mirror of
https://github.com/dw-0/kiauh.git
synced 2025-12-14 11:04:29 +05:00
script: refactoring of the flash routine
script: uart devices can be detected/selected now script: first implementation of a little help page
This commit is contained in:
th33xitus
279
scripts/flash_mcu.sh
Executable file
279
scripts/flash_mcu.sh
Executable file
@@ -0,0 +1,279 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
|
||||||
|
show_flash_method_help(){
|
||||||
|
top_border
|
||||||
|
echo -e "| ~~~~~~~~ < ? > Help: Flash MCU < ? > ~~~~~~~~ |"
|
||||||
|
hr
|
||||||
|
echo -e "| ${cyan}Regular flashing method:${default} |"
|
||||||
|
echo -e "| The default method to flash controller boards which |"
|
||||||
|
echo -e "| are connected and updated over USB and not by placing |"
|
||||||
|
echo -e "| a compiled firmware file onto an internal SD-Card. |"
|
||||||
|
blank_line
|
||||||
|
echo -e "| Common controllers that get flashed that way are: |"
|
||||||
|
echo -e "| - Arduino Mega 2560 |"
|
||||||
|
echo -e "| - Fysetc F6 / S6 (used without a Display + SD-Slot) |"
|
||||||
|
blank_line
|
||||||
|
echo -e "| ${cyan}Updating via SD-Card Update:${default} |"
|
||||||
|
echo -e "| Many popular controller boards ship with a bootloader |"
|
||||||
|
echo -e "| capable of updating the firmware via SD-Card. |"
|
||||||
|
echo -e "| Choose this method if your controller board supports |"
|
||||||
|
echo -e "| this way of updating. This method ONLY works for up- |"
|
||||||
|
echo -e "| grading firmware. The initial flashing procedure must |"
|
||||||
|
echo -e "| be done manually per the instructions that apply to |"
|
||||||
|
echo -e "| your controller board. |"
|
||||||
|
blank_line
|
||||||
|
echo -e "| Common controllers that can be flashed that way are: |"
|
||||||
|
echo -e "| - BigTreeTech SKR 1.3 / 1.4 (Turbo) / E3 / Mini E3 |"
|
||||||
|
echo -e "| - Fysetc F6 / S6 (used with a Display + SD-Slot) |"
|
||||||
|
echo -e "| - Fysetc Spider |"
|
||||||
|
blank_line
|
||||||
|
back_footer
|
||||||
|
while true; do
|
||||||
|
read -p "${cyan}###### Please select:${default} " choice
|
||||||
|
case "$choice" in
|
||||||
|
B|b)
|
||||||
|
clear && print_header
|
||||||
|
select_flash_method
|
||||||
|
break;;
|
||||||
|
*)
|
||||||
|
print_unkown_cmd
|
||||||
|
print_msg && clear_msg;;
|
||||||
|
esac
|
||||||
|
done
|
||||||
|
}
|
||||||
|
|
||||||
|
select_flash_method(){
|
||||||
|
top_border
|
||||||
|
echo -e "| ~~~~~~~~~~~~ [ Flash MCU ] ~~~~~~~~~~~~ |"
|
||||||
|
hr
|
||||||
|
echo -e "| Please select the flashing method to flash your MCU. |"
|
||||||
|
echo -e "| Make sure to only select a method your MCU supports. |"
|
||||||
|
echo -e "| Not all MCUs support both methods! |"
|
||||||
|
hr
|
||||||
|
blank_line
|
||||||
|
echo -e "| 1) Regular flashing method |"
|
||||||
|
echo -e "| 2) Updating via SD-Card Update |"
|
||||||
|
blank_line
|
||||||
|
back_help_footer
|
||||||
|
while true; do
|
||||||
|
read -p "${cyan}###### Please select:${default} " choice
|
||||||
|
case "$choice" in
|
||||||
|
1)
|
||||||
|
echo -e "###### > Regular flashing method"
|
||||||
|
select_mcu_connection
|
||||||
|
select_mcu_id
|
||||||
|
[ CONFIRM_FLASH ] && flash_mcu
|
||||||
|
break;;
|
||||||
|
2)
|
||||||
|
echo -e "###### > SD-Card Update"
|
||||||
|
select_mcu_connection
|
||||||
|
select_mcu_id
|
||||||
|
[ CONFIRM_FLASH ] && flash_mcu_sd
|
||||||
|
break;;
|
||||||
|
B|b)
|
||||||
|
advanced_menu
|
||||||
|
break;;
|
||||||
|
H|h)
|
||||||
|
clear && print_header
|
||||||
|
show_flash_method_help
|
||||||
|
break;;
|
||||||
|
*)
|
||||||
|
print_unkown_cmd
|
||||||
|
print_msg && clear_msg;;
|
||||||
|
esac
|
||||||
|
done
|
||||||
|
}
|
||||||
|
|
||||||
|
select_mcu_id(){
|
||||||
|
if [ ${#mcu_list[@]} -ge 1 ]; then
|
||||||
|
top_border
|
||||||
|
echo -e "| ${red}!!! ATTENTION !!!${default} |"
|
||||||
|
hr
|
||||||
|
echo -e "| Make sure, to select the correct MCU! |"
|
||||||
|
echo -e "| ${red}ONLY flash a firmware created for the respective MCU!${default} |"
|
||||||
|
bottom_border
|
||||||
|
echo -e "${cyan}###### List of available MCU:${default}"
|
||||||
|
### list all mcus
|
||||||
|
id=0
|
||||||
|
for mcu in ${mcu_list[@]}; do
|
||||||
|
let id++
|
||||||
|
echo -e " $id) $mcu"
|
||||||
|
done
|
||||||
|
### verify user input
|
||||||
|
sel_index=""
|
||||||
|
while [[ ! ($sel_index =~ ^[1-9]+$) ]] || [ $sel_index -gt $id ]; do
|
||||||
|
echo
|
||||||
|
read -p "${cyan}###### Select MCU to flash:${default} " sel_index
|
||||||
|
if [[ ! ($sel_index =~ ^[1-9]+$) ]]; then
|
||||||
|
warn_msg "Invalid input!"
|
||||||
|
elif [ $sel_index -lt 1 ] || [ $sel_index -gt $id ]; then
|
||||||
|
warn_msg "Please select a number between 1 and $id!"
|
||||||
|
fi
|
||||||
|
mcu_index=$(echo $((sel_index - 1)))
|
||||||
|
selected_mcu_id="${mcu_list[$mcu_index]}"
|
||||||
|
done
|
||||||
|
### confirm selection
|
||||||
|
while true; do
|
||||||
|
echo -e "\n###### You selected:\n ● MCU #$sel_index: $selected_mcu_id\n"
|
||||||
|
read -p "${cyan}###### Continue? (Y/n):${default} " yn
|
||||||
|
case "$yn" in
|
||||||
|
Y|y|Yes|yes|"")
|
||||||
|
echo -e "###### > Yes"
|
||||||
|
status_msg "Flashing $selected_mcu_id ..."
|
||||||
|
CONFIRM_FLASH="true"
|
||||||
|
break;;
|
||||||
|
N|n|No|no)
|
||||||
|
echo -e "###### > No"
|
||||||
|
CONFIRM_FLASH="false"
|
||||||
|
break;;
|
||||||
|
*)
|
||||||
|
print_unkown_cmd
|
||||||
|
print_msg && clear_msg;;
|
||||||
|
esac
|
||||||
|
done
|
||||||
|
fi
|
||||||
|
}
|
||||||
|
|
||||||
|
flash_mcu(){
|
||||||
|
do_action_service "stop" "klipper"
|
||||||
|
if ! make flash FLASH_DEVICE="${mcu_list[$mcu_index]}" ; then
|
||||||
|
warn_msg "Flashing failed!"
|
||||||
|
warn_msg "Please read the console output above!"
|
||||||
|
else
|
||||||
|
ok_msg "Flashing successfull!"
|
||||||
|
fi
|
||||||
|
do_action_service "start" "klipper"
|
||||||
|
}
|
||||||
|
|
||||||
|
flash_mcu_sd(){
|
||||||
|
do_action_service "stop" "klipper"
|
||||||
|
|
||||||
|
### write each supported board to the array to make it selectable
|
||||||
|
board_list=()
|
||||||
|
for board in $(~/klipper/scripts/flash-sdcard.sh -l | tail -n +2); do
|
||||||
|
board_list+=($board)
|
||||||
|
done
|
||||||
|
|
||||||
|
i=0
|
||||||
|
top_border
|
||||||
|
echo -e "| Please select the type of board that corresponds to |"
|
||||||
|
echo -e "| the currently selected MCU ID you chose before. |"
|
||||||
|
blank_line
|
||||||
|
echo -e "| The following boards are currently supported: |"
|
||||||
|
hr
|
||||||
|
### display all supported boards to the user
|
||||||
|
for board in ${board_list[@]}; do
|
||||||
|
if [ $i -lt 10 ]; then
|
||||||
|
printf "| $i) %-50s|\n" "${board_list[$i]}"
|
||||||
|
else
|
||||||
|
printf "| $i) %-49s|\n" "${board_list[$i]}"
|
||||||
|
fi
|
||||||
|
i=$((i + 1))
|
||||||
|
done
|
||||||
|
quit_footer
|
||||||
|
|
||||||
|
### make the user select one of the boards
|
||||||
|
while true; do
|
||||||
|
read -p "${cyan}###### Please select board type:${default} " choice
|
||||||
|
if [ $choice = "q" ] || [ $choice = "Q" ]; then
|
||||||
|
clear && advanced_menu && break
|
||||||
|
elif [ $choice -le ${#board_list[@]} ]; then
|
||||||
|
selected_board="${board_list[$choice]}"
|
||||||
|
break
|
||||||
|
else
|
||||||
|
clear && print_header
|
||||||
|
ERROR_MSG="Invalid choice!" && print_msg && clear_msg
|
||||||
|
flash_mcu_sd
|
||||||
|
fi
|
||||||
|
done
|
||||||
|
|
||||||
|
while true; do
|
||||||
|
top_border
|
||||||
|
echo -e "| If your board is flashed with firmware that connects |"
|
||||||
|
echo -e "| at a custom baud rate, please change it now. |"
|
||||||
|
blank_line
|
||||||
|
echo -e "| If you are unsure, stick to the default 250000! |"
|
||||||
|
bottom_border
|
||||||
|
echo -e "${cyan}###### Please set the baud rate:${default} "
|
||||||
|
unset baud_rate
|
||||||
|
while [[ ! $baud_rate =~ ^[0-9]+$ ]]; do
|
||||||
|
read -e -i "250000" -e baud_rate
|
||||||
|
selected_baud_rate=$baud_rate
|
||||||
|
break
|
||||||
|
done
|
||||||
|
break
|
||||||
|
done
|
||||||
|
|
||||||
|
if ! ${HOME}/klipper/scripts/flash-sdcard.sh -b "$selected_baud_rate" "$selected_mcu_id" "$selected_board" ; then
|
||||||
|
warn_msg "Flashing failed!"
|
||||||
|
warn_msg "Please read the console output above!"
|
||||||
|
else
|
||||||
|
ok_msg "Flashing successfull!"
|
||||||
|
fi
|
||||||
|
|
||||||
|
do_action_service "start" "klipper"
|
||||||
|
}
|
||||||
|
|
||||||
|
build_fw(){
|
||||||
|
if [ -d $KLIPPER_DIR ]; then
|
||||||
|
cd $KLIPPER_DIR
|
||||||
|
status_msg "Initializing firmware build ..."
|
||||||
|
dep=(build-essential dpkg-dev make)
|
||||||
|
dependency_check
|
||||||
|
make clean && make menuconfig
|
||||||
|
status_msg "Building firmware ..."
|
||||||
|
make && ok_msg "Firmware built!"
|
||||||
|
else
|
||||||
|
warn_msg "Can not build firmware without a Klipper directory!"
|
||||||
|
fi
|
||||||
|
}
|
||||||
|
|
||||||
|
select_mcu_connection(){
|
||||||
|
echo
|
||||||
|
top_border
|
||||||
|
echo -e "| ${yellow}Make sure to have the controller board connected now!${default} |"
|
||||||
|
blank_line
|
||||||
|
echo -e "| How is the controller board connected to the host? |"
|
||||||
|
echo -e "| 1) USB |"
|
||||||
|
echo -e "| 2) UART |"
|
||||||
|
bottom_border
|
||||||
|
while true; do
|
||||||
|
read -p "${cyan}###### Connection method:${default} " choice
|
||||||
|
case "$choice" in
|
||||||
|
1)
|
||||||
|
retrieve_id "USB"
|
||||||
|
break;;
|
||||||
|
2)
|
||||||
|
retrieve_id "UART"
|
||||||
|
break;;
|
||||||
|
*)
|
||||||
|
print_unkown_cmd
|
||||||
|
print_msg && clear_msg;;
|
||||||
|
esac
|
||||||
|
done
|
||||||
|
unset mcu_count
|
||||||
|
|
||||||
|
if [[ "${#mcu_list[@]}" -lt 1 ]]; then
|
||||||
|
warn_msg "No MCU found!"
|
||||||
|
warn_msg "MCU not plugged in or not detectable!"
|
||||||
|
echo
|
||||||
|
fi
|
||||||
|
}
|
||||||
|
|
||||||
|
retrieve_id(){
|
||||||
|
status_msg "Identifying MCU ..."
|
||||||
|
sleep 1
|
||||||
|
mcu_list=()
|
||||||
|
mcu_count=1
|
||||||
|
[ "$1" = "USB" ] && path="/dev/serial/by-id/*"
|
||||||
|
[ "$1" = "UART" ] && path="/dev/ttyAMA0"
|
||||||
|
if [[ "$(ls $path)" != "" ]] ; then
|
||||||
|
for mcu in $path; do
|
||||||
|
declare "mcu_id_$mcu_count"="$mcu"
|
||||||
|
mcu_id="mcu_id_$mcu_count"
|
||||||
|
mcu_list+=("${!mcu_id}")
|
||||||
|
echo -e " ● ($1) MCU #$mcu_count: ${cyan}$mcu${default}\n"
|
||||||
|
let mcu_count++
|
||||||
|
done
|
||||||
|
fi 2>/dev/null
|
||||||
|
}
|
||||||
@@ -176,246 +176,3 @@ create_klipper_service(){
|
|||||||
unset i
|
unset i
|
||||||
fi
|
fi
|
||||||
}
|
}
|
||||||
|
|
||||||
flash_routine(){
|
|
||||||
echo
|
|
||||||
top_border
|
|
||||||
echo -e "| ${red}~~~~~~~~~~~ [ ATTENTION! ] ~~~~~~~~~~~~${default} |"
|
|
||||||
hr
|
|
||||||
echo -e "| Flashing a Smoothie based board with this method will |"
|
|
||||||
echo -e "| certainly fail. This applies to boards like the SKR |"
|
|
||||||
echo -e "| V1.3 / V1.4. You have to copy the firmware file to |"
|
|
||||||
echo -e "| the SD card manually and rename it to 'firmware.bin'. |"
|
|
||||||
hr
|
|
||||||
echo -e "| You can find the file in: ~/klipper/out/klipper.bin |"
|
|
||||||
bottom_border
|
|
||||||
while true; do
|
|
||||||
read -p "${cyan}###### Do you want to continue? (Y/n):${default} " yn
|
|
||||||
case "$yn" in
|
|
||||||
Y|y|Yes|yes|"")
|
|
||||||
echo -e "###### > Yes"
|
|
||||||
FLASH_FIRMWARE="true"
|
|
||||||
get_mcu_id
|
|
||||||
break;;
|
|
||||||
N|n|No|no)
|
|
||||||
echo -e "###### > No"
|
|
||||||
FLASH_FIRMWARE="false"
|
|
||||||
break;;
|
|
||||||
*)
|
|
||||||
print_unkown_cmd
|
|
||||||
print_msg && clear_msg;;
|
|
||||||
esac
|
|
||||||
done
|
|
||||||
}
|
|
||||||
|
|
||||||
flash_routine_sd(){
|
|
||||||
echo
|
|
||||||
top_border
|
|
||||||
echo -e "| ${red}~~~~~~~~~~~ [ ATTENTION! ] ~~~~~~~~~~~~${default} |"
|
|
||||||
hr
|
|
||||||
echo -e "| If you have a Smoothie based board with an already |"
|
|
||||||
echo -e "| flashed Klipper Firmware, you can now choose to flash |"
|
|
||||||
echo -e "| directly from the internal SD if your control board |"
|
|
||||||
echo -e "| is supported by that function. |"
|
|
||||||
bottom_border
|
|
||||||
while true; do
|
|
||||||
read -p "${cyan}###### Do you want to continue? (Y/n):${default} " yn
|
|
||||||
case "$yn" in
|
|
||||||
Y|y|Yes|yes|"")
|
|
||||||
echo -e "###### > Yes"
|
|
||||||
FLASH_FW_SD="true"
|
|
||||||
get_mcu_id
|
|
||||||
break;;
|
|
||||||
N|n|No|no)
|
|
||||||
echo -e "###### > No"
|
|
||||||
FLASH_FW_SD="false"
|
|
||||||
break;;
|
|
||||||
*)
|
|
||||||
print_unkown_cmd
|
|
||||||
print_msg && clear_msg;;
|
|
||||||
esac
|
|
||||||
done
|
|
||||||
}
|
|
||||||
|
|
||||||
select_mcu_id(){
|
|
||||||
if [ ${#mcu_list[@]} -ge 1 ]; then
|
|
||||||
echo
|
|
||||||
top_border
|
|
||||||
echo -e "| ${red}!!! ATTENTION !!!${default} |"
|
|
||||||
hr
|
|
||||||
echo -e "| Make sure, to select the correct number for the MCU! |"
|
|
||||||
echo -e "| ${red}ONLY flash a firmware created for the respective MCU!${default} |"
|
|
||||||
bottom_border
|
|
||||||
echo -e "${cyan}###### List of available MCU:${default}"
|
|
||||||
### list all mcus
|
|
||||||
id=0
|
|
||||||
for mcu in ${mcu_list[@]}; do
|
|
||||||
let id++
|
|
||||||
echo -e " $id) $mcu"
|
|
||||||
done
|
|
||||||
### verify user input
|
|
||||||
sel_index=""
|
|
||||||
while [[ ! ($sel_index =~ ^[1-9]+$) ]] || [ $sel_index -gt $id ]; do
|
|
||||||
echo
|
|
||||||
read -p "${cyan}###### Select MCU to flash:${default} " sel_index
|
|
||||||
if [[ ! ($sel_index =~ ^[1-9]+$) ]]; then
|
|
||||||
warn_msg "Invalid input!"
|
|
||||||
elif [ $sel_index -lt 1 ] || [ $sel_index -gt $id ]; then
|
|
||||||
warn_msg "Please select a number between 1 and $id!"
|
|
||||||
fi
|
|
||||||
mcu_index=$(echo $((sel_index - 1)))
|
|
||||||
selected_mcu_id="${mcu_list[$mcu_index]}"
|
|
||||||
done
|
|
||||||
### process flashing
|
|
||||||
while true; do
|
|
||||||
echo -e "\n###### You selected:\n ● MCU #$sel_index: $selected_mcu_id\n"
|
|
||||||
read -p "${cyan}###### Continue? (Y/n):${default} " yn
|
|
||||||
case "$yn" in
|
|
||||||
Y|y|Yes|yes|"")
|
|
||||||
echo -e "###### > Yes"
|
|
||||||
status_msg "Flashing $selected_mcu_id ..."
|
|
||||||
if [ "$FLASH_FIRMWARE" = "true" ]; then
|
|
||||||
flash_mcu
|
|
||||||
fi
|
|
||||||
if [ "$FLASH_FW_SD" = "true" ]; then
|
|
||||||
flash_mcu_sd
|
|
||||||
fi
|
|
||||||
break;;
|
|
||||||
N|n|No|no)
|
|
||||||
echo -e "###### > No"
|
|
||||||
break;;
|
|
||||||
*)
|
|
||||||
print_unkown_cmd
|
|
||||||
print_msg && clear_msg;;
|
|
||||||
esac
|
|
||||||
done
|
|
||||||
fi
|
|
||||||
}
|
|
||||||
|
|
||||||
flash_mcu(){
|
|
||||||
do_action_service "stop" "klipper"
|
|
||||||
if ! make flash FLASH_DEVICE="${mcu_list[$mcu_index]}" ; then
|
|
||||||
warn_msg "Flashing failed!"
|
|
||||||
warn_msg "Please read the console output above!"
|
|
||||||
else
|
|
||||||
ok_msg "Flashing successfull!"
|
|
||||||
fi
|
|
||||||
do_action_service "start" "klipper"
|
|
||||||
}
|
|
||||||
|
|
||||||
flash_mcu_sd(){
|
|
||||||
do_action_service "stop" "klipper"
|
|
||||||
|
|
||||||
### write each supported board to the array to make it selectable
|
|
||||||
board_list=()
|
|
||||||
for board in $(~/klipper/scripts/flash-sdcard.sh -l | tail -n +2); do
|
|
||||||
board_list+=($board)
|
|
||||||
done
|
|
||||||
|
|
||||||
i=0
|
|
||||||
top_border
|
|
||||||
echo -e "| Please select the type of board that corresponds to |"
|
|
||||||
echo -e "| the currently selected MCU ID you chose before. |"
|
|
||||||
blank_line
|
|
||||||
echo -e "| The following boards are currently supported: |"
|
|
||||||
hr
|
|
||||||
### display all supported boards to the user
|
|
||||||
for board in ${board_list[@]}; do
|
|
||||||
if [ $i -lt 10 ]; then
|
|
||||||
printf "| $i) %-50s|\n" "${board_list[$i]}"
|
|
||||||
else
|
|
||||||
printf "| $i) %-49s|\n" "${board_list[$i]}"
|
|
||||||
fi
|
|
||||||
i=$((i + 1))
|
|
||||||
done
|
|
||||||
quit_footer
|
|
||||||
|
|
||||||
### make the user select one of the boards
|
|
||||||
while true; do
|
|
||||||
read -p "${cyan}###### Please select board type:${default} " choice
|
|
||||||
if [ $choice = "q" ] || [ $choice = "Q" ]; then
|
|
||||||
clear && advanced_menu && break
|
|
||||||
elif [ $choice -le ${#board_list[@]} ]; then
|
|
||||||
selected_board="${board_list[$choice]}"
|
|
||||||
break
|
|
||||||
else
|
|
||||||
clear && print_header
|
|
||||||
ERROR_MSG="Invalid choice!" && print_msg && clear_msg
|
|
||||||
flash_mcu_sd
|
|
||||||
fi
|
|
||||||
done
|
|
||||||
|
|
||||||
while true; do
|
|
||||||
top_border
|
|
||||||
echo -e "| If your board is flashed with firmware that connects |"
|
|
||||||
echo -e "| at a custom baud rate, please change it now. |"
|
|
||||||
blank_line
|
|
||||||
echo -e "| If you are unsure, stick to the default 250000! |"
|
|
||||||
bottom_border
|
|
||||||
echo -e "${cyan}###### Please set the baud rate:${default} "
|
|
||||||
unset baud_rate
|
|
||||||
while [[ ! $baud_rate =~ ^[0-9]+$ ]]; do
|
|
||||||
read -e -i "250000" -e baud_rate
|
|
||||||
selected_baud_rate=$baud_rate
|
|
||||||
break
|
|
||||||
done
|
|
||||||
break
|
|
||||||
done
|
|
||||||
|
|
||||||
if ! ${HOME}/klipper/scripts/flash-sdcard.sh -b "$selected_baud_rate" "$selected_mcu_id" "$selected_board" ; then
|
|
||||||
warn_msg "Flashing failed!"
|
|
||||||
warn_msg "Please read the console output above!"
|
|
||||||
else
|
|
||||||
ok_msg "Flashing successfull!"
|
|
||||||
fi
|
|
||||||
|
|
||||||
do_action_service "start" "klipper"
|
|
||||||
}
|
|
||||||
|
|
||||||
build_fw(){
|
|
||||||
if [ -d $KLIPPER_DIR ]; then
|
|
||||||
cd $KLIPPER_DIR
|
|
||||||
status_msg "Initializing firmware build ..."
|
|
||||||
dep=(build-essential dpkg-dev make)
|
|
||||||
dependency_check
|
|
||||||
make clean
|
|
||||||
make menuconfig
|
|
||||||
status_msg "Building firmware ..."
|
|
||||||
make && ok_msg "Firmware built!"
|
|
||||||
else
|
|
||||||
warn_msg "Can not build firmware without a Klipper directory!"
|
|
||||||
fi
|
|
||||||
}
|
|
||||||
|
|
||||||
### grab the mcu id
|
|
||||||
get_mcu_id(){
|
|
||||||
echo
|
|
||||||
top_border
|
|
||||||
echo -e "| Please make sure your MCU is connected to the Pi! |"
|
|
||||||
echo -e "| If the MCU is not connected yet, connect it now. |"
|
|
||||||
bottom_border
|
|
||||||
echo -e "${cyan}"
|
|
||||||
read -p "###### Press ANY KEY to continue ... " -n 1 -r
|
|
||||||
echo -e "${default}"
|
|
||||||
status_msg "Identifying the ID of your MCU ..."
|
|
||||||
sleep 1
|
|
||||||
unset MCU_ID
|
|
||||||
### if there are devices found, continue, else show warn message
|
|
||||||
if ls /dev/serial/by-id/* 2>/dev/null 1>&2; then
|
|
||||||
mcu_count=1
|
|
||||||
mcu_list=()
|
|
||||||
status_msg "The ID of your printers MCU is:"
|
|
||||||
### loop over the IDs, write every ID as an item of the array 'mcu_list'
|
|
||||||
for mcu in /dev/serial/by-id/*; do
|
|
||||||
declare "mcu_id_$mcu_count"="$mcu"
|
|
||||||
mcu_id="mcu_id_$mcu_count"
|
|
||||||
mcu_list+=("${!mcu_id}")
|
|
||||||
echo " ● MCU #$mcu_count: ${cyan}$mcu${default}"
|
|
||||||
mcu_count=$(expr $mcu_count + 1)
|
|
||||||
done
|
|
||||||
unset mcu_count
|
|
||||||
else
|
|
||||||
warn_msg "Could not retrieve ID!"
|
|
||||||
warn_msg "Printer not plugged in or not detectable!"
|
|
||||||
fi
|
|
||||||
}
|
|
||||||
|
|||||||
@@ -13,8 +13,8 @@ advanced_ui(){
|
|||||||
echo -e "| | System: | "
|
echo -e "| | System: | "
|
||||||
echo -e "| Firmware: | 8) [Change hostname] | "
|
echo -e "| Firmware: | 8) [Change hostname] | "
|
||||||
echo -e "| 3) [Build only] | | "
|
echo -e "| 3) [Build only] | | "
|
||||||
echo -e "| 4) [Build + Flash] | Extensions: | "
|
echo -e "| 4) [Flash only] | Extensions: | "
|
||||||
echo -e "| 5) [Build + SD Flash] | 9) [Shell Command] | "
|
echo -e "| 5) [Build + Flash] | 9) [Shell Command] | "
|
||||||
echo -e "| 6) [Get MCU ID] | | "
|
echo -e "| 6) [Get MCU ID] | | "
|
||||||
echo -e "| | CustomPiOS: | "
|
echo -e "| | CustomPiOS: | "
|
||||||
echo -e "| | 10) [Migration Helper] | "
|
echo -e "| | 10) [Migration Helper] | "
|
||||||
@@ -41,25 +41,16 @@ advanced_menu(){
|
|||||||
3)
|
3)
|
||||||
do_action "build_fw" "advanced_ui";;
|
do_action "build_fw" "advanced_ui";;
|
||||||
4)
|
4)
|
||||||
clear && print_header
|
do_action "select_flash_method" "advanced_ui";;
|
||||||
flash_routine
|
|
||||||
if [ $FLASH_FIRMWARE = "true" ]; then
|
|
||||||
status_msg "Please wait..." && sleep 3 && build_fw
|
|
||||||
select_mcu_id
|
|
||||||
fi
|
|
||||||
print_msg && clear_msg
|
|
||||||
advanced_ui;;
|
|
||||||
5)
|
5)
|
||||||
clear && print_header
|
clear && print_header
|
||||||
flash_routine_sd
|
status_msg "Please wait..."
|
||||||
if [ $FLASH_FW_SD = "true" ]; then
|
build_fw
|
||||||
status_msg "Please wait..." && sleep 3 && build_fw
|
select_flash_method
|
||||||
select_mcu_id
|
|
||||||
fi
|
|
||||||
print_msg && clear_msg
|
print_msg && clear_msg
|
||||||
advanced_ui;;
|
advanced_ui;;
|
||||||
6)
|
6)
|
||||||
do_action "get_mcu_id" "advanced_ui";;
|
do_action "select_mcu_connection" "advanced_ui";;
|
||||||
7)
|
7)
|
||||||
do_action "ms_theme_menu";;
|
do_action "ms_theme_menu";;
|
||||||
8)
|
8)
|
||||||
|
|||||||
@@ -1,6 +1,6 @@
|
|||||||
#ui total width = 57 chars
|
#ui total width = 57 chars
|
||||||
top_border(){
|
top_border(){
|
||||||
echo -e "/=======================================================\ "
|
echo -e "/=======================================================\\"
|
||||||
}
|
}
|
||||||
|
|
||||||
bottom_border(){
|
bottom_border(){
|
||||||
@@ -8,7 +8,7 @@ bottom_border(){
|
|||||||
}
|
}
|
||||||
|
|
||||||
blank_line(){
|
blank_line(){
|
||||||
echo -e "| | "
|
echo -e "| |"
|
||||||
}
|
}
|
||||||
|
|
||||||
hr(){
|
hr(){
|
||||||
@@ -17,13 +17,19 @@ hr(){
|
|||||||
|
|
||||||
quit_footer(){
|
quit_footer(){
|
||||||
hr
|
hr
|
||||||
echo -e "| ${red}Q) Quit${default} | "
|
echo -e "| ${red}Q) Quit${default} |"
|
||||||
bottom_border
|
bottom_border
|
||||||
}
|
}
|
||||||
|
|
||||||
back_footer(){
|
back_footer(){
|
||||||
hr
|
hr
|
||||||
echo -e "| ${green}B) Back${default} | "
|
echo -e "| ${green}B) « Back${default} |"
|
||||||
|
bottom_border
|
||||||
|
}
|
||||||
|
|
||||||
|
back_help_footer(){
|
||||||
|
hr
|
||||||
|
echo -e "| ${green}B) « Back${default} | ${yellow}H) Help [?]${default} |"
|
||||||
bottom_border
|
bottom_border
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|||||||
Reference in New Issue
Block a user