README: Update KlipperScreen link and contributor name (#753 )

Update KlipperScreen link and contributor name update maintainer for klipperscreen
feat(gcode_shell_command): allowing for expanding env vars (#747 )
2025-12-14 19:14:27 +05:00 · 2025-11-30 17:42:36 +01:00 · 2025-11-23 12:53:52 +01:00 · 2025-11-23 09:25:05 +01:00 · 2025-11-09 11:58:03 +01:00 · 2025-10-28 12:12:36 +01:00
120 changed files with 1990 additions and 11614 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -10,3 +10,4 @@ __pycache__
 *.code-workspace
 *.iml
 kiauh.cfg
+klipper_repos.txt
--- a/.shellcheckrc
+++ b/.shellcheckrc
@@ -1,15 +0,0 @@
-source=scripts
-
-enable=avoid-nullary-conditions
-enable=deprecate-which
-enable=quote-safe-variables
-enable=require-variable-braces
-enable=require-double-brackets
-
-# SC2162: `read` without `-r` will mangle backslashes.
-# https://github.com/koalaman/shellcheck/wiki/SC2162
-disable=SC2162
-
-# SC2164: Use `cd ... || exit` in case `cd` fails
-# https://github.com/koalaman/shellcheck/wiki/SC2164
-disable=SC2164
--- a/README.md
+++ b/README.md
@@ -1,8 +1,6 @@
 <p align="center">
-  <a>
-    <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/kiauh.png" alt="KIAUH logo" height="181">
+    <img src="docs/assets/logo-large.png" alt="KIAUH Logo" height="181">
    <h1 align="center">Klipper Installation And Update Helper</h1>
-  </a>
 </p>

 <p align="center">
@@ -27,75 +25,100 @@
 </h2>

 ### 📋 Prerequisites
-KIAUH is a script that assists you in installing Klipper on a Linux operating system that has
-already been flashed to your Raspberry Pi's (or other SBC's) SD card. As a result, you must ensure
-that you have a functional Linux system on hand. `Raspberry Pi OS Lite (either 32bit or 64bit)` is a recommended Linux image
-if you are using a Raspberry Pi. The [official Raspberry Pi Imager](https://www.raspberrypi.com/software/)
+
+KIAUH is a script that assists you in installing Klipper on a Linux operating
+system that has
+already been flashed to your Raspberry Pi's (or other SBC's) SD card. As a
+result, you must ensure
+that you have a functional Linux system on hand.
+`Raspberry Pi OS Lite (either 32bit or 64bit)` is a recommended Linux image
+if you are using a Raspberry Pi.
+The [official Raspberry Pi Imager](https://www.raspberrypi.com/software/)
 is the simplest way to flash an image like this to an SD card.

 * Once you have downloaded, installed and launched the Raspberry Pi Imager,
-select `Choose OS -> Raspberry Pi OS (other)`: \
+  select `Choose OS -> Raspberry Pi OS (other)`: \
+
 <p align="center">
-  <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/rpi_imager1.png" alt="KIAUH logo" height="350">
+  <img src="docs/assets/rpi_imager1.png" alt="KIAUH logo" height="350">
 </p>

-* Then select `Raspberry Pi OS Lite (32bit)` (or 64bit if you want to use that instead):
+* Then select `Raspberry Pi OS Lite (32bit)` (or 64bit if you want to use that
+  instead):
+
 <p align="center">
-  <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/rpi_imager2.png" alt="KIAUH logo" height="350">
+  <img src="docs/assets/rpi_imager2.png" alt="KIAUH logo" height="350">
 </p>

-* Back in the Raspberry Pi Imager's main menu, select the corresponding SD card to which
-you want to flash the image.
+* Back in the Raspberry Pi Imager's main menu, select the corresponding SD card
+  to which
+  you want to flash the image.

-* Make sure to go into the Advanced Option (the cog icon in the lower left corner of the main menu)
-and enable SSH and configure Wi-Fi.
+* Make sure to go into the Advanced Option (the cog icon in the lower left
+  corner of the main menu)
+  and enable SSH and configure Wi-Fi.

-* If you need more help for using the Raspberry Pi Imager, please visit the [official documentation](https://www.raspberrypi.com/documentation/computers/getting-started.html).
+* If you need more help for using the Raspberry Pi Imager, please visit
+  the [official documentation](https://www.raspberrypi.com/documentation/computers/getting-started.html).

-These steps **only** apply if you are actually using a Raspberry Pi. In case you want
-to use a different SBC (like an Orange Pi or any other Pi derivates), please look up on how to get an appropriate Linux image flashed
-to the SD card before proceeding further (usually done with Balena Etcher in those cases). Also make sure that KIAUH will be able to run
-and operate on the Linux Distribution you are going to flash. You likely will have the most success with
-distributions based on Debian 11 Bullseye. Read the notes further down below in this document.
+These steps **only** apply if you are actually using a Raspberry Pi. In case you
+want
+to use a different SBC (like an Orange Pi or any other Pi derivates), please
+look up on how to get an appropriate Linux image flashed
+to the SD card before proceeding further (usually done with Balena Etcher in
+those cases). Also make sure that KIAUH will be able to run
+and operate on the Linux Distribution you are going to flash. You likely will
+have the most success with
+distributions based on Debian 11 Bullseye. Read the notes further down below in
+this document.

 ### 💾 Download and use KIAUH
+
 **📢 Disclaimer: Usage of this script happens at your own risk!**

 * **Step 1:** \
-To download this script, it is necessary to have git installed. If you don't have git already installed, or if you are unsure, run the following command:
+  To download this script, it is necessary to have git installed. If you don't
+  have git already installed, or if you are unsure, run the following command:
+
 ```shell
 sudo apt-get update && sudo apt-get install git -y
 ```

 * **Step 2:** \
-Once git is installed, use the following command to download KIAUH into your home-directory:
+  Once git is installed, use the following command to download KIAUH into your
+  home-directory:

 ```shell
 cd ~ && git clone https://github.com/dw-0/kiauh.git
 ```

 * **Step 3:** \
-Finally, start KIAUH by running the next command:
+  Finally, start KIAUH by running the next command:

 ```shell
 ./kiauh/kiauh.sh
 ```

 * **Step 4:** \
-You should now find yourself in the main menu of KIAUH. You will see several actions to choose from depending
-on what you want to do. To choose an action, simply type the corresponding number into the "Perform action"
-prompt and confirm by hitting ENTER.
+  You should now find yourself in the main menu of KIAUH. You will see several
+  actions to choose from depending
+  on what you want to do. To choose an action, simply type the corresponding
+  number into the "Perform action"
+  prompt and confirm by hitting ENTER.

 <hr>

 <h2 align="center">❗ Notes ❗</h2>

-### **📋 Please see the [Changelog](docs/changelog.md) for possible important changes!**
+### **📋 Please see the [Changelog](docs/changelog.md) for possible important
+
+changes!**

 - Mainly tested on Raspberry Pi OS Lite (Debian 10 Buster / Debian 11 Bullseye)
    - Other Debian based distributions (like Ubuntu 20 to 22) likely work too
    - Reported to work on Armbian as well but not tested in detail
- During the use of this script you will be asked for your sudo password. There are several functions involved which need sudo privileges.
+- During the use of this script you will be asked for your sudo password. There
+  are several functions involved which need sudo privileges.

 <hr>

@@ -120,7 +143,7 @@ prompt and confirm by hitting ENTER.

 <tr>
    <th><h3><a href="https://github.com/fluidd-core/fluidd">Fluidd</a></h3></th>
-    <th><h3><a href="https://github.com/jordanruthe/KlipperScreen">KlipperScreen</a></h3></th>
+    <th><h3><a href="https://github.com/KlipperScreen/KlipperScreen">KlipperScreen</a></h3></th>
    <th><h3><a href="https://github.com/OctoPrint/OctoPrint">OctoPrint</a></h3></th>
 </tr>
 <tr>
@@ -130,7 +153,7 @@ prompt and confirm by hitting ENTER.
 </tr>
 <tr>
    <th>by <a href="https://github.com/fluidd-core">fluidd-core</a></th>
-    <th>by <a href="https://github.com/jordanruthe">jordanruthe</a></th>
+    <th>by <a href="https://github.com/alfrix">alfrix</a></th>
    <th>by <a href="https://github.com/OctoPrint">OctoPrint</a></th>
 </tr>

@@ -200,13 +223,17 @@ prompt and confirm by hitting ENTER.

 <h2 align="center">✨ Credits ✨</h2>

-* A big thank you to [lixxbox](https://github.com/lixxbox) for that awesome KIAUH-Logo!
-* Also, a big thank you to everyone who supported my work with a [Ko-fi](https://ko-fi.com/dw__0) !
-* Last but not least: Thank you to all contributors and members of the Klipper Community who like and share this project!
+* A big thank you to [lixxbox](https://github.com/lixxbox) for that awesome
+  KIAUH-Logo!
+* Also, a big thank you to everyone who supported my work with
+  a [Ko-fi](https://ko-fi.com/dw__0) !
+* Last but not least: Thank you to all contributors and members of the Klipper
+  Community who like and share this project!

 <hr>

-<h4 align="center">A special thank you to JetBrains for sponsoring this project with their incredible software!</h4>
+<h4 align="center">A special thank you to JetBrains for sponsoring this project
+with their incredible software!</h4>
 <p align="center">
  <a href="https://www.jetbrains.com/community/opensource/#support" target="_blank">
    <img src="https://resources.jetbrains.com/storage/products/company/brand/logos/jb_beam.png" alt="JetBrains Logo (Main) logo." height="128">
--- a/docs/assets/logo-large.png
+++ b/docs/assets/logo-large.png
--- a/resources/screenshots/kiauh.png
+++ b/resources/screenshots/kiauh.png
--- a/resources/screenshots/rpi_imager1.png
+++ b/resources/screenshots/rpi_imager1.png
--- a/resources/screenshots/rpi_imager2.png
+++ b/resources/screenshots/rpi_imager2.png
--- a/docs/changelog.md
+++ b/docs/changelog.md
@@ -2,27 +2,64 @@

 This document covers possible important changes to KIAUH.

+### 2025-10-10 (v6.0.0)
+
+KIAUH has now reached version 6! The majority of the changes mentioned in the
+previous changelog are now available in the final version.
+Most notible are the following changes:
+
+- The dialog for selecting between v5 and v6 is gone and all v5 code was
+  removed. V6 is the new default
+- You can add/remove alternative repositories for Klipper and Moonraker from
+  within KIAUH, no need to manually edit any file
+- You can store and load firmware configurations for Klipper during the firmware
+  compilation process
+- Spoolman is available as an extension, it does not use the bare-metal
+  installation anymore, instead it uses the Docker Container approach
+- OctoApp is available as an extension
+- OctoPrint support was NOT killed. OctoPrint is available as an extension
+- I probably forgot to mention some other changes, but the idea is to create
+  official docs for KIAUH where the new changelog will live in the future and
+  available features and mechanics are explained in detail
+
+If you really want to use v5, there is a v5 branch available in the repository.
+Keep in mind that v5 will not be updated anymore.
+
 ### 2024-08-31 (v6.0.0-alpha.1)
+
 Long time no see, but here we are again!
-A lot has happened in the background, but now it is time to take it out into the wild.
+A lot has happened in the background, but now it is time to take it out into the
+wild.

 #### KIAUH has now reached version 6! Well, at least in an alpha state...

 The project has seen a complete rewrite of the script from scratch in Python.
-It requires Python 3.8 or newer to run. Because this update is still in an alpha state, bugs may or will occur.
-During startup, you will be asked if you want to start the new version 6 or the old version 5.
-As long as version 6 is in a pre-release state, version 5 will still be available. If there are any critical issues
-with the new version that were overlooked, you can always switch back to the old version.
+It requires Python 3.8 or newer to run. Because this update is still in an alpha
+state, bugs may or will occur.
+During startup, you will be asked if you want to start the new version 6 or the
+old version 5.
+As long as version 6 is in a pre-release state, version 5 will still be
+available. If there are any critical issues
+with the new version that were overlooked, you can always switch back to the old
+version.

-In case you selected not to get asked about which version to start (option 3 or 4 in the startup dialog) and you want to
-revert that decision, you will find a line called `version_to_launch=` within the `.kiauh.ini` file in your home directory.
-Just delete that line, save the file and restart KIAUH. KIAUH will then ask you again which version you want to start.
+In case you selected not to get asked about which version to start (option 3 or
+4 in the startup dialog) and you want to
+revert that decision, you will find a line called `version_to_launch=` within
+the `.kiauh.ini` file in your home directory.
+Just delete that line, save the file and restart KIAUH. KIAUH will then ask you
+again which version you want to start.

 Here is a list of the most important changes to KIAUH in regard to version 6:
- The majority of features available in KIAUH v5 are still available; they just got migrated from Bash to Python.
- It is now possible to add new/remove instances to/from existing multi-instance installations of Klipper and Moonraker
- KIAUH now has an Extension-System. This allows contributors to add new installers to KIAUH without having to modify the main script.
-    - You will now find some of the features that were previously available in the Installer-Menu in the Extensions-Menu.
+
+- The majority of features available in KIAUH v5 are still available; they just
+  got migrated from Bash to Python.
+- It is now possible to add new/remove instances to/from existing multi-instance
+  installations of Klipper and Moonraker
+- KIAUH now has an Extension-System. This allows contributors to add new
+  installers to KIAUH without having to modify the main script.
+    - You will now find some of the features that were previously available in
+      the Installer-Menu in the Extensions-Menu.
    - The current extensions are:
        - G-Code Shell Command (previously found in the Advanced-Menu)
        - Mainsail Theme Installer (previously found in the Advanced-Menu)
@@ -37,193 +74,348 @@ Here is a list of the most important changes to KIAUH in regard to version 6:
    - The file has some default values for the currently supported options
    - There might be more options in the future
    - It is located in KIAUH's root directory and is called `default.kiauh.cfg`
-        - DO NOT EDIT the default file directly, instead make a copy of it and call it `kiauh.cfg`
-        - Settings changed via the Advanced-Menu will be written to the `kiauh.cfg`
+        - DO NOT EDIT the default file directly, instead make a copy of it and
+          call it `kiauh.cfg`
+        - Settings changed via the Advanced-Menu will be written to the
+          `kiauh.cfg`
 - Support for OctoPrint was removed

-Feel free to give version 6 a try and report any bugs or issues you encounter! Every feedback is appreciated.
+Feel free to give version 6 a try and report any bugs or issues you encounter!
+Every feedback is appreciated.

 ### 2023-06-17
+
 KIAUH has now added support for installing Mobileraker's companion!
-Mobileraker is a free and Open Source Android and iOS App for Klipper, utilizing the Moonraker API, allowing you
-to control your printer. Thank you to [Clon1998](https://github.com/Clon1998) for adding this feature!
+Mobileraker is a free and Open Source Android and iOS App for Klipper, utilizing
+the Moonraker API, allowing you
+to control your printer. Thank you to [Clon1998](https://github.com/Clon1998)
+for adding this feature!

 ### 2023-02-03
-The installer for MJPG-Streamer got replaced by crowsnest. It is an improved webcam service, utilizing ustreamer.
-Please have a look here for additional info about crowsnest and how to configure it: https://github.com/mainsail-crew/crowsnest \
-It's unsure if the previous MJPG-Streamer installer will be updated and make its way back into KIAUH.
-A big thanks to [KwadFan](https://github.com/KwadFan) for writing the crowsnest implementation.
+
+The installer for MJPG-Streamer got replaced by crowsnest. It is an improved
+webcam service, utilizing ustreamer.
+Please have a look here for additional info about crowsnest and how to configure
+it: https://github.com/mainsail-crew/crowsnest \
+It's unsure if the previous MJPG-Streamer installer will be updated and make its
+way back into KIAUH.
+A big thanks to [KwadFan](https://github.com/KwadFan) for writing the crowsnest
+implementation.

 ### 2022-10-31
+
 Some functions got updated, though not all of them.

 The following functions are still currently unavailable:
+
 - Installation of: MJPG-Streamer
 - All backup functions and the Log-Upload

 ### 2022-10-20
+
 KIAUH has now reached major version 5 !

-Recently Moonraker introduced some changes which makes it necessary to change the folder structure of printer setups.
-If you are interested in the details, check out this PR: https://github.com/Arksine/moonraker/pull/491 \
-Although Moonraker has some mechanics available to migrate existing setups to the new file structure with the use of symlinks, fresh and clean installs
+Recently Moonraker introduced some changes which makes it necessary to change
+the folder structure of printer setups.
+If you are interested in the details, check out this
+PR: https://github.com/Arksine/moonraker/pull/491 \
+Although Moonraker has some mechanics available to migrate existing setups to
+the new file structure with the use of symlinks, fresh and clean installs
 should be considered.

-The version jump of KIAUH to v5 is a breaking change due to those major changes! That means v4 and v5 are not compatible with each other!
-This is also the reason why you will currently be greeted by a yellow notification in the main menu of KIAUH leading to this changelog.
-I decided to disable a few functions of the script and focus on releasing the required changes to the core components of this script.
-I will work on updating the other parts of the script piece by piece during the next days/weeks.
-So I am already sorry in advance if one of your desired components you wanted to install or use temporarily cannot be installed or used right now.
+The version jump of KIAUH to v5 is a breaking change due to those major changes!
+That means v4 and v5 are not compatible with each other!
+This is also the reason why you will currently be greeted by a yellow
+notification in the main menu of KIAUH leading to this changelog.
+I decided to disable a few functions of the script and focus on releasing the
+required changes to the core components of this script.
+I will work on updating the other parts of the script piece by piece during the
+next days/weeks.
+So I am already sorry in advance if one of your desired components you wanted to
+install or use temporarily cannot be installed or used right now.

 The following functions are currently unavailable:
- Installation of: KlipperScreen, Obico, Octoprint, MJPG-Streamer, Telegram Bot and PrettyGCode
+
+- Installation of: KlipperScreen, Obico, Octoprint, MJPG-Streamer, Telegram Bot
+  and PrettyGCode
 - All backup functions and the Log-Upload

 **So what is working?**\
-Installation of Klipper, Moonraker, Mainsail and Fluidd. Both, single and multi-instance setups work!\
-As already said, the rest will follow in the near future. Updating and removal of already installed components should continue to work.
+Installation of Klipper, Moonraker, Mainsail and Fluidd. Both, single and
+multi-instance setups work!\
+As already said, the rest will follow in the near future. Updating and removal
+of already installed components should continue to work.

 **What was removed?**\
-The option to change Klippers configuration directory got removed. From now on it will not be possible anymore to change
-the configuration directory from within KIAUH and the new filestructure is enforced.
+The option to change Klippers configuration directory got removed. From now on
+it will not be possible anymore to change
+the configuration directory from within KIAUH and the new filestructure is
+enforced.

 **What if I don't have an existing Klipper/Moonraker install right now?**\
-Nothing important to think about, install Klipper and Moonraker. KIAUH will install both of them with the new filestructure.
+Nothing important to think about, install Klipper and Moonraker. KIAUH will
+install both of them with the new filestructure.

 **What if I have an existing Klipper/Moonraker install?**\
-First of all: Backups! Please copy all of your config files and the Moonraker database (it is a hidden folder, usually `~/.moonraker_database`) to a safe location.
-After that, uninstall Klipper and Moonraker with KIAUH. You can then proceed and re-install both of them with KIAUH again. It is important that you are on KIAUH v5 for that!
-Once everything is installed again, you need to manually copy your configuration files from the old `~/klipper_config` folder to the new `~/printer_data/config` folder.
-Previous, by Moonraker created symlinks to folder of the old filestructure will not work anymore, you need to move the files to their new location now!
-Do the same with the two files inside of `~/.moonraker_database`. Move/copy them into `~/printer_data/database`. If `~/printer_data/database` is already populated with a `data.mdb` and `lock.mdb`
-delete them or simply overwrite them. Nothing should be lost as those should be empty database files. Anyway, you made backups, right?
-You can now proceed and restart Moonraker. Either from within Mainsail or Fluidd, or use SSH and execute `sudo systemctl restart moonraker`.
-If everything went smooth, you should be good to go again. If you see some Moonraker warnings about deprecated options in the `moonraker.conf`, go ahead and resolve them.
-I will not cover them in detail here. A good source is the Moonraker documentation: https://moonraker.readthedocs.io/en/latest/configuration/
+First of all: Backups! Please copy all of your config files and the Moonraker
+database (it is a hidden folder, usually `~/.moonraker_database`) to a safe
+location.
+After that, uninstall Klipper and Moonraker with KIAUH. You can then proceed and
+re-install both of them with KIAUH again. It is important that you are on KIAUH
+v5 for that!
+Once everything is installed again, you need to manually copy your configuration
+files from the old `~/klipper_config` folder to the new `~/printer_data/config`
+folder.
+Previous, by Moonraker created symlinks to folder of the old filestructure will
+not work anymore, you need to move the files to their new location now!
+Do the same with the two files inside of `~/.moonraker_database`. Move/copy them
+into `~/printer_data/database`. If `~/printer_data/database` is already
+populated with a `data.mdb` and `lock.mdb`
+delete them or simply overwrite them. Nothing should be lost as those should be
+empty database files. Anyway, you made backups, right?
+You can now proceed and restart Moonraker. Either from within Mainsail or
+Fluidd, or use SSH and execute `sudo systemctl restart moonraker`.
+If everything went smooth, you should be good to go again. If you see some
+Moonraker warnings about deprecated options in the `moonraker.conf`, go ahead
+and resolve them.
+I will not cover them in detail here. A good source is the Moonraker
+documentation: https://moonraker.readthedocs.io/en/latest/configuration/

 **What if I have an existing Klipper/Moonraker multi-instance install?**\
-Pretty much the same steps that are required for single instance installs apply to multi-instance setups. So please go ahead and read the previous paragraph if you didn't already.
-Make backups of everything first. Then remove and install the desired amount of Klipper and Moonraker instances again.
+Pretty much the same steps that are required for single instance installs apply
+to multi-instance setups. So please go ahead and read the previous paragraph if
+you didn't already.
+Make backups of everything first. Then remove and install the desired amount of
+Klipper and Moonraker instances again.
 Now you need to move all config and database files to their new locations.\
 Example with an instance called `printer_1`:\
-The config files go from `~/klipper_config/printer_1` to `~/printer_1_data/config`.
-The database files go from `~/.moonraker_database_1` to `~/printer_1_data/database`.
-Now restart all Moonraker services. You can restart all of them at once if you launch KIAUH, and in the main menu type `restart moonraker` and hit Enter.
+The config files go from `~/klipper_config/printer_1` to
+`~/printer_1_data/config`.
+The database files go from `~/.moonraker_database_1` to
+`~/printer_1_data/database`.
+Now restart all Moonraker services. You can restart all of them at once if you
+launch KIAUH, and in the main menu type `restart moonraker` and hit Enter.

-I hope I have covered the most important things. In case you need further support, the official Klipper Discord is a good place to ask for help.
+I hope I have covered the most important things. In case you need further
+support, the official Klipper Discord is a good place to ask for help.

 ### 2022-08-15
-Support for "Obico for Klipper" was added! Huge thanks to [kennethjiang](https://github.com/kennethjiang) for helping me with the implementation!
+
+Support for "Obico for Klipper" was added! Huge thanks
+to [kennethjiang](https://github.com/kennethjiang) for helping me with the
+implementation!

 ### 2022-05-29
+
 KIAUH has now reached major version 4 !
-* feat: Klipper can be installed under Python3 (still considered as experimental)
+
+* feat: Klipper can be installed under Python3 (still considered as
+  experimental)
 * feat: Klipper can be installed from custom repositories / inofficial forks
 * feat: Custom instance name for multi instance installations of Klipper
-  * Any other multi instance will share the same name given to the corresponding Klipper instance
-  * E.g. klipper-voron2 -> moonraker-voron2 -> moonraker-telegram-bot-voron2
-* feat: Option to allow installation of / updating to unstable Mainsail and Fluidd versions
-  * by default only stable versions get installed/updated
-* feat: Multi-Instance OctoPrint installations now each have their own virtual python environment
-  * allows independent installation of plugins for each instance
+    * Any other multi instance will share the same name given to the
+      corresponding Klipper instance
+    * E.g. klipper-voron2 -> moonraker-voron2 -> moonraker-telegram-bot-voron2
+* feat: Option to allow installation of / updating to unstable Mainsail and
+  Fluidd versions
+    * by default only stable versions get installed/updated
+* feat: Multi-Instance OctoPrint installations now each have their own virtual
+  python environment
+    * allows independent installation of plugins for each instance
 * feat: Implementing the use of shellcheck during development
 * feat: Implementing a simple logging mechanic
-* feat: Log-upload function now also allows uploading other logfiles (kiauh.log, webcamd.log etc.)
+* feat: Log-upload function now also allows uploading other logfiles (kiauh.log,
+  webcamd.log etc.)
 * feat: added several new help dialogs which try to explain various functions
-* fix: During Klipper installation, checks for group membership of `tty` and `dialout` are made
-* refactor: rework of the settings menu for better control the new KIAUH features
+* fix: During Klipper installation, checks for group membership of `tty` and
+  `dialout` are made
+* refactor: rework of the settings menu for better control the new KIAUH
+  features
 * refactor: Support for DWC and DWC-for-Klipper has been removed
-* refactor: The backup before update settings were moved to the KIAUH settings menu
-* refactor: Switch branch function has been removed (was replaced by the custom Klipper repo feature)
-* refactor: The update manager sections for Mainsail, Fluidd and KlipperScreen were removed from the moonraker.conf template
-  * They will now be individually added during installation of the corresponding interface
-* refactor: The rollback function was reworked and now also allows rollbacks of Moonraker
-  * It now takes numerical inputs and reverts the corresponding repository by the given amount instead
-  * KIAUH does not save previous states to its config anymore like it did with the previous approach
-
+* refactor: The backup before update settings were moved to the KIAUH settings
+  menu
+* refactor: Switch branch function has been removed (was replaced by the custom
+  Klipper repo feature)
+* refactor: The update manager sections for Mainsail, Fluidd and KlipperScreen
+  were removed from the moonraker.conf template
+    * They will now be individually added during installation of the
+      corresponding interface
+* refactor: The rollback function was reworked and now also allows rollbacks of
+  Moonraker
+    * It now takes numerical inputs and reverts the corresponding repository by
+      the given amount instead
+    * KIAUH does not save previous states to its config anymore like it did with
+      the previous approach

 ### 2022-01-29
-* Starting from the 28th of January, Moonraker can make use of PackageKit and PolicyKit.\
-More details on that can be found [here](
-https://github.com/Arksine/moonraker/issues/349) and [here](https://github.com/Arksine/moonraker/pull/346)
-* KIAUH will install Moonrakers PolicyKit rules by default when __installing__ Moonraker
-* KIAUH will also install Moonrakers PolicyKit rules when __updating__ Moonraker __via KIAUH__ as of now
+
+* Starting from the 28th of January, Moonraker can make use of PackageKit and
+  PolicyKit.\
+  More details on that can be found [here](
+  https://github.com/Arksine/moonraker/issues/349)
+  and [here](https://github.com/Arksine/moonraker/pull/346)
+* KIAUH will install Moonrakers PolicyKit rules by default when __installing__
+  Moonraker
+* KIAUH will also install Moonrakers PolicyKit rules when __updating__ Moonraker
+  __via KIAUH__ as of now

 ### 2021-12-30
-* Updated the doc for the usage of the [G-Code Shell Command Extension](docs/gcode_shell_command.md)
-* It became apparent, that some user groups are missing on some systems. A missing video group \
-membership for example caused issues when installing mjpg-streamer while not using the default pi user. \
-Other issues could occur when trying to flash an MCU on Debian or Ubuntu distributions where a user might not be part
-of the dialout group by default. A check for the tty group is also done. The tty group is needed for setting
-up a linux MCU (currently not yet supported by KIAUH).
-* There is an issue when trying to install Mainsail or Fluidd on Ubuntu 21.10. Permissions on that distro seem to have seen a rework
- in comparison to 20.04 and users will be greeted with an "Error 403 - Permission denied" message after installing one of Klippers webinterfaces.
-I still have to figure out a viable solution for that.
+
+* Updated the doc for the usage of
+  the [G-Code Shell Command Extension](docs/gcode_shell_command.md)
+* It became apparent, that some user groups are missing on some systems. A
+  missing video group \
+  membership for example caused issues when installing mjpg-streamer while not
+  using the default pi user. \
+  Other issues could occur when trying to flash an MCU on Debian or Ubuntu
+  distributions where a user might not be part
+  of the dialout group by default. A check for the tty group is also done. The
+  tty group is needed for setting
+  up a linux MCU (currently not yet supported by KIAUH).
+* There is an issue when trying to install Mainsail or Fluidd on Ubuntu 21.10.
+  Permissions on that distro seem to have seen a rework
+  in comparison to 20.04 and users will be greeted with an "Error 403 -
+  Permission denied" message after installing one of Klippers webinterfaces.
+  I still have to figure out a viable solution for that.

 ### 2021-09-28
-* New Feature! Added an installer for the Telegram Bot for Moonraker by [nlef](https://github.com/nlef).
-Checkout his project! Remember to report all issues and/or bugs regarding that project in its corresponding repo and not here 😛.\
-You can find it here: https://github.com/nlef/moonraker-telegram-bot
+
+* New Feature! Added an installer for the Telegram Bot for Moonraker
+  by [nlef](https://github.com/nlef).
+  Checkout his project! Remember to report all issues and/or bugs regarding that
+  project in its corresponding repo and not here 😛.\
+  You can find it here: https://github.com/nlef/moonraker-telegram-bot

 ### 2021-09-24
-* The flashing function got adjusted a bit. It is now possible to also flash controllers which are connected over UART and thus accessible via `/dev/ttyAMA0`. You now have to select a connection methop prior flashing which is either USB or UART.
-* Due to several requests over time I have now created a Ko-fi account for those who want to support this project and my work with a small donation. Many thanks in advance to all future donors. You can support me on Ko-fi with this link: https://ko-fi.com/th33xitus
-* As usual, if you find any bugs or issues please report them. I tested the little rework i did with the hardware i have available and haven't encountered any malfunctions of flashing them yet.
+
+* The flashing function got adjusted a bit. It is now possible to also flash
+  controllers which are connected over UART and thus accessible via
+  `/dev/ttyAMA0`. You now have to select a connection methop prior flashing
+  which is either USB or UART.
+* Due to several requests over time I have now created a Ko-fi account for those
+  who want to support this project and my work with a small donation. Many
+  thanks in advance to all future donors. You can support me on Ko-fi with this
+  link: https://ko-fi.com/th33xitus
+* As usual, if you find any bugs or issues please report them. I tested the
+  little rework i did with the hardware i have available and haven't encountered
+  any malfunctions of flashing them yet.

 ### 2021-08-10
-* KIAUH now supports the installation of the "PrettyGCode for Klipper" GCode-Viewer created by [Kragrathea](https://github.com/Kragrathea)! Installation, updating and removal are possible with KIAUH. For more details to this cool piece of software, please have a look here: https://github.com/Kragrathea/pgcode
+
+* KIAUH now supports the installation of the "PrettyGCode for Klipper"
+  GCode-Viewer created by [Kragrathea](https://github.com/Kragrathea)!
+  Installation, updating and removal are possible with KIAUH. For more details
+  to this cool piece of software, please have a look
+  here: https://github.com/Kragrathea/pgcode

 ### 2021-07-10
-* The NGINX configuration files got updated to be in sync with MainsailOS and FluiddPi. Issues with the NGINX service not starting up due to wrong configuration should be resolved now. To get the updated configuration files, please remove Moonraker and Mainsail / Fluidd with KIAUH first and then re-install it. An automated file check for those configuration files might follow in the future which then automates updating those files if there were important changes.

-* The default `moonraker.conf` was updated to reflect the recent changes to the update manager section. The update channel is set to `dev`.
+* The NGINX configuration files got updated to be in sync with MainsailOS and
+  FluiddPi. Issues with the NGINX service not starting up due to wrong
+  configuration should be resolved now. To get the updated configuration files,
+  please remove Moonraker and Mainsail / Fluidd with KIAUH first and then
+  re-install it. An automated file check for those configuration files might
+  follow in the future which then automates updating those files if there were
+  important changes.
+
+* The default `moonraker.conf` was updated to reflect the recent changes to the
+  update manager section. The update channel is set to `dev`.

 ### 2021-06-29
-* KIAUH will now patch the new `log_path` to existing moonraker.conf files when updating Moonraker and the entry is missing. Before that, it was necessary that the user provided that path manually to make Fluidd display the logfiles in its interface. This issue should be resolved now.
+
+* KIAUH will now patch the new `log_path` to existing moonraker.conf files when
+  updating Moonraker and the entry is missing. Before that, it was necessary
+  that the user provided that path manually to make Fluidd display the logfiles
+  in its interface. This issue should be resolved now.

 ### 2021-06-15

-* Moonraker introduced an optional `log_path` which clients can make use of to show log files located in that folder to their users. More info here: https://github.com/Arksine/moonraker/commit/829b3a4ee80579af35dd64a37ccc092a1f67682a \
-Client developers agreed upon using `~/klipper_logs` as the new default log path.\
-That means, from now on, Klipper and Moonraker services installed with KIAUH will place their logfiles in that mentioned folder.
-* Additionally, KIAUH will now detect Klipper and Moonraker systemd services that still use the old default location of `/tmp/<service>.log` and will update them next time the user updates Klipper and/or Moonraker with the KIAUH update function.
-* Additional symlinks for the following logfiles will get created along those update procedures to make them accessible through the webinterface once its supported:
+* Moonraker introduced an optional `log_path` which clients can make use of to
+  show log files located in that folder to their users. More info
+  here: https://github.com/Arksine/moonraker/commit/829b3a4ee80579af35dd64a37ccc092a1f67682a \
+  Client developers agreed upon using `~/klipper_logs` as the new default log
+  path.\
+  That means, from now on, Klipper and Moonraker services installed with KIAUH
+  will place their logfiles in that mentioned folder.
+* Additionally, KIAUH will now detect Klipper and Moonraker systemd services
+  that still use the old default location of `/tmp/<service>.log` and will
+  update them next time the user updates Klipper and/or Moonraker with the KIAUH
+  update function.
+* Additional symlinks for the following logfiles will get created along those
+  update procedures to make them accessible through the webinterface once its
+  supported:
    - webcamd.log
    - mainsail-access.log
    - mainsail-error.log
    - fluidd-access.log
    - fluidd-error.log
 * For MainsailOS and FluiddPi users:\
-MainsailOS and FluiddPi will switch the shipped Klipper service from SysVinit to systemd probably with their next release. KIAUH can already help migrate older MainsailOS (0.4.0 and below) and FluiddPi (v1.13.0) releases to match their new service-, file- and folder-structure so you don't have to re-flash the SD-Card of your Raspberry Pi.\
-In detail here is what is going to happen when you use the new "CustomPiOS Migration Helper" from the Advanced Menu\
-`(Main Menu -> 4 -> Enter -> 10 -> Enter)` in a short summary:
-    * The Klipper SysVinit service will get replaced by a Klipper systemd service
+  MainsailOS and FluiddPi will switch the shipped Klipper service from SysVinit
+  to systemd probably with their next release. KIAUH can already help migrate
+  older MainsailOS (0.4.0 and below) and FluiddPi (v1.13.0) releases to match
+  their new service-, file- and folder-structure so you don't have to re-flash
+  the SD-Card of your Raspberry Pi.\
+  In detail here is what is going to happen when you use the new "CustomPiOS
+  Migration Helper" from the Advanced Menu\
+  `(Main Menu -> 4 -> Enter -> 10 -> Enter)` in a short summary:
+    * The Klipper SysVinit service will get replaced by a Klipper systemd
+      service
    * Klipper and Moonraker will use the new log-directory `~/klipper_logs`
    * The webcamd service gets updated
-    * The webcamd script gets updated and moved from `/root/bin/webcamd` to `/usr/local/bin/webcamd`
-    * The NGINX `upstreams.conf` gets updated to be able to configure up to 4 webcams
-    * The `mainsail.txt` / `fluiddpi.txt` gets moved from `/boot` to `~/klipper_config` and renamed to `webcam.txt`
-    * Symlinks for the webcamd.log and various NGINX logs get created in `~/klipper_config`
-    * Configuration files for Klipper, Moonraker and webcamd get added to `/etc/logrotate.d`
-    * If they still exist, two lines will be removed from the mainsail.cfg or client_macros.cfg macro configurations:\
-    `SAVE_GCODE_STATE NAME=PAUSE_state` and `RESTORE_GCODE_STATE NAME=PAUSE_state`
+    * The webcamd script gets updated and moved from `/root/bin/webcamd` to
+      `/usr/local/bin/webcamd`
+    * The NGINX `upstreams.conf` gets updated to be able to configure up to 4
+      webcams
+    * The `mainsail.txt` / `fluiddpi.txt` gets moved from `/boot` to
+      `~/klipper_config` and renamed to `webcam.txt`
+    * Symlinks for the webcamd.log and various NGINX logs get created in
+      `~/klipper_config`
+    * Configuration files for Klipper, Moonraker and webcamd get added to
+      `/etc/logrotate.d`
+    * If they still exist, two lines will be removed from the mainsail.cfg or
+      client_macros.cfg macro configurations:\
+      `SAVE_GCODE_STATE NAME=PAUSE_state` and
+      `RESTORE_GCODE_STATE NAME=PAUSE_state`
 * **Please note:**\
-The "CustomPiOS Migration Helper" is intended to only work on "vanilla" MainsailOS and FluiddPi systems. Do not try to migrate a modified MainsailOS or FluiddPi system (for example if you already used KIAUH to re-install services or to set up a multi-instance installation for Klipper / Moonraker). This won't work.
+  The "CustomPiOS Migration Helper" is intended to only work on "vanilla"
+  MainsailOS and FluiddPi systems. Do not try to migrate a modified MainsailOS
+  or FluiddPi system (for example if you already used KIAUH to re-install
+  services or to set up a multi-instance installation for Klipper / Moonraker).
+  This won't work.

 ### 2021-01-31

 * **This is a big one... KIAUH v3.0 is out.**\
-With this update you can now install multiple instances of Klipper, Moonraker, Duet Web Control or Octoprint on the same Pi. This was quite a big rework of the whole script. So bugs can appear but with the help of some testers, i think there shouldn't be any critical ones anymore. In this regards thanks to @lixxbox and @zellneralex for testing.
+  With this update you can now install multiple instances of Klipper, Moonraker,
+  Duet Web Control or Octoprint on the same Pi. This was quite a big rework of
+  the whole script. So bugs can appear but with the help of some testers, i
+  think there shouldn't be any critical ones anymore. In this regards thanks to
+  @lixxbox and @zellneralex for testing.

-* Important changes to how installations are set up now: All components get installed as systemd services. Installation via init.d was dropped completely! This shouldn't affect you at all, since the common linux distributions like RaspberryPi OS or custom distributions like MainsailOS, FluiddPi or OctoPi support both ways of installing services. I just wanted to mention it here.
+* Important changes to how installations are set up now: All components get
+  installed as systemd services. Installation via init.d was dropped completely!
+  This shouldn't affect you at all, since the common linux distributions like
+  RaspberryPi OS or custom distributions like MainsailOS, FluiddPi or OctoPi
+  support both ways of installing services. I just wanted to mention it here.

-* Now with KIAUH v3.0 and multi-instance installation capabilities, there are some things to point out. You will now need to tell KIAUH where your printers configurations are located when installing Klipper for the first time. Even though it is not recommended, you can change this location with the help of KIAUH and rewrite Klipper and Moonraker to use the new location.
+* Now with KIAUH v3.0 and multi-instance installation capabilities, there are
+  some things to point out. You will now need to tell KIAUH where your printers
+  configurations are located when installing Klipper for the first time. Even
+  though it is not recommended, you can change this location with the help of
+  KIAUH and rewrite Klipper and Moonraker to use the new location.

-* When setting up a multi-instance system, the folder structure will only change slightly. The goal was to keep it as compatible as possible with the custom distributions like mainsailOS and FluiddPi. This should help converting a single-instance setup of mainsailOS/FluiddPi to a multi-instance setup in no time, but keeping single-instance backwards compatibility if needed at a later point in time.
+* When setting up a multi-instance system, the folder structure will only change
+  slightly. The goal was to keep it as compatible as possible with the custom
+  distributions like mainsailOS and FluiddPi. This should help converting a
+  single-instance setup of mainsailOS/FluiddPi to a multi-instance setup in no
+  time, but keeping single-instance backwards compatibility if needed at a later
+  point in time.

 * The folder structure is as follows when setting up multi-instances:\
-Each printer instance will get its own folder within your configuration location. The decision to this specific structure was made to make it as painless and easy as possible to convert to a multi-instance setup.
-Here is an example:
+  Each printer instance will get its own folder within your configuration
+  location. The decision to this specific structure was made to make it as
+  painless and easy as possible to convert to a multi-instance setup.
+  Here is an example:
    ```shell
    /home/<username>
              └── klipper_config
@@ -237,12 +429,14 @@ Here is an example:
                      ├── printer.cfg
                      └── moonraker.conf
    ```
-* Also when setting up multi-instances of each service, the name of each service slightly changes.
-Each service gets its corresponding instance added to the service filename.
+* Also when setting up multi-instances of each service, the name of each service
+  slightly changes.
+  Each service gets its corresponding instance added to the service filename.

-    **This only applies to multi-instances! Single instance installations with KIAUH will keep their original names!**
+  **This only applies to multi-instances! Single instance installations with
+  KIAUH will keep their original names!**

-    Corresponding to the filetree example from above that would mean:
+  Corresponding to the filetree example from above that would mean:
    ```
    Klipper services:
            --> klipper-1.service
@@ -254,52 +448,102 @@ Each service gets its corresponding instance added to the service filename.
            --> moonraker-2.service
            --> moonraker-n.service
    ```
-* The same service file rules from above apply to OctoPrint even though only Klipper and Moonraker are shown in this example.
+* The same service file rules from above apply to OctoPrint even though only
+  Klipper and Moonraker are shown in this example.

-* You can start, stop and restart all Klipper, Moonraker and OctoPrint instances from the KIAUH main menu. For doing this, just type "stop klipper", "start moonraker", "restart octoprint" and so on.
+* You can start, stop and restart all Klipper, Moonraker and OctoPrint instances
+  from the KIAUH main menu. For doing this, just type "stop klipper", "start
+  moonraker", "restart octoprint" and so on.

-* KIAUH v3.0 relocated its ini-file. It is now a hidden file in the users home-directory calles `.kiauh.ini`. This has the benefit of keeping all values in that file between possible re-installations of KIAUH. Otherwise that file would be lost.
+* KIAUH v3.0 relocated its ini-file. It is now a hidden file in the users
+  home-directory calles `.kiauh.ini`. This has the benefit of keeping all values
+  in that file between possible re-installations of KIAUH. Otherwise that file
+  would be lost.

-* The option of adding more trusted clients to the moonraker.conf file was dropped. Since you can edit this file right inside of Mainsail or Fluidd, only some basic entries are made which get you running.
+* The option of adding more trusted clients to the moonraker.conf file was
+  dropped. Since you can edit this file right inside of Mainsail or Fluidd, only
+  some basic entries are made which get you running.

-* I bet i have missed mentioning other stuff as well because it took me quite some time to re-write many functions. So i just hope you like the new version 😄
+* I bet i have missed mentioning other stuff as well because it took me quite
+  some time to re-write many functions. So i just hope you like the new version
+  😄

 ### 2020-11-28

-* KIAUH now supports the installation, update and removal of [KlipperScreen](https://github.com/jordanruthe/KlipperScreen). This feature was was provided by [jordanruthe](https://github.com/jordanruthe)! Thank you!
+* KIAUH now supports the installation, update and removal
+  of [KlipperScreen](https://github.com/jordanruthe/KlipperScreen). This feature
+  was was provided by [jordanruthe](https://github.com/jordanruthe)! Thank you!

 ### 2020-11-18

-* Some changes to Fluidd caused a little rework on how KIAUH will install/update Fluidd from now on. Please see the [fluidd v1.0.0-rc0 release notes](https://github.com/cadriel/fluidd/releases/tag/v1.0.0-rc.0) for further information about what modifications to the moonraker.conf file exactly had to be done. In a nutshell, KIAUH will now always patch the required entries to the moonraker.conf if not already there.
+* Some changes to Fluidd caused a little rework on how KIAUH will install/update
+  Fluidd from now on. Please see
+  the [fluidd v1.0.0-rc0 release notes](https://github.com/cadriel/fluidd/releases/tag/v1.0.0-rc.0)
+  for further information about what modifications to the moonraker.conf file
+  exactly had to be done. In a nutshell, KIAUH will now always patch the
+  required entries to the moonraker.conf if not already there.

 ### 2020-10-30:

 * The user can now choose to install Klipper as a systemd service.

-* The Shell Command extension and `shell_command.py` got renamed to G-Code Shell Command extension and `gcode_shell_command.py`. In case the [pending PR](https://github.com/KevinOConnor/klipper/pull/2173) will be merged in the future, this was an early attempt to dodge possible incompatibilities. The [G-Code Shell Command docs](gcode_shell_command.md) has been updated accordingly.
+* The Shell Command extension and `shell_command.py` got renamed to G-Code Shell
+  Command extension and `gcode_shell_command.py`. In case
+  the [pending PR](https://github.com/KevinOConnor/klipper/pull/2173) will be
+  merged in the future, this was an early attempt to dodge possible
+  incompatibilities. The [G-Code Shell Command docs](gcode_shell_command.md) has
+  been updated accordingly.

-* The way how KIAUH interacts and writes to the users printer.cfg got changed. Usually KIAUH wrote everything directly into the printer.cfg. The way it will work from now on is, that a new file called `kiauh.cfg` will be created if there is something that needs to be written to the printer.cfg and everything gets written to `kiauh.cfg` instead. The only thing which then gets written to the users printer.cfg is `[include kiauh.cfg]`. This line will be located at the very top of the existing printer.cfg with a little comment as a note. The user can then decide to either keep the `kiauh.cfg` or take its content, places it into the printer.cfg directly and remove the `[include kiauh.cfg]`.
+* The way how KIAUH interacts and writes to the users printer.cfg got changed.
+  Usually KIAUH wrote everything directly into the printer.cfg. The way it will
+  work from now on is, that a new file called `kiauh.cfg` will be created if
+  there is something that needs to be written to the printer.cfg and everything
+  gets written to `kiauh.cfg` instead. The only thing which then gets written to
+  the users printer.cfg is `[include kiauh.cfg]`. This line will be located at
+  the very top of the existing printer.cfg with a little comment as a note. The
+  user can then decide to either keep the `kiauh.cfg` or take its content,
+  places it into the printer.cfg directly and remove the `[include kiauh.cfg]`.

-* The `mainsail_macros.cfg` got renamed to `webui_macros.cfg`. Since Mainsail and Fluidd both use the same kind of pause, cancel and resume macros, a more generic name was chosen for the file containing the example macros one can choose to install when installing those webinterfaces.
+* The `mainsail_macros.cfg` got renamed to `webui_macros.cfg`. Since Mainsail
+  and Fluidd both use the same kind of pause, cancel and resume macros, a more
+  generic name was chosen for the file containing the example macros one can
+  choose to install when installing those webinterfaces.

 ### 2020-10-10:

-* Support for changing the Klipper branch to the moonraker-dev branch from @Arksine has been dropped. Support for Moonraker has been merged into Klipper mainline a long time ago.
+* Support for changing the Klipper branch to the moonraker-dev branch from
+  @Arksine has been dropped. Support for Moonraker has been merged into Klipper
+  mainline a long time ago.

-* A new function is available from the main menu. You can now upload your log files to http://paste.c-net.org/ to share them for debugging purposes.
+* A new function is available from the main menu. You can now upload your log
+  files to http://paste.c-net.org/ to share them for debugging purposes.

 ### 2020-10-06:

-* Fluidd, a new Klipper interface got added to the list of available installers. At the same time some installation routines have changed or have seen some rework. Changes were made to the installation of NGINX configurations. A method was introduced to change the listen port of a webinterface configuration if there is already another webinterface listening on the default port (80).
+* Fluidd, a new Klipper interface got added to the list of available installers.
+  At the same time some installation routines have changed or have seen some
+  rework. Changes were made to the installation of NGINX configurations. A
+  method was introduced to change the listen port of a webinterface
+  configuration if there is already another webinterface listening on the
+  default port (80).

-* At the moment, the Moonraker installer no longer asks you whether you want to install a web interface too. For now you therefore have to install them with their respective installers. Please report any bugs or issues you encounter.
+* At the moment, the Moonraker installer no longer asks you whether you want to
+  install a web interface too. For now you therefore have to install them with
+  their respective installers. Please report any bugs or issues you encounter.

 ### 2020-09-17:

-* The dev-2.0 branch will be abandoned as of today. If you did a checkout to that branch in the past, you have to checkout back to master to receive updates.
+* The dev-2.0 branch will be abandoned as of today. If you did a checkout to
+  that branch in the past, you have to checkout back to master to receive
+  updates.

 ### 2020-09-12:

-* The old [dwc2-for-klipper](https://github.com/Stephan3/dwc2-for-klipper) won't be supported anymore!\
-The is a new, fully rewritten project available: [dwc2-for-klipper-socket](https://github.com/Stephan3/dwc2-for-klipper-socket).\
-The installer of this script also got rewritten to make use of that new project. You will not be able to install or remove the old [dwc2-for-klipper](https://github.com/Stephan3/dwc2-for-klipper) with KIAUH anymore if you updated KIAUH to the newest version.
+* The old [dwc2-for-klipper](https://github.com/Stephan3/dwc2-for-klipper) won't
+  be supported anymore!\
+  The is a new, fully rewritten project
+  available: [dwc2-for-klipper-socket](https://github.com/Stephan3/dwc2-for-klipper-socket).\
+  The installer of this script also got rewritten to make use of that new
+  project. You will not be able to install or remove the
+  old [dwc2-for-klipper](https://github.com/Stephan3/dwc2-for-klipper) with
+  KIAUH anymore if you updated KIAUH to the newest version.
--- a/kiauh.py
+++ b/kiauh.py
@@ -1,15 +0,0 @@
-#!/usr/bin/env python3
-
-# ======================================================================= #
-#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-from kiauh.main import main
-
-if __name__ == "__main__":
-    main()
--- a/kiauh.sh
+++ b/kiauh.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -15,11 +15,6 @@ clear -x
 # make sure we have the correct permissions while running the script
 umask 022

-### sourcing all additional scripts
-KIAUH_SRCDIR="$(dirname -- "$(readlink -f "${BASH_SOURCE[0]}")")"
-for script in "${KIAUH_SRCDIR}/scripts/"*.sh; do . "${script}"; done
-for script in "${KIAUH_SRCDIR}/scripts/ui/"*.sh; do . "${script}"; done
-
 #===================================================#
 #=================== UPDATE KIAUH ==================#
 #===================================================#
@@ -57,26 +52,17 @@ function kiauh_update_avail() {
  fi
 }

-function save_startup_version() {
-  local launch_version
-
-  echo "${1}"
-
-  sed -i "/^version_to_launch=/d" "${INI_FILE}"
-  sed -i '$a'"version_to_launch=${1}" "${INI_FILE}"
-}
-
 function kiauh_update_dialog() {
  [[ ! $(kiauh_update_avail) == "true" ]] && return
-  top_border
+  echo -e "/-------------------------------------------------------\\"
  echo -e "|${green}              New KIAUH update available!              ${white}|"
-  hr
+  echo -e "|-------------------------------------------------------|"
  echo -e "|${green}  View Changelog: https://git.io/JnmlX                 ${white}|"
-  blank_line
+  echo -e "|                                                       |"
  echo -e "|${yellow}  It is recommended to keep KIAUH up to date. Updates  ${white}|"
  echo -e "|${yellow}  usually contain bugfixes, important changes or new   ${white}|"
  echo -e "|${yellow}  features. Please consider updating!                  ${white}|"
-  bottom_border
+  echo -e "\-------------------------------------------------------/"

  local yn
  read -p "${cyan}###### Do you want to update now? (Y/n):${white} " yn
@@ -93,85 +79,52 @@ function kiauh_update_dialog() {
  done
 }

-function launch_kiauh_v5() {
-    main_menu
-}
-
-function launch_kiauh_v6() {
-  local entrypoint
-
-  if ! command -v python3 &>/dev/null || [[ $(python3 -V | cut -d " " -f2 | cut -d "." -f2) -lt 8 ]]; then
-    echo "Python 3.8 or higher is not installed!"
-    echo "Please install Python 3.8 or higher and try again."
+function check_euid() {
+  if [[ ${EUID} -eq 0 ]]; then
+    echo -e "${red}"
+    echo -e "/-------------------------------------------------------\\"
+    echo -e "|       !!! THIS SCRIPT MUST NOT RUN AS ROOT !!!        |"
+    echo -e "|                                                       |"
+    echo -e "|        It will ask for credentials as needed.         |"
+    echo -e "\-------------------------------------------------------/"
+    echo -e "${white}"
    exit 1
  fi
+}

-  entrypoint=$(dirname "$(readlink -f "${BASH_SOURCE[0]}")")
-
-  export PYTHONPATH="${entrypoint}"
-
-  clear -x
-  python3 "${entrypoint}/kiauh.py"
+function check_if_ratos() {
+  if [[ -n $(which ratos) ]]; then
+    echo -e "${red}"
+    echo -e "/-------------------------------------------------------\\"
+    echo -e "|        !!! RatOS 2.1 or greater detected !!!          |"
+    echo -e "|                                                       |"
+    echo -e "|        KIAUH does currently not support RatOS.        |"
+    echo -e "| If you have any questions, please ask for help on the |"
+    echo -e "| RatRig Community Discord: https://discord.gg/ratrig   |"
+    echo -e "\-------------------------------------------------------/"
+    echo -e "${white}"
+    exit 1
+  fi
 }

 function main() {
-  read_kiauh_ini "${FUNCNAME[0]}"
+   local entrypoint

-  if [[ ${version_to_launch} -eq 5 ]]; then
-    launch_kiauh_v5
-  elif [[ ${version_to_launch} -eq 6 ]]; then
-    launch_kiauh_v6
-  else
-    top_border
-    echo -e "|         ${green}KIAUH v6.0.0-alpha1 is available now!${white}         |"
-    hr
-    echo -e "|         View Changelog: ${magenta}https://git.io/JnmlX${white}          |"
-    blank_line
-    echo -e "| KIAUH v6 was completely rewritten from the ground up. |"
-    echo -e "| It's based on Python 3.8 and has many improvements.   |"
-    blank_line
-    echo -e "| ${yellow}NOTE: Version 6 is still in alpha, so bugs may occur!${white} |"
-    echo -e "| ${yellow}Yet, your feedback and bug reports are very much${white}      |"
-    echo -e "| ${yellow}appreciated and will help finalize the release.${white}       |"
-    hr
-    echo -e "| Would you like to try out KIAUH v6?                   |"
-    echo -e "| 1) Yes                                                |"
-    echo -e "| 2) No                                                 |"
-    echo -e "| 3) Yes, remember my choice for next time              |"
-    echo -e "| 4) No, remember my choice for next time               |"
-    quit_footer
-    while true; do
-      read -p "${cyan}###### Select action:${white} " -e input
-      case "${input}" in
-        1)
-          launch_kiauh_v6
-          break;;
-        2)
-          launch_kiauh_v5
-          break;;
-        3)
-          save_startup_version 6
-          launch_kiauh_v6
-          break;;
-        4)
-          save_startup_version 5
-          launch_kiauh_v5
-          break;;
-        Q|q)
-          echo -e "${green}###### Happy printing! ######${white}"; echo
-          exit 0;;
-        *)
-          error_msg "Invalid Input!\n";;
-      esac
-    done && input=""
-  fi
+   if ! command -v python3 &>/dev/null || [[ $(python3 -V | cut -d " " -f2 | cut -d "." -f2) -lt 8 ]]; then
+     echo "Python 3.8 or higher is not installed!"
+     echo "Please install Python 3.8 or higher and try again."
+     exit 1
+   fi
+
+   entrypoint=$(dirname "$(readlink -f "${BASH_SOURCE[0]}")")
+
+   export PYTHONPATH="${entrypoint}"
+
+   clear -x
+   python3 "${entrypoint}/kiauh/main.py"
 }

 check_if_ratos
 check_euid
-init_logfile
-set_globals
 kiauh_update_dialog
-read_kiauh_ini
-init_ini
 main
--- a/kiauh/components/crowsnest/init.py
+++ b/kiauh/components/crowsnest/init.py
@@ -9,7 +9,6 @@

 from pathlib import Path

-from core.backup_manager import BACKUP_ROOT_DIR
 from core.constants import SYSTEMD

 # repo
@@ -20,7 +19,6 @@ CROWSNEST_SERVICE_NAME = "crowsnest.service"

 # directories
 CROWSNEST_DIR = Path.home().joinpath("crowsnest")
-CROWSNEST_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("crowsnest-backups")

 # files
 CROWSNEST_MULTI_CONFIG = CROWSNEST_DIR.joinpath("tools/.config")
--- a/kiauh/components/crowsnest/crowsnest.py
+++ b/kiauh/components/crowsnest/crowsnest.py
@@ -15,7 +15,6 @@ from subprocess import CalledProcessError, run
 from typing import List

 from components.crowsnest import (
-    CROWSNEST_BACKUP_DIR,
    CROWSNEST_BIN_FILE,
    CROWSNEST_DIR,
    CROWSNEST_INSTALL_SCRIPT,
@@ -26,8 +25,8 @@ from components.crowsnest import (
    CROWSNEST_SERVICE_NAME,
 )
 from components.klipper.klipper import Klipper
-from core.backup_manager.backup_manager import BackupManager
 from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
 from core.settings.kiauh_settings import KiauhSettings
 from core.types.component_status import ComponentStatus
 from utils.common import (
@@ -127,11 +126,11 @@ def update_crowsnest() -> None:

            settings = KiauhSettings()
            if settings.kiauh.backup_before_update:
-                bm = BackupManager()
-                bm.backup_directory(
-                    CROWSNEST_DIR.name,
-                    source=CROWSNEST_DIR,
-                    target=CROWSNEST_BACKUP_DIR,
+                svc = BackupService()
+                svc.backup_directory(
+                    source_path=CROWSNEST_DIR,
+                    target_path="crowsnest",
+                    backup_name="crowsnest",
                )

            git_pull_wrapper(CROWSNEST_DIR)
--- a/kiauh/components/klipper/init.py
+++ b/kiauh/components/klipper/init.py
@@ -9,8 +9,6 @@

 from pathlib import Path

-from core.backup_manager import BACKUP_ROOT_DIR
-
 MODULE_PATH = Path(__file__).resolve().parent

 KLIPPER_REPO_URL = "https://github.com/Klipper3d/klipper.git"
@@ -27,7 +25,6 @@ KLIPPER_SERVICE_NAME = "klipper.service"
 KLIPPER_DIR = Path.home().joinpath("klipper")
 KLIPPER_KCONFIGS_DIR = Path.home().joinpath("klipper-kconfigs")
 KLIPPER_ENV_DIR = Path.home().joinpath("klippy-env")
-KLIPPER_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("klipper-backups")

 # files
 KLIPPER_REQ_FILE = KLIPPER_DIR.joinpath("scripts/klippy-requirements.txt")
--- a/kiauh/components/klipper/klipper_utils.py
+++ b/kiauh/components/klipper/klipper_utils.py
@@ -16,7 +16,6 @@ from subprocess import CalledProcessError, run
 from typing import Dict, List

 from components.klipper import (
-    KLIPPER_BACKUP_DIR,
    KLIPPER_DIR,
    KLIPPER_ENV_DIR,
    KLIPPER_INSTALL_SCRIPT,
@@ -31,10 +30,10 @@ from components.webui_client.base_data import BaseWebClient
 from components.webui_client.client_config.client_config_setup import (
    create_client_config_symlink,
 )
-from core.backup_manager.backup_manager import BackupManager
 from core.constants import CURRENT_USER
 from core.instance_manager.base_instance import SUFFIX_BLACKLIST
 from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
 from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
@@ -198,9 +197,17 @@ def create_example_printer_cfg(


 def backup_klipper_dir() -> None:
-    bm = BackupManager()
-    bm.backup_directory("klipper", source=KLIPPER_DIR, target=KLIPPER_BACKUP_DIR)
-    bm.backup_directory("klippy-env", source=KLIPPER_ENV_DIR, target=KLIPPER_BACKUP_DIR)
+    svc = BackupService()
+    svc.backup_directory(
+        source_path=KLIPPER_DIR,
+        backup_name="klipper",
+        target_path="klipper",
+    )
+    svc.backup_directory(
+        source_path=KLIPPER_ENV_DIR,
+        backup_name="klippy-env",
+        target_path="klipper",
+    )


 def install_klipper_packages() -> None:
@@ -230,7 +237,6 @@ def install_input_shaper_deps() -> None:
            "If you agree, the following additional system packages will be installed:",
            "● python3-numpy",
            "● python3-matplotlib",
-            "● libatlas-base-dev",
            "● libopenblas-dev",
            "\n\n",
            "Also, the following Python package will be installed:",
@@ -246,7 +252,6 @@ def install_input_shaper_deps() -> None:
    apt_deps = (
        "python3-numpy",
        "python3-matplotlib",
-        "libatlas-base-dev",
        "libopenblas-dev",
    )
    check_install_dependencies({*apt_deps})
--- a/kiauh/components/klipperscreen/init.py
+++ b/kiauh/components/klipperscreen/init.py
@@ -8,7 +8,6 @@
 # ======================================================================= #
 from pathlib import Path

-from core.backup_manager import BACKUP_ROOT_DIR
 from core.constants import SYSTEMD

 # repo
@@ -22,7 +21,6 @@ KLIPPERSCREEN_LOG_NAME = "KlipperScreen.log"
 # directories
 KLIPPERSCREEN_DIR = Path.home().joinpath("KlipperScreen")
 KLIPPERSCREEN_ENV_DIR = Path.home().joinpath(".KlipperScreen-env")
-KLIPPERSCREEN_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("klipperscreen-backups")

 # files
 KLIPPERSCREEN_REQ_FILE = KLIPPERSCREEN_DIR.joinpath(
--- a/kiauh/components/klipperscreen/klipperscreen.py
+++ b/kiauh/components/klipperscreen/klipperscreen.py
@@ -13,7 +13,6 @@ from typing import List

 from components.klipper.klipper import Klipper
 from components.klipperscreen import (
-    KLIPPERSCREEN_BACKUP_DIR,
    KLIPPERSCREEN_DIR,
    KLIPPERSCREEN_ENV_DIR,
    KLIPPERSCREEN_INSTALL_SCRIPT,
@@ -25,10 +24,10 @@ from components.klipperscreen import (
    KLIPPERSCREEN_UPDATER_SECTION_NAME,
 )
 from components.moonraker.moonraker import Moonraker
-from core.backup_manager.backup_manager import BackupManager
 from core.constants import SYSTEMD
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
 from core.settings.kiauh_settings import KiauhSettings
 from core.types.component_status import ComponentStatus
 from utils.common import (
@@ -97,6 +96,7 @@ def install_klipperscreen() -> None:


 def patch_klipperscreen_update_manager(instances: List[Moonraker]) -> None:
+    BackupService().backup_moonraker_conf()
    add_config_section(
        section=KLIPPERSCREEN_UPDATER_SECTION_NAME,
        instances=instances,
@@ -183,6 +183,7 @@ def remove_klipperscreen() -> None:
        mr_instances: List[Moonraker] = get_instances(Moonraker)
        if mr_instances:
            Logger.print_status("Removing KlipperScreen from update manager ...")
+            BackupService().backup_moonraker_conf()
            remove_config_section("update_manager KlipperScreen", mr_instances)
            Logger.print_ok("KlipperScreen successfully removed from update manager!")

@@ -193,14 +194,14 @@ def remove_klipperscreen() -> None:


 def backup_klipperscreen_dir() -> None:
-    bm = BackupManager()
-    bm.backup_directory(
-        KLIPPERSCREEN_DIR.name,
-        source=KLIPPERSCREEN_DIR,
-        target=KLIPPERSCREEN_BACKUP_DIR,
+    svc = BackupService()
+    svc.backup_directory(
+        source_path=KLIPPERSCREEN_DIR,
+        backup_name="KlipperScreen",
+        target_path="KlipperScreen",
    )
-    bm.backup_directory(
-        KLIPPERSCREEN_ENV_DIR.name,
-        source=KLIPPERSCREEN_ENV_DIR,
-        target=KLIPPERSCREEN_BACKUP_DIR,
+    svc.backup_directory(
+        source_path=KLIPPERSCREEN_ENV_DIR,
+        backup_name="KlipperScreen-env",
+        target_path="KlipperScreen",
    )
--- a/kiauh/components/moonraker/init.py
+++ b/kiauh/components/moonraker/init.py
@@ -9,8 +9,6 @@

 from pathlib import Path

-from core.backup_manager import BACKUP_ROOT_DIR
-
 MODULE_PATH = Path(__file__).resolve().parent

 MOONRAKER_REPO_URL = "https://github.com/Arksine/moonraker.git"
@@ -25,8 +23,6 @@ MOONRAKER_ENV_FILE_NAME = "moonraker.env"
 # directories
 MOONRAKER_DIR = Path.home().joinpath("moonraker")
 MOONRAKER_ENV_DIR = Path.home().joinpath("moonraker-env")
-MOONRAKER_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("moonraker-backups")
-MOONRAKER_DB_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("moonraker-db-backups")

 # files
 MOONRAKER_INSTALL_SCRIPT = MOONRAKER_DIR.joinpath("scripts/install-moonraker.sh")
--- a/kiauh/components/moonraker/utils/sysdeps_parser.py
+++ b/kiauh/components/moonraker/utils/sysdeps_parser.py
@@ -61,6 +61,9 @@ class SysDepsParser:
        version = distro_info.get("distro_version")
        if version:
            self.distro_version = _convert_version(version)
+        self.vendor: str = ""
+        if pathlib.Path("/etc/rpi-issue").is_file():
+            self.vendor = "raspberry-pi"

    def _parse_spec(self, full_spec: str) -> str | None:
        parts = full_spec.split(";", maxsplit=1)
@@ -109,6 +112,9 @@ class SysDepsParser:
            elif req_var == "distro_id":
                left_op: str | Tuple[int | str, ...] = self.distro_id
                right_op = dep_parts[2].strip().strip("\"'")
+            elif req_var == "vendor":
+                left_op = self.vendor
+                right_op = dep_parts[2].strip().strip("\"'")
            elif req_var == "distro_version":
                if not self.distro_version:
                    logging.info(
--- a/kiauh/components/moonraker/utils/utils.py
+++ b/kiauh/components/moonraker/utils/utils.py
@@ -14,8 +14,6 @@ from typing import Dict, List, Optional

 from components.moonraker import (
    MODULE_PATH,
-    MOONRAKER_BACKUP_DIR,
-    MOONRAKER_DB_BACKUP_DIR,
    MOONRAKER_DEFAULT_PORT,
    MOONRAKER_DEPS_JSON_FILE,
    MOONRAKER_DIR,
@@ -25,8 +23,8 @@ from components.moonraker import (
 from components.moonraker.moonraker import Moonraker
 from components.moonraker.utils.sysdeps_parser import SysDepsParser
 from components.webui_client.base_data import BaseWebClient
-from core.backup_manager.backup_manager import BackupManager
 from core.logger import Logger
+from core.services.backup_service import BackupService
 from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
@@ -125,7 +123,7 @@ def create_example_moonraker_conf(
    scp = SimpleConfigParser()
    scp.read_file(target)
    trusted_clients: List[str] = [
-        f"    {'.'.join(ip)}\n",
+        f"{'.'.join(ip)}",
        *scp.getvals("authorization", "trusted_clients"),
    ]

@@ -168,21 +166,55 @@ def create_example_moonraker_conf(


 def backup_moonraker_dir() -> None:
-    bm = BackupManager()
-    bm.backup_directory("moonraker", source=MOONRAKER_DIR, target=MOONRAKER_BACKUP_DIR)
-    bm.backup_directory(
-        "moonraker-env", source=MOONRAKER_ENV_DIR, target=MOONRAKER_BACKUP_DIR
+    svc = BackupService()
+    svc.backup_directory(
+        source_path=MOONRAKER_DIR, backup_name="moonraker", target_path="moonraker"
+    )
+    svc.backup_directory(
+        source_path=MOONRAKER_ENV_DIR,
+        backup_name="moonraker-env",
+        target_path="moonraker",
    )


 def backup_moonraker_db_dir() -> None:
    instances: List[Moonraker] = get_instances(Moonraker)
-    bm = BackupManager()
+    svc = BackupService()
+
+    if not instances:
+        # fallback: search for printer data directories in the user's home directory
+        Logger.print_info("No Moonraker instances found via systemd services.")
+        Logger.print_info(
+            "Attempting to find printer data directories in home directory..."
+        )
+
+        home_dir = Path.home()
+        printer_data_dirs = []
+
+        for pattern in ["printer_data", "printer_*_data"]:
+            for data_dir in home_dir.glob(pattern):
+                if data_dir.is_dir():
+                    printer_data_dirs.append(data_dir)
+
+        if not printer_data_dirs:
+            Logger.print_info("Unable to find directory to backup!")
+            Logger.print_info("No printer data directories found in home directory.")
+            return
+
+        for data_dir in printer_data_dirs:
+            svc.backup_directory(
+                source_path=data_dir.joinpath("database"),
+                target_path=data_dir.name,
+                backup_name="database",
+            )
+
+        return

    for instance in instances:
-        name = f"database-{instance.data_dir.name}"
-        bm.backup_directory(
-            name, source=instance.db_dir, target=MOONRAKER_DB_BACKUP_DIR
+        svc.backup_directory(
+            source_path=instance.db_dir,
+            target_path=f"{instance.data_dir.name}",
+            backup_name="database",
        )


--- a/kiauh/components/webui_client/base_data.py
+++ b/kiauh/components/webui_client/base_data.py
@@ -34,7 +34,6 @@ class BaseWebClient(ABC):
    display_name: str
    client_dir: Path
    config_file: Path
-    backup_dir: Path
    repo_path: str
    download_url: str
    nginx_config: Path
@@ -52,6 +51,5 @@ class BaseWebClientConfig(ABC):
    display_name: str
    config_filename: str
    config_dir: Path
-    backup_dir: Path
    repo_url: str
    config_section: str
--- a/kiauh/components/webui_client/client_config/client_config_remove.py
+++ b/kiauh/components/webui_client/client_config/client_config_remove.py
@@ -14,6 +14,7 @@ from components.klipper.klipper import Klipper
 from components.moonraker.moonraker import Moonraker
 from components.webui_client.base_data import BaseWebClientConfig
 from core.logger import Logger
+from core.services.backup_service import BackupService
 from core.services.message_service import Message
 from core.types.color import Color
 from utils.config_utils import remove_config_section
@@ -35,6 +36,8 @@ def run_client_config_removal(
    if run_remove_routines(client_config.config_dir):
        completion_msg.text.append(f"● {client_config.display_name} removed")

+    BackupService().backup_printer_config_dir()
+
    completion_msg = remove_moonraker_config_section(
        completion_msg, client_config, mr_instances
    )
--- a/kiauh/components/webui_client/client_config/client_config_setup.py
+++ b/kiauh/components/webui_client/client_config/client_config_setup.py
@@ -25,8 +25,8 @@ from components.webui_client.client_utils import (
 )
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import Logger
+from core.services.backup_service import BackupService
 from core.settings.kiauh_settings import KiauhSettings
-from utils.common import backup_printer_config_dir
 from utils.config_utils import add_config_section, add_config_section_at_top
 from utils.fs_utils import create_symlink
 from utils.git_utils import git_clone_wrapper, git_pull_wrapper
@@ -57,7 +57,7 @@ def install_client_config(client_data: BaseWebClient, cfg_backup=True) -> None:
        create_client_config_symlink(client_config, kl_instances)

        if cfg_backup:
-            backup_printer_config_dir()
+            BackupService().backup_printer_config_dir()

        add_config_section(
            section=f"update_manager {client_config.name}",
--- a/kiauh/components/webui_client/client_remove.py
+++ b/kiauh/components/webui_client/client_remove.py
@@ -16,9 +16,9 @@ from components.webui_client.base_data import (
 from components.webui_client.client_config.client_config_remove import (
    run_client_config_removal,
 )
-from core.backup_manager.backup_manager import BackupManager
 from core.constants import NGINX_SITES_AVAILABLE, NGINX_SITES_ENABLED
 from core.logger import Logger
+from core.services.backup_service import BackupService
 from core.services.message_service import Message
 from core.types.color import Color
 from utils.config_utils import remove_config_section
@@ -43,8 +43,19 @@ def run_client_removal(
    kl_instances: List[Klipper] = get_instances(Klipper)

    if backup_config:
-        bm = BackupManager()
-        if bm.backup_file(client.config_file):
+        version = ""
+        src = client.client_dir
+        if src.joinpath(".version").exists():
+            with open(src.joinpath(".version"), "r") as v:
+                version = v.readlines()[0]
+
+        svc = BackupService()
+        target_path = svc.backup_root.joinpath(f"{client.client_dir.name}_{version}")
+        success = svc.backup_file(
+            source_path=client.config_file,
+            target_path=target_path,
+        )
+        if success:
            completion_msg.text.append(f"● {client.config_file.name} backup created")

    if remove_client:
@@ -56,6 +67,7 @@ def run_client_removal(
        if remove_client_nginx_logs(client, kl_instances):
            completion_msg.text.append("● NGINX logs removed")

+        BackupService().backup_moonraker_conf()
        section = f"update_manager {client_name}"
        handled_instances: List[Moonraker] = remove_config_section(
            section, mr_instances
--- a/kiauh/components/webui_client/client_setup.py
+++ b/kiauh/components/webui_client/client_setup.py
@@ -37,9 +37,10 @@ from components.webui_client.client_utils import (
 )
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
 from core.settings.kiauh_settings import KiauhSettings
 from core.types.color import Color
-from utils.common import backup_printer_config_dir, check_install_dependencies
+from utils.common import check_install_dependencies
 from utils.config_utils import add_config_section
 from utils.fs_utils import unzip
 from utils.input_utils import get_confirm
@@ -97,7 +98,7 @@ def install_client(
        if enable_remotemode and client.client == WebClientType.MAINSAIL:
            enable_mainsail_remotemode()

-        backup_printer_config_dir()
+        BackupService().backup_printer_config_dir()
        add_config_section(
            section=f"update_manager {client.name}",
            instances=mr_instances,
--- a/kiauh/components/webui_client/client_utils.py
+++ b/kiauh/components/webui_client/client_utils.py
@@ -11,6 +11,7 @@ from __future__ import annotations
 import json
 import re
 import shutil
+from json import JSONDecodeError
 from pathlib import Path
 from subprocess import PIPE, CalledProcessError, run
 from typing import List, get_args
@@ -24,13 +25,13 @@ from components.webui_client.base_data import (
 from components.webui_client.client_dialogs import print_client_port_select_dialog
 from components.webui_client.fluidd_data import FluiddData
 from components.webui_client.mainsail_data import MainsailData
-from core.backup_manager.backup_manager import BackupManager
 from core.constants import (
    NGINX_CONFD,
    NGINX_SITES_AVAILABLE,
    NGINX_SITES_ENABLED,
 )
 from core.logger import Logger
+from core.services.backup_service import BackupService
 from core.settings.kiauh_settings import KiauhSettings, WebUiSettings
 from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
@@ -118,7 +119,7 @@ def enable_mainsail_remotemode() -> None:
    c_json = MainsailData().client_dir.joinpath("config.json")
    with open(c_json, "r") as f:
        config_data = json.load(f)
-    
+
    if config_data["instancesDB"] == "browser" or config_data["instancesDB"] == "json":
        Logger.print_info("Remote mode already configured. Skipped ...")
        return
@@ -151,18 +152,36 @@ def symlink_webui_nginx_log(
 def get_local_client_version(client: BaseWebClient) -> str | None:
    relinfo_file = client.client_dir.joinpath("release_info.json")
    version_file = client.client_dir.joinpath(".version")
+    default = "n/a"

    if not client.client_dir.exists():
-        return None
-    if not relinfo_file.is_file() and not version_file.is_file():
-        return "n/a"
+        return default

+    # try to get version from release_info.json first
    if relinfo_file.is_file():
-        with open(relinfo_file, "r") as f:
-            return str(json.load(f)["version"])
-    else:
-        with open(version_file, "r") as f:
-            return f.readlines()[0]
+        try:
+            if relinfo_file.stat().st_size == 0:
+                raise JSONDecodeError("Empty file", "", 0)
+            with open(relinfo_file, "r", encoding="utf-8") as f:
+                data = json.load(f)
+            raw_version = data.get("version")
+            if raw_version is not None:
+                parsed = str(raw_version).strip()
+                if parsed:
+                    return parsed
+        except (JSONDecodeError, OSError):
+            Logger.print_error("Invalid 'release_info.json'")
+
+    # fallback to .version file
+    if version_file.is_file():
+        try:
+            with open(version_file, "r") as f:
+                line = f.readline().strip()
+            return line or default
+        except OSError:
+            Logger.print_error("Unable to read '.version'")
+
+    return default


 def get_remote_client_version(client: BaseWebClient) -> str | None:
@@ -175,26 +194,39 @@ def get_remote_client_version(client: BaseWebClient) -> str | None:


 def backup_client_data(client: BaseWebClient) -> None:
-    name = client.name
+    version = ""
    src = client.client_dir
-    dest = client.backup_dir
+    if src.joinpath(".version").exists():
+        with open(src.joinpath(".version"), "r") as v:
+            version = v.readlines()[0]

-    with open(src.joinpath(".version"), "r") as v:
-        version = v.readlines()[0]
-
-    bm = BackupManager()
-    bm.backup_directory(f"{name}-{version}", src, dest)
-    bm.backup_file(client.config_file, dest)
-    bm.backup_file(NGINX_SITES_AVAILABLE.joinpath(name), dest)
+    svc = BackupService()
+    target_path = svc.backup_root.joinpath(f"{client.client_dir.name}_{version}")
+    svc.backup_directory(
+        source_path=client.client_dir,
+        target_path=target_path,
+        backup_name=client.name,
+    )
+    svc.backup_file(
+        source_path=client.config_file,
+        target_path=target_path,
+    )


 def backup_client_config_data(client: BaseWebClient) -> None:
-    client_config = client.client_config
-    name = client_config.name
-    source = client_config.config_dir
-    target = client_config.backup_dir
-    bm = BackupManager()
-    bm.backup_directory(name, source, target)
+    version = ""
+    src = client.client_dir
+    if src.joinpath(".version").exists():
+        with open(src.joinpath(".version"), "r") as v:
+            version = v.readlines()[0]
+
+    svc = BackupService()
+    target_path = svc.backup_root.joinpath(f"{client.client_dir.name}_{version}")
+    svc.backup_directory(
+        source_path=client.client_config.config_dir,
+        target_path=target_path,
+        backup_name=client.client_config.name,
+    )


 def get_existing_clients() -> List[BaseWebClient]:
--- a/kiauh/components/webui_client/fluidd_data.py
+++ b/kiauh/components/webui_client/fluidd_data.py
@@ -18,7 +18,6 @@ from components.webui_client.base_data import (
    WebClientConfigType,
    WebClientType,
 )
-from core.backup_manager import BACKUP_ROOT_DIR
 from core.constants import NGINX_SITES_AVAILABLE


@@ -30,7 +29,6 @@ class FluiddConfigWeb(BaseWebClientConfig):
    config_dir: Path = Path.home().joinpath("fluidd-config")
    config_filename: str = "fluidd.cfg"
    config_section: str = f"include {config_filename}"
-    backup_dir: Path = BACKUP_ROOT_DIR.joinpath("fluidd-config-backups")
    repo_url: str = "https://github.com/fluidd-core/fluidd-config.git"


@@ -43,7 +41,6 @@ class FluiddData(BaseWebClient):
    display_name: str = name.capitalize()
    client_dir: Path = Path.home().joinpath("fluidd")
    config_file: Path = client_dir.joinpath("config.json")
-    backup_dir: Path = BACKUP_ROOT_DIR.joinpath("fluidd-backups")
    repo_path: str = "fluidd-core/fluidd"
    nginx_config: Path = NGINX_SITES_AVAILABLE.joinpath("fluidd")
    nginx_access_log: Path = Path("/var/log/nginx/fluidd-access.log")
--- a/kiauh/components/webui_client/mainsail_data.py
+++ b/kiauh/components/webui_client/mainsail_data.py
@@ -18,7 +18,6 @@ from components.webui_client.base_data import (
    WebClientConfigType,
    WebClientType,
 )
-from core.backup_manager import BACKUP_ROOT_DIR
 from core.constants import NGINX_SITES_AVAILABLE


@@ -30,7 +29,6 @@ class MainsailConfigWeb(BaseWebClientConfig):
    config_dir: Path = Path.home().joinpath("mainsail-config")
    config_filename: str = "mainsail.cfg"
    config_section: str = f"include {config_filename}"
-    backup_dir: Path = BACKUP_ROOT_DIR.joinpath("mainsail-config-backups")
    repo_url: str = "https://github.com/mainsail-crew/mainsail-config.git"


@@ -43,7 +41,6 @@ class MainsailData(BaseWebClient):
    display_name: str = name.capitalize()
    client_dir: Path = Path.home().joinpath("mainsail")
    config_file: Path = client_dir.joinpath("config.json")
-    backup_dir: Path = BACKUP_ROOT_DIR.joinpath("mainsail-backups")
    repo_path: str = "mainsail-crew/mainsail"
    nginx_config: Path = NGINX_SITES_AVAILABLE.joinpath("mainsail")
    nginx_access_log: Path = Path("/var/log/nginx/mainsail-access.log")
--- a/kiauh/core/backup_manager/init.py
+++ b/kiauh/core/backup_manager/init.py
@@ -1,12 +0,0 @@
-# ======================================================================= #
-#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-from pathlib import Path
-
-BACKUP_ROOT_DIR = Path.home().joinpath("kiauh-backups")
--- a/kiauh/core/backup_manager/backup_manager.py
+++ b/kiauh/core/backup_manager/backup_manager.py
@@ -1,108 +0,0 @@
-# ======================================================================= #
-#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-from __future__ import annotations
-
-import shutil
-from pathlib import Path
-from typing import List
-
-from core.backup_manager import BACKUP_ROOT_DIR
-from core.logger import Logger
-from utils.common import get_current_date
-
-
-class BackupManagerException(Exception):
-    pass
-
-
-# noinspection PyUnusedLocal
-# noinspection PyMethodMayBeStatic
-class BackupManager:
-    def __init__(self, backup_root_dir: Path = BACKUP_ROOT_DIR):
-        self._backup_root_dir: Path = backup_root_dir
-        self._ignore_folders: List[str] = []
-
-    @property
-    def backup_root_dir(self) -> Path:
-        return self._backup_root_dir
-
-    @backup_root_dir.setter
-    def backup_root_dir(self, value: Path):
-        self._backup_root_dir = value
-
-    @property
-    def ignore_folders(self) -> List[str]:
-        return self._ignore_folders
-
-    @ignore_folders.setter
-    def ignore_folders(self, value: List[str]):
-        self._ignore_folders = value
-
-    def backup_file(
-        self, file: Path, target: Path | None = None, custom_filename=None
-    ) -> bool:
-        Logger.print_status(f"Creating backup of {file} ...")
-
-        if not file.exists():
-            Logger.print_info("File does not exist! Skipping ...")
-            return False
-
-        target = self.backup_root_dir if target is None else target
-
-        if Path(file).is_file():
-            date = get_current_date().get("date")
-            time = get_current_date().get("time")
-            filename = f"{file.stem}-{date}-{time}{file.suffix}"
-            filename = custom_filename if custom_filename is not None else filename
-            try:
-                Path(target).mkdir(exist_ok=True)
-                shutil.copyfile(file, target.joinpath(filename))
-                Logger.print_ok("Backup successful!")
-                return True
-            except OSError as e:
-                Logger.print_error(f"Unable to backup '{file}':\n{e}")
-                return False
-        else:
-            Logger.print_info(f"File '{file}' not found ...")
-            return False
-
-    def backup_directory(
-        self, name: str, source: Path, target: Path | None = None
-    ) -> Path | None:
-        Logger.print_status(f"Creating backup of {name} in {target} ...")
-
-        if source is None or not Path(source).exists():
-            Logger.print_info("Source directory does not exist! Skipping ...")
-            return None
-
-        target = self.backup_root_dir if target is None else target
-        try:
-            date = get_current_date().get("date")
-            time = get_current_date().get("time")
-            backup_target = target.joinpath(f"{name.lower()}-{date}-{time}")
-            shutil.copytree(
-                source,
-                backup_target,
-                ignore=self.ignore_folders_func,
-                ignore_dangling_symlinks=True,
-            )
-            Logger.print_ok("Backup successful!")
-
-            return backup_target
-
-        except OSError as e:
-            Logger.print_error(f"Unable to backup directory '{source}':\n{e}")
-            raise BackupManagerException(f"Unable to backup directory '{source}':\n{e}")
-
-    def ignore_folders_func(self, dirpath, filenames) -> List[str]:
-        return (
-            [f for f in filenames if f in self._ignore_folders]
-            if self._ignore_folders
-            else []
-        )
--- a/kiauh/core/constants.py
+++ b/kiauh/core/constants.py
@@ -11,8 +11,6 @@ import os
 import pwd
 from pathlib import Path

-from core.backup_manager import BACKUP_ROOT_DIR
-
 # global dependencies
 GLOBAL_DEPS = ["git", "wget", "curl", "unzip", "dfu-util", "python3-virtualenv"]

@@ -24,7 +22,6 @@ CURRENT_USER = pwd.getpwuid(os.getuid())[0]

 # dirs
 SYSTEMD = Path("/etc/systemd/system")
-PRINTER_DATA_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("printer-data-backups")
 NGINX_SITES_AVAILABLE = Path("/etc/nginx/sites-available")
 NGINX_SITES_ENABLED = Path("/etc/nginx/sites-enabled")
 NGINX_CONFD = Path("/etc/nginx/conf.d")
--- a/kiauh/core/menus/backup_menu.py
+++ b/kiauh/core/menus/backup_menu.py
@@ -25,8 +25,8 @@ from components.webui_client.fluidd_data import FluiddData
 from components.webui_client.mainsail_data import MainsailData
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
+from core.services.backup_service import BackupService
 from core.types.color import Color
-from utils.common import backup_printer_config_dir


 # noinspection PyUnusedLocal
@@ -58,7 +58,7 @@ class BackupMenu(BaseMenu):

    def print_menu(self) -> None:
        line1 = Color.apply(
-            "INFO: Backups are located in '~/kiauh-backups'", Color.YELLOW
+            "INFO: Backups are located in '~/kiauh_backups'", Color.YELLOW
        )
        menu = textwrap.dedent(
            f"""
@@ -86,7 +86,7 @@ class BackupMenu(BaseMenu):
        backup_moonraker_dir()

    def backup_printer_config(self, **kwargs) -> None:
-        backup_printer_config_dir()
+        BackupService().backup_printer_config_dir()

    def backup_moonraker_db(self, **kwargs) -> None:
        backup_moonraker_db_dir()
--- a/kiauh/core/services/backup_service.py
+++ b/kiauh/core/services/backup_service.py
@@ -0,0 +1,198 @@
+# ======================================================================= #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from __future__ import annotations
+
+import shutil
+from datetime import datetime
+from pathlib import Path
+from typing import List, Optional
+
+from components.klipper.klipper import Klipper
+from components.moonraker.moonraker import Moonraker
+from core.logger import Logger
+from utils.instance_utils import get_instances
+
+
+class BackupService:
+    def __init__(self):
+        self._backup_root = Path.home().joinpath("kiauh_backups")
+
+    @property
+    def backup_root(self) -> Path:
+        return self._backup_root
+
+    @property
+    def timestamp(self) -> str:
+        return datetime.now().strftime("%Y%m%d-%H%M%S")
+
+    ################################################
+    # GENERIC BACKUP METHODS
+    ################################################
+
+    def backup_file(
+        self,
+        source_path: Path,
+        target_path: Optional[Path | str] = None,
+        target_name: Optional[str] = None,
+    ) -> bool:
+        source_path = Path(source_path)
+
+        Logger.print_status(f"Creating backup of {source_path} ...")
+
+        if not source_path.exists():
+            Logger.print_info(
+                f"File '{source_path}' does not exist! Skipping backup..."
+            )
+            return False
+
+        if not source_path.is_file():
+            Logger.print_info(f"'{source_path}' is not a file! Skipping backup...")
+            return False
+
+        try:
+            self._backup_root.mkdir(parents=True, exist_ok=True)
+
+            filename = (
+                target_name
+                or f"{source_path.stem}_{self.timestamp}{source_path.suffix}"
+            )
+
+            backup_dir = self._backup_root
+            if target_path is not None:
+                backup_dir = self._backup_root.joinpath(target_path)
+
+            backup_dir.mkdir(parents=True, exist_ok=True)
+            shutil.copy2(source_path, backup_dir.joinpath(filename))
+
+            Logger.print_ok(
+                f"Successfully backed up '{source_path}' to '{backup_dir}'"
+            )
+            return True
+
+        except Exception as e:
+            Logger.print_error(f"Failed to backup '{source_path}': {e}")
+            return False
+
+    def backup_directory(
+        self,
+        source_path: Path,
+        backup_name: str,
+        target_path: Optional[Path | str] = None,
+    ) -> Optional[Path]:
+        source_path = Path(source_path)
+
+        Logger.print_status(f"Creating backup of {source_path} ...")
+
+        if not source_path.exists():
+            Logger.print_info(
+                f"Directory '{source_path}' does not exist! Skipping backup..."
+            )
+            return None
+
+        if not source_path.is_dir():
+            Logger.print_info(f"'{source_path}' is not a directory! Skipping backup...")
+            return None
+
+        try:
+            self._backup_root.mkdir(parents=True, exist_ok=True)
+
+            backup_dir_name = f"{backup_name}_{self.timestamp}"
+
+            if target_path is not None:
+                backup_path = self._backup_root.joinpath(target_path, backup_dir_name)
+            else:
+                backup_path = self._backup_root.joinpath(backup_dir_name)
+
+            if backup_path.exists():
+                Logger.print_info(f"Reusing existing backup directory '{backup_path}'")
+
+            shutil.copytree(
+                source_path,
+                backup_path,
+                dirs_exist_ok=True,
+                symlinks=True,
+                ignore_dangling_symlinks=True,
+            )
+
+            Logger.print_ok(
+                f"Successfully backed up '{source_path}' to '{backup_path}'"
+            )
+            return backup_path
+
+        except Exception as e:
+            Logger.print_error(f"Failed to backup directory '{source_path}': {e}")
+            return None
+
+    ################################################
+    # SPECIFIC BACKUP METHODS
+    ################################################
+
+    def backup_printer_cfg(self):
+        klipper_instances: List[Klipper] = get_instances(Klipper)
+        for instance in klipper_instances:
+            target_path: Path = self._backup_root.joinpath(
+                instance.data_dir.name, f"config_{self.timestamp}"
+            )
+            self.backup_file(
+                source_path=instance.cfg_file,
+                target_path=target_path,
+                target_name=instance.cfg_file.name,
+            )
+
+    def backup_moonraker_conf(self):
+        moonraker_instances: List[Moonraker] = get_instances(Moonraker)
+        for instance in moonraker_instances:
+            target_path: Path = self._backup_root.joinpath(
+                instance.data_dir.name, f"config_{self.timestamp}"
+            )
+            self.backup_file(
+                source_path=instance.cfg_file,
+                target_path=target_path,
+                target_name=instance.cfg_file.name,
+            )
+
+    def backup_printer_config_dir(self) -> None:
+        instances: List[Klipper] = get_instances(Klipper)
+        if not instances:
+            # fallback: search for printer data directories in the user's home directory
+            Logger.print_info("No Klipper instances found via systemd services.")
+            Logger.print_info(
+                "Attempting to find printer data directories in home directory..."
+            )
+
+            home_dir = Path.home()
+            printer_data_dirs = []
+
+            for pattern in ["printer_data", "printer_*_data"]:
+                for data_dir in home_dir.glob(pattern):
+                    if data_dir.is_dir():
+                        printer_data_dirs.append(data_dir)
+
+            if not printer_data_dirs:
+                Logger.print_info("Unable to find directory to backup!")
+                Logger.print_info(
+                    "No printer data directories found in home directory."
+                )
+                return
+
+            for data_dir in printer_data_dirs:
+                self.backup_directory(
+                    source_path=data_dir.joinpath("config"),
+                    target_path=data_dir.name,
+                    backup_name="config",
+                )
+
+            return
+
+        for instance in instances:
+            self.backup_directory(
+                source_path=instance.base.cfg_dir,
+                target_path=f"{instance.data_dir.name}",
+                backup_name="config",
+            )
--- a/kiauh/core/settings/kiauh_settings.py
+++ b/kiauh/core/settings/kiauh_settings.py
@@ -14,8 +14,8 @@ from typing import Any, Callable, List, TypeVar

 from components.klipper import KLIPPER_REPO_URL
 from components.moonraker import MOONRAKER_REPO_URL
-from core.backup_manager.backup_manager import BackupManager
 from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
 from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
@@ -254,32 +254,34 @@ class KiauhSettings:
        section: str,
        option: str,
        getter: Callable[[str, str, T | None], T],
-        fallback: T = None,
+        fallback: T | None = None,
        silent: bool = False,
-    ) -> T:
+    ) -> T | None:
        if not self.__check_option_exists(section, option, fallback, silent):
            return fallback
        return getter(section, option, fallback)

    def __set_repo_state(self, section: str, repos: List[str]) -> List[Repository]:
        _repos: List[Repository] = []
-        for repo in repos:
-            try:
-                if repo.strip().startswith("#") or repo.strip().startswith(";"):
-                    continue
-                if "," in repo:
-                    url, branch = repo.strip().split(",")
+        for raw in repos:
+            line = raw.strip()

-                    if not branch:
-                        branch = "master"
+            if not line or line.startswith("#") or line.startswith(";"):
+                continue
+
+            try:
+                if "," in line:
+                    url_part, branch_part = line.split(",")
+                    url = url_part.strip()
+                    branch = branch_part.strip() or "master"
                else:
-                    url = repo.strip()
+                    url = line
                    branch = "master"

                # url must not be empty otherwise it's considered
                # as an unrecoverable, invalid configuration
                if not url:
-                    raise InvalidValueError(section, "repositories", repo)
+                    raise InvalidValueError(section, "repositories", line)

                _repos.append(Repository(url.strip(), branch.strip()))

@@ -374,8 +376,8 @@ class KiauhSettings:
            kill()

    def _migrate_repo_config(self) -> None:
-        bm = BackupManager()
-        if not bm.backup_file(CUSTOM_CFG):
+        svc = BackupService()
+        if not svc.backup_file(CUSTOM_CFG):
            Logger.print_dialog(
                DialogType.ERROR,
                [
--- a/kiauh/core/submodules/simple_config_parser/README.md
+++ b/kiauh/core/submodules/simple_config_parser/README.md
@@ -10,42 +10,10 @@ Specialized for handling Klipper style config files.
 - Section: A section is defined by a line starting with a `[` and ending with a `]`
 - Option: A line starting with a word, followed by a `:` or `=` and a value
 - Option Block: A line starting with a word, followed by a `:` or `=` and a newline
+  - The word `gcode` is excluded from being treated as an option block
+- Gcode Block: A line starting with the word `gcode`, followed by a `:` or `=` and a newline
+  - All indented lines following the gcode line are considered part of the gcode block
 - Comment: A line starting with a `#` or `;`
 - Blank: A line containing only whitespace characters
- SaveConfig: Klippers auto-generated SAVE_CONFIG section that can be found at the very end of the config file
+- SaveConfig Block: Klippers auto-generated SAVE_CONFIG section that can be found at the very end of the config file

---
-
-### Internally, the config is stored as a dictionary of sections, each containing a header and a list of elements:
-```python
-config = {
-    "section_name": {
-        "header": "[section_name]\n",
-        "elements": [
-                {
-                    "type": "comment",
-                    "content": "# This is a comment\n"
-                },
-                {
-                    "type": "option",
-                    "name": "option1",
-                    "value": "value1",
-                    "raw": "option1: value1\n"
-                },
-                {
-                    "type": "blank",
-                    "content": "\n"
-                },
-                {
-                    "type": "option_block",
-                    "name": "option2",
-                    "value": [
-                        "value2",
-                        "value3"
-                        ],
-                    "raw": "option2:"
-                }
-            ]
-        }
-    }
-```
--- a/kiauh/core/submodules/simple_config_parser/src/simple_config_parser/constants.py
+++ b/kiauh/core/submodules/simple_config_parser/src/simple_config_parser/constants.py
@@ -1,74 +0,0 @@
-# ======================================================================= #
-#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
-#                                                                         #
-#  https://github.com/dw-0/simple-config-parser                           #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-import re
-from enum import Enum
-
-# definition of section line:
-#  - then line MUST start with an opening square bracket - it is the first section marker
-#  - the section marker MUST be followed by at least one character - it is the section name
-#  - the section name MUST be followed by a closing square bracket - it is the second section marker
-#  - the second section marker MAY be followed by any amount of whitespace characters
-#  - the second section marker MAY be followed by a # or ; - it is the comment marker
-#  - the inline comment MAY be of any length and character
-SECTION_RE = re.compile(r"^\[(\S.*\S|\S)]\s*([#;].*)?$")
-
-# definition of option line:
-#  - the line MUST start with a word - it is the option name
-#  - the option name MUST be followed by a colon or an equal sign - it is the separator
-#  - the separator MUST be followed by a value
-#    - the separator MAY have any amount of leading or trailing whitespaces
-#    - the separator MUST NOT be directly followed by a colon or equal sign
-#  - the value MAY be of any length and character
-#    - the value MAY contain any amount of trailing whitespaces
-#    - the value MAY be followed by a # or ; - it is the comment marker
-#  - the inline comment MAY be of any length and character
-OPTION_RE = re.compile(r"^([^;#:=\s]+)\s?[:=]\s*([^;#:=\s][^;#]*?)\s*([#;].*)?$")
-# definition of options block start line:
-#  - the line MUST start with a word - it is the option name
-#  - the option name MUST be followed by a colon or an equal sign - it is the separator
-#  - the separator MUST NOT be followed by a value
-#    - the separator MAY have any amount of leading or trailing whitespaces
-#    - the separator MUST NOT be directly followed by a colon or equal sign
-#    - the separator MAY be followed by a # or ; - it is the comment marker
-#  - the inline comment MAY be of any length and character
-OPTIONS_BLOCK_START_RE = re.compile(r"^([^;#:=\s]+)\s*[:=]\s*([#;].*)?$")
-
-# definition of comment line:
-#  - the line MAY start with any amount of whitespace characters
-#  - the line MUST contain a # or ; - it is the comment marker
-#  - the comment marker MAY be followed by any amount of whitespace characters
-#  - the comment MAY be of any length and character
-LINE_COMMENT_RE = re.compile(r"^\s*[#;].*")
-
-# definition of empty line:
-#  - the line MUST contain only whitespace characters
-EMPTY_LINE_RE = re.compile(r"^\s*$")
-
-SAVE_CONFIG_START_RE = re.compile(r"^#\*# <-+ SAVE_CONFIG -+>$")
-SAVE_CONFIG_CONTENT_RE = re.compile(r"^#\*#.*$")
-
-BOOLEAN_STATES = {
-    "1": True,
-    "yes": True,
-    "true": True,
-    "on": True,
-    "0": False,
-    "no": False,
-    "false": False,
-    "off": False,
-}
-
-HEADER_IDENT = "#_header"
-
-INDENT = " " * 4
-
-class LineType(Enum):
-    OPTION = "option"
-    OPTION_BLOCK = "option_block"
-    COMMENT = "comment"
-    BLANK = "blank"
--- a/kiauh/core/submodules/simple_config_parser/src/simple_config_parser/simple_config_parser.py
+++ b/kiauh/core/submodules/simple_config_parser/src/simple_config_parser/simple_config_parser.py
@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#  Copyright (C) 2025 Dominik Willner <th33xitus@gmail.com>               #
 #                                                                         #
 #  https://github.com/dw-0/simple-config-parser                           #
 #                                                                         #
@@ -8,19 +8,89 @@

 from __future__ import annotations

+import re
+from dataclasses import dataclass, field
+from enum import Enum
 from pathlib import Path
-from typing import Callable, Dict, List
+from typing import Any, Callable, Dict, List, Set, Union

-from ..simple_config_parser.constants import (
-    BOOLEAN_STATES,
-    EMPTY_LINE_RE,
-    HEADER_IDENT,
-    LINE_COMMENT_RE,
-    OPTION_RE,
-    OPTIONS_BLOCK_START_RE,
-    SECTION_RE, LineType, INDENT, SAVE_CONFIG_START_RE, SAVE_CONFIG_CONTENT_RE,
+# definition of section line:
+#  - the line MUST start with an opening square bracket - it is the first section marker
+#  - the section marker MUST be followed by at least one character - it is the section name
+#  - the section name MUST be followed by a closing square bracket - it is the second section marker
+#  - the second section marker MAY be followed by any amount of whitespace characters
+#  - the second section marker MAY be followed by a # or ; - it is the comment marker
+#  - the inline comment MAY be of any length and character
+SECTION_RE = re.compile(r"^\[(\S.*\S|\S)]\s*([#;].*)?$")
+
+# definition of option line:
+#  - the line MUST start with a word - it is the option name
+#  - the option name MUST be followed by a colon or an equal sign - it is the separator
+#  - the separator MUST be followed by a value
+#    - the separator MAY have any amount of leading or trailing whitespaces
+#    - the separator MUST NOT be directly followed by a colon or equal sign
+#  - the value MAY be of any length and character
+#    - the value MAY contain any amount of trailing whitespaces
+#    - the value MAY be followed by a # or ; - it is the comment marker
+#  - the inline comment MAY be of any length and character
+OPTION_RE = re.compile(r"^([^;#:=\s]+)\s?[:=]\s*([^;#:=\s][^;#]*?)\s*([#;].*)?$")
+
+# definition of options block start line:
+#  - the line MUST start with a word - it is the option name
+#  - the option name MUST NOT be "gcode"
+#  - the option name MUST be followed by a colon or an equal sign - it is the separator
+#  - the separator MUST NOT be followed by a value
+#    - the separator MAY have any amount of leading or trailing whitespaces
+#    - the separator MUST NOT be directly followed by a colon or equal sign
+#    - the separator MAY be followed by a # or ; - it is the comment marker
+#  - the inline comment MAY be of any length and character
+OPTIONS_BLOCK_START_RE = re.compile(
+    r"^(?!\s*gcode\s*[:=])([^;#:=\s]+)\s*[:=]\s*([#;].*)?$"
 )

+# definition of gcode block start line:
+#  - the line MUST start with the word "gcode"
+#  - the word "gcode" MUST be followed by a colon or an equal sign - it is the separator
+#  - the separator MUST NOT be followed by a value
+#    - the separator MAY have any amount of leading or trailing whitespaces
+#    - the separator MUST NOT be directly followed by a colon or equal sign
+#    - the separator MAY be followed by a # or ; - it is the comment marker
+#  - the inline comment MAY be of any length and character
+GCODE_BLOCK_START_RE = re.compile(r"^\s*gcode\s*[:=]\s*(?:[#;].*)?$")
+
+# definition of comment line:
+#  - the line MAY start with any amount of whitespace characters
+#  - the line MUST contain a # or ; - it is the comment marker
+#  - the comment marker MAY be followed by any amount of whitespace characters
+#  - the comment MAY be of any length and character
+LINE_COMMENT_RE = re.compile(r"^\s*[#;].*")
+
+# definition of empty line:
+#  - the line MUST contain only whitespace characters
+EMPTY_LINE_RE = re.compile(r"^\s*$")
+
+SAVE_CONFIG_START_RE = re.compile(r"^#\*# <-+ SAVE_CONFIG -+>$")
+SAVE_CONFIG_CONTENT_RE = re.compile(r"^#\*#.*$")
+
+BOOLEAN_STATES = {
+    "1": True,
+    "yes": True,
+    "true": True,
+    "on": True,
+    "0": False,
+    "no": False,
+    "false": False,
+    "off": False,
+}
+
+
+class LineType(Enum):
+    OPTION = "option"
+    OPTION_BLOCK = "option_block"
+    COMMENT = "comment"
+    BLANK = "blank"
+
+
 _UNSET = object()


@@ -47,6 +117,7 @@ class NoOptionError(Exception):
        msg = f"Option '{option}' in section '{section}' is not defined"
        super().__init__(msg)

+
 class UnknownLineError(Exception):
    """Raised when a line is not recognized as any known type"""

@@ -55,17 +126,81 @@ class UnknownLineError(Exception):
        super().__init__(msg)


+@dataclass
+class Option:
+    """Dataclass representing a (pseudo) config option"""
+
+    name: str
+    raw: str
+    value: str
+
+
+@dataclass
+class MultiLineOption:
+    """Dataclass representing a multi-line config option"""
+
+    name: str
+    raw: str
+    values: List[MLOptionValue] = field(default_factory=list)
+
+
+@dataclass
+class MLOptionValue:
+    """Dataclass representing a value in a multi-line option"""
+
+    raw: str
+    indent: int
+    value: str
+
+
+@dataclass
+class Gcode:
+    """Dataclass representing a gcode block"""
+
+    name: str
+    raw: str
+    gcode: List[str] = field(default_factory=list)
+
+
+@dataclass
+class BlankLine:
+    """Dataclass representing a blank line"""
+
+    raw: str = "\n"
+
+
+@dataclass
+class CommentLine:
+    """Dataclass representing a comment line"""
+
+    raw: str
+
+
+SectionItem = Union[Option, MultiLineOption, Gcode, BlankLine, CommentLine]
+
+
+@dataclass
+class Section:
+    """Dataclass representing a config section"""
+
+    name: str
+    raw: str
+    items: List[SectionItem] = field(default_factory=list)
+
+
 # noinspection PyMethodMayBeStatic
 class SimpleConfigParser:
    """A customized config parser targeted at handling Klipper style config files"""

    def __init__(self) -> None:
-        self.header: List[str] = []
-        self.save_config_block: List[str] = []
        self.config: Dict = {}
-        self.current_section: str | None = None
-        self.current_opt_block: str | None = None
-        self.in_option_block: bool = False
+
+        self._header: List[str] = []
+        self._save_config_block: List[str] = []
+        self._config: List[Section] = []
+        self._curr_sect: Union[Section, None] = None
+        self._curr_ml_opt: Union[MultiLineOption, None] = None
+        self._curr_gcode: Union[Gcode, None] = None

    def _match_section(self, line: str) -> bool:
        """Whether the given line matches the definition of a section"""
@@ -79,6 +214,10 @@ class SimpleConfigParser:
        """Whether the given line matches the definition of a multiline option"""
        return OPTIONS_BLOCK_START_RE.match(line) is not None

+    def _match_gcode_block_start(self, line: str) -> bool:
+        """Whether the given line matches the definition of a gcode block start"""
+        return GCODE_BLOCK_START_RE.match(line) is not None
+
    def _match_save_config_start(self, line: str) -> bool:
        """Whether the given line matches the definition of a save config start"""
        return SAVE_CONFIG_START_RE.match(line) is not None
@@ -97,67 +236,112 @@ class SimpleConfigParser:

    def _parse_line(self, line: str) -> None:
        """Parses a line and determines its type"""
+        if self._curr_sect is None and not self._match_section(line):
+            # we are at the beginning of the file, so we consider the part
+            # up to the first section as the file header and store it separately
+            self._header.append(line)
+            return
+
        if self._match_section(line):
-            self.current_opt_block = None
-            self.current_section = SECTION_RE.match(line).group(1)
-            self.config[self.current_section] = {
-                "header": line,
-                "elements": []
-            }
+            self._reset_special_items()

-        elif self._match_option(line):
-            self.current_opt_block = None
-            option = OPTION_RE.match(line).group(1)
-            value = OPTION_RE.match(line).group(2)
-            self.config[self.current_section]["elements"].append({
-                "type": LineType.OPTION.value,
-                "name": option,
-                "value": value,
-                "raw": line
-            })
+            sect_name: str = SECTION_RE.match(line).group(1)
+            sect = Section(name=sect_name, raw=line)
+            self._curr_sect = sect
+            self._config.append(sect)
+            return

-        elif self._match_options_block_start(line):
-            option = OPTIONS_BLOCK_START_RE.match(line).group(1)
-            self.current_opt_block = option
-            self.config[self.current_section]["elements"].append({
-                "type": LineType.OPTION_BLOCK.value,
-                "name": option,
-                "value": [],
-                "raw": line
-            })
+        if self._match_option(line):
+            self._reset_special_items()

-        elif self.current_opt_block is not None:
-            # we are in an option block, so we add the line to the option's value
-            for element in reversed(self.config[self.current_section]["elements"]):
-                if element["type"] == LineType.OPTION_BLOCK.value and element["name"] == self.current_opt_block:
-                    element["value"].append(line.strip()) # indentation is removed
-                    break
+            name: str = OPTION_RE.match(line).group(1)
+            val: str = OPTION_RE.match(line).group(2)
+            opt = Option(
+                name=name,
+                raw=line,
+                value=val,
+            )
+            self._curr_sect.items.append(opt)
+            return

-        elif self._match_save_config_start(line):
-            self.current_opt_block = None
-            self.save_config_block.append(line)
+        if self._match_options_block_start(line):
+            self._reset_special_items()

-        elif self._match_save_config_content(line):
-            self.current_opt_block = None
-            self.save_config_block.append(line)
+            name: str = OPTIONS_BLOCK_START_RE.match(line).group(1)
+            ml_opt = MultiLineOption(
+                name=name,
+                raw=line,
+            )
+            self._curr_ml_opt = ml_opt
+            self._curr_sect.items.append(ml_opt)
+            return

-        elif self._match_empty_line(line) or self._match_line_comment(line):
-            self.current_opt_block = None
+        if self._curr_ml_opt is not None:
+            # we are in an option block, so we consecutively add values
+            # to the current multiline option until we hit a different line type

-            # if current_section is None, we are at the beginning of the file,
-            # so we consider the part up to the first section as the file header
-            if not self.current_section:
-                self.config.setdefault(HEADER_IDENT, []).append(line)
+            if "#" in line:
+                value = line.split("#", 1)[0].strip()
+            elif ";" in line:
+                value = line.split(";", 1)[0].strip()
            else:
-                element_type = LineType.BLANK.value if self._match_empty_line(line) else LineType.COMMENT.value
-                self.config[self.current_section]["elements"].append({
-                    "type": element_type,
-                    "content": line
-                })
+                value = line.strip()
+
+            ml_value = MLOptionValue(
+                raw=line,
+                indent=self._get_indent(line),
+                value=value,
+            )
+            self._curr_ml_opt.values.append(ml_value)
+            return
+
+        if self._match_gcode_block_start(line):
+            self._curr_gcode = Gcode(
+                name="gcode",
+                raw=line,
+            )
+            self._curr_sect.items.append(self._curr_gcode)
+            return
+
+        if self._curr_gcode is not None:
+            # we are in a gcode block, so we add any following line
+            # without further checks to the gcode block
+            self._curr_gcode.gcode.append(line)
+            return
+
+        if self._match_save_config_start(line):
+            self._reset_special_items()
+            self._save_config_block.append(line)
+            return
+
+        if self._match_save_config_content(line):
+            self._reset_special_items()
+            self._save_config_block.append(line)
+            return
+
+        if self._match_empty_line(line):
+            self._reset_special_items()
+            self._curr_sect.items.append(BlankLine(raw=line))
+            return
+
+        if self._match_line_comment(line):
+            self._reset_special_items()
+            self._curr_sect.items.append(CommentLine(raw=line))
+            return
+
+    def _reset_special_items(self) -> None:
+        """Reset special items like current multine option and gcode block"""
+        self._curr_ml_opt = None
+        self._curr_gcode = None
+
+    def _get_indent(self, line: str) -> int:
+        """Return the indentation level of a line"""
+        return len(line) - len(line.lstrip())

    def read_file(self, file: Path) -> None:
        """Read and parse a config file"""
-        with open(file, "r") as file:
+        self._config = []
+        with open(file, "r", encoding="utf-8") as file:
            for line in file:
                self._parse_line(line)

@@ -166,115 +350,72 @@ class SimpleConfigParser:
        if path is None:
            raise ValueError("File path cannot be None")

-        with open(path, "w", encoding="utf-8") as f:
-            if HEADER_IDENT in self.config:
-                for line in self.config[HEADER_IDENT]:
-                    f.write(line)
+        # first write the header
+        content: List[str] = list(self._header)

-            sections = self.get_sections()
-            for i, section in enumerate(sections):
-                f.write(self.config[section]["header"])
+        # then write all sections
+        for i in self._config:
+            content.append(i.raw)
+            for item in i.items:
+                content.append(item.raw)
+                if isinstance(item, MultiLineOption):
+                    content.extend(val.raw for val in item.values)
+                elif isinstance(item, Gcode):
+                    content.extend(item.gcode)

-                for element in self.config[section]["elements"]:
-                    if element["type"] == LineType.OPTION.value:
-                        f.write(element["raw"])
-                    elif element["type"] == LineType.OPTION_BLOCK.value:
-                        f.write(element["raw"])
-                        for line in element["value"]:
-                            f.write(INDENT + line.strip() + "\n")
-                    elif element["type"] in [LineType.COMMENT.value, LineType.BLANK.value]:
-                        f.write(element["content"])
-                    else:
-                        raise UnknownLineError(element["raw"])
+        # then write the save config block
+        content.extend(self._save_config_block)

-            # Ensure file ends with a single newline
-            if sections:  # Only if we have any sections
-                last_section = sections[-1]
-                last_elements = self.config[last_section]["elements"]
+        # ensure file ends with a newline
+        if content and not content[-1].endswith("\n"):
+            content.append("\n")

-                if last_elements:
-                    last_element = last_elements[-1]
-                    if "raw" in last_element:
-                        last_line = last_element["raw"]
-                    else:  # comment or blank line
-                        last_line = last_element["content"]
+        with open(path, "w", encoding="utf-8", newline="\n") as f:
+            f.writelines(content)

-                    if not last_line.endswith("\n"):
-                        f.write("\n")
-
-            if self.save_config_block:
-                for line in self.save_config_block:
-                    f.write(line)
-                f.write("\n")
-
-    def get_sections(self) -> List[str]:
-        """Return a list of all section names, but exclude any section starting with '#_'"""
-        return list(
-            filter(
-                lambda section: not section.startswith("#_"),
-                self.config.keys(),
-            )
-        )
+    def get_sections(self) -> Set[str]:
+        """Return a set of all section names"""
+        return {s.name for s in self._config} if self._config else set()

    def has_section(self, section: str) -> bool:
        """Check if a section exists"""
        return section in self.get_sections()

-    def add_section(self, section: str) -> None:
+    def add_section(self, section: str) -> Section:
        """Add a new section to the config"""
        if section in self.get_sections():
            raise DuplicateSectionError(section)

-        if len(self.get_sections()) >= 1:
-            self._check_set_section_spacing()
+        if not self._config:
+            new_sect = Section(name=section, raw=f"[{section}]\n")
+            self._config.append(new_sect)
+            return new_sect

-        self.config[section] = {
-            "header": f"[{section}]\n",
-            "elements": []
-        }
+        last_sect: Section = self._config[-1]
+        if not last_sect.items or (
+            last_sect.items and not isinstance(last_sect.items[-1], BlankLine)
+        ):
+            last_sect.items.append(BlankLine())

-    def _check_set_section_spacing(self):
-        """Check if there is a blank line between the last section and the new section"""
-        prev_section_name: str = self.get_sections()[-1]
-        prev_section = self.config[prev_section_name]
-        prev_elements = prev_section["elements"]
-
-        if prev_elements:
-            last_element = prev_elements[-1]
-
-            # If the last element is a comment or blank line
-            if last_element["type"] in [LineType.COMMENT.value, LineType.BLANK.value]:
-                last_content = last_element["content"]
-
-                # If the last element doesn't end with a newline, add one
-                if not last_content.endswith("\n"):
-                    last_element["content"] += "\n"
-
-                # If the last element is not a blank line, add a blank line
-                if last_content.strip() != "":
-                    prev_elements.append({
-                        "type": "blank",
-                        "content": "\n"
-                    })
-            else:
-                # If the last element is an option, add a blank line
-                prev_elements.append({
-                    "type": LineType.BLANK.value,
-                    "content": "\n"
-                })
+        new_sect = Section(name=section, raw=f"[{section}]\n")
+        self._config.append(new_sect)
+        return new_sect

    def remove_section(self, section: str) -> None:
-        """Remove a section from the config"""
-        self.config.pop(section, None)
+        """Remove a section from the config

-    def get_options(self, section: str) -> List[str]:
-        """Return a list of all option names for a given section"""
-        options = []
-        if self.has_section(section):
-            for element in self.config[section]["elements"]:
-                if element["type"] in [LineType.OPTION.value, LineType.OPTION_BLOCK.value]:
-                    options.append(element["name"])
-        return options
+        This will remove ALL occurences of sections with the given name.
+        """
+        self._config = [s for s in self._config if s.name != section]
+
+    def get_options(self, section: str) -> Set[str]:
+        """Return a set of all option names for a given section"""
+        sections: List[Section] = [s for s in self._config if s.name == section]
+        all_items: List[SectionItem] = [
+            item for section in sections for item in section.items
+        ]
+
+        return {o.name for o in all_items if isinstance(o, (Option, MultiLineOption))}

    def has_option(self, section: str, option: str) -> bool:
        """Check if an option exists in a section"""
@@ -285,56 +426,141 @@ class SimpleConfigParser:
        Set the value of an option in a section. If the section does not exist,
        it is created. If the option does not exist, it is created.
        """
-        if not self.has_section(section):
+
+        # when adding options, we add them to the first matching section
+        # if the section does not exist, we create it
+        section: Section = (
            self.add_section(section)
+            if not self.has_section(section)
+            else next(s for s in self._config if s.name == section)
+        )

-        # Check if option already exists
-        for element in self.config[section]["elements"]:
-            if element["type"] in [LineType.OPTION.value, LineType.OPTION_BLOCK.value] and element["name"] == option:
-                # Update existing option
-                if isinstance(value, list):
-                    element["type"] = LineType.OPTION_BLOCK.value
-                    element["value"] = value
-                    element["raw"] = f"{option}:\n"
-                else:
-                    element["type"] = LineType.OPTION.value
-                    element["value"] = value
-                    element["raw"] = f"{option}: {value}\n"
-                return
+        opt = self._find_option_by_name(option, section=section)
+        if opt is None:
+            if isinstance(value, list):
+                indent = 4
+                _opt = MultiLineOption(
+                    name=option,
+                    raw=f"{option}:\n",
+                    values=[
+                        MLOptionValue(
+                            raw=f"{' ' * indent}{val}\n",
+                            indent=indent,
+                            value=val,
+                        )
+                        for val in value
+                    ],
+                )
+            else:
+                _opt = Option(
+                    name=option,
+                    raw=f"{option}: {value}\n",
+                    value=value,
+                )

-        # Option doesn't exist, create new one
-        if isinstance(value, list):
-            new_element = {
-                "type": LineType.OPTION_BLOCK.value,
-                "name": option,
-                "value": value,
-                "raw": f"{option}:\n"
-            }
+            last_opt_idx: int = 0
+            for idx, item in enumerate(section.items):
+                if isinstance(item, (Option, MultiLineOption)):
+                    last_opt_idx = idx
+            # insert the new option after the last existing option
+            section.items.insert(last_opt_idx + 1, _opt)
+
+        elif opt and isinstance(opt, Option) and isinstance(value, str):
+            curr_val = opt.value
+            new_val = value
+            opt.value = new_val
+            opt.raw = opt.raw.replace(curr_val, new_val)
+
+        elif opt and isinstance(opt, MultiLineOption) and isinstance(value, list):
+            # note: we completely replace the existing values
+            # so any existing indentation, comments, etc. will be lost
+            indent = 4
+            opt.values = [
+                MLOptionValue(
+                    raw=f"{' ' * indent}{val}\n",
+                    indent=indent,
+                    value=val,
+                )
+                for val in value
+            ]
+
+    def _find_section_by_name(
+        self, sect_name: str
+    ) -> Union[None, Section, List[Section]]:
+        """Find a section by name"""
+        _sects = [s for s in self._config if s.name == sect_name]
+        if len(_sects) > 1:
+            return _sects
+        elif len(_sects) == 1:
+            return _sects[0]
        else:
-            new_element = {
-                "type": LineType.OPTION.value,
-                "name": option,
-                "value": value,
-                "raw": f"{option}: {value}\n"
-            }
+            return None

-        # scan through elements to find the last option, after which we insert the new option
-        insert_pos = 0
-        elements = self.config[section]["elements"]
-        for i, element in enumerate(elements):
-            if element["type"] in [LineType.OPTION.value, LineType.OPTION_BLOCK.value]:
-                insert_pos = i + 1
+    def _find_option_by_name(
+        self,
+        opt_name: str,
+        section: Union[Section, None] = None,
+        sections: Union[List[Section], None] = None,
+    ) -> Union[None, Option, MultiLineOption]:
+        """Find an option or multi-line option by name in a section"""

-        elements.insert(insert_pos, new_element)
+        # if a single section is provided, search its items for the option
+        if section is not None:
+            for item in section.items:
+                if (
+                    isinstance(item, (Option, MultiLineOption))
+                    and item.name == opt_name
+                ):
+                    return item
+
+        # if multiple sections with the same name are provided, merge their
+        # items and search for the option
+        if sections is not None:
+            all_items: List[SectionItem] = [
+                item for sect in sections for item in sect.items
+            ]
+            for item in all_items:
+                if (
+                    isinstance(item, (Option, MultiLineOption))
+                    and item.name == opt_name
+                ):
+                    return item
+
+        return None

    def remove_option(self, section: str, option: str) -> None:
-        """Remove an option from a section"""
-        if self.has_section(section):
-            elements = self.config[section]["elements"]
-            for i, element in enumerate(elements):
-                if element["type"] in [LineType.OPTION.value, LineType.OPTION_BLOCK.value] and element["name"] == option:
-                    elements.pop(i)
-                    break
+        """Remove an option from a section
+
+        This will remove the option from ALL occurences of sections with the given name.
+        Other non-option items (comments, blank lines, etc.) are preserved.
+        """
+        sections: List[Section] = [s for s in self._config if s.name == section]
+        if not sections:
+            return
+
+        for sect in sections:
+            sect.items = [
+                item
+                for item in sect.items
+                if not (
+                    isinstance(item, (Option, MultiLineOption)) and item.name == option
+                )
+            ]
+
+    def _get_option(
+        self, section: str, option: str
+    ) -> Union[Option, MultiLineOption, None]:
+        """Internal helper to resolve an option or multi-line option."""
+        if section not in self.get_sections():
+            raise NoSectionError(section)
+        if option not in self.get_options(section):
+            raise NoOptionError(option, section)
+        sects: List[Section] = [s for s in self._config if s.name == section]
+        return (
+            self._find_option_by_name(option, sections=sects)
+            if len(sects) > 1
+            else self._find_option_by_name(option, section=sects[0])
+        )

    def getval(self, section: str, option: str, fallback: str | _UNSET = _UNSET) -> str:
        """
@@ -344,22 +570,20 @@ class SimpleConfigParser:
        a fallback value.
        """
        try:
-            if section not in self.get_sections():
-                raise NoSectionError(section)
-            if option not in self.get_options(section):
+            opt = self._get_option(section, option)
+            if not isinstance(opt, Option):
                raise NoOptionError(option, section)

-            for element in self.config[section]["elements"]:
-                if element["type"] is LineType.OPTION.value and element["name"] == option:
-                    return str(element["value"].strip().replace("\n", ""))
-            return ""
+            return opt.value if opt else ""

        except (NoSectionError, NoOptionError):
            if fallback is _UNSET:
                raise
            return fallback

-    def getvals(self, section: str, option: str, fallback: List[str] | _UNSET = _UNSET) -> List[str]:
+    def getvals(
+        self, section: str, option: str, fallback: List[str] | _UNSET = _UNSET
+    ) -> List[str]:
        """
        Return the values of the given multi-line option in the given section

@@ -367,15 +591,11 @@ class SimpleConfigParser:
        a fallback value.
        """
        try:
-            if section not in self.get_sections():
-                raise NoSectionError(section)
-            if option not in self.get_options(section):
+            opt = self._get_option(section, option)
+            if not isinstance(opt, MultiLineOption):
                raise NoOptionError(option, section)

-            for element in self.config[section]["elements"]:
-                if element["type"] is LineType.OPTION_BLOCK.value and element["name"] == option:
-                    return [val.strip() for val in element["value"] if val.strip()]
-            return []
+            return [v.value for v in opt.values] if opt else []

        except (NoSectionError, NoOptionError):
            if fallback is _UNSET:
@@ -413,7 +633,7 @@ class SimpleConfigParser:
        section: str,
        option: str,
        conv: Callable[[str], int | float | bool],
-        fallback: _UNSET = _UNSET,
+        fallback: Any = _UNSET,
    ) -> int | float | bool:
        """Return the value of the given option in the given section as a converted value"""
        try:
--- a/kiauh/core/submodules/simple_config_parser/tests/assets/test_gcode.cfg
+++ b/kiauh/core/submodules/simple_config_parser/tests/assets/test_gcode.cfg
@@ -0,0 +1,14 @@
+# Header line
+# Another header comment
+[toolhead]
+option_a: 1
+option_b: true
+
+[gcode_macro test]
+gcode: # start gcode block
+    G28 ; home all
+    M118 Done ; echo
+    G1 X10 Y10 F3000
+
+
+
--- a/kiauh/core/submodules/simple_config_parser/tests/line_matching/match_gcode_block_start/init.py
+++ b/kiauh/core/submodules/simple_config_parser/tests/line_matching/match_gcode_block_start/init.py
--- a/kiauh/core/submodules/simple_config_parser/tests/line_matching/match_gcode_block_start/test_data/matching_data.txt
+++ b/kiauh/core/submodules/simple_config_parser/tests/line_matching/match_gcode_block_start/test_data/matching_data.txt
@@ -0,0 +1,16 @@
+gcode:
+gcode:
+gcode: # comment
+gcode: ; comment
+gcode :
+gcode :
+gcode : # comment
+gcode : ; comment
+gcode=
+gcode=
+gcode= # comment
+gcode= ; comment
+gcode =
+gcode =
+gcode = # comment
+gcode = ; comment
--- a/kiauh/core/submodules/simple_config_parser/tests/line_matching/match_gcode_block_start/test_data/non_matching_data.txt
+++ b/kiauh/core/submodules/simple_config_parser/tests/line_matching/match_gcode_block_start/test_data/non_matching_data.txt
@@ -0,0 +1,39 @@
+type: jsonfile
+path: /dev/shm/drying_box.json
+baud: 250000
+minimum_cruise_ratio: 0.5
+square_corner_velocity: 5.0
+full_steps_per_rotation: 200
+position_min: 0
+homing_speed: 5.0
+# baud: 250000
+# minimum_cruise_ratio: 0.5
+# square_corner_velocity: 5.0
+# full_steps_per_rotation: 200
+# position_min: 0
+# homing_speed: 5.0
+
+option:
+option :
+option :
+option=
+option =
+option =
+
+
+### this is a comment
+; this is also a comment
+;
+#
+homing_speed::
+homing_speed::
+homing_speed ::
+homing_speed ::
+homing_speed==
+homing_speed==
+homing_speed ==
+homing_speed ==
+homing_speed :=
+homing_speed :=
+homing_speed =:
+homing_speed =:
--- a/kiauh/core/submodules/simple_config_parser/tests/line_matching/match_gcode_block_start/test_match_gcode_block_start.py
+++ b/kiauh/core/submodules/simple_config_parser/tests/line_matching/match_gcode_block_start/test_match_gcode_block_start.py
@@ -0,0 +1,39 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from pathlib import Path
+
+import pytest
+
+from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from tests.utils import load_testdata_from_file
+
+BASE_DIR = Path(__file__).parent.joinpath("test_data")
+MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
+NON_MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("non_matching_data.txt")
+
+
+@pytest.fixture
+def parser():
+    return SimpleConfigParser()
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(MATCHING_TEST_DATA_PATH))
+def test_match_gcode_block_start(parser, line):
+    """Test that a line matches the definition of an options block start"""
+    assert parser._match_gcode_block_start(line) is True, (
+        f"Expected line '{line}' to match gcode block start definition!"
+    )
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(NON_MATCHING_TEST_DATA_PATH))
+def test_non_matching_gcode_block_start(parser, line):
+    """Test that a line does not match the definition of an options block start"""
+    assert parser._match_gcode_block_start(line) is False, (
+        f"Expected line '{line}' to not match gcode block start definition!"
+    )
--- a/kiauh/core/submodules/simple_config_parser/tests/line_matching/match_option_block_start/test_data/matching_data.txt
+++ b/kiauh/core/submodules/simple_config_parser/tests/line_matching/match_option_block_start/test_data/matching_data.txt
@@ -1,5 +1,4 @@
 trusted_clients:
-gcode:
 cors_domains:
 an_options_block_start_with_comment: ; this is a comment
 an_options_block_start_with_comment: # this is a comment
--- a/kiauh/core/submodules/simple_config_parser/tests/line_matching/match_option_block_start/test_data/non_matching_data.txt
+++ b/kiauh/core/submodules/simple_config_parser/tests/line_matching/match_option_block_start/test_data/non_matching_data.txt
@@ -29,3 +29,9 @@ homing_speed :=
 homing_speed :=
 homing_speed =:
 homing_speed =:
+gcode:
+gcode :
+gcode :
+gcode=
+gcode =
+gcode =
--- a/kiauh/core/submodules/simple_config_parser/tests/line_parsing/test_line_parsing.py
+++ b/kiauh/core/submodules/simple_config_parser/tests/line_parsing/test_line_parsing.py
@@ -5,75 +5,217 @@
 #                                                                         #
 #  This file may be distributed under the terms of the GNU GPLv3 license  #
 # ======================================================================= #
-import json
 from pathlib import Path
+from typing import List

 import pytest

-from src.simple_config_parser.constants import HEADER_IDENT, LineType
-from src.simple_config_parser.simple_config_parser import SimpleConfigParser
-from tests.utils import load_testdata_from_file
+from src.simple_config_parser.simple_config_parser import (
+    BlankLine,
+    CommentLine,
+    MLOptionValue,
+    MultiLineOption,
+    Option,
+    Section,
+    SimpleConfigParser,
+)

-BASE_DIR = Path(__file__).parent.parent.joinpath("assets")
-TEST_DATA_PATH = BASE_DIR.joinpath("test_config_1.cfg")
+ASSETS_DIR = Path(__file__).parent.parent / "assets"
+TEST_CFG = ASSETS_DIR / "test_config_1.cfg"


-@pytest.fixture
-def parser():
-    parser = SimpleConfigParser()
-    for line in load_testdata_from_file(TEST_DATA_PATH):
-        parser._parse_line(line)  # noqa
-
-    return parser
+@pytest.fixture()
+def parser() -> SimpleConfigParser:
+    p = SimpleConfigParser()
+    p.read_file(TEST_CFG)
+    return p


-def test_section_parsing(parser):
-    expected_keys = {"section_1", "section_2", "section_3", "section_4"}
-    assert expected_keys.issubset(
-        parser.config.keys()
-    ), f"Expected keys: {expected_keys}, got: {parser.config.keys()}"
-    assert parser.in_option_block is False
-    assert parser.current_section == parser.get_sections()[-1]
-    assert parser.config["section_2"] is not None
-    assert parser.config["section_2"]["header"] == "[section_2] ; comment"
-    assert parser.config["section_2"]["elements"] is not None
-    assert len(parser.config["section_2"]["elements"]) > 0
+# ----------------------------- Helper utils ----------------------------- #


-def test_option_parsing(parser):
-    assert parser.config["section_1"]["elements"][0]["type"] == LineType.OPTION.value
-    assert parser.config["section_1"]["elements"][0]["name"] == "option_1"
-    assert parser.config["section_1"]["elements"][0]["value"] == "value_1"
-    assert parser.config["section_1"]["elements"][0]["raw"] == "option_1: value_1"
+def _get_section(p: SimpleConfigParser, name: str) -> Section:
+    sect = [s for s in p._config if s.name == name]
+    assert sect, f"Section '{name}' not found"
+    return sect[0]


-def test_header_parsing(parser):
-    header = parser.config[HEADER_IDENT]
-    assert isinstance(header, list)
-    assert len(header) > 0
+def _get_option(sect: Section, name: str):
+    for item in sect.items:
+        if isinstance(item, (Option, MultiLineOption)) and item.name == name:
+            return item
+    return None


-def test_option_block_parsing(parser):
-    section = "section number 5"
-    option_block = None
-    for element in parser.config[section]["elements"]:
-        if (element["type"] == LineType.OPTION_BLOCK.value and
-            element["name"] == "multi_option"):
-            option_block = element
-            break
+# ------------------------------ Basic parsing --------------------------- #

-    assert option_block is not None, "multi_option block not found"
-    assert option_block["type"] == LineType.OPTION_BLOCK.value
-    assert option_block["name"] == "multi_option"
-    assert option_block["raw"] == "multi_option:"

-    expected_values = [
-        "# these are multi-line values",
-        "value_5_1",
-        "value_5_2 ; here is a comment",
-        "value_5_3"
-    ]
-    assert option_block["value"] == expected_values, (
-        f"Expected values: {expected_values}, "
-        f"got: {option_block['value']}"
+def test_header_lines_preserved(parser: SimpleConfigParser):
+    # Lines before first section become header; ensure we captured them
+    assert parser._header, "Header should not be empty"
+    # The first section name should not appear inside header lines
+    assert all("[section_1]" not in ln for ln in parser._header)
+    # Ensure comments retained verbatim
+    assert any("a comment at the very top" in ln for ln in parser._header)
+
+
+def test_section_names(parser: SimpleConfigParser):
+    expected = {"section_1", "section_2", "section_3", "section_4", "section number 5"}
+    assert parser.get_sections() == expected
+
+
+def test_section_raw_line(parser: SimpleConfigParser):
+    s2 = _get_section(parser, "section_2")
+    assert s2.raw.startswith("[section_2]")
+    assert "; comment" in s2.raw
+
+
+def test_single_line_option_parsing(parser: SimpleConfigParser):
+    s1 = _get_section(parser, "section_1")
+    opt = _get_option(s1, "option_1")
+    assert isinstance(opt, Option)
+    assert opt.name == "option_1"
+    assert opt.value == "value_1"
+    assert opt.raw.strip() == "option_1: value_1"
+
+
+def test_other_single_line_option_values(parser: SimpleConfigParser):
+    s1 = _get_section(parser, "section_1")
+    bool_opt = _get_option(s1, "option_1_1")
+    int_opt = _get_option(s1, "option_1_2")
+    float_opt = _get_option(s1, "option_1_3")
+    assert isinstance(bool_opt, Option) and bool_opt.value == "True"
+    assert isinstance(int_opt, Option) and int_opt.value.startswith("5")
+    assert isinstance(float_opt, Option) and float_opt.value.startswith("1.123")
+
+
+def test_comment_and_blank_lines_preserved(parser: SimpleConfigParser):
+    s4 = _get_section(parser, "section_4")
+    # Expect first item is a comment line, followed by an option
+    assert any(isinstance(i, CommentLine) for i in s4.items), "Comment line missing"
+    # Ensure at least one blank line exists in some section
+    assert any(isinstance(i, BlankLine) for s in parser._config for i in s.items), (
+        "No blank lines parsed"
    )
+
+
+def test_multiline_option_parsing(parser: SimpleConfigParser):
+    s5 = _get_section(parser, "section number 5")
+    ml = _get_option(s5, "multi_option")
+    assert isinstance(ml, MultiLineOption), "multi_option should be a MultiLineOption"
+    # Raw line ends with ':'
+    assert ml.raw.strip().startswith("multi_option:")
+    values: List[MLOptionValue] = ml.values
+    # Ensure values captured (includes comment lines inside block)
+    assert len(values) >= 4
+    trimmed_values = [v.value for v in values]
+    # Comments are stripped from value field; original raw retains them
+    assert trimmed_values[0] == "" or "multi-line" not in trimmed_values[0], (
+        "First value should be empty or comment stripped"
+    )
+    assert "value_5_1" in trimmed_values
+    assert any("value_5_2" == v for v in trimmed_values)
+    assert any("value_5_3" == v for v in trimmed_values)
+    # Indentation should be consistent (4 spaces in test data)
+    assert all(v.indent == 4 for v in values), "Indentation should be 4 spaces"
+
+
+def test_option_after_multiline_block(parser: SimpleConfigParser):
+    s5 = _get_section(parser, "section number 5")
+    opt = _get_option(s5, "option_5_1")
+    assert isinstance(opt, Option)
+    assert opt.value == "value_5_1"
+
+
+def test_getval_and_conversions(parser: SimpleConfigParser):
+    assert parser.getval("section_1", "option_1") == "value_1"
+    assert parser.getboolean("section_1", "option_1_1") is True
+    assert parser.getint("section_1", "option_1_2") == 5
+    assert abs(parser.getfloat("section_1", "option_1_3") - 1.123) < 1e-9
+
+
+def test_getval_fallback(parser: SimpleConfigParser):
+    assert parser.getval("missing_section", "missing", fallback="fb") == "fb"
+    assert parser.getint("missing_section", "missing", fallback=42) == 42
+
+
+def test_getvals_on_multiline_option(parser: SimpleConfigParser):
+    vals = parser.getvals("section number 5", "multi_option")
+    # Should not include inline comments, should capture cleaned values
+    assert any(v == "value_5_2" for v in vals)
+
+
+def test_round_trip_write(tmp_path: Path, parser: SimpleConfigParser):
+    out_file = tmp_path / "round_trip.cfg"
+    parser.write_file(out_file)
+    original = TEST_CFG.read_text(encoding="utf-8")
+    written = out_file.read_text(encoding="utf-8")
+    # Files should match exactly (parser aims for perfect reproduction)
+    assert original == written, "Round-trip file content mismatch"
+
+
+def test_set_option_adds_and_updates(parser: SimpleConfigParser):
+    # Add new option
+    parser.set_option("section_3", "new_opt", "some_value")
+    s3 = _get_section(parser, "section_3")
+    new_opt = _get_option(s3, "new_opt")
+    assert isinstance(new_opt, Option) and new_opt.value == "some_value"
+    # Update existing option value
+    parser.set_option("section_3", "new_opt", "other")
+    new_opt_after = _get_option(s3, "new_opt")
+    assert new_opt_after.value == "other"
+
+
+def test_set_option_multiline(parser: SimpleConfigParser):
+    parser.set_option("section_2", "multi_new", ["a", "b", "c"])
+    s2 = _get_section(parser, "section_2")
+    ml = _get_option(s2, "multi_new")
+    assert isinstance(ml, MultiLineOption)
+    assert [v.value for v in ml.values] == ["a", "b", "c"]
+
+
+def test_remove_section(parser: SimpleConfigParser):
+    parser.remove_section("section_4")
+    assert "section_4" not in parser.get_sections()
+
+
+def test_remove_option(parser: SimpleConfigParser):
+    parser.remove_option("section_1", "option_1")
+    s1 = _get_section(parser, "section_1")
+    assert _get_option(s1, "option_1") is None
+
+
+def test_multiline_option_comment_stripping(parser: SimpleConfigParser):
+    # Ensure inline comments removed from value attribute but remain in raw
+    s5 = _get_section(parser, "section number 5")
+    ml = _get_option(s5, "multi_option")
+    assert isinstance(ml, MultiLineOption)
+    raw_with_comment = [v.raw for v in ml.values if "; here is a comment" in v.raw]
+    assert raw_with_comment, "Expected raw line with inline comment"
+    # Corresponding cleaned value should not contain the comment part
+    cleaned_match = [v.value for v in ml.values if v.value == "value_5_2"]
+    assert cleaned_match, "Expected cleaned value 'value_5_2' without comment"
+
+
+def test_blank_lines_between_sections(parser: SimpleConfigParser):
+    # Ensure at least one blank line exists before section_2 (from original file structure)
+    idx_section_1 = [i for i, s in enumerate(parser._config) if s.name == "section_1"][
+        0
+    ]
+    idx_section_2 = [i for i, s in enumerate(parser._config) if s.name == "section_2"][
+        0
+    ]
+    # Collect lines after section_1 items end until next section raw
+    assert idx_section_2 == idx_section_1 + 1, "Sections not consecutive as expected"
+    # Validate section_2 has a preceding blank line inside previous section or header logic
+    s1 = _get_section(parser, "section_1")
+    assert any(isinstance(i, BlankLine) for i in s1.items), (
+        "Expected blank line at end of section_1"
+    )
+
+
+def test_write_preserves_trailing_newline(tmp_path: Path, parser: SimpleConfigParser):
+    out_file = tmp_path / "ensure_newline.cfg"
+    parser.write_file(out_file)
+    content = out_file.read_bytes()
+    assert content.endswith(b"\n"), "Written file must end with newline"
--- a/kiauh/core/submodules/simple_config_parser/tests/line_parsing/test_multiline_update_behavior.py
+++ b/kiauh/core/submodules/simple_config_parser/tests/line_parsing/test_multiline_update_behavior.py
@@ -0,0 +1,65 @@
+# ======================================================================= #
+#  Tests: Verhalten beim Aktualisieren von Multiline-Optionen            #
+# ======================================================================= #
+from pathlib import Path
+
+from src.simple_config_parser.simple_config_parser import (
+    BlankLine,
+    MultiLineOption,
+    SimpleConfigParser,
+)
+
+ASSETS_DIR = Path(__file__).parent.parent / "assets"
+TEST_CFG = ASSETS_DIR / "test_config_1.cfg"
+
+
+def test_update_existing_multiline_option_replaces_values_and_drops_comments(tmp_path):
+    parser = SimpleConfigParser()
+    parser.read_file(TEST_CFG)
+
+    assert parser.getvals("section number 5", "multi_option")
+    orig_values = parser.getvals("section number 5", "multi_option")
+    assert "value_5_2" in orig_values
+
+    new_values = ["alpha", "beta", "gamma"]
+    parser.set_option("section number 5", "multi_option", new_values)
+
+    updated = parser.getvals("section number 5", "multi_option")
+    assert updated == new_values
+
+    sect = [s for s in parser._config if s.name == "section number 5"][0]
+    ml = [
+        i
+        for i in sect.items
+        if isinstance(i, MultiLineOption) and i.name == "multi_option"
+    ][0]
+    assert all("value_5_2" not in v.value for v in ml.values)
+    # Nach komplettem Replace keine alten Inline-Kommentare mehr
+    assert all("; here is a comment" not in v.raw for v in ml.values)
+
+    out_file = tmp_path / "updated_multiline.cfg"
+    parser.write_file(out_file)
+    assert out_file.read_text(encoding="utf-8").endswith("\n")
+
+
+def test_add_section_inserts_blank_line_if_needed():
+    parser = SimpleConfigParser()
+    parser.read_file(TEST_CFG)
+
+    last_before = parser._config[-1]
+    had_blank_before = bool(last_before.items) and isinstance(
+        last_before.items[-1], BlankLine
+    )
+
+    parser.add_section("new_last_section")
+    assert parser.has_section("new_last_section")
+
+    # Vorherige letzte Section wurde ggf. um eine BlankLine erweitert
+    prev_last = [s for s in parser._config if s.name == last_before.name][0]
+    if not had_blank_before:
+        assert isinstance(prev_last.items[-2], BlankLine) or isinstance(
+            prev_last.items[-1], BlankLine
+        )
+    else:
+        # Falls bereits BlankLine vorhanden war, bleibt sie bestehen
+        assert isinstance(prev_last.items[-1], BlankLine)
--- a/kiauh/core/submodules/simple_config_parser/tests/public_api/conftest.py
+++ b/kiauh/core/submodules/simple_config_parser/tests/public_api/conftest.py
@@ -10,17 +10,19 @@ from pathlib import Path
 import pytest

 from src.simple_config_parser.simple_config_parser import SimpleConfigParser
-from tests.utils import load_testdata_from_file

 BASE_DIR = Path(__file__).parent.parent.joinpath("assets")
-CONFIG_FILES = ["test_config_1.cfg", "test_config_2.cfg", "test_config_3.cfg", "test_config_4.cfg"]
+CONFIG_FILES = [
+    "test_config_1.cfg",
+    "test_config_2.cfg",
+    "test_config_3.cfg",
+    "test_config_4.cfg",
+]


@pytest.fixture(params=CONFIG_FILES)
 def parser(request):
    parser = SimpleConfigParser()
    file_path = BASE_DIR.joinpath(request.param)
-    for line in load_testdata_from_file(file_path):
-        parser._parse_line(line)  # noqa
-
+    parser.read_file(file_path)
    return parser
--- a/kiauh/core/submodules/simple_config_parser/tests/public_api/test_gcode_block.py
+++ b/kiauh/core/submodules/simple_config_parser/tests/public_api/test_gcode_block.py
@@ -0,0 +1,27 @@
+from pathlib import Path
+
+from src.simple_config_parser.simple_config_parser import Gcode, SimpleConfigParser
+
+ASSETS = Path(__file__).parent.parent / "assets"
+GCODE_FILE = ASSETS / "test_gcode.cfg"
+
+
+def test_gcode_block_parsing():
+    parser = SimpleConfigParser()
+    parser.read_file(GCODE_FILE)
+
+    assert "gcode_macro test" in parser.get_sections()
+    sect = [s for s in parser._config if s.name == "gcode_macro test"][0]
+    gcode_items = [i for i in sect.items if isinstance(i, Gcode)]
+    assert gcode_items, "No Gcode block found in section"
+
+    gc = gcode_items[0]
+    assert gc.raw.strip().startswith("gcode:")
+    assert any("G28" in ln for ln in gc.gcode)
+    assert any("M118" in ln for ln in gc.gcode)
+    assert all(ln.startswith("    ") or ln == "\n" for ln in gc.gcode if ln.strip())
+
+    tmp_out = GCODE_FILE.parent / "tmp_gcode_roundtrip.cfg"
+    parser.write_file(tmp_out)
+    assert tmp_out.read_text(encoding="utf-8") == GCODE_FILE.read_text(encoding="utf-8")
+    tmp_out.unlink()
--- a/kiauh/core/submodules/simple_config_parser/tests/public_api/test_options_api.py
+++ b/kiauh/core/submodules/simple_config_parser/tests/public_api/test_options_api.py
@@ -8,41 +8,33 @@

 import pytest

-from src.simple_config_parser.constants import LineType
 from src.simple_config_parser.simple_config_parser import (
+    MultiLineOption,
    NoOptionError,
    NoSectionError,
+    SimpleConfigParser,
 )


-def test_get_options(parser):
+def test_get_options(parser: SimpleConfigParser):
    expected_options = {
-        "section_1": {"option_1"},
+        "section_1": {"option_1", "option_1_1", "option_1_2", "option_1_3"},
        "section_2": {"option_2"},
        "section_3": {"option_3"},
        "section_4": {"option_4"},
        "section number 5": {"option_5", "multi_option", "option_5_1"},
    }
-
-    for section, options in expected_options.items():
-        assert options.issubset(
-            parser.get_options(section)
-        ), f"Expected options: {options} in section: {section}, got: {parser.get_options(section)}"
-        assert "_raw" not in parser.get_options(section)
-        assert all(
-            not option.startswith("#_") for option in parser.get_options(section)
-        )
+    for sect, opts in expected_options.items():
+        assert opts.issubset(parser.get_options(sect))


 def test_has_option(parser):
    assert parser.has_option("section_1", "option_1") is True
    assert parser.has_option("section_1", "option_128") is False
-    # section does not exist:
    assert parser.has_option("section_128", "option_1") is False


 def test_getval(parser):
-    # test regular option values
    assert parser.getval("section_1", "option_1") == "value_1"
    assert parser.getval("section_3", "option_3") == "value_3"
    assert parser.getval("section_4", "option_4") == "value_4"
@@ -50,137 +42,69 @@ def test_getval(parser):
    assert parser.getval("section number 5", "option_5_1") == "value_5_1"
    assert parser.getval("section_2", "option_2") == "value_2"

-    # test multiline option values
-    ml_val = parser.getvals("section number 5", "multi_option")
-    assert isinstance(ml_val, list)
-    assert len(ml_val) > 0
+
+def test_getvals_multiline(parser):
+    vals = parser.getvals("section number 5", "multi_option")
+    assert isinstance(vals, list) and len(vals) >= 3
+    assert "value_5_2" in vals


 def test_getval_fallback(parser):
-    assert parser.getval("section_1", "option_128", "fallback") == "fallback"
-    assert parser.getval("section_1", "option_128", None) is None
+    assert parser.getval("section_1", "option_128", fallback="fallback") == "fallback"
+    with pytest.raises(NoOptionError):
+        parser.getval("section_1", "option_128")


 def test_getval_exceptions(parser):
    with pytest.raises(NoSectionError):
        parser.getval("section_128", "option_1")
-
    with pytest.raises(NoOptionError):
        parser.getval("section_1", "option_128")


-def test_getint(parser):
-    value = parser.getint("section_1", "option_1_2")
-    assert isinstance(value, int)
+def test_type_conversions(parser):
+    assert parser.getint("section_1", "option_1_2") == 5
+    assert pytest.approx(parser.getfloat("section_1", "option_1_3"), rel=1e-9) == 1.123
+    assert parser.getboolean("section_1", "option_1_1") is True


-def test_getint_from_val(parser):
+def test_type_conversion_errors(parser):
    with pytest.raises(ValueError):
        parser.getint("section_1", "option_1")
-
-
-def test_getint_from_float(parser):
-    with pytest.raises(ValueError):
-        parser.getint("section_1", "option_1_3")
-
-
-def test_getint_from_boolean(parser):
-    with pytest.raises(ValueError):
-        parser.getint("section_1", "option_1_1")
-
-
-def test_getint_fallback(parser):
-    assert parser.getint("section_1", "option_128", 128) == 128
-    assert parser.getint("section_1", "option_128", None) is None
-
-
-def test_getboolean(parser):
-    value = parser.getboolean("section_1", "option_1_1")
-    assert isinstance(value, bool)
-    assert value is True or value is False
-
-
-def test_getboolean_from_val(parser):
    with pytest.raises(ValueError):
        parser.getboolean("section_1", "option_1")
-
-
-def test_getboolean_from_int(parser):
-    with pytest.raises(ValueError):
-        parser.getboolean("section_1", "option_1_2")
-
-
-def test_getboolean_from_float(parser):
-    with pytest.raises(ValueError):
-        parser.getboolean("section_1", "option_1_3")
-
-
-def test_getboolean_fallback(parser):
-    assert parser.getboolean("section_1", "option_128", True) is True
-    assert parser.getboolean("section_1", "option_128", False) is False
-    assert parser.getboolean("section_1", "option_128", None) is None
-
-
-def test_getfloat(parser):
-    value = parser.getfloat("section_1", "option_1_3")
-    assert isinstance(value, float)
-
-
-def test_getfloat_from_val(parser):
    with pytest.raises(ValueError):
        parser.getfloat("section_1", "option_1")


-def test_getfloat_from_int(parser):
-    value = parser.getfloat("section_1", "option_1_2")
-    assert isinstance(value, float)
+def test_type_conversion_fallbacks(parser):
+    assert parser.getint("section_1", "missing", fallback=99) == 99
+    assert parser.getfloat("section_1", "missing", fallback=3.14) == 3.14
+    assert parser.getboolean("section_1", "missing", fallback=False) is False


-def test_getfloat_from_boolean(parser):
-    with pytest.raises(ValueError):
-        parser.getfloat("section_1", "option_1_1")
+def test_set_option_creates_and_updates(parser):
+    parser.set_option("section_1", "new_option", "nv")
+    assert parser.getval("section_1", "new_option") == "nv"
+    parser.set_option("section_1", "new_option", "nv2")
+    assert parser.getval("section_1", "new_option") == "nv2"


-def test_getfloat_fallback(parser):
-    assert parser.getfloat("section_1", "option_128", 1.234) == 1.234
-    assert parser.getfloat("section_1", "option_128", None) is None
-
-
-def test_set_existing_option(parser):
-    parser.set_option("section_1", "new_option", "new_value")
-    assert parser.getval("section_1", "new_option") == "new_value"
-    assert parser.config["section_1"]["elements"][4] is not None
-    assert parser.config["section_1"]["elements"][4]["type"] == LineType.OPTION.value
-    assert parser.config["section_1"]["elements"][4]["name"] == "new_option"
-    assert parser.config["section_1"]["elements"][4]["value"] == "new_value"
-    assert parser.config["section_1"]["elements"][4]["raw"] == "new_option: new_value\n"
-
-
-def test_set_new_option(parser):
-    parser.set_option("new_section", "very_new_option", "very_new_value")
-    assert (
-        parser.has_section("new_section") is True
-    ), f"Expected 'new_section' in {parser.get_sections()}"
-    assert parser.getval("new_section", "very_new_option") == "very_new_value"
-
+def test_set_multiline_option(parser):
    parser.set_option("section_2", "array_option", ["value_1", "value_2", "value_3"])
-    assert parser.getvals("section_2", "array_option") == [
-        "value_1",
-        "value_2",
-        "value_3",
-    ]
-
-    assert parser.config["section_2"]["elements"][1] is not None
-    assert parser.config["section_2"]["elements"][1]["type"] == LineType.OPTION_BLOCK.value
-    assert parser.config["section_2"]["elements"][1]["name"] == "array_option"
-    assert parser.config["section_2"]["elements"][1]["value"] == [
-        "value_1",
-        "value_2",
-        "value_3",
-    ]
-    assert parser.config["section_2"]["elements"][1]["raw"] == "array_option:\n"
+    vals = parser.getvals("section_2", "array_option")
+    assert vals == ["value_1", "value_2", "value_3"]
+    # Prüfe Typ
+    sect = [s for s in parser._config if s.name == "section_2"][0]
+    ml = [
+        i
+        for i in sect.items
+        if isinstance(i, MultiLineOption) and i.name == "array_option"
+    ][0]
+    assert isinstance(ml, MultiLineOption)
+    assert ml.raw == "array_option:\n"


 def test_remove_option(parser):
    parser.remove_option("section_1", "option_1")
-    assert parser.has_option("section_1", "option_1") is False
+    assert not parser.has_option("section_1", "option_1")
--- a/kiauh/core/submodules/simple_config_parser/tests/public_api/test_read_file.py
+++ b/kiauh/core/submodules/simple_config_parser/tests/public_api/test_read_file.py
@@ -7,16 +7,32 @@
 # ======================================================================= #
 from pathlib import Path

-from src.simple_config_parser.simple_config_parser import (
-    SimpleConfigParser,
-)
+from src.simple_config_parser.simple_config_parser import Section, SimpleConfigParser

-BASE_DIR = Path(__file__).parent.parent.joinpath("assets")
-TEST_DATA_PATH = BASE_DIR.joinpath("test_config_1.cfg")
+BASE_DIR = Path(__file__).parent.parent / "assets"
+TEST_DATA_PATH = BASE_DIR / "test_config_1.cfg"


-def test_read_file():
+def test_read_file_sections_and_header():
    parser = SimpleConfigParser()
    parser.read_file(TEST_DATA_PATH)
-    assert parser.config is not None
-    assert parser.config.keys() is not None
+
+    # Header erhalten
+    assert parser._header, "Header darf nicht leer sein"
+    assert any("a comment at the very top" in ln for ln in parser._header)
+
+    # Sektionen korrekt eingelesen
+    expected = {"section_1", "section_2", "section_3", "section_4", "section number 5"}
+    assert parser.get_sections() == expected
+
+    # Reihenfolge bleibt erhalten
+    assert [s.name for s in parser._config] == [
+        "section_1",
+        "section_2",
+        "section_3",
+        "section_4",
+        "section number 5",
+    ]
+
+    # Jede Section ist ein Section-Dataclass
+    assert all(isinstance(s, Section) for s in parser._config)
--- a/kiauh/core/submodules/simple_config_parser/tests/public_api/test_sections_api.py
+++ b/kiauh/core/submodules/simple_config_parser/tests/public_api/test_sections_api.py
@@ -14,16 +14,17 @@ from src.simple_config_parser.simple_config_parser import (


 def test_get_sections(parser):
-    expected_keys = {
+    expected_core = {
        "section_1",
        "section_2",
        "section_3",
        "section_4",
        "section number 5",
    }
-    assert expected_keys.issubset(
-        parser.get_sections()
-    ), f"Expected keys: {expected_keys}, got: {parser.get_sections()}"
+    parsed = parser.get_sections()
+    assert expected_core.issubset(parsed), (
+        f"Missing core sections: {expected_core - parsed}"
+    )


 def test_has_section(parser):
@@ -39,18 +40,6 @@ def test_add_section(parser):
    assert parser.has_section("new_section2") is True
    assert len(parser.get_sections()) == pre_add_count + 2

-    new_section = parser.config["new_section"]
-    assert isinstance(new_section, dict)
-    assert new_section["header"] == "[new_section]\n"
-    assert new_section["elements"] is not None
-    assert new_section["elements"] == []
-
-    new_section2 = parser.config["new_section2"]
-    assert isinstance(new_section2, dict)
-    assert new_section2["header"] == "[new_section2]\n"
-    assert new_section2["elements"] is not None
-    assert new_section2["elements"] == []
-

 def test_add_section_duplicate(parser):
    with pytest.raises(DuplicateSectionError):
@@ -62,4 +51,3 @@ def test_remove_section(parser):
    parser.remove_section("section_1")
    assert parser.has_section("section_1") is False
    assert len(parser.get_sections()) == pre_remove_count - 1
-    assert "section_1" not in parser.config
--- a/kiauh/core/submodules/simple_config_parser/tests/public_api/test_write_file.py
+++ b/kiauh/core/submodules/simple_config_parser/tests/public_api/test_write_file.py
@@ -9,110 +9,91 @@ from pathlib import Path

 import pytest

-from src.simple_config_parser.simple_config_parser import (
-    SimpleConfigParser,
-)
+from src.simple_config_parser.simple_config_parser import SimpleConfigParser

-BASE_DIR = Path(__file__).parent.parent.joinpath("assets")
-TEST_DATA_PATH = BASE_DIR.joinpath("test_config_1.cfg")
-# TEST_DATA_PATH_2 = BASE_DIR.joinpath("test_config_1_write.cfg")
+BASE_DIR = Path(__file__).parent.parent / "assets"
+TEST_DATA_PATH = BASE_DIR / "test_config_1.cfg"


 def test_write_file_exception():
    parser = SimpleConfigParser()
    with pytest.raises(ValueError):
-        parser.write_file(None)  # noqa
+        parser.write_file(None)  # noqa: intentionally invalid


 def test_write_to_file(tmp_path):
-    tmp_file = Path(tmp_path).joinpath("tmp_config.cfg")
+    tmp_file = Path(tmp_path) / "tmp_config.cfg"
    parser1 = SimpleConfigParser()
    parser1.read_file(TEST_DATA_PATH)
-    # parser1.write_file(TEST_DATA_PATH_2)
    parser1.write_file(tmp_file)

    parser2 = SimpleConfigParser()
    parser2.read_file(tmp_file)

    assert tmp_file.exists()
-    assert parser2.config is not None
+    # gleiche Sections & Round-Trip identisch
+    assert parser2.get_sections() == parser1.get_sections()
+    assert tmp_file.read_text(encoding="utf-8") == TEST_DATA_PATH.read_text(
+        encoding="utf-8"
+    )

-    with open(TEST_DATA_PATH, "r") as original, open(tmp_file, "r") as written:
-        assert original.read() == written.read()

 def test_remove_option_and_write(tmp_path):
-    # Setup paths
-    test_dir = BASE_DIR.joinpath("write_tests/remove_option")
-    input_file = test_dir.joinpath("input.cfg")
-    expected_file = test_dir.joinpath("expected.cfg")
-    output_file = Path(tmp_path).joinpath("output.cfg")
+    test_dir = BASE_DIR / "write_tests" / "remove_option"
+    input_file = test_dir / "input.cfg"
+    expected_file = test_dir / "expected.cfg"
+    output_file = Path(tmp_path) / "output.cfg"

-    # Read input file and remove option
    parser = SimpleConfigParser()
    parser.read_file(input_file)
    parser.remove_option("section_1", "option_to_remove")
-
-    # Write modified config
    parser.write_file(output_file)
-    # parser.write_file(test_dir.joinpath("output.cfg"))

-    # Compare with expected output
-    with open(expected_file, "r") as expected, open(output_file, "r") as actual:
-        assert expected.read() == actual.read()
+    assert output_file.read_text(encoding="utf-8") == expected_file.read_text(
+        encoding="utf-8"
+    )

-    # Additional verification
    parser2 = SimpleConfigParser()
    parser2.read_file(output_file)
    assert not parser2.has_option("section_1", "option_to_remove")

-def test_remove_section_and_write(tmp_path):
-    # Setup paths
-    test_dir = BASE_DIR.joinpath("write_tests/remove_section")
-    input_file = test_dir.joinpath("input.cfg")
-    expected_file = test_dir.joinpath("expected.cfg")
-    output_file = Path(tmp_path).joinpath("output.cfg")

-    # Read input file and remove section
+def test_remove_section_and_write(tmp_path):
+    test_dir = BASE_DIR / "write_tests" / "remove_section"
+    input_file = test_dir / "input.cfg"
+    expected_file = test_dir / "expected.cfg"
+    output_file = Path(tmp_path) / "output.cfg"
+
    parser = SimpleConfigParser()
    parser.read_file(input_file)
    parser.remove_section("section_to_remove")
-
-    # Write modified config
    parser.write_file(output_file)
-    # parser.write_file(test_dir.joinpath("output.cfg"))

-    # Compare with expected output
-    with open(expected_file, "r") as expected, open(output_file, "r") as actual:
-        assert expected.read() == actual.read()
+    assert output_file.read_text(encoding="utf-8") == expected_file.read_text(
+        encoding="utf-8"
+    )

-    # Additional verification
    parser2 = SimpleConfigParser()
    parser2.read_file(output_file)
    assert not parser2.has_section("section_to_remove")
-    assert "section_1" in parser2.get_sections()
-    assert "section_2" in parser2.get_sections()
+    assert {"section_1", "section_2"}.issubset(parser2.get_sections())
+

 def test_add_option_and_write(tmp_path):
-    # Setup paths
-    test_dir = BASE_DIR.joinpath("write_tests/add_option")
-    input_file = test_dir.joinpath("input.cfg")
-    expected_file = test_dir.joinpath("expected.cfg")
-    output_file = Path(tmp_path).joinpath("output.cfg")
+    test_dir = BASE_DIR / "write_tests" / "add_option"
+    input_file = test_dir / "input.cfg"
+    expected_file = test_dir / "expected.cfg"
+    output_file = Path(tmp_path) / "output.cfg"

-    # Read input file and add option
    parser = SimpleConfigParser()
    parser.read_file(input_file)
    parser.set_option("section_1", "new_option", "new_value")
-
-    # Write modified config
    parser.write_file(output_file)
-    # parser.write_file(test_dir.joinpath("output.cfg"))

-    # Compare with expected output
-    with open(expected_file, "r") as expected, open(output_file, "r") as actual:
-        assert expected.read() == actual.read()
+    assert output_file.read_text(encoding="utf-8") == expected_file.read_text(
+        encoding="utf-8"
+    )

-    # Additional verification
    parser2 = SimpleConfigParser()
    parser2.read_file(output_file)
    assert parser2.has_option("section_1", "new_option")
--- a/kiauh/core/submodules/simple_config_parser/tests/value_conversion/test_get_conv.py
+++ b/kiauh/core/submodules/simple_config_parser/tests/value_conversion/test_get_conv.py
@@ -10,80 +10,58 @@ from pathlib import Path
 import pytest

 from src.simple_config_parser.simple_config_parser import SimpleConfigParser
-from tests.utils import load_testdata_from_file

-BASE_DIR = Path(__file__).parent.parent.joinpath("assets")
-TEST_DATA_PATH = BASE_DIR.joinpath("test_config_1.cfg")
+BASE_DIR = Path(__file__).parent.parent / "assets"
+TEST_DATA_PATH = BASE_DIR / "test_config_1.cfg"


@pytest.fixture
 def parser():
-    parser = SimpleConfigParser()
-    for line in load_testdata_from_file(TEST_DATA_PATH):
-        parser._parse_line(line)  # noqa
-
-    return parser
+    p = SimpleConfigParser()
+    p.read_file(TEST_DATA_PATH)
+    return p


 def test_get_int_conv(parser):
-    should_be_int = parser._get_conv("section_1", "option_1_2", int)
-    assert isinstance(should_be_int, int)
+    assert parser.getint("section_1", "option_1_2") == 5


 def test_get_float_conv(parser):
-    should_be_float = parser._get_conv("section_1", "option_1_3", float)
-    assert isinstance(should_be_float, float)
+    assert pytest.approx(parser.getfloat("section_1", "option_1_3"), rel=1e-9) == 1.123


 def test_get_bool_conv(parser):
-    should_be_bool = parser._get_conv(
-        "section_1", "option_1_1", parser._convert_to_boolean
-    )
-    assert isinstance(should_be_bool, bool)
+    assert parser.getboolean("section_1", "option_1_1") is True


 def test_get_int_conv_fallback(parser):
-    should_be_fallback_int = parser._get_conv(
-        "section_1", "option_128", int, fallback=128
-    )
-    assert isinstance(should_be_fallback_int, int)
-    assert should_be_fallback_int == 128
-    assert parser._get_conv("section_1", "option_128", int, None) is None
+    assert parser.getint("section_1", "missing", fallback=128) == 128
+    with pytest.raises(Exception):
+        parser.getint("section_1", "missing")


 def test_get_float_conv_fallback(parser):
-    should_be_fallback_float = parser._get_conv(
-        "section_1", "option_128", float, fallback=1.234
-    )
-    assert isinstance(should_be_fallback_float, float)
-    assert should_be_fallback_float == 1.234
-
-    assert parser._get_conv("section_1", "option_128", float, None) is None
+    assert parser.getfloat("section_1", "missing", fallback=1.234) == 1.234
+    with pytest.raises(Exception):
+        parser.getfloat("section_1", "missing")


 def test_get_bool_conv_fallback(parser):
-    should_be_fallback_bool = parser._get_conv(
-        "section_1", "option_128", parser._convert_to_boolean, fallback=True
-    )
-    assert isinstance(should_be_fallback_bool, bool)
-    assert should_be_fallback_bool is True
-
-    assert (
-        parser._get_conv("section_1", "option_128", parser._convert_to_boolean, None)
-        is None
-    )
+    assert parser.getboolean("section_1", "missing", fallback=True) is True
+    with pytest.raises(Exception):
+        parser.getboolean("section_1", "missing")


 def test_get_int_conv_exception(parser):
    with pytest.raises(ValueError):
-        parser._get_conv("section_1", "option_1", int)
+        parser.getint("section_1", "option_1")


 def test_get_float_conv_exception(parser):
    with pytest.raises(ValueError):
-        parser._get_conv("section_1", "option_1", float)
+        parser.getfloat("section_1", "option_1")


 def test_get_bool_conv_exception(parser):
    with pytest.raises(ValueError):
-        parser._get_conv("section_1", "option_1", parser._convert_to_boolean)
+        parser.getboolean("section_1", "option_1")
--- a/kiauh/extensions/gcode_shell_cmd/assets/gcode_shell_command.py
+++ b/kiauh/extensions/gcode_shell_cmd/assets/gcode_shell_command.py
@@ -16,6 +16,7 @@ class ShellCommand:
        self.gcode = self.printer.lookup_object("gcode")
        cmd = config.get("command")
        cmd = os.path.expanduser(cmd)
+        cmd = os.path.expandvars(cmd)
        self.command = shlex.split(cmd)
        self.timeout = config.getfloat("timeout", 2.0, above=0.0)
        self.verbose = config.getboolean("verbose", True)
--- a/kiauh/extensions/gcode_shell_cmd/gcode_shell_cmd_extension.py
+++ b/kiauh/extensions/gcode_shell_cmd/gcode_shell_cmd_extension.py
@@ -9,12 +9,13 @@

 import os
 import shutil
+from datetime import datetime
 from typing import List

 from components.klipper.klipper import Klipper
-from core.backup_manager.backup_manager import BackupManager
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import Logger
+from core.services.backup_service import BackupService
 from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
@@ -106,14 +107,16 @@ class GcodeShellCmdExtension(BaseExtension):
                shutil.copy(EXAMPLE_CFG_SRC, cfg_dir)
                Logger.print_ok("Done!")
            except OSError as e:
-                Logger.warn(f"Unable to create example config: {e}")
+                Logger.print_error(f"Unable to create example config: {e}")

        # backup each printer.cfg before modification
-        bm = BackupManager()
+        svc = BackupService()
+        timestamp = datetime.now().strftime("%Y%m%d-%H%M%S")
        for instance in instances:
-            bm.backup_file(
-                instance.cfg_file,
-                custom_filename=f"{instance.suffix}.printer.cfg",
+            svc.backup_file(
+                source_path=instance.cfg_file,
+                target_path=f"{instance.data_dir.name}/config_{timestamp}",
+                target_name=instance.cfg_file.name,
            )

        # add section to printer.cfg if not already defined
--- a/kiauh/extensions/mobileraker/init.py
+++ b/kiauh/extensions/mobileraker/init.py
@@ -9,7 +9,6 @@

 from pathlib import Path

-from core.backup_manager import BACKUP_ROOT_DIR
 from core.constants import SYSTEMD

 # repo
@@ -23,7 +22,6 @@ MOBILERAKER_LOG_NAME = "mobileraker.log"
 # directories
 MOBILERAKER_DIR = Path.home().joinpath("mobileraker_companion")
 MOBILERAKER_ENV_DIR = Path.home().joinpath("mobileraker-env")
-MOBILERAKER_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("mobileraker-backups")

 # files
 MOBILERAKER_INSTALL_SCRIPT = MOBILERAKER_DIR.joinpath("scripts/install.sh")
--- a/kiauh/extensions/mobileraker/mobileraker_extension.py
+++ b/kiauh/extensions/mobileraker/mobileraker_extension.py
@@ -13,13 +13,12 @@ from typing import List

 from components.klipper.klipper import Klipper
 from components.moonraker.moonraker import Moonraker
-from core.backup_manager.backup_manager import BackupManager
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
 from core.settings.kiauh_settings import KiauhSettings
 from extensions.base_extension import BaseExtension
 from extensions.mobileraker import (
-    MOBILERAKER_BACKUP_DIR,
    MOBILERAKER_DIR,
    MOBILERAKER_ENV_DIR,
    MOBILERAKER_INSTALL_SCRIPT,
@@ -152,6 +151,7 @@ class MobilerakerExtension(BaseExtension):
                Logger.print_status(
                    "Removing Mobileraker's companion from update manager ..."
                )
+                BackupService().backup_moonraker_conf()
                remove_config_section(MOBILERAKER_UPDATER_SECTION_NAME, mr_instances)
                Logger.print_ok(
                    "Mobileraker's companion successfully removed from update manager!"
@@ -163,6 +163,7 @@ class MobilerakerExtension(BaseExtension):
            Logger.print_error(f"Error removing Mobileraker's companion:\n{e}")

    def _patch_mobileraker_update_manager(self, instances: List[Moonraker]) -> None:
+        BackupService().backup_moonraker_conf()
        add_config_section(
            section=MOBILERAKER_UPDATER_SECTION_NAME,
            instances=instances,
@@ -179,14 +180,14 @@ class MobilerakerExtension(BaseExtension):
        )

    def _backup_mobileraker_dir(self) -> None:
-        bm = BackupManager()
-        bm.backup_directory(
-            MOBILERAKER_DIR.name,
-            source=MOBILERAKER_DIR,
-            target=MOBILERAKER_BACKUP_DIR,
+        svc = BackupService()
+        svc.backup_directory(
+            source_path=MOBILERAKER_DIR,
+            backup_name="mobileraker",
+            target_path="mobileraker",
        )
-        bm.backup_directory(
-            MOBILERAKER_ENV_DIR.name,
-            source=MOBILERAKER_ENV_DIR,
-            target=MOBILERAKER_BACKUP_DIR,
+        svc.backup_directory(
+            source_path=MOBILERAKER_ENV_DIR,
+            backup_name="mobileraker-env",
+            target_path="mobileraker",
        )
--- a/kiauh/extensions/obico/moonraker_obico_extension.py
+++ b/kiauh/extensions/obico/moonraker_obico_extension.py
@@ -14,6 +14,7 @@ from components.moonraker.moonraker import Moonraker
 from core.instance_manager.base_instance import SUFFIX_BLACKLIST
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
 from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
@@ -31,7 +32,10 @@ from extensions.obico import (
 from extensions.obico.moonraker_obico import (
    MoonrakerObico,
 )
-from utils.common import check_install_dependencies, moonraker_exists
+from utils.common import (
+    check_install_dependencies,
+    moonraker_exists,
+)
 from utils.config_utils import (
    add_config_section,
    remove_config_section,
@@ -119,6 +123,8 @@ class ObicoExtension(BaseExtension):

            cmd_sysctl_manage("daemon-reload")

+            BackupService().backup_printer_config_dir()
+
            # add to klippers config
            self._patch_printer_cfg(kl_instances)
            InstanceManager.restart_all(kl_instances)
@@ -165,6 +171,7 @@ class ObicoExtension(BaseExtension):
            self._remove_obico_instances(ob_instances)
            self._remove_obico_dir()
            self._remove_obico_env()
+            BackupService().backup_printer_config_dir()
            remove_config_section(f"include {OBICO_MACROS_CFG_NAME}", kl_instances)
            remove_config_section(f"include {OBICO_UPDATE_CFG_NAME}", mr_instances)
            Logger.print_dialog(
--- a/kiauh/extensions/octoapp/octoapp_extension.py
+++ b/kiauh/extensions/octoapp/octoapp_extension.py
@@ -13,6 +13,7 @@ from components.klipper.klipper import Klipper
 from components.moonraker.moonraker import Moonraker
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
 from extensions.base_extension import BaseExtension
 from extensions.octoapp import (
    OA_DEPS_JSON_FILE,
@@ -133,6 +134,7 @@ class OctoappExtension(BaseExtension):
            self._remove_OA_store_dirs()
            self._remove_OA_dir()
            self._remove_OA_env()
+            BackupService().backup_moonraker_conf()
            remove_config_section(f"include {OA_SYS_CFG_NAME}", mr_instances)
            run_remove_routines(OA_INSTALLER_LOG_FILE)
            Logger.print_dialog(
--- a/kiauh/extensions/octoeverywhere/octoeverywhere_extension.py
+++ b/kiauh/extensions/octoeverywhere/octoeverywhere_extension.py
@@ -12,6 +12,7 @@ from typing import List
 from components.moonraker.moonraker import Moonraker
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
 from extensions.base_extension import BaseExtension
 from extensions.octoeverywhere import (
    OE_DEPS_JSON_FILE,
@@ -133,6 +134,7 @@ class OctoeverywhereExtension(BaseExtension):
            self._remove_oe_instances(ob_instances)
            self._remove_oe_dir()
            self._remove_oe_env()
+            BackupService().backup_moonraker_conf()
            remove_config_section(f"include {OE_SYS_CFG_NAME}", mr_instances)
            run_remove_routines(OE_INSTALLER_LOG_FILE)
            Logger.print_dialog(
--- a/kiauh/extensions/simply_print/simply_print_extension.py
+++ b/kiauh/extensions/simply_print/simply_print_extension.py
@@ -11,11 +11,12 @@ from typing import List
 from components.moonraker.moonraker import Moonraker
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
 from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
    SimpleConfigParser,
 )
 from extensions.base_extension import BaseExtension
-from utils.common import backup_printer_config_dir, moonraker_exists
+from utils.common import moonraker_exists
 from utils.input_utils import get_confirm


@@ -112,10 +113,10 @@ class SimplyPrintExtension(BaseExtension):
                continue

            if is_install and not scp.has_section("simplyprint"):
-                backup_printer_config_dir()
+                BackupService().backup_printer_config_dir()
                scp.add_section(section)
            elif not is_install and scp.has_section("simplyprint"):
-                backup_printer_config_dir()
+                BackupService().backup_printer_config_dir()
                scp.remove_section(section)
            scp.write_file(moonraker.cfg_file)
            patched_files.append(moonraker.cfg_file)
--- a/kiauh/extensions/spoolman/spoolman_extension.py
+++ b/kiauh/extensions/spoolman/spoolman_extension.py
@@ -8,6 +8,7 @@
 # ======================================================================= #

 import re
+from pathlib import Path
 from subprocess import CalledProcessError, run
 from typing import List, Tuple

@@ -15,9 +16,9 @@ from components.moonraker.moonraker import Moonraker
 from components.moonraker.services.moonraker_instance_service import (
    MoonrakerInstanceService,
 )
-from core.backup_manager.backup_manager import BackupManager
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
 from extensions.base_extension import BaseExtension
 from extensions.spoolman import (
    SPOOLMAN_COMPOSE_FILE,
@@ -100,6 +101,7 @@ class SpoolmanExtension(BaseExtension):
        mr_instances: List[Moonraker] = mrsvc.get_all_instances()

        Logger.print_status("Removing Spoolman configuration from moonraker.conf...")
+        BackupService().backup_moonraker_conf()
        remove_config_section("spoolman", mr_instances)

        Logger.print_status("Removing Spoolman from moonraker.asvc...")
@@ -123,16 +125,15 @@ class SpoolmanExtension(BaseExtension):
                    "Failed to remove Spoolman image! Please remove it manually."
                )

-        # backup Spoolman directory to ~/spoolman_data-<timestamp> before removing it
        try:
-            bm = BackupManager()
-            result = bm.backup_directory(
-                f"{SPOOLMAN_DIR.name}_data",
-                source=SPOOLMAN_DIR,
-                target=SPOOLMAN_DIR.parent,
+            svc = BackupService()
+            success = svc.backup_directory(
+                source_path=SPOOLMAN_DIR,
+                backup_name="spoolman",
+                target_path="spoolman",
            )
-            if result:
-                Logger.print_ok(f"Spoolman data backed up to {result}")
+            if success:
+                Logger.print_ok(f"Spoolman data backed up to {success}")
                Logger.print_status("Removing Spoolman directory...")
                if run_remove_routines(SPOOLMAN_DIR):
                    Logger.print_ok("Spoolman directory removed!")
@@ -290,6 +291,7 @@ class SpoolmanExtension(BaseExtension):
        mrsvc.load_instances()
        mr_instances = mrsvc.get_all_instances()

+        BackupService().backup_moonraker_conf()
        # noinspection HttpUrlsUsage
        add_config_section(
            section="spoolman",
@@ -310,13 +312,19 @@ class SpoolmanExtension(BaseExtension):
        mrsvc.load_instances()
        mr_instances = mrsvc.get_all_instances()
        for instance in mr_instances:
-            asvc_path = instance.data_dir.joinpath("moonraker.asvc")
-            if asvc_path.exists():
-                if "Spoolman" in open(asvc_path).read():
-                    Logger.print_info(f"Spoolman already in {asvc_path}. Skipping...")
-                    continue
+            asvc_path: Path = instance.data_dir.joinpath("moonraker.asvc")
+            if asvc_path.exists() and asvc_path.is_file():
+                with open(asvc_path, "a+") as f:
+                    if "Spoolman" in f.read():
+                        Logger.print_info(
+                            f"Spoolman already in {asvc_path}. Skipping..."
+                        )
+                        continue
+
+                    content: List[str] = f.readlines()
+                    if content and not content[-1].endswith("\n"):
+                        f.write("\n")

-                with open(asvc_path, "a") as f:
                    f.write("Spoolman\n")

                Logger.print_ok(f"Spoolman added to {asvc_path}!")
--- a/kiauh/extensions/telegram_bot/moonraker_telegram_bot_extension.py
+++ b/kiauh/extensions/telegram_bot/moonraker_telegram_bot_extension.py
@@ -13,6 +13,7 @@ from typing import List
 from components.moonraker.moonraker import Moonraker
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
+from core.services.backup_service import BackupService
 from extensions.base_extension import BaseExtension
 from extensions.telegram_bot import TG_BOT_REPO, TG_BOT_REQ_FILE
 from extensions.telegram_bot.moonraker_telegram_bot import (
@@ -105,6 +106,7 @@ class TelegramBotExtension(BaseExtension):
            cmd_sysctl_manage("daemon-reload")

            # add to moonraker update manager
+            BackupService().backup_moonraker_conf()
            self._patch_bot_update_manager(mr_instances)

            # restart moonraker
@@ -150,6 +152,7 @@ class TelegramBotExtension(BaseExtension):
            self._remove_bot_instances(tb_instances)
            self._remove_bot_dir()
            self._remove_bot_env()
+            BackupService().backup_moonraker_conf()
            remove_config_section("update_manager moonraker-telegram-bot", mr_instances)
            self._delete_bot_logs(tb_instances)
        except Exception as e:
--- a/kiauh/main.py
+++ b/kiauh/main.py
@@ -27,3 +27,7 @@ def main() -> None:
        MainMenu().run()
    except KeyboardInterrupt:
        Logger.print_ok("\nHappy printing!\n", prefix=False)
+
+
+if __name__ == "__main__":
+    main()
--- a/kiauh/procedures/switch_repo.py
+++ b/kiauh/procedures/switch_repo.py
@@ -13,7 +13,6 @@ from pathlib import Path
 from typing import Literal

 from components.klipper import (
-    KLIPPER_BACKUP_DIR,
    KLIPPER_DIR,
    KLIPPER_ENV_DIR,
    KLIPPER_REQ_FILE,
@@ -21,7 +20,6 @@ from components.klipper import (
 from components.klipper.klipper import Klipper
 from components.klipper.klipper_utils import install_klipper_packages
 from components.moonraker import (
-    MOONRAKER_BACKUP_DIR,
    MOONRAKER_DIR,
    MOONRAKER_ENV_DIR,
    MOONRAKER_REQ_FILE,
@@ -30,10 +28,10 @@ from components.moonraker.moonraker import Moonraker
 from components.moonraker.services.moonraker_setup_service import (
    install_moonraker_packages,
 )
-from core.backup_manager.backup_manager import BackupManager, BackupManagerException
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import Logger
-from utils.git_utils import GitException, get_repo_name, git_clone_wrapper
+from core.services.backup_service import BackupService
+from utils.git_utils import GitException, git_clone_wrapper
 from utils.instance_utils import get_instances
 from utils.sys_utils import (
    VenvCreationFailedException,
@@ -52,7 +50,6 @@ def run_switch_repo_routine(
    repo_dir: Path = KLIPPER_DIR if name == "klipper" else MOONRAKER_DIR
    env_dir: Path = KLIPPER_ENV_DIR if name == "klipper" else MOONRAKER_ENV_DIR
    req_file = KLIPPER_REQ_FILE if name == "klipper" else MOONRAKER_REQ_FILE
-    backup_dir: Path = KLIPPER_BACKUP_DIR if name == "klipper" else MOONRAKER_BACKUP_DIR
    _type = Klipper if name == "klipper" else Moonraker

    # step 1: stop all instances
@@ -64,19 +61,17 @@ def run_switch_repo_routine(
    env_dir_backup_path: Path | None = None

    try:
-        # step 2: backup old repo and env
-        org, _ = get_repo_name(repo_dir)
-        backup_dir = backup_dir.joinpath(org)
-        bm = BackupManager()
-        repo_dir_backup_path = bm.backup_directory(
-            repo_dir.name,
-            repo_dir,
-            backup_dir,
+        svc = BackupService()
+        svc.backup_directory(
+            source_path=repo_dir,
+            backup_name=name,
+            target_path=name,
        )
-        env_dir_backup_path = bm.backup_directory(
-            env_dir.name,
-            env_dir,
-            backup_dir,
+        env_backup_name: str = f"{name if name == 'moonraker' else 'klippy'}-env"
+        svc.backup_directory(
+            source_path=env_dir,
+            backup_name=env_backup_name,
+            target_path=name,
        )

        if not (repo_url or branch):
@@ -101,10 +96,6 @@ def run_switch_repo_routine(

        Logger.print_ok(f"Switched to {repo_url} at branch {branch}!")

-    except BackupManagerException as e:
-        Logger.print_error(f"Error during backup of repository: {e}")
-        raise RepoSwitchFailedException(e)
-
    except (GitException, VenvCreationFailedException) as e:
        # if something goes wrong during cloning or recreating the virtualenv,
        # we restore the backup of the repo and env
@@ -122,6 +113,9 @@ def run_switch_repo_routine(
        Logger.print_error(f"Something went wrong: {e}")
        return

+    except Exception as e:
+        raise RepoSwitchFailedException(e)
+
    Logger.print_status(f"Restarting all {_type.__name__} instances ...")
    InstanceManager.start_all(instances)

--- a/kiauh/utils/common.py
+++ b/kiauh/utils/common.py
@@ -14,11 +14,9 @@ from datetime import datetime
 from pathlib import Path
 from typing import Dict, List, Literal, Set

-from components.klipper.klipper import Klipper
 from components.moonraker.moonraker import Moonraker
 from core.constants import (
    GLOBAL_DEPS,
-    PRINTER_DATA_BACKUP_DIR,
 )
 from core.logger import DialogType, Logger
 from core.types.color import Color
@@ -151,26 +149,6 @@ def get_install_status(
    )


-def backup_printer_config_dir() -> None:
-    # local import to prevent circular import
-    from core.backup_manager.backup_manager import BackupManager
-
-    instances: List[Klipper] = get_instances(Klipper)
-    bm = BackupManager()
-
-    if not instances:
-        Logger.print_info("Unable to find directory to backup!")
-        Logger.print_info("Are there no Klipper instances installed?")
-        return
-
-    for instance in instances:
-        bm.backup_directory(
-            instance.data_dir.name,
-            source=instance.base.cfg_dir,
-            target=PRINTER_DATA_BACKUP_DIR,
-        )
-
-
 def moonraker_exists(name: str = "") -> List[Moonraker]:
    """
    Helper method to check if a Moonraker instance exists
--- a/kiauh/utils/config_utils.py
+++ b/kiauh/utils/config_utils.py
@@ -48,7 +48,9 @@ def add_config_section(

        if options is not None:
            for option in reversed(options):
-                scp.set_option(section, option[0], option[1])
+                opt_name = option[0]
+                opt_value = option[1]
+                scp.set_option(section, opt_name, opt_value)

        scp.write_file(cfg_file)

@@ -73,7 +75,7 @@ def add_config_section_at_top(section: str, instances: List[InstanceType]) -> No
            tmp.writelines(org_content)

        cfg_file.unlink()
-        shutil.move(tmp_cfg_path, cfg_file)
+        shutil.move(tmp_cfg_path.as_posix(), cfg_file)

        Logger.print_ok("OK!")

@@ -81,7 +83,7 @@ def add_config_section_at_top(section: str, instances: List[InstanceType]) -> No
 def remove_config_section(
    section: str, instances: List[InstanceType]
 ) -> List[InstanceType]:
-    removed_from: List[instances] = []
+    removed_from: List[InstanceType] = []
    for instance in instances:
        cfg_file = instance.cfg_file
        Logger.print_status(f"Remove section '[{section}]' from '{cfg_file}' ...")
--- a/kiauh/utils/git_utils.py
+++ b/kiauh/utils/git_utils.py
@@ -1,7 +1,6 @@
 from __future__ import annotations

 import json
-import re
 import shutil
 import urllib.request
 from http.client import HTTPResponse
@@ -121,6 +120,59 @@ def get_local_tags(repo_path: Path, _filter: str | None = None) -> List[str]:
    :param _filter: Optional filter to filter the tags by
    :return: List of tags
    """
+
+    def parse_version(version: str) -> tuple:
+        # Remove 'v' prefix if present
+        if version.startswith("v") and version[1:][0].isdigit():
+            version = version[1:]
+
+        # Split into version parts and pre-release parts
+        if "-" in version:
+            version_part, pre_part = version.split("-", 1)
+            pre_parts = pre_part.replace("-", ".").split(".")
+        else:
+            version_part = version
+            pre_parts = []
+
+        # Split version into components
+        version_parts = version_part.split(".")
+
+        # Convert to integers where possible
+        def try_int(x):
+            try:
+                return int(x)
+            except ValueError:
+                return (
+                    x.lower()
+                )  # Convert strings to lowercase for case-insensitive comparison
+
+        version_ints = [try_int(part) for part in version_parts]
+
+        # Pad version parts to at least 3 components
+        while len(version_ints) < 3:
+            version_ints.append(0)
+
+        # Handle pre-release versions
+        pre_type = 999  # High number for stable releases
+        pre_num = 0
+
+        if pre_parts:
+            pre_type_map = {"alpha": 0, "beta": 1, "rc": 2}
+            pre_type = pre_type_map.get(
+                pre_parts[0].lower(), 3
+            )  # Default to 3 for unknown pre-release types
+
+            if len(pre_parts) > 1 and str(pre_parts[1]).isdigit():
+                pre_num = int(pre_parts[1])
+
+        return (
+            version_ints[0],  # major
+            version_ints[1],  # minor
+            version_ints[2],  # patch
+            pre_type,  # pre-release type (higher number = more stable)
+            pre_num,  # pre-release number
+        )
+
    try:
        cmd: List[str] = ["git", "tag", "-l"]

@@ -135,10 +187,8 @@ def get_local_tags(repo_path: Path, _filter: str | None = None) -> List[str]:

        tags: List[str] = result.split("\n")[:-1]

-        return sorted(
-            tags,
-            key=lambda x: [int(i) if i.isdigit() else i for i in re.split(r"(\d+)", x)],
-        )
+        # Sort using our custom version parser
+        return sorted(tags, key=parse_version)

    except CalledProcessError:
        return []
--- a/pyproject.toml
+++ b/pyproject.toml
@@ -2,7 +2,7 @@
 requires-python = ">=3.8"

 [project.optional-dependencies]
-dev=["ruff", "pyright"]
+dev=["ruff", "mypy"]

 [tool.ruff]
 required-version = ">=0.9.10"
@@ -20,3 +20,14 @@ quote-style = "double"

 [tool.ruff.lint]
 extend-select = ["I"]
+
+[tool.mypy]
+python_version = "3.8"
+platform = "linux"
+# strict = true # TODO: enable this once everything is else is handled
+check_untyped_defs = true
+ignore_missing_imports = true
+warn_redundant_casts = true
+warn_unused_ignores = true
+warn_return_any = true
+warn_unreachable = true
--- a/pyrightconfig.json
+++ b/pyrightconfig.json
@@ -1,6 +0,0 @@
-{
-  "pythonVersion": "3.8",
-  "pythonPlatform": "Linux",
-  "typeCheckingMode": "standard",
-  "venvPath": "./.kiauh-env"
-}
--- a/requirements-dev.txt
+++ b/requirements-dev.txt
@@ -1,2 +1,2 @@
 ruff (>=0.9.10)
-pyright
+mypy
--- a/resources/autocommit.sh
+++ b/resources/autocommit.sh
@@ -1,65 +0,0 @@
-#!/usr/bin/env bash
-
-#####################################################################
-### Please set the paths accordingly. In case you don't have all  ###
-### the listed folders, just keep that line commented out.        ###
-#####################################################################
-### Path to your config folder you want to back up
-#config_folder=~/klipper_config
-
-### Path to your Klipper folder, by default that is '~/klipper'
-#klipper_folder=~/klipper
-
-### Path to your Moonraker folder, by default that is '~/moonraker'
-#moonraker_folder=~/moonraker
-
-### Path to your Mainsail folder, by default that is '~/mainsail'
-#mainsail_folder=~/mainsail
-
-### Path to your Fluidd folder, by default that is '~/fluidd'
-#fluidd_folder=~/fluidd
-
-#####################################################################
-#####################################################################
-
-
-#####################################################################
-################ !!! DO NOT EDIT BELOW THIS LINE !!! ################
-#####################################################################
-grab_version() {
-  local klipper_commit moonraker_commit
-  local mainsail_ver fluidd_ver
-
-  if [[ -n ${klipper_folder} ]]; then
-    cd "${klipper_folder}"
-    klipper_commit=$(git rev-parse --short=7 HEAD)
-    m1="Klipper on commit: ${klipper_commit}"
-  fi
-  if [[ -n ${moonraker_folder} ]]; then
-    cd "${moonraker_folder}"
-    moonraker_commit=$(git rev-parse --short=7 HEAD)
-    m2="Moonraker on commit: ${moonraker_commit}"
-  fi
-  if [[ -n ${mainsail_folder} ]]; then
-    mainsail_ver=$(head -n 1 "${mainsail_folder}/.version")
-    m3="Mainsail version: ${mainsail_ver}"
-  fi
-  if [[ -n ${fluidd_folder} ]]; then
-    fluidd_ver=$(head -n 1 "${fluidd_folder}/.version")
-    m4="Fluidd version: ${fluidd_ver}"
-  fi
-}
-
-push_config() {
-  local current_date
-  
-  cd "${config_folder}" || exit 1
-  git pull
-  git add .
-  current_date=$(date +"%Y-%m-%d %T")
-  git commit -m "Autocommit from ${current_date}" -m "${m1}" -m "${m2}" -m "${m3}" -m "${m4}"
-  git push
-}
-
-grab_version
-push_config
--- a/resources/common_vars.conf
+++ b/resources/common_vars.conf
@@ -1,6 +0,0 @@
-# /etc/nginx/conf.d/common_vars.conf
-
-map $http_upgrade $connection_upgrade {
-    default upgrade;
-    '' close;
-}
--- a/resources/example.printer.cfg
+++ b/resources/example.printer.cfg
@@ -1,11 +0,0 @@
-[mcu]
-serial: /dev/serial/by-id/<your-mcu-id>
-
-[virtual_sdcard]
-path: %GCODES_DIR%
-on_error_gcode: CANCEL_PRINT
-
-[printer]
-kinematics: none
-max_velocity: 1000
-max_accel: 1000
--- a/resources/fluidd
+++ b/resources/fluidd
@@ -1,96 +0,0 @@
-# /etc/nginx/sites-available/fluidd
-
-server {
-    listen 80;
-
-    access_log /var/log/nginx/fluidd-access.log;
-    error_log /var/log/nginx/fluidd-error.log;
-
-    # disable this section on smaller hardware like a pi zero
-    gzip on;
-    gzip_vary on;
-    gzip_proxied any;
-    gzip_proxied expired no-cache no-store private auth;
-    gzip_comp_level 4;
-    gzip_buffers 16 8k;
-    gzip_http_version 1.1;
-    gzip_types text/plain text/css text/xml text/javascript application/javascript application/x-javascript application/json application/xml;
-
-    # web_path from fluidd static files
-    root /home/pi/fluidd;
-
-    index index.html;
-    server_name _;
-
-    # disable max upload size checks
-    client_max_body_size 0;
-
-    # disable proxy request buffering
-    proxy_request_buffering off;
-
-    location / {
-        try_files $uri $uri/ /index.html;
-    }
-
-    location = /index.html {
-        add_header Cache-Control "no-store, no-cache, must-revalidate";
-    }
-
-    location /websocket {
-        proxy_pass http://apiserver/websocket;
-        proxy_http_version 1.1;
-        proxy_set_header Upgrade $http_upgrade;
-        proxy_set_header Connection $connection_upgrade;
-        proxy_set_header Host $http_host;
-        proxy_set_header X-Real-IP $remote_addr;
-        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-        proxy_read_timeout 86400;
-    }
-
-    location ~ ^/(printer|api|access|machine|server)/ {
-        proxy_pass http://apiserver$request_uri;
-        proxy_http_version 1.1;
-        proxy_set_header Upgrade $http_upgrade;
-        proxy_set_header Host $http_host;
-        proxy_set_header X-Real-IP $remote_addr;
-        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-        proxy_set_header X-Scheme $scheme;
-        proxy_read_timeout 600;
-    }
-
-    location /webcam/ {
-        postpone_output 0;
-        proxy_buffering off;
-        proxy_ignore_headers X-Accel-Buffering;
-        access_log off;
-        error_log off;
-        proxy_pass http://mjpgstreamer1/;
-    }
-
-    location /webcam2/ {
-        postpone_output 0;
-        proxy_buffering off;
-        proxy_ignore_headers X-Accel-Buffering;
-        access_log off;
-        error_log off;
-        proxy_pass http://mjpgstreamer2/;
-    }
-
-    location /webcam3/ {
-        postpone_output 0;
-        proxy_buffering off;
-        proxy_ignore_headers X-Accel-Buffering;
-        access_log off;
-        error_log off;
-        proxy_pass http://mjpgstreamer3/;
-    }
-
-    location /webcam4/ {
-        postpone_output 0;
-        proxy_buffering off;
-        proxy_ignore_headers X-Accel-Buffering;
-        access_log off;
-        error_log off;
-        proxy_pass http://mjpgstreamer4/;
-    }
-}
--- a/resources/gcode_shell_command.py
+++ b/resources/gcode_shell_command.py
@@ -1,94 +0,0 @@
-# Run a shell command via gcode
-#
-# Copyright (C) 2019  Eric Callahan <arksine.code@gmail.com>
-#
-# This file may be distributed under the terms of the GNU GPLv3 license.
-import os
-import shlex
-import subprocess
-import logging
-
-
-class ShellCommand:
-    def __init__(self, config):
-        self.name = config.get_name().split()[-1]
-        self.printer = config.get_printer()
-        self.gcode = self.printer.lookup_object("gcode")
-        cmd = config.get("command")
-        cmd = os.path.expanduser(cmd)
-        self.command = shlex.split(cmd)
-        self.timeout = config.getfloat("timeout", 2.0, above=0.0)
-        self.verbose = config.getboolean("verbose", True)
-        self.proc_fd = None
-        self.partial_output = ""
-        self.gcode.register_mux_command(
-            "RUN_SHELL_COMMAND",
-            "CMD",
-            self.name,
-            self.cmd_RUN_SHELL_COMMAND,
-            desc=self.cmd_RUN_SHELL_COMMAND_help,
-        )
-
-    def _process_output(self, eventime):
-        if self.proc_fd is None:
-            return
-        try:
-            data = os.read(self.proc_fd, 4096)
-        except Exception:
-            pass
-        data = self.partial_output + data.decode()
-        if "\n" not in data:
-            self.partial_output = data
-            return
-        elif data[-1] != "\n":
-            split = data.rfind("\n") + 1
-            self.partial_output = data[split:]
-            data = data[:split]
-        else:
-            self.partial_output = ""
-        self.gcode.respond_info(data)
-
-    cmd_RUN_SHELL_COMMAND_help = "Run a linux shell command"
-
-    def cmd_RUN_SHELL_COMMAND(self, params):
-        gcode_params = params.get("PARAMS", "")
-        gcode_params = shlex.split(gcode_params)
-        reactor = self.printer.get_reactor()
-        try:
-            proc = subprocess.Popen(
-                self.command + gcode_params,
-                stdout=subprocess.PIPE,
-                stderr=subprocess.STDOUT,
-            )
-        except Exception:
-            logging.exception("shell_command: Command {%s} failed" % (self.name))
-            raise self.gcode.error("Error running command {%s}" % (self.name))
-        if self.verbose:
-            self.proc_fd = proc.stdout.fileno()
-            self.gcode.respond_info("Running Command {%s}...:" % (self.name))
-            hdl = reactor.register_fd(self.proc_fd, self._process_output)
-        eventtime = reactor.monotonic()
-        endtime = eventtime + self.timeout
-        complete = False
-        while eventtime < endtime:
-            eventtime = reactor.pause(eventtime + 0.05)
-            if proc.poll() is not None:
-                complete = True
-                break
-        if not complete:
-            proc.terminate()
-        if self.verbose:
-            if self.partial_output:
-                self.gcode.respond_info(self.partial_output)
-                self.partial_output = ""
-            if complete:
-                msg = "Command {%s} finished\n" % (self.name)
-            else:
-                msg = "Command {%s} timed out" % (self.name)
-            self.gcode.respond_info(msg)
-            reactor.unregister_fd(hdl)
-            self.proc_fd = None
-
-
-def load_config_prefix(config):
-    return ShellCommand(config)
--- a/resources/klipper.env
+++ b/resources/klipper.env
@@ -1 +0,0 @@
-KLIPPER_ARGS="%KLIPPER_DIR%/klippy/klippy.py %CFG% -I %PRINTER% -l %LOG% -a %UDS%"
--- a/resources/klipper.service
+++ b/resources/klipper.service
@@ -1,18 +0,0 @@
-[Unit]
-Description=Klipper 3D Printer Firmware SV1
-Documentation=https://www.klipper3d.org/
-After=network-online.target
-Wants=udev.target
-
-[Install]
-WantedBy=multi-user.target
-
-[Service]
-Type=simple
-User=%USER%
-RemainAfterExit=yes
-WorkingDirectory=%KLIPPER_DIR%
-EnvironmentFile=%ENV_FILE%
-ExecStart=%ENV%/bin/python $KLIPPER_ARGS
-Restart=always
-RestartSec=10
--- a/resources/mainsail
+++ b/resources/mainsail
@@ -1,96 +0,0 @@
-# /etc/nginx/sites-available/mainsail
-
-server {
-    listen 80;
-
-    access_log /var/log/nginx/mainsail-access.log;
-    error_log /var/log/nginx/mainsail-error.log;
-
-    # disable this section on smaller hardware like a pi zero
-    gzip on;
-    gzip_vary on;
-    gzip_proxied any;
-    gzip_proxied expired no-cache no-store private auth;
-    gzip_comp_level 4;
-    gzip_buffers 16 8k;
-    gzip_http_version 1.1;
-    gzip_types text/plain text/css text/xml text/javascript application/javascript application/x-javascript application/json application/xml;
-
-    # web_path from mainsail static files
-    root /home/pi/mainsail;
-
-    index index.html;
-    server_name _;
-
-    # disable max upload size checks
-    client_max_body_size 0;
-
-    # disable proxy request buffering
-    proxy_request_buffering off;
-
-    location / {
-        try_files $uri $uri/ /index.html;
-    }
-
-    location = /index.html {
-        add_header Cache-Control "no-store, no-cache, must-revalidate";
-    }
-
-    location /websocket {
-        proxy_pass http://apiserver/websocket;
-        proxy_http_version 1.1;
-        proxy_set_header Upgrade $http_upgrade;
-        proxy_set_header Connection $connection_upgrade;
-        proxy_set_header Host $http_host;
-        proxy_set_header X-Real-IP $remote_addr;
-        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-        proxy_read_timeout 86400;
-    }
-
-    location ~ ^/(printer|api|access|machine|server)/ {
-        proxy_pass http://apiserver$request_uri;
-        proxy_http_version 1.1;
-        proxy_set_header Upgrade $http_upgrade;
-        proxy_set_header Host $http_host;
-        proxy_set_header X-Real-IP $remote_addr;
-        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-        proxy_set_header X-Scheme $scheme;
-        proxy_read_timeout 600;
-    }
-
-    location /webcam/ {
-        postpone_output 0;
-        proxy_buffering off;
-        proxy_ignore_headers X-Accel-Buffering;
-        access_log off;
-        error_log off;
-        proxy_pass http://mjpgstreamer1/;
-    }
-
-    location /webcam2/ {
-        postpone_output 0;
-        proxy_buffering off;
-        proxy_ignore_headers X-Accel-Buffering;
-        access_log off;
-        error_log off;
-        proxy_pass http://mjpgstreamer2/;
-    }
-
-    location /webcam3/ {
-        postpone_output 0;
-        proxy_buffering off;
-        proxy_ignore_headers X-Accel-Buffering;
-        access_log off;
-        error_log off;
-        proxy_pass http://mjpgstreamer3/;
-    }
-
-    location /webcam4/ {
-        postpone_output 0;
-        proxy_buffering off;
-        proxy_ignore_headers X-Accel-Buffering;
-        access_log off;
-        error_log off;
-        proxy_pass http://mjpgstreamer4/;
-    }
-}
--- a/resources/mjpg-streamer/webcam.txt
+++ b/resources/mjpg-streamer/webcam.txt
@@ -1,79 +0,0 @@
-### Windows users: To edit this file use Notepad++, VSCode, Atom or SublimeText.
-### Do not use Notepad or WordPad.
-
-### MacOSX users: If you use Textedit to edit this file make sure to use 
-### "plain text format" and "disable smart quotes" in "Textedit > Preferences"
-
-### Configure which camera to use
-#
-# Available options are:
-# - auto: tries first usb webcam, if that's not available tries raspi cam
-# - usb: only tries usb webcam
-# - raspi: only tries raspi cam
-#
-# Defaults to auto
-#
-#camera="auto"
-
-### Additional options to supply to MJPG Streamer for the USB camera
-#
-# See https://faq.octoprint.org/mjpg-streamer-config for available options
-#
-# Defaults to a resolution of 640x480 px and a framerate of 10 fps
-#
-#camera_usb_options="-r 640x480 -f 10"
-
-### Additional webcam devices known to cause problems with -f
-#
-# Apparently there a some devices out there that with the current 
-# mjpg_streamer release do not support the -f parameter (for specifying 
-# the capturing framerate) and will just refuse to output an image if it 
-# is supplied.
-#
-# The webcam daemon will detect those devices by their USB Vendor and Product
-# ID and remove the -f parameter from the options provided to mjpg_streamer.
-#
-# By default, this is done for the following devices:
-#   Logitech C170 (046d:082b)
-#   GEMBIRD (1908:2310)
-#   Genius F100 (0458:708c)
-#   Cubeternet GL-UPC822 UVC WebCam (1e4e:0102)
-#
-# Using the following option it is possible to add additional devices. If
-# your webcam happens to show above symptoms, try determining your cam's
-# vendor and product id via lsusb, activating the line below by removing # and 
-# adding it, e.g. for two broken cameras "aabb:ccdd" and "aabb:eeff"
-#
-#   additional_brokenfps_usb_devices=("aabb:ccdd" "aabb:eeff")
-#
-#
-#additional_brokenfps_usb_devices=()
-
-### Additional options to supply to MJPG Streamer for the RasPi Cam
-#
-# See https://faq.octoprint.org/mjpg-streamer-config for available options
-#
-# Defaults to 10fps
-#
-#camera_raspi_options="-fps 10"
-
-### Configuration of camera HTTP output
-#
-# Usually you should NOT need to change this at all! Only touch if you
-# know what you are doing and what the parameters mean.
-#
-# Below settings are used in the mjpg-streamer call like this:
-#
-#   -o "output_http.so -w $camera_http_webroot $camera_http_options"
-#
-# Current working directory is the mjpg-streamer base directory.
-#
-#camera_http_webroot="./www-mainsail"
-#camera_http_options="-n"
-
-### EXPERIMENTAL
-# Support for different streamer types.
-#
-# Available options:
-#   mjpeg [default] - stable MJPG-streamer
-#camera_streamer=mjpeg
--- a/resources/mjpg-streamer/webcamd
+++ b/resources/mjpg-streamer/webcamd
@@ -1,303 +0,0 @@
-#!/bin/bash
-
-########################################################################
-### DO NOT EDIT THIS FILE TO CHANGE THE CONFIG!!!                    ###
-### ---------------------------------------------------------------- ###
-### There is no need to edit this file for changing resolution,      ###
-### frame rates or any other mjpg-streamer parameters. Please edit   ###
-### /home/pi/klipper_config/webcam.txt instead - that's what it's    ###
-### there for! You can even do this with your Pi powered down by     ###
-### directly accessing the file when using the SD card as thumb      ###
-### drive in your regular computer.                                  ###
-########################################################################
-
-MJPGSTREAMER_HOME=/home/pi/mjpg-streamer
-MJPGSTREAMER_INPUT_USB="input_uvc.so"
-MJPGSTREAMER_INPUT_RASPICAM="input_raspicam.so"
-
-brokenfps_usb_devices=("046d:082b" "1908:2310" "0458:708c" "1e4e:0102" "0471:0311" "038f:6001" "046d:0804" "046d:0825" "046d:0994" "0ac8:3450")
-
-config_dir="/home/pi/klipper_config"
-
-echo "Starting up webcamDaemon..."
-echo ""
-
-cfg_files=()
-#cfg_files+=/boot/mainsail.txt
-if [[ -d ${config_dir} ]]; then
-  cfg_files+=( `ls ${config_dir}/webcam*.txt` )
-fi
-
-array_camera_config=()
-array_camera=()
-array_camera_usb_options=()
-array_camera_usb_device=()
-array_camera_raspi_options=()
-array_camera_http_webroot=()
-array_camera_http_options=()
-array_additional_brokenfps_usb_devices=()
-array_camera_device=()
-array_assigned_device=()
-
-echo "--- Configuration: ----------------------------"
-for cfg_file in ${cfg_files[@]}; do
-  # init configuration - DO NOT EDIT, USE /home/pi/klipper_config/webcam*.txt INSTEAD!
-  camera="auto"
-  camera_usb_options="-r 640x480 -f 10"
-  camera_raspi_options="-fps 10"
-  camera_http_webroot="./www-mjpgstreamer"
-  camera_http_options="-n"
-  additional_brokenfps_usb_devices=()
-
-  if [[ -e ${cfg_file} ]]; then
-      source "$cfg_file"
-  fi
-  usb_options="$camera_usb_options"
-
-  # if webcam device is explicitly given in /home/pi/klipper_config/webcam*.txt, save the path of the device
-  # to a variable and remove its parameter from usb_options
-  extracted_device=`echo $usb_options | sed 's@.*-d \(/dev/\(video[0-9]\+\|v4l/[^ ]*\)\).*@\1@'`
-  if [ "$extracted_device" != "$usb_options" ]
-  then
-    # the camera options refer to a device, save it in a variable
-    # replace video device parameter with empty string and strip extra whitespace
-    usb_options=`echo $usb_options | sed 's/\-d \/dev\/\(video[0-9]\+\|v4l\/[^ ]*\)//g' | awk '$1=$1'`
-  else
-    extracted_device=""
-  fi
-
-  # echo configuration
-  echo "cfg_file:      $cfg_file"
-  echo "camera:        $camera"
-  echo "usb options:   $camera_usb_options"
-  echo "raspi options: $camera_raspi_options"
-  echo "http options:  -w $camera_http_webroot $camera_http_options"
-  echo ""
-  echo "Explicitly USB device: $extracted_device"
-  echo "-----------------------------------------------"
-  echo ""
-
-  array_camera_config+=( $cfg_file )
-  array_camera+=( $camera )
-  array_camera_usb_options+=("$usb_options")
-  array_camera_usb_device+=("$extracted_device")
-  array_camera_raspi_options+=("$camera_raspi_options")
-  array_camera_http_webroot+=("$camera_http_webroot")
-  array_camera_http_options+=("$camera_http_options")
-  array_camera_brokenfps_usb_devices+=("${brokenfps_usb_devices[*]} ${additional_brokenfps_usb_devices[*]}")
-  array_camera_device+=("")
-done
-
-# check if array contains a string
-function containsString() {
-  local e match="$1"
-  shift
-  for e; do [[ "$e" == "$match" ]] && return 0; done
-  return 1
-}
-
-# cleans up when the script receives a SIGINT or SIGTERM
-function cleanup() {
-    # make sure that all child processed die when we die
-    local pids=$(jobs -pr)
-    [ -n "$pids" ] && kill $pids
-    exit 0
-}
-
-# says goodbye when the script shuts down
-function goodbye() {
-    # say goodbye
-    echo ""
-    echo "Goodbye..."
-    echo ""
-}
-
-# runs MJPG Streamer, using the provided input plugin + configuration
-function runMjpgStreamer {
-    input=$1
-
-    # There are problems with 0x000137ab firmware on VL805 (Raspberry Pi 4}).
-    # Try to autodetect offending firmware and temporarily fix the issue
-    # by changing power management mode
-    echo "Checking for VL805 (Raspberry Pi 4)..."
-    if [[ -f /usr/bin/vl805 ]]; then
-        VL805_VERSION=$(/usr/bin/vl805)
-        VL805_VERSION=${VL805_VERSION#*: }
-        echo " - version 0x${VL805_VERSION} detected"
-        case "$VL805_VERSION" in
-            00013701)
-                echo "    - nothing to be done. It shouldn't cause USB problems."
-                ;;
-            000137ab)
-                echo -e "    - \e[31mThis version is known to cause problems with USB cameras.\e[39m"
-                echo -e "      You may want to downgrade to 0x0013701."
-                echo -e "    - [FIXING] Trying the setpci -s 01:00.0 0xD4.B=0x41 hack to mitigate the"
-                echo -e "      issue. It disables ASPM L1 on the VL805. Your board may (or may not) get"
-                echo -e "      slightly hotter. For details see:"
-                echo -e "      https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=244421"
-                setpci -s 01:00.0 0xD4.B=0x41
-                ;;
-            *)
-                echo "   - unknown firmware version. Doing nothing."
-                ;;
-        esac
-    else
-        echo "  - It seems that you don't have VL805 (Raspberry Pi 4)."
-        echo "    There should be no problems with USB (a.k.a. select() timeout)"
-    fi
-
-    pushd $MJPGSTREAMER_HOME > /dev/null 2>&1
-        echo Running ./mjpg_streamer -o "output_http.so -w $camera_http_webroot $camera_http_options" -i "$input"
-        LD_LIBRARY_PATH=. ./mjpg_streamer -o "output_http.so -w $camera_http_webroot $camera_http_options" -i "$input" &
-        sleep 1 &
-        sleep_pid=$!
-        wait ${sleep_pid}
-    popd > /dev/null 2>&1
-}
-
-# starts up the RasPiCam
-function startRaspi {
-    logger -s "Starting Raspberry Pi camera"
-    runMjpgStreamer "$MJPGSTREAMER_INPUT_RASPICAM $camera_raspi_options"
-}
-
-# starts up the USB webcam
-function startUsb {
-    options="$usb_options"
-    device="video0"
-
-    # check for parameter and set the device if it is given as a parameter
-    input=$1
-    if [[ -n $input ]]; then
-        device=`basename "$input"`
-    fi
-
-    # add video device into options
-    options="$options -d /dev/$device"
-
-    uevent_file="/sys/class/video4linux/$device/device/uevent"
-    if [ -e $uevent_file ]; then
-        # let's see what kind of webcam we have here, fetch vid and pid...
-        product=`cat $uevent_file | grep PRODUCT | cut -d"=" -f2`
-        vid=`echo $product | cut -d"/" -f1`
-        pid=`echo $product | cut -d"/" -f2`
-        vidpid=`printf "%04x:%04x" "0x$vid" "0x$pid"`
-
-        # ... then look if it is in our list of known broken-fps-devices and if so remove
-        # the -f parameter from the options (if it's in there, else that's just a no-op)
-        for identifier in ${brokenfps_usb_devices[@]};
-        do
-            if [ "$vidpid" = "$identifier" ]; then
-                echo
-                echo "Camera model $vidpid is known to not work with -f parameter, stripping it out"
-                echo
-                options=`echo $options | sed -e "s/\(\s\+\|^\)-f\s\+[0-9]\+//g"`
-            fi
-        done
-    fi
-
-    logger -s "Starting USB webcam"
-    runMjpgStreamer "$MJPGSTREAMER_INPUT_USB $options"
-}
-
-# make sure our cleanup function gets called when we receive SIGINT, SIGTERM
-trap "cleanup" SIGINT SIGTERM
-# say goodbye when we EXIT
-trap "goodbye" EXIT
-
-# we need this to prevent the later calls to vcgencmd from blocking
-# I have no idea why, but that's how it is...
-vcgencmd version > /dev/null 2>&1
-
-# keep mjpg streamer running if some camera is attached
-while true; do
-
-  # get list of usb video devices into an array
-  video_devices=($(find /dev -regextype sed -regex '\/dev/video[0-9]\+' | sort -nk1.11 2> /dev/null))
-
-  # add list of raspi camera into an array
-  if [ "`vcgencmd get_camera`" = "supported=1 detected=1" ]; then
-    video_devices+=( "raspi" )
-  fi
-
-  echo "Found video devices:"
-  printf '%s\n' "${video_devices[@]}"
-
-  for scan_mode in "usb" "usb-auto" "raspi" "auto"; do
-    camera=$scan_mode
-    if [[ "usb-auto" == "$scan_mode" ]]; then
-      camera="usb"
-    fi
-    for ((i=0;i<${#array_camera[@]};i++));  do
-      if [[ -z ${array_camera_device[${i}]} ]] && [[ $camera == ${array_camera[${i}]} ]]; then
-        camera_config="${array_camera_config[${i}]}"
-        usb_options="${array_camera_usb_options[${i}]}"
-        camera_usb_device="${array_camera_usb_device[${i}]}"
-        camera_raspi_options="${array_camera_raspi_options[${i}]}"
-        camera_http_webroot="${array_camera_http_webroot[${i}]}"
-        camera_http_options="${array_camera_http_options[${i}]}"
-        brokenfps_usb_devices="${array_camera_brokenfps_usb_devices[${i}]}"
-        if [[ ${camera_usb_device} ]] && { [[ "usb" == ${scan_mode} ]] || [[ "auto" == ${scan_mode} ]]; }; then
-           # usb device is explicitly set in options
-          usb_device_path=`readlink -f ${camera_usb_device}`
-          if containsString "$usb_device_path" "${array_camera_device[@]}"; then
-            if [[ "auto" != ${scan_mode} ]]; then
-              array_camera_device[${i}]="alredy_in_use"
-              echo "config file='$camera_config':Video device already in use."
-              continue
-            fi
-          elif containsString "$usb_device_path" "${video_devices[@]}"; then
-            array_camera_device[${i}]="$usb_device_path"
-            # explicitly set usb device was found in video_devices array, start usb with the found device
-            echo "config file='$camera_config':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: $usb_device_path"
-            startUsb "$usb_device_path"
-            continue
-          fi
-        elif [[ -z ${camera_usb_device} ]] && { [[ "usb-auto" == ${scan_mode} ]] || [[ "auto" == ${scan_mode} ]]; }; then
-          for video_device in "${video_devices[@]}"; do
-            if [[ "raspi" != "$video_device" ]]; then
-              if containsString "$video_device" "${array_camera_device[@]}"; then
-                : #already in use
-              else
-                array_camera_device[${i}]="$video_device"
-                # device is not set explicitly in options, start usb with first found usb camera as the device
-                echo "config file='$camera_config':USB device was not set in options, start MJPG-streamer with the first found video device: ${video_device}"
-                startUsb "${video_device}"
-                break
-              fi
-            fi
-          done
-          if [[ -n ${array_camera_device[${i}]} ]]; then
-            continue
-          fi
-        fi
-        if [[ "raspi" == ${scan_mode} ]] || [[ "auto" == ${scan_mode} ]]; then
-          video_device="raspi"
-          if containsString "$video_device" "${array_camera_device[@]}"; then
-            if [[ "auto" != ${scan_mode} ]]; then
-              array_camera_device[${i}]="alredy_in_use"
-              echo "config file='$camera_config':RasPiCam device already in use."
-            fi
-          elif containsString "$video_device" "${video_devices[@]}"; then
-            array_camera_device[${i}]="$video_device"
-            echo "config file='$camera_config':Start MJPG-streamer with video device: ${video_device}"
-            startRaspi
-            sleep 30 &
-            sleep_pid=$!
-            wait ${sleep_pid}
-          fi
-        fi
-      fi
-    done
-  done
-  array_assigned_device=( ${array_camera_device[*]} )
-  if [[ ${#array_camera[@]} -eq ${#array_assigned_device[@]} ]]; then
-    echo "Done bring up all configured video device"
-    exit 0
-  else
-    echo "Scan again in two minutes"
-    sleep 120 &
-    sleep_pid=$!
-    wait ${sleep_pid}
-  fi
-done
--- a/resources/mjpg-streamer/webcamd.service
+++ b/resources/mjpg-streamer/webcamd.service
@@ -1,15 +0,0 @@
-[Unit]
-Description=Starts mjpg-streamer on startup
-After=network.target
-
-[Install]
-WantedBy=multi-user.target
-
-[Service]
-Type=forking
-User=%USER%
-WorkingDirectory=/usr/local/bin
-StandardOutput=append:/var/log/webcamd.log
-StandardError=append:/var/log/webcamd.log
-ExecStart=/usr/local/bin/webcamd
-Restart=always
--- a/resources/moonraker-telegram-bot.env
+++ b/resources/moonraker-telegram-bot.env
@@ -1 +0,0 @@
-TELEGRAM_BOT_ARGS="%TELEGRAM_BOT_DIR%/bot/main.py -c %CFG% -l %LOG%"
--- a/resources/moonraker-telegram-bot.service
+++ b/resources/moonraker-telegram-bot.service
@@ -1,16 +0,0 @@
-[Unit]
-Description=Moonraker Telegram Bot SV1 %INST%
-Documentation=https://github.com/nlef/moonraker-telegram-bot/wiki
-After=network-online.target
-
-[Install]
-WantedBy=multi-user.target
-
-[Service]
-Type=simple
-User=%USER%
-WorkingDirectory=%TELEGRAM_BOT_DIR%
-EnvironmentFile=%ENV_FILE%
-ExecStart=%ENV%/bin/python $TELEGRAM_BOT_ARGS
-Restart=always
-RestartSec=10
--- a/resources/moonraker.conf
+++ b/resources/moonraker.conf
@@ -1,31 +0,0 @@
-[server]
-host: 0.0.0.0
-port: %PORT%
-klippy_uds_address: %UDS%
-
-[authorization]
-trusted_clients:
-    %LAN%
-    10.0.0.0/8
-    127.0.0.0/8
-    169.254.0.0/16
-    172.16.0.0/12
-    192.168.0.0/16
-    FE80::/10
-    ::1/128
-cors_domains:
-    *.lan
-    *.local
-    *.internal
-    *://localhost
-    *://localhost:*
-    *://my.mainsail.xyz
-    *://app.fluidd.xyz
-
-[octoprint_compat]
-
-[history]
-
-[update_manager]
-channel: dev
-refresh_interval: 168
--- a/resources/moonraker.env
+++ b/resources/moonraker.env
@@ -1 +0,0 @@
-MOONRAKER_ARGS="%MOONRAKER_DIR%/moonraker/moonraker.py -d %PRINTER_DATA%"
--- a/resources/moonraker.service
+++ b/resources/moonraker.service
@@ -1,19 +0,0 @@
-[Unit]
-Description=API Server for Klipper SV1 %INST%
-Documentation=https://moonraker.readthedocs.io/
-Requires=network-online.target
-After=network-online.target
-
-[Install]
-WantedBy=multi-user.target
-
-[Service]
-Type=simple
-User=%USER%
-SupplementaryGroups=moonraker-admin
-RemainAfterExit=yes
-WorkingDirectory=%MOONRAKER_DIR%
-EnvironmentFile=%ENV_FILE%
-ExecStart=%ENV%/bin/python $MOONRAKER_ARGS
-Restart=always
-RestartSec=10
--- a/resources/shell_command.cfg
+++ b/resources/shell_command.cfg
@@ -1,7 +0,0 @@
-[gcode_shell_command hello_world]
-command: echo hello world
-timeout: 2.
-verbose: True
-[gcode_macro HELLO_WORLD]
-gcode:
-    RUN_SHELL_COMMAND CMD=hello_world
--- a/resources/upstreams.conf
+++ b/resources/upstreams.conf
@@ -1,25 +0,0 @@
-# /etc/nginx/conf.d/upstreams.conf
-upstream apiserver {
-    ip_hash;
-    server 127.0.0.1:7125;
-}
-
-upstream mjpgstreamer1 {
-    ip_hash;
-    server 127.0.0.1:8080;
-}
-
-upstream mjpgstreamer2 {
-    ip_hash;
-    server 127.0.0.1:8081;
-}
-
-upstream mjpgstreamer3 {
-    ip_hash;
-    server 127.0.0.1:8082;
-}
-
-upstream mjpgstreamer4 {
-    ip_hash;
-    server 127.0.0.1:8083;
-}
--- a/scripts/backup.sh
+++ b/scripts/backup.sh
@@ -1,231 +0,0 @@
-#!/usr/bin/env bash
-
-#=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
-#                                                                       #
-# This file is part of KIAUH - Klipper Installation And Update Helper   #
-# https://github.com/dw-0/kiauh                                         #
-#                                                                       #
-# This file may be distributed under the terms of the GNU GPLv3 license #
-#=======================================================================#
-
-set -e
-
-function get_date() {
-  local current_date
-  current_date=$(date +"%y%m%d-%H%M")
-  echo "${current_date}"
-}
-
-function check_for_backup_dir() {
-  [[ -d ${BACKUP_DIR} ]] && return
-
-  status_msg "Create KIAUH backup directory ..."
-  mkdir -p "${BACKUP_DIR}" && ok_msg "Directory created!"
-}
-
-function backup_before_update() {
-  read_kiauh_ini "${FUNCNAME[0]}"
-  local state="${backup_before_update}"
-  [[ ${state} = "false" ]] && return
-  backup_"${1}"
-}
-
-function backup_config_dir() {
-  check_for_backup_dir
-  local current_date config_pathes
-
-  config_pathes=$(get_config_folders)
-
-  if [[ -n "${config_pathes}" ]]; then
-    current_date=$(get_date)
-    status_msg "Timestamp: ${current_date}"
-
-    local i=0 folder folder_name target_dir
-    for folder in ${config_pathes}; do
-      if [[ -d ${folder} ]]; then
-        status_msg "Create backup of ${folder} ..."
-
-        folder_name=$(echo "${folder}" | rev | cut -d"/" -f2 | rev)
-        target_dir="${BACKUP_DIR}/configs/${current_date}/${folder_name}"
-        mkdir -p "${target_dir}"
-        cp -r "${folder}" "${target_dir}"
-        i=$(( i + 1 ))
-
-        ok_msg "Backup created in:\n${target_dir}"
-      fi
-    done
-  else
-    ok_msg "No config directory found! Skipping backup ..."
-  fi
-}
-
-function backup_moonraker_database() {
-  check_for_backup_dir
-  local current_date db_pathes
-
-  db_pathes=$(get_instance_folder_path "database")
-
-  if [[ -n ${db_pathes} ]]; then
-    current_date=$(get_date)
-    status_msg "Timestamp: ${current_date}"
-
-    local i=0 database folder_name target_dir
-    for database in ${db_pathes}; do
-      status_msg "Create backup of ${database} ..."
-
-      folder_name=$(echo "${database}" | rev | cut -d"/" -f2 | rev)
-      target_dir="${BACKUP_DIR}/moonraker_databases/${current_date}/${folder_name}"
-      mkdir -p "${target_dir}"
-      cp -r "${database}" "${target_dir}"
-      i=$(( i + 1 ))
-
-      ok_msg "Backup created in:\n${target_dir}"
-    done
-  else
-    print_error "No Moonraker database found! Skipping backup ..."
-  fi
-}
-
-function backup_klipper() {
-  local current_date
-
-  if [[ -d ${KLIPPER_DIR} && -d ${KLIPPY_ENV} ]]; then
-    status_msg "Creating Klipper backup ..."
-    check_for_backup_dir
-    current_date=$(get_date)
-    status_msg "Timestamp: ${current_date}"
-    mkdir -p "${BACKUP_DIR}/klipper-backups/${current_date}"
-    cp -r "${KLIPPER_DIR}" "${_}" && cp -r "${KLIPPY_ENV}" "${_}"
-    print_confirm "Klipper backup complete!"
-  else
-    print_error "Can't back up 'klipper' and/or 'klipper-env' directory! Not found!"
-  fi
-}
-
-function backup_mainsail() {
-  local current_date
-
-  if [[ -d ${MAINSAIL_DIR} ]]; then
-    status_msg "Creating Mainsail backup ..."
-    check_for_backup_dir
-    current_date=$(get_date)
-    status_msg "Timestamp: ${current_date}"
-    mkdir -p "${BACKUP_DIR}/mainsail-backups/${current_date}"
-    cp -r "${MAINSAIL_DIR}" "${_}"
-    print_confirm "Mainsail backup complete!"
-  else
-    print_error "Can't back up 'mainsail' directory! Not found!"
-  fi
-}
-
-function backup_fluidd() {
-  local current_date
-
-  if [[ -d ${FLUIDD_DIR} ]]; then
-    status_msg "Creating Fluidd backup ..."
-    check_for_backup_dir
-    current_date=$(get_date)
-    status_msg "Timestamp: ${current_date}"
-    mkdir -p "${BACKUP_DIR}/fluidd-backups/${current_date}"
-    cp -r "${FLUIDD_DIR}" "${_}"
-    print_confirm "Fluidd backup complete!"
-  else
-    print_error "Can't back up 'fluidd' directory! Not found!"
-  fi
-}
-
-function backup_moonraker() {
-  local current_date
-
-  if [[ -d ${MOONRAKER_DIR} && -d ${MOONRAKER_ENV} ]]; then
-    status_msg "Creating Moonraker backup ..."
-    check_for_backup_dir
-    current_date=$(get_date)
-    status_msg "Timestamp: ${current_date}"
-    mkdir -p "${BACKUP_DIR}/moonraker-backups/${current_date}"
-    cp -r "${MOONRAKER_DIR}" "${_}" && cp -r "${MOONRAKER_ENV}" "${_}"
-    print_confirm "Moonraker backup complete!"
-  else
-    print_error "Can't back up moonraker and/or moonraker-env directory! Not found!"
-  fi
-}
-
-function backup_octoprint() {
-  local current_date
-
-  if [[ -d ${OCTOPRINT_DIR} && -d ${OCTOPRINT_CFG_DIR} ]]; then
-    status_msg "Creating OctoPrint backup ..."
-    check_for_backup_dir
-    current_date=$(get_date)
-    status_msg "Timestamp: ${current_date}"
-    mkdir -p "${BACKUP_DIR}/octoprint-backups/${current_date}"
-    cp -r "${OCTOPRINT_DIR}" "${_}" && cp -r "${OCTOPRINT_CFG_DIR}" "${_}"
-    print_confirm " OctoPrint backup complete!"
-  else
-    print_error "Can't back up OctoPrint and/or .octoprint directory!\n Not found!"
-  fi
-}
-
-function backup_klipperscreen() {
-  local current_date
-  if [[ -d ${KLIPPERSCREEN_DIR} ]] ; then
-    status_msg "Creating KlipperScreen backup ..."
-    check_for_backup_dir
-    current_date=$(get_date)
-    status_msg "Timestamp: ${current_date}"
-    mkdir -p "${BACKUP_DIR}/klipperscreen-backups/${current_date}"
-    cp -r "${KLIPPERSCREEN_DIR}" "${_}"
-    print_confirm "KlipperScreen backup complete!"
-  else
-    print_error "Can't back up KlipperScreen directory!\n Not found!"
-  fi
-}
-
-function backup_telegram_bot() {
-  local current_date
-
-  if [[ -d ${TELEGRAM_BOT_DIR} ]] ; then
-    status_msg "Creating MoonrakerTelegramBot backup ..."
-    check_for_backup_dir
-    current_date=$(get_date)
-    status_msg "Timestamp: ${current_date}"
-    mkdir -p "${BACKUP_DIR}/MoonrakerTelegramBot-backups/${current_date}"
-    cp -r "${TELEGRAM_BOT_DIR}" "${_}"
-    print_confirm "MoonrakerTelegramBot backup complete!"
-  else
-    print_error "Can't back up MoonrakerTelegramBot directory!\n Not found!"
-  fi
-}
-
-function backup_octoeverywhere() {
-  local current_date
-
-  if [[ -d ${OCTOEVERYWHERE_DIR} ]] ; then
-    status_msg "Creating OctoEverywhere backup ..."
-    check_for_backup_dir
-    current_date=$(get_date)
-    status_msg "Timestamp: ${current_date}"
-    mkdir -p "${BACKUP_DIR}/OctoEverywhere-backups/${current_date}"
-    cp -r "${OCTOEVERYWHERE_DIR}" "${_}" && cp -r "${OCTOEVERYWHERE_ENV}" "${_}"
-    print_confirm "OctoEverywhere backup complete!"
-  else
-    print_error "Can't back up OctoEverywhere directory!\n Not found!"
-  fi
-}
-
-function backup_spoolman() {
-  local current_date
-
-  if [[ -d ${SPOOLMAN_DIR} ]] ; then
-    status_msg "Creating Spoolman backup ..."
-    check_for_backup_dir
-    current_date=$(get_date)
-    status_msg "Timestamp: ${current_date}"
-    mkdir -p "${BACKUP_DIR}/Spoolman-backups/${current_date}"
-    cp -r "${SPOOLMAN_DIR}" "${_}" && cp -r "${SPOOLMAN_DB_DIR}/spoolman.db" "${_}"
-    print_confirm "Spoolman backup complete!"
-  else
-    print_error "Can't back up Spoolman directory!\n Not found!"
-  fi
-}
--- a/scripts/crowsnest.sh
+++ b/scripts/crowsnest.sh
@@ -1,235 +0,0 @@
-#!/usr/bin/env bash
-
-#=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
-#                                                                       #
-# This file is part of KIAUH - Klipper Installation And Update Helper   #
-# https://github.com/dw-0/kiauh                                         #
-#                                                                       #
-# This file may be distributed under the terms of the GNU GPLv3 license #
-#=======================================================================#
-
-#=======================================================================#
-# Crowsnest Installer brought to you by KwadFan <me@stephanwe.de>       #
-# Copyright (C) 2022 KwadFan <me@stephanwe.de>                          #
-# https://github.com/KwadFan/crowsnest                                  #
-#=======================================================================#
-
-# Error Handling
-set -e
-
-# Helper messages
-
-function multi_instance_message(){
-  echo -e "Crowsnest is NOT designed to support multi instances."
-  echo -e "A workaround for this is to choose the most used instance as a 'master'"
-  echo -e "Use this instance to set up your 'crowsnest.conf' and steering it's service.\n"
-  echo -e "Found the following instances:\n"
-  for i in ${1}; do
-    select_msg "${i}"
-  done
-  echo -e "\nLaunching crowsnest's configuration tool ..."
-  continue_config
-}
-
-# Helper funcs
-function clone_crowsnest(){
-  $(command -v git) clone "${CROWSNEST_REPO}" -b master "${CROWSNEST_DIR}"
-}
-
-function check_multi_instance(){
-  local -a instances
-  readarray -t instances < <(find "${HOME}" -regex "${HOME}/[a-zA-Z0-9_]+_data/*" -printf "%P\n" 2> /dev/null | sort)
-  if [[ "${#instances[@]}" -gt 1 ]]; then
-    status_msg "Multi instance install detected ..."
-    multi_instance_message "${instances[*]}"
-    if [[ -d "${HOME}/crowsnest" ]]; then
-      pushd "${HOME}/crowsnest" &> /dev/null || exit 1
-      if ! make config ;then
-        error_msg "Something went wrong! Please try again..."
-        if [[ -f "tools/.config" ]]; then
-          rm -f tools/.config
-        fi
-        exit 1
-      fi
-      if [[ ! -f "tools/.config" ]]; then
-        log_error "failure while generating .config"
-        error_msg "Generating .config failed, installation aborted"
-        exit 1
-      fi
-      popd &> /dev/null || exit 1
-    fi
-  fi
-}
-
-function continue_config() {
-  local reply
-  while true; do
-    read -erp "${cyan}###### Continue with configuration? (y/N):${white} " reply
-    case "${reply}" in
-      Y|y|Yes|yes)
-        select_msg "Yes"
-        break;;
-      N|n|No|no|"")
-        select_msg "No"
-        warn_msg "Installation aborted by user ... Exiting!"
-        exit 1;;
-      *)
-        error_msg "Invalid Input!\n";;
-    esac
-  done
-  return 0
-}
-
-# Install func
-function install_crowsnest(){
-
-  # Step 1: jump to home directory
-  pushd "${HOME}" &> /dev/null || exit 1
-
-  # Step 2: Clone crowsnest repo
-  status_msg "Cloning 'crowsnest' repository ..."
-  if [[ ! -d "${HOME}/crowsnest" && -z "$(ls -A "${HOME}/crowsnest" 2> /dev/null)" ]]; then
-    clone_crowsnest
-  else
-    ok_msg "crowsnest repository already exists ..."
-  fi
-
-  # Step 3: Install dependencies
-  dependency_check git make
-
-  # Step 4: Check for Multi Instance
-  check_multi_instance
-
-  # Step 5: Launch crowsnest installer
-  pushd "${HOME}/crowsnest" &> /dev/null || exit 1
-  title_msg "Installer will prompt you for sudo password!"
-  status_msg "Launching crowsnest installer ..."
-  if ! sudo make install; then
-    error_msg "Something went wrong! Please try again..."
-    exit 1
-  fi
-
-  # Step 5: Leave directory (twice due two pushd)
-  popd &> /dev/null || exit 1
-  popd &> /dev/null || exit 1
-}
-
-# Remove func
-function remove_crowsnest(){
-  if [[ -d "${CROWSNEST_DIR}" ]]; then
-    pushd "${HOME}/crowsnest" &> /dev/null || exit 1
-    title_msg "Uninstaller will prompt you for sudo password!"
-    status_msg "Launching crowsnest uninstaller ..."
-
-    if ! make uninstall; then
-      error_msg "Something went wrong! Please try again..."
-      exit 1
-    fi
-
-    status_msg "Removing crowsnest directory ..."
-    rm -rf "${CROWSNEST_DIR}"
-    ok_msg "Directory removed!"
-  fi
-
-  print_confirm "Crowsnest successfully removed!"
-}
-
-# Status funcs
-get_crowsnest_status(){
-  local -a files
-  local env_file
-  env_file="$(grep "EnvironmentFile" /etc/systemd/system/crowsnest.service 2>/dev/null | cut -d "=" -f2)"
-  files=(
-    "${CROWSNEST_DIR}"
-    "/usr/local/bin/crowsnest"
-    "/etc/logrotate.d/crowsnest"
-    "/etc/systemd/system/crowsnest.service"
-    "${env_file}"
-    )
-  local count
-  count=0
-
-  for file in "${files[@]}"; do
-    [[ -e "${file}" ]] && count=$(( count +1 ))
-  done
-  if [[ "${count}" -eq "${#files[*]}" ]]; then
-    echo "Installed"
-  elif [[ "${count}" -gt 0 ]]; then
-    echo "Incomplete!"
-  else
-    echo "Not installed!"
-  fi
-}
-
-# Update funcs
-# Shameless stolen from KlipperScreen.sh
-function get_local_crowsnest_commit() {
-  [[ ! -d ${CROWSNEST_DIR} || ! -d "${CROWSNEST_DIR}/.git" ]] && return
-
-  local commit
-  cd "${CROWSNEST_DIR}"
-  commit="$(git describe HEAD --always --tags | cut -d "-" -f 1,2)"
-  echo "${commit}"
-}
-
-function get_remote_crowsnest_commit() {
-  [[ ! -d ${CROWSNEST_DIR} || ! -d "${CROWSNEST_DIR}/.git" ]] && return
-
-  local commit
-  cd "${CROWSNEST_DIR}" && git fetch origin -q
-  commit=$(git describe origin/master --always --tags | cut -d "-" -f 1,2)
-  echo "${commit}"
-}
-
-function compare_crowsnest_versions() {
-  local versions local_ver remote_ver
-  local_ver="$(get_local_crowsnest_commit)"
-  remote_ver="$(get_remote_crowsnest_commit)"
-
-  if [[ ${local_ver} != "${remote_ver}" ]]; then
-    versions="${yellow}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-    # add moonraker to application_updates_available in kiauh.ini
-    add_to_application_updates "crowsnest"
-  else
-    versions="${green}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-  fi
-
-  echo "${versions}"
-}
-
-function install_crowsnest_dependencies() {
-  local packages log_name="Crowsnest"
-  local install_script="${CROWSNEST_DIR}/tools/install.sh"
-
-  ### read PKGLIST from official install-script
-  status_msg "Reading dependencies..."
-  # shellcheck disable=SC2016
-  packages="$(grep "PKGLIST=" "${install_script}" | cut -d'"' -f2 | sed 's/\${PKGLIST}//g' | tr -d '\n')"
-
-  echo "${cyan}${packages}${white}" | tr '[:space:]' '\n'
-    read -r -a packages <<< "${packages}"
-
-  ### Update system package lists if stale
-  update_system_package_lists
-
-  ### Install required packages
-  install_system_packages "${log_name}" "packages[@]"
-}
-
-function update_crowsnest() {
-  do_action_service "stop" "crowsnest"
-
-  if [[ ! -d ${CROWSNEST_DIR} ]]; then
-    clone_crowsnest
-  else
-    status_msg "Updating Crowsnest ..."
-    cd "${CROWSNEST_DIR}" && git pull
-    ### read PKGLIST and install possible new dependencies
-    install_crowsnest_dependencies
-  fi
-  ok_msg "Update complete!"
-  do_action_service "restart" "crowsnest"
-}
--- a/scripts/flash_klipper.sh
+++ b/scripts/flash_klipper.sh
@@ -1,494 +0,0 @@
-#!/usr/bin/env bash
-
-#=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
-#                                                                       #
-# This file is part of KIAUH - Klipper Installation And Update Helper   #
-# https://github.com/dw-0/kiauh                                         #
-#                                                                       #
-# This file may be distributed under the terms of the GNU GPLv3 license #
-#=======================================================================#
-
-set -e
-
-function init_flash_process() {
-  ### step 1: check for required userhgroups (tty & dialout)
-  check_usergroups
-
-  top_border
-  echo -e "|        ~~~~~~~~~~~~ [ Flash MCU ] ~~~~~~~~~~~~        |"
-  hr
-  echo -e "| Please select the flashing method to flash your MCU.  |"
-  echo -e "| Make sure to only select a method your MCU supports.  |"
-  echo -e "| Not all MCUs support both methods!                    |"
-  hr
-  blank_line
-  echo -e "| 1) Regular flashing method                            |"
-  echo -e "| 2) Updating via SD-Card Update                        |"
-  blank_line
-  back_help_footer
-
-  local choice method
-  while true; do
-    read -p "${cyan}###### Please select:${white} " choice
-    case "${choice}" in
-      1)
-        select_msg "Regular flashing method"
-        method="regular"
-        break;;
-      2)
-        select_msg "SD-Card Update"
-        method="sdcard"
-        break;;
-      B|b)
-        advanced_menu
-        break;;
-      H|h)
-        clear && print_header
-        show_flash_method_help
-        break;;
-      *)
-        error_msg "Invalid command!";;
-    esac
-  done
-
-  ### step 2: select how the mcu is flashed (flash/serialflash)
-  select_flash_command
-
-  ### step 3: select how the mcu is connected to the host
-  select_mcu_connection
-
-  ### step 4: select which detected mcu should be flashed
-  select_mcu_id "${method}"
-}
-
-#================================================#
-#=================== STEP 2 =====================#
-#================================================#
-function select_flash_command() {
-  unset flash_command
-
-  top_border
-  echo -e "| How to flash MCU?                                     |"
-  echo -e "| 1) make flash (default)                               |"
-  echo -e "| 2) make serialflash (stm32flash)                      |"
-  blank_line
-  back_help_footer
-
-  local choice
-  while true; do
-    read -p "${cyan}###### Flashing command:${white} " -i "1" -e choice
-    case "${choice}" in
-      1)
-        select_msg "Selected 'make flash' command"
-        flash_command="flash"
-        break;;
-      2)
-        select_msg "Selected 'make serialflash' command"
-        flash_command="serialflash"
-        break;;
-      B|b)
-        advanced_menu
-        break;;
-      H|h)
-        clear && print_header
-        show_mcu_flash_command_help
-        break;;
-      *)
-        error_msg "Invalid command!";;
-    esac
-  done
-}
-
-#================================================#
-#=================== STEP 3 =====================#
-#================================================#
-function select_mcu_connection() {
-  top_border
-  echo -e "| ${yellow}Make sure that the controller board is connected now!${white} |"
-  hr
-  blank_line
-  echo -e "| How is the controller board connected to the host?    |"
-  echo -e "| 1) USB                                                |"
-  echo -e "| 2) UART                                               |"
-  echo -e "| 3) USB (DFU mode)                                     |"
-  blank_line
-  back_help_footer
-
-  local choice
-  while true; do
-    read -p "${cyan}###### Connection method:${white} " choice
-    case "${choice}" in
-      1)
-        status_msg "Identifying MCU connected via USB ...\n"
-        get_usb_id || true # continue even after exit code 1
-        break;;
-      2)
-        status_msg "Identifying MCU possibly connected via UART ...\n"
-        get_uart_id || true # continue even after exit code 1
-        break;;
-      3)
-        status_msg "Identifying MCU connected via USB in DFU mode ...\n"
-        get_dfu_id || true # continue even after exit code 1
-        break;;
-      B|b)
-        advanced_menu
-        break;;
-      H|h)
-        clear && print_header
-        show_mcu_connection_help
-        break;;
-      *)
-        error_msg "Invalid command!";;
-    esac
-  done
-}
-
-function print_detected_mcu_to_screen() {
-  local i=1
-
-  if (( ${#mcu_list[@]} < 1 )); then
-    print_error "No MCU found!\n MCU either not connected or not detected!"
-    return
-  fi
-
-  for mcu in "${mcu_list[@]}"; do
-    echo -e " ● MCU #${i}: ${cyan}${mcu}${white}"
-    i=$(( i + 1 ))
-  done
-  echo
-}
-
-#================================================#
-#=================== STEP 4 =====================#
-#================================================#
-function select_mcu_id() {
-  local i=0 sel_index=0 method=${1}
-
-  if (( ${#mcu_list[@]} < 1 )); then
-    print_error "No MCU found!\n MCU either not connected or not detected!"
-    return
-  fi
-
-  top_border
-  echo -e "|                   ${red}!!! ATTENTION !!!${white}                   |"
-  hr
-  echo -e "| Make sure, to select the correct MCU!                 |"
-  echo -e "| ${red}ONLY flash a firmware created for the respective MCU!${white} |"
-  bottom_border
-  echo -e "${cyan}###### List of available MCU:${white}"
-
-  ### list all mcus
-  for mcu in "${mcu_list[@]}"; do
-    i=$(( i + 1 ))
-    mcu=$(echo "${mcu}" | rev | cut -d"/" -f1 | rev)
-    echo -e " ● MCU #${i}: ${cyan}${mcu}${white}"
-  done
-
-  ### verify user input
-  local regex="^[1-9]+$"
-  while [[ ! ${sel_index} =~ ${regex} ]] || [[ ${sel_index} -gt ${i} ]]; do
-    echo
-    read -p "${cyan}###### Select MCU to flash:${white} " sel_index
-
-    if [[ ! ${sel_index} =~ ${regex} ]]; then
-      error_msg "Invalid input!"
-    elif [[ ${sel_index} -lt 1 ]] || [[ ${sel_index} -gt ${i} ]]; then
-      error_msg "Please select a number between 1 and ${i}!"
-    fi
-
-    local mcu_index=$(( sel_index - 1 ))
-    local selected_mcu_id="${mcu_list[${mcu_index}]}"
-  done
-
-  ### confirm selection
-  local yn
-  while true; do
-    echo -e "\n###### You selected:\n ● MCU #${sel_index}: ${selected_mcu_id}\n"
-    read -p "${cyan}###### Continue? (Y/n):${white} " yn
-    case "${yn}" in
-      Y|y|Yes|yes|"")
-        select_msg "Yes"
-        status_msg "Flashing ${selected_mcu_id} ..."
-        if [[ ${method} == "regular" ]]; then
-          log_info "Flashing device '${selected_mcu_id}' with method '${method}'"
-          start_flash_mcu "${selected_mcu_id}"
-        elif [[ ${method} == "sdcard" ]]; then
-          log_info "Flashing device '${selected_mcu_id}' with method '${method}'"
-          start_flash_sd "${selected_mcu_id}"
-        else
-          print_error "No flash method set! Aborting..."
-          log_error "No flash method set!"
-          return
-        fi
-        break;;
-      N|n|No|no)
-        select_msg "No"
-        break;;
-      *)
-        error_msg "Invalid command!";;
-    esac
-  done
-}
-
-function start_flash_mcu() {
-  local device=${1}
-  do_action_service "stop" "klipper"
-
-  if make ${flash_command} FLASH_DEVICE="${device}"; then
-    ok_msg "Flashing successfull!"
-  else
-    warn_msg "Flashing failed!"
-    warn_msg "Please read the console output above!"
-  fi
-
-  do_action_service "start" "klipper"
-}
-
-function start_flash_sd() {
-  local i=0 board_list=() device=${1}
-  local flash_script="${KLIPPER_DIR}/scripts/flash-sdcard.sh"
-
-  ### write each supported board to the array to make it selectable
-  for board in $("${flash_script}" -l | tail -n +2); do
-    board_list+=("${board}")
-  done
-
-  top_border
-  echo -e "|  Please select the type of board that corresponds to  |"
-  echo -e "|  the currently selected MCU ID you chose before.      |"
-  blank_line
-  echo -e "|  The following boards are currently supported:        |"
-  hr
-  ### display all supported boards to the user
-  for board in "${board_list[@]}"; do
-    if [[ ${i} -lt 10 ]]; then
-      printf "|  ${i}) %-50s|\n" "${board_list[${i}]}"
-    else
-      printf "|  ${i}) %-49s|\n" "${board_list[${i}]}"
-    fi
-    i=$(( i + 1 ))
-  done
-  quit_footer
-
-  ### make the user select one of the boards
-  local choice
-  while true; do
-    read -p "${cyan}###### Please select board type:${white} " choice
-    if [[ ${choice} = "q" || ${choice} = "Q" ]]; then
-      clear && advanced_menu && break
-    elif [[ ${choice} -le ${#board_list[@]} ]]; then
-      local selected_board="${board_list[${choice}]}"
-      break
-    else
-      clear && print_header
-      error_msg "Invalid choice!"
-      flash_mcu_sd
-    fi
-  done
-
-  while true; do
-    echo
-    top_border
-    echo -e "| If your board is flashed with firmware that connects  |"
-    echo -e "| at a custom baud rate, please change it now.          |"
-    blank_line
-    echo -e "| If you are unsure, stick to the default 250000!       |"
-    bottom_border
-
-    local baud_rate regex="^[0-9]+$"
-    echo -e "${cyan}###### Please set the baud rate:${white} "
-    while [[ ! ${baud_rate} =~ ${regex} ]]; do
-      read -e -i "250000" -e baud_rate
-      local selected_baud_rate=${baud_rate}
-      break
-    done
-    break
-  done
-
-  ###flash process
-  do_action_service "stop" "klipper"
-  if "${flash_script}" -b "${selected_baud_rate}" "${device}" "${selected_board}"; then
-    print_confirm "Flashing successfull!"
-    log_info "Flash successfull!"
-  else
-    print_error "Flashing failed!\n Please read the console output above!"
-    log_error "Flash failed!"
-  fi
-  do_action_service "start" "klipper"
-}
-
-function build_fw() {
-  local python_version
-
-  if [[ ! -d ${KLIPPER_DIR} || ! -d ${KLIPPY_ENV} ]]; then
-    print_error "Klipper not found!\n Cannot build firmware without Klipper!"
-    return
-  fi
-
-  python_version=$(get_klipper_python_ver)
-
-  cd "${KLIPPER_DIR}"
-  status_msg "Initializing firmware build ..."
-  local dep=(build-essential dpkg-dev make)
-  dependency_check "${dep[@]}"
-
-  make clean
-
-  status_msg "Building firmware ..."
-  if (( python_version == 3 )); then
-    make PYTHON=python3 menuconfig
-    make PYTHON=python3
-  elif (( python_version == 2 )); then
-    make PYTHON=python2 menuconfig
-    make PYTHON=python2
-  else
-    warn_msg "Error reading Python version!"
-    return 1
-  fi
-
-  ok_msg "Firmware built!"
-}
-
-#================================================#
-#=================== HELPERS ====================#
-#================================================#
-
-function get_usb_id() {
-  unset mcu_list
-  sleep 1
-  mcus=$(find /dev/serial/by-id/* 2>/dev/null)
-
-  for mcu in ${mcus}; do
-    mcu_list+=("${mcu}")
-  done
-}
-
-function get_uart_id() {
-  unset mcu_list
-  sleep 1
-  mcus=$(find /dev -maxdepth 1 -regextype posix-extended -regex "^\/dev\/tty(AMA0|S0)$" 2>/dev/null)
-
-  for mcu in ${mcus}; do
-    mcu_list+=("${mcu}")
-  done
-}
-
-function get_dfu_id() {
-  unset mcu_list
-  sleep 1
-  mcus=$(lsusb | grep "DFU" | cut -d " " -f 6 2>/dev/null)
-
-  for mcu in ${mcus}; do
-    mcu_list+=("${mcu}")
-  done
-}
-
-function show_flash_method_help() {
-  top_border
-  echo -e "|     ~~~~~~~~ < ? > Help: Flash MCU < ? > ~~~~~~~~     |"
-  hr
-  echo -e "| ${cyan}Regular flashing method:${white}                              |"
-  echo -e "| The default method to flash controller boards which   |"
-  echo -e "| are connected and updated over USB and not by placing |"
-  echo -e "| a compiled firmware file onto an internal SD-Card.    |"
-  blank_line
-  echo -e "| Common controllers that get flashed that way are:     |"
-  echo -e "| - Arduino Mega 2560                                   |"
-  echo -e "| - Fysetc F6 / S6 (used without a Display + SD-Slot)   |"
-  blank_line
-  echo -e "| ${cyan}Updating via SD-Card Update:${white}                          |"
-  echo -e "| Many popular controller boards ship with a bootloader |"
-  echo -e "| capable of updating the firmware via SD-Card.         |"
-  echo -e "| Choose this method if your controller board supports  |"
-  echo -e "| this way of updating. This method ONLY works for up-  |"
-  echo -e "| grading firmware. The initial flashing procedure must |"
-  echo -e "| be done manually per the instructions that apply to   |"
-  echo -e "| your controller board.                                |"
-  blank_line
-  echo -e "| Common controllers that can be flashed that way are:  |"
-  echo -e "| - BigTreeTech SKR 1.3 / 1.4 (Turbo) / E3 / Mini E3    |"
-  echo -e "| - Fysetc F6 / S6 (used with a Display + SD-Slot)      |"
-  echo -e "| - Fysetc Spider                                       |"
-  blank_line
-  back_footer
-
-  local choice
-  while true; do
-    read -p "${cyan}###### Please select:${white} " choice
-    case "${choice}" in
-      B|b)
-        clear && print_header
-        init_flash_process
-        break;;
-      *)
-        error_msg "Invalid command!";;
-    esac
-  done
-}
-
-function show_mcu_flash_command_help() {
-  top_border
-  echo -e "|     ~~~~~~~~ < ? > Help: Flash MCU < ? > ~~~~~~~~     |"
-  hr
-  echo -e "| ${cyan}make flash:${white}                                           |"
-  echo -e "| The default command to flash controller board, it     |"
-  echo -e "| will detect selected microcontroller and use suitable |"
-  echo -e "| tool for flashing it.                                 |"
-  blank_line
-  echo -e "| ${cyan}make serialflash:${white}                                     |"
-  echo -e "| Special command to flash STM32 microcontrollers in    |"
-  echo -e "| DFU mode but connected via serial. stm32flash command |"
-  echo -e "| will be used internally.                              |"
-  blank_line
-  back_footer
-
-  local choice
-  while true; do
-    read -p "${cyan}###### Please select:${white} " choice
-    case "${choice}" in
-      B|b)
-        clear && print_header
-        select_flash_command
-        break;;
-      *)
-        error_msg "Invalid command!";;
-    esac
-  done
-}
-
-function show_mcu_connection_help() {
-  top_border
-  echo -e "|     ~~~~~~~~ < ? > Help: Flash MCU < ? > ~~~~~~~~     |"
-  hr
-  echo -e "| ${cyan}USB:${white}                                                  |"
-  echo -e "| Selecting USB as the connection method will scan the  |"
-  echo -e "| USB ports for connected controller boards. This will  |"
-  echo -e "| be similar to the 'ls /dev/serial/by-id/*' command    |"
-  echo -e "| suggested by the official Klipper documentation for   |"
-  echo -e "| determining successfull USB connections!              |"
-  blank_line
-  echo -e "| ${cyan}UART:${white}                                                 |"
-  echo -e "| Selecting UART as the connection method will list all |"
-  echo -e "| possible UART serial ports. Note: This method ALWAYS  |"
-  echo -e "| returns something as it seems impossible to determine |"
-  echo -e "| if a valid Klipper controller board is connected or   |"
-  echo -e "| not. Because of that, you ${red}MUST${white} know which UART serial |"
-  echo -e "| port your controller board is connected to when using |"
-  echo -e "| this connection method.                               |"
-  blank_line
-  back_footer
-
-  local choice
-  while true; do
-    read -p "${cyan}###### Please select:${white} " choice
-    case "${choice}" in
-      B|b)
-        clear && print_header
-        select_mcu_connection
-        break;;
-      *)
-        error_msg "Invalid command!";;
-    esac
-  done
-}
--- a/scripts/fluidd.sh
+++ b/scripts/fluidd.sh
@@ -1,510 +0,0 @@
-#!/usr/bin/env bash
-
-#=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
-#                                                                       #
-# This file is part of KIAUH - Klipper Installation And Update Helper   #
-# https://github.com/dw-0/kiauh                                         #
-#                                                                       #
-# This file may be distributed under the terms of the GNU GPLv3 license #
-#=======================================================================#
-
-set -e
-
-#===================================================#
-#================== INSTALL FLUIDD =================#
-#===================================================#
-
-function install_fluidd() {
-  if [[ -z $(moonraker_systemd) ]]; then
-    local error="Moonraker not installed! It's recommended to install Moonraker first!"
-    print_error "${error}"
-    while true; do
-      local yn
-      read -p "${cyan}###### Proceed to install Fluidd without installing Moonraker? (y/N):${white} " yn
-      case "${yn}" in
-        Y|y|Yes|yes)
-          select_msg "Yes"
-          break;;
-        N|n|No|no|"")
-          select_msg "No"
-          abort_msg "Exiting Fluidd setup ...\n"
-          return;;
-        *)
-          error_msg "Invalid Input!";;
-      esac
-    done
-  fi
-
-  ### checking dependencies
-  local dep=(wget nginx unzip)
-  dependency_check "${dep[@]}"
-  ### detect conflicting Haproxy and Apache2 installations
-  detect_conflicting_packages
-
-  status_msg "Initializing Fluidd installation ..."
-  ### first, we create a backup of the full klipper_config dir - safety first!
-  backup_config_dir
-
-  ### check for other enabled web interfaces
-  unset SET_LISTEN_PORT
-  detect_enabled_sites
-
-  ### check if another site already listens to port 80
-  fluidd_port_check
-
-  ### download fluidd
-  download_fluidd
-
-  ### ask user to install the recommended webinterface macros
-  install_fluidd_macros
-
-  ### create /etc/nginx/conf.d/upstreams.conf
-  set_upstream_nginx_cfg
-  ### create /etc/nginx/sites-available/<interface config>
-  set_nginx_cfg "fluidd"
-  ### nginx on ubuntu 21 and above needs special permissions to access the files
-  set_nginx_permissions
-
-  ### symlink nginx log
-  symlink_webui_nginx_log "fluidd"
-
-  ### add fluidd to the update manager in moonraker.conf
-  patch_fluidd_update_manager
-
-  fetch_webui_ports #WIP
-
-  ### confirm message
-  print_confirm "Fluidd has been set up!"
-}
-
-function install_fluidd_macros() {
-  local yn
-  while true; do
-    echo
-    top_border
-    echo -e "| It is recommended to use special macros in order to   |"
-    echo -e "| have Fluidd fully functional and working.             |"
-    blank_line
-    echo -e "| The recommended macros for Fluidd can be found here:  |"
-    echo -e "| https://github.com/fluidd-core/fluidd-config           |"
-    blank_line
-    echo -e "| If you already use these macros skip this step.       |"
-    echo -e "| Otherwise you should consider to answer with 'yes' to |"
-    echo -e "| download the recommended macros.                      |"
-    bottom_border
-    read -p "${cyan}###### Download the recommended macros? (Y/n):${white} " yn
-    case "${yn}" in
-      Y|y|Yes|yes|"")
-        select_msg "Yes"
-        download_fluidd_macros
-        break;;
-      N|n|No|no)
-        select_msg "No"
-        break;;
-      *)
-        print_error "Invalid command!";;
-    esac
-  done
-  return
-}
-
-function download_fluidd_macros() {
-  local ms_cfg_repo path configs regex line gcode_dir
-
-  ms_cfg_repo="https://github.com/fluidd-core/fluidd-config.git"
-  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/printer\.cfg"
-  configs=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
-
-  if [[ -z ${configs} ]]; then
-    print_error "No printer.cfg found! Installation of Macros will be skipped ..."
-    log_error "execution stopped! reason: no printer.cfg found"
-    return
-  fi
-
-  status_msg "Cloning fluidd-config ..."
-  [[ -d "${HOME}/fluidd-config" ]] && rm -rf "${HOME}/fluidd-config"
-  if git clone --recurse-submodules "${ms_cfg_repo}" "${HOME}/fluidd-config"; then
-    for config in ${configs}; do
-      path=$(echo "${config}" | rev | cut -d"/" -f2- | rev)
-
-      if [[ -e "${path}/fluidd.cfg" && ! -h "${path}/fluidd.cfg" ]]; then
-        warn_msg "Attention! Existing fluidd.cfg detected!"
-        warn_msg "The file will be renamed to 'fluidd.bak.cfg' to be able to continue with the installation."
-        if ! mv "${path}/fluidd.cfg" "${path}/fluidd.bak.cfg"; then
-          error_msg "Renaming fluidd.cfg failed! Aborting installation ..."
-          return
-        fi
-      fi
-
-      if [[ -h "${path}/fluidd.cfg" ]]; then
-        warn_msg "Recreating symlink in ${path} ..."
-        rm -rf "${path}/fluidd.cfg"
-      fi
-
-      if ! ln -sf "${HOME}/fluidd-config/client.cfg" "${path}/fluidd.cfg"; then
-        error_msg "Creating symlink failed! Aborting installation ..."
-        return
-      fi
-
-      if ! grep -Eq "^\[include fluidd.cfg\]$" "${path}/printer.cfg"; then
-        log_info "${path}/printer.cfg"
-        sed -i "1 i [include fluidd.cfg]" "${path}/printer.cfg"
-      fi
-
-      line=$(($(grep -n "\[include fluidd.cfg\]" "${path}/printer.cfg" | tail -1 | cut -d: -f1) + 1))
-      gcode_dir=${path/config/gcodes}
-      if ! grep -Eq "^\[virtual_sdcard\]$" "${path}/printer.cfg"; then
-        log_info "${path}/printer.cfg"
-        sed -i "${line} i \[virtual_sdcard]\npath: ${gcode_dir}\non_error_gcode: CANCEL_PRINT\n" "${path}/printer.cfg"
-      fi
-    done
-  else
-    print_error "Cloning failed! Aborting installation ..."
-    log_error "execution stopped! reason: cloning failed"
-    return
-  fi
-
-  patch_fluidd_config_update_manager
-
-  ok_msg "Done!"
-}
-
-function download_fluidd() {
-  local url
-  url=$(get_fluidd_download_url)
-
-  status_msg "Downloading Fluidd from ${url} ..."
-
-  if [[ -d ${FLUIDD_DIR} ]]; then
-    rm -rf "${FLUIDD_DIR}"
-  fi
-
-  mkdir "${FLUIDD_DIR}" && cd "${FLUIDD_DIR}"
-
-  if wget "${url}"; then
-    ok_msg "Download complete!"
-    status_msg "Extracting archive ..."
-    unzip -q -o ./*.zip && ok_msg "Done!"
-    status_msg "Remove downloaded archive ..."
-    rm -rf ./*.zip && ok_msg "Done!"
-  else
-    print_error "Downloading Fluidd from\n ${url}\n failed!"
-    exit 1
-  fi
-}
-
-#===================================================#
-#================== REMOVE FLUIDD ==================#
-#===================================================#
-
-function remove_fluidd_dir() {
-  [[ ! -d ${FLUIDD_DIR} ]] && return
-
-  status_msg "Removing Fluidd directory ..."
-  rm -rf "${FLUIDD_DIR}" && ok_msg "Directory removed!"
-}
-
-function remove_fluidd_nginx_config() {
-  if [[ -e "/etc/nginx/sites-available/fluidd" ]]; then
-    status_msg "Removing Fluidd configuration for Nginx ..."
-    sudo rm "/etc/nginx/sites-available/fluidd" && ok_msg "File removed!"
-  fi
-  if [[ -L "/etc/nginx/sites-enabled/fluidd" ]]; then
-    status_msg "Removing Fluidd Symlink for Nginx ..."
-    sudo rm "/etc/nginx/sites-enabled/fluidd" && ok_msg "File removed!"
-  fi
-}
-
-function remove_fluidd_logs() {
-  local files
-  files=$(find /var/log/nginx -name "fluidd*" 2> /dev/null | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      sudo rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_fluidd_log_symlinks() {
-  local files regex
-
-  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/logs\/fluidd-.*"
-  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" 2> /dev/null | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_legacy_fluidd_log_symlinks() {
-  local files
-  files=$(find "${HOME}/klipper_logs" -name "fluidd*" 2> /dev/null | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_fluidd_config() {
-  if [[ -d "${HOME}/fluidd-config"  ]]; then
-    status_msg "Removing ${HOME}/fluidd-config ..."
-    rm -rf "${HOME}/fluidd-config"
-    ok_msg "${HOME}/fluidd-config removed!"
-    print_confirm "Fluidd-Config successfully removed!"
-  fi
-}
-
-function remove_fluidd() {
-  remove_fluidd_dir
-  remove_fluidd_nginx_config
-  remove_fluidd_logs
-  remove_fluidd_log_symlinks
-  remove_legacy_fluidd_log_symlinks
-
-  ### remove fluidd_port from ~/.kiauh.ini
-  sed -i "/^fluidd_port=/d" "${INI_FILE}"
-
-  print_confirm "Fluidd successfully removed!"
-}
-
-#===================================================#
-#================== UPDATE FLUIDD ==================#
-#===================================================#
-
-function update_fluidd() {
-  backup_before_update "fluidd"
-  status_msg "Updating Fluidd ..."
-  download_fluidd
-  match_nginx_configs
-  symlink_webui_nginx_log "fluidd"
-  print_confirm "Fluidd successfully updated!"
-}
-
-#===================================================#
-#================== FLUIDD STATUS ==================#
-#===================================================#
-
-function get_fluidd_status() {
-  local status
-  local data_arr=("${FLUIDD_DIR}" "${NGINX_SA}/fluidd" "${NGINX_SE}/fluidd")
-
-  ### count+1 for each found data-item from array
-  local filecount=0
-  for data in "${data_arr[@]}"; do
-    [[ -e ${data} ]] && filecount=$(( filecount + 1 ))
-  done
-
-  if (( filecount == ${#data_arr[*]} )); then
-    status="Installed!"
-  elif (( filecount == 0 )); then
-    status="Not installed!"
-  else
-    status="Incomplete!"
-  fi
-  echo "${status}"
-}
-
-function get_local_fluidd_version() {
-  local versionfile="${FLUIDD_DIR}/.version"
-  local relinfofile="${FLUIDD_DIR}/release_info.json"
-  local version
-
-  if [[ -f ${relinfofile} ]]; then
-    version=$(grep -o '"version":"[^"]*' "${relinfofile}" | grep -o '[^"]*$')
-  elif [[ -f ${versionfile} ]]; then
-    version=$(head -n 1 "${versionfile}")
-  fi
-
-  echo "${version}"
-}
-
-function get_remote_fluidd_version() {
-  [[ ! $(dpkg-query -f'${Status}' --show curl 2>/dev/null) = *\ installed ]] && return
-
-  local tags
-  tags=$(curl -s "https://api.github.com/repos/fluidd-core/fluidd/tags" | grep "name" | cut -d'"' -f4)
-  echo "${tags}" | head -1
-}
-
-function compare_fluidd_versions() {
-  local versions local_ver remote_ver
-  local_ver="$(get_local_fluidd_version)"
-  remote_ver="$(get_remote_fluidd_version)"
-
-  if [[ ${local_ver} != "${remote_ver}" && ${local_ver} != "" ]]; then
-    versions="${yellow}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-    # add moonraker to application_updates_available in kiauh.ini
-    add_to_application_updates "fluidd"
-  else
-    versions="${green}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-  fi
-
-  echo "${versions}"
-}
-
-#================================================#
-#=================== HELPERS ====================#
-#================================================#
-
-function get_fluidd_download_url() {
-  local releases_by_tag tags tag unstable_url url
-
-  ### latest stable download url
-  url="https://github.com/fluidd-core/fluidd/releases/latest/download/fluidd.zip"
-
-  read_kiauh_ini "${FUNCNAME[0]}"
-  if [[ ${fluidd_install_unstable} == "true" ]]; then
-    releases_by_tag="https://api.github.com/repos/fluidd-core/fluidd/tags"
-    tags=$(curl -s "${releases_by_tag}" | grep "name" | cut -d'"' -f4)
-    tag=$(echo "${tags}" | head -1)
-
-    ### latest unstable download url including pre-releases (alpha, beta, rc)
-    unstable_url="https://github.com/fluidd-core/fluidd/releases/download/${tag}/fluidd.zip"
-
-    if [[ ${unstable_url} == *"download//"* ]]; then
-      warn_msg "Download URL broken! Falling back to URL of latest stable release!"
-    else
-      url=${unstable_url}
-    fi
-  fi
-
-  echo "${url}"
-}
-
-function fluidd_port_check() {
-  if [[ ${FLUIDD_ENABLED} == "false" ]]; then
-
-    if [[ ${SITE_ENABLED} == "true" ]]; then
-      status_msg "Detected other enabled interfaces:"
-
-      [[ ${MAINSAIL_ENABLED} == "true" ]] && \
-      echo "   ${cyan}● Mainsail - Port: ${MAINSAIL_PORT}${white}"
-
-      if [[ ${MAINSAIL_PORT} == "80" ]]; then
-        PORT_80_BLOCKED="true"
-        select_fluidd_port
-      fi
-    else
-      DEFAULT_PORT=$(grep listen "${KIAUH_SRCDIR}/resources/fluidd" | head -1 | sed 's/^\s*//' | cut -d" " -f2 | cut -d";" -f1)
-      SET_LISTEN_PORT=${DEFAULT_PORT}
-    fi
-    SET_NGINX_CFG="true"
-
-  else
-    SET_NGINX_CFG="false"
-  fi
-}
-
-function select_fluidd_port() {
-  if [[ ${PORT_80_BLOCKED} == "true" ]]; then
-    echo
-    top_border
-    echo -e "|                    ${red}!!!WARNING!!!${white}                      |"
-    echo -e "| ${red}You need to choose a different port for Fluidd!${white}       |"
-    echo -e "| ${red}The following web interface is listening at port 80:${white}  |"
-    blank_line
-    [[ ${MAINSAIL_PORT} == "80" ]] && echo "|  ● Mainsail                                           |"
-    blank_line
-    echo -e "| Make sure you don't choose a port which was already   |"
-    echo -e "| assigned to another webinterface!                     |"
-    blank_line
-    echo -e "| Be aware: there is ${red}NO${white} sanity check for the following  |"
-    echo -e "| input. So make sure to choose a valid port!           |"
-    bottom_border
-
-    local new_port re="^[0-9]+$"
-    while true; do
-      read -p "${cyan}Please enter a new Port:${white} " new_port
-      if [[ ${new_port} =~ ${re} && ${new_port} != "${MAINSAIL_PORT}" ]]; then
-        select_msg "Setting port ${new_port} for Fluidd!"
-        SET_LISTEN_PORT=${new_port}
-        break
-      else
-        if [[ ! ${new_port} =~ ${re}  ]]; then
-          error_msg "Invalid input!"
-        else
-          error_msg "Port already taken! Select a different one!"
-        fi
-      fi
-    done
-  fi
-}
-
-function patch_fluidd_update_manager() {
-  local patched moonraker_configs regex
-  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
-  moonraker_configs=$(find "${HOME}" -maxdepth 3 -type f -regextype posix-extended -regex "${regex}" | sort)
-
-  patched="false"
-  for conf in ${moonraker_configs}; do
-    if ! grep -Eq "^\[update_manager fluidd\]\s*$" "${conf}"; then
-      ### add new line to conf if it doesn't end with one
-      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"
-
-      ### add Fluidds update manager section to moonraker.conf
-      status_msg "Adding Fluidd to update manager in file:\n       ${conf}"
-      /bin/sh -c "cat >> ${conf}" << MOONRAKER_CONF
-
-[update_manager fluidd]
-type: web
-channel: stable
-repo: fluidd-core/fluidd
-path: ~/fluidd
-MOONRAKER_CONF
-
-    fi
-
-    patched="true"
-  done
-
-  if [[ ${patched} == "true" ]]; then
-    do_action_service "restart" "moonraker"
-  fi
-}
-
-function patch_fluidd_config_update_manager() {
-  local patched moonraker_configs regex
-  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
-  moonraker_configs=$(find "${HOME}" -maxdepth 3 -type f -regextype posix-extended -regex "${regex}" | sort)
-
-  patched="false"
-  for conf in ${moonraker_configs}; do
-    if ! grep -Eq "^\[update_manager fluidd-config\]\s*$" "${conf}"; then
-      ### add new line to conf if it doesn't end with one
-      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"
-
-      ### add Fluidds update manager section to moonraker.conf
-      status_msg "Adding Fluidd-Config to update manager in file:\n       ${conf}"
-      /bin/sh -c "cat >> ${conf}" << MOONRAKER_CONF
-
-[update_manager fluidd-config]
-type: git_repo
-primary_branch: master
-path: ~/fluidd-config
-origin: https://github.com/fluidd-core/fluidd-config.git
-managed_services: klipper
-MOONRAKER_CONF
-
-    fi
-
-    patched="true"
-  done
-
-  if [[ ${patched} == "true" ]]; then
-    do_action_service "restart" "moonraker"
-  fi
-}
--- a/scripts/gcode_shell_command.sh
+++ b/scripts/gcode_shell_command.sh
@@ -1,123 +0,0 @@
-#!/usr/bin/env bash
-
-#=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
-#                                                                       #
-# This file is part of KIAUH - Klipper Installation And Update Helper   #
-# https://github.com/dw-0/kiauh                                         #
-#                                                                       #
-# This file may be distributed under the terms of the GNU GPLv3 license #
-#=======================================================================#
-
-set -e
-
-#=================================================#
-#======== INSTALL GCODE_SHELL_COMMAND.PY =========#
-#=================================================#
-
-function setup_gcode_shell_command() {
-  top_border
-  echo -e "| You are about to install the 'G-Code Shell Command'   |"
-  echo -e "| extension. Please make sure to read the instructions  |"
-  echo -e "| before you continue and remember that potential risks |"
-  echo -e "| can be involved after installing this extension!      |"
-  blank_line
-  echo -e "| ${red}You accept that you are doing this on your own risk!${white}  |"
-  bottom_border
-
-  local yn
-  while true; do
-    read -p "${cyan}###### Do you want to continue? (Y/n):${white} " yn
-    case "${yn}" in
-      Y|y|Yes|yes|"")
-        select_msg "Yes"
-
-        if [[ ! -d "${KLIPPER_DIR}/klippy/extras" ]]; then
-          print_error "Folder ~/klipper/klippy/extras not found!\n      Klipper not installed yet?"
-          return
-        fi
-
-        status_msg "Installing gcode shell command extension ..."
-
-        if [[ ! -f "${KLIPPER_DIR}/klippy/extras/gcode_shell_command.py" ]]; then
-          install_gcode_shell_command
-        else
-          echo; warn_msg "File 'gcode_shell_command.py' already exists in the destination location!"
-
-          while true; do
-            read -p "${cyan}###### Do you want to overwrite it? (Y/n):${white} " yn
-            case "${yn}" in
-              Y|y|Yes|yes|"")
-                select_msg "Yes"
-                rm -f "${KLIPPER_DIR}/klippy/extras/gcode_shell_command.py"
-                install_gcode_shell_command
-                break;;
-              N|n|No|no)
-                select_msg "No"
-                break;;
-              *)
-                error_msg "Invalid Input!";;
-            esac
-          done
-        fi
-        return;;
-      N|n|No|no)
-        select_msg "No"
-        return;;
-      *)
-        error_msg "Invalid Input!";;
-    esac
-  done
-}
-
-function install_gcode_shell_command() {
-  do_action_service "stop" "klipper"
-  status_msg "Copy 'gcode_shell_command.py' to '${KLIPPER_DIR}/klippy/extras' ..."
-
-  if cp "${KIAUH_SRCDIR}/resources/gcode_shell_command.py" "${KLIPPER_DIR}/klippy/extras"; then
-    ok_msg "Done!"
-  else
-    error_msg "Cannot copy file to target destination...Exiting!"
-    return 1
-  fi
-
-  local yn
-  while true; do
-    echo
-    read -p "${cyan}###### Create an example shell command? (Y/n):${white} " yn
-    case "${yn}" in
-      Y|y|Yes|yes|"")
-        select_msg "Yes"
-        create_example_shell_command
-        break;;
-      N|n|No|no)
-        select_msg "No"
-        break;;
-    esac
-  done
-
-  do_action_service "restart" "klipper"
-  print_confirm "Shell command extension installed!"
-  return
-}
-
-function create_example_shell_command() {
-  ### create a backup of the config folder
-  backup_config_dir
-
-  local configs regex path
-  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/printer\.cfg"
-  configs=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
-
-  for cfg in ${configs}; do
-    path=$(echo "${cfg}" | rev | cut -d"/" -f2- | rev)
-
-    if [[ ! -f "${path}/shell_command.cfg" ]]; then
-      status_msg "Copy shell_command.cfg to ${path} ..."
-      cp "${KIAUH_SRCDIR}/resources/shell_command.cfg" "${path}"
-      ok_msg "${path}/shell_command.cfg created!"
-      ### write include to the very first line of the printer.cfg
-      sed -i "1 i [include shell_command.cfg]" "${cfg}"
-    fi
-  done
-}
--- a/scripts/globals.sh
+++ b/scripts/globals.sh
@@ -1,95 +0,0 @@
-#!/usr/bin/env bash
-
-#=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
-#                                                                       #
-# This file is part of KIAUH - Klipper Installation And Update Helper   #
-# https://github.com/dw-0/kiauh                                         #
-#                                                                       #
-# This file may be distributed under the terms of the GNU GPLv3 license #
-#=======================================================================#
-
-# shellcheck disable=SC2034
-set -e
-
-function set_globals() {
-  #=================== SYSTEM ===================#
-  SYSTEMD="/etc/systemd/system"
-  INITD="/etc/init.d"
-  ETCDEF="/etc/default"
-
-  #=================== KIAUH ====================#
-  green=$(echo -en "\e[92m")
-  yellow=$(echo -en "\e[93m")
-  magenta=$(echo -en "\e[35m")
-  red=$(echo -en "\e[91m")
-  cyan=$(echo -en "\e[96m")
-  white=$(echo -en "\e[39m")
-  INI_FILE="${HOME}/.kiauh.ini"
-  LOGFILE="/tmp/kiauh.log"
-  RESOURCES="${KIAUH_SRCDIR}/resources"
-  BACKUP_DIR="${HOME}/kiauh-backups"
-
-  #================== KLIPPER ===================#
-  KLIPPY_ENV="${HOME}/klippy-env"
-  KLIPPER_DIR="${HOME}/klipper"
-  KLIPPER_REPO="https://github.com/Klipper3d/klipper.git"
-
-  #================= MOONRAKER ==================#
-  MOONRAKER_ENV="${HOME}/moonraker-env"
-  MOONRAKER_DIR="${HOME}/moonraker"
-  MOONRAKER_REPO="https://github.com/Arksine/moonraker.git"
-
-  #================= MAINSAIL ===================#
-  MAINSAIL_DIR="${HOME}/mainsail"
-
-  #================== FLUIDD ====================#
-  FLUIDD_DIR="${HOME}/fluidd"
-
-  #=============== KLIPPERSCREEN ================#
-  KLIPPERSCREEN_ENV="${HOME}/.KlipperScreen-env"
-  KLIPPERSCREEN_DIR="${HOME}/KlipperScreen"
-  KLIPPERSCREEN_REPO="https://github.com/jordanruthe/KlipperScreen.git"
-
-  #========== MOONRAKER-TELEGRAM-BOT ============#
-  TELEGRAM_BOT_ENV="${HOME}/moonraker-telegram-bot-env"
-  TELEGRAM_BOT_DIR="${HOME}/moonraker-telegram-bot"
-  TELEGRAM_BOT_REPO="https://github.com/nlef/moonraker-telegram-bot.git"
-
-  #=============== PRETTY-GCODE =================#
-  PGC_DIR="${HOME}/pgcode"
-  PGC_REPO="https://github.com/Kragrathea/pgcode"
-
-  #================== NGINX =====================#
-  NGINX_SA="/etc/nginx/sites-available"
-  NGINX_SE="/etc/nginx/sites-enabled"
-  NGINX_CONFD="/etc/nginx/conf.d"
-
-  #=============== MOONRAKER-OBICO ================#
-  MOONRAKER_OBICO_DIR="${HOME}/moonraker-obico"
-  MOONRAKER_OBICO_REPO="https://github.com/TheSpaghettiDetective/moonraker-obico.git"
-
-  #=============== OCTOEVERYWHERE ================#
-  OCTOEVERYWHERE_ENV="${HOME}/octoeverywhere-env"
-  OCTOEVERYWHERE_DIR="${HOME}/octoeverywhere"
-  OCTOEVERYWHERE_REPO="https://github.com/QuinnDamerell/OctoPrint-OctoEverywhere.git"
-
-  #=============== Crowsnest ================#
-  CROWSNEST_DIR="${HOME}/crowsnest"
-  CROWSNEST_REPO="https://github.com/mainsail-crew/crowsnest.git"
-
-  #=============== Mobileraker ================#
-  MOBILERAKER_ENV="${HOME}/mobileraker-env"
-  MOBILERAKER_DIR="${HOME}/mobileraker_companion"
-  MOBILERAKER_REPO="https://github.com/Clon1998/mobileraker_companion.git"
-
-  #=============== OCTOAPP ================#
-  OCTOAPP_ENV="${HOME}/octoapp-env"
-  OCTOAPP_DIR="${HOME}/octoapp"
-  OCTOAPP_REPO="https://github.com/crysxd/OctoApp-Plugin.git"
-
-  #=============== Spoolman ================#
-  SPOOLMAN_DIR="${HOME}/Spoolman"
-  SPOOLMAN_DB_DIR="${HOME}/.local/share/spoolman"
-  SPOOLMAN_REPO="https://api.github.com/repos/Donkie/Spoolman/releases/latest"
-}
--- a/scripts/klipper.sh
+++ b/scripts/klipper.sh
@@ -1,664 +0,0 @@
-#!/usr/bin/env bash
-
-#=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
-#                                                                       #
-# This file is part of KIAUH - Klipper Installation And Update Helper   #
-# https://github.com/dw-0/kiauh                                         #
-#                                                                       #
-# This file may be distributed under the terms of the GNU GPLv3 license #
-#=======================================================================#
-
-set -e
-
-#TODO (multi instance):
-# if the klipper installer is started another time while other klipper
-# instances are detected, ask if new instances should be added
-
-#=================================================#
-#================ INSTALL KLIPPER ================#
-#=================================================#
-
-###
-# this function detects all installed klipper
-# systemd instances and returns their absolute path
-function klipper_systemd() {
-  local services
-  local blacklist
-  local ignore
-  local match
-
-  ###
-  # any service that uses "klipper" in its own name but isn't a full klipper service must be blacklisted using
-  # this variable, otherwise they will be falsely recognized as klipper instances. E.g. "klipper-mcu.service"
-  # is not a klipper service, but related to klippers linux mcu, which also requires its own service file, hence
-  # it must be blacklisted.
-  blacklist="mcu"
-
-  ignore="${SYSTEMD}/klipper-(${blacklist}).service"
-  match="${SYSTEMD}/klipper(-[0-9a-zA-Z]+)?.service"
-
-  services=$(find "${SYSTEMD}" -maxdepth 1 -regextype awk ! -regex "${ignore}" -regex "${match}" | sort)
-  echo "${services}"
-}
-
-function start_klipper_setup() {
-  local klipper_systemd_services
-  local python_version
-  local instance_count
-  local instance_names
-  local use_custom_names
-  local input
-  local regex
-  local blacklist
-  local error
-
-  status_msg "Initializing Klipper installation ...\n"
-
-  ### return early if klipper already exists
-  klipper_systemd_services=$(klipper_systemd)
-
-  if [[ -n ${klipper_systemd_services} ]]; then
-    error="At least one Klipper service is already installed:"
-
-    for s in ${klipper_systemd_services}; do
-      log_info "Found Klipper service: ${s}"
-      error="${error}\n ➔ ${s}"
-    done
-  fi
-  [[ -n ${error} ]] && print_error "${error}" && return
-
-  ### user selection for python version
-  print_dialog_user_select_python_version
-  while true; do
-    read -p "${cyan}###### Select Python version:${white} " -i "1" -e input
-    case "${input}" in
-      1)
-        select_msg "Python 3.x\n"
-        python_version=3
-        break;;
-      2)
-        select_msg "Python 2.7\n"
-        python_version=2
-        break;;
-      B|b)
-        clear; install_menu; break;;
-      *)
-        error_msg "Invalid Input!\n";;
-    esac
-  done && input=""
-
-  ### user selection for instance count
-  print_dialog_user_select_instance_count
-  regex="^[1-9][0-9]*$"
-  while [[ ! ${input} =~ ${regex} ]]; do
-    read -p "${cyan}###### Number of Klipper instances to set up:${white} " -i "1" -e input
-
-    if [[ ${input} =~ ${regex} ]]; then
-      instance_count="${input}"
-      select_msg "Instance count: ${instance_count}\n"
-      break
-    elif [[ ${input} == "B" || ${input} == "b" ]]; then
-      install_menu
-    else
-      error_msg "Invalid Input!\n"
-    fi
-  done && input=""
-
-  ### user selection for custom names
-  use_custom_names="false"
-  if (( instance_count > 1 )); then
-    print_dialog_user_select_custom_name_bool
-    while true; do
-      read -p "${cyan}###### Assign custom names? (y/N):${white} " input
-      case "${input}" in
-        Y|y|Yes|yes)
-          select_msg "Yes\n"
-          use_custom_names="true"
-          break;;
-        N|n|No|no|"")
-          select_msg "No\n"
-          break;;
-        B|b)
-          clear; install_menu; break;;
-        *)
-          error_msg "Invalid Input!\n";;
-      esac
-    done && input=""
-  else
-    instance_names+=("printer")
-  fi
-
-  ### user selection for setting the actual custom names
-  shopt -s nocasematch
-  if (( instance_count > 1 )) && [[ ${use_custom_names} == "true" ]]; then
-    local i
-
-    i=1
-    regex="^[0-9a-zA-Z]+$"
-    blacklist="mcu"
-    while [[ ! ${input} =~ ${regex} || ${input} =~ ${blacklist} || ${i} -le ${instance_count} ]]; do
-      read -p "${cyan}###### Name for instance #${i}:${white} " input
-
-      if [[ ${input} =~ ${blacklist} ]]; then
-        error_msg "Name not allowed! You are trying to use a reserved name."
-      elif [[ ${input} =~ ${regex} && ! ${input} =~ ${blacklist} ]]; then
-        select_msg "Name: ${input}\n"
-        if [[ ${input} =~ ^[0-9]+$ ]]; then
-          instance_names+=("printer_${input}")
-        else
-          instance_names+=("${input}")
-        fi
-        i=$(( i + 1 ))
-      else
-        error_msg "Invalid Input!\n"
-      fi
-    done && input=""
-  elif (( instance_count > 1 )) && [[ ${use_custom_names} == "false" ]]; then
-    for (( i=1; i <= instance_count; i++ )); do
-      instance_names+=("printer_${i}")
-    done
-  fi
-  shopt -u nocasematch
-
-  (( instance_count > 1 )) && status_msg "Installing ${instance_count} Klipper instances ..."
-  (( instance_count == 1 )) && status_msg "Installing single Klipper instance ..."
-
-  run_klipper_setup "${python_version}" "${instance_names[@]}"
-}
-
-function print_dialog_user_select_python_version() {
-  top_border
-  echo -e "| Please select your preferred Python version.          | "
-  echo -e "| The recommended version is Python 3.x.                | "
-  hr
-  echo -e "|  1) [Python 3.x]  (recommended)                       | "
-  echo -e "|  2) [Python 2.7]  ${yellow}(legacy)${white}                            | "
-  back_footer
-}
-
-function print_dialog_user_select_instance_count() {
-  top_border
-  echo -e "| Please select the number of Klipper instances to set  |"
-  echo -e "| up. The number of Klipper instances will determine    |"
-  echo -e "| the amount of printers you can run from this host.    |"
-  blank_line
-  echo -e "| ${yellow}WARNING:${white}                                              |"
-  echo -e "| ${yellow}Setting up too many instances may crash your system.${white}  |"
-  back_footer
-}
-
-function print_dialog_user_select_custom_name_bool() {
-  top_border
-  echo -e "| You can now assign a custom name to each instance.    |"
-  echo -e "| If skipped, each instance will get an index assigned  |"
-  echo -e "| in ascending order, starting at index '1'.            |"
-  blank_line
-  echo -e "| Info:                                                 |"
-  echo -e "| Only alphanumeric characters for names are allowed!   |"
-  back_footer
-}
-
-function run_klipper_setup() {
-  read_kiauh_ini "${FUNCNAME[0]}"
-
-  local python_version=${1}
-  local instance_names
-  local confirm
-  local custom_repo
-  local custom_branch
-  local dep
-
-  shift 1
-  read -r -a instance_names <<< "${@}"
-
-  custom_repo="${custom_klipper_repo}"
-  custom_branch="${custom_klipper_repo_branch}"
-  dep=(git)
-
-  ### checking dependencies
-  dependency_check "${dep[@]}"
-
-  ### step 1: clone klipper
-  clone_klipper "${custom_repo}" "${custom_branch}"
-
-  ### step 2: install klipper dependencies and create python virtualenv
-  install_klipper_packages "${python_version}"
-  create_klipper_virtualenv "${python_version}"
-
-  ### step 3: create klipper instances
-  for instance in "${instance_names[@]}"; do
-    create_klipper_service "${instance}"
-  done
-
-  ### step 4: enable and start all instances
-  do_action_service "enable" "klipper"
-  do_action_service "start" "klipper"
-
-  ### step 5: check for dialout group membership
-  check_usergroups
-
-  ### confirm message
-  (( ${#instance_names[@]} == 1 )) && confirm="Klipper has been set up!"
-  (( ${#instance_names[@]} > 1 )) && confirm="${#instance_names[@]} Klipper instances have been set up!"
-
-  ### finalizing the setup with writing instance names to the kiauh.ini
-  set_multi_instance_names
-  mask_disrupting_services
-
-  print_confirm "${confirm}" && return
-}
-
-function clone_klipper() {
-  local repo=${1} branch=${2}
-
-  [[ -z ${repo} ]] && repo="${KLIPPER_REPO}"
-  repo=$(echo "${repo}" | sed -r "s/^(http|https):\/\/github\.com\///i; s/\.git$//")
-  repo="https://github.com/${repo}"
-
-  [[ -z ${branch} ]] && branch="master"
-
-  ### force remove existing klipper dir and clone into fresh klipper dir
-  [[ -d ${KLIPPER_DIR} ]] && rm -rf "${KLIPPER_DIR}"
-
-  status_msg "Cloning Klipper from ${repo} ..."
-
-  cd "${HOME}" || exit 1
-  if git clone "${repo}" "${KLIPPER_DIR}"; then
-    cd "${KLIPPER_DIR}" && git checkout "${branch}"
-  else
-    print_error "Cloning Klipper from\n ${repo}\n failed!"
-    exit 1
-  fi
-}
-
-function create_klipper_virtualenv() {
-  local python_version="${1}"
-
-  [[ -d ${KLIPPY_ENV} ]] && rm -rf "${KLIPPY_ENV}"
-
-  status_msg "Installing $("python${python_version}" -V) virtual environment..."
-
-  if virtualenv -p "python${python_version}" "${KLIPPY_ENV}"; then
-    "${KLIPPY_ENV}"/bin/pip install -r "${KLIPPER_DIR}"/scripts/klippy-requirements.txt
-  else
-    log_error "failure while creating python3 klippy-env"
-    error_msg "Creation of Klipper virtualenv failed!"
-    exit 1
-  fi
-}
-
-###
-# extracts the required packages from the
-# install-debian.sh script and installs them
-#
-# @param {string}: python_version - klipper-env python version
-#
-function install_klipper_packages() {
-  local packages log_name="Klipper" python_version="${1}"
-  local install_script="${KLIPPER_DIR}/scripts/install-debian.sh"
-
-  status_msg "Reading dependencies..."
-  # shellcheck disable=SC2016
-  packages=$(grep "PKGLIST=" "${install_script}" | cut -d'"' -f2 | sed 's/\${PKGLIST}//g' | tr -d '\n')
-  ### add dfu-util for octopi-images
-  packages+=" dfu-util"
-  ### add pkg-config for rp2040 build
-  packages+=" pkg-config"
-  ### add dbus requirement for DietPi distro
-  [[ -e "/boot/dietpi/.version" ]] && packages+=" dbus"
-
-  if (( python_version == 3 )); then
-    ### replace python-dev with python3-dev if python3 was selected
-    packages="${packages//python-dev/python3-dev}"
-  elif (( python_version == 2 )); then
-    ### package name 'python-dev' is deprecated (-> no installation candidate) on more modern linux distros
-    packages="${packages//python-dev/python2-dev}"
-  else
-    log_error "Internal Error: missing parameter 'python_version' during function call of ${FUNCNAME[0]}"
-    error_msg "Internal Error: missing parameter 'python_version' during function call of ${FUNCNAME[0]}"
-    exit 1
-  fi
-
-  echo "${cyan}${packages}${white}" | tr '[:space:]' '\n'
-  read -r -a packages <<< "${packages}"
-
-  ### Update system package lists if stale
-  update_system_package_lists
-
-  ### Install required packages
-  install_system_packages "${log_name}" "packages[@]"
-}
-
-function create_klipper_service() {
-  local instance_name=${1}
-
-  local printer_data
-  local cfg_dir
-  local gcodes_dir
-  local cfg
-  local log
-  local klippy_serial
-  local klippy_socket
-  local env_file
-  local service
-  local service_template
-  local env_template
-  local suffix
-
-  printer_data="${HOME}/${instance_name}_data"
-  cfg_dir="${printer_data}/config"
-  gcodes_dir="${printer_data}/gcodes"
-  cfg="${cfg_dir}/printer.cfg"
-  log="${printer_data}/logs/klippy.log"
-  klippy_serial="${printer_data}/comms/klippy.serial"
-  klippy_socket="${printer_data}/comms/klippy.sock"
-  env_file="${printer_data}/systemd/klipper.env"
-
-  if [[ ${instance_name} == "printer" ]]; then
-    suffix="${instance_name//printer/}"
-  else
-    suffix="-${instance_name//printer_/}"
-  fi
-
-  create_required_folders "${printer_data}"
-
-  service_template="${KIAUH_SRCDIR}/resources/klipper.service"
-  env_template="${KIAUH_SRCDIR}/resources/klipper.env"
-  service="${SYSTEMD}/klipper${suffix}.service"
-
-  if [[ ! -f ${service} ]]; then
-    status_msg "Create Klipper service file ..."
-
-    sudo cp "${service_template}" "${service}"
-    sudo cp "${env_template}" "${env_file}"
-    sudo sed -i "s|%USER%|${USER}|g; s|%KLIPPER_DIR%|${KLIPPER_DIR}|; s|%ENV%|${KLIPPY_ENV}|; s|%ENV_FILE%|${env_file}|" "${service}"
-    sudo sed -i "s|%USER%|${USER}|; s|%KLIPPER_DIR%|${KLIPPER_DIR}|; s|%LOG%|${log}|; s|%CFG%|${cfg}|; s|%PRINTER%|${klippy_serial}|; s|%UDS%|${klippy_socket}|" "${env_file}"
-
-    ok_msg "Klipper service file created!"
-  fi
-
-  if [[ ! -f ${cfg} ]]; then
-    write_example_printer_cfg "${cfg}" "${gcodes_dir}"
-  fi
-}
-
-function write_example_printer_cfg() {
-  local cfg=${1}
-  local gcodes_dir=${2}
-  local cfg_template
-
-  cfg_template="${KIAUH_SRCDIR}/resources/example.printer.cfg"
-
-  status_msg "Creating minimal example printer.cfg ..."
-  if cp "${cfg_template}" "${cfg}"; then
-    sed -i "s|%GCODES_DIR%|${gcodes_dir}|" "${cfg}"
-    ok_msg "Minimal example printer.cfg created!"
-  else
-    error_msg "Couldn't create minimal example printer.cfg!"
-  fi
-}
-
-#================================================#
-#================ REMOVE KLIPPER ================#
-#================================================#
-
-function remove_klipper_service() {
-  [[ -z $(klipper_systemd) ]] && return
-
-  status_msg "Removing Klipper services ..."
-
-  for service in $(klipper_systemd | cut -d"/" -f5); do
-    status_msg "Removing ${service} ..."
-    sudo systemctl stop "${service}"
-    sudo systemctl disable "${service}"
-    sudo rm -f "${SYSTEMD}/${service}"
-    sudo systemctl daemon-reload
-    sudo systemctl reset-failed
-  done
-
-  ok_msg "All Klipper services removed!"
-}
-
-function find_instance_files() {
-  local target_folder=${1}
-  local target_name=${2}
-  local files
-
-  readarray -t files < <(find "${HOME}" -regex "${HOME}/[A-Za-z0-9_]+_data/${target_folder}/${target_name}" | sort)
-
-  echo -e "${files[@]}"
-}
-
-function find_legacy_klipper_logs() {
-  local files
-  local regex="klippy(-[0-9a-zA-Z]+)?\.log(.*)?"
-
-  readarray -t files < <(find "${HOME}/klipper_logs" -maxdepth 1 -regextype posix-extended -regex "${HOME}/klipper_logs/${regex}" 2> /dev/null | sort)
-  echo -e "${files[@]}"
-}
-
-function find_legacy_klipper_uds() {
-  local files
-
-  readarray -t files < <(find /tmp -maxdepth 1 -regextype posix-extended -regex "/tmp/klippy_uds(-[0-9a-zA-Z]+)?" | sort)
-  echo -e "${files[@]}"
-}
-
-function find_legacy_klipper_printer() {
-  local files
-
-  readarray -t files < <(find /tmp -maxdepth 1 -regextype posix-extended -regex "/tmp/printer(-[0-9a-zA-Z]+)?" | sort)
-  echo -e "${files[@]}"
-}
-
-function remove_klipper_dir() {
-  [[ ! -d ${KLIPPER_DIR} ]] && return
-
-  status_msg "Removing Klipper directory ..."
-  rm -rf "${KLIPPER_DIR}"
-  ok_msg "Directory removed!"
-}
-
-function remove_klipper_env() {
-  [[ ! -d ${KLIPPY_ENV} ]] && return
-
-  status_msg "Removing klippy-env directory ..."
-  rm -rf "${KLIPPY_ENV}"
-  ok_msg "Directory removed!"
-}
-
-###
-# takes in a string of space separated absolute
-# filepaths and removes those files one after another
-#
-function remove_files() {
-  local files
-  read -r -a files <<< "${@}"
-
-  if (( ${#files[@]} > 0 )); then
-    for file in "${files[@]}"; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_klipper() {
-  remove_klipper_service
-  remove_files "$(find_instance_files "systemd" "klipper.env")"
-  remove_files "$(find_instance_files "logs" "klippy.log.*")"
-  remove_files "$(find_instance_files "comms" "klippy.sock")"
-  remove_files "$(find_instance_files "comms" "klippy.serial")"
-
-  remove_files "$(find_legacy_klipper_logs)"
-  remove_files "$(find_legacy_klipper_uds)"
-  remove_files "$(find_legacy_klipper_printer)"
-
-  remove_klipper_dir
-  remove_klipper_env
-
-  print_confirm "Klipper was successfully removed!" && return
-}
-
-#================================================#
-#================ UPDATE KLIPPER ================#
-#================================================#
-
-###
-# stops klipper, performs a git pull, installs
-# possible new dependencies, then restarts klipper
-#
-function update_klipper() {
-  read_kiauh_ini "${FUNCNAME[0]}"
-
-  local py_ver
-  local custom_repo="${custom_klipper_repo}"
-  local custom_branch="${custom_klipper_repo_branch}"
-
-  py_ver=$(get_klipper_python_ver)
-
-  do_action_service "stop" "klipper"
-
-  if [[ ! -d ${KLIPPER_DIR} ]]; then
-    clone_klipper "${custom_repo}" "${custom_branch}"
-  else
-    backup_before_update "klipper"
-
-    status_msg "Updating Klipper ..."
-    cd "${KLIPPER_DIR}" && git pull
-    ### read PKGLIST and install possible new dependencies
-    install_klipper_packages "${py_ver}"
-    ### install possible new python dependencies
-    "${KLIPPY_ENV}"/bin/pip install -r "${KLIPPER_DIR}/scripts/klippy-requirements.txt"
-  fi
-
-  ok_msg "Update complete!"
-  do_action_service "restart" "klipper"
-}
-
-#================================================#
-#================ KLIPPER STATUS ================#
-#================================================#
-
-function get_klipper_status() {
-  local sf_count status py_ver
-  sf_count="$(klipper_systemd | wc -w)"
-
-  py_ver=$(get_klipper_python_ver)
-
-  ### remove the "SERVICE" entry from the data array if a klipper service is installed
-  local data_arr=(SERVICE "${KLIPPER_DIR}" "${KLIPPY_ENV}")
-  (( sf_count > 0 )) && unset "data_arr[0]"
-
-  ### count+1 for each found data-item from array
-  local filecount=0
-  for data in "${data_arr[@]}"; do
-    [[ -e ${data} ]] && filecount=$(( filecount + 1 ))
-  done
-
-  if (( filecount == ${#data_arr[*]} )); then
-    if (( py_ver == 3 )); then
-      status="Installed: ${sf_count}(py${py_ver})"
-    else
-      status="Installed: ${sf_count}"
-    fi
-  elif (( filecount == 0 )); then
-    status="Not installed!"
-  else
-    status="Incomplete!"
-  fi
-
-  echo "${status}"
-}
-
-function get_local_klipper_commit() {
-  [[ ! -d ${KLIPPER_DIR} || ! -d "${KLIPPER_DIR}/.git" ]] && return
-
-  local commit
-  cd "${KLIPPER_DIR}"
-  commit="$(git describe HEAD --always --tags | cut -d "-" -f 1,2)"
-  echo "${commit}"
-}
-
-function get_remote_klipper_commit() {
-  [[ ! -d ${KLIPPER_DIR} || ! -d "${KLIPPER_DIR}/.git" ]] && return
-
-  local commit
-  local branch
-
-  read_kiauh_ini "${FUNCNAME[0]}"
-  branch="${custom_klipper_repo_branch}"
-  [[ -z ${branch} ]] && branch="master"
-
-  cd "${KLIPPER_DIR}" && git fetch origin -q
-  commit=$(git describe "origin/${branch}" --always --tags | cut -d "-" -f 1,2)
-  echo "${commit}"
-}
-
-function compare_klipper_versions() {
-  local versions local_ver remote_ver
-  local_ver="$(get_local_klipper_commit)"
-  remote_ver="$(get_remote_klipper_commit)"
-
-  if [[ ${local_ver} != "${remote_ver}" ]]; then
-    versions="${yellow}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-    # add klipper to application_updates_available in kiauh.ini
-    add_to_application_updates "klipper"
-  else
-    versions="${green}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-  fi
-
-  echo "${versions}"
-}
-
-#================================================#
-#=================== HELPERS ====================#
-#================================================#
-
-###
-# reads the python version from the klipper virtual environment
-#
-# @output: writes the python major version to STDOUT
-#
-function get_klipper_python_ver() {
-  [[ ! -d ${KLIPPY_ENV} ]] && return
-
-  local version
-  version=$("${KLIPPY_ENV}"/bin/python --version 2>&1 | cut -d" " -f2 | cut -d"." -f1)
-  echo "${version}"
-}
-
-function mask_disrupting_services() {
-  local brltty="false"
-  local brltty_udev="false"
-  local modem_manager="false"
-
-  [[ $(dpkg -s brltty  2>/dev/null | grep "Status") = *\ installed ]] && brltty="true"
-  [[ $(dpkg -s brltty-udev  2>/dev/null | grep "Status") = *\ installed ]] && brltty_udev="true"
-  [[ $(dpkg -s ModemManager  2>/dev/null | grep "Status") = *\ installed ]] && modem_manager="true"
-
-  status_msg "Installed brltty package detected, masking brltty service ..."
-  if [[ ${brltty} == "true" ]]; then
-    sudo systemctl stop brltty
-    sudo systemctl mask brltty
-  fi
-  ok_msg "brltty service masked!"
-
-  status_msg "Installed brltty-udev package detected, masking brltty-udev service ..."
-  if [[ ${brltty_udev} == "true" ]]; then
-    sudo systemctl stop brltty-udev
-    sudo systemctl mask brltty-udev
-  fi
-  ok_msg "brltty-udev service masked!"
-
-  status_msg "Installed ModemManager package detected, masking ModemManager service ..."
-  if [[ ${modem_manager} == "true" ]]; then
-    sudo systemctl stop ModemManager
-    sudo systemctl mask ModemManager
-  fi
-  ok_msg "ModemManager service masked!"
-}
--- a/scripts/klipperscreen.sh
+++ b/scripts/klipperscreen.sh
@@ -1,237 +0,0 @@
-#!/usr/bin/env bash
-
-#=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
-#                                                                       #
-# This file is part of KIAUH - Klipper Installation And Update Helper   #
-# https://github.com/dw-0/kiauh                                         #
-#                                                                       #
-# This file may be distributed under the terms of the GNU GPLv3 license #
-#=======================================================================#
-
-set -e
-
-#===================================================#
-#============== INSTALL KLIPPERSCREEN ==============#
-#===================================================#
-
-function klipperscreen_systemd() {
-  local services
-  services=$(find "${SYSTEMD}" -maxdepth 1 -regextype posix-extended -regex "${SYSTEMD}/KlipperScreen.service")
-  echo "${services}"
-}
-
-function install_klipperscreen() {
-  ### return early if python version check fails
-  if [[ $(python3_check) == "false" ]]; then
-    local error="Versioncheck failed! Python 3.7 or newer required!\n"
-    error="${error} Please upgrade Python."
-    print_error "${error}" && return
-  fi
-
-  ### first, we create a backup of the full klipper_config dir - safety first!
-  backup_config_dir
-
-  ### install KlipperScreen
-  klipperscreen_setup
-
-  ### add klipperscreen to the update manager in moonraker.conf
-  patch_klipperscreen_update_manager
-
-  do_action_service "restart" "KlipperScreen"
-}
-
-function klipperscreen_setup() {
-  local dep=(wget curl unzip dfu-util)
-  dependency_check "${dep[@]}"
-  status_msg "Cloning KlipperScreen from ${KLIPPERSCREEN_REPO} ..."
-
-  # force remove existing KlipperScreen dir
-  [[ -d ${KLIPPERSCREEN_DIR} ]] && rm -rf "${KLIPPERSCREEN_DIR}"
-
-  # clone into fresh KlipperScreen dir
-  cd "${HOME}" || exit 1
-  if ! git clone "${KLIPPERSCREEN_REPO}" "${KLIPPERSCREEN_DIR}"; then
-    print_error "Cloning KlipperScreen from\n ${KLIPPERSCREEN_REPO}\n failed!"
-    exit 1
-  fi
-
-  status_msg "Installing KlipperScreen ..."
-  if "${KLIPPERSCREEN_DIR}"/scripts/KlipperScreen-install.sh; then
-    ok_msg "KlipperScreen successfully installed!"
-  else
-    print_error "KlipperScreen installation failed!"
-    exit 1
-  fi
-}
-
-#===================================================#
-#=============== REMOVE KLIPPERSCREEN ==============#
-#===================================================#
-
-function remove_klipperscreen() {
-  ### remove KlipperScreen dir
-  if [[ -d ${KLIPPERSCREEN_DIR} ]]; then
-    status_msg "Removing KlipperScreen directory ..."
-    rm -rf "${KLIPPERSCREEN_DIR}" && ok_msg "Directory removed!"
-  fi
-
-  ### remove KlipperScreen VENV dir
-  if [[ -d ${KLIPPERSCREEN_ENV} ]]; then
-    status_msg "Removing KlipperScreen VENV directory ..."
-    rm -rf "${KLIPPERSCREEN_ENV}" && ok_msg "Directory removed!"
-  fi
-
-  ### remove KlipperScreen service
-  if [[ -e "${SYSTEMD}/KlipperScreen.service" ]]; then
-    status_msg "Removing KlipperScreen service ..."
-    do_action_service "stop" "KlipperScreen"
-    do_action_service "disable" "KlipperScreen"
-    sudo rm -f "${SYSTEMD}/KlipperScreen.service"
-
-    ###reloading units
-    sudo systemctl daemon-reload
-    sudo systemctl reset-failed
-    ok_msg "KlipperScreen Service removed!"
-  fi
-
-  ### remove KlipperScreen log
-  if [[ -e "/tmp/KlipperScreen.log" ]]; then
-    status_msg "Removing KlipperScreen log file ..."
-    rm -f "/tmp/KlipperScreen.log" && ok_msg "File removed!"
-  fi
-
-  ### remove KlipperScreen log symlink in config dir
-  if [[ -e "${KLIPPER_CONFIG}/KlipperScreen.log" ]]; then
-    status_msg "Removing KlipperScreen log symlink ..."
-    rm -f "${KLIPPER_CONFIG}/KlipperScreen.log" && ok_msg "File removed!"
-  fi
-
-  print_confirm "KlipperScreen successfully removed!"
-}
-
-#===================================================#
-#=============== UPDATE KLIPPERSCREEN ==============#
-#===================================================#
-
-function update_klipperscreen() {
-  local old_md5
-  old_md5=$(md5sum "${KLIPPERSCREEN_DIR}/scripts/KlipperScreen-requirements.txt" | cut -d " " -f1)
-
-  do_action_service "stop" "KlipperScreen"
-  backup_before_update "klipperscreen"
-
-  cd "${KLIPPERSCREEN_DIR}"
-  git pull origin master -q && ok_msg "Fetch successfull!"
-  git checkout -f master && ok_msg "Checkout successfull"
-
-  if [[ $(md5sum "${KLIPPERSCREEN_DIR}/scripts/KlipperScreen-requirements.txt" | cut -d " " -f1) != "${old_md5}" ]]; then
-    status_msg "New dependencies detected..."
-    "${KLIPPERSCREEN_ENV}"/bin/pip install -r "${KLIPPERSCREEN_DIR}/scripts/KlipperScreen-requirements.txt"
-    ok_msg "Dependencies have been installed!"
-  fi
-
-  ok_msg "Update complete!"
-  do_action_service "start" "KlipperScreen"
-}
-
-#===================================================#
-#=============== KLIPPERSCREEN STATUS ==============#
-#===================================================#
-
-function get_klipperscreen_status() {
-  local sf_count status
-  sf_count="$(klipperscreen_systemd | wc -w)"
-
-  ### remove the "SERVICE" entry from the data array if a moonraker service is installed
-  local data_arr=(SERVICE "${KLIPPERSCREEN_DIR}" "${KLIPPERSCREEN_ENV}")
-  (( sf_count > 0 )) && unset "data_arr[0]"
-
-  ### count+1 for each found data-item from array
-  local filecount=0
-  for data in "${data_arr[@]}"; do
-    [[ -e ${data} ]] && filecount=$(( filecount + 1 ))
-  done
-
-  if (( filecount == ${#data_arr[*]} )); then
-    status="Installed!"
-  elif (( filecount == 0 )); then
-    status="Not installed!"
-  else
-    status="Incomplete!"
-  fi
-  echo "${status}"
-}
-
-function get_local_klipperscreen_commit() {
-  [[ ! -d ${KLIPPERSCREEN_DIR} || ! -d "${KLIPPERSCREEN_DIR}/.git" ]] && return
-
-  local commit
-  cd "${KLIPPERSCREEN_DIR}"
-  commit="$(git describe HEAD --always --tags | cut -d "-" -f 1,2)"
-  echo "${commit}"
-}
-
-function get_remote_klipperscreen_commit() {
-  [[ ! -d ${KLIPPERSCREEN_DIR} || ! -d "${KLIPPERSCREEN_DIR}/.git" ]] && return
-
-  local commit
-  cd "${KLIPPERSCREEN_DIR}" && git fetch origin -q
-  commit=$(git describe origin/master --always --tags | cut -d "-" -f 1,2)
-  echo "${commit}"
-}
-
-function compare_klipperscreen_versions() {
-  local versions local_ver remote_ver
-  local_ver="$(get_local_klipperscreen_commit)"
-  remote_ver="$(get_remote_klipperscreen_commit)"
-
-  if [[ ${local_ver} != "${remote_ver}" ]]; then
-    versions="${yellow}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-    # add moonraker to application_updates_available in kiauh.ini
-    add_to_application_updates "klipperscreen"
-  else
-    versions="${green}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-  fi
-
-  echo "${versions}"
-}
-
-#================================================#
-#=================== HELPERS ====================#
-#================================================#
-
-function patch_klipperscreen_update_manager() {
-  local patched="false"
-  local moonraker_configs
-  moonraker_configs=$(find "${KLIPPER_CONFIG}" -type f -name "moonraker.conf" | sort)
-
-  for conf in ${moonraker_configs}; do
-    if ! grep -Eq "^\[update_manager KlipperScreen\]\s*$" "${conf}"; then
-      ### add new line to conf if it doesn't end with one
-      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"
-
-      ### add KlipperScreens update manager section to moonraker.conf
-      status_msg "Adding KlipperScreen to update manager in file:\n       ${conf}"
-      /bin/sh -c "cat >> ${conf}" << MOONRAKER_CONF
-
-[update_manager KlipperScreen]
-type: git_repo
-path: ${HOME}/KlipperScreen
-origin: https://github.com/jordanruthe/KlipperScreen.git
-env: ${HOME}/.KlipperScreen-env/bin/python
-requirements: scripts/KlipperScreen-requirements.txt
-install_script: scripts/KlipperScreen-install.sh
-MOONRAKER_CONF
-
-    fi
-
-    patched="true"
-  done
-
-  if [[ ${patched} == "true" ]]; then
-    do_action_service "restart" "moonraker"
-  fi
-}
--- a/scripts/mainsail.sh
+++ b/scripts/mainsail.sh
@@ -1,690 +0,0 @@
-#!/usr/bin/env bash
-
-#=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
-#                                                                       #
-# This file is part of KIAUH - Klipper Installation And Update Helper   #
-# https://github.com/dw-0/kiauh                                         #
-#                                                                       #
-# This file may be distributed under the terms of the GNU GPLv3 license #
-#=======================================================================#
-
-set -e
-
-#===================================================#
-#================= INSTALL MAINSAIL ================#
-#===================================================#
-
-function install_mainsail() {
-  if [[ -z $(moonraker_systemd) ]]; then
-    local error="Moonraker not installed! It's recommended to install Moonraker first!"
-    print_error "${error}"
-    while true; do
-      local yn
-      read -p "${cyan}###### Proceed to install Mainsail without installing Moonraker? (y/N):${white} " yn
-      case "${yn}" in
-        Y|y|Yes|yes)
-          select_msg "Yes"
-          break;;
-        N|n|No|no|"")
-          select_msg "No"
-          abort_msg "Exiting Mainsail setup ...\n"
-          return;;
-        *)
-          error_msg "Invalid Input!";;
-      esac
-    done
-  fi
-
-  ### checking dependencies
-  local dep=(wget nginx unzip)
-  dependency_check "${dep[@]}"
-  ### detect conflicting Haproxy and Apache2 installations
-  detect_conflicting_packages
-
-  status_msg "Initializing Mainsail installation ..."
-  ### first, we create a backup of the full klipper_config dir - safety first!
-  backup_config_dir
-
-  ### check for other enabled web interfaces
-  unset SET_LISTEN_PORT
-  detect_enabled_sites
-
-  ### check if another site already listens to port 80
-  mainsail_port_check
-
-  ### download mainsail
-  download_mainsail
-
-  ### ask user to install the recommended webinterface macros
-  install_mainsail_macros
-
-  ### create /etc/nginx/conf.d/upstreams.conf
-  set_upstream_nginx_cfg
-  ### create /etc/nginx/sites-available/<interface config>
-  set_nginx_cfg "mainsail"
-  ### nginx on ubuntu 21 and above needs special permissions to access the files
-  set_nginx_permissions
-
-  ### symlink nginx log
-  symlink_webui_nginx_log "mainsail"
-
-  ### add mainsail to the update manager in moonraker.conf
-  patch_mainsail_update_manager
-
-  fetch_webui_ports #WIP
-
-  ### confirm message
-  print_confirm "Mainsail has been set up!"
-}
-
-function install_mainsail_macros() {
-  local yn
-  while true; do
-    echo
-    top_border
-    echo -e "| It is recommended to use special macros in order to   |"
-    echo -e "| have Mainsail fully functional and working.           |"
-    blank_line
-    echo -e "| The recommended macros for Mainsail can be seen here: |"
-    echo -e "| https://github.com/mainsail-crew/mainsail-config      |"
-    blank_line
-    echo -e "| If you already use these macros skip this step.       |"
-    echo -e "| Otherwise you should consider to answer with 'yes' to |"
-    echo -e "| download the recommended macros.                      |"
-    bottom_border
-    read -p "${cyan}###### Download the recommended macros? (Y/n):${white} " yn
-    case "${yn}" in
-      Y|y|Yes|yes|"")
-        select_msg "Yes"
-        download_mainsail_macros
-        break;;
-      N|n|No|no)
-        select_msg "No"
-        break;;
-      *)
-        print_error "Invalid command!";;
-    esac
-  done
-  return
-}
-
-function download_mainsail_macros() {
-  local ms_cfg_repo path configs regex line gcode_dir
-
-  ms_cfg_repo="https://github.com/mainsail-crew/mainsail-config.git"
-  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/printer\.cfg"
-  configs=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
-
-  if [[ -z ${configs} ]]; then
-    print_error "No printer.cfg found! Installation of Macros will be skipped ..."
-    log_error "execution stopped! reason: no printer.cfg found"
-    return
-  fi
-
-  status_msg "Cloning mainsail-config ..."
-  [[ -d "${HOME}/mainsail-config" ]] && rm -rf "${HOME}/mainsail-config"
-  if git clone "${ms_cfg_repo}" "${HOME}/mainsail-config"; then
-    for config in ${configs}; do
-      path=$(echo "${config}" | rev | cut -d"/" -f2- | rev)
-
-      if [[ -e "${path}/mainsail.cfg" && ! -h "${path}/mainsail.cfg" ]]; then
-        warn_msg "Attention! Existing mainsail.cfg detected!"
-        warn_msg "The file will be renamed to 'mainsail.bak.cfg' to be able to continue with the installation."
-        if ! mv "${path}/mainsail.cfg" "${path}/mainsail.bak.cfg"; then
-          error_msg "Renaming mainsail.cfg failed! Aborting installation ..."
-          return
-        fi
-      fi
-
-      if [[ -h "${path}/mainsail.cfg" ]]; then
-        warn_msg "Recreating symlink in ${path} ..."
-        rm -rf "${path}/mainsail.cfg"
-      fi
-
-      if ! ln -sf "${HOME}/mainsail-config/client.cfg" "${path}/mainsail.cfg"; then
-        error_msg "Creating symlink failed! Aborting installation ..."
-        return
-      fi
-
-      if ! grep -Eq "^\[include mainsail.cfg\]$" "${path}/printer.cfg"; then
-        log_info "${path}/printer.cfg"
-        sed -i "1 i [include mainsail.cfg]" "${path}/printer.cfg"
-      fi
-
-      line=$(($(grep -n "\[include mainsail.cfg\]" "${path}/printer.cfg" | tail -1 | cut -d: -f1) + 1))
-      gcode_dir=${path/config/gcodes}
-      if ! grep -Eq "^\[virtual_sdcard\]$" "${path}/printer.cfg"; then
-        log_info "${path}/printer.cfg"
-        sed -i "${line} i \[virtual_sdcard]\npath: ${gcode_dir}\non_error_gcode: CANCEL_PRINT\n" "${path}/printer.cfg"
-      fi
-    done
-  else
-    print_error "Cloning failed! Aborting installation ..."
-    log_error "execution stopped! reason: cloning failed"
-    return
-  fi
-
-  patch_mainsail_config_update_manager
-
-  ok_msg "Done!"
-}
-
-function download_mainsail() {
-  local services
-  local url
-  url=$(get_mainsail_download_url)
-
-  status_msg "Downloading Mainsail from ${url} ..."
-
-  if [[ -d ${MAINSAIL_DIR} ]]; then
-    rm -rf "${MAINSAIL_DIR}"
-  fi
-
-  mkdir "${MAINSAIL_DIR}" && cd "${MAINSAIL_DIR}"
-
-  if wget "${url}"; then
-    ok_msg "Download complete!"
-    status_msg "Extracting archive ..."
-    unzip -q -o ./*.zip && ok_msg "Done!"
-    status_msg "Remove downloaded archive ..."
-    rm -rf ./*.zip && ok_msg "Done!"
-  else
-    print_error "Downloading Mainsail from\n ${url}\n failed!"
-    exit 1
-  fi
-
-  ### check for moonraker multi-instance and if no-instance or multi-instance was found, enable mainsails remoteMode
-  services=$(moonraker_systemd)
-  if [[ ( -z "${services}" ) || ( $(echo "${services}" | wc -w) -gt 1 ) ]]; then
-    enable_mainsail_remotemode
-  fi
-}
-
-#===================================================#
-#================= REMOVE MAINSAIL =================#
-#===================================================#
-
-function remove_mainsail_dir() {
-  [[ ! -d ${MAINSAIL_DIR} ]] && return
-
-  status_msg "Removing Mainsail directory ..."
-  rm -rf "${MAINSAIL_DIR}" && ok_msg "Directory removed!"
-}
-
-function remove_mainsail_nginx_config() {
-  if [[ -e "/etc/nginx/sites-available/mainsail" ]]; then
-    status_msg "Removing Mainsail configuration for Nginx ..."
-    sudo rm "/etc/nginx/sites-available/mainsail" && ok_msg "File removed!"
-  fi
-  if [[ -L "/etc/nginx/sites-enabled/mainsail" ]]; then
-    status_msg "Removing Mainsail Symlink for Nginx ..."
-    sudo rm "/etc/nginx/sites-enabled/mainsail" && ok_msg "File removed!"
-  fi
-}
-
-function remove_mainsail_logs() {
-  local files
-  files=$(find /var/log/nginx -name "mainsail*" 2> /dev/null | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      sudo rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_mainsail_log_symlinks() {
-  local files regex
-
-  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/logs\/mainsail-.*"
-  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" 2> /dev/null | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_legacy_mainsail_log_symlinks() {
-  local files
-  files=$(find "${HOME}/klipper_logs" -name "mainsail*" 2> /dev/null | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_mainsail_config() {
-  if [[ -d "${HOME}/mainsail-config"  ]]; then
-    status_msg "Removing ${HOME}/mainsail-config ..."
-    rm -rf "${HOME}/mainsail-config"
-    ok_msg "${HOME}/mainsail-config removed!"
-    print_confirm "Mainsail-Config successfully removed!"
-  fi
-}
-
-function remove_mainsail() {
-  remove_mainsail_dir
-  remove_mainsail_nginx_config
-  remove_mainsail_logs
-  remove_mainsail_log_symlinks
-  remove_legacy_mainsail_log_symlinks
-
-  ### remove mainsail_port from ~/.kiauh.ini
-  sed -i "/^mainsail_port=/d" "${INI_FILE}"
-
-  print_confirm "Mainsail successfully removed!"
-}
-
-#===================================================#
-#================= UPDATE MAINSAIL =================#
-#===================================================#
-
-function update_mainsail() {
-  backup_before_update "mainsail"
-  status_msg "Updating Mainsail ..."
-  download_mainsail
-  match_nginx_configs
-  symlink_webui_nginx_log "mainsail"
-  print_confirm "Mainsail successfully updated!"
-}
-
-#===================================================#
-#================= MAINSAIL STATUS =================#
-#===================================================#
-
-function get_mainsail_status() {
-  local status
-  local data_arr=("${MAINSAIL_DIR}" "${NGINX_SA}/mainsail" "${NGINX_SE}/mainsail")
-
-  ### count+1 for each found data-item from array
-  local filecount=0
-  for data in "${data_arr[@]}"; do
-    [[ -e ${data} ]] && filecount=$(( filecount + 1 ))
-  done
-
-  if (( filecount == ${#data_arr[*]} )); then
-    status="Installed!"
-  elif (( filecount == 0 )); then
-    status="Not installed!"
-  else
-    status="Incomplete!"
-  fi
-  echo "${status}"
-}
-
-function get_local_mainsail_version() {
-  local versionfile="${MAINSAIL_DIR}/.version"
-  local relinfofile="${MAINSAIL_DIR}/release_info.json"
-  local version
-
-  if [[ -f ${relinfofile} ]]; then
-    version=$(grep -o '"version":"[^"]*' "${relinfofile}" | grep -o '[^"]*$')
-  elif [[ -f ${versionfile} ]]; then
-    version=$(head -n 1 "${versionfile}")
-  fi
-
-  echo "${version}"
-}
-
-function get_remote_mainsail_version() {
-  [[ ! $(dpkg-query -f'${Status}' --show curl 2>/dev/null) = *\ installed ]] && return
-
-  local tags
-  tags=$(curl -s "https://api.github.com/repos/mainsail-crew/mainsail/tags" | grep "name" | cut -d'"' -f4)
-  echo "${tags}" | head -1
-}
-
-function compare_mainsail_versions() {
-  local versions local_ver remote_ver
-  local_ver="$(get_local_mainsail_version)"
-  remote_ver="$(get_remote_mainsail_version)"
-
-  if [[ ${local_ver} != "${remote_ver}" && ${local_ver} != "" ]]; then
-    versions="${yellow}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-    # add moonraker to application_updates_available in kiauh.ini
-    add_to_application_updates "mainsail"
-  else
-    versions="${green}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-  fi
-
-  echo "${versions}"
-}
-
-#================================================#
-#=========== MAINSAIL THEME INSTALLER ===========#
-#================================================#
-
-function print_theme_list() {
-  local i=0 theme_list=${1}
-
-  while IFS="," read -r col1 col2 col3 col4; do
-    if [[ ${col1} != "name" ]]; then
-      printf "| ${i}) %-51s|\n" "[${col1}]"
-    fi
-    i=$(( i + 1 ))
-  done <<< "${theme_list}"
-}
-
-function ms_theme_installer_menu() {
-  local theme_list theme_author theme_repo theme_name theme_note theme_url
-  local theme_csv_url="https://raw.githubusercontent.com/mainsail-crew/gb-docs/main/_data/themes.csv"
-  theme_list=$(curl -s -L "${theme_csv_url}")
-
-  top_border
-  echo -e "|     ${red}~~~~~~~~ [ Mainsail Theme Installer ] ~~~~~~~${white}     |"
-  hr
-  echo -e "| ${cyan}A preview of each Mainsail theme can be found here:${white}   |"
-  echo -e "| https://docs.mainsail.xyz/theming/themes              |"
-  blank_line
-  echo -e "| ${yellow}Important note:${white}                                       |"
-  echo -e "| Installing a theme from this menu will overwrite an   |"
-  echo -e "| already installed theme or modified custom.css file!  |"
-  hr
-  print_theme_list "${theme_list}"
-  echo -e "|                                                       |"
-  echo -e "| R) [Remove Theme]                                     |"
-  back_footer
-
-  while IFS="," read -r col1 col2 col3 col4; do
-    theme_name+=("${col1}")
-    theme_note+=("${col2}")
-    theme_author+=("${col3}")
-    theme_repo+=("${col4}")
-  done <<< "${theme_list}"
-
-  local option
-  while true; do
-    read -p "${cyan}Install theme:${white} " option
-    if (( option > 0 &&  option < ${#theme_name[@]} )); then
-      theme_url="https://github.com/${theme_author[${option}]}/${theme_repo[${option}]}"
-      ms_theme_install "${theme_url}" "${theme_name[${option}]}" "${theme_note[${option}]}"
-      break
-    elif [[ ${option} == "R" || ${option} == "r" ]]; then
-      ms_theme_delete
-      break
-    elif [[ ${option} == "B" || ${option} == "b" ]]; then
-      advanced_menu
-      break
-    else
-      error_msg "Invalid command!"
-    fi
-  done
-  ms_theme_installer_menu
-}
-
-function ms_theme_install() {
-  read_kiauh_ini "${FUNCNAME[0]}"
-
-  local theme_url
-  local theme_name
-  local theme_note
-  theme_url=${1}
-  theme_name=${2}
-  theme_note=${3}
-
-  local folder_arr
-  local folder_names="${multi_instance_names}"
-  local target_folders=()
-
-  IFS=',' read -r -a folder_arr <<< "${folder_names}"
-
-  ### build theme target folder array
-  if (( ${#folder_arr[@]} > 1 )); then
-    for folder in "${folder_arr[@]}"; do
-      ### instance names/identifier of only numbers need to be prefixed with 'printer_'
-      if [[ ${folder} =~ ^[0-9]+$ ]]; then
-        target_folders+=("${HOME}/printer_${folder}_data/config")
-      else
-        target_folders+=("${HOME}/${folder}_data/config")
-      fi
-    done
-  else
-    target_folders+=("${HOME}/printer_data/config")
-  fi
-
-  if (( ${#target_folders[@]} > 1 )); then
-    top_border
-    echo -e "| Please select the printer you want to apply the theme |"
-    echo -e "| installation to:                                      |"
-    for (( i=0; i < ${#target_folders[@]}; i++ )); do
-      folder=$(echo "${target_folders[${i}]}" | rev | cut -d "/" -f2 | cut -d"_" -f2- | rev)
-      printf "|${cyan}%-55s${white}|\n" " ${i}) ${folder}"
-    done
-    bottom_border
-
-    local target re="^[0-9]*$"
-    while true; do
-      read -p "${cyan}###### Select printer:${white} " target
-      ### break while loop if input is valid, else display error
-      [[ ${target} =~ ${re} && ${target} -lt ${#target_folders[@]} ]] && break
-      error_msg "Invalid command!"
-    done
-  fi
-
-  [[ -d "${target_folders[${target}]}/.theme" ]] && rm -rf "${target_folders[${target}]}/.theme"
-
-  status_msg "Installing '${theme_name}' to ${target_folders[${target}]} ..."
-  cd "${target_folders[${target}]}"
-
-  if git clone "${theme_url}" ".theme"; then
-    ok_msg "Theme installation complete!"
-    [[ -n ${theme_note} ]] && echo "${yellow}###### Theme Info: ${theme_note}${white}"
-    ok_msg "Please remember to delete your browser cache!\n"
-  else
-    error_msg "Theme installation failed!\n"
-  fi
-}
-
-function ms_theme_delete() {
-  local regex theme_folders target_folders=()
-
-  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/\.theme"
-  theme_folders=$(find "${HOME}" -maxdepth 3 -type d -regextype posix-extended -regex "${regex}" | sort)
-#  theme_folders=$(find "${KLIPPER_CONFIG}" -mindepth 1 -type d -name ".theme" | sort)
-
-  ### build target folder array
-  for folder in ${theme_folders}; do
-    target_folders+=("${folder}")
-  done
-
-  if (( ${#target_folders[@]} == 0 )); then
-    status_msg "No Themes installed!\n"
-    return
-  elif (( ${#target_folders[@]} > 1 )); then
-    top_border
-    echo -e "| Please select the printer you want to remove the      |"
-    echo -e "| theme installation from.                              |"
-    for (( i=0; i < ${#target_folders[@]}; i++ )); do
-      folder=$(echo "${target_folders[${i}]}" | rev | cut -d "/" -f2 | rev)
-      printf "|${cyan}%-55s${white}|\n" " ${i}) ${folder}"
-    done
-    bottom_border
-
-    local target re="^[0-9]*$"
-    while true; do
-      read -p "${cyan}###### Select printer:${white} " target
-      ### break while loop if input is valid, else display error
-      [[ ${target} =~ ${re} && ${target} -lt ${#target_folders[@]} ]] && break
-      error_msg "Invalid command!"
-    done
-  fi
-
-  status_msg "Removing ${target_folders[${target}]} ..."
-  rm -rf "${target_folders[${target}]}" && ok_msg "Theme removed!\n"
-
-  return
-}
-
-#================================================#
-#=================== HELPERS ====================#
-#================================================#
-
-function get_mainsail_download_url() {
-  local releases_by_tag tags tag unstable_url url
-
-  ### latest stable download url
-  url="https://github.com/mainsail-crew/mainsail/releases/latest/download/mainsail.zip"
-
-  read_kiauh_ini "${FUNCNAME[0]}"
-  if [[ ${mainsail_install_unstable} == "true" ]]; then
-    releases_by_tag="https://api.github.com/repos/mainsail-crew/mainsail/tags"
-    tags=$(curl -s "${releases_by_tag}" | grep "name" | cut -d'"' -f4)
-    tag=$(echo "${tags}" | head -1)
-
-    ### latest unstable download url including pre-releases (alpha, beta, rc)
-    unstable_url="https://github.com/mainsail-crew/mainsail/releases/download/${tag}/mainsail.zip"
-
-    if [[ ${unstable_url} == *"download//"* ]]; then
-      warn_msg "Download URL broken! Falling back to URL of latest stable release!"
-    else
-      url=${unstable_url}
-    fi
-  fi
-
-  echo "${url}"
-}
-
-function mainsail_port_check() {
-  if [[ ${MAINSAIL_ENABLED} == "false" ]]; then
-
-    if [[ ${SITE_ENABLED} == "true" ]]; then
-      status_msg "Detected other enabled interfaces:"
-
-      [[ ${FLUIDD_ENABLED} == "true" ]] && \
-      echo -e "   ${cyan}● Fluidd - Port: ${FLUIDD_PORT}${white}"
-
-      if [[ ${FLUIDD_PORT} == "80" ]]; then
-        PORT_80_BLOCKED="true"
-        select_mainsail_port
-      fi
-    else
-      DEFAULT_PORT=$(grep listen "${KIAUH_SRCDIR}/resources/mainsail" | head -1 | sed 's/^\s*//' | cut -d" " -f2 | cut -d";" -f1)
-      SET_LISTEN_PORT=${DEFAULT_PORT}
-    fi
-    SET_NGINX_CFG="true"
-
-  else
-    SET_NGINX_CFG="false"
-  fi
-}
-
-function select_mainsail_port() {
-  if [[ ${PORT_80_BLOCKED} == "true" ]]; then
-    echo
-    top_border
-    echo -e "|                    ${red}!!!WARNING!!!${white}                      |"
-    echo -e "| ${red}You need to choose a different port for Mainsail!${white}     |"
-    echo -e "| ${red}The following web interface is listening at port 80:${white}  |"
-    blank_line
-    [[ ${FLUIDD_PORT} == "80" ]] && echo "|  ● Fluidd                                             |"
-    blank_line
-    echo -e "| Make sure you don't choose a port which was already   |"
-    echo -e "| assigned to another webinterface!                     |"
-    blank_line
-    echo -e "| Be aware: there is ${red}NO${white} sanity check for the following  |"
-    echo -e "| input. So make sure to choose a valid port!           |"
-    bottom_border
-
-    local new_port re="^[0-9]+$"
-    while true; do
-      read -p "${cyan}Please enter a new Port:${white} " new_port
-      if [[ ${new_port} =~ ${re} && ${new_port} != "${FLUIDD_PORT}" ]]; then
-        select_msg "Setting port ${new_port} for Mainsail!"
-        SET_LISTEN_PORT=${new_port}
-        break
-      else
-        if [[ ! ${new_port} =~ ${re}  ]]; then
-          error_msg "Invalid input!"
-        else
-          error_msg "Port already taken! Select a different one!"
-        fi
-      fi
-    done
-  fi
-}
-
-function enable_mainsail_remotemode() {
-  [[ ! -f "${MAINSAIL_DIR}/config.json" ]] && return
-
-  status_msg "Setting instance storage location to 'browser' ..."
-  sed -i 's|"instancesDB": "moonraker"|"instancesDB": "browser"|' "${MAINSAIL_DIR}/config.json"
-  ok_msg "Done!"
-}
-
-function patch_mainsail_update_manager() {
-  local patched moonraker_configs regex
-  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
-  moonraker_configs=$(find "${HOME}" -maxdepth 3 -type f -regextype posix-extended -regex "${regex}" | sort)
-
-  patched="false"
-  for conf in ${moonraker_configs}; do
-    if ! grep -Eq "^\[update_manager mainsail\]\s*$" "${conf}"; then
-      ### add new line to conf if it doesn't end with one
-      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"
-
-      ### add Mainsails update manager section to moonraker.conf
-      status_msg "Adding Mainsail to update manager in file:\n       ${conf}"
-      /bin/sh -c "cat >> ${conf}" << MOONRAKER_CONF
-
-[update_manager mainsail]
-type: web
-channel: stable
-repo: mainsail-crew/mainsail
-path: ~/mainsail
-MOONRAKER_CONF
-
-    fi
-
-    patched="true"
-  done
-
-  if [[ ${patched} == "true" ]]; then
-    do_action_service "restart" "moonraker"
-  fi
-}
-
-function patch_mainsail_config_update_manager() {
-  local patched moonraker_configs regex
-  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
-  moonraker_configs=$(find "${HOME}" -maxdepth 3 -type f -regextype posix-extended -regex "${regex}" | sort)
-
-  patched="false"
-  for conf in ${moonraker_configs}; do
-    if ! grep -Eq "^\[update_manager mainsail-config\]\s*$" "${conf}"; then
-      ### add new line to conf if it doesn't end with one
-      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"
-
-      ### add Mainsails update manager section to moonraker.conf
-      status_msg "Adding Mainsail-Config to update manager in file:\n       ${conf}"
-      /bin/sh -c "cat >> ${conf}" << MOONRAKER_CONF
-
-[update_manager mainsail-config]
-type: git_repo
-primary_branch: master
-path: ~/mainsail-config
-origin: https://github.com/mainsail-crew/mainsail-config.git
-managed_services: klipper
-MOONRAKER_CONF
-
-    fi
-
-    patched="true"
-  done
-
-  if [[ ${patched} == "true" ]]; then
-    do_action_service "restart" "moonraker"
-  fi
-}
--- a/scripts/mjpg-streamer.sh
+++ b/scripts/mjpg-streamer.sh
@@ -1,193 +0,0 @@
-#!/usr/bin/env bash
-
-#=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
-#                                                                       #
-# This file is part of KIAUH - Klipper Installation And Update Helper   #
-# https://github.com/dw-0/kiauh                                         #
-#                                                                       #
-# This file may be distributed under the terms of the GNU GPLv3 license #
-#=======================================================================#
-
-set -e
-
-#=================================================#
-#============= INSTALL MJPG-STREAMER =============#
-#=================================================#
-
-function install_mjpg-streamer() {
-  local webcamd="${KIAUH_SRCDIR}/resources/mjpg-streamer/webcamd"
-  local webcam_txt="${KIAUH_SRCDIR}/resources/mjpg-streamer/webcam.txt"
-  local service="${KIAUH_SRCDIR}/resources/mjpg-streamer/webcamd.service"
-  local repo="https://github.com/jacksonliam/mjpg-streamer.git"
-
-  ### return early if webcamd.service already exists
-  if [[ -f "${SYSTEMD}/webcamd.service" ]]; then
-    print_error "Looks like MJPG-streamer is already installed!\n Please remove it first before you try to re-install it!"
-    return
-  fi
-
-  status_msg "Initializing MJPG-Streamer installation ..."
-
-  ### check and install dependencies if missing
-  local dep=(git cmake build-essential imagemagick libv4l-dev ffmpeg)
-  if apt-cache search libjpeg62-turbo-dev | grep -Eq "^libjpeg62-turbo-dev "; then
-    dep+=(libjpeg62-turbo-dev)
-  elif apt-cache search libjpeg8-dev | grep -Eq "^libjpeg8-dev "; then
-    dep+=(libjpeg8-dev)
-  fi
-
-  dependency_check "${dep[@]}"
-
-  ### step 1: clone mjpg-streamer
-  status_msg "Cloning MJPG-Streamer from ${repo} ..."
-  [[ -d "${HOME}/mjpg-streamer" ]] && rm -rf "${HOME}/mjpg-streamer"
-
-  cd "${HOME}" || exit 1
-  if ! git clone "${repo}" "${HOME}/mjpg-streamer"; then
-    print_error "Cloning MJPG-Streamer from\n ${repo}\n failed!"
-    exit 1
-  fi
-  ok_msg "Cloning complete!"
-
-  ### step 2: compiling mjpg-streamer
-  status_msg "Compiling MJPG-Streamer ..."
-  cd "${HOME}/mjpg-streamer/mjpg-streamer-experimental"
-  if ! make; then
-    print_error "Compiling MJPG-Streamer failed!"
-    exit 1
-  fi
-  ok_msg "Compiling complete!"
-
-  #step 3: install mjpg-streamer
-  status_msg "Installing MJPG-Streamer ..."
-  cd "${HOME}/mjpg-streamer" && mv mjpg-streamer-experimental/* .
-  mkdir www-mjpgstreamer
-
-  cat <<EOT >> ./www-mjpgstreamer/index.html
-<html>
-<head><title>mjpg_streamer test page</title></head>
-<body>
-<h1>Snapshot</h1>
-<p>Refresh the page to refresh the snapshot</p>
-<img src="./?action=snapshot" alt="Snapshot">
-<h1>Stream</h1>
-<img src="./?action=stream" alt="Stream">
-</body>
-</html>
-EOT
-
-  sudo cp "${webcamd}" "/usr/local/bin/webcamd"
-  sudo sed -i "/^config_dir=/ s|=.*|=${KLIPPER_CONFIG}|" /usr/local/bin/webcamd
-  sudo sed -i "/MJPGSTREAMER_HOME/ s/pi/${USER}/" /usr/local/bin/webcamd
-  sudo chmod +x /usr/local/bin/webcamd
-
-  ### step 4: create webcam.txt config file
-  [[ ! -d ${KLIPPER_CONFIG} ]] && mkdir -p "${KLIPPER_CONFIG}"
-  if [[ ! -f "${KLIPPER_CONFIG}/webcam.txt" ]]; then
-    status_msg "Creating webcam.txt config file ..."
-    cp "${webcam_txt}" "${KLIPPER_CONFIG}/webcam.txt"
-    ok_msg "Done!"
-  fi
-
-  ### step 5: create systemd service
-  status_msg "Creating MJPG-Streamer service ..."
-  sudo cp "${service}" "${SYSTEMD}/webcamd.service"
-  sudo sed -i "s|%USER%|${USER}|" "${SYSTEMD}/webcamd.service"
-  ok_msg "MJPG-Streamer service created!"
-
-  ### step 6: enabling and starting mjpg-streamer service
-  status_msg "Starting MJPG-Streamer service, please wait ..."
-  sudo systemctl enable webcamd.service
-  if sudo systemctl start webcamd.service; then
-    ok_msg "MJPG-Streamer service started!"
-  else
-    status_msg "MJPG-Streamer service couldn't be started! No webcam connected?\n###### You need to manually restart the service once your webcam is set up correctly."
-  fi
-
-  ### step 6.1: create webcamd.log symlink
-  [[ ! -d ${KLIPPER_LOGS} ]] && mkdir -p "${KLIPPER_LOGS}"
-  if [[ -f "/var/log/webcamd.log" && ! -L "${KLIPPER_LOGS}/webcamd.log" ]]; then
-    ln -s "/var/log/webcamd.log" "${KLIPPER_LOGS}/webcamd.log"
-  fi
-
-  ### step 6.2: add webcamd.log logrotate
-  if [[ ! -f "/etc/logrotate.d/webcamd"  ]]; then
-    status_msg "Create logrotate rule ..."
-    sudo /bin/sh -c "cat > /etc/logrotate.d/webcamd" << EOF
-/var/log/webcamd.log
-{
-    rotate 2
-    weekly
-    maxsize 32M
-    missingok
-    notifempty
-    compress
-    delaycompress
-    sharedscripts
-}
-EOF
-     ok_msg "Done!"
-  fi
-
-  ### step 7: check if user is in group "video"
-  local usergroup_changed="false"
-  if ! groups "${USER}" | grep -q "video"; then
-    status_msg "Adding user '${USER}' to group 'video' ..."
-    sudo usermod -a -G video "${USER}" && ok_msg "Done!"
-    usergroup_changed="true"
-  fi
-
-  ### confirm message
-  local confirm_msg="MJPG-Streamer has been set up!"
-  if [[ ${usergroup_changed} == "true" ]]; then
-    confirm_msg="${confirm_msg}\n ${yellow}INFO: Your User was added to a new group!${green}"
-    confirm_msg="${confirm_msg}\n ${yellow}You need to relog/restart for the group to be applied!${green}"
-  fi
-
-  print_confirm "${confirm_msg}"
-
-  ### print webcam ip adress/url
-  local ip
-  ip=$(hostname -I | cut -d" " -f1)
-  local cam_url="http://${ip}:8080/?action=stream"
-  local cam_url_alt="http://${ip}/webcam/?action=stream"
-  echo -e " ${cyan}● Webcam URL:${white} ${cam_url}"
-  echo -e " ${cyan}● Webcam URL:${white} ${cam_url_alt}"
-  echo
-}
-
-#=================================================#
-#============== REMOVE MJPG-STREAMER =============#
-#=================================================#
-
-function remove_mjpg-streamer() {
-  ### remove MJPG-Streamer service
-  if [[ -e "${SYSTEMD}/webcamd.service" ]]; then
-    status_msg "Removing MJPG-Streamer service ..."
-    sudo systemctl stop webcamd && sudo systemctl disable webcamd
-    sudo rm -f "${SYSTEMD}/webcamd.service"
-    ###reloading units
-    sudo systemctl daemon-reload
-    sudo systemctl reset-failed
-    ok_msg "MJPG-Streamer Service removed!"
-  fi
-
-  ### remove webcamd from /usr/local/bin
-  if [[ -e "/usr/local/bin/webcamd" ]]; then
-    sudo rm -f "/usr/local/bin/webcamd"
-  fi
-
-  ### remove MJPG-Streamer directory
-  if [[ -d "${HOME}/mjpg-streamer" ]]; then
-    status_msg "Removing MJPG-Streamer directory ..."
-    rm -rf "${HOME}/mjpg-streamer"
-    ok_msg "MJPG-Streamer directory removed!"
-  fi
-
-  ### remove webcamd log and symlink
-  [[ -f "/var/log/webcamd.log" ]] && sudo rm -f "/var/log/webcamd.log"
-  [[ -L "${KLIPPER_LOGS}/webcamd.log" ]] && rm -f "${KLIPPER_LOGS}/webcamd.log"
-
-  print_confirm "MJPG-Streamer successfully removed!"
-}
--- a/scripts/mobileraker.sh
+++ b/scripts/mobileraker.sh
@@ -1,247 +0,0 @@
-#!/usr/bin/env bash
-
-#=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
-#                                                                       #
-# This file is part of KIAUH - Klipper Installation And Update Helper   #
-# https://github.com/dw-0/kiauh                                         #
-#                                                                       #
-# This file may be distributed under the terms of the GNU GPLv3 license #
-#=======================================================================#
-
-#
-# This file is written and maintained by Patrick Schmidt author of Mobileraker
-# It is based of the kliperscreen.sh install script!
-
-
-set -e
-
-#===================================================#
-#========== INSTALL MOBILERAKER COMPANION ==========#
-#===================================================#
-
-function mobileraker_systemd() {
-  local services
-  services=$(find "${SYSTEMD}" -maxdepth 1 -regextype posix-extended -regex "${SYSTEMD}/mobileraker.service")
-  echo "${services}"
-}
-
-function install_mobileraker() {
-  ### return early if python version check fails
-  if [[ $(python3_check) == "false" ]]; then
-    local error="Versioncheck failed! Python 3.7 or newer required!\n"
-    error="${error} Please upgrade Python."
-    print_error "${error}" && return
-  fi
-
-  ### first, we create a backup of the full klipper_config dir - safety first!
-  backup_config_dir
-
-  ### install Mobileraker's Companion
-  mobileraker_setup
-
-  ### add Mobileraker's Companion to the update manager in moonraker.conf
-  patch_mobileraker_update_manager
-
-  do_action_service "restart" "mobileraker"
-}
-
-function mobileraker_setup() {
-  local dep=(wget curl unzip dfu-util)
-  dependency_check "${dep[@]}"
-  status_msg "Cloning Mobileraker's companion from ${MOBILERAKER_REPO} ..."
-
-  # force remove existing Mobileraker's companion dir
-  [[ -d ${MOBILERAKER_DIR} ]] && rm -rf "${MOBILERAKER_DIR}"
-
-  # clone into fresh Mobileraker's companion dir
-  cd "${HOME}" || exit 1
-  if ! git clone "${MOBILERAKER_REPO}" "${MOBILERAKER_DIR}"; then
-    print_error "Cloning mobileraker's companion from\n ${MOBILERAKER_REPO}\n failed!"
-    exit 1
-  fi
-
-  status_msg "Starting installer of Mobileraker's companion ..."
-  if "${MOBILERAKER_DIR}"/scripts/install.sh; then
-    ok_msg "Mobileraker's companion successfully installed!"
-  else
-    print_error "Mobileraker's companion installation failed!"
-    exit 1
-  fi
-}
-
-#===================================================#
-#=========== REMOVE MOBILERAKER COMPANION ==========#
-#===================================================#
-
-function remove_mobileraker() {
-  ### remove Mobileraker's companion dir
-  if [[ -d ${MOBILERAKER_DIR} ]]; then
-    status_msg "Removing Mobileraker's companion directory ..."
-    rm -rf "${MOBILERAKER_DIR}" && ok_msg "Directory removed!"
-  fi
-
-  ### remove Mobileraker's companion VENV dir
-  if [[ -d ${MOBILERAKER_ENV} ]]; then
-    status_msg "Removing Mobileraker's companion VENV directory ..."
-    rm -rf "${MOBILERAKER_ENV}" && ok_msg "Directory removed!"
-  fi
-
-  ### remove Mobileraker's companion service
-  if [[ -e "${SYSTEMD}/mobileraker.service" ]]; then
-    status_msg "Removing mobileraker service ..."
-    do_action_service "stop" "mobileraker"
-    do_action_service "disable" "mobileraker"
-    sudo rm -f "${SYSTEMD}/mobileraker.service"
-
-    ###reloading units
-    sudo systemctl daemon-reload
-    sudo systemctl reset-failed
-    ok_msg "Mobileraker's companion Service removed!"
-  fi
-
-
-  remove_mobileraker_logs
-
-  print_confirm "Mobileraker's companion successfully removed!"
-}
-
-function remove_mobileraker_logs() {
-  local files regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/logs\/mobileraker\.log.*"
-  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-#===================================================#
-#=========== UPDATE MOBILERAKER COMPANION ==========#
-#===================================================#
-
-function update_mobileraker() {
-  local old_md5
-  old_md5=$(md5sum "${MOBILERAKER_DIR}/scripts/mobileraker-requirements.txt" | cut -d " " -f1)
-
-  do_action_service "stop" "mobileraker"
-  cd "${MOBILERAKER_DIR}"
-  git pull origin main -q && ok_msg "Fetch successfull!"
-  git checkout -f main && ok_msg "Checkout successfull"
-
-  if [[ $(md5sum "${MOBILERAKER_DIR}/scripts/mobileraker-requirements.txt" | cut -d " " -f1) != "${old_md5}" ]]; then
-    status_msg "New dependencies detected..."
-    "${MOBILERAKER_ENV}"/bin/pip install -r "${MOBILERAKER_DIR}/scripts/mobileraker-requirements.txt"
-    ok_msg "Dependencies have been installed!"
-  fi
-
-  ok_msg "Update complete!"
-  do_action_service "start" "mobileraker"
-}
-
-#===================================================#
-#=========== MOBILERAKER COMPANION STATUS ==========#
-#===================================================#
-
-function get_mobileraker_status() {
-  local sf_count status
-  sf_count="$(mobileraker_systemd | wc -w)"
-
-  ### remove the "SERVICE" entry from the data array if a moonraker service is installed
-  local data_arr=(SERVICE "${MOBILERAKER_DIR}" "${MOBILERAKER_ENV}")
-  (( sf_count > 0 )) && unset "data_arr[0]"
-
-  ### count+1 for each found data-item from array
-  local filecount=0
-  for data in "${data_arr[@]}"; do
-    [[ -e ${data} ]] && filecount=$(( filecount + 1 ))
-  done
-
-  if (( filecount == ${#data_arr[*]} )); then
-    status="Installed!"
-  elif (( filecount == 0 )); then
-    status="Not installed!"
-  else
-    status="Incomplete!"
-  fi
-  echo "${status}"
-}
-
-function get_local_mobileraker_commit() {
-  [[ ! -d ${MOBILERAKER_DIR} || ! -d "${MOBILERAKER_DIR}/.git" ]] && return
-
-  local commit
-  cd "${MOBILERAKER_DIR}"
-  commit="$(git describe HEAD --always --tags | cut -d "-" -f 1,2)"
-  echo "${commit}"
-}
-
-function get_remote_mobileraker_commit() {
-  [[ ! -d ${MOBILERAKER_DIR} || ! -d "${MOBILERAKER_DIR}/.git" ]] && return
-
-  local commit
-  cd "${MOBILERAKER_DIR}" && git fetch origin -q
-  commit=$(git describe origin/main --always --tags | cut -d "-" -f 1,2)
-  echo "${commit}"
-}
-
-function compare_mobileraker_versions() {
-  local versions local_ver remote_ver
-  local_ver="$(get_local_mobileraker_commit)"
-  remote_ver="$(get_remote_mobileraker_commit)"
-
-  if [[ ${local_ver} != "${remote_ver}" ]]; then
-    versions="${yellow}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-    # add moonraker to application_updates_available in kiauh.ini
-    add_to_application_updates "mobileraker"
-  else
-    versions="${green}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-  fi
-
-  echo "${versions}"
-}
-
-#================================================#
-#=================== HELPERS ====================#
-#================================================#
-
-function patch_mobileraker_update_manager() {
-  local patched moonraker_configs regex
-  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
-  moonraker_configs=$(find "${HOME}" -maxdepth 3 -type f -regextype posix-extended -regex "${regex}" | sort)
-
-  patched="false"
-  for conf in ${moonraker_configs}; do
-    if ! grep -Eq "^\[update_manager mobileraker\]\s*$" "${conf}"; then
-      ### add new line to conf if it doesn't end with one
-      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"
-
-      ### add Mobileraker's Companion update manager section to moonraker.conf
-      status_msg "Adding Mobileraker's Companion to update manager in file:\n       ${conf}"
-      /bin/sh -c "cat >> ${conf}" << MOONRAKER_CONF
-
-[update_manager mobileraker]
-type: git_repo
-path: ${HOME}/mobileraker_companion
-origin: https://github.com/Clon1998/mobileraker_companion.git
-primary_branch:main
-managed_services: mobileraker
-env: ${HOME}/mobileraker-env/bin/python
-requirements: scripts/mobileraker-requirements.txt
-install_script: scripts/install.sh
-MOONRAKER_CONF
-
-    fi
-
-    patched="true"
-  done
-
-  if [[ ${patched} == "true" ]]; then
-    do_action_service "restart" "moonraker"
-  fi
-}
--- a/scripts/moonraker-telegram-bot.sh
+++ b/scripts/moonraker-telegram-bot.sh
@@ -1,542 +0,0 @@
-#!/usr/bin/env bash
-
-#=======================================================================#
-# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
-#                                                                       #
-# This file is part of KIAUH - Klipper Installation And Update Helper   #
-# https://github.com/dw-0/kiauh                                         #
-#                                                                       #
-# This file may be distributed under the terms of the GNU GPLv3 license #
-#=======================================================================#
-
-set -e
-
-#===================================================#
-#========== INSTALL MOONRAKERTELEGRAMBOT ===========#
-#===================================================#
-
-function telegram_bot_systemd() {
-  local services
-  services=$(find "${SYSTEMD}" -maxdepth 1 -regextype posix-extended -regex "${SYSTEMD}/moonraker-telegram-bot(-[0-9a-zA-Z]+)?.service" | sort)
-  echo "${services}"
-}
-
-function telegram_bot_setup_dialog() {
-  ### return early if moonraker is not installed
-  local moonraker_services
-  moonraker_services=$(moonraker_systemd)
-
-  if [[ -z ${moonraker_services} ]]; then
-    local error="Moonraker not installed! Please install Moonraker first!"
-    print_error "${error}" && return
-  fi
-
-  status_msg "Initializing Telegram Bot installation ..."
-  ### first, we create a backup of the full klipper_config dir - safety first!
-  backup_config_dir
-
-  local moonraker_count user_input=() moonraker_names=()
-  moonraker_count=$(echo "${moonraker_services}" | wc -w )
-  for service in ${moonraker_services}; do
-    moonraker_names+=( "$(get_instance_name "${service}")" )
-  done
-
-  local telegram_bot_count
-  if (( moonraker_count == 1 )); then
-    ok_msg "Moonraker installation found!\n"
-    telegram_bot_count=1
-  elif (( moonraker_count > 1 )); then
-    top_border
-    printf "|${green}%-55s${white}|\n" " ${moonraker_count} Moonraker instances found!"
-    for name in "${moonraker_names[@]}"; do
-      printf "|${cyan}%-57s${white}|\n" " ● ${name}"
-    done
-    blank_line
-    echo -e "| The setup will apply the same names to Telegram Bot!  |"
-    blank_line
-    echo -e "| Please select the number of Telegram Bot instances to |"
-    echo -e "| install. Usually one Telegram Bot instance per        |"
-    echo -e "| Moonraker instance is required, but you may not       |"
-    echo -e "| install more Telegram Bot instances than available    |"
-    echo -e "| Moonraker instances.                                  |"
-    bottom_border
-
-    ### ask for amount of instances
-    local re="^[1-9][0-9]*$"
-    while [[ ! ${telegram_bot_count} =~ ${re} || ${telegram_bot_count} -gt ${moonraker_count} ]]; do
-      read -p "${cyan}###### Number of Telegram Bot instances to set up:${white} " -i "${moonraker_count}" -e telegram_bot_count
-      ### break if input is valid
-      [[ ${telegram_bot_count} =~ ${re} && ${telegram_bot_count} -le ${moonraker_count} ]] && break
-      ### conditional error messages
-      [[ ! ${telegram_bot_count} =~ ${re} ]] && error_msg "Input not a number"
-      (( telegram_bot_count > moonraker_count )) && error_msg "Number of Telegram Bot instances larger than existing Moonraker instances"
-    done && select_msg "${telegram_bot_count}"
-  else
-    log_error "Internal error. moonraker_count of '${moonraker_count}' not equal or grather than one!"
-    return 1
-  fi
-
-  user_input+=("${telegram_bot_count}")
-
-  ### confirm instance amount
-  local yn
-  while true; do
-    (( telegram_bot_count == 1 )) && local question="Install Telegram Bot?"
-    (( telegram_bot_count > 1 )) && local question="Install ${telegram_bot_count} Telegram Bot instances?"
-    read -p "${cyan}###### ${question} (Y/n):${white} " yn
-    case "${yn}" in
-      Y|y|Yes|yes|"")
-        select_msg "Yes"
-        break;;
-      N|n|No|no)
-        select_msg "No"
-        abort_msg "Exiting Telegram Bot setup ...\n"
-        return;;
-      *)
-        error_msg "Invalid Input!";;
-    esac
-  done
-
-  ### write existing klipper names into user_input array to use them as names for moonraker
-  if (( moonraker_count > 1 )); then
-    for name in "${moonraker_names[@]}"; do
-      user_input+=("${name}")
-    done
-  fi
-
-  (( telegram_bot_count > 1 )) && status_msg "Installing ${telegram_bot_count} Telegram Bot instances ..."
-  (( telegram_bot_count == 1 )) && status_msg "Installing Telegram Bot ..."
-  telegram_bot_setup "${user_input[@]}"
-}
-
-function install_telegram_bot_dependencies() {
-  local packages log_name="Telegram Bot"
-  local install_script="${TELEGRAM_BOT_DIR}/scripts/install.sh"
-
-  ### read PKGLIST from official install-script
-  status_msg "Reading dependencies..."
-  # shellcheck disable=SC2016
-  packages="$(grep "PKGLIST=" "${install_script}" | cut -d'"' -f2 | sed 's/\${PKGLIST}//g' | tr -d '\n')"
-
-  echo "${cyan}${packages}${white}" | tr '[:space:]' '\n'
-  read -r -a packages <<< "${packages}"
-
-  ### Update system package lists if stale
-  update_system_package_lists
-
-  ### Install required packages
-  install_system_packages "${log_name}" "packages[@]"
-}
-
-function create_telegram_bot_virtualenv() {
-  status_msg "Installing python virtual environment..."
-  ### always create a clean virtualenv
-  [[ -d ${TELEGRAM_BOT_ENV} ]] && rm -rf "${TELEGRAM_BOT_ENV}"
-  if virtualenv -p /usr/bin/python3 --system-site-packages "${TELEGRAM_BOT_ENV}"; then
-    "${TELEGRAM_BOT_ENV}"/bin/pip install -r "${TELEGRAM_BOT_DIR}/scripts/requirements.txt"
-  else
-    log_error "failure while creating python3 moonraker-telegram-bot-env"
-    error_msg "Creation of Moonraker Telegram Bot virtualenv failed!"
-    exit 1
-  fi
-}
-
-function telegram_bot_setup() {
-  local instance_arr=("${@}")
-  ### checking dependencies
-  local dep=(git virtualenv)
-  dependency_check "${dep[@]}"
-
-  ### step 1: clone telegram bot
-  clone_telegram_bot "${TELEGRAM_BOT_REPO}"
-
-  ### step 2: install telegram bot dependencies and create python virtualenv
-  status_msg "Installing dependencies ..."
-  install_telegram_bot_dependencies
-  create_telegram_bot_virtualenv
-
-  ### step 3: create telegram.conf
-  create_telegram_conf "${instance_arr[@]}"
-
-  ### step 4: create telegram bot instances
-  create_telegram_bot_service "${instance_arr[@]}"
-
-  ### step 5: add telegram-bot to the update manager in moonraker.conf
-  patch_telegram_bot_update_manager
-
-  ### step 6: enable and start all instances
-  do_action_service "enable" "moonraker-telegram-bot"
-  do_action_service "start" "moonraker-telegram-bot"
-
-  ### confirm message
-  local confirm=""
-  (( instance_arr[0] == 1 )) && confirm="Telegram Bot has been set up!"
-  (( instance_arr[0] > 1 )) && confirm="${instance_arr[0]} Telegram Bot instances have been set up!"
-  print_confirm "${confirm}" && return
-}
-
-function clone_telegram_bot() {
-  local repo=${1}
-
-  status_msg "Cloning Moonraker-Telegram-Bot from ${repo} ..."
-  ### force remove existing Moonraker-Telegram-Bot dir
-  [[ -d ${repo} ]] && rm -rf "${TELEGRAM_BOT_DIR}"
-
-  cd "${HOME}" || exit 1
-  if ! git clone "${repo}" "${TELEGRAM_BOT_DIR}"; then
-    print_error "Cloning Moonraker-Telegram-Bot from\n ${repo}\n failed!"
-    exit 1
-  fi
-}
-
-function create_telegram_conf() {
-  local input=("${@}")
-  local telegram_bot_count=${input[0]} && unset "input[0]"
-  local names=("${input[@]}") && unset "input[@]"
-  local printer_data log_dir cfg cfg_dir
-
-  if (( telegram_bot_count == 1 )); then
-    printer_data="${HOME}/printer_data"
-    log_dir="${printer_data}/logs"
-    cfg_dir="${printer_data}/config"
-    cfg="${cfg_dir}/telegram.conf"
-
-    ### create required folder structure
-    create_required_folders "${printer_data}"
-
-    ### write single instance config
-    write_telegram_conf "${cfg_dir}" "${cfg}"
-
-  elif (( telegram_bot_count > 1 )); then
-    local j=0 re="^[1-9][0-9]*$"
-
-    for (( i=1; i <= telegram_bot_count; i++ )); do
-
-      printer_data="${HOME}/${names[${j}]}_data"
-      ### prefix instance name with "printer_" if it is only a number
-      [[ ${names[j]} =~ ${re} ]] && printer_data="${HOME}/printer_${names[${j}]}_data"
-
-
-      cfg_dir="${printer_data}/config"
-      cfg="${cfg_dir}/telegram.conf"
-      log_dir="${printer_data}/logs"
-
-      ### create required folder structure
-      create_required_folders "${printer_data}"
-
-      ### write multi instance config
-      write_telegram_conf "${cfg_dir}" "${cfg}"
-
-      j=$(( j + 1 ))
-    done && unset j
-
-  else
-    return 1
-  fi
-}
-
-function write_telegram_conf() {
-  local cfg_dir=${1} cfg=${2}
-  local conf_template="${TELEGRAM_BOT_DIR}/scripts/base_install_template"
-
-  if [[ ! -f ${cfg} ]]; then
-    status_msg "Creating telegram.conf in ${cfg_dir} ..."
-    cp "${conf_template}" "${cfg}"
-    ok_msg "telegram.conf created!"
-  else
-    ok_msg "File '${cfg}' already exists! Skipping..."
-  fi
-}
-
-function create_telegram_bot_service() {
-  local input=("${@}")
-  local instances=${input[0]} && unset "input[0]"
-  local names=("${input[@]}") && unset "input[@]"
-  local printer_data cfg_dir cfg log service env_file
-
-  if (( instances == 1 )); then
-    printer_data="${HOME}/printer_data"
-    cfg_dir="${printer_data}/config"
-    cfg="${cfg_dir}/telegram.conf"
-    log="${printer_data}/logs/telegram.log"
-    service="${SYSTEMD}/moonraker-telegram-bot.service"
-    env_file="${printer_data}/systemd/moonraker-telegram-bot.env"
-
-    ### create required folder structure
-    create_required_folders "${printer_data}"
-
-    ### write single instance service
-    write_telegram_bot_service "" "${cfg}" "${log}" "${service}" "${env_file}"
-    ok_msg "Telegram Bot instance created!"
-
-  elif (( instances > 1 )); then
-    local j=0 re="^[1-9][0-9]*$"
-
-    for (( i=1; i <= instances; i++ )); do
-      ### overwrite config folder if name is only a number
-      if [[ ${names[j]} =~ ${re} ]]; then
-        printer_data="${HOME}/printer_${names[${j}]}_data"
-      else
-        printer_data="${HOME}/${names[${j}]}_data"
-      fi
-
-      cfg_dir="${printer_data}/config"
-      cfg="${cfg_dir}/telegram.conf"
-      log="${printer_data}/logs/telegram.log"
-      service="${SYSTEMD}/moonraker-telegram-bot-${names[${j}]}.service"
-      env_file="${printer_data}/systemd/moonraker-telegram-bot.env"
-
-      ### create required folder structure
-      create_required_folders "${printer_data}"
-
-      ### write multi instance service
-      if write_telegram_bot_service "${names[${j}]}" "${cfg}" "${log}" "${service}" "${env_file}"; then
-        ok_msg "Telegram Bot instance moonraker-telegram-bot-${names[${j}]} created!"
-      else
-        error_msg "An error occured during creation of instance moonraker-telegram-bot-${names[${j}]}!"
-      fi
-
-      j=$(( j + 1 ))
-    done && unset j
-
-  else
-    return 1
-  fi
-}
-
-function write_telegram_bot_service() {
-  local i=${1} cfg=${2} log=${3} service=${4} env_file=${5}
-  local service_template="${KIAUH_SRCDIR}/resources/moonraker-telegram-bot.service"
-  local env_template="${KIAUH_SRCDIR}/resources/moonraker-telegram-bot.env"
-
-  ### replace all placeholders
-  if [[ ! -f ${service} ]]; then
-    status_msg "Creating service file for instance ${i} ..."
-    sudo cp "${service_template}" "${service}"
-    if [[ -z ${i} ]]; then
-      sudo sed -i "s| %INST%||" "${service}"
-    else
-      sudo sed -i "s|%INST%|${i}|" "${service}"
-    fi
-    sudo sed -i "s|%USER%|${USER}|g; s|%TELEGRAM_BOT_DIR%|${TELEGRAM_BOT_DIR}|; s|%ENV%|${TELEGRAM_BOT_ENV}|; s|%ENV_FILE%|${env_file}|" "${service}"
-
-    status_msg "Creating environment file for instance ${i} ..."
-    cp "${env_template}" "${env_file}"
-    sed -i "s|%USER%|${USER}|; s|%TELEGRAM_BOT_DIR%|${TELEGRAM_BOT_DIR}|; s|%CFG%|${cfg}|; s|%LOG%|${log}|" "${env_file}"
-  fi
-}
-
-
-#===================================================#
-#=========== REMOVE MOONRAKERTELEGRAMBOT ===========#
-#===================================================#
-
-function remove_telegram_bot_systemd() {
-  [[ -z $(telegram_bot_systemd) ]] && return
-
-  status_msg "Removing Telegram Bot Systemd Services ..."
-  for service in $(telegram_bot_systemd | cut -d"/" -f5); do
-    status_msg "Removing ${service} ..."
-    sudo systemctl stop "${service}"
-    sudo systemctl disable "${service}"
-    sudo rm -f "${SYSTEMD}/${service}"
-    ok_msg "Done!"
-  done
-
-  ### reloading units
-  sudo systemctl daemon-reload
-  sudo systemctl reset-failed
-  ok_msg "Telegram Bot Services removed!"
-}
-
-function remove_telegram_bot_dir() {
-  [[ ! -d ${TELEGRAM_BOT_DIR} ]] && return
-
-  status_msg "Removing Moonraker-Telegram-Bot directory ..."
-  rm -rf "${TELEGRAM_BOT_DIR}"
-  ok_msg "Directory removed!"
-}
-
-function remove_telegram_bot_env() {
-  [[ ! -d ${TELEGRAM_BOT_ENV} ]] && return
-
-  status_msg "Removing moonraker-telegram-bot-env directory ..."
-  rm -rf "${TELEGRAM_BOT_ENV}"
-  ok_msg "Directory removed!"
-}
-
-function remove_telegram_bot_env_file() {
-  local files regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/systemd\/moonraker-telegram-bot\.env"
-  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_telegram_bot_logs() {
-  local files regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/logs\/telegram\.log.*"
-  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_legacy_telegram_bot_logs() {
-  local files regex="telegram(-[0-9a-zA-Z]+)?\.log(.*)?"
-  files=$(find "${HOME}/klipper_logs" -maxdepth 1 -regextype posix-extended -regex "${HOME}/klipper_logs/${regex}" 2> /dev/null | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_telegram_bot() {
-  remove_telegram_bot_systemd
-  remove_telegram_bot_dir
-  remove_telegram_bot_env
-  remove_telegram_bot_env_file
-  remove_telegram_bot_logs
-  remove_legacy_telegram_bot_logs
-
-  local confirm="Moonraker-Telegram-Bot was successfully removed!"
-  print_confirm "${confirm}" && return
-}
-
-#===================================================#
-#=========== UPDATE MOONRAKERTELEGRAMBOT ===========#
-#===================================================#
-
-function update_telegram_bot() {
-  do_action_service "stop" "moonraker-telegram-bot"
-
-  if [[ ! -d ${TELEGRAM_BOT_DIR} ]]; then
-    clone_telegram_bot "${TELEGRAM_BOT_REPO}"
-  else
-    backup_before_update "moonraker-telegram-bot"
-    status_msg "Updating Moonraker ..."
-    cd "${TELEGRAM_BOT_DIR}" && git pull
-    ### read PKGLIST and install possible new dependencies
-    install_telegram_bot_dependencies
-    ### install possible new python dependencies
-    "${TELEGRAM_BOT_ENV}"/bin/pip install -r "${TELEGRAM_BOT_DIR}/scripts/requirements.txt"
-  fi
-
-  ok_msg "Update complete!"
-  do_action_service "start" "moonraker-telegram-bot"
-}
-
-#===================================================#
-#=========== MOONRAKERTELEGRAMBOT STATUS ===========#
-#===================================================#
-
-function get_telegram_bot_status() {
-  local sf_count status
-  sf_count="$(telegram_bot_systemd | wc -w)"
-
-  ### remove the "SERVICE" entry from the data array if a moonraker service is installed
-  local data_arr=(SERVICE "${TELEGRAM_BOT_DIR}" "${TELEGRAM_BOT_ENV}")
-  (( sf_count > 0 )) && unset "data_arr[0]"
-
-  ### count+1 for each found data-item from array
-  local filecount=0
-  for data in "${data_arr[@]}"; do
-    [[ -e ${data} ]] && filecount=$(( filecount + 1 ))
-  done
-
-  if (( filecount == ${#data_arr[*]} )); then
-    status="Installed: ${sf_count}"
-  elif (( filecount == 0 )); then
-    status="Not installed!"
-  else
-    status="Incomplete!"
-  fi
-  echo "${status}"
-}
-
-function get_local_telegram_bot_commit() {
-  [[ ! -d ${TELEGRAM_BOT_DIR} || ! -d "${TELEGRAM_BOT_DIR}/.git" ]] && return
-
-  local commit
-  cd "${TELEGRAM_BOT_DIR}"
-  commit="$(git describe HEAD --always --tags | cut -d "-" -f 1,2)"
-  echo "${commit}"
-}
-
-function get_remote_telegram_bot_commit() {
-  [[ ! -d ${TELEGRAM_BOT_DIR} || ! -d "${TELEGRAM_BOT_DIR}/.git" ]] && return
-
-  local commit
-  cd "${TELEGRAM_BOT_DIR}" && git fetch origin -q
-  commit=$(git describe origin/master --always --tags | cut -d "-" -f 1,2)
-  echo "${commit}"
-}
-
-function compare_telegram_bot_versions() {
-  local versions local_ver remote_ver
-  local_ver="$(get_local_telegram_bot_commit)"
-  remote_ver="$(get_remote_telegram_bot_commit)"
-
-  if [[ ${local_ver} != "${remote_ver}" ]]; then
-    versions="${yellow}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-    # add moonraker to application_updates_available in kiauh.ini
-    add_to_application_updates "telegram_bot"
-  else
-    versions="${green}$(printf " %-14s" "${local_ver}")${white}"
-    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
-  fi
-
-  echo "${versions}"
-}
-
-#================================================#
-#=================== HELPERS ====================#
-#================================================#
-
-function patch_telegram_bot_update_manager() {
-  local patched moonraker_configs regex
-  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
-  moonraker_configs=$(find "${HOME}" -maxdepth 3 -type f -regextype posix-extended -regex "${regex}" | sort)
-
-  patched="false"
-  for conf in ${moonraker_configs}; do
-    if ! grep -Eq "^\[update_manager moonraker-telegram-bot\]\s*$" "${conf}"; then
-      ### add new line to conf if it doesn't end with one
-      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"
-
-      ### add Moonraker-Telegram-Bot update manager section to moonraker.conf
-      status_msg "Adding Moonraker-Telegram-Bot to update manager in file:\n       ${conf}"
-      /bin/sh -c "cat >> ${conf}" << MOONRAKER_CONF
-
-[update_manager moonraker-telegram-bot]
-type: git_repo
-path: ~/moonraker-telegram-bot
-origin: https://github.com/nlef/moonraker-telegram-bot.git
-env: ~/moonraker-telegram-bot-env/bin/python
-requirements: scripts/requirements.txt
-install_script: scripts/install.sh
-MOONRAKER_CONF
-
-    fi
-
-    patched="true"
-  done
-
-  if [[ ${patched} == "true" ]]; then
-    do_action_service "restart" "moonraker"
-  fi
-}
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Thijs Triemstra	4c511017f1	README: Update KlipperScreen link and contributor name (#753 ) Update KlipperScreen link and contributor name update maintainer for klipperscreen	2025-11-30 17:42:36 +01:00
Clifford	372bab8847	feat(gcode_shell_command): allowing for expanding env vars (#747 ) allowing for expanding env vars	2025-11-23 12:53:52 +01:00
Charlie Lima	d5062d41de	refactor: remove dependency on libatlas-base-dev (#744 ) Remove dependency on libatlas-base-dev Co-authored-by: charlie-lima-bean <ktoaster@pm.me>	2025-11-23 09:25:05 +01:00
dw-0	e9459bd68e	fix(backup): correct backup folder path display in menu	2025-11-09 11:58:03 +01:00
dw-0	ee460663c9	fix(spoolman): ensure proper file handling when adding Spoolman entry	2025-10-28 12:12:36 +01:00
dw-0	6f0e0146ef	fix(client): improve version retrieval logic and handle JSON errors	2025-10-27 19:00:08 +01:00
dw-0	229f317025	fix(backup): do not create redundant subdirectory on single file backup	2025-10-27 09:47:09 +01:00
dw-0	48c0ae7227	fix(backup): allow reusing existing backup directory and enhance copy options	2025-10-27 09:30:33 +01:00
dw-0	9c7b5fcb10	fix: update scp submodule so duplicate sections are preserved while editing configs (#738 ) * fix: improve repository parsing logic to handle empty lines and comments more effectively * fix: update scp submodule so duplicate sections are preserved while editing configs (#735) * Squashed 'kiauh/core/submodules/simple_config_parser/' changes from f5eee99..5bc9e0a 5bc9e0a docs: update README 394dd7b refactor!: improve parsing and writing for config (#5) git-subtree-dir: kiauh/core/submodules/simple_config_parser git-subtree-split: 5bc9e0a50947f1be2f4877a10ab3a632774f82ea * fix(logging): change warning to error message for config creation failure * fix(config): improve readability by using descriptive variable names for options (cherry picked from commit `ae0a6b697e`) * Squashed 'kiauh/core/submodules/simple_config_parser/' changes from 5bc9e0a..eef8861 eef8861 refactor: update type hint for fallback parameter to Any 5d04325 Revert "chore: use Optional instead of \| and None instead of _UNSET" git-subtree-dir: kiauh/core/submodules/simple_config_parser git-subtree-split: eef8861f126ddf84012ac8bed77b467926016d3e * Squashed 'kiauh/core/submodules/simple_config_parser/' changes from eef8861..9c89612 9c89612 fix: correct assignment of raw value in option handling git-subtree-dir: kiauh/core/submodules/simple_config_parser git-subtree-split: 9c896124cf624e25410714649d306001250482f1 * fix: remove unnecessary whitespace in trusted_clients formatting	2025-10-26 22:03:26 +01:00
dw-0	191bdd4874	Revert "fix: update scp submodule so duplicate sections are preserved… (#737 ) Revert "fix: update scp submodule so duplicate sections are preserved while editing configs (#735)" This reverts commit `ae0a6b697e`.	2025-10-26 18:58:33 +01:00
dw-0	ae0a6b697e	fix: update scp submodule so duplicate sections are preserved while editing configs (#735 ) * Squashed 'kiauh/core/submodules/simple_config_parser/' changes from f5eee99..5bc9e0a 5bc9e0a docs: update README 394dd7b refactor!: improve parsing and writing for config (#5) git-subtree-dir: kiauh/core/submodules/simple_config_parser git-subtree-split: 5bc9e0a50947f1be2f4877a10ab3a632774f82ea * fix(logging): change warning to error message for config creation failure * fix(config): improve readability by using descriptive variable names for options	2025-10-26 16:28:33 +01:00
dw-0	b6521fd721	fix(ui): replace `top_border` and `bottom_border` functions with inline echo statements for dialogs	2025-10-15 17:05:18 +02:00
dw-0	62b0f4f0f5	chore(deps): replace `pyright` with `mypy` in dev requirements	2025-10-13 21:54:35 +02:00
dw-0	fa9a032aad	docs(changelog): update changelog for KIAUH v6 release	2025-10-12 20:37:26 +02:00
dw-0	5241d9c21f	fix: update README images and paths, add new assets to `docs/assets` folder	2025-10-12 20:37:19 +02:00
dw-0	31150c98e2	fix: implement custom version parsing for tag sorting	2025-10-11 16:56:02 +02:00
dw-0	3317114780	refactor(kiauh): remove legacy scripts, configurations, and assets af… (#729 ) refactor(kiauh): remove legacy scripts, configurations, and assets after migration to Python-based KIAUH v6	2025-10-11 16:38:08 +02:00
dw-0	8851bd68f8	feat(ui): update messaging for KIAUH v6 to reflect RC.2 status and encourage migration from v5	2025-10-05 17:20:30 +02:00
dw-0	9168ad88a6	refactor(backup): migrate `backup_printer_config_dir` to `BackupService` and update references accordingly	2025-09-30 21:11:48 +02:00
dw-0	03c0d46a2e	feat(backup): add fallback to search printer data directories in home directory if no instances found	2025-09-30 20:59:04 +02:00
dw-0	8a8afc60ee	feat(backup): integrate backup functionality into multiple extensions and config management	2025-09-30 20:36:42 +02:00
dw-0	5b68710b23	feat(backup): add specific backup methods for Klipper and Moonraker configs	2025-09-29 21:21:55 +02:00
dw-0	6cee0252ee	feat(moonraker): sync moonraker changes to SysDepsParser `206fd4828d` `72b89d905e`	2025-09-29 20:29:38 +02:00
dw-0	aff63665de	refactor: replace backup_manager with backup_service	2025-09-28 16:14:58 +02:00
dw-0	1ed1e0fc4c	chore(dev): replace pyright with mypy and configure mypy rules	2025-09-27 22:44:03 +02:00
dw-0	81ac102644	fix(v5): add back example file for custom Klipper repository management	2025-09-20 15:17:37 +02:00
				`@@ -1 +0,0 @@`
				`KLIPPER_ARGS="%KLIPPER_DIR%/klippy/klippy.py %CFG% -I %PRINTER% -l %LOG% -a %UDS%"`
				`@@ -1 +0,0 @@`
				`TELEGRAM_BOT_ARGS="%TELEGRAM_BOT_DIR%/bot/main.py -c %CFG% -l %LOG%"`
				`@@ -1 +0,0 @@`
				`MOONRAKER_ARGS="%MOONRAKER_DIR%/moonraker/moonraker.py -d %PRINTER_DATA%"`