Klipper Installation And Update Helper

📋 Please see the Changelog for possible important information !

📢 Disclaimer: Usage of this script happens at your own risk!

🛠️ Instructions:

For downloading this script it is necessary to have git installed.
If you haven't, please run sudo apt-get install git -y to install git first.
After git is installed, use the following commands in the given order to download and execute the script:

cd ~

git clone https://github.com/th33xitus/kiauh.git

./kiauh/kiauh.sh

🧰 Functions and Features:

Core Functions:

Installing Klipper to your Raspberry Pi or other Debian based Linux Distribution.
Installing of the Moonraker API (needed for Mainsail, Fluidd and KlipperScreen)
Installing several web interfaces such as Mainsail, Fluidd, Duet Web Control or OctoPrint including their dependencies.
Installing of KlipperScreen (OctoScreen but for Klipper!)
Updating of all the listed installations above excluding OctoPrint. For updating OctoPrint, please use the OctoPrint interface!
Removing of all the listed installations above.
Backup of all the listed installations above.

Also possible:

Build the Klipper Firmware
Flash the MCU
Read ID of the currently connected MCU
and more ...

For a list of additional features please see: Feature List

❗ Notes:

Tested only on Raspberry Pi OS Lite (Debian 10 Buster)
- Other Debian based distributions can work
- Reported to work on Armbian too
During the use of this script you might be asked for your sudo password. There are several functions involved which need sudo privileges.

🌐 Sources & Further Information

For more information or instructions to the various components KIAUH can install, please check out the corresponding repositories listed below:

Credits

A big thank you to @lixxbox for that awesome KIAUH-Logo!
Also a big thank you to everyone who supported my work with a Ko-fi !
Last but not least: Thank you to all contributors and members of the Klipper Community who like and share this project!

3.4 KiB Raw Blame History