Merge fb91e5c9f5 into 20262f21db

getdomains-install.sh

@@ -26,7 +26,7 @@ EOF
 
 add_mark() {
     grep -q "99 vpn" /etc/iproute2/rt_tables || echo '99 vpn' >> /etc/iproute2/rt_tables
-    
+
     if ! uci show network | grep -q mark0x1; then
         printf "\033[32;1mConfigure mark rule\033[0m\n"
         uci add network rule
@@ -45,13 +45,14 @@ add_tunnel() {
     echo "2) OpenVPN"
     echo "3) Sing-box"
     echo "4) tun2socks"
-    echo "5) Skip this step"
+    echo "5) wgForYoutube"
+    echo "6) Skip this step"
 
     while true; do
     read -r -p '' TUNNEL
-        case $TUNNEL in 
+        case $TUNNEL in
 
-        1) 
+        1)
             TUNNEL=wg
             break
             ;;
@@ -61,17 +62,22 @@ add_tunnel() {
             break
             ;;
 
-        3) 
+        3)
             TUNNEL=singbox
             break
             ;;
 
-        4) 
+        4)
             TUNNEL=tun2socks
             break
             ;;
 
-        5)
+        5) 
+            TUNNEL=wgForYoutube
+            break
+            ;;
+
+        6)
             echo "Skip"
             TUNNEL=0
             break
@@ -114,7 +120,7 @@ add_tunnel() {
         if [ "$WG_ENDPOINT_PORT" = '51820' ]; then
             echo $WG_ENDPOINT_PORT
         fi
-        
+
         uci set network.wg0=interface
         uci set network.wg0.proto='wireguard'
         uci set network.wg0.private_key=$WG_PRIVATE_KEY
@@ -182,7 +188,7 @@ cat << 'EOF' > /etc/sing-box/config.json
       "inet4_address": "172.16.250.1/30",
       "auto_route": false,
       "strict_route": false,
-      "sniff": true 
+      "sniff": true
    }
   ],
   "outbounds": [
@@ -207,6 +213,11 @@ EOF
         printf "\033[32;1mConfigure route for Sing-box\033[0m\n"
         route_vpn
     fi
+
+    if [ "$TUNNEL" == 'wgForYoutube' ]; then
+        add_internal_wg
+    fi
+
 }
 
 dnsmasqfull() {
@@ -275,7 +286,7 @@ add_zone() {
         uci set firewall.@zone[-1].family='ipv4'
         uci commit firewall
     fi
-    
+
     if [ "$TUNNEL" == 0 ]; then
         printf "\033[32;1mForwarding setting skipped\033[0m\n"
     elif uci show firewall | grep -q "@forwarding.*name='$TUNNEL-lan'"; then
@@ -354,7 +365,7 @@ add_set() {
 add_dns_resolver() {
     echo "Configure DNSCrypt2 or Stubby? It does matter if your ISP is spoofing DNS requests"
     DISK=$(df -m / | awk 'NR==2{ print $2 }')
-    if [[ "$DISK" -lt 32 ]]; then 
+    if [[ "$DISK" -lt 32 ]]; then
         printf "\033[31;1mYour router a disk have less than 32MB. It is not recommended to install DNSCrypt, it takes 10MB\033[0m\n"
     fi
     echo "Select:"
@@ -364,9 +375,9 @@ add_dns_resolver() {
 
     while true; do
     read -r -p '' DNS_RESOLVER
-        case $DNS_RESOLVER in 
+        case $DNS_RESOLVER in
 
-        1) 
+        1)
             echo "Skiped"
             break
             ;;
@@ -376,7 +387,7 @@ add_dns_resolver() {
             break
             ;;
 
-        3) 
+        3)
             DNS_RESOLVER=STUBBY
             break
             ;;
@@ -408,7 +419,7 @@ add_dns_resolver() {
                 uci add_list dhcp.@dnsmasq[0].server="127.0.0.53#53"
                 uci add_list dhcp.@dnsmasq[0].server='/use-application-dns.net/'
                 uci commit dhcp
-                
+
                 printf "\033[32;1mDnsmasq restart\033[0m\n"
 
                 /etc/init.d/dnsmasq restart
@@ -468,9 +479,9 @@ add_getdomains() {
 
     while true; do
     read -r -p '' COUNTRY
-        case $COUNTRY in 
+        case $COUNTRY in
 
-        1) 
+        1)
             COUNTRY=russia_inside
             break
             ;;
@@ -480,12 +491,12 @@ add_getdomains() {
             break
             ;;
 
-        3) 
+        3)
             COUNTRY=ukraine
             break
             ;;
 
-        4) 
+        4)
             echo "Skiped"
             COUNTRY=0
             break
@@ -518,13 +529,19 @@ start () {
 EOF
 cat << 'EOF' >> /etc/init.d/getdomains
     count=0
+    maxCount=10
     while true; do
+        if [ ${count} -eq ${maxCount} ]; then
+            echo "Break on ${maxCount} attempt"
+            break
+        fi
         if curl -m 3 github.com; then
             curl -f $DOMAINS --output /tmp/dnsmasq.d/domains.lst
             break
         else
             echo "GitHub is not available. Check the internet availability [$count]"
             count=$((count+1))
+            sleep 5
         fi
     done
 
@@ -552,6 +569,147 @@ EOF
     fi
 }
 
+add_internal_wg() {
+    printf "\033[32;1mConfigure WireGuard\033[0m\n"
+    if opkg list-installed | grep -q wireguard-tools; then
+        echo "Wireguard already installed"
+    else
+        echo "Installed wg..."
+        opkg install wireguard-tools
+    fi
+
+    read -r -p "Enter the private key (from [Interface]):"$'\n' WG_PRIVATE_KEY_INT
+
+    while true; do
+        read -r -p "Enter internal IP address with subnet, example 192.168.100.5/24 (from [Interface]):"$'\n' WG_IP
+        if echo "$WG_IP" | egrep -oq '^([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]+$'; then
+            break
+        else
+            echo "This IP is not valid. Please repeat"
+        fi
+    done
+
+    read -r -p "Enter the public key (from [Peer]):"$'\n' WG_PUBLIC_KEY_INT
+    read -r -p "If use PresharedKey, Enter this (from [Peer]). If your don't use leave blank:"$'\n' WG_PRESHARED_KEY_INT
+    read -r -p "Enter Endpoint host without port (Domain or IP) (from [Peer]):"$'\n' WG_ENDPOINT_INT
+
+    read -r -p "Enter Endpoint host port (from [Peer]) [51820]:"$'\n' WG_ENDPOINT_PORT_INT
+    WG_ENDPOINT_PORT_INT=${WG_ENDPOINT_PORT_INT:-51820}
+    if [ "$WG_ENDPOINT_PORT_INT" = '51820' ]; then
+        echo $WG_ENDPOINT_PORT_INT
+    fi
+    
+    uci set network.wg1=interface
+    uci set network.wg1.proto='wireguard'
+    uci set network.wg1.private_key=$WG_PRIVATE_KEY_INT
+    uci set network.wg1.listen_port='51820'
+    uci set network.wg1.addresses=$WG_IP
+
+    if ! uci show network | grep -q wireguard_wg1; then
+        uci add network wireguard_wg1
+    fi
+    uci set network.@wireguard_wg1[0]=wireguard_wg1
+    uci set network.@wireguard_wg1[0].name='wg1_client'
+    uci set network.@wireguard_wg1[0].public_key=$WG_PUBLIC_KEY_INT
+    uci set network.@wireguard_wg1[0].preshared_key=$WG_PRESHARED_KEY_INT
+    uci set network.@wireguard_wg1[0].route_allowed_ips='0'
+    uci set network.@wireguard_wg1[0].persistent_keepalive='25'
+    uci set network.@wireguard_wg1[0].endpoint_host=$WG_ENDPOINT_INT
+    uci set network.@wireguard_wg1[0].allowed_ips='0.0.0.0/0'
+    uci set network.@wireguard_wg1[0].endpoint_port=$WG_ENDPOINT_PORT_INT
+    uci commit network
+
+    grep -q "110 vpninternal" /etc/iproute2/rt_tables || echo '110 vpninternal' >> /etc/iproute2/rt_tables
+
+    if ! uci show network | grep -q mark0x2; then
+        printf "\033[32;1mConfigure mark rule\033[0m\n"
+        uci add network rule
+        uci set network.@rule[-1].name='mark0x2'
+        uci set network.@rule[-1].mark='0x2'
+        uci set network.@rule[-1].priority='110'
+        uci set network.@rule[-1].lookup='vpninternal'
+        uci commit
+    fi
+
+    if ! uci show network | grep -q vpn_route_internal; then
+        printf "\033[32;1mAdd route\033[0m\n"
+        uci set network.vpn_route_internal=route
+        uci set network.vpn_route_internal.name='vpninternal'
+        uci set network.vpn_route_internal.interface='wg1'
+        uci set network.vpn_route_internal.table='vpninternal'
+        uci set network.vpn_route_internal.target='0.0.0.0/0'
+        uci commit network
+    fi
+
+    if ! uci show firewall | grep -q "@zone.*name='wg_internal'"; then
+        printf "\033[32;1mZone Create\033[0m\n"
+        uci add firewall zone
+        uci set firewall.@zone[-1].name="wg_internal"
+        uci set firewall.@zone[-1].network='wg1'
+        uci set firewall.@zone[-1].forward='REJECT'
+        uci set firewall.@zone[-1].output='ACCEPT'
+        uci set firewall.@zone[-1].input='REJECT'
+        uci set firewall.@zone[-1].masq='1'
+        uci set firewall.@zone[-1].mtu_fix='1'
+        uci set firewall.@zone[-1].family='ipv4'
+        uci commit firewall
+    fi
+
+    if ! uci show firewall | grep -q "@forwarding.*name='wg_internal'"; then
+        printf "\033[32;1mConfigured forwarding\033[0m\n"
+        uci add firewall forwarding
+        uci set firewall.@forwarding[-1]=forwarding
+        uci set firewall.@forwarding[-1].name="wg_internal-lan"
+        uci set firewall.@forwarding[-1].dest="wg_internal"
+        uci set firewall.@forwarding[-1].src='lan'
+        uci set firewall.@forwarding[-1].family='ipv4'
+        uci commit firewall
+    fi
+
+    if uci show firewall | grep -q "@ipset.*name='vpn_domains_internal'"; then
+        printf "\033[32;1mSet already exist\033[0m\n"
+    else
+        printf "\033[32;1mCreate set\033[0m\n"
+        uci add firewall ipset
+        uci set firewall.@ipset[-1].name='vpn_domains_internal'
+        uci set firewall.@ipset[-1].match='dst_net'
+        uci commit firewall
+    fi
+
+    if uci show firewall | grep -q "@rule.*name='mark_domains_intenal'"; then
+        printf "\033[32;1mRule for set already exist\033[0m\n"
+    else
+        printf "\033[32;1mCreate rule set\033[0m\n"
+        uci add firewall rule
+        uci set firewall.@rule[-1]=rule
+        uci set firewall.@rule[-1].name='mark_domains_intenal'
+        uci set firewall.@rule[-1].src='lan'
+        uci set firewall.@rule[-1].dest='*'
+        uci set firewall.@rule[-1].proto='all'
+        uci set firewall.@rule[-1].ipset='vpn_domains_internal'
+        uci set firewall.@rule[-1].set_mark='0x2'
+        uci set firewall.@rule[-1].target='MARK'
+        uci set firewall.@rule[-1].family='ipv4'
+        uci commit firewall
+    fi
+
+    if uci show dhcp | grep -q "@ipset.*name='vpn_domains_internal'"; then
+        printf "\033[32;1mDomain on vpn_domains_internal already exist\033[0m\n"
+    else
+        printf "\033[32;1mCreate domain for vpn_domains_internal\033[0m\n"
+        uci add dhcp ipset
+        uci add_list dhcp.@ipset[-1].name='vpn_domains_internal'
+        uci add_list dhcp.@ipset[-1].domain='googlevideo.com'
+        uci add_list dhcp.@ipset[-1].domain='yt3.ggpht.com'
+        uci commit dhcp
+    fi
+
+    service dnsmasq restart
+    service network restart
+
+    exit 0
+}
+
 # System Details
 MODEL=$(grep machine /proc/cpuinfo | cut -d ':' -f 2)
 RELEASE=$(grep OPENWRT_RELEASE /etc/os-release | awk -F '"' '{print $2}')

templates/openwrt-getdomains.j2

@@ -22,13 +22,19 @@ start () {
     DOMAINS=https://raw.githubusercontent.com/itdoginfo/allow-domains/main/Ukraine/inside-dnsmasq-ipset.lst
     {% endif %}
     count=0
+    maxCount=10
     while true; do
+        if [ ${count} -eq ${maxCount} ]; then
+            echo "Break on ${maxCount} attempt"
+            break
+        fi
         if curl -m 3 github.com; then
             curl -f $DOMAINS --output /tmp/dnsmasq.d/domains.lst
             break
         else
             echo "GitHub is not available. Check the internet availability [$count]"
             count=$((count+1))
+            sleep 5
         fi
     done
 
@@ -46,7 +52,12 @@ start () {
     mkdir -p $dir
 
     count=0
+    maxCount=10
     while true; do
+        if [ ${count} -eq ${maxCount} ]; then
+            echo "Break on ${maxCount} attempt"
+            break
+        fi
         if curl -m 3 https://antifilter.download/; then
             {% if list_subnet %}
             curl -f -z $dir/subnet.lst https://antifilter.download/list/subnet.lst --output $dir/subnet.lst
@@ -56,15 +67,16 @@ start () {
             {% endif %}
             {% if list_community %}
             curl -f -z $dir/community.lst https://community.antifilter.download/list/community.lst --output $dir/community.lst
-            {% endif %}  
+            {% endif %}
             break
         else
             echo "antifilter.download is not available. Check the internet availability [$count]"
             count=$((count+1))
+            sleep 5
         fi
     done
 
     echo "Firewall restart"
     /etc/init.d/firewall restart
-    {% endif %}  
+    {% endif %}
 }