update: mainsail installation routine

2025-12-13 18:44:29 +05:00 · 2020-08-15 17:11:11 +02:00
parent 9c20ad7d99
commit c91718cfc3
4 changed files with 102 additions and 80 deletions
--- a/scripts/install_mainsail.sh
+++ b/scripts/install_mainsail.sh
@@ -1,5 +1,4 @@
 mainsail_install_routine(){
-  ERROR="0" #reset error state
  if [ -d $KLIPPER_DIR ]; then
    #disable octoprint service if installed
      if systemctl is-enabled octoprint.service -q 2>/dev/null; then
@@ -8,62 +7,73 @@ mainsail_install_routine(){
    disable_haproxy_lighttpd
    remove_haproxy_lighttpd
    install_moonraker
-    if [ "$ERROR" != "1" ]; then
-      check_printer_cfg
-      restart_moonraker
-      restart_klipper
-      create_reverse_proxy "mainsail"
-      test_api
-      test_nginx
-      install_mainsail
-      create_custom_hostname
-      ok_msg "Mainsail installation complete!"; echo
-    fi
+    check_printer_cfg
+    restart_moonraker
+    restart_klipper
+    create_reverse_proxy "mainsail"
+    test_api
+    test_nginx
+    install_mainsail
+    create_custom_hostname
+    ok_msg "Mainsail installation complete!"; echo
  else
    ERROR_MSG=" Please install Klipper first!\n Skipping..."
  fi
 }

 install_moonraker(){
-  cd $KLIPPER_DIR
-  if [[ $(git describe --all) = "remotes/Arksine/dev-moonraker-testing" ]]; then
-    dep=(wget curl unzip)
-    dependency_check
-    status_msg "Downloading Moonraker ..."
-    cd ${HOME} && git clone $MOONRAKER_REPO
-    ok_msg "Download complete!"
-    status_msg "Installing Moonraker ..."
-    $MOONRAKER_DIR/scripts/install-moonraker.sh && ok_msg "Moonraker successfully installed!"
-    #create sdcard folder if it doesn't exists yet
-    if [ ! -d ${HOME}/sdcard ]; then
-      mkdir ${HOME}/sdcard
-    fi
-    #create a moonraker.log symlink in home-dir just for convenience
-    if [ ! -e ${HOME}/moonraker.log ]; then
-      status_msg "Creating moonraker.log symlink ..."
-      ln -s /tmp/moonraker.log ${HOME}/moonraker.log && ok_msg "Symlink created!"
-    fi
+  dep=(wget curl unzip)
+  dependency_check
+  status_msg "Downloading Moonraker ..."
+  cd ${HOME} && git clone $MOONRAKER_REPO
+  ok_msg "Download complete!"
+  backup_printer_cfg
+  status_msg "Installing Moonraker ..."
+  $MOONRAKER_DIR/scripts/install-moonraker.sh && ok_msg "Moonraker successfully installed!"
+  #copy basic moonraker.conf
+  if [ ! -e ${HOME}/moonraker.conf ]; then
+    status_msg "Creating moonraker.conf ..."
+    cp ${HOME}/kiauh/resources/moonraker.conf ${HOME}
+    ok_msg "moonraker.conf created!"
+  fi
+  #create sdcard folder
+  if [ ! -d ${HOME}/sdcard ]; then
+    status_msg "Creating sdcard directory ..."
+    mkdir ${HOME}/sdcard
+    ok_msg "sdcard directory created!"
+  fi
+  #create klipper_config folder
+  if [ ! -d ${HOME}/klipper_config ]; then
+    status_msg "Creating klipper_config directory ..."
+    mkdir ${HOME}/klipper_config
+    ok_msg "klipper_config directory created!"
+  fi
+  #move printer.cfg to new config location
+  if [ -e ${HOME}/printer.cfg ]; then
+    status_msg "Moving printer.cfg to its new location ..."
+    mv ${HOME}/printer.cfg ${HOME}/klipper_config
+    ok_msg "Done!"
+    status_msg "Create symlink in home directory ..."
+    ln -s ${HOME}/klipper_config/printer.cfg ${HOME}
+    ok_msg "Done!"
  else
-    ERROR_MSG="You are not using the Moonraker fork!\n Please switch to the Moonraker fork first! Aborting ..."
-    ERROR=1
+    warn_msg "No printer.cfg was found!"
+    status_msg "Creating a default printer.cfg ..."
+    create_default_cfg
+    create_mainsail_macro_cfg
+    ln -s ${HOME}/klipper_config/printer.cfg ${HOME}
+    ok_msg "Default printer.cfg created!"
+  fi
+  #create a moonraker.log symlink in home-dir just for convenience
+  if [ ! -e ${HOME}/moonraker.log ]; then
+    status_msg "Creating moonraker.log symlink ..."
+    ln -s /tmp/moonraker.log ${HOME}/moonraker.log && ok_msg "Symlink created!"
  fi
 }

 check_printer_cfg(){
  if [ -e $PRINTER_CFG ]; then
    check_vsdcard_section
-    check_api_section
-  else
-    echo; warn_msg "No printer.cfg found!"
-    while true; do
-      echo -e "${cyan}"
-      read -p "###### Do you want to create a default config now? (Y/n): " yn
-      echo -e "${default}"
-      case "$yn" in
-        Y|y|Yes|yes|"") create_default_cfg; break;;
-        N|n|No|no) break;;
-      esac
-    done
  fi
 }

@@ -83,39 +93,19 @@ cat <<VSDCARD >> $PRINTER_CFG
 ##########################
 [virtual_sdcard]
 path: ~/sdcard
+
+[pause_resume]
+[display_status]
 ##########################
 ##########################
 VSDCARD
  fi
 }

-check_api_section(){
-  status_msg "Checking for moonraker configuration ..."
-  # check if api server is present in printer.cfg
-  if [[ $(grep '^\[moonraker\]$' $PRINTER_CFG) ]]; then
-    ok_msg "Moonraker already configured"
-  else
-    status_msg "No Moonraker entry found."
-    ok_msg "Moonraker entry added to printer.cfg!"
-# append the following lines to printer.cfg
-cat <<API >> $PRINTER_CFG
-
-##########################
-### CREATED WITH KIAUH ###
-##########################
-[moonraker]
-trusted_clients:
- 192.168.0.0/24
- 192.168.1.0/24
- 127.0.0.0/24
-##########################
-##########################
-API
-  fi
-}
-
 create_default_cfg(){
-cat <<DEFAULT_CFG >> $PRINTER_CFG
+#create default config
+touch ${HOME}/klipper_config/printer.cfg
+cat <<DEFAULT_CFG >> ${HOME}/klipper_config/printer.cfg

 ##########################
 ### CREATED WITH KIAUH ###
@@ -123,14 +113,22 @@ cat <<DEFAULT_CFG >> $PRINTER_CFG
 [virtual_sdcard]
 path: ~/sdcard

-[moonraker]
-trusted_clients:
- 192.168.0.0/24
- 192.168.1.0/24
- 127.0.0.0/24
-
 [pause_resume]
+[display_status]
+[include ~/klipper_config/mainsail_macros.cfg]

+##########################
+##########################
+DEFAULT_CFG
+}
+
+create_mainsail_macro_cfg(){
+#create extra mainsail macro config
+touch ${HOME}/klipper_config/mainsail_macros.cfg
+cat <<MAINSAIL_MACRO_CFG >> ${HOME}/klipper_config/mainsail_macros.cfg
+##########################
+### CREATED WITH KIAUH ###
+##########################
 [gcode_macro CANCEL]
 default_parameter_X: 230
 default_parameter_Y: 230
@@ -141,7 +139,7 @@ gcode:
    M141 S0
    M106 S0
    CLEAR_PAUSE
-    RESET_SD
+    SDCARD_RESET_FILE

 [gcode_macro CANCEL_PRINT]
 gcode:
@@ -172,7 +170,7 @@ gcode:
    BASE_RESUME
 ##########################
 ##########################
-DEFAULT_CFG
+MAINSAIL_MACRO_CFG
 }

 disable_haproxy_lighttpd(){
--- a/scripts/remove.sh
+++ b/scripts/remove.sh
@@ -65,6 +65,7 @@ remove_mainsail(){
  $MAINSAIL_DIR
  $MOONRAKER_DIR
  $MOONRAKER_ENV_DIR
+  ${HOME}/moonraker.conf
  ${HOME}/moonraker.log
  ${HOME}/.klippy_api_key
  ${HOME}/.moonraker_api_key
@@ -90,6 +91,18 @@ remove_mainsail(){
      status_msg "Removing Moonraker and moonraker-env directory ..."
      rm -rf $MOONRAKER_DIR $MOONRAKER_ENV_DIR && ok_msg "Directories removed!"
    fi
+    #remove moonraker.conf
+    if [ -e ${HOME}/moonraker.conf ]; then
+      status_msg "Removing moonraker.conf ..."
+      rm -rf ${HOME}/moonraker.conf && ok_msg "File removed!"
+    fi
+    #remove printer.cfg symlink, copy printer.cfg back into home dir
+    if [ -L ${HOME}/printer.cfg ]; then
+      status_msg "Removing printer.cfg symlink ..."
+      rm -rf ${HOME}/printer.cfg && ok_msg "Symlink removed!"
+      status_msg "Copy printer.cfg back into '${HOME}' ..."
+      cp ${HOME}/klipper_config/printer.cfg ${HOME} && ok_msg "File copied!"
+    fi
    #remove moonraker.log and symlink
    if [[ -L ${HOME}/moonraker.log || -e /tmp/moonraker.log ]]; then
      status_msg "Removing moonraker.log and Symlink ..."