Merge ad56b51e70 into 8e7d4db988

Signed-off-by: Dominik Willner <th33xitus@gmail.com>

.github/FUNDING.yml

@@ -9,4 +9,4 @@ community_bridge: # Replace with a single Community Bridge project-name e.g., cl
 liberapay: # Replace with a single Liberapay username
 issuehunt: # Replace with a single IssueHunt username
 otechie: # Replace with a single Otechie username
-custom: # Replace with up to 4 custom sponsorship URLs e.g., ['link1', 'link2']
+custom: https://paypal.me/dwillner0

.gitignore

@@ -1,3 +1,4 @@
+.idea
 .vscode
 .idea
 .pytest_cache

README.md

@@ -29,7 +29,7 @@
 ### 📋 Prerequisites
 KIAUH is a script that assists you in installing Klipper on a Linux operating system that has
 already been flashed to your Raspberry Pi's (or other SBC's) SD card. As a result, you must ensure 
-that you have a functional Linux system on hand. `Raspberry Pi OS Lite (32bit)` is a recommended Linux image 
+that you have a functional Linux system on hand. `Raspberry Pi OS Lite (either 32bit or 64bit)` is a recommended Linux image 
 if you are using a Raspberry Pi. The [official Raspberry Pi Imager](https://www.raspberrypi.com/software/) 
 is the simplest way to flash an image like this to an SD card.
 
@@ -39,7 +39,7 @@ select `Choose OS -> Raspberry Pi OS (other)`: \
   <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/rpi_imager1.png" alt="KIAUH logo" height="350">
 </p>
 
-* Then select `Raspberry Pi OS Lite (32bit)`:
+* Then select `Raspberry Pi OS Lite (32bit)` (or 64bit if you want to use that instead):
 <p align="center">
   <img src="https://raw.githubusercontent.com/dw-0/kiauh/master/resources/screenshots/rpi_imager2.png" alt="KIAUH logo" height="350">
 </p>
@@ -125,7 +125,7 @@ prompt and confirm by hitting ENTER.
 <tr>
 <th><img src="https://raw.githubusercontent.com/fluidd-core/fluidd/master/docs/assets/images/logo.svg" alt="Fluidd Logo" height="64"></th>
 <th><img src="https://avatars.githubusercontent.com/u/31575189?v=4" alt="jordanruthe avatar" height="64"></th>
-<th><img src="https://camo.githubusercontent.com/627be7fc67195b626b298af9b9677d7c58e698c67305e54324cffbe06130d4a4/68747470733a2f2f6f63746f7072696e742e6f72672f6173736574732f696d672f6c6f676f2e706e67" alt="OctoPrint Logo" height="64"></th>
+<th><img src="https://raw.githubusercontent.com/OctoPrint/OctoPrint/master/docs/images/octoprint-logo.png" alt="OctoPrint Logo" height="64"></th>
 </tr>
 <tr>
 <th>by <a href="https://github.com/fluidd-core">fluidd-core</a></th>

kiauh.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

kiauh/core/menus/base_menu.py

@@ -23,6 +23,7 @@ from kiauh.utils.constants import (
     COLOR_CYAN,
     RESET_FORMAT,
 )
+from kiauh.utils.logger import Logger
 
 
 def clear():
@@ -92,6 +93,8 @@ def print_back_help_footer():
 
 
 class BaseMenu(ABC):
+    NAVI_OPTIONS = {"quit": ["q"], "back": ["b"], "back_help": ["b", "h"]}
+
     def __init__(
         self,
         options: Dict[int, Any],
@@ -130,29 +133,20 @@ class BaseMenu(ABC):
         while True:
             choice = input(f"{COLOR_CYAN}###### Perform action: {RESET_FORMAT}")
 
-            error_msg = (
-                f"{COLOR_RED}Invalid input.{RESET_FORMAT}"
-                if choice.isalpha()
-                else f"{COLOR_RED}Invalid input. Select a number between {min(self.options)} and {max(self.options)}.{RESET_FORMAT}"
-            )
-
             if choice.isdigit() and 0 <= int(choice) < len(self.options):
                 return choice
-            elif choice.isalpha():
-                allowed_input = {
-                    "quit": ["q"],
-                    "back": ["b"],
-                    "back_help": ["b", "h"],
-                }
-                if (
-                    self.footer_type in allowed_input
-                    and choice.lower() in allowed_input[self.footer_type]
-                ):
-                    return choice
-                else:
-                    print(error_msg)
+            elif choice.isalpha() and (
+                self.footer_type in self.NAVI_OPTIONS
+                and choice.lower() in self.NAVI_OPTIONS[self.footer_type]
+            ):
+                return choice
             else:
-                print(error_msg)
+                error_msg = (
+                    "Invalid input!"
+                    if choice.isalpha() or (not self.options and len(self.options) < 1)
+                    else f"Invalid input! Select a number between {min(self.options)} and {max(self.options)}."
+                )
+                Logger.print_error(error_msg, False)
 
     def start(self):
         while True:
@@ -160,7 +154,7 @@ class BaseMenu(ABC):
             choice = self.handle_user_input()
 
             if choice == "q":
-                print(f"{COLOR_GREEN}###### Happy printing!{RESET_FORMAT}")
+                Logger.print_ok("###### Happy printing!", False)
                 sys.exit(0)
             elif choice == "b":
                 return
@@ -175,7 +169,7 @@ class BaseMenu(ABC):
         if isinstance(option, type) and issubclass(option, BaseMenu):
             self.navigate_to_submenu(option)
         elif callable(option):
-            option()
+            option(opt_index=choice)
         elif option is None:
             raise NotImplementedError(f"No implementation for option {choice}")
         else:

kiauh/core/menus/install_menu.py

@@ -19,6 +19,7 @@ from kiauh.modules.moonraker import moonraker_setup
 from kiauh.utils.constants import COLOR_GREEN, RESET_FORMAT
 
 
+# noinspection PyUnusedLocal
 # noinspection PyMethodMayBeStatic
 class InstallMenu(BaseMenu):
     def __init__(self):
@@ -63,35 +64,35 @@ class InstallMenu(BaseMenu):
         )[1:]
         print(menu, end="")
 
-    def install_klipper(self):
+    def install_klipper(self, **kwargs):
         klipper_setup.install_klipper()
 
-    def install_moonraker(self):
+    def install_moonraker(self, **kwargs):
         moonraker_setup.install_moonraker()
 
-    def install_mainsail(self):
+    def install_mainsail(self, **kwargs):
         mainsail_setup.install_mainsail()
 
-    def install_fluidd(self):
+    def install_fluidd(self, **kwargs):
         print("install_fluidd")
 
-    def install_klipperscreen(self):
+    def install_klipperscreen(self, **kwargs):
         print("install_klipperscreen")
 
-    def install_pretty_gcode(self):
+    def install_pretty_gcode(self, **kwargs):
         print("install_pretty_gcode")
 
-    def install_telegram_bot(self):
+    def install_telegram_bot(self, **kwargs):
         print("install_telegram_bot")
 
-    def install_obico(self):
+    def install_obico(self, **kwargs):
         print("install_obico")
 
-    def install_octoeverywhere(self):
+    def install_octoeverywhere(self, **kwargs):
         print("install_octoeverywhere")
 
-    def install_mobileraker(self):
+    def install_mobileraker(self, **kwargs):
         print("install_mobileraker")
 
-    def install_crowsnest(self):
+    def install_crowsnest(self, **kwargs):
         print("install_crowsnest")

kiauh/core/menus/main_menu.py

@@ -19,6 +19,7 @@ from kiauh.core.menus.remove_menu import RemoveMenu
 from kiauh.core.menus.settings_menu import SettingsMenu
 from kiauh.core.menus.update_menu import UpdateMenu
 from kiauh.modules.klipper.klipper_utils import get_klipper_status
+from kiauh.modules.log_uploads.menus.log_upload_menu import LogUploadMenu
 from kiauh.modules.mainsail.mainsail_utils import get_mainsail_status
 from kiauh.modules.moonraker.moonraker_utils import get_moonraker_status
 from kiauh.utils.constants import (
@@ -36,7 +37,7 @@ class MainMenu(BaseMenu):
         super().__init__(
             header=True,
             options={
-                0: None,
+                0: LogUploadMenu,
                 1: InstallMenu,
                 2: UpdateMenu,
                 3: RemoveMenu,

kiauh/core/menus/remove_menu.py

@@ -19,6 +19,7 @@ from kiauh.modules.moonraker.menus.moonraker_remove_menu import MoonrakerRemoveM
 from kiauh.utils.constants import COLOR_RED, RESET_FORMAT
 
 
+# noinspection PyUnusedLocal
 # noinspection PyMethodMayBeStatic
 class RemoveMenu(BaseMenu):
     def __init__(self):
@@ -69,35 +70,35 @@ class RemoveMenu(BaseMenu):
         )[1:]
         print(menu, end="")
 
-    def remove_fluidd(self):
+    def remove_fluidd(self, **kwargs):
         print("remove_fluidd")
 
-    def remove_fluidd_config(self):
+    def remove_fluidd_config(self, **kwargs):
         print("remove_fluidd_config")
 
-    def remove_klipperscreen(self):
+    def remove_klipperscreen(self, **kwargs):
         print("remove_klipperscreen")
 
-    def remove_crowsnest(self):
+    def remove_crowsnest(self, **kwargs):
         print("remove_crowsnest")
 
-    def remove_mjpgstreamer(self):
+    def remove_mjpgstreamer(self, **kwargs):
         print("remove_mjpgstreamer")
 
-    def remove_pretty_gcode(self):
+    def remove_pretty_gcode(self, **kwargs):
         print("remove_pretty_gcode")
 
-    def remove_telegram_bot(self):
+    def remove_telegram_bot(self, **kwargs):
         print("remove_telegram_bot")
 
-    def remove_obico(self):
+    def remove_obico(self, **kwargs):
         print("remove_obico")
 
-    def remove_octoeverywhere(self):
+    def remove_octoeverywhere(self, **kwargs):
         print("remove_octoeverywhere")
 
-    def remove_mobileraker(self):
+    def remove_mobileraker(self, **kwargs):
         print("remove_mobileraker")
 
-    def remove_nginx(self):
+    def remove_nginx(self, **kwargs):
         print("remove_nginx")

kiauh/core/menus/update_menu.py

@@ -27,6 +27,7 @@ from kiauh.modules.moonraker.moonraker_utils import get_moonraker_status
 from kiauh.utils.constants import COLOR_GREEN, RESET_FORMAT, COLOR_YELLOW, COLOR_WHITE
 
 
+# noinspection PyUnusedLocal
 # noinspection PyMethodMayBeStatic
 class UpdateMenu(BaseMenu):
     def __init__(self):
@@ -93,43 +94,43 @@ class UpdateMenu(BaseMenu):
         )[1:]
         print(menu, end="")
 
-    def update_all(self):
+    def update_all(self, **kwargs):
         print("update_all")
 
-    def update_klipper(self):
+    def update_klipper(self, **kwargs):
         update_klipper()
 
-    def update_moonraker(self):
+    def update_moonraker(self, **kwargs):
         update_moonraker()
 
-    def update_mainsail(self):
+    def update_mainsail(self, **kwargs):
         update_mainsail()
 
-    def update_fluidd(self):
+    def update_fluidd(self, **kwargs):
         print("update_fluidd")
 
-    def update_klipperscreen(self):
+    def update_klipperscreen(self, **kwargs):
         print("update_klipperscreen")
 
-    def update_pgc_for_klipper(self):
+    def update_pgc_for_klipper(self, **kwargs):
         print("update_pgc_for_klipper")
 
-    def update_telegram_bot(self):
+    def update_telegram_bot(self, **kwargs):
         print("update_telegram_bot")
 
-    def update_moonraker_obico(self):
+    def update_moonraker_obico(self, **kwargs):
         print("update_moonraker_obico")
 
-    def update_octoeverywhere(self):
+    def update_octoeverywhere(self, **kwargs):
         print("update_octoeverywhere")
 
-    def update_mobileraker(self):
+    def update_mobileraker(self, **kwargs):
         print("update_mobileraker")
 
-    def update_crowsnest(self):
+    def update_crowsnest(self, **kwargs):
         print("update_crowsnest")
 
-    def upgrade_system_packages(self):
+    def upgrade_system_packages(self, **kwargs):
         print("upgrade_system_packages")
 
     def fetch_update_status(self):

kiauh/modules/klipper/menus/klipper_remove_menu.py

@@ -18,6 +18,7 @@ from kiauh.modules.moonraker import moonraker_remove
 from kiauh.utils.constants import RESET_FORMAT, COLOR_RED, COLOR_CYAN
 
 
+# noinspection PyUnusedLocal
 class KlipperRemoveMenu(BaseMenu):
     def __init__(self):
         super().__init__(
@@ -67,25 +68,25 @@ class KlipperRemoveMenu(BaseMenu):
         )[1:]
         print(menu, end="")
 
-    def toggle_all(self) -> None:
+    def toggle_all(self, **kwargs) -> None:
         self.remove_klipper_service = True
         self.remove_klipper_dir = True
         self.remove_klipper_env = True
         self.delete_klipper_logs = True
 
-    def toggle_remove_klipper_service(self) -> None:
+    def toggle_remove_klipper_service(self, **kwargs) -> None:
         self.remove_klipper_service = not self.remove_klipper_service
 
-    def toggle_remove_klipper_dir(self) -> None:
+    def toggle_remove_klipper_dir(self, **kwargs) -> None:
         self.remove_klipper_dir = not self.remove_klipper_dir
 
-    def toggle_remove_klipper_env(self) -> None:
+    def toggle_remove_klipper_env(self, **kwargs) -> None:
         self.remove_klipper_env = not self.remove_klipper_env
 
-    def toggle_delete_klipper_logs(self) -> None:
+    def toggle_delete_klipper_logs(self, **kwargs) -> None:
         self.delete_klipper_logs = not self.delete_klipper_logs
 
-    def run_removal_process(self) -> None:
+    def run_removal_process(self, **kwargs) -> None:
         if (
             not self.remove_klipper_service
             and not self.remove_klipper_dir

kiauh/modules/log_uploads/__init__.py

@@ -0,0 +1,16 @@
+#!/usr/bin/env python3
+
+# ======================================================================= #
+#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from pathlib import Path
+from typing import Dict, Union, Literal
+
+FileKey = Literal["filepath", "display_name"]
+LogFile = Dict[FileKey, Union[str, Path]]

kiauh/modules/log_uploads/log_upload_utils.py

@@ -0,0 +1,57 @@
+#!/usr/bin/env python3
+
+# ======================================================================= #
+#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from typing import List
+from pathlib import Path
+
+import urllib.request
+
+from kiauh.core.instance_manager.instance_manager import InstanceManager
+from kiauh.modules.klipper.klipper import Klipper
+from kiauh.modules.log_uploads import LogFile
+from kiauh.utils.logger import Logger
+
+
+def get_logfile_list() -> List[LogFile]:
+    cm = InstanceManager(Klipper)
+    log_dirs: List[Path] = [instance.log_dir for instance in cm.instances]
+
+    logfiles: List[LogFile] = []
+    for _dir in log_dirs:
+        for f in _dir.iterdir():
+            logfiles.append({"filepath": f, "display_name": get_display_name(f)})
+
+    return logfiles
+
+
+def get_display_name(filepath: Path) -> str:
+    printer = " ".join(filepath.parts[-3].split("_")[:-1])
+    name = filepath.name
+
+    return f"{printer}: {name}"
+
+
+def upload_logfile(logfile: LogFile) -> None:
+    file = logfile.get("filepath")
+    name = logfile.get("display_name")
+    Logger.print_status(f"Uploading the following logfile from {name} ...")
+
+    with open(file, "rb") as f:
+        headers = {"x-random": ""}
+        req = urllib.request.Request("http://paste.c-net.org/", headers=headers, data=f)
+        try:
+            response = urllib.request.urlopen(req)
+            link = response.read().decode("utf-8")
+            Logger.print_ok("Upload successfull! Access it via the following link:")
+            Logger.print_ok(f">>>> {link}", False)
+        except Exception as e:
+            Logger.print_error(f"Uploading logfile failed!")
+            Logger.print_error(str(e))

kiauh/modules/log_uploads/menus/log_upload_menu.py

@@ -0,0 +1,54 @@
+#!/usr/bin/env python3
+
+# ======================================================================= #
+#  Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>        #
+#                                                                         #
+#  This file is part of KIAUH - Klipper Installation And Update Helper    #
+#  https://github.com/dw-0/kiauh                                          #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+import textwrap
+
+from kiauh.core.menus import BACK_FOOTER
+from kiauh.core.menus.base_menu import BaseMenu
+from kiauh.modules.log_uploads.log_upload_utils import upload_logfile
+from kiauh.modules.log_uploads.log_upload_utils import get_logfile_list
+from kiauh.utils.constants import RESET_FORMAT, COLOR_YELLOW
+
+
+# noinspection PyMethodMayBeStatic
+class LogUploadMenu(BaseMenu):
+    def __init__(self):
+        self.logfile_list = get_logfile_list()
+        options = {index: self.upload for index in range(len(self.logfile_list))}
+        super().__init__(
+            header=True,
+            options=options,
+            footer_type=BACK_FOOTER,
+        )
+
+    def print_menu(self):
+        header = " [ Log Upload ] "
+        color = COLOR_YELLOW
+        count = 62 - len(color) - len(RESET_FORMAT)
+        menu = textwrap.dedent(
+            f"""
+            /=======================================================\\
+            | {color}{header:~^{count}}{RESET_FORMAT} |
+            |-------------------------------------------------------|
+            | You can select the following logfiles for uploading:  |
+            |                                                       |
+            """
+        )[1:]
+
+        logfile_list = get_logfile_list()
+        for logfile in enumerate(logfile_list):
+            line = f"{logfile[0]}) {logfile[1].get('display_name')}"
+            menu += f"| {line:<54}|\n"
+
+        print(menu, end="")
+
+    def upload(self, **kwargs):
+        upload_logfile(self.logfile_list[kwargs.get("opt_index")])

kiauh/modules/mainsail/mainsail_setup.py

@@ -90,10 +90,13 @@ def install_mainsail() -> None:
         question = "Download the recommended macros?"
         install_ms_config = get_confirm(question, allow_go_back=False)
 
+    # if a default port is configured in the kiauh.cfg, we use that for the port
+    # otherwise we default to port 80, but show the user a dialog to confirm/change that port
     cm = ConfigManager(cfg_file=KIAUH_CFG)
     default_port = cm.get_value("mainsail", "default_port")
-    mainsail_port = default_port if default_port else "80"
-    if not default_port:
+    is_valid_port = default_port and default_port.isdigit()
+    mainsail_port = default_port if is_valid_port else "80"
+    if not is_valid_port:
         print_mainsail_port_select_dialog(mainsail_port)
         mainsail_port = get_number_input(
             "Configure Mainsail for port",

kiauh/modules/mainsail/menus/mainsail_remove_menu.py

@@ -17,6 +17,7 @@ from kiauh.modules.mainsail import mainsail_remove
 from kiauh.utils.constants import RESET_FORMAT, COLOR_RED, COLOR_CYAN
 
 
+# noinspection PyUnusedLocal
 class MainsailRemoveMenu(BaseMenu):
     def __init__(self):
         super().__init__(
@@ -72,29 +73,29 @@ class MainsailRemoveMenu(BaseMenu):
         )[1:]
         print(menu, end="")
 
-    def toggle_all(self) -> None:
+    def toggle_all(self, **kwargs) -> None:
         self.remove_mainsail = True
         self.remove_ms_config = True
         self.backup_config_json = True
         self.remove_updater_section = True
         self.remove_printer_cfg_include = True
 
-    def toggle_remove_mainsail(self) -> None:
+    def toggle_remove_mainsail(self, **kwargs) -> None:
         self.remove_mainsail = not self.remove_mainsail
 
-    def toggle_remove_ms_config(self) -> None:
+    def toggle_remove_ms_config(self, **kwargs) -> None:
         self.remove_ms_config = not self.remove_ms_config
 
-    def toggle_backup_config_json(self) -> None:
+    def toggle_backup_config_json(self, **kwargs) -> None:
         self.backup_config_json = not self.backup_config_json
 
-    def toggle_remove_updater_section(self) -> None:
+    def toggle_remove_updater_section(self, **kwargs) -> None:
         self.remove_updater_section = not self.remove_updater_section
 
-    def toggle_remove_printer_cfg_include(self) -> None:
+    def toggle_remove_printer_cfg_include(self, **kwargs) -> None:
         self.remove_printer_cfg_include = not self.remove_printer_cfg_include
 
-    def run_removal_process(self) -> None:
+    def run_removal_process(self, **kwargs) -> None:
         if (
             not self.remove_mainsail
             and not self.remove_ms_config

kiauh/modules/moonraker/menus/moonraker_remove_menu.py

@@ -17,6 +17,7 @@ from kiauh.modules.moonraker import moonraker_remove
 from kiauh.utils.constants import RESET_FORMAT, COLOR_RED, COLOR_CYAN
 
 
+# noinspection PyUnusedLocal
 class MoonrakerRemoveMenu(BaseMenu):
     def __init__(self):
         super().__init__(
@@ -70,29 +71,29 @@ class MoonrakerRemoveMenu(BaseMenu):
         )[1:]
         print(menu, end="")
 
-    def toggle_all(self) -> None:
+    def toggle_all(self, **kwargs) -> None:
         self.remove_moonraker_service = True
         self.remove_moonraker_dir = True
         self.remove_moonraker_env = True
         self.remove_moonraker_polkit = True
         self.delete_moonraker_logs = True
 
-    def toggle_remove_moonraker_service(self) -> None:
+    def toggle_remove_moonraker_service(self, **kwargs) -> None:
         self.remove_moonraker_service = not self.remove_moonraker_service
 
-    def toggle_remove_moonraker_dir(self) -> None:
+    def toggle_remove_moonraker_dir(self, **kwargs) -> None:
         self.remove_moonraker_dir = not self.remove_moonraker_dir
 
-    def toggle_remove_moonraker_env(self) -> None:
+    def toggle_remove_moonraker_env(self, **kwargs) -> None:
         self.remove_moonraker_env = not self.remove_moonraker_env
 
-    def toggle_remove_moonraker_polkit(self) -> None:
+    def toggle_remove_moonraker_polkit(self, **kwargs) -> None:
         self.remove_moonraker_polkit = not self.remove_moonraker_polkit
 
-    def toggle_delete_moonraker_logs(self) -> None:
+    def toggle_delete_moonraker_logs(self, **kwargs) -> None:
         self.delete_moonraker_logs = not self.delete_moonraker_logs
 
-    def run_removal_process(self) -> None:
+    def run_removal_process(self, **kwargs) -> None:
         if (
             not self.remove_moonraker_service
             and not self.remove_moonraker_dir

resources/example.printer.cfg

@@ -1,7 +1,11 @@
 [mcu]
 serial: /dev/serial/by-id/<your-mcu-id>
 
+[virtual_sdcard]
+path: %GCODES_DIR%
+on_error_gcode: CANCEL_PRINT
+
 [printer]
 kinematics: none
 max_velocity: 1000
-max_accel: 1000
+max_accel: 1000

scripts/backup.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -33,23 +33,25 @@ function backup_before_update() {
 
 function backup_config_dir() {
   check_for_backup_dir
-  local current_date instance_names config_pathes
+  local current_date config_pathes
 
   config_pathes=$(get_config_folders)
-  readarray -t -d" " instance_names < <(get_multi_instance_names)
 
   if [[ -n "${config_pathes}" ]]; then
     current_date=$(get_date)
     status_msg "Timestamp: ${current_date}"
 
-    local i=0 folder
+    local i=0 folder folder_name target_dir
     for folder in ${config_pathes}; do
-      local folder_name="${instance_names[${i}]}"
       status_msg "Create backup of ${folder} ..."
-      mkdir -p "${BACKUP_DIR}/configs/${current_date}/${folder_name}"
-      cp -r "${folder}" "${_}"
-      ok_msg "Backup created in:\n${BACKUP_DIR}/configs/${current_date}/${folder_name}"
+
+      folder_name=$(echo "${folder}" | rev | cut -d"/" -f2 | rev)
+      target_dir="${BACKUP_DIR}/configs/${current_date}/${folder_name}"
+      mkdir -p "${target_dir}"
+      cp -r "${folder}" "${target_dir}"
       i=$(( i + 1 ))
+
+      ok_msg "Backup created in:\n${target_dir}"
     done
   else
     ok_msg "No config directory found! Skipping backup ..."
@@ -61,20 +63,22 @@ function backup_moonraker_database() {
   local current_date db_pathes
 
   db_pathes=$(get_instance_folder_path "database")
-  readarray -t -d" " instance_names < <(get_multi_instance_names)
 
   if [[ -n ${db_pathes} ]]; then
     current_date=$(get_date)
     status_msg "Timestamp: ${current_date}"
 
-    local i=0 database
+    local i=0 database folder_name target_dir
     for database in ${db_pathes}; do
-      local folder_name="${instance_names[${i}]}"
       status_msg "Create backup of ${database} ..."
-      mkdir -p "${BACKUP_DIR}/moonraker_databases/${current_date}/${folder_name}"
-      cp -r "${database}" "${_}"
-      ok_msg "Backup created in:\n${BACKUP_DIR}/moonraker_databases/${current_date}/${folder_name}"
+
+      folder_name=$(echo "${database}" | rev | cut -d"/" -f2 | rev)
+      target_dir="${BACKUP_DIR}/moonraker_databases/${current_date}/${folder_name}"
+      mkdir -p "${target_dir}"
+      cp -r "${database}" "${target_dir}"
       i=$(( i + 1 ))
+
+      ok_msg "Backup created in:\n${target_dir}"
     done
   else
     print_error "No Moonraker database found! Skipping backup ..."
@@ -191,3 +195,19 @@ function backup_telegram_bot() {
     print_error "Can't back up MoonrakerTelegramBot directory!\n Not found!"
   fi
 }
+
+function backup_octoeverywhere() {
+  local current_date
+
+  if [[ -d ${OCTOEVERYWHERE_DIR} ]] ; then
+    status_msg "Creating OctoEverywhere backup ..."
+    check_for_backup_dir
+    current_date=$(get_date)
+    status_msg "Timestamp: ${current_date}"
+    mkdir -p "${BACKUP_DIR}/OctoEverywhere-backups/${current_date}"
+    cp -r "${OCTOEVERYWHERE_DIR}" "${_}" && cp -r "${OCTOEVERYWHERE_ENV}" "${_}"
+    print_confirm "OctoEverywhere backup complete!"
+  else
+    print_error "Can't back up OctoEverywhere directory!\n Not found!"
+  fi
+}

scripts/crowsnest.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/flash_klipper.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -52,16 +52,57 @@ function init_flash_process() {
     esac
   done
 
-  ### step 2: select how the mcu is connected to the host
+  ### step 2: select how the mcu is flashed (flash/serialflash)
+  select_flash_command
+
+  ### step 3: select how the mcu is connected to the host
   select_mcu_connection
 
-  ### step 3: select which detected mcu should be flashed
+  ### step 4: select which detected mcu should be flashed
   select_mcu_id "${method}"
 }
 
 #================================================#
 #=================== STEP 2 =====================#
 #================================================#
+function select_flash_command() {
+  unset flash_command
+
+  top_border
+  echo -e "| How to flash MCU?                                     |"
+  echo -e "| 1) make flash (default)                               |"
+  echo -e "| 2) make serialflash (stm32flash)                      |"
+  blank_line
+  back_help_footer
+
+  local choice
+  while true; do
+    read -p "${cyan}###### Flashing command:${white} " -i "1" -e choice
+    case "${choice}" in
+      1)
+        select_msg "Selected 'make flash' command"
+        flash_command="flash"
+        break;;
+      2)
+        select_msg "Selected 'make serialflash' command"
+        flash_command="serialflash"
+        break;;
+      B|b)
+        advanced_menu
+        break;;
+      H|h)
+        clear && print_header
+        show_mcu_flash_command_help
+        break;;
+      *)
+        error_msg "Invalid command!";;
+    esac
+  done
+}
+
+#================================================#
+#=================== STEP 3 =====================#
+#================================================#
 function select_mcu_connection() {
   top_border
   echo -e "| ${yellow}Make sure that the controller board is connected now!${white} |"
@@ -112,7 +153,6 @@ function print_detected_mcu_to_screen() {
   fi
 
   for mcu in "${mcu_list[@]}"; do
-    mcu=$(echo "${mcu}" | rev | cut -d"/" -f1 | rev)
     echo -e " ● MCU #${i}: ${cyan}${mcu}${white}"
     i=$(( i + 1 ))
   done
@@ -120,7 +160,7 @@ function print_detected_mcu_to_screen() {
 }
 
 #================================================#
-#=================== STEP 3 =====================#
+#=================== STEP 4 =====================#
 #================================================#
 function select_mcu_id() {
   local i=0 sel_index=0 method=${1}
@@ -195,7 +235,7 @@ function start_flash_mcu() {
   local device=${1}
   do_action_service "stop" "klipper"
 
-  if make flash FLASH_DEVICE="${device}"; then
+  if make ${flash_command} FLASH_DEVICE="${device}"; then
     ok_msg "Flashing successfull!"
   else
     warn_msg "Flashing failed!"
@@ -387,6 +427,36 @@ function show_flash_method_help() {
   done
 }
 
+function show_mcu_flash_command_help() {
+  top_border
+  echo -e "|     ~~~~~~~~ < ? > Help: Flash MCU < ? > ~~~~~~~~     |"
+  hr
+  echo -e "| ${cyan}make flash:${white}                                           |"
+  echo -e "| The default command to flash controller board, it     |"
+  echo -e "| will detect selected microcontroller and use suitable |"
+  echo -e "| tool for flashing it.                                 |"
+  blank_line
+  echo -e "| ${cyan}make serialflash:${white}                                     |"
+  echo -e "| Special command to flash STM32 microcontrollers in    |"
+  echo -e "| DFU mode but connected via serial. stm32flash command |"
+  echo -e "| will be used internally.                              |"
+  blank_line
+  back_footer
+
+  local choice
+  while true; do
+    read -p "${cyan}###### Please select:${white} " choice
+    case "${choice}" in
+      B|b)
+        clear && print_header
+        select_flash_command
+        break;;
+      *)
+        error_msg "Invalid command!";;
+    esac
+  done
+}
+
 function show_mcu_connection_help() {
   top_border
   echo -e "|     ~~~~~~~~ < ? > Help: Flash MCU < ? > ~~~~~~~~     |"

scripts/fluidd.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/gcode_shell_command.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/globals.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/klipper.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -244,6 +244,7 @@ function run_klipper_setup() {
 
   ### finalizing the setup with writing instance names to the kiauh.ini
   set_multi_instance_names
+  mask_disrupting_services
 
   print_confirm "${confirm}" && return
 }
@@ -333,6 +334,7 @@ function create_klipper_service() {
 
   local printer_data
   local cfg_dir
+  local gcodes_dir
   local cfg
   local log
   local klippy_serial
@@ -345,6 +347,7 @@ function create_klipper_service() {
 
   printer_data="${HOME}/${instance_name}_data"
   cfg_dir="${printer_data}/config"
+  gcodes_dir="${printer_data}/gcodes"
   cfg="${cfg_dir}/printer.cfg"
   log="${printer_data}/logs/klippy.log"
   klippy_serial="${printer_data}/comms/klippy.serial"
@@ -375,18 +378,20 @@ function create_klipper_service() {
   fi
 
   if [[ ! -f ${cfg} ]]; then
-    write_example_printer_cfg "${cfg}"
+    write_example_printer_cfg "${cfg}" "${gcodes_dir}"
   fi
 }
 
 function write_example_printer_cfg() {
   local cfg=${1}
+  local gcodes_dir=${2}
   local cfg_template
 
   cfg_template="${KIAUH_SRCDIR}/resources/example.printer.cfg"
 
   status_msg "Creating minimal example printer.cfg ..."
   if cp "${cfg_template}" "${cfg}"; then
+    sed -i "s|%GCODES_DIR%|${gcodes_dir}|" "${cfg}"
     ok_msg "Minimal example printer.cfg created!"
   else
     error_msg "Couldn't create minimal example printer.cfg!"
@@ -625,3 +630,34 @@ function get_klipper_python_ver() {
   version=$("${KLIPPY_ENV}"/bin/python --version 2>&1 | cut -d" " -f2 | cut -d"." -f1)
   echo "${version}"
 }
+
+function mask_disrupting_services() {
+  local brltty="false"
+  local brltty_udev="false"
+  local modem_manager="false"
+
+  [[ $(dpkg -s brltty  2>/dev/null | grep "Status") = *\ installed ]] && brltty="true"
+  [[ $(dpkg -s brltty-udev  2>/dev/null | grep "Status") = *\ installed ]] && brltty_udev="true"
+  [[ $(dpkg -s ModemManager  2>/dev/null | grep "Status") = *\ installed ]] && modem_manager="true"
+
+  status_msg "Installed brltty package detected, masking brltty service ..."
+  if [[ ${brltty} == "true" ]]; then
+    sudo systemctl stop brltty
+    sudo systemctl mask brltty
+  fi
+  ok_msg "brltty service masked!"
+
+  status_msg "Installed brltty-udev package detected, masking brltty-udev service ..."
+  if [[ ${brltty_udev} == "true" ]]; then
+    sudo systemctl stop brltty-udev
+    sudo systemctl mask brltty-udev
+  fi
+  ok_msg "brltty-udev service masked!"
+
+  status_msg "Installed ModemManager package detected, masking ModemManager service ..."
+  if [[ ${modem_manager} == "true" ]]; then
+    sudo systemctl stop ModemManager
+    sudo systemctl mask ModemManager
+  fi
+  ok_msg "ModemManager service masked!"
+}

scripts/klipperscreen.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -119,6 +119,8 @@ function update_klipperscreen() {
   old_md5=$(md5sum "${KLIPPERSCREEN_DIR}/scripts/KlipperScreen-requirements.txt" | cut -d " " -f1)
 
   do_action_service "stop" "KlipperScreen"
+  backup_before_update "klipperscreen"
+
   cd "${KLIPPERSCREEN_DIR}"
   git pull origin master -q && ok_msg "Fetch successfull!"
   git checkout -f master && ok_msg "Checkout successfull"

scripts/mainsail.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/mjpg-streamer.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/mobileraker.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/moonraker-telegram-bot.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/moonraker.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/nginx.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/obico.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -63,7 +63,7 @@ function obico_server_url_prompt() {
 }
 
 function moonraker_obico_setup_dialog() {
-  status_msg "Initializing Moonraker-obico installation ..."
+  status_msg "Initializing Obico installation ..."
 
   local moonraker_count
   local moonraker_names
@@ -73,7 +73,7 @@ function moonraker_obico_setup_dialog() {
   if (( moonraker_count == 0 )); then
     ### return early if moonraker is not installed
     local error="Moonraker not installed! Please install Moonraker first!"
-    log_error "Moonraker-obico setup started without Moonraker being installed. Aborting setup."
+    log_error "Obico setup started without Moonraker being installed. Aborting setup."
     print_error "${error}" && return
   elif (( moonraker_count > 1 )); then
     # moonraker_names is valid only in case of multi-instance
@@ -90,10 +90,10 @@ function moonraker_obico_setup_dialog() {
   if (( allowed_moonraker_obico_count == 0 && moonraker_count > 0 )) && [[ $(get_moonraker_obico_status) != "Not linked!" ]]; then
     local yn
     while true; do
-      echo "${yellow}Obico for Klipper is already installed.${white}"
+      echo "${yellow}Obico is already installed.${white}"
       echo "It is safe to run the install again to repair any issues."
       echo ""
-      local question="Do you want to reinstall Obico for Klipper?"
+      local question="Do you want to reinstall Obico?"
       read -p "${cyan}###### ${question} (Y/n):${white} " yn
       case "${yn}" in
         Y|y|Yes|yes|"")
@@ -101,7 +101,7 @@ function moonraker_obico_setup_dialog() {
           break;;
         N|n|No|no)
           select_msg "No"
-          abort_msg "Exiting Obico for Klipper installation...\n"
+          abort_msg "Exiting Obico installation...\n"
           return;;
         *)
           error_msg "Invalid Input!";;
@@ -126,31 +126,30 @@ function moonraker_obico_setup_dialog() {
       done
       blank_line
       if (( existing_moonraker_obico_count > 0 )); then
-        printf "|${green}%-55s${white}|\n" " ${existing_moonraker_obico_count} Moonraker-obico instances already installed!"
+        printf "|${green}%-55s${white}|\n" " ${existing_moonraker_obico_count} Obico instances already installed!"
         for svc in ${moonraker_obico_services}; do
           printf "|${cyan}%-57s${white}|\n" " ● moonraker-obco-$(get_instance_name "${svc}")"
         done
       fi
       blank_line
-      echo -e "| The setup will apply the same names to                |"
-      echo -e "| Moonraker-obico!                                      |"
+      echo -e "| The setup will apply the same names to Obico!         |"
       blank_line
-      echo -e "| Please select the number of Moonraker-obico instances |"
-      echo -e "| to install. Usually one Moonraker-obico instance per  |"
+      echo -e "| Please select the number of Obico instances           |"
+      echo -e "| to install. Usually one Obico instance per            |"
       echo -e "| Moonraker instance is required, but you may not       |"
-      echo -e "| install more Moonraker-obico instances than available |"
+      echo -e "| install more Obico instances than available           |"
       echo -e "| Moonraker instances.                                  |"
       bottom_border
 
       ### ask for amount of instances
       local re="^[1-9][0-9]*$"
       while [[ ! ${new_moonraker_obico_count} =~ ${re} || ${new_moonraker_obico_count} -gt ${allowed_moonraker_obico_count} ]]; do
-        read -p "${cyan}###### Number of new Moonraker-obico instances to set up:${white} " -i "${allowed_moonraker_obico_count}" -e new_moonraker_obico_count
+        read -p "${cyan}###### Number of new Obico instances to set up:${white} " -i "${allowed_moonraker_obico_count}" -e new_moonraker_obico_count
         ### break if input is valid
         [[ ${new_moonraker_obico_count} =~ ${re} && ${new_moonraker_obico_count} -le ${allowed_moonraker_obico_count} ]] && break
         ### conditional error messages
         [[ ! ${new_moonraker_obico_count} =~ ${re} ]] && error_msg "Input not a number"
-        (( new_moonraker_obico_count > allowed_moonraker_obico_count )) && error_msg "Number of Moonraker-obico instances larger than installed Moonraker instances"
+        (( new_moonraker_obico_count > allowed_moonraker_obico_count )) && error_msg "Number of Obico instances larger than installed Moonraker instances"
       done && select_msg "${new_moonraker_obico_count}"
     else
       log_error "Internal error. moonraker_count of '${moonraker_count}' not equal or grather than one!"
@@ -160,8 +159,8 @@ function moonraker_obico_setup_dialog() {
     ### Step 2: Confirm instance amount
     local yn
     while true; do
-      (( new_moonraker_obico_count == 1 )) && local question="Install Moonraker-obico?"
-      (( new_moonraker_obico_count > 1 )) && local question="Install ${new_moonraker_obico_count} Moonraker-obico instances?"
+      (( new_moonraker_obico_count == 1 )) && local question="Install Obico?"
+      (( new_moonraker_obico_count > 1 )) && local question="Install ${new_moonraker_obico_count} Obico instances?"
       read -p "${cyan}###### ${question} (Y/n):${white} " yn
       case "${yn}" in
         Y|y|Yes|yes|"")
@@ -169,7 +168,7 @@ function moonraker_obico_setup_dialog() {
           break;;
         N|n|No|no)
           select_msg "No"
-          abort_msg "Exiting Moonraker-obico setup ...\n"
+          abort_msg "Exiting Obico setup ...\n"
           return;;
         *)
           error_msg "Invalid Input!";;
@@ -191,8 +190,8 @@ function moonraker_obico_setup_dialog() {
       fi
     done
 
-    (( new_moonraker_obico_count > 1 )) && status_msg "Installing ${new_moonraker_obico_count} Moonraker-obico instances ..."
-    (( new_moonraker_obico_count == 1 )) && status_msg "Installing Moonraker-obico ..."
+    (( new_moonraker_obico_count > 1 )) && status_msg "Installing ${new_moonraker_obico_count} Obico instances ..."
+    (( new_moonraker_obico_count == 1 )) && status_msg "Installing Obico ..."
 
     ### Step 5: Clone the moonraker-obico repo
     clone_moonraker_obico "${MOONRAKER_OBICO_REPO}"
@@ -244,17 +243,16 @@ function moonraker_obico_setup_dialog() {
   if (( ${#not_linked_instances[@]} > 0 )); then
     top_border
     if (( moonraker_count == 1 )); then
-      printf "|${green}%-55s${white}|\n" " Moonraker-obico not linked to the server!"
+      printf "|${green}%-55s${white}|\n" " Obico not linked to the server!"
     else
-      printf "|${green}%-55s${white}|\n" " ${#not_linked_instances[@]} Moonraker-obico instances not linked to the server!"
+      printf "|${green}%-55s${white}|\n" " ${#not_linked_instances[@]} Obico instances not linked to the server!"
       for i in "${not_linked_instances[@]}"; do
         printf "|${cyan}%-57s${white}|\n" " ● moonraker-obico-${moonraker_names[${i}]}"
       done
     fi
     blank_line
-    echo -e "| To link to your Obico Server account, you need to     |"
-    echo -e "| obtain the 6-digit verification code in the Obico     |"
-    echo -e "| mobile or web app. For more information, visit:       |"
+    echo -e "| It will take only 10 seconds to link printer to Obico.|"
+    echo -e "| For more information, visit:                          |"
     echo -e "| https://www.obico.io/docs/user-guides/klipper-setup/  |"
     blank_line
     echo -e "| If you don't want to link the printer now, you can    |"
@@ -272,7 +270,7 @@ function moonraker_obico_setup_dialog() {
           break;;
         N|n|No|no)
           select_msg "No"
-          abort_msg "Exiting Moonraker-obico setup ...\n"
+          abort_msg "Exiting Obico setup ...\n"
           return;;
         *)
           error_msg "Invalid Input!";;
@@ -295,13 +293,13 @@ function moonraker_obico_setup_dialog() {
 function clone_moonraker_obico() {
   local repo=${1}
 
-  status_msg "Cloning Moonraker-obico from ${repo} ..."
-  ### force remove existing Moonraker-obico dir
+  status_msg "Cloning Obico from ${repo} ..."
+  ### force remove existing Obico dir
   [[ -d "${MOONRAKER_OBICO_DIR}" ]] && rm -rf "${MOONRAKER_OBICO_DIR}"
 
   cd "${HOME}" || exit 1
   if ! git clone "${repo}" "${MOONRAKER_OBICO_DIR}"; then
-    print_error "Cloning Moonraker-obico from\n ${repo}\n failed!"
+    print_error "Cloning Obico from\n ${repo}\n failed!"
     exit 1
   fi
 }
@@ -316,7 +314,7 @@ function moonraker_obico_install() {
 
 function remove_moonraker_obico_systemd() {
   [[ -z $(moonraker_obico_systemd) ]] && return
-  status_msg "Removing Moonraker-obico Systemd Services ..."
+  status_msg "Removing Obico Systemd Services ..."
 
   for service in $(moonraker_obico_systemd | cut -d"/" -f5); do
     status_msg "Removing ${service} ..."
@@ -329,7 +327,7 @@ function remove_moonraker_obico_systemd() {
   ### reloading units
   sudo systemctl daemon-reload
   sudo systemctl reset-failed
-  ok_msg "Moonraker-obico Services removed!"
+  ok_msg "Obico Services removed!"
 }
 
 function remove_moonraker_obico_logs() {
@@ -361,7 +359,7 @@ function remove_legacy_moonraker_obico_logs() {
 function remove_moonraker_obico_dir() {
   [[ ! -d ${MOONRAKER_OBICO_DIR} ]] && return
 
-  status_msg "Removing Moonraker-obico directory ..."
+  status_msg "Removing Obico directory ..."
   rm -rf "${MOONRAKER_OBICO_DIR}"
   ok_msg "Directory removed!"
 }
@@ -380,7 +378,7 @@ function remove_moonraker_obico() {
   remove_moonraker_obico_dir
   remove_moonraker_obico_env
 
-  print_confirm "Moonraker-obico was successfully removed!"
+  print_confirm "Obico was successfully removed!"
   return
 }
 
@@ -394,7 +392,7 @@ function update_moonraker_obico() {
   if [[ ! -d ${MOONRAKER_OBICO_DIR} ]]; then
     clone_moonraker_obico "${MOONRAKER_OBICO_REPO}"
   else
-    status_msg "Updating Moonraker-obico ..."
+    status_msg "Updating Obico ..."
     cd "${MOONRAKER_OBICO_DIR}" && git pull
   fi
 

scripts/octoeverywhere.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/octoprint.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/pretty_gcode.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/rollback.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/switch_klipper_repo.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -77,10 +77,12 @@ function change_klipper_repo_menu() {
               error_msg "Invalid command!";;
           esac
         done
+        break
       else
         status_msg "Set custom Klipper repository to:\n       ● Repository: ${repos[${option}]}\n       ● Branch: ${branches[${option}]}"
         set_custom_klipper_repo "${repos[${option}]}" "${branches[${option}]}"
         ok_msg "This repo will now be used for new Klipper installations!\n"
+        break
       fi
 
     elif [[ ${option} =~ ${back} ]]; then

scripts/ui/advanced_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/ui/backup_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -25,7 +25,7 @@ function backup_ui() {
   echo -e "|                            |                          |"
   echo -e "| Klipper Webinterface:      | Other:                   |"
   echo -e "|  5) [Mainsail]             |  9) [Telegram Bot]       |"
-  echo -e "|  6) [Fluidd]               |                          |"
+  echo -e "|  6) [Fluidd]               | 10) [OctoEverywhere]     |"
   back_footer
 }
 
@@ -54,6 +54,8 @@ function backup_menu() {
         do_action "backup_octoprint" "backup_ui";;
       9)
         do_action "backup_telegram_bot" "backup_ui";;
+      10)
+        do_action "backup_octoeverywhere" "backup_ui";;
       B|b)
         clear; main_menu; break;;
       *)

scripts/ui/general_ui.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/ui/install_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -35,7 +35,7 @@ function install_ui() {
 }
 
 function install_menu() {
-  clear -x && sudo -v && clear -x # (re)cache sudo credentials so password prompt doesn't bork ui
+  clear -x && sudo true && clear -x # (re)cache sudo credentials so password prompt doesn't bork ui
   print_header
   install_ui
 

scripts/ui/main_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -57,7 +57,7 @@ function print_status() {
   elif [[ ${status} == "Incomplete!" ]]; then
     status="${yellow}${status}${white}"
   elif [[ ${status} == "Not linked!" ]]; then
-    ### "Not linked!" is only required for Moonraker-obico
+    ### "Not linked!" is only required for Obico for Klipper
     status="${yellow}${status}${white}"
   else
     status="${green}${status}${white}"

scripts/ui/remove_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/ui/settings_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/ui/update_menu.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #
@@ -41,7 +41,7 @@ function update_ui() {
 }
 
 function update_menu() {
-  clear -x && sudo -v && clear -x # (re)cache sudo credentials so password prompt doesn't bork ui
+  clear -x && sudo true && clear -x # (re)cache sudo credentials so password prompt doesn't bork ui
   do_action "" "update_ui"
   
   local action

scripts/upload_log.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #

scripts/utilities.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 #=======================================================================#
-# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2024 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/dw-0/kiauh                                         #