refactor: final changes

.gitignore

@@ -1,8 +1,13 @@
 .pio
 .vscode
-build/*.bin
+build/*
 data/*
+managed_components/*
+node_modules/*
 secrets.ini
-node_modules
 package-lock.json
+*.lock
+sdkconfig.*
+CMakeLists.txt
+!sdkconfig.defaults
 !.gitkeep

platformio.ini

@@ -84,7 +84,7 @@ board_build.ldscript = eagle.flash.4m1m.ld
 ;platform_packages = 
 ;  framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git#3.0.5
 ;  framework-arduinoespressif32-libs @ https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.1/esp32-arduino-libs-idf-release_v5.1-33fbade6.zip
-platform = https://github.com/pioarduino/platform-espressif32/releases/download/53.03.12/platform-espressif32.zip
+platform = https://github.com/pioarduino/platform-espressif32/releases/download/53.03.13/platform-espressif32.zip
 platform_packages =
 board_build.partitions = esp32_partitions.csv
 lib_deps =
@@ -287,21 +287,26 @@ build_flags =
 
 [env:esp32_c6]
 platform = ${esp32_defaults.platform}
+framework = arduino, espidf
 platform_packages = ${esp32_defaults.platform_packages}
 board = esp32-c6-devkitm-1
 board_build.partitions = ${esp32_defaults.board_build.partitions}
-lib_deps = 
-	${esp32_defaults.lib_deps}
-	;${esp32_defaults.nimble_lib}
-lib_ignore = ${esp32_defaults.lib_ignore}
+lib_deps = ${esp32_defaults.lib_deps}
+lib_ignore = 
+	${esp32_defaults.lib_ignore}
 extra_scripts = ${esp32_defaults.extra_scripts}
 build_unflags = 
 	-mtext-section-literals
 build_type = ${esp32_defaults.build_type}
 build_flags = 
 	${esp32_defaults.build_flags}
-	; Currently the NimBLE library is incompatible with ESP32 C6
-	;-D USE_BLE=1
+	-D USE_BLE=1
+	-D DEFAULT_OT_IN_GPIO=15
+	-D DEFAULT_OT_OUT_GPIO=23
+	-D DEFAULT_SENSOR_OUTDOOR_GPIO=0
+	-D DEFAULT_SENSOR_INDOOR_GPIO=0
+	-D DEFAULT_STATUS_LED_GPIO=11
+	-D DEFAULT_OT_RX_LED_GPIO=10
 
 [env:otthing] 
 platform = ${esp32_defaults.platform}

sdkconfig.defaults

@@ -0,0 +1,33 @@
+# Source:
+# https://github.com/pioarduino/platform-espressif32/tree/main/examples/espidf-arduino-h2zero-BLE_scan
+
+CONFIG_FREERTOS_HZ=1000
+CONFIG_MBEDTLS_PSK_MODES=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_PSK=y
+CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
+CONFIG_COMPILER_OPTIMIZATION_SIZE=y
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE=y
+
+#
+# BT config
+CONFIG_BT_ENABLED=y
+CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
+CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
+CONFIG_BTDM_CTRL_MODE_BTDM=n
+CONFIG_BT_BLUEDROID_ENABLED=n
+CONFIG_BT_NIMBLE_ENABLED=y
+
+#
+# Arduino Configuration
+CONFIG_AUTOSTART_ARDUINO=y
+CONFIG_ARDUINO_SELECTIVE_COMPILATION=y
+CONFIG_ARDUINO_SELECTIVE_Zigbee=n
+CONFIG_ARDUINO_SELECTIVE_Matter=n
+CONFIG_ARDUINO_SELECTIVE_WiFiProv=n
+CONFIG_ARDUINO_SELECTIVE_BLE=n
+CONFIG_ARDUINO_SELECTIVE_BluetoothSerial=n
+CONFIG_ARDUINO_SELECTIVE_SimpleBLE=n
+CONFIG_ARDUINO_SELECTIVE_RainMaker=n
+CONFIG_ARDUINO_SELECTIVE_OpenThread=n
+CONFIG_ARDUINO_SELECTIVE_Insights=n

src/OpenThermTask.h

@@ -214,7 +214,12 @@ protected:
       );
     }
 
-    if (!vars.slave.connected && millis() - this->lastSuccessResponse < 1325) {
+    // 5 request retries
+    // 1000ms maximum response waiting time
+    // 100ms delay between requests
+    // +15%
+    // 5 * (1000 + 100) * 1.15 = 6325 ms
+    if (!vars.slave.connected && millis() - this->lastSuccessResponse < 6325) {
       Log.sinfoln(
         FPSTR(L_OT),
         F("Connected, downtime: %lu s."),
@@ -224,7 +229,7 @@ protected:
       this->connectedTime = millis();
       vars.slave.connected = true;
       
-    } else if (vars.slave.connected && millis() - this->lastSuccessResponse > 1325) {
+    } else if (vars.slave.connected && millis() - this->lastSuccessResponse > 6325) {
       Log.swarningln(
         FPSTR(L_OT),
         F("Disconnected, uptime: %lu s."),

src/idf_component.yml

@@ -0,0 +1,3 @@
+dependencies:
+  idf: ">=5.3.2"
+  h2zero/esp-nimble-cpp: ">=2.2.1"