refactor: added localization for hysteresis

gulpfile.js

@@ -27,9 +27,6 @@ let paths = {
         'src_data/scripts/i18n.min.js',
         'src_data/scripts/lang.js',
         'src_data/scripts/utils.js'
-      ],
-      'chart.js': [
-        'src_data/scripts/chart.js'
       ]
     }
   },

lib/Equitherm/Equitherm.h

@@ -0,0 +1,63 @@
+#include <Arduino.h>
+
+#if defined(EQUITHERM_INTEGER)
+// расчёты с целыми числами
+typedef int datatype;
+#else
+// расчёты с float числами
+typedef float datatype;
+#endif
+
+class Equitherm {
+public:
+  datatype targetTemp = 0;
+  datatype indoorTemp = 0;
+  datatype outdoorTemp = 0;
+  float Kn = 0.0;
+  float Kk = 0.0;
+  float Kt = 0.0;
+
+  Equitherm() = default;
+
+  // kn, kk, kt
+  Equitherm(float new_kn, float new_kk, float new_kt) {
+    Kn = new_kn;
+    Kk = new_kk;
+    Kt = new_kt;
+  }
+
+  // лимит выходной величины
+  void setLimits(unsigned short min_output, unsigned short max_output) {
+    _minOut = min_output;
+    _maxOut = max_output;
+  }
+
+  // возвращает новое значение при вызове
+  datatype getResult() {
+    datatype output = getResultN() + getResultK() + getResultT();
+    output = constrain(output, _minOut, _maxOut);		// ограничиваем выход
+    return output;
+  }
+
+private:
+  unsigned short _minOut = 20, _maxOut = 90;
+
+  // температура контура отопления в зависимости от наружной температуры
+  datatype getResultN() {
+    float a = (-0.21 * Kn) - 0.06;     // a = -0,21k — 0,06
+    float b = (6.04 * Kn) + 1.98;      // b = 6,04k + 1,98
+    float c = (-5.06 * Kn) + 18.06;    // с = -5,06k + 18,06
+    float x = (-0.2 * outdoorTemp) + 5; // x = -0.2*t1 + 5
+    return (a * x * x) + (b * x) + c;       // Tn = ax2 + bx + c
+  }
+
+  // поправка на желаемую комнатную температуру
+  datatype getResultK() {
+    return (targetTemp - 20) * Kk;
+  }
+
+  // Расчет поправки (ошибки) термостата
+  datatype getResultT() {
+    return constrain((targetTemp - indoorTemp), -3, 3) * Kt;
+  }
+};

platformio.ini

@@ -14,7 +14,7 @@ extra_configs = secrets.default.ini
 core_dir = .pio
 
 [env]
-version = 1.6.0
+version = 1.5.6
 framework = arduino
 lib_deps = 
 	bblanchon/ArduinoJson@^7.4.2
@@ -98,7 +98,7 @@ board_build.partitions = esp32_partitions.csv
 lib_deps =
 	${env.lib_deps}
 	laxilef/ESP32Scheduler@^1.0.1
-nimble_lib = h2zero/NimBLE-Arduino@2.3.7
+nimble_lib = h2zero/NimBLE-Arduino@2.3.3
 lib_ignore = 
 extra_scripts = 
 	post:tools/esp32.py
@@ -234,7 +234,7 @@ build_flags =
 	${esp32_defaults.build_flags}
 	-D ARDUINO_USB_MODE=0
 	-D ARDUINO_USB_CDC_ON_BOOT=1
-	-D MYNEWT_VAL_BLE_EXT_ADV=1
+	-D CONFIG_BT_NIMBLE_EXT_ADV=1
 	-D USE_BLE=1
 	-D DEFAULT_OT_IN_GPIO=35
 	-D DEFAULT_OT_OUT_GPIO=36
@@ -260,7 +260,7 @@ build_unflags =
 build_type = ${esp32_defaults.build_type}
 build_flags = 
 	${esp32_defaults.build_flags}
-	-D MYNEWT_VAL_BLE_EXT_ADV=1
+	-D CONFIG_BT_NIMBLE_EXT_ADV=1
 	-D USE_BLE=1
 	-D DEFAULT_OT_IN_GPIO=8
 	-D DEFAULT_OT_OUT_GPIO=10
@@ -366,7 +366,7 @@ build_unflags =
 build_type = ${esp32_defaults.build_type}
 build_flags = 
 	${esp32_defaults.build_flags}
-	-D MYNEWT_VAL_BLE_EXT_ADV=1
+	-D CONFIG_BT_NIMBLE_EXT_ADV=1
 	-D USE_BLE=1
 	-D DEFAULT_OT_IN_GPIO=3
 	-D DEFAULT_OT_OUT_GPIO=1

src/HaHelper.h

@@ -866,19 +866,19 @@ public:
     return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_SWITCH), F("equitherm")).c_str(), doc);
   }
 
-  bool publishInputEquithermSlope(bool enabledByDefault = true) {
+  bool publishInputEquithermFactorN(bool enabledByDefault = true) {
     JsonDocument doc;
     doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->statusTopic.c_str();
     doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_slope"));
+    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_n"));
-    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_slope"));
+    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_n"));
     doc[FPSTR(HA_ENTITY_CATEGORY)] = FPSTR(HA_ENTITY_CATEGORY_CONFIG);
-    doc[FPSTR(HA_NAME)] = F("Equitherm slope");
+    doc[FPSTR(HA_NAME)] = F("Equitherm factor N");
-    doc[FPSTR(HA_ICON)] = F("mdi:slope-uphill");
+    doc[FPSTR(HA_ICON)] = F("mdi:alpha-n-circle-outline");
     doc[FPSTR(HA_STATE_TOPIC)] = this->settingsTopic.c_str();
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.slope|float(0)|round(3) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.n_factor|float(0)|round(3) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->setSettingsTopic.c_str();
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"slope\" : {{ value }}}}");
+    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"n_factor\" : {{ value }}}}");
     doc[FPSTR(HA_MIN)] = 0.001f;
     doc[FPSTR(HA_MAX)] = 10;
     doc[FPSTR(HA_STEP)] = 0.001f;
@@ -886,80 +886,56 @@ public:
     doc[FPSTR(HA_EXPIRE_AFTER)] = this->expireAfter;
     doc.shrinkToFit();
 
-    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_slope")).c_str(), doc);
+    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_n_factor")).c_str(), doc);
   }
 
-  bool publishInputEquithermExponent(bool enabledByDefault = true) {
+  bool publishInputEquithermFactorK(bool enabledByDefault = true) {
     JsonDocument doc;
     doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->statusTopic.c_str();
     doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_exponent"));
+    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_k"));
-    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_exponent"));
+    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_k"));
     doc[FPSTR(HA_ENTITY_CATEGORY)] = FPSTR(HA_ENTITY_CATEGORY_CONFIG);
-    doc[FPSTR(HA_NAME)] = F("Equitherm exponent");
+    doc[FPSTR(HA_NAME)] = F("Equitherm factor K");
-    doc[FPSTR(HA_ICON)] = F("mdi:exponent");
+    doc[FPSTR(HA_ICON)] = F("mdi:alpha-k-circle-outline");
     doc[FPSTR(HA_STATE_TOPIC)] = this->settingsTopic.c_str();
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.exponent|float(0)|round(3) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.k_factor|float(0)|round(2) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->setSettingsTopic.c_str();
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"exponent\" : {{ value }}}}");
+    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"k_factor\" : {{ value }}}}");
-    doc[FPSTR(HA_MIN)] = 0.1;
+    doc[FPSTR(HA_MIN)] = 0;
-    doc[FPSTR(HA_MAX)] = 2;
+    doc[FPSTR(HA_MAX)] = 10;
-    doc[FPSTR(HA_STEP)] = 0.001f;
-    doc[FPSTR(HA_MODE)] = FPSTR(HA_MODE_BOX);
-    doc[FPSTR(HA_EXPIRE_AFTER)] = this->expireAfter;
-    doc.shrinkToFit();
-
-    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_exponent")).c_str(), doc);
-  }
-
-  bool publishInputEquithermShift(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->statusTopic.c_str();
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_shift"));
-    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_shift"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = FPSTR(HA_ENTITY_CATEGORY_CONFIG);
-    doc[FPSTR(HA_DEVICE_CLASS)] = FPSTR(S_TEMPERATURE);
-    doc[FPSTR(HA_NAME)] = F("Equitherm shift");
-    doc[FPSTR(HA_ICON)] = F("mdi:chart-areaspline");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->settingsTopic.c_str();
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.shift|float(0)|round(2) }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->setSettingsTopic.c_str();
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"shift\" : {{ value }}}}");
-    doc[FPSTR(HA_MIN)] = -15;
-    doc[FPSTR(HA_MAX)] = 15;
     doc[FPSTR(HA_STEP)] = 0.01f;
     doc[FPSTR(HA_MODE)] = FPSTR(HA_MODE_BOX);
     doc[FPSTR(HA_EXPIRE_AFTER)] = this->expireAfter;
     doc.shrinkToFit();
 
-    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_shift")).c_str(), doc);
+    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_k_factor")).c_str(), doc);
   }
 
-  bool publishInputEquithermTargetDiffFactor(bool enabledByDefault = true) {
+  bool publishInputEquithermFactorT(bool enabledByDefault = true) {
     JsonDocument doc;
     doc[FPSTR(HA_AVAILABILITY)][0][FPSTR(HA_TOPIC)] = this->statusTopic.c_str();
     doc[FPSTR(HA_AVAILABILITY)][1][FPSTR(HA_TOPIC)] = this->settingsTopic.c_str();
     doc[FPSTR(HA_AVAILABILITY)][1][FPSTR(HA_VALUE_TEMPLATE)] = F("{{ iif(value_json.pid.enabled, 'offline', 'online') }}");
     doc[FPSTR(HA_AVAILABILITY_MODE)] = F("all");
     doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_target_diff_factor"));
+    doc[FPSTR(HA_UNIQUE_ID)] = this->getUniqueIdWithPrefix(F("equitherm_t"));
-    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_target_diff_factor"));
+    doc[FPSTR(HA_DEFAULT_ENTITY_ID)] = this->getEntityIdWithPrefix(FPSTR(HA_ENTITY_NUMBER), F("equitherm_t"));
     doc[FPSTR(HA_ENTITY_CATEGORY)] = FPSTR(HA_ENTITY_CATEGORY_CONFIG);
-    doc[FPSTR(HA_NAME)] = F("Equitherm target diff factor");
+    doc[FPSTR(HA_NAME)] = F("Equitherm factor T");
-    doc[FPSTR(HA_ICON)] = F("mdi:chart-timeline-variant-shimmer");
+    doc[FPSTR(HA_ICON)] = F("mdi:alpha-t-circle-outline");
     doc[FPSTR(HA_STATE_TOPIC)] = this->settingsTopic.c_str();
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.targetDiffFactor|float(0)|round(3) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.t_factor|float(0)|round(2) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->setSettingsTopic.c_str();
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"targetDiffFactor\" : {{ value }}}}");
+    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"t_factor\" : {{ value }}}}");
     doc[FPSTR(HA_MIN)] = 0;
     doc[FPSTR(HA_MAX)] = 10;
-    doc[FPSTR(HA_STEP)] = 0.001f;
+    doc[FPSTR(HA_STEP)] = 0.01f;
     doc[FPSTR(HA_MODE)] = FPSTR(HA_MODE_BOX);
     doc[FPSTR(HA_EXPIRE_AFTER)] = this->expireAfter;
     doc.shrinkToFit();
 
-    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_target_diff_factor")).c_str(), doc);
+    return this->publish(this->makeConfigTopic(FPSTR(HA_ENTITY_NUMBER), F("equitherm_t_factor")).c_str(), doc);
   }
 
 

src/MqttTask.h

@@ -503,10 +503,9 @@ protected:
 
     // equitherm
     this->haHelper->publishSwitchEquitherm();
-    this->haHelper->publishInputEquithermSlope(false);
+    this->haHelper->publishInputEquithermFactorN(false);
-    this->haHelper->publishInputEquithermExponent(false);
+    this->haHelper->publishInputEquithermFactorK(false);
-    this->haHelper->publishInputEquithermShift(false);
+    this->haHelper->publishInputEquithermFactorT(false);
-    this->haHelper->publishInputEquithermTargetDiffFactor(false);
 
     // states
     this->haHelper->publishStatusState();

src/OpenThermTask.h

@@ -1209,8 +1209,8 @@ protected:
       }
     }
 
-    // Set indoor temp for Native heating control/Always set indoor temp
+    // Native heating control
-    if (settings.opentherm.options.nativeHeatingControl || settings.opentherm.options.alwaysSetIndoorTemp) {
+    if (settings.opentherm.options.nativeHeatingControl) {
       // Converted current indoor temp
       float convertedTemp = convertTemp(vars.master.heating.indoorTemp, settings.system.unitSystem, settings.opentherm.unitSystem);
 
@@ -1237,13 +1237,10 @@ protected:
           Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set current CH2 indoor temp"));
         }
       }
-    }
 
 
-    // Native heating control
-    if (settings.opentherm.options.nativeHeatingControl) {
       // Converted target indoor temp
-      float convertedTemp = convertTemp(vars.master.heating.targetTemp, settings.system.unitSystem, settings.opentherm.unitSystem);
+      convertedTemp = convertTemp(vars.master.heating.targetTemp, settings.system.unitSystem, settings.opentherm.unitSystem);
 
       // Set target indoor temp
       if (this->needSetHeatingTemp(convertedTemp)) {

src/RegulatorTask.h

@@ -1,5 +1,7 @@
+#include <Equitherm.h>
 #include <GyverPID.h>
 
+Equitherm etRegulator;
 GyverPID pidRegulator(0, 0, 0);
 
 
@@ -155,32 +157,39 @@ protected:
 
     // if use equitherm
     if (settings.equitherm.enabled) {
-      float tempDelta = settings.heating.target - vars.master.heating.outdoorTemp;
+      unsigned short minTemp = settings.heating.minTemp;
-      float maxPoint = settings.heating.target - (
+      unsigned short maxTemp = settings.heating.maxTemp;
-        settings.heating.maxTemp - settings.heating.target
+      float targetTemp = settings.heating.target;
-      ) / settings.equitherm.slope;
+      float indoorTemp = vars.master.heating.indoorTemp;
+      float outdoorTemp = vars.master.heating.outdoorTemp;
 
-      float sf = (settings.heating.maxTemp - settings.heating.target) / pow(
+      if (settings.system.unitSystem == UnitSystem::IMPERIAL) {
-        settings.heating.target - maxPoint,
+        minTemp = f2c(minTemp);
-        1.0f / settings.equitherm.exponent
+        maxTemp = f2c(maxTemp);
-      );
+        targetTemp = f2c(targetTemp);
-      float etResult = settings.heating.target + settings.equitherm.shift + sf * (
+        indoorTemp = f2c(indoorTemp);
-        tempDelta >= 0 
+        outdoorTemp = f2c(outdoorTemp);
-          ? pow(tempDelta, 1.0f / settings.equitherm.exponent) 
-          : -(pow(-(tempDelta), 1.0f / settings.equitherm.exponent))
-      );
-
-      // add diff
-      if (this->indoorSensorsConnected && !settings.pid.enabled && !settings.heating.turbo) {
-        etResult += constrain(
-          settings.heating.target - vars.master.heating.indoorTemp,
-          -3.0f,
-          3.0f
-        ) * settings.equitherm.targetDiffFactor;
       }
 
-      // limit
+      if (!this->indoorSensorsConnected || settings.pid.enabled) {
-      etResult = constrain(etResult, settings.heating.minTemp, settings.heating.maxTemp);
+        etRegulator.Kt = 0.0f;
+        etRegulator.indoorTemp = 0.0f;
+
+      } else {
+        etRegulator.Kt = settings.heating.turbo ? 0.0f : settings.equitherm.t_factor;
+        etRegulator.indoorTemp = indoorTemp;
+      }
+
+      etRegulator.setLimits(minTemp, maxTemp);
+      etRegulator.Kn = settings.equitherm.n_factor;
+      etRegulator.Kk = settings.equitherm.k_factor;
+      etRegulator.targetTemp = targetTemp;
+      etRegulator.outdoorTemp = outdoorTemp;
+      float etResult = etRegulator.getResult();
+
+      if (settings.system.unitSystem == UnitSystem::IMPERIAL) {
+        etResult = c2f(etResult);
+      }
 
       if (fabsf(prevEtResult - etResult) > 0.09f) {
         prevEtResult = etResult;

src/Sensors.h

@@ -149,7 +149,7 @@ public:
 
   static int16_t getIdByName(const char* name) {
     if (settings == nullptr) {
-      return -1;
+      return 0;
     }
 
     for (uint8_t id = 0; id <= getMaxSensorId(); id++) {
@@ -163,7 +163,7 @@ public:
 
   static int16_t getIdByObjectId(const char* objectId) {
     if (settings == nullptr) {
-      return -1;
+      return 0;
     }
 
     String refObjectId;
@@ -329,12 +329,12 @@ public:
 
   static float getMeanValueByPurpose(Purpose purpose, const ValueType valueType, bool onlyConnected = true) {
     if (settings == nullptr || results == nullptr) {
-      return 0.0f;
+      return 0;
     }
 
     uint8_t valueId = (uint8_t) valueType;
     if (!isValidValueId(valueId)) {
-      return 0.0f;
+      return 0;
     }
     
     float value = 0.0f;
@@ -363,7 +363,7 @@ public:
 
   static bool existsConnectedSensorsByPurpose(Purpose purpose) {
     if (settings == nullptr || results == nullptr) {
-      return false;
+      return 0;
     }
 
     for (uint8_t id = 0; id <= getMaxSensorId(); id++) {

src/Settings.h

@@ -78,7 +78,6 @@ struct Settings {
       bool autoFaultReset = false;
       bool autoDiagReset = false;
       bool setDateAndTime = false;
-      bool alwaysSetIndoorTemp = true;
       bool nativeHeatingControl = false;
       bool immergasFix = false;
     } options;
@@ -160,10 +159,9 @@ struct Settings {
 
   struct {
     bool enabled = false;
-    float slope = 0.7f;
+    float n_factor = 0.7f;
-    float exponent = 1.3f;
+    float k_factor = 3.0f;
-    float shift = 0.0f;
+    float t_factor = 2.0f;
-    float targetDiffFactor = 2.0f;
   } equitherm;
 
   struct {

src/strings.h

@@ -38,7 +38,6 @@ const char S_ACTION[]                               PROGMEM = "action";
 const char S_ACTIONS[]                              PROGMEM = "actions";
 const char S_ACTIVE[]                               PROGMEM = "active";
 const char S_ADDRESS[]                              PROGMEM = "address";
-const char S_ALWAYS_SET_INDOOR_TEMP[]               PROGMEM = "alwaysSetIndoorTemp";
 const char S_ANTI_STUCK_INTERVAL[]                  PROGMEM = "antiStuckInterval";
 const char S_ANTI_STUCK_TIME[]                      PROGMEM = "antiStuckTime";
 const char S_AP[]                                   PROGMEM = "ap";
@@ -83,7 +82,6 @@ const char S_ENABLED[]                              PROGMEM = "enabled";
 const char S_ENV[]                                  PROGMEM = "env";
 const char S_EPC[]                                  PROGMEM = "epc";
 const char S_EQUITHERM[]                            PROGMEM = "equitherm";
-const char S_EXPONENT[]                             PROGMEM = "exponent";
 const char S_EXTERNAL_PUMP[]                        PROGMEM = "externalPump";
 const char S_FACTOR[]                               PROGMEM = "factor";
 const char S_FAULT[]                                PROGMEM = "fault";
@@ -120,6 +118,7 @@ const char S_INVERT_STATE[]                         PROGMEM = "invertState";
 const char S_IP[]                                   PROGMEM = "ip";
 const char S_I_FACTOR[]                             PROGMEM = "i_factor";
 const char S_I_MULTIPLIER[]                         PROGMEM = "i_multiplier";
+const char S_K_FACTOR[]                             PROGMEM = "k_factor";
 const char S_LOGIN[]                                PROGMEM = "login";
 const char S_LOG_LEVEL[]                            PROGMEM = "logLevel";
 const char S_LOW_TEMP[]                             PROGMEM = "lowTemp";
@@ -145,6 +144,7 @@ const char S_NAME[]                                 PROGMEM = "name";
 const char S_NATIVE_HEATING_CONTROL[]               PROGMEM = "nativeHeatingControl";
 const char S_NETWORK[]                              PROGMEM = "network";
 const char S_NTP[]                                  PROGMEM = "ntp";
+const char S_N_FACTOR[]                             PROGMEM = "n_factor";
 const char S_OFFSET[]                               PROGMEM = "offset";
 const char S_ON_ENABLED_HEATING[]                   PROGMEM = "onEnabledHeating";
 const char S_ON_FAULT[]                             PROGMEM = "onFault";
@@ -183,11 +183,9 @@ const char S_SERIAL[]                               PROGMEM = "serial";
 const char S_SERVER[]                               PROGMEM = "server";
 const char S_SETTINGS[]                             PROGMEM = "settings";
 const char S_SET_DATE_AND_TIME[]                    PROGMEM = "setDateAndTime";
-const char S_SHIFT[]                                PROGMEM = "shift";
 const char S_SIGNAL_QUALITY[]                       PROGMEM = "signalQuality";
 const char S_SIZE[]                                 PROGMEM = "size";
 const char S_SLAVE[]                                PROGMEM = "slave";
-const char S_SLOPE[]                                PROGMEM = "slope";
 const char S_SSID[]                                 PROGMEM = "ssid";
 const char S_STA[]                                  PROGMEM = "sta";
 const char S_STATE[]                                PROGMEM = "state";
@@ -199,7 +197,6 @@ const char S_SUBNET[]                               PROGMEM = "subnet";
 const char S_SUMMER_WINTER_MODE[]                   PROGMEM = "summerWinterMode";
 const char S_SYSTEM[]                               PROGMEM = "system";
 const char S_TARGET[]                               PROGMEM = "target";
-const char S_TARGET_DIFF_FACTOR[]                   PROGMEM = "targetDiffFactor";
 const char S_TARGET_TEMP[]                          PROGMEM = "targetTemp";
 const char S_TELNET[]                               PROGMEM = "telnet";
 const char S_TEMPERATURE[]                          PROGMEM = "temperature";
@@ -212,6 +209,7 @@ const char S_TRESHOLD_TIME[]                        PROGMEM = "tresholdTime";
 const char S_TURBO[]                                PROGMEM = "turbo";
 const char S_TURBO_FACTOR[]                         PROGMEM = "turboFactor";
 const char S_TYPE[]                                 PROGMEM = "type";
+const char S_T_FACTOR[]                             PROGMEM = "t_factor";
 const char S_UNIT_SYSTEM[]                          PROGMEM = "unitSystem";
 const char S_UPTIME[]                               PROGMEM = "uptime";
 const char S_USE[]                                  PROGMEM = "use";

src/utils.h

@@ -468,7 +468,6 @@ void settingsToJson(const Settings& src, JsonVariant dst, bool safe = false) {
     otOptions[FPSTR(S_AUTO_FAULT_RESET)] = src.opentherm.options.autoFaultReset;
     otOptions[FPSTR(S_AUTO_DIAG_RESET)] = src.opentherm.options.autoDiagReset;
     otOptions[FPSTR(S_SET_DATE_AND_TIME)] = src.opentherm.options.setDateAndTime;
-    otOptions[FPSTR(S_ALWAYS_SET_INDOOR_TEMP)] = src.opentherm.options.alwaysSetIndoorTemp;
     otOptions[FPSTR(S_NATIVE_HEATING_CONTROL)] = src.opentherm.options.nativeHeatingControl;
     otOptions[FPSTR(S_IMMERGAS_FIX)] = src.opentherm.options.immergasFix;
 
@@ -520,10 +519,9 @@ void settingsToJson(const Settings& src, JsonVariant dst, bool safe = false) {
 
   auto equitherm = dst[FPSTR(S_EQUITHERM)].to<JsonObject>();
   equitherm[FPSTR(S_ENABLED)] = src.equitherm.enabled;
-  equitherm[FPSTR(S_SLOPE)] = roundf(src.equitherm.slope, 3);
+  equitherm[FPSTR(S_N_FACTOR)] = roundf(src.equitherm.n_factor, 3);
-  equitherm[FPSTR(S_EXPONENT)] = roundf(src.equitherm.exponent, 3);
+  equitherm[FPSTR(S_K_FACTOR)] = roundf(src.equitherm.k_factor, 3);
-  equitherm[FPSTR(S_SHIFT)] = roundf(src.equitherm.shift, 2);
+  equitherm[FPSTR(S_T_FACTOR)] = roundf(src.equitherm.t_factor, 3);
-  equitherm[FPSTR(S_TARGET_DIFF_FACTOR)] = roundf(src.equitherm.targetDiffFactor, 3);
 
   auto pid = dst[FPSTR(S_PID)].to<JsonObject>();
   pid[FPSTR(S_ENABLED)] = src.pid.enabled;
@@ -1004,15 +1002,6 @@ bool jsonToSettings(const JsonVariantConst src, Settings& dst, bool safe = false
       }
     }
 
-    if (src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_ALWAYS_SET_INDOOR_TEMP)].is<bool>()) {
-      bool value = src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_ALWAYS_SET_INDOOR_TEMP)].as<bool>();
-
-      if (value != dst.opentherm.options.alwaysSetIndoorTemp) {
-        dst.opentherm.options.alwaysSetIndoorTemp = value;
-        changed = true;
-      }
-    }
-
     if (src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_NATIVE_HEATING_CONTROL)].is<bool>()) {
       bool value = src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_NATIVE_HEATING_CONTROL)].as<bool>();
 
@@ -1140,38 +1129,29 @@ bool jsonToSettings(const JsonVariantConst src, Settings& dst, bool safe = false
     }
   }
 
-  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_SLOPE)].isNull()) {
+  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_N_FACTOR)].isNull()) {
-    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_SLOPE)].as<float>();
+    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_N_FACTOR)].as<float>();
 
-    if (value > 0.0f && value <= 10.0f && fabsf(value - dst.equitherm.slope) > 0.0001f) {
+    if (value > 0 && value <= 10 && fabsf(value - dst.equitherm.n_factor) > 0.0001f) {
-      dst.equitherm.slope = roundf(value, 3);
+      dst.equitherm.n_factor = roundf(value, 3);
       changed = true;
     }
   }
 
-  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_EXPONENT)].isNull()) {
+  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_K_FACTOR)].isNull()) {
-    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_EXPONENT)].as<float>();
+    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_K_FACTOR)].as<float>();
 
-    if (value > 0.0f && value <= 2.0f && fabsf(value - dst.equitherm.exponent) > 0.0001f) {
+    if (value >= 0 && value <= 10 && fabsf(value - dst.equitherm.k_factor) > 0.0001f) {
-      dst.equitherm.exponent = roundf(value, 3);
+      dst.equitherm.k_factor = roundf(value, 3);
       changed = true;
     }
   }
 
-  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_SHIFT)].isNull()) {
+  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_T_FACTOR)].isNull()) {
-    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_SHIFT)].as<float>();
+    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_T_FACTOR)].as<float>();
 
-    if (value >= -15.0f && value <= 15.0f && fabsf(value - dst.equitherm.shift) > 0.0001f) {
+    if (value >= 0 && value <= 10 && fabsf(value - dst.equitherm.t_factor) > 0.0001f) {
-      dst.equitherm.shift = roundf(value, 2);
+      dst.equitherm.t_factor = roundf(value, 3);
-      changed = true;
-    }
-  }
-
-  if (!src[FPSTR(S_EQUITHERM)][FPSTR(S_TARGET_DIFF_FACTOR)].isNull()) {
-    float value = src[FPSTR(S_EQUITHERM)][FPSTR(S_TARGET_DIFF_FACTOR)].as<float>();
-
-    if (value >= 0.0f && value <= 10.0f && fabsf(value - dst.equitherm.targetDiffFactor) > 0.0001f) {
-      dst.equitherm.targetDiffFactor = roundf(value, 3);
       changed = true;
     }
   }

src_data/locales/cn.json

@@ -380,26 +380,11 @@
       },
 
       "equitherm": {
-        "slope": {
+        "n": "N 系数",
-          "title": "斜率",
+        "k": "K 系数",
-          "note": "热损失补偿。主要调谐参数。"
+        "t": {
-        },
+          "title": "T 系数",
-        "exponent": {
+          "note": "启用PID时此参数无效"
-          "title": "指数",
-          "note": "散热器效率。典型值：<code>1.1</code> - 地板采暖，<code>1.2</code> - 铸铁，<code>1.3</code> - 面板散热器，<code>1.4</code> - 对流器。"
-        },
-        "shift": {
-          "title": "偏移",
-          "note": "补偿额外热损失（例如，在管道中）或额外热源。"
-        },
-        "targetDiffFactor": {
-          "title": "T 因子",
-          "note": "如果启用 PID，则不使用。将目标和当前室内温度之间的差值添加到设定点：<code>setpoint = setpoint + ((target - indoor) * T)</code>。"
-        },
-        "chart": {
-          "targetTemp": "目标室内温度",
-          "setpointTemp": "热载体温度",
-          "outdoorTemp": "室外温度"
         }
       },
 

src_data/locales/en.json

@@ -380,26 +380,11 @@
       },
 
       "equitherm": {
-        "slope": {
+        "n": "N factor",
-          "title": "Slope",
+        "k": "K factor",
-          "note": "Heat loss compensation. Main tuning parameter."
+        "t": {
-        },
-        "exponent": {
-          "title": "Exponent",
-          "note": "Radiator efficiency.  Typical values: <code>1.1</code> - Floor heating, <code>1.2</code> - Cast iron, <code>1.3</code> - Panel radiators, <code>1.4</code> - Convectors."
-        },
-        "shift": {
-          "title": "Shift",
-          "note": "Compensates for additional heat losses (e.g., in pipes) or extra heat sources."
-        },
-        "targetDiffFactor": {
           "title": "T factor",
-          "note": "Not used if PID is enabled. Adds to the setpoint the difference between the target and current indoor temp: <code>setpoint = setpoint + ((target - indoor) * T)</code>."
+          "note": "Not used if PID is enabled"
-        },
-        "chart": {
-          "targetTemp": "Target indoor temperature",
-          "setpointTemp": "Heat carrier temperature",
-          "outdoorTemp": "Outdoor temperature"
         }
       },
 
@@ -457,7 +442,6 @@
           "autoFaultReset": "Auto fault reset <small>(not recommended!)</small>",
           "autoDiagReset": "Auto diag reset <small>(not recommended!)</small>",
           "setDateAndTime": "Set date & time on boiler",
-          "alwaysSetIndoorTemp": "Always set indoor temperature",
           "immergasFix": "Fix for Immergas boilers"
         },
 

src_data/locales/it.json

@@ -380,26 +380,11 @@
       },
 
       "equitherm": {
-        "slope": {
+        "n": "Fattore N",
-          "title": "Pendenza",
+        "k": "Fattore K",
-          "note": "Compensazione della perdita di calore. Parametro di regolazione principale."
+        "t": {
-        },
-        "exponent": {
-          "title": "Esponente",
-          "note": "Efficienza del radiatore. Valori tipici: <code>1.1</code> - Riscaldamento a pavimento, <code>1.2</code> - Ghisa, <code>1.3</code> - Radiatori a pannello, <code>1.4</code> - Convettori."
-        },
-        "shift": {
-          "title": "Spostamento",
-          "note": "Compensa perdite di calore aggiuntive (ad es., nelle tubature) o fonti di calore extra."
-        },
-        "targetDiffFactor": {
           "title": "Fattore T",
-          "note": "Non utilizzato se PID è abilitato. Aggiunge al setpoint la differenza tra la temperatura target e quella interna attuale: <code>setpoint = setpoint + ((target - indoor) * T)</code>."
+          "note": "Non usato se PID è attivato"
-        },
-        "chart": {
-          "targetTemp": "Temperatura interna target",
-          "setpointTemp": "Temperatura del vettore termico",
-          "outdoorTemp": "Temperatura esterna"
         }
       },
 

src_data/locales/nl.json

@@ -348,26 +348,11 @@
         "treshold": "Drempeltijd <small>(sec)</small>"
       },
       "equitherm": {
-        "slope": {
+        "n": "N-factor",
-          "title": "Helling",
+        "k": "K-factor",
-          "note": "Compensatie voor warmteverlies. Hoofdafstelparameter."
+        "t": {
-        },
+          "title": "T-factor",
-        "exponent": {
+          "note": "Niet gebruikt als PID is ingeschakeld"
-          "title": "Exponent",
-          "note": "Radiator efficiëntie. Typische waarden: <code>1.1</code> - Vloerverwarming, <code>1.2</code> - Gietijzer, <code>1.3</code> - Paneelradiatoren, <code>1.4</code> - Convectors."
-        },
-        "shift": {
-          "title": "Verschuiving",
-          "note": "Compenseert voor extra warmteverliezen (bijv. in leidingen) of extra warmtebronnen."
-        },
-        "targetDiffFactor": {
-          "title": "T factor",
-          "note": "Niet gebruikt als PID is ingeschakeld. Voegt aan de setpoint de verschil tussen de target en huidige binnentemperatuur toe: <code>setpoint = setpoint + ((target - indoor) * T)</code>."
-        },
-        "chart": {
-          "targetTemp": "Doel binnentemperatuur",
-          "setpointTemp": "Warmtedrager temperatuur",
-          "outdoorTemp": "Buitentemperatuur"
         }
       },
       "pid": {

src_data/locales/ru.json

@@ -358,7 +358,7 @@
       "heating": {
         "hyst": {
           "title": "Гистерезис",
-          "desc": "Гистерезис полезен для поддержания заданной внутр. темп. (при использовании «ПЗА» и/или «ПИД»). Принудительно откл. отопление, когда <code>current indoor > target + value</code>, и вкл. отопление, когда <code>current indoor < (target - value)</code>.",
+          "desc": "Гистерезис полезен для поддержания заданной внутр. темп. (при использовании «Equitherm» и/или «PID»). Принудительно откл. отопление, когда <code>current indoor > target + value</code>, и вкл. отопление, когда <code>current indoor < (target - value)</code>.",
           "value": "Значение <small>(в градусах)</small>",
           "action": {
             "title": "Действие",
@@ -380,26 +380,11 @@
       },
 
       "equitherm": {
-        "slope": {
+        "n": "Коэффициент N",
-          "title": "Наклон",
+        "k": "Коэффициент K",
-          "note": "Компенсация теплопотерь. Основной параметр настройки."
+        "t": {
-        },
-        "exponent": {
-          "title": "Экспонента",
-          "note": "Эффективность радиатора. Типичные значения: <code>1.1</code> - Тёплый пол, <code>1.2</code> - Чугунные радиаторы, <code>1.3</code> - Панельные радиаторы, <code>1.4</code> - Конвекторы."
-        },
-        "shift": {
-          "title": "Смещение",
-          "note": "Компенсирует дополнительные теплопотери (например, в трубах) или дополнительные источники тепла."
-        },
-        "targetDiffFactor": {
           "title": "Коэффициент T",
-          "note": "Не используется, если ПИД включен. Добавляет разницу между целевой и текущей температурой в помещении: <code>setpoint = setpoint + ((target - indoor) * T)</code>."
+          "note": "Не используется, если ПИД включен"
-        },
-        "chart": {
-          "targetTemp": "Целевая внутренняя температура",
-          "setpointTemp": "Температура теплоносителя",
-          "outdoorTemp": "Наружная температура"
         }
       },
 

src_data/pages/sensors.html

@@ -241,9 +241,7 @@
               setCheckboxValue("[name='filtering']", data.filtering, sensorForm);
               setInputValue("[name='filteringFactor']", data.filteringFactor, {}, sensorForm);
 
-              setTimeout(() => {
+              sensorForm.querySelector("[name='type']").dispatchEvent(new Event("change"));
-                sensorForm.querySelector("[name='type']").dispatchEvent(new Event("change"));
-              }, 10);
 
               setBusy(".form-busy", "form", false, sensorNode);
             };

src_data/pages/settings.html

@@ -106,7 +106,7 @@
                       <option disabled selected data-i18n>settings.system.ntp.timezonePresets</option>
                     </select>
                   </div>
-                </label>
+                  </label>
               </fieldset>
 
               <fieldset>
@@ -381,44 +381,21 @@
                 </label>
               </fieldset>
 
-              <div>
-                <div>
-                  <canvas id="etChart"></canvas>
-                </div>
-
-                <label>
-                  <div>
-                    <span data-i18n>settings.equitherm.chart.targetTemp</span>: <b class="etChartTargetTempValue"></b>°
-                  </div>
-                  <input class="etChartTargetTemp" type="range" value="0" min="0" max="0" step="0.5">
-                </label>
-              </div>
-
               <div class="grid">
                 <label>
-                  <span data-i18n>settings.equitherm.slope.title</span>
+                  <span data-i18n>settings.equitherm.n</span>
-                  <input type="number" inputmode="decimal" name="equitherm[slope]" min="0.001" max="10" step="0.001" required>
+                  <input type="number" inputmode="decimal" name="equitherm[n_factor]" min="0.001" max="10" step="0.001" required>
-                  <small data-i18n>settings.equitherm.slope.note</small>
                 </label>
 
                 <label>
-                  <span data-i18n>settings.equitherm.exponent.title</span>
+                  <span data-i18n>settings.equitherm.k</span>
-                  <input type="number" inputmode="decimal" name="equitherm[exponent]" min="0.1" max="2" step="0.001" required>
+                  <input type="number" inputmode="decimal" name="equitherm[k_factor]" min="0" max="10" step="0.01" required>
-                  <small data-i18n>settings.equitherm.exponent.note</small>
-                </label>
-              </div>
-
-              <div class="grid">
-                <label>
-                  <span data-i18n>settings.equitherm.shift.title</span>
-                  <input type="number" inputmode="decimal" name="equitherm[shift]" min="-15" max="15" step="0.01" required>
-                  <small data-i18n>settings.equitherm.shift.note</small>
                 </label>
 
                 <label>
-                  <span data-i18n>settings.equitherm.targetDiffFactor.title</span>
+                  <span data-i18n>settings.equitherm.t.title</span>
-                  <input type="number" inputmode="decimal" name="equitherm[targetDiffFactor]" min="0" max="10" step="0.01" required>
+                  <input type="number" inputmode="decimal" name="equitherm[t_factor]" min="0" max="10" step="0.01" required>
-                  <small data-i18n>settings.equitherm.targetDiffFactor.note</small>
+                  <small data-i18n>settings.equitherm.t.note</small>
                 </label>
               </div>
 
@@ -687,11 +664,6 @@
                       <span data-i18n>settings.ot.options.setDateAndTime</span>
                     </label>
 
-                    <label>
-                      <input type="checkbox" name="opentherm[options][alwaysSetIndoorTemp]" value="true">
-                      <span data-i18n>settings.ot.options.alwaysSetIndoorTemp</span>
-                    </label>
-
                     <label>
                       <input type="checkbox" name="opentherm[options][immergasFix]" value="true">
                       <span data-i18n>settings.ot.options.immergasFix</span>
@@ -921,163 +893,11 @@
     </footer>
 
     <script src="/static/app.js?{BUILD_TIME}"></script>
-    <script src="/static/chart.js?{BUILD_TIME}"></script>
     <script>
       document.addEventListener('DOMContentLoaded', async () => {
         const lang = new Lang(document.getElementById('lang'));
         lang.build();
 
-        let etChart = null;
-        let etChartConfig = {
-          slope: null,
-          exponent: null,
-          shift: null,
-          unitSystem: null,
-          targetTemp: null,
-          minTemp: null,
-          maxTemp: null,
-          decimated: false
-        };
-
-        const hasNeedDecimationChart = () => {
-          return window.innerWidth <= 800;
-        }
-
-        const makeEquithermChart = () => {
-          if (etChart == null) {
-            const ctx = document.getElementById('etChart').getContext('2d');
-
-            try {
-              etChart = new Chart(ctx, {
-                type: 'line',
-                data: {
-                  datasets: [{
-                    borderColor: (context) => {
-                      const chart = context.chart;
-                      const { ctx, chartArea } = chart;
-
-                      if (!chartArea) {
-                        return;
-                      }
-
-                      const gradient = ctx.createLinearGradient(0, chartArea.bottom, 0, chartArea.top);
-                      gradient.addColorStop(0, 'rgba(1, 114, 173, 1)');
-                      gradient.addColorStop(0.5, 'rgba(255, 99, 132, 1)');
-
-                      return gradient;
-                    },
-                    borderWidth: 3,
-                    fill: false,
-                    tension: 0.1,
-                    pointRadius: 2,
-                    pointHoverRadius: 4,
-                    indexAxis: "x",
-                    data: []
-                  }]
-                },
-                options: {
-                  responsive: true,
-                  resizeDelay: 500,
-                  parsing: false,
-                  interaction: {
-                    mode: 'nearest',
-                    intersect: false
-                  },
-                  plugins: {
-                    tooltip: {
-                      enabled: true,
-                      position: 'nearest',
-                      displayColors: false,
-                      callbacks: {
-                        title: (items) => {
-                          return `${i18n("settings.equitherm.chart.outdoorTemp")}: ${items[0].label}`;
-                        }
-                      }
-                    },
-                    legend: {
-                      display: false
-                    }
-                  },
-                  scales: {
-                    x: {
-                      display: true,
-                      type: "linear",
-                      reverse: true,
-                      title: {
-                        display: true
-                      },
-                      ticks: {
-                        stepSize: 1,
-                        format: {
-                          style: "unit",
-                          unit: "degree",
-                          unitDisplay: "narrow"
-                        }
-                      }
-                    },
-                    y: {
-                      display: true,
-                      title: {
-                        display: true
-                      },
-                      ticks: {
-                        format: {
-                          style: "unit",
-                          unit: "degree",
-                          unitDisplay: "narrow"
-                        }
-                      }
-                    }
-                  }
-                }
-              });
-
-            } catch (error) {
-              console.log(error);
-            }
-          }
-
-          if (!etChart) {
-            return;
-          }
-
-          let data = [];
-          etChartConfig.decimated = hasNeedDecimationChart();
-          for (let value = 30; value >= -30; value -= etChartConfig.decimated ? 2 : 1) {
-            const outdoorTemp = etChartConfig.unitSystem == 0 ? value : c2f(value);
-
-            data.push({
-              x: parseFloat(outdoorTemp.toFixed(1)),
-              y: parseFloat(calculateEquithermTemp(outdoorTemp).toFixed(1))
-            });
-          }
-
-          etChart.data.datasets[0].data = data;
-          etChart.data.datasets[0].label = i18n("settings.equitherm.chart.setpointTemp");
-          etChart.options.scales.x.title.text = i18n("settings.equitherm.chart.outdoorTemp");
-          etChart.options.scales.y.title.text = i18n("settings.equitherm.chart.setpointTemp");
-          etChart.update();
-        }
-
-        const calculateEquithermTemp = (outdoorTemp) => {
-          const tempDelta = etChartConfig.targetTemp - outdoorTemp;
-          const maxPoint = etChartConfig.targetTemp - (
-            etChartConfig.maxTemp - etChartConfig.targetTemp
-          ) / etChartConfig.slope;
-
-          const sf = (etChartConfig.maxTemp - etChartConfig.targetTemp) / Math.pow(
-            etChartConfig.targetTemp - maxPoint,
-            1 / etChartConfig.exponent
-          );
-          const result = etChartConfig.targetTemp + etChartConfig.shift + sf * (
-            tempDelta >= 0
-              ? Math.pow(tempDelta, 1 / etChartConfig.exponent)
-              : -(Math.pow(-(tempDelta), 1 / etChartConfig.exponent))
-          );
-
-          return Math.max(Math.min(result, etChartConfig.maxTemp), etChartConfig.minTemp);
-        }
-
         const fillData = (data) => {
           // System
           setSelectValue("[name='system[logLevel]']", data.system.logLevel);
@@ -1122,7 +942,6 @@
           setCheckboxValue("[name='opentherm[options][autoFaultReset]']", data.opentherm.options.autoFaultReset);
           setCheckboxValue("[name='opentherm[options][autoDiagReset]']", data.opentherm.options.autoDiagReset);
           setCheckboxValue("[name='opentherm[options][setDateAndTime]']", data.opentherm.options.setDateAndTime);
-          setCheckboxValue("[name='opentherm[options][alwaysSetIndoorTemp]']", data.opentherm.options.alwaysSetIndoorTemp);
           setCheckboxValue("[name='opentherm[options][nativeHeatingControl]']", data.opentherm.options.nativeHeatingControl);
           setCheckboxValue("[name='opentherm[options][immergasFix]']", data.opentherm.options.immergasFix);
           setBusy('#ot-settings-busy', '#ot-settings', false);
@@ -1229,10 +1048,9 @@
 
           // Equitherm
           setCheckboxValue("[name='equitherm[enabled]']", data.equitherm.enabled);
-          setInputValue("[name='equitherm[slope]']", data.equitherm.slope);
+          setInputValue("[name='equitherm[n_factor]']", data.equitherm.n_factor);
-          setInputValue("[name='equitherm[exponent]']", data.equitherm.exponent);
+          setInputValue("[name='equitherm[k_factor]']", data.equitherm.k_factor);
-          setInputValue("[name='equitherm[shift]']", data.equitherm.shift);
+          setInputValue("[name='equitherm[t_factor]']", data.equitherm.t_factor);
-          setInputValue("[name='equitherm[targetDiffFactor]']", data.equitherm.targetDiffFactor);
           setBusy('#equitherm-settings-busy', '#equitherm-settings', false);
 
           // PID
@@ -1256,24 +1074,6 @@
           setInputValue("[name='pid[deadband][thresholdHigh]']", data.pid.deadband.thresholdHigh);
           setInputValue("[name='pid[deadband][thresholdLow]']", data.pid.deadband.thresholdLow);
           setBusy('#pid-settings-busy', '#pid-settings', false);
-
-          const etMinTemp = parseInt(data.system.unitSystem == 0 ? 5 : 41);
-          const etMaxTemp = parseInt(data.system.unitSystem == 0 ? 30 : 86);
-          const etTargetTemp = constrain(parseFloat(data.heating.target), etMinTemp, etMaxTemp);
-
-          setInputValue(".etChartTargetTemp", etTargetTemp.toFixed(1), {
-            "min": etMinTemp,
-            "max": etMaxTemp
-          });
-
-          etChartConfig.slope = data.equitherm.slope;
-          etChartConfig.exponent = data.equitherm.exponent;
-          etChartConfig.shift = data.equitherm.shift;
-          etChartConfig.unitSystem = data.system.unitSystem;
-          etChartConfig.minTemp = data.heating.minTemp;
-          etChartConfig.maxTemp = data.heating.maxTemp;
-
-          makeEquithermChart();
         };
 
         try {
@@ -1326,57 +1126,6 @@
         } catch (error) {
           console.log(error);
         }
-
-        document.querySelector(".etChartTargetTemp").addEventListener("input", async (event) => {
-          setValue('.etChartTargetTempValue', parseFloat(event.target.value).toFixed(1));
-        });
-
-        document.querySelector(".etChartTargetTemp").addEventListener("change", async (event) => {
-          if (!event.target.checkValidity()) {
-            return;
-          }
-
-          etChartConfig.targetTemp = parseFloat(event.target.value);
-          setValue('.etChartTargetTempValue', etChartConfig.targetTemp.toFixed(1));
-          makeEquithermChart();
-        });
-
-        document.querySelector("[name='equitherm[slope]']").addEventListener("change", async (event) => {
-          if (!event.target.checkValidity()) {
-            return;
-          }
-
-          etChartConfig.slope = parseFloat(event.target.value);
-          makeEquithermChart();
-        });
-
-        document.querySelector("[name='equitherm[exponent]']").addEventListener("change", async (event) => {
-          if (!event.target.checkValidity()) {
-            return;
-          }
-
-          etChartConfig.exponent = parseFloat(event.target.value);
-          makeEquithermChart();
-        });
-
-        document.querySelector("[name='equitherm[shift]']").addEventListener("change", async (event) => {
-          if (!event.target.checkValidity()) {
-            return;
-          }
-
-          etChartConfig.shift = parseFloat(event.target.value);
-          makeEquithermChart();
-        });
-
-        window.addEventListener('resize', async (event) => {
-          if (etChart) {
-            etChart.resize();
-
-            if (etChartConfig.decimated != hasNeedDecimationChart()) {
-              makeEquithermChart();
-            }
-          }
-        });
       });
     </script>
   </body>

src_data/scripts/utils.js

@@ -5,13 +5,8 @@ const setupForm = (formSelector, onResultCallback = null, noCastItems = []) => {
   }
 
   form.querySelectorAll('input').forEach(item => {
-    item.addEventListener('change', (event) => {
+    item.addEventListener('change', (e) => {
-      if (!event.target.checkValidity()) {
+      e.target.setAttribute('aria-invalid', !e.target.checkValidity());
-        event.target.setAttribute('aria-invalid', true);
-
-      } else if (event.target.hasAttribute('aria-invalid')) {
-        event.target.removeAttribute('aria-invalid');
-      }
     })
   });
 
@@ -635,10 +630,6 @@ const setCheckboxValue = (selector, value, parent = undefined) => {
   }
 
   item.checked = value;
-
-  setTimeout(() => {
-    item.dispatchEvent(new Event("change"));
-  }, 10);
 }
 
 const setRadioValue = (selector, value, parent = undefined) => {
@@ -652,14 +643,7 @@ const setRadioValue = (selector, value, parent = undefined) => {
   }
 
   for (let item of items) {
-    const checked = item.value == value;
+    item.checked = item.value == value;
-    if (item.checked != checked) {
-      item.checked = checked;
-
-      setTimeout(() => {
-        item.dispatchEvent(new Event("change"));
-      }, 10);
-    }
   }
 }
 
@@ -674,17 +658,13 @@ const setInputValue = (selector, value, attrs = {}, parent = undefined) => {
   }
 
   for (let item of items) {
+    item.value = value;
+
     if (attrs instanceof Object) {
       for (let attrKey of Object.keys(attrs)) {
         item.setAttribute(attrKey, attrs[attrKey]);
       }
     }
-
-    item.value = value;
-
-    setTimeout(() => {
-      item.dispatchEvent(new Event("change"));
-    }, 10);
   }
 }
 
@@ -874,11 +854,3 @@ function dec2hex(i) {
 function constrain(amt, low, high) {
   return ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt)));
 }
-
-function c2f(value) {
-  return (9 / 5) * value + 32;
-}
-
-function f2c(value) {
-  return (value - 32) * (5 / 9);
-}