74 lines
2.7 KiB
INI
74 lines
2.7 KiB
INI
# All customizations are documented in globals.cfg. Just copy a variable from
|
|
# there into the section below, and change the value to meet your needs.
|
|
|
|
[gcode_macro _km_options]
|
|
# These are examples of some likely customizations:
|
|
# Any sheets in the below list will be available with a configurable offset.
|
|
#variable_bed_surfaces: ['smooth_1','texture_1']
|
|
# Length (in mm) of filament to load (bowden tubes will be longer).
|
|
#variable_load_length: 90.0
|
|
# Hide the Octoprint LCD menu since I don't use it.
|
|
variable_menu_show_octoprint: False
|
|
# Customize the filament menus (up to 10 entries).
|
|
variable_menu_temperature: [
|
|
{'name' : 'PLA', 'extruder' : 225.0, 'bed' : 60.0},
|
|
{'name' : 'PETG', 'extruder' : 230.0, 'bed' : 85.0},
|
|
{'name' : 'ABS', 'extruder' : 245.0, 'bed' : 90.0, 'chamber' : 60}]
|
|
# Length of filament (in millimeters) to purge at print start.
|
|
#variable_start_purge_length: 30 # This value works for most setups.
|
|
gcode: # This line is required by Klipper.
|
|
# Any code you put here will run at klipper startup, after the initialization
|
|
# for these macros. For example, you could uncomment the following line to
|
|
# automatically adjust your bed surface offsets to account for any changes made
|
|
# to your Z endstop or probe offset.
|
|
# ADJUST_SURFACE_OFFSETS
|
|
|
|
[gcode_macro update_git]
|
|
gcode:
|
|
{% set message = params.MESSAGE|default() %}
|
|
{% if message %}
|
|
RUN_SHELL_COMMAND CMD=update_git_script_message PARAMS="'{params.MESSAGE}'"
|
|
{% else %}
|
|
RUN_SHELL_COMMAND CMD=update_git_script
|
|
{% endif %}
|
|
|
|
[gcode_shell_command update_git_script]
|
|
command: bash -c "bash $HOME/klipper-backup-steel/script.sh"
|
|
timeout: 90.0
|
|
verbose: True
|
|
|
|
[gcode_shell_command update_git_script_message]
|
|
command: bash -c "bash $HOME/klipper-backup-steel/script.sh $0"
|
|
timeout: 90.0
|
|
verbose: True
|
|
|
|
# This line includes all the standard macros.
|
|
[include klipper-macros/*.cfg]
|
|
# Uncomment to include features that require specific hardware support.
|
|
# LCD menu support for features like bed surface selection and pause next layer.
|
|
[include klipper-macros/optional/lcd_menus.cfg]
|
|
# Optimized bed leveling
|
|
[include klipper-macros/optional/bed_mesh.cfg]
|
|
|
|
# The sections below here are required for the macros to work. If your config
|
|
# already has some of these sections you should merge the duplicates into one
|
|
# (or if they are identical just remove one of them).
|
|
[idle_timeout]
|
|
gcode:
|
|
_KM_IDLE_TIMEOUT # This line must be in your idle_timeout section.
|
|
|
|
[pause_resume]
|
|
|
|
[respond]
|
|
|
|
[save_variables]
|
|
filename: ~/steel_data/variables.cfg
|
|
|
|
[virtual_sdcard]
|
|
path: ~/steel_data/gcodes
|
|
on_error_gcode: CANCEL_PRINT
|
|
|
|
[display_status]
|
|
|
|
[exclude_object]
|