Merge branch 'master' into passive_ble

https://github.com/ESP32Async/ESPAsyncWebServer/pull/329

.github/workflows/pio-dependabot.yaml

@@ -0,0 +1,22 @@
+name: PlatformIO Dependabot
+on:
+  workflow_dispatch: # option to manually trigger the workflow
+  schedule:
+    # Runs every day at 00:00
+    - cron: "0 0 * * *"
+
+permissions:
+  contents: write
+  pull-requests: write
+
+jobs:
+  dependabot:
+    runs-on: ubuntu-latest
+    name: run PlatformIO Dependabot
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v5
+      - name: run PlatformIO Dependabot
+        uses: peterus/platformio_dependabot@v1.2.0
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}

gulpfile.js

@@ -27,9 +27,6 @@ let paths = {
         'src_data/scripts/i18n.min.js',
         'src_data/scripts/lang.js',
         'src_data/scripts/utils.js'
-      ],
-      'chart.js': [
-        'src_data/scripts/chart.js'
       ]
     }
   },

lib/Equitherm/Equitherm.h

@@ -0,0 +1,63 @@
+#include <Arduino.h>
+
+#if defined(EQUITHERM_INTEGER)
+// расчёты с целыми числами
+typedef int datatype;
+#else
+// расчёты с float числами
+typedef float datatype;
+#endif
+
+class Equitherm {
+public:
+  datatype targetTemp = 0;
+  datatype indoorTemp = 0;
+  datatype outdoorTemp = 0;
+  float Kn = 0.0;
+  float Kk = 0.0;
+  float Kt = 0.0;
+
+  Equitherm() = default;
+
+  // kn, kk, kt
+  Equitherm(float new_kn, float new_kk, float new_kt) {
+    Kn = new_kn;
+    Kk = new_kk;
+    Kt = new_kt;
+  }
+
+  // лимит выходной величины
+  void setLimits(unsigned short min_output, unsigned short max_output) {
+    _minOut = min_output;
+    _maxOut = max_output;
+  }
+
+  // возвращает новое значение при вызове
+  datatype getResult() {
+    datatype output = getResultN() + getResultK() + getResultT();
+    output = constrain(output, _minOut, _maxOut);		// ограничиваем выход
+    return output;
+  }
+
+private:
+  unsigned short _minOut = 20, _maxOut = 90;
+
+  // температура контура отопления в зависимости от наружной температуры
+  datatype getResultN() {
+    float a = (-0.21 * Kn) - 0.06;     // a = -0,21k — 0,06
+    float b = (6.04 * Kn) + 1.98;      // b = 6,04k + 1,98
+    float c = (-5.06 * Kn) + 18.06;    // с = -5,06k + 18,06
+    float x = (-0.2 * outdoorTemp) + 5; // x = -0.2*t1 + 5
+    return (a * x * x) + (b * x) + c;       // Tn = ax2 + bx + c
+  }
+
+  // поправка на желаемую комнатную температуру
+  datatype getResultK() {
+    return (targetTemp - 20) * Kk;
+  }
+
+  // Расчет поправки (ошибки) термостата
+  datatype getResultT() {
+    return constrain((targetTemp - indoorTemp), -3, 3) * Kt;
+  }
+};

lib/WebServerHandlers/UpgradeHandler.h

@@ -1,6 +1,6 @@
 #include <Arduino.h>
 
-class UpgradeHandler : public RequestHandler {
+class UpgradeHandler : public AsyncWebHandler {
 public:
   enum class UpgradeType {
     FIRMWARE = 0,
@@ -12,7 +12,7 @@ public:
     NO_FILE,
     SUCCESS,
     PROHIBITED,
-    ABORTED,
+    SIZE_MISMATCH,
     ERROR_ON_START,
     ERROR_ON_WRITE,
     ERROR_ON_FINISH
@@ -22,27 +22,21 @@ public:
     UpgradeType type;
     UpgradeStatus status;
     String error;
+    size_t progress = 0;
+    size_t size = 0;
   } UpgradeResult;
 
-  typedef std::function<bool(HTTPMethod, const String&)> CanHandleCallback;
-  typedef std::function<bool(const String&)> CanUploadCallback;
-  typedef std::function<bool(UpgradeType)> BeforeUpgradeCallback;
-  typedef std::function<void(const UpgradeResult&, const UpgradeResult&)> AfterUpgradeCallback;
+  typedef std::function<bool(AsyncWebServerRequest *request, UpgradeType)> BeforeUpgradeCallback;
+  typedef std::function<void(AsyncWebServerRequest *request, const UpgradeResult&, const UpgradeResult&)> AfterUpgradeCallback;
   
-  UpgradeHandler(const char* uri) {
-    this->uri = uri;
-  }
+  UpgradeHandler(AsyncURIMatcher uri) : uri(uri) {}
 
-  UpgradeHandler* setCanHandleCallback(CanHandleCallback callback = nullptr) {
-    this->canHandleCallback = callback;
-
-    return this;
-  }
-
-  UpgradeHandler* setCanUploadCallback(CanUploadCallback callback = nullptr) {
-    this->canUploadCallback = callback;
-
-    return this;
+  bool canHandle(AsyncWebServerRequest *request) const override final {
+    if (!request->isHTTP()) {
+      return false;
+    }
+    
+    return this->uri.matches(request);
   }
 
   UpgradeHandler* setBeforeUpgradeCallback(BeforeUpgradeCallback callback = nullptr) {
@@ -57,29 +51,9 @@ public:
     return this;
   }
 
-  #if defined(ARDUINO_ARCH_ESP32)
-  bool canHandle(WebServer &server, HTTPMethod method, const String &uri) override {
-    return this->canHandle(method, uri);
-  }
-  #endif
-
-  bool canHandle(HTTPMethod method, const String& uri) override {
-    return method == HTTP_POST && uri.equals(this->uri) && (!this->canHandleCallback || this->canHandleCallback(method, uri));
-  }
-
-  #if defined(ARDUINO_ARCH_ESP32)
-  bool canUpload(WebServer &server, const String &uri) override {
-    return this->canUpload(uri);
-  }
-  #endif
-
-  bool canUpload(const String& uri) override {
-    return uri.equals(this->uri) && (!this->canUploadCallback || this->canUploadCallback(uri));
-  }
-
-  bool handle(WebServer& server, HTTPMethod method, const String& uri) override {
+  void handleRequest(AsyncWebServerRequest *request) override final {
     if (this->afterUpgradeCallback) {
-      this->afterUpgradeCallback(this->firmwareResult, this->filesystemResult);
+      this->afterUpgradeCallback(request, this->firmwareResult, this->filesystemResult);
     }
 
     this->firmwareResult.status = UpgradeStatus::NONE;
@@ -87,129 +61,147 @@ public:
 
     this->filesystemResult.status = UpgradeStatus::NONE;
     this->filesystemResult.error.clear();
-
-    return true;
   }
 
-  void upload(WebServer& server, const String& uri, HTTPUpload& upload) override {
-    UpgradeResult* result;
-    if (upload.name.equals(F("firmware"))) {
-      result = &this->firmwareResult;
+  void handleUpload(AsyncWebServerRequest *request, const String &fileName, size_t index, uint8_t *data, size_t dataLength, bool isFinal) override final {
+    UpgradeResult* result = nullptr;
 
-    } else if (upload.name.equals(F("filesystem"))) {
-      result = &this->filesystemResult;
-      
-    } else {
+    if (!request->hasParam(asyncsrv::T_name, true, true)) {
+      // Missing content-disposition 'name' parameter
       return;
     }
 
+    const auto& pName = request->getParam(asyncsrv::T_name, true, true)->value();
+    if (pName.equals("fw")) {
+      result = &this->firmwareResult;
+
+      if (!index) {
+        result->progress = 0;
+        result->size = request->hasParam("fw_size", true)
+          ? request->getParam("fw_size", true)->value().toInt()
+          : 0;
+      }
+
+    } else if (pName.equals("fs")) {
+      result = &this->filesystemResult;
+
+      if (!index) {
+        result->progress = 0;
+        result->size = request->hasParam("fs_size", true)
+          ? request->getParam("fs_size", true)->value().toInt()
+          : 0;
+      }
+
+    } else {
+      // Unknown parameter name
+      return;
+    }
+
+    // check result status
     if (result->status != UpgradeStatus::NONE) {
       return;
     }
 
-    if (this->beforeUpgradeCallback && !this->beforeUpgradeCallback(result->type)) {
+    if (this->beforeUpgradeCallback && !this->beforeUpgradeCallback(request, result->type)) {
       result->status = UpgradeStatus::PROHIBITED;
       return;
     }
 
-    if (!upload.filename.length()) {
+    if (!fileName.length()) {
       result->status = UpgradeStatus::NO_FILE;
       return;
     }
 
-    if (upload.status == UPLOAD_FILE_START) {
+    if (!index) {
       // reset
       if (Update.isRunning()) {
         Update.end(false);
         Update.clearError();
       }
 
+      // try begin
       bool begin = false;
-      #ifdef ARDUINO_ARCH_ESP8266
-      Update.runAsync(true);
-      
-      if (result->type == UpgradeType::FIRMWARE) {
-        begin = Update.begin((ESP.getFreeSketchSpace() - 0x1000) & 0xFFFFF000, U_FLASH);
-        
-      } else if (result->type == UpgradeType::FILESYSTEM) {
-        close_all_fs();
-        begin = Update.begin((size_t)FS_end - (size_t)FS_start, U_FS);
-      }
-      #elif defined(ARDUINO_ARCH_ESP32)
       if (result->type == UpgradeType::FIRMWARE) {
         begin = Update.begin(UPDATE_SIZE_UNKNOWN, U_FLASH);
         
       } else if (result->type == UpgradeType::FILESYSTEM) {
         begin = Update.begin(UPDATE_SIZE_UNKNOWN, U_SPIFFS);
       }
-      #endif
 
       if (!begin || Update.hasError()) {
         result->status = UpgradeStatus::ERROR_ON_START;
-        #ifdef ARDUINO_ARCH_ESP8266
-        result->error = Update.getErrorString();
-        #else
         result->error = Update.errorString();
-        #endif
 
-        Log.serrorln(FPSTR(L_PORTAL_OTA), F("File '%s', on start: %s"), upload.filename.c_str(), result->error.c_str());
+        Log.serrorln(FPSTR(L_PORTAL_OTA), "File '%s', on start: %s", fileName.c_str(), result->error.c_str());
         return;
       }
       
-      Log.sinfoln(FPSTR(L_PORTAL_OTA), F("File '%s', started"), upload.filename.c_str());
-
-    } else if (upload.status == UPLOAD_FILE_WRITE) {
-      if (Update.write(upload.buf, upload.currentSize) != upload.currentSize) {
+      Log.sinfoln(FPSTR(L_PORTAL_OTA), "File '%s', started", fileName.c_str());
+    }
+    
+    if (dataLength) {
+      if (Update.write(data, dataLength) != dataLength) {
         Update.end(false);
-
         result->status = UpgradeStatus::ERROR_ON_WRITE;
-        #ifdef ARDUINO_ARCH_ESP8266
-        result->error = Update.getErrorString();
-        #else
         result->error = Update.errorString();
-        #endif
 
         Log.serrorln(
-          FPSTR(L_PORTAL_OTA),
-          F("File '%s', on writing %d bytes: %s"),
-          upload.filename.c_str(), upload.totalSize, result->error.c_str()
+          FPSTR(L_PORTAL_OTA), "File '%s', on write %d bytes, %d of %d bytes",
+          fileName.c_str(),
+          dataLength,
+          result->progress + dataLength,
+          result->size
         );
-
-      } else {
-        Log.sinfoln(FPSTR(L_PORTAL_OTA), F("File '%s', writed %d bytes"), upload.filename.c_str(), upload.totalSize);
+        return;
       }
+      
+      result->progress += dataLength;
+      Log.sinfoln(
+        FPSTR(L_PORTAL_OTA), "File '%s', write %d bytes, %d of %d bytes",
+        fileName.c_str(),
+        dataLength,
+        result->progress,
+        result->size
+      );
+    }
 
-    } else if (upload.status == UPLOAD_FILE_END) {
-      if (Update.end(true)) {
-        result->status = UpgradeStatus::SUCCESS;
+    if (result->size > 0) {
+      if (result->progress > result->size || (isFinal && result->progress < result->size)) {
+        Update.end(false);
+        result->status = UpgradeStatus::SIZE_MISMATCH;
 
-        Log.sinfoln(FPSTR(L_PORTAL_OTA), F("File '%s': finish"), upload.filename.c_str());
-
-      } else {
+        Log.serrorln(
+          FPSTR(L_PORTAL_OTA), "File '%s', size mismatch: %d of %d bytes",
+          fileName.c_str(),
+          result->progress,
+          result->size
+        );
+        return;
+      }
+    }
+    
+    if (isFinal) {
+      if (!Update.end(true)) {
         result->status = UpgradeStatus::ERROR_ON_FINISH;
-        #ifdef ARDUINO_ARCH_ESP8266
-        result->error = Update.getErrorString();
-        #else
         result->error = Update.errorString();
-        #endif
 
-        Log.serrorln(FPSTR(L_PORTAL_OTA), F("File '%s', on finish: %s"), upload.filename.c_str(), result->error);
+        Log.serrorln(FPSTR(L_PORTAL_OTA), "File '%s', on finish: %s", fileName.c_str(), result->error);
+        return;
       }
 
-    } else if (upload.status == UPLOAD_FILE_ABORTED) {
-      Update.end(false);
-      result->status = UpgradeStatus::ABORTED;
-
-      Log.serrorln(FPSTR(L_PORTAL_OTA), F("File '%s': aborted"), upload.filename.c_str());
+      result->status = UpgradeStatus::SUCCESS;
+      Log.sinfoln(FPSTR(L_PORTAL_OTA), "File '%s': finish", fileName.c_str());
     }
   }
 
+  bool isRequestHandlerTrivial() const override final {
+    return false;
+  }
+
 protected:
-  CanHandleCallback canHandleCallback;
-  CanUploadCallback canUploadCallback;
   BeforeUpgradeCallback beforeUpgradeCallback;
   AfterUpgradeCallback afterUpgradeCallback;
-  const char* uri = nullptr;
+  AsyncURIMatcher uri;
 
   UpgradeResult firmwareResult{UpgradeType::FIRMWARE, UpgradeStatus::NONE};
   UpgradeResult filesystemResult{UpgradeType::FILESYSTEM, UpgradeStatus::NONE};

platformio.ini

@@ -1,379 +1,275 @@
-; PlatformIO Project Configuration File
-;
-;   Build options: build flags, source filter
-;   Upload options: custom upload port, speed and extra flags
-;   Library options: dependencies, extra library storages
-;   Advanced options: extra scripting
-;
-; Please visit documentation for the other options and examples
-; https://docs.platformio.org/page/projectconf.html
-
 [platformio]
-;extra_configs = secrets.ini
-extra_configs = secrets.default.ini
-core_dir = .pio
+;extra_configs          = secrets.ini
+extra_configs           = secrets.default.ini
+core_dir                = .pio
 
 [env]
-version = 1.6.0
-framework = arduino
-lib_deps = 
-	bblanchon/ArduinoJson@^7.4.2
-	;ihormelnyk/OpenTherm Library@^1.1.5
-	https://github.com/Laxilef/opentherm_library#esp32_timer
-	arduino-libraries/ArduinoMqttClient@^0.1.8
-	lennarthennigs/ESP Telnet@^2.2.3
-	gyverlibs/FileData@^1.0.3
-	gyverlibs/GyverPID@^3.3.2
-	gyverlibs/GyverBlinker@^1.1.1
-	https://github.com/pstolarz/Arduino-Temperature-Control-Library.git#OneWireNg
-	laxilef/TinyLogger@^1.1.1
-build_type = ${secrets.build_type}
-build_flags = 
-	-mtext-section-literals
-	-D MQTT_CLIENT_STD_FUNCTION_CALLBACK=1
-	;-D DEBUG_ESP_CORE -D DEBUG_ESP_WIFI -D DEBUG_ESP_HTTP_SERVER -D DEBUG_ESP_PORT=Serial
-	-D BUILD_VERSION='"${this.version}"'
-	-D BUILD_ENV='"$PIOENV"'
-	-D DEFAULT_SERIAL_ENABLED=${secrets.serial_enabled}
-	-D DEFAULT_SERIAL_BAUD=${secrets.serial_baud}
-	-D DEFAULT_TELNET_ENABLED=${secrets.telnet_enabled}
-	-D DEFAULT_TELNET_PORT=${secrets.telnet_port}
-	-D DEFAULT_LOG_LEVEL=${secrets.log_level}
-	-D DEFAULT_HOSTNAME='"${secrets.hostname}"'
-	-D DEFAULT_AP_SSID='"${secrets.ap_ssid}"'
-	-D DEFAULT_AP_PASSWORD='"${secrets.ap_password}"'
-	-D DEFAULT_STA_SSID='"${secrets.sta_ssid}"'
-	-D DEFAULT_STA_PASSWORD='"${secrets.sta_password}"'
-	-D DEFAULT_PORTAL_LOGIN='"${secrets.portal_login}"'
-	-D DEFAULT_PORTAL_PASSWORD='"${secrets.portal_password}"'
-	-D DEFAULT_MQTT_ENABLED=${secrets.mqtt_enabled}
-	-D DEFAULT_MQTT_SERVER='"${secrets.mqtt_server}"'
-	-D DEFAULT_MQTT_PORT=${secrets.mqtt_port}
-	-D DEFAULT_MQTT_USER='"${secrets.mqtt_user}"'
-	-D DEFAULT_MQTT_PASSWORD='"${secrets.mqtt_password}"'
-	-D DEFAULT_MQTT_PREFIX='"${secrets.mqtt_prefix}"'
-upload_speed = 921600
-monitor_speed = 115200
-;monitor_filters = direct
-monitor_filters = 
-	esp32_exception_decoder
-	esp8266_exception_decoder
-board_build.flash_mode = dio
-board_build.filesystem = littlefs
-check_tool = ; pvs-studio
-check_flags =
-;  pvs-studio:
-;    --analysis-mode=4
-;    --exclude-path=./.pio/libdeps
+version                 = 1.5.7-passiveble
+framework               = arduino
+lib_deps                = ESP32Async/AsyncTCP
+                          ;ESP32Async/ESPAsyncWebServer
+                          https://github.com/ESP32Async/ESPAsyncWebServer
+                          bblanchon/ArduinoJson@^7.4.2
+                          ;ihormelnyk/OpenTherm Library@^1.1.5
+                          https://github.com/Laxilef/opentherm_library#esp32_timer
+                          arduino-libraries/ArduinoMqttClient@^0.1.8
+                          lennarthennigs/ESP Telnet@^2.2.3
+                          gyverlibs/FileData@^1.0.3
+                          gyverlibs/GyverPID@^3.3.2
+                          gyverlibs/GyverBlinker@^1.1.1
+                          https://github.com/pstolarz/Arduino-Temperature-Control-Library.git#OneWireNg
+                          laxilef/TinyLogger@^1.1.1
+build_type              = ${secrets.build_type}
+build_flags             = -mtext-section-literals
+                          -Wno-deprecated-declarations
+                          -D MQTT_CLIENT_STD_FUNCTION_CALLBACK=1
+                          ;-D DEBUG_ESP_CORE -D DEBUG_ESP_WIFI -D DEBUG_ESP_HTTP_SERVER -D DEBUG_ESP_PORT=Serial
+                          -D BUILD_VERSION='"${this.version}"'
+                          -D BUILD_ENV='"$PIOENV"'
+                          -D CONFIG_ASYNC_TCP_STACK_SIZE=4096
+                          -D ARDUINOJSON_USE_DOUBLE=0
+                          -D ARDUINOJSON_USE_LONG_LONG=0
+                          -D DEFAULT_SERIAL_ENABLED=${secrets.serial_enabled}
+                          -D DEFAULT_SERIAL_BAUD=${secrets.serial_baud}
+                          -D DEFAULT_TELNET_ENABLED=${secrets.telnet_enabled}
+                          -D DEFAULT_TELNET_PORT=${secrets.telnet_port}
+                          -D DEFAULT_LOG_LEVEL=${secrets.log_level}
+                          -D DEFAULT_HOSTNAME='"${secrets.hostname}"'
+                          -D DEFAULT_AP_SSID='"${secrets.ap_ssid}"'
+                          -D DEFAULT_AP_PASSWORD='"${secrets.ap_password}"'
+                          -D DEFAULT_STA_SSID='"${secrets.sta_ssid}"'
+                          -D DEFAULT_STA_PASSWORD='"${secrets.sta_password}"'
+                          -D DEFAULT_PORTAL_LOGIN='"${secrets.portal_login}"'
+                          -D DEFAULT_PORTAL_PASSWORD='"${secrets.portal_password}"'
+                          -D DEFAULT_MQTT_ENABLED=${secrets.mqtt_enabled}
+                          -D DEFAULT_MQTT_SERVER='"${secrets.mqtt_server}"'
+                          -D DEFAULT_MQTT_PORT=${secrets.mqtt_port}
+                          -D DEFAULT_MQTT_USER='"${secrets.mqtt_user}"'
+                          -D DEFAULT_MQTT_PASSWORD='"${secrets.mqtt_password}"'
+                          -D DEFAULT_MQTT_PREFIX='"${secrets.mqtt_prefix}"'
+upload_speed            = 921600
+monitor_speed           = 115200
+;monitor_filters        = direct
+monitor_filters         = esp32_exception_decoder
+                          esp8266_exception_decoder
+board_build.flash_mode  = dio
+board_build.filesystem  = littlefs
+check_tool              = ;pvs-studio
+check_flags             = ;pvs-studio: --analysis-mode=4 --exclude-path=./.pio/libdeps
 
 ; Defaults
 [esp8266_defaults]
-platform = espressif8266@^4.2.1
-platform_packages = ${env.platform_packages}
-lib_deps = 
-	${env.lib_deps}
-	nrwiersma/ESP8266Scheduler@^1.2
-lib_ignore = 
-extra_scripts = 
-	post:tools/build.py
-build_type = ${env.build_type}
-build_flags = 
-	${env.build_flags}
-	-D PIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY
-	;-D PIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
-	-D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
-board_build.ldscript = eagle.flash.4m1m.ld
-check_tool = ${env.check_tool}
-check_flags = ${env.check_flags}
+platform                = espressif8266@^4.2.1
+platform_packages       = ${env.platform_packages}
+lib_deps                = ${env.lib_deps}
+                          nrwiersma/ESP8266Scheduler@^1.2
+lib_ignore              = 
+extra_scripts           = post:tools/build.py
+build_type              = ${env.build_type}
+build_flags             = ${env.build_flags}
+                          -D PIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY
+                          ;-D PIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
+                          -D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
+board_build.ldscript    = eagle.flash.4m1m.ld
+check_tool              = ${env.check_tool}
+check_flags             = ${env.check_flags}
 
 [esp32_defaults]
-;platform = espressif32@^6.7
-;platform = https://github.com/platformio/platform-espressif32.git
-;platform_packages = 
-;  framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git#3.0.5
-;  framework-arduinoespressif32-libs @ https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.1/esp32-arduino-libs-idf-release_v5.1-33fbade6.zip
-platform = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.34/platform-espressif32.zip
-platform_packages = ${env.platform_packages}
-board_build.partitions = esp32_partitions.csv
-lib_deps =
-	${env.lib_deps}
-	laxilef/ESP32Scheduler@^1.0.1
-nimble_lib = h2zero/NimBLE-Arduino@2.3.7
-lib_ignore = 
-extra_scripts = 
-	post:tools/esp32.py
-	post:tools/build.py
-build_type = ${env.build_type}
-build_flags = 
-	${env.build_flags}
-	-D CORE_DEBUG_LEVEL=0
-	-Wl,--wrap=esp_panic_handler
-check_tool = ${env.check_tool}
-check_flags = ${env.check_flags}
+platform                = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.34/platform-espressif32.zip
+platform_packages       = ${env.platform_packages}
+board_build.partitions  = esp32_partitions.csv
+lib_deps                = ${env.lib_deps}
+                          laxilef/ESP32Scheduler@^1.0.1
+nimble_lib              = https://github.com/h2zero/NimBLE-Arduino
+lib_ignore              = BluetoothSerial
+                          SimpleBLE
+                          ESP RainMaker
+                          RainMaker
+                          ESP Insights
+                          Insights
+                          Zigbee
+                          Matter
+                          OpenThread
+                          dsp
+custom_component_remove = espressif/esp_hosted
+                          espressif/esp_wifi_remote
+                          espressif/esp-dsp
+                          espressif/esp_modem
+                          espressif/esp_rainmaker
+                          espressif/rmaker_common
+                          espressif/esp_insights
+                          espressif/esp_diag_data_store
+                          espressif/esp_diagnostics
+                          espressif/libsodium
+                          espressif/esp-modbus
+                          espressif/esp-cbor
+                          espressif/esp-sr
+                          espressif/esp32-camera
+                          espressif/qrcode
+                          espressif/esp-zboss-lib
+                          espressif/esp-zigbee-lib
+                          chmorgan/esp-libhelix-mp3
+extra_scripts           = post:tools/esp32.py
+                          post:tools/build.py
+build_type              = ${env.build_type}
+build_flags             = ${env.build_flags}
+                          -D CORE_DEBUG_LEVEL=0
+                          -Wl,--wrap=esp_panic_handler
+check_tool              = ${env.check_tool}
+check_flags             = ${env.check_flags}
 
 
 ; Boards
 [env:d1_mini]
-platform = ${esp8266_defaults.platform}
-platform_packages = ${esp8266_defaults.platform_packages}
-board = d1_mini
-lib_deps = ${esp8266_defaults.lib_deps}
-lib_ignore = ${esp8266_defaults.lib_ignore}
-extra_scripts = ${esp8266_defaults.extra_scripts}
-board_build.ldscript = ${esp8266_defaults.board_build.ldscript}
-build_type = ${esp8266_defaults.build_type}
-build_flags = 
-	${esp8266_defaults.build_flags}
-	-D DEFAULT_OT_IN_GPIO=4
-	-D DEFAULT_OT_OUT_GPIO=5
-	-D DEFAULT_SENSOR_OUTDOOR_GPIO=12
-	-D DEFAULT_SENSOR_INDOOR_GPIO=14
-	-D DEFAULT_STATUS_LED_GPIO=13
-	-D DEFAULT_OT_RX_LED_GPIO=15
-check_tool = ${esp8266_defaults.check_tool}
-check_flags = ${esp8266_defaults.check_flags}
+extends                 = esp8266_defaults
+board                   = d1_mini
+build_flags             = ${esp8266_defaults.build_flags}
+                          -D DEFAULT_OT_IN_GPIO=4
+                          -D DEFAULT_OT_OUT_GPIO=5
+                          -D DEFAULT_SENSOR_OUTDOOR_GPIO=12
+                          -D DEFAULT_SENSOR_INDOOR_GPIO=14
+                          -D DEFAULT_STATUS_LED_GPIO=13
+                          -D DEFAULT_OT_RX_LED_GPIO=15
 
 [env:d1_mini_lite]
-platform = ${esp8266_defaults.platform}
-platform_packages = ${esp8266_defaults.platform_packages}
-board = d1_mini_lite
-lib_deps = ${esp8266_defaults.lib_deps}
-lib_ignore = ${esp8266_defaults.lib_ignore}
-extra_scripts = ${esp8266_defaults.extra_scripts}
-board_build.ldscript = ${esp8266_defaults.board_build.ldscript}
-build_type = ${esp8266_defaults.build_type}
-build_flags = 
-	${esp8266_defaults.build_flags}
-	-D DEFAULT_OT_IN_GPIO=4
-	-D DEFAULT_OT_OUT_GPIO=5
-	-D DEFAULT_SENSOR_OUTDOOR_GPIO=12
-	-D DEFAULT_SENSOR_INDOOR_GPIO=14
-	-D DEFAULT_STATUS_LED_GPIO=13
-	-D DEFAULT_OT_RX_LED_GPIO=15
-check_tool = ${esp8266_defaults.check_tool}
-check_flags = ${esp8266_defaults.check_flags}
+extends                 = esp8266_defaults
+board                   = d1_mini_lite
+build_flags             = ${esp8266_defaults.build_flags}
+                          -D DEFAULT_OT_IN_GPIO=4
+                          -D DEFAULT_OT_OUT_GPIO=5
+                          -D DEFAULT_SENSOR_OUTDOOR_GPIO=12
+                          -D DEFAULT_SENSOR_INDOOR_GPIO=14
+                          -D DEFAULT_STATUS_LED_GPIO=13
+                          -D DEFAULT_OT_RX_LED_GPIO=15
 
 [env:d1_mini_pro]
-platform = ${esp8266_defaults.platform}
-platform_packages = ${esp8266_defaults.platform_packages}
-board = d1_mini_pro
-lib_deps = ${esp8266_defaults.lib_deps}
-lib_ignore = ${esp8266_defaults.lib_ignore}
-extra_scripts = ${esp8266_defaults.extra_scripts}
-board_build.ldscript = ${esp8266_defaults.board_build.ldscript}
-build_type = ${esp8266_defaults.build_type}
-build_flags = 
-	${esp8266_defaults.build_flags}
-	-D DEFAULT_OT_IN_GPIO=4
-	-D DEFAULT_OT_OUT_GPIO=5
-	-D DEFAULT_SENSOR_OUTDOOR_GPIO=12
-	-D DEFAULT_SENSOR_INDOOR_GPIO=14
-	-D DEFAULT_STATUS_LED_GPIO=13
-	-D DEFAULT_OT_RX_LED_GPIO=15
-check_tool = ${esp8266_defaults.check_tool}
-check_flags = ${esp8266_defaults.check_flags}
+extends                 = esp8266_defaults
+board                   = d1_mini_pro
+build_flags             = ${esp8266_defaults.build_flags}
+                          -D DEFAULT_OT_IN_GPIO=4
+                          -D DEFAULT_OT_OUT_GPIO=5
+                          -D DEFAULT_SENSOR_OUTDOOR_GPIO=12
+                          -D DEFAULT_SENSOR_INDOOR_GPIO=14
+                          -D DEFAULT_STATUS_LED_GPIO=13
+                          -D DEFAULT_OT_RX_LED_GPIO=15
 
 [env:nodemcu_8266]
-platform = ${esp8266_defaults.platform}
-platform_packages = ${esp8266_defaults.platform_packages}
-board = nodemcuv2
-lib_deps = ${esp8266_defaults.lib_deps}
-lib_ignore = ${esp8266_defaults.lib_ignore}
-extra_scripts = ${esp8266_defaults.extra_scripts}
-board_build.ldscript = ${esp8266_defaults.board_build.ldscript}
-build_type = ${esp8266_defaults.build_type}
-build_flags = 
-	${esp8266_defaults.build_flags}
-	-D DEFAULT_OT_IN_GPIO=13
-	-D DEFAULT_OT_OUT_GPIO=15
-	-D DEFAULT_SENSOR_OUTDOOR_GPIO=12
-	-D DEFAULT_SENSOR_INDOOR_GPIO=4
-	-D DEFAULT_STATUS_LED_GPIO=2
-	-D DEFAULT_OT_RX_LED_GPIO=16
-check_tool = ${esp8266_defaults.check_tool}
-check_flags = ${esp8266_defaults.check_flags}
+extends                 = esp8266_defaults
+board                   = nodemcuv2
+build_flags             = ${esp8266_defaults.build_flags}
+                          -D DEFAULT_OT_IN_GPIO=13
+                          -D DEFAULT_OT_OUT_GPIO=15
+                          -D DEFAULT_SENSOR_OUTDOOR_GPIO=12
+                          -D DEFAULT_SENSOR_INDOOR_GPIO=4
+                          -D DEFAULT_STATUS_LED_GPIO=2
+                          -D DEFAULT_OT_RX_LED_GPIO=16
 
 [env:s2_mini]
-platform = ${esp32_defaults.platform}
-platform_packages = ${esp32_defaults.platform_packages}
-board = lolin_s2_mini
-board_build.partitions = ${esp32_defaults.board_build.partitions}
-lib_deps = ${esp32_defaults.lib_deps}
-lib_ignore = ${esp32_defaults.lib_ignore}
-extra_scripts = ${esp32_defaults.extra_scripts}
-build_unflags =
-	-DARDUINO_USB_MODE=1
-build_type = ${esp32_defaults.build_type}
-build_flags = 
-	${esp32_defaults.build_flags}
-	-D ARDUINO_USB_MODE=0
-	-D ARDUINO_USB_CDC_ON_BOOT=1
-	-D DEFAULT_OT_IN_GPIO=33
-	-D DEFAULT_OT_OUT_GPIO=35
-	-D DEFAULT_SENSOR_OUTDOOR_GPIO=9
-	-D DEFAULT_SENSOR_INDOOR_GPIO=7
-	-D DEFAULT_STATUS_LED_GPIO=11
-	-D DEFAULT_OT_RX_LED_GPIO=12
-check_tool = ${esp32_defaults.check_tool}
-check_flags = ${esp32_defaults.check_flags}
+extends                 = esp32_defaults
+board                   = lolin_s2_mini
+build_unflags           = -DARDUINO_USB_MODE=1
+build_flags             = ${esp32_defaults.build_flags}
+                          -D ARDUINO_USB_MODE=0
+                          -D ARDUINO_USB_CDC_ON_BOOT=1
+                          -D DEFAULT_OT_IN_GPIO=33
+                          -D DEFAULT_OT_OUT_GPIO=35
+                          -D DEFAULT_SENSOR_OUTDOOR_GPIO=9
+                          -D DEFAULT_SENSOR_INDOOR_GPIO=7
+                          -D DEFAULT_STATUS_LED_GPIO=11
+                          -D DEFAULT_OT_RX_LED_GPIO=12
 
-[env:s3_mini] 
-platform = ${esp32_defaults.platform}
-platform_packages = ${esp32_defaults.platform_packages}
-board = lolin_s3_mini
-board_build.partitions = ${esp32_defaults.board_build.partitions}
-lib_deps = 
-	${esp32_defaults.lib_deps}
-	${esp32_defaults.nimble_lib}
-lib_ignore = ${esp32_defaults.lib_ignore}
-extra_scripts = ${esp32_defaults.extra_scripts}
-build_unflags =
-	-DARDUINO_USB_MODE=1
-build_type = ${esp32_defaults.build_type}
-build_flags = 
-	${esp32_defaults.build_flags}
-	-D ARDUINO_USB_MODE=0
-	-D ARDUINO_USB_CDC_ON_BOOT=1
-	-D MYNEWT_VAL_BLE_EXT_ADV=1
-	-D USE_BLE=1
-	-D DEFAULT_OT_IN_GPIO=35
-	-D DEFAULT_OT_OUT_GPIO=36
-	-D DEFAULT_SENSOR_OUTDOOR_GPIO=13
-	-D DEFAULT_SENSOR_INDOOR_GPIO=12
-	-D DEFAULT_STATUS_LED_GPIO=11
-	-D DEFAULT_OT_RX_LED_GPIO=10
-check_tool = ${esp32_defaults.check_tool}
-check_flags = ${esp32_defaults.check_flags}
+[env:s3_mini]
+extends                 = esp32_defaults
+board                   = lolin_s3_mini
+lib_deps                = ${esp32_defaults.lib_deps}
+                          ${esp32_defaults.nimble_lib}
+build_unflags           = -DARDUINO_USB_MODE=1
+build_flags             = ${esp32_defaults.build_flags}
+                          -D ARDUINO_USB_MODE=0
+                          -D ARDUINO_USB_CDC_ON_BOOT=1
+                          -D USE_BLE=1
+                          -D MYNEWT_VAL_BLE_EXT_ADV=1
+                          -D DEFAULT_OT_IN_GPIO=35
+                          -D DEFAULT_OT_OUT_GPIO=36
+                          -D DEFAULT_SENSOR_OUTDOOR_GPIO=13
+                          -D DEFAULT_SENSOR_INDOOR_GPIO=12
+                          -D DEFAULT_STATUS_LED_GPIO=11
+                          -D DEFAULT_OT_RX_LED_GPIO=10
 
-[env:c3_mini] 
-platform = ${esp32_defaults.platform}
-platform_packages = ${esp32_defaults.platform_packages}
-board = lolin_c3_mini
-board_build.partitions = ${esp32_defaults.board_build.partitions}
-lib_deps = 
-	${esp32_defaults.lib_deps}
-	${esp32_defaults.nimble_lib}
-lib_ignore = ${esp32_defaults.lib_ignore}
-extra_scripts = ${esp32_defaults.extra_scripts}
-build_unflags = 
-	-mtext-section-literals
-build_type = ${esp32_defaults.build_type}
-build_flags = 
-	${esp32_defaults.build_flags}
-	-D MYNEWT_VAL_BLE_EXT_ADV=1
-	-D USE_BLE=1
-	-D DEFAULT_OT_IN_GPIO=8
-	-D DEFAULT_OT_OUT_GPIO=10
-	-D DEFAULT_SENSOR_OUTDOOR_GPIO=0
-	-D DEFAULT_SENSOR_INDOOR_GPIO=1
-	-D DEFAULT_STATUS_LED_GPIO=4
-	-D DEFAULT_OT_RX_LED_GPIO=5
-check_tool = ${esp32_defaults.check_tool}
-check_flags = ${esp32_defaults.check_flags}
+[env:c3_mini]
+extends                 = esp32_defaults
+board                   = lolin_c3_mini
+lib_deps                = ${esp32_defaults.lib_deps}
+                          ${esp32_defaults.nimble_lib}
+build_unflags           = -mtext-section-literals
+build_flags             = ${esp32_defaults.build_flags}
+                          -D USE_BLE=1
+                          -D DEFAULT_OT_IN_GPIO=8
+                          -D DEFAULT_OT_OUT_GPIO=10
+                          -D DEFAULT_SENSOR_OUTDOOR_GPIO=0
+                          -D DEFAULT_SENSOR_INDOOR_GPIO=1
+                          -D DEFAULT_STATUS_LED_GPIO=4
+                          -D DEFAULT_OT_RX_LED_GPIO=5
 
 [env:nodemcu_32]
-platform = ${esp32_defaults.platform}
-platform_packages = ${esp32_defaults.platform_packages}
-board = nodemcu-32s
-board_build.partitions = ${esp32_defaults.board_build.partitions}
-lib_deps = 
-	${esp32_defaults.lib_deps}
-	${esp32_defaults.nimble_lib}
-lib_ignore = ${esp32_defaults.lib_ignore}
-extra_scripts = ${esp32_defaults.extra_scripts}
-build_type = ${esp32_defaults.build_type}
-build_flags = 
-	${esp32_defaults.build_flags}
-	-D USE_BLE=1
-	-D DEFAULT_OT_IN_GPIO=16
-	-D DEFAULT_OT_OUT_GPIO=4
-	-D DEFAULT_SENSOR_OUTDOOR_GPIO=15
-	-D DEFAULT_SENSOR_INDOOR_GPIO=26
-	-D DEFAULT_STATUS_LED_GPIO=2
-	-D DEFAULT_OT_RX_LED_GPIO=19
-check_tool = ${esp32_defaults.check_tool}
-check_flags = ${esp32_defaults.check_flags}
+extends                 = esp32_defaults
+board                   = nodemcu-32s
+lib_deps                = ${esp32_defaults.lib_deps}
+                          ${esp32_defaults.nimble_lib}
+build_flags             = ${esp32_defaults.build_flags}
+                          -D USE_BLE=1
+                          -D DEFAULT_OT_IN_GPIO=16
+                          -D DEFAULT_OT_OUT_GPIO=4
+                          -D DEFAULT_SENSOR_OUTDOOR_GPIO=15
+                          -D DEFAULT_SENSOR_INDOOR_GPIO=26
+                          -D DEFAULT_STATUS_LED_GPIO=2
+                          -D DEFAULT_OT_RX_LED_GPIO=19
 
-[env:nodemcu_32_160mhz] 
-extends = env:nodemcu_32 
-board_build.f_cpu = 160000000L ; set frequency to 160MHz
+[env:nodemcu_32_160mhz]
+extends                 = env:nodemcu_32 
+board_build.f_cpu       = 160000000L ; set frequency to 160MHz
 
 [env:d1_mini32]
-platform = ${esp32_defaults.platform}
-platform_packages = ${esp32_defaults.platform_packages}
-board = wemos_d1_mini32
-board_build.partitions = ${esp32_defaults.board_build.partitions}
-lib_deps = 
-	${esp32_defaults.lib_deps}
-	${esp32_defaults.nimble_lib}
-lib_ignore = ${esp32_defaults.lib_ignore}
-extra_scripts = ${esp32_defaults.extra_scripts}
-build_type = ${esp32_defaults.build_type}
-build_flags = 
-	${esp32_defaults.build_flags}
-	-D USE_BLE=1
-	-D DEFAULT_OT_IN_GPIO=21
-	-D DEFAULT_OT_OUT_GPIO=22
-	-D DEFAULT_SENSOR_OUTDOOR_GPIO=12
-	-D DEFAULT_SENSOR_INDOOR_GPIO=18
-	-D DEFAULT_STATUS_LED_GPIO=2
-	-D DEFAULT_OT_RX_LED_GPIO=19
-check_tool = ${esp32_defaults.check_tool}
-check_flags = ${esp32_defaults.check_flags}
+extends                 = esp32_defaults
+board                   = wemos_d1_mini32
+lib_deps                = ${esp32_defaults.lib_deps}
+                          ${esp32_defaults.nimble_lib}
+build_flags             = ${esp32_defaults.build_flags}
+                          -D USE_BLE=1
+                          -D DEFAULT_OT_IN_GPIO=21
+                          -D DEFAULT_OT_OUT_GPIO=22
+                          -D DEFAULT_SENSOR_OUTDOOR_GPIO=12
+                          -D DEFAULT_SENSOR_INDOOR_GPIO=18
+                          -D DEFAULT_STATUS_LED_GPIO=2
+                          -D DEFAULT_OT_RX_LED_GPIO=19
 
 [env:esp32_c6]
-platform = ${esp32_defaults.platform}
-framework = arduino, espidf
-platform_packages = ${esp32_defaults.platform_packages}
-board = esp32-c6-devkitm-1
-board_build.partitions = ${esp32_defaults.board_build.partitions}
-board_build.embed_txtfiles = 
-	managed_components/espressif__esp_insights/server_certs/https_server.crt
-	managed_components/espressif__esp_rainmaker/server_certs/rmaker_mqtt_server.crt
-	managed_components/espressif__esp_rainmaker/server_certs/rmaker_claim_service_server.crt
-	managed_components/espressif__esp_rainmaker/server_certs/rmaker_ota_server.crt
-lib_deps = ${esp32_defaults.lib_deps}
-lib_ignore = 
-	${esp32_defaults.lib_ignore}
-extra_scripts = ${esp32_defaults.extra_scripts}
-build_unflags = 
-	-mtext-section-literals
-build_type = ${esp32_defaults.build_type}
-build_flags = 
-	${esp32_defaults.build_flags}
-	-D USE_BLE=1
-	-D DEFAULT_OT_IN_GPIO=15
-	-D DEFAULT_OT_OUT_GPIO=23
-	-D DEFAULT_SENSOR_OUTDOOR_GPIO=0
-	-D DEFAULT_SENSOR_INDOOR_GPIO=0
-	-D DEFAULT_STATUS_LED_GPIO=11
-	-D DEFAULT_OT_RX_LED_GPIO=10
-check_tool = ${esp32_defaults.check_tool}
-check_flags = ${esp32_defaults.check_flags}
+extends                 = esp32_defaults
+board                   = esp32-c6-devkitc-1
+lib_deps                = ${esp32_defaults.lib_deps}
+                          ${esp32_defaults.nimble_lib}
+build_unflags           = -mtext-section-literals
+build_flags             = ${esp32_defaults.build_flags}
+                          -D USE_BLE=1
+                          -D DEFAULT_OT_IN_GPIO=15
+                          -D DEFAULT_OT_OUT_GPIO=23
+                          -D DEFAULT_SENSOR_OUTDOOR_GPIO=0
+                          -D DEFAULT_SENSOR_INDOOR_GPIO=0
+                          -D DEFAULT_STATUS_LED_GPIO=11
+                          -D DEFAULT_OT_RX_LED_GPIO=10
 
-[env:otthing] 
-platform = ${esp32_defaults.platform}
-platform_packages = ${esp32_defaults.platform_packages}
-board = lolin_c3_mini
-board_build.partitions = ${esp32_defaults.board_build.partitions}
-lib_deps = 
-	${esp32_defaults.lib_deps}
-	${esp32_defaults.nimble_lib}
-lib_ignore = ${esp32_defaults.lib_ignore}
-extra_scripts = ${esp32_defaults.extra_scripts}
-build_unflags = 
-	-mtext-section-literals
-build_type = ${esp32_defaults.build_type}
-build_flags = 
-	${esp32_defaults.build_flags}
-	-D MYNEWT_VAL_BLE_EXT_ADV=1
-	-D USE_BLE=1
-	-D DEFAULT_OT_IN_GPIO=3
-	-D DEFAULT_OT_OUT_GPIO=1
-;	-D DEFAULT_SENSOR_OUTDOOR_GPIO=0
-;	-D DEFAULT_SENSOR_INDOOR_GPIO=1
-	-D DEFAULT_STATUS_LED_GPIO=8
-	-D DEFAULT_OT_RX_LED_GPIO=2
-	-D OT_BYPASS_RELAY_GPIO=20
-check_tool = ${esp32_defaults.check_tool}
-check_flags = ${esp32_defaults.check_flags}
+[env:otthing]
+extends                 = esp32_defaults
+board                   = lolin_c3_mini
+lib_deps                = ${esp32_defaults.lib_deps}
+                          ${esp32_defaults.nimble_lib}
+build_unflags           = -mtext-section-literals
+build_flags             = ${esp32_defaults.build_flags}
+                          -D USE_BLE=1
+                          -D DEFAULT_OT_IN_GPIO=3
+                          -D DEFAULT_OT_OUT_GPIO=1
+                          ;-D DEFAULT_SENSOR_OUTDOOR_GPIO=0
+                          ;-D DEFAULT_SENSOR_INDOOR_GPIO=1
+                          -D DEFAULT_STATUS_LED_GPIO=8
+                          -D DEFAULT_OT_RX_LED_GPIO=2
+                          -D OT_BYPASS_RELAY_GPIO=20

src/HaHelper.h

@@ -443,28 +443,6 @@ public:
     return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_SWITCH), F("heating_turbo")).c_str(), doc);
   }
 
-  bool publishSwitchHeatingHysteresis(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->statusTopic.c_str();
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("heating_hysteresis"));
-    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_SWITCH), F("heating_hysteresis"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = FPSTR(HA_ENTITY_CATEGORY_CONFIG);
-    doc[FPSTR(HA_NAME)] = F("Use heating hysteresis");
-    doc[FPSTR(HA_ICON)] = F("mdi:altimeter");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->settingsTopic.c_str();
-    doc[FPSTR(HA_STATE_ON)] = true;
-    doc[FPSTR(HA_STATE_OFF)] = false;
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.heating.hysteresis.enabled }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->setSettingsTopic.c_str();
-    doc[FPSTR(HA_PAYLOAD_ON)] = F("{\"heating\": {\"hysteresis\" : {\"enabled\" : true}}}");
-    doc[FPSTR(HA_PAYLOAD_OFF)] = F("{\"heating\": {\"hysteresis\" : {\"enabled\" : false}}}");
-    doc[FPSTR(HA_EXPIRE_AFTER)] = this->expireAfter;
-    doc.shrinkToFit();
-
-    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_SWITCH), F("heating_hysteresis")).c_str(), doc);
-  }
-
   bool publishInputHeatingHysteresis(UnitSystem unit = UnitSystem::METRIC, bool enabledByDefault = true) {
     JsonDocument doc;
     doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->statusTopic.c_str();
@@ -484,9 +462,9 @@ public:
     doc[FPSTR(HA_NAME)] = F("Heating hysteresis");
     doc[FPSTR(HA_ICON)] = F("mdi:altimeter");
     doc[FPSTR(HA_STATE_TOPIC)] = this->settingsTopic.c_str();
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.heating.hysteresis.value|float(0)|round(2) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.heating.hysteresis|float(0)|round(2) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->setSettingsTopic.c_str();
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"heating\": {\"hysteresis\" : {\"value\" : {{ value }}}}}");
+    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"heating\": {\"hysteresis\" : {{ value }}}}");
     doc[FPSTR(HA_MIN)] = 0;
     doc[FPSTR(HA_MAX)] = 15;
     doc[FPSTR(HA_STEP)] = 0.01f;
@@ -866,19 +844,19 @@ public:
     return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_SWITCH), F("equitherm")).c_str(), doc);
   }
 
-  bool publishInputEquithermSlope(bool enabledByDefault = true) {
+  bool publishInputEquithermFactorN(bool enabledByDefault = true) {
     JsonDocument doc;
     doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->statusTopic.c_str();
     doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_slope"));
-    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_slope"));
+    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_n"));
+    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_n"));
     doc[FPSTR(HA_ENTITY_CATEGORY)] = FPSTR(HA_ENTITY_CATEGORY_CONFIG);
-    doc[FPSTR(HA_NAME)] = F("Equitherm slope");
-    doc[FPSTR(HA_ICON)] = F("mdi:slope-uphill");
+    doc[FPSTR(HA_NAME)] = F("Equitherm factor N");
+    doc[FPSTR(HA_ICON)] = F("mdi:alpha-n-circle-outline");
     doc[FPSTR(HA_STATE_TOPIC)] = this->settingsTopic.c_str();
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.slope|float(0)|round(3) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.n_factor|float(0)|round(3) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->setSettingsTopic.c_str();
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"slope\" : {{ value }}}}");
+    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"n_factor\" : {{ value }}}}");
     doc[FPSTR(HA_MIN)] = 0.001f;
     doc[FPSTR(HA_MAX)] = 10;
     doc[FPSTR(HA_STEP)] = 0.001f;
@@ -886,80 +864,56 @@ public:
     doc[FPSTR(HA_EXPIRE_AFTER)] = this->expireAfter;
     doc.shrinkToFit();
 
-    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_slope")).c_str(), doc);
+    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_n_factor")).c_str(), doc);
   }
 
-  bool publishInputEquithermExponent(bool enabledByDefault = true) {
+  bool publishInputEquithermFactorK(bool enabledByDefault = true) {
     JsonDocument doc;
     doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->statusTopic.c_str();
     doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_exponent"));
-    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_exponent"));
+    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_k"));
+    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_k"));
     doc[FPSTR(HA_ENTITY_CATEGORY)] = FPSTR(HA_ENTITY_CATEGORY_CONFIG);
-    doc[FPSTR(HA_NAME)] = F("Equitherm exponent");
-    doc[FPSTR(HA_ICON)] = F("mdi:exponent");
+    doc[FPSTR(HA_NAME)] = F("Equitherm factor K");
+    doc[FPSTR(HA_ICON)] = F("mdi:alpha-k-circle-outline");
     doc[FPSTR(HA_STATE_TOPIC)] = this->settingsTopic.c_str();
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.exponent|float(0)|round(3) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.k_factor|float(0)|round(2) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->setSettingsTopic.c_str();
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"exponent\" : {{ value }}}}");
-    doc[FPSTR(HA_MIN)] = 0.1;
-    doc[FPSTR(HA_MAX)] = 2;
-    doc[FPSTR(HA_STEP)] = 0.001f;
-    doc[FPSTR(HA_MODE)] = FPSTR(HA_MODE_BOX);
-    doc[FPSTR(HA_EXPIRE_AFTER)] = this->expireAfter;
-    doc.shrinkToFit();
-
-    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_exponent")).c_str(), doc);
-  }
-
-  bool publishInputEquithermShift(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->statusTopic.c_str();
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_shift"));
-    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_shift"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = FPSTR(HA_ENTITY_CATEGORY_CONFIG);
-    doc[FPSTR(HA_DEVICE_CLASS)] = FPSTR(S_TEMPERATURE);
-    doc[FPSTR(HA_NAME)] = F("Equitherm shift");
-    doc[FPSTR(HA_ICON)] = F("mdi:chart-areaspline");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->settingsTopic.c_str();
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.shift|float(0)|round(2) }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->setSettingsTopic.c_str();
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"shift\" : {{ value }}}}");
-    doc[FPSTR(HA_MIN)] = -15;
-    doc[FPSTR(HA_MAX)] = 15;
+    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"k_factor\" : {{ value }}}}");
+    doc[FPSTR(HA_MIN)] = 0;
+    doc[FPSTR(HA_MAX)] = 10;
     doc[FPSTR(HA_STEP)] = 0.01f;
     doc[FPSTR(HA_MODE)] = FPSTR(HA_MODE_BOX);
     doc[FPSTR(HA_EXPIRE_AFTER)] = this->expireAfter;
     doc.shrinkToFit();
 
-    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_shift")).c_str(), doc);
+    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_k_factor")).c_str(), doc);
   }
 
-  bool publishInputEquithermTargetDiffFactor(bool enabledByDefault = true) {
+  bool publishInputEquithermFactorT(bool enabledByDefault = true) {
     JsonDocument doc;
     doc[FPSTR(HA_AVAILABILITY)][0][FPSTR(HA_TOPIC)] = this->statusTopic.c_str();
     doc[FPSTR(HA_AVAILABILITY)][1][FPSTR(HA_TOPIC)] = this->settingsTopic.c_str();
     doc[FPSTR(HA_AVAILABILITY)][1][FPSTR(HA_VALUE_TEMPLATE)] = F("{{ iif(value_json.pid.enabled, 'offline', 'online') }}");
     doc[FPSTR(HA_AVAILABILITY_MODE)] = F("all");
     doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_target_diff_factor"));
-    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_target_diff_factor"));
+    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_t"));
+    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_t"));
     doc[FPSTR(HA_ENTITY_CATEGORY)] = FPSTR(HA_ENTITY_CATEGORY_CONFIG);
-    doc[FPSTR(HA_NAME)] = F("Equitherm target diff factor");
-    doc[FPSTR(HA_ICON)] = F("mdi:chart-timeline-variant-shimmer");
+    doc[FPSTR(HA_NAME)] = F("Equitherm factor T");
+    doc[FPSTR(HA_ICON)] = F("mdi:alpha-t-circle-outline");
     doc[FPSTR(HA_STATE_TOPIC)] = this->settingsTopic.c_str();
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.targetDiffFactor|float(0)|round(3) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.t_factor|float(0)|round(2) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->setSettingsTopic.c_str();
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"targetDiffFactor\" : {{ value }}}}");
+    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"t_factor\" : {{ value }}}}");
     doc[FPSTR(HA_MIN)] = 0;
     doc[FPSTR(HA_MAX)] = 10;
-    doc[FPSTR(HA_STEP)] = 0.001f;
+    doc[FPSTR(HA_STEP)] = 0.01f;
     doc[FPSTR(HA_MODE)] = FPSTR(HA_MODE_BOX);
     doc[FPSTR(HA_EXPIRE_AFTER)] = this->expireAfter;
     doc.shrinkToFit();
 
-    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_target_diff_factor")).c_str(), doc);
+    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_t_factor")).c_str(), doc);
   }
 
 

src/MainTask.h

@@ -51,6 +51,10 @@ protected:
     return "Main";
   }
 
+  uint32_t getTaskStackSize() override {
+    return 6000;
+  }
+
   /*BaseType_t getTaskCore() override {
     return 1;
   }*/

src/MqttTask.h

@@ -486,7 +486,6 @@ protected:
   void publishHaEntities() {
     // heating
     this->haHelper->publishSwitchHeatingTurbo(false);
-    this->haHelper->publishSwitchHeatingHysteresis();
     this->haHelper->publishInputHeatingHysteresis(settings.system.unitSystem);
     this->haHelper->publishInputHeatingTurboFactor(false);
     this->haHelper->publishInputHeatingMinTemp(settings.system.unitSystem);
@@ -503,10 +502,9 @@ protected:
 
     // equitherm
     this->haHelper->publishSwitchEquitherm();
-    this->haHelper->publishInputEquithermSlope(false);
-    this->haHelper->publishInputEquithermExponent(false);
-    this->haHelper->publishInputEquithermShift(false);
-    this->haHelper->publishInputEquithermTargetDiffFactor(false);
+    this->haHelper->publishInputEquithermFactorN(false);
+    this->haHelper->publishInputEquithermFactorK(false);
+    this->haHelper->publishInputEquithermFactorT(false);
 
     // states
     this->haHelper->publishStatusState();

src/OpenThermTask.h

@@ -37,6 +37,10 @@ protected:
   const char* getTaskName() override {
     return "OpenTherm";
   }
+
+  uint32_t getTaskStackSize() override {
+    return 7500;
+  }
   
   BaseType_t getTaskCore() override {
     return 1;
@@ -171,7 +175,7 @@ protected:
     vars.master.heating.enabled = this->isReady()
       && settings.heating.enabled
       && vars.cascadeControl.input 
-      && (!vars.master.heating.blocking || settings.heating.hysteresis.action != HysteresisAction::DISABLE_HEATING)
+      && !vars.master.heating.blocking
       && !vars.master.heating.overheat;
 
     // DHW settings
@@ -1209,8 +1213,8 @@ protected:
       }
     }
 
-    // Set indoor temp for Native heating control/Always set indoor temp
-    if (settings.opentherm.options.nativeHeatingControl || settings.opentherm.options.alwaysSetIndoorTemp) {
+    // Native heating control
+    if (settings.opentherm.options.nativeHeatingControl) {
       // Converted current indoor temp
       float convertedTemp = convertTemp(vars.master.heating.indoorTemp, settings.system.unitSystem, settings.opentherm.unitSystem);
 
@@ -1237,13 +1241,10 @@ protected:
           Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set current CH2 indoor temp"));
         }
       }
-    }
 
 
-    // Native heating control
-    if (settings.opentherm.options.nativeHeatingControl) {
       // Converted target indoor temp
-      float convertedTemp = convertTemp(vars.master.heating.targetTemp, settings.system.unitSystem, settings.opentherm.unitSystem);
+      convertedTemp = convertTemp(vars.master.heating.targetTemp, settings.system.unitSystem, settings.opentherm.unitSystem);
 
       // Set target indoor temp
       if (this->needSetHeatingTemp(convertedTemp)) {

src/RegulatorTask.h

@@ -1,5 +1,7 @@
+#include <Equitherm.h>
 #include <GyverPID.h>
 
+Equitherm etRegulator;
 GyverPID pidRegulator(0, 0, 0);
 
 
@@ -19,6 +21,10 @@ protected:
   const char* getTaskName() override {
     return "Regulator";
   }
+
+  uint32_t getTaskStackSize() override {
+    return 5000;
+  }
   
   /*BaseType_t getTaskCore() override {
     return 1;
@@ -57,23 +63,12 @@ protected:
     this->turbo();
     this->hysteresis();
 
-    if (vars.master.heating.blocking && settings.heating.hysteresis.action == HysteresisAction::SET_ZERO_TARGET) {
-      vars.master.heating.targetTemp = 0.0f;
-      vars.master.heating.setpointTemp = 0.0f;
-
-      // tick if PID enabled
-      if (settings.pid.enabled) {
-        this->getHeatingSetpointTemp();
-      }
-
-    } else {
-      vars.master.heating.targetTemp = settings.heating.target;
-      vars.master.heating.setpointTemp = roundf(constrain(
-        this->getHeatingSetpointTemp(),
-        this->getHeatingMinSetpointTemp(),
-        this->getHeatingMaxSetpointTemp()
-      ), 0);
-    }
+    vars.master.heating.targetTemp = settings.heating.target;
+    vars.master.heating.setpointTemp = roundf(constrain(
+      this->getHeatingSetpointTemp(),
+      this->getHeatingMinSetpointTemp(),
+      this->getHeatingMaxSetpointTemp()
+    ), 0);
 
     Sensors::setValueByType(
       Sensors::Type::HEATING_SETPOINT_TEMP, vars.master.heating.setpointTemp,
@@ -101,15 +96,15 @@ protected:
 
   void hysteresis() {
     bool useHyst = false;
-    if (settings.heating.hysteresis.enabled && this->indoorSensorsConnected) {
+    if (settings.heating.hysteresis > 0.01f && this->indoorSensorsConnected) {
       useHyst = settings.equitherm.enabled || settings.pid.enabled || settings.opentherm.options.nativeHeatingControl;
     }
 
     if (useHyst) {
-      if (!vars.master.heating.blocking && vars.master.heating.indoorTemp - settings.heating.target + 0.0001f >= settings.heating.hysteresis.value) {
+      if (!vars.master.heating.blocking && vars.master.heating.indoorTemp - settings.heating.target + 0.0001f >= settings.heating.hysteresis) {
         vars.master.heating.blocking = true;
 
-      } else if (vars.master.heating.blocking && vars.master.heating.indoorTemp - settings.heating.target - 0.0001f <= -(settings.heating.hysteresis.value)) {
+      } else if (vars.master.heating.blocking && vars.master.heating.indoorTemp - settings.heating.target - 0.0001f <= -(settings.heating.hysteresis)) {
         vars.master.heating.blocking = false;
       }
 
@@ -155,32 +150,39 @@ protected:
 
     // if use equitherm
     if (settings.equitherm.enabled) {
-      float tempDelta = settings.heating.target - vars.master.heating.outdoorTemp;
-      float maxPoint = settings.heating.target - (
-        settings.heating.maxTemp - settings.heating.target
-      ) / settings.equitherm.slope;
+      unsigned short minTemp = settings.heating.minTemp;
+      unsigned short maxTemp = settings.heating.maxTemp;
+      float targetTemp = settings.heating.target;
+      float indoorTemp = vars.master.heating.indoorTemp;
+      float outdoorTemp = vars.master.heating.outdoorTemp;
 
-      float sf = (settings.heating.maxTemp - settings.heating.target) / pow(
-        settings.heating.target - maxPoint,
-        1.0f / settings.equitherm.exponent
-      );
-      float etResult = settings.heating.target + settings.equitherm.shift + sf * (
-        tempDelta >= 0 
-          ? pow(tempDelta, 1.0f / settings.equitherm.exponent) 
-          : -(pow(-(tempDelta), 1.0f / settings.equitherm.exponent))
-      );
-
-      // add diff
-      if (this->indoorSensorsConnected && !settings.pid.enabled && !settings.heating.turbo) {
-        etResult += constrain(
-          settings.heating.target - vars.master.heating.indoorTemp,
-          -3.0f,
-          3.0f
-        ) * settings.equitherm.targetDiffFactor;
+      if (settings.system.unitSystem == UnitSystem::IMPERIAL) {
+        minTemp = f2c(minTemp);
+        maxTemp = f2c(maxTemp);
+        targetTemp = f2c(targetTemp);
+        indoorTemp = f2c(indoorTemp);
+        outdoorTemp = f2c(outdoorTemp);
       }
 
-      // limit
-      etResult = constrain(etResult, settings.heating.minTemp, settings.heating.maxTemp);
+      if (!this->indoorSensorsConnected || settings.pid.enabled) {
+        etRegulator.Kt = 0.0f;
+        etRegulator.indoorTemp = 0.0f;
+
+      } else {
+        etRegulator.Kt = settings.heating.turbo ? 0.0f : settings.equitherm.t_factor;
+        etRegulator.indoorTemp = indoorTemp;
+      }
+
+      etRegulator.setLimits(minTemp, maxTemp);
+      etRegulator.Kn = settings.equitherm.n_factor;
+      etRegulator.Kk = settings.equitherm.k_factor;
+      etRegulator.targetTemp = targetTemp;
+      etRegulator.outdoorTemp = outdoorTemp;
+      float etResult = etRegulator.getResult();
+
+      if (settings.system.unitSystem == UnitSystem::IMPERIAL) {
+        etResult = c2f(etResult);
+      }
 
       if (fabsf(prevEtResult - etResult) > 0.09f) {
         prevEtResult = etResult;

src/Sensors.h

@@ -329,12 +329,12 @@ public:
 
   static float getMeanValueByPurpose(Purpose purpose, const ValueType valueType, bool onlyConnected = true) {
     if (settings == nullptr || results == nullptr) {
-      return 0.0f;
+      return 0;
     }
 
     uint8_t valueId = (uint8_t) valueType;
     if (!isValidValueId(valueId)) {
-      return 0.0f;
+      return 0;
     }
     
     float value = 0.0f;
@@ -363,7 +363,7 @@ public:
 
   static bool existsConnectedSensorsByPurpose(Purpose purpose) {
     if (settings == nullptr || results == nullptr) {
-      return false;
+      return 0;
     }
 
     for (uint8_t id = 0; id <= getMaxSensorId(); id++) {

src/SensorsTask.h

@@ -9,41 +9,136 @@
 extern FileData fsSensorsSettings;
 
 #if USE_BLE
-class BluetoothClientCallbacks : public NimBLEClientCallbacks {
+class BluetoothScanCallbacks : public NimBLEScanCallbacks {
 public:
-  BluetoothClientCallbacks(uint8_t sensorId) : sensorId(sensorId) {}
+  void onDiscovered(const NimBLEAdvertisedDevice* device) override {
+    auto& deviceAddress = device->getAddress();
 
-  void onConnect(NimBLEClient* pClient) {
-    auto& sSensor = Sensors::settings[this->sensorId];
+    bool found = false;
+    uint8_t sensorId;
+    for (sensorId = 0; sensorId <= Sensors::getMaxSensorId(); sensorId++) {
+      auto& sSensor = Sensors::settings[sensorId];
+      if (!sSensor.enabled || sSensor.type != Sensors::Type::BLUETOOTH || sSensor.purpose == Sensors::Purpose::NOT_CONFIGURED) {
+        continue;
+      }
 
-    Log.sinfoln(
-      FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': connected to %s"),
-      sensorId, sSensor.name, pClient->getPeerAddress().toString().c_str()
-    );
-  }
+      const auto sensorAddress = NimBLEAddress(sSensor.address, deviceAddress.getType());
+      if (sensorAddress.isNull() || sensorAddress != deviceAddress) {
+        continue;
+      }
 
-  void onDisconnect(NimBLEClient* pClient, int reason) {
-    auto& sSensor = Sensors::settings[this->sensorId];
+      found = true;
+      break;
+    }
 
-    Log.sinfoln(
-      FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': disconnected, reason %i"),
-      sensorId, sSensor.name, reason
-    );
-  }
+    if (!found) {
+      return;
+    }
 
-  void onConnectFail(NimBLEClient* pClient, int reason) {
-    auto& sSensor = Sensors::settings[this->sensorId];
+    auto& sSensor = Sensors::settings[sensorId];
+    auto& rSensor = Sensors::results[sensorId];
+    auto deviceName = device->getName();
+    auto deviceRssi = device->getRSSI();
 
-    Log.sinfoln(
-      FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': failed to connect, reason %i"),
-      sensorId, sSensor.name, reason
+    Log.straceln(
+      FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': discovered device %s, name: %s, RSSI: %hhd"),
+      sensorId, sSensor.name,
+      deviceAddress.toString().c_str(), deviceName.c_str(), deviceRssi
     );
 
-    pClient->cancelConnect();
-  }
+    if (!device->haveServiceData()) {
+      Log.straceln(
+        FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': not found service data"),
+        sensorId, sSensor.name
+      );
+      return;
+    }
 
-protected:
-  uint8_t sensorId;
+    auto serviceDataCount = device->getServiceDataCount();
+    Log.straceln(
+      FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': found %hhu service data"),
+      sensorId, sSensor.name, serviceDataCount
+    );
+
+    NimBLEUUID serviceUuid((uint16_t) 0x181A);
+    auto serviceData = device->getServiceData(serviceUuid);
+    if (!serviceData.size()) {
+      Log.straceln(
+        FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': NOT found %s env service data"),
+        sensorId, sSensor.name, serviceUuid.toString().c_str()
+      );
+      return;
+    }
+  
+    Log.straceln(
+      FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': found %s env service data"),
+      sensorId, sSensor.name, serviceUuid.toString().c_str()
+    );
+
+    float temperature, humidity;
+    uint16_t batteryMv;
+    uint8_t batteryLevel;
+
+    if (serviceData.size() == 13) {
+      // atc1441 format
+
+      // Temperature (2 bytes, big-endian)
+      temperature = (
+        (static_cast<uint8_t>(serviceData[6]) << 8) | static_cast<uint8_t>(serviceData[7])
+      ) * 0.1f;
+
+      // Humidity (1 byte)
+      humidity = static_cast<uint8_t>(serviceData[8]);
+
+      // Battery mV (2 bytes, big-endian)
+      batteryMv = (static_cast<uint8_t>(serviceData[10]) << 8) | static_cast<uint8_t>(serviceData[11]);
+
+      // Battery level (1 byte)
+      batteryLevel = static_cast<uint8_t>(serviceData[9]);
+
+    } else if (serviceData.size() == 15) {
+      // custom pvvx format
+
+      // Temperature (2 bytes, little-endian)
+      temperature = (
+        (static_cast<uint8_t>(serviceData[7]) << 8) | static_cast<uint8_t>(serviceData[6])
+      ) * 0.01f;
+
+      // Humidity (2 bytes, little-endian)
+      humidity = (
+        (static_cast<uint8_t>(serviceData[9]) << 8) | static_cast<uint8_t>(serviceData[8])
+      ) * 0.01f;
+
+      // Battery mV (2 bytes, little-endian)
+      batteryMv = (static_cast<uint8_t>(serviceData[11]) << 8) | static_cast<uint8_t>(serviceData[10]);
+
+      // Battery level (1 byte)
+      batteryLevel = static_cast<uint8_t>(serviceData[12]);
+
+    } else {
+      // unknown format
+      Log.straceln(
+        FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': unknown data format (size: %i)"),
+        sensorId, sSensor.name, serviceData.size()
+      );
+      return;
+    }
+
+    Log.straceln(
+      FPSTR(L_SENSORS_BLE),
+      F("Sensor #%hhu '%s', received temp: %.2f; humidity: %.2f, battery voltage: %hu, battery level: %hhu"),
+      sensorId, sSensor.name,
+      temperature, humidity, batteryMv, batteryLevel
+    );
+
+    // update data
+    Sensors::setValueById(sensorId, temperature, Sensors::ValueType::TEMPERATURE, true, true);
+    Sensors::setValueById(sensorId, humidity, Sensors::ValueType::HUMIDITY, true, true);
+    Sensors::setValueById(sensorId, batteryLevel, Sensors::ValueType::BATTERY, true, true);
+
+    // update rssi
+    Sensors::setValueById(sensorId, deviceRssi, Sensors::ValueType::RSSI, false, false);
+  }
 };
 #endif
 
@@ -55,6 +150,10 @@ public:
     this->dallasSearchTime.reserve(2);
     this->dallasPolling.reserve(2);
     this->dallasLastPollingTime.reserve(2);
+
+    #if USE_BLE
+    this->pBLEScanCallbacks = new BluetoothScanCallbacks();
+    #endif
   }
 
   ~SensorsTask() {
@@ -63,16 +162,17 @@ public:
     this->dallasSearchTime.clear();
     this->dallasPolling.clear();
     this->dallasLastPollingTime.clear();
+
+    #if USE_BLE
+    delete this->pBLEScanCallbacks;
+    #endif
   }
 
 protected:
-  const unsigned int disconnectedTimeout = 120000;
-  const unsigned short dallasSearchInterval = 60000;
-  const unsigned short dallasPollingInterval = 10000;
-  const unsigned short globalPollingInterval = 15000;
-  #if USE_BLE
-  const unsigned int bleSetDtInterval = 7200000;
-  #endif
+  const unsigned int disconnectedTimeout = 180000u;
+  const unsigned short dallasSearchInterval = 60000u;
+  const unsigned short dallasPollingInterval = 10000u;
+  const unsigned short globalPollingInterval = 15000u;
 
   std::unordered_map<uint8_t, OneWire> owInstances;
   std::unordered_map<uint8_t, DallasTemperature> dallasInstances;
@@ -80,9 +180,9 @@ protected:
   std::unordered_map<uint8_t, bool> dallasPolling;
   std::unordered_map<uint8_t, unsigned long> dallasLastPollingTime;
   #if USE_BLE
-  std::unordered_map<uint8_t, NimBLEClient*> bleClients;
-  std::unordered_map<uint8_t, bool> bleSubscribed;
-  std::unordered_map<uint8_t, unsigned long> bleLastSetDtTime;
+  NimBLEScan* pBLEScan = nullptr;
+  BluetoothScanCallbacks* pBLEScanCallbacks = nullptr;
+  bool activeScanBle = false;
   #endif
   unsigned long globalLastPollingTime = 0;
 
@@ -91,6 +191,10 @@ protected:
     return "Sensors";
   }
 
+  uint32_t getTaskStackSize() override {
+    return 7500;
+  }
+
   BaseType_t getTaskCore() override {
     // https://github.com/h2zero/NimBLE-Arduino/issues/676
     #if USE_BLE && defined(CONFIG_BT_NIMBLE_PINNED_TO_CORE)
@@ -131,8 +235,7 @@ protected:
       this->yield();
 
       #if USE_BLE
-      cleanBleInstances();
-      pollingBleSensors();
+      scanBleSensors();
       this->yield();
       #endif
 
@@ -444,549 +547,71 @@ protected:
   }
 
   #if USE_BLE
-  void cleanBleInstances() {
-    if (!NimBLEDevice::isInitialized()) {
-      return;
-    }
-
-    for (auto& [sensorId, pClient]: this->bleClients) {
-      if (pClient == nullptr) {
-        continue;
-      }
-
-      auto& sSensor = Sensors::settings[sensorId];
-      const auto sAddress = NimBLEAddress(sSensor.address, 0);
-
-      if (sAddress.isNull() || !sSensor.enabled || sSensor.type != Sensors::Type::BLUETOOTH || sSensor.purpose == Sensors::Purpose::NOT_CONFIGURED) {
-        Log.sinfoln(
-          FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s', deleted unused client"),
-          sensorId, sSensor.name
-        );
-
-        NimBLEDevice::deleteClient(pClient);
-        pClient = nullptr;
-      }
-    }
-  }
-
-  void pollingBleSensors() {
+  void scanBleSensors() {
     if (!Sensors::getAmountByType(Sensors::Type::BLUETOOTH, true)) {
+      if (NimBLEDevice::isInitialized()) {
+        if (this->pBLEScan != nullptr) {
+          if (this->pBLEScan->isScanning()) {
+            this->pBLEScan->stop();
+
+          } else {
+            this->pBLEScan = nullptr;
+          }
+        }
+
+        if (this->pBLEScan == nullptr) {
+          if (NimBLEDevice::deinit(true)) {
+            Log.sinfoln(FPSTR(L_SENSORS_BLE), F("Deinitialized"));
+
+          } else {
+            Log.swarningln(FPSTR(L_SENSORS_BLE), F("Unable to deinitialize!"));
+          }
+        }
+      }
+
       return;
     }
 
     if (!NimBLEDevice::isInitialized() && millis() > 5000) {
       Log.sinfoln(FPSTR(L_SENSORS_BLE), F("Initialized"));
-      BLEDevice::init("");
-      NimBLEDevice::setPower(9);
+      NimBLEDevice::init("");
+
+      #ifdef ESP_PWR_LVL_P20
+      NimBLEDevice::setPower(ESP_PWR_LVL_P20);
+      #elifdef ESP_PWR_LVL_P9
+      NimBLEDevice::setPower(ESP_PWR_LVL_P9);
+      #endif
     }
 
-    for (uint8_t sensorId = 0; sensorId <= Sensors::getMaxSensorId(); sensorId++) {
-      auto& sSensor = Sensors::settings[sensorId];
-      auto& rSensor = Sensors::results[sensorId];
-      
-      if (!sSensor.enabled || sSensor.type != Sensors::Type::BLUETOOTH || sSensor.purpose == Sensors::Purpose::NOT_CONFIGURED) {
-        continue;
-      }
+    if (this->pBLEScan == nullptr) {
+      this->pBLEScan = NimBLEDevice::getScan();
+      this->pBLEScan->setScanCallbacks(this->pBLEScanCallbacks);
+      #if MYNEWT_VAL(BLE_EXT_ADV)
+      this->pBLEScan->setPhy(NimBLEScan::Phy::SCAN_ALL);
+      #endif
+      this->pBLEScan->setDuplicateFilter(false);
+      this->pBLEScan->setMaxResults(0);
+      this->pBLEScan->setInterval(10000);
+      this->pBLEScan->setWindow(10000);
 
-      const auto address = NimBLEAddress(sSensor.address, 0);
-      if (address.isNull()) {
-        continue;
-      }
-
-      auto pClient = this->getBleClient(sensorId);
-      if (pClient == nullptr) {
-        continue;
-      }
-
-      if (pClient->getPeerAddress() != address) {
-        if (pClient->isConnected()) {
-          if (!pClient->disconnect()) {
-            continue;
-          }
-        }
-
-        pClient->setPeerAddress(address);
-      }
-
-      if (!pClient->isConnected()) {
-        this->bleSubscribed[sensorId] = false;
-        this->bleLastSetDtTime[sensorId] = 0;
-
-        if (pClient->connect(false, true, true)) {
-          Log.sinfoln(
-            FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': trying connecting to %s..."),
-            sensorId, sSensor.name, pClient->getPeerAddress().toString().c_str()
-          );
-        }
-
-        continue;
-      }
-      
-      if (!this->bleSubscribed[sensorId]) {
-        if (this->subscribeToBleDevice(sensorId, pClient)) {
-          this->bleSubscribed[sensorId] = true;
-
-        } else {
-          this->bleSubscribed[sensorId] = false;
-          pClient->disconnect();
-          continue;
-        }
-      }
-
-      // Mark connected
-      Sensors::setConnectionStatusById(sensorId, true, true);
-
-      if (!this->bleLastSetDtTime[sensorId] || millis() - this->bleLastSetDtTime[sensorId] > this->bleSetDtInterval) {
-        struct tm ti;
-        
-        if (getLocalTime(&ti)) {
-          if (this->setDateOnBleSensor(pClient, &ti)) {
-            Log.sinfoln(
-              FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s', successfully set date: %02d.%02d.%04d %02d:%02d:%02d"),
-              sensorId, sSensor.name,
-              ti.tm_mday, ti.tm_mon + 1, ti.tm_year + 1900, ti.tm_hour, ti.tm_min, ti.tm_sec
-            );
-
-          } else {
-            Log.swarningln(
-              FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s', failed set date: %02d.%02d.%04d %02d:%02d:%02d"),
-              sensorId, sSensor.name,
-              ti.tm_mday, ti.tm_mon + 1, ti.tm_year + 1900, ti.tm_hour, ti.tm_min, ti.tm_sec
-            );
-          }
-
-          this->bleLastSetDtTime[sensorId] = millis();
-        }
-      }
-    }
-  }
-
-  NimBLEClient* getBleClient(const uint8_t sensorId) {
-    if (!NimBLEDevice::isInitialized()) {
-      return nullptr;
+      Log.sinfoln(FPSTR(L_SENSORS_BLE), F("Scanning initialized"));
     }
 
-    auto& sSensor = Sensors::settings[sensorId];
-    auto& rSensor = Sensors::results[sensorId];
+    if (!this->pBLEScan->isScanning()) {
+      this->activeScanBle = !this->activeScanBle;
+      this->pBLEScan->setActiveScan(this->activeScanBle);
 
-    if (!sSensor.enabled || sSensor.type != Sensors::Type::BLUETOOTH || sSensor.purpose == Sensors::Purpose::NOT_CONFIGURED) {
-      return nullptr;
-    }
-
-    if (this->bleClients[sensorId] && this->bleClients[sensorId] != nullptr) {
-      return this->bleClients[sensorId];
-    }
-
-    auto pClient = NimBLEDevice::createClient();
-    if (pClient == nullptr) {
-      return nullptr;
-    }
-
-    //pClient->setConnectionParams(BLE_GAP_CONN_ITVL_MS(10), BLE_GAP_CONN_ITVL_MS(100), 10, 150);
-    pClient->setConnectTimeout(30000);
-    pClient->setSelfDelete(false, false);
-    pClient->setClientCallbacks(new BluetoothClientCallbacks(sensorId), true);
-
-    this->bleClients[sensorId] = pClient;
-
-    return pClient;
-  }
-
-  bool subscribeToBleDevice(const uint8_t sensorId, NimBLEClient* pClient) {
-    auto& sSensor = Sensors::settings[sensorId];
-    auto pAddress = pClient->getPeerAddress().toString();
-    
-    NimBLERemoteService* pService = nullptr;
-    NimBLERemoteCharacteristic* pChar = nullptr;
-
-    // ENV Service (0x181A)
-    NimBLEUUID serviceUuid((uint16_t) 0x181AU);
-    pService = pClient->getService(serviceUuid);
-    if (!pService) {
-      Log.straceln(
-        FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': failed to find env service (%s) on device %s"),
-        sensorId, sSensor.name, serviceUuid.toString().c_str(), pAddress.c_str()
-      );
-
-    } else {
-      Log.straceln(
-        FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': found env service (%s) on device %s"),
-        sensorId, sSensor.name, serviceUuid.toString().c_str(), pAddress.c_str()
-      );
-
-      // 0x2A6E - Notify temperature x0.01C (pvvx)
-      bool tempNotifyCreated = false;
-      if (!tempNotifyCreated) {
-        NimBLEUUID charUuid((uint16_t) 0x2A6E);
-        pChar = pService->getCharacteristic(charUuid);
-
-        if (pChar && (pChar->canNotify() || pChar->canIndicate())) {
-          Log.straceln(
-            FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': found temp char (%s) in env service on device %s"),
-            sensorId, sSensor.name, charUuid.toString().c_str(), pAddress.c_str()
-          );
-
-          pChar->unsubscribe();
-          tempNotifyCreated = pChar->subscribe(
-            pChar->canNotify(),
-            [sensorId](NimBLERemoteCharacteristic* pChar, uint8_t* pData, size_t length, bool isNotify) {
-              if (pChar == nullptr) {
-                return;
-              }
-
-              const NimBLERemoteService* pService = pChar->getRemoteService();
-              if (pService == nullptr) {
-                return;
-              }
-
-              NimBLEClient* pClient = pService->getClient();
-              if (pClient == nullptr) {
-                return;
-              }
-
-              auto& sSensor = Sensors::settings[sensorId];
-
-              if (length != 2) {
-                Log.swarningln(
-                  FPSTR(L_SENSORS_BLE),
-                  F("Sensor #%hhu '%s': invalid notification data at temp char (%s) on device %s"),
-                  sensorId,
-                  sSensor.name,
-                  pChar->getUUID().toString().c_str(),
-                  pClient->getPeerAddress().toString().c_str()
-                );
-
-                return;
-              }
-
-              float rawTemp = (pChar->getValue<int16_t>() * 0.01f);
-              Log.straceln(
-                FPSTR(L_SENSORS_BLE),
-                F("Sensor #%hhu '%s': received temp: %.2f"),
-                sensorId, sSensor.name, rawTemp
-              );
-
-              // set temp
-              Sensors::setValueById(sensorId, rawTemp, Sensors::ValueType::TEMPERATURE, true, true);
-
-              // update rssi
-              Sensors::setValueById(sensorId, pClient->getRssi(), Sensors::ValueType::RSSI, false, false);
-            }
-          );
-
-          if (tempNotifyCreated) {
-            Log.straceln(
-              FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': subscribed to temp char (%s) in env service on device %s"),
-              sensorId, sSensor.name,
-              charUuid.toString().c_str(), pAddress.c_str()
-            );
-
-          } else {
-            Log.swarningln(
-              FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': failed to subscribe to temp char (%s) in env service on device %s"),
-              sensorId, sSensor.name,
-              charUuid.toString().c_str(), pAddress.c_str()
-            );
-          }
-        }
-      }
-
-
-      // 0x2A1F - Notify temperature x0.1C (atc1441/pvvx)
-      if (!tempNotifyCreated) {
-        NimBLEUUID charUuid((uint16_t) 0x2A1F);
-        pChar = pService->getCharacteristic(charUuid);
-
-        if (pChar && (pChar->canNotify() || pChar->canIndicate())) {
-          Log.straceln(
-            FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': found temp char (%s) in env service on device %s"),
-            sensorId, sSensor.name, charUuid.toString().c_str(), pAddress.c_str()
-          );
-
-          pChar->unsubscribe();
-          tempNotifyCreated = pChar->subscribe(
-            pChar->canNotify(),
-            [sensorId](NimBLERemoteCharacteristic* pChar, uint8_t* pData, size_t length, bool isNotify) {
-              if (pChar == nullptr) {
-                return;
-              }
-
-              const NimBLERemoteService* pService = pChar->getRemoteService();
-              if (pService == nullptr) {
-                return;
-              }
-
-              NimBLEClient* pClient = pService->getClient();
-              if (pClient == nullptr) {
-                return;
-              }
-
-              auto& sSensor = Sensors::settings[sensorId];
-
-              if (length != 2) {
-                Log.swarningln(
-                  FPSTR(L_SENSORS_BLE),
-                  F("Sensor #%hhu '%s': invalid notification data at temp char (%s) on device %s"),
-                  sensorId,
-                  sSensor.name,
-                  pChar->getUUID().toString().c_str(),
-                  pClient->getPeerAddress().toString().c_str()
-                );
-
-                return;
-              }
-
-              float rawTemp = (pChar->getValue<int16_t>() * 0.1f);
-              Log.straceln(
-                FPSTR(L_SENSORS_BLE),
-                F("Sensor #%hhu '%s': received temp: %.2f"),
-                sensorId, sSensor.name, rawTemp
-              );
-
-              // set temp
-              Sensors::setValueById(sensorId, rawTemp, Sensors::ValueType::TEMPERATURE, true, true);
-
-              // update rssi
-              Sensors::setValueById(sensorId, pClient->getRssi(), Sensors::ValueType::RSSI, false, false);
-            }
-          );
-
-          if (tempNotifyCreated) {
-            Log.straceln(
-              FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': subscribed to temp char (%s) in env service on device %s"),
-              sensorId, sSensor.name,
-              charUuid.toString().c_str(), pAddress.c_str()
-            );
-
-          } else {
-            Log.swarningln(
-              FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': failed to subscribe to temp char (%s) in env service on device %s"),
-              sensorId, sSensor.name,
-              charUuid.toString().c_str(), pAddress.c_str()
-            );
-          }
-        }
-      }
-
-      if (!tempNotifyCreated) {
-        Log.swarningln(
-          FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': not found supported temp chars in env service on device %s"),
-          sensorId, sSensor.name, pAddress.c_str()
-        );
-
-        pClient->disconnect();
-        return false;
-      }
-
-
-      // 0x2A6F - Notify about humidity x0.01% (pvvx)
-      {
-        bool humidityNotifyCreated = false;
-        if (!humidityNotifyCreated) {
-          NimBLEUUID charUuid((uint16_t) 0x2A6F);
-          pChar = pService->getCharacteristic(charUuid);
-
-          if (pChar && (pChar->canNotify() || pChar->canIndicate())) {
-            Log.straceln(
-              FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': found humidity char (%s) in env service on device %s"),
-              sensorId, sSensor.name, charUuid.toString().c_str(), pAddress.c_str()
-            );
-
-            pChar->unsubscribe();
-            humidityNotifyCreated = pChar->subscribe(
-              pChar->canNotify(),
-              [sensorId](NimBLERemoteCharacteristic* pChar, uint8_t* pData, size_t length, bool isNotify) {
-                if (pChar == nullptr) {
-                  return;
-                }
-
-                const NimBLERemoteService* pService = pChar->getRemoteService();
-                if (pService == nullptr) {
-                  return;
-                }
-
-                NimBLEClient* pClient = pService->getClient();
-                if (pClient == nullptr) {
-                  return;
-                }
-
-                auto& sSensor = Sensors::settings[sensorId];
-
-                if (length != 2) {
-                  Log.swarningln(
-                    FPSTR(L_SENSORS_BLE),
-                    F("Sensor #%hhu '%s': invalid notification data at humidity char (%s) on device %s"),
-                    sensorId,
-                    sSensor.name,
-                    pChar->getUUID().toString().c_str(),
-                    pClient->getPeerAddress().toString().c_str()
-                  );
-
-                  return;
-                }
-
-                float rawHumidity = (pChar->getValue<uint16_t>() * 0.01f);
-                Log.straceln(
-                  FPSTR(L_SENSORS_BLE),
-                  F("Sensor #%hhu '%s': received humidity: %.2f"),
-                  sensorId, sSensor.name, rawHumidity
-                );
-
-                // set humidity
-                Sensors::setValueById(sensorId, rawHumidity, Sensors::ValueType::HUMIDITY, true, true);
-
-                // update rssi
-                Sensors::setValueById(sensorId, pClient->getRssi(), Sensors::ValueType::RSSI, false, false);
-              }
-            );
-
-            if (humidityNotifyCreated) {
-              Log.straceln(
-                FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': subscribed to humidity char (%s) in env service on device %s"),
-                sensorId, sSensor.name,
-                charUuid.toString().c_str(), pAddress.c_str()
-              );
-
-            } else {
-              Log.swarningln(
-                FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': failed to subscribe to humidity char (%s) in env service on device %s"),
-                sensorId, sSensor.name,
-                charUuid.toString().c_str(), pAddress.c_str()
-              );
-            }
-          }
-        }
-
-        if (!humidityNotifyCreated) {
-          Log.swarningln(
-            FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': not found supported humidity chars in env service on device %s"),
-            sensorId, sSensor.name, pAddress.c_str()
-          );
-        }
-      }
-    }
-
-
-    // Battery Service (0x180F)
-    {
-      NimBLEUUID serviceUuid((uint16_t) 0x180F);
-      pService = pClient->getService(serviceUuid);
-      if (!pService) {
-        Log.straceln(
-          FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': failed to find battery service (%s) on device %s"),
-          sensorId, sSensor.name, serviceUuid.toString().c_str(), pAddress.c_str()
+      if (this->pBLEScan->start(30000, false, false)) {
+        Log.sinfoln(
+          FPSTR(L_SENSORS_BLE),
+          F("%s scanning started"),
+          this->activeScanBle ? "Active" : "Passive"
         );
 
       } else {
-        Log.straceln(
-          FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': found battery service (%s) on device %s"),
-          sensorId, sSensor.name, serviceUuid.toString().c_str(), pAddress.c_str()
-        );
-
-        // 0x2A19 - Notify the battery charge level 0..99% (pvvx)
-        bool batteryNotifyCreated = false;
-        if (!batteryNotifyCreated) {
-          NimBLEUUID charUuid((uint16_t) 0x2A19);
-          pChar = pService->getCharacteristic(charUuid);
-
-          if (pChar && (pChar->canNotify() || pChar->canIndicate())) {
-            Log.straceln(
-              FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': found battery char (%s) in battery service on device %s"),
-              sensorId, sSensor.name, charUuid.toString().c_str(), pAddress.c_str()
-            );
-
-            pChar->unsubscribe();
-            batteryNotifyCreated = pChar->subscribe(
-              pChar->canNotify(),
-              [sensorId](NimBLERemoteCharacteristic* pChar, uint8_t* pData, size_t length, bool isNotify) {
-                if (pChar == nullptr) {
-                  return;
-                }
-
-                const NimBLERemoteService* pService = pChar->getRemoteService();
-                if (pService == nullptr) {
-                  return;
-                }
-
-                NimBLEClient* pClient = pService->getClient();
-                if (pClient == nullptr) {
-                  return;
-                }
-
-                auto& sSensor = Sensors::settings[sensorId];
-
-                if (length != 1) {
-                  Log.swarningln(
-                    FPSTR(L_SENSORS_BLE),
-                    F("Sensor #%hhu '%s': invalid notification data at battery char (%s) on device %s"),
-                    sensorId,
-                    sSensor.name,
-                    pChar->getUUID().toString().c_str(),
-                    pClient->getPeerAddress().toString().c_str()
-                  );
-
-                  return;
-                }
-
-                auto rawBattery = pChar->getValue<uint8_t>();
-                Log.straceln(
-                  FPSTR(L_SENSORS_BLE),
-                  F("Sensor #%hhu '%s': received battery: %hhu"),
-                  sensorId, sSensor.name, rawBattery
-                );
-
-                // set battery
-                Sensors::setValueById(sensorId, rawBattery, Sensors::ValueType::BATTERY, true, true);
-                
-                // update rssi
-                Sensors::setValueById(sensorId, pClient->getRssi(), Sensors::ValueType::RSSI, false, false);
-              }
-            );
-
-            if (batteryNotifyCreated) {
-              Log.straceln(
-                FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': subscribed to battery char (%s) in battery service on device %s"),
-                sensorId, sSensor.name,
-                charUuid.toString().c_str(), pAddress.c_str()
-              );
-
-            } else {
-              Log.swarningln(
-                FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': failed to subscribe to battery char (%s) in battery service on device %s"),
-                sensorId, sSensor.name,
-                charUuid.toString().c_str(), pAddress.c_str()
-              );
-            }
-          }
-        }
-
-        if (!batteryNotifyCreated) {
-          Log.swarningln(
-            FPSTR(L_SENSORS_BLE), F("Sensor #%hhu '%s': not found supported battery chars in battery service on device %s"),
-            sensorId, sSensor.name, pAddress.c_str()
-          );
-        }
+        Log.sinfoln(FPSTR(L_SENSORS_BLE), F("Unable to start scanning"));
       }
     }
-
-    return true;
-  }
-
-  bool setDateOnBleSensor(NimBLEClient* pClient, const struct tm *ptm) {
-    auto ts = mkgmtime(ptm);
-
-    uint8_t data[5] = {};
-    data[0] = 0x23;
-    data[1] = ts & 0xff;
-    data[2] = (ts >> 8) & 0xff;
-    data[3] = (ts >> 16) & 0xff;
-    data[4] = (ts >> 24) & 0xff;
-
-    return pClient->setValue(
-      NimBLEUUID((uint16_t) 0x1f10),
-      NimBLEUUID((uint16_t) 0x1f1f),
-      NimBLEAttValue(data, sizeof(data))
-    );
   }
   #endif
 

src/Settings.h

@@ -78,7 +78,6 @@ struct Settings {
       bool autoFaultReset = false;
       bool autoDiagReset = false;
       bool setDateAndTime = false;
-      bool alwaysSetIndoorTemp = true;
       bool nativeHeatingControl = false;
       bool immergasFix = false;
     } options;
@@ -104,17 +103,12 @@ struct Settings {
     bool enabled = true;
     bool turbo = false;
     float target = DEFAULT_HEATING_TARGET_TEMP;
+    float hysteresis = 0.5f;
     float turboFactor = 7.5f;
     uint8_t minTemp = DEFAULT_HEATING_MIN_TEMP;
     uint8_t maxTemp = DEFAULT_HEATING_MAX_TEMP;
     uint8_t maxModulation = 100;
 
-    struct {
-      bool enabled = true;
-      float value = 0.5f;
-      HysteresisAction action = HysteresisAction::DISABLE_HEATING;
-    } hysteresis;
-
     struct {
       uint8_t highTemp = 95;
       uint8_t lowTemp = 90;
@@ -160,10 +154,9 @@ struct Settings {
 
   struct {
     bool enabled = false;
-    float slope = 0.7f;
-    float exponent = 1.3f;
-    float shift = 0.0f;
-    float targetDiffFactor = 2.0f;
+    float n_factor = 0.7f;
+    float k_factor = 3.0f;
+    float t_factor = 2.0f;
   } equitherm;
 
   struct {

src/defines.h

@@ -163,9 +163,4 @@ enum class UnitSystem : uint8_t {
   IMPERIAL  = 1
 };
 
-enum class HysteresisAction : uint8_t {
-  DISABLE_HEATING = 0,
-  SET_ZERO_TARGET = 1
-};
-
 char buffer[255];

src/main.cpp

@@ -1,6 +1,3 @@
-#define ARDUINOJSON_USE_DOUBLE 0
-#define ARDUINOJSON_USE_LONG_LONG 0
-
 #include <Arduino.h>
 #include <ArduinoJson.h>
 #include <FileData.h>
@@ -216,7 +213,7 @@ void setup() {
   tRegulator = new RegulatorTask(true, 10000);
   Scheduler.start(tRegulator);
 
-  tPortal = new PortalTask(true, 0);
+  tPortal = new PortalTask(true, 10);
   Scheduler.start(tPortal);
 
   tMain = new MainTask(true, 100);

src/strings.h

@@ -34,11 +34,9 @@ const char L_CASCADE_OUTPUT[]                       PROGMEM = "CASCADE.OUTPUT";
 const char L_EXTPUMP[]                              PROGMEM = "EXTPUMP";
 
 
-const char S_ACTION[]                               PROGMEM = "action";
 const char S_ACTIONS[]                              PROGMEM = "actions";
 const char S_ACTIVE[]                               PROGMEM = "active";
 const char S_ADDRESS[]                              PROGMEM = "address";
-const char S_ALWAYS_SET_INDOOR_TEMP[]               PROGMEM = "alwaysSetIndoorTemp";
 const char S_ANTI_STUCK_INTERVAL[]                  PROGMEM = "antiStuckInterval";
 const char S_ANTI_STUCK_TIME[]                      PROGMEM = "antiStuckTime";
 const char S_AP[]                                   PROGMEM = "ap";
@@ -83,7 +81,6 @@ const char S_ENABLED[]                              PROGMEM = "enabled";
 const char S_ENV[]                                  PROGMEM = "env";
 const char S_EPC[]                                  PROGMEM = "epc";
 const char S_EQUITHERM[]                            PROGMEM = "equitherm";
-const char S_EXPONENT[]                             PROGMEM = "exponent";
 const char S_EXTERNAL_PUMP[]                        PROGMEM = "externalPump";
 const char S_FACTOR[]                               PROGMEM = "factor";
 const char S_FAULT[]                                PROGMEM = "fault";
@@ -120,6 +117,7 @@ const char S_INVERT_STATE[]                         PROGMEM = "invertState";
 const char S_IP[]                                   PROGMEM = "ip";
 const char S_I_FACTOR[]                             PROGMEM = "i_factor";
 const char S_I_MULTIPLIER[]                         PROGMEM = "i_multiplier";
+const char S_K_FACTOR[]                             PROGMEM = "k_factor";
 const char S_LOGIN[]                                PROGMEM = "login";
 const char S_LOG_LEVEL[]                            PROGMEM = "logLevel";
 const char S_LOW_TEMP[]                             PROGMEM = "lowTemp";
@@ -145,6 +143,7 @@ const char S_NAME[]                                 PROGMEM = "name";
 const char S_NATIVE_HEATING_CONTROL[]               PROGMEM = "nativeHeatingControl";
 const char S_NETWORK[]                              PROGMEM = "network";
 const char S_NTP[]                                  PROGMEM = "ntp";
+const char S_N_FACTOR[]                             PROGMEM = "n_factor";
 const char S_OFFSET[]                               PROGMEM = "offset";
 const char S_ON_ENABLED_HEATING[]                   PROGMEM = "onEnabledHeating";
 const char S_ON_FAULT[]                             PROGMEM = "onFault";
@@ -165,6 +164,7 @@ const char S_POWER[]                                PROGMEM = "power";
 const char S_PREFIX[]                               PROGMEM = "prefix";
 const char S_PROTOCOL_VERSION[]                     PROGMEM = "protocolVersion";
 const char S_PURPOSE[]                              PROGMEM = "purpose";
+const char S_PSRAM[]                                PROGMEM = "psram";
 const char S_P_FACTOR[]                             PROGMEM = "p_factor";
 const char S_P_MULTIPLIER[]                         PROGMEM = "p_multiplier";
 const char S_REAL_SIZE[]                            PROGMEM = "realSize";
@@ -183,11 +183,9 @@ const char S_SERIAL[]                               PROGMEM = "serial";
 const char S_SERVER[]                               PROGMEM = "server";
 const char S_SETTINGS[]                             PROGMEM = "settings";
 const char S_SET_DATE_AND_TIME[]                    PROGMEM = "setDateAndTime";
-const char S_SHIFT[]                                PROGMEM = "shift";
 const char S_SIGNAL_QUALITY[]                       PROGMEM = "signalQuality";
 const char S_SIZE[]                                 PROGMEM = "size";
 const char S_SLAVE[]                                PROGMEM = "slave";
-const char S_SLOPE[]                                PROGMEM = "slope";
 const char S_SSID[]                                 PROGMEM = "ssid";
 const char S_STA[]                                  PROGMEM = "sta";
 const char S_STATE[]                                PROGMEM = "state";
@@ -199,7 +197,6 @@ const char S_SUBNET[]                               PROGMEM = "subnet";
 const char S_SUMMER_WINTER_MODE[]                   PROGMEM = "summerWinterMode";
 const char S_SYSTEM[]                               PROGMEM = "system";
 const char S_TARGET[]                               PROGMEM = "target";
-const char S_TARGET_DIFF_FACTOR[]                   PROGMEM = "targetDiffFactor";
 const char S_TARGET_TEMP[]                          PROGMEM = "targetTemp";
 const char S_TELNET[]                               PROGMEM = "telnet";
 const char S_TEMPERATURE[]                          PROGMEM = "temperature";
@@ -212,6 +209,7 @@ const char S_TRESHOLD_TIME[]                        PROGMEM = "tresholdTime";
 const char S_TURBO[]                                PROGMEM = "turbo";
 const char S_TURBO_FACTOR[]                         PROGMEM = "turboFactor";
 const char S_TYPE[]                                 PROGMEM = "type";
+const char S_T_FACTOR[]                             PROGMEM = "t_factor";
 const char S_UNIT_SYSTEM[]                          PROGMEM = "unitSystem";
 const char S_UPTIME[]                               PROGMEM = "uptime";
 const char S_USE[]                                  PROGMEM = "use";

src/utils.h

@@ -468,7 +468,6 @@ void settingsToJson(const Settings& src, JsonVariant dst, bool safe = false) {
     otOptions[FPSTR(S_AUTO_FAULT_RESET)] = src.opentherm.options.autoFaultReset;
     otOptions[FPSTR(S_AUTO_DIAG_RESET)] = src.opentherm.options.autoDiagReset;
     otOptions[FPSTR(S_SET_DATE_AND_TIME)] = src.opentherm.options.setDateAndTime;
-    otOptions[FPSTR(S_ALWAYS_SET_INDOOR_TEMP)] = src.opentherm.options.alwaysSetIndoorTemp;
     otOptions[FPSTR(S_NATIVE_HEATING_CONTROL)] = src.opentherm.options.nativeHeatingControl;
     otOptions[FPSTR(S_IMMERGAS_FIX)] = src.opentherm.options.immergasFix;
 
@@ -491,9 +490,7 @@ void settingsToJson(const Settings& src, JsonVariant dst, bool safe = false) {
   heating[FPSTR(S_ENABLED)] = src.heating.enabled;
   heating[FPSTR(S_TURBO)] = src.heating.turbo;
   heating[FPSTR(S_TARGET)] = roundf(src.heating.target, 2);
-  heating[FPSTR(S_HYSTERESIS)][FPSTR(S_ENABLED)] = src.heating.hysteresis.enabled;
-  heating[FPSTR(S_HYSTERESIS)][FPSTR(S_VALUE)] = roundf(src.heating.hysteresis.value, 3);
-  heating[FPSTR(S_HYSTERESIS)][FPSTR(S_ACTION)] = static_cast<uint8_t>(src.heating.hysteresis.action);
+  heating[FPSTR(S_HYSTERESIS)] = roundf(src.heating.hysteresis, 3);
   heating[FPSTR(S_TURBO_FACTOR)] = roundf(src.heating.turboFactor, 3);
   heating[FPSTR(S_MIN_TEMP)] = src.heating.minTemp;
   heating[FPSTR(S_MAX_TEMP)] = src.heating.maxTemp;
@@ -520,10 +517,9 @@ void settingsToJson(const Settings& src, JsonVariant dst, bool safe = false) {
 
   auto equitherm = dst[FPSTR(S_EQUITHERM)].to<JsonObject>();
   equitherm[FPSTR(S_ENABLED)] = src.equitherm.enabled;
-  equitherm[FPSTR(S_SLOPE)] = roundf(src.equitherm.slope, 3);
-  equitherm[FPSTR(S_EXPONENT)] = roundf(src.equitherm.exponent, 3);
-  equitherm[FPSTR(S_SHIFT)] = roundf(src.equitherm.shift, 2);
-  equitherm[FPSTR(S_TARGET_DIFF_FACTOR)] = roundf(src.equitherm.targetDiffFactor, 3);
+  equitherm[FPSTR(S_N_FACTOR)] = roundf(src.equitherm.n_factor, 3);
+  equitherm[FPSTR(S_K_FACTOR)] = roundf(src.equitherm.k_factor, 3);
+  equitherm[FPSTR(S_T_FACTOR)] = roundf(src.equitherm.t_factor, 3);
 
   auto pid = dst[FPSTR(S_PID)].to<JsonObject>();
   pid[FPSTR(S_ENABLED)] = src.pid.enabled;
@@ -1004,15 +1000,6 @@ bool jsonToSettings(const JsonVariantConst src, Settings& dst, bool safe = false
       }
     }
 
-    if (src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_ALWAYS_SET_INDOOR_TEMP)].is<bool>()) {
-      bool value = src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_ALWAYS_SET_INDOOR_TEMP)].as<bool>();
-
-      if (value != dst.opentherm.options.alwaysSetIndoorTemp) {
-        dst.opentherm.options.alwaysSetIndoorTemp = value;
-        changed = true;
-      }
-    }
-
     if (src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_NATIVE_HEATING_CONTROL)].is<bool>()) {
       bool value = src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_NATIVE_HEATING_CONTROL)].as<bool>();
 
@@ -1140,38 +1127,29 @@ bool jsonToSettings(const JsonVariantConst src, Settings& dst, bool safe = false
     }
   }
 
-  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_SLOPE)].isNull()) {
-    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_SLOPE)].as<float>();
+  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_N_FACTOR)].isNull()) {
+    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_N_FACTOR)].as<float>();
 
-    if (value > 0.0f && value <= 10.0f && fabsf(value - dst.equitherm.slope) > 0.0001f) {
-      dst.equitherm.slope = roundf(value, 3);
+    if (value > 0 && value <= 10 && fabsf(value - dst.equitherm.n_factor) > 0.0001f) {
+      dst.equitherm.n_factor = roundf(value, 3);
       changed = true;
     }
   }
 
-  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_EXPONENT)].isNull()) {
-    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_EXPONENT)].as<float>();
+  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_K_FACTOR)].isNull()) {
+    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_K_FACTOR)].as<float>();
 
-    if (value > 0.0f && value <= 2.0f && fabsf(value - dst.equitherm.exponent) > 0.0001f) {
-      dst.equitherm.exponent = roundf(value, 3);
+    if (value >= 0 && value <= 10 && fabsf(value - dst.equitherm.k_factor) > 0.0001f) {
+      dst.equitherm.k_factor = roundf(value, 3);
       changed = true;
     }
   }
 
-  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_SHIFT)].isNull()) {
-    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_SHIFT)].as<float>();
+  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_T_FACTOR)].isNull()) {
+    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_T_FACTOR)].as<float>();
 
-    if (value >= -15.0f && value <= 15.0f && fabsf(value - dst.equitherm.shift) > 0.0001f) {
-      dst.equitherm.shift = roundf(value, 2);
-      changed = true;
-    }
-  }
-
-  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_TARGET_DIFF_FACTOR)].isNull()) {
-    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_TARGET_DIFF_FACTOR)].as<float>();
-
-    if (value >= 0.0f && value <= 10.0f && fabsf(value - dst.equitherm.targetDiffFactor) > 0.0001f) {
-      dst.equitherm.targetDiffFactor = roundf(value, 3);
+    if (value >= 0 && value <= 10 && fabsf(value - dst.equitherm.t_factor) > 0.0001f) {
+      dst.equitherm.t_factor = roundf(value, 3);
       changed = true;
     }
   }
@@ -1326,41 +1304,15 @@ bool jsonToSettings(const JsonVariantConst src, Settings& dst, bool safe = false
     }
   }
 
-  if (src[FPSTR(S_HEATING)][FPSTR(S_HYSTERESIS)][FPSTR(S_ENABLED)].is<bool>()) {
-    bool value = src[FPSTR(S_HEATING)][FPSTR(S_HYSTERESIS)][FPSTR(S_ENABLED)].as<bool>();
+  if (!src[FPSTR(S_HEATING)][FPSTR(S_HYSTERESIS)].isNull()) {
+    float value = src[FPSTR(S_HEATING)][FPSTR(S_HYSTERESIS)].as<float>();
 
-    if (value != dst.heating.hysteresis.enabled) {
-      dst.heating.hysteresis.enabled = value;
+    if (value >= 0.0f && value <= 15.0f && fabsf(value - dst.heating.hysteresis) > 0.0001f) {
+      dst.heating.hysteresis = roundf(value, 2);
       changed = true;
     }
   }
 
-  if (!src[FPSTR(S_HEATING)][FPSTR(S_HYSTERESIS)][FPSTR(S_VALUE)].isNull()) {
-    float value = src[FPSTR(S_HEATING)][FPSTR(S_HYSTERESIS)][FPSTR(S_VALUE)].as<float>();
-
-    if (value >= 0.0f && value <= 15.0f && fabsf(value - dst.heating.hysteresis.value) > 0.0001f) {
-      dst.heating.hysteresis.value = roundf(value, 2);
-      changed = true;
-    }
-  }
-
-  if (!src[FPSTR(S_HEATING)][FPSTR(S_HYSTERESIS)][FPSTR(S_ACTION)].isNull()) {
-    uint8_t value = src[FPSTR(S_HEATING)][FPSTR(S_HYSTERESIS)][FPSTR(S_ACTION)].as<uint8_t>();
-
-    switch (value) {
-      case static_cast<uint8_t>(HysteresisAction::DISABLE_HEATING):
-      case static_cast<uint8_t>(HysteresisAction::SET_ZERO_TARGET):
-        if (static_cast<uint8_t>(dst.heating.hysteresis.action) != value) {
-         dst.heating.hysteresis.action = static_cast<HysteresisAction>(value);
-          changed = true;
-        }
-        break;
-
-      default:
-        break;
-    }
-  }
-
   if (!src[FPSTR(S_HEATING)][FPSTR(S_TURBO_FACTOR)].isNull()) {
     float value = src[FPSTR(S_HEATING)][FPSTR(S_TURBO_FACTOR)].as<float>();
 

src_data/locales/cn.json

@@ -356,16 +356,7 @@
       },
 
       "heating": {
-        "hyst": {
-          "title": "滞回",
-          "desc": "滞回有助于维持设定的室内温度（在使用«Equitherm»和/或«PID»时）。强制禁用加热当<code>current indoor > target + value</code>，启用加热当<code>current indoor < (target - value)</code>。",
-          "value": "值 <small>(以度为单位)</small>",
-          "action": {
-            "title": "行动",
-            "disableHeating": "禁用加热",
-            "set0target": "设置空目标"
-          }
-        },
+        "hyst": "滞后值<small>(单位：度)</small>",
         "turboFactor": "Turbo 模式系数"
       },
 
@@ -380,26 +371,11 @@
       },
 
       "equitherm": {
-        "slope": {
-          "title": "斜率",
-          "note": "热损失补偿。主要调谐参数。"
-        },
-        "exponent": {
-          "title": "指数",
-          "note": "散热器效率。典型值：<code>1.1</code> - 地板采暖，<code>1.2</code> - 铸铁，<code>1.3</code> - 面板散热器，<code>1.4</code> - 对流器。"
-        },
-        "shift": {
-          "title": "偏移",
-          "note": "补偿额外热损失（例如，在管道中）或额外热源。"
-        },
-        "targetDiffFactor": {
-          "title": "T 因子",
-          "note": "如果启用 PID，则不使用。将目标和当前室内温度之间的差值添加到设定点：<code>setpoint = setpoint + ((target - indoor) * T)</code>。"
-        },
-        "chart": {
-          "targetTemp": "目标室内温度",
-          "setpointTemp": "热载体温度",
-          "outdoorTemp": "室外温度"
+        "n": "N 系数",
+        "k": "K 系数",
+        "t": {
+          "title": "T 系数",
+          "note": "启用PID时此参数无效"
         }
       },
 

src_data/locales/en.json

@@ -356,16 +356,7 @@
       },
 
       "heating": {
-        "hyst": {
-          "title": "Hysteresis",
-          "desc": "Hysteresis is useful for maintaining a set indoor temp (when using «Equitherm» and/or «PID»). Forces disable heating when <code>current indoor > target + value</code> and enable heating when <code>current indoor < (target - value)</code>.",
-          "value": "Value <small>(in degrees)</small>",
-          "action": {
-            "title": "Action",
-            "disableHeating": "Disable heating",
-            "set0target": "Set null target"
-          }
-        },
+        "hyst": "Hysteresis <small>(in degrees)</small>",
         "turboFactor": "Turbo mode coeff."
       },
 
@@ -380,26 +371,11 @@
       },
 
       "equitherm": {
-        "slope": {
-          "title": "Slope",
-          "note": "Heat loss compensation. Main tuning parameter."
-        },
-        "exponent": {
-          "title": "Exponent",
-          "note": "Radiator efficiency.  Typical values: <code>1.1</code> - Floor heating, <code>1.2</code> - Cast iron, <code>1.3</code> - Panel radiators, <code>1.4</code> - Convectors."
-        },
-        "shift": {
-          "title": "Shift",
-          "note": "Compensates for additional heat losses (e.g., in pipes) or extra heat sources."
-        },
-        "targetDiffFactor": {
+        "n": "N factor",
+        "k": "K factor",
+        "t": {
           "title": "T factor",
-          "note": "Not used if PID is enabled. Adds to the setpoint the difference between the target and current indoor temp: <code>setpoint = setpoint + ((target - indoor) * T)</code>."
-        },
-        "chart": {
-          "targetTemp": "Target indoor temperature",
-          "setpointTemp": "Heat carrier temperature",
-          "outdoorTemp": "Outdoor temperature"
+          "note": "Not used if PID is enabled"
         }
       },
 
@@ -457,7 +433,6 @@
           "autoFaultReset": "Auto fault reset <small>(not recommended!)</small>",
           "autoDiagReset": "Auto diag reset <small>(not recommended!)</small>",
           "setDateAndTime": "Set date & time on boiler",
-          "alwaysSetIndoorTemp": "Always set indoor temperature",
           "immergasFix": "Fix for Immergas boilers"
         },
 

src_data/locales/it.json

@@ -356,16 +356,7 @@
       },
 
       "heating": {
-        "hyst": {
-          "title": "Isteresi",
-          "desc": "L'isteresi è utile per mantenere una temperatura interna impostata (quando si utilizza «Equitherm» e/o «PID»). Forza la disabilitazione del riscaldamento quando <code>current indoor > target + value</code> e abilita il riscaldamento quando <code>current indoor < (target - value)</code>.",
-          "value": "Valore <small>(in gradi)</small>",
-          "action": {
-            "title": "Azione",
-            "disableHeating": "Disabilita riscaldamento",
-            "set0target": "Imposta target nullo"
-          }
-        },
+        "hyst": "Isteresi <small>(in gradi)</small>",
         "turboFactor": "Turbo mode coeff."
       },
 
@@ -380,26 +371,11 @@
       },
 
       "equitherm": {
-        "slope": {
-          "title": "Pendenza",
-          "note": "Compensazione della perdita di calore. Parametro di regolazione principale."
-        },
-        "exponent": {
-          "title": "Esponente",
-          "note": "Efficienza del radiatore. Valori tipici: <code>1.1</code> - Riscaldamento a pavimento, <code>1.2</code> - Ghisa, <code>1.3</code> - Radiatori a pannello, <code>1.4</code> - Convettori."
-        },
-        "shift": {
-          "title": "Spostamento",
-          "note": "Compensa perdite di calore aggiuntive (ad es., nelle tubature) o fonti di calore extra."
-        },
-        "targetDiffFactor": {
+        "n": "Fattore N",
+        "k": "Fattore K",
+        "t": {
           "title": "Fattore T",
-          "note": "Non utilizzato se PID è abilitato. Aggiunge al setpoint la differenza tra la temperatura target e quella interna attuale: <code>setpoint = setpoint + ((target - indoor) * T)</code>."
-        },
-        "chart": {
-          "targetTemp": "Temperatura interna target",
-          "setpointTemp": "Temperatura del vettore termico",
-          "outdoorTemp": "Temperatura esterna"
+          "note": "Non usato se PID è attivato"
         }
       },
 

src_data/locales/nl.json

@@ -327,16 +327,7 @@
         }
       },
       "heating": {
-        "hyst": {
-          "title": "Hysterese",
-          "desc": "Hysterese is nuttig voor het handhaven van een ingestelde binnentemperatuur (bij gebruik van «Equitherm» en/of «PID»). Forceert uitschakelen van verwarming wanneer <code>current indoor > target + value</code> en inschakelen van verwarming wanneer <code>current indoor < (target - value)</code>.",
-          "value": "Waarde <small>(in graden)</small>",
-          "action": {
-            "title": "Actie",
-            "disableHeating": "Verwarming uitschakelen",
-            "set0target": "Stel null target in"
-          }
-        },
+        "hyst": "Hysterese <small>(in graden)</small>",
         "turboFactor": "Turbomodus coëff."
       },
       "emergency": {
@@ -348,26 +339,11 @@
         "treshold": "Drempeltijd <small>(sec)</small>"
       },
       "equitherm": {
-        "slope": {
-          "title": "Helling",
-          "note": "Compensatie voor warmteverlies. Hoofdafstelparameter."
-        },
-        "exponent": {
-          "title": "Exponent",
-          "note": "Radiator efficiëntie. Typische waarden: <code>1.1</code> - Vloerverwarming, <code>1.2</code> - Gietijzer, <code>1.3</code> - Paneelradiatoren, <code>1.4</code> - Convectors."
-        },
-        "shift": {
-          "title": "Verschuiving",
-          "note": "Compenseert voor extra warmteverliezen (bijv. in leidingen) of extra warmtebronnen."
-        },
-        "targetDiffFactor": {
-          "title": "T factor",
-          "note": "Niet gebruikt als PID is ingeschakeld. Voegt aan de setpoint de verschil tussen de target en huidige binnentemperatuur toe: <code>setpoint = setpoint + ((target - indoor) * T)</code>."
-        },
-        "chart": {
-          "targetTemp": "Doel binnentemperatuur",
-          "setpointTemp": "Warmtedrager temperatuur",
-          "outdoorTemp": "Buitentemperatuur"
+        "n": "N-factor",
+        "k": "K-factor",
+        "t": {
+          "title": "T-factor",
+          "note": "Niet gebruikt als PID is ingeschakeld"
         }
       },
       "pid": {

src_data/locales/ru.json

@@ -356,16 +356,7 @@
       },
 
       "heating": {
-        "hyst": {
-          "title": "Гистерезис",
-          "desc": "Гистерезис полезен для поддержания заданной внутр. темп. (при использовании «ПЗА» и/или «ПИД»). Принудительно откл. отопление, когда <code>current indoor > target + value</code>, и вкл. отопление, когда <code>current indoor < (target - value)</code>.",
-          "value": "Значение <small>(в градусах)</small>",
-          "action": {
-            "title": "Действие",
-            "disableHeating": "Отключить отопление",
-            "set0target": "Установить 0 в качестве целевой темп."
-          }
-        },
+        "hyst": "Гистерезис <small>(в градусах)</small>",
         "turboFactor": "Коэфф. турбо режима"
       },
 
@@ -380,26 +371,11 @@
       },
 
       "equitherm": {
-        "slope": {
-          "title": "Наклон",
-          "note": "Компенсация теплопотерь. Основной параметр настройки."
-        },
-        "exponent": {
-          "title": "Экспонента",
-          "note": "Эффективность радиатора. Типичные значения: <code>1.1</code> - Тёплый пол, <code>1.2</code> - Чугунные радиаторы, <code>1.3</code> - Панельные радиаторы, <code>1.4</code> - Конвекторы."
-        },
-        "shift": {
-          "title": "Смещение",
-          "note": "Компенсирует дополнительные теплопотери (например, в трубах) или дополнительные источники тепла."
-        },
-        "targetDiffFactor": {
+        "n": "Коэффициент N",
+        "k": "Коэффициент K",
+        "t": {
           "title": "Коэффициент T",
-          "note": "Не используется, если ПИД включен. Добавляет разницу между целевой и текущей температурой в помещении: <code>setpoint = setpoint + ((target - indoor) * T)</code>."
-        },
-        "chart": {
-          "targetTemp": "Целевая внутренняя температура",
-          "setpointTemp": "Температура теплоносителя",
-          "outdoorTemp": "Наружная температура"
+          "note": "Не используется, если ПИД включен"
         }
       },
 

src_data/pages/sensors.html

@@ -241,9 +241,7 @@
               setCheckboxValue("[name='filtering']", data.filtering, sensorForm);
               setInputValue("[name='filteringFactor']", data.filteringFactor, {}, sensorForm);
 
-              setTimeout(() => {
-                sensorForm.querySelector("[name='type']").dispatchEvent(new Event("change"));
-              }, 10);
+              sensorForm.querySelector("[name='type']").dispatchEvent(new Event("change"));
 
               setBusy(".form-busy", "form", false, sensorNode);
             };

src_data/pages/settings.html

@@ -106,7 +106,7 @@
                       <option disabled selected data-i18n>settings.system.ntp.timezonePresets</option>
                     </select>
                   </div>
-                </label>
+                  </label>
               </fieldset>
 
               <fieldset>
@@ -194,47 +194,20 @@
 
               <div class="grid">
                 <label>
-                  <span data-i18n>settings.heating.turboFactor</span>
-                  <input type="number" inputmode="decimal" name="heating[turboFactor]" min="1.5" max="10" step="0.1" required>
+                  <span data-i18n>settings.heating.hyst</span>
+                  <input type="number" inputmode="decimal" name="heating[hysteresis]" min="0" max="5" step="0.05" required>
                 </label>
 
                 <label>
-                  <span data-i18n>settings.maxModulation</span>
-                  <input type="number" inputmode="numeric" name="heating[maxModulation]" min="1" max="100" step="1" required>
+                  <span data-i18n>settings.heating.turboFactor</span>
+                  <input type="number" inputmode="decimal" name="heating[turboFactor]" min="1.5" max="10" step="0.1" required>
                 </label>
               </div>
 
-              <hr />
-
-              <details>
-                <summary><b data-i18n>settings.heating.hyst.title</b></summary>
-                
-                <div>
-                  <fieldset>
-                    <label>
-                      <input type="checkbox" name="heating[hysteresis][enabled]" value="true">
-                      <span data-i18n>settings.enable</span>
-                    </label>
-                  </fieldset>
-
-                  <div class="grid">
-                    <label>
-                      <span data-i18n>settings.heating.hyst.value</span>
-                      <input type="number" inputmode="decimal" name="heating[hysteresis][value]" min="0" max="5" step="0.05" required>
-                    </label>
-
-                    <label>
-                      <span data-i18n>settings.heating.hyst.action.title</span>
-                      <select name="heating[hysteresis][action]">
-                        <option value="0" data-i18n>settings.heating.hyst.action.disableHeating</option>
-                        <option value="1" data-i18n>settings.heating.hyst.action.set0target</option>
-                      </select>
-                    </label>
-                  </div>
-                </div>
-
-                <small data-i18n>settings.heating.hyst.desc</small>
-              </details>
+              <label>
+                <span data-i18n>settings.maxModulation</span>
+                <input type="number" inputmode="numeric" name="heating[maxModulation]" min="1" max="100" step="1" required>
+              </label>
 
               <hr />
 
@@ -381,44 +354,21 @@
                 </label>
               </fieldset>
 
-              <div>
-                <div>
-                  <canvas id="etChart"></canvas>
-                </div>
-
-                <label>
-                  <div>
-                    <span data-i18n>settings.equitherm.chart.targetTemp</span>: <b class="etChartTargetTempValue"></b>°
-                  </div>
-                  <input class="etChartTargetTemp" type="range" value="0" min="0" max="0" step="0.5">
-                </label>
-              </div>
-
               <div class="grid">
                 <label>
-                  <span data-i18n>settings.equitherm.slope.title</span>
-                  <input type="number" inputmode="decimal" name="equitherm[slope]" min="0.001" max="10" step="0.001" required>
-                  <small data-i18n>settings.equitherm.slope.note</small>
+                  <span data-i18n>settings.equitherm.n</span>
+                  <input type="number" inputmode="decimal" name="equitherm[n_factor]" min="0.001" max="10" step="0.001" required>
                 </label>
 
                 <label>
-                  <span data-i18n>settings.equitherm.exponent.title</span>
-                  <input type="number" inputmode="decimal" name="equitherm[exponent]" min="0.1" max="2" step="0.001" required>
-                  <small data-i18n>settings.equitherm.exponent.note</small>
-                </label>
-              </div>
-
-              <div class="grid">
-                <label>
-                  <span data-i18n>settings.equitherm.shift.title</span>
-                  <input type="number" inputmode="decimal" name="equitherm[shift]" min="-15" max="15" step="0.01" required>
-                  <small data-i18n>settings.equitherm.shift.note</small>
+                  <span data-i18n>settings.equitherm.k</span>
+                  <input type="number" inputmode="decimal" name="equitherm[k_factor]" min="0" max="10" step="0.01" required>
                 </label>
 
                 <label>
-                  <span data-i18n>settings.equitherm.targetDiffFactor.title</span>
-                  <input type="number" inputmode="decimal" name="equitherm[targetDiffFactor]" min="0" max="10" step="0.01" required>
-                  <small data-i18n>settings.equitherm.targetDiffFactor.note</small>
+                  <span data-i18n>settings.equitherm.t.title</span>
+                  <input type="number" inputmode="decimal" name="equitherm[t_factor]" min="0" max="10" step="0.01" required>
+                  <small data-i18n>settings.equitherm.t.note</small>
                 </label>
               </div>
 
@@ -474,7 +424,7 @@
                       <span data-i18n>settings.temp.min</span>
                       <input type="number" inputmode="decimal" name="pid[minTemp]" min="0" max="0" step="1" required>
                     </label>
-
+    
                     <label>
                       <span data-i18n>settings.temp.max</span>
                       <input type="number" inputmode="numeric" name="pid[maxTemp]" min="0" max="0" step="1" required>
@@ -503,12 +453,12 @@
                       <span data-i18n>settings.pid.deadband.p_multiplier</span>
                       <input type="number" inputmode="decimal" name="pid[deadband][p_multiplier]" min="0" max="5" step="0.001" required>
                     </label>
-
+    
                     <label>
                       <span data-i18n>settings.pid.deadband.i_multiplier</span>
                       <input type="number" inputmode="decimal" name="pid[deadband][i_multiplier]" min="0" max="1" step="0.001" required>
                     </label>
-
+    
                     <label>
                       <span data-i18n>settings.pid.deadband.d_multiplier</span>
                       <input type="number" inputmode="decimal" name="pid[deadband][d_multiplier]" min="0" max="1" step="0.001" required>
@@ -520,7 +470,7 @@
                       <span data-i18n>settings.pid.deadband.thresholdHigh</span>
                       <input type="number" inputmode="decimal" name="pid[deadband][thresholdHigh]" min="0" max="5" step="0.01" required>
                     </label>
-
+    
                     <label>
                       <span data-i18n>settings.pid.deadband.thresholdLow</span>
                       <input type="number" inputmode="decimal" name="pid[deadband][thresholdLow]" min="0" max="5" step="0.01" required>
@@ -687,11 +637,6 @@
                       <span data-i18n>settings.ot.options.setDateAndTime</span>
                     </label>
 
-                    <label>
-                      <input type="checkbox" name="opentherm[options][alwaysSetIndoorTemp]" value="true">
-                      <span data-i18n>settings.ot.options.alwaysSetIndoorTemp</span>
-                    </label>
-
                     <label>
                       <input type="checkbox" name="opentherm[options][immergasFix]" value="true">
                       <span data-i18n>settings.ot.options.immergasFix</span>
@@ -707,7 +652,7 @@
                   </fieldset>
                 </div>
               </details>
-
+              
               <br />
               <button type="submit" data-i18n>button.save</button>
             </form>
@@ -921,163 +866,11 @@
     </footer>
 
     <script src="/static/app.js?{BUILD_TIME}"></script>
-    <script src="/static/chart.js?{BUILD_TIME}"></script>
     <script>
       document.addEventListener('DOMContentLoaded', async () => {
         const lang = new Lang(document.getElementById('lang'));
         lang.build();
 
-        let etChart = null;
-        let etChartConfig = {
-          slope: null,
-          exponent: null,
-          shift: null,
-          unitSystem: null,
-          targetTemp: null,
-          minTemp: null,
-          maxTemp: null,
-          decimated: false
-        };
-
-        const hasNeedDecimationChart = () => {
-          return window.innerWidth <= 800;
-        }
-
-        const makeEquithermChart = () => {
-          if (etChart == null) {
-            const ctx = document.getElementById('etChart').getContext('2d');
-
-            try {
-              etChart = new Chart(ctx, {
-                type: 'line',
-                data: {
-                  datasets: [{
-                    borderColor: (context) => {
-                      const chart = context.chart;
-                      const { ctx, chartArea } = chart;
-
-                      if (!chartArea) {
-                        return;
-                      }
-
-                      const gradient = ctx.createLinearGradient(0, chartArea.bottom, 0, chartArea.top);
-                      gradient.addColorStop(0, 'rgba(1, 114, 173, 1)');
-                      gradient.addColorStop(0.5, 'rgba(255, 99, 132, 1)');
-
-                      return gradient;
-                    },
-                    borderWidth: 3,
-                    fill: false,
-                    tension: 0.1,
-                    pointRadius: 2,
-                    pointHoverRadius: 4,
-                    indexAxis: "x",
-                    data: []
-                  }]
-                },
-                options: {
-                  responsive: true,
-                  resizeDelay: 500,
-                  parsing: false,
-                  interaction: {
-                    mode: 'nearest',
-                    intersect: false
-                  },
-                  plugins: {
-                    tooltip: {
-                      enabled: true,
-                      position: 'nearest',
-                      displayColors: false,
-                      callbacks: {
-                        title: (items) => {
-                          return `${i18n("settings.equitherm.chart.outdoorTemp")}: ${items[0].label}`;
-                        }
-                      }
-                    },
-                    legend: {
-                      display: false
-                    }
-                  },
-                  scales: {
-                    x: {
-                      display: true,
-                      type: "linear",
-                      reverse: true,
-                      title: {
-                        display: true
-                      },
-                      ticks: {
-                        stepSize: 1,
-                        format: {
-                          style: "unit",
-                          unit: "degree",
-                          unitDisplay: "narrow"
-                        }
-                      }
-                    },
-                    y: {
-                      display: true,
-                      title: {
-                        display: true
-                      },
-                      ticks: {
-                        format: {
-                          style: "unit",
-                          unit: "degree",
-                          unitDisplay: "narrow"
-                        }
-                      }
-                    }
-                  }
-                }
-              });
-
-            } catch (error) {
-              console.log(error);
-            }
-          }
-
-          if (!etChart) {
-            return;
-          }
-
-          let data = [];
-          etChartConfig.decimated = hasNeedDecimationChart();
-          for (let value = 30; value >= -30; value -= etChartConfig.decimated ? 2 : 1) {
-            const outdoorTemp = etChartConfig.unitSystem == 0 ? value : c2f(value);
-
-            data.push({
-              x: parseFloat(outdoorTemp.toFixed(1)),
-              y: parseFloat(calculateEquithermTemp(outdoorTemp).toFixed(1))
-            });
-          }
-
-          etChart.data.datasets[0].data = data;
-          etChart.data.datasets[0].label = i18n("settings.equitherm.chart.setpointTemp");
-          etChart.options.scales.x.title.text = i18n("settings.equitherm.chart.outdoorTemp");
-          etChart.options.scales.y.title.text = i18n("settings.equitherm.chart.setpointTemp");
-          etChart.update();
-        }
-
-        const calculateEquithermTemp = (outdoorTemp) => {
-          const tempDelta = etChartConfig.targetTemp - outdoorTemp;
-          const maxPoint = etChartConfig.targetTemp - (
-            etChartConfig.maxTemp - etChartConfig.targetTemp
-          ) / etChartConfig.slope;
-
-          const sf = (etChartConfig.maxTemp - etChartConfig.targetTemp) / Math.pow(
-            etChartConfig.targetTemp - maxPoint,
-            1 / etChartConfig.exponent
-          );
-          const result = etChartConfig.targetTemp + etChartConfig.shift + sf * (
-            tempDelta >= 0
-              ? Math.pow(tempDelta, 1 / etChartConfig.exponent)
-              : -(Math.pow(-(tempDelta), 1 / etChartConfig.exponent))
-          );
-
-          return Math.max(Math.min(result, etChartConfig.maxTemp), etChartConfig.minTemp);
-        }
-
         const fillData = (data) => {
           // System
           setSelectValue("[name='system[logLevel]']", data.system.logLevel);
@@ -1122,7 +915,6 @@
           setCheckboxValue("[name='opentherm[options][autoFaultReset]']", data.opentherm.options.autoFaultReset);
           setCheckboxValue("[name='opentherm[options][autoDiagReset]']", data.opentherm.options.autoDiagReset);
           setCheckboxValue("[name='opentherm[options][setDateAndTime]']", data.opentherm.options.setDateAndTime);
-          setCheckboxValue("[name='opentherm[options][alwaysSetIndoorTemp]']", data.opentherm.options.alwaysSetIndoorTemp);
           setCheckboxValue("[name='opentherm[options][nativeHeatingControl]']", data.opentherm.options.nativeHeatingControl);
           setCheckboxValue("[name='opentherm[options][immergasFix]']", data.opentherm.options.immergasFix);
           setBusy('#ot-settings-busy', '#ot-settings', false);
@@ -1171,9 +963,7 @@
             "min": data.system.unitSystem == 0 ? 1 : 33,
             "max": data.system.unitSystem == 0 ? 100 : 212
           });
-          setCheckboxValue("[name='heating[hysteresis][enabled]']", data.heating.hysteresis.enabled);
-          setInputValue("[name='heating[hysteresis][value]']", data.heating.hysteresis.value);
-          setSelectValue("[name='heating[hysteresis][action]']", data.heating.hysteresis.action);
+          setInputValue("[name='heating[hysteresis]']", data.heating.hysteresis);
           setInputValue("[name='heating[turboFactor]']", data.heating.turboFactor);
           setInputValue("[name='heating[maxModulation]']", data.heating.maxModulation);
           setInputValue("[name='heating[overheatProtection][highTemp]']", data.heating.overheatProtection.highTemp, {
@@ -1229,10 +1019,9 @@
 
           // Equitherm
           setCheckboxValue("[name='equitherm[enabled]']", data.equitherm.enabled);
-          setInputValue("[name='equitherm[slope]']", data.equitherm.slope);
-          setInputValue("[name='equitherm[exponent]']", data.equitherm.exponent);
-          setInputValue("[name='equitherm[shift]']", data.equitherm.shift);
-          setInputValue("[name='equitherm[targetDiffFactor]']", data.equitherm.targetDiffFactor);
+          setInputValue("[name='equitherm[n_factor]']", data.equitherm.n_factor);
+          setInputValue("[name='equitherm[k_factor]']", data.equitherm.k_factor);
+          setInputValue("[name='equitherm[t_factor]']", data.equitherm.t_factor);
           setBusy('#equitherm-settings-busy', '#equitherm-settings', false);
 
           // PID
@@ -1256,24 +1045,6 @@
           setInputValue("[name='pid[deadband][thresholdHigh]']", data.pid.deadband.thresholdHigh);
           setInputValue("[name='pid[deadband][thresholdLow]']", data.pid.deadband.thresholdLow);
           setBusy('#pid-settings-busy', '#pid-settings', false);
-
-          const etMinTemp = parseInt(data.system.unitSystem == 0 ? 5 : 41);
-          const etMaxTemp = parseInt(data.system.unitSystem == 0 ? 30 : 86);
-          const etTargetTemp = constrain(parseFloat(data.heating.target), etMinTemp, etMaxTemp);
-
-          setInputValue(".etChartTargetTemp", etTargetTemp.toFixed(1), {
-            "min": etMinTemp,
-            "max": etMaxTemp
-          });
-
-          etChartConfig.slope = data.equitherm.slope;
-          etChartConfig.exponent = data.equitherm.exponent;
-          etChartConfig.shift = data.equitherm.shift;
-          etChartConfig.unitSystem = data.system.unitSystem;
-          etChartConfig.minTemp = data.heating.minTemp;
-          etChartConfig.maxTemp = data.heating.maxTemp;
-
-          makeEquithermChart();
         };
 
         try {
@@ -1303,7 +1074,7 @@
             cache: "no-cache",
             credentials: "include"
           });
-
+          
           if (!response.ok) {
             throw new Error('Response not valid');
           }
@@ -1326,57 +1097,6 @@
         } catch (error) {
           console.log(error);
         }
-
-        document.querySelector(".etChartTargetTemp").addEventListener("input", async (event) => {
-          setValue('.etChartTargetTempValue', parseFloat(event.target.value).toFixed(1));
-        });
-
-        document.querySelector(".etChartTargetTemp").addEventListener("change", async (event) => {
-          if (!event.target.checkValidity()) {
-            return;
-          }
-
-          etChartConfig.targetTemp = parseFloat(event.target.value);
-          setValue('.etChartTargetTempValue', etChartConfig.targetTemp.toFixed(1));
-          makeEquithermChart();
-        });
-
-        document.querySelector("[name='equitherm[slope]']").addEventListener("change", async (event) => {
-          if (!event.target.checkValidity()) {
-            return;
-          }
-
-          etChartConfig.slope = parseFloat(event.target.value);
-          makeEquithermChart();
-        });
-
-        document.querySelector("[name='equitherm[exponent]']").addEventListener("change", async (event) => {
-          if (!event.target.checkValidity()) {
-            return;
-          }
-
-          etChartConfig.exponent = parseFloat(event.target.value);
-          makeEquithermChart();
-        });
-
-        document.querySelector("[name='equitherm[shift]']").addEventListener("change", async (event) => {
-          if (!event.target.checkValidity()) {
-            return;
-          }
-
-          etChartConfig.shift = parseFloat(event.target.value);
-          makeEquithermChart();
-        });
-
-        window.addEventListener('resize', async (event) => {
-          if (etChart) {
-            etChart.resize();
-
-            if (etChartConfig.decimated != hasNeedDecimationChart()) {
-              makeEquithermChart();
-            }
-          }
-        });
       });
     </script>
   </body>

src_data/pages/upgrade.html

@@ -62,19 +62,19 @@
 
           <form action="/api/upgrade" id="upgrade">
             <fieldset class="primary">
-              <label for="firmware-file">
+              <label>
                 <span data-i18n>upgrade.fw</span>:
                 <div class="grid">
-                  <input type="file" name="firmware" id="firmware-file" accept=".bin">
-                  <button type="button" class="upgrade-firmware-result hidden" disabled></button>
+                  <input type="file" name="fw" accept=".bin">
+                  <button type="button" class="fwResult hidden" disabled></button>
                 </div>
               </label>
 
-              <label for="filesystem-file">
+              <label>
                 <span data-i18n>upgrade.fs</span>:
                 <div class="grid">
-                  <input type="file" name="filesystem" id="filesystem-file" accept=".bin">
-                  <button type="button" class="upgrade-filesystem-result hidden" disabled></button>
+                  <input type="file" name="fs" accept=".bin">
+                  <button type="button" class="fsResult hidden" disabled></button>
                 </div>
               </label>
             </fieldset>
@@ -108,7 +108,123 @@
         lang.build();
 
         setupRestoreBackupForm('#restore');
-        setupUpgradeForm('#upgrade');
+
+        const upgradeForm = document.querySelector('#upgrade');
+        if (upgradeForm) {
+          upgradeForm.reset();
+          const statusToText = (status) => {
+            switch (status) {
+              case 0:
+                return "None";
+              case 1:
+                return "No file";
+              case 2:
+                return "Success";
+              case 3:
+                return "Prohibited";
+              case 4:
+                return "Size mismatch";
+              case 5:
+                return "Error on start";
+              case 6:
+                return "Error on write";
+              case 7:
+                return "Error on finish";
+              default:
+                return "Unknown";
+            }
+          };
+
+          upgradeForm.addEventListener('submit', async (event) => {
+            event.preventDefault();
+
+            hide('.fwResult');
+            hide('.fsResult');
+
+            let button = upgradeForm.querySelector('button[type="submit"]');
+            button.textContent = i18n('button.uploading');
+            button.setAttribute('disabled', true);
+            button.setAttribute('aria-busy', true);
+
+            try {
+              let fd = new FormData();
+
+              const fw = upgradeForm.querySelector("[name='fw']").files;
+              if (fw.length > 0) {
+                fd.append("fw_size", fw[0].size);
+                fd.append("fw", fw[0]);
+              }
+
+              const fs = upgradeForm.querySelector("[name='fs']").files;
+              if (fs.length > 0) {
+                fd.append("fs_size", fs[0].size);
+                fd.append("fs", fs[0]);
+              }
+
+              let response = await fetch(upgradeForm.action, {
+                method: "POST",
+                cache: "no-cache",
+                credentials: "include",
+                body: fd
+              });
+              
+              if (response.status != 202 && response.status != 406) {
+                throw new Error('Response not valid');
+              }
+
+              const result = await response.json();
+              let resItem = upgradeForm.querySelector('.fwResult');
+              if (resItem && result.firmware.status > 1) {
+                resItem.textContent = statusToText(result.firmware.status);
+                resItem.classList.remove('hidden');
+
+                if (result.firmware.status == 2) {
+                  resItem.classList.remove('failed');
+                  resItem.classList.add('success');
+                } else {
+                  resItem.classList.remove('success');
+                  resItem.classList.add('failed');
+
+                  if (result.firmware.error != "") {
+                    resItem.textContent += `: ${result.firmware.error}`;
+                  }
+                }
+              }
+
+              resItem = upgradeForm.querySelector('.fsResult');
+              if (resItem && result.filesystem.status > 1) {
+                resItem.textContent = statusToText(result.filesystem.status);
+                resItem.classList.remove('hidden');
+
+                if (result.filesystem.status == 2) {
+                  resItem.classList.remove('failed');
+                  resItem.classList.add('success');
+                } else {
+                  resItem.classList.remove('success');
+                  resItem.classList.add('failed');
+
+                  if (result.filesystem.error != "") {
+                    resItem.textContent += `: ${result.filesystem.error}`;
+                  }
+                }
+              }
+
+            } catch (err) {
+              console.log(err);
+              button.textContent = i18n('button.error');
+              button.classList.add('failed');
+
+            } finally {
+              setTimeout(() => {
+                button.removeAttribute('aria-busy');
+                button.removeAttribute('disabled');
+                button.classList.remove('success', 'failed');
+                button.textContent = i18n(button.dataset.i18n);
+                upgradeForm.reset();
+              }, 10000);
+            }
+          });
+        }
       });
     </script>
   </body>

src_data/scripts/utils.js

@@ -5,13 +5,8 @@ const setupForm = (formSelector, onResultCallback = null, noCastItems = []) => {
   }
 
   form.querySelectorAll('input').forEach(item => {
-    item.addEventListener('change', (event) => {
-      if (!event.target.checkValidity()) {
-        event.target.setAttribute('aria-invalid', true);
-
-      } else if (event.target.hasAttribute('aria-invalid')) {
-        event.target.removeAttribute('aria-invalid');
-      }
+    item.addEventListener('change', (e) => {
+      e.target.setAttribute('aria-invalid', !e.target.checkValidity());
     })
   });
 
@@ -635,10 +630,6 @@ const setCheckboxValue = (selector, value, parent = undefined) => {
   }
 
   item.checked = value;
-
-  setTimeout(() => {
-    item.dispatchEvent(new Event("change"));
-  }, 10);
 }
 
 const setRadioValue = (selector, value, parent = undefined) => {
@@ -652,14 +643,7 @@ const setRadioValue = (selector, value, parent = undefined) => {
   }
 
   for (let item of items) {
-    const checked = item.value == value;
-    if (item.checked != checked) {
-      item.checked = checked;
-
-      setTimeout(() => {
-        item.dispatchEvent(new Event("change"));
-      }, 10);
-    }
+    item.checked = item.value == value;
   }
 }
 
@@ -674,17 +658,13 @@ const setInputValue = (selector, value, attrs = {}, parent = undefined) => {
   }
 
   for (let item of items) {
+    item.value = value;
+
     if (attrs instanceof Object) {
       for (let attrKey of Object.keys(attrs)) {
         item.setAttribute(attrKey, attrs[attrKey]);
       }
     }
-
-    item.value = value;
-
-    setTimeout(() => {
-      item.dispatchEvent(new Event("change"));
-    }, 10);
   }
 }
 
@@ -873,12 +853,4 @@ function dec2hex(i) {
 
 function constrain(amt, low, high) {
   return ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt)));
-}
-
-function c2f(value) {
-  return (9 / 5) * value + 32;
-}
-
-function f2c(value) {
-  return (value - 32) * (5 / 9);
 }