diff --git a/steel_data/config/moonraker.conf b/ender_data/config/moonraker.conf similarity index 58% rename from steel_data/config/moonraker.conf rename to ender_data/config/moonraker.conf index 098f0cd..36003e1 100644 --- a/steel_data/config/moonraker.conf +++ b/ender_data/config/moonraker.conf @@ -1,7 +1,7 @@ [server] host: 0.0.0.0 -port: 7126 -klippy_uds_address: /home/jeka/steel_data/comms/klippy.sock +port: 7125 +klippy_uds_address: /home/jeka/ender_data/comms/klippy.sock [authorization] trusted_clients: @@ -49,35 +49,9 @@ env: ~/moonraker-telegram-bot-env/bin/python requirements: scripts/requirements.txt install_script: scripts/install.sh -# Crowsnest update_manager entry -[update_manager crowsnest] +[update_manager klipper-backup-ender] type: git_repo -path: ~/crowsnest -origin: https://github.com/mainsail-crew/crowsnest.git -managed_services: crowsnest -install_script: tools/pkglist.sh - -[update_manager klipper-macros] -type: git_repo -origin: https://github.com/jschuh/klipper-macros.git -path: ~/klipper-macros -primary_branch: main -is_system_service: False -managed_services: klipper - -[update_manager klipper-backup-steel] -type: git_repo -path: ~/klipper-backup-steel +path: ~/klipper-backup-ender origin: https://github.com/Staubgeborener/klipper-backup.git managed_services: moonraker primary_branch: main - -[power printer] -type: gpio -pin: gpiochip0/gpio2 -off_when_shutdown: true -on_when_job_queued: true -locked_while_printing: true -restart_klipper_when_powered: false -initial_state: off - diff --git a/ender_data/config/printer.cfg b/ender_data/config/printer.cfg new file mode 100644 index 0000000..1ce5383 --- /dev/null +++ b/ender_data/config/printer.cfg @@ -0,0 +1,13 @@ +[include shell_command.cfg] +[include fluidd.cfg] +[mcu] +serial: /dev/serial/by-id/ + +[virtual_sdcard] +path: /home/jeka/ender_data/gcodes +on_error_gcode: CANCEL_PRINT + +[printer] +kinematics: none +max_velocity: 1000 +max_accel: 1000 diff --git a/steel_data/config/shell_command.cfg b/ender_data/config/shell_command.cfg similarity index 100% rename from steel_data/config/shell_command.cfg rename to ender_data/config/shell_command.cfg diff --git a/ender_data/config/telegram.conf b/ender_data/config/telegram.conf new file mode 100644 index 0000000..6d5b90b --- /dev/null +++ b/ender_data/config/telegram.conf @@ -0,0 +1,20 @@ +# Please refer to the wiki(https://github.com/nlef/moonraker-telegram-bot/wiki) for detailed information on how to configure the bot + +[bot] +server: localhost +bot_token: AweSomeBotToken +chat_id: 0 + +[camera] +host: http://localhost:8080/?action=stream + +[progress_notification] +percent: 5 +height: 5 +time: 5 + +[timelapse] +cleanup: true +height: 0.2 +time: 5 +target_fps: 30 diff --git a/steel_data/config/crowsnest.conf b/steel_data/config/crowsnest.conf deleted file mode 100644 index 4abcef6..0000000 --- a/steel_data/config/crowsnest.conf +++ /dev/null @@ -1,60 +0,0 @@ -#### crowsnest.conf -#### This is a typical default config. -#### Also used as default in mainsail / MainsailOS -#### See: -#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md -#### for details to configure to your needs. - - -##################################################################### -#### ##### -#### Information about ports and according URL's ##### -#### ##### -##################################################################### -#### ##### -#### Port 8080 equals /webcam/?action=[stream/snapshot] ##### -#### Port 8081 equals /webcam2/?action=[stream/snapshot] ##### -#### Port 8082 equals /webcam3/?action=[stream/snapshot] ##### -#### Port 8083 equals /webcam4/?action=[stream/snapshot] ##### -#### ##### -#### Note: These ports are default for most Mainsail ##### -#### installations. To use any other port would involve ##### -#### changing the proxy configuration or using directly ##### -#### http://:/?action=[stream/snapshot] ##### -#### ##### -##################################################################### -#### RTSP Stream URL: ( if enabled and supported ) ##### -#### rtsp://:/stream.h264 ##### -##################################################################### - - -[crowsnest] -log_path: /home/jeka/steel_data/logs/crowsnest.log -log_level: verbose # Valid Options are quiet/verbose/debug -delete_log: false # Deletes log on every restart, if set to true -no_proxy: false - -[cam 1] -mode: camera-streamer # ustreamer - Provides mjpg and snapshots. (All devices) - # camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only) -enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server -rtsp_port: 8554 # Set different ports for each device! -port: 8080 # HTTP/MJPG Stream/Snapshot Port -device: /base/soc/i2c0mux/i2c@1/imx219@10 -resolution: 1296x972 # widthxheight format -max_fps: 15 # If Hardware Supports this it will be forced, otherwise ignored/coerced. -#custom_flags: # You can run the Stream Services with custom flags. -#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of. - -[cam 2] -mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices) - # camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only) -enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server -rtsp_port: 8555 # Set different ports for each device! -port: 8081 # HTTP/MJPG Stream/Snapshot Port -device: /dev/v4l/by-id/usb-AONI_ELECTRONIC_CO.LTD_Canyon_CNS-CWC5_Webcam_20200706001-video-index0 -resolution: 1024x768 # widthxheight format -max_fps: 15 # If Hardware Supports this it will be forced, otherwise ignored/coerced. -#custom_flags: # You can run the Stream Services with custom flags. -v4l2ctl: focus_auto=0,exposure_auto=1,exposure_absolute=450 # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of. -# diff --git a/steel_data/config/macros.cfg b/steel_data/config/macros.cfg deleted file mode 100644 index f5f1418..0000000 --- a/steel_data/config/macros.cfg +++ /dev/null @@ -1,266 +0,0 @@ -# This file provides examples of Klipper G-Code macros. The snippets -# in this file may be copied into the main printer.cfg file and -# customized. - -# See docs/Config_Reference.md for a description of parameters. -# -# BACKUP config to git.npau.ru -[gcode_macro update_git] -gcode: - {% set message = params.MESSAGE|default() %} - {% if message %} - RUN_SHELL_COMMAND CMD=update_git_script_message PARAMS="'{params.MESSAGE}'" - {% else %} - RUN_SHELL_COMMAND CMD=update_git_script - {% endif %} - -[gcode_shell_command update_git_script] -command: bash -c "bash $HOME/klipper-backup-steel/script.sh" -timeout: 90.0 -verbose: True - -[gcode_shell_command update_git_script_message] -command: bash -c "bash $HOME/klipper-backup-steel/script.sh $0" -timeout: 90.0 -verbose: True - - -###################################################################### -# Start Print and End Print -###################################################################### - -# Replace the slicer's custom start and end g-code scripts with -# START_PRINT and END_PRINT. See docs/Slicers.md for more information on using these macros. - -[gcode_macro _POWER_OFF_PRINTER] -gcode: - {action_call_remote_method("set_device_power", - device="printer", - state="off")} - -[delayed_gcode POWER_OFF_PRINTER_CHECK] -gcode: - {% if printer.idle_timeout.state == "Idle" or printer.idle_timeout.state == "Ready" %} - {% if printer.extruder.temperature < 50.0 and printer.heater_bed.temperature < 50.0 %} - {% if printer.extruder.target == 0.0 and printer.heater_bed.target == 0.0 %} - UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=0 - _POWER_OFF_PRINTER - {% else %} - UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=2 - {% endif %} - {% else %} - {% if printer.idle_timeout.state == "Printing" %} - UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=0 - {% else %} - {% if printer.extruder.target == 0.0 and printer.heater_bed.target == 0.0 %} - UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=2 - {% else %} - UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=0 - {% endif %} - {% endif %} - {% endif %} - {% endif %} - -[gcode_macro ACTIVATE_POWER_OFF] -gcode: - UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK_ACT DURATION=60 - -[gcode_macro DEACTIVATE_POWER_OFF] -gcode: - UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK_ACT DURATION=0 - -[delayed_gcode POWER_OFF_PRINTER_CHECK_ACT] -gcode: - {% if printer.idle_timeout.state == "Idle" or printer.idle_timeout.state == "Ready" %} - UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK DURATION=30 - {% else %} - UPDATE_DELAYED_GCODE ID=POWER_OFF_PRINTER_CHECK_ACT DURATION=60 - {% endif %} - -[gcode_macro START_PRINT] -gcode: - {% set BED_TEMP = params.BED_TEMP|default(60)|float %} - {% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %} - # Start bed heating - M140 S{BED_TEMP} - # Use absolute coordinates - G90 - # Reset the G-Code Z offset (adjust Z offset if needed) - SET_GCODE_OFFSET Z=0.0 - # Home the printer - G28 - # Move the nozzle near the bed - G1 Z5 F3000 - # Move the nozzle very close to the bed - G1 Z0.15 F300 - # Wait for bed to reach temperature - M190 S{BED_TEMP} - # Set and wait for nozzle to reach temperature - M109 S{EXTRUDER_TEMP} - -[gcode_macro END_PRINT] -gcode: - # Turn off bed, extruder, and fan - M140 S0 - M104 S0 - M106 S0 - # Move nozzle away from print while retracting - G91 - G1 X-2 Y-2 E-3 F300 - # Raise nozzle by 10mm - G1 Z10 F3000 - G90 - # Disable steppers - M84 - - -###################################################################### -# Beeper -###################################################################### - -# M300 : Play tone. Beeper support, as commonly found on usual LCD -# displays (i.e. RepRapDiscount 2004 Smart Controller, RepRapDiscount -# 12864 Full Graphic). This defines a custom I/O pin and a custom -# GCODE macro. Usage: -# M300 [P] [S] -# P is the tone duration, S the tone frequency. -# The frequency won't be pitch perfect. - -[pwm_cycle_time BEEPER_pin] -pin: EXP1_1 -# Beeper pin. This parameter must be provided. -# ar37 is the default RAMPS/MKS pin. -value: 0 -# Silent at power on, set to 1 if active low. -shutdown_value: 0 -# Disable at emergency shutdown (no PWM would be available anyway). -cycle_time: 0.001 -# Default PWM frequency : 0.001 = 1ms will give a tone of 1kHz -# Although not pitch perfect. - -[gcode_macro M300] -gcode: - # Use a default 1kHz tone if S is omitted. - {% set S = params.S|default(1000)|int %} - # Use a 10ms duration is P is omitted. - {% set P = params.P|default(100)|int %} - SET_PIN PIN=BEEPER_pin VALUE=0.5 CYCLE_TIME={ 1.0/S if S > 0 else 1 } - G4 P{P} - SET_PIN PIN=BEEPER_pin VALUE=0 - - -###################################################################### -# Filament Change -###################################################################### - -# M600: Filament Change. This macro will pause the printer, move the -# tool to the change position, and retract the filament 50mm. Adjust -# the retraction settings for your own extruder. After filament has -# been changed, the print can be resumed from its previous position -# with the "RESUME" gcode. - -[pause_resume] - -[gcode_macro M600] -gcode: - {% set X = params.X|default(50)|float %} - {% set Y = params.Y|default(0)|float %} - {% set Z = params.Z|default(10)|float %} - SAVE_GCODE_STATE NAME=M600_state - PAUSE - G91 - G1 E-.8 F2700 - G1 Z{Z} - G90 - G1 X{X} Y{Y} F3000 - G91 - G1 E-50 F1000 - RESTORE_GCODE_STATE NAME=M600_state - -###################################################################### -# Override M117 command with rawparams -###################################################################### - -# The macro below will override the default M117 command to echo the message. -# -# It uses the rawparams pseudo-variable that contains the full unparsed -# parameters that was passed to the M117 command. -# -# As this can include comments, we are trimming the text when a `;` or `#` is -# found, and escaping any existing `"` - -[gcode_macro M117] -rename_existing: M117.1 -gcode: - {% if rawparams %} - {% set escaped_msg = rawparams.split(';', 1)[0].split('\x23', 1)[0]|replace('"', '\\"') %} - SET_DISPLAY_TEXT MSG="{escaped_msg}" - RESPOND TYPE=command MSG="{escaped_msg}" - {% else %} - SET_DISPLAY_TEXT - {% endif %} - -# SDCard 'looping' (aka Marlin M808 commands) support -# -# Support SDCard looping -[sdcard_loop] - -# 'Marlin' style M808 compatibility macro for SDCard looping -[gcode_macro M808] -gcode: - {% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %} - {% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %} - {% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %} - -# Cancel object (aka Marlin/RRF M486 commands) support -# -# Enable object exclusion -[exclude_object] - -[gcode_macro M486] -gcode: - # Parameters known to M486 are as follows: - # [C] Cancel the current object - # [P] Cancel the object with the given index - # [S] Set the index of the current object. - # If the object with the given index has been canceled, this will cause - # the firmware to skip to the next object. The value -1 is used to - # indicate something that isn’t an object and shouldn’t be skipped. - # [T] Reset the state and set the number of objects - # [U] Un-cancel the object with the given index. This command will be - # ignored if the object has already been skipped - - {% if 'exclude_object' not in printer %} - {action_raise_error("[exclude_object] is not enabled")} - {% endif %} - - {% if 'T' in params %} - EXCLUDE_OBJECT RESET=1 - - {% for i in range(params.T | int) %} - EXCLUDE_OBJECT_DEFINE NAME={i} - {% endfor %} - {% endif %} - - {% if 'C' in params %} - EXCLUDE_OBJECT CURRENT=1 - {% endif %} - - {% if 'P' in params %} - EXCLUDE_OBJECT NAME={params.P} - {% endif %} - - {% if 'S' in params %} - {% if params.S == '-1' %} - {% if printer.exclude_object.current_object %} - EXCLUDE_OBJECT_END NAME={printer.exclude_object.current_object} - {% endif %} - {% else %} - EXCLUDE_OBJECT_START NAME={params.S} - {% endif %} - {% endif %} - - {% if 'U' in params %} - EXCLUDE_OBJECT RESET=1 NAME={params.U} - {% endif %} - diff --git a/steel_data/config/printer.cfg b/steel_data/config/printer.cfg deleted file mode 100644 index 3874f05..0000000 --- a/steel_data/config/printer.cfg +++ /dev/null @@ -1,163 +0,0 @@ -[include shell_command.cfg] -[include fluidd.cfg] - -[virtual_sdcard] -path: /home/jeka/steel_data/gcodes -on_error_gcode: CANCEL_PRINT - -[include macros.cfg] - -[virtual_sdcard] -path: /home/jeka/steel_data/gcodes -on_error_gcode: CANCEL_PRINT - -[mcu] -serial: /dev/ttySteel - -# ================================================================================ -# Homing Override: -# This section is called any time a G28 [home] is called. - -;[homing_override] -;set_position_z:0 -;gcode: -; G1 Z10 F600 -; G28 X Y -; G1 X102.5 Y99.5 F6000 -; G28 Z -; G1 Z5 - -#[bed_mesh] -#speed: 80 -#horizontal_move_z: 5 -#mesh_min: 15,15 -#mesh_max: 180,180 -#probe_count: 3, 3 -#mesh_pps: 2, 2 -#fade_start: 1 -#fade_end: 10 -#fade_target: 0 - -[bed_screws] -screw1: 15,10 -screw2: 15,185 -screw3: 185,10 -screw4: 185,185 - -#[safe_z_home] -#home_xy_position = 0,0 -#speed = 50 -#z_hop = 5 -#_hop_speed = 5 - -[stepper_x] -step_pin: PF0 -dir_pin: !PF1 -enable_pin: !PD7 -microsteps: 16 -rotation_distance: 32 -endstop_pin: ^!PE4 -position_endstop: 200 -position_max: 200 -position_min: 0 -homing_speed: 50 - -[stepper_y] -step_pin: PF6 -dir_pin: !PF7 -enable_pin: !PF2 -microsteps: 16 -rotation_distance: 32 -endstop_pin: ^!PJ0 -position_endstop: 200 -position_max: 200 -position_min: 0 -homing_speed: 50 - -[stepper_z] -step_pin: PL3 -dir_pin: !PL1 -enable_pin: !PK0 -microsteps: 16 -rotation_distance: 0.8 -endstop_pin: ^!PD3 -#position_endstop: 0.0 -position_max: 270 -position_min: -5 -homing_speed: 20 - -[extruder] -max_extrude_only_distance: 101.0 -step_pin: PA4 -dir_pin: PA6 -enable_pin: !PA2 -microsteps: 16 -rotation_distance: 22.222 -nozzle_diameter: 0.400 -filament_diameter: 1.750 -heater_pin: PB4 -sensor_type: EPCOS 100K B57560G104F -sensor_pin: PK5 -#control: pid -min_temp: 0 -max_temp: 250 -#pid_kp = 21.801 -#pid_ki = 1.546 -#pid_kd = 76.848 - -[heater_bed] -heater_pin: PH5 -sensor_type: EPCOS 100K B57560G104F -sensor_pin: PK6 -control: watermark -min_temp: 0 -max_temp: 110 -;pid_kp = 72.814 -;pid_ki = 1.634 -;pid_kd = 810.970 - -[fan] -pin: PH6 - -[printer] -kinematics: cartesian -max_velocity: 300 -max_accel: 3000 -max_z_velocity: 5 -max_z_accel: 100 -square_corner_velocity: 20.0 - -[display] -lcd_type: st7920 -cs_pin: EXP1_4 -sclk_pin: EXP1_5 -sid_pin: EXP1_3 -encoder_pins: ^EXP2_3, ^EXP2_5 -click_pin: ^!EXP1_2 - -;[output_pin BEEPER_pin] -;ipin: EXP1_1 - -# Common EXP1 / EXP2 (display) pins -[board_pins] -aliases: - # Common EXP1 header found on many "all-in-one" ramps clones - EXP1_1=PC0, EXP1_3=PH0, EXP1_5=PA1, EXP1_7=PA5, EXP1_9=, - EXP1_2=PC2, EXP1_4=PH1, EXP1_6=PA3, EXP1_8=PA7, EXP1_10=<5V>, - # EXP2 header - EXP2_1=PB3, EXP2_3=PC6, EXP2_5=PC4, EXP2_7=PL0, EXP2_9=, - EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PG0, EXP2_10= - # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi" - # Note, some boards wire: EXP2_8=, EXP2_10=PG0 - -#*# <---------------------- SAVE_CONFIG ----------------------> -#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated. -#*# -#*# [extruder] -#*# control = pid -#*# pid_kp = 28.696 -#*# pid_ki = 2.035 -#*# pid_kd = 101.153 -#*# -#*# [stepper_z] -#*# position_endstop = 0.030 diff --git a/steel_data/config/telegram.conf b/steel_data/config/telegram.conf deleted file mode 100644 index 2a6131e..0000000 --- a/steel_data/config/telegram.conf +++ /dev/null @@ -1,40 +0,0 @@ -# Please refer to the wiki(https://github.com/nlef/moonraker-telegram-bot/wiki) for detailed information on how to configure the bot - -#[bot] -#server: localhost -#bot_token: AweSomeBotToken -#chat_id: 0 -# -#[camera] -#host: http://localhost:8080/?action=streamhttps://github.com/nlef/moonraker-telegram-bot/wiki/Sample-config$0 -# -#[progress_notification] -#percent: 5 -#height: 5 -#time: 5 -# -#[timelapse] -#cleanup: true -#height: 0.2 -#time: 5 -#target_fps: 30 - - -[bot] -server: 192.168.77.44:7126 -bot_token: 5171688404:AAH1P9RgT1AsICfVjhjC7jTjL7W_iFKnUhM -chat_id: 158812314 - -[camera] -host: http://192.168.77.44/webcam2/?action=stream - -[progress_notification] -percent: 5 -height: 5.0 -time: 5 - -#[timelapse] -#cleanup: true -#height: 0.2 -#time: 5 -#target_fps: 30