Release v6.0.0-alpha.13

Merge develop into master (Release v6.0.0-alpha.13)

README.md

@@ -28,12 +28,12 @@
 
 ### 📋 Prerequisites
 KIAUH is a script that assists you in installing Klipper on a Linux operating system that has
-already been flashed to your Raspberry Pi's (or other SBC's) SD card. As a result, you must ensure 
-that you have a functional Linux system on hand. `Raspberry Pi OS Lite (either 32bit or 64bit)` is a recommended Linux image 
-if you are using a Raspberry Pi. The [official Raspberry Pi Imager](https://www.raspberrypi.com/software/) 
+already been flashed to your Raspberry Pi's (or other SBC's) SD card. As a result, you must ensure
+that you have a functional Linux system on hand. `Raspberry Pi OS Lite (either 32bit or 64bit)` is a recommended Linux image
+if you are using a Raspberry Pi. The [official Raspberry Pi Imager](https://www.raspberrypi.com/software/)
 is the simplest way to flash an image like this to an SD card.
 
-* Once you have downloaded, installed and launched the Raspberry Pi Imager, 
+* Once you have downloaded, installed and launched the Raspberry Pi Imager,
 select `Choose OS -> Raspberry Pi OS (other)`: \
 <p align="center">
   <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/rpi_imager1.png" alt="KIAUH logo" height="350">
@@ -44,7 +44,7 @@ select `Choose OS -> Raspberry Pi OS (other)`: \
   <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/rpi_imager2.png" alt="KIAUH logo" height="350">
 </p>
 
-* Back in the Raspberry Pi Imager's main menu, select the corresponding SD card to which 
+* Back in the Raspberry Pi Imager's main menu, select the corresponding SD card to which
 you want to flash the image.
 
 * Make sure to go into the Advanced Option (the cog icon in the lower left corner of the main menu)
@@ -52,9 +52,9 @@ and enable SSH and configure Wi-Fi.
 
 * If you need more help for using the Raspberry Pi Imager, please visit the [official documentation](https://www.raspberrypi.com/documentation/computers/getting-started.html).
 
-These steps **only** apply if you are actually using a Raspberry Pi. In case you want 
-to use a different SBC (like an Orange Pi or any other Pi derivates), please look up on how to get an appropriate Linux image flashed 
-to the SD card before proceeding further (usually done with Balena Etcher in those cases). Also make sure that KIAUH will be able to run 
+These steps **only** apply if you are actually using a Raspberry Pi. In case you want
+to use a different SBC (like an Orange Pi or any other Pi derivates), please look up on how to get an appropriate Linux image flashed
+to the SD card before proceeding further (usually done with Balena Etcher in those cases). Also make sure that KIAUH will be able to run
 and operate on the Linux Distribution you are going to flash. You likely will have the most success with
 distributions based on Debian 11 Bullseye. Read the notes further down below in this document.
 
@@ -82,8 +82,8 @@ Finally, start KIAUH by running the next command:
 ```
 
 * **Step 4:** \
-You should now find yourself in the main menu of KIAUH. You will see several actions to choose from depending 
-on what you want to do. To choose an action, simply type the corresponding number into the "Perform action" 
+You should now find yourself in the main menu of KIAUH. You will see several actions to choose from depending
+on what you want to do. To choose an action, simply type the corresponding number into the "Perform action"
 prompt and confirm by hitting ENTER.
 
 <hr>
@@ -101,77 +101,83 @@ prompt and confirm by hitting ENTER.
 
 <h2 align="center">🌐 Sources & Further Information</h2>
 
-<table>
+<table align="center">
 <tr>
-<th><h3><a href="https://github.com/Klipper3d/klipper">Klipper</a></h3></th>
-<th><h3><a href="https://github.com/Arksine/moonraker">Moonraker</a></h3></th>
-<th><h3><a href="https://github.com/mainsail-crew/mainsail">Mainsail</a></h3></th>
+    <th><h3><a href="https://github.com/Klipper3d/klipper">Klipper</a></h3></th>
+    <th><h3><a href="https://github.com/Arksine/moonraker">Moonraker</a></h3></th>
+    <th><h3><a href="https://github.com/mainsail-crew/mainsail">Mainsail</a></h3></th>
 </tr>
 <tr>
-<th><img src="https://raw.githubusercontent.com/Klipper3d/klipper/master/docs/img/klipper-logo.png" alt="Klipper Logo" height="64"></th>
-<th><img src="https://avatars.githubusercontent.com/u/9563098?v=4" alt="Arksine avatar" height="64"></th>
-<th><img src="https://raw.githubusercontent.com/mainsail-crew/docs/master/assets/img/logo.png" alt="Mainsail Logo" height="64"></th>
+    <th><img src="https://raw.githubusercontent.com/Klipper3d/klipper/master/docs/img/klipper-logo.png" alt="Klipper Logo" height="64"></th>
+    <th><img src="https://avatars.githubusercontent.com/u/9563098?v=4" alt="Arksine avatar" height="64"></th>
+    <th><img src="https://raw.githubusercontent.com/mainsail-crew/docs/master/assets/img/logo.png" alt="Mainsail Logo" height="64"></th>
 </tr>
 <tr>
-<th>by <a href="https://github.com/KevinOConnor">KevinOConnor</a></th>
-<th>by <a href="https://github.com/Arksine">Arksine</a></th>
-<th>by <a href="https://github.com/mainsail-crew">mainsail-crew</a></th>
-</tr>
-<tr>
-<th><h3><a href="https://github.com/fluidd-core/fluidd">Fluidd</a></h3></th>
-<th><h3><a href="https://github.com/jordanruthe/KlipperScreen">KlipperScreen</a></h3></th>
-<th><h3><a href="https://github.com/OctoPrint/OctoPrint">OctoPrint</a></h3></th>
-</tr>
-<tr>
-<th><img src="https://raw.githubusercontent.com/fluidd-core/fluidd/master/docs/assets/images/logo.svg" alt="Fluidd Logo" height="64"></th>
-<th><img src="https://avatars.githubusercontent.com/u/31575189?v=4" alt="jordanruthe avatar" height="64"></th>
-<th><img src="https://raw.githubusercontent.com/OctoPrint/OctoPrint/master/docs/images/octoprint-logo.png" alt="OctoPrint Logo" height="64"></th>
-</tr>
-<tr>
-<th>by <a href="https://github.com/fluidd-core">fluidd-core</a></th>
-<th>by <a href="https://github.com/jordanruthe">jordanruthe</a></th>
-<th>by <a href="https://github.com/OctoPrint">OctoPrint</a></th>
+    <th>by <a href="https://github.com/KevinOConnor">KevinOConnor</a></th>
+    <th>by <a href="https://github.com/Arksine">Arksine</a></th>
+    <th>by <a href="https://github.com/mainsail-crew">mainsail-crew</a></th>
 </tr>
 
 <tr>
-<th><h3><a href="https://github.com/nlef/moonraker-telegram-bot">Moonraker-Telegram-Bot</a></h3></th>
-<th><h3><a href="https://github.com/Kragrathea/pgcode">PrettyGCode for Klipper</a></h3></th>
-<th><h3><a href="https://github.com/TheSpaghettiDetective/moonraker-obico">Obico for Klipper</a></h3></th>
+    <th><h3><a href="https://github.com/fluidd-core/fluidd">Fluidd</a></h3></th>
+    <th><h3><a href="https://github.com/jordanruthe/KlipperScreen">KlipperScreen</a></h3></th>
+    <th><h3><a href="https://github.com/OctoPrint/OctoPrint">OctoPrint</a></h3></th>
+</tr>
+<tr>
+    <th><img src="https://raw.githubusercontent.com/fluidd-core/fluidd/master/docs/assets/images/logo.svg" alt="Fluidd Logo" height="64"></th>
+    <th><img src="https://avatars.githubusercontent.com/u/31575189?v=4" alt="jordanruthe avatar" height="64"></th>
+    <th><img src="https://raw.githubusercontent.com/OctoPrint/OctoPrint/master/docs/images/octoprint-logo.png" alt="OctoPrint Logo" height="64"></th>
+</tr>
+<tr>
+    <th>by <a href="https://github.com/fluidd-core">fluidd-core</a></th>
+    <th>by <a href="https://github.com/jordanruthe">jordanruthe</a></th>
+    <th>by <a href="https://github.com/OctoPrint">OctoPrint</a></th>
 </tr>
 
 <tr>
-<th><img src="https://avatars.githubusercontent.com/u/52351624?v=4" alt="nlef avatar" height="64"></th>
-<th><img src="https://avatars.githubusercontent.com/u/5917231?v=4" alt="Kragrathea avatar" height="64"></th>
-<th><img src="https://avatars.githubusercontent.com/u/46323662?s=200&v=4" alt="Obico logo" height="64"></th>
+    <th><h3><a href="https://github.com/nlef/moonraker-telegram-bot">Moonraker-Telegram-Bot</a></h3></th>
+    <th><h3><a href="https://github.com/Kragrathea/pgcode">PrettyGCode for Klipper</a></h3></th>
+    <th><h3><a href="https://github.com/TheSpaghettiDetective/moonraker-obico">Obico for Klipper</a></h3></th>
+</tr>
+<tr>
+    <th><img src="https://avatars.githubusercontent.com/u/52351624?v=4" alt="nlef avatar" height="64"></th>
+    <th><img src="https://avatars.githubusercontent.com/u/5917231?v=4" alt="Kragrathea avatar" height="64"></th>
+    <th><img src="https://avatars.githubusercontent.com/u/46323662?s=200&v=4" alt="Obico logo" height="64"></th>
+</tr>
+<tr>
+    <th>by <a href="https://github.com/nlef">nlef</a></th>
+    <th>by <a href="https://github.com/Kragrathea">Kragrathea</a></th>
+    <th>by <a href="https://github.com/TheSpaghettiDetective">Obico</a></th>
 </tr>
 
 <tr>
-<th>by <a href="https://github.com/nlef">nlef</a></th>
-<th>by <a href="https://github.com/Kragrathea">Kragrathea</a></th>
-<th>by <a href="https://github.com/TheSpaghettiDetective">Obico</a></th>
+    <th><h3><a href="https://github.com/Clon1998/mobileraker_companion">Mobileraker's Companion</a></h3></th>
+    <th><h3><a href="https://octoeverywhere.com/?source=kiauh_readme">OctoEverywhere For Klipper</a></h3></th>
+    <th><h3><a href="https://github.com/crysxd/OctoApp-Plugin">OctoApp For Klipper</a></h3></th>
+</tr>
+<tr>
+    <th><a href="https://github.com/Clon1998/mobileraker_companion"><img src="https://raw.githubusercontent.com/Clon1998/mobileraker/master/assets/icon/mr_appicon.png" alt="Mobileraker Logo" height="64"></a></th>
+    <th><a href="https://octoeverywhere.com/?source=kiauh_readme"><img src="https://octoeverywhere.com/img/logo.svg" alt="OctoEverywhere Logo" height="64"></a></th>
+    <th><a href="https://octoapp.eu/?source=kiauh_readme"><img src="https://octoapp.eu/octoapp.webp" alt="OctoApp Logo" height="64"></a></th>
+</tr>
+<tr>
+    <th>by <a href="https://github.com/Clon1998">Patrick Schmidt</a></th>
+    <th>by <a href="https://github.com/QuinnDamerell">Quinn Damerell</a></th>
+    <th>by <a href="https://github.com/crysxd">Christian Würthner</a></th>
 </tr>
 
 <tr>
-<th><h3><a href="https://github.com/Clon1998/mobileraker_companion">Mobileraker's Companion</a></h3></th>
-<th><h3><a href="https://octoeverywhere.com/?source=kiauh_readme">OctoEverywhere For Klipper</a></h3></th>
-<th><h3><a href="https://github.com/crysxd/OctoApp-Plugin">OctoApp For Klipper</a></h3></th>
-<th><h3></h3></th>
+    <th><h3><a href="https://github.com/staubgeborener/klipper-backup">Klipper-Backup</a></h3></th>
+    <th><h3><a href="https://simplyprint.io/">SimplyPrint for Klipper</a></h3></th>
 </tr>
-
 <tr>
-<th><a href="https://github.com/Clon1998/mobileraker_companion"><img src="https://raw.githubusercontent.com/Clon1998/mobileraker/master/assets/icon/mr_appicon.png" alt="OctoEverywhere Logo" height="64"></a></th>
-<th><a href="https://octoeverywhere.com/?source=kiauh_readme"><img src="https://octoeverywhere.com/img/logo.svg" alt="OctoEverywhere Logo" height="64"></a></th>
-<th><a href="https://octoapp.eu/?source=kiauh_readme"><img src="https://octoapp.eu/octoapp.webp" alt="OctoApp Logo" height="64"></a></th>
+    <th><a href="https://github.com/staubgeborener/klipper-backup"><img src="https://avatars.githubusercontent.com/u/28908603?v=4" alt="Staubgeroner Avatar" height="64"></a></th>
+    <th><a href="https://github.com/SimplyPrint"><img src="https://avatars.githubusercontent.com/u/64896552?s=200&v=4" alt="" height="64"></a></th>
 </tr>
-
 <tr>
-<th>by <a href="https://github.com/Clon1998">Patrick Schmidt</a></th>
-<th>by <a href="https://github.com/QuinnDamerell">Quinn Damerell</a></th>
-<th>by <a href="https://github.com/crysxd">Christian Würthner</a></th>
-<th></th>
+    <th>by <a href="https://github.com/Staubgeborener">Staubgeborener</a></th>
+    <th>by <a href="https://github.com/SimplyPrint">SimplyPrint</a></th>
 </tr>
-
-
 </table>
 
 <hr>
@@ -186,6 +192,12 @@ prompt and confirm by hitting ENTER.
 
 <hr>
 
+<div align="center">
+    <img src="https://repobeats.axiom.co/api/embed/a1afbda9190c04a90cf4bd3061e5573bc836cb05.svg" alt="Repobeats analytics image"/>
+</div>
+
+<hr>
+
 <h2 align="center">✨ Credits ✨</h2>
 
 * A big thank you to [lixxbox](https://github.com/lixxbox) for that awesome KIAUH-Logo!

kiauh/core/backup_manager/backup_manager.py

@@ -79,14 +79,14 @@ class BackupManager:
 
         if source is None or not Path(source).exists():
             Logger.print_info("Source directory does not exist! Skipping ...")
-            return
+            return None
 
         target = self.backup_root_dir if target is None else target
         try:
             date = get_current_date().get("date")
             time = get_current_date().get("time")
             backup_target = target.joinpath(f"{name.lower()}-{date}-{time}")
-            shutil.copytree(source, backup_target, ignore=self.ignore_folders_func)
+            shutil.copytree(source, backup_target, ignore=self.ignore_folders_func, ignore_dangling_symlinks=True)
             Logger.print_ok("Backup successful!")
 
             return backup_target

kiauh/core/menus/settings_menu.py

@@ -21,9 +21,7 @@ from core.menus import Option
 from core.menus.base_menu import BaseMenu
 from core.settings.kiauh_settings import KiauhSettings, RepoSettings
 from core.types.color import Color
-from core.types.component_status import ComponentStatus
 from procedures.switch_repo import run_switch_repo_routine
-from utils.git_utils import get_repo_name
 from utils.input_utils import get_confirm, get_string_input
 
 
@@ -141,12 +139,12 @@ class SettingsMenu(BaseMenu):
 
         repo = get_string_input(
             "Enter new repository URL",
-            regex="^[\w/.:-]+$",
+            regex=r"^[\w/.:-]+$",
             default=KLIPPER_REPO_URL if repo_name == "klipper" else MOONRAKER_REPO_URL,
         )
         branch = get_string_input(
             "Enter new branch name",
-            regex="^.+$",
+            regex=r"^.+$",
             default="master"
         )
 

kiauh/extensions/telegram_bot/moonraker_telegram_bot.py

@@ -118,7 +118,7 @@ class MoonrakerTelegramBot:
         )
         env_file_content = env_file_content.replace(
             "%CFG%",
-            f"{self.base.cfg_dir}/printer.cfg",
+            self.cfg_file.as_posix()
         )
         env_file_content = env_file_content.replace(
             "%LOG%",

kiauh/procedures/system.py

@@ -51,7 +51,7 @@ def change_system_hostname() -> None:
     )
     hostname = get_string_input(
         "Enter the new hostname",
-        regex="^[a-z0-9]+([a-z0-9-]*[a-z0-9])?$",
+        regex=r"^[a-z0-9]+([a-z0-9-]*[a-z0-9])?$",
     )
     if not get_confirm(f"Change the hostname to '{hostname}'?", default_choice=False):
         Logger.print_info("Aborting hostname change ...")

kiauh/utils/common.py

@@ -43,7 +43,8 @@ def get_kiauh_version() -> str:
     Helper method to get the current KIAUH version by reading the latest tag
     :return: string of the latest tag
     """
-    return get_local_tags(Path(__file__).parent.parent)[-1]
+    lastest_tag: str = get_local_tags(Path(__file__).parent.parent)[-1]
+    return lastest_tag
 
 
 def convert_camelcase_to_kebabcase(name: str) -> str:

kiauh/utils/git_utils.py

@@ -1,6 +1,7 @@
 from __future__ import annotations
 
 import json
+import re
 import shutil
 import urllib.request
 from http.client import HTTPResponse
@@ -118,7 +119,7 @@ def get_local_tags(repo_path: Path, _filter: str | None = None) -> List[str]:
     :return: List of tags
     """
     try:
-        cmd = ["git", "tag", "-l"]
+        cmd: List[str] = ["git", "tag", "-l"]
 
         if _filter is not None:
             cmd.append(f"'${_filter}'")
@@ -129,8 +130,10 @@ def get_local_tags(repo_path: Path, _filter: str | None = None) -> List[str]:
             cwd=repo_path.as_posix(),
         ).decode(encoding="utf-8")
 
-        tags = result.split("\n")
-        return tags[:-1]
+        tags: List[str] = result.split("\n")[:-1]
+
+        return sorted(tags, key=lambda x: [int(i) if i.isdigit() else i for i in
+                                                re.split(r'(\d+)', x)])
 
     except CalledProcessError:
         return []