New backup from 08/18/2024 - 08:33:06 PM

3dsprinter_data/config/jschuh_klipper_macros.cfg

@@ -0,0 +1,72 @@
+# All customizations are documented in globals.cfg. Just copy a variable from
+# there into the section below, and change the value to meet your needs.
+
+[gcode_macro _km_options]
+# These are examples of some likely customizations:
+# Any sheets in the below list will be available with a configurable offset.
+#variable_bed_surfaces: ['smooth_1','texture_1']
+# Length (in mm) of filament to load (bowden tubes will be longer).
+#variable_load_length: 90.0
+# Hide the Octoprint LCD menu since I don't use it.
+variable_menu_show_octoprint: False
+# Customize the filament menus (up to 10 entries).
+variable_menu_temperature: [
+  {'name' : 'PLA',  'extruder' : 225.0, 'bed' : 60.0},
+  {'name' : 'PETG', 'extruder' : 230.0, 'bed' : 85.0},
+  {'name' : 'ABS',  'extruder' : 245.0, 'bed' : 110.0, 'chamber' : 60}]
+# Length of filament (in millimeters) to purge at print start.
+variable_start_purge_length: 30 # This value works for most setups.
+gcode: # This line is required by Klipper.
+# Any code you put here will run at klipper startup, after the initialization
+# for these macros. For example, you could uncomment the following line to
+# automatically adjust your bed surface offsets to account for any changes made
+# to your Z endstop or probe offset.
+#  ADJUST_SURFACE_OFFSETS
+
+# BACKUP config to git.npau.ru
+[gcode_macro update_git]
+gcode:
+    {% set message = params.MESSAGE|default() %}
+    {% if message %}
+        RUN_SHELL_COMMAND CMD=update_git_script_message PARAMS="'{params.MESSAGE}'"
+    {% else %}
+        RUN_SHELL_COMMAND CMD=update_git_script
+    {% endif %}
+
+[gcode_shell_command update_git_script]
+command: bash -c "bash $HOME/klipper-backup-3dsprinter/script.sh"
+timeout: 90.0
+verbose: True
+
+[gcode_shell_command update_git_script_message]
+command: bash -c "bash $HOME/klipper-backup-3dsprinter/script.sh $0"
+timeout: 90.0
+verbose: True
+
+# This line includes all the standard macros.
+[include klipper-macros/*.cfg]
+# Uncomment to include features that require specific hardware support.
+# LCD menu support for features like bed surface selection and pause next layer.
+[include klipper-macros/optional/lcd_menus.cfg]
+# Optimized bed leveling
+[include klipper-macros/optional/bed_mesh.cfg]
+
+# The sections below here are required for the macros to work. If your config
+# already has some of these sections you should merge the duplicates into one
+# (or if they are identical just remove one of them).
+[idle_timeout]
+gcode:
+  _KM_IDLE_TIMEOUT # This line must be in your idle_timeout section.
+
+[pause_resume]
+
+[respond]
+
+[save_variables]
+filename: ~/3dsprinter_data/variables.cfg # UPDATE THIS FOR YOUR PATH!!!
+
+[virtual_sdcard]
+path: ~/3dsprinter_data/gcodes
+on_error_gcode: CANCEL_PRINT
+
+[display_status]