chore: bump version

feat: added fault state GPIO setting
fix: outdoor sensor GPIO validation fixed
2025-12-11 18:54:28 +05:00 · 2024-05-26 17:41:12 +03:00 · 2024-05-25 02:51:10 +03:00 · 2024-05-25 00:17:55 +03:00 · 2024-04-25 13:38:03 +03:00 · 2024-04-23 10:30:42 +03:00
17 changed files with 915 additions and 745 deletions
--- a/README.md
+++ b/README.md
@@ -31,7 +31,6 @@
  - The current temperature of the heat carrier (usually the return heat carrier)
  - Set heat carrier temperature (depending on the selected mode)
  - Current hot water temperature
- Auto tuning of PID and Equitherm parameters *(in development)*
 - [Home Assistant](https://www.home-assistant.io/) integration via MQTT. The ability to create any automation for the boiler!

 ![logo](/assets/ha.png)
--- a/lib/CustomOpenTherm/CustomOpenTherm.h
+++ b/lib/CustomOpenTherm/CustomOpenTherm.h
@@ -126,6 +126,36 @@ public:
    return isValidResponse(response);
  }

+  bool setRoomSetpoint(float temperature) {
+    unsigned long response = this->sendRequest(buildRequest(
+      OpenThermMessageType::WRITE_DATA,
+      OpenThermMessageID::TrSet,
+      temperatureToData(temperature)
+    ));
+
+    return isValidResponse(response);
+  }
+
+  bool setRoomSetpointCh2(float temperature) {
+    unsigned long response = this->sendRequest(buildRequest(
+      OpenThermMessageType::WRITE_DATA,
+      OpenThermMessageID::TrSetCH2,
+      temperatureToData(temperature)
+    ));
+
+    return isValidResponse(response);
+  }
+
+  bool setRoomTemp(float temperature) {
+    unsigned long response = this->sendRequest(buildRequest(
+      OpenThermMessageType::WRITE_DATA,
+      OpenThermMessageID::Tr,
+      temperatureToData(temperature)
+    ));
+
+    return isValidResponse(response);
+  }
+
  bool sendBoilerReset() {
    unsigned int data = 1;
    data <<= 8;
--- a/platformio.ini
+++ b/platformio.ini
@@ -27,6 +27,7 @@ lib_deps =
 	laxilef/TinyLogger@^1.1.0
 build_flags = 
 	-D PIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY
+	;-D PIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
 	-D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
 	-mtext-section-literals
 	-D MQTT_CLIENT_STD_FUNCTION_CALLBACK=1
@@ -51,7 +52,7 @@ monitor_speed = 115200
 monitor_filters = direct
 board_build.flash_mode = dio
 board_build.filesystem = littlefs
-version = 1.4.0-rc.22
+version = 1.4.0

 ; Defaults
 [esp8266_defaults]
@@ -67,6 +68,8 @@ board_build.ldscript = eagle.flash.4m1m.ld

 [esp32_defaults]
 platform = espressif32@^6.6
+platform_packages =
+  platformio/framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32/archive/refs/tags/2.0.15.zip
 board_build.partitions = esp32_partitions.csv
 lib_deps =
 	${env.lib_deps}
@@ -131,13 +134,18 @@ build_flags =

 [env:s2_mini]
 platform = ${esp32_defaults.platform}
+platform_packages = ${esp32_defaults.platform_packages}
 board = lolin_s2_mini
 board_build.partitions = ${esp32_defaults.board_build.partitions}
 lib_deps = ${esp32_defaults.lib_deps}
 lib_ignore = ${esp32_defaults.lib_ignore}
 extra_scripts = ${esp32_defaults.extra_scripts}
+build_unflags =
+	-DARDUINO_USB_MODE=1
 build_flags = 
 	${esp32_defaults.build_flags}
+	-D ARDUINO_USB_MODE=0
+	-D ARDUINO_USB_CDC_ON_BOOT=1
 	-D DEFAULT_OT_IN_GPIO=33
 	-D DEFAULT_OT_OUT_GPIO=35
 	-D DEFAULT_SENSOR_OUTDOOR_GPIO=9
@@ -147,6 +155,7 @@ build_flags =

 [env:s3_mini] 
 platform = ${esp32_defaults.platform}
+platform_packages = ${esp32_defaults.platform_packages}
 board = lolin_s3_mini
 board_build.partitions = ${esp32_defaults.board_build.partitions}
 lib_deps = 
@@ -154,8 +163,12 @@ lib_deps =
 	h2zero/NimBLE-Arduino@^1.4.1
 lib_ignore = ${esp32_defaults.lib_ignore}
 extra_scripts = ${esp32_defaults.extra_scripts}
+build_unflags =
+	-DARDUINO_USB_MODE=1
 build_flags = 
 	${esp32_defaults.build_flags}
+	-D ARDUINO_USB_MODE=0
+	-D ARDUINO_USB_CDC_ON_BOOT=1
 	-D USE_BLE=1
 	-D DEFAULT_OT_IN_GPIO=35
 	-D DEFAULT_OT_OUT_GPIO=36
@@ -166,6 +179,8 @@ build_flags =

 [env:c3_mini] 
 platform = ${esp32_defaults.platform}
+platform_packages =
+    platformio/framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32/archive/refs/tags/2.0.15.zip
 board = lolin_c3_mini
 board_build.partitions = ${esp32_defaults.board_build.partitions}
 lib_deps = 
@@ -187,6 +202,7 @@ build_flags =

 [env:nodemcu_32s]
 platform = ${esp32_defaults.platform}
+platform_packages = ${esp32_defaults.platform_packages}
 board = nodemcu-32s
 board_build.partitions = ${esp32_defaults.board_build.partitions}
 lib_deps = 
@@ -207,6 +223,7 @@ build_flags =

 [env:d1_mini32]
 platform = ${esp32_defaults.platform}
+platform_packages = ${esp32_defaults.platform_packages}
 board = wemos_d1_mini32
 board_build.partitions = ${esp32_defaults.board_build.partitions}
 lib_deps = 
--- a/src/HaHelper.h
+++ b/src/HaHelper.h
@@ -6,107 +6,6 @@ public:
  static const byte TEMP_SOURCE_HEATING = 0;
  static const byte TEMP_SOURCE_INDOOR = 1;

-  bool publishSwitchEmergency(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getObjectId(F("emergency"));
-    doc[FPSTR(HA_OBJECT_ID)] = this->getObjectId(F("emergency"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = F("config");
-    doc[FPSTR(HA_NAME)] = F("Use emergency");
-    doc[FPSTR(HA_ICON)] = F("mdi:sun-snowflake-variant");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_STATE_ON)] = true;
-    doc[FPSTR(HA_STATE_OFF)] = false;
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.emergency.enable }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
-    doc[FPSTR(HA_PAYLOAD_ON)] = F("{\"emergency\": {\"enable\" : true}}");
-    doc[FPSTR(HA_PAYLOAD_OFF)] = F("{\"emergency\": {\"enable\" : false}}");
-    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
-    doc.shrinkToFit();
-
-    return this->publish(this->getTopic(FPSTR(HA_ENTITY_SWITCH), F("emergency")).c_str(), doc);
-  }
-
-  bool publishNumberEmergencyTarget(UnitSystem unit = UnitSystem::METRIC, bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getObjectId(F("emergency_target"));
-    doc[FPSTR(HA_OBJECT_ID)] = this->getObjectId(F("emergency_target"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = F("config");
-    doc[FPSTR(HA_DEVICE_CLASS)] = F("temperature");
-
-    if (unit == UnitSystem::METRIC) {
-      doc[FPSTR(HA_UNIT_OF_MEASUREMENT)] = FPSTR(HA_UNIT_OF_MEASUREMENT_C);
-      doc[FPSTR(HA_MIN)] = 5;
-      doc[FPSTR(HA_MAX)] = 50;
-
-    } else if (unit == UnitSystem::IMPERIAL) {
-      doc[FPSTR(HA_UNIT_OF_MEASUREMENT)] = FPSTR(HA_UNIT_OF_MEASUREMENT_F);
-      doc[FPSTR(HA_MIN)] = 41;
-      doc[FPSTR(HA_MAX)] = 122;
-    }
-    
-    doc[FPSTR(HA_NAME)] = F("Emergency target temp");
-    doc[FPSTR(HA_ICON)] = F("mdi:thermometer-alert");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.emergency.target|float(0)|round(1) }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"emergency\": {\"target\" : {{ value }}}}");
-    doc[FPSTR(HA_STEP)] = 0.5;
-    doc[FPSTR(HA_MODE)] = "box";
-    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
-    doc.shrinkToFit();
-
-    return this->publish(this->getTopic(FPSTR(HA_ENTITY_NUMBER), F("emergency_target")).c_str(), doc);
-  }
-
-  bool publishSwitchEmergencyUseEquitherm(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_VALUE_TEMPLATE)] = F("{{ iif(value_json.sensors.outdoor.type != 1, 'online', 'offline') }}");
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getObjectId(F("emergency_use_equitherm"));
-    doc[FPSTR(HA_OBJECT_ID)] = this->getObjectId(F("emergency_use_equitherm"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = F("config");
-    doc[FPSTR(HA_NAME)] = F("Use equitherm in emergency");
-    doc[FPSTR(HA_ICON)] = F("mdi:snowflake-alert");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_STATE_ON)] = true;
-    doc[FPSTR(HA_STATE_OFF)] = false;
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.emergency.useEquitherm }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
-    doc[FPSTR(HA_PAYLOAD_ON)] = F("{\"emergency\": {\"useEquitherm\" : true}}");
-    doc[FPSTR(HA_PAYLOAD_OFF)] = F("{\"emergency\": {\"useEquitherm\" : false}}");
-    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
-    doc.shrinkToFit();
-
-    return this->publish(this->getTopic(FPSTR(HA_ENTITY_SWITCH), F("emergency_use_equitherm")).c_str(), doc);
-  }
-
-  bool publishSwitchEmergencyUsePid(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_VALUE_TEMPLATE)] = F("{{ iif(value_json.sensors.indoor.type != 1, 'online', 'offline') }}");
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getObjectId(F("emergency_use_pid"));
-    doc[FPSTR(HA_OBJECT_ID)] = this->getObjectId(F("emergency_use_pid"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = F("config");
-    doc[FPSTR(HA_NAME)] = F("Use PID in emergency");
-    doc[FPSTR(HA_ICON)] = F("mdi:snowflake-alert");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_STATE_ON)] = true;
-    doc[FPSTR(HA_STATE_OFF)] = false;
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.emergency.usePid }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
-    doc[FPSTR(HA_PAYLOAD_ON)] = F("{\"emergency\": {\"usePid\" : true}}");
-    doc[FPSTR(HA_PAYLOAD_OFF)] = F("{\"emergency\": {\"usePid\" : false}}");
-    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
-    doc.shrinkToFit();
-
-    return this->publish(this->getTopic(FPSTR(HA_ENTITY_SWITCH), F("emergency_use_pid")).c_str(), doc);
-  }
-
-
  bool publishSwitchHeating(bool enabledByDefault = true) {
    JsonDocument doc;
    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->getDeviceTopic(F("status"));
@@ -175,7 +74,7 @@ public:
    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"heating\": {\"target\" : {{ value }}}}");
    doc[FPSTR(HA_MIN)] = minTemp;
    doc[FPSTR(HA_MAX)] = maxTemp;
-    doc[FPSTR(HA_STEP)] = 0.5;
+    doc[FPSTR(HA_STEP)] = 0.5f;
    doc[FPSTR(HA_MODE)] = "box";
    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
    doc.shrinkToFit();
@@ -206,7 +105,7 @@ public:
    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"heating\": {\"hysteresis\" : {{ value }}}}");
    doc[FPSTR(HA_MIN)] = 0;
    doc[FPSTR(HA_MAX)] = 5;
-    doc[FPSTR(HA_STEP)] = 0.1;
+    doc[FPSTR(HA_STEP)] = 0.1f;
    doc[FPSTR(HA_MODE)] = "box";
    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
    doc.shrinkToFit();
@@ -234,7 +133,7 @@ public:
    doc[FPSTR(HA_NAME)] = F("Heating setpoint");
    doc[FPSTR(HA_ICON)] = F("mdi:coolant-temperature");
    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("state"));
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.parameters.heatingSetpoint|int(0) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.parameters.heatingSetpoint|float(0)|round(1) }}");
    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
    doc.shrinkToFit();

@@ -433,7 +332,7 @@ public:
    doc[FPSTR(HA_NAME)] = F("DHW target");
    doc[FPSTR(HA_ICON)] = F("mdi:water-pump");
    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.dhw.target|int(0) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.dhw.target|float(0)|round(1) }}");
    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"dhw\": {\"target\" : {{ value|int(0) }}}}");
    doc[FPSTR(HA_MIN)] = minTemp;
@@ -605,9 +504,9 @@ public:
    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.pid.p_factor|float(0)|round(3) }}");
    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"pid\": {\"p_factor\" : {{ value }}}}");
-    doc[FPSTR(HA_MIN)] = 0.1;
+    doc[FPSTR(HA_MIN)] = 0.1f;
    doc[FPSTR(HA_MAX)] = 1000;
-    doc[FPSTR(HA_STEP)] = 0.1;
+    doc[FPSTR(HA_STEP)] = 0.1f;
    doc[FPSTR(HA_MODE)] = "box";
    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
    doc.shrinkToFit();
@@ -623,12 +522,12 @@ public:
    doc[FPSTR(HA_NAME)] = F("PID factor I");
    doc[FPSTR(HA_ICON)] = F("mdi:alpha-i-circle-outline");
    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.pid.i_factor|float(0)|round(3) }}");
+    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.pid.i_factor|float(0)|round(4) }}");
    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"pid\": {\"i_factor\" : {{ value }}}}");
    doc[FPSTR(HA_MIN)] = 0;
    doc[FPSTR(HA_MAX)] = 100;
-    doc[FPSTR(HA_STEP)] = 0.001;
+    doc[FPSTR(HA_STEP)] = 0.001f;
    doc[FPSTR(HA_MODE)] = "box";
    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
    doc.shrinkToFit();
@@ -779,9 +678,9 @@ public:
    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.equitherm.n_factor|float(0)|round(3) }}");
    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("settings/set"));
    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"n_factor\" : {{ value }}}}");
-    doc[FPSTR(HA_MIN)] = 0.001;
+    doc[FPSTR(HA_MIN)] = 0.001f;
    doc[FPSTR(HA_MAX)] = 10;
-    doc[FPSTR(HA_STEP)] = 0.001;
+    doc[FPSTR(HA_STEP)] = 0.001f;
    doc[FPSTR(HA_MODE)] = "box";
    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
    doc.shrinkToFit();
@@ -802,7 +701,7 @@ public:
    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"k_factor\" : {{ value }}}}");
    doc[FPSTR(HA_MIN)] = 0;
    doc[FPSTR(HA_MAX)] = 10;
-    doc[FPSTR(HA_STEP)] = 0.01;
+    doc[FPSTR(HA_STEP)] = 0.01f;
    doc[FPSTR(HA_MODE)] = "box";
    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
    doc.shrinkToFit();
@@ -825,7 +724,7 @@ public:
    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"equitherm\": {\"t_factor\" : {{ value }}}}");
    doc[FPSTR(HA_MIN)] = 0;
    doc[FPSTR(HA_MAX)] = 10;
-    doc[FPSTR(HA_STEP)] = 0.01;
+    doc[FPSTR(HA_STEP)] = 0.01f;
    doc[FPSTR(HA_MODE)] = "box";
    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
    doc.shrinkToFit();
@@ -834,48 +733,6 @@ public:
  }


-  bool publishSwitchTuning(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getObjectId(F("tuning"));
-    doc[FPSTR(HA_OBJECT_ID)] = this->getObjectId(F("tuning"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = F("config");
-    doc[FPSTR(HA_NAME)] = F("Tuning");
-    doc[FPSTR(HA_ICON)] = F("mdi:tune-vertical");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("state"));
-    doc[FPSTR(HA_STATE_ON)] = true;
-    doc[FPSTR(HA_STATE_OFF)] = false;
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.tuning.enable }}");
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("state/set"));
-    doc[FPSTR(HA_PAYLOAD_ON)] = F("{\"tuning\": {\"enable\" : true}}");
-    doc[FPSTR(HA_PAYLOAD_OFF)] = F("{\"tuning\": {\"enable\" : false}}");
-    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
-    doc.shrinkToFit();
-
-    return this->publish(this->getTopic(FPSTR(HA_ENTITY_SWITCH), F("tuning")).c_str(), doc);
-  }
-
-  bool publishSelectTuningRegulator(bool enabledByDefault = true) {
-    JsonDocument doc;
-    doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->getDeviceTopic(F("status"));
-    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("state/set"));
-    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"tuning\": {\"regulator\": {% if value == 'Equitherm' %}0{% elif value == 'PID' %}1{% endif %}}}");
-    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
-    doc[FPSTR(HA_UNIQUE_ID)] = this->getObjectId(F("tuning_regulator"));
-    doc[FPSTR(HA_OBJECT_ID)] = this->getObjectId(F("tuning_regulator"));
-    doc[FPSTR(HA_ENTITY_CATEGORY)] = F("config");
-    doc[FPSTR(HA_NAME)] = F("Tuning regulator");
-    doc[FPSTR(HA_STATE_TOPIC)] = this->getDeviceTopic(F("state"));
-    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{% if value_json.tuning.regulator == 0 %}Equitherm{% elif value_json.tuning.regulator == 1 %}PID{% endif %}");
-    doc[FPSTR(HA_OPTIONS)][0] = F("Equitherm");
-    doc[FPSTR(HA_OPTIONS)][1] = F("PID");
-    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
-    doc.shrinkToFit();
-
-    return this->publish(this->getTopic(FPSTR(HA_ENTITY_SELECT), F("tuning_regulator")).c_str(), doc);
-  }
-
-
  bool publishBinSensorStatus(bool enabledByDefault = true) {
    JsonDocument doc;
    doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
@@ -1184,7 +1041,7 @@ public:
    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.temperatures.indoor|float(0)|round(1) }}");
    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("state/set"));
    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"temperatures\": {\"indoor\":{{ value }}}}");
-    doc[FPSTR(HA_STEP)] = 0.01;
+    doc[FPSTR(HA_STEP)] = 0.01f;
    doc[FPSTR(HA_MODE)] = "box";
    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
    doc.shrinkToFit();
@@ -1243,7 +1100,7 @@ public:
    doc[FPSTR(HA_VALUE_TEMPLATE)] = F("{{ value_json.temperatures.outdoor|float(0)|round(1) }}");
    doc[FPSTR(HA_COMMAND_TOPIC)] = this->getDeviceTopic(F("state/set"));
    doc[FPSTR(HA_COMMAND_TEMPLATE)] = F("{\"temperatures\": {\"outdoor\":{{ value }}}}");
-    doc[FPSTR(HA_STEP)] = 0.01;
+    doc[FPSTR(HA_STEP)] = 0.01f;
    doc[FPSTR(HA_MODE)] = "box";
    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
    doc.shrinkToFit();
@@ -1452,7 +1309,7 @@ public:

    doc[FPSTR(HA_MIN_TEMP)] = minTemp;
    doc[FPSTR(HA_MAX_TEMP)] = maxTemp;
-    doc[FPSTR(HA_TEMP_STEP)] = 0.5;
+    doc[FPSTR(HA_TEMP_STEP)] = 0.5f;
    doc[FPSTR(HA_EXPIRE_AFTER)] = 120;
    doc.shrinkToFit();

@@ -1475,7 +1332,7 @@ public:
    doc[FPSTR(HA_TEMPERATURE_COMMAND_TEMPLATE)] = F("{\"dhw\": {\"target\" : {{ value|int(0) }}}}");

    doc[FPSTR(HA_TEMPERATURE_STATE_TOPIC)] = this->getDeviceTopic(F("settings"));
-    doc[FPSTR(HA_TEMPERATURE_STATE_TEMPLATE)] = F("{{ value_json.dhw.target|int(0) }}");
+    doc[FPSTR(HA_TEMPERATURE_STATE_TEMPLATE)] = F("{{ value_json.dhw.target|float(0)|round(1) }}");

    if (unit == UnitSystem::METRIC) {
      doc[FPSTR(HA_TEMPERATURE_UNIT)] = "C";
--- a/src/MqttTask.h
+++ b/src/MqttTask.h
@@ -53,16 +53,25 @@ public:
    Log.sinfoln(FPSTR(L_MQTT), F("Enabled"));
  }

-  bool isConnected() {
+  inline bool isConnected() {
    return this->connected;
  }

+  inline void resetPublishedSettingsTime() {
+    this->prevPubSettingsTime = 0;
+  }
+
+  inline void resetPublishedVarsTime() {
+    this->prevPubVarsTime = 0;
+  }
+
 protected:
  MqttWiFiClient* wifiClient = nullptr;
  MqttClient* client = nullptr;
  HaHelper* haHelper = nullptr;
  MqttWriter* writer = nullptr;
  UnitSystem currentUnitSystem = UnitSystem::METRIC;
+  bool currentHomeAssistantDiscovery = false;
  unsigned short readyForSendTime = 15000;
  unsigned long lastReconnectTime = 0;
  unsigned long connectedTime = 0;
@@ -84,7 +93,7 @@ protected:
    return 2;
  }

-  bool isReadyForSend() {
+  inline bool isReadyForSend() {
    return millis() - this->connectedTime > this->readyForSendTime;
  }

@@ -227,16 +236,25 @@ protected:
    }

    // publish ha entities if not published
-    if (this->newConnection || this->currentUnitSystem != settings.system.unitSystem) {
+    if (settings.mqtt.homeAssistantDiscovery) {
+      if (this->newConnection || !this->currentHomeAssistantDiscovery || this->currentUnitSystem != settings.system.unitSystem) {
        this->publishHaEntities();
        this->publishNonStaticHaEntities(true);
-      this->newConnection = false;
+        this->currentHomeAssistantDiscovery = true;
        this->currentUnitSystem = settings.system.unitSystem;

      } else {
        // publish non static ha entities
        this->publishNonStaticHaEntities();
      }
+
+    } else if (this->currentHomeAssistantDiscovery) {
+      this->currentHomeAssistantDiscovery = false;
+    }
+
+    if (this->newConnection) {
+      this->newConnection = false;
+    }
  }

  void onConnect() {
@@ -291,52 +309,26 @@ protected:
      Log.swarningln(FPSTR(L_MQTT_MSG), F("Not valid json"));
      return;
    }
+    doc.shrinkToFit();

    if (this->haHelper->getDeviceTopic("state/set").equals(topic)) {
      this->writer->publish(this->haHelper->getDeviceTopic("state/set").c_str(), nullptr, 0, true);
-      this->updateVariables(doc);
+      
+      if (jsonToVars(doc, vars)) {
+        this->resetPublishedVarsTime();
+      }

    } else if (this->haHelper->getDeviceTopic("settings/set").equals(topic)) {
      this->writer->publish(this->haHelper->getDeviceTopic("settings/set").c_str(), nullptr, 0, true);
-      this->updateSettings(doc);
-    }
-  }
      
-
-  bool updateSettings(JsonDocument& doc) {
-    bool changed = safeJsonToSettings(doc, settings);
-    doc.clear();
-    doc.shrinkToFit();
-
-    if (changed) {
-      this->prevPubSettingsTime = 0;
+      if (safeJsonToSettings(doc, settings)) {
+        this->resetPublishedSettingsTime();
        fsSettings.update();
-      return true;
      }
-
-    return false;
    }
-
-  bool updateVariables(JsonDocument& doc) {
-    bool changed = jsonToVars(doc, vars);
-    doc.clear();
-    doc.shrinkToFit();
-
-    if (changed) {
-      this->prevPubVarsTime = 0;
-      return true;
-    }
-
-    return false;
  }

  void publishHaEntities() {
-    // emergency
-    this->haHelper->publishSwitchEmergency();
-    this->haHelper->publishNumberEmergencyTarget(settings.system.unitSystem);
-    this->haHelper->publishSwitchEmergencyUseEquitherm();
-    this->haHelper->publishSwitchEmergencyUsePid();
-
    // heating
    this->haHelper->publishSwitchHeating(false);
    this->haHelper->publishSwitchHeatingTurbo();
@@ -363,10 +355,6 @@ protected:
    this->haHelper->publishNumberEquithermFactorK();
    this->haHelper->publishNumberEquithermFactorT();

-    // tuning
-    this->haHelper->publishSwitchTuning();
-    this->haHelper->publishSelectTuningRegulator();
-
    // states
    this->haHelper->publishBinSensorStatus();
    this->haHelper->publishBinSensorOtStatus();
@@ -396,26 +384,22 @@ protected:

  bool publishNonStaticHaEntities(bool force = false) {
    static byte _heatingMinTemp, _heatingMaxTemp, _dhwMinTemp, _dhwMaxTemp = 0;
-    static bool _isStupidMode, _editableOutdoorTemp, _editableIndoorTemp, _dhwPresent = false;
+    static bool _noRegulators, _editableOutdoorTemp, _editableIndoorTemp, _dhwPresent = false;

    bool published = false;
-    bool isStupidMode = !settings.pid.enable && !settings.equitherm.enable;
+    bool noRegulators = !settings.opentherm.nativeHeatingControl && !settings.pid.enable && !settings.equitherm.enable;
    byte heatingMinTemp = 0;
    byte heatingMaxTemp = 0;
    bool editableOutdoorTemp = settings.sensors.outdoor.type == SensorType::MANUAL;
    bool editableIndoorTemp = settings.sensors.indoor.type == SensorType::MANUAL;

-    if (isStupidMode) {
+    if (noRegulators) {
      heatingMinTemp = settings.heating.minTemp;
      heatingMaxTemp = settings.heating.maxTemp;

-    } else if (settings.system.unitSystem == UnitSystem::METRIC) {
-      heatingMinTemp = 5;
-      heatingMaxTemp = 30;
-
-    } else if (settings.system.unitSystem == UnitSystem::IMPERIAL) {
-      heatingMinTemp = 41;
-      heatingMaxTemp = 86;
+    } else {
+      heatingMinTemp = convertTemp(THERMOSTAT_INDOOR_MIN_TEMP, UnitSystem::METRIC, settings.system.unitSystem);
+      heatingMaxTemp = convertTemp(THERMOSTAT_INDOOR_MAX_TEMP, UnitSystem::METRIC, settings.system.unitSystem);
    }

    if (force || _dhwPresent != settings.opentherm.dhwPresent) {
@@ -447,32 +431,17 @@ protected:
      published = true;
    }

-    if (force || _heatingMinTemp != heatingMinTemp || _heatingMaxTemp != heatingMaxTemp) {
-      if (settings.heating.target < heatingMinTemp || settings.heating.target > heatingMaxTemp) {
-        settings.heating.target = constrain(settings.heating.target, heatingMinTemp, heatingMaxTemp);
-      }
-
+    if (force || _noRegulators != noRegulators || _heatingMinTemp != heatingMinTemp || _heatingMaxTemp != heatingMaxTemp) {
      _heatingMinTemp = heatingMinTemp;
      _heatingMaxTemp = heatingMaxTemp;
-      _isStupidMode = isStupidMode;
+      _noRegulators = noRegulators;

      this->haHelper->publishNumberHeatingTarget(settings.system.unitSystem, heatingMinTemp, heatingMaxTemp, false);
      this->haHelper->publishClimateHeating(
        settings.system.unitSystem,
        heatingMinTemp,
        heatingMaxTemp,
-        isStupidMode ? HaHelper::TEMP_SOURCE_HEATING : HaHelper::TEMP_SOURCE_INDOOR
-      );
-
-      published = true;
-
-    } else if (_isStupidMode != isStupidMode) {
-      _isStupidMode = isStupidMode;
-      this->haHelper->publishClimateHeating(
-        settings.system.unitSystem,
-        heatingMinTemp,
-        heatingMaxTemp,
-        isStupidMode ? HaHelper::TEMP_SOURCE_HEATING : HaHelper::TEMP_SOURCE_INDOOR
+        noRegulators ? HaHelper::TEMP_SOURCE_HEATING : HaHelper::TEMP_SOURCE_INDOOR
      );

      published = true;
--- a/src/OpenThermTask.h
+++ b/src/OpenThermTask.h
@@ -30,6 +30,8 @@ protected:
  unsigned long dhwSetTempTime = 0;
  unsigned long heatingSetTempTime = 0;
  byte configuredRxLedGpio = GPIO_IS_NOT_CONFIGURED;
+  byte configuredFaultStateGpio = GPIO_IS_NOT_CONFIGURED;
+  bool faultState = false;


  const char* getTaskName() {
@@ -101,7 +103,8 @@ protected:
  }

  void loop() {
-    static byte currentHeatingTemp, currentDhwTemp = 0;
+    static float currentHeatingTemp = 0.0f;
+    static float currentDhwTemp = 0.0f;

    if (this->instanceInGpio != settings.opentherm.inGpio || this->instanceOutGpio != settings.opentherm.outGpio) {
      this->setup();
@@ -115,6 +118,7 @@ protected:
      return;
    }

+    // RX LED GPIO setup
    if (settings.opentherm.rxLedGpio != this->configuredRxLedGpio) {
      if (this->configuredRxLedGpio != GPIO_IS_NOT_CONFIGURED) {
        digitalWrite(this->configuredRxLedGpio, LOW);
@@ -130,6 +134,27 @@ protected:
      }
    }

+    // Fault state setup
+    if (settings.opentherm.faultStateGpio != this->configuredFaultStateGpio) {
+      if (this->configuredFaultStateGpio != GPIO_IS_NOT_CONFIGURED) {
+        digitalWrite(this->configuredFaultStateGpio, LOW);
+      }
+      
+      if (GPIO_IS_VALID(settings.opentherm.faultStateGpio)) {
+        this->configuredFaultStateGpio = settings.opentherm.faultStateGpio;
+        this->faultState = false ^ settings.opentherm.invertFaultState ? HIGH : LOW;
+
+        pinMode(this->configuredFaultStateGpio, OUTPUT);
+        digitalWrite(
+          this->configuredFaultStateGpio,
+          this->faultState
+        );
+
+      } else if (this->configuredFaultStateGpio != GPIO_IS_NOT_CONFIGURED) {
+        this->configuredFaultStateGpio = GPIO_IS_NOT_CONFIGURED;
+      }
+    }
+
    bool heatingEnabled = (vars.states.emergency || settings.heating.enable) && this->pump && this->isReady();
    bool heatingCh2Enabled = settings.opentherm.heatingCh2Enabled;
    if (settings.opentherm.heatingCh1ToCh2) {
@@ -143,7 +168,7 @@ protected:
      heatingEnabled,
      settings.opentherm.dhwPresent && settings.dhw.enable,
      false,
-      false,
+      settings.opentherm.nativeHeatingControl,
      heatingCh2Enabled,
      settings.opentherm.summerWinterMode,
      settings.opentherm.dhwBlocking
@@ -173,6 +198,16 @@ protected:
      vars.states.fault = false;
      vars.states.diagnostic = false;

+      // Force fault state = on
+      if (this->configuredFaultStateGpio != GPIO_IS_NOT_CONFIGURED) {
+        bool fState = true ^ settings.opentherm.invertFaultState ? HIGH : LOW;
+
+        if (fState != this->faultState) {
+          this->faultState = fState;
+          digitalWrite(this->configuredFaultStateGpio, this->faultState);
+        }
+      }
+
      return;
    }

@@ -198,6 +233,16 @@ protected:
    vars.states.fault = CustomOpenTherm::isFault(response);
    vars.states.diagnostic = CustomOpenTherm::isDiagnostic(response);

+    // Fault state
+    if (this->configuredFaultStateGpio != GPIO_IS_NOT_CONFIGURED) {
+      bool fState = vars.states.fault ^ settings.opentherm.invertFaultState ? HIGH : LOW;
+      
+      if (fState != this->faultState) {
+        this->faultState = fState;
+        digitalWrite(this->configuredFaultStateGpio, this->faultState);
+      }
+    }
+
    // These parameters will be updated every minute
    if (millis() - this->prevUpdateNonEssentialVars > 60000) {
      if (!heatingEnabled && settings.opentherm.modulationSyncWithHeating) {
@@ -285,6 +330,9 @@ protected:
      // Get fault code (if necessary)
      if (vars.states.fault) {
        updateFaultCode();
+        
+      } else if (vars.sensors.faultCode != 0) {
+        vars.sensors.faultCode = 0;
      }

      updatePressure();
@@ -351,18 +399,13 @@ protected:


    // Update DHW temp
-    byte newDhwTemp = settings.dhw.target;
-    if (settings.opentherm.dhwPresent && settings.dhw.enable && (this->needSetDhwTemp() || newDhwTemp != currentDhwTemp)) {
-      if (newDhwTemp < settings.dhw.minTemp || newDhwTemp > settings.dhw.maxTemp) {
-        newDhwTemp = constrain(newDhwTemp, settings.dhw.minTemp, settings.dhw.maxTemp);
-      }
-
-      float convertedTemp = convertTemp(newDhwTemp, settings.system.unitSystem, settings.opentherm.unitSystem);
-      Log.sinfoln(FPSTR(L_OT_DHW), F("Set temp: %u (converted: %.2f)"), newDhwTemp, convertedTemp);
+    if (settings.opentherm.dhwPresent && settings.dhw.enable && (this->needSetDhwTemp() || fabs(settings.dhw.target - currentDhwTemp) > 0.0001f)) {
+      float convertedTemp = convertTemp(settings.dhw.target, settings.system.unitSystem, settings.opentherm.unitSystem);
+      Log.sinfoln(FPSTR(L_OT_DHW), F("Set temp: %.2f (converted: %.2f)"), settings.dhw.target, convertedTemp);

      // Set DHW temp
      if (this->instance->setDhwTemp(convertedTemp)) {
-        currentDhwTemp = newDhwTemp;
+        currentDhwTemp = settings.dhw.target;
        this->dhwSetTempTime = millis();

      } else {
@@ -372,30 +415,82 @@ protected:
      // Set DHW temp to CH2
      if (settings.opentherm.dhwToCh2) {
        if (!this->instance->setHeatingCh2Temp(convertedTemp)) {
-          Log.swarningln(FPSTR(L_OT_DHW), F("Failed set ch2 temp"));
+          Log.swarningln(FPSTR(L_OT_DHW), F("Failed set CH2 temp"));
        }
      }
    }


-    // Update heating temp
-    if (heatingEnabled && (this->needSetHeatingTemp() || fabs(vars.parameters.heatingSetpoint - currentHeatingTemp) > 0.0001)) {
-      float convertedTemp = convertTemp(vars.parameters.heatingSetpoint, settings.system.unitSystem, settings.opentherm.unitSystem);
-      Log.sinfoln(FPSTR(L_OT_HEATING), F("Set temp: %u (converted: %.2f)"), vars.parameters.heatingSetpoint, convertedTemp);
+    // Native heating control
+    if (settings.opentherm.nativeHeatingControl) {
+      // Set current indoor temp
+      float indoorTemp = 0.0f;
+      float convertedTemp = 0.0f;

-      // Set heating temp
-      if (this->instance->setHeatingCh1Temp(convertedTemp) || this->setMaxHeatingTemp(convertedTemp)) {
+      if (!vars.states.emergency || settings.sensors.indoor.type != SensorType::MANUAL) {
+        indoorTemp = vars.temperatures.indoor;
+        convertedTemp = convertTemp(indoorTemp, settings.system.unitSystem, settings.opentherm.unitSystem);
+      }
+
+      Log.sinfoln(FPSTR(L_OT_HEATING), F("Set current indoor temp: %.2f (converted: %.2f)"), indoorTemp, convertedTemp);
+      if (!this->instance->setRoomTemp(convertedTemp)) {
+        Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set current indoor temp"));
+      }
+
+      // Set target indoor temp
+      if (this->needSetHeatingTemp() || fabs(vars.parameters.heatingSetpoint - currentHeatingTemp) > 0.0001f) {
+        convertedTemp = convertTemp(vars.parameters.heatingSetpoint, settings.system.unitSystem, settings.opentherm.unitSystem);
+        Log.sinfoln(FPSTR(L_OT_HEATING), F("Set target indoor temp: %.2f (converted: %.2f)"), vars.parameters.heatingSetpoint, convertedTemp);
+
+        if (this->instance->setRoomSetpoint(convertedTemp)) {
          currentHeatingTemp = vars.parameters.heatingSetpoint;
          this->heatingSetTempTime = millis();

        } else {
-        Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set temp"));
+          Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set target indoor temp"));
+        }
+
+        // Set target temp to CH2
+        if (settings.opentherm.heatingCh1ToCh2) {
+          if (!this->instance->setRoomSetpointCh2(convertedTemp)) {
+            Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set target indoor temp to CH2"));
+          }
+        }
+      }
+
+      // force enable pump
+      if (!this->pump) {
+        this->pump = true;
+      }
+
+    } else {
+      // Update heating temp
+      if (heatingEnabled && (this->needSetHeatingTemp() || fabs(vars.parameters.heatingSetpoint - currentHeatingTemp) > 0.0001f)) {
+        float convertedTemp = convertTemp(vars.parameters.heatingSetpoint, settings.system.unitSystem, settings.opentherm.unitSystem);
+        Log.sinfoln(FPSTR(L_OT_HEATING), F("Set temp: %.2f (converted: %.2f)"), vars.parameters.heatingSetpoint, convertedTemp);
+
+        // Set max heating temp
+        if (this->setMaxHeatingTemp(convertedTemp)) {
+          currentHeatingTemp = vars.parameters.heatingSetpoint;
+          this->heatingSetTempTime = millis();
+
+        } else {
+          Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set max heating temp"));
+        }
+
+        // Set heating temp
+        if (this->instance->setHeatingCh1Temp(convertedTemp)) {
+          currentHeatingTemp = vars.parameters.heatingSetpoint;
+          this->heatingSetTempTime = millis();
+
+        } else {
+          Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set CH1 temp"));
        }

        // Set heating temp to CH2
        if (settings.opentherm.heatingCh1ToCh2) {
          if (!this->instance->setHeatingCh2Temp(convertedTemp)) {
-          Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set ch2 temp"));
+            Log.swarningln(FPSTR(L_OT_HEATING), F("Failed set CH2 temp"));
          }
        }
      }
@@ -405,10 +500,10 @@ protected:
      // Only if enabled PID or/and Equitherm
      if (settings.heating.hysteresis > 0 && (!vars.states.emergency || settings.emergency.usePid) && (settings.equitherm.enable || settings.pid.enable)) {
        float halfHyst = settings.heating.hysteresis / 2;
-      if (this->pump && vars.temperatures.indoor - settings.heating.target + 0.0001 >= halfHyst) {
+        if (this->pump && vars.temperatures.indoor - settings.heating.target + 0.0001f >= halfHyst) {
          this->pump = false;

-      } else if (!this->pump && vars.temperatures.indoor - settings.heating.target - 0.0001 <= -(halfHyst)) {
+        } else if (!this->pump && vars.temperatures.indoor - settings.heating.target - 0.0001f <= -(halfHyst)) {
          this->pump = true;
        }

@@ -416,6 +511,7 @@ protected:
        this->pump = true;
      }
    }
+  }

  void initialize() {
    // Not all boilers support these, only try once when the boiler becomes connected
--- a/src/PortalTask.h
+++ b/src/PortalTask.h
@@ -344,7 +344,11 @@ protected:
      auto apCount = WiFi.scanComplete();
      if (apCount <= 0) {
        if (apCount != WIFI_SCAN_RUNNING) {
+          #ifdef ARDUINO_ARCH_ESP8266
          WiFi.scanNetworks(true, true);
+          #else
+          WiFi.scanNetworks(true, true, true);
+          #endif
        }
        
        this->webServer->send(404);
@@ -423,7 +427,9 @@ protected:
      if (changed) {
        doc.clear();
        doc.shrinkToFit();
+
        fsSettings.update();
+        tMqtt->resetPublishedSettingsTime();
      }
    });

@@ -473,6 +479,13 @@ protected:
      doc.shrinkToFit();
      
      this->bufferedWebServer->send(changed ? 201 : 200, "application/json", doc);
+
+      if (changed) {
+        doc.clear();
+        doc.shrinkToFit();
+        
+        tMqtt->resetPublishedVarsTime();
+      }
    });

    this->webServer->on("/api/info", HTTP_GET, [this]() {
@@ -499,6 +512,34 @@ protected:
      doc["system"]["maxFreeBlockHeap"] = getMaxFreeBlockHeap();
      doc["system"]["minMaxFreeBlockHeap"] = getMaxFreeBlockHeap(true);
      doc["system"]["resetReason"] = getResetReason();
+      
+      #ifdef ARDUINO_ARCH_ESP8266
+      doc["system"]["chipModel"] = esp_is_8285() ? "ESP8285" : "ESP8266";
+      doc["system"]["chipRevision"] = 0;
+      doc["system"]["chipCores"] = 1;
+      doc["system"]["cpuFreq"] = ESP.getCpuFreqMHz();
+      doc["system"]["coreVersion"] = ESP.getCoreVersion();
+      doc["system"]["flashSize"] = ESP.getFlashChipSize();
+      doc["system"]["flashRealSize"] = ESP.getFlashChipRealSize();
+      #elif ARDUINO_ARCH_ESP32
+      doc["system"]["chipModel"] = ESP.getChipModel();
+      doc["system"]["chipRevision"] = ESP.getChipRevision();
+      doc["system"]["chipCores"] = ESP.getChipCores();
+      doc["system"]["cpuFreq"] = ESP.getCpuFreqMHz();
+      doc["system"]["coreVersion"] = ESP.getSdkVersion();
+      doc["system"]["flashSize"] = ESP.getFlashChipSize();
+      doc["system"]["flashRealSize"] = doc["system"]["flashSize"];
+      #else
+      doc["system"]["chipModel"] = 0;
+      doc["system"]["chipRevision"] = 0;
+      doc["system"]["chipCores"] = 0;
+      doc["system"]["cpuFreq"] = 0;
+      doc["system"]["coreVersion"] = 0;
+      doc["system"]["flashSize"] = 0;
+      doc["system"]["flashRealSize"] = 0;
+      #endif
+
+
      doc.shrinkToFit();

      this->bufferedWebServer->send(200, "application/json", doc);
--- a/src/RegulatorTask.h
+++ b/src/RegulatorTask.h
@@ -1,10 +1,8 @@
 #include <Equitherm.h>
 #include <GyverPID.h>
-#include <PIDtuner.h>

 Equitherm etRegulator;
 GyverPID pidRegulator(0, 0, 0);
-PIDtuner pidTuner;


 class RegulatorTask : public LeanTask {
@@ -12,9 +10,6 @@ public:
  RegulatorTask(bool _enabled = false, unsigned long _interval = 0) : LeanTask(_enabled, _interval) {}

 protected:
-  bool tunerInit = false;
-  byte tunerState = 0;
-  byte tunerRegulator = 0;
  float prevHeatingTarget = 0;
  float prevEtResult = 0;
  float prevPidResult = 0;
@@ -32,7 +27,7 @@ protected:
  }
  
  void loop() {
-    byte newTemp = vars.parameters.heatingSetpoint;
+    float newTemp = vars.parameters.heatingSetpoint;

    if (vars.states.emergency) {
      if (settings.heating.turbo) {
@@ -41,74 +36,60 @@ protected:
        Log.sinfoln(FPSTR(L_REGULATOR), F("Turbo mode auto disabled"));
      }

-      newTemp = getEmergencyModeTemp();
+      newTemp = this->getEmergencyModeTemp();

    } else {
-      if (vars.tuning.enable || tunerInit) {
-        if (settings.heating.turbo) {
-          settings.heating.turbo = false;
-
-          Log.sinfoln(FPSTR(L_REGULATOR), F("Turbo mode auto disabled"));
-        }
-
-        newTemp = getTuningModeTemp();
-
-        if (newTemp == 0) {
-          vars.tuning.enable = false;
-        }
-      }
-
-      if (!vars.tuning.enable) {
      if (settings.heating.turbo && (fabs(settings.heating.target - vars.temperatures.indoor) < 1 || !settings.heating.enable || (settings.equitherm.enable && settings.pid.enable))) {
        settings.heating.turbo = false;

        Log.sinfoln(FPSTR(L_REGULATOR), F("Turbo mode auto disabled"));
      }

-        newTemp = getNormalModeTemp();
-      }
+      newTemp = this->getNormalModeTemp();
    }

    // Limits
-    if (newTemp < settings.heating.minTemp || newTemp > settings.heating.maxTemp) {
-      newTemp = constrain(newTemp, settings.heating.minTemp, settings.heating.maxTemp);
-    }
+    newTemp = constrain(
+      newTemp,
+      !settings.opentherm.nativeHeatingControl ? settings.heating.minTemp : THERMOSTAT_INDOOR_MIN_TEMP,
+      !settings.opentherm.nativeHeatingControl ? settings.heating.maxTemp : THERMOSTAT_INDOOR_MAX_TEMP
+    );

-    if (abs(vars.parameters.heatingSetpoint - newTemp) + 0.0001 >= 1) {
+    if (fabs(vars.parameters.heatingSetpoint - newTemp) > 0.4999f) {
      vars.parameters.heatingSetpoint = newTemp;
    }
  }


-  byte getEmergencyModeTemp() {
+  float getEmergencyModeTemp() {
    float newTemp = 0;

    // if use equitherm
-    if (settings.emergency.useEquitherm && settings.sensors.outdoor.type != SensorType::MANUAL) {
+    if (settings.emergency.useEquitherm) {
      float etResult = getEquithermTemp(settings.heating.minTemp, settings.heating.maxTemp);

-      if (fabs(prevEtResult - etResult) + 0.0001 >= 0.5) {
+      if (fabs(prevEtResult - etResult) > 0.4999f) {
        prevEtResult = etResult;
        newTemp += etResult;

-        Log.sinfoln(FPSTR(L_REGULATOR_EQUITHERM), F("New emergency result: %hhu (%.2f)"), (uint8_t) round(etResult), etResult);
+        Log.sinfoln(FPSTR(L_REGULATOR_EQUITHERM), F("New emergency result: %.2f"), etResult);

      } else {
        newTemp += prevEtResult;
      }

-    } else if(settings.emergency.usePid && settings.sensors.indoor.type != SensorType::MANUAL) {
+    } else if(settings.emergency.usePid) {
      if (vars.parameters.heatingEnabled) {
        float pidResult = getPidTemp(
          settings.heating.minTemp,
          settings.heating.maxTemp
        );

-        if (fabs(prevPidResult - pidResult) + 0.0001 >= 0.5) {
+        if (fabs(prevPidResult - pidResult) > 0.4999f) {
          prevPidResult = pidResult;
          newTemp += pidResult;

-          Log.sinfoln(FPSTR(L_REGULATOR_PID), F("New emergency result: %hhu (%.2f)"), (uint8_t) round(pidResult), pidResult);
+          Log.sinfoln(FPSTR(L_REGULATOR_PID), F("New emergency result: %.2f"), pidResult);

        } else {
          newTemp += prevPidResult;
@@ -123,17 +104,17 @@ protected:
      newTemp = settings.emergency.target;
    }

-    return round(newTemp);
+    return newTemp;
  }

-  byte getNormalModeTemp() {
+  float getNormalModeTemp() {
    float newTemp = 0;

-    if (fabs(prevHeatingTarget - settings.heating.target) > 0.0001) {
+    if (fabs(prevHeatingTarget - settings.heating.target) > 0.0001f) {
      prevHeatingTarget = settings.heating.target;
      Log.sinfoln(FPSTR(L_REGULATOR), F("New target: %.2f"), settings.heating.target);

-      if (settings.equitherm.enable && settings.pid.enable) {
+      if (/*settings.equitherm.enable && */settings.pid.enable) {
        pidRegulator.integral = 0;
        Log.sinfoln(FPSTR(L_REGULATOR_PID), F("Integral sum has been reset"));
      }
@@ -143,11 +124,11 @@ protected:
    if (settings.equitherm.enable) {
      float etResult = getEquithermTemp(settings.heating.minTemp, settings.heating.maxTemp);

-      if (fabs(prevEtResult - etResult) + 0.0001 >= 0.5) {
+      if (fabs(prevEtResult - etResult) > 0.4999f) {
        prevEtResult = etResult;
        newTemp += etResult;

-        Log.sinfoln(FPSTR(L_REGULATOR_EQUITHERM), F("New result: %hhu (%.2f)"), (uint8_t) round(etResult), etResult);
+        Log.sinfoln(FPSTR(L_REGULATOR_EQUITHERM), F("New result: %.2f"), etResult);

      } else {
        newTemp += prevEtResult;
@@ -162,11 +143,12 @@ protected:
          settings.pid.maxTemp
        );

-        if (fabs(prevPidResult - pidResult) + 0.0001 >= 0.5) {
+        if (fabs(prevPidResult - pidResult) > 0.4999f) {
          prevPidResult = pidResult;
          newTemp += pidResult;

-          Log.sinfoln(FPSTR(L_REGULATOR_PID), F("New result: %hhd (%.2f)"), (int8_t) round(pidResult), pidResult);
+          Log.sinfoln(FPSTR(L_REGULATOR_PID), F("New result: %.2f"), pidResult);
+          Log.straceln(FPSTR(L_REGULATOR_PID), F("Integral: %.2f"), pidRegulator.integral);

        } else {
          newTemp += prevPidResult;
@@ -174,6 +156,10 @@ protected:
      } else {
        newTemp += prevPidResult;
      }
+
+    } else if (fabs(pidRegulator.integral) > 0.0001f) {
+        pidRegulator.integral = 0;
+        Log.sinfoln(FPSTR(L_REGULATOR_PID), F("Integral sum has been reset"));
    }

    // default temp, manual mode
@@ -181,97 +167,9 @@ protected:
      newTemp = settings.heating.target;
    }

-    newTemp = round(newTemp);
    return newTemp;
  }

-  byte getTuningModeTemp() {
-    if (tunerInit && (!vars.tuning.enable || vars.tuning.regulator != tunerRegulator)) {
-      if (tunerRegulator == 0) {
-        pidTuner.reset();
-      }
-
-      tunerInit = false;
-      tunerRegulator = 0;
-      tunerState = 0;
-      Log.sinfoln("REGULATOR.TUNING", F("Stopped"));
-    }
-
-    if (!vars.tuning.enable) {
-      return 0;
-    }
-
-
-    if (vars.tuning.regulator == 0) {
-      // @TODO дописать
-      Log.sinfoln("REGULATOR.TUNING.EQUITHERM", F("Not implemented"));
-      return 0;
-
-    } else if (vars.tuning.regulator == 1) {
-      // PID tuner
-      float defaultTemp = settings.equitherm.enable
-        ? getEquithermTemp(settings.heating.minTemp, settings.heating.maxTemp)
-        : settings.heating.target;
-
-      if (tunerInit && pidTuner.getState() == 3) {
-        Log.sinfoln("REGULATOR.TUNING.PID", F("Finished"));
-        for (Stream* stream : Log.getStreams()) {
-          pidTuner.debugText(stream);
-        }
-
-        pidTuner.reset();
-        tunerInit = false;
-        tunerRegulator = 0;
-        tunerState = 0;
-
-        if (pidTuner.getAccuracy() < 90) {
-          Log.swarningln("REGULATOR.TUNING.PID", F("Bad result, try again..."));
-
-        } else {
-          settings.pid.p_factor = pidTuner.getPID_p();
-          settings.pid.i_factor = pidTuner.getPID_i();
-          settings.pid.d_factor = pidTuner.getPID_d();
-
-          return 0;
-        }
-      }
-
-      if (!tunerInit) {
-        Log.sinfoln("REGULATOR.TUNING.PID", F("Start..."));
-
-        float step;
-        if (vars.temperatures.indoor - vars.temperatures.outdoor > 10) {
-          step = ceil(vars.parameters.heatingSetpoint / vars.temperatures.indoor * 2);
-        } else {
-          step = 5.0f;
-        }
-
-        float startTemp = step;
-        Log.sinfoln("REGULATOR.TUNING.PID", F("Started. Start value: %f, step: %f"), startTemp, step);
-        pidTuner.setParameters(NORMAL, startTemp, step, 20 * 60 * 1000, 0.15, 60 * 1000, 10000);
-        tunerInit = true;
-        tunerRegulator = 1;
-      }
-
-      pidTuner.setInput(vars.temperatures.indoor);
-      pidTuner.compute();
-
-      if (tunerState > 0 && pidTuner.getState() != tunerState) {
-        Log.sinfoln("REGULATOR.TUNING.PID", F("Log:"));
-        for (Stream* stream : Log.getStreams()) {
-          pidTuner.debugText(stream);
-        }
-        
-        tunerState = pidTuner.getState();
-      }
-
-      return round(defaultTemp + pidTuner.getOutput());
-
-    } else {
-      return 0;
-    }
-  }
-
  /**
   * @brief Get the Equitherm Temp
   * Calculations in degrees C, conversion occurs when using F
@@ -294,8 +192,15 @@ protected:
    }

    if (vars.states.emergency) {
+      if (settings.sensors.indoor.type == SensorType::MANUAL) {
        etRegulator.Kt = 0;
        etRegulator.indoorTemp = 0;
+
+      } else {
+        etRegulator.Kt = settings.equitherm.t_factor;
+        etRegulator.indoorTemp = indoorTemp;
+      }
+      
      etRegulator.outdoorTemp = outdoorTemp;

    } else if (settings.pid.enable) {
@@ -327,9 +232,23 @@ protected:
  }

  float getPidTemp(int minTemp, int maxTemp) {
+    if (fabs(pidRegulator.Kp - settings.pid.p_factor) >= 0.0001f) {
      pidRegulator.Kp = settings.pid.p_factor;
+      pidRegulator.integral = 0;
+      Log.sinfoln(FPSTR(L_REGULATOR_PID), F("Integral sum has been reset"));
+    }
+
+    if (fabs(pidRegulator.Ki - settings.pid.i_factor) >= 0.0001f) {
      pidRegulator.Ki = settings.pid.i_factor;
+      pidRegulator.integral = 0;
+      Log.sinfoln(FPSTR(L_REGULATOR_PID), F("Integral sum has been reset"));
+    }
+
+    if (fabs(pidRegulator.Kd - settings.pid.d_factor) >= 0.0001f) {
      pidRegulator.Kd = settings.pid.d_factor;
+      pidRegulator.integral = 0;
+      Log.sinfoln(FPSTR(L_REGULATOR_PID), F("Integral sum has been reset"));
+    }

    pidRegulator.setLimits(minTemp, maxTemp);
    pidRegulator.setDt(settings.pid.dt * 1000u);
@@ -338,32 +257,4 @@ protected:

    return pidRegulator.getResultTimer();
  }
-
-  float tuneEquithermN(float ratio, float currentTemp, float setTemp, unsigned int dirtyInterval = 60, unsigned int accurateInterval = 1800, float accurateStep = 0.01, float accurateStepAfter = 1) {
-    static uint32_t _prevIteration = millis();
-
-    if (abs(currentTemp - setTemp) < accurateStepAfter) {
-      if (millis() - _prevIteration < (accurateInterval * 1000)) {
-        return ratio;
-      }
-
-      if (currentTemp - setTemp > 0.1f) {
-        ratio -= accurateStep;
-
-      } else if (currentTemp - setTemp < -0.1f) {
-        ratio += accurateStep;
-      }
-
-    } else {
-      if (millis() - _prevIteration < (dirtyInterval * 1000)) {
-        return ratio;
-      }
-
-      ratio = ratio * (setTemp / currentTemp);
-    }
-
-    _prevIteration = millis();
-    return ratio;
-  }
-
 };
--- a/src/SensorsTask.h
+++ b/src/SensorsTask.h
@@ -65,7 +65,7 @@ protected:
    bool indoorTempUpdated = false;
    bool outdoorTempUpdated = false;

-    if (settings.sensors.outdoor.type == SensorType::DS18B20 && GPIO_IS_VALID(settings.sensors.indoor.gpio)) {
+    if (settings.sensors.outdoor.type == SensorType::DS18B20 && GPIO_IS_VALID(settings.sensors.outdoor.gpio)) {
      outdoorTemperatureSensor();
      outdoorTempUpdated = true;
    }
@@ -90,7 +90,7 @@ protected:
        newTemp += c2f(this->filteredOutdoorTemp);
      }

-      if (fabs(vars.temperatures.outdoor - newTemp) > 0.099) {
+      if (fabs(vars.temperatures.outdoor - newTemp) > 0.099f) {
        vars.temperatures.outdoor = newTemp;
        Log.sinfoln(FPSTR(L_SENSORS_OUTDOOR), F("New temp: %f"), vars.temperatures.outdoor);
      }
@@ -105,7 +105,7 @@ protected:
        newTemp += c2f(this->filteredIndoorTemp);
      }

-      if (fabs(vars.temperatures.indoor - newTemp) > 0.099) {
+      if (fabs(vars.temperatures.indoor - newTemp) > 0.099f) {
        vars.temperatures.indoor = newTemp;
        Log.sinfoln(FPSTR(L_SENSORS_INDOOR), F("New temp: %f"), vars.temperatures.indoor);
      }
@@ -163,7 +163,7 @@ protected:
            return;
          }

-          float rawTemp = ((pData[0] | (pData[1] << 8)) * 0.01);
+          float rawTemp = ((pData[0] | (pData[1] << 8)) * 0.01f);
          Log.straceln(FPSTR(L_SENSORS_INDOOR), F("Raw temp: %f"), rawTemp);

          if (this->emptyIndoorTemp) {
@@ -235,7 +235,7 @@ protected:
        return;
      }

-      Log.sinfoln(FPSTR(L_SENSORS_OUTDOOR), F("Starting on gpio %hhu..."), settings.sensors.outdoor.gpio);
+      Log.sinfoln(FPSTR(L_SENSORS_OUTDOOR), F("Starting on GPIO %hhu..."), settings.sensors.outdoor.gpio);

      this->oneWireOutdoorSensor->begin(settings.sensors.outdoor.gpio);
      this->oneWireOutdoorSensor->reset();
@@ -307,7 +307,7 @@ protected:
        return;
      }
      
-      Log.sinfoln(FPSTR(L_SENSORS_INDOOR), F("Starting on gpio %hhu..."), settings.sensors.indoor.gpio);
+      Log.sinfoln(FPSTR(L_SENSORS_INDOOR), F("Starting on GPIO %hhu..."), settings.sensors.indoor.gpio);

      this->oneWireIndoorSensor->begin(settings.sensors.indoor.gpio);
      this->oneWireIndoorSensor->reset();
--- a/src/Settings.h
+++ b/src/Settings.h
@@ -51,6 +51,8 @@ struct Settings {
    byte inGpio = DEFAULT_OT_IN_GPIO;
    byte outGpio = DEFAULT_OT_OUT_GPIO;
    byte rxLedGpio = DEFAULT_OT_RX_LED_GPIO;
+    byte faultStateGpio = DEFAULT_OT_FAULT_STATE_GPIO;
+    byte invertFaultState = false;
    unsigned int memberIdCode = 0;
    bool dhwPresent = true;
    bool summerWinterMode = false;
@@ -60,6 +62,7 @@ struct Settings {
    bool dhwBlocking = false;
    bool modulationSyncWithHeating = false;
    bool getMinMaxTemp = true;
+    bool nativeHeatingControl = false;
  } opentherm;

  struct {
@@ -70,11 +73,12 @@ struct Settings {
    char password[33] = DEFAULT_MQTT_PASSWORD;
    char prefix[33] = DEFAULT_MQTT_PREFIX;
    unsigned short interval = 5;
+    bool homeAssistantDiscovery = true;
  } mqtt;

  struct {
    bool enable = true;
-    float target = 40.0f;
+    float target = DEFAULT_HEATING_TARGET_TEMP;
    unsigned short tresholdTime = 120;
    bool useEquitherm = false;
    bool usePid = false;
@@ -85,7 +89,7 @@ struct Settings {
  struct {
    bool enable = true;
    bool turbo = false;
-    float target = 40.0f;
+    float target = DEFAULT_HEATING_TARGET_TEMP;
    float hysteresis = 0.5f;
    byte minTemp = DEFAULT_HEATING_MIN_TEMP;
    byte maxTemp = DEFAULT_HEATING_MAX_TEMP;
@@ -94,16 +98,16 @@ struct Settings {

  struct {
    bool enable = true;
-    byte target = 40;
+    float target = DEFAULT_DHW_TARGET_TEMP;
    byte minTemp = DEFAULT_DHW_MIN_TEMP;
    byte maxTemp = DEFAULT_DHW_MAX_TEMP;
  } dhw;

  struct {
    bool enable = false;
-    float p_factor = 50;
-    float i_factor = 0.006f;
-    float d_factor = 10000;
+    float p_factor = 2;
+    float i_factor = 0.0055f;
+    float d_factor = 0;
    unsigned short dt = 180;
    byte minTemp = 0;
    byte maxTemp = DEFAULT_HEATING_MAX_TEMP;
@@ -143,11 +147,6 @@ struct Settings {
 } settings;

 struct Variables {
-  struct {
-    bool enable = false;
-    byte regulator = 0;
-  } tuning;
-
  struct {
    bool otStatus = false;
    bool emergency = false;
@@ -181,7 +180,7 @@ struct Variables {
    bool heatingEnabled = false;
    byte heatingMinTemp = DEFAULT_HEATING_MIN_TEMP;
    byte heatingMaxTemp = DEFAULT_HEATING_MAX_TEMP;
-    byte heatingSetpoint = 0;
+    float heatingSetpoint = 0;
    unsigned long extPumpLastEnableTime = 0;
    byte dhwMinTemp = DEFAULT_DHW_MIN_TEMP;
    byte dhwMaxTemp = DEFAULT_DHW_MAX_TEMP;
--- a/src/defines.h
+++ b/src/defines.h
@@ -1,5 +1,5 @@
 #define PROJECT_NAME                    "OpenTherm Gateway"
-#define PROJECT_VERSION             "1.4.0-rc.22"
+#define PROJECT_VERSION                 "1.4.0"
 #define PROJECT_REPO                    "https://github.com/Laxilef/OTGateway"

 #define MQTT_RECONNECT_INTERVAL         15000
@@ -9,13 +9,20 @@

 #define CONFIG_URL                      "http://%s/"
 #define SETTINGS_VALID_VALUE            "stvalid" // only 8 chars!
-
 #define GPIO_IS_NOT_CONFIGURED          0xff
+
+#define DEFAULT_HEATING_TARGET_TEMP     40
 #define DEFAULT_HEATING_MIN_TEMP        20
 #define DEFAULT_HEATING_MAX_TEMP        90
+
+#define DEFAULT_DHW_TARGET_TEMP         40
 #define DEFAULT_DHW_MIN_TEMP            30
 #define DEFAULT_DHW_MAX_TEMP            60

+#define THERMOSTAT_INDOOR_DEFAULT_TEMP  20
+#define THERMOSTAT_INDOOR_MIN_TEMP      5
+#define THERMOSTAT_INDOOR_MAX_TEMP      30
+
 #ifndef USE_SERIAL
  #define USE_SERIAL true
 #endif
@@ -96,6 +103,10 @@
  #define DEFAULT_OT_RX_LED_GPIO GPIO_IS_NOT_CONFIGURED
 #endif

+#ifndef DEFAULT_OT_FAULT_STATE_GPIO
+  #define DEFAULT_OT_FAULT_STATE_GPIO GPIO_IS_NOT_CONFIGURED
+#endif
+
 #ifndef DEFAULT_SENSOR_OUTDOOR_GPIO
  #define DEFAULT_SENSOR_OUTDOOR_GPIO GPIO_IS_NOT_CONFIGURED
 #endif
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -59,7 +59,7 @@ void setup() {
    return tm{sec, min, hour};
  });
  
-  Serial.begin(settings.system.serial.baudrate);
+  Serial.begin(115200);
  Log.addStream(&Serial);
  Log.print("\n\n\r");

@@ -110,8 +110,15 @@ void setup() {

  // logs
  if (!settings.system.serial.enable) {
-    Log.clearStreams();
    Serial.end();
+    Log.clearStreams();
+
+  } else if (settings.system.serial.baudrate != 115200) {
+    Serial.end();
+    Log.clearStreams();
+
+    Serial.begin(settings.system.serial.baudrate);
+    Log.addStream(&Serial);
  }

  if (settings.system.telnet.enable) {
--- a/src/utils.h
+++ b/src/utils.h
--- a/src_data/dashboard.html
+++ b/src_data/dashboard.html
@@ -250,7 +250,7 @@
            return;
          }
          
-          newSettings.dhw.target -= 1;
+          newSettings.dhw.target -= 1.0;
          modifiedTime = Date.now();

          if (newSettings.dhw.target < prevSettings.dhw.minTemp) {
@@ -265,7 +265,7 @@
            return;
          }
          
-          newSettings.dhw.target += 1;
+          newSettings.dhw.target += 1.0;
          modifiedTime = Date.now();

          if (newSettings.dhw.target > prevSettings.dhw.maxTemp) {
@@ -287,7 +287,7 @@

        document.querySelector('#thermostat-dhw-enabled').addEventListener('change', (event) => {
          modifiedTime = Date.now();
-          newSettings.heating.dhw = event.currentTarget.checked;
+          newSettings.dhw.enable = event.currentTarget.checked;
        });

        setTimeout(async function onLoadPage() {
@@ -326,7 +326,7 @@
            }

            const result = await response.json();
-            noRegulators = !result.equitherm.enable && !result.pid.enable;
+            noRegulators = !result.opentherm.nativeHeatingControl && !result.equitherm.enable && !result.pid.enable;
            prevSettings = result;
            newSettings.heating.enable = result.heating.enable;
            newSettings.heating.turbo = result.heating.turbo;
--- a/src_data/index.html
+++ b/src_data/index.html
@@ -87,7 +87,7 @@
            <tbody>
              <tr>
                <th scope="row">Version:</th>
-                <td><b id="version"></b></td>
+                <td><b id="version"></b>, core/sdk: <b id="core-version"></b></td>
              </tr>
              <tr>
                <th scope="row">Build date:</th>
@@ -101,6 +101,10 @@
                <th scope="row">Free memory:</th>
                <td><b id="free-heap"></b> of <b id="total-heap"></b> bytes (min: <b id="min-free-heap"></b> bytes)<br />max free block: <b id="max-free-block-heap"></b> bytes (min: <b id="min-max-free-block-heap"></b> bytes)</td>
              </tr>
+              <tr>
+                <th scope="row">Board:</th>
+                <td>Chip <b id="chip-model"></b> (rev. <span id="chip-revision"></span>)<br />Cores: <b id="chip-cores"></b>, frequency: <b id="cpu-freq"></b> mHz<br />Flash size: <b id="flash-size"></b> MB (real: <b id="flash-real-size"></b> MB)</td>
+              </tr>
              <tr>
                <th scope="row">Last reset reason:</th>
                <td><b id="reset-reason"></b></td>
@@ -164,6 +168,15 @@
            setValue('#max-free-block-heap', result.system.maxFreeBlockHeap);
            setValue('#min-max-free-block-heap', result.system.minMaxFreeBlockHeap);
            setValue('#reset-reason', result.system.resetReason);
+            
+            setValue('#chip-model', result.system.chipModel);
+            setValue('#chip-revision', result.system.chipRevision);
+            setValue('#chip-cores', result.system.chipCores);
+            setValue('#cpu-freq', result.system.cpuFreq);
+            setValue('#core-version', result.system.coreVersion);
+            setValue('#flash-size', result.system.flashSize / 1024 / 1024);
+            setValue('#flash-real-size', result.system.flashRealSize / 1024 / 1024);
+
            setBusy('#system-busy', '#system-table', false);

          } catch (error) {
--- a/src_data/network.html
+++ b/src_data/network.html
@@ -76,7 +76,7 @@
        </hgroup>

        <form action="/api/network/scan" id="network-scan">
-          <figure style="max-height: 25em;">
+          <div style="max-height: 25rem;" class="overflow-auto">
            <table id="networks" role="grid">
              <thead>
                <tr>
@@ -87,7 +87,7 @@
              </thead>
              <tbody></tbody>
            </table>
-          </figure>
+          </div>

          <button type="submit">Refresh</button>
        </form>
--- a/src_data/settings.html
+++ b/src_data/settings.html
@@ -67,12 +67,12 @@
              <legend>Unit system</legend>

              <label>
-                <input type="radio" id="system-unit-system" name="system[unitSystem]" value="0" />
+                <input type="radio" class="system-unit-system" name="system[unitSystem]" value="0" />
                Metric (celsius, liters, bar)
              </label>

              <label>
-                <input type="radio" id="system-unit-system" name="system[unitSystem]" value="1" />
+                <input type="radio" class="system-unit-system" name="system[unitSystem]" value="1" />
                Imperial (fahrenheit, gallons, psi)
              </label>
            </fieldset>
@@ -116,9 +116,7 @@
                  <small>Default: 23</small>
                </label>
              </div>
-            </fieldset>

-            <fieldset>
              <mark>After changing this settings, the ESP must be restarted for the changes to take effect.</mark>
            </fieldset>

@@ -317,7 +315,7 @@

              <label for="pid-i-factor">
                I factor
-                <input type="number" inputmode="numeric" id="pid-i-factor" name="pid[i_factor]" min="0" max="100" step="0.001" required>
+                <input type="number" inputmode="numeric" id="pid-i-factor" name="pid[i_factor]" min="0" max="100" step="0.0001" required>
              </label>

              <label for="pid-d-factor">
@@ -361,12 +359,12 @@
              <legend>Unit system</legend>

              <label>
-                <input type="radio" id="opentherm-unit-system" name="opentherm[unitSystem]" value="0" />
+                <input type="radio" class="opentherm-unit-system" name="opentherm[unitSystem]" value="0" />
                Metric (celsius)
              </label>

              <label>
-                <input type="radio" id="opentherm-unit-system" name="opentherm[unitSystem]" value="1" />
+                <input type="radio" class="opentherm-unit-system" name="opentherm[unitSystem]" value="1" />
                Imperial (fahrenheit)
              </label>
            </fieldset>
@@ -437,6 +435,27 @@
                <input type="checkbox" id="opentherm-get-min-max-temp" name="opentherm[getMinMaxTemp]" value="true">
                Get min/max temp from boiler
              </label>
+
+              <hr />
+              <fieldset>
+                <label for="opentherm-fault-state-gpio">
+                  Fault state GPIO
+                  <input type="number" inputmode="numeric" id="opentherm-fault-state-gpio" name="opentherm[faultStateGpio]" min="0" max="254" step="1">
+                  <small>Can be useful to switch on another boiler <u>via relay</u>. Blank - not use.</small>
+                </label>
+  
+                <label for="opentherm-invert-fault-state">
+                  <input type="checkbox" id="opentherm-invert-fault-state" name="opentherm[invertFaultState]" value="true">
+                  Invert fault state
+                </label>
+              </fieldset>
+              
+              <hr />
+              <label for="opentherm-native-heating-control">
+                <input type="checkbox" id="opentherm-native-heating-control" name="opentherm[nativeHeatingControl]" value="true">
+                Native heating control (boiler)<br />
+                <small>Works <u>ONLY</u> if the boiler requires the desired room temperature and regulates the temperature of the coolant itself. Not compatible with PID and Equitherm regulators and hysteresis in firmware.</small>
+              </label>
            </fieldset>

            <button type="submit">Save</button>
@@ -456,6 +475,11 @@
                <input type="checkbox" id="mqtt-enable" name="mqtt[enable]" value="true">
                Enable
              </label>
+
+              <label for="mqtt-ha-discovery">
+                <input type="checkbox" id="mqtt-ha-discovery" name="mqtt[homeAssistantDiscovery]" value="true">
+                Home Assistant Discovery
+              </label>
            </fieldset>

            <div class="grid">
@@ -510,17 +534,17 @@
              <legend>Source type</legend>

              <label>
-                <input type="radio" id="outdoor-sensor-type" name="sensors[outdoor][type]" value="0" />
+                <input type="radio" class="outdoor-sensor-type" name="sensors[outdoor][type]" value="0" />
                From boiler via OpenTherm
              </label>

              <label>
-                <input type="radio" id="outdoor-sensor-type" name="sensors[outdoor][type]" value="1" />
+                <input type="radio" class="outdoor-sensor-type" name="sensors[outdoor][type]" value="1" />
                Manual via MQTT/API
              </label>

              <label>
-                <input type="radio" id="outdoor-sensor-type" name="sensors[outdoor][type]" value="2" />
+                <input type="radio" class="outdoor-sensor-type" name="sensors[outdoor][type]" value="2" />
                External (DS18B20)
              </label>
            </fieldset>
@@ -551,17 +575,17 @@
              <legend>Source type</legend>

              <label>
-                <input type="radio" id="indoor-sensor-type" name="sensors[indoor][type]" value="1" />
+                <input type="radio" class="indoor-sensor-type" name="sensors[indoor][type]" value="1" />
                Manual via MQTT/API
              </label>

              <label>
-                <input type="radio" id="indoor-sensor-type" name="sensors[indoor][type]" value="2" />
+                <input type="radio" class="indoor-sensor-type" name="sensors[indoor][type]" value="2" />
                External (DS18B20)
              </label>

              <label>
-                <input type="radio" id="indoor-sensor-type" name="sensors[indoor][type]" value="3" />
+                <input type="radio" class="indoor-sensor-type" name="sensors[indoor][type]" value="3" />
                BLE device <i>(ONLY for some ESP32 which support BLE)</i>
              </label>
            </fieldset>
@@ -655,7 +679,7 @@
        setInputValue('#system-serial-baudrate', data.system.serial.baudrate);
        setCheckboxValue('#system-telnet-enable', data.system.telnet.enable);
        setInputValue('#system-telnet-port', data.system.telnet.port);
-        setRadioValue('#system-unit-system', data.system.unitSystem);
+        setRadioValue('.system-unit-system', data.system.unitSystem);
        setInputValue('#system-status-led-gpio', data.system.statusLedGpio < 255 ? data.system.statusLedGpio : '');
        setBusy('#system-settings-busy', '#system-settings', false);

@@ -666,10 +690,12 @@
        setBusy('#portal-settings-busy', '#portal-settings', false);

        // Opentherm
-        setRadioValue('#opentherm-unit-system', data.opentherm.unitSystem);
+        setRadioValue('.opentherm-unit-system', data.opentherm.unitSystem);
        setInputValue('#opentherm-in-gpio', data.opentherm.inGpio < 255 ? data.opentherm.inGpio : '');
        setInputValue('#opentherm-out-gpio', data.opentherm.outGpio < 255 ? data.opentherm.outGpio : '');
        setInputValue('#opentherm-rx-led-gpio', data.opentherm.rxLedGpio < 255 ? data.opentherm.rxLedGpio : '');
+        setInputValue('#opentherm-fault-state-gpio', data.opentherm.faultStateGpio < 255 ? data.opentherm.faultStateGpio : '');
+        setCheckboxValue('#opentherm-invert-fault-state', data.opentherm.invertFaultState);
        setInputValue('#opentherm-member-id-code', data.opentherm.memberIdCode);
        setCheckboxValue('#opentherm-dhw-present', data.opentherm.dhwPresent);
        setCheckboxValue('#opentherm-sw-mode', data.opentherm.summerWinterMode);
@@ -679,10 +705,12 @@
        setCheckboxValue('#opentherm-dhw-blocking', data.opentherm.dhwBlocking);
        setCheckboxValue('#opentherm-sync-modulation-with-heating', data.opentherm.modulationSyncWithHeating);
        setCheckboxValue('#opentherm-get-min-max-temp', data.opentherm.getMinMaxTemp);
+        setCheckboxValue('#opentherm-native-heating-control', data.opentherm.nativeHeatingControl);
        setBusy('#opentherm-settings-busy', '#opentherm-settings', false);

        // MQTT
        setCheckboxValue('#mqtt-enable', data.mqtt.enable);
+        setCheckboxValue('#mqtt-ha-discovery', data.mqtt.homeAssistantDiscovery);
        setInputValue('#mqtt-server', data.mqtt.server);
        setInputValue('#mqtt-port', data.mqtt.port);
        setInputValue('#mqtt-user', data.mqtt.user);
@@ -692,13 +720,13 @@
        setBusy('#mqtt-settings-busy', '#mqtt-settings', false);

        // Outdoor sensor
-        setRadioValue('#outdoor-sensor-type', data.sensors.outdoor.type);
+        setRadioValue('.outdoor-sensor-type', data.sensors.outdoor.type);
        setInputValue('#outdoor-sensor-gpio', data.sensors.outdoor.gpio  < 255 ? data.sensors.outdoor.gpio : '');
        setInputValue('#outdoor-sensor-offset', data.sensors.outdoor.offset);
        setBusy('#outdoor-sensor-settings-busy', '#outdoor-sensor-settings', false);

        // Indoor sensor
-        setRadioValue('#indoor-sensor-type', data.sensors.indoor.type);
+        setRadioValue('.indoor-sensor-type', data.sensors.indoor.type);
        setInputValue('#indoor-sensor-gpio', data.sensors.indoor.gpio < 255 ? data.sensors.indoor.gpio : '');
        setInputValue('#indoor-sensor-offset', data.sensors.indoor.offset);
        setInputValue('#indoor-sensor-ble-addresss', data.sensors.indoor.bleAddresss);
Author	SHA1	Message	Date
Yurii	f245f37dfd	chore: bump version	2024-05-26 17:41:12 +03:00
Yurii	a825412f37	feat: added fault state GPIO setting	2024-05-25 02:51:10 +03:00
Yurii	935f8bd0a8	fix: outdoor sensor GPIO validation fixed	2024-05-25 00:17:55 +03:00
Yurii	f78d2f38b8	fix: equitherm with BLE indoor sensor in emergency mode fixed	2024-04-25 13:38:03 +03:00
Yurii	ef083991e3	feat: added board info on portal	2024-04-23 10:30:42 +03:00
Yurii	3c0f846335	fix: added set target indoor temp to CH2 for native heating control #58	2024-04-23 08:13:03 +03:00
Yurii	85011ce4ea	chore: bump version	2024-04-22 08:19:41 +03:00
Yurii	8687e122ca	feat: added native heating control by boiler; refactoring; emergency settings removed from HA	2024-04-22 08:18:59 +03:00
Yurii	d35ea81080	fix: PID optimization, correction of default PID settings	2024-04-18 00:04:23 +03:00
Yurii	cca8ec58b4	fix: fix radio on settings page (portal)	2024-04-16 18:58:28 +03:00
Yurii	301b14bbd4	chore: bump version	2024-04-15 15:07:28 +03:00
Yurii	41ce9b268e	fix: fix set heating temp on ITALTHERM TIME MAX 30F	2024-04-15 15:00:41 +03:00
Yurii	646939179e	fix: serial on s2, s3 fixed	2024-04-15 05:49:46 +03:00
Yurii	73dddd18f0	fix: scan networks on s3 fixed	2024-04-15 02:47:42 +03:00
Yurii	f069de0415	chore: fix typo	2024-04-12 21:47:09 +03:00