jeka/MyOwnEtherCATDevice
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Working linuxcnc lathe config with 2 ms cycle time

Browse Source
This commit is contained in:
Hakan Bastedt
2024-04-07 21:53:25 +02:00
parent a829b0c6e2
commit ed8e4d8d39
66 changed files with 10534 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

23
linuxcnc/Turner.2ms/gmoccapy_postgui.hal Normal file
View File

@@ -0,0 +1,23 @@
###################################################################
# moccapy_postgui.hal file from Norbert Schechner #
###################################################################
loadrt abs names=abs_spindle_feedback
addf abs_spindle_feedback servo-thread
net spindle-speed-limited => abs_spindle_feedback.in
net spindle-abs abs_spindle_feedback.out => gmoccapy.spindle_feedback_bar
net spindle-at-speed gmoccapy.spindle_at_speed_led
# the unlink pin commands are only used, because they are connected
# in core_sim.hal and we use this file to simulate
unlinkp iocontrol.0.tool-change
unlinkp iocontrol.0.tool-changed
unlinkp iocontrol.0.tool-prep-number
net tool-change gmoccapy.toolchange-change <= iocontrol.0.tool-change
net tool-changed gmoccapy.toolchange-changed <= iocontrol.0.tool-changed
net tool-prep-number gmoccapy.toolchange-number <= iocontrol.0.tool-prep-number
net tooloffset-x gmoccapy.tooloffset-x <= motion.tooloffset.x
net tooloffset-z gmoccapy.tooloffset-z <= motion.tooloffset.z