jeka/ender_klipper_config
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

New backup from 14/07/24 - 19:59:57

Browse Source
This commit is contained in:
jeka
2024-07-14 19:59:57 +05:00
parent 08e374290b
commit 9a1b8bbdbe
8 changed files with 37 additions and 577 deletions
Download Patch File Download Diff File Expand all files Collapse all files

34
steel_data/config/moonraker.conf → ender_data/config/moonraker.conf
View File

@@ -1,7 +1,7 @@
[server]
host: 0.0.0.0
port: 7126
klippy_uds_address: /home/jeka/steel_data/comms/klippy.sock
port: 7125
klippy_uds_address: /home/jeka/ender_data/comms/klippy.sock
[authorization]
trusted_clients:
@@ -49,35 +49,9 @@ env: ~/moonraker-telegram-bot-env/bin/python
requirements: scripts/requirements.txt
install_script: scripts/install.sh
# Crowsnest update_manager entry
[update_manager crowsnest]
[update_manager klipper-backup-ender]
type: git_repo
path: ~/crowsnest
origin: https://github.com/mainsail-crew/crowsnest.git
managed_services: crowsnest
install_script: tools/pkglist.sh
[update_manager klipper-macros]
type: git_repo
origin: https://github.com/jschuh/klipper-macros.git
path: ~/klipper-macros
primary_branch: main
is_system_service: False
managed_services: klipper
[update_manager klipper-backup-steel]
type: git_repo
path: ~/klipper-backup-steel
path: ~/klipper-backup-ender
origin: https://github.com/Staubgeborener/klipper-backup.git
managed_services: moonraker
primary_branch: main
[power printer]
type: gpio
pin: gpiochip0/gpio2
off_when_shutdown: true
on_when_job_queued: true
locked_while_printing: true
restart_klipper_when_powered: false
initial_state: off

13
ender_data/config/printer.cfg Normal file
View File

@@ -0,0 +1,13 @@
[include shell_command.cfg]
[include fluidd.cfg]
[mcu]
serial: /dev/serial/by-id/<your-mcu-id>
[virtual_sdcard]
path: /home/jeka/ender_data/gcodes
on_error_gcode: CANCEL_PRINT
[printer]
kinematics: none
max_velocity: 1000
max_accel: 1000

0
steel_data/config/shell_command.cfg → ender_data/config/shell_command.cfg
View File

20
ender_data/config/telegram.conf Normal file
View File

@@ -0,0 +1,20 @@
# Please refer to the wiki(https://github.com/nlef/moonraker-telegram-bot/wiki) for detailed information on how to configure the bot
[bot]
server: localhost
bot_token: AweSomeBotToken
chat_id: 0
[camera]
host: http://localhost:8080/?action=stream
[progress_notification]
percent: 5
height: 5
time: 5
[timelapse]
cleanup: true
height: 0.2
time: 5
target_fps: 30

60
steel_data/config/crowsnest.conf
View File

@@ -1,60 +0,0 @@
#### crowsnest.conf
#### This is a typical default config.
#### Also used as default in mainsail / MainsailOS
#### See:
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
#### for details to configure to your needs.
#####################################################################
#### #####
#### Information about ports and according URL's #####
#### #####
#####################################################################
#### #####
#### Port 8080 equals /webcam/?action=[stream/snapshot] #####
#### Port 8081 equals /webcam2/?action=[stream/snapshot] #####
#### Port 8082 equals /webcam3/?action=[stream/snapshot] #####
#### Port 8083 equals /webcam4/?action=[stream/snapshot] #####
#### #####
#### Note: These ports are default for most Mainsail #####
#### installations. To use any other port would involve #####
#### changing the proxy configuration or using directly #####
#### http://<ip>:<port>/?action=[stream/snapshot] #####
#### #####
#####################################################################
#### RTSP Stream URL: ( if enabled and supported ) #####
#### rtsp://<ip>:<rtsp_port>/stream.h264 #####
#####################################################################
[crowsnest]
log_path: /home/jeka/steel_data/logs/crowsnest.log
log_level: verbose # Valid Options are quiet/verbose/debug
delete_log: false # Deletes log on every restart, if set to true
no_proxy: false
[cam 1]
mode: camera-streamer # ustreamer - Provides mjpg and snapshots. (All devices)
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
rtsp_port: 8554 # Set different ports for each device!
port: 8080 # HTTP/MJPG Stream/Snapshot Port
device: /base/soc/i2c0mux/i2c@1/imx219@10
resolution: 1296x972 # widthxheight format
max_fps: 15 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: # You can run the Stream Services with custom flags.
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
[cam 2]
mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
rtsp_port: 8555 # Set different ports for each device!
port: 8081 # HTTP/MJPG Stream/Snapshot Port
device: /dev/v4l/by-id/usb-AONI_ELECTRONIC_CO.LTD_Canyon_CNS-CWC5_Webcam_20200706001-video-index0
resolution: 1024x768 # widthxheight format
max_fps: 15 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: # You can run the Stream Services with custom flags.
v4l2ctl: focus_auto=0,exposure_auto=1,exposure_absolute=450 # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
#

267
steel_data/config/macros.cfg
View File

@@ -1,267 +0,0 @@
# This file provides examples of Klipper G-Code macros. The snippets
# in this file may be copied into the main printer.cfg file and
# customized.
# See docs/Config_Reference.md for a description of parameters.
#
# BACKUP config to git.npau.ru
[gcode_macro update_git]
gcode:
{% set message = params.MESSAGE|default() %}
{% if message %}
RUN_SHELL_COMMAND CMD=update_git_script_message PARAMS="'{params.MESSAGE}'"
{% else %}
RUN_SHELL_COMMAND CMD=update_git_script
{% endif %}
[gcode_shell_command update_git_script]
command: bash -c "bash $HOME/klipper-backup-steel/script.sh"
timeout: 90.0
verbose: True
[gcode_shell_command update_git_script_message]
command: bash -c "bash $HOME/klipper-backup-steel/script.sh $0"
timeout: 90.0
verbose: True
######################################################################
# Start Print and End Print
######################################################################
# Replace the slicer's custom start and end g-code scripts with
# START_PRINT and END_PRINT. See docs/Slicers.md for more information on using these macros.
[gcode_macro _POWER_OFF_PRINTER]
gcode:
{action_call_remote_method("set_device_power",
device="printer",
state="off")}
[delayed_gcode POWER_OFF_PRINTER_CHECK]
gcode:
{% if printer.idle_timeout.state == "Idle" or printer.idle_timeout.state == "Ready" %}
{% if printer.extruder.temperature < 50.0 and printer.heater_bed.temperature < 50.0 %}
{% if printer.extruder.target == 0.0 and printer.heater_bed.target == 0.0 %}
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=0
_POWER_OFF_PRINTER
{% else %}
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=2
{% endif %}
{% else %}
{% if printer.idle_timeout.state == "Printing" %}
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=0
{% else %}
{% if printer.extruder.target == 0.0 and printer.heater_bed.target == 0.0 %}
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=2
{% else %}
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=0
{% endif %}
{% endif %}
{% endif %}
{% endif %}
[gcode_macro ACTIVATE_POWER_OFF]
gcode:
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK_ACT DURATION=60
[gcode_macro DEACTIVATE_POWER_OFF]
gcode:
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK_ACT DURATION=0
[delayed_gcode POWER_OFF_PRINTER_CHECK_ACT]
gcode:
{% if printer.idle_timeout.state == "Idle" or printer.idle_timeout.state == "Ready" %}
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=30
{% else %}
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK_ACT DURATION=60
{% endif %}
[gcode_macro START_PRINT]
gcode:
{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
# Start bed heating
M140 S{BED_TEMP}
# Use absolute coordinates
G90
# Reset the G-Code Z offset (adjust Z offset if needed)
SET_GCODE_OFFSET Z=0.0
# Home the printer
G28
# Move the nozzle near the bed
BED_MESH_PROFILE LOAD=default
G1 Z5 F3000
# Move the nozzle very close to the bed
G1 Z0.15 F300
# Wait for bed to reach temperature
M190 S{BED_TEMP}
# Set and wait for nozzle to reach temperature
M109 S{EXTRUDER_TEMP}
[gcode_macro END_PRINT]
gcode:
# Turn off bed, extruder, and fan
M140 S0
M104 S0
M106 S0
# Move nozzle away from print while retracting
G91
G1 X-2 Y-2 E-3 F300
# Raise nozzle by 10mm
G1 Z10 F3000
G90
# Disable steppers
M84
######################################################################
# Beeper
######################################################################
# M300 : Play tone. Beeper support, as commonly found on usual LCD
# displays (i.e. RepRapDiscount 2004 Smart Controller, RepRapDiscount
# 12864 Full Graphic). This defines a custom I/O pin and a custom
# GCODE macro. Usage:
# M300 [P<ms>] [S<Hz>]
# P is the tone duration, S the tone frequency.
# The frequency won't be pitch perfect.
[pwm_cycle_time BEEPER_pin]
pin: EXP1_1
# Beeper pin. This parameter must be provided.
# ar37 is the default RAMPS/MKS pin.
value: 0
# Silent at power on, set to 1 if active low.
shutdown_value: 0
# Disable at emergency shutdown (no PWM would be available anyway).
cycle_time: 0.001
# Default PWM frequency : 0.001 = 1ms will give a tone of 1kHz
# Although not pitch perfect.
[gcode_macro M300]
gcode:
# Use a default 1kHz tone if S is omitted.
{% set S = params.S|default(1000)|int %}
# Use a 10ms duration is P is omitted.
{% set P = params.P|default(100)|int %}
SET_PIN PIN=BEEPER_pin VALUE=0.5 CYCLE_TIME={ 1.0/S if S > 0 else 1 }
G4 P{P}
SET_PIN PIN=BEEPER_pin VALUE=0
######################################################################
# Filament Change
######################################################################
# M600: Filament Change. This macro will pause the printer, move the
# tool to the change position, and retract the filament 50mm. Adjust
# the retraction settings for your own extruder. After filament has
# been changed, the print can be resumed from its previous position
# with the "RESUME" gcode.
[pause_resume]
[gcode_macro M600]
gcode:
{% set X = params.X|default(50)|float %}
{% set Y = params.Y|default(0)|float %}
{% set Z = params.Z|default(10)|float %}
SAVE_GCODE_STATE NAME=M600_state
PAUSE
G91
G1 E-.8 F2700
G1 Z{Z}
G90
G1 X{X} Y{Y} F3000
G91
G1 E-50 F1000
RESTORE_GCODE_STATE NAME=M600_state
######################################################################
# Override M117 command with rawparams
######################################################################
# The macro below will override the default M117 command to echo the message.
#
# It uses the rawparams pseudo-variable that contains the full unparsed
# parameters that was passed to the M117 command.
#
# As this can include comments, we are trimming the text when a `;` or `#` is
# found, and escaping any existing `"`
[gcode_macro M117]
rename_existing: M117.1
gcode:
{% if rawparams %}
{% set escaped_msg = rawparams.split(';', 1)[0].split('\x23', 1)[0]|replace('"', '\\"') %}
SET_DISPLAY_TEXT MSG="{escaped_msg}"
RESPOND TYPE=command MSG="{escaped_msg}"
{% else %}
SET_DISPLAY_TEXT
{% endif %}
# SDCard 'looping' (aka Marlin M808 commands) support
#
# Support SDCard looping
[sdcard_loop]
# 'Marlin' style M808 compatibility macro for SDCard looping
[gcode_macro M808]
gcode:
{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}
# Cancel object (aka Marlin/RRF M486 commands) support
#
# Enable object exclusion
[exclude_object]
[gcode_macro M486]
gcode:
# Parameters known to M486 are as follows:
# [C<flag>] Cancel the current object
# [P<index>] Cancel the object with the given index
# [S<index>] Set the index of the current object.
# If the object with the given index has been canceled, this will cause
# the firmware to skip to the next object. The value -1 is used to
# indicate something that isn’t an object and shouldn’t be skipped.
# [T<count>] Reset the state and set the number of objects
# [U<index>] Un-cancel the object with the given index. This command will be
# ignored if the object has already been skipped
{% if 'exclude_object' not in printer %}
{action_raise_error("[exclude_object] is not enabled")}
{% endif %}
{% if 'T' in params %}
EXCLUDE_OBJECT RESET=1
{% for i in range(params.T | int) %}
EXCLUDE_OBJECT_DEFINE NAME={i}
{% endfor %}
{% endif %}
{% if 'C' in params %}
EXCLUDE_OBJECT CURRENT=1
{% endif %}
{% if 'P' in params %}
EXCLUDE_OBJECT NAME={params.P}
{% endif %}
{% if 'S' in params %}
{% if params.S == '-1' %}
{% if printer.exclude_object.current_object %}
EXCLUDE_OBJECT_END NAME={printer.exclude_object.current_object}
{% endif %}
{% else %}
EXCLUDE_OBJECT_START NAME={params.S}
{% endif %}
{% endif %}
{% if 'U' in params %}
EXCLUDE_OBJECT RESET=1 NAME={params.U}
{% endif %}

180
steel_data/config/printer.cfg
View File

@@ -1,180 +0,0 @@
[include shell_command.cfg]
[include fluidd.cfg]
[virtual_sdcard]
path: /home/jeka/steel_data/gcodes
on_error_gcode: CANCEL_PRINT
[include macros.cfg]
[virtual_sdcard]
path: /home/jeka/steel_data/gcodes
on_error_gcode: CANCEL_PRINT
[mcu]
serial: /dev/ttySteel
# ================================================================================
# Homing Override:
# This section is called any time a G28 [home] is called.
;[homing_override]
;set_position_z:0
;gcode:
; G1 Z10 F600
; G28 X Y
; G1 X102.5 Y99.5 F6000
; G28 Z
; G1 Z5
[bed_mesh]
speed: 60
horizontal_move_z: 5
mesh_min: 15,15
mesh_max: 180,180
probe_count: 3, 3
mesh_pps: 2, 2
fade_start: 1
fade_end: 10
fade_target: 0
[bed_screws]
screw1: 15,10
screw2: 15,185
screw3: 185,10
screw4: 185,185
#[safe_z_home]
#home_xy_position = 0,0
#speed = 50
#z_hop = 5
#_hop_speed = 5
[stepper_x]
step_pin: PF0
dir_pin: !PF1
enable_pin: !PD7
microsteps: 16
rotation_distance: 32
endstop_pin: ^!PE4
position_endstop: 200
position_max: 200
position_min: 0
homing_speed: 50
[stepper_y]
step_pin: PF6
dir_pin: !PF7
enable_pin: !PF2
microsteps: 16
rotation_distance: 32
endstop_pin: ^!PJ0
position_endstop: 200
position_max: 200
position_min: 0
homing_speed: 50
[stepper_z]
step_pin: PL3
dir_pin: !PL1
enable_pin: !PK0
microsteps: 16
rotation_distance: 0.8
endstop_pin: ^!PD3
#position_endstop: 0.0
position_max: 270
position_min: -5
homing_speed: 20
[extruder]
max_extrude_only_distance: 101.0
step_pin: PA4
dir_pin: PA6
enable_pin: !PA2
microsteps: 16
rotation_distance: 22.222
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PB4
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PK5
#control: pid
min_temp: 0
max_temp: 250
#pid_kp = 21.801
#pid_ki = 1.546
#pid_kd = 76.848
[heater_bed]
heater_pin: PH5
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PK6
control: watermark
min_temp: 0
max_temp: 110
;pid_kp = 72.814
;pid_ki = 1.634
;pid_kd = 810.970
[fan]
pin: PH6
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100
square_corner_velocity: 20.0
[display]
lcd_type: st7920
cs_pin: EXP1_4
sclk_pin: EXP1_5
sid_pin: EXP1_3
encoder_pins: ^EXP2_3, ^EXP2_5
click_pin: ^!EXP1_2
;[output_pin BEEPER_pin]
;ipin: EXP1_1
# Common EXP1 / EXP2 (display) pins
[board_pins]
aliases:
# Common EXP1 header found on many "all-in-one" ramps clones
EXP1_1=PC0, EXP1_3=PH0, EXP1_5=PA1, EXP1_7=PA5, EXP1_9=<GND>,
EXP1_2=PC2, EXP1_4=PH1, EXP1_6=PA3, EXP1_8=PA7, EXP1_10=<5V>,
# EXP2 header
EXP2_1=PB3, EXP2_3=PC6, EXP2_5=PC4, EXP2_7=PL0, EXP2_9=<GND>,
EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PG0, EXP2_10=<RST>
# Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
# Note, some boards wire: EXP2_8=<RST>, EXP2_10=PG0
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 28.696
#*# pid_ki = 2.035
#*# pid_kd = 101.153
#*#
#*# [stepper_z]
#*# position_endstop = 4.180
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 0.410000, 0.500000, 0.390000
#*# 0.380000, 0.360000, 0.190000
#*# 0.330000, 0.410000, 0.320000
#*# x_count = 3
#*# y_count = 3
#*# mesh_x_pps = 2
#*# mesh_y_pps = 2
#*# algo = lagrange
#*# tension = 0.2
#*# min_x = 15.0
#*# max_x = 180.0
#*# min_y = 15.0
#*# max_y = 180.0

40
steel_data/config/telegram.conf
View File

@@ -1,40 +0,0 @@
# Please refer to the wiki(https://github.com/nlef/moonraker-telegram-bot/wiki) for detailed information on how to configure the bot
#[bot]
#server: localhost
#bot_token: AweSomeBotToken
#chat_id: 0
#
#[camera]
#host: http://localhost:8080/?action=streamhttps://github.com/nlef/moonraker-telegram-bot/wiki/Sample-config$0
#
#[progress_notification]
#percent: 5
#height: 5
#time: 5
#
#[timelapse]
#cleanup: true
#height: 0.2
#time: 5
#target_fps: 30
[bot]
server: 192.168.77.44:7126
bot_token: 5171688404:AAH1P9RgT1AsICfVjhjC7jTjL7W_iFKnUhM
chat_id: 158812314
[camera]
host: http://192.168.77.44/webcam2/?action=stream
[progress_notification]
percent: 5
height: 5.0
time: 5
#[timelapse]
#cleanup: true
#height: 0.2
#time: 5
#target_fps: 30