New backup from 14/07/24 - 20:02:54
This commit is contained in:
@@ -1,13 +0,0 @@
|
|||||||
[include shell_command.cfg]
|
|
||||||
[include fluidd.cfg]
|
|
||||||
[mcu]
|
|
||||||
serial: /dev/serial/by-id/<your-mcu-id>
|
|
||||||
|
|
||||||
[virtual_sdcard]
|
|
||||||
path: /home/jeka/ender_data/gcodes
|
|
||||||
on_error_gcode: CANCEL_PRINT
|
|
||||||
|
|
||||||
[printer]
|
|
||||||
kinematics: none
|
|
||||||
max_velocity: 1000
|
|
||||||
max_accel: 1000
|
|
||||||
@@ -1,20 +0,0 @@
|
|||||||
# Please refer to the wiki(https://github.com/nlef/moonraker-telegram-bot/wiki) for detailed information on how to configure the bot
|
|
||||||
|
|
||||||
[bot]
|
|
||||||
server: localhost
|
|
||||||
bot_token: AweSomeBotToken
|
|
||||||
chat_id: 0
|
|
||||||
|
|
||||||
[camera]
|
|
||||||
host: http://localhost:8080/?action=stream
|
|
||||||
|
|
||||||
[progress_notification]
|
|
||||||
percent: 5
|
|
||||||
height: 5
|
|
||||||
time: 5
|
|
||||||
|
|
||||||
[timelapse]
|
|
||||||
cleanup: true
|
|
||||||
height: 0.2
|
|
||||||
time: 5
|
|
||||||
target_fps: 30
|
|
||||||
60
steel_data/config/crowsnest.conf
Normal file
60
steel_data/config/crowsnest.conf
Normal file
@@ -0,0 +1,60 @@
|
|||||||
|
#### crowsnest.conf
|
||||||
|
#### This is a typical default config.
|
||||||
|
#### Also used as default in mainsail / MainsailOS
|
||||||
|
#### See:
|
||||||
|
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
|
||||||
|
#### for details to configure to your needs.
|
||||||
|
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
#### #####
|
||||||
|
#### Information about ports and according URL's #####
|
||||||
|
#### #####
|
||||||
|
#####################################################################
|
||||||
|
#### #####
|
||||||
|
#### Port 8080 equals /webcam/?action=[stream/snapshot] #####
|
||||||
|
#### Port 8081 equals /webcam2/?action=[stream/snapshot] #####
|
||||||
|
#### Port 8082 equals /webcam3/?action=[stream/snapshot] #####
|
||||||
|
#### Port 8083 equals /webcam4/?action=[stream/snapshot] #####
|
||||||
|
#### #####
|
||||||
|
#### Note: These ports are default for most Mainsail #####
|
||||||
|
#### installations. To use any other port would involve #####
|
||||||
|
#### changing the proxy configuration or using directly #####
|
||||||
|
#### http://<ip>:<port>/?action=[stream/snapshot] #####
|
||||||
|
#### #####
|
||||||
|
#####################################################################
|
||||||
|
#### RTSP Stream URL: ( if enabled and supported ) #####
|
||||||
|
#### rtsp://<ip>:<rtsp_port>/stream.h264 #####
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
|
||||||
|
[crowsnest]
|
||||||
|
log_path: /home/jeka/steel_data/logs/crowsnest.log
|
||||||
|
log_level: verbose # Valid Options are quiet/verbose/debug
|
||||||
|
delete_log: false # Deletes log on every restart, if set to true
|
||||||
|
no_proxy: false
|
||||||
|
|
||||||
|
[cam 1]
|
||||||
|
mode: camera-streamer # ustreamer - Provides mjpg and snapshots. (All devices)
|
||||||
|
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
|
||||||
|
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
|
||||||
|
rtsp_port: 8554 # Set different ports for each device!
|
||||||
|
port: 8080 # HTTP/MJPG Stream/Snapshot Port
|
||||||
|
device: /base/soc/i2c0mux/i2c@1/imx219@10
|
||||||
|
resolution: 1296x972 # widthxheight format
|
||||||
|
max_fps: 15 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
|
||||||
|
#custom_flags: # You can run the Stream Services with custom flags.
|
||||||
|
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
|
||||||
|
|
||||||
|
[cam 2]
|
||||||
|
mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)
|
||||||
|
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
|
||||||
|
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
|
||||||
|
rtsp_port: 8555 # Set different ports for each device!
|
||||||
|
port: 8081 # HTTP/MJPG Stream/Snapshot Port
|
||||||
|
device: /dev/v4l/by-id/usb-AONI_ELECTRONIC_CO.LTD_Canyon_CNS-CWC5_Webcam_20200706001-video-index0
|
||||||
|
resolution: 1024x768 # widthxheight format
|
||||||
|
max_fps: 15 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
|
||||||
|
#custom_flags: # You can run the Stream Services with custom flags.
|
||||||
|
v4l2ctl: focus_auto=0,exposure_auto=1,exposure_absolute=450 # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
|
||||||
|
#
|
||||||
267
steel_data/config/macros.cfg
Normal file
267
steel_data/config/macros.cfg
Normal file
@@ -0,0 +1,267 @@
|
|||||||
|
# This file provides examples of Klipper G-Code macros. The snippets
|
||||||
|
# in this file may be copied into the main printer.cfg file and
|
||||||
|
# customized.
|
||||||
|
|
||||||
|
# See docs/Config_Reference.md for a description of parameters.
|
||||||
|
#
|
||||||
|
# BACKUP config to git.npau.ru
|
||||||
|
[gcode_macro update_git]
|
||||||
|
gcode:
|
||||||
|
{% set message = params.MESSAGE|default() %}
|
||||||
|
{% if message %}
|
||||||
|
RUN_SHELL_COMMAND CMD=update_git_script_message PARAMS="'{params.MESSAGE}'"
|
||||||
|
{% else %}
|
||||||
|
RUN_SHELL_COMMAND CMD=update_git_script
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
[gcode_shell_command update_git_script]
|
||||||
|
command: bash -c "bash $HOME/klipper-backup-steel/script.sh"
|
||||||
|
timeout: 90.0
|
||||||
|
verbose: True
|
||||||
|
|
||||||
|
[gcode_shell_command update_git_script_message]
|
||||||
|
command: bash -c "bash $HOME/klipper-backup-steel/script.sh $0"
|
||||||
|
timeout: 90.0
|
||||||
|
verbose: True
|
||||||
|
|
||||||
|
|
||||||
|
######################################################################
|
||||||
|
# Start Print and End Print
|
||||||
|
######################################################################
|
||||||
|
|
||||||
|
# Replace the slicer's custom start and end g-code scripts with
|
||||||
|
# START_PRINT and END_PRINT. See docs/Slicers.md for more information on using these macros.
|
||||||
|
|
||||||
|
[gcode_macro _POWER_OFF_PRINTER]
|
||||||
|
gcode:
|
||||||
|
{action_call_remote_method("set_device_power",
|
||||||
|
device="printer",
|
||||||
|
state="off")}
|
||||||
|
|
||||||
|
[delayed_gcode POWER_OFF_PRINTER_CHECK]
|
||||||
|
gcode:
|
||||||
|
{% if printer.idle_timeout.state == "Idle" or printer.idle_timeout.state == "Ready" %}
|
||||||
|
{% if printer.extruder.temperature < 50.0 and printer.heater_bed.temperature < 50.0 %}
|
||||||
|
{% if printer.extruder.target == 0.0 and printer.heater_bed.target == 0.0 %}
|
||||||
|
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=0
|
||||||
|
_POWER_OFF_PRINTER
|
||||||
|
{% else %}
|
||||||
|
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=2
|
||||||
|
{% endif %}
|
||||||
|
{% else %}
|
||||||
|
{% if printer.idle_timeout.state == "Printing" %}
|
||||||
|
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=0
|
||||||
|
{% else %}
|
||||||
|
{% if printer.extruder.target == 0.0 and printer.heater_bed.target == 0.0 %}
|
||||||
|
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=2
|
||||||
|
{% else %}
|
||||||
|
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=0
|
||||||
|
{% endif %}
|
||||||
|
{% endif %}
|
||||||
|
{% endif %}
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
[gcode_macro ACTIVATE_POWER_OFF]
|
||||||
|
gcode:
|
||||||
|
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK_ACT DURATION=60
|
||||||
|
|
||||||
|
[gcode_macro DEACTIVATE_POWER_OFF]
|
||||||
|
gcode:
|
||||||
|
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK_ACT DURATION=0
|
||||||
|
|
||||||
|
[delayed_gcode POWER_OFF_PRINTER_CHECK_ACT]
|
||||||
|
gcode:
|
||||||
|
{% if printer.idle_timeout.state == "Idle" or printer.idle_timeout.state == "Ready" %}
|
||||||
|
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=30
|
||||||
|
{% else %}
|
||||||
|
UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK_ACT DURATION=60
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
[gcode_macro START_PRINT]
|
||||||
|
gcode:
|
||||||
|
{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
|
||||||
|
{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
|
||||||
|
# Start bed heating
|
||||||
|
M140 S{BED_TEMP}
|
||||||
|
# Use absolute coordinates
|
||||||
|
G90
|
||||||
|
# Reset the G-Code Z offset (adjust Z offset if needed)
|
||||||
|
SET_GCODE_OFFSET Z=0.0
|
||||||
|
# Home the printer
|
||||||
|
G28
|
||||||
|
# Move the nozzle near the bed
|
||||||
|
BED_MESH_PROFILE LOAD=default
|
||||||
|
G1 Z5 F3000
|
||||||
|
# Move the nozzle very close to the bed
|
||||||
|
G1 Z0.15 F300
|
||||||
|
# Wait for bed to reach temperature
|
||||||
|
M190 S{BED_TEMP}
|
||||||
|
# Set and wait for nozzle to reach temperature
|
||||||
|
M109 S{EXTRUDER_TEMP}
|
||||||
|
|
||||||
|
[gcode_macro END_PRINT]
|
||||||
|
gcode:
|
||||||
|
# Turn off bed, extruder, and fan
|
||||||
|
M140 S0
|
||||||
|
M104 S0
|
||||||
|
M106 S0
|
||||||
|
# Move nozzle away from print while retracting
|
||||||
|
G91
|
||||||
|
G1 X-2 Y-2 E-3 F300
|
||||||
|
# Raise nozzle by 10mm
|
||||||
|
G1 Z10 F3000
|
||||||
|
G90
|
||||||
|
# Disable steppers
|
||||||
|
M84
|
||||||
|
|
||||||
|
|
||||||
|
######################################################################
|
||||||
|
# Beeper
|
||||||
|
######################################################################
|
||||||
|
|
||||||
|
# M300 : Play tone. Beeper support, as commonly found on usual LCD
|
||||||
|
# displays (i.e. RepRapDiscount 2004 Smart Controller, RepRapDiscount
|
||||||
|
# 12864 Full Graphic). This defines a custom I/O pin and a custom
|
||||||
|
# GCODE macro. Usage:
|
||||||
|
# M300 [P<ms>] [S<Hz>]
|
||||||
|
# P is the tone duration, S the tone frequency.
|
||||||
|
# The frequency won't be pitch perfect.
|
||||||
|
|
||||||
|
[pwm_cycle_time BEEPER_pin]
|
||||||
|
pin: EXP1_1
|
||||||
|
# Beeper pin. This parameter must be provided.
|
||||||
|
# ar37 is the default RAMPS/MKS pin.
|
||||||
|
value: 0
|
||||||
|
# Silent at power on, set to 1 if active low.
|
||||||
|
shutdown_value: 0
|
||||||
|
# Disable at emergency shutdown (no PWM would be available anyway).
|
||||||
|
cycle_time: 0.001
|
||||||
|
# Default PWM frequency : 0.001 = 1ms will give a tone of 1kHz
|
||||||
|
# Although not pitch perfect.
|
||||||
|
|
||||||
|
[gcode_macro M300]
|
||||||
|
gcode:
|
||||||
|
# Use a default 1kHz tone if S is omitted.
|
||||||
|
{% set S = params.S|default(1000)|int %}
|
||||||
|
# Use a 10ms duration is P is omitted.
|
||||||
|
{% set P = params.P|default(100)|int %}
|
||||||
|
SET_PIN PIN=BEEPER_pin VALUE=0.5 CYCLE_TIME={ 1.0/S if S > 0 else 1 }
|
||||||
|
G4 P{P}
|
||||||
|
SET_PIN PIN=BEEPER_pin VALUE=0
|
||||||
|
|
||||||
|
|
||||||
|
######################################################################
|
||||||
|
# Filament Change
|
||||||
|
######################################################################
|
||||||
|
|
||||||
|
# M600: Filament Change. This macro will pause the printer, move the
|
||||||
|
# tool to the change position, and retract the filament 50mm. Adjust
|
||||||
|
# the retraction settings for your own extruder. After filament has
|
||||||
|
# been changed, the print can be resumed from its previous position
|
||||||
|
# with the "RESUME" gcode.
|
||||||
|
|
||||||
|
[pause_resume]
|
||||||
|
|
||||||
|
[gcode_macro M600]
|
||||||
|
gcode:
|
||||||
|
{% set X = params.X|default(50)|float %}
|
||||||
|
{% set Y = params.Y|default(0)|float %}
|
||||||
|
{% set Z = params.Z|default(10)|float %}
|
||||||
|
SAVE_GCODE_STATE NAME=M600_state
|
||||||
|
PAUSE
|
||||||
|
G91
|
||||||
|
G1 E-.8 F2700
|
||||||
|
G1 Z{Z}
|
||||||
|
G90
|
||||||
|
G1 X{X} Y{Y} F3000
|
||||||
|
G91
|
||||||
|
G1 E-50 F1000
|
||||||
|
RESTORE_GCODE_STATE NAME=M600_state
|
||||||
|
|
||||||
|
######################################################################
|
||||||
|
# Override M117 command with rawparams
|
||||||
|
######################################################################
|
||||||
|
|
||||||
|
# The macro below will override the default M117 command to echo the message.
|
||||||
|
#
|
||||||
|
# It uses the rawparams pseudo-variable that contains the full unparsed
|
||||||
|
# parameters that was passed to the M117 command.
|
||||||
|
#
|
||||||
|
# As this can include comments, we are trimming the text when a `;` or `#` is
|
||||||
|
# found, and escaping any existing `"`
|
||||||
|
|
||||||
|
[gcode_macro M117]
|
||||||
|
rename_existing: M117.1
|
||||||
|
gcode:
|
||||||
|
{% if rawparams %}
|
||||||
|
{% set escaped_msg = rawparams.split(';', 1)[0].split('\x23', 1)[0]|replace('"', '\\"') %}
|
||||||
|
SET_DISPLAY_TEXT MSG="{escaped_msg}"
|
||||||
|
RESPOND TYPE=command MSG="{escaped_msg}"
|
||||||
|
{% else %}
|
||||||
|
SET_DISPLAY_TEXT
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
# SDCard 'looping' (aka Marlin M808 commands) support
|
||||||
|
#
|
||||||
|
# Support SDCard looping
|
||||||
|
[sdcard_loop]
|
||||||
|
|
||||||
|
# 'Marlin' style M808 compatibility macro for SDCard looping
|
||||||
|
[gcode_macro M808]
|
||||||
|
gcode:
|
||||||
|
{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
|
||||||
|
{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
|
||||||
|
{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}
|
||||||
|
|
||||||
|
# Cancel object (aka Marlin/RRF M486 commands) support
|
||||||
|
#
|
||||||
|
# Enable object exclusion
|
||||||
|
[exclude_object]
|
||||||
|
|
||||||
|
[gcode_macro M486]
|
||||||
|
gcode:
|
||||||
|
# Parameters known to M486 are as follows:
|
||||||
|
# [C<flag>] Cancel the current object
|
||||||
|
# [P<index>] Cancel the object with the given index
|
||||||
|
# [S<index>] Set the index of the current object.
|
||||||
|
# If the object with the given index has been canceled, this will cause
|
||||||
|
# the firmware to skip to the next object. The value -1 is used to
|
||||||
|
# indicate something that isn’t an object and shouldn’t be skipped.
|
||||||
|
# [T<count>] Reset the state and set the number of objects
|
||||||
|
# [U<index>] Un-cancel the object with the given index. This command will be
|
||||||
|
# ignored if the object has already been skipped
|
||||||
|
|
||||||
|
{% if 'exclude_object' not in printer %}
|
||||||
|
{action_raise_error("[exclude_object] is not enabled")}
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
{% if 'T' in params %}
|
||||||
|
EXCLUDE_OBJECT RESET=1
|
||||||
|
|
||||||
|
{% for i in range(params.T | int) %}
|
||||||
|
EXCLUDE_OBJECT_DEFINE NAME={i}
|
||||||
|
{% endfor %}
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
{% if 'C' in params %}
|
||||||
|
EXCLUDE_OBJECT CURRENT=1
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
{% if 'P' in params %}
|
||||||
|
EXCLUDE_OBJECT NAME={params.P}
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
{% if 'S' in params %}
|
||||||
|
{% if params.S == '-1' %}
|
||||||
|
{% if printer.exclude_object.current_object %}
|
||||||
|
EXCLUDE_OBJECT_END NAME={printer.exclude_object.current_object}
|
||||||
|
{% endif %}
|
||||||
|
{% else %}
|
||||||
|
EXCLUDE_OBJECT_START NAME={params.S}
|
||||||
|
{% endif %}
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
{% if 'U' in params %}
|
||||||
|
EXCLUDE_OBJECT RESET=1 NAME={params.U}
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
@@ -1,7 +1,7 @@
|
|||||||
[server]
|
[server]
|
||||||
host: 0.0.0.0
|
host: 0.0.0.0
|
||||||
port: 7125
|
port: 7126
|
||||||
klippy_uds_address: /home/jeka/ender_data/comms/klippy.sock
|
klippy_uds_address: /home/jeka/steel_data/comms/klippy.sock
|
||||||
|
|
||||||
[authorization]
|
[authorization]
|
||||||
trusted_clients:
|
trusted_clients:
|
||||||
@@ -49,9 +49,35 @@ env: ~/moonraker-telegram-bot-env/bin/python
|
|||||||
requirements: scripts/requirements.txt
|
requirements: scripts/requirements.txt
|
||||||
install_script: scripts/install.sh
|
install_script: scripts/install.sh
|
||||||
|
|
||||||
[update_manager klipper-backup-ender]
|
# Crowsnest update_manager entry
|
||||||
|
[update_manager crowsnest]
|
||||||
type: git_repo
|
type: git_repo
|
||||||
path: ~/klipper-backup-ender
|
path: ~/crowsnest
|
||||||
|
origin: https://github.com/mainsail-crew/crowsnest.git
|
||||||
|
managed_services: crowsnest
|
||||||
|
install_script: tools/pkglist.sh
|
||||||
|
|
||||||
|
[update_manager klipper-macros]
|
||||||
|
type: git_repo
|
||||||
|
origin: https://github.com/jschuh/klipper-macros.git
|
||||||
|
path: ~/klipper-macros
|
||||||
|
primary_branch: main
|
||||||
|
is_system_service: False
|
||||||
|
managed_services: klipper
|
||||||
|
|
||||||
|
[update_manager klipper-backup-steel]
|
||||||
|
type: git_repo
|
||||||
|
path: ~/klipper-backup-steel
|
||||||
origin: https://github.com/Staubgeborener/klipper-backup.git
|
origin: https://github.com/Staubgeborener/klipper-backup.git
|
||||||
managed_services: moonraker
|
managed_services: moonraker
|
||||||
primary_branch: main
|
primary_branch: main
|
||||||
|
|
||||||
|
[power printer]
|
||||||
|
type: gpio
|
||||||
|
pin: gpiochip0/gpio2
|
||||||
|
off_when_shutdown: true
|
||||||
|
on_when_job_queued: true
|
||||||
|
locked_while_printing: true
|
||||||
|
restart_klipper_when_powered: false
|
||||||
|
initial_state: off
|
||||||
|
|
||||||
180
steel_data/config/printer.cfg
Normal file
180
steel_data/config/printer.cfg
Normal file
@@ -0,0 +1,180 @@
|
|||||||
|
[include shell_command.cfg]
|
||||||
|
[include fluidd.cfg]
|
||||||
|
|
||||||
|
[virtual_sdcard]
|
||||||
|
path: /home/jeka/steel_data/gcodes
|
||||||
|
on_error_gcode: CANCEL_PRINT
|
||||||
|
|
||||||
|
[include macros.cfg]
|
||||||
|
|
||||||
|
[virtual_sdcard]
|
||||||
|
path: /home/jeka/steel_data/gcodes
|
||||||
|
on_error_gcode: CANCEL_PRINT
|
||||||
|
|
||||||
|
[mcu]
|
||||||
|
serial: /dev/ttySteel
|
||||||
|
|
||||||
|
# ================================================================================
|
||||||
|
# Homing Override:
|
||||||
|
# This section is called any time a G28 [home] is called.
|
||||||
|
|
||||||
|
;[homing_override]
|
||||||
|
;set_position_z:0
|
||||||
|
;gcode:
|
||||||
|
; G1 Z10 F600
|
||||||
|
; G28 X Y
|
||||||
|
; G1 X102.5 Y99.5 F6000
|
||||||
|
; G28 Z
|
||||||
|
; G1 Z5
|
||||||
|
|
||||||
|
[bed_mesh]
|
||||||
|
speed: 60
|
||||||
|
horizontal_move_z: 5
|
||||||
|
mesh_min: 15,15
|
||||||
|
mesh_max: 180,180
|
||||||
|
probe_count: 3, 3
|
||||||
|
mesh_pps: 2, 2
|
||||||
|
fade_start: 1
|
||||||
|
fade_end: 10
|
||||||
|
fade_target: 0
|
||||||
|
|
||||||
|
[bed_screws]
|
||||||
|
screw1: 15,10
|
||||||
|
screw2: 15,185
|
||||||
|
screw3: 185,10
|
||||||
|
screw4: 185,185
|
||||||
|
|
||||||
|
#[safe_z_home]
|
||||||
|
#home_xy_position = 0,0
|
||||||
|
#speed = 50
|
||||||
|
#z_hop = 5
|
||||||
|
#_hop_speed = 5
|
||||||
|
|
||||||
|
[stepper_x]
|
||||||
|
step_pin: PF0
|
||||||
|
dir_pin: !PF1
|
||||||
|
enable_pin: !PD7
|
||||||
|
microsteps: 16
|
||||||
|
rotation_distance: 32
|
||||||
|
endstop_pin: ^!PE4
|
||||||
|
position_endstop: 200
|
||||||
|
position_max: 200
|
||||||
|
position_min: 0
|
||||||
|
homing_speed: 50
|
||||||
|
|
||||||
|
[stepper_y]
|
||||||
|
step_pin: PF6
|
||||||
|
dir_pin: !PF7
|
||||||
|
enable_pin: !PF2
|
||||||
|
microsteps: 16
|
||||||
|
rotation_distance: 32
|
||||||
|
endstop_pin: ^!PJ0
|
||||||
|
position_endstop: 200
|
||||||
|
position_max: 200
|
||||||
|
position_min: 0
|
||||||
|
homing_speed: 50
|
||||||
|
|
||||||
|
[stepper_z]
|
||||||
|
step_pin: PL3
|
||||||
|
dir_pin: !PL1
|
||||||
|
enable_pin: !PK0
|
||||||
|
microsteps: 16
|
||||||
|
rotation_distance: 0.8
|
||||||
|
endstop_pin: ^!PD3
|
||||||
|
#position_endstop: 0.0
|
||||||
|
position_max: 270
|
||||||
|
position_min: -5
|
||||||
|
homing_speed: 20
|
||||||
|
|
||||||
|
[extruder]
|
||||||
|
max_extrude_only_distance: 101.0
|
||||||
|
step_pin: PA4
|
||||||
|
dir_pin: PA6
|
||||||
|
enable_pin: !PA2
|
||||||
|
microsteps: 16
|
||||||
|
rotation_distance: 22.222
|
||||||
|
nozzle_diameter: 0.400
|
||||||
|
filament_diameter: 1.750
|
||||||
|
heater_pin: PB4
|
||||||
|
sensor_type: EPCOS 100K B57560G104F
|
||||||
|
sensor_pin: PK5
|
||||||
|
#control: pid
|
||||||
|
min_temp: 0
|
||||||
|
max_temp: 250
|
||||||
|
#pid_kp = 21.801
|
||||||
|
#pid_ki = 1.546
|
||||||
|
#pid_kd = 76.848
|
||||||
|
|
||||||
|
[heater_bed]
|
||||||
|
heater_pin: PH5
|
||||||
|
sensor_type: EPCOS 100K B57560G104F
|
||||||
|
sensor_pin: PK6
|
||||||
|
control: watermark
|
||||||
|
min_temp: 0
|
||||||
|
max_temp: 110
|
||||||
|
;pid_kp = 72.814
|
||||||
|
;pid_ki = 1.634
|
||||||
|
;pid_kd = 810.970
|
||||||
|
|
||||||
|
[fan]
|
||||||
|
pin: PH6
|
||||||
|
|
||||||
|
[printer]
|
||||||
|
kinematics: cartesian
|
||||||
|
max_velocity: 300
|
||||||
|
max_accel: 3000
|
||||||
|
max_z_velocity: 5
|
||||||
|
max_z_accel: 100
|
||||||
|
square_corner_velocity: 20.0
|
||||||
|
|
||||||
|
[display]
|
||||||
|
lcd_type: st7920
|
||||||
|
cs_pin: EXP1_4
|
||||||
|
sclk_pin: EXP1_5
|
||||||
|
sid_pin: EXP1_3
|
||||||
|
encoder_pins: ^EXP2_3, ^EXP2_5
|
||||||
|
click_pin: ^!EXP1_2
|
||||||
|
|
||||||
|
;[output_pin BEEPER_pin]
|
||||||
|
;ipin: EXP1_1
|
||||||
|
|
||||||
|
# Common EXP1 / EXP2 (display) pins
|
||||||
|
[board_pins]
|
||||||
|
aliases:
|
||||||
|
# Common EXP1 header found on many "all-in-one" ramps clones
|
||||||
|
EXP1_1=PC0, EXP1_3=PH0, EXP1_5=PA1, EXP1_7=PA5, EXP1_9=<GND>,
|
||||||
|
EXP1_2=PC2, EXP1_4=PH1, EXP1_6=PA3, EXP1_8=PA7, EXP1_10=<5V>,
|
||||||
|
# EXP2 header
|
||||||
|
EXP2_1=PB3, EXP2_3=PC6, EXP2_5=PC4, EXP2_7=PL0, EXP2_9=<GND>,
|
||||||
|
EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PG0, EXP2_10=<RST>
|
||||||
|
# Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
|
||||||
|
# Note, some boards wire: EXP2_8=<RST>, EXP2_10=PG0
|
||||||
|
|
||||||
|
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||||
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||||
|
#*#
|
||||||
|
#*# [extruder]
|
||||||
|
#*# control = pid
|
||||||
|
#*# pid_kp = 28.696
|
||||||
|
#*# pid_ki = 2.035
|
||||||
|
#*# pid_kd = 101.153
|
||||||
|
#*#
|
||||||
|
#*# [stepper_z]
|
||||||
|
#*# position_endstop = 4.180
|
||||||
|
#*#
|
||||||
|
#*# [bed_mesh default]
|
||||||
|
#*# version = 1
|
||||||
|
#*# points =
|
||||||
|
#*# 0.410000, 0.500000, 0.390000
|
||||||
|
#*# 0.380000, 0.360000, 0.190000
|
||||||
|
#*# 0.330000, 0.410000, 0.320000
|
||||||
|
#*# x_count = 3
|
||||||
|
#*# y_count = 3
|
||||||
|
#*# mesh_x_pps = 2
|
||||||
|
#*# mesh_y_pps = 2
|
||||||
|
#*# algo = lagrange
|
||||||
|
#*# tension = 0.2
|
||||||
|
#*# min_x = 15.0
|
||||||
|
#*# max_x = 180.0
|
||||||
|
#*# min_y = 15.0
|
||||||
|
#*# max_y = 180.0
|
||||||
40
steel_data/config/telegram.conf
Normal file
40
steel_data/config/telegram.conf
Normal file
@@ -0,0 +1,40 @@
|
|||||||
|
# Please refer to the wiki(https://github.com/nlef/moonraker-telegram-bot/wiki) for detailed information on how to configure the bot
|
||||||
|
|
||||||
|
#[bot]
|
||||||
|
#server: localhost
|
||||||
|
#bot_token: AweSomeBotToken
|
||||||
|
#chat_id: 0
|
||||||
|
#
|
||||||
|
#[camera]
|
||||||
|
#host: http://localhost:8080/?action=streamhttps://github.com/nlef/moonraker-telegram-bot/wiki/Sample-config$0
|
||||||
|
#
|
||||||
|
#[progress_notification]
|
||||||
|
#percent: 5
|
||||||
|
#height: 5
|
||||||
|
#time: 5
|
||||||
|
#
|
||||||
|
#[timelapse]
|
||||||
|
#cleanup: true
|
||||||
|
#height: 0.2
|
||||||
|
#time: 5
|
||||||
|
#target_fps: 30
|
||||||
|
|
||||||
|
|
||||||
|
[bot]
|
||||||
|
server: 192.168.77.44:7126
|
||||||
|
bot_token: 5171688404:AAH1P9RgT1AsICfVjhjC7jTjL7W_iFKnUhM
|
||||||
|
chat_id: 158812314
|
||||||
|
|
||||||
|
[camera]
|
||||||
|
host: http://192.168.77.44/webcam2/?action=stream
|
||||||
|
|
||||||
|
[progress_notification]
|
||||||
|
percent: 5
|
||||||
|
height: 5.0
|
||||||
|
time: 5
|
||||||
|
|
||||||
|
#[timelapse]
|
||||||
|
#cleanup: true
|
||||||
|
#height: 0.2
|
||||||
|
#time: 5
|
||||||
|
#target_fps: 30
|
||||||
Reference in New Issue
Block a user