Squashed 'kiauh/core/submodules/simple_config_parser/' content from commit 90081a6

git-subtree-dir: kiauh/core/submodules/simple_config_parser
git-subtree-split: 90081a6539ec38adf6a1a5bb707a0e9934567c7f

tests/assets/test_config_1.cfg

@@ -0,0 +1,32 @@
+# a comment at the very top
+# should be treated as the file header
+
+# up to the first section, including all blank lines
+
+[section_1]
+option_1: value_1
+option_1_1: True # this is a boolean
+option_1_2: 5 ; this is an integer
+option_1_3: 1.123 #;this is a float
+
+[section_2] ; comment
+option_2: value_2
+
+; comment
+
+[section_3]
+option_3: value_3 # comment
+
+[section_4]
+# comment
+option_4: value_4
+
+[section number 5]
+#option_5: value_5
+option_5 = this.is.value-5
+multi_option:
+  # these are multi-line values
+  value_5_1
+  value_5_2 ; here is a comment
+  value_5_3
+option_5_1: value_5_1

tests/assets/test_config_2.cfg

@@ -0,0 +1,33 @@
+# a comment at the very top
+# should be treated as the file header
+
+# up to the first section, including all blank lines
+
+[section_1]
+option_1: value_1
+option_1_1: True # this is a boolean
+option_1_2: 5 ; this is an integer
+option_1_3: 1.123 #;this is a float
+
+[section_2] ; comment
+option_2: value_2
+
+; comment
+
+[section_3]
+option_3: value_3 # comment
+
+[section_4]
+# comment
+option_4: value_4
+
+[section number 5]
+#option_5: value_5
+option_5 = this.is.value-5
+multi_option:
+  # these are multi-line values
+  value_5_1
+  value_5_2 ; here is a comment
+  value_5_3
+option_5_1: value_5_1
+# config ending with a comment

tests/assets/test_config_3.cfg

@@ -0,0 +1,94 @@
+# a comment at the very top
+# should be treated as the file header
+
+# up to the first section, including all blank lines
+
+[section_1]
+option_1: value_1
+option_1_1: True # this is a boolean
+option_1_2: 5 ; this is an integer
+option_1_3: 1.123 #;this is a float
+
+[section_2] ; comment
+option_2: value_2
+
+; comment
+
+[section_3]
+option_3: value_3 # comment
+
+[section_4]
+# comment
+option_4: value_4
+
+[section number 5]
+#option_5: value_5
+option_5 = this.is.value-5
+multi_option:
+  # these are multi-line values
+  value_5_1
+  value_5_2 ; here is a comment
+  value_5_3
+option_5_1: value_5_1
+
+[gcode_macro M117]
+rename_existing: M117.1
+gcode:
+  {% if rawparams %}
+    {% set escaped_msg = rawparams.split(';', 1)[0].split('\x23', 1)[0]|replace('"', '\\"') %}
+    SET_DISPLAY_TEXT MSG="{escaped_msg}"
+    RESPOND TYPE=command MSG="{escaped_msg}"
+  {% else %}
+    SET_DISPLAY_TEXT
+  {% endif %}
+
+# SDCard 'looping' (aka Marlin M808 commands) support
+#
+# Support SDCard looping
+[sdcard_loop]
+[gcode_macro M486]
+gcode:
+  # Parameters known to M486 are as follows:
+  #   [C<flag>] Cancel the current object
+  #   [P<index>] Cancel the object with the given index
+  #   [S<index>] Set the index of the current object.
+  #       If the object with the given index has been canceled, this will cause
+  #       the firmware to skip to the next object. The value -1 is used to
+  #       indicate something that isn’t an object and shouldn’t be skipped.
+  #   [T<count>] Reset the state and set the number of objects
+  #   [U<index>] Un-cancel the object with the given index. This command will be
+  #       ignored if the object has already been skipped
+
+  {% if 'exclude_object' not in printer %}
+    {action_raise_error("[exclude_object] is not enabled")}
+  {% endif %}
+
+  {% if 'T' in params %}
+    EXCLUDE_OBJECT RESET=1
+
+    {% for i in range(params.T | int) %}
+      EXCLUDE_OBJECT_DEFINE NAME={i}
+    {% endfor %}
+  {% endif %}
+
+  {% if 'C' in params %}
+    EXCLUDE_OBJECT CURRENT=1
+  {% endif %}
+
+  {% if 'P' in params %}
+    EXCLUDE_OBJECT NAME={params.P}
+  {% endif %}
+
+  {% if 'S' in params %}
+    {% if params.S == '-1' %}
+      {% if printer.exclude_object.current_object %}
+        EXCLUDE_OBJECT_END NAME={printer.exclude_object.current_object}
+      {% endif %}
+    {% else %}
+      EXCLUDE_OBJECT_START NAME={params.S}
+    {% endif %}
+  {% endif %}
+
+  {% if 'U' in params %}
+    EXCLUDE_OBJECT RESET=1 NAME={params.U}
+  {% endif %}

tests/line_matching/match_empty_line/test_data/matching_data.txt

@@ -0,0 +1,6 @@
+
+
+
+
+
+

tests/line_matching/match_empty_line/test_data/non_matching_data.txt

@@ -0,0 +1,7 @@
+not_empty
+[also_not_empty]
+#
+;
+ ;
+  #
+option: value

tests/line_matching/match_empty_line/test_match_empty_line.py

@@ -0,0 +1,39 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from pathlib import Path
+
+import pytest
+
+from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from tests.utils import load_testdata_from_file
+
+BASE_DIR = Path(__file__).parent.joinpath("test_data")
+MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
+NON_MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("non_matching_data.txt")
+
+
+@pytest.fixture
+def parser():
+    return SimpleConfigParser()
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(MATCHING_TEST_DATA_PATH))
+def test_match_line_comment(parser, line):
+    """Test that a line matches the definition of a line comment"""
+    assert (
+        parser._match_empty_line(line) is True
+    ), f"Expected line '{line}' to match line comment definition!"
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(NON_MATCHING_TEST_DATA_PATH))
+def test_non_matching_line_comment(parser, line):
+    """Test that a line does not match the definition of a line comment"""
+    assert (
+        parser._match_empty_line(line) is False
+    ), f"Expected line '{line}' to not match line comment definition!"

tests/line_matching/match_line_comment/test_data/matching_data.txt

@@ -0,0 +1,28 @@
+;[example_section]
+#[example_section]
+# [example_section]
+; [example_section]
+;[gcode_macro CANCEL_PRINT]
+#[gcode_macro CANCEL_PRINT]
+# [gcode_macro CANCEL_PRINT]
+; [gcode_macro CANCEL_PRINT]
+;[gcode_macro SET_PAUSE_NEXT_LAYER]
+#[gcode_macro SET_PAUSE_NEXT_LAYER]
+# [gcode_macro SET_PAUSE_NEXT_LAYER]
+; [gcode_macro SET_PAUSE_NEXT_LAYER]
+;[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+#[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+# [gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+; [gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+ ;[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+ #[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+ # [gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+ ; [gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+  ;[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+  #[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+  # [gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+  ; [gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+   ;[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+   #[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+   # [gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+   ; [gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]

tests/line_matching/match_line_comment/test_data/non_matching_data.txt

@@ -0,0 +1,5 @@
+not_a_comment: nono
+
+[also not a comment]
+not_a_comment: ; comment
+not_a_comment: # comment

tests/line_matching/match_line_comment/test_match_line_comment.py

@@ -0,0 +1,39 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from pathlib import Path
+
+import pytest
+
+from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from tests.utils import load_testdata_from_file
+
+BASE_DIR = Path(__file__).parent.joinpath("test_data")
+MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
+NON_MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("non_matching_data.txt")
+
+
+@pytest.fixture
+def parser():
+    return SimpleConfigParser()
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(MATCHING_TEST_DATA_PATH))
+def test_match_line_comment(parser, line):
+    """Test that a line matches the definition of a line comment"""
+    assert (
+        parser._match_line_comment(line) is True
+    ), f"Expected line '{line}' to match line comment definition!"
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(NON_MATCHING_TEST_DATA_PATH))
+def test_non_matching_line_comment(parser, line):
+    """Test that a line does not match the definition of a line comment"""
+    assert (
+        parser._match_line_comment(line) is False
+    ), f"Expected line '{line}' to not match line comment definition!"

tests/line_matching/match_option/test_data/matching_data.txt

@@ -0,0 +1,461 @@
+baud: 250000
+minimum_cruise_ratio: 0.5
+square_corner_velocity: 5.0
+full_steps_per_rotation: 200
+position_min: 0
+homing_speed: 5.0
+homing_retract_dist: 5.0
+kinematics: cartesian
+kinematics: delta
+minimum_z_position: 0
+speed: 50
+horizontal_move_z: 5
+kinematics: deltesian
+minimum_z_position: 0
+min_angle: 5
+slow_ratio: 3
+kinematics: corexy
+kinematics: corexz
+kinematics: hybrid_corexy
+kinematics: hybrid_corexz
+kinematics: polar
+kinematics: rotary_delta
+minimum_z_position: 0
+speed: 50
+horizontal_move_z: 5
+kinematics: winch
+kinematics: none
+max_velocity: 1
+max_accel: 1
+instantaneous_corner_velocity: 1.000
+max_extrude_only_distance: 50.0
+pressure_advance: 0.0
+pressure_advance_smooth_time: 0.040
+max_power: 1.0
+pullup_resistor: 4700
+smooth_time: 1.0
+max_delta: 2.0
+pwm_cycle_time: 0.100
+min_extrude_temp: 170
+speed: 50
+horizontal_move_z: 5
+probe_count: 3, 3
+round_probe_count: 5
+fade_start: 1.0
+fade_end: 0.0
+split_delta_z: .025
+move_check_distance: 5.0
+mesh_pps: 2, 2
+algorithm: lagrange
+bicubic_tension: .2
+x_adjust: 0
+y_adjust: 0
+z_adjust: 0
+speed: 50
+horizontal_move_z: 5
+horizontal_move_z: 5
+probe_height: 0
+speed: 50
+probe_speed: 5
+speed: 50
+horizontal_move_z: 5
+screw_thread: CW-M3
+speed: 50
+horizontal_move_z: 5
+retries: 0
+retry_tolerance: 0
+speed: 50
+horizontal_move_z: 5
+max_adjust: 4
+retries: 0
+retry_tolerance: 0
+speed: 50.0
+z_hop_speed: 15.0
+move_to_previous: False
+axes: xyz
+endstop_align_zero: False
+description: G-Code macro
+initial_duration: 0.0
+timeout: 600
+enable_force_move: False
+recover_velocity: 50.
+retract_length: 0
+retract_speed: 20
+unretract_extra_length: 0
+unretract_speed: 10
+resolution: 1.0
+default_type: echo
+default_prefix: echo:
+shaper_freq_x: 0
+shaper_freq_y: 0
+shaper_type: mzv
+damping_ratio_x: 0.1
+damping_ratio_y: 0.1
+spi_speed: 5000000
+axes_map: x, y, z
+rate: 3200
+spi_speed: 5000000
+axes_map: x, y, z
+i2c_speed: 400000
+axes_map: x, y, z
+min_freq: 5
+max_freq: 133.33
+accel_per_hz: 75
+hz_per_sec: 1
+mcu: mcu
+deactivate_on_each_sample: True
+x_offset: 0.0
+y_offset: 0.0
+speed: 5.0
+samples: 1
+sampleretract_dist: 2.0
+samples_result: average
+samples_tolerance: 0.100
+samples_toleranceretries: 0
+pin_move_time: 0.680
+stow_on_each_sample: True
+probe_with_touch_mode: False
+pin_up_reports_not_triggered: True
+pin_up_touch_modereports_triggered: True
+recovery_time: 0.4
+sensor_type: ldc1612
+speed: 50
+horizontal_move_z: 5
+calibrate_start_x: 20
+calibrate_end_x: 200
+calibrate_y: 112.5
+max_error: 120
+hysteresis: 5
+heating_gain: 2
+extruder_heating_z: 50.
+max_validation_temp: 60.
+pullup_resistor: 4700
+inlineresistor: 0
+adc_voltage: 5.0
+voltage_offset: 0
+sensor_type: PT1000
+pullup_resistor: 4700
+spi_speed: 4000000
+tc_type: K
+tc_use_50Hz_filter: False
+tc_averaging_count: 1
+rtd_nominal_r: 100
+rtd_referencer: 430
+rtd_num_of_wires: 2
+rtd_use_50Hz_filter: False
+sensor_type: BME280
+sensor_type: AHT10
+sensor_type: temperature_mcu
+sensor_mcu: mcu
+sensor_type: temperature_host
+sensor_type: DS18B20
+sensor_type: temperature_combined
+max_power: 1.0
+shutdown_speed: 0
+cycle_time: 0.010
+hardware_pwm: False
+kick_start_time: 0.100
+off_below: 0.0
+tachometer_ppr: 2
+tachometer_poll_interval: 0.0015
+heater: extruder
+heater_temp: 50.0
+fan_speed: 1.0
+fan_speed: 1.0
+pid_deriv_time: 2.0
+target_temp: 40.0
+max_speed: 1.0
+min_speed: 0.3
+cycle_time: 0.010
+hardware_pwm: False
+initial_RED: 0.0
+initial_GREEN: 0.0
+initial_BLUE: 0.0
+initial_WHITE: 0.0
+color_order: GRB
+initial_RED: 0.0
+initial_GREEN: 0.0
+initial_BLUE: 0.0
+initial_WHITE: 0.0
+initial_RED: 0.0
+initial_GREEN: 0.0
+initial_BLUE: 0.0
+i2c_address: 98
+initial_RED: 0.0
+initial_GREEN: 0.0
+initial_BLUE: 0.0
+initial_WHITE: 0.0
+i2c_address: 98
+color_order: RGBW
+initial_RED: 0.0
+initial_GREEN: 0.0
+initial_BLUE: 0.0
+initial_WHITE: 0.0
+maximum_servo_angle: 180
+minimum_pulse_width: 0.001
+maximum_pulse_width: 0.002
+pwm: False
+cycle_time: 0.100
+hardware_pwm: False
+cycle_time: 0.100
+hardware_pwm: False
+cycle_time: 0.100
+interpolate: True
+senseresistor: 0.110
+stealthchop_threshold: 0
+driver_MSLUT0: 2863314260
+driver_MSLUT1: 1251300522
+driver_MSLUT2: 608774441
+driver_MSLUT3: 269500962
+driver_MSLUT4: 4227858431
+driver_MSLUT5: 3048961917
+driver_MSLUT6: 1227445590
+driver_MSLUT7: 4211234
+driver_W0: 2
+driver_W1: 1
+driver_W2: 1
+driver_W3: 1
+driver_X1: 128
+driver_X2: 255
+driver_X3: 255
+driver_START_SIN: 0
+driver_START_SIN90: 247
+driver_IHOLDDELAY: 8
+driver_TPOWERDOWN: 0
+driver_TBL: 1
+driver_TOFF: 4
+driver_HEND: 7
+driver_HSTRT: 0
+driver_VHIGHFS: 0
+driver_VHIGHCHM: 0
+driver_PWM_AUTOSCALE: True
+driver_PWM_FREQ: 1
+driver_PWM_GRAD: 4
+driver_PWM_AMPL: 128
+driver_SGT: 0
+driver_SEMIN: 0
+driver_SEUP: 0
+driver_SEMAX: 0
+driver_SEDN: 0
+driver_SEIMIN: 0
+driver_SFILT: 0
+interpolate: True
+sense_resistor: 0.110
+stealthchop_threshold: 0
+driver_MULTISTEP_FILT: True
+driver_IHOLDDELAY: 8
+driver_TPOWERDOWN: 20
+driver_TBL: 2
+driver_TOFF: 3
+driver_HEND: 0
+driver_HSTRT: 5
+driver_PWM_AUTOGRAD: True
+driver_PWM_AUTOSCALE: True
+driver_PWM_LIM: 12
+driver_PWM_REG: 8
+driver_PWM_FREQ: 1
+driver_PWM_GRAD: 14
+driver_PWM_OFS: 36
+interpolate: True
+sense_resistor: 0.110
+stealthchop_threshold: 0
+driver_MULTISTEP_FILT: True
+driver_IHOLDDELAY: 8
+driver_TPOWERDOWN: 20
+driver_TBL: 2
+driver_TOFF: 3
+driver_HEND: 0
+driver_HSTRT: 5
+driver_PWM_AUTOGRAD: True
+driver_PWM_AUTOSCALE: True
+driver_PWM_LIM: 12
+driver_PWM_REG: 8
+driver_PWM_FREQ: 1
+driver_PWM_GRAD: 14
+driver_PWM_OFS: 36
+driver_SGTHRS: 0
+driver_SEMIN: 0
+driver_SEUP: 0
+driver_SEMAX: 0
+driver_SEDN: 0
+driver_SEIMIN: 0
+spi_speed: 4000000
+interpolate: True
+idle_current_percent: 100
+driver_TBL: 2
+driver_RNDTF: 0
+driver_HDEC: 0
+driver_CHM: 0
+driver_HEND: 3
+driver_HSTRT: 3
+driver_TOFF: 4
+driver_SEIMIN: 0
+driver_SEDN: 0
+driver_SEMAX: 0
+driver_SEUP: 0
+driver_SEMIN: 0
+driver_SFILT: 0
+driver_SGT: 0
+driver_SLPH: 0
+driver_SLPL: 0
+driver_DISS2G: 0
+driver_TS2G: 3
+interpolate: True
+rref: 12000
+stealthchop_threshold: 0
+driver_MSLUT0: 2863314260
+driver_MSLUT1: 1251300522
+driver_MSLUT2: 608774441
+driver_MSLUT3: 269500962
+driver_MSLUT4: 4227858431
+driver_MSLUT5: 3048961917
+driver_MSLUT6: 1227445590
+driver_MSLUT7: 4211234
+driver_W0: 2
+driver_W1: 1
+driver_W2: 1
+driver_W3: 1
+driver_X1: 128
+driver_X2: 255
+driver_X3: 255
+driver_START_SIN: 0
+driver_START_SIN90: 247
+driver_OFFSET_SIN90: 0
+driver_MULTISTEP_FILT: True
+driver_IHOLDDELAY: 6
+driver_IRUNDELAY: 4
+driver_TPOWERDOWN: 10
+driver_TBL: 2
+driver_TOFF: 3
+driver_HEND: 2
+driver_HSTRT: 5
+driver_FD3: 0
+driver_TPFD: 4
+driver_CHM: 0
+driver_VHIGHFS: 0
+driver_VHIGHCHM: 0
+driver_DISS2G: 0
+driver_DISS2VS: 0
+driver_PWM_AUTOSCALE: True
+driver_PWM_AUTOGRAD: True
+driver_PWM_FREQ: 0
+driver_FREEWHEEL: 0
+driver_PWM_GRAD: 0
+driver_PWM_OFS: 29
+driver_PWM_REG: 4
+driver_PWM_LIM: 12
+driver_SGT: 0
+driver_SEMIN: 0
+driver_SEUP: 0
+driver_SEMAX: 0
+driver_SEDN: 0
+driver_SEIMIN: 0
+driver_SFILT: 0
+driver_SG4_ANGLE_OFFSET: 1
+interpolate: True
+sense_resistor: 0.075
+stealthchop_threshold: 0
+driver_MSLUT0: 2863314260
+driver_MSLUT1: 1251300522
+driver_MSLUT2: 608774441
+driver_MSLUT3: 269500962
+driver_MSLUT4: 4227858431
+driver_MSLUT5: 3048961917
+driver_MSLUT6: 1227445590
+driver_MSLUT7: 4211234
+driver_W0: 2
+driver_W1: 1
+driver_W2: 1
+driver_W3: 1
+driver_X1: 128
+driver_X2: 255
+driver_X3: 255
+driver_START_SIN: 0
+driver_START_SIN90: 247
+driver_MULTISTEP_FILT: True
+driver_IHOLDDELAY: 6
+driver_TPOWERDOWN: 10
+driver_TBL: 2
+driver_TOFF: 3
+driver_HEND: 2
+driver_HSTRT: 5
+driver_FD3: 0
+driver_TPFD: 4
+driver_CHM: 0
+driver_VHIGHFS: 0
+driver_VHIGHCHM: 0
+driver_DISS2G: 0
+driver_DISS2VS: 0
+driver_PWM_AUTOSCALE: True
+driver_PWM_AUTOGRAD: True
+driver_PWM_FREQ: 0
+driver_FREEWHEEL: 0
+driver_PWM_GRAD: 0
+driver_PWM_OFS: 30
+driver_PWM_REG: 4
+driver_PWM_LIM: 12
+driver_SGT: 0
+driver_SEMIN: 0
+driver_SEUP: 0
+driver_SEMAX: 0
+driver_SEDN: 0
+driver_SEIMIN: 0
+driver_SFILT: 0
+driver_DRVSTRENGTH: 0
+driver_BBMCLKS: 4
+driver_BBMTIME: 0
+driver_FILT_ISENSE: 0
+i2c_address: 96
+analog_pullup_resistor: 4700
+lcd_type: hd44780
+hd44780_protocol_init: True
+lcd_type: hd44780_spi
+hd44780_protocol_init: True
+lcd_type: st7920
+lcd_type: emulated_st7920
+lcd_type: uc1701
+vcomh: 0
+invert: False
+x_offset: 0
+type: disabled
+type: list
+type: command
+type: input
+pause_on_runout: True
+event_delay: 3.0
+pause_delay: 0.5
+detection_length: 7.0
+default_nominal_filament_diameter: 1.75
+max_difference: 0.2
+measurement_delay: 100
+cal_dia1: 1.50
+cal_dia2: 2.00
+raw_dia1: 9500
+raw_dia2: 10500
+default_nominal_filament_diameter: 1.75
+max_difference: 0.200
+measurement_delay: 70
+enable: False
+measurement_interval: 10
+logging: False
+min_diameter: 1.0
+use_current_dia_while_delay: False
+sensor_type: hx711
+gain: A-128
+sample_rate: 80
+sensor_type: hx717
+gain: A-128
+sample_rate: 320
+sensor_type: ads1220
+spi_speed: 512000
+gain: 128
+sample_rate: 660
+smooth_time: 2.0
+enable_pin: !gpio0_20
+standstill_power_down: False
+baud: 115200
+feedrate_splice: 0.8
+feedrate_normal: 1.0
+auto_load_speed: 2
+auto_cancel_variation: 0.1
+sample_period: 0.000400

tests/line_matching/match_option/test_data/non_matching_data.txt

@@ -0,0 +1,37 @@
+[section]
+[section with spaces]
+[section with spaces and comments] ; comment 1
+[section with spaces and comments] # comment 2
+ indented_option: value
+option_with_no_value:
+another_option_with_no_value:
+ indented_option_with_no_value:
+# position_min: 0
+# homing_speed: 5.0
+
+### this is a comment
+; this is also a comment
+# [section]
+# [section with spaces]
+# [section with spaces and comments] ; comment 1
+;[section]
+;[section with spaces]
+;[section with spaces and comments] ; comment 1
+# commented_option: value
+#commented_option: value
+;commented_option: value
+; commented_option: value
+#
+;
+option_1 :: value
+option_1:: value
+option_1 ::value
+option_2 == value
+option_2== value
+option_2 ==value
+option_1 := value
+option_1:= value
+option_1 :=value
+option_2 := value
+option_2:= value
+option_2 :=value

tests/line_matching/match_option/test_match_option.py

@@ -0,0 +1,39 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from pathlib import Path
+
+import pytest
+
+from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from tests.utils import load_testdata_from_file
+
+BASE_DIR = Path(__file__).parent.joinpath("test_data")
+MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
+NON_MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("non_matching_data.txt")
+
+
+@pytest.fixture
+def parser():
+    return SimpleConfigParser()
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(MATCHING_TEST_DATA_PATH))
+def test_match_option(parser, line):
+    """Test that a line matches the definition of an option"""
+    assert (
+        parser._match_option(line) is True
+    ), f"Expected line '{line}' to match option definition!"
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(NON_MATCHING_TEST_DATA_PATH))
+def test_non_matching_option(parser, line):
+    """Test that a line does not match the definition of an option"""
+    assert (
+        parser._match_option(line) is False
+    ), f"Expected line '{line}' to not match option definition!"

tests/line_matching/match_option_block_start/test_data/matching_data.txt

@@ -0,0 +1,15 @@
+trusted_clients:
+gcode:
+cors_domains:
+an_options_block_start_with_comment: ; this is a comment
+an_options_block_start_with_comment: # this is a comment
+options_block_start_with_comment:;this is a comment
+options_block_start_with_comment :;this is a comment
+options_block_start_with_comment:#this is a comment
+options_block_start_with_comment :#this is a comment
+parameter_temperature_(°C):
+parameter_temperature_(°C)=
+parameter_humidity_(%_RH):
+parameter_humidity_(%_RH) :
+parameter_spool_weight_(%):
+parameter_spool_weight_(%) =

tests/line_matching/match_option_block_start/test_data/non_matching_data.txt

@@ -0,0 +1,31 @@
+type: jsonfile
+path: /dev/shm/drying_box.json
+baud: 250000
+minimum_cruise_ratio: 0.5
+square_corner_velocity: 5.0
+full_steps_per_rotation: 200
+position_min: 0
+homing_speed: 5.0
+# baud: 250000
+# minimum_cruise_ratio: 0.5
+# square_corner_velocity: 5.0
+# full_steps_per_rotation: 200
+# position_min: 0
+# homing_speed: 5.0
+
+### this is a comment
+; this is also a comment
+;
+#
+homing_speed::
+homing_speed::
+homing_speed ::
+homing_speed ::
+homing_speed==
+homing_speed==
+homing_speed ==
+homing_speed ==
+homing_speed :=
+homing_speed :=
+homing_speed =:
+homing_speed =:

tests/line_matching/match_option_block_start/test_match_options_block_start.py

@@ -0,0 +1,39 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from pathlib import Path
+
+import pytest
+
+from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from tests.utils import load_testdata_from_file
+
+BASE_DIR = Path(__file__).parent.joinpath("test_data")
+MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
+NON_MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("non_matching_data.txt")
+
+
+@pytest.fixture
+def parser():
+    return SimpleConfigParser()
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(MATCHING_TEST_DATA_PATH))
+def test_match_options_block_start(parser, line):
+    """Test that a line matches the definition of an options block start"""
+    assert (
+        parser._match_options_block_start(line) is True
+    ), f"Expected line '{line}' to match options block start definition!"
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(NON_MATCHING_TEST_DATA_PATH))
+def test_non_matching_options_block_start(parser, line):
+    """Test that a line does not match the definition of an options block start"""
+    assert (
+        parser._match_options_block_start(line) is False
+    ), f"Expected line '{line}' to not match options block start definition!"

tests/line_matching/match_section/test_data/matching_data.txt

@@ -0,0 +1,127 @@
+[example_section]
+[gcode_macro CANCEL_PRINT]
+[gcode_macro SET_PAUSE_NEXT_LAYER]
+[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
+[update_manager moonraker-obico]
+[include moonraker_obico_macros.cfg]
+[include moonraker-obico-update.cfg]
+[example_section two]
+[valid_content]
+[valid content]
+[content123]
+[a]
+[valid_content] # comment
+[something];comment
+[mcu]
+[printer]
+[printer]
+[stepper_x]
+[stepper_y]
+[stepper_z]
+[printer]
+[stepper_a]
+[stepper_b]
+[stepper_c]
+[delta_calibrate]
+[printer]
+[stepper_left]
+[stepper_right]
+[stepper_bed]
+[stepper_arm]
+[delta_calibrate]
+[extruder]
+[heater_bed]
+[bed_mesh]
+[bed_tilt]
+[bed_screws]
+[screws_tilt_adjust]
+[z_tilt]
+[quad_gantry_level]
+[skew_correction]
+[z_thermal_adjust]
+[safe_z_home]
+[homing_override]
+[endstop_phase stepper_z]
+[gcode_macro my_cmd]
+[delayed_gcode my_delayed_gcode]
+[save_variables]
+[idle_timeout]
+[virtual_sdcard]
+[sdcard_loop]
+[force_move]
+[pause_resume]
+[firmware_retraction]
+[gcode_arcs]
+[respond]
+[exclude_object]
+[input_shaper]
+[adxl345]
+[lis2dw]
+[mpu9250 my_accelerometer]
+[resonance_tester]
+[board_pins my_aliases]
+[duplicate_pin_override]
+[probe]
+[bltouch]
+[smart_effector]
+[probe_eddy_current my_eddy_probe]
+[axis_twist_compensation]
+[stepper_z1]
+[extruder1]
+[dual_carriage]
+[extruder_stepper my_extra_stepper]
+[manual_stepper my_stepper]
+[verify_heater heater_config_name]
+[homing_heaters]
+[thermistor my_thermistor]
+[adc_temperature my_sensor]
+[heater_generic my_generic_heater]
+[temperature_sensor my_sensor]
+[temperature_probe my_probe]
+[fan]
+[heater_fan heatbreak_cooling_fan]
+[controller_fan my_controller_fan]
+[temperature_fan my_temp_fan]
+[fan_generic extruder_partfan]
+[led my_led]
+[neopixel my_neopixel]
+[dotstar my_dotstar]
+[pca9533 my_pca9533]
+[pca9632 my_pca9632]
+[servo my_servo]
+[gcode_button my_gcode_button]
+[output_pin my_pin]
+[pwm_tool my_tool]
+[pwm_cycle_time my_pin]
+[static_digital_output my_output_pins]
+[multi_pin my_multi_pin]
+[tmc2130 stepper_x]
+[tmc2208 stepper_x]
+[tmc2209 stepper_x]
+[tmc2660 stepper_x]
+[tmc2240 stepper_x]
+[tmc5160 stepper_x]
+[ad5206 my_digipot]
+[mcp4451 my_digipot]
+[mcp4728 my_dac]
+[mcp4018 my_digipot]
+[display]
+[display_data my_group_name my_data_name]
+[display_template my_template_name]
+[display_glyph my_display_glyph]
+[menu __some_list __some_name]
+[menu some_name]
+[menu some_list]
+[menu some_list some_command]
+[menu some_list some_input]
+[filament_switch_sensor my_sensor]
+[filament_motion_sensor my_sensor]
+[tsl1401cl_filament_width_sensor]
+[hall_filament_width_sensor]
+[load_cell]
+[sx1509 my_sx1509]
+[samd_sercom my_sercom]
+[adc_scaled my_name]
+[replicape]
+[palette2]
+[angle my_angle_sensor]

tests/line_matching/match_section/test_data/non_matching_data.txt

@@ -0,0 +1,19 @@
+section: invalid
+not_a_valid_section
+[missing_square_bracket
+missing_square_bracket]
+[]
+[ ]
+  [indented_section]
+           [indented_section]  # comment
+       [indented_section]  ; comment
+;[commented_section]
+#[another_commented_section]
+; [commented_section]
+# [another_commented_section]
+this_is_an_option: 123
+  this_is_an_indented_option: 123
+this_is_an_option_block_start:
+
+#
+;

tests/line_matching/match_section/test_match_section.py

@@ -0,0 +1,39 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+from pathlib import Path
+
+import pytest
+
+from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from tests.utils import load_testdata_from_file
+
+BASE_DIR = Path(__file__).parent.joinpath("test_data")
+MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("matching_data.txt")
+NON_MATCHING_TEST_DATA_PATH = BASE_DIR.joinpath("non_matching_data.txt")
+
+
+@pytest.fixture
+def parser():
+    return SimpleConfigParser()
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(MATCHING_TEST_DATA_PATH))
+def test_match_section(parser, line):
+    """Test that a line matches the definition of a section"""
+    assert (
+        parser._match_section(line) is True
+    ), f"Expected line '{line}' to match section definition!"
+
+
+@pytest.mark.parametrize("line", load_testdata_from_file(NON_MATCHING_TEST_DATA_PATH))
+def test_non_matching_section(parser, line):
+    """Test that a line does not match the definition of a section"""
+    assert (
+        parser._match_section(line) is False
+    ), f"Expected line '{line}' to not match section definition!"

tests/line_parsing/test_line_parsing.py

@@ -0,0 +1,62 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from pathlib import Path
+
+import pytest
+
+from src.simple_config_parser.constants import HEADER_IDENT
+from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from tests.utils import load_testdata_from_file
+
+BASE_DIR = Path(__file__).parent.parent.joinpath("assets")
+TEST_DATA_PATH = BASE_DIR.joinpath("test_config_1.cfg")
+
+
+@pytest.fixture
+def parser():
+    parser = SimpleConfigParser()
+    for line in load_testdata_from_file(TEST_DATA_PATH):
+        parser._parse_line(line)  # noqa
+
+    return parser
+
+
+def test_section_parsing(parser):
+    expected_keys = {"section_1", "section_2", "section_3", "section_4"}
+    assert expected_keys.issubset(
+        parser.config.keys()
+    ), f"Expected keys: {expected_keys}, got: {parser.config.keys()}"
+    assert parser.in_option_block is False
+    assert parser.current_section == parser.get_sections()[-1]
+    assert parser.config["section_2"]["_raw"] == "[section_2] ; comment"
+
+
+def test_option_parsing(parser):
+    assert parser.config["section_1"]["option_1"]["value"] == "value_1"
+    assert parser.config["section_1"]["option_1"]["_raw"] == "option_1: value_1"
+    assert parser.config["section_3"]["option_3"]["value"] == "value_3"
+    assert (
+        parser.config["section_3"]["option_3"]["_raw"] == "option_3: value_3 # comment"
+    )
+
+
+def test_header_parsing(parser):
+    header = parser.config[HEADER_IDENT]
+    assert isinstance(header, list)
+    assert len(header) > 0
+
+
+def test_collector_parsing(parser):
+    section = "section_2"
+    section_content = list(parser.config[section].keys())
+    coll_name = [name for name in section_content if name.startswith("#_")][0]
+    collector = parser.config[section][coll_name]
+    assert collector is not None
+    assert isinstance(collector, list)
+    assert len(collector) > 0
+    assert "; comment" in collector

tests/public_api/conftest.py

@@ -0,0 +1,26 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from pathlib import Path
+
+import pytest
+
+from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from tests.utils import load_testdata_from_file
+
+BASE_DIR = Path(__file__).parent.parent.joinpath("assets")
+CONFIG_FILES = ["test_config_1.cfg", "test_config_2.cfg", "test_config_3.cfg"]
+
+
+@pytest.fixture(params=CONFIG_FILES)
+def parser(request):
+    parser = SimpleConfigParser()
+    file_path = BASE_DIR.joinpath(request.param)
+    for line in load_testdata_from_file(file_path):
+        parser._parse_line(line)  # noqa
+
+    return parser

tests/public_api/test_options_api.py

@@ -0,0 +1,174 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+import pytest
+
+from src.simple_config_parser.simple_config_parser import (
+    NoOptionError,
+    NoSectionError,
+)
+
+
+def test_get_options(parser):
+    expected_options = {
+        "section_1": {"option_1"},
+        "section_2": {"option_2"},
+        "section_3": {"option_3"},
+        "section_4": {"option_4"},
+        "section number 5": {"option_5", "multi_option", "option_5_1"},
+    }
+
+    for section, options in expected_options.items():
+        assert options.issubset(
+            parser.get_options(section)
+        ), f"Expected options: {options} in section: {section}, got: {parser.get_options(section)}"
+        assert "_raw" not in parser.get_options(section)
+        assert all(
+            not option.startswith("#_") for option in parser.get_options(section)
+        )
+
+
+def test_has_option(parser):
+    assert parser.has_option("section_1", "option_1") is True
+    assert parser.has_option("section_1", "option_128") is False
+    # section does not exist:
+    assert parser.has_option("section_128", "option_1") is False
+
+
+def test_getval(parser):
+    # test regular option values
+    assert parser.getval("section_1", "option_1") == "value_1"
+    assert parser.getval("section_3", "option_3") == "value_3"
+    assert parser.getval("section_4", "option_4") == "value_4"
+    assert parser.getval("section number 5", "option_5") == "this.is.value-5"
+    assert parser.getval("section number 5", "option_5_1") == "value_5_1"
+    assert parser.getval("section_2", "option_2") == "value_2"
+
+    # test multiline option values
+    ml_val = parser.getval("section number 5", "multi_option")
+    assert isinstance(ml_val, list)
+    assert len(ml_val) > 0
+
+
+def test_getval_fallback(parser):
+    assert parser.getval("section_1", "option_128", "fallback") == "fallback"
+
+
+def test_getval_exceptions(parser):
+    with pytest.raises(NoSectionError):
+        parser.getval("section_128", "option_1")
+
+    with pytest.raises(NoOptionError):
+        parser.getval("section_1", "option_128")
+
+
+def test_getint(parser):
+    value = parser.getint("section_1", "option_1_2")
+    assert isinstance(value, int)
+
+
+def test_getint_from_val(parser):
+    with pytest.raises(ValueError):
+        parser.getint("section_1", "option_1")
+
+
+def test_getint_from_float(parser):
+    with pytest.raises(ValueError):
+        parser.getint("section_1", "option_1_3")
+
+
+def test_getint_from_boolean(parser):
+    with pytest.raises(ValueError):
+        parser.getint("section_1", "option_1_1")
+
+
+def test_getint_fallback(parser):
+    assert parser.getint("section_1", "option_128", 128) == 128
+
+
+def test_getboolean(parser):
+    value = parser.getboolean("section_1", "option_1_1")
+    assert isinstance(value, bool)
+    assert value is True or value is False
+
+
+def test_getboolean_from_val(parser):
+    with pytest.raises(ValueError):
+        parser.getboolean("section_1", "option_1")
+
+
+def test_getboolean_from_int(parser):
+    with pytest.raises(ValueError):
+        parser.getboolean("section_1", "option_1_2")
+
+
+def test_getboolean_from_float(parser):
+    with pytest.raises(ValueError):
+        parser.getboolean("section_1", "option_1_3")
+
+
+def test_getboolean_fallback(parser):
+    assert parser.getboolean("section_1", "option_128", True) is True
+    assert parser.getboolean("section_1", "option_128", False) is False
+
+
+def test_getfloat(parser):
+    value = parser.getfloat("section_1", "option_1_3")
+    assert isinstance(value, float)
+
+
+def test_getfloat_from_val(parser):
+    with pytest.raises(ValueError):
+        parser.getfloat("section_1", "option_1")
+
+
+def test_getfloat_from_int(parser):
+    value = parser.getfloat("section_1", "option_1_2")
+    assert isinstance(value, float)
+
+
+def test_getfloat_from_boolean(parser):
+    with pytest.raises(ValueError):
+        parser.getfloat("section_1", "option_1_1")
+
+
+def test_getfloat_fallback(parser):
+    assert parser.getfloat("section_1", "option_128", 1.234) == 1.234
+
+
+def test_set_existing_option(parser):
+    parser.set_option("section_1", "new_option", "new_value")
+    assert parser.getval("section_1", "new_option") == "new_value"
+    assert parser.config["section_1"]["new_option"]["_raw"] == "new_option: new_value\n"
+
+    parser.set_option("section_1", "new_option", "new_value_2")
+    assert parser.getval("section_1", "new_option") == "new_value_2"
+    assert (
+        parser.config["section_1"]["new_option"]["_raw"] == "new_option: new_value_2\n"
+    )
+
+
+def test_set_new_option(parser):
+    parser.set_option("new_section", "very_new_option", "very_new_value")
+    assert (
+        parser.has_section("new_section") is True
+    ), f"Expected 'new_section' in {parser.get_sections()}"
+    assert parser.getval("new_section", "very_new_option") == "very_new_value"
+
+    parser.set_option("section_2", "array_option", ["value_1", "value_2", "value_3"])
+    assert parser.getval("section_2", "array_option") == [
+        "value_1",
+        "value_2",
+        "value_3",
+    ]
+    assert parser.config["section_2"]["array_option"]["_raw"] == "array_option:\n"
+
+
+def test_remove_option(parser):
+    parser.remove_option("section_1", "option_1")
+    assert parser.has_option("section_1", "option_1") is False

tests/public_api/test_read_file.py

@@ -0,0 +1,22 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from pathlib import Path
+
+from src.simple_config_parser.simple_config_parser import (
+    SimpleConfigParser,
+)
+
+BASE_DIR = Path(__file__).parent.parent.joinpath("assets")
+TEST_DATA_PATH = BASE_DIR.joinpath("test_config_1.cfg")
+
+
+def test_read_file():
+    parser = SimpleConfigParser()
+    parser.read_file(TEST_DATA_PATH)
+    assert parser.config is not None
+    assert parser.config.keys() is not None

tests/public_api/test_sections_api.py

@@ -0,0 +1,66 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+
+import pytest
+
+from src.simple_config_parser.simple_config_parser import (
+    DuplicateSectionError,
+)
+
+
+def test_get_sections(parser):
+    expected_keys = {
+        "section_1",
+        "section_2",
+        "section_3",
+        "section_4",
+        "section number 5",
+    }
+    assert expected_keys.issubset(
+        parser.get_sections()
+    ), f"Expected keys: {expected_keys}, got: {parser.get_sections()}"
+
+
+def test_has_section(parser):
+    assert parser.has_section("section_1") is True
+    assert parser.has_section("not_available") is False
+
+
+def test_add_section(parser):
+    pre_add_count = len(parser.get_sections())
+    parser.add_section("new_section")
+    parser.add_section("new_section2")
+    assert parser.has_section("new_section") is True
+    assert parser.has_section("new_section2") is True
+    assert len(parser.get_sections()) == pre_add_count + 2
+
+    new_section = parser.config["new_section"]
+    assert isinstance(new_section, dict)
+    assert new_section["_raw"] == "[new_section]\n"
+
+    # this should be the collector, added by the parser before
+    # then second section was added
+    assert list(new_section.keys())[-1].startswith("#_")
+    assert "\n" in new_section[list(new_section.keys())[-1]]
+
+    new_section2 = parser.config["new_section2"]
+    assert isinstance(new_section2, dict)
+    assert new_section2["_raw"] == "[new_section2]\n"
+
+
+def test_add_section_duplicate(parser):
+    with pytest.raises(DuplicateSectionError):
+        parser.add_section("section_1")
+
+
+def test_remove_section(parser):
+    pre_remove_count = len(parser.get_sections())
+    parser.remove_section("section_1")
+    assert parser.has_section("section_1") is False
+    assert len(parser.get_sections()) == pre_remove_count - 1
+    assert "section_1" not in parser.config

tests/public_api/test_write_file.py

@@ -0,0 +1,41 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from pathlib import Path
+
+import pytest
+
+from src.simple_config_parser.simple_config_parser import (
+    SimpleConfigParser,
+)
+
+BASE_DIR = Path(__file__).parent.parent.joinpath("assets")
+TEST_DATA_PATH = BASE_DIR.joinpath("test_config_1.cfg")
+# TEST_DATA_PATH_2 = BASE_DIR.joinpath("test_config_1_write.cfg")
+
+
+def test_write_file_exception():
+    parser = SimpleConfigParser()
+    with pytest.raises(ValueError):
+        parser.write_file(None)  # noqa
+
+
+def test_write_to_file(tmp_path):
+    tmp_file = Path(tmp_path).joinpath("tmp_config.cfg")
+    parser1 = SimpleConfigParser()
+    parser1.read_file(TEST_DATA_PATH)
+    # parser1.write_file(TEST_DATA_PATH_2)
+    parser1.write_file(tmp_file)
+
+    parser2 = SimpleConfigParser()
+    parser2.read_file(tmp_file)
+
+    assert tmp_file.exists()
+    assert parser2.config is not None
+
+    with open(TEST_DATA_PATH, "r") as original, open(tmp_file, "r") as written:
+        assert original.read() == written.read()

tests/utils.py

@@ -0,0 +1,15 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from pathlib import Path
+
+
+def load_testdata_from_file(file_path: Path):
+    """Helper function to load test data from a text file"""
+
+    with open(file_path, "r") as f:
+        return [line.replace("\n", "") for line in f]

tests/value_conversion/test_get_conv.py

@@ -0,0 +1,74 @@
+# ======================================================================= #
+#  Copyright (C) 2024 Dominik Willner <th33xitus@gmail.com>               #
+#                                                                         #
+#  https://github.com/dw-0/simple-config-parser                           #
+#                                                                         #
+#  This file may be distributed under the terms of the GNU GPLv3 license  #
+# ======================================================================= #
+from pathlib import Path
+
+import pytest
+
+from src.simple_config_parser.simple_config_parser import SimpleConfigParser
+from tests.utils import load_testdata_from_file
+
+BASE_DIR = Path(__file__).parent.parent.joinpath("assets")
+TEST_DATA_PATH = BASE_DIR.joinpath("test_config_1.cfg")
+
+
+@pytest.fixture
+def parser():
+    parser = SimpleConfigParser()
+    for line in load_testdata_from_file(TEST_DATA_PATH):
+        parser._parse_line(line)  # noqa
+
+    return parser
+
+
+def test_get_conv(parser):
+    # Test conversion to int
+    should_be_int = parser._get_conv("section_1", "option_1_2", int)
+    assert isinstance(should_be_int, int)
+
+    # Test conversion to float
+    should_be_float = parser._get_conv("section_1", "option_1_3", float)
+    assert isinstance(should_be_float, float)
+
+    # Test conversion to boolean
+    should_be_bool = parser._get_conv(
+        "section_1", "option_1_1", parser._convert_to_boolean
+    )
+    assert isinstance(should_be_bool, bool)
+
+    # Test fallback for int
+    should_be_fallback_int = parser._get_conv(
+        "section_1", "option_128", int, fallback=128
+    )
+    assert isinstance(should_be_fallback_int, int)
+    assert should_be_fallback_int == 128
+
+    # Test fallback for float
+    should_be_fallback_float = parser._get_conv(
+        "section_1", "option_128", float, fallback=1.234
+    )
+    assert isinstance(should_be_fallback_float, float)
+    assert should_be_fallback_float == 1.234
+
+    # Test fallback for boolean
+    should_be_fallback_bool = parser._get_conv(
+        "section_1", "option_128", parser._convert_to_boolean, fallback=True
+    )
+    assert isinstance(should_be_fallback_bool, bool)
+    assert should_be_fallback_bool is True
+
+    # Test ValueError exception for invalid int conversion
+    with pytest.raises(ValueError):
+        parser._get_conv("section_1", "option_1", int)
+
+    # Test ValueError exception for invalid float conversion
+    with pytest.raises(ValueError):
+        parser._get_conv("section_1", "option_1", float)
+
+    # Test ValueError exception for invalid boolean conversion
+    with pytest.raises(ValueError):
+        parser._get_conv("section_1", "option_1", parser._convert_to_boolean)