[gcode_macro SET_FILAMENT_SETTINGS]
description: Set print parameters based on filament 'name' or 'id' passed from slicer
# Add following to printer Start G-code : 
## PrusaSliser/SuperSlicer: 
# SET_FILAMENT_SETTINGS FILAMENT='{filament_settings_id[0]}'
# Note: {filament_settings_id[0]} must be enclosed in 'single quotes' to properly process spaces
## Cura: 
# SET_FILAMENT_SETTINGS FILAMENT={material_guid}
# Note: if you encounter duplicates of {material_guid} just edit <GUID> in '%USERPROFILE%\AppData\Roaming\cura\4.xx\materials\*.xml.fdm_material' manually 
gcode:
    {% set filament = params.FILAMENT|default("RESET") %}
    {% set nozzle = printer.configfile.settings.extruder.nozzle_diameter|default(0.4)|float %}
    {% if filament != 'RESET' %}
    # Set parameters
        {% if filament == 'EXAMPLE' %}
            {% if nozzle == 0.4 %} {% set settings = {'pressure_advance': '0.1', 'smooth_time': '0.040', 'retract_length': '1.0', 'retract_speed': '20'} %} {% endif %}
            {% if nozzle == 0.6 %} {% set settings = {'pressure_advance': '0.1', 'smooth_time': '0.040', 'retract_length': '1.0', 'retract_speed': '20'} %} {% endif %}
            {% if nozzle == 0.8 %} {% set settings = {'pressure_advance': '0.1', 'smooth_time': '0.040', 'retract_length': '1.0', 'retract_speed': '20'} %} {% endif %}
        {% elif filament == 'FD ABS' or filament == 'faca2421-e10c-4dbf-a1dc-9f3b620fd969' %}
            {% if nozzle == 0.4 %} {% set settings = {'pressure_advance': '0.1', 'smooth_time': '0.040', 'retract_length': '1.0', 'retract_speed': '20'} %} {% endif %}
        {% elif filament == 'FD PETG' or filament == 'fdff3c20-1d38-4de5-89ee-81789ad8d682' %}
            {% if nozzle == 0.4 %} {% set settings = {'pressure_advance': '0.13', 'smooth_time': '0.100', 'retract_length': '0.4', 'retract_speed': '20'} %} {% endif %}
        {% elif filament == 'FD PLA' or filament == 'b9865b5d-e8fe-41e6-a0ab-e34c58aa66a2' %}
            {% if nozzle == 0.4 %} {% set settings = {'pressure_advance': '0.17', 'smooth_time': '0.040', 'retract_length': '1.0', 'retract_speed': '20'} %} {% endif %}
        {% elif filament == 'HTP ABS' %}
            {% if nozzle == 0.4 %} {% set settings = {'pressure_advance': '0.13', 'smooth_time': '0.040', 'retract_length': '1.0', 'retract_speed': '20'} %} {% endif %}
        {% endif %}
    {% else %}
    # Reset
        {% set pressure_advance = printer.configfile.settings.extruder.pressure_advance|float %}
        {% set smooth_time = printer.configfile.settings.extruder.pressure_advance_smooth_time|float %}
        {% set retract_length = printer.configfile.settings.firmware_retraction.retract_length|float %}
        {% set retract_speed = printer.configfile.settings.firmware_retraction.retract_speed|float %}
        {% set settings = {'pressure_advance': pressure_advance, 'smooth_time': smooth_time, 'retract_length': retract_length, 'retract_speed': retract_speed} %}
    {% endif %}
    SET_PRESSURE_ADVANCE ADVANCE={settings.pressure_advance} SMOOTH_TIME={settings.smooth_time}
    SET_RETRACTION RETRACT_LENGTH={settings.retract_length} RETRACT_SPEED={settings.retract_speed}