Merge 2aefd86040 into 4978f22101

Co-authored-by: dw-0 <th33xitus@gmail.com>
Co-authored-by: dw-0 <domwil1091+github@gmail.com>

kiauh/components/crowsnest/crowsnest.py

@@ -27,7 +27,6 @@ from components.crowsnest import (
 )
 from components.klipper.klipper import Klipper
 from core.backup_manager.backup_manager import BackupManager
-from core.constants import CURRENT_USER
 from core.logger import DialogType, Logger
 from core.settings.kiauh_settings import KiauhSettings
 from core.types.component_status import ComponentStatus
@@ -73,7 +72,7 @@ def install_crowsnest() -> None:
     Logger.print_info("Installer will prompt you for sudo password!")
     try:
         run(
-            f"sudo make install BASE_USER={CURRENT_USER}",
+            f"sudo make install",
             cwd=CROWSNEST_DIR,
             shell=True,
             check=True,

kiauh/components/klipper/__init__.py

@@ -25,6 +25,7 @@ KLIPPER_SERVICE_NAME = "klipper.service"
 
 # directories
 KLIPPER_DIR = Path.home().joinpath("klipper")
+KLIPPER_KCONFIGS_DIR = Path.home().joinpath("klipper-kconfigs")
 KLIPPER_ENV_DIR = Path.home().joinpath("klippy-env")
 KLIPPER_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("klipper-backups")
 

kiauh/components/klipper_firmware/firmware_utils.py

@@ -138,6 +138,7 @@ def start_flash_process(flash_options: FlashOptions) -> None:
         if flash_options.flash_method is FlashMethod.REGULAR:
             cmd = [
                 "make",
+                f"KCONFIG_CONFIG={flash_options.selected_kconfig}",
                 flash_options.flash_command.value,
                 f"FLASH_DEVICE={flash_options.selected_mcu}",
             ]
@@ -165,17 +166,17 @@ def start_flash_process(flash_options: FlashOptions) -> None:
         if rc != 0:
             raise Exception(f"Flashing failed with returncode: {rc}")
         else:
-            Logger.print_ok("Flashing successfull!", start="\n", end="\n\n")
+            Logger.print_ok("Flashing successful!", start="\n", end="\n\n")
 
     except (Exception, CalledProcessError):
         Logger.print_error("Flashing failed!", start="\n")
         Logger.print_error("See the console output above!", end="\n\n")
 
 
-def run_make_clean() -> None:
+def run_make_clean(kconfig = '.config') -> None:
     try:
         run(
-            "make clean",
+            f"make KCONFIG_CONFIG={kconfig} clean",
             cwd=KLIPPER_DIR,
             shell=True,
             check=True,
@@ -185,10 +186,10 @@ def run_make_clean() -> None:
         raise
 
 
-def run_make_menuconfig() -> None:
+def run_make_menuconfig(kconfig = '.config') -> None:
     try:
         run(
-            "make PYTHON=python3 menuconfig",
+            f"make PYTHON=python3 KCONFIG_CONFIG={kconfig} menuconfig",
             cwd=KLIPPER_DIR,
             shell=True,
             check=True,
@@ -198,10 +199,10 @@ def run_make_menuconfig() -> None:
         raise
 
 
-def run_make() -> None:
+def run_make(kconfig = '.config') -> None:
     try:
         run(
-            "make PYTHON=python3",
+            f"make PYTHON=python3 KCONFIG_CONFIG={kconfig}",
             cwd=KLIPPER_DIR,
             shell=True,
             check=True,

kiauh/components/klipper_firmware/flash_options.py

@@ -39,6 +39,7 @@ class FlashOptions:
     _selected_mcu: str = ""
     _selected_board: str = ""
     _selected_baudrate: int = 250000
+    _selected_kconfig: str = ".config"
 
     def __new__(cls, *args, **kwargs):
         if not cls._instance:
@@ -104,3 +105,11 @@ class FlashOptions:
     @selected_baudrate.setter
     def selected_baudrate(self, value: int) -> None:
         self._selected_baudrate = value
+
+    @property
+    def selected_kconfig(self) -> str:
+        return self._selected_kconfig
+
+    @selected_kconfig.setter
+    def selected_kconfig(self, value: str) -> None:
+        self._selected_kconfig = value

kiauh/components/klipper_firmware/menus/klipper_build_menu.py

@@ -10,34 +10,121 @@ from __future__ import annotations
 
 import textwrap
 from typing import List, Set, Type
+from os import path, listdir, mkdir
+from shutil import copyfile
 
-from components.klipper import KLIPPER_DIR
+from components.klipper import KLIPPER_DIR, KLIPPER_KCONFIGS_DIR
 from components.klipper_firmware.firmware_utils import (
     run_make,
     run_make_clean,
     run_make_menuconfig,
 )
-from core.logger import Logger
+from components.klipper_firmware.flash_options import FlashOptions
+from core.logger import DialogType, Logger
 from core.menus import Option
-from core.menus.base_menu import BaseMenu
+from core.menus.base_menu import BaseMenu, print_back_footer
 from core.types.color import Color
 from utils.sys_utils import (
     check_package_install,
     install_system_packages,
     update_system_package_lists,
 )
+from utils.input_utils import get_confirm, get_string_input, get_selection_input
 
 
 # noinspection PyUnusedLocal
 # noinspection PyMethodMayBeStatic
-class KlipperBuildFirmwareMenu(BaseMenu):
+class KlipperKConfigMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
+        super().__init__()
+        self.title = "Firmware Config Menu"
+        self.title_color = Color.CYAN
+        self.previous_menu: Type[BaseMenu] | None = previous_menu
+        self.flash_options = FlashOptions()
+        self.kconfigs_dirname = KLIPPER_KCONFIGS_DIR
+        self.kconfig_default = path.join(KLIPPER_DIR, ".config")
+        self.kconfig = self.kconfig_default if not path.isdir(self.kconfigs_dirname) else None
+
+    def run(self) -> None:
+        if not self.kconfig:
+            super().run()
+        else:
+            self.flash_options.selected_kconfig = self.kconfig
+
+    def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
+        from core.menus.advanced_menu import AdvancedMenu
+
+        self.previous_menu = (
+            previous_menu if previous_menu is not None else AdvancedMenu
+        )
+
+    def set_options(self) -> None:
+        if not path.isdir(self.kconfigs_dirname):
+            return
+
+        self.input_label_txt = "Select config or action to continue (default=n)"
+        self.default_option = Option(method=self.select_config, opt_data=self.kconfig_default)
+
+        self.configs = []
+        option_index = 1
+        for kconfig in listdir(self.kconfigs_dirname):
+            if not kconfig.endswith(".config"):
+                continue
+            kconfig_path = path.join(self.kconfigs_dirname, kconfig)
+            if path.isfile(kconfig_path):
+                self.configs += [kconfig]
+                self.options[str(option_index)] = Option(method=self.select_config, opt_data=kconfig_path)
+                option_index += 1
+        self.options['n'] = Option(method=self.select_config, opt_data=self.kconfig_default)
+
+    def print_menu(self) -> None:
+        menu = textwrap.dedent(
+            """
+            ╟───────────────────────────────────────────────────────╢
+            ║ Found previously saved firmware configs               ║
+            ║                                                       ║
+            ║ You can select existing firmware config or create a   ║
+            ║ new one.                                              ║
+            ║                                                       ║
+            """
+        )[1:]
+
+        
+        start_index = 1
+        for i, s in enumerate(self.configs):
+            line = f"{start_index + i}) {s}"
+            menu += f"║ {line:<54}║\n"
+            
+        new_config = Color.apply("n) New firmware config", Color.YELLOW)
+        menu += f"║ {new_config:<63}║\n"
+
+        menu += "║                                                       ║\n"
+        menu += "╟───────────────────────────────────────────────────────╢\n"
+
+        print(menu, end="")
+
+    def select_config(self, **kwargs) -> None:
+        selection: str | None = kwargs.get("opt_data", None)
+        if selection is None:
+            raise Exception("opt_data is None")
+        if not path.isfile(selection):
+            raise Exception("opt_data does not exists")
+        self.kconfig = selection
+
+# noinspection PyUnusedLocal
+# noinspection PyMethodMayBeStatic
+class KlipperBuildFirmwareMenu(BaseMenu):
+    def __init__(self, kconfig: str | None = None, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
         self.title = "Build Firmware Menu"
         self.title_color = Color.CYAN
         self.previous_menu: Type[BaseMenu] | None = previous_menu
         self.deps: Set[str] = {"build-essential", "dpkg-dev", "make"}
         self.missing_deps: List[str] = check_package_install(self.deps)
+        self.flash_options = FlashOptions()
+        self.kconfigs_dirname = KLIPPER_KCONFIGS_DIR
+        self.kconfig_default = path.join(KLIPPER_DIR, ".config")
+        self.kconfig = self.flash_options.selected_kconfig
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
         from core.menus.advanced_menu import AdvancedMenu
@@ -67,7 +154,7 @@ class KlipperBuildFirmwareMenu(BaseMenu):
             status_ok = Color.apply("*INSTALLED*", Color.GREEN)
             status_missing = Color.apply("*MISSING*", Color.RED)
             status = status_missing if d in self.missing_deps else status_ok
-            padding = 39 - len(d) + len(status) + (len(status_ok) - len(status))
+            padding = 40 - len(d) + len(status) + (len(status_ok) - len(status))
             d = Color.apply(f"● {d}", Color.CYAN)
             menu += f"║ {d}{status:>{padding}} ║\n"
         menu += "║                                                       ║\n"
@@ -98,13 +185,16 @@ class KlipperBuildFirmwareMenu(BaseMenu):
 
     def start_build_process(self, **kwargs) -> None:
         try:
-            run_make_clean()
+            run_make_clean(self.kconfig)
-            run_make_menuconfig()
+            run_make_menuconfig(self.kconfig)
-            run_make()
+            run_make(self.kconfig)
 
             Logger.print_ok("Firmware successfully built!")
             Logger.print_ok(f"Firmware file located in '{KLIPPER_DIR}/out'!")
 
+            if self.kconfig == self.kconfig_default:
+                self.save_firmware_config()
+
         except Exception as e:
             Logger.print_error(e)
             Logger.print_error("Building Klipper Firmware failed!")
@@ -112,3 +202,57 @@ class KlipperBuildFirmwareMenu(BaseMenu):
         finally:
             if self.previous_menu is not None:
                 self.previous_menu().run()
+                
+    def save_firmware_config(self) -> None:
+        Logger.print_dialog(
+            DialogType.CUSTOM,
+            [
+                "You can save the firmware build configs for multiple MCUs,"
+                " and use them to update the firmware after a Klipper version upgrade"
+            ],
+            custom_title="Save firmware config",
+        )
+        if not get_confirm("Do you want to save firmware config?", default_choice=False):
+            return
+
+        filename = self.kconfig_default
+        while True:
+            Logger.print_dialog(
+                DialogType.CUSTOM,
+                [
+                    "Allowed characters: a-z, 0-9 and '-'",
+                    "The name must not contain the following:",
+                    "\n\n",
+                    "● Any special characters",
+                    "● No leading or trailing '-'",
+                ],
+            )
+            input_name = get_string_input(
+                "Enter the new firmware config name",
+                regex=r"^[a-z0-9]+([a-z0-9-]*[a-z0-9])?$",
+            )
+            filename = path.join(self.kconfigs_dirname, f"{input_name}.config")
+
+            if path.isfile(filename):
+                if get_confirm(f"Firmware config {input_name} already exists, overwrite?", default_choice=False):
+                    break
+
+            if path.isdir(filename):
+                Logger.print_error(f"Path {filename} exists and it's a directory")
+
+            if not path.exists(filename):
+                break
+
+        if not get_confirm(f"Save firmware config to '{filename}'?", default_choice=True):
+            Logger.print_info("Aborted saving firmware config ...")
+            return
+        
+        if not path.exists(self.kconfigs_dirname):
+            mkdir(self.kconfigs_dirname)
+        
+        copyfile(self.kconfig_default, filename)
+
+        Logger.print_ok()
+        Logger.print_ok(f"Firmware config successfully saved to {filename}")
+
+

kiauh/components/klipper_firmware/menus/klipper_flash_menu.py

@@ -11,6 +11,7 @@ from __future__ import annotations
 import textwrap
 import time
 from typing import Type
+from os.path import basename
 
 from components.klipper_firmware.firmware_utils import (
     find_firmware_file,
@@ -36,6 +37,7 @@ from components.klipper_firmware.menus.klipper_flash_help_menu import (
     KlipperFlashMethodHelpMenu,
     KlipperMcuConnectionHelpMenu,
 )
+from components.klipper_firmware.menus.klipper_build_menu import KlipperKConfigMenu
 from core.logger import DialogType, Logger
 from core.menus import FooterType, Option
 from core.menus.base_menu import BaseMenu, MenuTitleStyle
@@ -420,6 +422,7 @@ class KlipperFlashOverviewMenu(BaseMenu):
         mcu = self.flash_options.selected_mcu.split("/")[-1]
         board = self.flash_options.selected_board
         baudrate = self.flash_options.selected_baudrate
+        kconfig = basename(self.flash_options.selected_kconfig)
         color = Color.CYAN
         subheader = f"[{Color.apply('Overview', color)}]"
         menu = textwrap.dedent(
@@ -452,6 +455,13 @@ class KlipperFlashOverviewMenu(BaseMenu):
                 """
             )[1:]
 
+        if self.flash_options.flash_method is FlashMethod.REGULAR:
+            menu += textwrap.dedent(
+                f"""
+                ║ Firmware config: {Color.apply(f"{kconfig:<36}", color)} ║
+                """
+            )[1:]
+
         menu += textwrap.dedent(
             """
             ║                                                       ║

kiauh/components/webui_client/client_setup.py

@@ -144,7 +144,7 @@ def install_client(
         custom_color=Color.GREEN,
         center_content=True,
         content=[
-            f"Open {client.display_name} now on: http://{get_ipv4_addr()}:{port}",
+            f"Open {client.display_name} now on: http://{get_ipv4_addr()}{'' if port == 80 else f':{port}'}",
         ],
     )
 

kiauh/core/menus/advanced_menu.py

@@ -14,6 +14,7 @@ from typing import Type
 from components.klipper import KLIPPER_DIR
 from components.klipper.klipper import Klipper
 from components.klipper_firmware.menus.klipper_build_menu import (
+    KlipperKConfigMenu,
     KlipperBuildFirmwareMenu,
 )
 from components.klipper_firmware.menus.klipper_flash_menu import (
@@ -76,12 +77,15 @@ class AdvancedMenu(BaseMenu):
         rollback_repository(MOONRAKER_DIR, Moonraker)
 
     def build(self, **kwargs) -> None:
+        KlipperKConfigMenu().run()
         KlipperBuildFirmwareMenu(previous_menu=self.__class__).run()
 
     def flash(self, **kwargs) -> None:
+        KlipperKConfigMenu().run()
         KlipperFlashMethodMenu(previous_menu=self.__class__).run()
 
     def build_flash(self, **kwargs) -> None:
+        KlipperKConfigMenu().run()
         KlipperBuildFirmwareMenu(previous_menu=KlipperFlashMethodMenu).run()
         KlipperFlashMethodMenu(previous_menu=self.__class__).run()
 

kiauh/core/menus/settings_menu.py

@@ -21,9 +21,7 @@ from core.menus import Option
 from core.menus.base_menu import BaseMenu
 from core.settings.kiauh_settings import KiauhSettings, RepoSettings
 from core.types.color import Color
-from core.types.component_status import ComponentStatus
 from procedures.switch_repo import run_switch_repo_routine
-from utils.git_utils import get_repo_name
 from utils.input_utils import get_confirm, get_string_input
 
 
@@ -141,12 +139,12 @@ class SettingsMenu(BaseMenu):
 
         repo = get_string_input(
             "Enter new repository URL",
-            regex="^[\w/.:-]+$",
+            regex=r"^[\w/.:-]+$",
             default=KLIPPER_REPO_URL if repo_name == "klipper" else MOONRAKER_REPO_URL,
         )
         branch = get_string_input(
             "Enter new branch name",
-            regex="^.+$",
+            regex=r"^.+$",
             default="master"
         )
 

kiauh/procedures/system.py

@@ -31,7 +31,7 @@ def change_system_hostname() -> None:
             "http://<hostname>.local",
             "\n\n",
             "Example: If you set your hostname to 'my-printer', you can access an "
-            "installed webinterface by tyoing 'http://my-printer.local' in the "
+            "installed webinterface by typing 'http://my-printer.local' in the "
             "browser.",
         ],
         custom_title="CHANGE SYSTEM HOSTNAME",
@@ -51,7 +51,7 @@ def change_system_hostname() -> None:
     )
     hostname = get_string_input(
         "Enter the new hostname",
-        regex="^[a-z0-9]+([a-z0-9-]*[a-z0-9])?$",
+        regex=r"^[a-z0-9]+([a-z0-9-]*[a-z0-9])?$",
     )
     if not get_confirm(f"Change the hostname to '{hostname}'?", default_choice=False):
         Logger.print_info("Aborting hostname change ...")

scripts/crowsnest.sh

@@ -105,7 +105,7 @@ function install_crowsnest(){
   pushd "${HOME}/crowsnest" &> /dev/null || exit 1
   title_msg "Installer will prompt you for sudo password!"
   status_msg "Launching crowsnest installer ..."
-  if ! sudo make install BASE_USER=$USER; then
+  if ! sudo make install; then
     error_msg "Something went wrong! Please try again..."
     exit 1
   fi