chore: bump version to 1.5.5

Baxi Ampera resets the maximum modulation level to 0 when the heating is turned off

platformio.ini

@@ -14,7 +14,7 @@ extra_configs = secrets.default.ini
 core_dir = .pio
 
 [env]
-version = 1.5.4
+version = 1.5.5
 framework = arduino
 lib_deps = 
 	bblanchon/ArduinoJson@^7.3.0
@@ -291,6 +291,11 @@ framework = arduino, espidf
 platform_packages = ${esp32_defaults.platform_packages}
 board = esp32-c6-devkitm-1
 board_build.partitions = ${esp32_defaults.board_build.partitions}
+board_build.embed_txtfiles = 
+	managed_components/espressif__esp_insights/server_certs/https_server.crt
+	managed_components/espressif__esp_rainmaker/server_certs/rmaker_mqtt_server.crt
+	managed_components/espressif__esp_rainmaker/server_certs/rmaker_claim_service_server.crt
+	managed_components/espressif__esp_rainmaker/server_certs/rmaker_ota_server.crt
 lib_deps = ${esp32_defaults.lib_deps}
 lib_ignore = 
 	${esp32_defaults.lib_ignore}

src/OpenThermTask.h

@@ -287,6 +287,15 @@ protected:
       Sensors::setConnectionStatusByType(Sensors::Type::OT_FAN_SPEED_SETPOINT, false);
       Sensors::setConnectionStatusByType(Sensors::Type::OT_FAN_SPEED_CURRENT, false);
 
+      Sensors::setConnectionStatusByType(Sensors::Type::OT_BURNER_STARTS, false);
+      Sensors::setConnectionStatusByType(Sensors::Type::OT_DHW_BURNER_STARTS, false);
+      Sensors::setConnectionStatusByType(Sensors::Type::OT_HEATING_PUMP_STARTS, false);
+      Sensors::setConnectionStatusByType(Sensors::Type::OT_DHW_PUMP_STARTS, false);
+      Sensors::setConnectionStatusByType(Sensors::Type::OT_BURNER_HOURS, false);
+      Sensors::setConnectionStatusByType(Sensors::Type::OT_DHW_BURNER_HOURS, false);
+      Sensors::setConnectionStatusByType(Sensors::Type::OT_HEATING_PUMP_HOURS, false);
+      Sensors::setConnectionStatusByType(Sensors::Type::OT_DHW_PUMP_HOURS, false);
+
       this->initialized = false;
       this->disconnectedTime = millis();
       vars.slave.connected = false;
@@ -342,6 +351,35 @@ protected:
 
     // These parameters will be updated every minute
     if (millis() - this->prevUpdateNonEssentialVars > 60000) {
+      // Set date & time
+      if (settings.opentherm.options.setDateAndTime) {
+        struct tm ti;
+
+        if (getLocalTime(&ti)) {
+          if (this->setYear(&ti)) {
+            Log.sinfoln(FPSTR(L_OT), F("Year of date set successfully"));
+
+          } else {
+            Log.sinfoln(FPSTR(L_OT), F("Failed set year of date"));
+          }
+
+          if (this->setDayAndMonth(&ti)) {
+            Log.sinfoln(FPSTR(L_OT), F("Day and month of date set successfully"));
+
+          } else {
+            Log.sinfoln(FPSTR(L_OT), F("Failed set day and month of date"));
+          }
+
+          if (this->setTime(&ti)) {
+            Log.sinfoln(FPSTR(L_OT), F("Time set successfully"));
+
+          } else {
+            Log.sinfoln(FPSTR(L_OT), F("Failed set time"));
+          }
+        }
+      }
+
+      // Get min modulation level & max power
       if (this->updateMinModulationLevel()) {
         Log.snoticeln(
           FPSTR(L_OT), F("Received min modulation: %hhu%%, max power: %.2f kW"),
@@ -507,6 +545,126 @@ protected:
         vars.slave.diag.code = 0;
       }
 
+      // Update burner starts
+      if (Sensors::getAmountByType(Sensors::Type::OT_BURNER_STARTS, true)) {
+        if (this->updateBurnerStarts()) {
+          Log.snoticeln(FPSTR(L_OT), F("Received burner starts: %hu"), vars.slave.stats.burnerStarts);
+
+          Sensors::setValueByType(
+            Sensors::Type::OT_BURNER_STARTS, vars.slave.stats.burnerStarts,
+            Sensors::ValueType::PRIMARY, true, true
+          );
+
+        } else {
+          Log.swarningln(FPSTR(L_OT), F("Failed receive burner starts"));
+        }
+      }
+
+      // Update DHW burner starts
+      if (Sensors::getAmountByType(Sensors::Type::OT_DHW_BURNER_STARTS, true)) {
+        if (this->updateDhwBurnerStarts()) {
+          Log.snoticeln(FPSTR(L_OT), F("Received DHW burner starts: %hu"), vars.slave.stats.dhwBurnerStarts);
+
+          Sensors::setValueByType(
+            Sensors::Type::OT_DHW_BURNER_STARTS, vars.slave.stats.dhwBurnerStarts,
+            Sensors::ValueType::PRIMARY, true, true
+          );
+
+        } else {
+          Log.swarningln(FPSTR(L_OT), F("Failed receive DHW burner starts"));
+        }
+      }
+
+      // Update heating pump starts
+      if (Sensors::getAmountByType(Sensors::Type::OT_HEATING_PUMP_STARTS, true)) {
+        if (this->updateHeatingPumpStarts()) {
+          Log.snoticeln(FPSTR(L_OT), F("Received heating pump starts: %hu"), vars.slave.stats.heatingPumpStarts);
+
+          Sensors::setValueByType(
+            Sensors::Type::OT_HEATING_PUMP_STARTS, vars.slave.stats.heatingPumpStarts,
+            Sensors::ValueType::PRIMARY, true, true
+          );
+
+        } else {
+          Log.swarningln(FPSTR(L_OT), F("Failed receive heating pump starts"));
+        }
+      }
+
+      // Update DHW pump starts
+      if (Sensors::getAmountByType(Sensors::Type::OT_DHW_PUMP_STARTS, true)) {
+        if (this->updateDhwPumpStarts()) {
+          Log.snoticeln(FPSTR(L_OT), F("Received DHW pump starts: %hu"), vars.slave.stats.dhwPumpStarts);
+
+          Sensors::setValueByType(
+            Sensors::Type::OT_DHW_PUMP_STARTS, vars.slave.stats.dhwPumpStarts,
+            Sensors::ValueType::PRIMARY, true, true
+          );
+
+        } else {
+          Log.swarningln(FPSTR(L_OT), F("Failed receive DHW pump starts"));
+        }
+      }
+
+      // Update burner hours
+      if (Sensors::getAmountByType(Sensors::Type::OT_BURNER_HOURS, true)) {
+        if (this->updateBurnerHours()) {
+          Log.snoticeln(FPSTR(L_OT), F("Received burner hours: %hu"), vars.slave.stats.burnerHours);
+
+          Sensors::setValueByType(
+            Sensors::Type::OT_BURNER_HOURS, vars.slave.stats.burnerHours,
+            Sensors::ValueType::PRIMARY, true, true
+          );
+
+        } else {
+          Log.swarningln(FPSTR(L_OT), F("Failed receive burner hours"));
+        }
+      }
+
+      // Update DHW burner hours
+      if (Sensors::getAmountByType(Sensors::Type::OT_DHW_BURNER_HOURS, true)) {
+        if (this->updateDhwBurnerHours()) {
+          Log.snoticeln(FPSTR(L_OT), F("Received DHW burner hours: %hu"), vars.slave.stats.dhwBurnerHours);
+
+          Sensors::setValueByType(
+            Sensors::Type::OT_DHW_BURNER_HOURS, vars.slave.stats.dhwBurnerHours,
+            Sensors::ValueType::PRIMARY, true, true
+          );
+
+        } else {
+          Log.swarningln(FPSTR(L_OT), F("Failed receive DHW burner hours"));
+        }
+      }
+
+      // Update heating pump hours
+      if (Sensors::getAmountByType(Sensors::Type::OT_HEATING_PUMP_HOURS, true)) {
+        if (this->updateHeatingPumpHours()) {
+          Log.snoticeln(FPSTR(L_OT), F("Received heating pump hours: %hu"), vars.slave.stats.heatingPumpHours);
+
+          Sensors::setValueByType(
+            Sensors::Type::OT_HEATING_PUMP_HOURS, vars.slave.stats.heatingPumpHours,
+            Sensors::ValueType::PRIMARY, true, true
+          );
+
+        } else {
+          Log.swarningln(FPSTR(L_OT), F("Failed receive heating pump hours"));
+        }
+      }
+
+      // Update DHW pump hours
+      if (Sensors::getAmountByType(Sensors::Type::OT_DHW_PUMP_HOURS, true)) {
+        if (this->updateDhwPumpHours()) {
+          Log.snoticeln(FPSTR(L_OT), F("Received DHW pump hours: %hu"), vars.slave.stats.dhwPumpHours);
+
+          Sensors::setValueByType(
+            Sensors::Type::OT_DHW_PUMP_HOURS, vars.slave.stats.dhwPumpHours,
+            Sensors::ValueType::PRIMARY, true, true
+          );
+
+        } else {
+          Log.swarningln(FPSTR(L_OT), F("Failed receive DHW pump hours"));
+        }
+      }
+
       // Auto fault reset
       if (settings.opentherm.options.autoFaultReset && vars.slave.fault.active && !vars.actions.resetFault) {
         vars.actions.resetFault = true;
@@ -529,19 +687,17 @@ protected:
       targetMaxModulation = settings.dhw.maxModulation;
     }
 
-    if (vars.slave.modulation.max != targetMaxModulation) {
-      if (this->setMaxModulationLevel(targetMaxModulation)) {
-        Log.snoticeln(
-          FPSTR(L_OT), F("Set max modulation: %hhu%% (response: %hhu%%)"),
-          targetMaxModulation, vars.slave.modulation.max
-        );
+    if (this->setMaxModulationLevel(targetMaxModulation)) {
+      Log.snoticeln(
+        FPSTR(L_OT), F("Set max modulation: %hhu%% (response: %hhu%%)"),
+        targetMaxModulation, vars.slave.modulation.max
+      );
 
-      } else {
-        Log.swarningln(
-          FPSTR(L_OT), F("Failed set max modulation: %hhu%% (response: %hhu%%)"),
-          targetMaxModulation, vars.slave.modulation.max
-        );
-      }
+    } else {
+      Log.swarningln(
+        FPSTR(L_OT), F("Failed set max modulation: %hhu%% (response: %hhu%%)"),
+        targetMaxModulation, vars.slave.modulation.max
+      );
     }
 
     // Update modulation level
@@ -1265,6 +1421,64 @@ protected:
     return true;
   }
 
+  bool setYear(const struct tm *ptm) {
+    const unsigned int request = (ptm->tm_year + 1900) & 0xFFFF;
+    const unsigned long response = this->instance->sendRequest(CustomOpenTherm::buildRequest(
+      OpenThermRequestType::WRITE_DATA,
+      OpenThermMessageID::Year,
+      request
+    ));
+
+    if (!CustomOpenTherm::isValidResponse(response)) {
+      return false;
+
+    } else if (!CustomOpenTherm::isValidResponseId(response, OpenThermMessageID::Year)) {
+      return false;
+    }
+
+    return CustomOpenTherm::getUInt(response) == request;
+  }
+
+  bool setDayAndMonth(const struct tm *ptm) {
+    const uint8_t month = (ptm->tm_mon + 1) & 0xFF;
+    const unsigned int request = (month << 8) | (ptm->tm_mday & 0xFF);
+    const unsigned long response = this->instance->sendRequest(CustomOpenTherm::buildRequest(
+      OpenThermRequestType::WRITE_DATA,
+      OpenThermMessageID::Date,
+      request
+    ));
+
+    if (!CustomOpenTherm::isValidResponse(response)) {
+      return false;
+
+    } else if (!CustomOpenTherm::isValidResponseId(response, OpenThermMessageID::Date)) {
+      return false;
+    }
+
+    return CustomOpenTherm::getUInt(response) == request;
+  }
+
+  bool setTime(const struct tm *ptm) {
+    const uint8_t dayOfWeek = ptm->tm_wday == 0 ? 6 : ptm->tm_wday - 1;
+    const unsigned int request = ((dayOfWeek & 0x07) << 13)
+      | ((ptm->tm_hour & 0x1F) << 8)
+      | (ptm->tm_min & 0x3F);
+    
+    const unsigned long response = this->instance->sendRequest(CustomOpenTherm::buildRequest(
+      OpenThermRequestType::WRITE_DATA,
+      OpenThermMessageID::DayTime,
+      request
+    ));
+
+    if (!CustomOpenTherm::isValidResponse(response)) {
+      return false;
+
+    } else if (!CustomOpenTherm::isValidResponseId(response, OpenThermMessageID::DayTime)) {
+      return false;
+    }
+
+    return CustomOpenTherm::getUInt(response) == request;
+  }
 
   bool setMaxModulationLevel(const uint8_t value) {
     const unsigned int request = CustomOpenTherm::toFloat(value);
@@ -1677,6 +1891,158 @@ protected:
     return true;
   }
 
+  bool updateBurnerStarts() {
+    const unsigned long response = this->instance->sendRequest(CustomOpenTherm::buildRequest(
+      OpenThermRequestType::READ_DATA,
+      OpenThermMessageID::SuccessfulBurnerStarts,
+      0
+    ));
+
+    if (!CustomOpenTherm::isValidResponse(response)) {
+      return false;
+
+    } else if (!CustomOpenTherm::isValidResponseId(response, OpenThermMessageID::SuccessfulBurnerStarts)) {
+      return false;
+    }
+
+    vars.slave.stats.burnerStarts = CustomOpenTherm::getUInt(response);
+
+    return true;
+  }
+
+  bool updateDhwBurnerStarts() {
+    const unsigned long response = this->instance->sendRequest(CustomOpenTherm::buildRequest(
+      OpenThermRequestType::READ_DATA,
+      OpenThermMessageID::DHWBurnerStarts,
+      0
+    ));
+
+    if (!CustomOpenTherm::isValidResponse(response)) {
+      return false;
+
+    } else if (!CustomOpenTherm::isValidResponseId(response, OpenThermMessageID::DHWBurnerStarts)) {
+      return false;
+    }
+
+    vars.slave.stats.dhwBurnerStarts = CustomOpenTherm::getUInt(response);
+
+    return true;
+  }
+
+  bool updateHeatingPumpStarts() {
+    const unsigned long response = this->instance->sendRequest(CustomOpenTherm::buildRequest(
+      OpenThermRequestType::READ_DATA,
+      OpenThermMessageID::CHPumpStarts,
+      0
+    ));
+
+    if (!CustomOpenTherm::isValidResponse(response)) {
+      return false;
+
+    } else if (!CustomOpenTherm::isValidResponseId(response, OpenThermMessageID::CHPumpStarts)) {
+      return false;
+    }
+
+    vars.slave.stats.heatingPumpStarts = CustomOpenTherm::getUInt(response);
+
+    return true;
+  }
+
+  bool updateDhwPumpStarts() {
+    const unsigned long response = this->instance->sendRequest(CustomOpenTherm::buildRequest(
+      OpenThermRequestType::READ_DATA,
+      OpenThermMessageID::DHWPumpValveStarts,
+      0
+    ));
+
+    if (!CustomOpenTherm::isValidResponse(response)) {
+      return false;
+
+    } else if (!CustomOpenTherm::isValidResponseId(response, OpenThermMessageID::DHWPumpValveStarts)) {
+      return false;
+    }
+
+    vars.slave.stats.dhwPumpStarts = CustomOpenTherm::getUInt(response);
+
+    return true;
+  }
+
+  bool updateBurnerHours() {
+    const unsigned long response = this->instance->sendRequest(CustomOpenTherm::buildRequest(
+      OpenThermRequestType::READ_DATA,
+      OpenThermMessageID::BurnerOperationHours,
+      0
+    ));
+
+    if (!CustomOpenTherm::isValidResponse(response)) {
+      return false;
+
+    } else if (!CustomOpenTherm::isValidResponseId(response, OpenThermMessageID::BurnerOperationHours)) {
+      return false;
+    }
+
+    vars.slave.stats.burnerHours = CustomOpenTherm::getUInt(response);
+
+    return true;
+  }
+
+  bool updateDhwBurnerHours() {
+    const unsigned long response = this->instance->sendRequest(CustomOpenTherm::buildRequest(
+      OpenThermRequestType::READ_DATA,
+      OpenThermMessageID::DHWBurnerOperationHours,
+      0
+    ));
+
+    if (!CustomOpenTherm::isValidResponse(response)) {
+      return false;
+
+    } else if (!CustomOpenTherm::isValidResponseId(response, OpenThermMessageID::DHWBurnerOperationHours)) {
+      return false;
+    }
+
+    vars.slave.stats.dhwBurnerHours = CustomOpenTherm::getUInt(response);
+
+    return true;
+  }
+
+  bool updateHeatingPumpHours() {
+    const unsigned long response = this->instance->sendRequest(CustomOpenTherm::buildRequest(
+      OpenThermRequestType::READ_DATA,
+      OpenThermMessageID::CHPumpOperationHours,
+      0
+    ));
+
+    if (!CustomOpenTherm::isValidResponse(response)) {
+      return false;
+
+    } else if (!CustomOpenTherm::isValidResponseId(response, OpenThermMessageID::CHPumpOperationHours)) {
+      return false;
+    }
+
+    vars.slave.stats.heatingPumpHours = CustomOpenTherm::getUInt(response);
+
+    return true;
+  }
+
+  bool updateDhwPumpHours() {
+    const unsigned long response = this->instance->sendRequest(CustomOpenTherm::buildRequest(
+      OpenThermRequestType::READ_DATA,
+      OpenThermMessageID::DHWPumpValveOperationHours,
+      0
+    ));
+
+    if (!CustomOpenTherm::isValidResponse(response)) {
+      return false;
+
+    } else if (!CustomOpenTherm::isValidResponseId(response, OpenThermMessageID::DHWPumpValveOperationHours)) {
+      return false;
+    }
+
+    vars.slave.stats.dhwPumpHours = CustomOpenTherm::getUInt(response);
+
+    return true;
+  }
+
   bool updateModulationLevel() {
     const unsigned long response = this->instance->sendRequest(CustomOpenTherm::buildRequest(
       OpenThermRequestType::READ_DATA,

src/Sensors.h

@@ -25,6 +25,15 @@ public:
     OT_SOLAR_COLLECTOR_TEMP = 16,
     OT_FAN_SPEED_SETPOINT   = 17,
     OT_FAN_SPEED_CURRENT    = 18,
+
+    OT_BURNER_STARTS        = 19,
+    OT_DHW_BURNER_STARTS    = 20,
+    OT_HEATING_PUMP_STARTS  = 21,
+    OT_DHW_PUMP_STARTS      = 22,
+    OT_BURNER_HOURS         = 23,
+    OT_DHW_BURNER_HOURS     = 24,
+    OT_HEATING_PUMP_HOURS   = 25,
+    OT_DHW_PUMP_HOURS       = 26,
     
     NTC_10K_TEMP            = 50,
     DALLAS_TEMP             = 51,
@@ -46,6 +55,7 @@ public:
     EXHAUST_TEMP          = 7,
     MODULATION_LEVEL      = 8,
 
+    NUMBER                = 247,
     POWER_FACTOR          = 248,
     POWER                 = 249,
     FAN_SPEED             = 250,

src/Settings.h

@@ -76,6 +76,7 @@ struct Settings {
       bool ignoreDiagState = false;
       bool autoFaultReset = false;
       bool autoDiagReset = false;
+      bool setDateAndTime = false;
       bool nativeHeatingControl = false;
       bool immergasFix = false;
     } options;
@@ -353,6 +354,17 @@ struct Variables {
       uint16_t supply = 0;
     } fanSpeed;
 
+    struct {
+      uint16_t burnerStarts = 0;
+      uint16_t dhwBurnerStarts = 0;
+      uint16_t heatingPumpStarts = 0;
+      uint16_t dhwPumpStarts = 0;
+      uint16_t burnerHours = 0;
+      uint16_t dhwBurnerHours = 0;
+      uint16_t heatingPumpHours = 0;
+      uint16_t dhwPumpHours = 0;
+    } stats;
+
     struct {
       bool active = false;
       bool enabled = false;

src/strings.h

@@ -175,6 +175,7 @@ const char S_SENSORS[]                              PROGMEM = "sensors";
 const char S_SERIAL[]                               PROGMEM = "serial";
 const char S_SERVER[]                               PROGMEM = "server";
 const char S_SETTINGS[]                             PROGMEM = "settings";
+const char S_SET_DATE_AND_TIME[]                    PROGMEM = "setDateAndTime";
 const char S_SIGNAL_QUALITY[]                       PROGMEM = "signalQuality";
 const char S_SIZE[]                                 PROGMEM = "size";
 const char S_SLAVE[]                                PROGMEM = "slave";

src/utils.h

@@ -466,6 +466,7 @@ void settingsToJson(const Settings& src, JsonVariant dst, bool safe = false) {
     otOptions[FPSTR(S_IGNORE_DIAG_STATE)] = src.opentherm.options.ignoreDiagState;
     otOptions[FPSTR(S_AUTO_FAULT_RESET)] = src.opentherm.options.autoFaultReset;
     otOptions[FPSTR(S_AUTO_DIAG_RESET)] = src.opentherm.options.autoDiagReset;
+    otOptions[FPSTR(S_SET_DATE_AND_TIME)] = src.opentherm.options.setDateAndTime;
     otOptions[FPSTR(S_NATIVE_HEATING_CONTROL)] = src.opentherm.options.nativeHeatingControl;
     otOptions[FPSTR(S_IMMERGAS_FIX)] = src.opentherm.options.immergasFix;
 
@@ -967,6 +968,15 @@ bool jsonToSettings(const JsonVariantConst src, Settings& dst, bool safe = false
       }
     }
 
+    if (src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_SET_DATE_AND_TIME)].is<bool>()) {
+      bool value = src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_SET_DATE_AND_TIME)].as<bool>();
+
+      if (value != dst.opentherm.options.setDateAndTime) {
+        dst.opentherm.options.setDateAndTime = value;
+        changed = true;
+      }
+    }
+
     if (src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_NATIVE_HEATING_CONTROL)].is<bool>()) {
       bool value = src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_NATIVE_HEATING_CONTROL)].as<bool>();
 
@@ -1723,6 +1733,7 @@ bool jsonToSensorSettings(const uint8_t sensorId, const JsonVariantConst src, Se
       case static_cast<uint8_t>(Sensors::Purpose::EXHAUST_TEMP):
       case static_cast<uint8_t>(Sensors::Purpose::MODULATION_LEVEL):
 
+      case static_cast<uint8_t>(Sensors::Purpose::NUMBER):
       case static_cast<uint8_t>(Sensors::Purpose::POWER_FACTOR):
       case static_cast<uint8_t>(Sensors::Purpose::POWER):
       case static_cast<uint8_t>(Sensors::Purpose::FAN_SPEED):
@@ -1767,6 +1778,15 @@ bool jsonToSensorSettings(const uint8_t sensorId, const JsonVariantConst src, Se
       case static_cast<uint8_t>(Sensors::Type::OT_FAN_SPEED_SETPOINT):
       case static_cast<uint8_t>(Sensors::Type::OT_FAN_SPEED_CURRENT):
 
+      case static_cast<uint8_t>(Sensors::Type::OT_BURNER_STARTS):
+      case static_cast<uint8_t>(Sensors::Type::OT_DHW_BURNER_STARTS):
+      case static_cast<uint8_t>(Sensors::Type::OT_HEATING_PUMP_STARTS):
+      case static_cast<uint8_t>(Sensors::Type::OT_DHW_PUMP_STARTS):
+      case static_cast<uint8_t>(Sensors::Type::OT_BURNER_HOURS):
+      case static_cast<uint8_t>(Sensors::Type::OT_DHW_BURNER_HOURS):
+      case static_cast<uint8_t>(Sensors::Type::OT_HEATING_PUMP_HOURS):
+      case static_cast<uint8_t>(Sensors::Type::OT_DHW_PUMP_HOURS):
+
       case static_cast<uint8_t>(Sensors::Type::NTC_10K_TEMP):
       case static_cast<uint8_t>(Sensors::Type::DALLAS_TEMP):
       case static_cast<uint8_t>(Sensors::Type::BLUETOOTH):

src_data/locales/en.json

@@ -201,6 +201,7 @@
         "dhwFlowRate": "DHW, flow rate",
         "exhaustTemp": "Exhaust temperature",
         "modLevel": "Modulation level (in percents)",
+        "number": "Number (raw)",
         "powerFactor": "Power (in percent)",
         "power": "Power (in kWt)",
         "fanSpeed": "Fan speed",
@@ -231,6 +232,14 @@
         "otSolarCollectorTemp": "OpenTherm, solar collector temp",
         "otFanSpeedSetpoint": "OpenTherm, setpoint fan speed",
         "otFanSpeedCurrent": "OpenTherm, current fan speed",
+        "otBurnerStarts": "OpenTherm, number of burner starts",
+        "otDhwBurnerStarts": "OpenTherm, number of burner starts (DHW)",
+        "otHeatingPumpStarts": "OpenTherm, number of pump starts (heating)",
+        "otDhwPumpStarts": "OpenTherm, number of pump starts (DHW)",
+        "otBurnerHours": "OpenTherm, number of burner operating hours",
+        "otDhwBurnerHours": "OpenTherm, number of burner operating hours (DHW)",
+        "otHeatingPumpHours": "OpenTherm, number of pump operating hours (heating)",
+        "otDhwPumpHours": "OpenTherm, number of pump operating hours (DHW)",
         
         "ntcTemp": "NTC sensor",
         "dallasTemp": "DALLAS sensor",
@@ -400,6 +409,7 @@
           "ignoreDiagState": "Ignore diag state",
           "autoFaultReset": "Auto fault reset <small>(not recommended!)</small>",
           "autoDiagReset": "Auto diag reset <small>(not recommended!)</small>",
+          "setDateAndTime": "Set date & time on boiler",
           "immergasFix": "Fix for Immergas boilers"
         },
 

src_data/locales/it.json

@@ -201,6 +201,7 @@
         "dhwFlowRate": "ACS, prelievo",
         "exhaustTemp": "Temperatura fumi",
         "modLevel": "Livello Modulazione (%)",
+        "number": "Numero (raw)",
         "powerFactor": "Potenza (%)",
         "power": "Potenza (in kW)",
         "fanSpeed": "Velocità ventilatore",
@@ -231,6 +232,14 @@
         "otSolarCollectorTemp": "OpenTherm, temp collettore solare",
         "otFanSpeedSetpoint": "OpenTherm, velocità ventola impostata",
         "otFanSpeedCurrent": "OpenTherm, velocità ventola attuale",
+        "otBurnerStarts": "OpenTherm, numero di avviamenti del bruciatore",
+        "otDhwBurnerStarts": "OpenTherm, numero di avviamenti del bruciatore (ACS)",
+        "otHeatingPumpStarts": "OpenTherm, numero di avviamenti della pompa (riscaldamento)",
+        "otDhwPumpStarts": "OpenTherm, numero di avviamenti della pompa (ACS)",
+        "otBurnerHours": "OpenTherm, numero di ore di funzionamento del bruciatore",
+        "otDhwBurnerHours": "OpenTherm, numero di ore di funzionamento del bruciatore (ACS)",
+        "otHeatingPumpHours": "OpenTherm, numero di ore di funzionamento della pompa (riscaldamento)",
+        "otDhwPumpHours": "OpenTherm, numero di ore di funzionamento della pompa (ACS)",
         
         "ntcTemp": "Sensore NTC",
         "dallasTemp": "Sensore DALLAS",
@@ -400,6 +409,7 @@
           "ignoreDiagState": "Ignora lo stato diagnostico",
           "autoFaultReset": "Ripristino automatico degli errori <small>(sconsigliato!)</small>",
           "autoDiagReset": "Ripristino diagnostico automatica <small>(sconsigliato!)</small>",
+          "setDateAndTime": "Imposta data e ora sulla caldaia",
           "immergasFix": "Fix per caldiaie Immergas"
         },
 

src_data/locales/ru.json

@@ -201,6 +201,7 @@
         "dhwFlowRate": "ГВС, расход/скорость потока",
         "exhaustTemp": "Температура выхлопных газов",
         "modLevel": "Уровень модуляции (в процентах)",
+        "number": "Число (raw)",
         "powerFactor": "Мощность (в процентах)",
         "power": "Мощность (в кВт)",
         "fanSpeed": "Скорость вентилятора",
@@ -231,6 +232,14 @@
         "otSolarCollectorTemp": "OpenTherm, темп. солн. коллектора",
         "otFanSpeedSetpoint": "OpenTherm, установленная мощн. вентилятора",
         "otFanSpeedCurrent": "OpenTherm, текущая мощн. вентилятора",
+        "otBurnerStarts": "OpenTherm, кол-во запусков горелки",
+        "otDhwBurnerStarts": "OpenTherm, кол-во запусков горелки (ГВС)",
+        "otHeatingPumpStarts": "OpenTherm, кол-во запусков насоса (отопление)",
+        "otDhwPumpStarts": "OpenTherm, кол-во запусков насоса (ГВС)",
+        "otBurnerHours": "OpenTherm, кол-во часов работы горелки",
+        "otDhwBurnerHours": "OpenTherm, кол-во часов работы горелки (ГВС)",
+        "otHeatingPumpHours": "OpenTherm, кол-во часов работы насоса (отопление)",
+        "otDhwPumpHours": "OpenTherm, кол-во часов работы насоса (ГВС)",
         
         "ntcTemp": "NTC датчик",
         "dallasTemp": "DALLAS датчик",
@@ -400,6 +409,7 @@
           "ignoreDiagState": "Игнорировать состояние диагностики",
           "autoFaultReset": "Автоматический сброс ошибок <small>(не рекомендуется!)</small>",
           "autoDiagReset": "Автоматический сброс диагностики <small>(не рекомендуется!)</small>",
+          "setDateAndTime": "Устанавливать время и дату на котле",
           "immergasFix": "Фикс для котлов Immergas"
         },
 

src_data/pages/dashboard.html

@@ -261,16 +261,16 @@
 
           <details>
             <summary><b data-i18n>dashboard.section.diag</b></summary>
-            <pre><b>Vendor:</b>             <span class="sVendor"></span>
-<b>Member ID:</b>          <span class="sMemberId"></span>
-<b>Flags:</b>              <span class="sFlags"></span>
-<b>Type:</b>               <span class="sType"></span>
-<b>AppVersion:</b>         <span class="sAppVersion"></span>
-<b>OT version:</b>         <span class="sProtocolVersion"></span>
-<b>Modulation limits:</b>  <span class="sModMin"></span>...<span class="sAbsModMax"></span> %, curr. max: <span class="sModMax"></span> %
-<b>Power limits:</b>       <span class="sPowerMin"></span>...<span class="sPowerMax"></span> kW
-<b>Heating limits:</b>     <span class="sHeatMinTemp"></span>...<span class="sHeatMaxTemp"></span> <span class="tempUnit"></span>
-<b>DHW limits:</b>         <span class="sDhwMinTemp"></span>...<span class="sDhwMaxTemp"></span> <span class="tempUnit"></span></pre>
+            <pre><b>Vendor:</b>         <span class="sVendor"></span>
+<b>Member ID:</b>      <span class="sMemberId"></span>
+<b>Flags:</b>          <span class="sFlags"></span>
+<b>Type:</b>           <span class="sType"></span>
+<b>AppVersion:</b>     <span class="sAppVersion"></span>
+<b>OT version:</b>     <span class="sProtocolVersion"></span>
+<b>Modulation:</b>     min: <span class="sModMin"></span> %, curr. max: <span class="sModMax"></span> %
+<b>Power limits:</b>   <span class="sPowerMin"></span>...<span class="sPowerMax"></span> kW
+<b>Heating limits:</b> <span class="sHeatMinTemp"></span>...<span class="sHeatMaxTemp"></span> <span class="tempUnit"></span>
+<b>DHW limits:</b>     <span class="sDhwMinTemp"></span>...<span class="sDhwMaxTemp"></span> <span class="tempUnit"></span></pre>
           </details>
         </div>
       </article>
@@ -508,7 +508,6 @@
             setValue('.tempUnit', temperatureUnit(unitSystem));
             setValue('.pressureUnit', pressureUnit(unitSystem));
             setValue('.volumeUnit', volumeUnit(unitSystem));
-            setValue('.sAbsModMax', result.opentherm.maxModulation);
 
           } catch (error) {
             console.log(error);

src_data/pages/sensors.html

@@ -69,6 +69,7 @@
                       <option value="6" data-i18n>sensors.purposes.dhwFlowRate</option>
                       <option value="7" data-i18n>sensors.purposes.exhaustTemp</option>
                       <option value="8" data-i18n>sensors.purposes.modLevel</option>
+                      <option value="247" data-i18n>sensors.purposes.number</option>
                       <option value="248" data-i18n>sensors.purposes.powerFactor</option>
                       <option value="249" data-i18n>sensors.purposes.power</option>
                       <option value="250" data-i18n>sensors.purposes.fanSpeed</option>
@@ -102,6 +103,14 @@
                       <option value="16" data-i18n>sensors.types.otSolarCollectorTemp</option>
                       <option value="17" data-i18n>sensors.types.otFanSpeedSetpoint</option>
                       <option value="18" data-i18n>sensors.types.otFanSpeedCurrent</option>
+                      <option value="19" data-i18n>sensors.types.otBurnerStarts</option>
+                      <option value="20" data-i18n>sensors.types.otDhwBurnerStarts</option>
+                      <option value="21" data-i18n>sensors.types.otHeatingPumpStarts</option>
+                      <option value="22" data-i18n>sensors.types.otDhwPumpStarts</option>
+                      <option value="23" data-i18n>sensors.types.otBurnerHours</option>
+                      <option value="24" data-i18n>sensors.types.otDhwBurnerHours</option>
+                      <option value="25" data-i18n>sensors.types.otHeatingPumpHours</option>
+                      <option value="26" data-i18n>sensors.types.otDhwPumpHours</option>
 
                       <option value="50" data-i18n>sensors.types.ntcTemp</option>
                       <option value="51" data-i18n>sensors.types.dallasTemp</option>

src_data/pages/settings.html

@@ -551,6 +551,11 @@
                   <span data-i18n>settings.ot.options.autoDiagReset</span>
                 </label>
 
+                <label>
+                  <input type="checkbox" name="opentherm[options][setDateAndTime]" value="true">
+                  <span data-i18n>settings.ot.options.setDateAndTime</span>
+                </label>
+
                 <label>
                   <input type="checkbox" name="opentherm[options][immergasFix]" value="true">
                   <span data-i18n>settings.ot.options.immergasFix</span>
@@ -818,6 +823,7 @@
           setCheckboxValue("[name='opentherm[options][ignoreDiagState]']", data.opentherm.options.ignoreDiagState);
           setCheckboxValue("[name='opentherm[options][autoFaultReset]']", data.opentherm.options.autoFaultReset);
           setCheckboxValue("[name='opentherm[options][autoDiagReset]']", data.opentherm.options.autoDiagReset);
+          setCheckboxValue("[name='opentherm[options][setDateAndTime]']", data.opentherm.options.setDateAndTime);
           setCheckboxValue("[name='opentherm[options][nativeHeatingControl]']", data.opentherm.options.nativeHeatingControl);
           setCheckboxValue("[name='opentherm[options][immergasFix]']", data.opentherm.options.immergasFix);
           setBusy('#ot-settings-busy', '#ot-settings', false);