Release v6.0.0-alpha.16

Merge develop into master (Release v6.0.0-alpha.16)

.gitignore

@@ -1,6 +1,10 @@
 .idea
 .vscode
 .pytest_cache
+.jupyter
+*.ipynb
+*.ipynb_checkpoints
+*.tmp
 __pycache__
 .kiauh-env
 *.code-workspace

README.md

@@ -28,12 +28,12 @@
 
 ### 📋 Prerequisites
 KIAUH is a script that assists you in installing Klipper on a Linux operating system that has
-already been flashed to your Raspberry Pi's (or other SBC's) SD card. As a result, you must ensure 
+already been flashed to your Raspberry Pi's (or other SBC's) SD card. As a result, you must ensure
-that you have a functional Linux system on hand. `Raspberry Pi OS Lite (either 32bit or 64bit)` is a recommended Linux image 
+that you have a functional Linux system on hand. `Raspberry Pi OS Lite (either 32bit or 64bit)` is a recommended Linux image
-if you are using a Raspberry Pi. The [official Raspberry Pi Imager](https://www.raspberrypi.com/software/) 
+if you are using a Raspberry Pi. The [official Raspberry Pi Imager](https://www.raspberrypi.com/software/)
 is the simplest way to flash an image like this to an SD card.
 
-* Once you have downloaded, installed and launched the Raspberry Pi Imager, 
+* Once you have downloaded, installed and launched the Raspberry Pi Imager,
 select `Choose OS -> Raspberry Pi OS (other)`: \
 <p align="center">
   <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/rpi_imager1.png" alt="KIAUH logo" height="350">
@@ -44,7 +44,7 @@ select `Choose OS -> Raspberry Pi OS (other)`: \
   <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/rpi_imager2.png" alt="KIAUH logo" height="350">
 </p>
 
-* Back in the Raspberry Pi Imager's main menu, select the corresponding SD card to which 
+* Back in the Raspberry Pi Imager's main menu, select the corresponding SD card to which
 you want to flash the image.
 
 * Make sure to go into the Advanced Option (the cog icon in the lower left corner of the main menu)
@@ -52,9 +52,9 @@ and enable SSH and configure Wi-Fi.
 
 * If you need more help for using the Raspberry Pi Imager, please visit the [official documentation](https://www.raspberrypi.com/documentation/computers/getting-started.html).
 
-These steps **only** apply if you are actually using a Raspberry Pi. In case you want 
+These steps **only** apply if you are actually using a Raspberry Pi. In case you want
-to use a different SBC (like an Orange Pi or any other Pi derivates), please look up on how to get an appropriate Linux image flashed 
+to use a different SBC (like an Orange Pi or any other Pi derivates), please look up on how to get an appropriate Linux image flashed
-to the SD card before proceeding further (usually done with Balena Etcher in those cases). Also make sure that KIAUH will be able to run 
+to the SD card before proceeding further (usually done with Balena Etcher in those cases). Also make sure that KIAUH will be able to run
 and operate on the Linux Distribution you are going to flash. You likely will have the most success with
 distributions based on Debian 11 Bullseye. Read the notes further down below in this document.
 
@@ -82,8 +82,8 @@ Finally, start KIAUH by running the next command:
 ```
 
 * **Step 4:** \
-You should now find yourself in the main menu of KIAUH. You will see several actions to choose from depending 
+You should now find yourself in the main menu of KIAUH. You will see several actions to choose from depending
-on what you want to do. To choose an action, simply type the corresponding number into the "Perform action" 
+on what you want to do. To choose an action, simply type the corresponding number into the "Perform action"
 prompt and confirm by hitting ENTER.
 
 <hr>
@@ -101,77 +101,83 @@ prompt and confirm by hitting ENTER.
 
 <h2 align="center">🌐 Sources & Further Information</h2>
 
-<table>
+<table align="center">
 <tr>
-<th><h3><a href="https://github.com/Klipper3d/klipper">Klipper</a></h3></th>
+    <th><h3><a href="https://github.com/Klipper3d/klipper">Klipper</a></h3></th>
-<th><h3><a href="https://github.com/Arksine/moonraker">Moonraker</a></h3></th>
+    <th><h3><a href="https://github.com/Arksine/moonraker">Moonraker</a></h3></th>
-<th><h3><a href="https://github.com/mainsail-crew/mainsail">Mainsail</a></h3></th>
+    <th><h3><a href="https://github.com/mainsail-crew/mainsail">Mainsail</a></h3></th>
 </tr>
 <tr>
-<th><img src="https://raw.githubusercontent.com/Klipper3d/klipper/master/docs/img/klipper-logo.png" alt="Klipper Logo" height="64"></th>
+    <th><img src="https://raw.githubusercontent.com/Klipper3d/klipper/master/docs/img/klipper-logo.png" alt="Klipper Logo" height="64"></th>
-<th><img src="https://avatars.githubusercontent.com/u/9563098?v=4" alt="Arksine avatar" height="64"></th>
+    <th><img src="https://avatars.githubusercontent.com/u/9563098?v=4" alt="Arksine avatar" height="64"></th>
-<th><img src="https://raw.githubusercontent.com/mainsail-crew/docs/master/assets/img/logo.png" alt="Mainsail Logo" height="64"></th>
+    <th><img src="https://raw.githubusercontent.com/mainsail-crew/docs/master/assets/img/logo.png" alt="Mainsail Logo" height="64"></th>
 </tr>
 <tr>
-<th>by <a href="https://github.com/KevinOConnor">KevinOConnor</a></th>
+    <th>by <a href="https://github.com/KevinOConnor">KevinOConnor</a></th>
-<th>by <a href="https://github.com/Arksine">Arksine</a></th>
+    <th>by <a href="https://github.com/Arksine">Arksine</a></th>
-<th>by <a href="https://github.com/mainsail-crew">mainsail-crew</a></th>
+    <th>by <a href="https://github.com/mainsail-crew">mainsail-crew</a></th>
-</tr>
-<tr>
-<th><h3><a href="https://github.com/fluidd-core/fluidd">Fluidd</a></h3></th>
-<th><h3><a href="https://github.com/jordanruthe/KlipperScreen">KlipperScreen</a></h3></th>
-<th><h3><a href="https://github.com/OctoPrint/OctoPrint">OctoPrint</a></h3></th>
-</tr>
-<tr>
-<th><img src="https://raw.githubusercontent.com/fluidd-core/fluidd/master/docs/assets/images/logo.svg" alt="Fluidd Logo" height="64"></th>
-<th><img src="https://avatars.githubusercontent.com/u/31575189?v=4" alt="jordanruthe avatar" height="64"></th>
-<th><img src="https://raw.githubusercontent.com/OctoPrint/OctoPrint/master/docs/images/octoprint-logo.png" alt="OctoPrint Logo" height="64"></th>
-</tr>
-<tr>
-<th>by <a href="https://github.com/fluidd-core">fluidd-core</a></th>
-<th>by <a href="https://github.com/jordanruthe">jordanruthe</a></th>
-<th>by <a href="https://github.com/OctoPrint">OctoPrint</a></th>
 </tr>
 
 <tr>
-<th><h3><a href="https://github.com/nlef/moonraker-telegram-bot">Moonraker-Telegram-Bot</a></h3></th>
+    <th><h3><a href="https://github.com/fluidd-core/fluidd">Fluidd</a></h3></th>
-<th><h3><a href="https://github.com/Kragrathea/pgcode">PrettyGCode for Klipper</a></h3></th>
+    <th><h3><a href="https://github.com/jordanruthe/KlipperScreen">KlipperScreen</a></h3></th>
-<th><h3><a href="https://github.com/TheSpaghettiDetective/moonraker-obico">Obico for Klipper</a></h3></th>
+    <th><h3><a href="https://github.com/OctoPrint/OctoPrint">OctoPrint</a></h3></th>
+</tr>
+<tr>
+    <th><img src="https://raw.githubusercontent.com/fluidd-core/fluidd/master/docs/assets/images/logo.svg" alt="Fluidd Logo" height="64"></th>
+    <th><img src="https://avatars.githubusercontent.com/u/31575189?v=4" alt="jordanruthe avatar" height="64"></th>
+    <th><img src="https://raw.githubusercontent.com/OctoPrint/OctoPrint/master/docs/images/octoprint-logo.png" alt="OctoPrint Logo" height="64"></th>
+</tr>
+<tr>
+    <th>by <a href="https://github.com/fluidd-core">fluidd-core</a></th>
+    <th>by <a href="https://github.com/jordanruthe">jordanruthe</a></th>
+    <th>by <a href="https://github.com/OctoPrint">OctoPrint</a></th>
 </tr>
 
 <tr>
-<th><img src="https://avatars.githubusercontent.com/u/52351624?v=4" alt="nlef avatar" height="64"></th>
+    <th><h3><a href="https://github.com/nlef/moonraker-telegram-bot">Moonraker-Telegram-Bot</a></h3></th>
-<th><img src="https://avatars.githubusercontent.com/u/5917231?v=4" alt="Kragrathea avatar" height="64"></th>
+    <th><h3><a href="https://github.com/Kragrathea/pgcode">PrettyGCode for Klipper</a></h3></th>
-<th><img src="https://avatars.githubusercontent.com/u/46323662?s=200&v=4" alt="Obico logo" height="64"></th>
+    <th><h3><a href="https://github.com/TheSpaghettiDetective/moonraker-obico">Obico for Klipper</a></h3></th>
+</tr>
+<tr>
+    <th><img src="https://avatars.githubusercontent.com/u/52351624?v=4" alt="nlef avatar" height="64"></th>
+    <th><img src="https://avatars.githubusercontent.com/u/5917231?v=4" alt="Kragrathea avatar" height="64"></th>
+    <th><img src="https://avatars.githubusercontent.com/u/46323662?s=200&v=4" alt="Obico logo" height="64"></th>
+</tr>
+<tr>
+    <th>by <a href="https://github.com/nlef">nlef</a></th>
+    <th>by <a href="https://github.com/Kragrathea">Kragrathea</a></th>
+    <th>by <a href="https://github.com/TheSpaghettiDetective">Obico</a></th>
 </tr>
 
 <tr>
-<th>by <a href="https://github.com/nlef">nlef</a></th>
+    <th><h3><a href="https://github.com/Clon1998/mobileraker_companion">Mobileraker's Companion</a></h3></th>
-<th>by <a href="https://github.com/Kragrathea">Kragrathea</a></th>
+    <th><h3><a href="https://octoeverywhere.com/?source=kiauh_readme">OctoEverywhere For Klipper</a></h3></th>
-<th>by <a href="https://github.com/TheSpaghettiDetective">Obico</a></th>
+    <th><h3><a href="https://github.com/crysxd/OctoApp-Plugin">OctoApp For Klipper</a></h3></th>
+</tr>
+<tr>
+    <th><a href="https://github.com/Clon1998/mobileraker_companion"><img src="https://raw.githubusercontent.com/Clon1998/mobileraker/master/assets/icon/mr_appicon.png" alt="Mobileraker Logo" height="64"></a></th>
+    <th><a href="https://octoeverywhere.com/?source=kiauh_readme"><img src="https://octoeverywhere.com/img/logo.svg" alt="OctoEverywhere Logo" height="64"></a></th>
+    <th><a href="https://octoapp.eu/?source=kiauh_readme"><img src="https://octoapp.eu/octoapp.webp" alt="OctoApp Logo" height="64"></a></th>
+</tr>
+<tr>
+    <th>by <a href="https://github.com/Clon1998">Patrick Schmidt</a></th>
+    <th>by <a href="https://github.com/QuinnDamerell">Quinn Damerell</a></th>
+    <th>by <a href="https://github.com/crysxd">Christian Würthner</a></th>
 </tr>
 
 <tr>
-<th><h3><a href="https://github.com/Clon1998/mobileraker_companion">Mobileraker's Companion</a></h3></th>
+    <th><h3><a href="https://github.com/staubgeborener/klipper-backup">Klipper-Backup</a></h3></th>
-<th><h3><a href="https://octoeverywhere.com/?source=kiauh_readme">OctoEverywhere For Klipper</a></h3></th>
+    <th><h3><a href="https://simplyprint.io/">SimplyPrint for Klipper</a></h3></th>
-<th><h3><a href="https://github.com/crysxd/OctoApp-Plugin">OctoApp For Klipper</a></h3></th>
-<th><h3></h3></th>
 </tr>
-
 <tr>
-<th><a href="https://github.com/Clon1998/mobileraker_companion"><img src="https://raw.githubusercontent.com/Clon1998/mobileraker/master/assets/icon/mr_appicon.png" alt="OctoEverywhere Logo" height="64"></a></th>
+    <th><a href="https://github.com/staubgeborener/klipper-backup"><img src="https://avatars.githubusercontent.com/u/28908603?v=4" alt="Staubgeroner Avatar" height="64"></a></th>
-<th><a href="https://octoeverywhere.com/?source=kiauh_readme"><img src="https://octoeverywhere.com/img/logo.svg" alt="OctoEverywhere Logo" height="64"></a></th>
+    <th><a href="https://github.com/SimplyPrint"><img src="https://avatars.githubusercontent.com/u/64896552?s=200&v=4" alt="" height="64"></a></th>
-<th><a href="https://octoapp.eu/?source=kiauh_readme"><img src="https://octoapp.eu/octoapp.webp" alt="OctoApp Logo" height="64"></a></th>
 </tr>
-
 <tr>
-<th>by <a href="https://github.com/Clon1998">Patrick Schmidt</a></th>
+    <th>by <a href="https://github.com/Staubgeborener">Staubgeborener</a></th>
-<th>by <a href="https://github.com/QuinnDamerell">Quinn Damerell</a></th>
+    <th>by <a href="https://github.com/SimplyPrint">SimplyPrint</a></th>
-<th>by <a href="https://github.com/crysxd">Christian Würthner</a></th>
-<th></th>
 </tr>
-
-
 </table>
 
 <hr>
@@ -186,6 +192,12 @@ prompt and confirm by hitting ENTER.
 
 <hr>
 
+<div align="center">
+    <img src="https://repobeats.axiom.co/api/embed/a1afbda9190c04a90cf4bd3061e5573bc836cb05.svg" alt="Repobeats analytics image"/>
+</div>
+
+<hr>
+
 <h2 align="center">✨ Credits ✨</h2>
 
 * A big thank you to [lixxbox](https://github.com/lixxbox) for that awesome KIAUH-Logo!

default.kiauh.cfg

@@ -14,5 +14,5 @@ port: 80
 unstable_releases: False
 
 [fluidd]
-port: 81
+port: 80
 unstable_releases: False

kiauh.py

@@ -1,7 +1,7 @@
 #!/usr/bin/env python3
 
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh.sh

@@ -10,7 +10,7 @@
 #=======================================================================#
 
 set -e
-clear
+clear -x
 
 # make sure we have the correct permissions while running the script
 umask 022
@@ -110,7 +110,7 @@ function launch_kiauh_v6() {
 
   export PYTHONPATH="${entrypoint}"
 
-  clear
+  clear -x
   python3 "${entrypoint}/kiauh.py"
 }
 

kiauh/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/components/crowsnest/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/components/crowsnest/crowsnest.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -27,10 +27,9 @@ from components.crowsnest import (
 )
 from components.klipper.klipper import Klipper
 from core.backup_manager.backup_manager import BackupManager
-from core.constants import CURRENT_USER
 from core.logger import DialogType, Logger
 from core.settings.kiauh_settings import KiauhSettings
-from core.types import ComponentStatus
+from core.types.component_status import ComponentStatus
 from utils.common import (
     check_install_dependencies,
     get_install_status,
@@ -73,7 +72,7 @@ def install_crowsnest() -> None:
     Logger.print_info("Installer will prompt you for sudo password!")
     try:
         run(
-            f"sudo make install BASE_USER={CURRENT_USER}",
+            f"sudo make install",
             cwd=CROWSNEST_DIR,
             shell=True,
             check=True,

kiauh/components/klipper/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -13,6 +13,8 @@ from core.backup_manager import BACKUP_ROOT_DIR
 
 MODULE_PATH = Path(__file__).resolve().parent
 
+KLIPPER_REPO_URL = "https://github.com/Klipper3d/klipper.git"
+
 # names
 KLIPPER_LOG_NAME = "klippy.log"
 KLIPPER_CFG_NAME = "printer.cfg"
@@ -23,6 +25,7 @@ KLIPPER_SERVICE_NAME = "klipper.service"
 
 # directories
 KLIPPER_DIR = Path.home().joinpath("klipper")
+KLIPPER_KCONFIGS_DIR = Path.home().joinpath("klipper-kconfigs")
 KLIPPER_ENV_DIR = Path.home().joinpath("klippy-env")
 KLIPPER_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("klipper-backups")
 

kiauh/components/klipper/klipper.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/components/klipper/klipper_dialogs.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -11,13 +11,8 @@ import textwrap
 from enum import Enum, unique
 from typing import List
 
-from core.constants import (
-    COLOR_CYAN,
-    COLOR_GREEN,
-    COLOR_YELLOW,
-    RESET_FORMAT,
-)
 from core.menus.base_menu import print_back_footer
+from core.types.color import Color
 from utils.instance_type import InstanceType
 
 
@@ -42,12 +37,12 @@ def print_instance_overview(
             if display_type is DisplayType.SERVICE_NAME
             else "printer directories"
         )
-        headline = f"{COLOR_GREEN}The following {d_type} were found:{RESET_FORMAT}"
+        headline = Color.apply(f"The following {d_type} were found:", Color.GREEN)
         dialog += f"║{headline:^64}║\n"
         dialog += "╟───────────────────────────────────────────────────────╢\n"
 
     if show_select_all:
-        select_all = f"{COLOR_YELLOW}a) Select all{RESET_FORMAT}"
+        select_all = Color.apply("a) Select all", Color.YELLOW)
         dialog += f"║ {select_all:<63}║\n"
         dialog += "║                                                       ║\n"
 
@@ -56,7 +51,9 @@ def print_instance_overview(
             name = s.service_file_path.stem
         else:
             name = s.data_dir
-        line = f"{COLOR_CYAN}{f'{i + start_index})' if show_index else '●'} {name}{RESET_FORMAT}"
+        line = Color.apply(
+            f"{f'{i + start_index})' if show_index else '●'} {name}", Color.CYAN
+        )
         dialog += f"║ {line:<63}║\n"
     dialog += "╟───────────────────────────────────────────────────────╢\n"
 
@@ -65,8 +62,10 @@ def print_instance_overview(
 
 
 def print_select_instance_count_dialog() -> None:
-    line1 = f"{COLOR_YELLOW}WARNING:{RESET_FORMAT}"
+    line1 = Color.apply("WARNING:", Color.YELLOW)
-    line2 = f"{COLOR_YELLOW}Setting up too many instances may crash your system.{RESET_FORMAT}"
+    line2 = Color.apply(
+        "Setting up too many instances may crash your system.", Color.YELLOW
+    )
     dialog = textwrap.dedent(
         f"""
         ╔═══════════════════════════════════════════════════════╗
@@ -85,8 +84,8 @@ def print_select_instance_count_dialog() -> None:
 
 
 def print_select_custom_name_dialog() -> None:
-    line1 = f"{COLOR_YELLOW}INFO:{RESET_FORMAT}"
+    line1 = Color.apply("INFO:", Color.YELLOW)
-    line2 = f"{COLOR_YELLOW}Only alphanumeric characters are allowed!{RESET_FORMAT}"
+    line2 = Color.apply("Only alphanumeric characters are allowed!", Color.YELLOW)
     dialog = textwrap.dedent(
         f"""
         ╔═══════════════════════════════════════════════════════╗

kiauh/components/klipper/klipper_remove.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -15,6 +15,8 @@ from components.klipper.klipper import Klipper
 from components.klipper.klipper_dialogs import print_instance_overview
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import Logger
+from core.services.message_service import Message
+from core.types.color import Color
 from utils.fs_utils import run_remove_routines
 from utils.input_utils import get_selection_input
 from utils.instance_utils import get_instances
@@ -25,7 +27,11 @@ def run_klipper_removal(
     remove_service: bool,
     remove_dir: bool,
     remove_env: bool,
-) -> None:
+) -> Message:
+    completion_msg = Message(
+        title="Klipper Removal Process completed",
+        color=Color.GREEN,
+    )
     klipper_instances: List[Klipper] = get_instances(Klipper)
 
     if remove_service:
@@ -33,20 +39,36 @@ def run_klipper_removal(
         if klipper_instances:
             instances_to_remove = select_instances_to_remove(klipper_instances)
             remove_instances(instances_to_remove)
+            instance_names = [i.service_file_path.stem for i in instances_to_remove]
+            txt = f"● Klipper instances removed: {', '.join(instance_names)}"
+            completion_msg.text.append(txt)
         else:
             Logger.print_info("No Klipper Services installed! Skipped ...")
 
     if (remove_dir or remove_env) and unit_file_exists("klipper", suffix="service"):
-        Logger.print_info("There are still other Klipper services installed:")
+        completion_msg.text = [
-        Logger.print_info(f"● '{KLIPPER_DIR}' was not removed.", prefix=False)
+            "Some Klipper services are still installed:",
-        Logger.print_info(f"● '{KLIPPER_ENV_DIR}' was not removed.", prefix=False)
+            f"● '{KLIPPER_DIR}' was not removed, even though selected for removal.",
+            f"● '{KLIPPER_ENV_DIR}' was not removed, even though selected for removal.",
+        ]
     else:
         if remove_dir:
             Logger.print_status("Removing Klipper local repository ...")
-            run_remove_routines(KLIPPER_DIR)
+            if run_remove_routines(KLIPPER_DIR):
+                completion_msg.text.append("● Klipper local repository removed")
         if remove_env:
             Logger.print_status("Removing Klipper Python environment ...")
-            run_remove_routines(KLIPPER_ENV_DIR)
+            if run_remove_routines(KLIPPER_ENV_DIR):
+                completion_msg.text.append("● Klipper Python environment removed")
+
+    if completion_msg.text:
+        completion_msg.text.insert(0, "The following actions were performed:")
+    else:
+        completion_msg.color = Color.YELLOW
+        completion_msg.centered = True
+        completion_msg.text = ["Nothing to remove."]
+
+    return completion_msg
 
 
 def select_instances_to_remove(instances: List[Klipper]) -> List[Klipper] | None:

kiauh/components/klipper/klipper_setup.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/components/klipper/klipper_utils.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -36,7 +36,7 @@ from core.logger import DialogType, Logger
 from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
     SimpleConfigParser,
 )
-from core.types import ComponentStatus
+from core.types.component_status import ComponentStatus
 from utils.common import get_install_status
 from utils.input_utils import get_confirm, get_number_input, get_string_input
 from utils.instance_utils import get_instances

kiauh/components/klipper/menus/klipper_remove_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -12,21 +12,25 @@ import textwrap
 from typing import Type
 
 from components.klipper import klipper_remove
-from core.constants import COLOR_CYAN, COLOR_RED, RESET_FORMAT
 from core.menus import FooterType, Option
 from core.menus.base_menu import BaseMenu
+from core.types.color import Color
 
 
 # noinspection PyUnusedLocal
 class KlipperRemoveMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+
+        self.title = "Remove Klipper"
+        self.title_color = Color.RED
         self.previous_menu: Type[BaseMenu] | None = previous_menu
         self.footer_type = FooterType.BACK
+
         self.remove_klipper_service = False
         self.remove_klipper_dir = False
         self.remove_klipper_env = False
-        self.selection_state = False
+        self.select_state = False
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
         from core.menus.remove_menu import RemoveMenu
@@ -43,23 +47,19 @@ class KlipperRemoveMenu(BaseMenu):
         }
 
     def print_menu(self) -> None:
-        header = " [ Remove Klipper ] "
+        checked = f"[{Color.apply('x', Color.CYAN)}]"
-        color = COLOR_RED
-        count = 62 - len(color) - len(RESET_FORMAT)
-        checked = f"[{COLOR_CYAN}x{RESET_FORMAT}]"
         unchecked = "[ ]"
         o1 = checked if self.remove_klipper_service else unchecked
         o2 = checked if self.remove_klipper_dir else unchecked
         o3 = checked if self.remove_klipper_env else unchecked
+        sel_state = f"{'Select'if not self.select_state else 'Deselect'} everything"
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ Enter a number and hit enter to select / deselect     ║
             ║ the specific option for removal.                      ║
             ╟───────────────────────────────────────────────────────╢
-            ║  a) {self._get_selection_state_str():37}             ║
+            ║  a) {sel_state:49} ║
             ╟───────────────────────────────────────────────────────╢
             ║  1) {o1} Remove Service                                ║
             ║  2) {o2} Remove Local Repository                       ║
@@ -72,10 +72,10 @@ class KlipperRemoveMenu(BaseMenu):
         print(menu, end="")
 
     def toggle_all(self, **kwargs) -> None:
-        self.selection_state = not self.selection_state
+        self.select_state = not self.select_state
-        self.remove_klipper_service = self.selection_state
+        self.remove_klipper_service = self.select_state
-        self.remove_klipper_dir = self.selection_state
+        self.remove_klipper_dir = self.select_state
-        self.remove_klipper_env = self.selection_state
+        self.remove_klipper_env = self.select_state
 
     def toggle_remove_klipper_service(self, **kwargs) -> None:
         self.remove_klipper_service = not self.remove_klipper_service
@@ -92,27 +92,18 @@ class KlipperRemoveMenu(BaseMenu):
             and not self.remove_klipper_dir
             and not self.remove_klipper_env
         ):
-            error = f"{COLOR_RED}Nothing selected! Select options to remove first.{RESET_FORMAT}"
+            msg = "Nothing selected! Select options to remove first."
-            print(error)
+            print(Color.apply(msg, Color.RED))
             return
 
-        klipper_remove.run_klipper_removal(
+        completion_msg = klipper_remove.run_klipper_removal(
             self.remove_klipper_service,
             self.remove_klipper_dir,
             self.remove_klipper_env,
         )
+        self.message_service.set_message(completion_msg)
 
         self.remove_klipper_service = False
         self.remove_klipper_dir = False
         self.remove_klipper_env = False
-
+        self.select_state = False
-        self._go_back()
-
-    def _get_selection_state_str(self) -> str:
-        return (
-            "Select everything" if not self.selection_state else "Deselect everything"
-        )
-
-    def _go_back(self, **kwargs) -> None:
-        if self.previous_menu is not None:
-            self.previous_menu().run()

kiauh/components/klipper_firmware/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/components/klipper_firmware/firmware_utils.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -7,6 +7,7 @@
 #  This file may be distributed under the terms of the GNU GPLv3 license  #
 # ======================================================================= #
 import re
+from pathlib import Path
 from subprocess import (
     DEVNULL,
     PIPE,
@@ -90,6 +91,21 @@ def find_usb_dfu_device() -> List[str]:
         return []
 
 
+def find_usb_rp2_boot_device() -> List[str]:
+    try:
+        output = check_output("lsusb", shell=True, text=True, stderr=DEVNULL)
+        device_list = []
+        if output:
+            devices = output.splitlines()
+            device_list = [d.split(" ")[5] for d in devices if "RP2 Boot" in d]
+        return device_list
+
+    except CalledProcessError as e:
+        Logger.print_error("Unable to find a USB RP2 Boot device!")
+        Logger.print_error(e, prefix=False)
+        return []
+
+
 def get_sd_flash_board_list() -> List[str]:
     if not KLIPPER_DIR.exists() or not SD_FLASH_SCRIPT.exists():
         return []
@@ -123,6 +139,7 @@ def start_flash_process(flash_options: FlashOptions) -> None:
         if flash_options.flash_method is FlashMethod.REGULAR:
             cmd = [
                 "make",
+                f"KCONFIG_CONFIG={flash_options.selected_kconfig}",
                 flash_options.flash_command.value,
                 f"FLASH_DEVICE={flash_options.selected_mcu}",
             ]
@@ -150,17 +167,17 @@ def start_flash_process(flash_options: FlashOptions) -> None:
         if rc != 0:
             raise Exception(f"Flashing failed with returncode: {rc}")
         else:
-            Logger.print_ok("Flashing successfull!", start="\n", end="\n\n")
+            Logger.print_ok("Flashing successful!", start="\n", end="\n\n")
 
     except (Exception, CalledProcessError):
         Logger.print_error("Flashing failed!", start="\n")
         Logger.print_error("See the console output above!", end="\n\n")
 
 
-def run_make_clean() -> None:
+def run_make_clean(kconfig=Path(KLIPPER_DIR.joinpath(".config"))) -> None:
     try:
         run(
-            "make clean",
+            f"make KCONFIG_CONFIG={kconfig} clean",
             cwd=KLIPPER_DIR,
             shell=True,
             check=True,
@@ -170,10 +187,10 @@ def run_make_clean() -> None:
         raise
 
 
-def run_make_menuconfig() -> None:
+def run_make_menuconfig(kconfig=Path(KLIPPER_DIR.joinpath(".config"))) -> None:
     try:
         run(
-            "make PYTHON=python3 menuconfig",
+            f"make PYTHON=python3 KCONFIG_CONFIG={kconfig} menuconfig",
             cwd=KLIPPER_DIR,
             shell=True,
             check=True,
@@ -183,10 +200,10 @@ def run_make_menuconfig() -> None:
         raise
 
 
-def run_make() -> None:
+def run_make(kconfig=Path(KLIPPER_DIR.joinpath(".config"))) -> None:
     try:
         run(
-            "make PYTHON=python3",
+            f"make PYTHON=python3 KCONFIG_CONFIG={kconfig}",
             cwd=KLIPPER_DIR,
             shell=True,
             check=True,

kiauh/components/klipper_firmware/flash_options.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -26,6 +26,7 @@ class FlashCommand(Enum):
 class ConnectionType(Enum):
     USB = "USB"
     USB_DFU = "USB (DFU)"
+    USB_RP2040 = "USB (RP2040)"
     UART = "UART"
 
 
@@ -38,6 +39,7 @@ class FlashOptions:
     _selected_mcu: str = ""
     _selected_board: str = ""
     _selected_baudrate: int = 250000
+    _selected_kconfig: str = ".config"
 
     def __new__(cls, *args, **kwargs):
         if not cls._instance:
@@ -103,3 +105,11 @@ class FlashOptions:
     @selected_baudrate.setter
     def selected_baudrate(self, value: int) -> None:
         self._selected_baudrate = value
+
+    @property
+    def selected_kconfig(self) -> str:
+        return self._selected_kconfig
+
+    @selected_kconfig.setter
+    def selected_kconfig(self, value: str) -> None:
+        self._selected_kconfig = value

kiauh/components/klipper_firmware/menus/klipper_build_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -9,18 +9,22 @@
 from __future__ import annotations
 
 import textwrap
+from pathlib import Path
+from shutil import copyfile
 from typing import List, Set, Type
 
-from components.klipper import KLIPPER_DIR
+from components.klipper import KLIPPER_DIR, KLIPPER_KCONFIGS_DIR
 from components.klipper_firmware.firmware_utils import (
     run_make,
     run_make_clean,
     run_make_menuconfig,
 )
-from core.constants import COLOR_CYAN, COLOR_GREEN, COLOR_RED, RESET_FORMAT
+from components.klipper_firmware.flash_options import FlashOptions
-from core.logger import Logger
+from core.logger import DialogType, Logger
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
+from core.types.color import Color
+from utils.input_utils import get_confirm, get_string_input
 from utils.sys_utils import (
     check_package_install,
     install_system_packages,
@@ -30,12 +34,25 @@ from utils.sys_utils import (
 
 # noinspection PyUnusedLocal
 # noinspection PyMethodMayBeStatic
-class KlipperBuildFirmwareMenu(BaseMenu):
+class KlipperKConfigMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title = "Firmware Config Menu"
+        self.title_color = Color.CYAN
         self.previous_menu: Type[BaseMenu] | None = previous_menu
-        self.deps: Set[str] = {"build-essential", "dpkg-dev", "make"}
+        self.flash_options = FlashOptions()
-        self.missing_deps: List[str] = check_package_install(self.deps)
+        self.kconfigs_dirname = KLIPPER_KCONFIGS_DIR
+        self.kconfig_default = KLIPPER_DIR.joinpath(".config")
+        self.configs: List[Path] = []
+        self.kconfig = (
+            self.kconfig_default if not Path(self.kconfigs_dirname).is_dir() else None
+        )
+
+    def run(self) -> None:
+        if not self.kconfig:
+            super().run()
+        else:
+            self.flash_options.selected_kconfig = self.kconfig
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
         from core.menus.advanced_menu import AdvancedMenu
@@ -45,21 +62,107 @@ class KlipperBuildFirmwareMenu(BaseMenu):
         )
 
     def set_options(self) -> None:
-        if len(self.missing_deps) == 0:
+        if not Path(self.kconfigs_dirname).is_dir():
-            self.input_label_txt = "Press ENTER to continue"
+            return
-            self.default_option = Option(method=self.start_build_process)
+
-        else:
+        self.input_label_txt = "Select config or action to continue (default=N)"
-            self.input_label_txt = "Press ENTER to install dependencies"
+        self.default_option = Option(
-            self.default_option = Option(method=self.install_missing_deps)
+            method=self.select_config, opt_data=self.kconfig_default
+        )
+
+        option_index = 1
+        for kconfig in Path(self.kconfigs_dirname).iterdir():
+            if not kconfig.name.endswith(".config"):
+                continue
+            kconfig_path = self.kconfigs_dirname.joinpath(kconfig)
+            if Path(kconfig_path).is_file():
+                self.configs += [kconfig]
+                self.options[str(option_index)] = Option(
+                    method=self.select_config, opt_data=kconfig_path
+                )
+                option_index += 1
+        self.options["n"] = Option(
+            method=self.select_config, opt_data=self.kconfig_default
+        )
 
     def print_menu(self) -> None:
-        header = " [ Build Firmware Menu ] "
+        cfg_found_str = Color.apply(
-        color = COLOR_CYAN
+            "Previously saved firmware configs found!", Color.GREEN
-        count = 62 - len(color) - len(RESET_FORMAT)
+        )
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
+            ╟───────────────────────────────────────────────────────╢
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
+            ║ {cfg_found_str:^62} ║
+            ║                                                       ║
+            ║    Select an existing config or create a new one.     ║
+            ╟───────────────────────────────────────────────────────╢
+            ║ Available firmware configs:                           ║
+            """
+        )[1:]
+
+        start_index = 1
+        for i, s in enumerate(self.configs):
+            line = f"{start_index + i}) {s.name}"
+            menu += f"║ {line:<54}║\n"
+
+        new_config = Color.apply("N) Create new firmware config", Color.GREEN)
+        menu += "║                                                       ║\n"
+        menu += f"║ {new_config:<62} ║\n"
+
+        menu += "╟───────────────────────────────────────────────────────╢\n"
+
+        print(menu, end="")
+
+    def select_config(self, **kwargs) -> None:
+        selection: str | None = kwargs.get("opt_data", None)
+        if selection is None:
+            raise Exception("opt_data is None")
+        if not Path(selection).is_file() and selection != self.kconfig_default:
+            raise Exception("opt_data does not exists")
+        self.kconfig = selection
+
+
+# noinspection PyUnusedLocal
+# noinspection PyMethodMayBeStatic
+class KlipperBuildFirmwareMenu(BaseMenu):
+    def __init__(
+        self, kconfig: str | None = None, previous_menu: Type[BaseMenu] | None = None
+    ):
+        super().__init__()
+        self.title = "Build Firmware Menu"
+        self.title_color = Color.CYAN
+        self.previous_menu: Type[BaseMenu] | None = previous_menu
+        self.deps: Set[str] = {"build-essential", "dpkg-dev", "make"}
+        self.missing_deps: List[str] = check_package_install(self.deps)
+        self.flash_options = FlashOptions()
+        self.kconfigs_dirname = KLIPPER_KCONFIGS_DIR
+        self.kconfig_default = KLIPPER_DIR.joinpath(".config")
+        self.kconfig = self.flash_options.selected_kconfig
+
+    def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
+        from core.menus.advanced_menu import AdvancedMenu
+
+        self.previous_menu = (
+            previous_menu if previous_menu is not None else AdvancedMenu
+        )
+
+    def set_options(self) -> None:
+        self.input_label_txt = "Press ENTER to install dependencies"
+        self.default_option = Option(method=self.install_missing_deps)
+
+    def run(self):
+        # immediately start the build process if all dependencies are met
+        if len(self.missing_deps) == 0:
+            self.start_build_process()
+        else:
+            super().run()
+
+    def print_menu(self) -> None:
+        txt = Color.apply("Dependencies are missing!", Color.RED)
+        menu = textwrap.dedent(
+            f"""
+            ╟───────────────────────────────────────────────────────╢
+            ║ {txt:^62} ║
             ╟───────────────────────────────────────────────────────╢
             ║ The following dependencies are required:              ║
             ║                                                       ║
@@ -67,20 +170,14 @@ class KlipperBuildFirmwareMenu(BaseMenu):
         )[1:]
 
         for d in self.deps:
-            status_ok = f"{COLOR_GREEN}*INSTALLED*{RESET_FORMAT}"
+            status_ok = Color.apply("*INSTALLED*", Color.GREEN)
-            status_missing = f"{COLOR_RED}*MISSING*{RESET_FORMAT}"
+            status_missing = Color.apply("*MISSING*", Color.RED)
             status = status_missing if d in self.missing_deps else status_ok
-            padding = 39 - len(d) + len(status) + (len(status_ok) - len(status))
+            padding = 40 - len(d) + len(status) + (len(status_ok) - len(status))
-            d = f" {COLOR_CYAN}● {d}{RESET_FORMAT}"
+            d = Color.apply(f"● {d}", Color.CYAN)
             menu += f"║ {d}{status:>{padding}} ║\n"
+
         menu += "║                                                       ║\n"
-
-        if len(self.missing_deps) == 0:
-            line = f"{COLOR_GREEN}All dependencies are met!{RESET_FORMAT}"
-        else:
-            line = f"{COLOR_RED}Dependencies are missing!{RESET_FORMAT}"
-
-        menu += f"║ {line:<62} ║\n"
         menu += "╟───────────────────────────────────────────────────────╢\n"
 
         print(menu, end="")
@@ -99,13 +196,16 @@ class KlipperBuildFirmwareMenu(BaseMenu):
 
     def start_build_process(self, **kwargs) -> None:
         try:
-            run_make_clean()
+            run_make_clean(self.kconfig)
-            run_make_menuconfig()
+            run_make_menuconfig(self.kconfig)
-            run_make()
+            run_make(self.kconfig)
 
             Logger.print_ok("Firmware successfully built!")
             Logger.print_ok(f"Firmware file located in '{KLIPPER_DIR}/out'!")
 
+            if self.kconfig == self.kconfig_default:
+                self.save_firmware_config()
+
         except Exception as e:
             Logger.print_error(e)
             Logger.print_error("Building Klipper Firmware failed!")
@@ -113,3 +213,62 @@ class KlipperBuildFirmwareMenu(BaseMenu):
         finally:
             if self.previous_menu is not None:
                 self.previous_menu().run()
+
+    def save_firmware_config(self) -> None:
+        Logger.print_dialog(
+            DialogType.CUSTOM,
+            [
+                "You can save the firmware build configs for multiple MCUs,"
+                " and use them to update the firmware after a Klipper version upgrade"
+            ],
+            custom_title="Save firmware config",
+        )
+        if not get_confirm(
+            "Do you want to save firmware config?", default_choice=False
+        ):
+            return
+
+        filename = self.kconfig_default
+        while True:
+            Logger.print_dialog(
+                DialogType.CUSTOM,
+                [
+                    "Allowed characters: a-z, 0-9 and '-'",
+                    "The name must not contain the following:",
+                    "\n\n",
+                    "● Any special characters",
+                    "● No leading or trailing '-'",
+                ],
+            )
+            input_name = get_string_input(
+                "Enter the new firmware config name",
+                regex=r"^[a-z0-9]+([a-z0-9-]*[a-z0-9])?$",
+            )
+            filename = self.kconfigs_dirname.joinpath(f"{input_name}.config")
+
+            if Path(filename).is_file():
+                if get_confirm(
+                    f"Firmware config {input_name} already exists, overwrite?",
+                    default_choice=False,
+                ):
+                    break
+
+            if Path(filename).is_dir():
+                Logger.print_error(f"Path {filename} exists and it's a directory")
+
+            if not Path(filename).exists():
+                break
+
+        if not get_confirm(
+            f"Save firmware config to '{filename}'?", default_choice=True
+        ):
+            Logger.print_info("Aborted saving firmware config ...")
+            return
+
+        if not Path(self.kconfigs_dirname).exists():
+            Path(self.kconfigs_dirname).mkdir()
+
+        copyfile(self.kconfig_default, filename)
+
+        Logger.print_ok()
+        Logger.print_ok(f"Firmware config successfully saved to {filename}")

kiauh/components/klipper_firmware/menus/klipper_flash_error_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -12,9 +12,9 @@ import textwrap
 from typing import Type
 
 from components.klipper_firmware.flash_options import FlashMethod, FlashOptions
-from core.constants import COLOR_RED, RESET_FORMAT
 from core.menus import FooterType, Option
-from core.menus.base_menu import BaseMenu
+from core.menus.base_menu import BaseMenu, MenuTitleStyle
+from core.types.color import Color
 
 
 # noinspection PyUnusedLocal
@@ -22,6 +22,9 @@ from core.menus.base_menu import BaseMenu
 class KlipperNoFirmwareErrorMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title = "!!! NO FIRMWARE FILE FOUND !!!"
+        self.title_color = Color.RED
+        self.title_style = MenuTitleStyle.PLAIN
         self.previous_menu: Type[BaseMenu] | None = previous_menu
 
         self.flash_options = FlashOptions()
@@ -35,16 +38,11 @@ class KlipperNoFirmwareErrorMenu(BaseMenu):
         self.default_option = Option(method=self.go_back)
 
     def print_menu(self) -> None:
-        header = "!!! NO FIRMWARE FILE FOUND !!!"
+        line1 = "Unable to find a compiled firmware file!"
-        color = COLOR_RED
-        count = 62 - len(color) - len(RESET_FORMAT)
-        line1 = f"{color}Unable to find a compiled firmware file!{RESET_FORMAT}"
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
-            ║ {line1:<62} ║
+            ║ {Color.apply(line1, Color.RED):<62} ║
             ║                                                       ║
             ║ Make sure, that:                                      ║
             ║ ● the folder '~/klipper/out' and its content exist    ║
@@ -71,6 +69,9 @@ class KlipperNoFirmwareErrorMenu(BaseMenu):
 class KlipperNoBoardTypesErrorMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title = "!!! ERROR GETTING BOARD LIST !!!"
+        self.title_color = Color.RED
+        self.title_style = MenuTitleStyle.PLAIN
         self.previous_menu: Type[BaseMenu] | None = previous_menu
         self.footer_type = FooterType.BLANK
         self.input_label_txt = "Press ENTER to go back to [Main Menu]"
@@ -82,16 +83,11 @@ class KlipperNoBoardTypesErrorMenu(BaseMenu):
         self.default_option = Option(method=self.go_back)
 
     def print_menu(self) -> None:
-        header = "!!! ERROR GETTING BOARD LIST !!!"
+        line1 = "Reading the list of supported boards failed!"
-        color = COLOR_RED
-        count = 62 - len(color) - len(RESET_FORMAT)
-        line1 = f"{color}Reading the list of supported boards failed!{RESET_FORMAT}"
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
-            ║ {line1:<62} ║
+            ║ {Color.apply(line1, Color.RED):<62} ║
             ║                                                       ║
             ║ Make sure, that:                                      ║
             ║ ● the folder '~/klipper' and all its content exist    ║

kiauh/components/klipper_firmware/menus/klipper_flash_help_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -9,16 +9,21 @@
 from __future__ import annotations
 
 import textwrap
-from typing import Type
+from typing import Tuple, Type
 
-from core.constants import COLOR_CYAN, COLOR_YELLOW, RESET_FORMAT
+from core.menus.base_menu import BaseMenu, MenuTitleStyle
-from core.menus.base_menu import BaseMenu
+from core.types.color import Color
+
+
+def __title_config__() -> Tuple[str, Color, MenuTitleStyle]:
+    return "< ? > Help: Flash MCU < ? >", Color.YELLOW, MenuTitleStyle.PLAIN
 
 
 # noinspection DuplicatedCode
 class KlipperFlashMethodHelpMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title, self.title_color, self.title_style = __title_config__()
         self.previous_menu: Type[BaseMenu] | None = previous_menu
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
@@ -34,15 +39,10 @@ class KlipperFlashMethodHelpMenu(BaseMenu):
         pass
 
     def print_menu(self) -> None:
-        header = " < ? > Help: Flash MCU < ? > "
+        subheader1 = Color.apply("Regular flashing method:", Color.CYAN)
-        color = COLOR_YELLOW
+        subheader2 = Color.apply("Updating via SD-Card Update:", Color.CYAN)
-        count = 62 - len(color) - len(RESET_FORMAT)
-        subheader1 = f"{COLOR_CYAN}Regular flashing method:{RESET_FORMAT}"
-        subheader2 = f"{COLOR_CYAN}Updating via SD-Card Update:{RESET_FORMAT}"
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ {subheader1:<62} ║
             ║ The default method to flash controller boards which   ║
@@ -77,6 +77,7 @@ class KlipperFlashMethodHelpMenu(BaseMenu):
 class KlipperFlashCommandHelpMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title, self.title_color, self.title_style = __title_config__()
         self.previous_menu: Type[BaseMenu] | None = previous_menu
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
@@ -92,15 +93,10 @@ class KlipperFlashCommandHelpMenu(BaseMenu):
         pass
 
     def print_menu(self) -> None:
-        header = " < ? > Help: Flash MCU < ? > "
+        subheader1 = Color.apply("make flash:", Color.CYAN)
-        color = COLOR_YELLOW
+        subheader2 = Color.apply("make serialflash:", Color.CYAN)
-        count = 62 - len(color) - len(RESET_FORMAT)
-        subheader1 = f"{COLOR_CYAN}make flash:{RESET_FORMAT}"
-        subheader2 = f"{COLOR_CYAN}make serialflash:{RESET_FORMAT}"
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ {subheader1:<62} ║
             ║ The default command to flash controller board, it     ║
@@ -121,6 +117,7 @@ class KlipperFlashCommandHelpMenu(BaseMenu):
 class KlipperMcuConnectionHelpMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title, self.title_color, self.title_style = __title_config__()
         self.previous_menu: Type[BaseMenu] | None = previous_menu
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
@@ -138,15 +135,12 @@ class KlipperMcuConnectionHelpMenu(BaseMenu):
         pass
 
     def print_menu(self) -> None:
-        header = " < ? > Help: Flash MCU < ? > "
+        subheader1 = Color.apply("USB:", Color.CYAN)
-        color = COLOR_YELLOW
+        subheader2 = Color.apply("UART:", Color.CYAN)
-        count = 62 - len(color) - len(RESET_FORMAT)
+        subheader3 = Color.apply("USB DFU:", Color.CYAN)
-        subheader1 = f"{COLOR_CYAN}USB:{RESET_FORMAT}"
+        subheader4 = Color.apply("USB RP2040 Boot:", Color.CYAN)
-        subheader2 = f"{COLOR_CYAN}UART:{RESET_FORMAT}"
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ {subheader1:<62} ║
             ║ Selecting USB as the connection method will scan the  ║
@@ -164,6 +158,19 @@ class KlipperMcuConnectionHelpMenu(BaseMenu):
             ║ port your controller board is connected to when using ║
             ║ this connection method.                               ║
             ║                                                       ║
+            ║ {subheader3:<62} ║
+            ║ Selecting USB DFU as the connection method will scan  ║
+            ║ the USB ports for connected controller boards in      ║
+            ║ STM32 DFU mode, which is usually done by holding down ║
+            ║ the BOOT button or setting a special jumper on the    ║
+            ║ board before powering up.                             ║
+            ║                                                       ║
+            ║ {subheader4:<62} ║
+            ║ Selecting USB RP2 Boot as the connection method will  ║
+            ║ scan the USB ports for connected RP2040 controller    ║
+            ║ boards in Boot mode, which is usually done by holding ║
+            ║ down the BOOT button before powering up.              ║
+            ║                                                       ║
             ╟───────────────────────────────────────────────────────╢
             """
         )[1:]

kiauh/components/klipper_firmware/menus/klipper_flash_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -10,6 +10,7 @@ from __future__ import annotations
 
 import textwrap
 import time
+from pathlib import Path
 from typing import Type
 
 from components.klipper_firmware.firmware_utils import (
@@ -17,6 +18,7 @@ from components.klipper_firmware.firmware_utils import (
     find_uart_device,
     find_usb_device_by_id,
     find_usb_dfu_device,
+    find_usb_rp2_boot_device,
     get_sd_flash_board_list,
     start_flash_process,
 )
@@ -35,10 +37,10 @@ from components.klipper_firmware.menus.klipper_flash_help_menu import (
     KlipperFlashMethodHelpMenu,
     KlipperMcuConnectionHelpMenu,
 )
-from core.constants import COLOR_CYAN, COLOR_RED, COLOR_YELLOW, RESET_FORMAT
 from core.logger import DialogType, Logger
 from core.menus import FooterType, Option
-from core.menus.base_menu import BaseMenu
+from core.menus.base_menu import BaseMenu, MenuTitleStyle
+from core.types.color import Color
 from utils.input_utils import get_number_input
 
 
@@ -47,6 +49,8 @@ from utils.input_utils import get_number_input
 class KlipperFlashMethodMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title = "MCU Flash Menu"
+        self.title_color = Color.CYAN
         self.help_menu = KlipperFlashMethodHelpMenu
         self.input_label_txt = "Select flash method"
         self.footer_type = FooterType.BACK_HELP
@@ -66,17 +70,13 @@ class KlipperFlashMethodMenu(BaseMenu):
         }
 
     def print_menu(self) -> None:
-        header = " [ MCU Flash Menu ] "
+        subheader = Color.apply("ATTENTION:", Color.YELLOW)
-        subheader = f"{COLOR_YELLOW}ATTENTION:{RESET_FORMAT}"
+        subline1 = Color.apply(
-        subline1 = f"{COLOR_YELLOW}Make sure to select the correct method for the  MCU!{RESET_FORMAT}"
+            "Make sure to select the correct method for the MCU!", Color.YELLOW
-        subline2 = f"{COLOR_YELLOW}Not all MCUs support both methods!{RESET_FORMAT}"
+        )
-
+        subline2 = Color.apply("Not all MCUs support both methods!", Color.YELLOW)
-        color = COLOR_CYAN
-        count = 62 - len(color) - len(RESET_FORMAT)
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ Select the flash method for flashing the MCU.         ║
             ║                                                       ║
@@ -111,6 +111,9 @@ class KlipperFlashMethodMenu(BaseMenu):
 class KlipperFlashCommandMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title = "Which flash command to use for flashing the MCU?"
+        self.title_style = MenuTitleStyle.PLAIN
+        self.title_color = Color.YELLOW
         self.help_menu = KlipperFlashCommandHelpMenu
         self.input_label_txt = "Select flash command"
         self.footer_type = FooterType.BACK_HELP
@@ -131,8 +134,6 @@ class KlipperFlashCommandMenu(BaseMenu):
     def print_menu(self) -> None:
         menu = textwrap.dedent(
             """
-            ╔═══════════════════════════════════════════════════════╗
-            ║ Which flash command to use for flashing the MCU?      ║
             ╟───────────────────────────────────────────────────────╢
             ║ 1) make flash (default)                               ║
             ║ 2) make serialflash (stm32flash)                      ║
@@ -160,6 +161,9 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
         self, previous_menu: Type[BaseMenu] | None = None, standalone: bool = False
     ):
         super().__init__()
+        self.title = "Make sure that the controller board is connected now!"
+        self.title_style = MenuTitleStyle.PLAIN
+        self.title_color = Color.YELLOW
         self.previous_menu: Type[BaseMenu] | None = previous_menu
         self.__standalone = standalone
         self.help_menu = KlipperMcuConnectionHelpMenu
@@ -177,22 +181,19 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
             "1": Option(method=self.select_usb),
             "2": Option(method=self.select_dfu),
             "3": Option(method=self.select_usb_dfu),
+            "4": Option(method=self.select_usb_rp2040),
         }
 
     def print_menu(self) -> None:
-        header = "Make sure that the controller board is connected now!"
-        color = COLOR_YELLOW
-        count = 62 - len(color) - len(RESET_FORMAT)
         menu = textwrap.dedent(
-            f"""
+            """
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ How is the controller board connected to the host?    ║
             ╟───────────────────────────────────────────────────────╢
             ║ 1) USB                                                ║
             ║ 2) UART                                               ║
             ║ 3) USB (DFU mode)                                     ║
+            ║ 4) USB (RP2040 mode)                                  ║
             ╟───────────────────────────┬───────────────────────────╢
             """
         )[1:]
@@ -210,6 +211,10 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
         self.flash_options.connection_type = ConnectionType.USB_DFU
         self.get_mcu_list()
 
+    def select_usb_rp2040(self, **kwargs):
+        self.flash_options.connection_type = ConnectionType.USB_RP2040
+        self.get_mcu_list()
+
     def get_mcu_list(self, **kwargs):
         conn_type = self.flash_options.connection_type
 
@@ -222,6 +227,11 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
         elif conn_type is ConnectionType.USB_DFU:
             Logger.print_status("Identifying MCU connected via USB in DFU mode ...")
             self.flash_options.mcu_list = find_usb_dfu_device()
+        elif conn_type is ConnectionType.USB_RP2040:
+            Logger.print_status(
+                "Identifying MCU connected via USB in RP2 Boot mode ..."
+            )
+            self.flash_options.mcu_list = find_usb_rp2_boot_device()
 
         if len(self.flash_options.mcu_list) < 1:
             Logger.print_warn("No MCUs found!")
@@ -231,7 +241,7 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
         if self.__standalone and len(self.flash_options.mcu_list) > 0:
             Logger.print_ok("The following MCUs were found:", prefix=False)
             for i, mcu in enumerate(self.flash_options.mcu_list):
-                print(f"   ● MCU #{i}: {COLOR_CYAN}{mcu}{RESET_FORMAT}")
+                print(f"   ● MCU #{i}: {Color.CYAN}{mcu}{Color.RST}")
             time.sleep(3)
             return
 
@@ -246,6 +256,9 @@ class KlipperSelectMcuConnectionMenu(BaseMenu):
 class KlipperSelectMcuIdMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title = "!!! ATTENTION !!!"
+        self.title_style = MenuTitleStyle.PLAIN
+        self.title_color = Color.RED
         self.flash_options = FlashOptions()
         self.mcu_list = self.flash_options.mcu_list
         self.input_label_txt = "Select MCU to flash"
@@ -264,14 +277,9 @@ class KlipperSelectMcuIdMenu(BaseMenu):
         }
 
     def print_menu(self) -> None:
-        header = "!!! ATTENTION !!!"
+        header2 = f"[{Color.apply('List of detected MCUs', Color.CYAN)}]"
-        header2 = f"[{COLOR_CYAN}List of detected MCUs{RESET_FORMAT}]"
-        color = COLOR_RED
-        count = 62 - len(color) - len(RESET_FORMAT)
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ Make sure, to select the correct MCU!                 ║
             ║ ONLY flash a firmware created for the respective MCU! ║
@@ -283,7 +291,7 @@ class KlipperSelectMcuIdMenu(BaseMenu):
 
         for i, mcu in enumerate(self.mcu_list):
             mcu = mcu.split("/")[-1]
-            menu += f"║ {i}) {COLOR_CYAN}{mcu:<51}{RESET_FORMAT}║\n"
+            menu += f"║ {i}) {Color.apply(f'{mcu:<51}', Color.CYAN)}║\n"
 
         menu += textwrap.dedent(
             """
@@ -338,7 +346,6 @@ class KlipperSelectSDFlashBoardMenu(BaseMenu):
         else:
             menu = textwrap.dedent(
                 """
-                ╔═══════════════════════════════════════════════════════╗
                 ║ Please select the type of board that corresponds to   ║
                 ║ the currently selected MCU ID you chose before.       ║
                 ║                                                       ║
@@ -390,6 +397,9 @@ class KlipperSelectSDFlashBoardMenu(BaseMenu):
 class KlipperFlashOverviewMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title = "!!! ATTENTION !!!"
+        self.title_style = MenuTitleStyle.PLAIN
+        self.title_color = Color.RED
         self.flash_options = FlashOptions()
         self.input_label_txt = "Perform action (default=Y)"
 
@@ -405,21 +415,17 @@ class KlipperFlashOverviewMenu(BaseMenu):
         self.default_option = Option(self.execute_flash)
 
     def print_menu(self) -> None:
-        header = "!!! ATTENTION !!!"
-        color = COLOR_RED
-        count = 62 - len(color) - len(RESET_FORMAT)
-
         method = self.flash_options.flash_method.value
         command = self.flash_options.flash_command.value
         conn_type = self.flash_options.connection_type.value
         mcu = self.flash_options.selected_mcu.split("/")[-1]
         board = self.flash_options.selected_board
         baudrate = self.flash_options.selected_baudrate
-        subheader = f"[{COLOR_CYAN}Overview{RESET_FORMAT}]"
+        kconfig = Path(self.flash_options.selected_kconfig).name
+        color = Color.CYAN
+        subheader = f"[{Color.apply('Overview', color)}]"
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ Before contuining the flashing process, please check  ║
             ║ if all parameters were set correctly! Once you made   ║
@@ -433,18 +439,25 @@ class KlipperFlashOverviewMenu(BaseMenu):
 
         menu += textwrap.dedent(
             f"""
-            ║ MCU: {COLOR_CYAN}{mcu:<48}{RESET_FORMAT} ║
+            ║ MCU: {Color.apply(f"{mcu:<48}", color)} ║
-            ║ Connection: {COLOR_CYAN}{conn_type:<41}{RESET_FORMAT} ║
+            ║ Connection: {Color.apply(f"{conn_type:<41}", color)} ║
-            ║ Flash method: {COLOR_CYAN}{method:<39}{RESET_FORMAT} ║
+            ║ Flash method: {Color.apply(f"{method:<39}", color)} ║
-            ║ Flash command: {COLOR_CYAN}{command:<38}{RESET_FORMAT} ║
+            ║ Flash command: {Color.apply(f"{command:<38}", color)} ║
             """
         )[1:]
 
         if self.flash_options.flash_method is FlashMethod.SD_CARD:
             menu += textwrap.dedent(
                 f"""
-                ║ Board type: {COLOR_CYAN}{board:<41}{RESET_FORMAT} ║
+                ║ Board type: {Color.apply(f"{board:<41}", color)} ║
-                ║ Baudrate: {COLOR_CYAN}{baudrate:<43}{RESET_FORMAT} ║
+                ║ Baudrate: {Color.apply(f"{baudrate:<43}", color)} ║
+                """
+            )[1:]
+
+        if self.flash_options.flash_method is FlashMethod.REGULAR:
+            menu += textwrap.dedent(
+                f"""
+                ║ Firmware config: {Color.apply(f"{kconfig:<36}", color)} ║
                 """
             )[1:]
 

kiauh/components/klipperscreen/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/components/klipperscreen/klipperscreen.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -30,7 +30,7 @@ from core.constants import SYSTEMD
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
 from core.settings.kiauh_settings import KiauhSettings
-from core.types import ComponentStatus
+from core.types.component_status import ComponentStatus
 from utils.common import (
     check_install_dependencies,
     get_install_status,

kiauh/components/log_uploads/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/components/log_uploads/log_upload_utils.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/components/log_uploads/menus/log_upload_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -12,16 +12,18 @@ import textwrap
 from typing import Type
 
 from components.log_uploads.log_upload_utils import get_logfile_list, upload_logfile
-from core.constants import COLOR_YELLOW, RESET_FORMAT
 from core.logger import Logger
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
+from core.types.color import Color
 
 
 # noinspection PyMethodMayBeStatic
 class LogUploadMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title = "Log Upload"
+        self.title_color = Color.YELLOW
         self.previous_menu: Type[BaseMenu] | None = previous_menu
         self.logfile_list = get_logfile_list()
 
@@ -37,13 +39,8 @@ class LogUploadMenu(BaseMenu):
         }
 
     def print_menu(self) -> None:
-        header = " [ Log Upload ] "
-        color = COLOR_YELLOW
-        count = 62 - len(color) - len(RESET_FORMAT)
         menu = textwrap.dedent(
-            f"""
+            """
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ You can select the following logfiles for uploading:  ║
             ║                                                       ║

kiauh/components/moonraker/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -13,6 +13,8 @@ from core.backup_manager import BACKUP_ROOT_DIR
 
 MODULE_PATH = Path(__file__).resolve().parent
 
+MOONRAKER_REPO_URL = "https://github.com/Arksine/moonraker.git"
+
 # names
 MOONRAKER_CFG_NAME = "moonraker.conf"
 MOONRAKER_LOG_NAME = "moonraker.log"

kiauh/components/moonraker/assets/moonraker.conf

@@ -10,6 +10,7 @@ trusted_clients:
     169.254.0.0/16
     172.16.0.0/12
     192.168.0.0/16
+    FC00::/7
     FE80::/10
     ::1/128
 cors_domains:

kiauh/components/moonraker/menus/moonraker_remove_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -12,15 +12,17 @@ import textwrap
 from typing import Type
 
 from components.moonraker import moonraker_remove
-from core.constants import COLOR_CYAN, COLOR_RED, RESET_FORMAT
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
+from core.types.color import Color
 
 
 # noinspection PyUnusedLocal
 class MoonrakerRemoveMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title = "Remove Moonraker"
+        self.title_color = Color.RED
         self.previous_menu: Type[BaseMenu] | None = previous_menu
         self.remove_moonraker_service = False
         self.remove_moonraker_dir = False
@@ -44,10 +46,7 @@ class MoonrakerRemoveMenu(BaseMenu):
         }
 
     def print_menu(self) -> None:
-        header = " [ Remove Moonraker ] "
+        checked = f"[{Color.apply('x', Color.CYAN)}]"
-        color = COLOR_RED
-        count = 62 - len(color) - len(RESET_FORMAT)
-        checked = f"[{COLOR_CYAN}x{RESET_FORMAT}]"
         unchecked = "[ ]"
         o1 = checked if self.remove_moonraker_service else unchecked
         o2 = checked if self.remove_moonraker_dir else unchecked
@@ -55,8 +54,6 @@ class MoonrakerRemoveMenu(BaseMenu):
         o4 = checked if self.remove_moonraker_polkit else unchecked
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ Enter a number and hit enter to select / deselect     ║
             ║ the specific option for removal.                      ║
@@ -100,8 +97,11 @@ class MoonrakerRemoveMenu(BaseMenu):
             and not self.remove_moonraker_env
             and not self.remove_moonraker_polkit
         ):
-            error = f"{COLOR_RED}Nothing selected! Select options to remove first.{RESET_FORMAT}"
+            print(
-            print(error)
+                Color.apply(
+                    "Nothing selected! Select options to remove first.", Color.RED
+                )
+            )
             return
 
         moonraker_remove.run_moonraker_removal(

kiauh/components/moonraker/moonraker.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/components/moonraker/moonraker_dialogs.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -12,8 +12,8 @@ from typing import List
 
 from components.klipper.klipper import Klipper
 from components.moonraker.moonraker import Moonraker
-from core.constants import COLOR_CYAN, COLOR_GREEN, COLOR_YELLOW, RESET_FORMAT
 from core.menus.base_menu import print_back_footer
+from core.types.color import Color
 
 
 def print_moonraker_overview(
@@ -22,7 +22,7 @@ def print_moonraker_overview(
     show_index=False,
     show_select_all=False,
 ):
-    headline = f"{COLOR_GREEN}The following instances were found:{RESET_FORMAT}"
+    headline = Color.apply("The following instances were found:", Color.GREEN)
     dialog = textwrap.dedent(
         f"""
         ╔═══════════════════════════════════════════════════════╗
@@ -32,7 +32,7 @@ def print_moonraker_overview(
     )[1:]
 
     if show_select_all:
-        select_all = f"{COLOR_YELLOW}a) Select all{RESET_FORMAT}"
+        select_all = Color.apply("a) Select all", Color.YELLOW)
         dialog += f"║ {select_all:<63}║\n"
         dialog += "║                                                       ║\n"
 
@@ -48,12 +48,16 @@ def print_moonraker_overview(
     for i, k in enumerate(instance_map):
         mr_name = instance_map.get(k)
         m = f"<-> {mr_name}" if mr_name != "" else ""
-        line = f"{COLOR_CYAN}{f'{i+1})' if show_index else '●'} {k} {m} {RESET_FORMAT}"
+        line = Color.apply(f"{f'{i+1})' if show_index else '●'} {k} {m}", Color.CYAN)
         dialog += f"║ {line:<63}║\n"
 
-    warn_l1 = f"{COLOR_YELLOW}PLEASE NOTE: {RESET_FORMAT}"
+    warn_l1 = Color.apply("PLEASE NOTE:", Color.YELLOW)
-    warn_l2 = f"{COLOR_YELLOW}If you select an instance with an existing Moonraker{RESET_FORMAT}"
+    warn_l2 = Color.apply(
-    warn_l3 = f"{COLOR_YELLOW}instance, that Moonraker instance will be re-created!{RESET_FORMAT}"
+        "If you select an instance with an existing Moonraker", Color.YELLOW
+    )
+    warn_l3 = Color.apply(
+        "instance, that Moonraker instance will be re-created!", Color.YELLOW
+    )
     warning = textwrap.dedent(
         f"""
         ║                                                       ║

kiauh/components/moonraker/moonraker_remove.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/components/moonraker/moonraker_setup.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -8,7 +8,6 @@
 # ======================================================================= #
 from __future__ import annotations
 
-import json
 import subprocess
 from typing import List
 
@@ -28,9 +27,11 @@ from components.moonraker import (
 )
 from components.moonraker.moonraker import Moonraker
 from components.moonraker.moonraker_dialogs import print_moonraker_overview
-from components.moonraker.moonraker_utils import (
+from components.moonraker.utils.sysdeps_parser import SysDepsParser
+from components.moonraker.utils.utils import (
     backup_moonraker_dir,
     create_example_moonraker_conf,
+    load_sysdeps_json,
 )
 from components.webui_client.client_utils import (
     enable_mainsail_remotemode,
@@ -154,16 +155,24 @@ def setup_moonraker_prerequesites() -> None:
 
 
 def install_moonraker_packages() -> None:
-    moonraker_deps = []
+    Logger.print_status("Parsing Moonraker system dependencies  ...")
 
+    moonraker_deps = []
     if MOONRAKER_DEPS_JSON_FILE.exists():
-        with open(MOONRAKER_DEPS_JSON_FILE, "r") as deps:
+        Logger.print_info(
-            moonraker_deps = json.load(deps).get("debian", [])
+            f"Parsing system dependencies from {MOONRAKER_DEPS_JSON_FILE.name} ...")
+        parser = SysDepsParser()
+        sysdeps = load_sysdeps_json(MOONRAKER_DEPS_JSON_FILE)
+        moonraker_deps.extend(parser.parse_dependencies(sysdeps))
+
     elif MOONRAKER_INSTALL_SCRIPT.exists():
+        Logger.print_warn(f"{MOONRAKER_DEPS_JSON_FILE.name} not found!")
+        Logger.print_info(
+            f"Parsing system dependencies from {MOONRAKER_INSTALL_SCRIPT.name} ...")
         moonraker_deps = parse_packages_from_file(MOONRAKER_INSTALL_SCRIPT)
 
     if not moonraker_deps:
-        raise ValueError("Error reading Moonraker dependencies!")
+        raise ValueError("Error parsing Moonraker dependencies!")
 
     check_install_dependencies({*moonraker_deps})
 

kiauh/components/moonraker/utils/sysdeps_parser.py

@@ -0,0 +1,167 @@
+# ======================================================================= #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#  It was modified by Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  The original file is part of Moonraker:                                #
+#  https://github.com/Arksine/moonraker                                   #
+#  Copyright (C) 2025 Eric Callahan <arksine.code@gmail.com>              #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from __future__ import annotations
+
+import logging
+import pathlib
+import re
+import shlex
+from typing import Any, Dict, List, Tuple
+
+
+def _get_distro_info() -> Dict[str, Any]:
+    release_file = pathlib.Path("/etc/os-release")
+    release_info: Dict[str, str] = {}
+    with release_file.open("r") as f:
+        lexer = shlex.shlex(f, posix=True)
+        lexer.whitespace_split = True
+        for item in list(lexer):
+            if "=" in item:
+                key, val = item.split("=", maxsplit=1)
+                release_info[key] = val
+    return dict(
+        distro_id=release_info.get("ID", ""),
+        distro_version=release_info.get("VERSION_ID", ""),
+        aliases=release_info.get("ID_LIKE", "").split()
+    )
+
+def _convert_version(version: str) -> Tuple[str | int, ...]:
+    version = version.strip()
+    ver_match = re.match(r"\d+(\.\d+)*((?:-|\.).+)?", version)
+    if ver_match is not None:
+        return tuple([
+            int(part) if part.isdigit() else part
+            for part in re.split(r"\.|-", version)
+        ])
+    return (version,)
+
+class SysDepsParser:
+    def __init__(self, distro_info: Dict[str, Any] | None = None) -> None:
+        if distro_info is None:
+            distro_info = _get_distro_info()
+        self.distro_id: str = distro_info.get("distro_id", "")
+        self.aliases: List[str] = distro_info.get("aliases", [])
+        self.distro_version: Tuple[int | str, ...] = tuple()
+        version = distro_info.get("distro_version")
+        if version:
+            self.distro_version = _convert_version(version)
+
+    def _parse_spec(self, full_spec: str) -> str | None:
+        parts = full_spec.split(";", maxsplit=1)
+        if len(parts) == 1:
+            return full_spec
+        pkg_name = parts[0].strip()
+        expressions = re.split(r"( and | or )", parts[1].strip())
+        if not len(expressions) & 1:
+            # There should always be an odd number of expressions.  Each
+            # expression is separated by an "and" or "or" operator
+            logging.info(
+                f"Requirement specifier is missing an expression "
+                f"between logical operators : {full_spec}"
+            )
+            return None
+        last_result: bool = True
+        last_logical_op: str | None = "and"
+        for idx, exp in enumerate(expressions):
+            if idx & 1:
+                if last_logical_op is not None:
+                    logging.info(
+                        "Requirement specifier contains sequential logical "
+                        f"operators: {full_spec}"
+                    )
+                    return None
+                logical_op = exp.strip()
+                if logical_op not in ("and", "or"):
+                    logging.info(
+                        f"Invalid logical operator {logical_op} in requirement "
+                        f"specifier: {full_spec}")
+                    return None
+                last_logical_op = logical_op
+                continue
+            elif last_logical_op is None:
+                logging.info(
+                    f"Requirement specifier contains two seqential expressions "
+                    f"without a logical operator: {full_spec}")
+                return None
+            dep_parts = re.split(r"(==|!=|<=|>=|<|>)", exp.strip())
+            req_var = dep_parts[0].strip().lower()
+            if len(dep_parts) != 3:
+                logging.info(f"Invalid comparison, must be 3 parts: {full_spec}")
+                return None
+            elif req_var == "distro_id":
+                left_op: str | Tuple[int | str, ...] = self.distro_id
+                right_op = dep_parts[2].strip().strip("\"'")
+            elif req_var == "distro_version":
+                if not self.distro_version:
+                    logging.info(
+                        "Distro Version not detected, cannot satisfy requirement: "
+                        f"{full_spec}"
+                    )
+                    return None
+                left_op = self.distro_version
+                right_op = _convert_version(dep_parts[2].strip().strip("\"'"))
+            else:
+                logging.info(f"Invalid requirement specifier: {full_spec}")
+                return None
+            operator = dep_parts[1].strip()
+            try:
+                compfunc = {
+                    "<": lambda x, y: x < y,
+                    ">": lambda x, y: x > y,
+                    "==": lambda x, y: x == y,
+                    "!=": lambda x, y: x != y,
+                    ">=": lambda x, y: x >= y,
+                    "<=": lambda x, y: x <= y
+                }.get(operator, lambda x, y: False)
+                result = compfunc(left_op, right_op)
+                if last_logical_op == "and":
+                    last_result &= result
+                else:
+                    last_result |= result
+                last_logical_op = None
+            except Exception:
+                logging.exception(f"Error comparing requirements: {full_spec}")
+                return None
+        if last_result:
+            return pkg_name
+        return None
+
+    def parse_dependencies(self, sys_deps: Dict[str, List[str]]) -> List[str]:
+        if not self.distro_id:
+            logging.info(
+                "Failed to detect current distro ID, cannot parse dependencies"
+            )
+            return []
+        all_ids = [self.distro_id] + self.aliases
+        for distro_id in all_ids:
+            if distro_id in sys_deps:
+                if not sys_deps[distro_id]:
+                    logging.info(
+                        f"Dependency data contains an empty package definition "
+                        f"for linux distro '{distro_id}'"
+                    )
+                    continue
+                processed_deps: List[str] = []
+                for dep in sys_deps[distro_id]:
+                    parsed_dep = self._parse_spec(dep)
+                    if parsed_dep is not None:
+                        processed_deps.append(parsed_dep)
+                return processed_deps
+        else:
+            logging.info(
+                f"Dependency data has no package definition for linux "
+                f"distro '{self.distro_id}'"
+            )
+        return []

kiauh/components/moonraker/utils/utils.py

@@ -1,13 +1,14 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
 #                                                                         #
 #  This file may be distributed under the terms of the GNU GPLv3 license  #
 # ======================================================================= #
-
+import json
 import shutil
+from pathlib import Path
 from typing import Dict, List, Optional
 
 from components.moonraker import (
@@ -25,7 +26,7 @@ from core.logger import Logger
 from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
     SimpleConfigParser,
 )
-from core.types import ComponentStatus
+from core.types.component_status import ComponentStatus
 from utils.common import get_install_status
 from utils.instance_utils import get_instances
 from utils.sys_utils import (
@@ -138,3 +139,12 @@ def backup_moonraker_db_dir() -> None:
         bm.backup_directory(
             name, source=instance.db_dir, target=MOONRAKER_DB_BACKUP_DIR
         )
+
+def load_sysdeps_json(file: Path) -> Dict[str, List[str]]:
+    try:
+        sysdeps: Dict[str, List[str]] = json.loads(file.read_bytes())
+    except json.JSONDecodeError as e:
+        Logger.print_error(f"Unable to parse {file.name}:\n{e}")
+        return {}
+    else:
+        return sysdeps

kiauh/components/webui_client/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/components/webui_client/base_data.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -37,6 +37,7 @@ class BaseWebClient(ABC):
     backup_dir: Path
     repo_path: str
     download_url: str
+    nginx_config: Path
     nginx_access_log: Path
     nginx_error_log: Path
     client_config: BaseWebClientConfig

kiauh/components/webui_client/client_config/client_config_remove.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -14,8 +14,11 @@ from components.klipper.klipper import Klipper
 from components.moonraker.moonraker import Moonraker
 from components.webui_client.base_data import BaseWebClientConfig
 from core.logger import Logger
+from core.services.message_service import Message
+from core.types.color import Color
 from utils.config_utils import remove_config_section
 from utils.fs_utils import run_remove_routines
+from utils.instance_type import InstanceType
 from utils.instance_utils import get_instances
 
 
@@ -23,21 +26,66 @@ def run_client_config_removal(
     client_config: BaseWebClientConfig,
     kl_instances: List[Klipper],
     mr_instances: List[Moonraker],
-) -> None:
+) -> Message:
-    remove_client_config_dir(client_config)
+    completion_msg = Message(
-    remove_client_config_symlink(client_config)
+        title=f"{client_config.display_name} Removal Process completed",
-    remove_config_section(f"update_manager {client_config.name}", mr_instances)
+        color=Color.GREEN,
-    remove_config_section(client_config.config_section, kl_instances)
+    )
-
-
-def remove_client_config_dir(client_config: BaseWebClientConfig) -> None:
     Logger.print_status(f"Removing {client_config.display_name} ...")
-    run_remove_routines(client_config.config_dir)
+    if run_remove_routines(client_config.config_dir):
+        completion_msg.text.append(f"● {client_config.display_name} removed")
+
+    completion_msg = remove_moonraker_config_section(
+        completion_msg, client_config, mr_instances
+    )
+
+    completion_msg = remove_printer_config_section(
+        completion_msg, client_config, kl_instances
+    )
+
+    if completion_msg.text:
+        completion_msg.text.insert(0, "The following actions were performed:")
+    else:
+        completion_msg.color = Color.YELLOW
+        completion_msg.centered = True
+        completion_msg.text = ["Nothing to remove."]
+
+    return completion_msg
 
 
-def remove_client_config_symlink(client_config: BaseWebClientConfig) -> None:
+def remove_cfg_symlink(client_config: BaseWebClientConfig, message: Message) -> Message:
     instances: List[Klipper] = get_instances(Klipper)
+    kl_instances = []
     for instance in instances:
-        run_remove_routines(
+        cfg = instance.base.cfg_dir.joinpath(client_config.config_filename)
-            instance.base.cfg_dir.joinpath(client_config.config_filename)
+        if run_remove_routines(cfg):
-        )
+            kl_instances.append(instance)
+    text = f"{client_config.display_name} removed from instance"
+    return update_msg(kl_instances, message, text)
+
+
+def remove_printer_config_section(
+    message: Message, client_config: BaseWebClientConfig, kl_instances: List[Klipper]
+) -> Message:
+    kl_section = client_config.config_section
+    kl_instances = remove_config_section(kl_section, kl_instances)
+    text = f"Klipper config section '{kl_section}' removed for instance"
+    return update_msg(kl_instances, message, text)
+
+
+def remove_moonraker_config_section(
+    message: Message, client_config: BaseWebClientConfig, mr_instances: List[Moonraker]
+) -> Message:
+    mr_section = f"update_manager {client_config.name}"
+    mr_instances = remove_config_section(mr_section, mr_instances)
+    text = f"Moonraker config section '{mr_section}' removed for instance"
+    return update_msg(mr_instances, message, text)
+
+
+def update_msg(instances: List[InstanceType], message: Message, text: str) -> Message:
+    if not instances:
+        return message
+
+    instance_names = [i.service_file_path.stem for i in instances]
+    message.text.append(f"● {text}: {', '.join(instance_names)}")
+    return message

kiauh/components/webui_client/client_config/client_config_setup.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -34,7 +34,7 @@ from utils.input_utils import get_confirm
 from utils.instance_utils import get_instances
 
 
-def install_client_config(client_data: BaseWebClient) -> None:
+def install_client_config(client_data: BaseWebClient, cfg_backup=True) -> None:
     client_config: BaseWebClientConfig = client_data.client_config
     display_name = client_config.display_name
 
@@ -56,7 +56,8 @@ def install_client_config(client_data: BaseWebClient) -> None:
         download_client_config(client_config)
         create_client_config_symlink(client_config, kl_instances)
 
-        backup_printer_config_dir()
+        if cfg_backup:
+            backup_printer_config_dir()
 
         add_config_section(
             section=f"update_manager {client_config.name}",

kiauh/components/webui_client/client_dialogs.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -13,15 +13,15 @@ from components.webui_client.base_data import BaseWebClient
 from core.logger import DialogType, Logger
 
 
-def print_moonraker_not_found_dialog() -> None:
+def print_moonraker_not_found_dialog(name: str) -> None:
     Logger.print_dialog(
         DialogType.WARNING,
         [
             "No local Moonraker installation was found!",
             "\n\n",
-            "It is possible to install Mainsail without a local Moonraker installation. "
+            f"It is possible to install {name} without a local Moonraker installation. "
             "If you continue, you need to make sure, that Moonraker is installed on "
-            "another machine in your network. Otherwise Mainsail will NOT work "
+            f"another machine in your network. Otherwise {name} will NOT work "
             "correctly.",
         ],
     )
@@ -40,20 +40,25 @@ def print_client_already_installed_dialog(name: str) -> None:
 def print_client_port_select_dialog(
     name: str, port: int, ports_in_use: List[int]
 ) -> None:
-    Logger.print_dialog(
+    dialog_content: List[str] = [
-        DialogType.CUSTOM,
+        f"Please select the port, {name} should be served on. If your are unsure "
-        [
+        f"what to select, hit Enter to apply the suggested value of: {port}",
-            f"Please select the port, {name} should be served on. If your are unsure "
+        "\n\n",
-            f"what to select, hit Enter to apply the suggested value of: {port}",
+        f"In case you need {name} to be served on a specific port, you can set it "
-            "\n\n",
+        f"now. Make sure that the port is not already used by another application "
-            f"In case you need {name} to be served on a specific port, you can set it "
+        f"on your system!",
-            f"now. Make sure that the port is not already used by another application "
+    ]
-            f"on your system!",
+
-            "\n\n",
+    if ports_in_use:
-            "The following ports were found to be in use already:",
+        dialog_content.extend(
-            *[f"● {port}" for port in ports_in_use],
+            [
-        ],
+                "\n\n",
-    )
+                "The following ports were found to be already in use:",
+                *[f"● {p}" for p in ports_in_use if p != port],
+            ]
+        )
+
+    Logger.print_dialog(DialogType.CUSTOM, dialog_content)
 
 
 def print_install_client_config_dialog(client: BaseWebClient) -> None:

kiauh/components/webui_client/client_remove.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -19,6 +19,8 @@ from components.webui_client.client_config.client_config_remove import (
 from core.backup_manager.backup_manager import BackupManager
 from core.constants import NGINX_SITES_AVAILABLE, NGINX_SITES_ENABLED
 from core.logger import Logger
+from core.services.message_service import Message
+from core.types.color import Color
 from utils.config_utils import remove_config_section
 from utils.fs_utils import (
     remove_with_sudo,
@@ -32,54 +34,79 @@ def run_client_removal(
     remove_client: bool,
     remove_client_cfg: bool,
     backup_config: bool,
-) -> None:
+) -> Message:
+    completion_msg = Message(
+        title=f"{client.display_name} Removal Process completed",
+        color=Color.GREEN,
+    )
     mr_instances: List[Moonraker] = get_instances(Moonraker)
     kl_instances: List[Klipper] = get_instances(Klipper)
 
     if backup_config:
         bm = BackupManager()
-        bm.backup_file(client.config_file)
+        if bm.backup_file(client.config_file):
+            completion_msg.text.append(f"● {client.config_file.name} backup created")
 
     if remove_client:
         client_name = client.name
-        remove_client_dir(client)
+        if remove_client_dir(client):
-        remove_client_nginx_config(client_name)
+            completion_msg.text.append(f"● {client.display_name} removed")
-        remove_client_nginx_logs(client, kl_instances)
+        if remove_client_nginx_config(client_name):
+            completion_msg.text.append("● NGINX config removed")
+        if remove_client_nginx_logs(client, kl_instances):
+            completion_msg.text.append("● NGINX logs removed")
 
         section = f"update_manager {client_name}"
-        remove_config_section(section, mr_instances)
+        handled_instances: List[Moonraker] = remove_config_section(
+            section, mr_instances
+        )
+        if handled_instances:
+            names = [i.service_file_path.stem for i in handled_instances]
+            completion_msg.text.append(
+                f"● Moonraker config section '{section}' removed for instance: {', '.join(names)}"
+            )
 
     if remove_client_cfg:
-        run_client_config_removal(
+        cfg_completion_msg = run_client_config_removal(
             client.client_config,
             kl_instances,
             mr_instances,
         )
+        if cfg_completion_msg.color == Color.GREEN:
+            completion_msg.text.extend(cfg_completion_msg.text[1:])
+
+    if not completion_msg.text:
+        completion_msg.color = Color.YELLOW
+        completion_msg.centered = True
+        completion_msg.text.append("Nothing to remove.")
+    else:
+        completion_msg.text.insert(0, "The following actions were performed:")
+
+    return completion_msg
 
 
-def remove_client_dir(client: BaseWebClient) -> None:
+def remove_client_dir(client: BaseWebClient) -> bool:
     Logger.print_status(f"Removing {client.display_name} ...")
-    run_remove_routines(client.client_dir)
+    return run_remove_routines(client.client_dir)
 
 
-def remove_client_nginx_config(name: str) -> None:
+def remove_client_nginx_config(name: str) -> bool:
     Logger.print_status(f"Removing NGINX config for {name.capitalize()} ...")
-
+    return remove_with_sudo(
-    remove_with_sudo(NGINX_SITES_AVAILABLE.joinpath(name))
+        [
-    remove_with_sudo(NGINX_SITES_ENABLED.joinpath(name))
+            NGINX_SITES_AVAILABLE.joinpath(name),
+            NGINX_SITES_ENABLED.joinpath(name),
+        ]
+    )
 
 
-def remove_client_nginx_logs(client: BaseWebClient, instances: List[Klipper]) -> None:
+def remove_client_nginx_logs(client: BaseWebClient, instances: List[Klipper]) -> bool:
     Logger.print_status(f"Removing NGINX logs for {client.display_name} ...")
 
-    remove_with_sudo(client.nginx_access_log)
+    files = [client.nginx_access_log, client.nginx_error_log]
-    remove_with_sudo(client.nginx_error_log)
+    if instances:
+        for instance in instances:
+            files.append(instance.base.log_dir.joinpath(client.nginx_access_log.name))
+            files.append(instance.base.log_dir.joinpath(client.nginx_error_log.name))
 
-    if not instances:
+    return remove_with_sudo(files)
-        return
-
-    for instance in instances:
-        run_remove_routines(
-            instance.base.log_dir.joinpath(client.nginx_access_log.name)
-        )
-        run_remove_routines(instance.base.log_dir.joinpath(client.nginx_error_log.name))

kiauh/components/webui_client/client_setup.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -23,7 +23,6 @@ from components.webui_client.client_config.client_config_setup import (
     install_client_config,
 )
 from components.webui_client.client_dialogs import (
-    print_client_port_select_dialog,
     print_install_client_config_dialog,
     print_moonraker_not_found_dialog,
 )
@@ -33,18 +32,17 @@ from components.webui_client.client_utils import (
     create_nginx_cfg,
     detect_client_cfg_conflict,
     enable_mainsail_remotemode,
-    get_next_free_port,
+    get_client_port_selection,
-    is_valid_port,
-    read_ports_from_nginx_configs,
     symlink_webui_nginx_log,
 )
 from core.instance_manager.instance_manager import InstanceManager
-from core.logger import Logger
+from core.logger import DialogType, Logger
 from core.settings.kiauh_settings import KiauhSettings
-from utils.common import check_install_dependencies
+from core.types.color import Color
+from utils.common import backup_printer_config_dir, check_install_dependencies
 from utils.config_utils import add_config_section
 from utils.fs_utils import unzip
-from utils.input_utils import get_confirm, get_number_input
+from utils.input_utils import get_confirm
 from utils.instance_utils import get_instances
 from utils.sys_utils import (
     cmd_sysctl_service,
@@ -53,21 +51,16 @@ from utils.sys_utils import (
 )
 
 
-def install_client(client: BaseWebClient) -> None:
+def install_client(
-    if client is None:
+    client: BaseWebClient,
-        raise ValueError("Missing parameter client_data!")
+    settings: KiauhSettings,
-
+    reinstall: bool = False,
-    if client.client_dir.exists():
+) -> None:
-        Logger.print_info(
-            f"{client.display_name} seems to be already installed! Skipped ..."
-        )
-        return
-
     mr_instances: List[Moonraker] = get_instances(Moonraker)
 
     enable_remotemode = False
     if not mr_instances:
-        print_moonraker_not_found_dialog()
+        print_moonraker_not_found_dialog(client.display_name)
         if not get_confirm(f"Continue {client.display_name} installation?"):
             return
 
@@ -92,21 +85,10 @@ def install_client(client: BaseWebClient) -> None:
         question = f"Download the recommended {client_config.display_name}?"
         install_client_cfg = get_confirm(question, allow_go_back=False)
 
-    settings = KiauhSettings()
+    default_port: int = int(settings.get(client.name, "port"))
-    port: int = settings.get(client.name, "port")
+    port: int = (
-    ports_in_use: List[int] = read_ports_from_nginx_configs()
+        default_port if reinstall else get_client_port_selection(client, settings)
-
+    )
-    # check if configured port is a valid number and not in use already
-    valid_port = is_valid_port(port, ports_in_use)
-    while not valid_port:
-        next_port = get_next_free_port(ports_in_use)
-        print_client_port_select_dialog(client.display_name, next_port, ports_in_use)
-        port = get_number_input(
-            f"Configure {client.display_name} for port",
-            min_count=int(next_port),
-            default=next_port,
-        )
-        valid_port = is_valid_port(port, ports_in_use)
 
     check_install_dependencies({"nginx"})
 
@@ -114,20 +96,22 @@ def install_client(client: BaseWebClient) -> None:
         download_client(client)
         if enable_remotemode and client.client == WebClientType.MAINSAIL:
             enable_mainsail_remotemode()
-        if mr_instances:
+
-            add_config_section(
+        backup_printer_config_dir()
-                section=f"update_manager {client.name}",
+        add_config_section(
-                instances=mr_instances,
+            section=f"update_manager {client.name}",
-                options=[
+            instances=mr_instances,
-                    ("type", "web"),
+            options=[
-                    ("channel", "stable"),
+                ("type", "web"),
-                    ("repo", str(client.repo_path)),
+                ("channel", "stable"),
-                    ("path", str(client.client_dir)),
+                ("repo", str(client.repo_path)),
-                ],
+                ("path", str(client.client_dir)),
-            )
+            ],
-            InstanceManager.restart_all(mr_instances)
+        )
+        InstanceManager.restart_all(mr_instances)
+
         if install_client_cfg and kl_instances:
-            install_client_config(client)
+            install_client_config(client, False)
 
         copy_upstream_nginx_cfg()
         copy_common_vars_nginx_cfg()
@@ -145,12 +129,24 @@ def install_client(client: BaseWebClient) -> None:
         cmd_sysctl_service("nginx", "restart")
 
     except Exception as e:
-        Logger.print_error(f"{client.display_name} installation failed!\n{e}")
+        Logger.print_error(e)
+        Logger.print_dialog(
+            DialogType.ERROR,
+            center_content=True,
+            content=[f"{client.display_name} installation failed!"],
+        )
         return
 
-    log = f"Open {client.display_name} now on: http://{get_ipv4_addr()}:{port}"
+    # noinspection HttpUrlsUsage
-    Logger.print_ok(f"{client.display_name} installation complete!", start="\n")
+    Logger.print_dialog(
-    Logger.print_ok(log, prefix=False, end="\n\n")
+        DialogType.CUSTOM,
+        custom_title=f"{client.display_name} installation complete!",
+        custom_color=Color.GREEN,
+        center_content=True,
+        content=[
+            f"Open {client.display_name} now on: http://{get_ipv4_addr()}{'' if port == 80 else f':{port}'}",
+        ],
+    )
 
 
 def download_client(client: BaseWebClient) -> None:

kiauh/components/webui_client/client_utils.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -21,29 +21,29 @@ from components.webui_client.base_data import (
     BaseWebClient,
     WebClientType,
 )
+from components.webui_client.client_dialogs import print_client_port_select_dialog
 from components.webui_client.fluidd_data import FluiddData
 from components.webui_client.mainsail_data import MainsailData
 from core.backup_manager.backup_manager import BackupManager
 from core.constants import (
-    COLOR_CYAN,
-    COLOR_YELLOW,
     NGINX_CONFD,
     NGINX_SITES_AVAILABLE,
     NGINX_SITES_ENABLED,
-    RESET_FORMAT,
 )
 from core.logger import Logger
-from core.settings.kiauh_settings import KiauhSettings
+from core.settings.kiauh_settings import KiauhSettings, WebUiSettings
 from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
     SimpleConfigParser,
 )
-from core.types import ComponentStatus
+from core.types.color import Color
+from core.types.component_status import ComponentStatus
 from utils.common import get_install_status
 from utils.fs_utils import create_symlink, remove_file
 from utils.git_utils import (
     get_latest_remote_tag,
     get_latest_unstable_tag,
 )
+from utils.input_utils import get_number_input
 from utils.instance_utils import get_instances
 
 
@@ -77,10 +77,10 @@ def get_current_client_config() -> str:
     installed = [c for c in clients if c.client_config.config_dir.exists()]
 
     if not installed:
-        return f"{COLOR_CYAN}-{RESET_FORMAT}"
+        return Color.apply("-", Color.CYAN)
     elif len(installed) == 1:
         cfg = installed[0].client_config
-        return f"{COLOR_CYAN}{cfg.display_name}{RESET_FORMAT}"
+        return Color.apply(cfg.display_name, Color.CYAN)
 
     # at this point, both client config folders exists, so we need to check
     # which are actually included in the printer.cfg of all klipper instances
@@ -99,18 +99,18 @@ def get_current_client_config() -> str:
 
         # if both are included in the same file, we have a potential conflict
         if includes_mainsail and includes_fluidd:
-            return f"{COLOR_YELLOW}Conflict!{RESET_FORMAT}"
+            return Color.apply("Conflict", Color.YELLOW)
 
     if not mainsail_includes and not fluidd_includes:
         # there are no includes at all, even though the client config folders exist
-        return f"{COLOR_CYAN}-{RESET_FORMAT}"
+        return Color.apply("-", Color.CYAN)
     elif len(fluidd_includes) > len(mainsail_includes):
         # there are more instances that include fluidd than mainsail
-        return f"{COLOR_CYAN}{fluidd.client_config.display_name}{RESET_FORMAT}"
+        return Color.apply(fluidd.client_config.display_name, Color.CYAN)
     else:
         # there are the same amount of non-conflicting includes for each config
         # or more instances include mainsail than fluidd
-        return f"{COLOR_CYAN}{mainsail.client_config.display_name}{RESET_FORMAT}"
+        return Color.apply(mainsail.client_config.display_name, Color.CYAN)
 
 
 def enable_mainsail_remotemode() -> None:
@@ -336,34 +336,94 @@ def create_nginx_cfg(
         raise
 
 
+def get_nginx_config_list() -> List[Path]:
+    """
+    Get a list of all NGINX config files in /etc/nginx/sites-enabled
+    :return: List of NGINX config files
+    """
+    configs: List[Path] = []
+    for config in NGINX_SITES_ENABLED.iterdir():
+        if not config.is_file():
+            continue
+        configs.append(config)
+    return configs
+
+
+def get_nginx_listen_port(config: Path) -> int | None:
+    """
+    Get the listen port from an NGINX config file
+    :param config: The NGINX config file to read the port from
+    :return: The listen port as int or None if not found/parsable
+    """
+
+    # noinspection HttpUrlsUsage
+    pattern = r"default_server|http://|https://|[;\[\]]"
+    port = ""
+    with open(config, "r") as cfg:
+        for line in cfg.readlines():
+            line = re.sub(pattern, "", line.strip())
+            if line.startswith("listen"):
+                if ":" not in line:
+                    port = line.split()[-1]
+                else:
+                    port = line.split(":")[-1]
+        try:
+            return int(port)
+        except ValueError:
+            Logger.print_error(
+                f"Unable to parse listen port {port} from {config.name}!"
+            )
+            return None
+
+
 def read_ports_from_nginx_configs() -> List[int]:
     """
-    Helper function to iterate over all NGINX configs and read all ports defined for listen
+    Helper function to iterate over all NGINX configs
+    and read all ports defined for listen
     :return: A sorted list of listen ports
     """
     if not NGINX_SITES_ENABLED.exists():
         return []
 
-    port_list = []
+    port_list: List[int] = []
-    for config in NGINX_SITES_ENABLED.iterdir():
+    for config in get_nginx_config_list():
-        if not config.is_file():
+        port = get_nginx_listen_port(config)
-            continue
+        if port is not None:
+            port_list.append(port)
 
-        with open(config, "r") as cfg:
+    return sorted(port_list, key=lambda x: int(x))
-            lines = cfg.readlines()
-
-        for line in lines:
-            line = line.replace("default_server", "")
-            line = re.sub(r"[;:\[\]]", "", line.strip())
-            if line.startswith("listen") and line.split()[-1] not in port_list:
-                port_list.append(line.split()[-1])
-
-    ports_to_ints_list = [int(port) for port in port_list]
-    return sorted(ports_to_ints_list, key=lambda x: int(x))
 
 
-def is_valid_port(port: int, ports_in_use: List[int]) -> bool:
+def get_client_port_selection(
-    return port not in ports_in_use
+    client: BaseWebClient,
+    settings: KiauhSettings,
+    reconfigure=False,
+) -> int:
+    default_port: int = int(settings.get(client.name, "port"))
+    ports_in_use: List[int] = read_ports_from_nginx_configs()
+    next_free_port: int = get_next_free_port(ports_in_use)
+
+    port: int = (
+        next_free_port
+        if not reconfigure and default_port in ports_in_use
+        else default_port
+    )
+
+    print_client_port_select_dialog(client.display_name, port, ports_in_use)
+
+    while True:
+        _type = "Reconfigure" if reconfigure else "Configure"
+        question = f"{_type} {client.display_name} for port"
+        port_input = get_number_input(question, min_count=80, default=port)
+
+        if port_input not in ports_in_use:
+            client_settings: WebUiSettings = settings[client.name]
+            client_settings.port = port_input
+            settings.save()
+
+            return port_input
+
+        Logger.print_error("This port is already in use. Please select another one.")
 
 
 def get_next_free_port(ports_in_use: List[int]) -> int:
@@ -371,3 +431,23 @@ def get_next_free_port(ports_in_use: List[int]) -> int:
     used_ports = set(map(int, ports_in_use))
 
     return min(valid_ports - used_ports)
+
+
+def set_listen_port(client: BaseWebClient, curr_port: int, new_port: int) -> None:
+    """
+    Set the port the client should listen on in the NGINX config
+    :param curr_port: The current port the client listens on
+    :param new_port: The new port to set
+    :param client: The client to set the port for
+    :return: None
+    """
+    config = NGINX_SITES_AVAILABLE.joinpath(client.name)
+    with open(config, "r") as f:
+        lines = f.readlines()
+
+    for i, line in enumerate(lines):
+        if "listen" in line:
+            lines[i] = line.replace(str(curr_port), str(new_port))
+
+    with open(config, "w") as f:
+        f.writelines(lines)

kiauh/components/webui_client/fluidd_data.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -19,6 +19,7 @@ from components.webui_client.base_data import (
     WebClientType,
 )
 from core.backup_manager import BACKUP_ROOT_DIR
+from core.constants import NGINX_SITES_AVAILABLE
 
 
 @dataclass()
@@ -44,6 +45,7 @@ class FluiddData(BaseWebClient):
     config_file: Path = client_dir.joinpath("config.json")
     backup_dir: Path = BACKUP_ROOT_DIR.joinpath("fluidd-backups")
     repo_path: str = "fluidd-core/fluidd"
+    nginx_config: Path = NGINX_SITES_AVAILABLE.joinpath("fluidd")
     nginx_access_log: Path = Path("/var/log/nginx/fluidd-access.log")
     nginx_error_log: Path = Path("/var/log/nginx/fluidd-error.log")
     client_config: BaseWebClientConfig = None

kiauh/components/webui_client/mainsail_data.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -19,6 +19,7 @@ from components.webui_client.base_data import (
     WebClientType,
 )
 from core.backup_manager import BACKUP_ROOT_DIR
+from core.constants import NGINX_SITES_AVAILABLE
 
 
 @dataclass()
@@ -44,6 +45,7 @@ class MainsailData(BaseWebClient):
     config_file: Path = client_dir.joinpath("config.json")
     backup_dir: Path = BACKUP_ROOT_DIR.joinpath("mainsail-backups")
     repo_path: str = "mainsail-crew/mainsail"
+    nginx_config: Path = NGINX_SITES_AVAILABLE.joinpath("mainsail")
     nginx_access_log: Path = Path("/var/log/nginx/mainsail-access.log")
     nginx_error_log: Path = Path("/var/log/nginx/mainsail-error.log")
     client_config: BaseWebClientConfig = None

kiauh/components/webui_client/menus/client_install_menu.py

@@ -0,0 +1,105 @@
+# ======================================================================= #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from __future__ import annotations
+
+import textwrap
+from typing import Type
+
+from components.webui_client.base_data import BaseWebClient
+from components.webui_client.client_setup import install_client
+from components.webui_client.client_utils import (
+    get_client_port_selection,
+    get_nginx_listen_port,
+    set_listen_port,
+)
+from core.logger import Logger
+from core.menus import Option
+from core.menus.base_menu import BaseMenu
+from core.services.message_service import Message
+from core.settings.kiauh_settings import KiauhSettings, WebUiSettings
+from core.types.color import Color
+from utils.sys_utils import cmd_sysctl_service, get_ipv4_addr
+
+
+# noinspection PyUnusedLocal
+class ClientInstallMenu(BaseMenu):
+    def __init__(
+        self, client: BaseWebClient, previous_menu: Type[BaseMenu] | None = None
+    ):
+        super().__init__()
+        self.title = f"Installation Menu > {client.display_name}"
+        self.title_color = Color.GREEN
+        self.previous_menu: Type[BaseMenu] | None = previous_menu
+        self.client: BaseWebClient = client
+        self.settings = KiauhSettings()
+        self.client_settings: WebUiSettings = self.settings[client.name]
+
+    def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
+        from core.menus.install_menu import InstallMenu
+
+        self.previous_menu = previous_menu if previous_menu is not None else InstallMenu
+
+    def set_options(self) -> None:
+        self.options = {
+            "1": Option(method=self.reinstall_client),
+            "2": Option(method=self.change_listen_port),
+        }
+
+    def print_menu(self) -> None:
+        client_name = self.client.display_name
+        port = f"(Current: {Color.apply(self._get_current_port(), Color.GREEN)})"
+        menu = textwrap.dedent(
+            f"""
+            ╟───────────────────────────────────────────────────────╢
+            ║  1) Reinstall {client_name:16}                        ║
+            ║  2) Reconfigure Listen Port {port:<34} ║
+            ╟───────────────────────────────────────────────────────╢
+            """
+        )[1:]
+        print(menu, end="")
+
+    def reinstall_client(self, **kwargs) -> None:
+        install_client(self.client, settings=self.settings, reinstall=True)
+
+    def change_listen_port(self, **kwargs) -> None:
+        curr_port = self._get_current_port()
+        new_port = get_client_port_selection(
+            self.client,
+            self.settings,
+            reconfigure=True,
+        )
+
+        cmd_sysctl_service("nginx", "stop")
+        set_listen_port(self.client, curr_port, new_port)
+
+        Logger.print_status("Saving new port configuration ...")
+        self.client_settings.port = new_port
+        self.settings.save()
+        Logger.print_ok("Port configuration saved!")
+
+        cmd_sysctl_service("nginx", "start")
+
+        # noinspection HttpUrlsUsage
+        message = Message(
+            title="Port reconfiguration complete!",
+            text=[
+                f"Open {self.client.display_name} now on: "
+                f"http://{get_ipv4_addr()}:{new_port}",
+            ],
+            color=Color.GREEN,
+        )
+        self.message_service.set_message(message)
+
+    def _get_current_port(self) -> int:
+        curr_port = get_nginx_listen_port(self.client.nginx_config)
+        if curr_port is None:
+            # if the port is not found in the config file we use
+            # the default port from the kiauh settings as fallback
+            return int(self.client_settings.port)
+        return curr_port

kiauh/components/webui_client/menus/client_remove_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -13,9 +13,9 @@ from typing import Type
 
 from components.webui_client import client_remove
 from components.webui_client.base_data import BaseWebClient
-from core.constants import COLOR_CYAN, COLOR_RED, RESET_FORMAT
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
+from core.types.color import Color
 
 
 # noinspection PyUnusedLocal
@@ -24,12 +24,14 @@ class ClientRemoveMenu(BaseMenu):
         self, client: BaseWebClient, previous_menu: Type[BaseMenu] | None = None
     ):
         super().__init__()
+        self.title = f"Remove {client.display_name}"
+        self.title_color = Color.RED
         self.previous_menu: Type[BaseMenu] | None = previous_menu
         self.client: BaseWebClient = client
         self.remove_client: bool = False
         self.remove_client_cfg: bool = False
         self.backup_config_json: bool = False
-        self.selection_state: bool = False
+        self.select_state: bool = False
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
         from core.menus.remove_menu import RemoveMenu
@@ -50,23 +52,19 @@ class ClientRemoveMenu(BaseMenu):
         client_config = self.client.client_config
         client_config_name = client_config.display_name
 
-        header = f" [ Remove {client_name} ] "
+        checked = f"[{Color.apply('x', Color.CYAN)}]"
-        color = COLOR_RED
-        count = 62 - len(color) - len(RESET_FORMAT)
-        checked = f"[{COLOR_CYAN}x{RESET_FORMAT}]"
         unchecked = "[ ]"
         o1 = checked if self.remove_client else unchecked
         o2 = checked if self.remove_client_cfg else unchecked
         o3 = checked if self.backup_config_json else unchecked
+        sel_state = f"{'Select'if not self.select_state else 'Deselect'} everything"
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ Enter a number and hit enter to select / deselect     ║
             ║ the specific option for removal.                      ║
             ╟───────────────────────────────────────────────────────╢
-            ║  a) {self._get_selection_state_str():37}             ║
+            ║  a) {sel_state:49} ║
             ╟───────────────────────────────────────────────────────╢
             ║  1) {o1} Remove {client_name:16}                       ║
             ║  2) {o2} Remove {client_config_name:24}               ║
@@ -79,10 +77,10 @@ class ClientRemoveMenu(BaseMenu):
         print(menu, end="")
 
     def toggle_all(self, **kwargs) -> None:
-        self.selection_state = not self.selection_state
+        self.select_state = not self.select_state
-        self.remove_client = self.selection_state
+        self.remove_client = self.select_state
-        self.remove_client_cfg = self.selection_state
+        self.remove_client_cfg = self.select_state
-        self.backup_config_json = self.selection_state
+        self.backup_config_json = self.select_state
 
     def toggle_rm_client(self, **kwargs) -> None:
         self.remove_client = not self.remove_client
@@ -99,28 +97,18 @@ class ClientRemoveMenu(BaseMenu):
             and not self.remove_client_cfg
             and not self.backup_config_json
         ):
-            error = f"{COLOR_RED}Nothing selected ...{RESET_FORMAT}"
+            print(Color.apply("Nothing selected ...", Color.RED))
-            print(error)
             return
 
-        client_remove.run_client_removal(
+        completion_msg = client_remove.run_client_removal(
             client=self.client,
             remove_client=self.remove_client,
             remove_client_cfg=self.remove_client_cfg,
             backup_config=self.backup_config_json,
         )
+        self.message_service.set_message(completion_msg)
 
         self.remove_client = False
         self.remove_client_cfg = False
         self.backup_config_json = False
-
+        self.select_state = False
-        self._go_back()
-
-    def _get_selection_state_str(self) -> str:
-        return (
-            "Select everything" if not self.selection_state else "Deselect everything"
-        )
-
-    def _go_back(self, **kwargs) -> None:
-        if self.previous_menu is not None:
-            self.previous_menu().run()

kiauh/core/backup_manager/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/core/backup_manager/backup_manager.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -44,12 +44,14 @@ class BackupManager:
     def ignore_folders(self, value: List[str]):
         self._ignore_folders = value
 
-    def backup_file(self, file: Path, target: Path | None = None, custom_filename=None):
+    def backup_file(
+        self, file: Path, target: Path | None = None, custom_filename=None
+    ) -> bool:
         Logger.print_status(f"Creating backup of {file} ...")
 
         if not file.exists():
             Logger.print_info("File does not exist! Skipping ...")
-            return
+            return False
 
         target = self.backup_root_dir if target is None else target
 
@@ -62,10 +64,13 @@ class BackupManager:
                 Path(target).mkdir(exist_ok=True)
                 shutil.copyfile(file, target.joinpath(filename))
                 Logger.print_ok("Backup successful!")
+                return True
             except OSError as e:
                 Logger.print_error(f"Unable to backup '{file}':\n{e}")
+                return False
         else:
             Logger.print_info(f"File '{file}' not found ...")
+            return False
 
     def backup_directory(
         self, name: str, source: Path, target: Path | None = None
@@ -74,14 +79,14 @@ class BackupManager:
 
         if source is None or not Path(source).exists():
             Logger.print_info("Source directory does not exist! Skipping ...")
-            return
+            return None
 
         target = self.backup_root_dir if target is None else target
         try:
             date = get_current_date().get("date")
             time = get_current_date().get("time")
             backup_target = target.joinpath(f"{name.lower()}-{date}-{time}")
-            shutil.copytree(source, backup_target, ignore=self.ignore_folders_func)
+            shutil.copytree(source, backup_target, ignore=self.ignore_folders_func, ignore_dangling_symlinks=True)
             Logger.print_ok("Backup successful!")
 
             return backup_target

kiauh/core/constants.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -13,15 +13,6 @@ from pathlib import Path
 
 from core.backup_manager import BACKUP_ROOT_DIR
 
-# text colors and formats
-COLOR_WHITE = "\033[37m"  # white
-COLOR_MAGENTA = "\033[35m"  # magenta
-COLOR_GREEN = "\033[92m"  # bright green
-COLOR_YELLOW = "\033[93m"  # bright yellow
-COLOR_RED = "\033[91m"  # bright red
-COLOR_CYAN = "\033[96m"  # bright cyan
-RESET_FORMAT = "\033[0m"  # reset format
-
 # global dependencies
 GLOBAL_DEPS = ["git", "wget", "curl", "unzip", "dfu-util", "python3-virtualenv"]
 
@@ -33,7 +24,7 @@ CURRENT_USER = pwd.getpwuid(os.getuid())[0]
 
 # dirs
 SYSTEMD = Path("/etc/systemd/system")
-PRINTER_CFG_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("printer-cfg-backups")
+PRINTER_DATA_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("printer-data-backups")
 NGINX_SITES_AVAILABLE = Path("/etc/nginx/sites-available")
 NGINX_SITES_ENABLED = Path("/etc/nginx/sites-enabled")
 NGINX_CONFD = Path("/etc/nginx/conf.d")

kiauh/core/decorators.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/core/instance_manager/base_instance.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/core/instance_manager/instance_manager.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/core/logger.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -12,78 +12,50 @@ import textwrap
 from enum import Enum
 from typing import List
 
-from core.constants import (
+from core.types.color import Color
-    COLOR_CYAN,
-    COLOR_GREEN,
-    COLOR_MAGENTA,
-    COLOR_RED,
-    COLOR_WHITE,
-    COLOR_YELLOW,
-    RESET_FORMAT,
-)
 
 
 class DialogType(Enum):
-    INFO = ("INFO", COLOR_WHITE)
+    INFO = ("INFO", Color.WHITE)
-    SUCCESS = ("SUCCESS", COLOR_GREEN)
+    SUCCESS = ("SUCCESS", Color.GREEN)
-    ATTENTION = ("ATTENTION", COLOR_YELLOW)
+    ATTENTION = ("ATTENTION", Color.YELLOW)
-    WARNING = ("WARNING", COLOR_YELLOW)
+    WARNING = ("WARNING", Color.YELLOW)
-    ERROR = ("ERROR", COLOR_RED)
+    ERROR = ("ERROR", Color.RED)
     CUSTOM = (None, None)
 
 
-class DialogCustomColor(Enum):
-    WHITE = COLOR_WHITE
-    GREEN = COLOR_GREEN
-    YELLOW = COLOR_YELLOW
-    RED = COLOR_RED
-    CYAN = COLOR_CYAN
-    MAGENTA = COLOR_MAGENTA
-
-
 LINE_WIDTH = 53
 
 
 class Logger:
-    @staticmethod
-    def info(msg) -> None:
-        # log to kiauh.log
-        pass
-
-    @staticmethod
-    def warn(msg) -> None:
-        # log to kiauh.log
-        pass
-
-    @staticmethod
-    def error(msg) -> None:
-        # log to kiauh.log
-        pass
-
     @staticmethod
     def print_info(msg, prefix=True, start="", end="\n") -> None:
         message = f"[INFO] {msg}" if prefix else msg
-        print(f"{COLOR_WHITE}{start}{message}{RESET_FORMAT}", end=end)
+        Logger.__print(Color.WHITE, start, message, end)
 
     @staticmethod
     def print_ok(msg: str = "Success!", prefix=True, start="", end="\n") -> None:
         message = f"[OK] {msg}" if prefix else msg
-        print(f"{COLOR_GREEN}{start}{message}{RESET_FORMAT}", end=end)
+        Logger.__print(Color.GREEN, start, message, end)
 
     @staticmethod
     def print_warn(msg, prefix=True, start="", end="\n") -> None:
         message = f"[WARN] {msg}" if prefix else msg
-        print(f"{COLOR_YELLOW}{start}{message}{RESET_FORMAT}", end=end)
+        Logger.__print(Color.YELLOW, start, message, end)
 
     @staticmethod
     def print_error(msg, prefix=True, start="", end="\n") -> None:
         message = f"[ERROR] {msg}" if prefix else msg
-        print(f"{COLOR_RED}{start}{message}{RESET_FORMAT}", end=end)
+        Logger.__print(Color.RED, start, message, end)
 
     @staticmethod
     def print_status(msg, prefix=True, start="", end="\n") -> None:
         message = f"\n###### {msg}" if prefix else msg
-        print(f"{COLOR_MAGENTA}{start}{message}{RESET_FORMAT}", end=end)
+        Logger.__print(Color.MAGENTA, start, message, end)
+
+    @staticmethod
+    def __print(color: Color, start: str, message: str, end: str) -> None:
+        print(Color.apply(f"{start}{message}", color), end=end)
 
     @staticmethod
     def print_dialog(
@@ -91,7 +63,7 @@ class Logger:
         content: List[str],
         center_content: bool = False,
         custom_title: str | None = None,
-        custom_color: DialogCustomColor | None = None,
+        custom_color: Color | None = None,
         margin_top: int = 0,
         margin_bottom: int = 0,
     ) -> None:
@@ -111,10 +83,15 @@ class Logger:
         """
         dialog_color = Logger._get_dialog_color(title, custom_color)
         dialog_title = Logger._get_dialog_title(title, custom_title)
-        dialog_title_formatted = Logger._format_dialog_title(dialog_title)
+        dialog_title_formatted = Logger._format_dialog_title(dialog_title, dialog_color)
-        dialog_content = Logger.format_content(content, LINE_WIDTH, center_content)
+        dialog_content = Logger.format_content(
+            content,
+            LINE_WIDTH,
+            dialog_color,
+            center_content,
+        )
         top = Logger._format_top_border(dialog_color)
-        bottom = Logger._format_bottom_border()
+        bottom = Logger._format_bottom_border(dialog_color)
 
         print("\n" * margin_top)
         print(
@@ -133,39 +110,45 @@ class Logger:
 
     @staticmethod
     def _get_dialog_color(
-        title: DialogType, custom_color: DialogCustomColor | None = None
+        title: DialogType, custom_color: Color | None = None
-    ) -> str:
+    ) -> Color:
         if title == DialogType.CUSTOM and custom_color:
-            return str(custom_color.value)
+            return custom_color
 
-        color: str = title.value[1] if title.value[1] else DialogCustomColor.WHITE.value
+        color: Color = title.value[1] if title.value[1] else Color.WHITE
 
         return color
 
     @staticmethod
-    def _format_top_border(color: str) -> str:
+    def _format_top_border(color: Color) -> str:
-        return f"{color}┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓"
+        _border = Color.apply(
-
+            "┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓\n", color
-    @staticmethod
-    def _format_bottom_border() -> str:
-        return (
-            f"\n┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛{RESET_FORMAT}"
         )
+        return _border
 
     @staticmethod
-    def _format_dialog_title(title: str | None) -> str:
+    def _format_bottom_border(color: Color) -> str:
-        if title is not None:
+        _border = Color.apply(
-            return textwrap.dedent(f"""
+            "\n┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛", color
-                ┃ {title:^{LINE_WIDTH}} ┃
+        )
-                ┠───────────────────────────────────────────────────────┨
+        return _border
-                """)
+
-        else:
+    @staticmethod
-            return "\n"
+    def _format_dialog_title(title: str | None, color: Color) -> str:
+        if title is None:
+            return ""
+
+        _title = Color.apply(f"┃ {title:^{LINE_WIDTH}} ┃\n", color)
+        _title += Color.apply(
+            "┠───────────────────────────────────────────────────────┨\n", color
+        )
+        return _title
 
     @staticmethod
     def format_content(
         content: List[str],
         line_width: int,
+        color: Color = Color.WHITE,
         center_content: bool = False,
         border_left: str = "┃",
         border_right: str = "┃",
@@ -184,11 +167,13 @@ class Logger:
 
         if not center_content:
             formatted_lines = [
-                f"{border_left} {line:<{line_width}} {border_right}" for line in lines
+                Color.apply(f"{border_left} {line:<{line_width}} {border_right}", color)
+                for line in lines
             ]
         else:
             formatted_lines = [
-                f"{border_left} {line:^{line_width}} {border_right}" for line in lines
+                Color.apply(f"{border_left} {line:^{line_width}} {border_right}", color)
+                for line in lines
             ]
 
         return "\n".join(formatted_lines)

kiauh/core/menus/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/core/menus/advanced_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -15,6 +15,7 @@ from components.klipper import KLIPPER_DIR
 from components.klipper.klipper import Klipper
 from components.klipper_firmware.menus.klipper_build_menu import (
     KlipperBuildFirmwareMenu,
+    KlipperKConfigMenu,
 )
 from components.klipper_firmware.menus.klipper_flash_menu import (
     KlipperFlashMethodMenu,
@@ -22,9 +23,9 @@ from components.klipper_firmware.menus.klipper_flash_menu import (
 )
 from components.moonraker import MOONRAKER_DIR
 from components.moonraker.moonraker import Moonraker
-from core.constants import COLOR_YELLOW, RESET_FORMAT
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
+from core.types.color import Color
 from procedures.system import change_system_hostname
 from utils.git_utils import rollback_repository
 
@@ -34,6 +35,8 @@ from utils.git_utils import rollback_repository
 class AdvancedMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None) -> None:
         super().__init__()
+        self.title = "Advanced Menu"
+        self.title_color = Color.YELLOW
         self.previous_menu: Type[BaseMenu] | None = previous_menu
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
@@ -53,13 +56,8 @@ class AdvancedMenu(BaseMenu):
         }
 
     def print_menu(self) -> None:
-        header = " [ Advanced Menu ] "
-        color = COLOR_YELLOW
-        count = 62 - len(color) - len(RESET_FORMAT)
         menu = textwrap.dedent(
-            f"""
+            """
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────┬───────────────────────────╢
             ║ Klipper Firmware:         │ Repository Rollback:      ║
             ║  1) [Build]               │  5) [Klipper]             ║
@@ -79,12 +77,15 @@ class AdvancedMenu(BaseMenu):
         rollback_repository(MOONRAKER_DIR, Moonraker)
 
     def build(self, **kwargs) -> None:
+        KlipperKConfigMenu().run()
         KlipperBuildFirmwareMenu(previous_menu=self.__class__).run()
 
     def flash(self, **kwargs) -> None:
+        KlipperKConfigMenu().run()
         KlipperFlashMethodMenu(previous_menu=self.__class__).run()
 
     def build_flash(self, **kwargs) -> None:
+        KlipperKConfigMenu().run()
         KlipperBuildFirmwareMenu(previous_menu=KlipperFlashMethodMenu).run()
         KlipperFlashMethodMenu(previous_menu=self.__class__).run()
 

kiauh/core/menus/backup_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -13,7 +13,7 @@ from typing import Type
 
 from components.klipper.klipper_utils import backup_klipper_dir
 from components.klipperscreen.klipperscreen import backup_klipperscreen_dir
-from components.moonraker.moonraker_utils import (
+from components.moonraker.utils.utils import (
     backup_moonraker_db_dir,
     backup_moonraker_dir,
 )
@@ -23,9 +23,9 @@ from components.webui_client.client_utils import (
 )
 from components.webui_client.fluidd_data import FluiddData
 from components.webui_client.mainsail_data import MainsailData
-from core.constants import COLOR_CYAN, COLOR_YELLOW, RESET_FORMAT
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
+from core.types.color import Color
 from utils.common import backup_printer_config_dir
 
 
@@ -34,6 +34,8 @@ from utils.common import backup_printer_config_dir
 class BackupMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None) -> None:
         super().__init__()
+        self.title = "Backup Menu"
+        self.title_color = Color.GREEN
         self.previous_menu: Type[BaseMenu] | None = previous_menu
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
@@ -55,14 +57,11 @@ class BackupMenu(BaseMenu):
         }
 
     def print_menu(self) -> None:
-        header = " [ Backup Menu ] "
+        line1 = Color.apply(
-        line1 = f"{COLOR_YELLOW}INFO: Backups are located in '~/kiauh-backups'{RESET_FORMAT}"
+            "INFO: Backups are located in '~/kiauh-backups'", Color.YELLOW
-        color = COLOR_CYAN
+        )
-        count = 62 - len(color) - len(RESET_FORMAT)
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ {line1:^62} ║
             ╟───────────────────────────┬───────────────────────────╢

kiauh/core/menus/base_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -14,36 +14,33 @@ import sys
 import textwrap
 import traceback
 from abc import abstractmethod
+from enum import Enum
 from typing import Dict, Type
 
-from core.constants import (
-    COLOR_CYAN,
-    COLOR_GREEN,
-    COLOR_RED,
-    COLOR_YELLOW,
-    RESET_FORMAT,
-)
 from core.logger import Logger
 from core.menus import FooterType, Option
+from core.services.message_service import MessageService
+from core.spinner import Spinner
+from core.types.color import Color
 from utils.input_utils import get_selection_input
 
 
 def clear() -> None:
-    subprocess.call("clear", shell=True)
+    subprocess.call("clear -x", shell=True)
 
 
 def print_header() -> None:
     line1 = " [ KIAUH ] "
     line2 = "Klipper Installation And Update Helper"
     line3 = ""
-    color = COLOR_CYAN
+    color = Color.CYAN
-    count = 62 - len(color) - len(RESET_FORMAT)
+    count = 62 - len(str(color)) - len(str(Color.RST))
     header = textwrap.dedent(
         f"""
         ╔═══════════════════════════════════════════════════════╗
-        ║ {color}{line1:~^{count}}{RESET_FORMAT} ║
+        ║ {Color.apply(f"{line1:~^{count}}", color)} ║
-        ║ {color}{line2:^{count}}{RESET_FORMAT} ║
+        ║ {Color.apply(f"{line2:^{count}}", color)} ║
-        ║ {color}{line3:~^{count}}{RESET_FORMAT} ║
+        ║ {Color.apply(f"{line3:~^{count}}", color)} ║
         ╚═══════════════════════════════════════════════════════╝
         """
     )[1:]
@@ -52,11 +49,11 @@ def print_header() -> None:
 
 def print_quit_footer() -> None:
     text = "Q) Quit"
-    color = COLOR_RED
+    color = Color.RED
-    count = 62 - len(color) - len(RESET_FORMAT)
+    count = 62 - len(str(color)) - len(str(Color.RST))
     footer = textwrap.dedent(
         f"""
-        ║ {color}{text:^{count}}{RESET_FORMAT} ║
+        ║ {color}{text:^{count}}{Color.RST} ║
         ╚═══════════════════════════════════════════════════════╝
         """
     )[1:]
@@ -65,11 +62,11 @@ def print_quit_footer() -> None:
 
 def print_back_footer() -> None:
     text = "B) « Back"
-    color = COLOR_GREEN
+    color = Color.GREEN
-    count = 62 - len(color) - len(RESET_FORMAT)
+    count = 62 - len(str(color)) - len(str(Color.RST))
     footer = textwrap.dedent(
         f"""
-        ║ {color}{text:^{count}}{RESET_FORMAT} ║
+        ║ {color}{text:^{count}}{Color.RST} ║
         ╚═══════════════════════════════════════════════════════╝
         """
     )[1:]
@@ -79,12 +76,12 @@ def print_back_footer() -> None:
 def print_back_help_footer() -> None:
     text1 = "B) « Back"
     text2 = "H) Help [?]"
-    color1 = COLOR_GREEN
+    color1 = Color.GREEN
-    color2 = COLOR_YELLOW
+    color2 = Color.YELLOW
-    count = 34 - len(color1) - len(RESET_FORMAT)
+    count = 34 - len(str(color1)) - len(str(Color.RST))
     footer = textwrap.dedent(
         f"""
-        ║ {color1}{text1:^{count}}{RESET_FORMAT} │ {color2}{text2:^{count}}{RESET_FORMAT} ║
+        ║ {color1}{text1:^{count}}{Color.RST} │ {color2}{text2:^{count}}{Color.RST} ║
         ╚═══════════════════════════╧═══════════════════════════╝
         """
     )[1:]
@@ -95,6 +92,11 @@ def print_blank_footer() -> None:
     print("╚═══════════════════════════════════════════════════════╝")
 
 
+class MenuTitleStyle(Enum):
+    PLAIN = "plain"
+    STYLED = "styled"
+
+
 class PostInitCaller(type):
     def __call__(cls, *args, **kwargs):
         obj = type.__call__(cls, *args, **kwargs)
@@ -110,10 +112,20 @@ class BaseMenu(metaclass=PostInitCaller):
     default_option: Option = None
     input_label_txt: str = "Perform action"
     header: bool = False
+
+    loading_msg: str = ""
+    spinner: Spinner | None = None
+
+    title: str = ""
+    title_style: MenuTitleStyle = MenuTitleStyle.STYLED
+    title_color: Color = Color.WHITE
+
     previous_menu: Type[BaseMenu] | None = None
     help_menu: Type[BaseMenu] | None = None
     footer_type: FooterType = FooterType.BACK
 
+    message_service = MessageService()
+
     def __init__(self, **kwargs) -> None:
         if type(self) is BaseMenu:
             raise NotImplementedError("BaseMenu cannot be instantiated directly.")
@@ -160,7 +172,32 @@ class BaseMenu(metaclass=PostInitCaller):
     def print_menu(self) -> None:
         raise NotImplementedError
 
-    def print_footer(self) -> None:
+    def is_loading(self, state: bool) -> None:
+        if not self.spinner and state:
+            self.spinner = Spinner(self.loading_msg)
+            self.spinner.start()
+        else:
+            self.spinner.stop()
+            self.spinner = None
+
+    def __print_menu_title(self) -> None:
+        count = 62 - len(str(self.title_color)) - len(str(Color.RST))
+        menu_title = "╔═══════════════════════════════════════════════════════╗\n"
+        if self.title:
+            title = (
+                f" [ {self.title} ] "
+                if self.title_style == MenuTitleStyle.STYLED
+                else self.title
+            )
+            line = (
+                f"{title:~^{count}}"
+                if self.title_style == MenuTitleStyle.STYLED
+                else f"{title:^{count}}"
+            )
+            menu_title += f"║ {Color.apply(line, self.title_color)} ║\n"
+        print(menu_title, end="")
+
+    def __print_footer(self) -> None:
         if self.footer_type is FooterType.QUIT:
             print_quit_footer()
         elif self.footer_type is FooterType.BACK:
@@ -172,16 +209,20 @@ class BaseMenu(metaclass=PostInitCaller):
         else:
             raise NotImplementedError("FooterType not correctly implemented!")
 
-    def display_menu(self) -> None:
+    def __display_menu(self) -> None:
+        self.message_service.display_message()
+
         if self.header:
             print_header()
+
+        self.__print_menu_title()
         self.print_menu()
-        self.print_footer()
+        self.__print_footer()
 
     def run(self) -> None:
         """Start the menu lifecycle. When this function returns, the lifecycle of the menu ends."""
         try:
-            self.display_menu()
+            self.__display_menu()
             option = get_selection_input(self.input_label_txt, self.options)
             selected_option: Option = self.options.get(option)
 

kiauh/core/menus/install_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -15,13 +15,17 @@ from components.crowsnest.crowsnest import install_crowsnest
 from components.klipper import klipper_setup
 from components.klipperscreen.klipperscreen import install_klipperscreen
 from components.moonraker import moonraker_setup
-from components.webui_client import client_setup
+from components.webui_client.client_config.client_config_setup import (
-from components.webui_client.client_config import client_config_setup
+    install_client_config,
+)
+from components.webui_client.client_setup import install_client
 from components.webui_client.fluidd_data import FluiddData
 from components.webui_client.mainsail_data import MainsailData
-from core.constants import COLOR_GREEN, RESET_FORMAT
+from components.webui_client.menus.client_install_menu import ClientInstallMenu
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
+from core.settings.kiauh_settings import KiauhSettings
+from core.types.color import Color
 
 
 # noinspection PyUnusedLocal
@@ -29,6 +33,8 @@ from core.menus.base_menu import BaseMenu
 class InstallMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None) -> None:
         super().__init__()
+        self.title = "Installation Menu"
+        self.title_color = Color.GREEN
         self.previous_menu: Type[BaseMenu] | None = previous_menu
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
@@ -49,13 +55,8 @@ class InstallMenu(BaseMenu):
         }
 
     def print_menu(self) -> None:
-        header = " [ Installation Menu ] "
-        color = COLOR_GREEN
-        count = 62 - len(color) - len(RESET_FORMAT)
         menu = textwrap.dedent(
-            f"""
+            """
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────┬───────────────────────────╢
             ║ Firmware & API:           │ Touchscreen GUI:          ║
             ║  1) [Klipper]             │  7) [KlipperScreen]       ║
@@ -80,16 +81,24 @@ class InstallMenu(BaseMenu):
         moonraker_setup.install_moonraker()
 
     def install_mainsail(self, **kwargs) -> None:
-        client_setup.install_client(MainsailData())
+        client: MainsailData = MainsailData()
+        if client.client_dir.exists():
+            ClientInstallMenu(client, self.__class__).run()
+        else:
+            install_client(client, settings=KiauhSettings())
 
     def install_mainsail_config(self, **kwargs) -> None:
-        client_config_setup.install_client_config(MainsailData())
+        install_client_config(MainsailData())
 
     def install_fluidd(self, **kwargs) -> None:
-        client_setup.install_client(FluiddData())
+        client: FluiddData = FluiddData()
+        if client.client_dir.exists():
+            ClientInstallMenu(client, self.__class__).run()
+        else:
+            install_client(client, settings=KiauhSettings())
 
     def install_fluidd_config(self, **kwargs) -> None:
-        client_config_setup.install_client_config(FluiddData())
+        install_client_config(FluiddData())
 
     def install_klipperscreen(self, **kwargs) -> None:
         install_klipperscreen()

kiauh/core/menus/main_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -16,21 +16,13 @@ from components.crowsnest.crowsnest import get_crowsnest_status
 from components.klipper.klipper_utils import get_klipper_status
 from components.klipperscreen.klipperscreen import get_klipperscreen_status
 from components.log_uploads.menus.log_upload_menu import LogUploadMenu
-from components.moonraker.moonraker_utils import get_moonraker_status
+from components.moonraker.utils.utils import get_moonraker_status
 from components.webui_client.client_utils import (
     get_client_status,
     get_current_client_config,
 )
 from components.webui_client.fluidd_data import FluiddData
 from components.webui_client.mainsail_data import MainsailData
-from core.constants import (
-    COLOR_CYAN,
-    COLOR_GREEN,
-    COLOR_MAGENTA,
-    COLOR_RED,
-    COLOR_YELLOW,
-    RESET_FORMAT,
-)
 from core.logger import Logger
 from core.menus import FooterType
 from core.menus.advanced_menu import AdvancedMenu
@@ -40,7 +32,8 @@ from core.menus.install_menu import InstallMenu
 from core.menus.remove_menu import RemoveMenu
 from core.menus.settings_menu import SettingsMenu
 from core.menus.update_menu import UpdateMenu
-from core.types import ComponentStatus, StatusMap, StatusText
+from core.types.color import Color
+from core.types.component_status import ComponentStatus, StatusMap, StatusText
 from extensions.extensions_menu import ExtensionsMenu
 from utils.common import get_kiauh_version, trunc_string
 
@@ -52,6 +45,8 @@ class MainMenu(BaseMenu):
         super().__init__()
 
         self.header: bool = True
+        self.title = "Main Menu"
+        self.title_color = Color.CYAN
         self.footer_type: FooterType = FooterType.QUIT
 
         self.version = ""
@@ -83,7 +78,7 @@ class MainMenu(BaseMenu):
             setattr(
                 self,
                 f"{var}_status",
-                f"{COLOR_RED}Not installed{RESET_FORMAT}",
+                Color.apply("Not installed", Color.RED),
             )
 
     def _fetch_status(self) -> None:
@@ -109,34 +104,30 @@ class MainMenu(BaseMenu):
             count_txt = f": {instance_count}"
 
         setattr(self, f"{name}_status", self._format_by_code(code, status, count_txt))
-        setattr(self, f"{name}_owner", f"{COLOR_CYAN}{owner}{RESET_FORMAT}")
+        setattr(self, f"{name}_owner", Color.apply(owner, Color.CYAN))
-        setattr(self, f"{name}_repo", f"{COLOR_CYAN}{repo}{RESET_FORMAT}")
+        setattr(self, f"{name}_repo", Color.apply(repo, Color.CYAN))
 
     def _format_by_code(self, code: int, status: str, count: str) -> str:
-        color = COLOR_RED
+        color = Color.RED
         if code == 0:
-            color = COLOR_RED
+            color = Color.RED
         elif code == 1:
-            color = COLOR_YELLOW
+            color = Color.YELLOW
         elif code == 2:
-            color = COLOR_GREEN
+            color = Color.GREEN
 
-        return f"{color}{status}{count}{RESET_FORMAT}"
+        return Color.apply(f"{status}{count}", color)
 
     def print_menu(self) -> None:
         self._fetch_status()
 
-        header = " [ Main Menu ] "
+        footer1 = Color.apply(self.version, Color.CYAN)
-        footer1 = f"{COLOR_CYAN}{self.version}{RESET_FORMAT}"
+        link = Color.apply("https://git.io/JnmlX", Color.MAGENTA)
-        footer2 = f"Changelog: {COLOR_MAGENTA}https://git.io/JnmlX{RESET_FORMAT}"
+        footer2 = f"Changelog: {link}"
-        color = COLOR_CYAN
-        count = 62 - len(color) - len(RESET_FORMAT)
         pad1 = 32
         pad2 = 26
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟──────────────────┬────────────────────────────────────╢
             ║  0) [Log-Upload] │   Klipper: {self.kl_status:<{pad1}} ║
             ║                  │     Owner: {self.kl_owner:<{pad1}} ║

kiauh/core/menus/remove_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -20,9 +20,9 @@ from components.moonraker.menus.moonraker_remove_menu import (
 from components.webui_client.fluidd_data import FluiddData
 from components.webui_client.mainsail_data import MainsailData
 from components.webui_client.menus.client_remove_menu import ClientRemoveMenu
-from core.constants import COLOR_RED, RESET_FORMAT
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
+from core.types.color import Color
 
 
 # noinspection PyUnusedLocal
@@ -30,6 +30,8 @@ from core.menus.base_menu import BaseMenu
 class RemoveMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None) -> None:
         super().__init__()
+        self.title = "Remove Menu"
+        self.title_color = Color.RED
         self.previous_menu: Type[BaseMenu] | None = previous_menu
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
@@ -48,13 +50,8 @@ class RemoveMenu(BaseMenu):
         }
 
     def print_menu(self) -> None:
-        header = " [ Remove Menu ] "
-        color = COLOR_RED
-        count = 62 - len(color) - len(RESET_FORMAT)
         menu = textwrap.dedent(
-            f"""
+            """
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ INFO: Configurations and/or any backups will be kept! ║
             ╟───────────────────────────┬───────────────────────────╢

kiauh/core/menus/settings_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -9,13 +9,18 @@
 from __future__ import annotations
 
 import textwrap
+from pathlib import Path
 from typing import Literal, Tuple, Type
 
-from core.constants import COLOR_CYAN, COLOR_GREEN, RESET_FORMAT
+from components.klipper import KLIPPER_DIR, KLIPPER_REPO_URL
+from components.klipper.klipper_utils import get_klipper_status
+from components.moonraker import MOONRAKER_DIR, MOONRAKER_REPO_URL
+from components.moonraker.utils.utils import get_moonraker_status
 from core.logger import DialogType, Logger
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
 from core.settings.kiauh_settings import KiauhSettings, RepoSettings
+from core.types.color import Color
 from procedures.switch_repo import run_switch_repo_routine
 from utils.input_utils import get_confirm, get_string_input
 
@@ -25,13 +30,16 @@ from utils.input_utils import get_confirm, get_string_input
 class SettingsMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None) -> None:
         super().__init__()
+        self.title = "Settings Menu"
+        self.title_color = Color.CYAN
         self.previous_menu: Type[BaseMenu] | None = previous_menu
-        self.klipper_repo: str | None = None
+
-        self.moonraker_repo: str | None = None
         self.mainsail_unstable: bool | None = None
         self.fluidd_unstable: bool | None = None
         self.auto_backups_enabled: bool | None = None
         self._load_settings()
+        print(self.klipper_status)
+
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
         from core.menus.main_menu import MainMenu
@@ -48,32 +56,38 @@ class SettingsMenu(BaseMenu):
         }
 
     def print_menu(self) -> None:
-        header = " [ KIAUH Settings ] "
+        color = Color.CYAN
-        color = COLOR_CYAN
+        checked = f"[{Color.apply('x', Color.GREEN)}]"
-        count = 62 - len(color) - len(RESET_FORMAT)
-        checked = f"[{COLOR_GREEN}x{RESET_FORMAT}]"
         unchecked = "[ ]"
+
+        kl_repo: str = Color.apply(self.klipper_status.repo, color)
+        kl_branch: str = Color.apply(self.klipper_status.branch, color)
+        kl_owner: str = Color.apply(self.klipper_status.owner, color)
+        mr_repo: str = Color.apply(self.moonraker_status.repo, color)
+        mr_branch: str = Color.apply(self.moonraker_status.branch, color)
+        mr_owner: str = Color.apply(self.moonraker_status.owner, color)
         o1 = checked if self.mainsail_unstable else unchecked
         o2 = checked if self.fluidd_unstable else unchecked
         o3 = checked if self.auto_backups_enabled else unchecked
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
-            ║ Klipper source repository:                            ║
+            ║ Klipper:                                              ║
-            ║   ● {self.klipper_repo:<67} ║
+            ║  ● Repo:   {kl_repo:51} ║
-            ║                                                       ║
+            ║  ● Owner:  {kl_owner:51} ║
-            ║ Moonraker source repository:                          ║
+            ║  ● Branch: {kl_branch:51} ║
-            ║   ● {self.moonraker_repo:<67} ║
+            ╟───────────────────────────────────────────────────────╢
-            ║                                                       ║
+            ║ Moonraker:                                            ║
-            ║ Install unstable Webinterface releases:               ║
+            ║  ● Repo:   {mr_repo:51} ║
+            ║  ● Owner:  {mr_owner:51} ║
+            ║  ● Branch: {mr_branch:51} ║
+            ╟───────────────────────────────────────────────────────╢
+            ║ Install unstable releases:                            ║
             ║  {o1} Mainsail                                         ║
             ║  {o2} Fluidd                                           ║
-            ║                                                       ║
+            ╟───────────────────────────────────────────────────────╢
             ║ Auto-Backup:                                          ║
             ║  {o3} Automatic backup before update                   ║
-            ║                                                       ║
             ╟───────────────────────────────────────────────────────╢
             ║ 1) Set Klipper source repository                      ║
             ║ 2) Set Moonraker source repository                    ║
@@ -89,51 +103,55 @@ class SettingsMenu(BaseMenu):
 
     def _load_settings(self) -> None:
         self.settings = KiauhSettings()
-
-        self._format_repo_str("klipper")
-        self._format_repo_str("moonraker")
-
         self.auto_backups_enabled = self.settings.kiauh.backup_before_update
         self.mainsail_unstable = self.settings.mainsail.unstable_releases
         self.fluidd_unstable = self.settings.fluidd.unstable_releases
 
-    def _format_repo_str(self, repo_name: Literal["klipper", "moonraker"]) -> None:
+        # by default, we show the status of the installed repositories
-        repo: RepoSettings = self.settings[repo_name]
+        self.klipper_status = get_klipper_status()
-        repo_str = f"{'/'.join(repo.repo_url.rsplit('/', 2)[-2:])}"
+        self.moonraker_status = get_moonraker_status()
-        branch_str = f"({COLOR_CYAN}@ {repo.branch}{RESET_FORMAT})"
+        # if the repository is not installed, we show the status of the settings from the config file
+        if self.klipper_status.repo == "-":
+            url_parts = self.settings.klipper.repo_url.split("/")
+            self.klipper_status.repo = url_parts[-1]
+            self.klipper_status.owner = url_parts[-2]
+            self.klipper_status.branch = self.settings.klipper.branch
+        if self.moonraker_status.repo == "-":
+            url_parts = self.settings.moonraker.repo_url.split("/")
+            self.moonraker_status.repo = url_parts[-1]
+            self.moonraker_status.owner = url_parts[-2]
+            self.moonraker_status.branch = self.settings.moonraker.branch
 
-        setattr(
+    def _gather_input(self, repo_name: Literal["klipper", "moonraker"], repo_dir: Path) -> Tuple[str, str]:
-            self,
+        warn_msg = [
-            f"{repo_name}_repo",
+            "There is only basic input validation in place! "
-            f"{COLOR_CYAN}{repo_str}{RESET_FORMAT} {branch_str}",
+            "Make sure your the input is valid and has no typos or invalid characters!"]
-        )
 
-    def _gather_input(self) -> Tuple[str, str]:
+        if repo_dir.exists():
-        Logger.print_dialog(
+            warn_msg.extend([
-            DialogType.ATTENTION,
+                "For the change to take effect, the new repository will be cloned. "
-            [
+                "A backup of the old repository will be created.",
-                "There is no input validation in place! Make sure your the input is "
-                "valid and has no typos or invalid characters! For the change to take "
-                "effect, the new repository will be cloned. A backup of the old "
-                "repository will be created.",
                 "\n\n",
                 "Make sure you don't have any ongoing prints running, as the services "
-                "will be restarted during this process! You will loose any ongoing print!",
+                "will be restarted during this process! You will loose any ongoing print!"])
-            ],
+
-        )
+        Logger.print_dialog(DialogType.ATTENTION, warn_msg)
+
         repo = get_string_input(
             "Enter new repository URL",
-            allow_special_chars=True,
+            regex=r"^[\w/.:-]+$",
+            default=KLIPPER_REPO_URL if repo_name == "klipper" else MOONRAKER_REPO_URL,
         )
         branch = get_string_input(
             "Enter new branch name",
-            allow_special_chars=True,
+            regex=r"^.+$",
+            default="master"
         )
 
         return repo, branch
 
-    def _set_repo(self, repo_name: Literal["klipper", "moonraker"]) -> None:
+    def _set_repo(self, repo_name: Literal["klipper", "moonraker"], repo_dir: Path) -> None:
-        repo_url, branch = self._gather_input()
+        repo_url, branch = self._gather_input(repo_name, repo_dir)
         display_name = repo_name.capitalize()
         Logger.print_dialog(
             DialogType.CUSTOM,
@@ -156,22 +174,26 @@ class SettingsMenu(BaseMenu):
             Logger.print_ok("Changes saved!")
         else:
             Logger.print_info(
-                f"Skipping change of {display_name} source repository  ..."
+                f"Changing of {display_name} source repository canceled ..."
             )
             return
 
-        Logger.print_status(f"Switching to {display_name}'s new source repository ...")
+        self._switch_repo(repo_name, repo_dir)
-        self._switch_repo(repo_name)
+
+    def _switch_repo(self, name: Literal["klipper", "moonraker"], repo_dir: Path ) -> None:
+        if not repo_dir.exists():
+            return
+
+        Logger.print_status(f"Switching to {name.capitalize()}'s new source repository ...")
 
-    def _switch_repo(self, name: Literal["klipper", "moonraker"]) -> None:
         repo: RepoSettings = self.settings[name]
         run_switch_repo_routine(name, repo)
 
     def set_klipper_repo(self, **kwargs) -> None:
-        self._set_repo("klipper")
+        self._set_repo("klipper", KLIPPER_DIR)
 
     def set_moonraker_repo(self, **kwargs) -> None:
-        self._set_repo("moonraker")
+        self._set_repo("moonraker", MOONRAKER_DIR)
 
     def toggle_mainsail_release(self, **kwargs) -> None:
         self.mainsail_unstable = not self.mainsail_unstable

kiauh/core/menus/update_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -21,7 +21,7 @@ from components.klipperscreen.klipperscreen import (
     update_klipperscreen,
 )
 from components.moonraker.moonraker_setup import update_moonraker
-from components.moonraker.moonraker_utils import get_moonraker_status
+from components.moonraker.utils.utils import get_moonraker_status
 from components.webui_client.client_config.client_config_setup import (
     update_client_config,
 )
@@ -32,17 +32,11 @@ from components.webui_client.client_utils import (
 )
 from components.webui_client.fluidd_data import FluiddData
 from components.webui_client.mainsail_data import MainsailData
-from core.constants import (
-    COLOR_GREEN,
-    COLOR_RED,
-    COLOR_YELLOW,
-    RESET_FORMAT,
-)
 from core.logger import DialogType, Logger
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
-from core.spinner import Spinner
+from core.types.color import Color
-from core.types import ComponentStatus
+from core.types.component_status import ComponentStatus
 from utils.input_utils import get_confirm
 from utils.sys_utils import (
     get_upgradable_packages,
@@ -56,6 +50,11 @@ from utils.sys_utils import (
 class UpdateMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None) -> None:
         super().__init__()
+        self.loading_msg = "Loading update menu, please wait"
+        self.is_loading(True)
+
+        self.title = "Update Menu"
+        self.title_color = Color.GREEN
         self.previous_menu: Type[BaseMenu] | None = previous_menu
 
         self.packages: List[str] = []
@@ -123,6 +122,9 @@ class UpdateMenu(BaseMenu):
             },
         }
 
+        self._fetch_update_status()
+        self.is_loading(False)
+
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
         from core.menus.main_menu import MainMenu
 
@@ -143,29 +145,16 @@ class UpdateMenu(BaseMenu):
         }
 
     def print_menu(self) -> None:
-        spinner = Spinner("Loading update menu, please wait", color="green")
-        spinner.start()
-
-        self._fetch_update_status()
-
-        spinner.stop()
-
-        header = " [ Update Menu ] "
-        color = COLOR_GREEN
-        count = 62 - len(color) - len(RESET_FORMAT)
-
         sysupgrades: str = "No upgrades available."
         padding = 29
         if self.package_count > 0:
-            sysupgrades = (
+            sysupgrades = Color.apply(
-                f"{COLOR_GREEN}{self.package_count} upgrades available!{RESET_FORMAT}"
+                f"{self.package_count} upgrades available!", Color.GREEN
             )
             padding = 38
 
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────┬───────────────┬───────────────╢
             ║  a) Update all        │               │               ║
             ║                       │ Current:      │ Latest:       ║
@@ -265,15 +254,15 @@ class UpdateMenu(BaseMenu):
         self.package_count = len(self.packages)
 
     def _format_local_status(self, local_version, remote_version) -> str:
-        color = COLOR_RED
+        color = Color.RED
         if not local_version:
-            color = COLOR_RED
+            color = Color.RED
         elif local_version == remote_version:
-            color = COLOR_GREEN
+            color = Color.GREEN
         elif local_version != remote_version:
-            color = COLOR_YELLOW
+            color = Color.YELLOW
 
-        return f"{color}{local_version or '-'}{RESET_FORMAT}"
+        return Color.apply(local_version or "-", color)
 
     def _set_status_data(self, name: str, status_fn: Callable, *args) -> None:
         comp_status: ComponentStatus = status_fn(*args)
@@ -288,9 +277,9 @@ class UpdateMenu(BaseMenu):
         local_status = self.status_data[name].get("local", None)
         remote_status = self.status_data[name].get("remote", None)
 
-        color = COLOR_GREEN if remote_status else COLOR_RED
+        color = Color.GREEN if remote_status else Color.RED
         local_txt = self._format_local_status(local_status, remote_status)
-        remote_txt = f"{color}{remote_status or '-'}{RESET_FORMAT}"
+        remote_txt = Color.apply(remote_status or "-", color)
 
         setattr(self, f"{name}_local", local_txt)
         setattr(self, f"{name}_remote", remote_txt)

kiauh/core/services/message_service.py

@@ -0,0 +1,59 @@
+# ======================================================================= #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from dataclasses import dataclass, field
+from typing import List
+
+from core.logger import DialogType, Logger
+from core.types.color import Color
+
+
+@dataclass()
+class Message:
+    title: str = field(default="")
+    text: List[str] = field(default_factory=list)
+    color: Color = field(default=Color.WHITE)
+    centered: bool = field(default=False)
+
+
+class MessageService:
+    _instance = None
+
+    def __new__(cls) -> "MessageService":
+        if cls._instance is None:
+            cls._instance = super(MessageService, cls).__new__(cls)
+        return cls._instance
+
+    def __init__(self) -> None:
+        if not hasattr(self, "__initialized"):
+            self.__initialized = False
+        if self.__initialized:
+            return
+        self.__initialized = True
+        self.message = None
+
+    def set_message(self, message: Message) -> None:
+        self.message = message
+
+    def display_message(self) -> None:
+        if self.message is None:
+            return
+
+        Logger.print_dialog(
+            title=DialogType.CUSTOM,
+            content=self.message.text,
+            custom_title=self.message.title,
+            custom_color=self.message.color,
+            center_content=self.message.centered,
+        )
+
+        self.__clear_message()
+
+    def __clear_message(self) -> None:
+        self.message = None

kiauh/core/settings/kiauh_settings.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -145,7 +145,8 @@ class KiauhSettings:
     def _validate_str(self, section: str, option: str) -> None:
         self._v_section, self._v_option = (section, option)
         v = self.config.getval(section, option)
-        if v.isdigit() or v.lower() == "true" or v.lower() == "false":
+
+        if not v:
             raise ValueError
 
     def _apply_settings_from_file(self) -> None:

kiauh/core/spinner.py

@@ -3,13 +3,7 @@ import threading
 import time
 from typing import List, Literal
 
-from core.constants import (
+from core.types.color import Color
-    COLOR_GREEN,
-    COLOR_RED,
-    COLOR_WHITE,
-    COLOR_YELLOW,
-    RESET_FORMAT,
-)
 
 SpinnerColor = Literal["white", "red", "green", "yellow"]
 
@@ -18,21 +12,18 @@ class Spinner:
     def __init__(
         self,
         message: str = "Loading",
-        color: SpinnerColor = "white",
         interval: float = 0.2,
     ) -> None:
         self.message = f"{message} ..."
         self.interval = interval
         self._stop_event = threading.Event()
         self._thread = threading.Thread(target=self._animate)
-        self._color = ""
-        self._set_color(color)
 
     def _animate(self) -> None:
         animation: List[str] = ["⠋", "⠙", "⠹", "⠸", "⠼", "⠴", "⠦", "⠧", "⠇", "⠏"]
         while not self._stop_event.is_set():
             for char in animation:
-                sys.stdout.write(f"\r{self._color}{char}{RESET_FORMAT} {self.message}")
+                sys.stdout.write(f"\r{Color.GREEN}{char}{Color.RST} {self.message}")
                 sys.stdout.flush()
                 time.sleep(self.interval)
                 if self._stop_event.is_set():
@@ -40,16 +31,6 @@ class Spinner:
         sys.stdout.write("\r" + " " * (len(self.message) + 1) + "\r")
         sys.stdout.flush()
 
-    def _set_color(self, color: SpinnerColor) -> None:
-        if color == "white":
-            self._color = COLOR_WHITE
-        elif color == "red":
-            self._color = COLOR_RED
-        elif color == "green":
-            self._color = COLOR_GREEN
-        elif color == "yellow":
-            self._color = COLOR_YELLOW
-
     def start(self) -> None:
         self._stop_event.clear()
         if not self._thread.is_alive():

kiauh/core/types/color.py

@@ -0,0 +1,29 @@
+# ======================================================================= #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from __future__ import annotations
+
+from enum import Enum
+
+
+class Color(Enum):
+    WHITE = "\033[37m"  # white
+    MAGENTA = "\033[35m"  # magenta
+    GREEN = "\033[92m"  # bright green
+    YELLOW = "\033[93m"  # bright yellow
+    RED = "\033[91m"  # bright red
+    CYAN = "\033[96m"  # bright cyan
+    RST = "\033[0m"  # reset format
+
+    def __str__(self):
+        return self.value
+
+    @staticmethod
+    def apply(text: str | int, color: "Color") -> str:
+        """Apply a given color to a given text string."""
+        return f"{color}{text}{Color.RST}"

kiauh/core/types/component_status.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -25,6 +25,7 @@ class ComponentStatus:
     status: StatusCode
     owner: str | None = None
     repo: str | None = None
+    branch: str = ""
     local: str | None = None
     remote: str | None = None
     instances: int | None = None

kiauh/extensions/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/base_extension.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/extensions_menu.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -15,10 +15,10 @@ import textwrap
 from pathlib import Path
 from typing import Dict, List, Type
 
-from core.constants import COLOR_CYAN, COLOR_YELLOW, RESET_FORMAT
 from core.logger import Logger
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
+from core.types.color import Color
 from extensions import EXTENSION_ROOT
 from extensions.base_extension import BaseExtension
 
@@ -28,6 +28,8 @@ from extensions.base_extension import BaseExtension
 class ExtensionsMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
+        self.title = "Extensions Menu"
+        self.title_color = Color.CYAN
         self.previous_menu: Type[BaseMenu] | None = previous_menu
         self.extensions: Dict[str, BaseExtension] = self.discover_extensions()
 
@@ -58,12 +60,16 @@ class ExtensionsMenu(BaseMenu):
                     module_path = f"kiauh.extensions.{ext.name}.{module_name}"
 
                     # get the class name of the extension
-                    ext_class: Type[BaseExtension] = inspect.getmembers(
+                    module = importlib.import_module(module_path)
-                        importlib.import_module(module_path),
+
-                        predicate=lambda o: inspect.isclass(o)
+                    def predicate(o):
-                        and issubclass(o, BaseExtension)
+                        return (
-                        and o != BaseExtension,
+                            inspect.isclass(o)
-                    )[0][1]
+                            and issubclass(o, BaseExtension)
+                            and o != BaseExtension
+                        )
+
+                    ext_class: type = inspect.getmembers(module, predicate)[0][1]
 
                     # instantiate the extension with its metadata and add to dict
                     ext_instance: BaseExtension = ext_class(metadata)
@@ -72,20 +78,15 @@ class ExtensionsMenu(BaseMenu):
             except (IOError, json.JSONDecodeError, ImportError) as e:
                 print(f"Failed loading extension {ext}: {e}")
 
-        return dict(sorted(ext_dict.items()))
+        return dict(sorted(ext_dict.items(), key=lambda x: int(x[0])))
 
     def extension_submenu(self, **kwargs):
         ExtensionSubmenu(kwargs.get("opt_data"), self.__class__).run()
 
     def print_menu(self) -> None:
-        header = " [ Extensions Menu ] "
+        line1 = Color.apply("Available Extensions:", Color.YELLOW)
-        color = COLOR_CYAN
-        line1 = f"{COLOR_YELLOW}Available Extensions:{RESET_FORMAT}"
-        count = 62 - len(color) - len(RESET_FORMAT)
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ {line1:<62} ║
             ║                                                       ║
@@ -108,6 +109,8 @@ class ExtensionSubmenu(BaseMenu):
         self, extension: BaseExtension, previous_menu: Type[BaseMenu] | None = None
     ):
         super().__init__()
+        self.title = extension.metadata.get("display_name")
+        self.title_color = Color.YELLOW
         self.extension = extension
         self.previous_menu: Type[BaseMenu] | None = previous_menu
 
@@ -125,9 +128,6 @@ class ExtensionSubmenu(BaseMenu):
             self.options["2"] = Option(self.extension.remove_extension)
 
     def print_menu(self) -> None:
-        header = f" [ {self.extension.metadata.get('display_name')} ] "
-        color = COLOR_YELLOW
-        count = 62 - len(color) - len(RESET_FORMAT)
         line_width = 53
         description: List[str] = self.extension.metadata.get("description", [])
         description_text = Logger.format_content(
@@ -138,9 +138,7 @@ class ExtensionSubmenu(BaseMenu):
         )
 
         menu = textwrap.dedent(
-            f"""
+            """
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             """
         )[1:]

kiauh/extensions/gcode_shell_cmd/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/gcode_shell_cmd/gcode_shell_cmd_extension.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/mainsail_theme_installer/mainsail_theme_installer_extension.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -20,10 +20,10 @@ from components.klipper.klipper_dialogs import (
     DisplayType,
     print_instance_overview,
 )
-from core.constants import COLOR_CYAN, COLOR_YELLOW, RESET_FORMAT
 from core.logger import Logger
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
+from core.types.color import Color
 from extensions.base_extension import BaseExtension
 from utils.git_utils import git_clone_wrapper
 from utils.input_utils import get_selection_input
@@ -80,6 +80,8 @@ class MainsailThemeInstallMenu(BaseMenu):
 
     def __init__(self, instances: List[Klipper]):
         super().__init__()
+        self.title = "Mainsail Theme Installer"
+        self.title_color = Color.YELLOW
         self.themes: List[ThemeData] = self.load_themes()
         self.instances = instances
 
@@ -97,14 +99,11 @@ class MainsailThemeInstallMenu(BaseMenu):
         }
 
     def print_menu(self) -> None:
-        header = " [ Mainsail Theme Installer ] "
+        line1 = Color.apply(
-        color = COLOR_YELLOW
+            "A preview of each Mainsail theme can be found here:", Color.YELLOW
-        line1 = f"{COLOR_CYAN}A preview of each Mainsail theme can be found here:{RESET_FORMAT}"
+        )
-        count = 62 - len(color) - len(RESET_FORMAT)
         menu = textwrap.dedent(
             f"""
-            ╔═══════════════════════════════════════════════════════╗
-            ║ {color}{header:~^{count}}{RESET_FORMAT} ║
             ╟───────────────────────────────────────────────────────╢
             ║ {line1:<62} ║
             ║ https://docs.mainsail.xyz/theming/themes              ║

kiauh/extensions/mobileraker/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/mobileraker/mobileraker_extension.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/obico/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/obico/moonraker_obico.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/obico/moonraker_obico_extension.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/octoapp/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -14,7 +14,6 @@ OA_REPO = "https://github.com/crysxd/OctoApp-Plugin.git"
 # directories
 OA_DIR = Path.home().joinpath("octoapp")
 OA_ENV_DIR = Path.home().joinpath("octoapp-env")
-OA_STORE_DIR = OA_DIR.joinpath("octoapp-store")
 
 # files
 OA_REQ_FILE = OA_DIR.joinpath("requirements.txt")

kiauh/extensions/octoapp/octoapp.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/octoapp/octoapp_extension.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -10,6 +10,7 @@ import json
 from typing import List
 
 from components.moonraker.moonraker import Moonraker
+from components.klipper.klipper import Klipper
 from core.instance_manager.instance_manager import InstanceManager
 from core.logger import DialogType, Logger
 from extensions.base_extension import BaseExtension
@@ -131,6 +132,7 @@ class OctoappExtension(BaseExtension):
 
         try:
             self._remove_OA_instances(ob_instances)
+            self._remove_OA_store_dirs()
             self._remove_OA_dir()
             self._remove_OA_env()
             remove_config_section(f"include {OA_SYS_CFG_NAME}", mr_instances)
@@ -181,6 +183,21 @@ class OctoappExtension(BaseExtension):
 
         run_remove_routines(OA_DIR)
 
+
+    def _remove_OA_store_dirs(self) -> None:
+        Logger.print_status("Removing OctoApp for Klipper store directory ...")
+
+        klipper_instances: List[Moonraker] = get_instances(Klipper)
+
+        for instance in klipper_instances:
+            store_dir = instance.data_dir.joinpath("octoapp-store")
+            if not store_dir.exists():
+                Logger.print_info(f"'{store_dir}' does not exist. Skipped ...")
+                return
+
+            run_remove_routines(store_dir)
+
+
     def _remove_OA_env(self) -> None:
         Logger.print_status("Removing OctoApp for Klipper environment ...")
 

kiauh/extensions/octoeverywhere/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/octoeverywhere/octoeverywhere.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/octoeverywhere/octoeverywhere_extension.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/pretty_gcode/pretty_gcode_extension.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/simply_print/metadata.json

@@ -0,0 +1,13 @@
+{
+    "metadata": {
+        "index": 10,
+        "module": "simply_print_extension",
+        "maintained_by": "dw-0",
+        "display_name": "SimplyPrint",
+        "description": [
+            "3D Printer Cloud Management Software.",
+            "\n\n",
+            "3D printing doesn't have to be a complicated, analog, SD card-filled experience; step into the future of modern 3D printing"
+        ]
+    }
+}

kiauh/extensions/simply_print/simply_print_extension.py

@@ -0,0 +1,131 @@
+# ======================================================================= #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from typing import List
+
+from components.moonraker.moonraker import Moonraker
+from core.instance_manager.instance_manager import InstanceManager
+from core.logger import DialogType, Logger
+from core.submodules.simple_config_parser.src.simple_config_parser.simple_config_parser import (
+    SimpleConfigParser,
+)
+from extensions.base_extension import BaseExtension
+from utils.common import backup_printer_config_dir, moonraker_exists
+from utils.input_utils import get_confirm
+
+
+# noinspection PyMethodMayBeStatic
+class SimplyPrintExtension(BaseExtension):
+    def install_extension(self, **kwargs) -> None:
+        Logger.print_status("Installing SimplyPrint ...")
+
+        if not (mr_instances := moonraker_exists("SimplyPrint Installer")):
+            return
+
+        Logger.print_dialog(
+            DialogType.INFO,
+            self._construct_dialog(mr_instances, True),
+        )
+
+        if not get_confirm(
+            "Continue SimplyPrint installation?",
+            default_choice=True,
+            allow_go_back=True,
+        ):
+            Logger.print_info("Exiting SimplyPrint installation ...")
+            return
+
+        try:
+            self._patch_moonraker_confs(mr_instances, True)
+
+        except Exception as e:
+            Logger.print_error(f"Error during SimplyPrint installation:\n{e}")
+
+    def remove_extension(self, **kwargs) -> None:
+        Logger.print_status("Removing SimplyPrint ...")
+
+        if not (mr_instances := moonraker_exists("SimplyPrint Uninstaller")):
+            return
+
+        Logger.print_dialog(
+            DialogType.INFO,
+            self._construct_dialog(mr_instances, False),
+        )
+
+        if not get_confirm(
+            "Do you really want to uninstall SimplyPrint?",
+            default_choice=True,
+            allow_go_back=True,
+        ):
+            Logger.print_info("Exiting SimplyPrint uninstallation ...")
+            return
+
+        try:
+            self._patch_moonraker_confs(mr_instances, False)
+
+        except Exception as e:
+            Logger.print_error(f"Error during SimplyPrint installation:\n{e}")
+
+    def _construct_dialog(
+        self, mr_instances: List[Moonraker], is_install: bool
+    ) -> List[str]:
+        mr_names = [f"● {m.service_file_path.name}" for m in mr_instances]
+        _type = "install" if is_install else "uninstall"
+
+        return [
+            "The following Moonraker instances were found:",
+            *mr_names,
+            "\n\n",
+            f"The setup will {_type} SimplyPrint for all Moonraker instances. "
+            f"After {_type}ation, all Moonraker services will be restarted!",
+        ]
+
+    def _patch_moonraker_confs(
+        self, mr_instances: List[Moonraker], is_install: bool
+    ) -> None:
+        section = "simplyprint"
+        _type, _ft = ("Adding", "to") if is_install else ("Removing", "from")
+
+        patched_files = []
+        for moonraker in mr_instances:
+            Logger.print_status(
+                f"{_type} section 'simplyprint' {_ft} {moonraker.cfg_file} ..."
+            )
+            scp = SimpleConfigParser()
+            scp.read_file(moonraker.cfg_file)
+
+            install_and_has_section = is_install and scp.has_section(section)
+            uninstall_and_has_no_section = not is_install and not scp.has_section(
+                section
+            )
+
+            if install_and_has_section or uninstall_and_has_no_section:
+                status = "already" if is_install else "does not"
+                Logger.print_info(
+                    f"Section 'simplyprint' {status} exists! Skipping ..."
+                )
+                continue
+
+            if is_install and not scp.has_section("simplyprint"):
+                backup_printer_config_dir()
+                scp.add_section(section)
+            elif not is_install and scp.has_section("simplyprint"):
+                backup_printer_config_dir()
+                scp.remove_section(section)
+            scp.write_file(moonraker.cfg_file)
+            patched_files.append(moonraker.cfg_file)
+
+        if patched_files:
+            InstanceManager.restart_all(mr_instances)
+
+        install_state = "successfully" if patched_files else "was already"
+        Logger.print_dialog(
+            DialogType.SUCCESS,
+            [f"SimplyPrint {install_state} {'' if is_install else 'un'}installed!"],
+            center_content=True,
+        )

kiauh/extensions/telegram_bot/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/extensions/telegram_bot/moonraker_telegram_bot.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -118,7 +118,7 @@ class MoonrakerTelegramBot:
         )
         env_file_content = env_file_content.replace(
             "%CFG%",
-            f"{self.base.cfg_dir}/printer.cfg",
+            self.cfg_file.as_posix()
         )
         env_file_content = env_file_content.replace(
             "%LOG%",

kiauh/extensions/telegram_bot/moonraker_telegram_bot_extension.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #

kiauh/main.py

@@ -1,20 +1,29 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
 #                                                                         #
 #  This file may be distributed under the terms of the GNU GPLv3 license  #
 # ======================================================================= #
+import io
+import sys
 
 from core.logger import Logger
 from core.menus.main_menu import MainMenu
 from core.settings.kiauh_settings import KiauhSettings
 
 
+def ensure_encoding() -> None:
+    if sys.stdout.encoding == "UTF-8" or not isinstance(sys.stdout, io.TextIOWrapper):
+        return
+    sys.stdout.reconfigure(encoding="utf-8")
+
+
 def main() -> None:
     try:
         KiauhSettings()
+        ensure_encoding()
         MainMenu().run()
     except KeyboardInterrupt:
         Logger.print_ok("\nHappy printing!\n", prefix=False)

kiauh/procedures/switch_repo.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -64,7 +64,7 @@ def run_switch_repo_routine(
 
     try:
         # step 2: backup old repo and env
-        org, repo = get_repo_name(repo_dir)
+        org, _ = get_repo_name(repo_dir)
         backup_dir = backup_dir.joinpath(org)
         bm = BackupManager()
         repo_dir_backup_path = bm.backup_directory(

kiauh/procedures/system.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #
@@ -31,7 +31,7 @@ def change_system_hostname() -> None:
             "http://<hostname>.local",
             "\n\n",
             "Example: If you set your hostname to 'my-printer', you can access an "
-            "installed webinterface by tyoing 'http://my-printer.local' in the "
+            "installed webinterface by typing 'http://my-printer.local' in the "
             "browser.",
         ],
         custom_title="CHANGE SYSTEM HOSTNAME",
@@ -51,7 +51,7 @@ def change_system_hostname() -> None:
     )
     hostname = get_string_input(
         "Enter the new hostname",
-        regex="^[a-z0-9]+([a-z0-9-]*[a-z0-9])?$",
+        regex=r"^[a-z0-9]+([a-z0-9-]*[a-z0-9])?$",
     )
     if not get_confirm(f"Change the hostname to '{hostname}'?", default_choice=False):
         Logger.print_info("Aborting hostname change ...")

kiauh/utils/__init__.py

@@ -1,5 +1,5 @@
 # ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#  Copyright (C) 2020 - 2025 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
 #  This file is part of KIAUH - Klipper Installation And Update Helper    #
 #  https://github.com/dw-0/kiauh                                          #