diff --git a/resources/mainsail_macros.cfg b/resources/mainsail_macros.cfg
index ec2f76e..f89deda 100644
--- a/resources/mainsail_macros.cfg
+++ b/resources/mainsail_macros.cfg
@@ -1,13 +1,39 @@
 ##########################
 ### CREATED WITH KIAUH ###
 ##########################
+#is required to load the pause_resume module in klipper
 [pause_resume]
 
+[gcode_macro PAUSE]
+rename_existing: BASE_PAUSE
+default_parameter_X: 230    #edit to your park position
+default_parameter_Y: 230    #edit to your park position
+default_parameter_Z: 10     #edit to your park position
+default_parameter_E: 1      #edit to your retract length
+gcode:
+    SAVE_GCODE_STATE NAME=PAUSE_state
+    BASE_PAUSE
+    G91
+    G1 E-{E} F2100
+    G1 Z{Z}
+    G90
+    G1 X{X} Y{Y} F6000
+
+[gcode_macro RESUME]
+rename_existing: BASE_RESUME
+default_parameter_E: 1      #edit to your retract length
+gcode:
+    G91
+    G1 E{E} F2100
+    G90
+    RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
+    BASE_RESUME
+
 [gcode_macro CANCEL_PRINT]
 rename_existing: BASE_CANCEL_PRINT
-default_parameter_X: 230
-default_parameter_Y: 230
-default_parameter_Z: 10
+default_parameter_X: 230    #edit to your park position
+default_parameter_Y: 230    #edit to your park position
+default_parameter_Z: 10     #edit to your park position
 gcode:
     M104 S0
     M140 S0
@@ -16,28 +42,5 @@ gcode:
     CLEAR_PAUSE
     SDCARD_RESET_FILE
     BASE_CANCEL_PRINT
-
-[gcode_macro PAUSE]
-rename_existing: BASE_PAUSE
-default_parameter_X: 230
-default_parameter_Y: 230
-default_parameter_Z: 10
-gcode:
-    SAVE_GCODE_STATE NAME=PAUSE_state
-    BASE_PAUSE
-    G91
-    G1 E-1.7 F2100
-    G1 Z{Z}
-    G90
-    G1 X{X} Y{Y} F6000
-
-[gcode_macro RESUME]
-rename_existing: BASE_RESUME
-gcode:
-    G91
-    G1 E1.7 F2100
-    G91
-    RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
-    BASE_RESUME
 ##########################
-##########################
\ No newline at end of file
+##########################