diff --git a/README.md b/README.md
index 72ece02..680211d 100644
--- a/README.md
+++ b/README.md
@@ -1,8 +1,6 @@
-
- 
+ 
Klipper Installation And Update Helper
-
@@ -27,75 +25,100 @@
### 📋 Prerequisites
-KIAUH is a script that assists you in installing Klipper on a Linux operating system that has
-already been flashed to your Raspberry Pi's (or other SBC's) SD card. As a result, you must ensure
-that you have a functional Linux system on hand. `Raspberry Pi OS Lite (either 32bit or 64bit)` is a recommended Linux image
-if you are using a Raspberry Pi. The [official Raspberry Pi Imager](https://www.raspberrypi.com/software/)
+
+KIAUH is a script that assists you in installing Klipper on a Linux operating
+system that has
+already been flashed to your Raspberry Pi's (or other SBC's) SD card. As a
+result, you must ensure
+that you have a functional Linux system on hand.
+`Raspberry Pi OS Lite (either 32bit or 64bit)` is a recommended Linux image
+if you are using a Raspberry Pi.
+The [official Raspberry Pi Imager](https://www.raspberrypi.com/software/)
is the simplest way to flash an image like this to an SD card.
* Once you have downloaded, installed and launched the Raspberry Pi Imager,
-select `Choose OS -> Raspberry Pi OS (other)`: \
+ select `Choose OS -> Raspberry Pi OS (other)`: \
+
- 
+ 
-* Then select `Raspberry Pi OS Lite (32bit)` (or 64bit if you want to use that instead):
+* Then select `Raspberry Pi OS Lite (32bit)` (or 64bit if you want to use that
+ instead):
+
- 
+ 
-* Back in the Raspberry Pi Imager's main menu, select the corresponding SD card to which
-you want to flash the image.
+* Back in the Raspberry Pi Imager's main menu, select the corresponding SD card
+ to which
+ you want to flash the image.
-* Make sure to go into the Advanced Option (the cog icon in the lower left corner of the main menu)
-and enable SSH and configure Wi-Fi.
+* Make sure to go into the Advanced Option (the cog icon in the lower left
+ corner of the main menu)
+ and enable SSH and configure Wi-Fi.
-* If you need more help for using the Raspberry Pi Imager, please visit the [official documentation](https://www.raspberrypi.com/documentation/computers/getting-started.html).
+* If you need more help for using the Raspberry Pi Imager, please visit
+ the [official documentation](https://www.raspberrypi.com/documentation/computers/getting-started.html).
-These steps **only** apply if you are actually using a Raspberry Pi. In case you want
-to use a different SBC (like an Orange Pi or any other Pi derivates), please look up on how to get an appropriate Linux image flashed
-to the SD card before proceeding further (usually done with Balena Etcher in those cases). Also make sure that KIAUH will be able to run
-and operate on the Linux Distribution you are going to flash. You likely will have the most success with
-distributions based on Debian 11 Bullseye. Read the notes further down below in this document.
+These steps **only** apply if you are actually using a Raspberry Pi. In case you
+want
+to use a different SBC (like an Orange Pi or any other Pi derivates), please
+look up on how to get an appropriate Linux image flashed
+to the SD card before proceeding further (usually done with Balena Etcher in
+those cases). Also make sure that KIAUH will be able to run
+and operate on the Linux Distribution you are going to flash. You likely will
+have the most success with
+distributions based on Debian 11 Bullseye. Read the notes further down below in
+this document.
### 💾 Download and use KIAUH
+
**📢 Disclaimer: Usage of this script happens at your own risk!**
* **Step 1:** \
-To download this script, it is necessary to have git installed. If you don't have git already installed, or if you are unsure, run the following command:
+ To download this script, it is necessary to have git installed. If you don't
+ have git already installed, or if you are unsure, run the following command:
+
```shell
sudo apt-get update && sudo apt-get install git -y
```
* **Step 2:** \
-Once git is installed, use the following command to download KIAUH into your home-directory:
+ Once git is installed, use the following command to download KIAUH into your
+ home-directory:
```shell
cd ~ && git clone https://github.com/dw-0/kiauh.git
```
* **Step 3:** \
-Finally, start KIAUH by running the next command:
+ Finally, start KIAUH by running the next command:
```shell
./kiauh/kiauh.sh
```
* **Step 4:** \
-You should now find yourself in the main menu of KIAUH. You will see several actions to choose from depending
-on what you want to do. To choose an action, simply type the corresponding number into the "Perform action"
-prompt and confirm by hitting ENTER.
+ You should now find yourself in the main menu of KIAUH. You will see several
+ actions to choose from depending
+ on what you want to do. To choose an action, simply type the corresponding
+ number into the "Perform action"
+ prompt and confirm by hitting ENTER.
❗ Notes ❗
-### **📋 Please see the [Changelog](docs/changelog.md) for possible important changes!**
+### **📋 Please see the [Changelog](docs/changelog.md) for possible important
+
+changes!**
- Mainly tested on Raspberry Pi OS Lite (Debian 10 Buster / Debian 11 Bullseye)
- Other Debian based distributions (like Ubuntu 20 to 22) likely work too
- Reported to work on Armbian as well but not tested in detail
-- During the use of this script you will be asked for your sudo password. There are several functions involved which need sudo privileges.
+- During the use of this script you will be asked for your sudo password. There
+ are several functions involved which need sudo privileges.
@@ -200,13 +223,17 @@ prompt and confirm by hitting ENTER.
✨ Credits ✨
-* A big thank you to [lixxbox](https://github.com/lixxbox) for that awesome KIAUH-Logo!
-* Also, a big thank you to everyone who supported my work with a [Ko-fi](https://ko-fi.com/dw__0) !
-* Last but not least: Thank you to all contributors and members of the Klipper Community who like and share this project!
+* A big thank you to [lixxbox](https://github.com/lixxbox) for that awesome
+ KIAUH-Logo!
+* Also, a big thank you to everyone who supported my work with
+ a [Ko-fi](https://ko-fi.com/dw__0) !
+* Last but not least: Thank you to all contributors and members of the Klipper
+ Community who like and share this project!
-A special thank you to JetBrains for sponsoring this project with their incredible software!
+A special thank you to JetBrains for sponsoring this project
+with their incredible software!
diff --git a/docs/assets/logo-large.png b/docs/assets/logo-large.png
new file mode 100644
index 0000000..0135a87
Binary files /dev/null and b/docs/assets/logo-large.png differ
diff --git a/docs/assets/logo.png b/docs/assets/logo.png
new file mode 100644
index 0000000..dadb5e2
Binary files /dev/null and b/docs/assets/logo.png differ
diff --git a/docs/assets/rpi_imager1.png b/docs/assets/rpi_imager1.png
new file mode 100644
index 0000000..1e51b8b
Binary files /dev/null and b/docs/assets/rpi_imager1.png differ
diff --git a/docs/assets/rpi_imager2.png b/docs/assets/rpi_imager2.png
new file mode 100644
index 0000000..9b46e02
Binary files /dev/null and b/docs/assets/rpi_imager2.png differ