diff --git a/scripts/functions.sh b/scripts/functions.sh
index 57f9c9e..3e57619 100755
--- a/scripts/functions.sh
+++ b/scripts/functions.sh
@@ -22,6 +22,7 @@ locate_printer_cfg(){
     PRINTER_CFG=$(while [ "$i" != "$KLIPPY_ARGS_COUNT" ]; do grep -E "(\/[A-Za-z0-9\_-]+)+\/printer\.cfg" /etc/default/klipper | cut -d" " -f"$i"; i=$(( $i + 1 )); done | grep "printer.cfg")
     ok_msg "printer.cfg location: '$PRINTER_CFG'"
   elif [ -e $KLIPPER_SERVICE3 ]; then
+    status_msg "Locating printer.cfg via $KLIPPER_SERVICE3 ..."
     #reads /etc/systemd/system/klipper.service and gets the default printer.cfg location
     KLIPPY_ARGS_LINE="$(grep "ExecStart=" /etc/systemd/system/klipper.service)"
     KLIPPY_ARGS_COUNT="$(grep -o " " <<< "$KLIPPY_ARGS_LINE" | wc -l)"
@@ -260,29 +261,55 @@ install_gcode_shell_command(){
   restart_klipper
 }
 
+create_minimal_cfg(){
+  #create a minimal default config for either moonraker or dwc2
+  if [ "$SEL_DEF_CFG" = "true" ]; then
+		cat <<- EOF >> $PRINTER_CFG
+		[mcu]
+		serial: </dev/serial/by-id/your-mcu>
+
+		[printer]
+		kinematics: cartesian
+		max_velocity: 300
+		max_accel: 3000
+		max_z_velocity: 5
+		max_z_accel: 100
+
+		[virtual_sdcard]
+		path: ~/sdcard
+
+		[pause_resume]
+		[display_status]
+EOF
+  fi
+}
+
 read_printer_cfg(){
   KIAUH_CFG=$(echo $PRINTER_CFG | sed 's/printer/kiauh/')
-  if [ "$1" = "gcode_shell_command" ]; then
-    [ ! -f $KIAUH_CFG ] && KIAUH_CFG_FOUND="false" || KIAUH_CFG_FOUND="true"
-  elif [ "$1" = "moonraker" ]; then
-    [ ! -f $KIAUH_CFG ] && KIAUH_CFG_FOUND="false" || KIAUH_CFG_FOUND="true"
-    [ ! "$(grep '^\[virtual_sdcard\]$' $PRINTER_CFG)" ] && VSD="false"
-    [ ! "$(grep '^\[pause_resume\]$' $PRINTER_CFG)" ] && PAUSE_RESUME="false"
-    [ ! "$(grep '^\[display_status\]$' $PRINTER_CFG)" ] && DISPLAY_STATUS="false"
-  elif [ "$1" = "mainsail" ] || [ "$1" = "fluidd" ]; then
-    [ ! -f $KIAUH_CFG ] && KIAUH_CFG_FOUND="false" || KIAUH_CFG_FOUND="true"
-    [ ! "$(grep '^\[include webui_macros\.cfg\]$' $PRINTER_CFG)" ] && WEBUI_MACROS="false"
+  [ ! -f $KIAUH_CFG ] && KIAUH_CFG_FOUND="false" || KIAUH_CFG_FOUND="true"
+  if [ -f $PRINTER_CFG ]; then
+    if [ "$1" = "moonraker" ]; then
+      [ ! "$(grep '^\[virtual_sdcard\]$' $PRINTER_CFG)" ] && VSD="false" && EDIT_CFG="true"
+      [ ! "$(grep '^\[pause_resume\]$' $PRINTER_CFG)" ] && PAUSE_RESUME="false" && EDIT_CFG="true"
+      [ ! "$(grep '^\[display_status\]$' $PRINTER_CFG)" ] && DISPLAY_STATUS="false" && EDIT_CFG="true"
+    elif [ "$1" = "mainsail" ] || [ "$1" = "fluidd" ]; then
+      [ ! "$(grep '^\[include webui_macros\.cfg\]$' $PRINTER_CFG)" ] && WEBUI_MACROS="false" && EDIT_CFG="true"
+    elif [ "$1" = "dwc2" ]; then
+      [ ! "$(grep '^\[virtual_sdcard\]$' $PRINTER_CFG)" ] && VSD="false" && EDIT_CFG="true"
+    fi
   fi
 }
 
 write_printer_cfg(){
+  #backup printer.cfg if edits will be written
+  [ "$EDIT_CFG" = "true" ] && backup_printer_cfg
   #create kiauh.cfg if its needed and doesn't exist
-  if [ "$KIAUH_CFG_FOUND" = "false" ]; then
+  if [ "$KIAUH_CFG_FOUND" = "false" ] && [ "$EDIT_CFG" = "true" ]; then
     status_msg "Creating kiauh.cfg ..."
     echo -e "##### AUTOCREATED BY KIAUH #####" > $KIAUH_CFG
   fi
   #write each entry to kiauh.cfg if it doesn't exist
-  #Moonraker related config options
+  #Moonraker/DWC2 related config options
   if [ "$VSD" = "false" ] && [[ ! $(grep '^\[virtual_sdcard\]$' $KIAUH_CFG) ]]; then
     echo -e "\n[virtual_sdcard]\npath: ~/sdcard" >> $KIAUH_CFG
   fi
@@ -309,9 +336,9 @@ write_printer_cfg(){
 EOF
   fi
   #including the kiauh.cfg into printer.cfg if not already done
-  if [ ! "$(grep '^\[include kiauh\.cfg\]$' $PRINTER_CFG)" ]; then
+  if [ ! "$(grep '^\[include kiauh\.cfg\]$' $PRINTER_CFG)" ] && [ "$EDIT_CFG" = "true" ]; then
     status_msg "Writing [include kiauh.cfg] to printer.cfg ..."
-    sed -i '1 i ##### AUTOCREATED BY KIAUH #####\n[include kiauh.cfg]\n################################' $PRINTER_CFG
+    sed -i '1 i ##### AUTOCREATED BY KIAUH #####\n[include kiauh.cfg]' $PRINTER_CFG
   fi
   ok_msg "Done!"
 }
diff --git a/scripts/install_dwc2.sh b/scripts/install_dwc2.sh
index 17e299d..fc267ef 100755
--- a/scripts/install_dwc2.sh
+++ b/scripts/install_dwc2.sh
@@ -10,7 +10,7 @@ install_dwc2(){
     stop_klipper
     dwc2_setup
     #setup config
-    write_printer_cfg_dwc2
+    setup_printer_config_dwc2
     #execute customizations
     disable_octoprint
     set_nginx_cfg "dwc2"
@@ -24,10 +24,9 @@ install_dwc2(){
 
 system_check_dwc2(){
   status_msg "Initializing DWC2 installation ..."
-  check_for_folder_dwc2
   #check for existing printer.cfg
   locate_printer_cfg
-  if [ ! -z $PRINTER_CFG ]; then
+  if [ -f $PRINTER_CFG ]; then
     PRINTER_CFG_FOUND="true"
   else
     PRINTER_CFG_FOUND="false"
@@ -40,31 +39,30 @@ system_check_dwc2(){
 
 get_user_selections_dwc2(){
   #let user choose to install systemd or init.d service
-  unset INST_SYSTEMD
-  unset INST_INITD
   while true; do
     echo
     top_border
     echo -e "| Do you want to install dwc2-for-klipper-socket as     |"
-    echo -e "| 1) Init.d Service                                     |"
+    echo -e "| 1) Init.d Service (default)                           |"
     echo -e "| 2) Systemd Service                                    |"
     hr
     echo -e "| Please use the appropriate option for your chosen     |"
     echo -e "| Linux distribution. If you are unsure what to select, |"
     echo -e "| please do a research before.                          |"
     hr
-    echo -e "| If you are using Raspberry Pi OS, either option 1 or  |"
-    echo -e "| 2 will work.                                          |"
+    echo -e "| If you run Raspberry Pi OS, both options will work.   |"
     bottom_border
     read -p "${cyan}###### Please choose:${default} " action
     case "$action" in
-      1)
-        INST_INITD="true"
-        INST_SYSTEMD="false"
+      1|"")
+        echo -e "###### > 1) Init.d"
+        INST_DWC2_INITD="true"
+        INST_DWC2_SYSTEMD="false"
         break;;
       2)
-        INST_INITD="false"
-        INST_SYSTEMD="true"
+        echo -e "###### > 1) Systemd"
+        INST_DWC2_INITD="false"
+        INST_DWC2_SYSTEMD="true"
         break;;
       *)
         print_unkown_cmd
@@ -73,7 +71,6 @@ get_user_selections_dwc2(){
   done
   #user selection for printer.cfg
   if [ "$PRINTER_CFG_FOUND" = "false" ]; then
-    unset SEL_DEF_CFG
     while true; do
       echo
       top_border
@@ -101,15 +98,12 @@ get_user_selections_dwc2(){
       esac
     done
   fi
-  #
-  setup_printer_config_dwc2
   #ask user to install reverse proxy
   dwc2_reverse_proxy_dialog
   #ask to change hostname
   [ "$SET_NGINX_CFG" = "true" ] && create_custom_hostname
   #ask user to disable octoprint when such installed service was found
   if [ "$OCTOPRINT_ENABLED" = "true" ]; then
-    unset DISABLE_OPRINT
     while true; do
       echo
       warn_msg "OctoPrint service found!"
@@ -138,60 +132,37 @@ get_user_selections_dwc2(){
 #############################################################
 #############################################################
 
-check_for_folder_dwc2(){
-  #check for needed folder
-  if [ ! -d $DWC2_DIR ]; then
-    mkdir -p $DWC2_DIR
-  fi
-}
-
 dwc2_setup(){
   #check dependencies
   dep=(git wget gzip tar curl)
   dependency_check
   #get dwc2-for-klipper
-  cd ${HOME}
   status_msg "Cloning DWC2-for-Klipper-Socket repository ..."
-  git clone $DWC2FK_REPO
+  cd ${HOME} && git clone $DWC2FK_REPO
   ok_msg "DWC2-for-Klipper successfully cloned!"
   #copy installers from kiauh srcdir to dwc-for-klipper-socket
   status_msg "Copy installers to $DWC2FK_DIR"
   cp -r ${SRCDIR}/kiauh/scripts/dwc2-for-klipper-socket-installer $DWC2FK_DIR/scripts
   ok_msg "Done!"
   status_msg "Starting service-installer ..."
-  if [ "$INST_INITD" = "true" ] && [ "$INST_SYSTEMD" = "false" ]; then
+  if [ "$INST_DWC2_INITD" = "true" ]; then
     $DWC2FK_DIR/scripts/install-octopi.sh
-  elif [ "$INST_INITD" = "false" ] && [ "$INST_SYSTEMD" = "true" ]; then
+  elif [ "$INST_DWC2_SYSTEMD" = "true" ]; then
     $DWC2FK_DIR/scripts/install-debian.sh
   fi
   ok_msg "Service installed!"
   #patch /etc/default/klipper to append the uds argument
-  patch_klipper_sysfile_dwc2
+  patch_klipper_sysfile "dwc2"
   #download Duet Web Control
   download_dwc2_webui
 }
 
-patch_klipper_sysfile_dwc2(){
-  status_msg "Checking /etc/default/klipper for necessary entries ..."
-  #patching new UDS argument to /etc/default/klipper
-  if ! grep -q -- "-a /tmp/klippy_uds" $KLIPPER_SERVICE2; then
-    status_msg "Patching unix domain socket to /etc/default/klipper ..."
-    #append the new argument to /tmp/klippy.log argument
-    sudo sed -i "/KLIPPY_ARGS/s/\.log/\.log -a \/tmp\/klippy_uds/" $KLIPPER_SERVICE2
-    ok_msg "Patching done!"
-  else
-    ok_msg "No patching needed!"
-  fi
-  ok_msg "Check complete!"
-  echo
-}
-
 download_dwc2_webui(){
   #get Duet Web Control
   GET_DWC2_URL=$(curl -s https://api.github.com/repositories/28820678/releases/latest | grep browser_download_url | cut -d'"' -f4)
-  cd $DWC2_DIR
   status_msg "Downloading DWC2 Web UI ..."
-  wget $GET_DWC2_URL
+  [ ! -d $DWC2_DIR ] && mkdir -p $DWC2_DIR
+  cd $DWC2_DIR && wget $GET_DWC2_URL
   ok_msg "Download complete!"
   status_msg "Unzipping archive ..."
   unzip -q -o *.zip
@@ -214,80 +185,14 @@ download_dwc2_webui(){
 
 setup_printer_config_dwc2(){
   if [ "$PRINTER_CFG_FOUND" = "true" ]; then
-    backup_printer_cfg
     #check printer.cfg for necessary dwc2 entries
-    read_printer_cfg_dwc2
+    read_printer_cfg "dwc2" && write_printer_cfg
   fi
   if [ "$SEL_DEF_CFG" = "true" ]; then
-    create_default_dwc2_printer_cfg
-    locate_printer_cfg
-  fi
-}
-
-read_printer_cfg_dwc2(){
-  unset SC_ENTRY
-  SC="#*# <---------------------- SAVE_CONFIG ---------------------->"
-  if [ ! $(grep '^\[virtual_sdcard\]$' $PRINTER_CFG) ]; then
-    VSD="false"
-  fi
-  #check for a SAVE_CONFIG entry
-  if [[ $(grep "$SC" $PRINTER_CFG) ]]; then
-    SC_LINE=$(grep -n "$SC" $PRINTER_CFG | cut -d ":" -f1)
-    PRE_SC_LINE=$(expr $SC_LINE - 1)
-    SC_ENTRY="true"
-  else
-    SC_ENTRY="false"
-  fi
-}
-
-write_printer_cfg_dwc2(){
-  unset write_entries
-  if [ "$VSD" = "false" ]; then
-    write_entries+=("[virtual_sdcard]\npath: ~/sdcard")
-  fi
-  if [ "${#write_entries[@]}" != "0" ]; then
-    write_entries+=("\\\n############################\n##### CREATED BY KIAUH #####\n############################")
-    write_entries=("############################\n" "${write_entries[@]}")
-  fi
-  #execute writing
-  status_msg "Writing to printer.cfg ..."
-  if [ "$SC_ENTRY" = "true" ]; then
-    PRE_SC_LINE="$(expr $SC_LINE - 1)a"
-    for entry in "${write_entries[@]}"
-    do
-      sed -i "$PRE_SC_LINE $entry" $PRINTER_CFG
-    done
-  fi
-  if [ "$SC_ENTRY" = "false" ]; then
-    LINE_COUNT="$(wc -l < $PRINTER_CFG)a"
-    for entry in "${write_entries[@]}"
-    do
-      sed -i "$LINE_COUNT $entry" $PRINTER_CFG
-    done
-  fi
-  ok_msg "Done!"
-}
-
-create_default_dwc2_printer_cfg(){
-  #create default config
-  if [ "$PRINTER_CFG_FOUND" = "false" ] && [ "$SEL_DEF_CFG" = "true" ]; then
-    touch $PRINTER_CFG
-    cat <<DEFAULT_DWC2_CFG >> $PRINTER_CFG
-##########################
-### CREATED WITH KIAUH ###
-##########################
-[printer]
-kinematics: cartesian
-max_velocity: 300
-max_accel: 3000
-max_z_velocity: 5
-max_z_accel: 100
-
-[virtual_sdcard]
-path: ~/sdcard
-
-##########################
-DEFAULT_DWC2_CFG
+    status_msg "Creating minimal default printer.cfg ..."
+    create_minimal_cfg
+    ok_msg "printer.cfg location: '$PRINTER_CFG'"
+    ok_msg "Done!"
   fi
 }
 
diff --git a/scripts/install_moonraker.sh b/scripts/install_moonraker.sh
index 0bf3543..f7a6a66 100755
--- a/scripts/install_moonraker.sh
+++ b/scripts/install_moonraker.sh
@@ -58,7 +58,6 @@ system_check_moonraker(){
 get_user_selections_moonraker(){
   #user selection for printer.cfg
   if [ "$PRINTER_CFG_FOUND" = "false" ]; then
-    unset SEL_DEF_CFG
     while true; do
       echo
       top_border
@@ -196,10 +195,6 @@ get_user_selections_moonraker(){
       echo -e "| ${red}3) Skip this step (not recommended)${default}                   |"
       bottom_border
       read -p "${cyan}###### Please choose:${default} " action
-      unset REMOVE_HAPROXY
-      unset REMOVE_LIGHTTPD
-      unset DISABLE_HAPROXY
-      unset DISABLE_LIGHTTPD
       case "$action" in
         1)
           echo -e "###### > Remove packages"
@@ -255,7 +250,7 @@ moonraker_setup(){
   #backup a possible existing printer.cfg at the old location
   #and before patching in the new location
   backup_printer_cfg
-  patch_klipper_sysfile
+  patch_klipper_sysfile "moonraker"
   #re-run printer.cfg location function to read the new path for the printer.cfg
   locate_printer_cfg
   echo; ok_msg "Moonraker successfully installed!"
@@ -265,37 +260,45 @@ patch_klipper_sysfile(){
   if [ -e $KLIPPER_SERVICE2 ]; then
     status_msg "Checking /etc/default/klipper for necessary entries ..."
     #patching new printer.cfg location to /etc/default/klipper
-    if ! grep -q "/klipper_config/printer.cfg" $KLIPPER_SERVICE2; then
-      status_msg "Patching new printer.cfg location to /etc/default/klipper ..."
-      sudo sed -i "/KLIPPY_ARGS=/ s|$PRINTER_CFG|/home/${USER}/klipper_config/printer.cfg|" $KLIPPER_SERVICE2
-      ok_msg "New location is: '/home/${USER}/klipper_config/printer.cfg'"
+    if [ "$1" = "moonraker" ]; then
+      if ! grep -q "/klipper_config/printer.cfg" $KLIPPER_SERVICE2; then
+        status_msg "Patching new printer.cfg location to /etc/default/klipper ..."
+        sudo sed -i "/KLIPPY_ARGS=/ s|$PRINTER_CFG|/home/${USER}/klipper_config/printer.cfg|" $KLIPPER_SERVICE2
+        ok_msg "New location is: '/home/${USER}/klipper_config/printer.cfg'"
+      fi
     fi
     #patching new UDS argument to /etc/default/klipper
-    if ! grep -q -- "-a /tmp/klippy_uds" $KLIPPER_SERVICE2; then
-      status_msg "Patching unix domain socket to /etc/default/klipper ..."
-      #append the new argument to /tmp/klippy.log argument
-      sudo sed -i "/KLIPPY_ARGS/s/\.log/\.log -a \/tmp\/klippy_uds/" $KLIPPER_SERVICE2
-      ok_msg "Patching done!"
+    if [ "$1" = "moonraker" ] || [ "$1" = "dwc2" ]; then
+      if ! grep -q -- "-a /tmp/klippy_uds" $KLIPPER_SERVICE2; then
+        status_msg "Patching unix domain socket to /etc/default/klipper ..."
+        #append the new argument to /tmp/klippy.log argument
+        sudo sed -i "/KLIPPY_ARGS/s/\.log/\.log -a \/tmp\/klippy_uds/" $KLIPPER_SERVICE2
+        ok_msg "Patching done!"
+      fi
     fi
   fi
   if [ -e $KLIPPER_SERVICE3 ]; then
     status_msg "Checking /etc/systemd/system/klipper.service for necessary entries ..."
     #patching new printer.cfg location to /etc/systemd/system/klipper.service
-    if ! grep -q "/klipper_config/printer.cfg" $KLIPPER_SERVICE3; then
-      status_msg "Patching new printer.cfg location to /etc/systemd/system/klipper.service ..."
-      sudo sed -i "/ExecStart=/ s|$PRINTER_CFG|/home/${USER}/klipper_config/printer.cfg|" $KLIPPER_SERVICE3
-      ok_msg "New location is: '/home/${USER}/klipper_config/printer.cfg'"
-      #set variable if file got edited
-      SERVICE_FILE_PATCHED="true"
+    if [ "$1" = "moonraker" ]; then
+      if ! grep -q "/klipper_config/printer.cfg" $KLIPPER_SERVICE3; then
+        status_msg "Patching new printer.cfg location to /etc/systemd/system/klipper.service ..."
+        sudo sed -i "/ExecStart=/ s|$PRINTER_CFG|/home/${USER}/klipper_config/printer.cfg|" $KLIPPER_SERVICE3
+        ok_msg "New location is: '/home/${USER}/klipper_config/printer.cfg'"
+        #set variable if file got edited
+        SERVICE_FILE_PATCHED="true"
+      fi
     fi
     #patching new UDS argument to /etc/systemd/system/klipper.service
-    if ! grep -q -- "-a /tmp/klippy_uds" $KLIPPER_SERVICE3; then
-      status_msg "Patching unix domain socket to /etc/systemd/system/klipper.service ..."
-      #append the new argument to /tmp/klippy.log argument
-      sudo sed -i "/ExecStart/s/\.log/\.log -a \/tmp\/klippy_uds/" $KLIPPER_SERVICE3
-      ok_msg "Patching done!"
-      #set variable if file got edited
-      SERVICE_FILE_PATCHED="true"
+    if [ "$1" = "moonraker" ] || [ "$1" = "dwc2" ]; then
+      if ! grep -q -- "-a /tmp/klippy_uds" $KLIPPER_SERVICE3; then
+        status_msg "Patching unix domain socket to /etc/systemd/system/klipper.service ..."
+        #append the new argument to /tmp/klippy.log argument
+        sudo sed -i "/ExecStart/s/\.log/\.log -a \/tmp\/klippy_uds/" $KLIPPER_SERVICE3
+        ok_msg "Patching done!"
+        #set variable if file got edited
+        SERVICE_FILE_PATCHED="true"
+      fi
     fi
     #reloading the units is only needed when the service file was patched.
     [ "$SERVICE_FILE_PATCHED" = "true" ] && status_msg "Reloading unit ..." && sudo systemctl daemon-reload
@@ -324,9 +327,7 @@ check_for_folder_moonraker(){
 
 setup_printer_config_moonraker(){
   if [ "$PRINTER_CFG_FOUND" = "true" ]; then
-    backup_printer_cfg
-    #copy printer.cfg to new location if
-    #there is no printer.cfg at the new location already
+    #copy printer.cfg to new location if there is no printer.cfg at the new location already
     if [ -f ${HOME}/printer.cfg ] && [ ! -f ${HOME}/klipper_config/printer.cfg ]; then
       status_msg "Copy printer.cfg to new location ..."
       cp ${HOME}/printer.cfg $PRINTER_CFG
@@ -334,12 +335,11 @@ setup_printer_config_moonraker(){
       ok_msg "Done!"
     fi
     #check printer.cfg for necessary moonraker entries
-    read_printer_cfg "moonraker"
-    write_printer_cfg
+    read_printer_cfg "moonraker" && write_printer_cfg
   fi
   if [ "$SEL_DEF_CFG" = "true" ]; then
     status_msg "Creating minimal default printer.cfg ..."
-    create_default_moonraker_printer_cfg
+    create_minimal_cfg
     ok_msg "printer.cfg location: '$PRINTER_CFG'"
     ok_msg "Done!"
   fi
@@ -357,7 +357,6 @@ setup_moonraker_conf(){
   #check for at least one trusted client in an already existing moonraker.conf
   #in no entry is found, write default trusted client
   if [ "$MOONRAKER_CONF_FOUND" = "true" ]; then
-    backup_moonraker_conf
     if grep "trusted_clients:" ${HOME}/moonraker.conf -q; then
       TC_LINE=$(grep -n "trusted_clients:" ${HOME}/moonraker.conf | cut -d ":" -f1)
       FIRST_IP_LINE=$(expr $TC_LINE + 1)
@@ -365,7 +364,7 @@ setup_moonraker_conf(){
       #if [[ ! $FIRST_IP =~ ([0-9].[0-9].[0-9].[0-9]) ]]; then
       if [ "$FIRST_IP" = "" ]; then
         status_msg "Writing trusted clients to config ..."
-        write_default_trusted_clients
+        backup_moonraker_conf && write_default_trusted_clients
         ok_msg "Trusted clients written!"
       fi
     fi
@@ -384,19 +383,6 @@ setup_moonraker_nginx_cfg(){
 #############################################################
 #############################################################
 
-create_default_moonraker_printer_cfg(){
-#create default config
-touch ${HOME}/klipper_config/printer.cfg
-cat <<DEFAULT_CFG >> ${HOME}/klipper_config/printer.cfg
-### AUTOCREATED WITH KIAUH ###
-[virtual_sdcard]
-path: ~/sdcard
-
-[pause_resume]
-[display_status]
-DEFAULT_CFG
-}
-
 write_default_trusted_clients(){
   DEFAULT_IP=$(hostname -I)
   status_msg "Your devices current IP adress is:\n${cyan}● $DEFAULT_IP ${default}"
@@ -537,21 +523,4 @@ handle_haproxy_lighttpd(){
       ok_msg "Lighttpd removed!"
     fi
   fi
-}
-
-#############################################################
-#############################################################
-
-#test_api(){
-#  HOST_IP=$(hostname -I | cut -d" " -f1)
-#  status_msg "Testing API ..."
-#  status_msg "Please wait ..."
-#  sleep 15
-#  status_msg "API response from http://"$HOST_IP":7125/printer/info :"
-#  echo -e "${cyan}$(curl -s "http://"$HOST_IP":7125/printer/info")${default}"
-#  if [ $(curl -s "http://"$HOST_IP":7125/printer/info" | grep '^{"result"' -c) -eq 1 ]; then
-#    echo; ok_msg "Klipper API is working correctly!"; echo
-#  else
-#    echo; warn_msg "Klipper API not working correctly!"; echo
-#  fi
-#}
\ No newline at end of file
+}
\ No newline at end of file