diff --git a/resources/mainsail_macros.cfg b/resources/webui_macros.cfg
similarity index 74%
rename from resources/mainsail_macros.cfg
rename to resources/webui_macros.cfg
index f89deda..5becc06 100644
--- a/resources/mainsail_macros.cfg
+++ b/resources/webui_macros.cfg
@@ -1,6 +1,4 @@
-##########################
-### CREATED WITH KIAUH ###
-##########################
+### AUTOCREATED WITH KIAUH ###
 #is required to load the pause_resume module in klipper
 [pause_resume]
 
@@ -31,14 +29,8 @@ gcode:
 
 [gcode_macro CANCEL_PRINT]
 rename_existing: BASE_CANCEL_PRINT
-default_parameter_X: 230    #edit to your park position
-default_parameter_Y: 230    #edit to your park position
-default_parameter_Z: 10     #edit to your park position
 gcode:
-    M104 S0
-    M140 S0
-    M141 S0
-    M106 S0
+    TURN_OFF_HEATERS
     CLEAR_PAUSE
     SDCARD_RESET_FILE
     BASE_CANCEL_PRINT
diff --git a/scripts/install_fluidd.sh b/scripts/install_fluidd.sh
deleted file mode 100755
index 4af74fb..0000000
--- a/scripts/install_fluidd.sh
+++ /dev/null
@@ -1,94 +0,0 @@
-install_fluidd(){
-  if [ "$INST_FLUIDD" = "true" ]; then
-    #check if moonraker is already installed
-    check_moonraker
-    if [ "$MOONRAKER_SERVICE_FOUND" = "true" ]; then
-      #check for other enabled web interfaces
-      unset SET_LISTEN_PORT
-      detect_enabled_sites
-      #check if another site already listens to port 80
-      fluidd_port_check
-      #creating the fluidd nginx cfg
-      set_nginx_cfg "fluidd"
-      test_nginx "$SET_LISTEN_PORT"
-      fluidd_setup
-    fi
-  fi
-}
-
-fluidd_port_check(){
-  if [ "$FLUIDD_ENABLED" = "false" ]; then
-    if [ "$SITE_ENABLED" = "true" ]; then
-      status_msg "Detected other enabled interfaces:"
-      [ "$OCTOPRINT_ENABLED" = "true" ] && echo "   ${cyan}● OctoPrint - Port: $OCTOPRINT_PORT${default}"
-      [ "$MAINSAIL_ENABLED" = "true" ] && echo "   ${cyan}● Mainsail - Port: $MAINSAIL_PORT${default}"
-      [ "$DWC2_ENABLED" = "true" ] && echo "   ${cyan}● DWC2 - Port: $DWC2_PORT${default}"
-      if [ "$MAINSAIL_PORT" = "80" ] || [ "$DWC2_PORT" = "80" ] || [ "$OCTOPRINT_PORT" = "80" ]; then
-        PORT_80_BLOCKED="true"
-        select_fluidd_port
-      fi
-    else
-      DEFAULT_PORT=$(grep listen ${SRCDIR}/kiauh/resources/fluidd_nginx.cfg | head -1 | sed 's/^\s*//' | cut -d" " -f2 | cut -d";" -f1)
-      SET_LISTEN_PORT=$DEFAULT_PORT
-    fi
-    SET_NGINX_CFG="true"
-  else
-    SET_NGINX_CFG="false"
-  fi
-}
-
-select_fluidd_port(){
-  if [ "$PORT_80_BLOCKED" = "true" ]; then
-    echo
-    top_border
-    echo -e "|                    ${red}!!!WARNING!!!${default}                      |"
-    echo -e "| ${red}You need to choose a different port for Fluidd!${default}       |"
-    echo -e "| ${red}The following web interface is listening at port 80:${default}  |"
-    blank_line
-    [ "$OCTOPRINT_PORT" = "80" ] && echo "|  ● OctoPrint                                          |"
-    [ "$MAINSAIL_PORT" = "80" ] && echo "|  ● Mainsail                                           |"
-    [ "$DWC2_PORT" = "80" ] && echo "|  ● DWC2                                               |"
-    blank_line
-    echo -e "| Make sure you don't choose a port which was already   |"
-    echo -e "| assigned to one of the other web interfaces!          |"
-    blank_line
-    echo -e "| Be aware: there is ${red}NO${default} sanity check for the following  |"
-    echo -e "| input. So make sure to choose a valid port!           |"
-    bottom_border
-    while true; do
-      read -p "${cyan}Please enter a new Port:${default} " NEW_PORT
-      if [ "$NEW_PORT" != "$MAINSAIL_PORT" ] && [ "$NEW_PORT" != "$DWC2_PORT" ] && [ "$NEW_PORT" != "$OCTOPRINT_PORT" ]; then
-        echo "Setting port $NEW_PORT for Fluidd!"
-        SET_LISTEN_PORT=$NEW_PORT
-        break
-      else
-        echo "That port is already taken! Select a different one!"
-      fi
-    done
-  fi
-}
-
-get_fluidd_ver(){
-  FLUIDD_VERSION=$(curl -s https://api.github.com/repositories/295836951/releases/latest | grep tag_name | cut -d'"' -f4 | cut -d"v" -f2)
-}
-
-fluidd_setup(){
-  #get fluidd download url
-  FLUIDD_DL_URL=$(curl -s https://api.github.com/repositories/295836951/releases/latest | grep browser_download_url | cut -d'"' -f4)
-  #clean up an existing fluidd folder
-  [ -d $FLUIDD_DIR ] && rm -rf $FLUIDD_DIR
-  #create fresh fluidd folder and download fluidd
-  mkdir $FLUIDD_DIR && cd $FLUIDD_DIR
-  status_msg "Downloading Fluidd $FLUIDD_VERSION ..."
-  wget $FLUIDD_DL_URL && ok_msg "Download complete!"
-  #extract archive
-  status_msg "Unzipping archive ..."
-  unzip -q -o *.zip && ok_msg "Done!"
-  #write fluidd version to file for update check reasons
-  status_msg "Writing Fluidd version to file ..."
-  get_fluidd_ver && echo $FLUIDD_VERSION > $FLUIDD_DIR/version && ok_msg "Done!"
-  #delete downloaded zip
-  status_msg "Do a little cleanup ..."
-  rm -rf *.zip && ok_msg "Done!" && ok_msg "Fluidd installation complete!"
-  echo
-}
\ No newline at end of file
diff --git a/scripts/install_klipper_webui.sh b/scripts/install_klipper_webui.sh
new file mode 100755
index 0000000..4c6822a
--- /dev/null
+++ b/scripts/install_klipper_webui.sh
@@ -0,0 +1,246 @@
+check_moonraker(){
+  status_msg "Checking for Moonraker service ..."
+  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "moonraker.service")" ]; then
+    ok_msg "Moonraker service found!"; echo
+    MOONRAKER_SERVICE_FOUND="true"
+  else
+    warn_msg "Moonraker service not found!"
+    warn_msg "Please install Moonraker first!"; echo
+    MOONRAKER_SERVICE_FOUND="false"
+  fi
+}
+
+get_user_selection_webui(){
+  #ask user for webui default macros
+  while true; do
+    unset ADD_WEBUI_MACROS
+    echo
+    top_border
+    echo -e "| It is recommended to have some important macros to    |"
+    echo -e "| have full functionality of the web interface.         |"
+    blank_line
+    echo -e "| If you do not have such macros, you can choose to     |"
+    echo -e "| install the suggested default macros now.             |"
+    bottom_border
+    read -p "${cyan}###### Add the recommended macros? (Y/n):${default} " yn
+    case "$yn" in
+      Y|y|Yes|yes|"")
+        echo -e "###### > Yes"
+        ADD_WEBUI_MACROS="true"
+        break;;
+      N|n|No|no)
+        echo -e "###### > No"
+        ADD_WEBUI_MACROS="false"
+        break;;
+      *)
+        print_unkown_cmd
+        print_msg && clear_msg;;
+    esac
+  done
+}
+
+install_mainsail(){
+  get_user_selection_webui
+  #check if moonraker is already installed
+  check_moonraker
+  if [ "$MOONRAKER_SERVICE_FOUND" = "true" ]; then
+    #check for other enabled web interfaces
+    unset SET_LISTEN_PORT
+    detect_enabled_sites
+    #check if another site already listens to port 80
+    mainsail_port_check
+    #creating the mainsail nginx cfg
+    set_nginx_cfg "mainsail"
+    test_nginx "$SET_LISTEN_PORT"
+    locate_printer_cfg && read_printer_cfg "mainsail"
+    install_webui_macros
+    mainsail_setup
+  fi
+}
+
+install_fluidd(){
+  get_user_selection_webui
+  #check if moonraker is already installed
+  check_moonraker
+  if [ "$MOONRAKER_SERVICE_FOUND" = "true" ]; then
+    #check for other enabled web interfaces
+    unset SET_LISTEN_PORT
+    detect_enabled_sites
+    #check if another site already listens to port 80
+    fluidd_port_check
+    #creating the fluidd nginx cfg
+    set_nginx_cfg "fluidd"
+    test_nginx "$SET_LISTEN_PORT"
+    locate_printer_cfg && read_printer_cfg "fluidd"
+    install_webui_macros
+    fluidd_setup
+  fi
+}
+
+install_webui_macros(){
+  #copy webui_macros.cfg
+  if [ "$ADD_WEBUI_MACROS" = "true" ]; then
+    status_msg "Create webui_macros.cfg ..."
+    if [ ! -f ${HOME}/klipper_config/webui_macros.cfg ]; then
+      cp ${HOME}/kiauh/resources/webui_macros.cfg ${HOME}/klipper_config
+      ok_msg "File created!"
+    else
+      warn_msg "File already exists! Skipping ..."
+    fi
+  fi
+  write_printer_cfg
+}
+
+mainsail_port_check(){
+  if [ "$MAINSAIL_ENABLED" = "false" ]; then
+    if [ "$SITE_ENABLED" = "true" ]; then
+      status_msg "Detected other enabled interfaces:"
+      [ "$OCTOPRINT_ENABLED" = "true" ] && echo -e "   ${cyan}● OctoPrint - Port: $OCTOPRINT_PORT${default}"
+      [ "$FLUIDD_ENABLED" = "true" ] && echo -e "   ${cyan}● Fluidd - Port: $FLUIDD_PORT${default}"
+      [ "$DWC2_ENABLED" = "true" ] && echo -e "   ${cyan}● DWC2 - Port: $DWC2_PORT${default}"
+      if [ "$FLUIDD_PORT" = "80" ] || [ "$DWC2_PORT" = "80" ] || [ "$OCTOPRINT_PORT" = "80" ]; then
+        PORT_80_BLOCKED="true"
+        select_mainsail_port
+      fi
+    else
+      DEFAULT_PORT=$(grep listen ${SRCDIR}/kiauh/resources/mainsail_nginx.cfg | head -1 | sed 's/^\s*//' | cut -d" " -f2 | cut -d";" -f1)
+      SET_LISTEN_PORT=$DEFAULT_PORT
+    fi
+    SET_NGINX_CFG="true"
+  else
+    SET_NGINX_CFG="false"
+  fi
+}
+
+fluidd_port_check(){
+  if [ "$FLUIDD_ENABLED" = "false" ]; then
+    if [ "$SITE_ENABLED" = "true" ]; then
+      status_msg "Detected other enabled interfaces:"
+      [ "$OCTOPRINT_ENABLED" = "true" ] && echo "   ${cyan}● OctoPrint - Port: $OCTOPRINT_PORT${default}"
+      [ "$MAINSAIL_ENABLED" = "true" ] && echo "   ${cyan}● Mainsail - Port: $MAINSAIL_PORT${default}"
+      [ "$DWC2_ENABLED" = "true" ] && echo "   ${cyan}● DWC2 - Port: $DWC2_PORT${default}"
+      if [ "$MAINSAIL_PORT" = "80" ] || [ "$DWC2_PORT" = "80" ] || [ "$OCTOPRINT_PORT" = "80" ]; then
+        PORT_80_BLOCKED="true"
+        select_fluidd_port
+      fi
+    else
+      DEFAULT_PORT=$(grep listen ${SRCDIR}/kiauh/resources/fluidd_nginx.cfg | head -1 | sed 's/^\s*//' | cut -d" " -f2 | cut -d";" -f1)
+      SET_LISTEN_PORT=$DEFAULT_PORT
+    fi
+    SET_NGINX_CFG="true"
+  else
+    SET_NGINX_CFG="false"
+  fi
+}
+
+select_mainsail_port(){
+  if [ "$PORT_80_BLOCKED" = "true" ]; then
+    echo
+    top_border
+    echo -e "|                    ${red}!!!WARNING!!!${default}                      |"
+    echo -e "| ${red}You need to choose a different port for Mainsail!${default}     |"
+    echo -e "| ${red}The following web interface is listening at port 80:${default}  |"
+    blank_line
+    [ "$OCTOPRINT_PORT" = "80" ] && echo "|  ● OctoPrint                                          |"
+    [ "$FLUIDD_PORT" = "80" ] && echo "|  ● Fluidd                                             |"
+    [ "$DWC2_PORT" = "80" ] && echo "|  ● DWC2                                               |"
+    blank_line
+    echo -e "| Make sure you don't choose a port which was already   |"
+    echo -e "| assigned to one of the other web interfaces!          |"
+    blank_line
+    echo -e "| Be aware: there is ${red}NO${default} sanity check for the following  |"
+    echo -e "| input. So make sure to choose a valid port!           |"
+    bottom_border
+    while true; do
+      read -p "${cyan}Please enter a new Port:${default} " NEW_PORT
+      if [ "$NEW_PORT" != "$FLUIDD_PORT" ] && [ "$NEW_PORT" != "$DWC2_PORT" ] && [ "$NEW_PORT" != "$OCTOPRINT_PORT" ]; then
+        echo "Setting port $NEW_PORT for Mainsail!"
+        SET_LISTEN_PORT=$NEW_PORT
+        break
+      else
+        echo "That port is already taken! Select a different one!"
+      fi
+    done
+  fi
+}
+
+select_fluidd_port(){
+  if [ "$PORT_80_BLOCKED" = "true" ]; then
+    echo
+    top_border
+    echo -e "|                    ${red}!!!WARNING!!!${default}                      |"
+    echo -e "| ${red}You need to choose a different port for Fluidd!${default}       |"
+    echo -e "| ${red}The following web interface is listening at port 80:${default}  |"
+    blank_line
+    [ "$OCTOPRINT_PORT" = "80" ] && echo "|  ● OctoPrint                                          |"
+    [ "$MAINSAIL_PORT" = "80" ] && echo "|  ● Mainsail                                           |"
+    [ "$DWC2_PORT" = "80" ] && echo "|  ● DWC2                                               |"
+    blank_line
+    echo -e "| Make sure you don't choose a port which was already   |"
+    echo -e "| assigned to one of the other web interfaces!          |"
+    blank_line
+    echo -e "| Be aware: there is ${red}NO${default} sanity check for the following  |"
+    echo -e "| input. So make sure to choose a valid port!           |"
+    bottom_border
+    while true; do
+      read -p "${cyan}Please enter a new Port:${default} " NEW_PORT
+      if [ "$NEW_PORT" != "$MAINSAIL_PORT" ] && [ "$NEW_PORT" != "$DWC2_PORT" ] && [ "$NEW_PORT" != "$OCTOPRINT_PORT" ]; then
+        echo "Setting port $NEW_PORT for Fluidd!"
+        SET_LISTEN_PORT=$NEW_PORT
+        break
+      else
+        echo "That port is already taken! Select a different one!"
+      fi
+    done
+  fi
+}
+
+get_mainsail_ver(){
+  MAINSAIL_VERSION=$(curl -s https://api.github.com/repositories/240875926/releases | grep tag_name | cut -d'"' -f4 | cut -d"v" -f2 | head -1)
+}
+
+get_fluidd_ver(){
+  FLUIDD_VERSION=$(curl -s https://api.github.com/repositories/295836951/releases | grep tag_name | cut -d'"' -f4 | cut -d"v" -f2 | head -1)
+}
+
+mainsail_setup(){
+  #get mainsail download url
+  MAINSAIL_DL_URL=$(curl -s https://api.github.com/repositories/240875926/releases | grep browser_download_url | cut -d'"' -f4 | head -1)
+  #clean up an existing mainsail folder
+  [ -d $MAINSAIL_DIR ] && rm -rf $MAINSAIL_DIR
+  #create fresh mainsail folder and download mainsail
+  mkdir $MAINSAIL_DIR && cd $MAINSAIL_DIR
+  status_msg "Downloading Mainsail $MAINSAIL_VERSION ..."
+  wget $MAINSAIL_DL_URL && ok_msg "Download complete!"
+  #extract archive
+  status_msg "Extracting archive ..."
+  unzip -q -o *.zip && ok_msg "Done!"
+  ### write mainsail version to file for update check reasons
+  status_msg "Writing Mainsail version to file ..."
+  get_mainsail_ver && echo "$MAINSAIL_VERSION" > $MAINSAIL_DIR/version && ok_msg "Done!"
+  #delete downloaded zip
+  status_msg "Remove downloaded archive ..."
+  rm -rf *.zip && ok_msg "Done!" && ok_msg "Mainsail installation complete!"
+  echo
+}
+
+fluidd_setup(){
+  #get fluidd download url
+  FLUIDD_DL_URL=$(curl -s https://api.github.com/repositories/295836951/releases/latest | grep browser_download_url | cut -d'"' -f4)
+  #clean up an existing fluidd folder
+  [ -d $FLUIDD_DIR ] && rm -rf $FLUIDD_DIR
+  #create fresh fluidd folder and download fluidd
+  mkdir $FLUIDD_DIR && cd $FLUIDD_DIR
+  status_msg "Downloading Fluidd $FLUIDD_VERSION ..."
+  wget $FLUIDD_DL_URL && ok_msg "Download complete!"
+  #extract archive
+  status_msg "Extracting archive ..."
+  unzip -q -o *.zip && ok_msg "Done!"
+  #write fluidd version to file for update check reasons
+  status_msg "Writing Fluidd version to file ..."
+  get_fluidd_ver && echo $FLUIDD_VERSION > $FLUIDD_DIR/version && ok_msg "Done!"
+  #delete downloaded zip
+  status_msg "Remove downloaded archive ..."
+  rm -rf *.zip && ok_msg "Done!" && ok_msg "Fluidd installation complete!"
+  echo
+}
\ No newline at end of file
diff --git a/scripts/install_mainsail.sh b/scripts/install_mainsail.sh
deleted file mode 100755
index cafd9d9..0000000
--- a/scripts/install_mainsail.sh
+++ /dev/null
@@ -1,103 +0,0 @@
-install_mainsail(){
-  if [ "$INST_MAINSAIL" = "true" ]; then
-    #check if moonraker is already installed
-    check_moonraker
-    if [ "$MOONRAKER_SERVICE_FOUND" = "true" ]; then
-      #check for other enabled web interfaces
-      unset SET_LISTEN_PORT
-      detect_enabled_sites
-      #check if another site already listens to port 80
-      mainsail_port_check
-      #creating the mainsail nginx cfg
-      set_nginx_cfg "mainsail"
-      test_nginx "$SET_LISTEN_PORT"
-      mainsail_setup && ok_msg "Mainsail installation complete!"; echo
-    fi
-  fi
-}
-
-check_moonraker(){
-  status_msg "Checking for Moonraker service ..."
-  if [ "$(systemctl list-units --full -all -t service --no-legend | grep -F "moonraker.service")" ]; then
-    ok_msg "Moonraker service found!"; echo
-    MOONRAKER_SERVICE_FOUND="true"
-  else
-    warn_msg "Moonraker service not found!"
-    warn_msg "Please install Moonraker first!"; echo
-    MOONRAKER_SERVICE_FOUND="false"
-  fi
-}
-
-mainsail_port_check(){
-  if [ "$MAINSAIL_ENABLED" = "false" ]; then
-    if [ "$SITE_ENABLED" = "true" ]; then
-      status_msg "Detected other enabled interfaces:"
-      [ "$OCTOPRINT_ENABLED" = "true" ] && echo -e "   ${cyan}● OctoPrint - Port: $OCTOPRINT_PORT${default}"
-      [ "$FLUIDD_ENABLED" = "true" ] && echo -e "   ${cyan}● Fluidd - Port: $FLUIDD_PORT${default}"
-      [ "$DWC2_ENABLED" = "true" ] && echo -e "   ${cyan}● DWC2 - Port: $DWC2_PORT${default}"
-      if [ "$FLUIDD_PORT" = "80" ] || [ "$DWC2_PORT" = "80" ] || [ "$OCTOPRINT_PORT" = "80" ]; then
-        PORT_80_BLOCKED="true"
-        select_mainsail_port
-      fi
-    else
-      DEFAULT_PORT=$(grep listen ${SRCDIR}/kiauh/resources/mainsail_nginx.cfg | head -1 | sed 's/^\s*//' | cut -d" " -f2 | cut -d";" -f1)
-      SET_LISTEN_PORT=$DEFAULT_PORT
-    fi
-    SET_NGINX_CFG="true"
-  else
-    SET_NGINX_CFG="false"
-  fi
-}
-
-select_mainsail_port(){
-  if [ "$PORT_80_BLOCKED" = "true" ]; then
-    echo
-    top_border
-    echo -e "|                    ${red}!!!WARNING!!!${default}                      |"
-    echo -e "| ${red}You need to choose a different port for Mainsail!${default}     |"
-    echo -e "| ${red}The following web interface is listening at port 80:${default}  |"
-    blank_line
-    [ "$OCTOPRINT_PORT" = "80" ] && echo "|  ● OctoPrint                                          |"
-    [ "$FLUIDD_PORT" = "80" ] && echo "|  ● Fluidd                                             |"
-    [ "$DWC2_PORT" = "80" ] && echo "|  ● DWC2                                               |"
-    blank_line
-    echo -e "| Make sure you don't choose a port which was already   |"
-    echo -e "| assigned to one of the other web interfaces!          |"
-    blank_line
-    echo -e "| Be aware: there is ${red}NO${default} sanity check for the following  |"
-    echo -e "| input. So make sure to choose a valid port!           |"
-    bottom_border
-    while true; do
-      read -p "${cyan}Please enter a new Port:${default} " NEW_PORT
-      if [ "$NEW_PORT" != "$FLUIDD_PORT" ] && [ "$NEW_PORT" != "$DWC2_PORT" ] && [ "$NEW_PORT" != "$OCTOPRINT_PORT" ]; then
-        echo "Setting port $NEW_PORT for Mainsail!"
-        SET_LISTEN_PORT=$NEW_PORT
-        break
-      else
-        echo "That port is already taken! Select a different one!"
-      fi
-    done
-  fi
-}
-
-get_mainsail_ver(){
-  MAINSAIL_VERSION=$(curl -s https://api.github.com/repositories/240875926/tags | grep name | cut -d'"' -f4 | cut -d"v" -f2 | head -1)
-}
-
-mainsail_dl_url(){
-  get_mainsail_ver
-  MAINSAIL_URL=https://github.com/meteyou/mainsail/releases/download/v$MAINSAIL_VERSION/mainsail-beta-$MAINSAIL_VERSION.zip
-}
-
-mainsail_setup(){
-  mainsail_dl_url
-  #clean up an existing mainsail folder
-  [ -d $MAINSAIL_DIR ] && rm -rf $MAINSAIL_DIR
-  #create fresh mainsail folder and download mainsail
-  mkdir $MAINSAIL_DIR && cd $MAINSAIL_DIR
-  status_msg "Downloading Mainsail v$MAINSAIL_VERSION ..."
-  wget -O mainsail.zip $MAINSAIL_URL && status_msg "Extracting archive ..." && unzip -o mainsail.zip && rm mainsail.zip
-  ### write mainsail version to file for update check reasons
-  echo "$MAINSAIL_VERSION" > $MAINSAIL_DIR/version
-  echo
-}
\ No newline at end of file
diff --git a/scripts/install_moonraker.sh b/scripts/install_moonraker.sh
index 005e006..a6431e9 100755
--- a/scripts/install_moonraker.sh
+++ b/scripts/install_moonraker.sh
@@ -8,13 +8,12 @@ install_moonraker(){
   moonraker_setup
   check_for_folder_moonraker
   #setup configs
-  setup_printer_config_mainsail
+  setup_printer_config_moonraker
   setup_moonraker_conf
   #execute customizations
   write_custom_trusted_clients
   symlinks_moonraker
   disable_octoprint
-  set_hostname
   #after install actions
   restart_moonraker
   restart_klipper
@@ -32,17 +31,9 @@ system_check_moonraker(){
     PRINTER_CFG_FOUND="false"
   fi
   #check for existing klippy.log symlink in /klipper_config
-  if [ ! -e ${HOME}/klipper_config/klippy.log ]; then
-    KLIPPY_SL_FOUND="false"
-  else
-    KLIPPY_SL_FOUND="true"
-  fi
+  [ ! -e ${HOME}/klipper_config/klippy.log ] && KLIPPY_SL_FOUND="false"
   #check for existing moonraker.log symlink in /klipper_config
-  if [ ! -e ${HOME}/klipper_config/moonraker.log ]; then
-    MOONRAKER_SL_FOUND="false"
-  else
-    MOONRAKER_SL_FOUND="true"
-  fi
+  [ ! -e ${HOME}/klipper_config/moonraker.log ] && MOONRAKER_SL_FOUND="false"
   #check for existing moonraker.conf
   if [ ! -f ${HOME}/moonraker.conf ]; then
     MOONRAKER_CONF_FOUND="false"
@@ -55,13 +46,9 @@ system_check_moonraker(){
     OCTOPRINT_ENABLED="true"
   fi
   #check if haproxy is installed
-  if [[ $(dpkg-query -f'${Status}' --show haproxy 2>/dev/null) = *\ installed ]]; then
-    HAPROXY_FOUND="true"
-  fi
+  [[ $(dpkg-query -f'${Status}' --show haproxy 2>/dev/null) = *\ installed ]] && HAPROXY_FOUND="true"
   #check if lighttpd is installed
-  if [[ $(dpkg-query -f'${Status}' --show lighttpd 2>/dev/null) = *\ installed ]]; then
-    LIGHTTPD_FOUND="true"
-  fi
+  [[ $(dpkg-query -f'${Status}' --show lighttpd 2>/dev/null) = *\ installed ]] && LIGHTTPD_FOUND="true"
 }
 
 get_user_selections_moonraker(){
@@ -158,25 +145,6 @@ get_user_selections_moonraker(){
           print_msg && clear_msg;;
       esac
     done
-  #ask user for mainsail default macros
-    while true; do
-      unset ADD_MS_MACROS
-      echo
-      read -p "${cyan}###### Add the recommended Mainsail macros? (Y/n):${default} " yn
-      case "$yn" in
-        Y|y|Yes|yes|"")
-          echo -e "###### > Yes"
-          ADD_MS_MACROS="true"
-          break;;
-        N|n|No|no)
-          echo -e "###### > No"
-          ADD_MS_MACROS="false"
-          break;;
-        *)
-          print_unkown_cmd
-          print_msg && clear_msg;;
-      esac
-    done
   #ask user to disable octoprint when such installed service was found
   if [ "$OCTOPRINT_ENABLED" = "true" ]; then
     unset DISABLE_OPRINT
@@ -274,9 +242,6 @@ moonraker_setup(){
   dep=(wget curl unzip dfu-util nginx)
   dependency_check
   status_msg "Downloading Moonraker ..."
-  if [ -d $MOONRAKER_DIR ]; then
-    mv -f $MOONRAKER_DIR ${HOME}/moonraker_bak
-  fi
   cd ${HOME} && git clone $MOONRAKER_REPO
   ok_msg "Download complete!"
   status_msg "Installing Moonraker ..."
@@ -354,7 +319,7 @@ check_for_folder_moonraker(){
 #############################################################
 #############################################################
 
-setup_printer_config_mainsail(){
+setup_printer_config_moonraker(){
   if [ "$PRINTER_CFG_FOUND" = "true" ]; then
     backup_printer_cfg
     #copy printer.cfg to new location if
@@ -365,34 +330,20 @@ setup_printer_config_mainsail(){
       ok_msg "printer.cfg location: '$PRINTER_CFG'"
       ok_msg "Done!"
     fi
-    #check printer.cfg for necessary mainsail entries
-    read_printer_cfg_mainsail
-    write_printer_cfg_mainsail
+    #check printer.cfg for necessary moonraker entries
+    read_printer_cfg "moonraker"
+    write_printer_cfg
   fi
   if [ "$SEL_DEF_CFG" = "true" ]; then
     status_msg "Creating minimal default printer.cfg ..."
-    create_default_mainsail_printer_cfg
+    create_default_moonraker_printer_cfg
     ok_msg "printer.cfg location: '$PRINTER_CFG'"
     ok_msg "Done!"
   fi
-  #copy mainsail_macro.cfg
-  if [ "$ADD_MS_MACROS" = "true" ]; then
-    status_msg "Create mainsail_macros.cfg ..."
-    if [ ! -f ${HOME}/klipper_config/mainsail_macros.cfg ]; then
-      cp ${HOME}/kiauh/resources/mainsail_macros.cfg ${HOME}/klipper_config
-      ok_msg "File created!"
-    else
-      warn_msg "File does already exist! Skipping ..."
-    fi
-  fi
 }
 
-read_printer_cfg_mainsail(){
+sc_check(){
   SC="#*# <---------------------- SAVE_CONFIG ---------------------->"
-  [ ! "$(grep '^\[virtual_sdcard\]$' $PRINTER_CFG)" ] && VSD="false"
-  [ ! "$(grep '^\[pause_resume\]$' $PRINTER_CFG)" ] && PAUSE_RESUME="false"
-  [ ! "$(grep '^\[display_status\]$' $PRINTER_CFG)" ] && DISPLAY_STATUS="false"
-  [ ! "$(grep '^\[include mainsail_macros\.cfg\]$' $PRINTER_CFG)" ] && MS_MACRO="false"
   #check for a SAVE_CONFIG entry
   if [[ $(grep "$SC" $PRINTER_CFG) ]]; then
     SC_LINE=$(grep -n "$SC" $PRINTER_CFG | cut -d ":" -f1)
@@ -403,39 +354,39 @@ read_printer_cfg_mainsail(){
   fi
 }
 
-write_printer_cfg_mainsail(){
+read_printer_cfg(){
+  echo "selected: $1"
+  echo "pre sc"
+  sc_check
+  echo "past sc"
+  if [ "$1" = "moonraker" ]; then
+  echo "$1" && echo "moonraker"
+    [ ! "$(grep '^\[virtual_sdcard\]$' $PRINTER_CFG)" ] && VSD="false"
+    [ ! "$(grep '^\[pause_resume\]$' $PRINTER_CFG)" ] && PAUSE_RESUME="false"
+    [ ! "$(grep '^\[display_status\]$' $PRINTER_CFG)" ] && DISPLAY_STATUS="false"
+  elif [ "$1" = "mainsail" ] || [ "$1" = "fluidd" ]; then
+    echo "$1" && echo "mainsail/fluidd"
+    [ ! "$(grep '^\[include webui_macros\.cfg\]$' $PRINTER_CFG)" ] && WEBUI_MACROS="false"
+  fi
+}
+
+write_printer_cfg(){
   unset write_entries
-  if [ "$MS_MACRO" = "false" ] && [ "$ADD_MS_MACROS" = "true" ]; then
-    write_entries+=("[include mainsail_macros.cfg]")
-  fi
-  if [ "$PAUSE_RESUME" = "false" ]; then
-    write_entries+=("[pause_resume]")
-  fi
-  if [ "$DISPLAY_STATUS" = "false" ]; then
-    write_entries+=("[display_status]")
-  fi
-  if [ "$VSD" = "false" ]; then
-    write_entries+=("[virtual_sdcard]\npath: ~/sdcard")
-  fi
-  if [ "${#write_entries[@]}" != "0" ]; then
-    write_entries+=("\\\n############################\n##### CREATED BY KIAUH #####\n############################")
-    write_entries=("############################\n" "${write_entries[@]}")
-  fi
-  #execute writing
-  status_msg "Writing to printer.cfg ..."
-  if [ "$SC_ENTRY" = "true" ]; then
-    PRE_SC_LINE="$(expr $SC_LINE - 1)a"
-    for entry in "${write_entries[@]}"
-    do
-      sed -i "$PRE_SC_LINE $entry" $PRINTER_CFG
-    done
-  fi
-  if [ "$SC_ENTRY" = "false" ]; then
-    LINE_COUNT="$(wc -l < $PRINTER_CFG)a"
-    for entry in "${write_entries[@]}"
-    do
-      sed -i "$LINE_COUNT $entry" $PRINTER_CFG
-    done
+  [ "$VSD" = "false" ] && write_entries+=("[virtual_sdcard]\npath: ~/sdcard")
+  [ "$PAUSE_RESUME" = "false" ] && write_entries+=("[pause_resume]")
+  [ "$DISPLAY_STATUS" = "false" ] && write_entries+=("[display_status]")
+  [ "$WEBUI_MACROS" = "false" ] && [ "$ADD_WEBUI_MACROS" = "true" ] && write_entries+=("[include webui_macros.cfg]")
+  [ "${#write_entries[@]}" != "0" ] && write_entries=("##### AUTOCREATED BY KIAUH #####" "${write_entries[@]}")
+  #write needed entries to kiauh.cfg
+  for entry in "${write_entries[@]}"; do echo -e "$entry" >> ~/klipper_config/kiauh.cfg; done
+  #execute writing to printer.cfg
+  if [ ! "$(grep '^\[include kiauh\.cfg\]$' $PRINTER_CFG)" ]; then
+    status_msg "Writing [include kiauh.cfg] to printer.cfg ..."
+    [ "$SC_ENTRY" = "false" ] && echo -e "\n\n[include kiauh.cfg]\c" >> $PRINTER_CFG
+    if [ "$SC_ENTRY" = "true" ]; then
+      PRE_SC_LINE="$(expr $SC_LINE - 1)a"
+      sed -i "$PRE_SC_LINE [include kiauh.cfg]" $PRINTER_CFG
+    fi
   fi
   ok_msg "Done!"
 }
@@ -479,23 +430,16 @@ setup_moonraker_nginx_cfg(){
 #############################################################
 #############################################################
 
-create_default_mainsail_printer_cfg(){
+create_default_moonraker_printer_cfg(){
 #create default config
 touch ${HOME}/klipper_config/printer.cfg
 cat <<DEFAULT_CFG >> ${HOME}/klipper_config/printer.cfg
-
-##########################
-### CREATED WITH KIAUH ###
-##########################
+### AUTOCREATED WITH KIAUH ###
 [virtual_sdcard]
 path: ~/sdcard
 
 [pause_resume]
 [display_status]
-[include mainsail_macros.cfg]
-
-##########################
-##########################
 DEFAULT_CFG
 }
 
diff --git a/scripts/ui/install_menu.sh b/scripts/ui/install_menu.sh
index 4dc97b9..8fbefc0 100755
--- a/scripts/ui/install_menu.sh
+++ b/scripts/ui/install_menu.sh
@@ -41,13 +41,13 @@ install_menu(){
       4)
         clear
         print_header
-        INST_MAINSAIL="true" && install_mainsail
+        install_mainsail
         print_msg && clear_msg
         install_ui;;
       5)
         clear
         print_header
-        INST_FLUIDD="true" && install_fluidd
+        install_fluidd
         print_msg && clear_msg
         install_ui;;
       6)