chore: bump version to 1.4.2

README.md

@@ -31,7 +31,6 @@
   - The current temperature of the heat carrier (usually the return heat carrier)
   - Set heat carrier temperature (depending on the selected mode)
   - Current hot water temperature
-- Auto tuning of PID and Equitherm parameters *(in development)*
 - [Home Assistant](https://www.home-assistant.io/) integration via MQTT. The ability to create any automation for the boiler!
 
 ![logo](/assets/ha.png)

lib/CustomOpenTherm/CustomOpenTherm.h

@@ -126,6 +126,36 @@ public:
     return isValidResponse(response);
   }
 
+  bool setRoomSetpoint(float temperature) {
+    unsigned long response = this->sendRequest(buildRequest(
+      OpenThermMessageType::WRITE_DATA,
+      OpenThermMessageID::TrSet,
+      temperatureToData(temperature)
+    ));
+
+    return isValidResponse(response);
+  }
+
+  bool setRoomSetpointCh2(float temperature) {
+    unsigned long response = this->sendRequest(buildRequest(
+      OpenThermMessageType::WRITE_DATA,
+      OpenThermMessageID::TrSetCH2,
+      temperatureToData(temperature)
+    ));
+
+    return isValidResponse(response);
+  }
+
+  bool setRoomTemp(float temperature) {
+    unsigned long response = this->sendRequest(buildRequest(
+      OpenThermMessageType::WRITE_DATA,
+      OpenThermMessageID::Tr,
+      temperatureToData(temperature)
+    ));
+
+    return isValidResponse(response);
+  }
+
   bool sendBoilerReset() {
     unsigned int data = 1;
     data <<= 8;

lib/NetworkUtils/NetworkConnection.cpp

@@ -1,54 +1,58 @@
 #include "NetworkConnection.h"
-using namespace Network;
+using namespace NetworkUtils;
 
-void Connection::setup(bool useDhcp) {
+void NetworkConnection::setup(bool useDhcp) {
   setUseDhcp(useDhcp);
 
   #if defined(ARDUINO_ARCH_ESP8266)
-  wifi_set_event_handler_cb(Connection::onEvent);
+  wifi_set_event_handler_cb(NetworkConnection::onEvent);
   #elif defined(ARDUINO_ARCH_ESP32)
-  WiFi.onEvent(Connection::onEvent);
+  WiFi.onEvent(NetworkConnection::onEvent);
   #endif
 }
 
-void Connection::reset() {
+void NetworkConnection::reset() {
   status = Status::NONE;
+  rawDisconnectReason = 0;
   disconnectReason = DisconnectReason::NONE;
 }
 
-void Connection::setUseDhcp(bool value) {
+void NetworkConnection::setUseDhcp(bool value) {
   useDhcp = value;
 }
 
-Connection::Status Connection::getStatus() {
+NetworkConnection::Status NetworkConnection::getStatus() {
   return status;
 }
 
-Connection::DisconnectReason Connection::getDisconnectReason() {
+NetworkConnection::DisconnectReason NetworkConnection::getDisconnectReason() {
   return disconnectReason;
 }
 
 #if defined(ARDUINO_ARCH_ESP8266)
-void Connection::onEvent(System_Event_t *event) {
+void NetworkConnection::onEvent(System_Event_t *event) {
   switch (event->event) {
     case EVENT_STAMODE_CONNECTED:
       status = useDhcp ? Status::CONNECTING : Status::CONNECTED;
+      rawDisconnectReason = 0;
       disconnectReason = DisconnectReason::NONE;
-      
       break;
 
     case EVENT_STAMODE_GOT_IP:
       status = Status::CONNECTED;
+      rawDisconnectReason = 0;
       disconnectReason = DisconnectReason::NONE;
       break;
 
     case EVENT_STAMODE_DHCP_TIMEOUT:
       status = Status::DISCONNECTED;
+      rawDisconnectReason = 0;
       disconnectReason = DisconnectReason::DHCP_TIMEOUT;
       break;
 
     case EVENT_STAMODE_DISCONNECTED:
       status = Status::DISCONNECTED;
+      rawDisconnectReason = event->event_info.disconnected.reason;
       disconnectReason = convertDisconnectReason(event->event_info.disconnected.reason);
 
       // https://github.com/esp8266/Arduino/blob/d5eb265f78bff9deb7063d10030a02d021c8c66c/libraries/ESP8266WiFi/src/ESP8266WiFiGeneric.cpp#L231
@@ -63,6 +67,7 @@ void Connection::onEvent(System_Event_t *event) {
         auto& src = event->event_info.auth_change;
         if ((src.old_mode != AUTH_OPEN) && (src.new_mode == AUTH_OPEN)) {
           status = Status::DISCONNECTED;
+          rawDisconnectReason = 0;
           disconnectReason = DisconnectReason::OTHER;
 
           wifi_station_disconnect();
@@ -75,29 +80,31 @@ void Connection::onEvent(System_Event_t *event) {
   }
 }
 #elif defined(ARDUINO_ARCH_ESP32)
-void Connection::onEvent(WiFiEvent_t event, WiFiEventInfo_t info) {
+void NetworkConnection::onEvent(WiFiEvent_t event, WiFiEventInfo_t info) {
   switch (event) {
     case ARDUINO_EVENT_WIFI_STA_CONNECTED:
       status = useDhcp ? Status::CONNECTING : Status::CONNECTED;
+      rawDisconnectReason = 0;
       disconnectReason = DisconnectReason::NONE;
-      
       break;
 
     case ARDUINO_EVENT_WIFI_STA_GOT_IP:
     case ARDUINO_EVENT_WIFI_STA_GOT_IP6:
       status = Status::CONNECTED;
+      rawDisconnectReason = 0;
       disconnectReason = DisconnectReason::NONE;
       break;
 
     case ARDUINO_EVENT_WIFI_STA_LOST_IP:
       status = Status::DISCONNECTED;
+      rawDisconnectReason = 0;
       disconnectReason = DisconnectReason::DHCP_TIMEOUT;
       break;
 
     case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
       status = Status::DISCONNECTED;
+      rawDisconnectReason = info.wifi_sta_disconnected.reason;
       disconnectReason = convertDisconnectReason(info.wifi_sta_disconnected.reason);
-
       break;
     
     default:
@@ -106,7 +113,7 @@ void Connection::onEvent(WiFiEvent_t event, WiFiEventInfo_t info) {
 }
 #endif
 
-Connection::DisconnectReason Connection::convertDisconnectReason(uint8_t reason) {
+NetworkConnection::DisconnectReason NetworkConnection::convertDisconnectReason(uint8_t reason) {
   switch (reason) {
   #if defined(ARDUINO_ARCH_ESP8266)
     case REASON_BEACON_TIMEOUT:
@@ -145,6 +152,7 @@ Connection::DisconnectReason Connection::convertDisconnectReason(uint8_t reason)
   }
 }
 
-bool Connection::useDhcp = false;
+bool NetworkConnection::useDhcp = false;
-Connection::Status Connection::status = Status::NONE;
+NetworkConnection::Status NetworkConnection::status = Status::NONE;
-Connection::DisconnectReason Connection::disconnectReason = DisconnectReason::NONE;
+NetworkConnection::DisconnectReason NetworkConnection::disconnectReason = DisconnectReason::NONE;
+uint8_t NetworkConnection::rawDisconnectReason = 0;

lib/NetworkUtils/NetworkConnection.h

@@ -5,8 +5,8 @@
   #include <WiFi.h>
 #endif
 
-namespace Network {
+namespace NetworkUtils {
-  struct Connection {
+  struct NetworkConnection {
     enum class Status {
       CONNECTED,
       CONNECTING,
@@ -27,6 +27,7 @@ namespace Network {
 
     static Status status;
     static DisconnectReason disconnectReason;
+    static uint8_t rawDisconnectReason;
     
     static void setup(bool useDhcp);
     static void setUseDhcp(bool value);

lib/NetworkUtils/NetworkMgr.h

@@ -7,35 +7,35 @@
 #endif
 #include <NetworkConnection.h>
 
-namespace Network {
+namespace NetworkUtils {
-  class Manager {
+  class NetworkMgr {
   public:
     typedef std::function<void()> YieldCallback;
     typedef std::function<void(unsigned int)> DelayCallback;
 
-    Manager() {
+    NetworkMgr() {
-      Connection::setup(this->useDhcp);
+      NetworkConnection::setup(this->useDhcp);
       this->resetWifi();
     }
 
-    Manager* setYieldCallback(YieldCallback callback = nullptr) {
+    NetworkMgr* setYieldCallback(YieldCallback callback = nullptr) {
       this->yieldCallback = callback;
 
       return this;
     }
 
-    Manager* setDelayCallback(DelayCallback callback = nullptr) {
+    NetworkMgr* setDelayCallback(DelayCallback callback = nullptr) {
       this->delayCallback = callback;
 
       return this;
     }
 
-    Manager* setHostname(const char* value) {
+    NetworkMgr* setHostname(const char* value) {
       this->hostname = value;
       return this;
     }
 
-    Manager* setApCredentials(const char* ssid, const char* password = nullptr, byte channel = 0) {
+    NetworkMgr* setApCredentials(const char* ssid, const char* password = nullptr, byte channel = 0) {
       this->apName = ssid;
       this->apPassword = password;
       this->apChannel = channel;
@@ -43,7 +43,7 @@ namespace Network {
       return this;
     }
 
-    Manager* setStaCredentials(const char* ssid = nullptr, const char* password = nullptr, byte channel = 0) {
+    NetworkMgr* setStaCredentials(const char* ssid = nullptr, const char* password = nullptr, byte channel = 0) {
       this->staSsid = ssid;
       this->staPassword = password;
       this->staChannel = channel;
@@ -51,14 +51,14 @@ namespace Network {
       return this;
     }
 
-    Manager* setUseDhcp(bool value) {
+    NetworkMgr* setUseDhcp(bool value) {
       this->useDhcp = value;
-      Connection::setup(this->useDhcp);
+      NetworkConnection::setup(this->useDhcp);
 
       return this;
     }
 
-    Manager* setStaticConfig(const char* ip, const char* gateway, const char* subnet, const char* dns) {
+    NetworkMgr* setStaticConfig(const char* ip, const char* gateway, const char* subnet, const char* dns) {
       this->staticIp.fromString(ip);
       this->staticGateway.fromString(gateway);
       this->staticSubnet.fromString(subnet);
@@ -67,7 +67,7 @@ namespace Network {
       return this;
     }
 
-    Manager* setStaticConfig(IPAddress& ip, IPAddress& gateway, IPAddress& subnet, IPAddress& dns) {
+    NetworkMgr* setStaticConfig(IPAddress& ip, IPAddress& gateway, IPAddress& subnet, IPAddress& dns) {
       this->staticIp = ip;
       this->staticGateway = gateway;
       this->staticSubnet = subnet;
@@ -81,11 +81,11 @@ namespace Network {
     }
 
     bool isConnected() {
-      return this->isStaEnabled() && Connection::getStatus() == Connection::Status::CONNECTED;
+      return this->isStaEnabled() && NetworkConnection::getStatus() == NetworkConnection::Status::CONNECTED;
     }
 
     bool isConnecting() {
-      return this->isStaEnabled() && Connection::getStatus() == Connection::Status::CONNECTING;
+      return this->isStaEnabled() && NetworkConnection::getStatus() == NetworkConnection::Status::CONNECTING;
     }
 
     bool isStaEnabled() {
@@ -147,16 +147,19 @@ namespace Network {
     bool resetWifi() {
       // set policy manual for work 13 ch
       {
-        wifi_country_t country = {"CN", 1, 13, WIFI_COUNTRY_POLICY_MANUAL};
         #ifdef ARDUINO_ARCH_ESP8266
+        wifi_country_t country = {"CN", 1, 13, WIFI_COUNTRY_POLICY_AUTO};
         wifi_set_country(&country);
         #elif defined(ARDUINO_ARCH_ESP32)
+        const wifi_country_t country = {"CN", 1, 13, CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER, WIFI_COUNTRY_POLICY_AUTO};
         esp_wifi_set_country(&country);
         #endif
       }
 
       WiFi.persistent(false);
+      #if !defined(ESP_ARDUINO_VERSION_MAJOR) || ESP_ARDUINO_VERSION_MAJOR < 3
       WiFi.setAutoConnect(false);
+      #endif
       WiFi.setAutoReconnect(false);
 
       #ifdef ARDUINO_ARCH_ESP8266
@@ -181,8 +184,8 @@ namespace Network {
       wifi_station_dhcpc_set_maxtry(5);
       #endif
       
-      #ifdef ARDUINO_ARCH_ESP32
+      #if defined(ARDUINO_ARCH_ESP32) && ESP_ARDUINO_VERSION_MAJOR < 3
-      // Nothing. Because memory leaks when turn off WiFi on ESP32, bug?
+      // Nothing. Because memory leaks when turn off WiFi on ESP32 SDK < 3.0.0
       return true;
       #else
       return WiFi.mode(WIFI_OFF);
@@ -200,6 +203,7 @@ namespace Network {
 
       if (force && !this->isApEnabled()) {
         this->resetWifi();
+        NetworkConnection::reset();
 
       } else {
         /*#ifdef ARDUINO_ARCH_ESP8266
@@ -208,14 +212,14 @@ namespace Network {
         }
         #endif*/
 
-        WiFi.disconnect(false, true);
+        this->disconnect();
       }
 
       if (!this->hasStaCredentials()) {
         return false;
       }
 
-      this->delayCallback(200);
+      this->delayCallback(250);
 
       #ifdef ARDUINO_ARCH_ESP32
       if (this->setWifiHostname(this->hostname)) {
@@ -230,7 +234,7 @@ namespace Network {
         return false;
       }
 
-      this->delayCallback(200);
+      this->delayCallback(250);
 
       #ifdef ARDUINO_ARCH_ESP8266
       if (this->setWifiHostname(this->hostname)) {
@@ -240,7 +244,7 @@ namespace Network {
         Log.serrorln(FPSTR(L_NETWORK), F("Set hostname '%s': fail"), this->hostname);
       }
 
-      this->delayCallback(200);
+      this->delayCallback(250);
       #endif
 
       if (!this->useDhcp) {
@@ -253,23 +257,36 @@ namespace Network {
       while (millis() - beginConnectionTime < timeout) {
         this->delayCallback(100);
 
-        Connection::Status status = Connection::getStatus();
+        NetworkConnection::Status status = NetworkConnection::getStatus();
-        if (status != Connection::Status::CONNECTING && status != Connection::Status::NONE) {
+        if (status != NetworkConnection::Status::CONNECTING && status != NetworkConnection::Status::NONE) {
-          return status == Connection::Status::CONNECTED;
+          return status == NetworkConnection::Status::CONNECTED;
         }
       }
 
       return false;
     }
 
+    void disconnect() {
+      WiFi.disconnect(false, true);
+    }
+
     void loop() {
-      if (this->isConnected() && !this->hasStaCredentials()) {
+      if (this->reconnectFlag) {
+        this->delayCallback(5000);
+
+        Log.sinfoln(FPSTR(L_NETWORK), F("Reconnecting..."));
+        this->reconnectFlag = false;
+        this->disconnect();
+        NetworkConnection::reset();
+        this->delayCallback(1000);
+
+      } else if (this->isConnected() && !this->hasStaCredentials()) {
         Log.sinfoln(FPSTR(L_NETWORK), F("Reset"));
         this->resetWifi();
-        Connection::reset();
+        NetworkConnection::reset();
-        this->delayCallback(200);
+        this->delayCallback(1000);
 
-      } else if (this->isConnected() && !this->reconnectFlag) {
+      } else if (this->isConnected()) {
         if (!this->connected) {
           this->connectedTime = millis();
           this->connected = true;
@@ -284,7 +301,7 @@ namespace Network {
         }
 
         if (this->isApEnabled() && millis() - this->connectedTime > this->reconnectInterval && !this->hasApClients()) {
-          Log.sinfoln(FPSTR(L_NETWORK), F("Stop AP because connected, start only STA"));
+          Log.sinfoln(FPSTR(L_NETWORK), F("Stop AP because STA connected"));
 
           WiFi.mode(WIFI_STA);
           return;
@@ -305,7 +322,7 @@ namespace Network {
           Log.sinfoln(
             FPSTR(L_NETWORK),
             F("Disconnected, reason: %d, uptime: %lu s."),
-            Connection::getDisconnectReason(),
+            NetworkConnection::getDisconnectReason(),
             (millis() - this->connectedTime) / 1000
           );
         }
@@ -327,16 +344,15 @@ namespace Network {
         } else if (this->isConnecting() && millis() - this->prevReconnectingTime > this->resetConnectionTimeout) {
           Log.swarningln(FPSTR(L_NETWORK), F("Connection timeout, reset wifi..."));
           this->resetWifi();
-          Connection::reset();
+          NetworkConnection::reset();
-          this->delayCallback(200);
+          this->delayCallback(250);
 
         } else if (!this->isConnecting() && this->hasStaCredentials() && (!this->prevReconnectingTime || millis() - this->prevReconnectingTime > this->reconnectInterval)) {
           Log.sinfoln(FPSTR(L_NETWORK), F("Try connect..."));
 
-          this->reconnectFlag = false;
+          NetworkConnection::reset();
-          Connection::reset();
           if (!this->connect(true, this->connectionTimeout)) {
-            Log.straceln(FPSTR(L_NETWORK), F("Connection failed. Status: %d, reason: %d"), Connection::getStatus(), Connection::getDisconnectReason());
+            Log.straceln(FPSTR(L_NETWORK), F("Connection failed. Status: %d, reason: %d, raw reason: %d"), NetworkConnection::getStatus(), NetworkConnection::getDisconnectReason(), NetworkConnection::rawDisconnectReason);
           }
 
           this->prevReconnectingTime = millis();

platformio.ini

@@ -13,24 +13,29 @@
 extra_configs = secrets.default.ini
 
 [env]
+version = 1.4.2
 framework = arduino
 lib_deps = 
 	bblanchon/ArduinoJson@^7.0.4
 	;ihormelnyk/OpenTherm Library@^1.1.5
-	https://github.com/Laxilef/opentherm_library/archive/refs/heads/fix_lambda.zip
+	https://github.com/ihormelnyk/opentherm_library#master
 	arduino-libraries/ArduinoMqttClient@^0.1.8
 	lennarthennigs/ESP Telnet@^2.2
 	gyverlibs/FileData@^1.0.2
 	gyverlibs/GyverPID@^3.3.2
 	gyverlibs/GyverBlinker@^1.0
+	https://github.com/PaulStoffregen/OneWire#master
 	milesburton/DallasTemperature@^3.11.0
 	laxilef/TinyLogger@^1.1.0
 build_flags = 
 	-D PIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY
+	;-D PIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
 	-D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
 	-mtext-section-literals
 	-D MQTT_CLIENT_STD_FUNCTION_CALLBACK=1
 	;-D DEBUG_ESP_CORE -D DEBUG_ESP_WIFI -D DEBUG_ESP_HTTP_SERVER -D DEBUG_ESP_PORT=Serial
+	-D BUILD_VERSION='"${this.version}"'
+	-D BUILD_ENV='"$PIOENV"'
 	-D USE_SERIAL=${secrets.use_serial}
 	-D USE_TELNET=${secrets.use_telnet}
 	-D DEBUG_BY_DEFAULT=${secrets.debug}
@@ -51,11 +56,10 @@ monitor_speed = 115200
 monitor_filters = direct
 board_build.flash_mode = dio
 board_build.filesystem = littlefs
-version = 1.4.0-rc.22
 
 ; Defaults
 [esp8266_defaults]
-platform = espressif8266
+platform = espressif8266@^4.2.1
 lib_deps = 
 	${env.lib_deps}
 	nrwiersma/ESP8266Scheduler@^1.2
@@ -66,7 +70,12 @@ build_flags = ${env.build_flags}
 board_build.ldscript = eagle.flash.4m1m.ld
 
 [esp32_defaults]
-platform = espressif32@^6.6
+;platform = espressif32@^6.7
+platform = https://github.com/platformio/platform-espressif32.git
+platform_packages =
+  ;platformio/framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32/archive/refs/tags/2.0.17.zip
+  framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git#3.0.1
+  framework-arduinoespressif32-libs @ https://github.com/espressif/arduino-esp32/releases/download/3.0.1/esp32-arduino-libs-3.0.1.zip
 board_build.partitions = esp32_partitions.csv
 lib_deps =
 	${env.lib_deps}
@@ -129,15 +138,36 @@ build_flags =
 	-D DEFAULT_STATUS_LED_GPIO=13
 	-D DEFAULT_OT_RX_LED_GPIO=15
 
+[env:nodemcu_8266]
+platform = ${esp8266_defaults.platform}
+board = nodemcuv2
+lib_deps = ${esp8266_defaults.lib_deps}
+lib_ignore = ${esp8266_defaults.lib_ignore}
+extra_scripts = ${esp8266_defaults.extra_scripts}
+board_build.ldscript = ${esp8266_defaults.board_build.ldscript}
+build_flags = 
+	${esp8266_defaults.build_flags}
+	-D DEFAULT_OT_IN_GPIO=13
+	-D DEFAULT_OT_OUT_GPIO=15
+	-D DEFAULT_SENSOR_OUTDOOR_GPIO=12
+	-D DEFAULT_SENSOR_INDOOR_GPIO=4
+	-D DEFAULT_STATUS_LED_GPIO=2
+	-D DEFAULT_OT_RX_LED_GPIO=16
+
 [env:s2_mini]
 platform = ${esp32_defaults.platform}
+platform_packages = ${esp32_defaults.platform_packages}
 board = lolin_s2_mini
 board_build.partitions = ${esp32_defaults.board_build.partitions}
 lib_deps = ${esp32_defaults.lib_deps}
 lib_ignore = ${esp32_defaults.lib_ignore}
 extra_scripts = ${esp32_defaults.extra_scripts}
+build_unflags =
+	-DARDUINO_USB_MODE=1
 build_flags = 
 	${esp32_defaults.build_flags}
+	-D ARDUINO_USB_MODE=0
+	-D ARDUINO_USB_CDC_ON_BOOT=1
 	-D DEFAULT_OT_IN_GPIO=33
 	-D DEFAULT_OT_OUT_GPIO=35
 	-D DEFAULT_SENSOR_OUTDOOR_GPIO=9
@@ -147,6 +177,7 @@ build_flags =
 
 [env:s3_mini] 
 platform = ${esp32_defaults.platform}
+platform_packages = ${esp32_defaults.platform_packages}
 board = lolin_s3_mini
 board_build.partitions = ${esp32_defaults.board_build.partitions}
 lib_deps = 
@@ -154,8 +185,12 @@ lib_deps =
 	h2zero/NimBLE-Arduino@^1.4.1
 lib_ignore = ${esp32_defaults.lib_ignore}
 extra_scripts = ${esp32_defaults.extra_scripts}
+build_unflags =
+	-DARDUINO_USB_MODE=1
 build_flags = 
 	${esp32_defaults.build_flags}
+	-D ARDUINO_USB_MODE=0
+	-D ARDUINO_USB_CDC_ON_BOOT=1
 	-D USE_BLE=1
 	-D DEFAULT_OT_IN_GPIO=35
 	-D DEFAULT_OT_OUT_GPIO=36
@@ -166,6 +201,7 @@ build_flags =
 
 [env:c3_mini] 
 platform = ${esp32_defaults.platform}
+platform_packages = ${esp32_defaults.platform_packages}
 board = lolin_c3_mini
 board_build.partitions = ${esp32_defaults.board_build.partitions}
 lib_deps = 
@@ -185,8 +221,9 @@ build_flags =
 	-D DEFAULT_STATUS_LED_GPIO=4
 	-D DEFAULT_OT_RX_LED_GPIO=5
 
-[env:nodemcu_32s]
+[env:nodemcu_32]
 platform = ${esp32_defaults.platform}
+platform_packages = ${esp32_defaults.platform_packages}
 board = nodemcu-32s
 board_build.partitions = ${esp32_defaults.board_build.partitions}
 lib_deps = 
@@ -197,16 +234,17 @@ extra_scripts = ${esp32_defaults.extra_scripts}
 build_flags = 
 	${esp32_defaults.build_flags}
 	-D USE_BLE=1
-	-D DEFAULT_OT_IN_GPIO=21
+	-D DEFAULT_OT_IN_GPIO=16
-	-D DEFAULT_OT_OUT_GPIO=22
+	-D DEFAULT_OT_OUT_GPIO=4
-	-D DEFAULT_SENSOR_OUTDOOR_GPIO=12
+	-D DEFAULT_SENSOR_OUTDOOR_GPIO=15
-	-D DEFAULT_SENSOR_INDOOR_GPIO=13
+	-D DEFAULT_SENSOR_INDOOR_GPIO=26
-	-D DEFAULT_STATUS_LED_GPIO=2 ; 18
+	-D DEFAULT_STATUS_LED_GPIO=2
 	-D DEFAULT_OT_RX_LED_GPIO=19
 	;-D WOKWI=1
 
 [env:d1_mini32]
 platform = ${esp32_defaults.platform}
+platform_packages = ${esp32_defaults.platform_packages}
 board = wemos_d1_mini32
 board_build.partitions = ${esp32_defaults.board_build.partitions}
 lib_deps = 

src/HaHelper.h

@@ -6,107 +6,6 @@ public:
   static const byte TEMP_SOURCE_HEATING = 0;
   static const byte TEMP_SOURCE_INDOOR = 1;
 
-  bool publishSwitchEmergency(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getObjectId(F("emergency"));
-    doc[FPSTR(HA_OBJECT_ID)] = this->getObjectId(F("emergency"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = F("config");
-    doc[FPSTR(HA_NAME)] = F("Use emergency");
-    doc[FPSTR(HA_ICON)] = F("mdi:sun-snowflake-variant");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_STATE_ON)] = true;
-    doc[FPSTR(HA_STATE_OFF)] = false;
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.emergency.enable }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
-    doc[FPSTR(HA_PAYLOAD_ON)] = F("{\"emergency\": {\"enable\" : true}}");
-    doc[FPSTR(HA_PAYLOAD_OFF)] = F("{\"emergency\": {\"enable\" : false}}");
-    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
-    doc.shrinkToFit();
-
-    return this->publish(this->getTopic(FPSTR(HA_ENTITY_SWITCH), F("emergency")).c_str(), doc);
-  }
-
-  bool publishNumberEmergencyTarget(UnitSystem unit = UnitSystem::METRIC, bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getObjectId(F("emergency_target"));
-    doc[FPSTR(HA_OBJECT_ID)] = this->getObjectId(F("emergency_target"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = F("config");
-    doc[FPSTR(HA_DEVICE_CLASS)] = F("temperature");
-
-    if (unit == UnitSystem::METRIC) {
-      doc[FPSTR(HA_UNIT_OF_MEASUREMENT)] = FPSTR(HA_UNIT_OF_MEASUREMENT_C);
-      doc[FPSTR(HA_MIN)] = 5;
-      doc[FPSTR(HA_MAX)] = 50;
-
-    } else if (unit == UnitSystem::IMPERIAL) {
-      doc[FPSTR(HA_UNIT_OF_MEASUREMENT)] = FPSTR(HA_UNIT_OF_MEASUREMENT_F);
-      doc[FPSTR(HA_MIN)] = 41;
-      doc[FPSTR(HA_MAX)] = 122;
-    }
-    
-    doc[FPSTR(HA_NAME)] = F("Emergency target temp");
-    doc[FPSTR(HA_ICON)] = F("mdi:thermometer-alert");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.emergency.target|float(0)|round(1) }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"emergency\": {\"target\" : {{ value }}}}");
-    doc[FPSTR(HA_STEP)] = 0.5;
-    doc[FPSTR(HA_MODE)] = "box";
-    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
-    doc.shrinkToFit();
-
-    return this->publish(this->getTopic(FPSTR(HA_ENTITY_NUMBER), F("emergency_target")).c_str(), doc);
-  }
-
-  bool publishSwitchEmergencyUseEquitherm(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_VALUE_TEMPLATE)] = F("{{ iif(value_json.sensors.outdoor.type != 1, 'online', 'offline') }}");
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getObjectId(F("emergency_use_equitherm"));
-    doc[FPSTR(HA_OBJECT_ID)] = this->getObjectId(F("emergency_use_equitherm"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = F("config");
-    doc[FPSTR(HA_NAME)] = F("Use equitherm in emergency");
-    doc[FPSTR(HA_ICON)] = F("mdi:snowflake-alert");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_STATE_ON)] = true;
-    doc[FPSTR(HA_STATE_OFF)] = false;
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.emergency.useEquitherm }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
-    doc[FPSTR(HA_PAYLOAD_ON)] = F("{\"emergency\": {\"useEquitherm\" : true}}");
-    doc[FPSTR(HA_PAYLOAD_OFF)] = F("{\"emergency\": {\"useEquitherm\" : false}}");
-    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
-    doc.shrinkToFit();
-
-    return this->publish(this->getTopic(FPSTR(HA_ENTITY_SWITCH), F("emergency_use_equitherm")).c_str(), doc);
-  }
-
-  bool publishSwitchEmergencyUsePid(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_VALUE_TEMPLATE)] = F("{{ iif(value_json.sensors.indoor.type != 1, 'online', 'offline') }}");
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getObjectId(F("emergency_use_pid"));
-    doc[FPSTR(HA_OBJECT_ID)] = this->getObjectId(F("emergency_use_pid"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = F("config");
-    doc[FPSTR(HA_NAME)] = F("Use PID in emergency");
-    doc[FPSTR(HA_ICON)] = F("mdi:snowflake-alert");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_STATE_ON)] = true;
-    doc[FPSTR(HA_STATE_OFF)] = false;
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.emergency.usePid }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
-    doc[FPSTR(HA_PAYLOAD_ON)] = F("{\"emergency\": {\"usePid\" : true}}");
-    doc[FPSTR(HA_PAYLOAD_OFF)] = F("{\"emergency\": {\"usePid\" : false}}");
-    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
-    doc.shrinkToFit();
-
-    return this->publish(this->getTopic(FPSTR(HA_ENTITY_SWITCH), F("emergency_use_pid")).c_str(), doc);
-  }
-
-
   bool publishSwitchHeating(bool enabledByDefault = true) {
     JsonDocument doc;
     doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->getDeviceTopic(F("status"));
@@ -175,7 +74,7 @@ public:
     doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"heating\": {\"target\" : {{ value }}}}");
     doc[FPSTR(HA_MIN)] = minTemp;
     doc[FPSTR(HA_MAX)] = maxTemp;
-    doc[FPSTR(HA_STEP)] = 0.5;
+    doc[FPSTR(HA_STEP)] = 0.5f;
     doc[FPSTR(HA_MODE)] = "box";
     doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
     doc.shrinkToFit();
@@ -206,7 +105,7 @@ public:
     doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"heating\": {\"hysteresis\" : {{ value }}}}");
     doc[FPSTR(HA_MIN)] = 0;
     doc[FPSTR(HA_MAX)] = 5;
-    doc[FPSTR(HA_STEP)] = 0.1;
+    doc[FPSTR(HA_STEP)] = 0.1f;
     doc[FPSTR(HA_MODE)] = "box";
     doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
     doc.shrinkToFit();
@@ -234,7 +133,7 @@ public:
     doc[FPSTR(HA_NAME)] = F("Heating setpoint");
     doc[FPSTR(HA_ICON)] = F("mdi:coolant-temperature");
     doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("state"));
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.parameters.heatingSetpoint|int(0) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.parameters.heatingSetpoint|float(0)|round(1) }}");
     doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
     doc.shrinkToFit();
 
@@ -433,7 +332,7 @@ public:
     doc[FPSTR(HA_NAME)] = F("DHW target");
     doc[FPSTR(HA_ICON)] = F("mdi:water-pump");
     doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.dhw.target|int(0) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.dhw.target|float(0)|round(1) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
     doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"dhw\": {\"target\" : {{ value|int(0) }}}}");
     doc[FPSTR(HA_MIN)] = minTemp;
@@ -605,9 +504,9 @@ public:
     doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.pid.p_factor|float(0)|round(3) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
     doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"pid\": {\"p_factor\" : {{ value }}}}");
-    doc[FPSTR(HA_MIN)] = 0.1;
+    doc[FPSTR(HA_MIN)] = 0.1f;
     doc[FPSTR(HA_MAX)] = 1000;
-    doc[FPSTR(HA_STEP)] = 0.1;
+    doc[FPSTR(HA_STEP)] = 0.1f;
     doc[FPSTR(HA_MODE)] = "box";
     doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
     doc.shrinkToFit();
@@ -623,12 +522,12 @@ public:
     doc[FPSTR(HA_NAME)] = F("PID factor I");
     doc[FPSTR(HA_ICON)] = F("mdi:alpha-i-circle-outline");
     doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.pid.i_factor|float(0)|round(3) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.pid.i_factor|float(0)|round(4) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
     doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"pid\": {\"i_factor\" : {{ value }}}}");
     doc[FPSTR(HA_MIN)] = 0;
     doc[FPSTR(HA_MAX)] = 100;
-    doc[FPSTR(HA_STEP)] = 0.001;
+    doc[FPSTR(HA_STEP)] = 0.001f;
     doc[FPSTR(HA_MODE)] = "box";
     doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
     doc.shrinkToFit();
@@ -779,9 +678,9 @@ public:
     doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.n_factor|float(0)|round(3) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
     doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"n_factor\" : {{ value }}}}");
-    doc[FPSTR(HA_MIN)] = 0.001;
+    doc[FPSTR(HA_MIN)] = 0.001f;
     doc[FPSTR(HA_MAX)] = 10;
-    doc[FPSTR(HA_STEP)] = 0.001;
+    doc[FPSTR(HA_STEP)] = 0.001f;
     doc[FPSTR(HA_MODE)] = "box";
     doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
     doc.shrinkToFit();
@@ -802,7 +701,7 @@ public:
     doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"k_factor\" : {{ value }}}}");
     doc[FPSTR(HA_MIN)] = 0;
     doc[FPSTR(HA_MAX)] = 10;
-    doc[FPSTR(HA_STEP)] = 0.01;
+    doc[FPSTR(HA_STEP)] = 0.01f;
     doc[FPSTR(HA_MODE)] = "box";
     doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
     doc.shrinkToFit();
@@ -825,7 +724,7 @@ public:
     doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"t_factor\" : {{ value }}}}");
     doc[FPSTR(HA_MIN)] = 0;
     doc[FPSTR(HA_MAX)] = 10;
-    doc[FPSTR(HA_STEP)] = 0.01;
+    doc[FPSTR(HA_STEP)] = 0.01f;
     doc[FPSTR(HA_MODE)] = "box";
     doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
     doc.shrinkToFit();
@@ -834,48 +733,6 @@ public:
   }
 
 
-  bool publishSwitchTuning(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getObjectId(F("tuning"));
-    doc[FPSTR(HA_OBJECT_ID)] = this->getObjectId(F("tuning"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = F("config");
-    doc[FPSTR(HA_NAME)] = F("Tuning");
-    doc[FPSTR(HA_ICON)] = F("mdi:tune-vertical");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("state"));
-    doc[FPSTR(HA_STATE_ON)] = true;
-    doc[FPSTR(HA_STATE_OFF)] = false;
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.tuning.enable }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("state/set"));
-    doc[FPSTR(HA_PAYLOAD_ON)] = F("{\"tuning\": {\"enable\" : true}}");
-    doc[FPSTR(HA_PAYLOAD_OFF)] = F("{\"tuning\": {\"enable\" : false}}");
-    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
-    doc.shrinkToFit();
-
-    return this->publish(this->getTopic(FPSTR(HA_ENTITY_SWITCH), F("tuning")).c_str(), doc);
-  }
-
-  bool publishSelectTuningRegulator(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->getDeviceTopic(F("status"));
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("state/set"));
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"tuning\": {\"regulator\": {% if value == 'Equitherm' %}0{% elif value == 'PID' %}1{% endif %}}}");
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getObjectId(F("tuning_regulator"));
-    doc[FPSTR(HA_OBJECT_ID)] = this->getObjectId(F("tuning_regulator"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = F("config");
-    doc[FPSTR(HA_NAME)] = F("Tuning regulator");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("state"));
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{% if value_json.tuning.regulator == 0 %}Equitherm{% elif value_json.tuning.regulator == 1 %}PID{% endif %}");
-    doc[FPSTR(HA_OPTIONS)][0] = F("Equitherm");
-    doc[FPSTR(HA_OPTIONS)][1] = F("PID");
-    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
-    doc.shrinkToFit();
-
-    return this->publish(this->getTopic(FPSTR(HA_ENTITY_SELECT), F("tuning_regulator")).c_str(), doc);
-  }
-
-
   bool publishBinSensorStatus(bool enabledByDefault = true) {
     JsonDocument doc;
     doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
@@ -1184,7 +1041,7 @@ public:
     doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.temperatures.indoor|float(0)|round(1) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("state/set"));
     doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"temperatures\": {\"indoor\":{{ value }}}}");
-    doc[FPSTR(HA_STEP)] = 0.01;
+    doc[FPSTR(HA_STEP)] = 0.01f;
     doc[FPSTR(HA_MODE)] = "box";
     doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
     doc.shrinkToFit();
@@ -1243,7 +1100,7 @@ public:
     doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.temperatures.outdoor|float(0)|round(1) }}");
     doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("state/set"));
     doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"temperatures\": {\"outdoor\":{{ value }}}}");
-    doc[FPSTR(HA_STEP)] = 0.01;
+    doc[FPSTR(HA_STEP)] = 0.01f;
     doc[FPSTR(HA_MODE)] = "box";
     doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
     doc.shrinkToFit();
@@ -1452,7 +1309,7 @@ public:
 
     doc[FPSTR(HA_MIN_TEMP)] = minTemp;
     doc[FPSTR(HA_MAX_TEMP)] = maxTemp;
-    doc[FPSTR(HA_TEMP_STEP)] = 0.5;
+    doc[FPSTR(HA_TEMP_STEP)] = 0.5f;
     doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
     doc.shrinkToFit();
 
@@ -1475,7 +1332,7 @@ public:
     doc[FPSTR(HA_TEMPERATURE_COMMAND_TEMPLATE)] = F("{\"dhw\": {\"target\" : {{ value|int(0) }}}}");
 
     doc[FPSTR(HA_TEMPERATURE_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_TEMPERATURE_STATE_TEMPLATE)] = F("{{ value_json.dhw.target|int(0) }}");
+    doc[FPSTR(HA_TEMPERATURE_STATE_TEMPLATE)] = F("{{ value_json.dhw.target|float(0)|round(1) }}");
 
     if (unit == UnitSystem::METRIC) {
       doc[FPSTR(HA_TEMPERATURE_UNIT)] = "C";

src/MainTask.h

@@ -1,6 +1,8 @@
 #include <Blinker.h>
 
-extern Network::Manager* network;
+using namespace NetworkUtils;
+
+extern NetworkMgr* network;
 extern MqttTask* tMqtt;
 extern OpenThermTask* tOt;
 extern FileData fsSettings, fsNetworkSettings;
@@ -38,17 +40,19 @@ protected:
   unsigned long externalPumpStartTime = 0;
   bool telnetStarted = false;
 
-  const char* getTaskName() {
+  #if defined(ARDUINO_ARCH_ESP32)
+  const char* getTaskName() override {
     return "Main";
   }
 
-  /*int getTaskCore() {
+  /*BaseType_t getTaskCore() override {
     return 1;
   }*/
 
-  int getTaskPriority() {
+  int getTaskPriority() override {
     return 3;
   }
+  #endif
 
   void setup() {}
 

src/MqttTask.h

@@ -53,16 +53,25 @@ public:
     Log.sinfoln(FPSTR(L_MQTT), F("Enabled"));
   }
 
-  bool isConnected() {
+  inline bool isConnected() {
     return this->connected;
   }
 
+  inline void resetPublishedSettingsTime() {
+    this->prevPubSettingsTime = 0;
+  }
+
+  inline void resetPublishedVarsTime() {
+    this->prevPubVarsTime = 0;
+  }
+
 protected:
   MqttWiFiClient* wifiClient = nullptr;
   MqttClient* client = nullptr;
   HaHelper* haHelper = nullptr;
   MqttWriter* writer = nullptr;
   UnitSystem currentUnitSystem = UnitSystem::METRIC;
+  bool currentHomeAssistantDiscovery = false;
   unsigned short readyForSendTime = 15000;
   unsigned long lastReconnectTime = 0;
   unsigned long connectedTime = 0;
@@ -72,19 +81,21 @@ protected:
   bool connected = false;
   bool newConnection = false;
 
-  const char* getTaskName() {
+  #if defined(ARDUINO_ARCH_ESP32)
+  const char* getTaskName() override {
     return "Mqtt";
   }
   
-  /*int getTaskCore() {
+  /*BaseType_t getTaskCore() override {
     return 1;
   }*/
 
-  int getTaskPriority() {
+  int getTaskPriority() override {
     return 2;
   }
+  #endif
 
-  bool isReadyForSend() {
+  inline bool isReadyForSend() {
     return millis() - this->connectedTime > this->readyForSendTime;
   }
 
@@ -152,7 +163,7 @@ protected:
 
     // ha helper settings
     this->haHelper->setDevicePrefix(settings.mqtt.prefix);
-    this->haHelper->setDeviceVersion(PROJECT_VERSION);
+    this->haHelper->setDeviceVersion(BUILD_VERSION);
     this->haHelper->setDeviceModel(PROJECT_NAME);
     this->haHelper->setDeviceName(PROJECT_NAME);
     this->haHelper->setWriter(this->writer);
@@ -227,16 +238,25 @@ protected:
     }
 
     // publish ha entities if not published
-    if (this->newConnection || this->currentUnitSystem != settings.system.unitSystem) {
+    if (settings.mqtt.homeAssistantDiscovery) {
+      if (this->newConnection || !this->currentHomeAssistantDiscovery || this->currentUnitSystem != settings.system.unitSystem) {
         this->publishHaEntities();
         this->publishNonStaticHaEntities(true);
-      this->newConnection = false;
+        this->currentHomeAssistantDiscovery = true;
         this->currentUnitSystem = settings.system.unitSystem;
 
       } else {
         // publish non static ha entities
         this->publishNonStaticHaEntities();
       }
+
+    } else if (this->currentHomeAssistantDiscovery) {
+      this->currentHomeAssistantDiscovery = false;
+    }
+
+    if (this->newConnection) {
+      this->newConnection = false;
+    }
   }
 
   void onConnect() {
@@ -291,52 +311,26 @@ protected:
       Log.swarningln(FPSTR(L_MQTT_MSG), F("Not valid json"));
       return;
     }
+    doc.shrinkToFit();
 
     if (this->haHelper->getDeviceTopic("state/set").equals(topic)) {
       this->writer->publish(this->haHelper->getDeviceTopic("state/set").c_str(), nullptr, 0, true);
-      this->updateVariables(doc);
+      
+      if (jsonToVars(doc, vars)) {
+        this->resetPublishedVarsTime();
+      }
 
     } else if (this->haHelper->getDeviceTopic("settings/set").equals(topic)) {
       this->writer->publish(this->haHelper->getDeviceTopic("settings/set").c_str(), nullptr, 0, true);
-      this->updateSettings(doc);
-    }
-  }
       
-
+      if (safeJsonToSettings(doc, settings)) {
-  bool updateSettings(JsonDocument& doc) {
+        this->resetPublishedSettingsTime();
-    bool changed = safeJsonToSettings(doc, settings);
-    doc.clear();
-    doc.shrinkToFit();
-
-    if (changed) {
-      this->prevPubSettingsTime = 0;
         fsSettings.update();
-      return true;
       }
-
-    return false;
     }
-
-  bool updateVariables(JsonDocument& doc) {
-    bool changed = jsonToVars(doc, vars);
-    doc.clear();
-    doc.shrinkToFit();
-
-    if (changed) {
-      this->prevPubVarsTime = 0;
-      return true;
-    }
-
-    return false;
   }
 
   void publishHaEntities() {
-    // emergency
-    this->haHelper->publishSwitchEmergency();
-    this->haHelper->publishNumberEmergencyTarget(settings.system.unitSystem);
-    this->haHelper->publishSwitchEmergencyUseEquitherm();
-    this->haHelper->publishSwitchEmergencyUsePid();
-
     // heating
     this->haHelper->publishSwitchHeating(false);
     this->haHelper->publishSwitchHeatingTurbo();
@@ -363,10 +357,6 @@ protected:
     this->haHelper->publishNumberEquithermFactorK();
     this->haHelper->publishNumberEquithermFactorT();
 
-    // tuning
-    this->haHelper->publishSwitchTuning();
-    this->haHelper->publishSelectTuningRegulator();
-
     // states
     this->haHelper->publishBinSensorStatus();
     this->haHelper->publishBinSensorOtStatus();
@@ -396,26 +386,22 @@ protected:
 
   bool publishNonStaticHaEntities(bool force = false) {
     static byte _heatingMinTemp, _heatingMaxTemp, _dhwMinTemp, _dhwMaxTemp = 0;
-    static bool _isStupidMode, _editableOutdoorTemp, _editableIndoorTemp, _dhwPresent = false;
+    static bool _noRegulators, _editableOutdoorTemp, _editableIndoorTemp, _dhwPresent = false;
 
     bool published = false;
-    bool isStupidMode = !settings.pid.enable && !settings.equitherm.enable;
+    bool noRegulators = !settings.opentherm.nativeHeatingControl && !settings.pid.enable && !settings.equitherm.enable;
     byte heatingMinTemp = 0;
     byte heatingMaxTemp = 0;
     bool editableOutdoorTemp = settings.sensors.outdoor.type == SensorType::MANUAL;
     bool editableIndoorTemp = settings.sensors.indoor.type == SensorType::MANUAL;
 
-    if (isStupidMode) {
+    if (noRegulators) {
       heatingMinTemp = settings.heating.minTemp;
       heatingMaxTemp = settings.heating.maxTemp;
 
-    } else if (settings.system.unitSystem == UnitSystem::METRIC) {
+    } else {
-      heatingMinTemp = 5;
+      heatingMinTemp = convertTemp(THERMOSTAT_INDOOR_MIN_TEMP, UnitSystem::METRIC, settings.system.unitSystem);
-      heatingMaxTemp = 30;
+      heatingMaxTemp = convertTemp(THERMOSTAT_INDOOR_MAX_TEMP, UnitSystem::METRIC, settings.system.unitSystem);
-
-    } else if (settings.system.unitSystem == UnitSystem::IMPERIAL) {
-      heatingMinTemp = 41;
-      heatingMaxTemp = 86;
     }
 
     if (force || _dhwPresent != settings.opentherm.dhwPresent) {
@@ -447,32 +433,17 @@ protected:
       published = true;
     }
 
-    if (force || _heatingMinTemp != heatingMinTemp || _heatingMaxTemp != heatingMaxTemp) {
+    if (force || _noRegulators != noRegulators || _heatingMinTemp != heatingMinTemp || _heatingMaxTemp != heatingMaxTemp) {
-      if (settings.heating.target < heatingMinTemp || settings.heating.target > heatingMaxTemp) {
-        settings.heating.target = constrain(settings.heating.target, heatingMinTemp, heatingMaxTemp);
-      }
-
       _heatingMinTemp = heatingMinTemp;
       _heatingMaxTemp = heatingMaxTemp;
-      _isStupidMode = isStupidMode;
+      _noRegulators = noRegulators;
 
       this->haHelper->publishNumberHeatingTarget(settings.system.unitSystem, heatingMinTemp, heatingMaxTemp, false);
       this->haHelper->publishClimateHeating(
         settings.system.unitSystem,
         heatingMinTemp,
         heatingMaxTemp,
-        isStupidMode ? HaHelper::TEMP_SOURCE_HEATING : HaHelper::TEMP_SOURCE_INDOOR
+        noRegulators ? HaHelper::TEMP_SOURCE_HEATING : HaHelper::TEMP_SOURCE_INDOOR
-      );
-
-      published = true;
-
-    } else if (_isStupidMode != isStupidMode) {
-      _isStupidMode = isStupidMode;
-      this->haHelper->publishClimateHeating(
-        settings.system.unitSystem,
-        heatingMinTemp,
-        heatingMaxTemp,
-        isStupidMode ? HaHelper::TEMP_SOURCE_HEATING : HaHelper::TEMP_SOURCE_INDOOR
       );
 
       published = true;

src/OpenThermTask.h

@@ -30,19 +30,22 @@ protected:
   unsigned long dhwSetTempTime = 0;
   unsigned long heatingSetTempTime = 0;
   byte configuredRxLedGpio = GPIO_IS_NOT_CONFIGURED;
+  byte configuredFaultStateGpio = GPIO_IS_NOT_CONFIGURED;
+  bool faultState = false;
 
-
+  #if defined(ARDUINO_ARCH_ESP32)
-  const char* getTaskName() {
+  const char* getTaskName() override {
     return "OpenTherm";
   }
   
-  int getTaskCore() {
+  BaseType_t getTaskCore() override {
     return 1;
   }
 
-  int getTaskPriority() {
+  int getTaskPriority() override {
     return 5;
   }
+  #endif
 
   void setup() {
     if (settings.system.unitSystem != UnitSystem::METRIC) {
@@ -101,7 +104,8 @@ protected:
   }
 
   void loop() {
-    static byte currentHeatingTemp, currentDhwTemp = 0;
+    static float currentHeatingTemp = 0.0f;
+    static float currentDhwTemp = 0.0f;
 
     if (this->instanceInGpio != settings.opentherm.inGpio || this->instanceOutGpio != settings.opentherm.outGpio) {
       this->setup();
@@ -115,6 +119,7 @@ protected:
       return;
     }
 
+    // RX LED GPIO setup
     if (settings.opentherm.rxLedGpio != this->configuredRxLedGpio) {
       if (this->configuredRxLedGpio != GPIO_IS_NOT_CONFIGURED) {
         digitalWrite(this->configuredRxLedGpio, LOW);
@@ -130,6 +135,27 @@ protected:
       }
     }
 
+    // Fault state setup
+    if (settings.opentherm.faultStateGpio != this->configuredFaultStateGpio) {
+      if (this->configuredFaultStateGpio != GPIO_IS_NOT_CONFIGURED) {
+        digitalWrite(this->configuredFaultStateGpio, LOW);
+      }
+      
+      if (GPIO_IS_VALID(settings.opentherm.faultStateGpio)) {
+        this->configuredFaultStateGpio = settings.opentherm.faultStateGpio;
+        this->faultState = false ^ settings.opentherm.invertFaultState ? HIGH : LOW;
+
+        pinMode(this->configuredFaultStateGpio, OUTPUT);
+        digitalWrite(
+          this->configuredFaultStateGpio,
+          this->faultState
+        );
+
+      } else if (this->configuredFaultStateGpio != GPIO_IS_NOT_CONFIGURED) {
+        this->configuredFaultStateGpio = GPIO_IS_NOT_CONFIGURED;
+      }
+    }
+
     bool heatingEnabled = (vars.states.emergency || settings.heating.enable) && this->pump && this->isReady();
     bool heatingCh2Enabled = settings.opentherm.heatingCh2Enabled;
     if (settings.opentherm.heatingCh1ToCh2) {
@@ -143,7 +169,7 @@ protected:
       heatingEnabled,
       settings.opentherm.dhwPresent && settings.dhw.enable,
       false,
-      false,
+      settings.opentherm.nativeHeatingControl,
       heatingCh2Enabled,
       settings.opentherm.summerWinterMode,
       settings.opentherm.dhwBlocking
@@ -173,6 +199,16 @@ protected:
       vars.states.fault = false;
       vars.states.diagnostic = false;
 
+      // Force fault state = on
+      if (this->configuredFaultStateGpio != GPIO_IS_NOT_CONFIGURED) {
+        bool fState = true ^ settings.opentherm.invertFaultState ? HIGH : LOW;
+
+        if (fState != this->faultState) {
+          this->faultState = fState;
+          digitalWrite(this->configuredFaultStateGpio, this->faultState);
+        }
+      }
+
       return;
     }
 
@@ -198,6 +234,16 @@ protected:
     vars.states.fault = CustomOpenTherm::isFault(response);
     vars.states.diagnostic = CustomOpenTherm::isDiagnostic(response);
 
+    // Fault state
+    if (this->configuredFaultStateGpio != GPIO_IS_NOT_CONFIGURED) {
+      bool fState = vars.states.fault ^ settings.opentherm.invertFaultState ? HIGH : LOW;
+      
+      if (fState != this->faultState) {
+        this->faultState = fState;
+        digitalWrite(this->configuredFaultStateGpio, this->faultState);
+      }
+    }
+
     // These parameters will be updated every minute
     if (millis() - this->prevUpdateNonEssentialVars > 60000) {
       if (!heatingEnabled && settings.opentherm.modulationSyncWithHeating) {
@@ -285,6 +331,9 @@ protected:
       // Get fault code (if necessary)
       if (vars.states.fault) {
         updateFaultCode();
+        
+      } else if (vars.sensors.faultCode != 0) {
+        vars.sensors.faultCode = 0;
       }
 
       updatePressure();
@@ -351,18 +400,13 @@ protected:
 
 
     // Update DHW temp
-    byte newDhwTemp = settings.dhw.target;
+    if (settings.opentherm.dhwPresent && settings.dhw.enable && (this->needSetDhwTemp() || fabs(settings.dhw.target - currentDhwTemp) > 0.0001f)) {
-    if (settings.opentherm.dhwPresent && settings.dhw.enable && (this->needSetDhwTemp() || newDhwTemp != currentDhwTemp)) {
+      float convertedTemp = convertTemp(settings.dhw.target, settings.system.unitSystem, settings.opentherm.unitSystem);
-      if (newDhwTemp < settings.dhw.minTemp || newDhwTemp > settings.dhw.maxTemp) {
+      Log.sinfoln(FPSTR(L_OT_DHW), F("Set temp: %.2f (converted: %.2f)"), settings.dhw.target, convertedTemp);
-        newDhwTemp = constrain(newDhwTemp, settings.dhw.minTemp, settings.dhw.maxTemp);
-      }
-
-      float convertedTemp = convertTemp(newDhwTemp, settings.system.unitSystem, settings.opentherm.unitSystem);
-      Log.sinfoln(FPSTR(L_OT_DHW), F("Set temp: %u (converted: %.2f)"), newDhwTemp, convertedTemp);
 
       // Set DHW temp
       if (this->instance->setDhwTemp(convertedTemp)) {
-        currentDhwTemp = newDhwTemp;
+        currentDhwTemp = settings.dhw.target;
         this->dhwSetTempTime = millis();
 
       } else {
@@ -372,30 +416,82 @@ protected:
       // Set DHW temp to CH2
       if (settings.opentherm.dhwToCh2) {
         if (!this->instance->setHeatingCh2Temp(convertedTemp)) {
-          Log.swarningln(FPSTR(L_OT_DHW), F("Failed set ch2 temp"));
+          Log.swarningln(FPSTR(L_OT_DHW), F("Failed set CH2 temp"));
         }
       }
     }
 
 
-    // Update heating temp
+    // Native heating control
-    if (heatingEnabled && (this->needSetHeatingTemp() || fabs(vars.parameters.heatingSetpoint - currentHeatingTemp) > 0.0001)) {
+    if (settings.opentherm.nativeHeatingControl) {
-      float convertedTemp = convertTemp(vars.parameters.heatingSetpoint, settings.system.unitSystem, settings.opentherm.unitSystem);
+      // Set current indoor temp
-      Log.sinfoln(FPSTR(L_OT_HEATING), F("Set temp: %u (converted: %.2f)"), vars.parameters.heatingSetpoint, convertedTemp);
+      float indoorTemp = 0.0f;
+      float convertedTemp = 0.0f;
 
-      // Set heating temp
+      if (!vars.states.emergency || settings.sensors.indoor.type != SensorType::MANUAL) {
-      if (this->instance->setHeatingCh1Temp(convertedTemp) || this->setMaxHeatingTemp(convertedTemp)) {
+        indoorTemp = vars.temperatures.indoor;
+        convertedTemp = convertTemp(indoorTemp, settings.system.unitSystem, settings.opentherm.unitSystem);
+      }
+
+      Log.sinfoln(FPSTR(L_OT_HEATING), F("Set current indoor temp: %.2f (converted: %.2f)"), indoorTemp, convertedTemp);
+      if (!this->instance->setRoomTemp(convertedTemp)) {
+        Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set current indoor temp"));
+      }
+
+      // Set target indoor temp
+      if (this->needSetHeatingTemp() || fabs(vars.parameters.heatingSetpoint - currentHeatingTemp) > 0.0001f) {
+        convertedTemp = convertTemp(vars.parameters.heatingSetpoint, settings.system.unitSystem, settings.opentherm.unitSystem);
+        Log.sinfoln(FPSTR(L_OT_HEATING), F("Set target indoor temp: %.2f (converted: %.2f)"), vars.parameters.heatingSetpoint, convertedTemp);
+
+        if (this->instance->setRoomSetpoint(convertedTemp)) {
           currentHeatingTemp = vars.parameters.heatingSetpoint;
           this->heatingSetTempTime = millis();
 
         } else {
-        Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set temp"));
+          Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set target indoor temp"));
+        }
+
+        // Set target temp to CH2
+        if (settings.opentherm.heatingCh1ToCh2) {
+          if (!this->instance->setRoomSetpointCh2(convertedTemp)) {
+            Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set target indoor temp to CH2"));
+          }
+        }
+      }
+
+      // force enable pump
+      if (!this->pump) {
+        this->pump = true;
+      }
+
+    } else {
+      // Update heating temp
+      if (heatingEnabled && (this->needSetHeatingTemp() || fabs(vars.parameters.heatingSetpoint - currentHeatingTemp) > 0.0001f)) {
+        float convertedTemp = convertTemp(vars.parameters.heatingSetpoint, settings.system.unitSystem, settings.opentherm.unitSystem);
+        Log.sinfoln(FPSTR(L_OT_HEATING), F("Set temp: %.2f (converted: %.2f)"), vars.parameters.heatingSetpoint, convertedTemp);
+
+        // Set max heating temp
+        if (this->setMaxHeatingTemp(convertedTemp)) {
+          currentHeatingTemp = vars.parameters.heatingSetpoint;
+          this->heatingSetTempTime = millis();
+
+        } else {
+          Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set max heating temp"));
+        }
+
+        // Set heating temp
+        if (this->instance->setHeatingCh1Temp(convertedTemp)) {
+          currentHeatingTemp = vars.parameters.heatingSetpoint;
+          this->heatingSetTempTime = millis();
+
+        } else {
+          Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set CH1 temp"));
         }
 
         // Set heating temp to CH2
         if (settings.opentherm.heatingCh1ToCh2) {
           if (!this->instance->setHeatingCh2Temp(convertedTemp)) {
-          Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set ch2 temp"));
+            Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set CH2 temp"));
           }
         }
       }
@@ -405,10 +501,10 @@ protected:
       // Only if enabled PID or/and Equitherm
       if (settings.heating.hysteresis > 0 && (!vars.states.emergency || settings.emergency.usePid) && (settings.equitherm.enable || settings.pid.enable)) {
         float halfHyst = settings.heating.hysteresis / 2;
-      if (this->pump && vars.temperatures.indoor - settings.heating.target + 0.0001 >= halfHyst) {
+        if (this->pump && vars.temperatures.indoor - settings.heating.target + 0.0001f >= halfHyst) {
           this->pump = false;
 
-      } else if (!this->pump && vars.temperatures.indoor - settings.heating.target - 0.0001 <= -(halfHyst)) {
+        } else if (!this->pump && vars.temperatures.indoor - settings.heating.target - 0.0001f <= -(halfHyst)) {
           this->pump = true;
         }
 
@@ -416,6 +512,7 @@ protected:
         this->pump = true;
       }
     }
+  }
 
   void initialize() {
     // Not all boilers support these, only try once when the boiler becomes connected

src/PortalTask.h

@@ -14,7 +14,9 @@ using WebServer = ESP8266WebServer;
 #include <UpgradeHandler.h>
 #include <DNSServer.h>
 
-extern Network::Manager* network;
+using namespace NetworkUtils;
+
+extern NetworkMgr* network;
 extern FileData fsSettings, fsNetworkSettings;
 extern MqttTask* tMqtt;
 
@@ -53,17 +55,19 @@ protected:
   unsigned long webServerChangeState = 0;
   unsigned long dnsServerChangeState = 0;
 
-  const char* getTaskName() {
+  #if defined(ARDUINO_ARCH_ESP32)
+  const char* getTaskName() override {
     return "Portal";
   }
 
-  /*int getTaskCore() {
+  /*BaseType_t getTaskCore() override {
     return 1;
   }*/
 
-  int getTaskPriority() {
+  int getTaskPriority() override {
     return 1;
   }
+  #endif
 
   void setup() {
     this->dnsServer->setTTL(0);
@@ -78,7 +82,7 @@ protected:
         String result;
 
         if (strcmp(var, "ver") == 0) {
-          result = PROJECT_VERSION;
+          result = BUILD_VERSION;
         }
 
         return result;
@@ -344,7 +348,11 @@ protected:
       auto apCount = WiFi.scanComplete();
       if (apCount <= 0) {
         if (apCount != WIFI_SCAN_RUNNING) {
+          #ifdef ARDUINO_ARCH_ESP8266
           WiFi.scanNetworks(true, true);
+          #else
+          WiFi.scanNetworks(true, true, true);
+          #endif
         }
         
         this->webServer->send(404);
@@ -355,10 +363,16 @@ protected:
       for (short int i = 0; i < apCount; i++) {
         String ssid = WiFi.SSID(i);
         doc[i]["ssid"] = ssid;
-        doc[i]["signalQuality"] = Network::Manager::rssiToSignalQuality(WiFi.RSSI(i));
+        doc[i]["bssid"] = WiFi.BSSIDstr(i);
+        doc[i]["signalQuality"] = NetworkMgr::rssiToSignalQuality(WiFi.RSSI(i));
         doc[i]["channel"] = WiFi.channel(i);
         doc[i]["hidden"] = !ssid.length();
-        doc[i]["encryptionType"] = WiFi.encryptionType(i);
+        #ifdef ARDUINO_ARCH_ESP8266
+        const bss_info* info = WiFi.getScanInfoByIndex(i);
+        doc[i]["auth"] = info->authmode;
+        #else
+        doc[i]["auth"] = WiFi.encryptionType(i);
+        #endif
       }
       doc.shrinkToFit();
 
@@ -423,7 +437,9 @@ protected:
       if (changed) {
         doc.clear();
         doc.shrinkToFit();
+
         fsSettings.update();
+        tMqtt->resetPublishedSettingsTime();
       }
     });
 
@@ -473,6 +489,13 @@ protected:
       doc.shrinkToFit();
       
       this->bufferedWebServer->send(changed ? 201 : 200, "application/json", doc);
+
+      if (changed) {
+        doc.clear();
+        doc.shrinkToFit();
+        
+        tMqtt->resetPublishedVarsTime();
+      }
     });
 
     this->webServer->on("/api/info", HTTP_GET, [this]() {
@@ -483,15 +506,16 @@ protected:
       doc["network"]["mac"] = network->getStaMac();
       doc["network"]["connected"] = isConnected;
       doc["network"]["ssid"] = network->getStaSsid();
-      doc["network"]["signalQuality"] = isConnected ? Network::Manager::rssiToSignalQuality(network->getRssi()) : 0;
+      doc["network"]["signalQuality"] = isConnected ? NetworkMgr::rssiToSignalQuality(network->getRssi()) : 0;
       doc["network"]["channel"] = isConnected ? network->getStaChannel() : 0;
       doc["network"]["ip"] = isConnected ? network->getStaIp().toString() : "";
       doc["network"]["subnet"] = isConnected ? network->getStaSubnet().toString() : "";
       doc["network"]["gateway"] = isConnected ? network->getStaGateway().toString() : "";
       doc["network"]["dns"] = isConnected ? network->getStaDns().toString() : "";
 
-      doc["system"]["version"] = PROJECT_VERSION;
+      doc["system"]["buildVersion"] = BUILD_VERSION;
       doc["system"]["buildDate"] = __DATE__ " " __TIME__;
+      doc["system"]["buildEnv"] = BUILD_ENV;
       doc["system"]["uptime"] = millis() / 1000ul;
       doc["system"]["totalHeap"] = getTotalHeap();
       doc["system"]["freeHeap"] = getFreeHeap();
@@ -499,6 +523,34 @@ protected:
       doc["system"]["maxFreeBlockHeap"] = getMaxFreeBlockHeap();
       doc["system"]["minMaxFreeBlockHeap"] = getMaxFreeBlockHeap(true);
       doc["system"]["resetReason"] = getResetReason();
+      
+      #ifdef ARDUINO_ARCH_ESP8266
+      doc["system"]["chipModel"] = esp_is_8285() ? "ESP8285" : "ESP8266";
+      doc["system"]["chipRevision"] = 0;
+      doc["system"]["chipCores"] = 1;
+      doc["system"]["cpuFreq"] = ESP.getCpuFreqMHz();
+      doc["system"]["coreVersion"] = ESP.getCoreVersion();
+      doc["system"]["flashSize"] = ESP.getFlashChipSize();
+      doc["system"]["flashRealSize"] = ESP.getFlashChipRealSize();
+      #elif ARDUINO_ARCH_ESP32
+      doc["system"]["chipModel"] = ESP.getChipModel();
+      doc["system"]["chipRevision"] = ESP.getChipRevision();
+      doc["system"]["chipCores"] = ESP.getChipCores();
+      doc["system"]["cpuFreq"] = ESP.getCpuFreqMHz();
+      doc["system"]["coreVersion"] = ESP.getSdkVersion();
+      doc["system"]["flashSize"] = ESP.getFlashChipSize();
+      doc["system"]["flashRealSize"] = doc["system"]["flashSize"];
+      #else
+      doc["system"]["chipModel"] = 0;
+      doc["system"]["chipRevision"] = 0;
+      doc["system"]["chipCores"] = 0;
+      doc["system"]["cpuFreq"] = 0;
+      doc["system"]["coreVersion"] = 0;
+      doc["system"]["flashSize"] = 0;
+      doc["system"]["flashRealSize"] = 0;
+      #endif
+
+
       doc.shrinkToFit();
 
       this->bufferedWebServer->send(200, "application/json", doc);
@@ -572,6 +624,10 @@ protected:
     if (this->stateWebServer()) {
       this->webServer->handleClient();
     }
+
+    if (!this->stateDnsServer() && !this->stateWebServer()) {
+      this->delay(250);
+    }
   }
 
   bool isAuthRequired() {

src/RegulatorTask.h

@@ -1,10 +1,8 @@
 #include <Equitherm.h>
 #include <GyverPID.h>
-#include <PIDtuner.h>
 
 Equitherm etRegulator;
 GyverPID pidRegulator(0, 0, 0);
-PIDtuner pidTuner;
 
 
 class RegulatorTask : public LeanTask {
@@ -12,27 +10,26 @@ public:
   RegulatorTask(bool _enabled = false, unsigned long _interval = 0) : LeanTask(_enabled, _interval) {}
 
 protected:
-  bool tunerInit = false;
-  byte tunerState = 0;
-  byte tunerRegulator = 0;
   float prevHeatingTarget = 0;
   float prevEtResult = 0;
   float prevPidResult = 0;
 
-  const char* getTaskName() {
+  #if defined(ARDUINO_ARCH_ESP32)
+  const char* getTaskName() override {
     return "Regulator";
   }
   
-  /*int getTaskCore() {
+  /*BaseType_t getTaskCore() override {
     return 1;
   }*/
 
-  int getTaskPriority() {
+  int getTaskPriority() override {
     return 4;
   }
+  #endif
   
   void loop() {
-    byte newTemp = vars.parameters.heatingSetpoint;
+    float newTemp = vars.parameters.heatingSetpoint;
 
     if (vars.states.emergency) {
       if (settings.heating.turbo) {
@@ -41,74 +38,60 @@ protected:
         Log.sinfoln(FPSTR(L_REGULATOR), F("Turbo mode auto disabled"));
       }
 
-      newTemp = getEmergencyModeTemp();
+      newTemp = this->getEmergencyModeTemp();
 
     } else {
-      if (vars.tuning.enable || tunerInit) {
-        if (settings.heating.turbo) {
-          settings.heating.turbo = false;
-
-          Log.sinfoln(FPSTR(L_REGULATOR), F("Turbo mode auto disabled"));
-        }
-
-        newTemp = getTuningModeTemp();
-
-        if (newTemp == 0) {
-          vars.tuning.enable = false;
-        }
-      }
-
-      if (!vars.tuning.enable) {
       if (settings.heating.turbo && (fabs(settings.heating.target - vars.temperatures.indoor) < 1 || !settings.heating.enable || (settings.equitherm.enable && settings.pid.enable))) {
         settings.heating.turbo = false;
 
         Log.sinfoln(FPSTR(L_REGULATOR), F("Turbo mode auto disabled"));
       }
 
-        newTemp = getNormalModeTemp();
+      newTemp = this->getNormalModeTemp();
-      }
     }
 
     // Limits
-    if (newTemp < settings.heating.minTemp || newTemp > settings.heating.maxTemp) {
+    newTemp = constrain(
-      newTemp = constrain(newTemp, settings.heating.minTemp, settings.heating.maxTemp);
+      newTemp,
-    }
+      !settings.opentherm.nativeHeatingControl ? settings.heating.minTemp : THERMOSTAT_INDOOR_MIN_TEMP,
+      !settings.opentherm.nativeHeatingControl ? settings.heating.maxTemp : THERMOSTAT_INDOOR_MAX_TEMP
+    );
 
-    if (abs(vars.parameters.heatingSetpoint - newTemp) + 0.0001 >= 1) {
+    if (fabs(vars.parameters.heatingSetpoint - newTemp) > 0.4999f) {
       vars.parameters.heatingSetpoint = newTemp;
     }
   }
 
 
-  byte getEmergencyModeTemp() {
+  float getEmergencyModeTemp() {
     float newTemp = 0;
 
     // if use equitherm
-    if (settings.emergency.useEquitherm && settings.sensors.outdoor.type != SensorType::MANUAL) {
+    if (settings.emergency.useEquitherm) {
       float etResult = getEquithermTemp(settings.heating.minTemp, settings.heating.maxTemp);
 
-      if (fabs(prevEtResult - etResult) + 0.0001 >= 0.5) {
+      if (fabs(prevEtResult - etResult) > 0.4999f) {
         prevEtResult = etResult;
         newTemp += etResult;
 
-        Log.sinfoln(FPSTR(L_REGULATOR_EQUITHERM), F("New emergency result: %hhu (%.2f)"), (uint8_t) round(etResult), etResult);
+        Log.sinfoln(FPSTR(L_REGULATOR_EQUITHERM), F("New emergency result: %.2f"), etResult);
 
       } else {
         newTemp += prevEtResult;
       }
 
-    } else if(settings.emergency.usePid && settings.sensors.indoor.type != SensorType::MANUAL) {
+    } else if(settings.emergency.usePid) {
       if (vars.parameters.heatingEnabled) {
         float pidResult = getPidTemp(
           settings.heating.minTemp,
           settings.heating.maxTemp
         );
 
-        if (fabs(prevPidResult - pidResult) + 0.0001 >= 0.5) {
+        if (fabs(prevPidResult - pidResult) > 0.4999f) {
           prevPidResult = pidResult;
           newTemp += pidResult;
 
-          Log.sinfoln(FPSTR(L_REGULATOR_PID), F("New emergency result: %hhu (%.2f)"), (uint8_t) round(pidResult), pidResult);
+          Log.sinfoln(FPSTR(L_REGULATOR_PID), F("New emergency result: %.2f"), pidResult);
 
         } else {
           newTemp += prevPidResult;
@@ -123,17 +106,17 @@ protected:
       newTemp = settings.emergency.target;
     }
 
-    return round(newTemp);
+    return newTemp;
   }
 
-  byte getNormalModeTemp() {
+  float getNormalModeTemp() {
     float newTemp = 0;
 
-    if (fabs(prevHeatingTarget - settings.heating.target) > 0.0001) {
+    if (fabs(prevHeatingTarget - settings.heating.target) > 0.0001f) {
       prevHeatingTarget = settings.heating.target;
       Log.sinfoln(FPSTR(L_REGULATOR), F("New target: %.2f"), settings.heating.target);
 
-      if (settings.equitherm.enable && settings.pid.enable) {
+      if (/*settings.equitherm.enable && */settings.pid.enable) {
         pidRegulator.integral = 0;
         Log.sinfoln(FPSTR(L_REGULATOR_PID), F("Integral sum has been reset"));
       }
@@ -143,11 +126,11 @@ protected:
     if (settings.equitherm.enable) {
       float etResult = getEquithermTemp(settings.heating.minTemp, settings.heating.maxTemp);
 
-      if (fabs(prevEtResult - etResult) + 0.0001 >= 0.5) {
+      if (fabs(prevEtResult - etResult) > 0.4999f) {
         prevEtResult = etResult;
         newTemp += etResult;
 
-        Log.sinfoln(FPSTR(L_REGULATOR_EQUITHERM), F("New result: %hhu (%.2f)"), (uint8_t) round(etResult), etResult);
+        Log.sinfoln(FPSTR(L_REGULATOR_EQUITHERM), F("New result: %.2f"), etResult);
 
       } else {
         newTemp += prevEtResult;
@@ -162,11 +145,12 @@ protected:
           settings.pid.maxTemp
         );
 
-        if (fabs(prevPidResult - pidResult) + 0.0001 >= 0.5) {
+        if (fabs(prevPidResult - pidResult) > 0.4999f) {
           prevPidResult = pidResult;
           newTemp += pidResult;
 
-          Log.sinfoln(FPSTR(L_REGULATOR_PID), F("New result: %hhd (%.2f)"), (int8_t) round(pidResult), pidResult);
+          Log.sinfoln(FPSTR(L_REGULATOR_PID), F("New result: %.2f"), pidResult);
+          Log.straceln(FPSTR(L_REGULATOR_PID), F("Integral: %.2f"), pidRegulator.integral);
 
         } else {
           newTemp += prevPidResult;
@@ -174,6 +158,10 @@ protected:
       } else {
         newTemp += prevPidResult;
       }
+
+    } else if (fabs(pidRegulator.integral) > 0.0001f) {
+        pidRegulator.integral = 0;
+        Log.sinfoln(FPSTR(L_REGULATOR_PID), F("Integral sum has been reset"));
     }
 
     // default temp, manual mode
@@ -181,97 +169,9 @@ protected:
       newTemp = settings.heating.target;
     }
 
-    newTemp = round(newTemp);
     return newTemp;
   }
 
-  byte getTuningModeTemp() {
-    if (tunerInit && (!vars.tuning.enable || vars.tuning.regulator != tunerRegulator)) {
-      if (tunerRegulator == 0) {
-        pidTuner.reset();
-      }
-
-      tunerInit = false;
-      tunerRegulator = 0;
-      tunerState = 0;
-      Log.sinfoln("REGULATOR.TUNING", F("Stopped"));
-    }
-
-    if (!vars.tuning.enable) {
-      return 0;
-    }
-
-
-    if (vars.tuning.regulator == 0) {
-      // @TODO дописать
-      Log.sinfoln("REGULATOR.TUNING.EQUITHERM", F("Not implemented"));
-      return 0;
-
-    } else if (vars.tuning.regulator == 1) {
-      // PID tuner
-      float defaultTemp = settings.equitherm.enable
-        ? getEquithermTemp(settings.heating.minTemp, settings.heating.maxTemp)
-        : settings.heating.target;
-
-      if (tunerInit && pidTuner.getState() == 3) {
-        Log.sinfoln("REGULATOR.TUNING.PID", F("Finished"));
-        for (Stream* stream : Log.getStreams()) {
-          pidTuner.debugText(stream);
-        }
-
-        pidTuner.reset();
-        tunerInit = false;
-        tunerRegulator = 0;
-        tunerState = 0;
-
-        if (pidTuner.getAccuracy() < 90) {
-          Log.swarningln("REGULATOR.TUNING.PID", F("Bad result, try again..."));
-
-        } else {
-          settings.pid.p_factor = pidTuner.getPID_p();
-          settings.pid.i_factor = pidTuner.getPID_i();
-          settings.pid.d_factor = pidTuner.getPID_d();
-
-          return 0;
-        }
-      }
-
-      if (!tunerInit) {
-        Log.sinfoln("REGULATOR.TUNING.PID", F("Start..."));
-
-        float step;
-        if (vars.temperatures.indoor - vars.temperatures.outdoor > 10) {
-          step = ceil(vars.parameters.heatingSetpoint / vars.temperatures.indoor * 2);
-        } else {
-          step = 5.0f;
-        }
-
-        float startTemp = step;
-        Log.sinfoln("REGULATOR.TUNING.PID", F("Started. Start value: %f, step: %f"), startTemp, step);
-        pidTuner.setParameters(NORMAL, startTemp, step, 20 * 60 * 1000, 0.15, 60 * 1000, 10000);
-        tunerInit = true;
-        tunerRegulator = 1;
-      }
-
-      pidTuner.setInput(vars.temperatures.indoor);
-      pidTuner.compute();
-
-      if (tunerState > 0 && pidTuner.getState() != tunerState) {
-        Log.sinfoln("REGULATOR.TUNING.PID", F("Log:"));
-        for (Stream* stream : Log.getStreams()) {
-          pidTuner.debugText(stream);
-        }
-        
-        tunerState = pidTuner.getState();
-      }
-
-      return round(defaultTemp + pidTuner.getOutput());
-
-    } else {
-      return 0;
-    }
-  }
-
   /**
    * @brief Get the Equitherm Temp
    * Calculations in degrees C, conversion occurs when using F
@@ -294,8 +194,15 @@ protected:
     }
 
     if (vars.states.emergency) {
+      if (settings.sensors.indoor.type == SensorType::MANUAL) {
         etRegulator.Kt = 0;
         etRegulator.indoorTemp = 0;
+
+      } else {
+        etRegulator.Kt = settings.equitherm.t_factor;
+        etRegulator.indoorTemp = indoorTemp;
+      }
+      
       etRegulator.outdoorTemp = outdoorTemp;
 
     } else if (settings.pid.enable) {
@@ -327,9 +234,23 @@ protected:
   }
 
   float getPidTemp(int minTemp, int maxTemp) {
+    if (fabs(pidRegulator.Kp - settings.pid.p_factor) >= 0.0001f) {
       pidRegulator.Kp = settings.pid.p_factor;
+      pidRegulator.integral = 0;
+      Log.sinfoln(FPSTR(L_REGULATOR_PID), F("Integral sum has been reset"));
+    }
+
+    if (fabs(pidRegulator.Ki - settings.pid.i_factor) >= 0.0001f) {
       pidRegulator.Ki = settings.pid.i_factor;
+      pidRegulator.integral = 0;
+      Log.sinfoln(FPSTR(L_REGULATOR_PID), F("Integral sum has been reset"));
+    }
+
+    if (fabs(pidRegulator.Kd - settings.pid.d_factor) >= 0.0001f) {
       pidRegulator.Kd = settings.pid.d_factor;
+      pidRegulator.integral = 0;
+      Log.sinfoln(FPSTR(L_REGULATOR_PID), F("Integral sum has been reset"));
+    }
 
     pidRegulator.setLimits(minTemp, maxTemp);
     pidRegulator.setDt(settings.pid.dt * 1000u);
@@ -338,32 +259,4 @@ protected:
 
     return pidRegulator.getResultTimer();
   }
-
-  float tuneEquithermN(float ratio, float currentTemp, float setTemp, unsigned int dirtyInterval = 60, unsigned int accurateInterval = 1800, float accurateStep = 0.01, float accurateStepAfter = 1) {
-    static uint32_t _prevIteration = millis();
-
-    if (abs(currentTemp - setTemp) < accurateStepAfter) {
-      if (millis() - _prevIteration < (accurateInterval * 1000)) {
-        return ratio;
-      }
-
-      if (currentTemp - setTemp > 0.1f) {
-        ratio -= accurateStep;
-
-      } else if (currentTemp - setTemp < -0.1f) {
-        ratio += accurateStep;
-      }
-
-    } else {
-      if (millis() - _prevIteration < (dirtyInterval * 1000)) {
-        return ratio;
-      }
-
-      ratio = ratio * (setTemp / currentTemp);
-    }
-
-    _prevIteration = millis();
-    return ratio;
-  }
-
 };

src/SensorsTask.h

@@ -43,29 +43,36 @@ protected:
   float filteredIndoorTemp = 0;
   bool emptyIndoorTemp = true;
 
-#if USE_BLE
+  #if defined(ARDUINO_ARCH_ESP32)
+  #if USE_BLE
   BLEClient* pBleClient = nullptr;
   bool initBleSensor = false;
   bool initBleNotify = false;
-#endif
+  #endif
 
-  const char* getTaskName() {
+  const char* getTaskName() override {
     return "Sensors";
   }
 
-  /*int getTaskCore() {
+  BaseType_t getTaskCore() override {
-    return 1;
+    // https://github.com/h2zero/NimBLE-Arduino/issues/676
-  }*/
+    #if USE_BLE && defined(CONFIG_BT_NIMBLE_PINNED_TO_CORE)
+    return CONFIG_BT_NIMBLE_PINNED_TO_CORE;
+    #else
+    return tskNO_AFFINITY;
+    #endif
+  }
 
-  int getTaskPriority() {
+  int getTaskPriority() override {
     return 4;
   }
+  #endif
 
   void loop() {
     bool indoorTempUpdated = false;
     bool outdoorTempUpdated = false;
 
-    if (settings.sensors.outdoor.type == SensorType::DS18B20 && GPIO_IS_VALID(settings.sensors.indoor.gpio)) {
+    if (settings.sensors.outdoor.type == SensorType::DS18B20 && GPIO_IS_VALID(settings.sensors.outdoor.gpio)) {
       outdoorTemperatureSensor();
       outdoorTempUpdated = true;
     }
@@ -90,7 +97,7 @@ protected:
         newTemp += c2f(this->filteredOutdoorTemp);
       }
 
-      if (fabs(vars.temperatures.outdoor - newTemp) > 0.099) {
+      if (fabs(vars.temperatures.outdoor - newTemp) > 0.099f) {
         vars.temperatures.outdoor = newTemp;
         Log.sinfoln(FPSTR(L_SENSORS_OUTDOOR), F("New temp: %f"), vars.temperatures.outdoor);
       }
@@ -105,7 +112,7 @@ protected:
         newTemp += c2f(this->filteredIndoorTemp);
       }
 
-      if (fabs(vars.temperatures.indoor - newTemp) > 0.099) {
+      if (fabs(vars.temperatures.indoor - newTemp) > 0.099f) {
         vars.temperatures.indoor = newTemp;
         Log.sinfoln(FPSTR(L_SENSORS_INDOOR), F("New temp: %f"), vars.temperatures.indoor);
       }
@@ -163,7 +170,7 @@ protected:
             return;
           }
 
-          float rawTemp = ((pData[0] | (pData[1] << 8)) * 0.01);
+          float rawTemp = ((pData[0] | (pData[1] << 8)) * 0.01f);
           Log.straceln(FPSTR(L_SENSORS_INDOOR), F("Raw temp: %f"), rawTemp);
 
           if (this->emptyIndoorTemp) {
@@ -235,7 +242,7 @@ protected:
         return;
       }
 
-      Log.sinfoln(FPSTR(L_SENSORS_OUTDOOR), F("Starting on gpio %hhu..."), settings.sensors.outdoor.gpio);
+      Log.sinfoln(FPSTR(L_SENSORS_OUTDOOR), F("Starting on GPIO %hhu..."), settings.sensors.outdoor.gpio);
 
       this->oneWireOutdoorSensor->begin(settings.sensors.outdoor.gpio);
       this->oneWireOutdoorSensor->reset();
@@ -307,7 +314,7 @@ protected:
         return;
       }
       
-      Log.sinfoln(FPSTR(L_SENSORS_INDOOR), F("Starting on gpio %hhu..."), settings.sensors.indoor.gpio);
+      Log.sinfoln(FPSTR(L_SENSORS_INDOOR), F("Starting on GPIO %hhu..."), settings.sensors.indoor.gpio);
 
       this->oneWireIndoorSensor->begin(settings.sensors.indoor.gpio);
       this->oneWireIndoorSensor->reset();

src/Settings.h

@@ -51,6 +51,8 @@ struct Settings {
     byte inGpio = DEFAULT_OT_IN_GPIO;
     byte outGpio = DEFAULT_OT_OUT_GPIO;
     byte rxLedGpio = DEFAULT_OT_RX_LED_GPIO;
+    byte faultStateGpio = DEFAULT_OT_FAULT_STATE_GPIO;
+    byte invertFaultState = false;
     unsigned int memberIdCode = 0;
     bool dhwPresent = true;
     bool summerWinterMode = false;
@@ -60,6 +62,7 @@ struct Settings {
     bool dhwBlocking = false;
     bool modulationSyncWithHeating = false;
     bool getMinMaxTemp = true;
+    bool nativeHeatingControl = false;
   } opentherm;
 
   struct {
@@ -70,11 +73,12 @@ struct Settings {
     char password[33] = DEFAULT_MQTT_PASSWORD;
     char prefix[33] = DEFAULT_MQTT_PREFIX;
     unsigned short interval = 5;
+    bool homeAssistantDiscovery = true;
   } mqtt;
 
   struct {
     bool enable = true;
-    float target = 40.0f;
+    float target = DEFAULT_HEATING_TARGET_TEMP;
     unsigned short tresholdTime = 120;
     bool useEquitherm = false;
     bool usePid = false;
@@ -85,7 +89,7 @@ struct Settings {
   struct {
     bool enable = true;
     bool turbo = false;
-    float target = 40.0f;
+    float target = DEFAULT_HEATING_TARGET_TEMP;
     float hysteresis = 0.5f;
     byte minTemp = DEFAULT_HEATING_MIN_TEMP;
     byte maxTemp = DEFAULT_HEATING_MAX_TEMP;
@@ -94,16 +98,16 @@ struct Settings {
 
   struct {
     bool enable = true;
-    byte target = 40;
+    float target = DEFAULT_DHW_TARGET_TEMP;
     byte minTemp = DEFAULT_DHW_MIN_TEMP;
     byte maxTemp = DEFAULT_DHW_MAX_TEMP;
   } dhw;
 
   struct {
     bool enable = false;
-    float p_factor = 50;
+    float p_factor = 2;
-    float i_factor = 0.006f;
+    float i_factor = 0.0055f;
-    float d_factor = 10000;
+    float d_factor = 0;
     unsigned short dt = 180;
     byte minTemp = 0;
     byte maxTemp = DEFAULT_HEATING_MAX_TEMP;
@@ -143,11 +147,6 @@ struct Settings {
 } settings;
 
 struct Variables {
-  struct {
-    bool enable = false;
-    byte regulator = 0;
-  } tuning;
-
   struct {
     bool otStatus = false;
     bool emergency = false;
@@ -181,7 +180,7 @@ struct Variables {
     bool heatingEnabled = false;
     byte heatingMinTemp = DEFAULT_HEATING_MIN_TEMP;
     byte heatingMaxTemp = DEFAULT_HEATING_MAX_TEMP;
-    byte heatingSetpoint = 0;
+    float heatingSetpoint = 0;
     unsigned long extPumpLastEnableTime = 0;
     byte dhwMinTemp = DEFAULT_DHW_MIN_TEMP;
     byte dhwMaxTemp = DEFAULT_DHW_MAX_TEMP;

src/defines.h

@@ -1,5 +1,4 @@
 #define PROJECT_NAME                    "OpenTherm Gateway"
-#define PROJECT_VERSION             "1.4.0-rc.22"
 #define PROJECT_REPO                    "https://github.com/Laxilef/OTGateway"
 
 #define MQTT_RECONNECT_INTERVAL         15000
@@ -9,13 +8,28 @@
 
 #define CONFIG_URL                      "http://%s/"
 #define SETTINGS_VALID_VALUE            "stvalid" // only 8 chars!
-
 #define GPIO_IS_NOT_CONFIGURED          0xff
+
+#define DEFAULT_HEATING_TARGET_TEMP     40
 #define DEFAULT_HEATING_MIN_TEMP        20
 #define DEFAULT_HEATING_MAX_TEMP        90
+
+#define DEFAULT_DHW_TARGET_TEMP         40
 #define DEFAULT_DHW_MIN_TEMP            30
 #define DEFAULT_DHW_MAX_TEMP            60
 
+#define THERMOSTAT_INDOOR_DEFAULT_TEMP  20
+#define THERMOSTAT_INDOOR_MIN_TEMP      5
+#define THERMOSTAT_INDOOR_MAX_TEMP      30
+
+#ifndef BUILD_VERSION
+  #define BUILD_VERSION                 "0.0.0"
+#endif
+
+#ifndef BUILD_ENV
+  #define BUILD_ENV                     "undefined"
+#endif
+
 #ifndef USE_SERIAL
   #define USE_SERIAL true
 #endif
@@ -96,6 +110,10 @@
   #define DEFAULT_OT_RX_LED_GPIO GPIO_IS_NOT_CONFIGURED
 #endif
 
+#ifndef DEFAULT_OT_FAULT_STATE_GPIO
+  #define DEFAULT_OT_FAULT_STATE_GPIO GPIO_IS_NOT_CONFIGURED
+#endif
+
 #ifndef DEFAULT_SENSOR_OUTDOOR_GPIO
   #define DEFAULT_SENSOR_OUTDOOR_GPIO GPIO_IS_NOT_CONFIGURED
 #endif
@@ -112,7 +130,9 @@
   #define PROGMEM 
 #endif
 
-#ifndef GPIO_IS_VALID_GPIO
+#ifdef ARDUINO_ARCH_ESP32
+  #include <driver/gpio.h>
+#elif !defined(GPIO_IS_VALID_GPIO)
   #define GPIO_IS_VALID_GPIO(gpioNum) (gpioNum >= 0 && gpioNum <= 16)
 #endif
 

src/main.cpp

@@ -4,11 +4,11 @@
 #include <ArduinoJson.h>
 #include <FileData.h>
 #include <LittleFS.h>
-#include "ESPTelnetStream.h"
+#include <ESPTelnetStream.h>
 #include <TinyLogger.h>
-#include <NetworkManager.h>
+#include <NetworkMgr.h>
 #include "Settings.h"
-#include <utils.h>
+#include "utils.h"
 
 #if defined(ARDUINO_ARCH_ESP32)
   #include <ESP32Scheduler.h>
@@ -27,11 +27,13 @@
 #include "PortalTask.h"
 #include "MainTask.h"
 
+using namespace NetworkUtils;
+
 // Vars
 FileData fsNetworkSettings(&LittleFS, "/network.conf", 'n', &networkSettings, sizeof(networkSettings), 1000);
 FileData fsSettings(&LittleFS, "/settings.conf", 's', &settings, sizeof(settings), 60000);
 ESPTelnetStream* telnetStream = nullptr;
-Network::Manager* network = nullptr;
+NetworkMgr* network = nullptr;
 
 // Tasks
 MqttTask* tMqtt;
@@ -59,7 +61,7 @@ void setup() {
     return tm{sec, min, hour};
   });
   
-  Serial.begin(settings.system.serial.baudrate);
+  Serial.begin(115200);
   Log.addStream(&Serial);
   Log.print("\n\n\r");
 
@@ -110,8 +112,15 @@ void setup() {
 
   // logs
   if (!settings.system.serial.enable) {
-    Log.clearStreams();
     Serial.end();
+    Log.clearStreams();
+
+  } else if (settings.system.serial.baudrate != 115200) {
+    Serial.end();
+    Log.clearStreams();
+
+    Serial.begin(settings.system.serial.baudrate);
+    Log.addStream(&Serial);
   }
 
   if (settings.system.telnet.enable) {
@@ -123,7 +132,7 @@ void setup() {
   Log.setLevel(settings.system.debug ? TinyLogger::Level::VERBOSE : TinyLogger::Level::INFO);
 
   // network
-  network = (new Network::Manager)
+  network = (new NetworkMgr)
     ->setHostname(networkSettings.hostname)
     ->setStaCredentials(
     #ifdef WOKWI

src_data/dashboard.html

@@ -38,8 +38,8 @@
                   <div class="thermostat-temp-target"><span id="thermostat-heating-target"></span> <span class="temp-unit"></span></div>
                   <div class="thermostat-temp-current">Current: <span id="thermostat-heating-current"></span> <span class="temp-unit"></span></div>
                 </div>
-                <div class="thermostat-minus"><button id="thermostat-heating-minus" class="outline"><b>-</b></button></div>
+                <div class="thermostat-minus"><button id="thermostat-heating-minus" class="outline"><i class="icons-down"></i></button></div>
-                <div class="thermostat-plus"><button id="thermostat-heating-plus" class="outline"><b>+</b></button></div>
+                <div class="thermostat-plus"><button id="thermostat-heating-plus" class="outline"><i class="icons-up"></i></button></div>
                 <div class="thermostat-control">
                   <input type="checkbox" role="switch" id="thermostat-heating-enabled" value="true">
                   <label htmlFor="thermostat-heating-enabled">Enable</label>
@@ -55,8 +55,8 @@
                   <div class="thermostat-temp-target"><span id="thermostat-dhw-target"></span> <span class="temp-unit"></span></div>
                   <div class="thermostat-temp-current">Current: <span id="thermostat-dhw-current"></span> <span class="temp-unit"></span></div>
                 </div>
-                <div class="thermostat-minus"><button class="outline" id="thermostat-dhw-minus"><b>-</b></button></div>
+                <div class="thermostat-minus"><button class="outline" id="thermostat-dhw-minus"><i class="icons-down"></i></button></div>
-                <div class="thermostat-plus"><button class="outline" id="thermostat-dhw-plus"><b>+</b></button></div>
+                <div class="thermostat-plus"><button class="outline" id="thermostat-dhw-plus"><i class="icons-up"></i></button></div>
                 <div class="thermostat-control">
                   <input type="checkbox" role="switch" id="thermostat-dhw-enabled" value="true">
                   <label htmlFor="thermostat-dhw-enabled">Enable</label>
@@ -250,7 +250,7 @@
             return;
           }
           
-          newSettings.dhw.target -= 1;
+          newSettings.dhw.target -= 1.0;
           modifiedTime = Date.now();
 
           if (newSettings.dhw.target < prevSettings.dhw.minTemp) {
@@ -265,7 +265,7 @@
             return;
           }
           
-          newSettings.dhw.target += 1;
+          newSettings.dhw.target += 1.0;
           modifiedTime = Date.now();
 
           if (newSettings.dhw.target > prevSettings.dhw.maxTemp) {
@@ -287,7 +287,7 @@
 
         document.querySelector('#thermostat-dhw-enabled').addEventListener('change', (event) => {
           modifiedTime = Date.now();
-          newSettings.heating.dhw = event.currentTarget.checked;
+          newSettings.dhw.enable = event.currentTarget.checked;
         });
 
         setTimeout(async function onLoadPage() {
@@ -326,7 +326,7 @@
             }
 
             const result = await response.json();
-            noRegulators = !result.equitherm.enable && !result.pid.enable;
+            noRegulators = !result.opentherm.nativeHeatingControl && !result.equitherm.enable && !result.pid.enable;
             prevSettings = result;
             newSettings.heating.enable = result.heating.enable;
             newSettings.heating.turbo = result.heating.turbo;

src_data/index.html

@@ -87,11 +87,11 @@
             <tbody>
               <tr>
                 <th scope="row">Version:</th>
-                <td><b id="version"></b></td>
+                <td><b id="build-version"></b></td>
               </tr>
               <tr>
-                <th scope="row">Build date:</th>
+                <th scope="row">Build:</th>
-                <td><b id="build-date"></b></td>
+                <td>Env: <b id="build-env"></b><br />Date: <b id="build-date"></b><br />Core/SDK: <b id="core-version"></b></td>
               </tr>
               <tr>
                 <th scope="row">Uptime:</th>
@@ -101,6 +101,10 @@
                 <th scope="row">Free memory:</th>
                 <td><b id="free-heap"></b> of <b id="total-heap"></b> bytes (min: <b id="min-free-heap"></b> bytes)<br />max free block: <b id="max-free-block-heap"></b> bytes (min: <b id="min-max-free-block-heap"></b> bytes)</td>
               </tr>
+              <tr>
+                <th scope="row">Board:</th>
+                <td>Chip <b id="chip-model"></b> (rev. <span id="chip-revision"></span>)<br />Cores: <b id="chip-cores"></b>, frequency: <b id="cpu-freq"></b> mHz<br />Flash size: <b id="flash-size"></b> MB (real: <b id="flash-real-size"></b> MB)</td>
+              </tr>
               <tr>
                 <th scope="row">Last reset reason:</th>
                 <td><b id="reset-reason"></b></td>
@@ -151,8 +155,9 @@
             setValue('#network-dns', result.network.dns);
             setBusy('#main-busy', '#main-table', false);
 
-            setValue('#version', result.system.version);
+            setValue('#build-version', result.system.buildVersion);
             setValue('#build-date', result.system.buildDate);
+            setValue('#build-env', result.system.buildEnv);
             setValue('#uptime', result.system.uptime);
             setValue('#uptime-days', Math.floor(result.system.uptime / 86400));
             setValue('#uptime-hours', Math.floor(result.system.uptime % 86400 / 3600));
@@ -164,6 +169,15 @@
             setValue('#max-free-block-heap', result.system.maxFreeBlockHeap);
             setValue('#min-max-free-block-heap', result.system.minMaxFreeBlockHeap);
             setValue('#reset-reason', result.system.resetReason);
+            
+            setValue('#chip-model', result.system.chipModel);
+            setValue('#chip-revision', result.system.chipRevision);
+            setValue('#chip-cores', result.system.chipCores);
+            setValue('#cpu-freq', result.system.cpuFreq);
+            setValue('#core-version', result.system.coreVersion);
+            setValue('#flash-size', result.system.flashSize / 1024 / 1024);
+            setValue('#flash-real-size', result.system.flashRealSize / 1024 / 1024);
+
             setBusy('#system-busy', '#system-table', false);
 
           } catch (error) {

src_data/network.html

@@ -76,18 +76,18 @@
         </hgroup>
 
         <form action="/api/network/scan" id="network-scan">
-          <figure style="max-height: 25em;">
+          <div style="max-height: 25rem;" class="overflow-auto">
             <table id="networks" role="grid">
               <thead>
                 <tr>
                   <th scope="col">#</th>
                   <th scope="col">SSID</th>
-                  <th scope="col">Signal</th>
+                  <th scope="col">Info</th>
                 </tr>
               </thead>
               <tbody></tbody>
             </table>
-          </figure>
+          </div>
 
           <button type="submit">Refresh</button>
         </form>
@@ -167,6 +167,26 @@
   <script src="/static/app.js"></script>
   <script>
     window.onload = async function () {
+      const fillData = (data) => {
+        setInputValue('#network-hostname', data.hostname);
+        setCheckboxValue('#network-use-dhcp', data.useDhcp);
+        setInputValue('#network-static-ip', data.staticConfig.ip);
+        setInputValue('#network-static-gateway', data.staticConfig.gateway);
+        setInputValue('#network-static-subnet', data.staticConfig.subnet);
+        setInputValue('#network-static-dns', data.staticConfig.dns);
+        setBusy('#network-settings-busy', '#network-settings', false);
+
+        setInputValue('#sta-ssid', data.sta.ssid);
+        setInputValue('#sta-password', data.sta.password);
+        setInputValue('#sta-channel', data.sta.channel);
+        setBusy('#sta-settings-busy', '#sta-settings', false);
+
+        setInputValue('#ap-ssid', data.ap.ssid);
+        setInputValue('#ap-password', data.ap.password);
+        setInputValue('#ap-channel', data.ap.channel);
+        setBusy('#ap-settings-busy', '#ap-settings', false);
+      };
+
       try {
         const response = await fetch('/api/network/settings', { cache: 'no-cache' });
         if (!response.ok) {
@@ -174,32 +194,16 @@
         }
 
         const result = await response.json();
-        setInputValue('#network-hostname', result.hostname);
+        fillData(result);
-        setCheckboxValue('#network-use-dhcp', result.useDhcp);
-        setInputValue('#network-static-ip', result.staticConfig.ip);
-        setInputValue('#network-static-gateway', result.staticConfig.gateway);
-        setInputValue('#network-static-subnet', result.staticConfig.subnet);
-        setInputValue('#network-static-dns', result.staticConfig.dns);
-        setBusy('#network-settings-busy', '#network-settings', false);
 
-        setInputValue('#sta-ssid', result.sta.ssid);
+        setupForm('#network-settings', fillData, ['hostname']);
-        setInputValue('#sta-password', result.sta.password);
+        setupNetworkScanForm('#network-scan', '#networks');
-        setInputValue('#sta-channel', result.sta.channel);
+        setupForm('#sta-settings', fillData, ['sta.ssid', 'sta.password']);
-        setBusy('#sta-settings-busy', '#sta-settings', false);
+        setupForm('#ap-settings', fillData, ['ap.ssid', 'ap.password']);
-
-        setInputValue('#ap-ssid', result.ap.ssid);
-        setInputValue('#ap-password', result.ap.password);
-        setInputValue('#ap-channel', result.ap.channel);
-        setBusy('#ap-settings-busy', '#ap-settings', false);
 
       } catch (error) {
         console.log(error);
       }
-
-      setupForm('#network-settings');
-      setupNetworkScanForm('#network-scan', '#networks');
-      setupForm('#sta-settings');
-      setupForm('#ap-settings');
     };
   </script>
 </body>

src_data/settings.html

@@ -67,12 +67,12 @@
               <legend>Unit system</legend>
 
               <label>
-                <input type="radio" id="system-unit-system" name="system[unitSystem]" value="0" />
+                <input type="radio" class="system-unit-system" name="system[unitSystem]" value="0" />
                 Metric (celsius, liters, bar)
               </label>
 
               <label>
-                <input type="radio" id="system-unit-system" name="system[unitSystem]" value="1" />
+                <input type="radio" class="system-unit-system" name="system[unitSystem]" value="1" />
                 Imperial (fahrenheit, gallons, psi)
               </label>
             </fieldset>
@@ -116,9 +116,7 @@
                   <small>Default: 23</small>
                 </label>
               </div>
-            </fieldset>
 
-            <fieldset>
               <mark>After changing this settings, the ESP must be restarted for the changes to take effect.</mark>
             </fieldset>
 
@@ -317,7 +315,7 @@
 
               <label for="pid-i-factor">
                 I factor
-                <input type="number" inputmode="numeric" id="pid-i-factor" name="pid[i_factor]" min="0" max="100" step="0.001" required>
+                <input type="number" inputmode="numeric" id="pid-i-factor" name="pid[i_factor]" min="0" max="100" step="0.0001" required>
               </label>
 
               <label for="pid-d-factor">
@@ -361,12 +359,12 @@
               <legend>Unit system</legend>
 
               <label>
-                <input type="radio" id="opentherm-unit-system" name="opentherm[unitSystem]" value="0" />
+                <input type="radio" class="opentherm-unit-system" name="opentherm[unitSystem]" value="0" />
                 Metric (celsius)
               </label>
 
               <label>
-                <input type="radio" id="opentherm-unit-system" name="opentherm[unitSystem]" value="1" />
+                <input type="radio" class="opentherm-unit-system" name="opentherm[unitSystem]" value="1" />
                 Imperial (fahrenheit)
               </label>
             </fieldset>
@@ -437,6 +435,27 @@
                 <input type="checkbox" id="opentherm-get-min-max-temp" name="opentherm[getMinMaxTemp]" value="true">
                 Get min/max temp from boiler
               </label>
+
+              <hr />
+              <fieldset>
+                <label for="opentherm-fault-state-gpio">
+                  Fault state GPIO
+                  <input type="number" inputmode="numeric" id="opentherm-fault-state-gpio" name="opentherm[faultStateGpio]" min="0" max="254" step="1">
+                  <small>Can be useful to switch on another boiler <u>via relay</u>. Blank - not use.</small>
+                </label>
+  
+                <label for="opentherm-invert-fault-state">
+                  <input type="checkbox" id="opentherm-invert-fault-state" name="opentherm[invertFaultState]" value="true">
+                  Invert fault state
+                </label>
+              </fieldset>
+              
+              <hr />
+              <label for="opentherm-native-heating-control">
+                <input type="checkbox" id="opentherm-native-heating-control" name="opentherm[nativeHeatingControl]" value="true">
+                Native heating control (boiler)<br />
+                <small>Works <u>ONLY</u> if the boiler requires the desired room temperature and regulates the temperature of the coolant itself. Not compatible with PID and Equitherm regulators and hysteresis in firmware.</small>
+              </label>
             </fieldset>
 
             <button type="submit">Save</button>
@@ -456,6 +475,11 @@
                 <input type="checkbox" id="mqtt-enable" name="mqtt[enable]" value="true">
                 Enable
               </label>
+
+              <label for="mqtt-ha-discovery">
+                <input type="checkbox" id="mqtt-ha-discovery" name="mqtt[homeAssistantDiscovery]" value="true">
+                Home Assistant Discovery
+              </label>
             </fieldset>
 
             <div class="grid">
@@ -510,17 +534,17 @@
               <legend>Source type</legend>
 
               <label>
-                <input type="radio" id="outdoor-sensor-type" name="sensors[outdoor][type]" value="0" />
+                <input type="radio" class="outdoor-sensor-type" name="sensors[outdoor][type]" value="0" />
                 From boiler via OpenTherm
               </label>
 
               <label>
-                <input type="radio" id="outdoor-sensor-type" name="sensors[outdoor][type]" value="1" />
+                <input type="radio" class="outdoor-sensor-type" name="sensors[outdoor][type]" value="1" />
                 Manual via MQTT/API
               </label>
 
               <label>
-                <input type="radio" id="outdoor-sensor-type" name="sensors[outdoor][type]" value="2" />
+                <input type="radio" class="outdoor-sensor-type" name="sensors[outdoor][type]" value="2" />
                 External (DS18B20)
               </label>
             </fieldset>
@@ -551,17 +575,17 @@
               <legend>Source type</legend>
 
               <label>
-                <input type="radio" id="indoor-sensor-type" name="sensors[indoor][type]" value="1" />
+                <input type="radio" class="indoor-sensor-type" name="sensors[indoor][type]" value="1" />
                 Manual via MQTT/API
               </label>
 
               <label>
-                <input type="radio" id="indoor-sensor-type" name="sensors[indoor][type]" value="2" />
+                <input type="radio" class="indoor-sensor-type" name="sensors[indoor][type]" value="2" />
                 External (DS18B20)
               </label>
 
               <label>
-                <input type="radio" id="indoor-sensor-type" name="sensors[indoor][type]" value="3" />
+                <input type="radio" class="indoor-sensor-type" name="sensors[indoor][type]" value="3" />
                 BLE device <i>(ONLY for some ESP32 which support BLE)</i>
               </label>
             </fieldset>
@@ -655,7 +679,7 @@
         setInputValue('#system-serial-baudrate', data.system.serial.baudrate);
         setCheckboxValue('#system-telnet-enable', data.system.telnet.enable);
         setInputValue('#system-telnet-port', data.system.telnet.port);
-        setRadioValue('#system-unit-system', data.system.unitSystem);
+        setRadioValue('.system-unit-system', data.system.unitSystem);
         setInputValue('#system-status-led-gpio', data.system.statusLedGpio < 255 ? data.system.statusLedGpio : '');
         setBusy('#system-settings-busy', '#system-settings', false);
 
@@ -666,10 +690,12 @@
         setBusy('#portal-settings-busy', '#portal-settings', false);
 
         // Opentherm
-        setRadioValue('#opentherm-unit-system', data.opentherm.unitSystem);
+        setRadioValue('.opentherm-unit-system', data.opentherm.unitSystem);
         setInputValue('#opentherm-in-gpio', data.opentherm.inGpio < 255 ? data.opentherm.inGpio : '');
         setInputValue('#opentherm-out-gpio', data.opentherm.outGpio < 255 ? data.opentherm.outGpio : '');
         setInputValue('#opentherm-rx-led-gpio', data.opentherm.rxLedGpio < 255 ? data.opentherm.rxLedGpio : '');
+        setInputValue('#opentherm-fault-state-gpio', data.opentherm.faultStateGpio < 255 ? data.opentherm.faultStateGpio : '');
+        setCheckboxValue('#opentherm-invert-fault-state', data.opentherm.invertFaultState);
         setInputValue('#opentherm-member-id-code', data.opentherm.memberIdCode);
         setCheckboxValue('#opentherm-dhw-present', data.opentherm.dhwPresent);
         setCheckboxValue('#opentherm-sw-mode', data.opentherm.summerWinterMode);
@@ -679,10 +705,12 @@
         setCheckboxValue('#opentherm-dhw-blocking', data.opentherm.dhwBlocking);
         setCheckboxValue('#opentherm-sync-modulation-with-heating', data.opentherm.modulationSyncWithHeating);
         setCheckboxValue('#opentherm-get-min-max-temp', data.opentherm.getMinMaxTemp);
+        setCheckboxValue('#opentherm-native-heating-control', data.opentherm.nativeHeatingControl);
         setBusy('#opentherm-settings-busy', '#opentherm-settings', false);
 
         // MQTT
         setCheckboxValue('#mqtt-enable', data.mqtt.enable);
+        setCheckboxValue('#mqtt-ha-discovery', data.mqtt.homeAssistantDiscovery);
         setInputValue('#mqtt-server', data.mqtt.server);
         setInputValue('#mqtt-port', data.mqtt.port);
         setInputValue('#mqtt-user', data.mqtt.user);
@@ -692,13 +720,13 @@
         setBusy('#mqtt-settings-busy', '#mqtt-settings', false);
 
         // Outdoor sensor
-        setRadioValue('#outdoor-sensor-type', data.sensors.outdoor.type);
+        setRadioValue('.outdoor-sensor-type', data.sensors.outdoor.type);
         setInputValue('#outdoor-sensor-gpio', data.sensors.outdoor.gpio  < 255 ? data.sensors.outdoor.gpio : '');
         setInputValue('#outdoor-sensor-offset', data.sensors.outdoor.offset);
         setBusy('#outdoor-sensor-settings-busy', '#outdoor-sensor-settings', false);
 
         // Indoor sensor
-        setRadioValue('#indoor-sensor-type', data.sensors.indoor.type);
+        setRadioValue('.indoor-sensor-type', data.sensors.indoor.type);
         setInputValue('#indoor-sensor-gpio', data.sensors.indoor.gpio < 255 ? data.sensors.indoor.gpio : '');
         setInputValue('#indoor-sensor-offset', data.sensors.indoor.offset);
         setInputValue('#indoor-sensor-ble-addresss', data.sensors.indoor.bleAddresss);
@@ -781,7 +809,8 @@
 
         const result = await response.json();
         fillData(result);
-        setupForm('#portal-settings', fillData);
+        
+        setupForm('#portal-settings', fillData, ['portal.login', 'portal.password']);
         setupForm('#system-settings', fillData);
         setupForm('#heating-settings', fillData);
         setupForm('#dhw-settings', fillData);
@@ -789,9 +818,9 @@
         setupForm('#equitherm-settings', fillData);
         setupForm('#pid-settings', fillData);
         setupForm('#opentherm-settings', fillData);
-        setupForm('#mqtt-settings', fillData);
+        setupForm('#mqtt-settings', fillData, ['mqtt.user', 'mqtt.password', 'mqtt.prefix']);
         setupForm('#outdoor-sensor-settings', fillData);
-        setupForm('#indoor-sensor-settings', fillData);
+        setupForm('#indoor-sensor-settings', fillData, ['sensors.indoor.bleAddresss']);
         setupForm('#extpump-settings', fillData);
 
       } catch (error) {

src_data/static/app.css

@@ -86,18 +86,6 @@ tr.network:hover {
 	cursor: pointer;
 }
 
-.greatSignal {
-	background-color: var(--pico-form-element-valid-border-color);
-}
-
-.normalSignal {
-	background-color: #e48500;
-}
-
-.badSignal {
-	background-color: var(--pico-form-element-invalid-border-color);
-}
-
 .primary {
 	border: 0.25rem solid var(--pico-form-element-invalid-border-color);
 	padding: 1rem;
@@ -194,3 +182,13 @@ tr.network:hover {
 
 	margin: 1.25rem 0;
 }
+
+[class*=" icons-"],[class=icons],[class^=icons-] {font-size: 1.35rem; }
+*:has(> [class*=" icons-"], > [class=icons], > [class^=icons-]):has(+ * > [class*=" icons-"], + * > [class=icons], + * > [class^=icons-]) { margin: 0 0.5rem 0 0; }
+[data-tooltip]:has(> [class*=" icons-"], > [class=icons], > [class^=icons-]) { border: 0!important; }
+
+
+/*!
+ *  Icons icon font. Generated by Iconly: https://iconly.io/
+ */
+ @font-face{font-display:auto;font-family:"Icons";font-style:normal;font-weight:400;src:url(./fonts/iconly.eot?1717885802370);src:url(./fonts/iconly.eot?#iefix) format("embedded-opentype"),url(./fonts/iconly.woff2?1717885802370) format("woff2"),url(./fonts/iconly.woff?1717885802370) format("woff"),url(./fonts/iconly.ttf?1717885802370) format("truetype")}[class*=" icons-"],[class=icons],[class^=icons-]{display:inline-block;font-family:"Icons"!important;font-weight:400;font-style:normal;font-variant:normal;text-rendering:auto;line-height:1;-moz-osx-font-smoothing:grayscale;-webkit-font-smoothing:antialiased}.icons-plus:before{content:"\e000"}.icons-minus:before{content:"\e001"}.icons-unlocked:before{content:"\e002"}.icons-locked:before{content:"\e003"}.icons-wifi-strength-1:before{content:"\e004"}.icons-wifi-strength-0:before{content:"\e005"}.icons-wifi-strength-2:before{content:"\e006"}.icons-wifi-strength-3:before{content:"\e008"}.icons-down:before{content:"\e009"}.icons-wifi-strength-4:before{content:"\e00a"}.icons-up:before{content:"\e00c"}

src_data/static/app.js

@@ -1,4 +1,4 @@
-function setupForm(formSelector, onResultCallback = null) {
+function setupForm(formSelector, onResultCallback = null, noCastItems = []) {
   const form = document.querySelector(formSelector);
   if (!form) {
     return;
@@ -68,7 +68,7 @@ function setupForm(formSelector, onResultCallback = null) {
         headers: {
           'Content-Type': 'application/json'
         },
-        body: form2json(fd)
+        body: form2json(fd, noCastItems)
       });
 
       if (!response.ok) {
@@ -139,7 +139,7 @@ function setupNetworkScanForm(formSelector, tableSelector) {
         row.classList.add("network");
         row.setAttribute('data-ssid', result[i].hidden ? '' : result[i].ssid);
         row.onclick = function () {
-          const input = document.querySelector('input.sta-ssid');
+          const input = document.querySelector('input#sta-ssid');
           const ssid = this.getAttribute('data-ssid');
           if (!input || !ssid) {
             return;
@@ -150,19 +150,56 @@ function setupNetworkScanForm(formSelector, tableSelector) {
         };
 
         row.insertCell().textContent = "#" + (i + 1);
-        row.insertCell().innerHTML = result[i].hidden ? '<i>Hidden</i>' : result[i].ssid;
+        row.insertCell().innerHTML = result[i].hidden ? ("<i>" + result[i].bssid + "</i>") : result[i].ssid;
 
-        const signalCell = row.insertCell();
+        // info cell
-        const signalElement = document.createElement("kbd");
+        let infoCell = row.insertCell();
-        signalElement.textContent = result[i].signalQuality + "%";
+
-        if (result[i].signalQuality > 60) {
+        // signal quality
-          signalElement.classList.add('greatSignal');
+        let signalQualityIcon = document.createElement("i");
+        if (result[i].signalQuality > 80) {
+          signalQualityIcon.classList.add('icons-wifi-strength-4');
+        } else if (result[i].signalQuality > 60) {
+          signalQualityIcon.classList.add('icons-wifi-strength-3');
         } else if (result[i].signalQuality > 40) {
-          signalElement.classList.add('normalSignal');
+          signalQualityIcon.classList.add('icons-wifi-strength-2');
+        } else if (result[i].signalQuality > 20) {
+          signalQualityIcon.classList.add('icons-wifi-strength-1');
         } else {
-          signalElement.classList.add('badSignal');
+          signalQualityIcon.classList.add('icons-wifi-strength-0');
         }
-        signalCell.appendChild(signalElement);
+        
+        let signalQualityContainer = document.createElement("span");
+        signalQualityContainer.setAttribute('data-tooltip', result[i].signalQuality + "%");
+        signalQualityContainer.appendChild(signalQualityIcon);
+        infoCell.appendChild(signalQualityContainer);
+
+        // auth
+        const authList = {
+          0: "Open",
+          1: "WEP",
+          2: "WPA",
+          3: "WPA2",
+          4: "WPA/WPA2",
+          5: "WPA/WPA2 Enterprise",
+          6: "WPA3",
+          7: "WPA2/WPA3",
+          8: "WAPI",
+          9: "OWE",
+          10: "WPA3 Enterprise"
+        };
+        let authIcon = document.createElement("i");
+
+        if (result[i].auth == 0) {
+          authIcon.classList.add('icons-unlocked');
+        } else {
+          authIcon.classList.add('icons-locked');
+        }
+
+        let authContainer = document.createElement("span");
+        authContainer.setAttribute('data-tooltip', (result[i].auth in authList) ? authList[result[i].auth] : "unknown");
+        authContainer.appendChild(authIcon);
+        infoCell.appendChild(authContainer);
       }
 
       if (button) {
@@ -598,16 +635,20 @@ function memberIdToVendor(memberId) {
     : "unknown vendor";
 }
 
-function form2json(data) {
+function form2json(data, noCastItems = []) {
   let method = function (object, pair) {
     let keys = pair[0].replace(/\]/g, '').split('[');
     let key = keys[0];
     let value = pair[1];
+
+    if (!noCastItems.includes(keys.join('.'))) {
       if (value === 'true' || value === 'false') {
         value = value === 'true';
+
       } else if (typeof (value) === 'string' && value.trim() !== '' && !isNaN(value)) {
         value = parseFloat(value);
       }
+    }
 
     if (keys.length > 1) {
       let i, x, segment;

tools/build.py

@@ -25,6 +25,9 @@ def before_buildfs(source, target, env):
           dst_name = name + ".gz"
           dst_path = os.path.join(dst, os.path.relpath(root, src), dst_name)
 
+          if os.path.exists(os.path.join(dst, os.path.relpath(root, src))) == False:
+            os.mkdir(os.path.join(dst, os.path.relpath(root, src)))
+
           with gzip.open(dst_path, 'wb', 9) as f_out:
             shutil.copyfileobj(f_in, f_out)