Merge 1620efe56c into b6c6edb622

Signed-off-by: Dominik Willner <th33xitus@gmail.com>

.github/FUNDING.yml

@@ -9,4 +9,4 @@ community_bridge: # Replace with a single Community Bridge project-name e.g., cl
 liberapay: # Replace with a single Liberapay username
 issuehunt: # Replace with a single IssueHunt username
 otechie: # Replace with a single Otechie username
-custom: # Replace with up to 4 custom sponsorship URLs e.g., ['link1', 'link2']
+custom: https://paypal.me/dwillner0

.gitignore

@@ -1,3 +1,4 @@
+.idea
 .vscode
 .idea
 .pytest_cache

README.md

@@ -29,7 +29,7 @@
 ### 📋 Prerequisites
 KIAUH is a script that assists you in installing Klipper on a Linux operating system that has
 already been flashed to your Raspberry Pi's (or other SBC's) SD card. As a result, you must ensure 
-that you have a functional Linux system on hand. `Raspberry Pi OS Lite (32bit)` is a recommended Linux image 
+that you have a functional Linux system on hand. `Raspberry Pi OS Lite (either 32bit or 64bit)` is a recommended Linux image 
 if you are using a Raspberry Pi. The [official Raspberry Pi Imager](https://www.raspberrypi.com/software/) 
 is the simplest way to flash an image like this to an SD card.
 
@@ -39,7 +39,7 @@ select `Choose OS -> Raspberry Pi OS (other)`: \
   <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/rpi_imager1.png" alt="KIAUH logo" height="350">
 </p>
 
-* Then select `Raspberry Pi OS Lite (32bit)`:
+* Then select `Raspberry Pi OS Lite (32bit)` (or 64bit if you want to use that instead):
 <p align="center">
   <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/rpi_imager2.png" alt="KIAUH logo" height="350">
 </p>
@@ -125,7 +125,7 @@ prompt and confirm by hitting ENTER.
 <tr>
 <th><img src="https://raw.githubusercontent.com/fluidd-core/fluidd/master/docs/assets/images/logo.svg" alt="Fluidd Logo" height="64"></th>
 <th><img src="https://avatars.githubusercontent.com/u/31575189?v=4" alt="jordanruthe avatar" height="64"></th>
-<th><img src="https://camo.githubusercontent.com/627be7fc67195b626b298af9b9677d7c58e698c67305e54324cffbe06130d4a4/68747470733a2f2f6f63746f7072696e742e6f72672f6173736574732f696d672f6c6f676f2e706e67" alt="OctoPrint Logo" height="64"></th>
+<th><img src="https://raw.githubusercontent.com/OctoPrint/OctoPrint/master/docs/images/octoprint-logo.png" alt="OctoPrint Logo" height="64"></th>
 </tr>
 <tr>
 <th>by <a href="https://github.com/fluidd-core">fluidd-core</a></th>

kiauh.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

kiauh/components/fluidd/__init__.py

@@ -1,26 +0,0 @@
-#!/usr/bin/env python3
-
-# ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-from pathlib import Path
-
-from core.backup_manager import BACKUP_ROOT_DIR
-
-MODULE_PATH = Path(__file__).resolve().parent
-FLUIDD_DIR = Path.home().joinpath("fluidd")
-FLUIDD_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("fluidd-backups")
-FLUIDD_CONFIG_DIR = Path.home().joinpath("fluidd-config")
-FLUIDD_NGINX_CFG = Path("/etc/nginx/sites-enabled/fluidd")
-FLUIDD_URL = "https://github.com/fluidd-core/fluidd/releases/latest/download/fluidd.zip"
-FLUIDD_UNSTABLE_URL = (
-    "https://github.com/fluidd-core/fluidd/releases/download/%TAG%/fluidd.zip"
-)
-FLUIDD_CONFIG_REPO_URL = "https://github.com/fluidd-core/fluidd-config.git"
-

kiauh/components/fluidd/assets/fluidd-config-updater.conf

@@ -1,6 +0,0 @@
-[update_manager fluidd-config]
-type: git_repo
-primary_branch: master
-path: ~/fluidd-config
-origin: https://github.com/fluidd-core/fluidd-config.git
-managed_services: klipper

kiauh/components/fluidd/assets/fluidd-updater.conf

@@ -1,5 +0,0 @@
-[update_manager fluidd]
-type: web
-channel: stable
-repo: fluidd-core/fluidd
-path: ~/fluidd

kiauh/components/fluidd/fluidd_remove.py

@@ -1,160 +0,0 @@
-#!/usr/bin/env python3
-
-# ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-
-import shutil
-import subprocess
-from pathlib import Path
-from typing import List
-
-from components.klipper.klipper import Klipper
-from components.fluidd import FLUIDD_DIR, FLUIDD_CONFIG_DIR
-from components.moonraker.moonraker import Moonraker
-from core.config_manager.config_manager import ConfigManager
-from core.instance_manager.instance_manager import InstanceManager
-from utils import NGINX_SITES_AVAILABLE, NGINX_SITES_ENABLED
-from utils.filesystem_utils import remove_file
-from utils.logger import Logger
-
-
-def run_fluidd_removal(
-    remove_fluidd: bool,
-    remove_fl_config: bool,
-    remove_mr_updater_section: bool,
-    remove_flc_printer_cfg_include: bool,
-) -> None:
-    if remove_fluidd:
-        remove_fluidd_dir()
-        remove_nginx_config()
-        remove_nginx_logs()
-        if remove_mr_updater_section:
-            remove_updater_section("update_manager fluidd")
-    if remove_fl_config:
-        remove_fluidd_cfg_dir()
-        remove_fluidd_cfg_symlink()
-        if remove_mr_updater_section:
-            remove_updater_section("update_manager fluidd-config")
-        if remove_flc_printer_cfg_include:
-            remove_printer_cfg_include()
-
-
-def remove_fluidd_dir() -> None:
-    Logger.print_status("Removing Fluidd ...")
-    if not FLUIDD_DIR.exists():
-        Logger.print_info(f"'{FLUIDD_DIR}' does not exist. Skipping ...")
-        return
-
-    try:
-        shutil.rmtree(FLUIDD_DIR)
-    except OSError as e:
-        Logger.print_error(f"Unable to delete '{FLUIDD_DIR}':\n{e}")
-
-
-def remove_nginx_config() -> None:
-    Logger.print_status("Removing Fluidd NGINX config ...")
-    try:
-        remove_file(NGINX_SITES_AVAILABLE.joinpath("fluidd"), True)
-        remove_file(NGINX_SITES_ENABLED.joinpath("fluidd"), True)
-
-    except subprocess.CalledProcessError as e:
-        log = f"Unable to remove Fluidd NGINX config:\n{e.stderr.decode()}"
-        Logger.print_error(log)
-
-
-def remove_nginx_logs() -> None:
-    Logger.print_status("Removing Fluidd NGINX logs ...")
-    try:
-        remove_file(Path("/var/log/nginx/fluidd-access.log"), True)
-        remove_file(Path("/var/log/nginx/fluidd-error.log"), True)
-
-        im = InstanceManager(Klipper)
-        instances: List[Klipper] = im.instances
-        if not instances:
-            return
-
-        for instance in instances:
-            remove_file(instance.log_dir.joinpath("fluidd-access.log"))
-            remove_file(instance.log_dir.joinpath("fluidd-error.log"))
-
-    except (OSError, subprocess.CalledProcessError) as e:
-        Logger.print_error(f"Unable to NGINX logs:\n{e}")
-
-
-def remove_updater_section(name: str) -> None:
-    Logger.print_status("Remove updater section from moonraker.conf ...")
-    im = InstanceManager(Moonraker)
-    instances: List[Moonraker] = im.instances
-    if not instances:
-        Logger.print_info("Moonraker not installed. Skipped ...")
-        return
-
-    for instance in instances:
-        Logger.print_status(f"Remove section '{name}' in '{instance.cfg_file}' ...")
-
-        if not instance.cfg_file.is_file():
-            Logger.print_info(f"'{instance.cfg_file}' does not exist. Skipped ...")
-            continue
-
-        cm = ConfigManager(instance.cfg_file)
-        if not cm.config.has_section(name):
-            Logger.print_info("Section not present. Skipped ...")
-            continue
-
-        cm.config.remove_section(name)
-        cm.write_config()
-
-
-def remove_fluidd_cfg_dir() -> None:
-    Logger.print_status("Removing fluidd-config ...")
-    if not FLUIDD_CONFIG_DIR.exists():
-        Logger.print_info(f"'{FLUIDD_CONFIG_DIR}' does not exist. Skipping ...")
-        return
-
-    try:
-        shutil.rmtree(FLUIDD_CONFIG_DIR)
-    except OSError as e:
-        Logger.print_error(f"Unable to delete '{FLUIDD_CONFIG_DIR}':\n{e}")
-
-
-def remove_fluidd_cfg_symlink() -> None:
-    Logger.print_status("Removing fluidd.cfg symlinks ...")
-    im = InstanceManager(Klipper)
-    instances: List[Klipper] = im.instances
-    for instance in instances:
-        Logger.print_status(f"Removing symlink from '{instance.cfg_file}' ...")
-        try:
-            remove_file(instance.cfg_dir.joinpath("fluidd.cfg"))
-        except subprocess.CalledProcessError:
-            Logger.print_error("Failed to remove symlink!")
-
-
-def remove_printer_cfg_include() -> None:
-    Logger.print_status("Remove fluidd-config include from printer.cfg ...")
-    im = InstanceManager(Klipper)
-    instances: List[Klipper] = im.instances
-    if not instances:
-        Logger.print_info("Klipper not installed. Skipping ...")
-        return
-
-    for instance in instances:
-        log = f"Removing include from '{instance.cfg_file}' ..."
-        Logger.print_status(log)
-
-        if not instance.cfg_file.is_file():
-            continue
-
-        cm = ConfigManager(instance.cfg_file)
-        if not cm.config.has_section("include fluidd.cfg"):
-            Logger.print_info("Section not present. Skipped ...")
-            continue
-
-        cm.config.remove_section("include fluidd.cfg")
-        cm.write_config()

kiauh/components/fluidd/fluidd_setup.py

@@ -1,242 +0,0 @@
-#!/usr/bin/env python3
-
-# ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-import subprocess
-from pathlib import Path
-from typing import List
-
-from components.fluidd import (
-    FLUIDD_URL,
-    FLUIDD_CONFIG_REPO_URL,
-    FLUIDD_CONFIG_DIR,
-    FLUIDD_DIR,
-    MODULE_PATH,
-)
-from components.fluidd.fluidd_dialogs import (
-    print_fluidd_already_installed_dialog,
-    print_install_fluidd_config_dialog,
-    print_fluidd_port_select_dialog,
-    print_moonraker_not_found_dialog,
-)
-from components.fluidd.fluidd_utils import symlink_webui_nginx_log
-from kiauh import KIAUH_CFG
-from components.klipper.klipper import Klipper
-from components.moonraker.moonraker import Moonraker
-from core.config_manager.config_manager import ConfigManager
-from core.instance_manager.instance_manager import InstanceManager
-from core.repo_manager.repo_manager import RepoManager
-from utils import NGINX_SITES_AVAILABLE, NGINX_SITES_ENABLED
-from utils.common import check_install_dependencies
-from utils.filesystem_utils import (
-    unzip,
-    copy_upstream_nginx_cfg,
-    copy_common_vars_nginx_cfg,
-    create_nginx_cfg,
-    create_symlink,
-    remove_file,
-    read_ports_from_nginx_configs,
-    get_next_free_port, is_valid_port,
-    )
-from utils.input_utils import get_confirm, get_number_input
-from utils.logger import Logger
-from utils.system_utils import (
-    download_file,
-    set_nginx_permissions,
-    get_ipv4_addr,
-    control_systemd_service,
-)
-
-
-def install_fluidd() -> None:
-    mr_im = InstanceManager(Moonraker)
-    mr_instances: List[Moonraker] = mr_im.instances
-
-    if not mr_instances:
-        print_moonraker_not_found_dialog()
-        if not get_confirm("Continue Fluidd installation?", allow_go_back=True):
-            return
-
-    if Path.home().joinpath("fluidd").exists():
-        print_fluidd_already_installed_dialog()
-        do_reinstall = get_confirm("Re-install Fluidd?", allow_go_back=True)
-        if not do_reinstall:
-            return
-
-    kl_im = InstanceManager(Klipper)
-    kl_instances = kl_im.instances
-    install_fl_config = False
-    if kl_instances:
-        print_install_fluidd_config_dialog()
-        question = "Download the recommended macros?"
-        install_fl_config = get_confirm(question, allow_go_back=False)
-
-    cm = ConfigManager(cfg_file=KIAUH_CFG)
-    fluidd_port = cm.get_value("fluidd", "port")
-    ports_in_use = read_ports_from_nginx_configs()
-
-    # check if configured port is a valid number and not in use already
-    valid_port = is_valid_port(fluidd_port, ports_in_use)
-    while not valid_port:
-        next_port = get_next_free_port(ports_in_use)
-        print_fluidd_port_select_dialog(next_port, ports_in_use)
-        fluidd_port = str(get_number_input(
-            "Configure Fluidd for port",
-            min_count=int(next_port),
-            default=next_port,
-        ))
-        valid_port = is_valid_port(fluidd_port, ports_in_use)
-
-    check_install_dependencies(["nginx"])
-
-    try:
-        download_fluidd()
-        if mr_instances:
-            patch_moonraker_conf(
-                mr_instances,
-                "Fluidd",
-                "update_manager fluidd",
-                "fluidd-updater.conf",
-            )
-            mr_im.restart_all_instance()
-        if install_fl_config and kl_instances:
-            download_fluidd_cfg()
-            create_fluidd_cfg_symlink(kl_instances)
-            patch_moonraker_conf(
-                mr_instances,
-                "fluidd-config",
-                "update_manager fluidd-config",
-                "fluidd-config-updater.conf",
-            )
-            patch_printer_config(kl_instances)
-            kl_im.restart_all_instance()
-
-        copy_upstream_nginx_cfg()
-        copy_common_vars_nginx_cfg()
-        create_fluidd_nginx_cfg(fluidd_port)
-        if kl_instances:
-            symlink_webui_nginx_log(kl_instances)
-        control_systemd_service("nginx", "restart")
-
-    except Exception as e:
-        Logger.print_error(f"Fluidd installation failed!\n{e}")
-        return
-
-    log = f"Open Fluidd now on: http://{get_ipv4_addr()}:{fluidd_port}"
-    Logger.print_ok("Fluidd installation complete!", start="\n")
-    Logger.print_ok(log, prefix=False, end="\n\n")
-
-
-def download_fluidd() -> None:
-    try:
-        Logger.print_status("Downloading Fluidd ...")
-        target = Path.home().joinpath("fluidd.zip")
-        download_file(FLUIDD_URL, target, True)
-        Logger.print_ok("Download complete!")
-
-        Logger.print_status("Extracting fluidd.zip ...")
-        unzip(Path.home().joinpath("fluidd.zip"), FLUIDD_DIR)
-        target.unlink(missing_ok=True)
-        Logger.print_ok("OK!")
-
-    except Exception:
-        Logger.print_error("Downloading Fluidd failed!")
-        raise
-
-
-def update_fluidd() -> None:
-    Logger.print_status("Updating Fluidd ...")
-    download_fluidd()
-
-
-def download_fluidd_cfg() -> None:
-    try:
-        Logger.print_status("Downloading fluidd-config ...")
-        rm = RepoManager(FLUIDD_CONFIG_REPO_URL, target_dir=FLUIDD_CONFIG_DIR)
-        rm.clone_repo()
-    except Exception:
-        Logger.print_error("Downloading fluidd-config failed!")
-        raise
-
-
-def create_fluidd_cfg_symlink(klipper_instances: List[Klipper]) -> None:
-    Logger.print_status("Create symlink of fluidd.cfg ...")
-    source = Path(FLUIDD_CONFIG_DIR, "fluidd.cfg")
-    for instance in klipper_instances:
-        target = instance.cfg_dir
-        Logger.print_status(f"Linking {source} to {target}")
-        try:
-            create_symlink(source, target)
-        except subprocess.CalledProcessError:
-            Logger.print_error("Creating symlink failed!")
-
-
-def create_fluidd_nginx_cfg(port: int) -> None:
-    root_dir = FLUIDD_DIR
-    source = NGINX_SITES_AVAILABLE.joinpath("fluidd")
-    target = NGINX_SITES_ENABLED.joinpath("fluidd")
-    try:
-        Logger.print_status("Creating NGINX config for Fluidd ...")
-        remove_file(Path("/etc/nginx/sites-enabled/default"), True)
-        create_nginx_cfg("fluidd", port, root_dir)
-        create_symlink(source, target, True)
-        set_nginx_permissions()
-        Logger.print_ok("NGINX config for Fluidd successfully created.")
-    except Exception:
-        Logger.print_error("Creating NGINX config for Fluidd failed!")
-        raise
-
-
-# TODO: could be fully extracted, its webui agnostic, and used for mainsail and fluidd
-def patch_moonraker_conf(
-    moonraker_instances: List[Moonraker],
-    name: str,
-    section_name: str,
-    template_file: str,
-) -> None:
-    for instance in moonraker_instances:
-        cfg_file = instance.cfg_file
-        Logger.print_status(f"Add {name} update section to '{cfg_file}' ...")
-
-        if not Path(cfg_file).exists():
-            Logger.print_warn(f"'{cfg_file}' not found!")
-            return
-
-        cm = ConfigManager(cfg_file)
-        if cm.config.has_section(section_name):
-            Logger.print_info("Section already exist. Skipped ...")
-            return
-
-        template = MODULE_PATH.joinpath("assets", template_file)
-        with open(template, "r") as t:
-            template_content = "\n"
-            template_content += t.read()
-
-        with open(cfg_file, "a") as f:
-            f.write(template_content)
-
-
-# TODO: could be made fully webui agnostic and extracted, and used for mainsail and fluidd
-def patch_printer_config(klipper_instances: List[Klipper]) -> None:
-    for instance in klipper_instances:
-        cfg_file = instance.cfg_file
-        Logger.print_status(f"Including fluidd-config in '{cfg_file}' ...")
-
-        if not Path(cfg_file).exists():
-            Logger.print_warn(f"'{cfg_file}' not found!")
-            return
-
-        cm = ConfigManager(cfg_file)
-        if cm.config.has_section("include fluidd.cfg"):
-            Logger.print_info("Section already exist. Skipped ...")
-            return
-
-        with open(cfg_file, "a") as f:
-            f.write("\n[include fluidd.cfg]")

kiauh/components/fluidd/fluidd_utils.py

@@ -1,79 +0,0 @@
-#!/usr/bin/env python3
-
-# ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-import json
-import urllib.request
-from json import JSONDecodeError
-from pathlib import Path
-from typing import List
-
-from components.fluidd import FLUIDD_DIR, FLUIDD_BACKUP_DIR
-from components.klipper.klipper import Klipper
-from core.backup_manager.backup_manager import BackupManager
-from utils import NGINX_SITES_AVAILABLE, NGINX_CONFD
-from utils.common import get_install_status_webui
-from utils.logger import Logger
-
-
-# TODO: could be extracted and made generic
-def get_fluidd_status() -> str:
-    return get_install_status_webui(
-        FLUIDD_DIR,
-        NGINX_SITES_AVAILABLE.joinpath("fluidd"),
-        NGINX_CONFD.joinpath("upstreams.conf"),
-        NGINX_CONFD.joinpath("common_vars.conf"),
-    )
-
-
-# TODO: could be extracted and made generic
-def symlink_webui_nginx_log(klipper_instances: List[Klipper]) -> None:
-    Logger.print_status("Link NGINX logs into log directory ...")
-    access_log = Path("/var/log/nginx/fluidd-access.log")
-    error_log = Path("/var/log/nginx/fluidd-error.log")
-
-    for instance in klipper_instances:
-        desti_access = instance.log_dir.joinpath("fluidd-access.log")
-        if not desti_access.exists():
-            desti_access.symlink_to(access_log)
-
-        desti_error = instance.log_dir.joinpath("fluidd-error.log")
-        if not desti_error.exists():
-            desti_error.symlink_to(error_log)
-
-
-# TODO: could be extracted and made generic
-def get_fluidd_local_version() -> str:
-    relinfo_file = FLUIDD_DIR.joinpath("release_info.json")
-    if not relinfo_file.is_file():
-        return "-"
-
-    with open(relinfo_file, "r") as f:
-        return json.load(f)["version"]
-
-
-# TODO: could be extracted and made generic
-def get_fluidd_remote_version() -> str:
-    url = "https://api.github.com/repos/fluidd-core/fluidd/tags"
-    try:
-        with urllib.request.urlopen(url) as response:
-            data = json.loads(response.read())
-        return data[0]["name"]
-    except (JSONDecodeError, TypeError):
-        return "ERROR"
-
-
-# TODO: could be extracted and made generic
-def backup_fluidd_data() -> None:
-    with open(FLUIDD_DIR.joinpath(".version"), "r") as v:
-        version = v.readlines()[0]
-    bm = BackupManager()
-    bm.backup_directory(f"fluidd-{version}", FLUIDD_DIR, FLUIDD_BACKUP_DIR)
-    bm.backup_file(NGINX_SITES_AVAILABLE.joinpath("fluidd"), FLUIDD_BACKUP_DIR)

kiauh/components/fluidd/menus/fluidd_remove_menu.py

@@ -1,111 +0,0 @@
-#!/usr/bin/env python3
-
-# ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-import textwrap
-
-from components.fluidd import fluidd_remove
-from core.menus import BACK_HELP_FOOTER
-from core.menus.base_menu import BaseMenu
-from utils.constants import RESET_FORMAT, COLOR_RED, COLOR_CYAN
-
-
-# noinspection PyUnusedLocal
-class FluiddRemoveMenu(BaseMenu):
-    def __init__(self):
-        super().__init__(
-            header=False,
-            options={
-                "0": self.toggle_all,
-                "1": self.toggle_remove_fluidd,
-                "2": self.toggle_remove_fl_config,
-                "3": self.toggle_remove_updater_section,
-                "4": self.toggle_remove_printer_cfg_include,
-                "5": self.run_removal_process,
-            },
-            footer_type=BACK_HELP_FOOTER,
-        )
-        self.remove_fluidd = False
-        self.remove_fl_config = False
-        self.remove_updater_section = False
-        self.remove_printer_cfg_include = False
-
-    def print_menu(self) -> None:
-        header = " [ Remove Fluidd ] "
-        color = COLOR_RED
-        count = 62 - len(color) - len(RESET_FORMAT)
-        checked = f"[{COLOR_CYAN}x{RESET_FORMAT}]"
-        unchecked = "[ ]"
-        o1 = checked if self.remove_fluidd else unchecked
-        o2 = checked if self.remove_fl_config else unchecked
-        o3 = checked if self.remove_updater_section else unchecked
-        o4 = checked if self.remove_printer_cfg_include else unchecked
-        menu = textwrap.dedent(
-            f"""
-            /=======================================================\\
-            | {color}{header:~^{count}}{RESET_FORMAT} |
-            |-------------------------------------------------------|
-            | Enter a number and hit enter to select / deselect     |
-            | the specific option for removal.                      |
-            |-------------------------------------------------------|
-            |  0) Select everything                                 |
-            |-------------------------------------------------------|
-            |  1) {o1} Remove Fluidd                                 |
-            |  2) {o2} Remove fluidd-config                          |
-            |                                                       |
-            |  printer.cfg & moonraker.conf                         |
-            |  3) {o3} Remove Moonraker update section               |
-            |  4) {o4} Remove printer.cfg include                    |
-            |-------------------------------------------------------|
-            |  5) Continue                                          |
-            """
-        )[1:]
-        print(menu, end="")
-
-    def toggle_all(self, **kwargs) -> None:
-        self.remove_fluidd = True
-        self.remove_fl_config = True
-        self.remove_updater_section = True
-        self.remove_printer_cfg_include = True
-
-    def toggle_remove_fluidd(self, **kwargs) -> None:
-        self.remove_fluidd = not self.remove_fluidd
-
-    def toggle_remove_fl_config(self, **kwargs) -> None:
-        self.remove_fl_config = not self.remove_fl_config
-
-    def toggle_remove_updater_section(self, **kwargs) -> None:
-        self.remove_updater_section = not self.remove_updater_section
-
-    def toggle_remove_printer_cfg_include(self, **kwargs) -> None:
-        self.remove_printer_cfg_include = not self.remove_printer_cfg_include
-
-    def run_removal_process(self, **kwargs) -> None:
-        if (
-            not self.remove_fluidd
-            and not self.remove_fl_config
-            and not self.remove_updater_section
-            and not self.remove_printer_cfg_include
-        ):
-            error = f"{COLOR_RED}Nothing selected! Select options to remove first.{RESET_FORMAT}"
-            print(error)
-            return
-
-        fluidd_remove.run_fluidd_removal(
-            remove_fluidd=self.remove_fluidd,
-            remove_fl_config=self.remove_fl_config,
-            remove_mr_updater_section=self.remove_updater_section,
-            remove_flc_printer_cfg_include=self.remove_printer_cfg_include,
-        )
-
-        self.remove_fluidd = False
-        self.remove_fl_config = False
-        self.remove_updater_section = False
-        self.remove_printer_cfg_include = False

kiauh/components/klipper/menus/klipper_remove_menu.py

@@ -28,7 +28,7 @@ class KlipperRemoveMenu(BaseMenu):
                 "2": self.toggle_remove_klipper_dir,
                 "3": self.toggle_remove_klipper_env,
                 "4": self.toggle_delete_klipper_logs,
-                "5": self.run_removal_process,
+                "c": self.run_removal_process,
             },
             footer_type=BACK_HELP_FOOTER,
         )
@@ -62,7 +62,7 @@ class KlipperRemoveMenu(BaseMenu):
             |  3) {o3} Remove Python Environment                     |
             |  4) {o4} Delete all Log-Files                          |
             |-------------------------------------------------------|
-            |  5) Continue                                          |
+            |  C) Continue                                          |
             """
         )[1:]
         print(menu, end="")

kiauh/components/mainsail/__init__.py

@@ -1,27 +0,0 @@
-#!/usr/bin/env python3
-
-# ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-from pathlib import Path
-
-from core.backup_manager import BACKUP_ROOT_DIR
-
-MODULE_PATH = Path(__file__).resolve().parent
-MAINSAIL_DIR = Path.home().joinpath("mainsail")
-MAINSAIL_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("mainsail-backups")
-MAINSAIL_CONFIG_DIR = Path.home().joinpath("mainsail-config")
-MAINSAIL_CONFIG_JSON = MAINSAIL_DIR.joinpath("config.json")
-MAINSAIL_URL = (
-    "https://github.com/mainsail-crew/mainsail/releases/latest/download/mainsail.zip"
-)
-MAINSAIL_UNSTABLE_URL = (
-    "https://github.com/mainsail-crew/mainsail/releases/download/%TAG%/mainsail.zip"
-)
-MAINSAIL_CONFIG_REPO_URL = "https://github.com/mainsail-crew/mainsail-config.git"

kiauh/components/mainsail/assets/mainsail-config-updater.conf

@@ -1,6 +0,0 @@
-[update_manager mainsail-config]
-type: git_repo
-primary_branch: master
-path: ~/mainsail-config
-origin: https://github.com/mainsail-crew/mainsail-config.git
-managed_services: klipper

kiauh/components/mainsail/assets/mainsail-updater.conf

@@ -1,5 +0,0 @@
-[update_manager mainsail]
-type: web
-channel: stable
-repo: mainsail-crew/mainsail
-path: ~/mainsail

kiauh/components/mainsail/mainsail_dialogs.py

@@ -1,95 +0,0 @@
-#!/usr/bin/env python3
-
-# ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-import textwrap
-
-from core.menus.base_menu import print_back_footer
-from utils.constants import RESET_FORMAT, COLOR_YELLOW, COLOR_CYAN
-
-
-def print_moonraker_not_found_dialog():
-    line1 = f"{COLOR_YELLOW}WARNING:{RESET_FORMAT}"
-    line2 = f"{COLOR_YELLOW}No local Moonraker installation was found!{RESET_FORMAT}"
-    dialog = textwrap.dedent(
-        f"""
-        /=======================================================\\
-        | {line1:<63}|
-        | {line2:<63}|
-        |-------------------------------------------------------|
-        | It is possible to install Mainsail without a local    |
-        | Moonraker installation. If you continue, you need to  |
-        | make sure, that Moonraker is installed on another     |
-        | machine in your network. Otherwise Mainsail will NOT  |
-        | work correctly.                                       |
-        """
-    )[1:]
-
-    print(dialog, end="")
-    print_back_footer()
-
-
-def print_mainsail_already_installed_dialog():
-    line1 = f"{COLOR_YELLOW}WARNING:{RESET_FORMAT}"
-    line2 = f"{COLOR_YELLOW}Mainsail seems to be already installed!{RESET_FORMAT}"
-    dialog = textwrap.dedent(
-        f"""
-        /=======================================================\\
-        | {line1:<63}|
-        | {line2:<63}|
-        |-------------------------------------------------------|
-        | If you continue, your current Mainsail installation   |
-        | will be overwritten. You will not loose any printer   |
-        | configurations and the Moonraker database will remain |
-        | untouched.                                            |
-        """
-    )[1:]
-
-    print(dialog, end="")
-    print_back_footer()
-
-
-def print_install_mainsail_config_dialog():
-    dialog = textwrap.dedent(
-        f"""
-        /=======================================================\\
-        | It is recommended to use special macros in order to   |
-        | have Mainsail fully functional and working.           |
-        |                                                       |
-        | The recommended macros for Mainsail can be seen here: |
-        | https://github.com/mainsail-crew/mainsail-config      |
-        |                                                       |
-        | If you already use these macros skip this step.       |
-        | Otherwise you should consider to answer with 'Y' to   |
-        | download the recommended macros.                      |
-        \\=======================================================/
-        """
-    )[1:]
-
-    print(dialog, end="")
-
-
-def print_mainsail_port_select_dialog(port: str):
-    port = f"{COLOR_CYAN}{port}{RESET_FORMAT}"
-    dialog = textwrap.dedent(
-        f"""
-        /=======================================================\\
-        | Please select the port, Mainsail should be served on. |
-        | If you are unsure what to select, hit Enter to apply  |
-        | the suggested value of: {port:38} |
-        |                                                       |
-        | In case you need Mainsail to be served on a specific  |
-        | port, you can set it now. Make sure the port is not   |
-        | used by any other application on your system!         |
-        \\=======================================================/
-        """
-    )[1:]
-
-    print(dialog, end="")

kiauh/components/mainsail/mainsail_remove.py

@@ -1,164 +0,0 @@
-#!/usr/bin/env python3
-
-# ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-
-import shutil
-import subprocess
-from pathlib import Path
-from typing import List
-
-from components.klipper.klipper import Klipper
-from components.mainsail import MAINSAIL_DIR, MAINSAIL_CONFIG_DIR
-from components.mainsail.mainsail_utils import backup_config_json
-from components.moonraker.moonraker import Moonraker
-from core.config_manager.config_manager import ConfigManager
-from core.instance_manager.instance_manager import InstanceManager
-from utils import NGINX_SITES_AVAILABLE, NGINX_SITES_ENABLED
-from utils.filesystem_utils import remove_file
-from utils.logger import Logger
-
-
-def run_mainsail_removal(
-    remove_mainsail: bool,
-    remove_ms_config: bool,
-    backup_ms_config_json: bool,
-    remove_mr_updater_section: bool,
-    remove_msc_printer_cfg_include: bool,
-) -> None:
-    if backup_ms_config_json:
-        backup_config_json()
-    if remove_mainsail:
-        remove_mainsail_dir()
-        remove_nginx_config()
-        remove_nginx_logs()
-        if remove_mr_updater_section:
-            remove_updater_section("update_manager mainsail")
-    if remove_ms_config:
-        remove_mainsail_cfg_dir()
-        remove_mainsail_cfg_symlink()
-        if remove_mr_updater_section:
-            remove_updater_section("update_manager mainsail-config")
-        if remove_msc_printer_cfg_include:
-            remove_printer_cfg_include()
-
-
-def remove_mainsail_dir() -> None:
-    Logger.print_status("Removing Mainsail ...")
-    if not MAINSAIL_DIR.exists():
-        Logger.print_info(f"'{MAINSAIL_DIR}' does not exist. Skipping ...")
-        return
-
-    try:
-        shutil.rmtree(MAINSAIL_DIR)
-    except OSError as e:
-        Logger.print_error(f"Unable to delete '{MAINSAIL_DIR}':\n{e}")
-
-
-def remove_nginx_config() -> None:
-    Logger.print_status("Removing Mainsails NGINX config ...")
-    try:
-        remove_file(NGINX_SITES_AVAILABLE.joinpath("mainsail"), True)
-        remove_file(NGINX_SITES_ENABLED.joinpath("mainsail"), True)
-
-    except subprocess.CalledProcessError as e:
-        log = f"Unable to remove Mainsail NGINX config:\n{e.stderr.decode()}"
-        Logger.print_error(log)
-
-
-def remove_nginx_logs() -> None:
-    Logger.print_status("Removing Mainsails NGINX logs ...")
-    try:
-        remove_file(Path("/var/log/nginx/mainsail-access.log"), True)
-        remove_file(Path("/var/log/nginx/mainsail-error.log"), True)
-
-        im = InstanceManager(Klipper)
-        instances: List[Klipper] = im.instances
-        if not instances:
-            return
-
-        for instance in instances:
-            remove_file(instance.log_dir.joinpath("mainsail-access.log"))
-            remove_file(instance.log_dir.joinpath("mainsail-error.log"))
-
-    except (OSError, subprocess.CalledProcessError) as e:
-        Logger.print_error(f"Unable to NGINX logs:\n{e}")
-
-
-def remove_updater_section(name: str) -> None:
-    Logger.print_status("Remove updater section from moonraker.conf ...")
-    im = InstanceManager(Moonraker)
-    instances: List[Moonraker] = im.instances
-    if not instances:
-        Logger.print_info("Moonraker not installed. Skipped ...")
-        return
-
-    for instance in instances:
-        Logger.print_status(f"Remove section '{name}' in '{instance.cfg_file}' ...")
-
-        if not instance.cfg_file.is_file():
-            Logger.print_info(f"'{instance.cfg_file}' does not exist. Skipped ...")
-            continue
-
-        cm = ConfigManager(instance.cfg_file)
-        if not cm.config.has_section(name):
-            Logger.print_info("Section not present. Skipped ...")
-            continue
-
-        cm.config.remove_section(name)
-        cm.write_config()
-
-
-def remove_mainsail_cfg_dir() -> None:
-    Logger.print_status("Removing mainsail-config ...")
-    if not MAINSAIL_CONFIG_DIR.exists():
-        Logger.print_info(f"'{MAINSAIL_CONFIG_DIR}' does not exist. Skipping ...")
-        return
-
-    try:
-        shutil.rmtree(MAINSAIL_CONFIG_DIR)
-    except OSError as e:
-        Logger.print_error(f"Unable to delete '{MAINSAIL_CONFIG_DIR}':\n{e}")
-
-
-def remove_mainsail_cfg_symlink() -> None:
-    Logger.print_status("Removing mainsail.cfg symlinks ...")
-    im = InstanceManager(Klipper)
-    instances: List[Klipper] = im.instances
-    for instance in instances:
-        Logger.print_status(f"Removing symlink from '{instance.cfg_file}' ...")
-        try:
-            remove_file(instance.cfg_dir.joinpath("mainsail.cfg"))
-        except subprocess.CalledProcessError:
-            Logger.print_error("Failed to remove symlink!")
-
-
-def remove_printer_cfg_include() -> None:
-    Logger.print_status("Remove mainsail-config include from printer.cfg ...")
-    im = InstanceManager(Klipper)
-    instances: List[Klipper] = im.instances
-    if not instances:
-        Logger.print_info("Klipper not installed. Skipping ...")
-        return
-
-    for instance in instances:
-        log = f"Removing include from '{instance.cfg_file}' ..."
-        Logger.print_status(log)
-
-        if not instance.cfg_file.is_file():
-            continue
-
-        cm = ConfigManager(instance.cfg_file)
-        if not cm.config.has_section("include mainsail.cfg"):
-            Logger.print_info("Section not present. Skipped ...")
-            continue
-
-        cm.config.remove_section("include mainsail.cfg")
-        cm.write_config()

kiauh/components/mainsail/mainsail_setup.py

@@ -1,256 +0,0 @@
-#!/usr/bin/env python3
-
-# ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-import subprocess
-from pathlib import Path
-from typing import List
-
-from kiauh import KIAUH_CFG
-from components.klipper.klipper import Klipper
-from components.mainsail import (
-    MAINSAIL_URL,
-    MAINSAIL_DIR,
-    MAINSAIL_CONFIG_DIR,
-    MAINSAIL_CONFIG_REPO_URL,
-    MODULE_PATH,
-)
-from components.mainsail.mainsail_dialogs import (
-    print_moonraker_not_found_dialog,
-    print_mainsail_already_installed_dialog,
-    print_install_mainsail_config_dialog,
-    print_mainsail_port_select_dialog,
-)
-from components.mainsail.mainsail_utils import (
-    restore_config_json,
-    enable_mainsail_remotemode,
-    backup_config_json,
-    symlink_webui_nginx_log,
-)
-from components.moonraker.moonraker import Moonraker
-from core.config_manager.config_manager import ConfigManager
-from core.instance_manager.instance_manager import InstanceManager
-from core.repo_manager.repo_manager import RepoManager
-from utils import NGINX_SITES_AVAILABLE, NGINX_SITES_ENABLED
-from utils.common import check_install_dependencies
-from utils.filesystem_utils import (
-    unzip,
-    copy_upstream_nginx_cfg,
-    copy_common_vars_nginx_cfg,
-    create_nginx_cfg,
-    create_symlink,
-    remove_file,
-)
-from utils.input_utils import get_confirm, get_number_input
-from utils.logger import Logger
-from utils.system_utils import (
-    download_file,
-    set_nginx_permissions,
-    get_ipv4_addr,
-    control_systemd_service,
-)
-
-
-def install_mainsail() -> None:
-    mr_im = InstanceManager(Moonraker)
-    mr_instances: List[Moonraker] = mr_im.instances
-
-    enable_remotemode = False
-    if not mr_instances:
-        print_moonraker_not_found_dialog()
-        if not get_confirm("Continue Mainsail installation?", allow_go_back=True):
-            return
-
-    # if moonraker is not installed or multiple instances
-    # are installed we enable mainsails remote mode
-    if not mr_instances or len(mr_instances) > 1:
-        enable_remotemode = True
-
-    do_reinstall = False
-    if Path.home().joinpath("mainsail").exists():
-        print_mainsail_already_installed_dialog()
-        do_reinstall = get_confirm("Re-install Mainsail?", allow_go_back=True)
-        if do_reinstall:
-            backup_config_json(is_temp=True)
-        else:
-            return
-
-    kl_im = InstanceManager(Klipper)
-    kl_instances = kl_im.instances
-    install_ms_config = False
-    if kl_instances:
-        print_install_mainsail_config_dialog()
-        question = "Download the recommended macros?"
-        install_ms_config = get_confirm(question, allow_go_back=False)
-
-    # if a default port is configured in the kiauh.cfg, we use that for the port
-    # otherwise we default to port 80, but show the user a dialog to confirm/change that port
-    cm = ConfigManager(cfg_file=KIAUH_CFG)
-    default_port = cm.get_value("mainsail", "default_port")
-    is_valid_port = default_port and default_port.isdigit()
-    mainsail_port = default_port if is_valid_port else "80"
-    if not is_valid_port:
-        print_mainsail_port_select_dialog(mainsail_port)
-        mainsail_port = get_number_input(
-            "Configure Mainsail for port",
-            min_count=mainsail_port,
-            default=mainsail_port,
-        )
-
-    check_install_dependencies(["nginx"])
-
-    try:
-        download_mainsail()
-        if do_reinstall:
-            restore_config_json()
-        if enable_remotemode:
-            enable_mainsail_remotemode()
-        if mr_instances:
-            patch_moonraker_conf(
-                mr_instances,
-                "Mainsail",
-                "update_manager mainsail",
-                "mainsail-updater.conf",
-            )
-            mr_im.restart_all_instance()
-        if install_ms_config and kl_instances:
-            download_mainsail_cfg()
-            create_mainsail_cfg_symlink(kl_instances)
-            patch_moonraker_conf(
-                mr_instances,
-                "mainsail-config",
-                "update_manager mainsail-config",
-                "mainsail-config-updater.conf",
-            )
-            patch_printer_config(kl_instances)
-            kl_im.restart_all_instance()
-
-        copy_upstream_nginx_cfg()
-        copy_common_vars_nginx_cfg()
-        create_mainsail_nginx_cfg(mainsail_port)
-        if kl_instances:
-            symlink_webui_nginx_log(kl_instances)
-        control_systemd_service("nginx", "restart")
-
-    except Exception as e:
-        Logger.print_error(f"Mainsail installation failed!\n{e}")
-        return
-
-    log = f"Open Mainsail now on: http://{get_ipv4_addr()}:{mainsail_port}"
-    Logger.print_ok("Mainsail installation complete!", start="\n")
-    Logger.print_ok(log, prefix=False, end="\n\n")
-
-
-def download_mainsail() -> None:
-    try:
-        Logger.print_status("Downloading Mainsail ...")
-        target = Path.home().joinpath("mainsail.zip")
-        download_file(MAINSAIL_URL, target, True)
-        Logger.print_ok("Download complete!")
-
-        Logger.print_status("Extracting mainsail.zip ...")
-        unzip(Path.home().joinpath("mainsail.zip"), MAINSAIL_DIR)
-        target.unlink(missing_ok=True)
-        Logger.print_ok("OK!")
-
-    except Exception:
-        Logger.print_error("Downloading Mainsail failed!")
-        raise
-
-
-def update_mainsail() -> None:
-    Logger.print_status("Updating Mainsail ...")
-    backup_config_json(is_temp=True)
-    download_mainsail()
-    restore_config_json()
-
-
-def download_mainsail_cfg() -> None:
-    try:
-        Logger.print_status("Downloading mainsail-config ...")
-        rm = RepoManager(MAINSAIL_CONFIG_REPO_URL, target_dir=MAINSAIL_CONFIG_DIR)
-        rm.clone_repo()
-    except Exception:
-        Logger.print_error("Downloading mainsail-config failed!")
-        raise
-
-
-def create_mainsail_cfg_symlink(klipper_instances: List[Klipper]) -> None:
-    Logger.print_status("Create symlink of mainsail.cfg ...")
-    source = Path(MAINSAIL_CONFIG_DIR, "mainsail.cfg")
-    for instance in klipper_instances:
-        target = instance.cfg_dir
-        Logger.print_status(f"Linking {source} to {target}")
-        try:
-            create_symlink(source, target)
-        except subprocess.CalledProcessError:
-            Logger.print_error("Creating symlink failed!")
-
-
-def create_mainsail_nginx_cfg(port: int) -> None:
-    root_dir = MAINSAIL_DIR
-    source = NGINX_SITES_AVAILABLE.joinpath("mainsail")
-    target = NGINX_SITES_ENABLED.joinpath("mainsail")
-    try:
-        Logger.print_status("Creating NGINX config for Mainsail ...")
-        remove_file(Path("/etc/nginx/sites-enabled/default"), True)
-        create_nginx_cfg("mainsail", port, root_dir)
-        create_symlink(source, target, True)
-        set_nginx_permissions()
-        Logger.print_ok("NGINX config for Mainsail successfully created.")
-    except Exception:
-        Logger.print_error("Creating NGINX config for Mainsail failed!")
-        raise
-
-
-def patch_moonraker_conf(
-    moonraker_instances: List[Moonraker],
-    name: str,
-    section_name: str,
-    template_file: str,
-) -> None:
-    for instance in moonraker_instances:
-        cfg_file = instance.cfg_file
-        Logger.print_status(f"Add {name} update section to '{cfg_file}' ...")
-
-        if not Path(cfg_file).exists():
-            Logger.print_warn(f"'{cfg_file}' not found!")
-            return
-
-        cm = ConfigManager(cfg_file)
-        if cm.config.has_section(section_name):
-            Logger.print_info("Section already exist. Skipped ...")
-            return
-
-        template = MODULE_PATH.joinpath("assets", template_file)
-        with open(template, "r") as t:
-            template_content = "\n"
-            template_content += t.read()
-
-        with open(cfg_file, "a") as f:
-            f.write(template_content)
-
-
-def patch_printer_config(klipper_instances: List[Klipper]) -> None:
-    for instance in klipper_instances:
-        cfg_file = instance.cfg_file
-        Logger.print_status(f"Including mainsail-config in '{cfg_file}' ...")
-
-        if not Path(cfg_file).exists():
-            Logger.print_warn(f"'{cfg_file}' not found!")
-            return
-
-        cm = ConfigManager(cfg_file)
-        if cm.config.has_section("include mainsail.cfg"):
-            Logger.print_info("Section already exist. Skipped ...")
-            return
-
-        with open(cfg_file, "a") as f:
-            f.write("\n[include mainsail.cfg]")

kiauh/components/mainsail/mainsail_utils.py

@@ -1,117 +0,0 @@
-#!/usr/bin/env python3
-
-# ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-import json
-import shutil
-from json import JSONDecodeError
-from pathlib import Path
-from typing import List
-
-import urllib.request
-
-from components.klipper.klipper import Klipper
-from components.mainsail import (
-    MAINSAIL_CONFIG_JSON,
-    MAINSAIL_DIR,
-    MAINSAIL_BACKUP_DIR,
-)
-from core.backup_manager.backup_manager import BackupManager
-from utils import NGINX_SITES_AVAILABLE, NGINX_CONFD
-from utils.common import get_install_status_webui
-from utils.logger import Logger
-
-
-def get_mainsail_status() -> str:
-    return get_install_status_webui(
-        MAINSAIL_DIR,
-        NGINX_SITES_AVAILABLE.joinpath("mainsail"),
-        NGINX_CONFD.joinpath("upstreams.conf"),
-        NGINX_CONFD.joinpath("common_vars.conf"),
-    )
-
-
-def backup_config_json(is_temp=False) -> None:
-    Logger.print_status(f"Backup '{MAINSAIL_CONFIG_JSON}' ...")
-    bm = BackupManager()
-    if is_temp:
-        fn = Path.home().joinpath("config.json.kiauh.bak")
-        bm.backup_file(MAINSAIL_CONFIG_JSON, custom_filename=fn)
-    else:
-        bm.backup_file(MAINSAIL_CONFIG_JSON)
-
-
-def restore_config_json() -> None:
-    try:
-        Logger.print_status(f"Restore '{MAINSAIL_CONFIG_JSON}' ...")
-        source = Path.home().joinpath("config.json.kiauh.bak")
-        shutil.copy(source, MAINSAIL_CONFIG_JSON)
-    except OSError:
-        Logger.print_info("Unable to restore config.json. Skipped ...")
-
-
-def enable_mainsail_remotemode() -> None:
-    Logger.print_status("Enable Mainsails remote mode ...")
-    with open(MAINSAIL_CONFIG_JSON, "r") as f:
-        config_data = json.load(f)
-
-    if config_data["instancesDB"] == "browser":
-        Logger.print_info("Remote mode already configured. Skipped ...")
-        return
-
-    Logger.print_status("Setting instance storage location to 'browser' ...")
-    config_data["instancesDB"] = "browser"
-
-    with open(MAINSAIL_CONFIG_JSON, "w") as f:
-        json.dump(config_data, f, indent=4)
-    Logger.print_ok("Mainsails remote mode enabled!")
-
-
-def symlink_webui_nginx_log(klipper_instances: List[Klipper]) -> None:
-    Logger.print_status("Link NGINX logs into log directory ...")
-    access_log = Path("/var/log/nginx/mainsail-access.log")
-    error_log = Path("/var/log/nginx/mainsail-error.log")
-
-    for instance in klipper_instances:
-        desti_access = instance.log_dir.joinpath("mainsail-access.log")
-        if not desti_access.exists():
-            desti_access.symlink_to(access_log)
-
-        desti_error = instance.log_dir.joinpath("mainsail-error.log")
-        if not desti_error.exists():
-            desti_error.symlink_to(error_log)
-
-
-def get_mainsail_local_version() -> str:
-    relinfo_file = MAINSAIL_DIR.joinpath("release_info.json")
-    if not relinfo_file.is_file():
-        return "-"
-
-    with open(relinfo_file, "r") as f:
-        return json.load(f)["version"]
-
-
-def get_mainsail_remote_version() -> str:
-    url = "https://api.github.com/repos/mainsail-crew/mainsail/tags"
-    try:
-        with urllib.request.urlopen(url) as response:
-            data = json.loads(response.read())
-        return data[0]["name"]
-    except (JSONDecodeError, TypeError):
-        return "ERROR"
-
-
-def backup_mainsail_data() -> None:
-    with open(MAINSAIL_DIR.joinpath(".version"), "r") as v:
-        version = v.readlines()[0]
-    bm = BackupManager()
-    bm.backup_directory(f"mainsail-{version}", MAINSAIL_DIR, MAINSAIL_BACKUP_DIR)
-    bm.backup_file(MAINSAIL_CONFIG_JSON, MAINSAIL_BACKUP_DIR)
-    bm.backup_file(NGINX_SITES_AVAILABLE.joinpath("mainsail"), MAINSAIL_BACKUP_DIR)

kiauh/components/mainsail/menus/mainsail_remove_menu.py

@@ -1,122 +0,0 @@
-#!/usr/bin/env python3
-
-# ======================================================================= #
-#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
-#                                                                         #
-#  This file is part of KIAUH - Klipper Installation And Update Helper    #
-#  https://github.com/dw-0/kiauh                                          #
-#                                                                         #
-#  This file may be distributed under the terms of the GNU GPLv3 license  #
-# ======================================================================= #
-
-import textwrap
-
-from components.mainsail import mainsail_remove
-from core.menus import BACK_HELP_FOOTER
-from core.menus.base_menu import BaseMenu
-from utils.constants import RESET_FORMAT, COLOR_RED, COLOR_CYAN
-
-
-# noinspection PyUnusedLocal
-class MainsailRemoveMenu(BaseMenu):
-    def __init__(self):
-        super().__init__(
-            header=False,
-            options={
-                "0": self.toggle_all,
-                "1": self.toggle_remove_mainsail,
-                "2": self.toggle_remove_ms_config,
-                "3": self.toggle_backup_config_json,
-                "4": self.toggle_remove_updater_section,
-                "5": self.toggle_remove_printer_cfg_include,
-                "6": self.run_removal_process,
-            },
-            footer_type=BACK_HELP_FOOTER,
-        )
-        self.remove_mainsail = False
-        self.remove_ms_config = False
-        self.backup_config_json = False
-        self.remove_updater_section = False
-        self.remove_printer_cfg_include = False
-
-    def print_menu(self) -> None:
-        header = " [ Remove Mainsail ] "
-        color = COLOR_RED
-        count = 62 - len(color) - len(RESET_FORMAT)
-        checked = f"[{COLOR_CYAN}x{RESET_FORMAT}]"
-        unchecked = "[ ]"
-        o1 = checked if self.remove_mainsail else unchecked
-        o2 = checked if self.remove_ms_config else unchecked
-        o3 = checked if self.backup_config_json else unchecked
-        o4 = checked if self.remove_updater_section else unchecked
-        o5 = checked if self.remove_printer_cfg_include else unchecked
-        menu = textwrap.dedent(
-            f"""
-            /=======================================================\\
-            | {color}{header:~^{count}}{RESET_FORMAT} |
-            |-------------------------------------------------------|
-            | Enter a number and hit enter to select / deselect     |
-            | the specific option for removal.                      |
-            |-------------------------------------------------------|
-            |  0) Select everything                                 |
-            |-------------------------------------------------------|
-            |  1) {o1} Remove Mainsail                               |
-            |  2) {o2} Remove mainsail-config                        |
-            |  3) {o3} Backup config.json                            |
-            |                                                       |
-            |  printer.cfg & moonraker.conf                         |
-            |  4) {o4} Remove Moonraker update section               |
-            |  5) {o5} Remove printer.cfg include                    |
-            |-------------------------------------------------------|
-            |  6) Continue                                          |
-            """
-        )[1:]
-        print(menu, end="")
-
-    def toggle_all(self, **kwargs) -> None:
-        self.remove_mainsail = True
-        self.remove_ms_config = True
-        self.backup_config_json = True
-        self.remove_updater_section = True
-        self.remove_printer_cfg_include = True
-
-    def toggle_remove_mainsail(self, **kwargs) -> None:
-        self.remove_mainsail = not self.remove_mainsail
-
-    def toggle_remove_ms_config(self, **kwargs) -> None:
-        self.remove_ms_config = not self.remove_ms_config
-
-    def toggle_backup_config_json(self, **kwargs) -> None:
-        self.backup_config_json = not self.backup_config_json
-
-    def toggle_remove_updater_section(self, **kwargs) -> None:
-        self.remove_updater_section = not self.remove_updater_section
-
-    def toggle_remove_printer_cfg_include(self, **kwargs) -> None:
-        self.remove_printer_cfg_include = not self.remove_printer_cfg_include
-
-    def run_removal_process(self, **kwargs) -> None:
-        if (
-            not self.remove_mainsail
-            and not self.remove_ms_config
-            and not self.backup_config_json
-            and not self.remove_updater_section
-            and not self.remove_printer_cfg_include
-        ):
-            error = f"{COLOR_RED}Nothing selected! Select options to remove first.{RESET_FORMAT}"
-            print(error)
-            return
-
-        mainsail_remove.run_mainsail_removal(
-            remove_mainsail=self.remove_mainsail,
-            remove_ms_config=self.remove_ms_config,
-            backup_ms_config_json=self.backup_config_json,
-            remove_mr_updater_section=self.remove_updater_section,
-            remove_msc_printer_cfg_include=self.remove_printer_cfg_include,
-        )
-
-        self.remove_mainsail = False
-        self.remove_ms_config = False
-        self.backup_config_json = False
-        self.remove_updater_section = False
-        self.remove_printer_cfg_include = False

kiauh/components/moonraker/menus/moonraker_remove_menu.py

@@ -29,7 +29,7 @@ class MoonrakerRemoveMenu(BaseMenu):
                 "3": self.toggle_remove_moonraker_env,
                 "4": self.toggle_remove_moonraker_polkit,
                 "5": self.toggle_delete_moonraker_logs,
-                "6": self.run_removal_process,
+                "c": self.run_removal_process,
             },
             footer_type=BACK_HELP_FOOTER,
         )
@@ -66,7 +66,7 @@ class MoonrakerRemoveMenu(BaseMenu):
             |  4) {o4} Remove Policy Kit Rules                       |
             |  5) {o5} Delete all Log-Files                          |
             |-------------------------------------------------------|
-            |  6) Continue                                          |
+            |  C) Continue                                          |
             """
         )[1:]
         print(menu, end="")

kiauh/components/moonraker/moonraker_setup.py

@@ -14,11 +14,11 @@ import sys
 from pathlib import Path
 from typing import List
 
+from components.webui_client import MAINSAIL_DIR
+from components.webui_client.client_utils import enable_mainsail_remotemode
 from kiauh import KIAUH_CFG
 from components.klipper.klipper import Klipper
 from components.klipper.klipper_dialogs import print_instance_overview
-from components.mainsail import MAINSAIL_DIR
-from components.mainsail.mainsail_utils import enable_mainsail_remotemode
 from components.moonraker import (
     EXIT_MOONRAKER_SETUP,
     DEFAULT_MOONRAKER_REPO_URL,

kiauh/components/moonraker/moonraker_utils.py

@@ -12,8 +12,6 @@
 import shutil
 from typing import Dict, Literal, List, Union
 
-from components.mainsail import MAINSAIL_DIR
-from components.mainsail.mainsail_utils import enable_mainsail_remotemode
 from components.moonraker import (
     DEFAULT_MOONRAKER_PORT,
     MODULE_PATH,
@@ -23,6 +21,8 @@ from components.moonraker import (
     MOONRAKER_DB_BACKUP_DIR,
 )
 from components.moonraker.moonraker import Moonraker
+from components.webui_client import MAINSAIL_DIR
+from components.webui_client.client_utils import enable_mainsail_remotemode
 from core.backup_manager.backup_manager import BackupManager
 from core.config_manager.config_manager import ConfigManager
 from core.instance_manager.instance_manager import InstanceManager

kiauh/components/webui_client/__init__.py

@@ -0,0 +1,77 @@
+#!/usr/bin/env python3
+
+# ======================================================================= #
+#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from pathlib import Path
+from typing import Literal, TypedDict, Set
+
+from core.backup_manager import BACKUP_ROOT_DIR
+
+MODULE_PATH = Path(__file__).resolve().parent
+
+###########
+# MAINSAIL
+###########
+MAINSAIL_DIR = Path.home().joinpath("mainsail")
+MAINSAIL_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("mainsail-backups")
+MAINSAIL_CONFIG_DIR = Path.home().joinpath("mainsail-config")
+MAINSAIL_CONFIG_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("mainsail-config-backups")
+MAINSAIL_CONFIG_REPO_URL = "https://github.com/mainsail-crew/mainsail-config.git"
+MAINSAIL_CONFIG_JSON = MAINSAIL_DIR.joinpath("config.json")
+MAINSAIL_URL = (
+    "https://github.com/mainsail-crew/mainsail/releases/latest/download/mainsail.zip"
+)
+MAINSAIL_PRE_RLS_URL = (
+    "https://github.com/mainsail-crew/mainsail/releases/download/%TAG%/mainsail.zip"
+)
+MAINSAIL_TAGS_URL = "https://api.github.com/repos/mainsail-crew/mainsail/tags"
+
+#########
+# FLUIDD
+#########
+FLUIDD_DIR = Path.home().joinpath("fluidd")
+FLUIDD_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("fluidd-backups")
+FLUIDD_CONFIG_DIR = Path.home().joinpath("fluidd-config")
+FLUIDD_CONFIG_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("fluidd-config-backups")
+FLUIDD_CONFIG_REPO_URL = "https://github.com/fluidd-core/fluidd-config.git"
+FLUIDD_URL = "https://github.com/fluidd-core/fluidd/releases/latest/download/fluidd.zip"
+FLUIDD_PRE_RLS_URL = (
+    "https://github.com/fluidd-core/fluidd/releases/download/%TAG%/fluidd.zip"
+)
+FLUIDD_TAGS_URL = "https://api.github.com/repos/fluidd-core/fluidd/tags"
+
+ClientName = Literal["mainsail", "fluidd"]
+ClientConfigName = Literal["mainsail-config", "fluidd-config"]
+
+
+class ClientData(TypedDict):
+    name: ClientName
+    display_name: str
+    dir: Path
+    backup_dir: Path
+    url: str
+    pre_release_url: str
+    tags_url: str
+    remote_mode: bool  # required only for Mainsail
+    mr_conf_repo: str
+    mr_conf_path: str
+    client_config: "ClientConfigData"
+
+
+class ClientConfigData(TypedDict):
+    name: ClientConfigName
+    display_name: str
+    cfg_filename: str
+    dir: Path
+    backup_dir: Path
+    url: str
+    printer_cfg_section: str
+    mr_conf_path: str
+    mr_conf_origin: str

kiauh/components/webui_client/client_config/client_config_remove.py

@@ -0,0 +1,64 @@
+#!/usr/bin/env python3
+
+# ======================================================================= #
+#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+
+import shutil
+import subprocess
+from typing import List
+
+from components.klipper.klipper import Klipper
+from components.moonraker.moonraker import Moonraker
+from components.webui_client import ClientConfigData
+from core.instance_manager.instance_manager import InstanceManager
+from utils.filesystem_utils import remove_file, remove_config_section
+from utils.logger import Logger
+
+
+def run_client_config_removal(
+    client_config: ClientConfigData,
+    remove_moonraker_conf_section: bool,
+    remove_printer_cfg_include: bool,
+    kl_instances: List[Klipper],
+    mr_instances: List[Moonraker],
+) -> None:
+    remove_client_config_dir(client_config)
+    remove_client_config_symlink(client_config)
+    if remove_moonraker_conf_section:
+        remove_config_section(
+            f"update_manager {client_config.get('name')}", mr_instances
+        )
+    if remove_printer_cfg_include:
+        remove_config_section(client_config.get("printer_cfg_section"), kl_instances)
+
+
+def remove_client_config_dir(client_config: ClientConfigData) -> None:
+    Logger.print_status(f"Removing {client_config.get('name')} ...")
+    client_config_dir = client_config.get("dir")
+    if not client_config_dir.exists():
+        Logger.print_info(f"'{client_config_dir}' does not exist. Skipping ...")
+        return
+
+    try:
+        shutil.rmtree(client_config_dir)
+    except OSError as e:
+        Logger.print_error(f"Unable to delete '{client_config_dir}':\n{e}")
+
+
+def remove_client_config_symlink(client_config: ClientConfigData) -> None:
+    Logger.print_status(f"Removing {client_config.get('cfg_filename')} symlinks ...")
+    im = InstanceManager(Klipper)
+    instances: List[Klipper] = im.instances
+    for instance in instances:
+        Logger.print_status(f"Removing symlink from '{instance.cfg_file}' ...")
+        try:
+            remove_file(instance.cfg_dir.joinpath(client_config.get("cfg_filename")))
+        except subprocess.CalledProcessError:
+            Logger.print_error("Failed to remove symlink!")

kiauh/components/webui_client/client_config/client_config_setup.py

@@ -0,0 +1,145 @@
+#!/usr/bin/env python3
+
+# ======================================================================= #
+#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+import shutil
+import subprocess
+from pathlib import Path
+from typing import List, get_args
+
+from kiauh import KIAUH_CFG
+from components.klipper.klipper import Klipper
+from components.moonraker.moonraker import Moonraker
+from components.webui_client import ClientConfigData, ClientName, ClientData
+from components.webui_client.client_dialogs import print_client_already_installed_dialog
+from components.webui_client.client_utils import (
+    load_client_data,
+    backup_client_config_data,
+)
+from core.config_manager.config_manager import ConfigManager
+
+from core.instance_manager.instance_manager import InstanceManager
+from core.repo_manager.repo_manager import RepoManager
+from utils.filesystem_utils import (
+    create_symlink,
+    add_config_section,
+)
+from utils.input_utils import get_confirm
+from utils.logger import Logger
+
+
+def install_client_config(client_name: ClientName) -> None:
+    client: ClientData = load_client_data(client_name)
+    client_config: ClientConfigData = client.get("client_config")
+    d_name = client_config.get("display_name")
+
+    if check_existing_client_config_install(client_name):
+        Logger.print_info("Another Client-Config is already installed! Skipped ...")
+        return
+
+    if client_config.get("dir").exists():
+        print_client_already_installed_dialog(d_name)
+        if get_confirm(f"Re-install {d_name}?", allow_go_back=True):
+            shutil.rmtree(client_config.get("dir"))
+        else:
+            return
+
+    mr_im = InstanceManager(Moonraker)
+    mr_instances: List[Moonraker] = mr_im.instances
+    kl_im = InstanceManager(Klipper)
+    kl_instances = kl_im.instances
+
+    try:
+        download_client_config(client_config)
+        create_client_config_symlink(client_config, kl_instances)
+        add_config_section(
+            section=f"update_manager {client_config.get('name')}",
+            instances=mr_instances,
+            options=[
+                ("type", "git_repo"),
+                ("primary_branch", "master"),
+                ("path", client_config.get("mr_conf_path")),
+                ("origin", client_config.get("mr_conf_origin")),
+                ("managed_services", "klipper"),
+            ],
+        )
+        add_config_section(client_config.get("printer_cfg_section"), kl_instances)
+        kl_im.restart_all_instance()
+
+    except Exception as e:
+        Logger.print_error(f"{d_name} installation failed!\n{e}")
+        return
+
+    Logger.print_ok(f"{d_name} installation complete!", start="\n")
+
+
+def check_existing_client_config_install(client_name: ClientName) -> bool:
+    # check if any other client-configs are present
+    # as they can conflict each other, or are at least
+    # redundant to have, so we skip the installation
+    client_list = list(get_args(ClientName))
+    client_list.remove(client_name)
+    for c in client_list:
+        c_data: ClientData = load_client_data(c)
+        c_config_data: ClientConfigData = c_data.get("client_config")
+        if c_config_data.get("dir").exists():
+            return True
+
+    return False
+
+
+def download_client_config(client_config: ClientConfigData) -> None:
+    try:
+        Logger.print_status(f"Downloading {client_config.get('display_name')} ...")
+        rm = RepoManager(
+            client_config.get("url"), target_dir=str(client_config.get("dir"))
+        )
+        rm.clone_repo()
+    except Exception:
+        Logger.print_error(f"Downloading {client_config.get('display_name')} failed!")
+        raise
+
+
+def update_client_config(client: ClientData) -> None:
+    client_config: ClientConfigData = client.get("client_config")
+
+    Logger.print_status(f"Updating {client_config.get('display_name')} ...")
+
+    cm = ConfigManager(cfg_file=KIAUH_CFG)
+    if cm.get_value("kiauh", "backup_before_update"):
+        backup_client_config_data(client)
+
+    repo_manager = RepoManager(
+        repo=client_config.get("url"),
+        branch="master",
+        target_dir=str(client_config.get("dir")),
+    )
+    repo_manager.pull_repo()
+
+    Logger.print_ok(f"Successfully updated {client_config.get('display_name')}.")
+    Logger.print_warn("Remember to restart Klipper to reload the configurations!")
+
+
+def create_client_config_symlink(
+    client_config: ClientConfigData, klipper_instances: List[Klipper] = None
+) -> None:
+    if klipper_instances is None:
+        kl_im = InstanceManager(Klipper)
+        klipper_instances = kl_im.instances
+
+    Logger.print_status(f"Create symlink for {client_config.get('cfg_filename')} ...")
+    source = Path(client_config.get("dir"), client_config.get("cfg_filename"))
+    for instance in klipper_instances:
+        target = instance.cfg_dir
+        Logger.print_status(f"Linking {source} to {target}")
+        try:
+            create_symlink(source, target)
+        except subprocess.CalledProcessError:
+            Logger.print_error("Creating symlink failed!")

kiauh/components/webui_client/client_dialogs.py

@@ -12,6 +12,7 @@
 import textwrap
 from typing import List
 
+from components.webui_client import ClientData
 from core.menus.base_menu import print_back_footer
 from utils.constants import RESET_FORMAT, COLOR_YELLOW, COLOR_CYAN
 
@@ -25,10 +26,10 @@ def print_moonraker_not_found_dialog():
         | {line1:<63}|
         | {line2:<63}|
         |-------------------------------------------------------|
-        | It is possible to install Fluidd without a local      |
+        | It is possible to install Mainsail without a local    |
         | Moonraker installation. If you continue, you need to  |
         | make sure, that Moonraker is installed on another     |
-        | machine in your network. Otherwise Fluidd will NOT    |
+        | machine in your network. Otherwise Mainsail will NOT  |
         | work correctly.                                       |
         """
     )[1:]
@@ -37,19 +38,18 @@ def print_moonraker_not_found_dialog():
     print_back_footer()
 
 
-def print_fluidd_already_installed_dialog():
+def print_client_already_installed_dialog(name: str):
     line1 = f"{COLOR_YELLOW}WARNING:{RESET_FORMAT}"
-    line2 = f"{COLOR_YELLOW}Fluidd seems to be already installed!{RESET_FORMAT}"
+    line2 = f"{COLOR_YELLOW}{name} seems to be already installed!{RESET_FORMAT}"
+    line3 = f"If you continue, your current {name}"
     dialog = textwrap.dedent(
         f"""
         /=======================================================\\
         | {line1:<63}|
         | {line2:<63}|
         |-------------------------------------------------------|
-        | If you continue, your current Fluidd installation     |
-        | will be overwritten. You will not loose any printer   |
-        | configurations and the Moonraker database will remain |
-        | untouched.                                            |
+        | {line3:<54}|
+        | installation will be overwritten.                     |
         """
     )[1:]
 
@@ -57,38 +57,21 @@ def print_fluidd_already_installed_dialog():
     print_back_footer()
 
 
-def print_install_fluidd_config_dialog():
-    dialog = textwrap.dedent(
-        f"""
-        /=======================================================\\
-        | It is recommended to use special macros in order to   |
-        | have Fluidd fully functional and working.             |
-        |                                                       |
-        | The recommended macros for Fluidd can be seen here:   |
-        | https://github.com/fluidd-core/fluidd-config          |
-        |                                                       |
-        | If you already use these macros skip this step.       |
-        | Otherwise you should consider to answer with 'Y' to   |
-        | download the recommended macros.                      |
-        \\=======================================================/
-        """
-    )[1:]
-
-    print(dialog, end="")
-
-
-def print_fluidd_port_select_dialog(port: str, ports_in_use: List[str]):
+def print_client_port_select_dialog(name: str, port: str, ports_in_use: List[str]):
     port = f"{COLOR_CYAN}{port}{RESET_FORMAT}"
+    line1 = f"Please select the port, {name} should be served on."
+    line2 = f"In case you need {name} to be served on a specific"
     dialog = textwrap.dedent(
         f"""
         /=======================================================\\
-        | Please select the port, Fluidd should be served on.   |
+        | {line1:<54}|
         | If you are unsure what to select, hit Enter to apply  |
         | the suggested value of: {port:38} |
         |                                                       |
-        | In case you need Fluidd to be served on a specific    |
+        | {line2:<54}|
         | port, you can set it now. Make sure the port is not   |
         | used by any other application on your system!         |
+        \\=======================================================/
         """
     )[1:]
 
@@ -102,3 +85,27 @@ def print_fluidd_port_select_dialog(port: str, ports_in_use: List[str]):
     dialog += "\\=======================================================/\n"
 
     print(dialog, end="")
+
+
+def print_install_client_config_dialog(client: ClientData):
+    name = client.get("display_name")
+    url = client.get("client_config").get("url").replace(".git", "")
+    line1 = f"have {name} fully functional and working."
+    line2 = f"The recommended macros for {name} can be seen here:"
+    dialog = textwrap.dedent(
+        f"""
+        /=======================================================\\
+        | It is recommended to use special macros in order to   |
+        | {line1:<54}|
+        |                                                       |
+        | {line2:<54}|
+        | {url:<54}|
+        |                                                       |
+        | If you already use these macros skip this step.       |
+        | Otherwise you should consider to answer with 'Y' to   |
+        | download the recommended macros.                      |
+        \\=======================================================/
+        """
+    )[1:]
+
+    print(dialog, end="")

kiauh/components/webui_client/client_remove.py

@@ -0,0 +1,75 @@
+#!/usr/bin/env python3
+
+# ======================================================================= #
+#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+
+import shutil
+from typing import List
+
+from components.klipper.klipper import Klipper
+from components.moonraker.moonraker import Moonraker
+from components.webui_client import ClientData
+from components.webui_client.client_config.client_config_remove import (
+    run_client_config_removal,
+)
+from components.webui_client.client_utils import backup_mainsail_config_json
+
+from core.instance_manager.instance_manager import InstanceManager
+from utils.filesystem_utils import (
+    remove_nginx_config,
+    remove_nginx_logs,
+    remove_config_section,
+)
+from utils.logger import Logger
+
+
+def run_client_removal(
+    client: ClientData,
+    rm_client: bool,
+    rm_client_config: bool,
+    backup_ms_config_json: bool,
+    rm_moonraker_conf_section: bool,
+    rm_printer_cfg_section: bool,
+) -> None:
+    mr_im = InstanceManager(Moonraker)
+    mr_instances: List[Moonraker] = mr_im.instances
+    kl_im = InstanceManager(Klipper)
+    kl_instances: List[Klipper] = kl_im.instances
+    if backup_ms_config_json and client.get("name") == "mainsail":
+        backup_mainsail_config_json()
+    if rm_client:
+        client_name = client.get("name")
+        remove_client_dir(client)
+        remove_nginx_config(client_name)
+        remove_nginx_logs(client_name)
+        if rm_moonraker_conf_section:
+            section = f"update_manager {client_name}"
+            remove_config_section(section, mr_instances)
+    if rm_client_config:
+        run_client_config_removal(
+            client.get("client_config"),
+            rm_moonraker_conf_section,
+            rm_printer_cfg_section,
+            kl_instances,
+            mr_instances,
+        )
+
+
+def remove_client_dir(client: ClientData) -> None:
+    Logger.print_status(f"Removing {client.get('display_name')} ...")
+    client_dir = client.get("dir")
+    if not client.get("dir").exists():
+        Logger.print_info(f"'{client_dir}' does not exist. Skipping ...")
+        return
+
+    try:
+        shutil.rmtree(client_dir)
+    except OSError as e:
+        Logger.print_error(f"Unable to delete '{client_dir}':\n{e}")

kiauh/components/webui_client/client_setup.py

@@ -0,0 +1,207 @@
+#!/usr/bin/env python3
+
+# ======================================================================= #
+#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from pathlib import Path
+from typing import List
+
+from components.klipper.klipper import Klipper
+from components.webui_client import (
+    ClientName,
+    ClientData,
+)
+
+from components.moonraker.moonraker import Moonraker
+from components.webui_client.client_config.client_config_setup import (
+    install_client_config,
+    check_existing_client_config_install,
+)
+from components.webui_client.client_dialogs import (
+    print_moonraker_not_found_dialog,
+    print_client_port_select_dialog,
+    print_install_client_config_dialog,
+)
+from components.webui_client.client_utils import (
+    backup_mainsail_config_json,
+    restore_mainsail_config_json,
+    enable_mainsail_remotemode,
+    symlink_webui_nginx_log,
+    load_client_data,
+)
+from core.config_manager.config_manager import ConfigManager
+from core.instance_manager.instance_manager import InstanceManager
+from kiauh import KIAUH_CFG
+from utils import NGINX_SITES_AVAILABLE, NGINX_SITES_ENABLED
+from utils.common import check_install_dependencies
+from utils.filesystem_utils import (
+    unzip,
+    copy_upstream_nginx_cfg,
+    copy_common_vars_nginx_cfg,
+    create_nginx_cfg,
+    create_symlink,
+    remove_file,
+    add_config_section,
+    read_ports_from_nginx_configs,
+    is_valid_port,
+    get_next_free_port,
+)
+from utils.input_utils import get_confirm, get_number_input
+from utils.logger import Logger
+from utils.system_utils import (
+    download_file,
+    set_nginx_permissions,
+    get_ipv4_addr,
+    control_systemd_service,
+)
+
+
+def install_client(client_name: ClientName) -> None:
+    client: ClientData = load_client_data(client_name)
+    d_name = client.get("display_name")
+
+    if client is None:
+        Logger.print_error("Missing parameter client_name!")
+        return
+
+    if client.get("dir").exists():
+        Logger.print_info(
+            f"{client.get('display_name')} seems to be already installed! Skipped ..."
+        )
+        return
+
+    mr_im = InstanceManager(Moonraker)
+    mr_instances: List[Moonraker] = mr_im.instances
+
+    enable_remotemode = False
+    if not mr_instances:
+        print_moonraker_not_found_dialog()
+        if not get_confirm(
+            f"Continue {d_name} installation?",
+            allow_go_back=True,
+        ):
+            return
+
+    # if moonraker is not installed or multiple instances
+    # are installed we enable mainsails remote mode
+    if client.get("remote_mode") and not mr_instances or len(mr_instances) > 1:
+        enable_remotemode = True
+
+    kl_im = InstanceManager(Klipper)
+    kl_instances = kl_im.instances
+    install_client_cfg = False
+    client_config = client.get("client_config")
+    if (
+        kl_instances
+        and not client_config.get("dir").exists()
+        and not check_existing_client_config_install(client.get("name"))
+    ):
+        print_install_client_config_dialog(client)
+        question = f"Download the recommended {client_config.get('display_name')}?"
+        install_client_cfg = get_confirm(question, allow_go_back=False)
+
+    cm = ConfigManager(cfg_file=KIAUH_CFG)
+    client_port = cm.get_value(client.get("name"), "port")
+    ports_in_use = read_ports_from_nginx_configs()
+
+    # check if configured port is a valid number and not in use already
+    valid_port = is_valid_port(client_port, ports_in_use)
+    while not valid_port:
+        next_port = get_next_free_port(ports_in_use)
+        print_client_port_select_dialog(d_name, next_port, ports_in_use)
+        client_port = str(
+            get_number_input(
+                f"Configure {d_name} for port",
+                min_count=int(next_port),
+                default=next_port,
+            )
+        )
+        valid_port = is_valid_port(client_port, ports_in_use)
+
+    check_install_dependencies(["nginx"])
+
+    try:
+        download_client(client)
+        if enable_remotemode and client.get("name") == "mainsail":
+            enable_mainsail_remotemode()
+        if mr_instances:
+            add_config_section(
+                section=f"update_manager {client.get('name')}",
+                instances=mr_instances,
+                options=[
+                    ("type", "web"),
+                    ("channel", "stable"),
+                    ("repo", client.get("mr_conf_repo")),
+                    ("path", client.get("mr_conf_path")),
+                ],
+            )
+            mr_im.restart_all_instance()
+        if install_client_cfg and kl_instances:
+            install_client_config(client.get("name"))
+
+        copy_upstream_nginx_cfg()
+        copy_common_vars_nginx_cfg()
+        create_client_nginx_cfg(client, client_port)
+        if kl_instances:
+            symlink_webui_nginx_log(kl_instances)
+        control_systemd_service("nginx", "restart")
+
+    except Exception as e:
+        Logger.print_error(f"{d_name} installation failed!\n{e}")
+        return
+
+    log = f"Open {d_name} now on: http://{get_ipv4_addr()}:{client_port}"
+    Logger.print_ok(f"{d_name} installation complete!", start="\n")
+    Logger.print_ok(log, prefix=False, end="\n\n")
+
+
+def download_client(client: ClientData) -> None:
+    zipfile = f"{client.get('name').lower()}.zip"
+    target = Path().home().joinpath(zipfile)
+    try:
+        Logger.print_status(f"Downloading {zipfile} ...")
+        download_file(client.get("url"), target, True)
+        Logger.print_ok("Download complete!")
+
+        Logger.print_status(f"Extracting {zipfile} ...")
+        unzip(target, client.get("dir"))
+        target.unlink(missing_ok=True)
+        Logger.print_ok("OK!")
+
+    except Exception:
+        Logger.print_error(f"Downloading {zipfile} failed!")
+        raise
+
+
+def update_client(client: ClientData) -> None:
+    Logger.print_status(f"Updating {client.get('display_name')} ...")
+    if client.get("name") == "mainsail":
+        backup_mainsail_config_json(is_temp=True)
+
+    download_client(client)
+
+    if client.get("name") == "mainsail":
+        restore_mainsail_config_json()
+
+
+def create_client_nginx_cfg(client: ClientData, port: int) -> None:
+    d_name = client.get("display_name")
+    root_dir = client.get("dir")
+    source = NGINX_SITES_AVAILABLE.joinpath(client.get("name"))
+    target = NGINX_SITES_ENABLED.joinpath(client.get("name"))
+    try:
+        Logger.print_status(f"Creating NGINX config for {d_name} ...")
+        remove_file(Path("/etc/nginx/sites-enabled/default"), True)
+        create_nginx_cfg(client.get("name"), port, root_dir)
+        create_symlink(source, target, True)
+        set_nginx_permissions()
+        Logger.print_ok(f"NGINX config for {d_name} successfully created.")
+    except Exception:
+        Logger.print_error(f"Creating NGINX config for {d_name} failed!")
+        raise

kiauh/components/webui_client/client_utils.py

@@ -0,0 +1,237 @@
+#!/usr/bin/env python3
+
+# ======================================================================= #
+#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+import json
+import shutil
+from json import JSONDecodeError
+from pathlib import Path
+from typing import List, Optional, Dict, Literal, Union
+
+import urllib.request
+
+from components.klipper.klipper import Klipper
+from components.webui_client import (
+    MAINSAIL_CONFIG_JSON,
+    MAINSAIL_DIR,
+    MAINSAIL_BACKUP_DIR,
+    FLUIDD_PRE_RLS_URL,
+    FLUIDD_BACKUP_DIR,
+    FLUIDD_URL,
+    FLUIDD_DIR,
+    ClientData,
+    FLUIDD_CONFIG_REPO_URL,
+    FLUIDD_CONFIG_DIR,
+    ClientConfigData,
+    MAINSAIL_PRE_RLS_URL,
+    MAINSAIL_URL,
+    MAINSAIL_CONFIG_REPO_URL,
+    MAINSAIL_CONFIG_DIR,
+    ClientName,
+    MAINSAIL_TAGS_URL,
+    FLUIDD_TAGS_URL,
+    FLUIDD_CONFIG_BACKUP_DIR,
+    MAINSAIL_CONFIG_BACKUP_DIR,
+)
+from core.backup_manager.backup_manager import BackupManager
+from core.repo_manager.repo_manager import RepoManager
+from utils import NGINX_SITES_AVAILABLE, NGINX_CONFD
+from utils.common import get_install_status_webui, get_install_status_common
+from utils.constants import COLOR_CYAN, RESET_FORMAT, COLOR_YELLOW
+from utils.logger import Logger
+
+
+def load_client_data(client_name: ClientName) -> Optional[ClientData]:
+    client_data = None
+
+    if client_name == "mainsail":
+        client_config_data = ClientConfigData(
+            name="mainsail-config",
+            display_name="Mainsail-Config",
+            cfg_filename="mainsail.cfg",
+            dir=MAINSAIL_CONFIG_DIR,
+            backup_dir=MAINSAIL_CONFIG_BACKUP_DIR,
+            url=MAINSAIL_CONFIG_REPO_URL,
+            printer_cfg_section="include mainsail.cfg",
+            mr_conf_path="~/mainsail-config",
+            mr_conf_origin=MAINSAIL_CONFIG_REPO_URL,
+        )
+        client_data = ClientData(
+            name=client_name,
+            display_name=client_name.capitalize(),
+            dir=MAINSAIL_DIR,
+            backup_dir=MAINSAIL_BACKUP_DIR,
+            url=MAINSAIL_URL,
+            pre_release_url=MAINSAIL_PRE_RLS_URL,
+            tags_url=MAINSAIL_TAGS_URL,
+            remote_mode=True,
+            mr_conf_repo="mainsail-crew/mainsail",
+            mr_conf_path="~/mainsail",
+            client_config=client_config_data,
+        )
+    elif client_name == "fluidd":
+        client_config_data = ClientConfigData(
+            name="fluidd-config",
+            display_name="Fluidd-Config",
+            cfg_filename="fluidd.cfg",
+            dir=FLUIDD_CONFIG_DIR,
+            backup_dir=FLUIDD_CONFIG_BACKUP_DIR,
+            url=FLUIDD_CONFIG_REPO_URL,
+            printer_cfg_section="include fluidd.cfg",
+            mr_conf_path="~/fluidd-config",
+            mr_conf_origin=FLUIDD_CONFIG_REPO_URL,
+        )
+        client_data = ClientData(
+            name=client_name,
+            display_name=client_name.capitalize(),
+            dir=FLUIDD_DIR,
+            backup_dir=FLUIDD_BACKUP_DIR,
+            url=FLUIDD_URL,
+            pre_release_url=FLUIDD_PRE_RLS_URL,
+            tags_url=FLUIDD_TAGS_URL,
+            remote_mode=False,
+            mr_conf_repo="fluidd-core/fluidd",
+            mr_conf_path="~/fluidd",
+            client_config=client_config_data,
+        )
+
+    return client_data
+
+
+def get_client_status(client: ClientData) -> str:
+    return get_install_status_webui(
+        client.get("dir"),
+        NGINX_SITES_AVAILABLE.joinpath(client.get("name")),
+        NGINX_CONFD.joinpath("upstreams.conf"),
+        NGINX_CONFD.joinpath("common_vars.conf"),
+    )
+
+
+def get_client_config_status(client: ClientData) -> Dict[
+    Literal["repo", "local", "remote"],
+    Union[str, int],
+]:
+    client_config = client.get("client_config")
+    client_config = client_config.get("dir")
+
+    return {
+        "repo": RepoManager.get_repo_name(client_config),
+        "local": RepoManager.get_local_commit(client_config),
+        "remote": RepoManager.get_remote_commit(client_config),
+    }
+
+
+def get_current_client_config(clients: List[ClientData]) -> str:
+    installed = []
+    for client in clients:
+        client_config = client.get("client_config")
+        if client_config.get("dir").exists():
+            installed.append(client)
+
+    if len(installed) > 1:
+        return f"{COLOR_YELLOW}Conflict!{RESET_FORMAT}"
+    elif len(installed) == 1:
+        cfg = installed[0].get("client_config")
+        return f"{COLOR_CYAN}{cfg.get('display_name')}{RESET_FORMAT}"
+
+    return f"{COLOR_CYAN}-{RESET_FORMAT}"
+
+
+def backup_mainsail_config_json(is_temp=False) -> None:
+    Logger.print_status(f"Backup '{MAINSAIL_CONFIG_JSON}' ...")
+    bm = BackupManager()
+    if is_temp:
+        fn = Path.home().joinpath("config.json.kiauh.bak")
+        bm.backup_file(MAINSAIL_CONFIG_JSON, custom_filename=fn)
+    else:
+        bm.backup_file(MAINSAIL_CONFIG_JSON)
+
+
+def restore_mainsail_config_json() -> None:
+    try:
+        Logger.print_status(f"Restore '{MAINSAIL_CONFIG_JSON}' ...")
+        source = Path.home().joinpath("config.json.kiauh.bak")
+        shutil.copy(source, MAINSAIL_CONFIG_JSON)
+    except OSError:
+        Logger.print_info("Unable to restore config.json. Skipped ...")
+
+
+def enable_mainsail_remotemode() -> None:
+    Logger.print_status("Enable Mainsails remote mode ...")
+    with open(MAINSAIL_CONFIG_JSON, "r") as f:
+        config_data = json.load(f)
+
+    if config_data["instancesDB"] == "browser":
+        Logger.print_info("Remote mode already configured. Skipped ...")
+        return
+
+    Logger.print_status("Setting instance storage location to 'browser' ...")
+    config_data["instancesDB"] = "browser"
+
+    with open(MAINSAIL_CONFIG_JSON, "w") as f:
+        json.dump(config_data, f, indent=4)
+    Logger.print_ok("Mainsails remote mode enabled!")
+
+
+def symlink_webui_nginx_log(klipper_instances: List[Klipper]) -> None:
+    Logger.print_status("Link NGINX logs into log directory ...")
+    access_log = Path("/var/log/nginx/mainsail-access.log")
+    error_log = Path("/var/log/nginx/mainsail-error.log")
+
+    for instance in klipper_instances:
+        desti_access = instance.log_dir.joinpath("mainsail-access.log")
+        if not desti_access.exists():
+            desti_access.symlink_to(access_log)
+
+        desti_error = instance.log_dir.joinpath("mainsail-error.log")
+        if not desti_error.exists():
+            desti_error.symlink_to(error_log)
+
+
+def get_local_client_version(client: ClientData) -> str:
+    relinfo_file = client.get("dir").joinpath("release_info.json")
+    if not relinfo_file.is_file():
+        return "-"
+
+    with open(relinfo_file, "r") as f:
+        return json.load(f)["version"]
+
+
+def get_remote_client_version(client: ClientData) -> str:
+    try:
+        with urllib.request.urlopen(client.get("tags_url")) as response:
+            data = json.loads(response.read())
+        return data[0]["name"]
+    except (JSONDecodeError, TypeError):
+        return "ERROR"
+
+
+def backup_client_data(client: ClientData) -> None:
+    name = client.get("name")
+    src = client.get("dir")
+    dest = client.get("backup_dir")
+
+    with open(src.joinpath(".version"), "r") as v:
+        version = v.readlines()[0]
+
+    bm = BackupManager()
+    bm.backup_directory(f"{name}-{version}", src, dest)
+    if name == "mainsail":
+        bm.backup_file(MAINSAIL_CONFIG_JSON, dest)
+    bm.backup_file(NGINX_SITES_AVAILABLE.joinpath(name), dest)
+
+
+def backup_client_config_data(client: ClientData) -> None:
+    client_config = client.get("client_config")
+    name = client_config.get("name")
+    source = client_config.get("dir")
+    target = client_config.get("backup_dir")
+    bm = BackupManager()
+    bm.backup_directory(name, source, target)

kiauh/components/webui_client/menus/client_remove_menu.py

@@ -0,0 +1,149 @@
+#!/usr/bin/env python3
+
+# ======================================================================= #
+#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+import textwrap
+from typing import Callable, Dict
+
+from components.webui_client import client_remove, ClientData
+from core.menus import BACK_HELP_FOOTER
+from core.menus.base_menu import BaseMenu
+from utils.constants import RESET_FORMAT, COLOR_RED, COLOR_CYAN
+
+
+# noinspection PyUnusedLocal
+class ClientRemoveMenu(BaseMenu):
+    def __init__(self, client: ClientData):
+        self.client = client
+        self.rm_client = False
+        self.rm_client_config = False
+        self.backup_mainsail_config_json = False
+        self.rm_moonraker_conf_section = False
+        self.rm_printer_cfg_section = False
+
+        super().__init__(
+            header=False,
+            options=self.get_options(),
+            footer_type=BACK_HELP_FOOTER,
+        )
+
+    def get_options(self) -> Dict[str, Callable]:
+        options = {
+            "0": self.toggle_all,
+            "1": self.toggle_rm_client,
+            "2": self.toggle_rm_client_config,
+            "3": self.toggle_rm_printer_cfg_section,
+            "4": self.toggle_rm_moonraker_conf_section,
+            "c": self.run_removal_process,
+        }
+        if self.client.get("name") == "mainsail":
+            options["5"] = self.toggle_backup_mainsail_config_json
+
+        return options
+
+    def print_menu(self) -> None:
+        client_name = self.client.get("display_name")
+        client_config = self.client.get("client_config")
+        client_config_name = client_config.get("display_name")
+
+        header = f" [ Remove {client_name} ] "
+        color = COLOR_RED
+        count = 62 - len(color) - len(RESET_FORMAT)
+        checked = f"[{COLOR_CYAN}x{RESET_FORMAT}]"
+        unchecked = "[ ]"
+        o1 = checked if self.rm_client else unchecked
+        o2 = checked if self.rm_client_config else unchecked
+        o3 = checked if self.rm_printer_cfg_section else unchecked
+        o4 = checked if self.rm_moonraker_conf_section else unchecked
+        menu = textwrap.dedent(
+            f"""
+            /=======================================================\\
+            | {color}{header:~^{count}}{RESET_FORMAT} |
+            |-------------------------------------------------------|
+            | Enter a number and hit enter to select / deselect     |
+            | the specific option for removal.                      |
+            |-------------------------------------------------------|
+            |  0) Select everything                                 |
+            |-------------------------------------------------------|
+            |  1) {o1} Remove {client_name:16}                       |
+            |  2) {o2} Remove {client_config_name:24}               |
+            |                                                       |
+            | printer.cfg & moonraker.conf                          |
+            |  3) {o3} Remove printer.cfg include                    |
+            |  4) {o4} Remove Moonraker update section               |
+            """
+        )[1:]
+
+        if self.client.get("name") == "mainsail":
+            o5 = checked if self.backup_mainsail_config_json else unchecked
+            menu += textwrap.dedent(
+                f"""
+                |                                                       |
+                | Mainsail config.json                                  |
+                |  5) {o5} Backup config.json                            |
+                """
+            )[1:]
+
+        menu += textwrap.dedent(
+            """
+            |-------------------------------------------------------|
+            |  C) Continue                                          |
+            """
+        )[1:]
+        print(menu, end="")
+
+    def toggle_all(self, **kwargs) -> None:
+        self.rm_client = True
+        self.rm_client_config = True
+        self.backup_mainsail_config_json = True
+        self.rm_moonraker_conf_section = True
+        self.rm_printer_cfg_section = True
+
+    def toggle_rm_client(self, **kwargs) -> None:
+        self.rm_client = not self.rm_client
+
+    def toggle_rm_client_config(self, **kwargs) -> None:
+        self.rm_client_config = not self.rm_client_config
+
+    def toggle_backup_mainsail_config_json(self, **kwargs) -> None:
+        self.backup_mainsail_config_json = not self.backup_mainsail_config_json
+
+    def toggle_rm_moonraker_conf_section(self, **kwargs) -> None:
+        self.rm_moonraker_conf_section = not self.rm_moonraker_conf_section
+
+    def toggle_rm_printer_cfg_section(self, **kwargs) -> None:
+        self.rm_printer_cfg_section = not self.rm_printer_cfg_section
+
+    def run_removal_process(self, **kwargs) -> None:
+        if (
+            not self.rm_client
+            and not self.rm_client_config
+            and not self.backup_mainsail_config_json
+            and not self.rm_moonraker_conf_section
+            and not self.rm_printer_cfg_section
+        ):
+            error = f"{COLOR_RED}Nothing selected ...{RESET_FORMAT}"
+            print(error)
+            return
+
+        client_remove.run_client_removal(
+            client=self.client,
+            rm_client=self.rm_client,
+            rm_client_config=self.rm_client_config,
+            backup_ms_config_json=self.backup_mainsail_config_json,
+            rm_moonraker_conf_section=self.rm_moonraker_conf_section,
+            rm_printer_cfg_section=self.rm_printer_cfg_section,
+        )
+
+        self.rm_client = False
+        self.rm_client_config = False
+        self.backup_mainsail_config_json = False
+        self.rm_moonraker_conf_section = False
+        self.rm_printer_cfg_section = False

kiauh/core/menus/backup_menu.py

@@ -12,11 +12,15 @@
 import textwrap
 
 from components.klipper.klipper_utils import backup_klipper_dir
-from components.mainsail.mainsail_utils import backup_mainsail_data
 from components.moonraker.moonraker_utils import (
     backup_moonraker_dir,
     backup_moonraker_db_dir,
 )
+from components.webui_client.client_utils import (
+    backup_client_data,
+    load_client_data,
+    backup_client_config_data,
+)
 from core.menus import BACK_FOOTER
 from core.menus.base_menu import BaseMenu
 from utils.common import backup_printer_config_dir
@@ -35,6 +39,10 @@ class BackupMenu(BaseMenu):
                 "3": self.backup_printer_config,
                 "4": self.backup_moonraker_db,
                 "5": self.backup_mainsail,
+                "6": self.backup_fluidd,
+                "7": self.backup_mainsail_config,
+                "8": self.backup_fluidd_config,
+                "9": self.backup_klipperscreen,
             },
             footer_type=BACK_FOOTER,
         )
@@ -51,15 +59,15 @@ class BackupMenu(BaseMenu):
             |-------------------------------------------------------|
             | {line1:^62} |
             |-------------------------------------------------------|
-            | Klipper & Moonraker API:   | Touchscreen GUI:         |
-            |  1) [Klipper]              |  7) [KlipperScreen]      |
-            |  2) [Moonraker]            |                          |
-            |  3) [Config Folder]        | Other:                   |
-            |  4) [Moonraker Database]   |  9) [Telegram Bot]       |
-            |                            |                          |
-            | Klipper Webinterface:      |                          |
-            |  5) [Mainsail]             |                          |
-            |  6) [Fluidd]               |                          |
+            | Klipper & Moonraker API:  | Client-Config:            |
+            |  1) [Klipper]             |  7) [Mainsail-Config]     |
+            |  2) [Moonraker]           |  8) [Fluidd-Config]       |
+            |  3) [Config Folder]       |                           |
+            |  4) [Moonraker Database]  | Touchscreen GUI:          |
+            |                           |  9) [KlipperScreen]       |
+            | Webinterface:             |                           |
+            |  5) [Mainsail]            |                           |
+            |  6) [Fluidd]              |                           |
             """
         )[1:]
         print(menu, end="")
@@ -77,13 +85,16 @@ class BackupMenu(BaseMenu):
         backup_moonraker_db_dir()
 
     def backup_mainsail(self, **kwargs):
-        backup_mainsail_data()
+        backup_client_data(load_client_data("mainsail"))
 
     def backup_fluidd(self, **kwargs):
-        pass
+        backup_client_data(load_client_data("fluidd"))
+
+    def backup_mainsail_config(self, **kwargs):
+        backup_client_config_data(load_client_data("mainsail"))
+
+    def backup_fluidd_config(self, **kwargs):
+        backup_client_config_data(load_client_data("fluidd"))
 
     def backup_klipperscreen(self, **kwargs):
         pass
-
-    def backup_telegram_bot(self, **kwargs):
-        pass

kiauh/core/menus/install_menu.py

@@ -11,10 +11,10 @@
 
 import textwrap
 
-from components.fluidd import fluidd_setup
 from components.klipper import klipper_setup
-from components.mainsail import mainsail_setup
 from components.moonraker import moonraker_setup
+from components.webui_client import client_setup
+from components.webui_client.client_config import client_config_setup
 from core.menus import BACK_FOOTER
 from core.menus.base_menu import BaseMenu
 from utils.constants import COLOR_GREEN, RESET_FORMAT
@@ -31,13 +31,11 @@ class InstallMenu(BaseMenu):
                 "2": self.install_moonraker,
                 "3": self.install_mainsail,
                 "4": self.install_fluidd,
-                "5": self.install_klipperscreen,
-                "6": self.install_pretty_gcode,
-                "7": self.install_telegram_bot,
-                "8": self.install_obico,
-                "9": self.install_octoeverywhere,
-                "10": self.install_mobileraker,
-                "11": self.install_crowsnest,
+                "5": self.install_mainsail_config,
+                "6": self.install_fluidd_config,
+                "7": None,
+                "8": None,
+                "9": None,
             },
             footer_type=BACK_FOOTER,
         )
@@ -51,16 +49,18 @@ class InstallMenu(BaseMenu):
             /=======================================================\\
             | {color}{header:~^{count}}{RESET_FORMAT} |
             |-------------------------------------------------------|
-            | Firmware & API:          | Other:                     |
-            |  1) [Klipper]            |  6) [PrettyGCode]          |
-            |  2) [Moonraker]          |  7) [Telegram Bot]         |
-            |                          |  8) $(obico_install_title) |
-            | Klipper Webinterface:    |  9) [OctoEverywhere]       |
-            |  3) [Mainsail]           | 10) [Mobileraker]          |
-            |  4) [Fluidd]             |                            |
-            |                          | Webcam Streamer:           |
-            | Touchscreen GUI:         | 11) [Crowsnest]            |
-            |  5) [KlipperScreen]      |                            |
+            | Firmware & API:           | Touchscreen GUI:          |
+            |  1) [Klipper]             |  7) [KlipperScreen]       |
+            |  2) [Moonraker]           |                           |
+            |                           | Android / iOS:            |
+            | Webinterface:             |  8) [Mobileraker]         |
+            |  3) [Mainsail]            |                           |
+            |  4) [Fluidd]              | Webcam Streamer:          |
+            |                           |  9) [Crowsnest]           |
+            | Client-Config:            |                           |
+            |  5) [Mainsail-Config]     |                           |
+            |  6) [Fluidd-Config]       |                           |
+            |                           |                           |
             """
         )[1:]
         print(menu, end="")
@@ -72,28 +72,13 @@ class InstallMenu(BaseMenu):
         moonraker_setup.install_moonraker()
 
     def install_mainsail(self, **kwargs):
-        mainsail_setup.install_mainsail()
+        client_setup.install_client(client_name="mainsail")
+
+    def install_mainsail_config(self, **kwargs):
+        client_config_setup.install_client_config(client_name="mainsail")
 
     def install_fluidd(self, **kwargs):
-        fluidd_setup.install_fluidd()
+        client_setup.install_client(client_name="fluidd")
 
-    def install_klipperscreen(self, **kwargs):
-        print("install_klipperscreen")
-
-    def install_pretty_gcode(self, **kwargs):
-        print("install_pretty_gcode")
-
-    def install_telegram_bot(self, **kwargs):
-        print("install_telegram_bot")
-
-    def install_obico(self, **kwargs):
-        print("install_obico")
-
-    def install_octoeverywhere(self, **kwargs):
-        print("install_octoeverywhere")
-
-    def install_mobileraker(self, **kwargs):
-        print("install_mobileraker")
-
-    def install_crowsnest(self, **kwargs):
-        print("install_crowsnest")
+    def install_fluidd_config(self, **kwargs):
+        client_config_setup.install_client_config(client_name="fluidd")

kiauh/core/menus/main_menu.py

@@ -11,11 +11,14 @@
 
 import textwrap
 
-from components.fluidd.fluidd_utils import get_fluidd_status
 from components.klipper.klipper_utils import get_klipper_status
 from components.log_uploads.menus.log_upload_menu import LogUploadMenu
-from components.mainsail.mainsail_utils import get_mainsail_status
 from components.moonraker.moonraker_utils import get_moonraker_status
+from components.webui_client.client_utils import (
+    get_client_status,
+    load_client_data,
+    get_current_client_config,
+)
 from core.menus import QUIT_FOOTER
 from core.menus.advanced_menu import AdvancedMenu
 from core.menus.backup_menu import BackupMenu
@@ -61,13 +64,11 @@ class MainMenu(BaseMenu):
         self.ks_status = ""
         self.mb_status = ""
         self.cn_status = ""
-        self.tg_status = ""
-        self.ob_status = ""
-        self.oe_status = ""
+        self.cc_status = ""
         self.init_status()
 
     def init_status(self) -> None:
-        status_vars = ["kl", "mr", "ms", "fl", "ks", "mb", "cn", "tg", "ob", "oe"]
+        status_vars = ["kl", "mr", "ms", "fl", "ks", "mb", "cn"]
         for var in status_vars:
             setattr(self, f"{var}_status", f"{COLOR_RED}Not installed!{RESET_FORMAT}")
 
@@ -87,9 +88,15 @@ class MainMenu(BaseMenu):
         self.mr_status = self.format_status_by_code(mr_code, mr_status, mr_instances)
         self.mr_repo = f"{COLOR_CYAN}{moonraker_status.get('repo')}{RESET_FORMAT}"
         # mainsail
-        self.ms_status = get_mainsail_status()
+        mainsail_client_data = load_client_data("mainsail")
+        self.ms_status = get_client_status(mainsail_client_data)
         # fluidd
-        self.fl_status = get_fluidd_status()
+        fluidd_client_data = load_client_data("fluidd")
+        self.fl_status = get_client_status(fluidd_client_data)
+        # client-config
+        self.cc_status = get_current_client_config(
+            [mainsail_client_data, fluidd_client_data]
+        )
 
     def format_status_by_code(self, code: int, status: str, count: str) -> str:
         if code == 1:
@@ -120,13 +127,11 @@ class MainMenu(BaseMenu):
             |  4) [Advanced]   |------------------------------------|
             |  5) [Backup]     |        Mainsail: {self.ms_status:<26} |
             |                  |          Fluidd: {self.fl_status:<26} |
-            |  E) [Extensions] |   KlipperScreen: {self.ks_status:<26} |
-            |                  |     Mobileraker: {self.mb_status:<26} |
+            |  S) [Settings]   |   Client-Config: {self.cc_status:<26} |
             |                  |                                    |
+            | Community:       |   KlipperScreen: {self.ks_status:<26} |
+            |  E) [Extensions] |     Mobileraker: {self.mb_status:<26} |
             |                  |       Crowsnest: {self.cn_status:<26} |
-            |                  |    Telegram Bot: {self.tg_status:<26} |
-            |                  |           Obico: {self.ob_status:<26} |
-            |  S) [Settings]   |  OctoEverywhere: {self.oe_status:<26} |
             |-------------------------------------------------------|
             | {COLOR_CYAN}{footer1:^16}{RESET_FORMAT} | {footer2:^43} |
             """

kiauh/core/menus/remove_menu.py

@@ -11,10 +11,10 @@
 
 import textwrap
 
-from components.fluidd.menus.fluidd_remove_menu import FluiddRemoveMenu
 from components.klipper.menus.klipper_remove_menu import KlipperRemoveMenu
-from components.mainsail.menus.mainsail_remove_menu import MainsailRemoveMenu
 from components.moonraker.menus.moonraker_remove_menu import MoonrakerRemoveMenu
+from components.webui_client.client_utils import load_client_data
+from components.webui_client.menus.client_remove_menu import ClientRemoveMenu
 from core.menus import BACK_FOOTER
 from core.menus.base_menu import BaseMenu
 from utils.constants import COLOR_RED, RESET_FORMAT
@@ -29,8 +29,8 @@ class RemoveMenu(BaseMenu):
             options={
                 "1": KlipperRemoveMenu,
                 "2": MoonrakerRemoveMenu,
-                "3": MainsailRemoveMenu,
-                "4": FluiddRemoveMenu,
+                "3": ClientRemoveMenu(client=load_client_data("mainsail")),
+                "4": ClientRemoveMenu(client=load_client_data("fluidd")),
                 "5": None,
                 "6": None,
                 "7": None,

kiauh/core/menus/update_menu.py

@@ -11,22 +11,22 @@
 
 import textwrap
 
-from components.fluidd.fluidd_setup import update_fluidd
-from components.fluidd.fluidd_utils import (
-    get_fluidd_local_version,
-    get_fluidd_remote_version,
-)
 from components.klipper.klipper_setup import update_klipper
 from components.klipper.klipper_utils import (
     get_klipper_status,
 )
-from components.mainsail.mainsail_setup import update_mainsail
-from components.mainsail.mainsail_utils import (
-    get_mainsail_local_version,
-    get_mainsail_remote_version,
-)
 from components.moonraker.moonraker_setup import update_moonraker
 from components.moonraker.moonraker_utils import get_moonraker_status
+from components.webui_client.client_config.client_config_setup import (
+    update_client_config,
+)
+from components.webui_client.client_setup import update_client
+from components.webui_client.client_utils import (
+    get_local_client_version,
+    get_remote_client_version,
+    load_client_data,
+    get_client_config_status,
+)
 from core.menus import BACK_FOOTER
 from core.menus.base_menu import BaseMenu
 from utils.constants import (
@@ -50,14 +50,12 @@ class UpdateMenu(BaseMenu):
                 "2": self.update_moonraker,
                 "3": self.update_mainsail,
                 "4": self.update_fluidd,
-                "5": self.update_klipperscreen,
-                "6": self.update_pgc_for_klipper,
-                "7": self.update_telegram_bot,
-                "8": self.update_moonraker_obico,
-                "9": self.update_octoeverywhere,
-                "10": self.update_mobileraker,
-                "11": self.update_crowsnest,
-                "12": self.upgrade_system_packages,
+                "5": self.update_mainsail_config,
+                "6": self.update_fluidd_config,
+                "7": self.update_klipperscreen,
+                "8": self.update_mobileraker,
+                "9": self.update_crowsnest,
+                "10": self.upgrade_system_packages,
             },
             footer_type=BACK_FOOTER,
         )
@@ -69,6 +67,10 @@ class UpdateMenu(BaseMenu):
         self.ms_remote = f"{COLOR_WHITE}{RESET_FORMAT}"
         self.fl_local = f"{COLOR_WHITE}{RESET_FORMAT}"
         self.fl_remote = f"{COLOR_WHITE}{RESET_FORMAT}"
+        self.mc_local = f"{COLOR_WHITE}{RESET_FORMAT}"
+        self.mc_remote = f"{COLOR_WHITE}{RESET_FORMAT}"
+        self.fc_local = f"{COLOR_WHITE}{RESET_FORMAT}"
+        self.fc_remote = f"{COLOR_WHITE}{RESET_FORMAT}"
 
     def print_menu(self):
         self.fetch_update_status()
@@ -87,22 +89,20 @@ class UpdateMenu(BaseMenu):
             |  1) Klipper           | {self.kl_local:<22} | {self.kl_remote:<22} |
             |  2) Moonraker         | {self.mr_local:<22} | {self.mr_remote:<22} |
             |                       |               |               |
-            | Klipper Webinterface: |---------------|---------------|
+            | Webinterface:         |---------------|---------------|
             |  3) Mainsail          | {self.ms_local:<22} | {self.ms_remote:<22} |
             |  4) Fluidd            | {self.fl_local:<22} | {self.fl_remote:<22} |
             |                       |               |               |
-            | Touchscreen GUI:      |---------------|---------------|
-            |  5) KlipperScreen     |               |               |
+            | Client-Config:        |---------------|---------------|
+            |  5) Mainsail-Config   | {self.mc_local:<22} | {self.mc_remote:<22} |
+            |  6) Fluidd-Config     | {self.fc_local:<22} | {self.fc_remote:<22} |
             |                       |               |               |
             | Other:                |---------------|---------------|
-            |  6) PrettyGCode       |               |               |
-            |  7) Telegram Bot      |               |               |
-            |  8) Obico for Klipper |               |               |
-            |  9) OctoEverywhere    |               |               |
-            | 10) Mobileraker       |               |               |
-            | 11) Crowsnest         |               |               |
+            |  7) KlipperScreen     |               |               |
+            |  8) Mobileraker       |               |               |
+            |  9) Crowsnest         |               |               |
             |                       |-------------------------------|
-            | 12) System            |                               |
+            | 10) System            |                               |
             """
         )[1:]
         print(menu, end="")
@@ -117,34 +117,24 @@ class UpdateMenu(BaseMenu):
         update_moonraker()
 
     def update_mainsail(self, **kwargs):
-        update_mainsail()
+        update_client(load_client_data("mainsail"))
+
+    def update_mainsail_config(self, **kwargs):
+        update_client_config(load_client_data("mainsail"))
 
     def update_fluidd(self, **kwargs):
-        update_fluidd()
+        update_client(load_client_data("fluidd"))
 
-    def update_klipperscreen(self, **kwargs):
-        print("update_klipperscreen")
+    def update_fluidd_config(self, **kwargs):
+        update_client_config(load_client_data("fluidd"))
 
-    def update_pgc_for_klipper(self, **kwargs):
-        print("update_pgc_for_klipper")
+    def update_klipperscreen(self, **kwargs): ...
 
-    def update_telegram_bot(self, **kwargs):
-        print("update_telegram_bot")
+    def update_mobileraker(self, **kwargs): ...
 
-    def update_moonraker_obico(self, **kwargs):
-        print("update_moonraker_obico")
+    def update_crowsnest(self, **kwargs): ...
 
-    def update_octoeverywhere(self, **kwargs):
-        print("update_octoeverywhere")
-
-    def update_mobileraker(self, **kwargs):
-        print("update_mobileraker")
-
-    def update_crowsnest(self, **kwargs):
-        print("update_crowsnest")
-
-    def upgrade_system_packages(self, **kwargs):
-        print("upgrade_system_packages")
+    def upgrade_system_packages(self, **kwargs): ...
 
     def fetch_update_status(self):
         # klipper
@@ -166,18 +156,38 @@ class UpdateMenu(BaseMenu):
             self.mr_local = f"{COLOR_YELLOW}{self.mr_local}{RESET_FORMAT}"
         self.mr_remote = f"{COLOR_GREEN}{self.mr_remote}{RESET_FORMAT}"
         # mainsail
-        self.ms_local = get_mainsail_local_version()
-        self.ms_remote = get_mainsail_remote_version()
+        mainsail_client_data = load_client_data("mainsail")
+        self.ms_local = get_local_client_version(mainsail_client_data)
+        self.ms_remote = get_remote_client_version(mainsail_client_data)
         if self.ms_local == self.ms_remote:
             self.ms_local = f"{COLOR_GREEN}{self.ms_local}{RESET_FORMAT}"
         else:
             self.ms_local = f"{COLOR_YELLOW}{self.ms_local}{RESET_FORMAT}"
         self.ms_remote = f"{COLOR_GREEN if self.ms_remote != 'ERROR' else COLOR_RED}{self.ms_remote}{RESET_FORMAT}"
         # fluidd
-        self.fl_local = get_fluidd_local_version()
-        self.fl_remote = get_fluidd_remote_version()
+        fluidd_client_data = load_client_data("fluidd")
+        self.fl_local = get_local_client_version(fluidd_client_data)
+        self.fl_remote = get_remote_client_version(fluidd_client_data)
         if self.fl_local == self.fl_remote:
             self.fl_local = f"{COLOR_GREEN}{self.fl_local}{RESET_FORMAT}"
         else:
             self.fl_local = f"{COLOR_YELLOW}{self.fl_local}{RESET_FORMAT}"
         self.fl_remote = f"{COLOR_GREEN if self.fl_remote != 'ERROR' else COLOR_RED}{self.fl_remote}{RESET_FORMAT}"
+        # mainsail-config
+        mc_status = get_client_config_status(load_client_data("mainsail"))
+        self.mc_local = mc_status.get("local")
+        self.mc_remote = mc_status.get("remote")
+        if self.mc_local == self.mc_remote:
+            self.mc_local = f"{COLOR_GREEN}{self.mc_local}{RESET_FORMAT}"
+        else:
+            self.mc_local = f"{COLOR_YELLOW}{self.mc_local}{RESET_FORMAT}"
+        self.mc_remote = f"{COLOR_GREEN}{self.mc_remote}{RESET_FORMAT}"
+        # fluidd-config
+        fc_status = get_client_config_status(load_client_data("fluidd"))
+        self.fc_local = fc_status.get("local")
+        self.fc_remote = fc_status.get("remote")
+        if self.fc_local == self.mc_remote:
+            self.fc_local = f"{COLOR_GREEN}{self.fc_local}{RESET_FORMAT}"
+        else:
+            self.fc_local = f"{COLOR_YELLOW}{self.fc_local}{RESET_FORMAT}"
+        self.fc_remote = f"{COLOR_GREEN}{self.fc_remote}{RESET_FORMAT}"

kiauh/utils/filesystem_utils.py

@@ -1,4 +1,5 @@
 #!/usr/bin/env python3
+
 # ======================================================================= #
 #  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
 #                                                                         #
@@ -7,14 +8,20 @@
 #                                                                         #
 #  This file may be distributed under the terms of the GNU GPLv3 license  #
 # ======================================================================= #
+
 import re
 import shutil
 import subprocess
 from pathlib import Path
 from zipfile import ZipFile
 
-from typing import List
+from typing import List, Type, TypeVar, Union, Tuple
 
+from components.klipper.klipper import Klipper
+from components.moonraker.moonraker import Moonraker
+from core.config_manager.config_manager import ConfigManager
+from core.instance_manager.base_instance import BaseInstance
+from core.instance_manager.instance_manager import InstanceManager
 from utils import (
     NGINX_SITES_AVAILABLE,
     MODULE_PATH,
@@ -24,6 +31,10 @@ from utils import (
 from utils.logger import Logger
 
 
+B = TypeVar('B', bound='BaseInstance')
+ConfigOption = Tuple[str, str]
+
+
 def check_file_exist(file_path: Path, sudo=False) -> bool:
     """
     Helper function for checking the existence of a file |
@@ -169,3 +180,102 @@ def get_next_free_port(ports_in_use: List[str]) -> str:
     used_ports = set(map(int, ports_in_use))
 
     return str(min(valid_ports - used_ports))
+
+
+def add_config_section(section: str, instances: List[B], options: List[ConfigOption] = None) -> None:
+    for instance in instances:
+        cfg_file = instance.cfg_file
+        Logger.print_status(f"Add section '[{section}]' to '{cfg_file}' ...")
+
+        if not Path(cfg_file).exists():
+            Logger.print_warn(f"'{cfg_file}' not found!")
+            continue
+
+        cm = ConfigManager(cfg_file)
+        if cm.config.has_section(section):
+            Logger.print_info("Section already exist. Skipped ...")
+            continue
+
+        cm.config.add_section(section)
+
+        if options is not None:
+            for option in options:
+                cm.config.set(section, option[0], option[1])
+
+        cm.write_config()
+
+
+def remove_config_section(section: str, instances: List[B]) -> None:
+    for instance in instances:
+        cfg_file = instance.cfg_file
+        Logger.print_status(f"Remove section '[{section}]' from '{cfg_file}' ...")
+
+        if not Path(cfg_file).exists():
+            Logger.print_warn(f"'{cfg_file}' not found!")
+            continue
+
+        cm = ConfigManager(cfg_file)
+        if not cm.config.has_section(section):
+            Logger.print_info("Section does not exist. Skipped ...")
+            continue
+
+        cm.config.remove_section(section)
+        cm.write_config()
+
+
+def patch_moonraker_conf(
+    moonraker_instances: List[Moonraker],
+    name: str,
+    section_name: str,
+    template_file: str,
+) -> None:
+    for instance in moonraker_instances:
+        cfg_file = instance.cfg_file
+        Logger.print_status(f"Add {name} update section to '{cfg_file}' ...")
+
+        if not Path(cfg_file).exists():
+            Logger.print_warn(f"'{cfg_file}' not found!")
+            return
+
+        cm = ConfigManager(cfg_file)
+        if cm.config.has_section(section_name):
+            Logger.print_info("Section already exist. Skipped ...")
+            return
+
+        template = MODULE_PATH.joinpath("assets", template_file)
+        with open(template, "r") as t:
+            template_content = "\n"
+            template_content += t.read()
+
+        with open(cfg_file, "a") as f:
+            f.write(template_content)
+
+
+def remove_nginx_config(name: str) -> None:
+    Logger.print_status(f"Removing NGINX config for {name.capitalize()} ...")
+    try:
+        remove_file(NGINX_SITES_AVAILABLE.joinpath(name), True)
+        remove_file(NGINX_SITES_ENABLED.joinpath(name), True)
+
+    except subprocess.CalledProcessError as e:
+        log = f"Unable to remove NGINX config '{name}':\n{e.stderr.decode()}"
+        Logger.print_error(log)
+
+
+def remove_nginx_logs(name: str) -> None:
+    Logger.print_status(f"Removing NGINX logs for {name.capitalize()} ...")
+    try:
+        remove_file(Path(f"/var/log/nginx/{name}-access.log"), True)
+        remove_file(Path(f"/var/log/nginx/{name}-error.log"), True)
+
+        im = InstanceManager(Klipper)
+        instances: List[Klipper] = im.instances
+        if not instances:
+            return
+
+        for instance in instances:
+            remove_file(instance.log_dir.joinpath(f"{name}-access.log"))
+            remove_file(instance.log_dir.joinpath(f"{name}-error.log"))
+
+    except (OSError, subprocess.CalledProcessError) as e:
+        Logger.print_error(f"Unable to remove NGINX logs:\n{e}")

resources/example.printer.cfg

@@ -1,7 +1,11 @@
 [mcu]
 serial: /dev/serial/by-id/<your-mcu-id>
 
+[virtual_sdcard]
+path: %GCODES_DIR%
+on_error_gcode: CANCEL_PRINT
+
 [printer]
 kinematics: none
 max_velocity: 1000
-max_accel: 1000
+max_accel: 1000

scripts/backup.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -33,23 +33,25 @@ function backup_before_update() {
 
 function backup_config_dir() {
   check_for_backup_dir
-  local current_date instance_names config_pathes
+  local current_date config_pathes
 
   config_pathes=$(get_config_folders)
-  readarray -t -d" " instance_names < <(get_multi_instance_names)
 
   if [[ -n "${config_pathes}" ]]; then
     current_date=$(get_date)
     status_msg "Timestamp: ${current_date}"
 
-    local i=0 folder
+    local i=0 folder folder_name target_dir
     for folder in ${config_pathes}; do
-      local folder_name="${instance_names[${i}]}"
       status_msg "Create backup of ${folder} ..."
-      mkdir -p "${BACKUP_DIR}/configs/${current_date}/${folder_name}"
-      cp -r "${folder}" "${_}"
-      ok_msg "Backup created in:\n${BACKUP_DIR}/configs/${current_date}/${folder_name}"
+
+      folder_name=$(echo "${folder}" | rev | cut -d"/" -f2 | rev)
+      target_dir="${BACKUP_DIR}/configs/${current_date}/${folder_name}"
+      mkdir -p "${target_dir}"
+      cp -r "${folder}" "${target_dir}"
       i=$(( i + 1 ))
+
+      ok_msg "Backup created in:\n${target_dir}"
     done
   else
     ok_msg "No config directory found! Skipping backup ..."
@@ -61,20 +63,22 @@ function backup_moonraker_database() {
   local current_date db_pathes
 
   db_pathes=$(get_instance_folder_path "database")
-  readarray -t -d" " instance_names < <(get_multi_instance_names)
 
   if [[ -n ${db_pathes} ]]; then
     current_date=$(get_date)
     status_msg "Timestamp: ${current_date}"
 
-    local i=0 database
+    local i=0 database folder_name target_dir
     for database in ${db_pathes}; do
-      local folder_name="${instance_names[${i}]}"
       status_msg "Create backup of ${database} ..."
-      mkdir -p "${BACKUP_DIR}/moonraker_databases/${current_date}/${folder_name}"
-      cp -r "${database}" "${_}"
-      ok_msg "Backup created in:\n${BACKUP_DIR}/moonraker_databases/${current_date}/${folder_name}"
+
+      folder_name=$(echo "${database}" | rev | cut -d"/" -f2 | rev)
+      target_dir="${BACKUP_DIR}/moonraker_databases/${current_date}/${folder_name}"
+      mkdir -p "${target_dir}"
+      cp -r "${database}" "${target_dir}"
       i=$(( i + 1 ))
+
+      ok_msg "Backup created in:\n${target_dir}"
     done
   else
     print_error "No Moonraker database found! Skipping backup ..."
@@ -191,3 +195,19 @@ function backup_telegram_bot() {
     print_error "Can't back up MoonrakerTelegramBot directory!\n Not found!"
   fi
 }
+
+function backup_octoeverywhere() {
+  local current_date
+
+  if [[ -d ${OCTOEVERYWHERE_DIR} ]] ; then
+    status_msg "Creating OctoEverywhere backup ..."
+    check_for_backup_dir
+    current_date=$(get_date)
+    status_msg "Timestamp: ${current_date}"
+    mkdir -p "${BACKUP_DIR}/OctoEverywhere-backups/${current_date}"
+    cp -r "${OCTOEVERYWHERE_DIR}" "${_}" && cp -r "${OCTOEVERYWHERE_ENV}" "${_}"
+    print_confirm "OctoEverywhere backup complete!"
+  else
+    print_error "Can't back up OctoEverywhere directory!\n Not found!"
+  fi
+}

scripts/crowsnest.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/flash_klipper.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -52,16 +52,57 @@ function init_flash_process() {
     esac
   done
 
-  ### step 2: select how the mcu is connected to the host
+  ### step 2: select how the mcu is flashed (flash/serialflash)
+  select_flash_command
+
+  ### step 3: select how the mcu is connected to the host
   select_mcu_connection
 
-  ### step 3: select which detected mcu should be flashed
+  ### step 4: select which detected mcu should be flashed
   select_mcu_id "${method}"
 }
 
 #================================================#
 #=================== STEP 2 =====================#
 #================================================#
+function select_flash_command() {
+  unset flash_command
+
+  top_border
+  echo -e "| How to flash MCU?                                     |"
+  echo -e "| 1) make flash (default)                               |"
+  echo -e "| 2) make serialflash (stm32flash)                      |"
+  blank_line
+  back_help_footer
+
+  local choice
+  while true; do
+    read -p "${cyan}###### Flashing command:${white} " -i "1" -e choice
+    case "${choice}" in
+      1)
+        select_msg "Selected 'make flash' command"
+        flash_command="flash"
+        break;;
+      2)
+        select_msg "Selected 'make serialflash' command"
+        flash_command="serialflash"
+        break;;
+      B|b)
+        advanced_menu
+        break;;
+      H|h)
+        clear && print_header
+        show_mcu_flash_command_help
+        break;;
+      *)
+        error_msg "Invalid command!";;
+    esac
+  done
+}
+
+#================================================#
+#=================== STEP 3 =====================#
+#================================================#
 function select_mcu_connection() {
   top_border
   echo -e "| ${yellow}Make sure that the controller board is connected now!${white} |"
@@ -112,7 +153,6 @@ function print_detected_mcu_to_screen() {
   fi
 
   for mcu in "${mcu_list[@]}"; do
-    mcu=$(echo "${mcu}" | rev | cut -d"/" -f1 | rev)
     echo -e " ● MCU #${i}: ${cyan}${mcu}${white}"
     i=$(( i + 1 ))
   done
@@ -120,7 +160,7 @@ function print_detected_mcu_to_screen() {
 }
 
 #================================================#
-#=================== STEP 3 =====================#
+#=================== STEP 4 =====================#
 #================================================#
 function select_mcu_id() {
   local i=0 sel_index=0 method=${1}
@@ -195,7 +235,7 @@ function start_flash_mcu() {
   local device=${1}
   do_action_service "stop" "klipper"
 
-  if make flash FLASH_DEVICE="${device}"; then
+  if make ${flash_command} FLASH_DEVICE="${device}"; then
     ok_msg "Flashing successfull!"
   else
     warn_msg "Flashing failed!"
@@ -387,6 +427,36 @@ function show_flash_method_help() {
   done
 }
 
+function show_mcu_flash_command_help() {
+  top_border
+  echo -e "|     ~~~~~~~~ < ? > Help: Flash MCU < ? > ~~~~~~~~     |"
+  hr
+  echo -e "| ${cyan}make flash:${white}                                           |"
+  echo -e "| The default command to flash controller board, it     |"
+  echo -e "| will detect selected microcontroller and use suitable |"
+  echo -e "| tool for flashing it.                                 |"
+  blank_line
+  echo -e "| ${cyan}make serialflash:${white}                                     |"
+  echo -e "| Special command to flash STM32 microcontrollers in    |"
+  echo -e "| DFU mode but connected via serial. stm32flash command |"
+  echo -e "| will be used internally.                              |"
+  blank_line
+  back_footer
+
+  local choice
+  while true; do
+    read -p "${cyan}###### Please select:${white} " choice
+    case "${choice}" in
+      B|b)
+        clear && print_header
+        select_flash_command
+        break;;
+      *)
+        error_msg "Invalid command!";;
+    esac
+  done
+}
+
 function show_mcu_connection_help() {
   top_border
   echo -e "|     ~~~~~~~~ < ? > Help: Flash MCU < ? > ~~~~~~~~     |"

scripts/fluidd.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/gcode_shell_command.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/globals.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/klipper.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -244,6 +244,7 @@ function run_klipper_setup() {
 
   ### finalizing the setup with writing instance names to the kiauh.ini
   set_multi_instance_names
+  mask_disrupting_services
 
   print_confirm "${confirm}" && return
 }
@@ -333,6 +334,7 @@ function create_klipper_service() {
 
   local printer_data
   local cfg_dir
+  local gcodes_dir
   local cfg
   local log
   local klippy_serial
@@ -345,6 +347,7 @@ function create_klipper_service() {
 
   printer_data="${HOME}/${instance_name}_data"
   cfg_dir="${printer_data}/config"
+  gcodes_dir="${printer_data}/gcodes"
   cfg="${cfg_dir}/printer.cfg"
   log="${printer_data}/logs/klippy.log"
   klippy_serial="${printer_data}/comms/klippy.serial"
@@ -375,18 +378,20 @@ function create_klipper_service() {
   fi
 
   if [[ ! -f ${cfg} ]]; then
-    write_example_printer_cfg "${cfg}"
+    write_example_printer_cfg "${cfg}" "${gcodes_dir}"
   fi
 }
 
 function write_example_printer_cfg() {
   local cfg=${1}
+  local gcodes_dir=${2}
   local cfg_template
 
   cfg_template="${KIAUH_SRCDIR}/resources/example.printer.cfg"
 
   status_msg "Creating minimal example printer.cfg ..."
   if cp "${cfg_template}" "${cfg}"; then
+    sed -i "s|%GCODES_DIR%|${gcodes_dir}|" "${cfg}"
     ok_msg "Minimal example printer.cfg created!"
   else
     error_msg "Couldn't create minimal example printer.cfg!"
@@ -625,3 +630,34 @@ function get_klipper_python_ver() {
   version=$("${KLIPPY_ENV}"/bin/python --version 2>&1 | cut -d" " -f2 | cut -d"." -f1)
   echo "${version}"
 }
+
+function mask_disrupting_services() {
+  local brltty="false"
+  local brltty_udev="false"
+  local modem_manager="false"
+
+  [[ $(dpkg -s brltty  2>/dev/null | grep "Status") = *\ installed ]] && brltty="true"
+  [[ $(dpkg -s brltty-udev  2>/dev/null | grep "Status") = *\ installed ]] && brltty_udev="true"
+  [[ $(dpkg -s ModemManager  2>/dev/null | grep "Status") = *\ installed ]] && modem_manager="true"
+
+  status_msg "Installed brltty package detected, masking brltty service ..."
+  if [[ ${brltty} == "true" ]]; then
+    sudo systemctl stop brltty
+    sudo systemctl mask brltty
+  fi
+  ok_msg "brltty service masked!"
+
+  status_msg "Installed brltty-udev package detected, masking brltty-udev service ..."
+  if [[ ${brltty_udev} == "true" ]]; then
+    sudo systemctl stop brltty-udev
+    sudo systemctl mask brltty-udev
+  fi
+  ok_msg "brltty-udev service masked!"
+
+  status_msg "Installed ModemManager package detected, masking ModemManager service ..."
+  if [[ ${modem_manager} == "true" ]]; then
+    sudo systemctl stop ModemManager
+    sudo systemctl mask ModemManager
+  fi
+  ok_msg "ModemManager service masked!"
+}

scripts/klipperscreen.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -119,6 +119,8 @@ function update_klipperscreen() {
   old_md5=$(md5sum "${KLIPPERSCREEN_DIR}/scripts/KlipperScreen-requirements.txt" | cut -d " " -f1)
 
   do_action_service "stop" "KlipperScreen"
+  backup_before_update "klipperscreen"
+
   cd "${KLIPPERSCREEN_DIR}"
   git pull origin master -q && ok_msg "Fetch successfull!"
   git checkout -f master && ok_msg "Checkout successfull"

scripts/mainsail.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/mjpg-streamer.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/mobileraker.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -61,8 +61,8 @@ function mobileraker_setup() {
     exit 1
   fi
 
-  status_msg "Installing Mobileraker's companion ..."
-  if "${MOBILERAKER_DIR}"/scripts/install-mobileraker-companion.sh; then
+  status_msg "Starting installer of Mobileraker's companion ..."
+  if "${MOBILERAKER_DIR}"/scripts/install.sh; then
     ok_msg "Mobileraker's companion successfully installed!"
   else
     print_error "Mobileraker's companion installation failed!"
@@ -233,7 +233,7 @@ primary_branch:main
 managed_services: mobileraker
 env: ${HOME}/mobileraker-env/bin/python
 requirements: scripts/mobileraker-requirements.txt
-install_script: scripts/install-mobileraker-companion.sh
+install_script: scripts/install.sh
 MOONRAKER_CONF
 
     fi

scripts/moonraker-telegram-bot.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/moonraker.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/nginx.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/obico.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -63,7 +63,7 @@ function obico_server_url_prompt() {
 }
 
 function moonraker_obico_setup_dialog() {
-  status_msg "Initializing Moonraker-obico installation ..."
+  status_msg "Initializing Obico installation ..."
 
   local moonraker_count
   local moonraker_names
@@ -73,7 +73,7 @@ function moonraker_obico_setup_dialog() {
   if (( moonraker_count == 0 )); then
     ### return early if moonraker is not installed
     local error="Moonraker not installed! Please install Moonraker first!"
-    log_error "Moonraker-obico setup started without Moonraker being installed. Aborting setup."
+    log_error "Obico setup started without Moonraker being installed. Aborting setup."
     print_error "${error}" && return
   elif (( moonraker_count > 1 )); then
     # moonraker_names is valid only in case of multi-instance
@@ -90,10 +90,10 @@ function moonraker_obico_setup_dialog() {
   if (( allowed_moonraker_obico_count == 0 && moonraker_count > 0 )) && [[ $(get_moonraker_obico_status) != "Not linked!" ]]; then
     local yn
     while true; do
-      echo "${yellow}Obico for Klipper is already installed.${white}"
+      echo "${yellow}Obico is already installed.${white}"
       echo "It is safe to run the install again to repair any issues."
       echo ""
-      local question="Do you want to reinstall Obico for Klipper?"
+      local question="Do you want to reinstall Obico?"
       read -p "${cyan}###### ${question} (Y/n):${white} " yn
       case "${yn}" in
         Y|y|Yes|yes|"")
@@ -101,7 +101,7 @@ function moonraker_obico_setup_dialog() {
           break;;
         N|n|No|no)
           select_msg "No"
-          abort_msg "Exiting Obico for Klipper installation...\n"
+          abort_msg "Exiting Obico installation...\n"
           return;;
         *)
           error_msg "Invalid Input!";;
@@ -126,31 +126,30 @@ function moonraker_obico_setup_dialog() {
       done
       blank_line
       if (( existing_moonraker_obico_count > 0 )); then
-        printf "|${green}%-55s${white}|\n" " ${existing_moonraker_obico_count} Moonraker-obico instances already installed!"
+        printf "|${green}%-55s${white}|\n" " ${existing_moonraker_obico_count} Obico instances already installed!"
         for svc in ${moonraker_obico_services}; do
           printf "|${cyan}%-57s${white}|\n" " ● moonraker-obco-$(get_instance_name "${svc}")"
         done
       fi
       blank_line
-      echo -e "| The setup will apply the same names to                |"
-      echo -e "| Moonraker-obico!                                      |"
+      echo -e "| The setup will apply the same names to Obico!         |"
       blank_line
-      echo -e "| Please select the number of Moonraker-obico instances |"
-      echo -e "| to install. Usually one Moonraker-obico instance per  |"
+      echo -e "| Please select the number of Obico instances           |"
+      echo -e "| to install. Usually one Obico instance per            |"
       echo -e "| Moonraker instance is required, but you may not       |"
-      echo -e "| install more Moonraker-obico instances than available |"
+      echo -e "| install more Obico instances than available           |"
       echo -e "| Moonraker instances.                                  |"
       bottom_border
 
       ### ask for amount of instances
       local re="^[1-9][0-9]*$"
       while [[ ! ${new_moonraker_obico_count} =~ ${re} || ${new_moonraker_obico_count} -gt ${allowed_moonraker_obico_count} ]]; do
-        read -p "${cyan}###### Number of new Moonraker-obico instances to set up:${white} " -i "${allowed_moonraker_obico_count}" -e new_moonraker_obico_count
+        read -p "${cyan}###### Number of new Obico instances to set up:${white} " -i "${allowed_moonraker_obico_count}" -e new_moonraker_obico_count
         ### break if input is valid
         [[ ${new_moonraker_obico_count} =~ ${re} && ${new_moonraker_obico_count} -le ${allowed_moonraker_obico_count} ]] && break
         ### conditional error messages
         [[ ! ${new_moonraker_obico_count} =~ ${re} ]] && error_msg "Input not a number"
-        (( new_moonraker_obico_count > allowed_moonraker_obico_count )) && error_msg "Number of Moonraker-obico instances larger than installed Moonraker instances"
+        (( new_moonraker_obico_count > allowed_moonraker_obico_count )) && error_msg "Number of Obico instances larger than installed Moonraker instances"
       done && select_msg "${new_moonraker_obico_count}"
     else
       log_error "Internal error. moonraker_count of '${moonraker_count}' not equal or grather than one!"
@@ -160,8 +159,8 @@ function moonraker_obico_setup_dialog() {
     ### Step 2: Confirm instance amount
     local yn
     while true; do
-      (( new_moonraker_obico_count == 1 )) && local question="Install Moonraker-obico?"
-      (( new_moonraker_obico_count > 1 )) && local question="Install ${new_moonraker_obico_count} Moonraker-obico instances?"
+      (( new_moonraker_obico_count == 1 )) && local question="Install Obico?"
+      (( new_moonraker_obico_count > 1 )) && local question="Install ${new_moonraker_obico_count} Obico instances?"
       read -p "${cyan}###### ${question} (Y/n):${white} " yn
       case "${yn}" in
         Y|y|Yes|yes|"")
@@ -169,7 +168,7 @@ function moonraker_obico_setup_dialog() {
           break;;
         N|n|No|no)
           select_msg "No"
-          abort_msg "Exiting Moonraker-obico setup ...\n"
+          abort_msg "Exiting Obico setup ...\n"
           return;;
         *)
           error_msg "Invalid Input!";;
@@ -191,8 +190,8 @@ function moonraker_obico_setup_dialog() {
       fi
     done
 
-    (( new_moonraker_obico_count > 1 )) && status_msg "Installing ${new_moonraker_obico_count} Moonraker-obico instances ..."
-    (( new_moonraker_obico_count == 1 )) && status_msg "Installing Moonraker-obico ..."
+    (( new_moonraker_obico_count > 1 )) && status_msg "Installing ${new_moonraker_obico_count} Obico instances ..."
+    (( new_moonraker_obico_count == 1 )) && status_msg "Installing Obico ..."
 
     ### Step 5: Clone the moonraker-obico repo
     clone_moonraker_obico "${MOONRAKER_OBICO_REPO}"
@@ -244,17 +243,16 @@ function moonraker_obico_setup_dialog() {
   if (( ${#not_linked_instances[@]} > 0 )); then
     top_border
     if (( moonraker_count == 1 )); then
-      printf "|${green}%-55s${white}|\n" " Moonraker-obico not linked to the server!"
+      printf "|${green}%-55s${white}|\n" " Obico not linked to the server!"
     else
-      printf "|${green}%-55s${white}|\n" " ${#not_linked_instances[@]} Moonraker-obico instances not linked to the server!"
+      printf "|${green}%-55s${white}|\n" " ${#not_linked_instances[@]} Obico instances not linked to the server!"
       for i in "${not_linked_instances[@]}"; do
         printf "|${cyan}%-57s${white}|\n" " ● moonraker-obico-${moonraker_names[${i}]}"
       done
     fi
     blank_line
-    echo -e "| To link to your Obico Server account, you need to     |"
-    echo -e "| obtain the 6-digit verification code in the Obico     |"
-    echo -e "| mobile or web app. For more information, visit:       |"
+    echo -e "| It will take only 10 seconds to link printer to Obico.|"
+    echo -e "| For more information, visit:                          |"
     echo -e "| https://www.obico.io/docs/user-guides/klipper-setup/  |"
     blank_line
     echo -e "| If you don't want to link the printer now, you can    |"
@@ -272,7 +270,7 @@ function moonraker_obico_setup_dialog() {
           break;;
         N|n|No|no)
           select_msg "No"
-          abort_msg "Exiting Moonraker-obico setup ...\n"
+          abort_msg "Exiting Obico setup ...\n"
           return;;
         *)
           error_msg "Invalid Input!";;
@@ -295,13 +293,13 @@ function moonraker_obico_setup_dialog() {
 function clone_moonraker_obico() {
   local repo=${1}
 
-  status_msg "Cloning Moonraker-obico from ${repo} ..."
-  ### force remove existing Moonraker-obico dir
+  status_msg "Cloning Obico from ${repo} ..."
+  ### force remove existing Obico dir
   [[ -d "${MOONRAKER_OBICO_DIR}" ]] && rm -rf "${MOONRAKER_OBICO_DIR}"
 
   cd "${HOME}" || exit 1
   if ! git clone "${repo}" "${MOONRAKER_OBICO_DIR}"; then
-    print_error "Cloning Moonraker-obico from\n ${repo}\n failed!"
+    print_error "Cloning Obico from\n ${repo}\n failed!"
     exit 1
   fi
 }
@@ -316,7 +314,7 @@ function moonraker_obico_install() {
 
 function remove_moonraker_obico_systemd() {
   [[ -z $(moonraker_obico_systemd) ]] && return
-  status_msg "Removing Moonraker-obico Systemd Services ..."
+  status_msg "Removing Obico Systemd Services ..."
 
   for service in $(moonraker_obico_systemd | cut -d"/" -f5); do
     status_msg "Removing ${service} ..."
@@ -329,7 +327,7 @@ function remove_moonraker_obico_systemd() {
   ### reloading units
   sudo systemctl daemon-reload
   sudo systemctl reset-failed
-  ok_msg "Moonraker-obico Services removed!"
+  ok_msg "Obico Services removed!"
 }
 
 function remove_moonraker_obico_logs() {
@@ -361,7 +359,7 @@ function remove_legacy_moonraker_obico_logs() {
 function remove_moonraker_obico_dir() {
   [[ ! -d ${MOONRAKER_OBICO_DIR} ]] && return
 
-  status_msg "Removing Moonraker-obico directory ..."
+  status_msg "Removing Obico directory ..."
   rm -rf "${MOONRAKER_OBICO_DIR}"
   ok_msg "Directory removed!"
 }
@@ -380,7 +378,7 @@ function remove_moonraker_obico() {
   remove_moonraker_obico_dir
   remove_moonraker_obico_env
 
-  print_confirm "Moonraker-obico was successfully removed!"
+  print_confirm "Obico was successfully removed!"
   return
 }
 
@@ -394,7 +392,7 @@ function update_moonraker_obico() {
   if [[ ! -d ${MOONRAKER_OBICO_DIR} ]]; then
     clone_moonraker_obico "${MOONRAKER_OBICO_REPO}"
   else
-    status_msg "Updating Moonraker-obico ..."
+    status_msg "Updating Obico ..."
     cd "${MOONRAKER_OBICO_DIR}" && git pull
   fi
 

scripts/octoeverywhere.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/octoprint.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/pretty_gcode.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/rollback.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/switch_klipper_repo.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -77,10 +77,12 @@ function change_klipper_repo_menu() {
               error_msg "Invalid command!";;
           esac
         done
+        break
       else
         status_msg "Set custom Klipper repository to:\n       ● Repository: ${repos[${option}]}\n       ● Branch: ${branches[${option}]}"
         set_custom_klipper_repo "${repos[${option}]}" "${branches[${option}]}"
         ok_msg "This repo will now be used for new Klipper installations!\n"
+        break
       fi
 
     elif [[ ${option} =~ ${back} ]]; then

scripts/ui/advanced_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/ui/backup_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -25,7 +25,7 @@ function backup_ui() {
   echo -e "|                            |                          |"
   echo -e "| Klipper Webinterface:      | Other:                   |"
   echo -e "|  5) [Mainsail]             |  9) [Telegram Bot]       |"
-  echo -e "|  6) [Fluidd]               |                          |"
+  echo -e "|  6) [Fluidd]               | 10) [OctoEverywhere]     |"
   back_footer
 }
 
@@ -54,6 +54,8 @@ function backup_menu() {
         do_action "backup_octoprint" "backup_ui";;
       9)
         do_action "backup_telegram_bot" "backup_ui";;
+      10)
+        do_action "backup_octoeverywhere" "backup_ui";;
       B|b)
         clear; main_menu; break;;
       *)

scripts/ui/general_ui.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/ui/install_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -35,7 +35,7 @@ function install_ui() {
 }
 
 function install_menu() {
-  clear -x && sudo -v && clear -x # (re)cache sudo credentials so password prompt doesn't bork ui
+  clear -x && sudo true && clear -x # (re)cache sudo credentials so password prompt doesn't bork ui
   print_header
   install_ui
 

scripts/ui/main_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -57,7 +57,7 @@ function print_status() {
   elif [[ ${status} == "Incomplete!" ]]; then
     status="${yellow}${status}${white}"
   elif [[ ${status} == "Not linked!" ]]; then
-    ### "Not linked!" is only required for Moonraker-obico
+    ### "Not linked!" is only required for Obico for Klipper
     status="${yellow}${status}${white}"
   else
     status="${green}${status}${white}"

scripts/ui/remove_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/ui/settings_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/ui/update_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -41,7 +41,7 @@ function update_ui() {
 }
 
 function update_menu() {
-  clear -x && sudo -v && clear -x # (re)cache sudo credentials so password prompt doesn't bork ui
+  clear -x && sudo true && clear -x # (re)cache sudo credentials so password prompt doesn't bork ui
   do_action "" "update_ui"
   
   local action

scripts/upload_log.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/utilities.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #