Merge pull request #13 from Slava-Shchipunov/master

feat: add AmneziaWG
2025-12-11 17:44:29 +05:00 · 2024-08-18 13:55:37 +03:00
parent 3f069118ca ec3655a8e9
commit 49beabdf05
2 changed files with 192 additions and 6 deletions
--- a/README.md
+++ b/README.md
@@ -124,12 +124,16 @@ service getdomains start
 Не работает под 21ой версией. Поэтому при его выборе playbook выдаст ошибку.
 Для 22ой версии нужно установить пакет вручную.
 - tun2socks настраивается только роутинг и зона. Всё остальное нужно настроить вручную
+- wgForYoutube - настройка Wireguard только для Youtube. Настраивается автоматически через переменные
+- Amnezia wireguard - настраивается автоматически через переменныепеременные. Скрипт проверяет наличие пакетов под вашу платформу в [стороннем репозитории](https://github.com/Slava-Shchipunov/awg-openwrt/releases), так как в официальном репозитории OpenWRT они отсутствуют. Если подходящих пакетов нет, перед настройкой необходимо будет самостоятельно [собрать бинарники AmneziaWG](https://github.com/itdoginfo/domain-routing-openwrt/wiki/Amnezia-WG-Build) для своего устройства и установить их

-Для **tunnel** четыре возможных значения:
+Для **tunnel** шесть возможных значений:
 - wg
 - openvpn
 - singbox
 - tun2socks
+- wgForYoutube
+- awg

 В случае использования WG:
 ```
@@ -200,4 +204,4 @@ service getdomains start

 ---

-[Telegram-канал с обновлениями](https://t.me/+lW1HmBO_Fa00M2Iy)
+[Telegram-канал с обновлениями](https://t.me/+lW1HmBO_Fa00M2Iy)
--- a/getdomains-install.sh
+++ b/getdomains-install.sh
@@ -13,6 +13,12 @@ cat << EOF > /etc/hotplug.d/iface/30-vpnroute
 #!/bin/sh

 ip route add table vpn default dev wg0
+EOF
+    elif [ "$TUNNEL" == awg ]; then
+cat << EOF > /etc/hotplug.d/iface/30-vpnroute
+#!/bin/sh
+
+ip route add table vpn default dev awg0
 EOF
    elif [ "$TUNNEL" == singbox ] || [ "$TUNNEL" == ovpn ] || [ "$TUNNEL" == tun2socks ]; then
 cat << EOF > /etc/hotplug.d/iface/30-vpnroute
@@ -39,14 +45,15 @@ add_mark() {
 }

 add_tunnel() {
-    echo "We can automatically configure only Wireguard. OpenVPN, Sing-box(Shadowsocks2022, VMess, VLESS, etc) and tun2socks will need to be configured manually"
+    echo "We can automatically configure only Wireguard and Amnezia WireGuard. OpenVPN, Sing-box(Shadowsocks2022, VMess, VLESS, etc) and tun2socks will need to be configured manually"
    echo "Select a tunnel:"
    echo "1) WireGuard"
    echo "2) OpenVPN"
    echo "3) Sing-box"
    echo "4) tun2socks"
    echo "5) wgForYoutube"
-    echo "6) Skip this step"
+    echo "6) Amnezia WireGuard"
+    echo "7) Skip this step"

    while true; do
    read -r -p '' TUNNEL
@@ -77,7 +84,12 @@ add_tunnel() {
            break
            ;;

-        6)
+        6) 
+            TUNNEL=awg
+            break
+            ;;
+
+        7)
            echo "Skip"
            TUNNEL=0
            break
@@ -218,6 +230,160 @@ EOF
        add_internal_wg
    fi

+    if [ "$TUNNEL" == 'awg' ]; then
+        printf "\033[32;1mConfigure Amnezia WireGuard\033[0m\n"
+
+        # Получение pkgarch с наибольшим приоритетом
+        PKGARCH=$(opkg print-architecture | awk 'BEGIN {max=0} {if ($3 > max) {max = $3; arch = $2}} END {print arch}')
+
+        TARGET=$(ubus call system board | jsonfilter -e '@.release.target' | cut -d '/' -f 1)
+        SUBTARGET=$(ubus call system board | jsonfilter -e '@.release.target' | cut -d '/' -f 2)
+        VERSION=$(ubus call system board | jsonfilter -e '@.release.version')
+        PKGPOSTFIX="_v${VERSION}_${PKGARCH}_${TARGET}_${SUBTARGET}.ipk"
+        BASE_URL="https://github.com/Slava-Shchipunov/awg-openwrt/releases/download/"
+
+        AWG_DIR="/tmp/amneziawg"
+        mkdir -p "$AWG_DIR"
+
+        if opkg list-installed | grep -q amneziawg-tools; then
+            echo "amneziawg-tools already installed"
+        else
+            AMNEZIAWG_TOOLS_FILENAME="amneziawg-tools${PKGPOSTFIX}"
+            DOWNLOAD_URL="${BASE_URL}v${VERSION}/${AMNEZIAWG_TOOLS_FILENAME}"
+            curl -L -o "$AWG_DIR/$AMNEZIAWG_TOOLS_FILENAME" "$DOWNLOAD_URL"
+
+            if [ $? -eq 0 ]; then
+                echo "amneziawg-tools file downloaded successfully"
+            else
+                echo "Error downloading amneziawg-tools. Please, install amneziawg-tools manually and run the script again"
+                exit 1
+            fi
+
+            opkg install "$AWG_DIR/$AMNEZIAWG_TOOLS_FILENAME"
+
+            if [ $? -eq 0 ]; then
+                echo "amneziawg-tools file downloaded successfully"
+            else
+                echo "Error installing amneziawg-tools. Please, install amneziawg-tools manually and run the script again"
+                exit 1
+            fi
+        fi
+        
+        if opkg list-installed | grep -q kmod-amneziawg; then
+            echo "kmod-amneziawg already installed"
+        else
+            KMOD_AMNEZIAWG_FILENAME="kmod-amneziawg${PKGPOSTFIX}"
+            DOWNLOAD_URL="${BASE_URL}v${VERSION}/${KMOD_AMNEZIAWG_FILENAME}"
+            curl -L -o "$AWG_DIR/$KMOD_AMNEZIAWG_FILENAME" "$DOWNLOAD_URL"
+
+            if [ $? -eq 0 ]; then
+                echo "kmod-amneziawg file downloaded successfully"
+            else
+                echo "Error downloading kmod-amneziawg. Please, install kmod-amneziawg manually and run the script again"
+                exit 1
+            fi
+            
+            opkg install "$AWG_DIR/$KMOD_AMNEZIAWG_FILENAME"
+
+            if [ $? -eq 0 ]; then
+                echo "kmod-amneziawg file downloaded successfully"
+            else
+                echo "Error installing kmod-amneziawg. Please, install kmod-amneziawg manually and run the script again"
+                exit 1
+            fi
+        fi
+        
+        if opkg list-installed | grep -q luci-app-amneziawg; then
+            echo "luci-app-amneziawg already installed"
+        else
+            LUCI_APP_AMNEZIAWG_FILENAME="luci-app-amneziawg${PKGPOSTFIX}"
+            DOWNLOAD_URL="${BASE_URL}v${VERSION}/${LUCI_APP_AMNEZIAWG_FILENAME}"
+            curl -L -o "$AWG_DIR/$LUCI_APP_AMNEZIAWG_FILENAME" "$DOWNLOAD_URL"
+
+            if [ $? -eq 0 ]; then
+                echo "luci-app-amneziawg file downloaded successfully"
+            else
+                echo "Error downloading luci-app-amneziawg. Please, install luci-app-amneziawg manually and run the script again"
+                exit 1
+            fi
+
+            opkg install "$AWG_DIR/$LUCI_APP_AMNEZIAWG_FILENAME"
+
+            if [ $? -eq 0 ]; then
+                echo "luci-app-amneziawg file downloaded successfully"
+            else
+                echo "Error installing luci-app-amneziawg. Please, install luci-app-amneziawg manually and run the script again"
+                exit 1
+            fi
+        fi
+
+        rm -rf "$AWG_DIR"
+
+        route_vpn
+
+        read -r -p "Enter the private key (from [Interface]):"$'\n' AWG_PRIVATE_KEY
+
+        while true; do
+            read -r -p "Enter internal IP address with subnet, example 192.168.100.5/24 (Address from [Interface]):"$'\n' AWG_IP
+            if echo "$AWG_IP" | egrep -oq '^([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]+$'; then
+                break
+            else
+                echo "This IP is not valid. Please repeat"
+            fi
+        done
+
+        read -r -p "Enter Jc value (from [Interface]):"$'\n' AWG_JC
+        read -r -p "Enter Jmin value (from [Interface]):"$'\n' AWG_JMIN
+        read -r -p "Enter Jmax value (from [Interface]):"$'\n' AWG_JMAX
+        read -r -p "Enter S1 value (from [Interface]):"$'\n' AWG_S1
+        read -r -p "Enter S2 value (from [Interface]):"$'\n' AWG_S2
+        read -r -p "Enter H1 value (from [Interface]):"$'\n' AWG_H1
+        read -r -p "Enter H2 value (from [Interface]):"$'\n' AWG_H2
+        read -r -p "Enter H3 value (from [Interface]):"$'\n' AWG_H3
+        read -r -p "Enter H4 value (from [Interface]):"$'\n' AWG_H4
+    
+        read -r -p "Enter the public key (from [Peer]):"$'\n' AWG_PUBLIC_KEY
+        read -r -p "If use PresharedKey, Enter this (from [Peer]). If your don't use leave blank:"$'\n' AWG_PRESHARED_KEY
+        read -r -p "Enter Endpoint host without port (Domain or IP) (from [Peer]):"$'\n' AWG_ENDPOINT
+
+        read -r -p "Enter Endpoint host port (from [Peer]) [51820]:"$'\n' AWG_ENDPOINT_PORT
+        AWG_ENDPOINT_PORT=${AWG_ENDPOINT_PORT:-51820}
+        if [ "$AWG_ENDPOINT_PORT" = '51820' ]; then
+            echo $AWG_ENDPOINT_PORT
+        fi
+        
+        uci set network.awg0=interface
+        uci set network.awg0.proto='amneziawg'
+        uci set network.awg0.private_key=$AWG_PRIVATE_KEY
+        uci set network.awg0.listen_port='51820'
+        uci set network.awg0.addresses=$AWG_IP
+
+        uci set network.awg0.awg_jc=$AWG_JC
+        uci set network.awg0.awg_jmin=$AWG_JMIN
+        uci set network.awg0.awg_jmax=$AWG_JMAX
+        uci set network.awg0.awg_s1=$AWG_S1
+        uci set network.awg0.awg_s2=$AWG_S2
+        uci set network.awg0.awg_h1=$AWG_H1
+        uci set network.awg0.awg_h2=$AWG_H2
+        uci set network.awg0.awg_h3=$AWG_H3
+        uci set network.awg0.awg_h4=$AWG_H4
+
+        if ! uci show network | grep -q amneziawg_awg0; then
+            uci add network amneziawg_awg0
+        fi
+
+        uci set network.@amneziawg_awg0[0]=amneziawg_awg0
+        uci set network.@amneziawg_awg0[0].name='awg0_client'
+        uci set network.@amneziawg_awg0[0].public_key=$AWG_PUBLIC_KEY
+        uci set network.@amneziawg_awg0[0].preshared_key=$AWG_PRESHARED_KEY
+        uci set network.@amneziawg_awg0[0].route_allowed_ips='0'
+        uci set network.@amneziawg_awg0[0].persistent_keepalive='25'
+        uci set network.@amneziawg_awg0[0].endpoint_host=$AWG_ENDPOINT
+        uci set network.@amneziawg_awg0[0].allowed_ips='0.0.0.0/0'
+        uci set network.@amneziawg_awg0[0].endpoint_port=$AWG_ENDPOINT_PORT
+        uci commit
+    fi
+
 }

 dnsmasqfull() {
@@ -265,14 +431,25 @@ add_zone() {
            while uci -q delete firewall.@zone[$zone_wg_id]; do :; done
        fi

+        zone_awg_id=$(uci show firewall | grep -E '@zone.*awg0' | awk -F '[][{}]' '{print $2}' | head -n 1)
+        if [ "$zone_awg_id" == 0 ] || [ "$zone_awg_id" == 1 ]; then
+            printf "\033[32;1mawg0 zone has an identifier of 0 or 1. That's not ok. Fix your firewall. lan and wan zones should have identifiers 0 and 1. \033[0m\n"
+            exit 1
+        fi
+        if [ ! -z "$zone_awg_id" ]; then
+            while uci -q delete firewall.@zone[$zone_awg_id]; do :; done
+        fi
+
        uci add firewall zone
        uci set firewall.@zone[-1].name="$TUNNEL"
        if [ "$TUNNEL" == wg ]; then
            uci set firewall.@zone[-1].network='wg0'
+        elif [ "$TUNNEL" == awg ]; then
+            uci set firewall.@zone[-1].network='awg0'
        elif [ "$TUNNEL" == singbox ] || [ "$TUNNEL" == ovpn ] || [ "$TUNNEL" == tun2socks ]; then
            uci set firewall.@zone[-1].device='tun0'
        fi
-        if [ "$TUNNEL" == wg ] || [ "$TUNNEL" == ovpn ] || [ "$TUNNEL" == tun2socks ]; then
+        if [ "$TUNNEL" == wg ] || [ "$TUNNEL" == awg ] || [ "$TUNNEL" == ovpn ] || [ "$TUNNEL" == tun2socks ]; then
            uci set firewall.@zone[-1].forward='REJECT'
            uci set firewall.@zone[-1].output='ACCEPT'
            uci set firewall.@zone[-1].input='REJECT'
@@ -299,6 +476,11 @@ add_zone() {
            remove_forwarding
        fi

+        if [[ $TUNNEL != "awg" ]]; then
+            forward_id=$(uci show firewall | grep -E "@forwarding.*dest='awg'" | awk -F '[][{}]' '{print $2}' | head -n 1)
+            remove_forwarding
+        fi
+
        if [[ $TUNNEL != "ovpn" ]]; then
            forward_id=$(uci show firewall | grep -E "@forwarding.*dest='ovpn'" | awk -F '[][{}]' '{print $2}' | head -n 1)
            remove_forwarding