diff --git a/3dsprinter_data/config/crowsnest.conf b/3dsprinter_data/config/crowsnest.conf
index ada3651..18d05be 100644
--- a/3dsprinter_data/config/crowsnest.conf
+++ b/3dsprinter_data/config/crowsnest.conf
@@ -36,12 +36,14 @@ no_proxy: false
 
 [cam 1]
 mode: ustreamer                         # ustreamer - Provides mjpg and snapshots. (All devices)
-                                        # camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
-enable_rtsp: false                      # If camera-streamer is used, this enables also usage of an rtsp server
-rtsp_port: 8554                         # Set different ports for each device!
 port: 8080                              # HTTP/MJPG Stream/Snapshot Port
-device: /dev/video1                     # See Log for available ...
+device: /dev/v4l/by-id/usb-_Webcam_C110-video-index0                     # See Log for available ...
 resolution: 640x480                     # widthxheight format
 max_fps: 15                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
-#custom_flags:                          # You can run the Stream Services with custom flags.
-#v4l2ctl:                               # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
+
+[cam 2]
+mode: ustreamer
+port: 8081
+device: /dev/v4l/by-id/usb-046d_0825_5C2671A0-video-index0
+resolution: 640x480
+max_fps: 15
diff --git a/3dsprinter_data/config/jschuh_klipper_macros.cfg b/3dsprinter_data/config/jschuh_klipper_macros.cfg
new file mode 100644
index 0000000..d45799e
--- /dev/null
+++ b/3dsprinter_data/config/jschuh_klipper_macros.cfg
@@ -0,0 +1,72 @@
+# All customizations are documented in globals.cfg. Just copy a variable from
+# there into the section below, and change the value to meet your needs.
+
+[gcode_macro _km_options]
+# These are examples of some likely customizations:
+# Any sheets in the below list will be available with a configurable offset.
+#variable_bed_surfaces: ['smooth_1','texture_1']
+# Length (in mm) of filament to load (bowden tubes will be longer).
+#variable_load_length: 90.0
+# Hide the Octoprint LCD menu since I don't use it.
+variable_menu_show_octoprint: False
+# Customize the filament menus (up to 10 entries).
+variable_menu_temperature: [
+  {'name' : 'PLA',  'extruder' : 225.0, 'bed' : 60.0},
+  {'name' : 'PETG', 'extruder' : 230.0, 'bed' : 85.0},
+  {'name' : 'ABS',  'extruder' : 245.0, 'bed' : 110.0, 'chamber' : 60}]
+# Length of filament (in millimeters) to purge at print start.
+variable_start_purge_length: 30 # This value works for most setups.
+gcode: # This line is required by Klipper.
+# Any code you put here will run at klipper startup, after the initialization
+# for these macros. For example, you could uncomment the following line to
+# automatically adjust your bed surface offsets to account for any changes made
+# to your Z endstop or probe offset.
+#  ADJUST_SURFACE_OFFSETS
+
+# BACKUP config to git.npau.ru
+[gcode_macro update_git]
+gcode:
+    {% set message = params.MESSAGE|default() %}
+    {% if message %}
+        RUN_SHELL_COMMAND CMD=update_git_script_message PARAMS="'{params.MESSAGE}'"
+    {% else %}
+        RUN_SHELL_COMMAND CMD=update_git_script
+    {% endif %}
+
+[gcode_shell_command update_git_script]
+command: bash -c "bash $HOME/klipper-backup-3dsprinter/script.sh"
+timeout: 90.0
+verbose: True
+
+[gcode_shell_command update_git_script_message]
+command: bash -c "bash $HOME/klipper-backup-3dsprinter/script.sh $0"
+timeout: 90.0
+verbose: True
+
+# This line includes all the standard macros.
+[include klipper-macros/*.cfg]
+# Uncomment to include features that require specific hardware support.
+# LCD menu support for features like bed surface selection and pause next layer.
+[include klipper-macros/optional/lcd_menus.cfg]
+# Optimized bed leveling
+[include klipper-macros/optional/bed_mesh.cfg]
+
+# The sections below here are required for the macros to work. If your config
+# already has some of these sections you should merge the duplicates into one
+# (or if they are identical just remove one of them).
+[idle_timeout]
+gcode:
+  _KM_IDLE_TIMEOUT # This line must be in your idle_timeout section.
+
+[pause_resume]
+
+[respond]
+
+[save_variables]
+filename: ~/3dsprinter_data/variables.cfg # UPDATE THIS FOR YOUR PATH!!!
+
+[virtual_sdcard]
+path: ~/3dsprinter_data/gcodes
+on_error_gcode: CANCEL_PRINT
+
+[display_status]
\ No newline at end of file
diff --git a/3dsprinter_data/config/moonraker.conf b/3dsprinter_data/config/moonraker.conf
index b9b73de..06a04f3 100644
--- a/3dsprinter_data/config/moonraker.conf
+++ b/3dsprinter_data/config/moonraker.conf
@@ -67,9 +67,29 @@ primary_branch: main
 is_system_service: False
 managed_services: klipper
 
-[power printer]
+# Notifier
+[notifier telegram]
+# url: tgram://{bottoken}/{ChatID}
+url: tgram://7093071502:AAFGW5ygvu9oRgsZsS0CpU8-hy8x_oaxlsc/158812314
+events: started, complete, error, cancelled, paused, resumed
+body_format: text
+title: ⚠️ 3dsprinter Сообщение.
+body: Статус принтера изменен на {event_name}. Файл: '{event_args[1].filename}'.
+attach: http://192.168.47.44/webcam/?action=snapshot
+
+[power printergpio]
 type: gpio
-pin: gpiochip1/gpio26
+pin: gpiochip1/gpio113
 off_when_shutdown: true
 restart_klipper_when_powered: true
 initial_state: off
+
+[power haas_switch_13]
+type: homeassistant
+protocol: http
+address: 192.168.47.8
+port: 8123
+device: light.m0f_13
+token: eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiI5NTFjMzRlZmYwYjg0NTcyOTJjN2EzMTk0M2ZlMWI0YSIsImlhdCI6MTcyMTY3MDI0MiwiZXhwIjoyMDM3MDMwMjQyfQ.cHfHviVBNokbxTFKWdHoYGtI_GyKaI1N2xvNV94LmrY
+domain: light
+status_delay: 1.0
diff --git a/3dsprinter_data/config/printer.cfg b/3dsprinter_data/config/printer.cfg
index b92ae1d..0539f9e 100644
--- a/3dsprinter_data/config/printer.cfg
+++ b/3dsprinter_data/config/printer.cfg
@@ -1,11 +1,15 @@
-[include shell_command.cfg]
-[include fluidd.cfg]
+[include jschuh_klipper_macros.cfg]
 
-[virtual_sdcard]
-path: /home/jeka/3dsprinter_data/gcodes
-on_error_gcode: CANCEL_PRINT
+[filament_switch_sensor runout]
+switch_pin: !PG5
+pause_on_runout: True
+insert_gcode:
+runout_gcode:
 
-[include macros.cfg]
+[temperature_sensor odroidC2]
+sensor_type: temperature_host
+min_temp: 10
+max_temp: 100
 
 [mcu]
 serial: /dev/serial/by-id/usb-Arduino__www.arduino.cc__0042_75638303037351301112-if00
@@ -116,7 +120,10 @@ sensor_pin: PK5
 #pid_Ki: 1.08
 #pid_Kd: 114
 min_temp: 0
-max_temp: 250
+max_temp: 270
+pressure_advance: 0.5
+max_extrude_cross_section: 99999
+#min_extrude_temp: 0
 
 [heater_bed]
 heater_pin: PH5
@@ -126,9 +133,24 @@ control: watermark
 min_temp: 0
 max_temp: 130
 
+[verify_heater heater_bed]
+max_error: 130
+check_gain_time: 300
+hysteresis: 3
+heating_gain: 1
+
+[verify_heater extruder]
+max_error: 120
+check_gain_time: 20
+hysteresis: 5
+heating_gain: 2
+
 [fan]
 pin: PH6
 
+[output_pin beeper]
+pin: EXP1_1
+
 [printer]
 kinematics: corexy
 max_velocity: 500
@@ -162,23 +184,12 @@ aliases:
 #*# <---------------------- SAVE_CONFIG ---------------------->
 #*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
 #*#
-#*# [extruder]
-#*# control = pid
-#*# pid_kp = 25.328
-#*# pid_ki = 1.578
-#*# pid_kd = 101.628
-#*#
-#*# [heater_bed]
-#*# pid_kp = 72.255
-#*# pid_ki = 1.487
-#*# pid_kd = 877.904
-#*#
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
-#*# 	  -0.037500, -0.042500, -0.027500, -0.016250, 0.016250
-#*# 	  -0.017500, -0.006250, 0.042500, 0.056250, 0.036250
-#*# 	  0.045000, 0.062500, 0.098750, 0.116250, 0.076250
+#*# 	  0.052500, 0.021250, 0.022500, 0.058750, 0.073750
+#*# 	  0.027500, -0.008750, 0.022500, 0.041250, 0.058750
+#*# 	  0.100000, 0.095000, 0.126250, 0.146250, 0.163750
 #*# x_count = 5
 #*# y_count = 3
 #*# mesh_x_pps = 2
@@ -191,4 +202,10 @@ aliases:
 #*# max_y = 150.0
 #*#
 #*# [bltouch]
-#*# z_offset = 2.290
+#*# z_offset = 2.360
+#*#
+#*# [extruder]
+#*# control = pid
+#*# pid_kp = 26.528
+#*# pid_ki = 1.579
+#*# pid_kd = 111.418
diff --git a/3dsprinter_data/config/telegram.conf b/3dsprinter_data/config/telegram.conf
index 8046fc3..1a87d47 100644
--- a/3dsprinter_data/config/telegram.conf
+++ b/3dsprinter_data/config/telegram.conf
@@ -12,10 +12,10 @@ host: http://192.168.47.44/webcam/?action=stream
 [progress_notification]
 percent: 5
 height: 5
-time: 5
+#time: 5
 
-[timelapse]
-cleanup: true
-height: 0.2
-time: 5
-target_fps: 30
+#[timelapse]
+#cleanup: true
+#height: 0.2
+#time: 5
+#target_fps: 30