Squashed 'kiauh/core/submodules/simple_config_parser/' content from commit 90081a6

git-subtree-dir: kiauh/core/submodules/simple_config_parser
git-subtree-split: 90081a6539ec38adf6a1a5bb707a0e9934567c7f

tests/line_matching/match_section/test_data/matching_data.txt

@@ -0,0 +1,127 @@
+[example_section]
+[gcode_macro CANCEL_PRINT]
+[gcode_macro SET_PAUSE_NEXT_LAYER]
+[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+[update_manager moonraker-obico]
+[include moonraker_obico_macros.cfg]
+[include moonraker-obico-update.cfg]
+[example_section two]
+[valid_content]
+[valid content]
+[content123]
+[a]
+[valid_content] # comment
+[something];comment
+[mcu]
+[printer]
+[printer]
+[stepper_x]
+[stepper_y]
+[stepper_z]
+[printer]
+[stepper_a]
+[stepper_b]
+[stepper_c]
+[delta_calibrate]
+[printer]
+[stepper_left]
+[stepper_right]
+[stepper_bed]
+[stepper_arm]
+[delta_calibrate]
+[extruder]
+[heater_bed]
+[bed_mesh]
+[bed_tilt]
+[bed_screws]
+[screws_tilt_adjust]
+[z_tilt]
+[quad_gantry_level]
+[skew_correction]
+[z_thermal_adjust]
+[safe_z_home]
+[homing_override]
+[endstop_phase stepper_z]
+[gcode_macro my_cmd]
+[delayed_gcode my_delayed_gcode]
+[save_variables]
+[idle_timeout]
+[virtual_sdcard]
+[sdcard_loop]
+[force_move]
+[pause_resume]
+[firmware_retraction]
+[gcode_arcs]
+[respond]
+[exclude_object]
+[input_shaper]
+[adxl345]
+[lis2dw]
+[mpu9250 my_accelerometer]
+[resonance_tester]
+[board_pins my_aliases]
+[duplicate_pin_override]
+[probe]
+[bltouch]
+[smart_effector]
+[probe_eddy_current my_eddy_probe]
+[axis_twist_compensation]
+[stepper_z1]
+[extruder1]
+[dual_carriage]
+[extruder_stepper my_extra_stepper]
+[manual_stepper my_stepper]
+[verify_heater heater_config_name]
+[homing_heaters]
+[thermistor my_thermistor]
+[adc_temperature my_sensor]
+[heater_generic my_generic_heater]
+[temperature_sensor my_sensor]
+[temperature_probe my_probe]
+[fan]
+[heater_fan heatbreak_cooling_fan]
+[controller_fan my_controller_fan]
+[temperature_fan my_temp_fan]
+[fan_generic extruder_partfan]
+[led my_led]
+[neopixel my_neopixel]
+[dotstar my_dotstar]
+[pca9533 my_pca9533]
+[pca9632 my_pca9632]
+[servo my_servo]
+[gcode_button my_gcode_button]
+[output_pin my_pin]
+[pwm_tool my_tool]
+[pwm_cycle_time my_pin]
+[static_digital_output my_output_pins]
+[multi_pin my_multi_pin]
+[tmc2130 stepper_x]
+[tmc2208 stepper_x]
+[tmc2209 stepper_x]
+[tmc2660 stepper_x]
+[tmc2240 stepper_x]
+[tmc5160 stepper_x]
+[ad5206 my_digipot]
+[mcp4451 my_digipot]
+[mcp4728 my_dac]
+[mcp4018 my_digipot]
+[display]
+[display_data my_group_name my_data_name]
+[display_template my_template_name]
+[display_glyph my_display_glyph]
+[menu __some_list __some_name]
+[menu some_name]
+[menu some_list]
+[menu some_list some_command]
+[menu some_list some_input]
+[filament_switch_sensor my_sensor]
+[filament_motion_sensor my_sensor]
+[tsl1401cl_filament_width_sensor]
+[hall_filament_width_sensor]
+[load_cell]
+[sx1509 my_sx1509]
+[samd_sercom my_sercom]
+[adc_scaled my_name]
+[replicape]
+[palette2]
+[angle my_angle_sensor]

tests/line_matching/match_section/test_data/non_matching_data.txt

@@ -0,0 +1,19 @@
+section: invalid
+not_a_valid_section
+[missing_square_bracket
+missing_square_bracket]
+[]
+[ ]
+  [indented_section]
+           [indented_section]  # comment
+       [indented_section]  ; comment
+;[commented_section]
+#[another_commented_section]
+; [commented_section]
+# [another_commented_section]
+this_is_an_option: 123
+  this_is_an_indented_option: 123
+this_is_an_option_block_start:
+
+#
+;

tests/line_matching/match_section/test_match_section.py

@@ -0,0 +1,39 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from pathlib import Path
+
+import pytest
+
+from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from tests.utils import load_testdata_from_file
+
+BASE_DIR = Path(__file__).parent.joinpath("test_data")
+MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
+NON_MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("non_matching_data.txt")
+
+
+@pytest.fixture
+def parser():
+    return SimpleConfigParser()
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(MATCHING_TEST_DATA_PATH))
+def test_match_section(parser, line):
+    """Test that a line matches the definition of a section"""
+    assert (
+        parser._match_section(line) is True
+    ), f"Expected line '{line}' to match section definition!"
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(NON_MATCHING_TEST_DATA_PATH))
+def test_non_matching_section(parser, line):
+    """Test that a line does not match the definition of a section"""
+    assert (
+        parser._match_section(line) is False
+    ), f"Expected line '{line}' to not match section definition!"