jeka/kiauh
1
0
Fork 0
mirror of https://github.com/dw-0/kiauh.git synced 2025-12-13 18:44:29 +05:00
Code Issues Packages Projects Releases Wiki Activity
Files
0d29bf9f3154ac756f3170e0feb020c00231fafc
kiauh/scripts/install_klipper_webui.sh
th33xitus 0d29bf9f31 fix: wording, description dialog
2021-01-29 18:00:47 +01:00

291 lines
11 KiB
Bash
Executable File
Raw Blame History

check_moonraker(){
status_msg "Checking for Moonraker service ..."
if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "moonraker.service")" ] || [ "$(systemctl list-units --full -all -t service --no-legend | grep -E "moonraker-[[:digit:]].service")" ]; then
ok_msg "Moonraker service found!"; echo
MOONRAKER_SERVICE_FOUND="true"
else
warn_msg "Moonraker service not found!"
warn_msg "Please install Moonraker first!"; echo
MOONRAKER_SERVICE_FOUND="false"
fi
}
get_user_selection_kiauh_macros(){
#ask user for webui default macros
while true; do
unset ADD_KIAUH_MACROS
echo
top_border
echo -e "| It is recommended to have some important macros set |"
echo -e "| up in your printer configuration to have $1|"
echo -e "| fully functional and working. |"
blank_line
echo -e "| Those macros are: |"
echo -e "| ${cyan}● [gcode_macro PAUSE]${default} |"
echo -e "| ${cyan}● [gcode_macro RESUME]${default} |"
echo -e "| ${cyan}● [gcode_macro CANCEL_PRINT]${default} |"
blank_line
echo -e "| If you already have these macros in your config file |"
echo -e "| you can skip this step and choose 'no'. |"
echo -e "| Otherwise you should consider to answer with 'yes' to |"
echo -e "| add the recommended example macros to your config. |"
bottom_border
read -p "${cyan}###### Add the recommended macros? (Y/n):${default} " yn
case "$yn" in
Y|y|Yes|yes|"")
echo -e "###### > Yes"
ADD_KIAUH_MACROS="true"
break;;
N|n|No|no)
echo -e "###### > No"
ADD_KIAUH_MACROS="false"
break;;
*)
print_unkown_cmd
print_msg && clear_msg;;
esac
done
}
install_mainsail(){
### check if moonraker is already installed
check_moonraker
if [ "$MOONRAKER_SERVICE_FOUND" = "true" ]; then
### check for other enabled web interfaces
unset SET_LISTEN_PORT
detect_enabled_sites
### check if another site already listens to port 80
mainsail_port_check
### ask user to install the recommended webinterface macros
get_user_selection_kiauh_macros "Mainsail "
### creating the mainsail nginx cfg
set_nginx_cfg "mainsail"
### copy the kiauh_macros.cfg to the config location
install_kiauh_macros
### install mainsail
mainsail_setup
fi
}
install_fluidd(){
### check if moonraker is already installed
check_moonraker
if [ "$MOONRAKER_SERVICE_FOUND" = "true" ]; then
### check for other enabled web interfaces
unset SET_LISTEN_PORT
detect_enabled_sites
### check if another site already listens to port 80
fluidd_port_check
### ask user to install the recommended webinterface macros
get_user_selection_kiauh_macros "Fluidd "
### creating the fluidd nginx cfg
set_nginx_cfg "fluidd"
### copy the kiauh_macros.cfg to the config location
install_kiauh_macros
### install fluidd
fluidd_setup
fi
}
install_kiauh_macros(){
source_kiauh_ini
### copy kiauh_macros.cfg
if [ "$ADD_KIAUH_MACROS" = "true" ]; then
### create a backup of the config folder
backup_klipper_config_dir
### handle single printer.cfg
if [ -f $klipper_cfg_loc/printer.cfg ] && [ ! -f $klipper_cfg_loc/kiauh_macros.cfg ]; then
### copy kiauh_macros.cfg to config location
cp ${SRCDIR}/kiauh/resources/kiauh_macros.cfg $klipper_cfg_loc
ok_msg "$klipper_cfg_loc/kiauh_macros.cfg created!"
### write the include to the very first line of the printer.cfg
sed -i "1 i [include kiauh_macros.cfg]" $klipper_cfg_loc/printer.cfg
fi
### handle multi printer.cfg
if ls $klipper_cfg_loc/printer_* 2>/dev/null 1>&2; then
for config in $(find $klipper_cfg_loc/printer_*/printer.cfg); do
path=$(echo $config | rev | cut -d"/" -f2- | rev)
if [ ! -f $path/kiauh_macros.cfg ]; then
### copy kiauh_macros.cfg to config location
cp ${SRCDIR}/kiauh/resources/kiauh_macros.cfg $path
ok_msg "$path/kiauh_macros.cfg created!"
### write the include to the very first line of the printer.cfg
sed -i "1 i [include kiauh_macros.cfg]" $path/printer.cfg
fi
done
fi
### restart klipper service to parse the modified printer.cfg
klipper_service "restart"
fi
}
mainsail_port_check(){
if [ "$MAINSAIL_ENABLED" = "false" ]; then
if [ "$SITE_ENABLED" = "true" ]; then
status_msg "Detected other enabled interfaces:"
[ "$OCTOPRINT_ENABLED" = "true" ] && echo -e " ${cyan}● OctoPrint - Port: $OCTOPRINT_PORT${default}"
[ "$FLUIDD_ENABLED" = "true" ] && echo -e " ${cyan}● Fluidd - Port: $FLUIDD_PORT${default}"
[ "$DWC2_ENABLED" = "true" ] && echo -e " ${cyan}● DWC2 - Port: $DWC2_PORT${default}"
if [ "$FLUIDD_PORT" = "80" ] || [ "$DWC2_PORT" = "80" ] || [ "$OCTOPRINT_PORT" = "80" ]; then
PORT_80_BLOCKED="true"
select_mainsail_port
fi
else
DEFAULT_PORT=$(grep listen ${SRCDIR}/kiauh/resources/klipper_webui_nginx.cfg | head -1 | sed 's/^\s*//' | cut -d" " -f2 | cut -d";" -f1)
SET_LISTEN_PORT=$DEFAULT_PORT
fi
SET_NGINX_CFG="true"
else
SET_NGINX_CFG="false"
fi
}
fluidd_port_check(){
if [ "$FLUIDD_ENABLED" = "false" ]; then
if [ "$SITE_ENABLED" = "true" ]; then
status_msg "Detected other enabled interfaces:"
[ "$OCTOPRINT_ENABLED" = "true" ] && echo " ${cyan}● OctoPrint - Port: $OCTOPRINT_PORT${default}"
[ "$MAINSAIL_ENABLED" = "true" ] && echo " ${cyan}● Mainsail - Port: $MAINSAIL_PORT${default}"
[ "$DWC2_ENABLED" = "true" ] && echo " ${cyan}● DWC2 - Port: $DWC2_PORT${default}"
if [ "$MAINSAIL_PORT" = "80" ] || [ "$DWC2_PORT" = "80" ] || [ "$OCTOPRINT_PORT" = "80" ]; then
PORT_80_BLOCKED="true"
select_fluidd_port
fi
else
DEFAULT_PORT=$(grep listen ${SRCDIR}/kiauh/resources/klipper_webui_nginx.cfg | head -1 | sed 's/^\s*//' | cut -d" " -f2 | cut -d";" -f1)
SET_LISTEN_PORT=$DEFAULT_PORT
fi
SET_NGINX_CFG="true"
else
SET_NGINX_CFG="false"
fi
}
select_mainsail_port(){
if [ "$PORT_80_BLOCKED" = "true" ]; then
echo
top_border
echo -e "| ${red}!!!WARNING!!!${default} |"
echo -e "| ${red}You need to choose a different port for Mainsail!${default} |"
echo -e "| ${red}The following web interface is listening at port 80:${default} |"
blank_line
[ "$OCTOPRINT_PORT" = "80" ] && echo "| ● OctoPrint |"
[ "$FLUIDD_PORT" = "80" ] && echo "| ● Fluidd |"
[ "$DWC2_PORT" = "80" ] && echo "| ● DWC2 |"
blank_line
echo -e "| Make sure you don't choose a port which was already |"
echo -e "| assigned to one of the other webinterfaces and do ${red}NOT${default} |"
echo -e "| use ports in the range of 4750 or above! |"
blank_line
echo -e "| Be aware: there is ${red}NO${default} sanity check for the following |"
echo -e "| input. So make sure to choose a valid port! |"
bottom_border
while true; do
read -p "${cyan}Please enter a new Port:${default} " NEW_PORT
if [ "$NEW_PORT" != "$FLUIDD_PORT" ] && [ "$NEW_PORT" != "$DWC2_PORT" ] && [ "$NEW_PORT" != "$OCTOPRINT_PORT" ]; then
echo "Setting port $NEW_PORT for Mainsail!"
SET_LISTEN_PORT=$NEW_PORT
break
else
echo "That port is already taken! Select a different one!"
fi
done
fi
}
select_fluidd_port(){
if [ "$PORT_80_BLOCKED" = "true" ]; then
echo
top_border
echo -e "| ${red}!!!WARNING!!!${default} |"
echo -e "| ${red}You need to choose a different port for Fluidd!${default} |"
echo -e "| ${red}The following web interface is listening at port 80:${default} |"
blank_line
[ "$OCTOPRINT_PORT" = "80" ] && echo "| ● OctoPrint |"
[ "$MAINSAIL_PORT" = "80" ] && echo "| ● Mainsail |"
[ "$DWC2_PORT" = "80" ] && echo "| ● DWC2 |"
blank_line
echo -e "| Make sure you don't choose a port which was already |"
echo -e "| assigned to one of the other webinterfaces and do ${red}NOT${default} |"
echo -e "| use ports in the range of 4750 or above! |"
blank_line
echo -e "| Be aware: there is ${red}NO${default} sanity check for the following |"
echo -e "| input. So make sure to choose a valid port! |"
bottom_border
while true; do
read -p "${cyan}Please enter a new Port:${default} " NEW_PORT
if [ "$NEW_PORT" != "$MAINSAIL_PORT" ] && [ "$NEW_PORT" != "$DWC2_PORT" ] && [ "$NEW_PORT" != "$OCTOPRINT_PORT" ]; then
echo "Setting port $NEW_PORT for Fluidd!"
SET_LISTEN_PORT=$NEW_PORT
break
else
echo "That port is already taken! Select a different one!"
fi
done
fi
}
get_mainsail_ver(){
MAINSAIL_VERSION=$(curl -s https://api.github.com/repositories/240875926/releases | grep tag_name | cut -d'"' -f4 | head -1)
}
get_fluidd_ver(){
FLUIDD_VERSION=$(curl -s https://api.github.com/repositories/295836951/releases | grep tag_name | cut -d'"' -f4 | head -1)
}
mainsail_setup(){
### get mainsail download url
MAINSAIL_DL_URL=$(curl -s https://api.github.com/repositories/240875926/releases | grep browser_download_url | cut -d'"' -f4 | head -1)
### remove existing and create fresh mainsail folder, then download mainsail
[ -d $MAINSAIL_DIR ] && rm -rf $MAINSAIL_DIR
mkdir $MAINSAIL_DIR && cd $MAINSAIL_DIR
status_msg "Downloading Mainsail $MAINSAIL_VERSION ..."
wget $MAINSAIL_DL_URL && ok_msg "Download complete!"
### extract archive
status_msg "Extracting archive ..."
unzip -q -o *.zip && ok_msg "Done!"
### delete downloaded zip
status_msg "Remove downloaded archive ..."
rm -rf *.zip && ok_msg "Done!" && ok_msg "Mainsail installation complete!"
echo
}
fluidd_setup(){
### get fluidd download url
FLUIDD_DL_URL=$(curl -s https://api.github.com/repositories/295836951/releases/latest | grep browser_download_url | cut -d'"' -f4)
### remove existing and create fresh fluidd folder, then download fluidd
[ -d $FLUIDD_DIR ] && rm -rf $FLUIDD_DIR
mkdir $FLUIDD_DIR && cd $FLUIDD_DIR
status_msg "Downloading Fluidd $FLUIDD_VERSION ..."
wget $FLUIDD_DL_URL && ok_msg "Download complete!"
### extract archive
status_msg "Extracting archive ..."
unzip -q -o *.zip && ok_msg "Done!"
### delete downloaded zip
status_msg "Remove downloaded archive ..."
rm -rf *.zip && ok_msg "Done!" && ok_msg "Fluidd installation complete!"
echo
}
Reference in New Issue View Git Blame Copy Permalink