NEW=$COMMIT_STATE
+    sed -i "/previous_smoothing_state=/s/$SMO_OLD/$SMO_NEW/" $INI_FILE
+  fi
+}
+
+load_klipper_state(){
+  source_kiauh_ini
+  print_branch
+  cd $KLIPPER_DIR
+  CURRENT_COMMIT=$(git rev-parse --short=8 HEAD)
+  if [ "$GET_BRANCH" = "origin/master" ] || [ "$GET_BRANCH" = "master" ]; then
+    PREVIOUS_COMMIT=$previous_origin_state
+  elif [ "$GET_BRANCH" = "scurve-shaping" ]; then
+    PREVIOUS_COMMIT=$previous_shaping_state
+  elif [ "$GET_BRANCH" = "scurve-smoothing" ]; then
+    PREVIOUS_COMMIT=$previous_smoothing_state
+  fi
+  CURRENT_COMMIT_DATE=$(git show -s --format=%cd --date=short $CURRENT_COMMIT)
+  if [ "$PREVIOUS_COMMIT" != "0" ]; then
+    PREVIOUS_COMMIT_DATE=$(git show -s --format=%cd --date=short $PREVIOUS_COMMIT)
+  fi
+  if [ "$PREVIOUS_COMMIT" = "0" ]; then
+    CURR_UI=$(echo -e "${green}$CURRENT_COMMIT from $CURRENT_COMMIT_DATE${default}")
+    PREV_UI=$(echo -e "${red}None${default}                    ")
+  else
+    if [ "$CURRENT_COMMIT" = "$PREVIOUS_COMMIT" ]; then
+      CURR_UI=$(echo -e "${green}$CURRENT_COMMIT from $CURRENT_COMMIT_DATE${default}")
+      PREV_UI=$(echo -e "${green}$PREVIOUS_COMMIT from $PREVIOUS_COMMIT_DATE${default}")
+    else
+      CURR_UI=$(echo -e "${yellow}$CURRENT_COMMIT from $CURRENT_COMMIT_DATE${default}")
+      PREV_UI=$(echo -e "${yellow}$PREVIOUS_COMMIT from $PREVIOUS_COMMIT_DATE${default}")
+    fi
+  fi
+  rollback_ui
+  rollback_klipper
+}
+
+rollback_ui(){
+  top_border
+  echo -e "|     $(title_msg "~~~~~~~~~~~~~ [ Rollback Menu ] ~~~~~~~~~~~~~")     | "
+  hr
+  echo -e "|  If serious errors occured after updating Klipper,    | "
+  echo -e "|  you can use this menu to return to the previously    | "
+  echo -e "|  used commit from which you have updated.             | "
+  bottom_border
+  top_border
+  echo -e "|  Active branch: ${green}$PRINT_BRANCH${default}                      | "
+  hr
+  echo -e "|  Currently on commit:                                 | "
+  echo -e "|  $CURR_UI                             | "
+  hr
+  echo -e "|  Commit last updated from:                            | "
+  echo -e "|  $PREV_UI                             | "
+  back_footer
+}
+
+rollback_klipper(){
+  if [ "$PREVIOUS_COMMIT" != "0" ] && [ "$CURRENT_COMMIT" != "$PREVIOUS_COMMIT" ]; then
+    while true; do
+        echo -e "${cyan}"
+        read -p "###### Do you want to rollback to $PREVIOUS_COMMIT? (Y/n): " yn
+        echo -e "${default}"
+        case "$yn" in
+          Y|y|Yes|yes|"")
+            clear
+            print_header
+              status_msg "Rolling back to $PREVIOUS_COMMIT ..."
+              git reset --hard $PREVIOUS_COMMIT -q
+              ok_msg "Rollback complete!"; echo
+            load_klipper_state
+            break;;
+          N|n|No|no) clear; advanced_menu; break;;
+          B|b) clear; advanced_menu; break;;
+          *)
+            print_unkown_cmd
+            print_msg && clear_msg;;
+      esac
+    done
+  else
+    while true; do
+      echo -e "${cyan}"
+      read -p "Perform action: " action; echo
+      echo -e "${default}"
+      case "$action" in
+        B|b)
+          clear; advanced_menu; break;;
+        *)
+          clear
+          print_header
+          print_unkown_cmd
+          print_msg && clear_msg
+          rollback_ui;;
+      esac
+    done
+  fi
+}

scripts/status.sh

@@ -1,65 +1,134 @@
+kiauh_status(){
+  if [ -d "${SRCDIR}/kiauh/.git" ]; then
+    cd ${SRCDIR}/kiauh
+    if git branch -a | grep "* master" -q; then
+      git fetch -q
+      if [[ "$(git rev-parse --short=8 origin/master)" != "$(git rev-parse --short=8 HEAD)" ]]; then
+        KIAUH_UPDATE_AVAIL="true"
+      fi
+    fi
+  fi
+}
+
+check_system_updates(){
+  SYS_UPDATE=$(apt list --upgradeable 2>/dev/null | sed "1d")
+  if [ ! -z "$SYS_UPDATE" ]; then
+    # add system updates to the update all array for the update all function in the updater
+    SYS_UPDATE_AVAIL="true" && update_arr+=(update_system)
+    DISPLAY_SYS_UPDATE="${yellow}System upgrade available!${default}"
+  else
+    SYS_UPDATE_AVAIL="false"
+    DISPLAY_SYS_UPDATE="${green}System up to date!       ${default}"
+  fi
+}
+
 klipper_status(){
   kcount=0
   klipper_data=(
+    SERVICE
     $KLIPPER_DIR
     $KLIPPY_ENV_DIR
-    $KLIPPER_SERVICE1
-    $KLIPPER_SERVICE2
   )
-  #count+1 for each found data-item from array
+
+  ### count amount of klipper service files in /etc/systemd/system
+  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "^klipper(\-[[:digit:]]+)?\.service$" | wc -l)
+
+  ### a fix to detect an existing "legacy" klipper init.d installation
+  if [ -f /etc/init.d/klipper ] && [ -f /etc/init.d/klipper ]; then
+    SERVICE_FILE_COUNT=1
+  fi
+
+  ### remove the "SERVICE" entry from the klipper_data array if a klipper service is installed
+  [ $SERVICE_FILE_COUNT -gt 0 ] && unset klipper_data[0]
+
+  ### count+1 for each found data-item from array
   for kd in "${klipper_data[@]}"
   do
     if [ -e $kd ]; then
       kcount=$(expr $kcount + 1)
     fi
   done
+
+  ### display status
   if [ "$kcount" == "${#klipper_data[*]}" ]; then
-    KLIPPER_STATUS="${green}Installed!${default}         "
+    KLIPPER_STATUS="$(printf "${green}Installed: %-5s${default}" $SERVICE_FILE_COUNT)"
   elif [ "$kcount" == 0 ]; then
-    KLIPPER_STATUS="${red}Not installed!${default}     "
+    KLIPPER_STATUS="${red}Not installed!${default}  "
   else
-    KLIPPER_STATUS="${yellow}Incomplete!${default}        "
+    KLIPPER_STATUS="${yellow}Incomplete!${default}     "
   fi
 }
 
 dwc2_status(){
   dcount=0
-  dwc2_data=(
-    $DWC2FK_DIR
-    $WEB_DWC2
+  dwc_data=(
+    SERVICE
     $DWC2_DIR
-    $TORNADO_DIR1
-    $TORNADO_DIR2
+    $DWC2FK_DIR
+    $DWC_ENV_DIR
   )
+
+  ### count amount of dwc service files in /etc/systemd/system
+  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "^dwc(\-[[:digit:]]+)?\.service$" | wc -l)
+
+  ### remove the "SERVICE" entry from the dwc_data array if a dwc service is installed
+  [ $SERVICE_FILE_COUNT -gt 0 ] && unset dwc_data[0]
+
   #count+1 for each found data-item from array
-  for dd in "${dwc2_data[@]}"
+  for dd in "${dwc_data[@]}"
   do
     if [ -e $dd ]; then
       dcount=$(expr $dcount + 1)
     fi
   done
-  if [ "$dcount" == "${#dwc2_data[*]}" ]; then
-    DWC2_STATUS="${green}Installed!${default}         "
+
+  if [ "$dcount" == "${#dwc_data[*]}" ]; then
+    DWC2_STATUS="$(printf "${green}Installed: %-5s${default}" $SERVICE_FILE_COUNT)"
   elif [ "$dcount" == 0 ]; then
-    DWC2_STATUS="${red}Not installed!${default}     "
+    DWC2_STATUS="${red}Not installed!${default}  "
   else
-    DWC2_STATUS="${yellow}Incomplete!${default}        "
+    DWC2_STATUS="${yellow}Incomplete!${default}     "
+  fi
+}
+
+moonraker_status(){
+  mrcount=0
+  moonraker_data=(
+    SERVICE
+    $MOONRAKER_DIR
+    $MOONRAKER_ENV_DIR
+  )
+
+  ### count amount of moonraker service files in /etc/systemd/system
+  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "^moonraker(\-[[:digit:]]+)?\.service$" | wc -l)
+
+  ### remove the "SERVICE" entry from the moonraker_data array if a moonraker service is installed
+  [ $SERVICE_FILE_COUNT -gt 0 ] && unset moonraker_data[0]
+
+  ### count+1 for each found data-item from array
+  for mrd in "${moonraker_data[@]}"
+  do
+    if [ -e $mrd ]; then
+      mrcount=$(expr $mrcount + 1)
+    fi
+  done
+
+  ### display status
+  if [ "$mrcount" == "${#moonraker_data[*]}" ]; then
+    MOONRAKER_STATUS="$(printf "${green}Installed: %-5s${default}" $SERVICE_FILE_COUNT)"
+  elif [ "$mrcount" == 0 ]; then
+    MOONRAKER_STATUS="${red}Not installed!${default}  "
+  else
+    MOONRAKER_STATUS="${yellow}Incomplete!${default}     "
   fi
 }
 
 mainsail_status(){
   mcount=0
   mainsail_data=(
-    $MAINSAIL_SERVICE1
-    $MAINSAIL_SERVICE2
     $MAINSAIL_DIR
-    #${HOME}/.klippy_api_key
-    #${HOME}/.moonraker_api_key
-    #${HOME}/moonraker-env
-    /etc/nginx/sites-available/mainsail
-    /etc/nginx/sites-enabled/mainsail
-    /etc/init.d/nginx
-    /etc/default/nginx
+    $NGINX_SA/mainsail
+    $NGINX_SE/mainsail
   )
   #count+1 for each found data-item from array
   for md in "${mainsail_data[@]}"
@@ -69,158 +138,491 @@ mainsail_status(){
     fi
   done
   if [ "$mcount" == "${#mainsail_data[*]}" ]; then
-    MAINSAIL_STATUS="${green}Installed!${default}         "
+    MAINSAIL_STATUS="${green}Installed!${default}      "
   elif [ "$mcount" == 0 ]; then
-    MAINSAIL_STATUS="${red}Not installed!${default}     "
+    MAINSAIL_STATUS="${red}Not installed!${default}  "
   else
-    MAINSAIL_STATUS="${yellow}Incomplete!${default}        "
+    MAINSAIL_STATUS="${yellow}Incomplete!${default}     "
   fi
 }
 
+fluidd_status(){
+  fcount=0
+  fluidd_data=(
+    $FLUIDD_DIR
+    $NGINX_SA/fluidd
+    $NGINX_SE/fluidd
+  )
+  #count+1 for each found data-item from array
+  for fd in "${fluidd_data[@]}"
+  do
+    if [ -e $fd ]; then
+      fcount=$(expr $fcount + 1)
+    fi
+  done
+  if [ "$fcount" == "${#fluidd_data[*]}" ]; then
+    FLUIDD_STATUS="${green}Installed!${default}      "
+  elif [ "$fcount" == 0 ]; then
+    FLUIDD_STATUS="${red}Not installed!${default}  "
+  else
+    FLUIDD_STATUS="${yellow}Incomplete!${default}     "
+  fi
+}
+
+octoprint_status(){
+  ocount=0
+  octoprint_data=(
+    SERVICE
+    $OCTOPRINT_DIR
+  )
+  ### count amount of octoprint service files in /etc/systemd/system
+  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "^octoprint(\-[[:digit:]]+)?\.service$" | wc -l)
+
+  ### remove the "SERVICE" entry from the octoprint_data array if a octoprint service is installed
+  [ $SERVICE_FILE_COUNT -gt 0 ] && unset octoprint_data[0]
+
+  #count+1 for each found data-item from array
+  for op in "${octoprint_data[@]}"
+  do
+    if [ -e $op ]; then
+      ocount=$(expr $ocount + 1)
+    fi
+  done
+
+  ### display status
+  if [ "$ocount" == "${#octoprint_data[*]}" ]; then
+    OCTOPRINT_STATUS="$(printf "${green}Installed: %-5s${default}" $SERVICE_FILE_COUNT)"
+  elif [ "$ocount" == 0 ]; then
+    OCTOPRINT_STATUS="${red}Not installed!${default}  "
+  else
+    OCTOPRINT_STATUS="${yellow}Incomplete!${default}     "
+  fi
+}
+
+klipperscreen_status(){
+  klsccount=0
+  klipperscreen_data=(
+    SERVICE
+    $KLIPPERSCREEN_DIR
+    $KLIPPERSCREEN_ENV_DIR
+  )
+
+  ### count amount of klipperscreen_data service files in /etc/systemd/system
+  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "KlipperScreen" | wc -l)
+
+  ### remove the "SERVICE" entry from the klipperscreen_data array if a KlipperScreen service is installed
+  [ $SERVICE_FILE_COUNT -gt 0 ] && unset klipperscreen_data[0]
+
+  #count+1 for each found data-item from array
+  for klscd in "${klipperscreen_data[@]}"
+  do
+    if [ -e $klscd ]; then
+      klsccount=$(expr $klsccount + 1)
+    fi
+  done
+  if [ "$klsccount" == "${#klipperscreen_data[*]}" ]; then
+    KLIPPERSCREEN_STATUS="${green}Installed!${default}      "
+  elif [ "$klsccount" == 0 ]; then
+    KLIPPERSCREEN_STATUS="${red}Not installed!${default}  "
+  else
+    KLIPPERSCREEN_STATUS="${yellow}Incomplete!${default}     "
+  fi
+}
+
+MoonrakerTelegramBot_status(){
+  mtbcount=0
+  MoonrakerTelegramBot_data=(
+    SERVICE
+    $MOONRAKER_TELEGRAM_BOT_DIR
+    $MOONRAKER_TELEGRAM_BOT_ENV_DIR
+  )
+
+  ### count amount of MoonrakerTelegramBot_data service files in /etc/systemd/system
+  SERVICE_FILE_COUNT=$(ls /etc/systemd/system | grep -E "moonraker-telegram-bot" | wc -l)
+
+  ### remove the "SERVICE" entry from the MoonrakerTelegramBot_data array if a MoonrakerTelegramBot service is installed
+  [ $SERVICE_FILE_COUNT -gt 0 ] && unset MoonrakerTelegramBot_data[0]
+
+  #count+1 for each found data-item from array
+  for mtbd in "${MoonrakerTelegramBot_data[@]}"
+  do
+    if [ -e $mtbd ]; then
+      mtbcount=$(expr $mtbcount + 1)
+    fi
+  done
+  if [ "$mtbcount" == "${#MoonrakerTelegramBot_data[*]}" ]; then
+    MOONRAKER_TELEGRAM_BOT_STATUS="${green}Installed!${default}      "
+  elif [ "$mtbcount" == 0 ]; then
+    MOONRAKER_TELEGRAM_BOT_STATUS="${red}Not installed!${default}  "
+  else
+    MOONRAKER_TELEGRAM_BOT_STATUS="${yellow}Incomplete!${default}     "
+  fi
+}
+
+#############################################################
+#############################################################
+
+### reading the klipper branch the user is currently on
 read_branch(){
-  if [ -d $KLIPPER_DIR ] && [ -d $KLIPPER_DIR/.git ]; then
+  if [ -d $KLIPPER_DIR/.git ]; then
     cd $KLIPPER_DIR
-    GET_BRANCH=$(git branch -a | head -1 | cut -d " " -f5 | cut -d ")" -f1)
-    #if reading the branch gives an empty string
-    #we are on non-detached HEAD state on origin/master
-    #and need to set GET_BRANCH to make a non-empty string
-    if [ -z $GET_BRANCH ]; then
-      GET_BRANCH="origin/master"
+    GET_BRANCH="$(git branch | grep "*" | cut -d"*" -f2 | cut -d" " -f2)"
+    ### try to fix a detached HEAD state and read the correct branch from the output you get
+    if [ "$(echo $GET_BRANCH | grep "HEAD" )" ]; then
+      DETACHED_HEAD="true"
+      GET_BRANCH=$(git branch | grep "HEAD" | rev | cut -d" " -f1 | rev | cut -d")" -f1 | cut -d"/" -f2)
+      ### try to identify the branch when the HEAD was detached at a single commit
+      ### will only work if its either master, scurve-shaping or scurve-smoothing branch
+      if [[ $GET_BRANCH =~ [[:alnum:]] ]]; then
+        if [ "$(git branch -r --contains $GET_BRANCH | grep "master")" ]; then
+          GET_BRANCH="master"
+        elif [ "$(git branch -r --contains $GET_BRANCH | grep "scurve-shaping")" ]; then
+          GET_BRANCH="scurve-shaping"
+        elif [ "$(git branch -r --contains $GET_BRANCH | grep "scurve-smoothing")" ]; then
+          GET_BRANCH="scurve-smoothing"
+        fi
+      fi
     fi
   else
     GET_BRANCH=""
   fi
 }
 
+#prints the current klipper branch in the main menu
 print_branch(){
   read_branch
-  if [ "$GET_BRANCH" == "origin/master" ]; then
-    PRINT_BRANCH="${cyan}$GET_BRANCH${default}      "
-  elif [ "$GET_BRANCH" == "dmbutyugin/scurve-shaping" ]; then
-    PRINT_BRANCH="${cyan}scurve-shaping${default}     "
-  elif [ "$GET_BRANCH" == "dmbutyugin/scurve-smoothing" ]; then
-    PRINT_BRANCH="${cyan}scurve-smoothing${default}   "
-  elif [ "$GET_BRANCH" == "Arksine/work-web_server-20200131" ]; then
-    PRINT_BRANCH="${cyan}moonraker${default}          "
-  elif [ "$GET_BRANCH" == "Arksine/dev-moonraker-testing" ]; then
-    PRINT_BRANCH="${cyan}dev-moonraker${default}      "
+  if [ ! -z "$GET_BRANCH" ]; then
+    PRINT_BRANCH="$(printf "%-16s" "$GET_BRANCH")"
   else
-    PRINT_BRANCH="${red}----${default}               "
+    PRINT_BRANCH="${red}--------------${default}  "
   fi
 }
 
 read_local_klipper_commit(){
   if [ -d $KLIPPER_DIR ] && [ -d $KLIPPER_DIR/.git ]; then
     cd $KLIPPER_DIR
-    LOCAL_COMMIT=$(git rev-parse --short=8 HEAD)
+    LOCAL_COMMIT=$(git describe HEAD --always --tags | cut -d "-" -f 1,2)
   else
-    LOCAL_COMMIT=""
+    LOCAL_COMMIT=$NONE
   fi
 }
 
 read_remote_klipper_commit(){
   read_branch
-  if [ ! -z $GET_BRANCH ];then
-    REMOTE_COMMIT=$(git rev-parse --short=8 $GET_BRANCH)
+  if [ ! -z "$GET_BRANCH" ];then
+    if [ "$GET_BRANCH" = "origin/master" ] || [ "$GET_BRANCH" = "master" ]; then
+      git fetch origin -q
+      REMOTE_COMMIT=$(git describe origin/master --always --tags | cut -d "-" -f 1,2)
+    elif [ "$GET_BRANCH" = "scurve-shaping" ]; then
+      git fetch dmbutyugin scurve-shaping -q
+      REMOTE_COMMIT=$(git describe dmbutyugin/scurve-shaping --always --tags | cut -d "-" -f 1,2)
+    elif [ "$GET_BRANCH" = "scurve-smoothing" ]; then
+      git fetch dmbutyugin scurve-smoothing -q
+      REMOTE_COMMIT=$(git describe dmbutyugin/scurve-smoothing --always --tags | cut -d "-" -f 1,2)
+    fi
   else
-    REMOTE_COMMIT=""
+    REMOTE_COMMIT=$NONE
   fi
 }
 
 compare_klipper_versions(){
-  read_local_klipper_commit
-  read_remote_klipper_commit
-  #echo "Local: $LOCAL_COMMIT"
-  #echo "Remote: $REMOTE_COMMIT"
+  unset KLIPPER_UPDATE_AVAIL
+  read_local_klipper_commit && read_remote_klipper_commit
   if [ "$LOCAL_COMMIT" != "$REMOTE_COMMIT" ]; then
-    LOCAL_COMMIT="${yellow}$LOCAL_COMMIT${default}"
-    REMOTE_COMMIT="${green}$REMOTE_COMMIT${default}"
+    LOCAL_COMMIT="${yellow}$(printf "%-12s" "$LOCAL_COMMIT")${default}"
+    REMOTE_COMMIT="${green}$(printf "%-12s" "$REMOTE_COMMIT")${default}"
+    # add klipper to the update all array for the update all function in the updater
+    KLIPPER_UPDATE_AVAIL="true" && update_arr+=(update_klipper)
   else
-    LOCAL_COMMIT="${green}$LOCAL_COMMIT${default}"
-    REMOTE_COMMIT="${green}$REMOTE_COMMIT${default}"
+    LOCAL_COMMIT="${green}$(printf "%-12s" "$LOCAL_COMMIT")${default}"
+    REMOTE_COMMIT="${green}$(printf "%-12s" "$REMOTE_COMMIT")${default}"
+    KLIPPER_UPDATE_AVAIL="false"
+  fi
+  #if detached head was found, force the user with warn message to update klipper
+  if [ "$DETACHED_HEAD" == "true" ]; then
+    LOCAL_COMMIT="${red}$(printf "%-12s" "Need update!")${default}"
   fi
 }
 
+#############################################################
+#############################################################
+
 read_dwc2fk_versions(){
   if [ -d $DWC2FK_DIR ] && [ -d $DWC2FK_DIR/.git ]; then
     cd $DWC2FK_DIR
-    LOCAL_DWC2FK_COMMIT=$(git rev-parse --short=8 HEAD)
-    REMOTE_DWC2FK_COMMIT=$(git rev-parse --short=8 origin/master)
+    git fetch origin master -q
+    LOCAL_DWC2FK_COMMIT=$(git describe HEAD --always --tags | cut -d "-" -f 1,2)
+    REMOTE_DWC2FK_COMMIT=$(git describe origin/master --always --tags | cut -d "-" -f 1,2)
   else
-    LOCAL_DWC2FK_COMMIT=""
-    REMOTE_DWC2FK_COMMIT=""
+    LOCAL_DWC2FK_COMMIT=$NONE
+    REMOTE_DWC2FK_COMMIT=$NONE
   fi
 }
 
 compare_dwc2fk_versions(){
+  unset DWC2FK_UPDATE_AVAIL
   read_dwc2fk_versions
-  #echo "Local: $LOCAL_DWC2FK_COMMIT"
-  #echo "Remote: $REMOTE_DWC2FK_COMMIT"
   if [ "$LOCAL_DWC2FK_COMMIT" != "$REMOTE_DWC2FK_COMMIT" ]; then
-    LOCAL_DWC2FK_COMMIT="${yellow}$LOCAL_DWC2FK_COMMIT${default}"
-    REMOTE_DWC2FK_COMMIT="${green}$REMOTE_DWC2FK_COMMIT${default}"
+    LOCAL_DWC2FK_COMMIT="${yellow}$(printf "%-12s" "$LOCAL_DWC2FK_COMMIT")${default}"
+    REMOTE_DWC2FK_COMMIT="${green}$(printf "%-12s" "$REMOTE_DWC2FK_COMMIT")${default}"
+    # add dwc2fk to the update all array for the update all function in the updater
+    DWC2FK_UPDATE_AVAIL="true" && update_arr+=(update_dwc2fk)
   else
-    LOCAL_DWC2FK_COMMIT="${green}$LOCAL_DWC2FK_COMMIT${default}"
-    REMOTE_DWC2FK_COMMIT="${green}$REMOTE_DWC2FK_COMMIT${default}"
+    LOCAL_DWC2FK_COMMIT="${green}$(printf "%-12s" "$LOCAL_DWC2FK_COMMIT")${default}"
+    REMOTE_DWC2FK_COMMIT="${green}$(printf "%-12s" "$REMOTE_DWC2FK_COMMIT")${default}"
+    DWC2FK_UPDATE_AVAIL="false"
   fi
 }
 
 read_local_dwc2_version(){
-  if [ -e $DWC2_DIR/web/version ]; then
-    DWC2_LOCAL_VER=$(head -n 1 $DWC2_DIR/web/version)
+  unset DWC2_VER_FOUND
+  if [ -e $DWC2_DIR/.version ]; then
+    DWC2_VER_FOUND="true"
+    DWC2_LOCAL_VER=$(head -n 1 $DWC2_DIR/.version)
   else
-    DWC2_LOCAL_VER=""
+    DWC2_VER_FOUND="false" && unset DWC2_LOCAL_VER
   fi
 }
 
 read_remote_dwc2_version(){
-  DWC2_REMOTE_VER=$(curl -s https://api.github.com/repositories/28820678/releases/latest | grep tag_name | cut -d'"' -f4)
+  #remote checks don't work without curl installed!
+  if [[ ! $(dpkg-query -f'${Status}' --show curl 2>/dev/null) = *\ installed ]]; then
+    DWC2_REMOTE_VER=$NONE
+  else
+    get_dwc_ver
+    DWC2_REMOTE_VER=$DWC2_VERSION
+  fi
 }
 
 compare_dwc2_versions(){
-  read_local_dwc2_version
-  read_remote_dwc2_version
-  #echo "Local: $DWC2_LOCAL_VER"
-  #echo "Remote: $DWC2_REMOTE_VER"
-  if [ "$DWC2_LOCAL_VER" != "$DWC2_REMOTE_VER" ]; then
-    DWC2_LOCAL_VER="${yellow}$DWC2_LOCAL_VER${default}"
-    DWC2_REMOTE_VER="${green}$DWC2_REMOTE_VER${default}"
+  unset DWC2_UPDATE_AVAIL
+  read_local_dwc2_version && read_remote_dwc2_version
+  if [[ $DWC2_VER_FOUND = "true" ]] && [[ $DWC2_LOCAL_VER == $DWC2_REMOTE_VER ]]; then
+    #printf fits the string for displaying it in the ui to a total char length of 12
+    DWC2_LOCAL_VER="${green}$(printf "%-12s" "$DWC2_LOCAL_VER")${default}"
+    DWC2_REMOTE_VER="${green}$(printf "%-12s" "$DWC2_REMOTE_VER")${default}"
+  elif [[ $DWC2_VER_FOUND = "true" ]] && [[ $DWC2_LOCAL_VER != $DWC2_REMOTE_VER ]]; then
+    DWC2_LOCAL_VER="${yellow}$(printf "%-12s" "$DWC2_LOCAL_VER")${default}"
+    DWC2_REMOTE_VER="${green}$(printf "%-12s" "$DWC2_REMOTE_VER")${default}"
+    # add dwc to the update all array for the update all function in the updater
+    DWC2_UPDATE_AVAIL="true" && update_arr+=(update_dwc2)
   else
-    DWC2_LOCAL_VER="${green}$DWC2_LOCAL_VER${default}"
-    DWC2_REMOTE_VER="${green}$DWC2_REMOTE_VER${default}"
+    DWC2_LOCAL_VER=$NONE
+    DWC2_REMOTE_VER="${green}$(printf "%-12s" "$DWC2_REMOTE_VER")${default}"
+    DWC2_UPDATE_AVAIL="false"
+  fi
+}
+
+#############################################################
+#############################################################
+
+read_moonraker_versions(){
+  if [ -d $MOONRAKER_DIR ] && [ -d $MOONRAKER_DIR/.git ]; then
+    cd $MOONRAKER_DIR
+    git fetch origin master -q
+    LOCAL_MOONRAKER_COMMIT=$(git describe HEAD --always --tags | cut -d "-" -f 1,2)
+    REMOTE_MOONRAKER_COMMIT=$(git describe origin/master --always --tags | cut -d "-" -f 1,2)
+  else
+    LOCAL_MOONRAKER_COMMIT=$NONE
+    REMOTE_MOONRAKER_COMMIT=$NONE
+  fi
+}
+
+compare_moonraker_versions(){
+  unset MOONRAKER_UPDATE_AVAIL
+  read_moonraker_versions
+  if [ "$LOCAL_MOONRAKER_COMMIT" != "$REMOTE_MOONRAKER_COMMIT" ]; then
+    LOCAL_MOONRAKER_COMMIT="${yellow}$(printf "%-12s" "$LOCAL_MOONRAKER_COMMIT")${default}"
+    REMOTE_MOONRAKER_COMMIT="${green}$(printf "%-12s" "$REMOTE_MOONRAKER_COMMIT")${default}"
+    # add moonraker to the update all array for the update all function in the updater
+    MOONRAKER_UPDATE_AVAIL="true" && update_arr+=(update_moonraker)
+  else
+    LOCAL_MOONRAKER_COMMIT="${green}$(printf "%-12s" "$LOCAL_MOONRAKER_COMMIT")${default}"
+    REMOTE_MOONRAKER_COMMIT="${green}$(printf "%-12s" "$REMOTE_MOONRAKER_COMMIT")${default}"
+    MOONRAKER_UPDATE_AVAIL="false"
   fi
 }
 
 read_local_mainsail_version(){
-  if [ -e $MAINSAIL_DIR/version ]; then
-    MAINSAIL_LOCAL_VER=$(head -n 1 $MAINSAIL_DIR/version)
+  unset MAINSAIL_VER_FOUND
+  if [ -e $MAINSAIL_DIR/.version ]; then
+    MAINSAIL_VER_FOUND="true"
+    MAINSAIL_LOCAL_VER=$(head -n 1 $MAINSAIL_DIR/.version)
   else
-    MAINSAIL_LOCAL_VER=""
+    MAINSAIL_VER_FOUND="false" && unset MAINSAIL_LOCAL_VER
   fi
 }
 
 read_remote_mainsail_version(){
-  get_mainsail_ver
-  MAINSAIL_REMOTE_VER=$MAINSAIL_VERSION
-}
-
-compare_mainsail_versions(){
-  read_local_mainsail_version
-  read_remote_mainsail_version
-  #echo "Local: $MAINSAIL_LOCAL_VER"
-  #echo "Remote: $MAINSAIL_REMOTE_VER"
-  if [ "$MAINSAIL_LOCAL_VER" != "$MAINSAIL_REMOTE_VER" ]; then
-    MAINSAIL_LOCAL_VER="${yellow}$MAINSAIL_LOCAL_VER${default}"
-    MAINSAIL_REMOTE_VER="${green}$MAINSAIL_REMOTE_VER${default}"
+  #remote checks don't work without curl installed!
+  if [[ ! $(dpkg-query -f'${Status}' --show curl 2>/dev/null) = *\ installed ]]; then
+    MAINSAIL_REMOTE_VER=$NONE
   else
-    MAINSAIL_LOCAL_VER="${green}$MAINSAIL_LOCAL_VER${default}"
-    MAINSAIL_REMOTE_VER="${green}$MAINSAIL_REMOTE_VER${default}"
+    get_mainsail_ver
+    MAINSAIL_REMOTE_VER=$MAINSAIL_VERSION
   fi
 }
 
+compare_mainsail_versions(){
+  unset MAINSAIL_UPDATE_AVAIL
+  read_local_mainsail_version && read_remote_mainsail_version
+  if [[ $MAINSAIL_VER_FOUND = "true" ]] && [[ $MAINSAIL_LOCAL_VER == $MAINSAIL_REMOTE_VER ]]; then
+    #printf fits the string for displaying it in the ui to a total char length of 12
+    MAINSAIL_LOCAL_VER="${green}$(printf "%-12s" "$MAINSAIL_LOCAL_VER")${default}"
+    MAINSAIL_REMOTE_VER="${green}$(printf "%-12s" "$MAINSAIL_REMOTE_VER")${default}"
+  elif [[ $MAINSAIL_VER_FOUND = "true" ]] && [[ $MAINSAIL_LOCAL_VER != $MAINSAIL_REMOTE_VER ]]; then
+    MAINSAIL_LOCAL_VER="${yellow}$(printf "%-12s" "$MAINSAIL_LOCAL_VER")${default}"
+    MAINSAIL_REMOTE_VER="${green}$(printf "%-12s" "$MAINSAIL_REMOTE_VER")${default}"
+    # add mainsail to the update all array for the update all function in the updater
+    MAINSAIL_UPDATE_AVAIL="true" && update_arr+=(update_mainsail)
+  else
+    MAINSAIL_LOCAL_VER=$NONE
+    MAINSAIL_REMOTE_VER="${green}$(printf "%-12s" "$MAINSAIL_REMOTE_VER")${default}"
+    MAINSAIL_UPDATE_AVAIL="false"
+  fi
+}
+
+read_local_fluidd_version(){
+  unset FLUIDD_VER_FOUND
+  if [ -e $FLUIDD_DIR/.version ]; then
+    FLUIDD_VER_FOUND="true"
+    FLUIDD_LOCAL_VER=$(head -n 1 $FLUIDD_DIR/.version)
+  else
+    FLUIDD_VER_FOUND="false" && unset FLUIDD_LOCAL_VER
+  fi
+}
+
+read_remote_fluidd_version(){
+  #remote checks don't work without curl installed!
+  if [[ ! $(dpkg-query -f'${Status}' --show curl 2>/dev/null) = *\ installed ]]; then
+    FLUIDD_REMOTE_VER=$NONE
+  else
+    get_fluidd_ver
+    FLUIDD_REMOTE_VER=$FLUIDD_VERSION
+  fi
+}
+
+compare_fluidd_versions(){
+  unset FLUIDD_UPDATE_AVAIL
+  read_local_fluidd_version && read_remote_fluidd_version
+  if [[ $FLUIDD_VER_FOUND = "true" ]] && [[ $FLUIDD_LOCAL_VER == $FLUIDD_REMOTE_VER ]]; then
+    #printf fits the string for displaying it in the ui to a total char length of 12
+    FLUIDD_LOCAL_VER="${green}$(printf "%-12s" "$FLUIDD_LOCAL_VER")${default}"
+    FLUIDD_REMOTE_VER="${green}$(printf "%-12s" "$FLUIDD_REMOTE_VER")${default}"
+  elif [[ $FLUIDD_VER_FOUND = "true" ]] && [[ $FLUIDD_LOCAL_VER != $FLUIDD_REMOTE_VER ]]; then
+    FLUIDD_LOCAL_VER="${yellow}$(printf "%-12s" "$FLUIDD_LOCAL_VER")${default}"
+    FLUIDD_REMOTE_VER="${green}$(printf "%-12s" "$FLUIDD_REMOTE_VER")${default}"
+    # add fluidd to the update all array for the update all function in the updater
+    FLUIDD_UPDATE_AVAIL="true" && update_arr+=(update_fluidd)
+  else
+    FLUIDD_LOCAL_VER=$NONE
+    FLUIDD_REMOTE_VER="${green}$(printf "%-12s" "$FLUIDD_REMOTE_VER")${default}"
+    FLUIDD_UPDATE_AVAIL="false"
+  fi
+}
+
+read_klipperscreen_versions(){
+  if [ -d $KLIPPERSCREEN_DIR ] && [ -d $KLIPPERSCREEN_DIR/.git ]; then
+    cd $KLIPPERSCREEN_DIR
+    git fetch origin master -q
+    LOCAL_KLIPPERSCREEN_COMMIT=$(git describe HEAD --always --tags | cut -d "-" -f 1,2)
+    REMOTE_KLIPPERSCREEN_COMMIT=$(git describe origin/master --always --tags | cut -d "-" -f 1,2)
+  else
+    LOCAL_KLIPPERSCREEN_COMMIT=$NONE
+    REMOTE_KLIPPERSCREEN_COMMIT=$NONE
+  fi
+}
+
+compare_klipperscreen_versions(){
+  unset KLIPPERSCREEN_UPDATE_AVAIL
+  read_klipperscreen_versions
+  if [ "$LOCAL_KLIPPERSCREEN_COMMIT" != "$REMOTE_KLIPPERSCREEN_COMMIT" ]; then
+    LOCAL_KLIPPERSCREEN_COMMIT="${yellow}$(printf "%-12s" "$LOCAL_KLIPPERSCREEN_COMMIT")${default}"
+    REMOTE_KLIPPERSCREEN_COMMIT="${green}$(printf "%-12s" "$REMOTE_KLIPPERSCREEN_COMMIT")${default}"
+    KLIPPERSCREEN_UPDATE_AVAIL="true"
+    update_arr+=(update_klipperscreen)
+  else
+    LOCAL_KLIPPERSCREEN_COMMIT="${green}$(printf "%-12s" "$LOCAL_KLIPPERSCREEN_COMMIT")${default}"
+    REMOTE_KLIPPERSCREEN_COMMIT="${green}$(printf "%-12s" "$REMOTE_KLIPPERSCREEN_COMMIT")${default}"
+    KLIPPERSCREEN_UPDATE_AVAIL="false"
+  fi
+}
+
+read_MoonrakerTelegramBot_versions(){
+  if [ -d $MOONRAKER_TELEGRAM_BOT_DIR ] && [ -d $MOONRAKER_TELEGRAM_BOT_DIR/.git ]; then
+    cd $MOONRAKER_TELEGRAM_BOT_DIR
+    git fetch origin master -q
+    LOCAL_MOONRAKER_TELEGRAM_BOT_COMMIT=$(git describe HEAD --always --tags | cut -d "-" -f 1,2)
+    REMOTE_MOONRAKER_TELEGRAM_BOT_COMMIT=$(git describe origin/master --always --tags | cut -d "-" -f 1,2)
+  else
+    LOCAL_MOONRAKER_TELEGRAM_BOT_COMMIT=$NONE
+    REMOTE_MOONRAKER_TELEGRAM_BOT_COMMIT=$NONE
+  fi
+}
+
+compare_MoonrakerTelegramBot_versions(){
+  unset MOONRAKER_TELEGRAM_BOT_UPDATE_AVAIL
+  read_MoonrakerTelegramBot_versions
+  if [ "$LOCAL_MOONRAKER_TELEGRAM_BOT_COMMIT" != "$REMOTE_MOONRAKER_TELEGRAM_BOT_COMMIT" ]; then
+    LOCAL_MOONRAKER_TELEGRAM_BOT_COMMIT="${yellow}$(printf "%-12s" "$LOCAL_MOONRAKER_TELEGRAM_BOT_COMMIT")${default}"
+    REMOTE_MOONRAKER_TELEGRAM_BOT_COMMIT="${green}$(printf "%-12s" "$REMOTE_MOONRAKER_TELEGRAM_BOT_COMMIT")${default}"
+    # add moonraker telegram bot to the update all array for the update all function in the updater
+    MOONRAKER_TELEGRAM_BOT_UPDATE_AVAIL="true" && update_arr+=(update_MoonrakerTelegramBot)
+  else
+    LOCAL_MOONRAKER_TELEGRAM_BOT_COMMIT="${green}$(printf "%-12s" "$LOCAL_MOONRAKER_TELEGRAM_BOT_COMMIT")${default}"
+    REMOTE_MOONRAKER_TELEGRAM_BOT_COMMIT="${green}$(printf "%-12s" "$REMOTE_MOONRAKER_TELEGRAM_BOT_COMMIT")${default}"
+    MOONRAKER_TELEGRAM_BOT_UPDATE_AVAIL="false"
+  fi
+}
+
+
+#############################################################
+#############################################################
+
+read_pgc_versions(){
+  PGC_DIR="${HOME}/pgcode"
+  if [ -d $PGC_DIR ] && [ -d $PGC_DIR/.git ]; then
+    cd $PGC_DIR
+    git fetch origin main -q
+    LOCAL_PGC_COMMIT=$(git describe HEAD --always --tags | cut -d "-" -f 1,2)
+    REMOTE_PGC_COMMIT=$(git describe origin/main --always --tags | cut -d "-" -f 1,2)
+  else
+    LOCAL_PGC_COMMIT=$NONE
+    REMOTE_PGC_COMMIT=$NONE
+  fi
+}
+
+compare_pgc_versions(){
+  unset PGC_UPDATE_AVAIL
+  read_pgc_versions
+  if [ "$LOCAL_PGC_COMMIT" != "$REMOTE_PGC_COMMIT" ]; then
+    LOCAL_PGC_COMMIT="${yellow}$(printf "%-12s" "$LOCAL_PGC_COMMIT")${default}"
+    REMOTE_PGC_COMMIT="${green}$(printf "%-12s" "$REMOTE_PGC_COMMIT")${default}"
+    # add PGC to the update all array for the update all function in the updater
+    PGC_UPDATE_AVAIL="true" && update_arr+=(update_pgc_for_klipper)
+  else
+    LOCAL_PGC_COMMIT="${green}$(printf "%-12s" "$LOCAL_PGC_COMMIT")${default}"
+    REMOTE_PGC_COMMIT="${green}$(printf "%-12s" "$REMOTE_PGC_COMMIT")${default}"
+    PGC_UPDATE_AVAIL="false"
+  fi
+}
+
+#############################################################
+#############################################################
+
+#display this as placeholder if no version/commit could be fetched
+NONE="${red}$(printf "%-12s" "--------")${default}"
+
 ui_print_versions(){
+  unset update_arr
+  check_system_updates
   compare_klipper_versions
   compare_dwc2fk_versions
   compare_dwc2_versions
+  compare_moonraker_versions
   compare_mainsail_versions
-}
+  compare_fluidd_versions
+  compare_klipperscreen_versions
+  compare_MoonrakerTelegramBot_versions
+  compare_pgc_versions
+}

scripts/switch_branch.sh

@@ -1,7 +1,7 @@
-switch_to_origin(){
+switch_to_master(){
   cd $KLIPPER_DIR
   status_msg "Switching...Please wait ..."; echo
-  git fetch origin -q && git checkout origin/master -q
+  git fetch origin -q && git checkout master; echo
 }
 
 switch_to_scurve_shaping(){
@@ -10,7 +10,7 @@ switch_to_scurve_shaping(){
   if ! git remote | grep dmbutyugin -q; then
     git remote add dmbutyugin $DMBUTYUGIN_REPO
   fi
-  git fetch dmbutyugin -q && git checkout $BRANCH_SCURVE_SHAPING -q
+  git fetch dmbutyugin -q && git checkout scurve-shaping; echo
 }
 
 switch_to_scurve_smoothing(){
@@ -19,23 +19,5 @@ switch_to_scurve_smoothing(){
   if ! git remote | grep dmbutyugin -q; then
     git remote add dmbutyugin $DMBUTYUGIN_REPO
   fi
-  git fetch dmbutyugin -q && git checkout $BRANCH_SCURVE_SMOOTHING -q
-}
-
-switch_to_moonraker(){
-  cd $KLIPPER_DIR
-  status_msg "Switching...Please wait ..."; echo
-  if ! git remote | grep Arksine -q; then
-    git remote add Arksine $ARKSINE_REPO
-  fi
-  git fetch Arksine -q && git checkout $BRANCH_MOONRAKER -q
-}
-
-switch_to_dev_moonraker(){
-  cd $KLIPPER_DIR
-  status_msg "Switching...Please wait ..."; echo
-  if ! git remote | grep Arksine -q; then
-    git remote add Arksine $ARKSINE_REPO
-  fi
-  git fetch Arksine -q && git checkout $BRANCH_DEV_MOONRAKER -q
+  git fetch dmbutyugin -q && git checkout scurve-smoothing; echo
 }

scripts/ui.sh

@@ -1,154 +0,0 @@
-### set up some UI stuff
-
-#ui total width = 57 chars
-top_border(){
-  echo -e "/=======================================================\ "
-}
-
-bottom_border(){
-  echo -e "\=======================================================/"
-}
-
-hr(){
-  echo -e "|-------------------------------------------------------|"
-}
-
-quit_footer(){
-  hr
-  echo -e "|                        ${red}Q) Quit${default}                        | "
-  bottom_border
-}
-
-print_header(){
-  top_border
-  echo -e "|     $(title_msg "~~~~~~~~~~~~~~~~~ [ KIAUH ] ~~~~~~~~~~~~~~~~~")     |"
-  echo -e "|     $(title_msg "   Klipper Installation And Update Helper    ")     |"
-  echo -e "|     $(title_msg "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~")     |"
-  bottom_border
-}
-
-main_ui(){
-  top_border
-  echo -e "|     $(title_msg "~~~~~~~~~~~~~~~ [ Main Menu ] ~~~~~~~~~~~~~~~")     |"
-  hr
-  echo -e "|  0) [System status]  |                                |"
-  echo -e "|                      |    Klipper: $KLIPPER_STATUS|"
-  echo -e "|  1) [Install]        |     Branch: $PRINT_BRANCH|"
-  echo -e "|  2) [Update]         |                                |"
-  echo -e "|  3) [Remove]         |       DWC2: $DWC2_STATUS|"
-  echo -e "|                      |   Mainsail: $MAINSAIL_STATUS|"
-  echo -e "|  4) [Advanced]       |  Octoprint: #### WIP ####      |"
-  echo -e "|  5) [Backup]         |                                |"
-  quit_footer
-}
-
-install_ui(){
-  top_border
-  echo -e "|     $(title_msg "~~~~~~~~~~~ [ Installation Menu ] ~~~~~~~~~~~")     | "
-  hr
-  echo -e "|  You need this menu usually only for installing       | "
-  echo -e "|  all necessary dependencies for the various           | "
-  echo -e "|  functions on a completely fresh system.              | "
-  hr
-  echo -e "|  Firmware:             |                              | "
-  echo -e "|  1) [Klipper]          |                              | "
-  echo -e "|                        |                              | "
-  echo -e "|  Webinterface:         |                              | "
-  echo -e "|  2) [DWC2]             |                              | "
-  echo -e "|  3) [Mainsail]         |                              | "
-  echo -e "|                        |                              | "
-  quit_footer
-}
-
-update_ui(){
-  top_border
-  echo -e "|     $(title_msg "~~~~~~~~~~~~~~ [ Update Menu ] ~~~~~~~~~~~~~~")     | "
-  hr
-  echo -e "|  It's a good idea to check the following website      | "
-  echo -e "|  for important software changes to the config file    | "
-  echo -e "|  BEFORE updating your klipper installation:           | "
-  echo -e "|                                                       | "
-  echo -e "|  ${yellow}https://www.klipper3d.org/Config_Changes.html${default}        | "
-  bottom_border
-  top_border
-  echo -e "|  0) $BB4U_STATUS| "
-  hr
-  echo -e "|                        |  Local Vers:  | Remote Vers: | "
-  echo -e "|  Firmware:             |               |              | "
-  echo -e "|  1) [Klipper]          |  $(echo "$LOCAL_COMMIT")     | $(echo "$REMOTE_COMMIT")     | "
-  echo -e "|                        |               |              | "
-  echo -e "|  Webinterface:         |               |              | "
-  echo -e "|  2) [DWC2-for-Klipper] |  $(echo "$LOCAL_DWC2FK_COMMIT")     | $(echo "$REMOTE_DWC2FK_COMMIT")     | "
-  echo -e "|  3) [DWC2 Web UI]      |  $(echo "$DWC2_LOCAL_VER")        | $(echo "$DWC2_REMOTE_VER")        | "
-  echo -e "|  4) [Mainsail]         |  $(echo "$MAINSAIL_LOCAL_VER")       | $(echo "$MAINSAIL_REMOTE_VER")       | "
-  echo -e "|                        |               |              | "
-  quit_footer
-}
-
-remove_ui(){
-  top_border
-  echo -e "|     $(title_msg "~~~~~~~~~~~~~~ [ Remove Menu ] ~~~~~~~~~~~~~~")     | "
-  hr
-  echo -e "|  Files and directories which remain untouched:        | "
-  echo -e "|  --> ~/printer.cfg                                    | "
-  echo -e "|  --> ~/backup                                         | "
-  echo -e "|  You need remove them manually if you wish so.        | "
-  hr
-  echo -e "|  1) [Klipper]          |                              | "
-  echo -e "|  2) [DWC2-for-Klipper] |                              | "
-  echo -e "|  3) [Mainsail]         |                              | "
-  echo -e "|                        |                              | "
-  quit_footer
-}
-
-advanced_ui(){
-  top_border
-  echo -e "|     $(title_msg "~~~~~~~~~~~~~ [ Advanced Menu ] ~~~~~~~~~~~~~")     | "
-  hr
-  echo -e "|  1) [Switch Klipper version]                          | "
-  echo -e "|                                                       | "
-  echo -e "|  2) [Build Firmware]                                  | "
-  echo -e "|  3) [Flash MCU]                                       | "
-  echo -e "|  4) [Get Printer-ID]                                  | "
-  echo -e "|  5) [Write Printer-ID to printer.cfg]                 | "
-  echo -e "|  6) [Write DWC2-for-klipper config]                   | "
-  echo -e "|                                                       | "
-  echo -e "|  x) [Enable/Disable Octoprint service]                | "
-  echo -e "|                                                       | "
-quit_footer
-}
-
-backup_ui(){
-  top_border
-  echo -e "|     $(title_msg "~~~~~~~~~~~~~~ [ Backup Menu ] ~~~~~~~~~~~~~~")     | "
-  hr
-  echo -e "|                                                       | "
-  hr
-  echo -e "|  1) [        ]                                        | "
-  echo -e "|  2) [        ]                                        | "
-  echo -e "|  3) [        ]                                        | "
-  echo -e "|  4) [        ]                                        | "
-  echo -e "|  5) [        ]                                        | "
-  echo -e "|  6) [        ]                                        | "
-  echo -e "|  7) [        ]                                        | "
-  echo -e "|                                                       | "
-  quit_footer
-}
-
-switch_ui(){
-  top_border
-  echo -e "|     $(title_msg "~~~~~~~~~ [ Switch Klipper Branch ] ~~~~~~~~~")     |"
-  bottom_border
-  echo
-  echo -e " $(title_msg "Active branch: ")${green}$GET_BRANCH${default}"
-  echo
-  top_border
-  echo -e "|  1) [--> origin/master]                               | "
-  echo -e "|                                                       | "
-  echo -e "|  2) [--> scurve-shaping]                              | "
-  echo -e "|  3) [--> scurve-smoothing]                            | "
-  echo -e "|                                                       | "
-  echo -e "|  4) [--> moonraker]                                   | "
-  echo -e "|  5) [--> dev-moonraker]                               | "
-  quit_footer
-}

scripts/ui/advanced_menu.sh

@@ -0,0 +1,179 @@
+advanced_ui(){
+  top_border
+  echo -e "|     ${yellow}~~~~~~~~~~~~~ [ Advanced Menu ] ~~~~~~~~~~~~~${default}     | "
+  hr
+  if [ ! "$OPRINT_SERVICE_STATUS" == "" ]; then
+    echo -e "|  0) $OPRINT_SERVICE_STATUS| "
+    hr
+    echo -e "|                           |                           | "
+  fi
+  echo -e "|  Klipper:                 |  Mainsail:                | "
+  echo -e "|  1) [Switch Branch]       |  7) [Theme installer]     | "
+  echo -e "|  2) [Rollback]            |                           | "
+  echo -e "|                           |  System:                  | "
+  echo -e "|  Firmware:                |  8) [Change hostname]     | "
+  echo -e "|  3) [Build only]          |                           | "
+  echo -e "|  4) [Flash only]          |  Extensions:              | "
+  echo -e "|  5) [Build + Flash]       |  9) [Shell Command]       | "
+  echo -e "|  6) [Get MCU ID]          |                           | "
+  echo -e "|                           |  CustomPiOS:              | "
+  echo -e "|                           |  10) [Migration Helper]   | "
+back_footer
+}
+
+advanced_menu(){
+  read_octoprint_service_status
+  do_action "" "advanced_ui"
+  while true; do
+    read -p "${cyan}Perform action:${default} " action; echo
+    case "$action" in
+      0)
+        clear
+        print_header
+        toggle_octoprint_service
+        read_octoprint_service_status
+        print_msg && clear_msg
+        advanced_ui;;
+      1)
+        do_action "switch_menu";;
+      2)
+        do_action "load_klipper_state" "advanced_ui";;
+      3)
+        do_action "build_fw" "advanced_ui";;
+      4)
+        clear && print_header
+        check_usergroup_dialout
+        do_action "select_flash_method" "advanced_ui";;
+      5)
+        clear && print_header
+        check_usergroup_dialout
+        status_msg "Please wait..."
+        build_fw && select_flash_method
+        print_msg && clear_msg
+        advanced_ui;;
+      6)
+        do_action "select_mcu_connection" "advanced_ui";;
+      7)
+        do_action "ms_theme_menu";;
+      8)
+        clear
+        print_header
+        create_custom_hostname && set_hostname
+        print_msg && clear_msg
+        advanced_ui;;
+      9)
+        do_action "setup_gcode_shell_command" "advanced_ui";;
+      10)
+        do_action "migration_menu";;
+      B|b)
+        clear; main_menu; break;;
+      *)
+        deny_action "advanced_ui";;
+    esac
+  done
+  advanced_menu
+}
+
+#############################################################
+#############################################################
+
+switch_ui(){
+  top_border
+  echo -e "|     $(title_msg "~~~~~~~~~ [ Switch Klipper Branch ] ~~~~~~~~~")     |"
+  bottom_border
+  echo
+  echo -e " $(title_msg "Active Branch: ")${green}$GET_BRANCH${default}"
+  echo
+  top_border
+  echo -e "|                                                       | "
+  echo -e "|  KevinOConnor:                                        | "
+  echo -e "|  1) [--> master]                                      | "
+  echo -e "|                                                       | "
+  echo -e "|  dmbutyugin:                                          | "
+  echo -e "|  2) [--> scurve-shaping]                              | "
+  echo -e "|  3) [--> scurve-smoothing]                            | "
+  back_footer
+}
+
+switch_menu(){
+  if [ -d $KLIPPER_DIR ]; then
+    read_branch
+    do_action "" "switch_ui"
+    while true; do
+      read -p "${cyan}Perform action:${default} " action; echo
+      case "$action" in
+        1)
+          clear
+          print_header
+          switch_to_master
+          read_branch
+          print_msg && clear_msg
+          switch_ui;;
+        2)
+          clear
+          print_header
+          switch_to_scurve_shaping
+          read_branch
+          print_msg && clear_msg
+          switch_ui;;
+        3)
+          clear
+          print_header
+          switch_to_scurve_smoothing
+          read_branch
+          print_msg && clear_msg
+          switch_ui;;
+        4)
+          clear
+          print_header
+          switch_to_moonraker
+          read_branch
+          print_msg && clear_msg
+          switch_ui;;
+        B|b)
+          clear; advanced_menu; break;;
+        *)
+          deny_action "switch_ui";;
+      esac
+    done
+  else
+    ERROR_MSG="No Klipper directory found! Download Klipper first!"
+  fi
+}
+
+#############################################################
+#############################################################
+
+migration_ui(){
+  top_border
+  echo -e "|     $(title_msg "~~~~~~~~~ [ CustomPiOS Migration ] ~~~~~~~~~~")     | "
+  hr
+  echo -e "|  This function will help you to migrate a vanilla     | "
+  echo -e "|  MainsailOS or FluiddPi image to a newer state.       | "
+  blank_line
+  echo -e "|  Only use this function if you use MainsailOS 0.4.0   | "
+  echo -e "|  or lower, or FluiddPi v1.13.0 or lower.              | "
+  blank_line
+  echo -e "|  Please have a look at the KIAUH changelog for more   | "
+  echo -e "|  details on what this function will do.               | "
+  hr
+  echo -e "|                                                       | "
+  echo -e "|  1) [Migrate MainsailOS]                              | "
+  echo -e "|  2) [Migrate FluiddPi]                                | "
+  echo -e "|                                                       | "
+  back_footer
+}
+
+migration_menu(){
+  print_msg && clear_msg
+  migration_ui
+  while true; do
+    read -p "${cyan}Perform action:${default} " action; echo
+    case "$action" in
+      1) migrate_custompios "mainsail"; migration_menu;;
+      2) migrate_custompios "fluiddpi"; migration_menu;;
+      B|b) clear; advanced_menu; break;;
+      *) print_unkown_cmd; migration_menu;;
+    esac
+  done
+}

scripts/ui/backup_menu.sh

@@ -0,0 +1,53 @@
+backup_ui(){
+  top_border
+  echo -e "|     $(title_msg "~~~~~~~~~~~~~~ [ Backup Menu ] ~~~~~~~~~~~~~~")     | "
+  hr
+  echo -e "|           ${yellow}Backup location: ~/kiauh-backups${default}            | "
+  hr
+  echo -e "|  Configuration folder: |  Klipper Webinterface:       | "
+  echo -e "|  0) [Klipper configs]  |  4) [Mainsail]               | "
+  echo -e "|                        |  5) [Fluidd]                 | "
+  echo -e "|  Firmware:             |                              | "
+  echo -e "|  1) [Klipper]          |  HDMI Screen:                | "
+  echo -e "|                        |  6) [KlipperScreen]          | "
+  echo -e "|  Klipper API:          |                              | "
+  echo -e "|  2) [Moonraker]        |  Other:                      | "
+  echo -e "|  3) [Moonraker DB]     |  7) [Duet Web Control]       | "
+  echo -e "|                        |  8) [OctoPrint]              | "
+  echo -e "|                        |  9) [MoonrakerTelegramBot]   | "
+  back_footer
+}
+
+backup_menu(){
+  do_action "" "backup_ui"
+  while true; do
+    read -p "${cyan}Perform action:${default} " action; echo
+    case "$action" in
+      0)
+        do_action "backup_klipper_config_dir" "backup_ui";;
+      1)
+        do_action "backup_klipper" "backup_ui";;
+      2)
+        do_action "backup_moonraker" "backup_ui";;
+      3)
+        do_action "backup_moonraker_database" "backup_ui";;
+      4)
+        do_action "backup_mainsail" "backup_ui";;
+      5)
+        do_action "backup_fluidd" "backup_ui";;
+      6)
+        do_action "backup_klipperscreen" "backup_ui";;
+      7)
+        do_action "backup_dwc2" "backup_ui";;
+      8)
+        do_action "backup_octoprint" "backup_ui";;
+      9)
+        do_action "backup_MoonrakerTelegramBot" "backup_ui";;
+      B|b)
+        clear; main_menu; break;;
+      *)
+        deny_action "backup_ui";;
+    esac
+  done
+  backup_menu
+}

scripts/ui/general_ui.sh

@@ -0,0 +1,75 @@
+#ui total width = 57 chars
+top_border(){
+  echo -e "/=======================================================\\"
+}
+
+bottom_border(){
+  echo -e "\=======================================================/"
+}
+
+blank_line(){
+  echo -e "|                                                       |"
+}
+
+hr(){
+  echo -e "|-------------------------------------------------------|"
+}
+
+quit_footer(){
+  hr
+  echo -e "|                        ${red}Q) Quit${default}                        |"
+  bottom_border
+}
+
+back_footer(){
+  hr
+  echo -e "|                       ${green}B) « Back${default}                       |"
+  bottom_border
+}
+
+back_help_footer(){
+  hr
+  echo -e "|         ${green}B) « Back${default}         |        ${yellow}H) Help [?]${default}        |"
+  bottom_border
+}
+
+print_header(){
+  top_border
+  echo -e "|     $(title_msg "~~~~~~~~~~~~~~~~~ [ KIAUH ] ~~~~~~~~~~~~~~~~~")     |"
+  echo -e "|     $(title_msg "   Klipper Installation And Update Helper    ")     |"
+  echo -e "|     $(title_msg "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~")     |"
+  bottom_border
+}
+
+kiauh_update_msg(){
+  top_border
+  echo -e "|${green}              New KIAUH update available!              ${default}| "
+  hr
+  echo -e "|${green}  View Changelog: https://git.io/JnmlX                 ${default}| "
+  blank_line
+  echo -e "|${yellow}  It is recommended to keep KIAUH up to date. Updates  ${default}| "
+  echo -e "|${yellow}  usually contain bugfixes, important changes or new   ${default}| "
+  echo -e "|${yellow}  features. Please consider updating!                  ${default}| "
+  bottom_border
+}
+
+################################################################################
+#******************************************************************************#
+################################################################################
+### TODO: rework other menus to make use of the following functions too and make them more readable
+
+do_action(){
+  clear && print_header
+  ### $1 is the action the user wants to fire
+  $1
+  print_msg && clear_msg
+  ### $2 is the menu the user usually gets directed back to after an action is completed
+  $2
+}
+
+deny_action(){
+  clear && print_header
+  print_unkown_cmd
+  print_msg && clear_msg
+  $1
+}

scripts/ui/install_menu.sh

@@ -0,0 +1,55 @@
+install_ui(){
+  top_border
+  echo -e "|     ${green}~~~~~~~~~~~ [ Installation Menu ] ~~~~~~~~~~~${default}     | "
+  hr
+  echo -e "|  You need this menu usually only for installing       | "
+  echo -e "|  all necessary dependencies for the various           | "
+  echo -e "|  functions on a completely fresh system.              | "
+  hr
+  echo -e "|  Firmware:                |  Touchscreen GUI:         | "
+  echo -e "|  1) [Klipper]             |  5) [KlipperScreen]       | "
+  echo -e "|                           |                           | "
+  echo -e "|  Klipper API:             |  Other:                   | "
+  echo -e "|  2) [Moonraker]           |  6) [Duet Web Control]    | "
+  echo -e "|                           |  7) [OctoPrint]           | "
+  echo -e "|  Klipper Webinterface:    |  8) [PrettyGCode]         | "
+  echo -e "|  3) [Mainsail]            |  9) [Telegram Bot]        | "
+  echo -e "|  4) [Fluidd]              |                           | "
+  echo -e "|                           |  Webcam:                  | "
+  echo -e "|                           |  10) [MJPG-Streamer]      | "
+  back_footer
+}
+
+install_menu(){
+  do_action "" "install_ui"
+  while true; do
+    read -p "${cyan}Perform action:${default} " action; echo
+    case "$action" in
+      1)
+        do_action "klipper_setup_dialog" "install_ui";;
+      2)
+        do_action "moonraker_setup_dialog" "install_ui";;
+      3)
+        do_action "install_webui mainsail" "install_ui";;
+      4)
+        do_action "install_webui fluidd" "install_ui";;
+      5)
+        do_action "install_klipperscreen" "install_ui";;
+      6)
+        do_action "dwc_setup_dialog" "install_ui";;
+      7)
+        do_action "octoprint_setup_dialog" "install_ui";;
+      8)
+        do_action "install_pgc_for_klipper" "install_ui";;
+      9)
+        do_action "install_MoonrakerTelegramBot" "install_ui";;
+      10)
+        do_action "install_mjpg-streamer" "install_ui";;
+      B|b)
+        clear; main_menu; break;;
+      *)
+        deny_action "install_ui";;
+    esac
+  done
+  install_menu
+}

scripts/ui/main_menu.sh

@@ -0,0 +1,92 @@
+main_ui(){
+  #[ $KIAUH_UPDATE_REMIND="true" ] && kiauh_update_reminder
+  top_border
+  echo -e "|     $(title_msg "~~~~~~~~~~~~~~~ [ Main Menu ] ~~~~~~~~~~~~~~~")     |"
+  hr
+  echo -e "|  0) [Upload Log]     |       Klipper: $KLIPPER_STATUS|"
+  echo -e "|                      |        Branch: ${cyan}$PRINT_BRANCH${default}|"
+  echo -e "|  1) [Install]        |                                |"
+  echo -e "|  2) [Update]         |     Moonraker: $MOONRAKER_STATUS|"
+  echo -e "|  3) [Remove]         |                                |"
+  echo -e "|  4) [Advanced]       |      Mainsail: $MAINSAIL_STATUS|"
+  echo -e "|  5) [Backup]         |        Fluidd: $FLUIDD_STATUS|"
+  echo -e "|                      | KlipperScreen: $KLIPPERSCREEN_STATUS|"
+  echo -e "|  6) [Settings]       |  Telegram Bot: $MOONRAKER_TELEGRAM_BOT_STATUS|"
+  echo -e "|                      |                                |"
+  echo -e "|                      |          DWC2: $DWC2_STATUS|"
+  echo -e "|  ${cyan}$KIAUH_VER${default}|     Octoprint: $OCTOPRINT_STATUS|"
+  quit_footer
+}
+
+print_kiauh_version(){
+  cd ${SRCDIR}/kiauh
+  KIAUH_VER=$(git describe HEAD --always --tags | cut -d "-" -f 1,2)
+  KIAUH_VER="$(printf "%-20s" "$KIAUH_VER")"
+}
+
+kiauh_update_dialog(){
+  kiauh_update_msg
+  read -p "${cyan}Do you want to update now? (Y/n):${default} " yn
+  while true; do
+    case "$yn" in
+    Y|y|Yes|yes|"")
+      do_action "update_kiauh"
+      break;;
+    N|n|No|no) break;;
+    *)
+      deny_action "kiauh_update_dialog";;
+    esac
+  done
+}
+
+main_menu(){
+  print_header
+  #print KIAUH update msg if update available
+    if [ "$KIAUH_UPDATE_AVAIL" = "true" ]; then
+      kiauh_update_dialog
+    fi
+  #check install status
+    print_kiauh_version
+    klipper_status
+    moonraker_status
+    dwc2_status
+    fluidd_status
+    mainsail_status
+    octoprint_status
+    klipperscreen_status
+    MoonrakerTelegramBot_status
+    print_branch
+  print_msg && clear_msg
+  main_ui
+  while true; do
+    read -p "${cyan}Perform action:${default} " action; echo
+    case "$action" in
+      "start klipper") do_action_service "start" "klipper"; main_ui;;
+      "stop klipper") do_action_service "stop" "klipper"; main_ui;;
+      "restart klipper") do_action_service "restart" "klipper"; main_ui;;
+      "start moonraker") do_action_service "start" "moonraker"; main_ui;;
+      "stop moonraker") do_action_service "stop" "moonraker"; main_ui;;
+      "restart moonraker")do_action_service "restart" "moonraker"; main_ui;;
+      "start dwc") do_action_service "start" "dwc"; main_ui;;
+      "stop dwc") do_action_service "stop" "dwc"; main_ui;;
+      "restart dwc") do_action_service "restart" "dwc"; main_ui;;
+      "start octoprint") do_action_service "start" "octoprint"; main_ui;;
+      "stop octoprint") do_action_service "stop" "octoprint"; main_ui;;
+      "restart octoprint") do_action_service "restart" "octoprint"; main_ui;;
+      update) do_action "update_kiauh" "main_ui";;
+      0) do_action "upload_selection" "main_ui";;
+      1) clear && install_menu && break;;
+      2) clear && update_menu && break;;
+      3) clear && remove_menu && break;;
+      4) clear && advanced_menu && break;;
+      5) clear && backup_menu && break;;
+      6) clear && settings_menu && break;;
+      Q|q)
+        echo -e "${green}###### Happy printing! ######${default}"; echo
+        exit -1;;
+      *)
+        deny_action "main_ui";;
+    esac
+  done
+  clear; main_menu
+}

scripts/ui/remove_menu.sh

@@ -0,0 +1,58 @@
+remove_ui(){
+  top_border
+  echo -e "|     ${red}~~~~~~~~~~~~~~ [ Remove Menu ] ~~~~~~~~~~~~~~${default}     | "
+  hr
+  echo -e "|  Directories which remain untouched:                  | "
+  echo -e "|  --> Your printer configuration directory             | "
+  echo -e "|  --> ~/kiauh-backups                                  | "
+  echo -e "|  You need remove them manually if you wish so.        | "
+  hr
+  echo -e "|  Firmware:                |  Touchscreen GUI:         | "
+  echo -e "|  1) [Klipper]             |  5) [KlipperScreen]       | "
+  echo -e "|                           |                           | "
+  echo -e "|  Klipper API:             |  Other:                   | "
+  echo -e "|  2) [Moonraker]           |  6) [Duet Web Control]    | "
+  echo -e "|                           |  7) [OctoPrint]           | "
+  echo -e "|  Klipper Webinterface:    |  8) [PrettyGCode]         | "
+  echo -e "|  3) [Mainsail]            |  9) [Telegram Bot]        | "
+  echo -e "|  4) [Fluidd]              |                           | "
+  echo -e "|                           |  10) [MJPG-Streamer]      | "
+  echo -e "|                           |  11) [NGINX]              | "
+  back_footer
+}
+
+remove_menu(){
+  do_action "" "remove_ui"
+  while true; do
+    read -p "${cyan}Perform action:${default} " action; echo
+    case "$action" in
+      1)
+        do_action "remove_klipper" "remove_ui";;
+      2)
+        do_action "remove_moonraker" "remove_ui";;
+      3)
+        do_action "remove_mainsail" "remove_ui";;
+      4)
+        do_action "remove_fluidd" "remove_ui";;
+      5)
+        do_action "remove_klipperscreen" "remove_ui";;
+      6)
+        do_action "remove_dwc2" "remove_ui";;
+      7)
+        do_action "remove_octoprint" "remove_ui";;
+      8)
+        do_action "remove_prettygcode" "remove_ui";;
+      9)
+        do_action "remove_MoonrakerTelegramBot" "remove_ui";;
+      10)
+        do_action "remove_mjpg-streamer" "remove_ui";;
+      11)
+        do_action "remove_nginx" "remove_ui";;
+      B|b)
+        clear; main_menu; break;;
+      *)
+        deny_action "remove_ui";;
+    esac
+  done
+  remove_menu
+}

scripts/ui/settings_menu.sh

@@ -0,0 +1,44 @@
+settings_ui(){
+  source_kiauh_ini
+  top_border
+  echo -e "|     $(title_msg "~~~~~~~~~~~~ [ KIAUH Settings ] ~~~~~~~~~~~~~")     | "
+  hr
+  echo -e "| ${red}Caution:${default}                                              | "
+  echo -e "| When you change the config folder, be aware that ALL  | "
+  echo -e "| Klipper and Moonraker services will be STOPPED,       | "
+  echo -e "| reconfigured and then restarted again.                | "
+  blank_line
+  echo -e "| ${red}DO NOT change the folder during printing!${default}             | "
+  hr
+  blank_line
+  echo -e "|  ${cyan}● Current Klipper config folder:${default}                     | "
+  printf "|%-55s|\n" "    $klipper_cfg_loc"
+  blank_line
+  hr
+  if [ -z $klipper_cfg_loc ]; then
+  echo -e "|  ${red}N/A) Install Klipper with KIAUH first to unlock!${default}     | "
+  else
+  echo -e "|  1) Change config folder                              | "
+  fi
+  back_footer
+}
+
+settings_menu(){
+  do_action "" "settings_ui"
+  while true; do
+    read -p "${cyan}Perform action:${default} " action; echo
+    case "$action" in
+      1)
+        if [ ! -z $klipper_cfg_loc ]; then
+          do_action "change_klipper_cfg_path" "settings_ui"
+        else
+          deny_action "settings_ui"
+        fi;;
+      B|b)
+        clear; main_menu; break;;
+      *)
+        deny_action "settings_ui";;
+    esac
+  done
+  settings_ui
+}

scripts/ui/update_menu.sh

@@ -0,0 +1,68 @@
+update_ui(){
+  ui_print_versions
+  top_border
+  echo -e "|     ${green}~~~~~~~~~~~~~~ [ Update Menu ] ~~~~~~~~~~~~~~${default}     | "
+  hr
+  echo -e "|  0) $BB4U_STATUS| "
+  hr
+  echo -e "|  a) [Update all]       |               |              | "
+  echo -e "|                        |  Local Vers:  | Remote Vers: | "
+  echo -e "|  Klipper/Klipper API:  |---------------|--------------| "
+  echo -e "|  1) [Klipper]          |  $LOCAL_COMMIT | $REMOTE_COMMIT | "
+  echo -e "|  2) [Moonraker]        |  $LOCAL_MOONRAKER_COMMIT | $REMOTE_MOONRAKER_COMMIT | "
+  echo -e "|                        |               |              | "
+  echo -e "|  Klipper Webinterface: |---------------|--------------| "
+  echo -e "|  3) [Mainsail]         |  $MAINSAIL_LOCAL_VER | $MAINSAIL_REMOTE_VER | "
+  echo -e "|  4) [Fluidd]           |  $FLUIDD_LOCAL_VER | $FLUIDD_REMOTE_VER | "
+  echo -e "|                        |               |              | "
+  echo -e "|  Touchscreen GUI:      |---------------|--------------| "
+  echo -e "|  5) [KlipperScreen]    |  $LOCAL_KLIPPERSCREEN_COMMIT | $REMOTE_KLIPPERSCREEN_COMMIT | "
+  echo -e "|                        |               |              | "
+  echo -e "|  Other:                |---------------|--------------| "
+  echo -e "|  6) [DWC2-for-Klipper] |  $LOCAL_DWC2FK_COMMIT | $REMOTE_DWC2FK_COMMIT | "
+  echo -e "|  7) [DWC2 Web UI]      |  $DWC2_LOCAL_VER | $DWC2_REMOTE_VER | "
+  echo -e "|  8) [PrettyGCode]      |  $LOCAL_PGC_COMMIT | $REMOTE_PGC_COMMIT | "
+  echo -e "|  9) [Telegram Bot]     |  $LOCAL_MOONRAKER_TELEGRAM_BOT_COMMIT | $REMOTE_MOONRAKER_TELEGRAM_BOT_COMMIT | "
+  echo -e "|                        |------------------------------| "
+  echo -e "|  10) [System]          |  $DISPLAY_SYS_UPDATE   | "
+  back_footer
+}
+
+update_menu(){
+  read_bb4u_stat
+  do_action "" "update_ui"
+  while true; do
+    read -p "${cyan}Perform action:${default} " action; echo
+    case "$action" in
+      0)
+        do_action "toggle_backups" "update_ui";;
+      1)
+        do_action "update_klipper" "update_ui";;
+      2)
+        do_action "update_moonraker" "update_ui";;
+      3)
+        do_action "update_mainsail" "update_ui";;
+      4)
+        do_action "update_fluidd" "update_ui";;
+      5)
+        do_action "update_klipperscreen" "update_ui";;
+      6)
+        do_action "update_dwc2fk" "update_ui";;
+      7)
+        do_action "update_dwc2" "update_ui";;
+      8)
+        do_action "update_pgc_for_klipper" "update_ui";;
+      9)
+        do_action "update_MoonrakerTelegramBot" "update_ui";;
+      10)
+        do_action "update_system" "update_ui";;
+      a)
+        do_action "update_all" "update_ui";;
+      B|b)
+        clear; main_menu; break;;
+      *)
+        deny_action "update_ui";;
+    esac
+  done
+  update_menu
+}

scripts/update.sh

@@ -1,77 +1,341 @@
-#TODO
-# - update the correct branch
-# - version checks before updating
+update_kiauh(){
+  if [ "$KIAUH_UPDATE_AVAIL" = "true" ]; then
+    status_msg "Updating KIAUH ..."
+    cd ${SRCDIR}/kiauh
+    ### force reset kiauh before updating
+    git reset --hard
+    git pull && ok_msg "Update complete! Please restart KIAUH."
+    exit -1
+  fi
+}
 
-#WIP
-update_check(){
-  read_local_commit
-  read_remote_commit
+update_all(){
+  while true; do
+    if [ "${#update_arr[@]}" = "0" ]; then
+      CONFIRM_MSG="Everything is already up to date!"
+      echo; break
+    fi
+    echo
+    top_border
+    echo -e "|  The following installations will be updated:         |"
+    if [ "$KLIPPER_UPDATE_AVAIL" = "true" ]; then
+      echo -e "|  ${cyan}● Klipper${default}                                            |"
+    fi
+    if [ "$DWC2FK_UPDATE_AVAIL" = "true" ]; then
+      echo -e "|  ${cyan}● DWC2-for-Klipper-Socket${default}                            |"
+    fi
+    if [ "$DWC2_UPDATE_AVAIL" = "true" ]; then
+      echo -e "|  ${cyan}● Duet Web Control${default}                                   |"
+    fi
+    if [ "$MOONRAKER_UPDATE_AVAIL" = "true" ]; then
+      echo -e "|  ${cyan}● Moonraker${default}                                          |"
+    fi
+    if [ "$MAINSAIL_UPDATE_AVAIL" = "true" ]; then
+      echo -e "|  ${cyan}● Mainsail${default}                                           |"
+    fi
+    if [ "$FLUIDD_UPDATE_AVAIL" = "true" ]; then
+      echo -e "|  ${cyan}● Fluidd${default}                                             |"
+    fi
+    if [ "$KLIPPERSCREEN_UPDATE_AVAIL" = "true" ]; then
+      echo -e "|  ${cyan}● KlipperScreen${default}                                      |"
+    fi
+    if [ "$PGC_UPDATE_AVAIL" = "true" ]; then
+      echo -e "|  ${cyan}● PrettyGCode for Klipper${default}                            |"
+    fi
+    if [ "$MOONRAKER_TELEGRAM_BOT_UPDATE_AVAIL" = "true" ]; then
+      echo -e "|  ${cyan}● MoonrakerTelegramBot${default}                               |"
+    fi
+    if [ "$SYS_UPDATE_AVAIL" = "true" ]; then
+      echo -e "|  ${cyan}● System${default}                                             |"
+    fi
+    bottom_border
+    if [ "${#update_arr[@]}" != "0" ]; then
+      read -p "${cyan}###### Do you want to proceed? (Y/n):${default} " yn
+      case "$yn" in
+        Y|y|Yes|yes|"")
+          for update in ${update_arr[@]}
+          do
+            $update
+          done
+          break;;
+        N|n|No|no)
+          break;;
+        *)
+          print_unkown_cmd
+          print_msg && clear_msg;;
+      esac
+    fi
+  done
+}
+
+update_log_paths(){
+  ### update services to make use of moonrakers new log_path option
+  ### https://github.com/Arksine/moonraker/commit/829b3a4ee80579af35dd64a37ccc092a1f67682a
+  shopt -s extglob # enable extended globbing
+  source_kiauh_ini
+  LPATH="${HOME}/klipper_logs"
+  [ ! -d "$LPATH" ] && mkdir -p "$LPATH"
+  FILE="$SYSTEMDDIR/$1?(-*([0-9])).service"
+  for file in $(ls $FILE); do
+    [ "$1" == "klipper" ] && LOG="klippy"
+    [ "$1" == "moonraker" ] && LOG="moonraker"
+    if [ ! "$(grep "\-l" $file)" ]; then
+      status_msg "Updating $file ..."
+      sudo sed -i -r "/ExecStart=/ s|$| -l $LPATH/$LOG.log|" $file
+      ok_msg "$file updated!"
+    elif [ "$(grep "\-l \/tmp\/$LOG" $file)" ]; then
+      status_msg "Updating $file ..."
+      sudo sed -i -r "/ExecStart=/ s|-l \/tmp\/$LOG|-l $LPATH/$LOG|" $file
+      ok_msg "$file updated!"
+    fi
+  done
+  sudo systemctl daemon-reload
+
+  # patch log_path entry if not found
+  dir1="$klipper_cfg_loc"
+  dir2="$klipper_cfg_loc/printer_*"
+  for conf in $(find $dir1 $dir2 -name "moonraker.conf" 2> /dev/null); do
+    if ! grep -q "log_path" $conf; then
+      status_msg "Patching $conf"
+      sed -i "/^config_path/a log_path: $LPATH" $conf
+      ok_msg "OK!"
+    fi
+  done
+
+  # create symlink for mainsail and fluidd nginx logs
+  symlink_webui_nginx_log "mainsail"
+  symlink_webui_nginx_log "fluidd"
+
+  # create symlink for webcamd log
+  if [ -f "/var/log/webcamd.log" ] && [ ! -L "$LPATH/webcamd.log" ]; then
+    status_msg "Creating symlink for '/var/log/webcamd.log' ..."
+    ln -s "/var/log/webcamd.log" "$LPATH"
+    ok_msg "OK!"
+  fi
+
+  shopt -u extglob # disable extended globbing
+}
+
+migrate_custompios(){
+  ### migrate vanilla mainsailOS 0.4.0 / fluiddPI v1.13.0
+  ### and older to be in sync with newer releases
+  WEBCAMD_SRC="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/mjpgstreamer/filesystem/root/usr/local/bin/webcamd"
+  MJPG_SERV_SRC="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/mjpgstreamer/filesystem/root/etc/systemd/system/webcamd.service"
+  KL_SERV_SRC="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/klipper/filesystem/root/etc/systemd/system/klipper.service"
+  NGINX_CFG1="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/mainsail/filesystem/root/etc/nginx/conf.d/upstreams.conf"
+  NGINX_CFG2="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/mainsail/filesystem/root/etc/nginx/sites-available/mainsail"
+  LOG_ROTATE_KLIPPER="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/klipper/filesystem/root/etc/logrotate.d/klipper"
+  LOG_ROTATE_MOONRAKER="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/moonraker/filesystem/root/etc/logrotate.d/moonraker"
+  LOG_ROTATE_WEBCAMD="https://raw.githubusercontent.com/raymondh2/MainsailOS/master/src/modules/mjpgstreamer/filesystem/root/etc/logrotate.d/webcamd"
+
+  if [ "$1" == "mainsail" ]; then
+    OS_VER="MainsailOS"
+    MACRO_CFG="mainsail.cfg"
+  fi
+  if [ "$1" == "fluiddpi" ]; then
+    OS_VER="FluiddPi"
+    MACRO_CFG="client_macros.cfg"
+  fi
+  if [ ! -f "/boot/$1.txt" ] || [ ! -f "/etc/init.d/klipper" ]; then
+    # abort function if there is no sign of an old CustomPiOS anymore
+    ERROR_MSG="No vanilla $OS_VER found. Aborting..." && return 0
+  fi
+  status_msg "Starting migration of $OS_VER... Please wait..."
+  if [ -d "${HOME}/klipper_logs" ]; then
+    # delete an existing klipper_logs directory
+    # shouldn't be there in the first place if its a true vanilla CustomPiOS
+    status_msg "Recreate '~/klipper_logs' directory..."
+    rm -rf "${HOME}/klipper_logs" && mkdir "${HOME}/klipper_logs"
+    ok_msg "OK!"
+  fi
+  if [ -f "/boot/$1.txt" ]; then
+    # replace old webcamd.service and webcamd
+    status_msg "Migrating MJPG-Streamer..."
+    sudo systemctl stop webcamd
+    sudo rm -f "/etc/systemd/system/webcamd.service"
+    sudo rm -f "/root/bin/webcamd"
+    sudo wget $WEBCAMD_SRC -O "/usr/local/bin/webcamd"
+    sudo wget $MJPG_SERV_SRC -O "/etc/systemd/system/webcamd.service"
+    sudo sed -i "s/MainsailOS/$OS_VER/" "/etc/systemd/system/webcamd.service"
+    sudo chmod +x "/usr/local/bin/webcamd"
+    # move mainsail.txt/fluiddpi.txt from boot to klipper_config and rename it
+    sudo mv "/boot/$1.txt" "${HOME}/klipper_config/webcam.txt"
+    sudo chown pi:pi "${HOME}/klipper_config/webcam.txt"
+    sudo systemctl daemon-reload
+    sudo systemctl restart webcamd
+    ok_msg "OK!"
+  fi
+  if [ -f "/etc/init.d/klipper" ] && [ ! -f "/etc/systemd/system/klipper.service" ]; then
+    # replace klipper SysVinit service with systemd service
+    status_msg "Migrating Klipper Service..."
+    sudo systemctl stop klipper
+    sudo update-rc.d -f klipper remove
+    sudo rm -f "/etc/init.d/klipper"
+    sudo rm -f "/etc/default/klipper"
+    sudo wget $KL_SERV_SRC -O "/etc/systemd/system/klipper.service"
+    sudo systemctl enable klipper.service
+    sudo systemctl daemon-reload
+    sudo systemctl restart klipper
+    ok_msg "OK!"
+  fi
+  if [ -f "/etc/systemd/system/moonraker.service" ]; then
+    # update new log path in existing moonraker service
+    status_msg "Updating Moonraker Service..."
+    sudo systemctl stop moonraker
+    update_log_paths "moonraker"
+    sudo systemctl restart moonraker
+    ok_msg "OK!"
+  fi
+  if [ -f "/etc/nginx/conf.d/upstreams.conf" ]; then
+    [ "$1" == "mainsail" ] && cfg="mainsail"
+    [ "$1" == "fluiddpi" ] && cfg="fluidd"
+    # update nginx upstreams.conf and mainsail/fluidd config file
+    status_msg "Updating NGINX configurations..."
+    sudo systemctl stop nginx
+    sudo rm -f "/etc/nginx/conf.d/upstreams.conf"
+    sudo rm -f "/etc/nginx/sites-available/$cfg"
+    sudo wget $NGINX_CFG1 -O "/etc/nginx/conf.d/upstreams.conf"
+    sudo wget $NGINX_CFG2 -O "/etc/nginx/sites-available/$cfg"
+    sudo sed -i "s/mainsail/$cfg/g" "/etc/nginx/sites-available/$cfg"
+    sudo systemctl restart nginx
+    ok_msg "OK!"
+  fi
+  if [ -f "${HOME}/klipper_config/$MACRO_CFG" ]; then
+    # update macro files
+    status_msg "Updating $MACRO_CFG ..."
+    MACRO_CFG_PATH="${HOME}/klipper_config/$MACRO_CFG"
+    sed -i "/SAVE_GCODE_STATE NAME=PAUSE_state/d" $MACRO_CFG_PATH
+    sed -i "/RESTORE_GCODE_STATE NAME=PAUSE_state/d" $MACRO_CFG_PATH
+    ok_msg "OK!"
+  fi
+  if [ -d "/etc/logrotate.d" ]; then
+    # download logrotate configs
+    status_msg "Setting up logrotations..."
+    sudo wget $LOG_ROTATE_KLIPPER -O "/etc/logrotate.d/klipper"
+    sudo wget $LOG_ROTATE_MOONRAKER -O "/etc/logrotate.d/moonraker"
+    sudo wget $LOG_ROTATE_WEBCAMD -O "/etc/logrotate.d/webcamd"
+    ok_msg "OK!"
+  fi
+  ok_msg "Migration done!"
 }
 
 update_klipper(){
-  stop_klipper
-  bb4u_klipper
+  do_action_service "stop" "klipper"
   if [ ! -d $KLIPPER_DIR ]; then
     cd ${HOME} && git clone $KLIPPER_REPO
   else
+    bb4u "klipper"
     read_branch
+    save_klipper_state
     status_msg "Updating $GET_BRANCH"
-    #fetching origin/master -> error
-    #rewriting origin/master to origin
-    if [ "$GET_BRANCH" == "origin/master" ]; then
-      FETCH_BRANCH="origin"
-    else
-      FETCH_BRANCH=$(echo "$GET_BRANCH" | cut -d "/" -f1)
+    cd $KLIPPER_DIR
+    if [ "$DETACHED_HEAD" == "true" ]; then
+      git checkout $GET_BRANCH
+      unset DETACHED_HEAD
     fi
-    status_msg "Fetching from $FETCH_BRANCH"
-    git fetch $FETCH_BRANCH -q && ok_msg "Fetch successfull!"
-    status_msg "Checking out $GET_BRANCH"
-    git checkout $GET_BRANCH -q && ok_msg "Checkout successfull!" && echo; ok_msg "Update complete!"
+    ### pull latest files from github
+    git pull
+    ### read PKGLIST and install possible new dependencies
+    install_klipper_packages
+    ### install possible new python dependencies
+    KLIPPER_REQ_TXT="$KLIPPER_DIR/scripts/klippy-requirements.txt"
+    $KLIPPY_ENV/bin/pip install -r $KLIPPER_REQ_TXT
   fi
-  start_klipper; echo
+  update_log_paths "klipper"
+  ok_msg "Update complete!"
+  do_action_service "restart" "klipper"
 }
 
 update_dwc2fk(){
-  stop_klipper
-  bb4u_dwc2fk
+  do_action_service "stop" "dwc"
+  bb4u "dwc2"
   if [ ! -d $DWC2FK_DIR ]; then
     cd ${HOME} && git clone $DWC2FK_REPO
   else
     cd $DWC2FK_DIR && git pull
-    #create a web_dwc2.py symlink if not already existing
-    if [ -d $KLIPPER_DIR/klippy/extras ] && [ ! -e $WEB_DWC2 ]; then
-      status_msg "Creating web_dwc2.py symlink ..."
-      ln -s $DWC2FK_DIR/web_dwc2.py $WEB_DWC2 && ok_msg "Symlink created!"
-    fi
   fi
-  start_klipper
+  do_action_service "start" "dwc"
 }
 
 update_dwc2(){
-  bb4u_dwc2
-  #check dependencies
-  dep=(wget gzip tar curl)
-  dep_check
-  #execute operation
-  GET_DWC2_URL=`curl -s https://api.github.com/repositories/28820678/releases/latest | grep browser_download_url | cut -d'"' -f4`
-  if [ ! -d $DWC2_DIR/web ]; then
-    mkdir -p $DWC2_DIR/web
-  fi
-  cd $DWC2_DIR/web
-  status_msg "Downloading DWC2 Web UI ..."
-  wget -q $GET_DWC2_URL && ok_msg "Download complete!"
-  status_msg "Unzipping archive ..."
-  unzip -q -o *.zip && for f_ in $(find . | grep '.gz');do gunzip -f ${f_};done && ok_msg "Done!"
-  status_msg "Writing version to file ..."
-  echo $GET_DWC2_URL | cut -d/ -f8 > $DWC2_DIR/web/version && ok_msg "Done!"
-  status_msg "Do a little cleanup ..."
-  rm -rf DuetWebControl-SD.zip && ok_msg "Done!"
+  bb4u "dwc2"
+  download_dwc_webui
 }
 
 update_mainsail(){
-  stop_klipper
-  bb4u_mainsail
+  bb4u "mainsail"
   status_msg "Updating Mainsail ..."
-  install_mainsail
-  start_klipper
+  mainsail_setup
+  match_nginx_configs
+  symlink_webui_nginx_log "mainsail"
+}
+
+update_fluidd(){
+  bb4u "fluidd"
+  status_msg "Updating Fluidd ..."
+  fluidd_setup
+  match_nginx_configs
+  symlink_webui_nginx_log "fluidd"
+}
+
+update_moonraker(){
+  do_action_service "stop" "moonraker"
+  bb4u "moonraker"
+  status_msg "Updating Moonraker ..."
+  ### pull latest files from github
+  cd "$MOONRAKER_DIR" && git pull
+  ### read PKGLIST and install possible new dependencies
+  install_moonraker_packages
+  ### install possible new python dependencies
+  MR_REQ_TXT="$MOONRAKER_DIR/scripts/moonraker-requirements.txt"
+  "$MOONRAKER_ENV"/bin/pip install -r "$MR_REQ_TXT"
+  update_log_paths "moonraker"
+
+  ### required due to https://github.com/Arksine/moonraker/issues/349
+  moonraker_polkit
+
+  ok_msg "Update complete!"
+  do_action_service "restart" "moonraker"
+}
+
+update_klipperscreen(){
+  stop_klipperscreen
+  cd $KLIPPERSCREEN_DIR
+  KLIPPERSCREEN_OLDREQ_MD5SUM=$(md5sum $KLIPPERSCREEN_DIR/scripts/KlipperScreen-requirements.txt | cut -d " " -f1)
+  git pull origin master -q && ok_msg "Fetch successfull!"
+  git checkout -f master && ok_msg "Checkout successfull"
+  #KLIPPERSCREEN_NEWREQ_MD5SUM=$(md5sum $KLIPPERSCREEN_DIR/scripts/KlipperScreen-requirements.txt)
+  if [[ $(md5sum $KLIPPERSCREEN_DIR/scripts/KlipperScreen-requirements.txt | cut -d " " -f1) != $KLIPPERSCREEN_OLDREQ_MD5SUM ]]; then
+    status_msg "New dependecies detected..."
+    PYTHONDIR="${HOME}/.KlipperScreen-env"
+    $PYTHONDIR/bin/pip install -r $KLIPPERSCREEN_DIR/scripts/KlipperScreen-requirements.txt
+    ok_msg "Dependencies have been installed!"
+  fi
+  ok_msg "Update complete!"
+  start_klipperscreen
+}
+
+update_pgc_for_klipper(){
+  PGC_DIR="${HOME}/pgcode"
+  status_msg "Updating PrettyGCode for Klipper ..."
+  cd $PGC_DIR && git pull
+  ok_msg "Update complete!"
+}
+
+update_MoonrakerTelegramBot(){
+  source_kiauh_ini
+  export klipper_cfg_loc
+  stop_MoonrakerTelegramBot
+  cd $MOONRAKER_TELEGRAM_BOT_DIR
+  git pull
+  ./scripts/install.sh
+  ok_msg "Update complete!"
+  start_MoonrakerTelegramBot
+}
+
+update_system(){
+  status_msg "Updating System ..."
+  sudo apt-get update --allow-releaseinfo-change && sudo apt-get upgrade -y
+  CONFIRM_MSG="Update complete! Check the log above!\n ${yellow}KIAUH will not install any dist-upgrades or\n any packages which have been kept back!${green}"
+  print_msg && clear_msg
 }

scripts/upload_log.sh

@@ -0,0 +1,104 @@
+accept_upload_conditions(){
+  while true; do
+    top_border
+    echo -e "|     ${red}~~~~~~~~~~~ [ Upload Agreement ] ~~~~~~~~~~~~${default}     |"
+    hr
+    echo -e "| The following function will help to quickly upload    |"
+    echo -e "| logs for debugging purposes. With confirming this     |"
+    echo -e "| dialog, you agree that during that process your logs  |"
+    echo -e "| will be uploaded to: ${yellow}http://paste.c-net.org/${default}          |"
+    hr
+    echo -e "| ${red}PLEASE NOTE:${default}                                          |"
+    echo -e "| Be aware that logs can contain network information,   |"
+    echo -e "| private data like usernames, filenames, or other      |"
+    echo -e "| information you may not want to make public.          |"
+    blank_line
+    echo -e "| Do ${red}NOT${default} use this function if you don't agree!          |"
+    bottom_border
+    read -p "${cyan}Do you accept? (Y/n):${default} " yn
+    case "$yn" in
+      Y|y|Yes|yes|"")
+        sed -i "/logupload_accepted=/s/false/true/" $INI_FILE
+        clear && print_header && upload_selection
+        ;;
+      N|n|No|no)
+        clear
+        main_menu
+        break
+        ;;
+      *)
+        clear
+        print_header
+        print_unkown_cmd
+        print_msg && clear_msg
+        accept_upload_conditions;;
+    esac
+  done
+}
+
+upload_selection(){
+  source_kiauh_ini
+  [ "$logupload_accepted" = "false" ] && accept_upload_conditions
+
+  ### find all suitable logfiles for klipper
+  logfiles=()
+  klipper_logs="${HOME}/klipper_logs/klippy*.log"
+  moonraker_logs="${HOME}/klipper_logs/moonraker*.log"
+
+  if ls $klipper_logs 2>/dev/null 1>&2; then
+    for kl_log in $(find $klipper_logs); do
+      logfiles+=($kl_log)
+    done
+  fi
+  if ls $moonraker_logs 2>/dev/null 1>&2; then
+    for mr_log in $(find $moonraker_logs); do
+      logfiles+=($mr_log)
+    done
+  fi
+  if ls /tmp/dwc2*.log 2>/dev/null 1>&2; then
+    for dwc_log in $(find /tmp/dwc2*.log); do
+      logfiles+=($dwc_log)
+    done
+  fi
+
+  ### draw interface
+  i=0
+  top_border
+  echo -e "|     ${yellow}~~~~~~~~~~~~~~~ [ Log Upload ] ~~~~~~~~~~~~~~${default}     |"
+  hr
+  echo -e "|  You can choose the following files for uploading:    |"
+  for log in ${logfiles[@]}; do
+    printf "|  $i) %-50s|\n" "${logfiles[$i]}"
+    i=$((i + 1))
+  done
+  back_footer
+  while true; do
+    read -p "${cyan}Please select:${default} " choice
+    if [ $choice = "b" ] || [ $choice = "B" ]; then
+      clear && main_menu && break
+    elif [ $choice -le ${#logfiles[@]} ]; then
+      upload_log "${logfiles[$choice]}"
+      upload_selection
+    else
+      clear && print_header
+      ERROR_MSG="File not found!" && print_msg && clear_msg
+      upload_selection
+    fi
+  done
+}
+
+upload_log(){
+  if [ -f "$1" ]; then
+    clear && print_header
+    status_msg "Uploading $1 ..."
+    LINK=$(curl -s --upload-file $1 'http://paste.c-net.org/')
+    [ ! -z "$LINK" ] && ok_msg "$1 upload successfull!"
+    echo -e "\n${cyan}###### Here is your link:${default}"
+    echo -e ">>>>>> $LINK\n"
+    unset LINK
+  else
+    clear && print_header
+    ERROR_MSG="File not found!" && print_msg && clear_msg
+    upload_selection
+  fi
+}