Release v6.0.0-alpha.14

fixes #607
fixes #615
fixes #618
fixes #619
fixes #620
fixes #623
fixes #627

kiauh/components/crowsnest/crowsnest.py

@@ -27,7 +27,6 @@ from components.crowsnest import (
 )
 from components.klipper.klipper import Klipper
 from core.backup_manager.backup_manager import BackupManager
-from core.constants import CURRENT_USER
 from core.logger import DialogType, Logger
 from core.settings.kiauh_settings import KiauhSettings
 from core.types.component_status import ComponentStatus
@@ -73,7 +72,7 @@ def install_crowsnest() -> None:
     Logger.print_info("Installer will prompt you for sudo password!")
     try:
         run(
-            f"sudo make install BASE_USER={CURRENT_USER}",
+            f"sudo make install",
             cwd=CROWSNEST_DIR,
             shell=True,
             check=True,

kiauh/components/klipper/__init__.py

@@ -25,6 +25,7 @@ KLIPPER_SERVICE_NAME = "klipper.service"
 
 # directories
 KLIPPER_DIR = Path.home().joinpath("klipper")
+KLIPPER_KCONFIGS_DIR = Path.home().joinpath("klipper-kconfigs")
 KLIPPER_ENV_DIR = Path.home().joinpath("klippy-env")
 KLIPPER_BACKUP_DIR = BACKUP_ROOT_DIR.joinpath("klipper-backups")
 

kiauh/components/klipper_firmware/firmware_utils.py

@@ -7,6 +7,7 @@
 #  This file may be distributed under the terms of the GNU GPLv3 license  #
 # ======================================================================= #
 import re
+from pathlib import Path
 from subprocess import (
     DEVNULL,
     PIPE,
@@ -138,6 +139,7 @@ def start_flash_process(flash_options: FlashOptions) -> None:
         if flash_options.flash_method is FlashMethod.REGULAR:
             cmd = [
                 "make",
+                f"KCONFIG_CONFIG={flash_options.selected_kconfig}",
                 flash_options.flash_command.value,
                 f"FLASH_DEVICE={flash_options.selected_mcu}",
             ]
@@ -165,17 +167,17 @@ def start_flash_process(flash_options: FlashOptions) -> None:
         if rc != 0:
             raise Exception(f"Flashing failed with returncode: {rc}")
         else:
-            Logger.print_ok("Flashing successfull!", start="\n", end="\n\n")
+            Logger.print_ok("Flashing successful!", start="\n", end="\n\n")
 
     except (Exception, CalledProcessError):
         Logger.print_error("Flashing failed!", start="\n")
         Logger.print_error("See the console output above!", end="\n\n")
 
 
-def run_make_clean() -> None:
+def run_make_clean(kconfig=Path(KLIPPER_DIR.joinpath(".config"))) -> None:
     try:
         run(
-            "make clean",
+            f"make KCONFIG_CONFIG={kconfig} clean",
             cwd=KLIPPER_DIR,
             shell=True,
             check=True,
@@ -185,10 +187,10 @@ def run_make_clean() -> None:
         raise
 
 
-def run_make_menuconfig() -> None:
+def run_make_menuconfig(kconfig=Path(KLIPPER_DIR.joinpath(".config"))) -> None:
     try:
         run(
-            "make PYTHON=python3 menuconfig",
+            f"make PYTHON=python3 KCONFIG_CONFIG={kconfig} menuconfig",
             cwd=KLIPPER_DIR,
             shell=True,
             check=True,
@@ -198,10 +200,10 @@ def run_make_menuconfig() -> None:
         raise
 
 
-def run_make() -> None:
+def run_make(kconfig=Path(KLIPPER_DIR.joinpath(".config"))) -> None:
     try:
         run(
-            "make PYTHON=python3",
+            f"make PYTHON=python3 KCONFIG_CONFIG={kconfig}",
             cwd=KLIPPER_DIR,
             shell=True,
             check=True,

kiauh/components/klipper_firmware/flash_options.py

@@ -39,6 +39,7 @@ class FlashOptions:
     _selected_mcu: str = ""
     _selected_board: str = ""
     _selected_baudrate: int = 250000
+    _selected_kconfig: str = ".config"
 
     def __new__(cls, *args, **kwargs):
         if not cls._instance:
@@ -104,3 +105,11 @@ class FlashOptions:
     @selected_baudrate.setter
     def selected_baudrate(self, value: int) -> None:
         self._selected_baudrate = value
+
+    @property
+    def selected_kconfig(self) -> str:
+        return self._selected_kconfig
+
+    @selected_kconfig.setter
+    def selected_kconfig(self, value: str) -> None:
+        self._selected_kconfig = value

kiauh/components/klipper_firmware/menus/klipper_build_menu.py

@@ -9,18 +9,22 @@
 from __future__ import annotations
 
 import textwrap
+from pathlib import Path
+from shutil import copyfile
 from typing import List, Set, Type
 
-from components.klipper import KLIPPER_DIR
+from components.klipper import KLIPPER_DIR, KLIPPER_KCONFIGS_DIR
 from components.klipper_firmware.firmware_utils import (
     run_make,
     run_make_clean,
     run_make_menuconfig,
 )
-from core.logger import Logger
+from components.klipper_firmware.flash_options import FlashOptions
+from core.logger import DialogType, Logger
 from core.menus import Option
 from core.menus.base_menu import BaseMenu
 from core.types.color import Color
+from utils.input_utils import get_confirm, get_string_input
 from utils.sys_utils import (
     check_package_install,
     install_system_packages,
@@ -30,14 +34,25 @@ from utils.sys_utils import (
 
 # noinspection PyUnusedLocal
 # noinspection PyMethodMayBeStatic
-class KlipperBuildFirmwareMenu(BaseMenu):
+class KlipperKConfigMenu(BaseMenu):
     def __init__(self, previous_menu: Type[BaseMenu] | None = None):
         super().__init__()
-        self.title = "Build Firmware Menu"
+        self.title = "Firmware Config Menu"
         self.title_color = Color.CYAN
         self.previous_menu: Type[BaseMenu] | None = previous_menu
-        self.deps: Set[str] = {"build-essential", "dpkg-dev", "make"}
+        self.flash_options = FlashOptions()
-        self.missing_deps: List[str] = check_package_install(self.deps)
+        self.kconfigs_dirname = KLIPPER_KCONFIGS_DIR
+        self.kconfig_default = KLIPPER_DIR.joinpath(".config")
+        self.configs: List[Path] = []
+        self.kconfig = (
+            self.kconfig_default if not Path(self.kconfigs_dirname).is_dir() else None
+        )
+
+    def run(self) -> None:
+        if not self.kconfig:
+            super().run()
+        else:
+            self.flash_options.selected_kconfig = self.kconfig
 
     def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
         from core.menus.advanced_menu import AdvancedMenu
@@ -47,16 +62,107 @@ class KlipperBuildFirmwareMenu(BaseMenu):
         )
 
     def set_options(self) -> None:
-        if len(self.missing_deps) == 0:
+        if not Path(self.kconfigs_dirname).is_dir():
-            self.input_label_txt = "Press ENTER to continue"
+            return
-            self.default_option = Option(method=self.start_build_process)
+
-        else:
+        self.input_label_txt = "Select config or action to continue (default=N)"
-            self.input_label_txt = "Press ENTER to install dependencies"
+        self.default_option = Option(
-            self.default_option = Option(method=self.install_missing_deps)
+            method=self.select_config, opt_data=self.kconfig_default
+        )
+
+        option_index = 1
+        for kconfig in Path(self.kconfigs_dirname).iterdir():
+            if not kconfig.name.endswith(".config"):
+                continue
+            kconfig_path = self.kconfigs_dirname.joinpath(kconfig)
+            if Path(kconfig_path).is_file():
+                self.configs += [kconfig]
+                self.options[str(option_index)] = Option(
+                    method=self.select_config, opt_data=kconfig_path
+                )
+                option_index += 1
+        self.options["n"] = Option(
+            method=self.select_config, opt_data=self.kconfig_default
+        )
 
     def print_menu(self) -> None:
+        cfg_found_str = Color.apply(
+            "Previously saved firmware configs found!", Color.GREEN
+        )
         menu = textwrap.dedent(
+            f"""
+            ╟───────────────────────────────────────────────────────╢
+            ║ {cfg_found_str:^62} ║
+            ║                                                       ║
+            ║    Select an existing config or create a new one.     ║
+            ╟───────────────────────────────────────────────────────╢
+            ║ Available firmware configs:                           ║
             """
+        )[1:]
+
+        start_index = 1
+        for i, s in enumerate(self.configs):
+            line = f"{start_index + i}) {s.name}"
+            menu += f"║ {line:<54}║\n"
+
+        new_config = Color.apply("N) Create new firmware config", Color.GREEN)
+        menu += "║                                                       ║\n"
+        menu += f"║ {new_config:<62} ║\n"
+
+        menu += "╟───────────────────────────────────────────────────────╢\n"
+
+        print(menu, end="")
+
+    def select_config(self, **kwargs) -> None:
+        selection: str | None = kwargs.get("opt_data", None)
+        if selection is None:
+            raise Exception("opt_data is None")
+        if not Path(selection).is_file() and selection != self.kconfig_default:
+            raise Exception("opt_data does not exists")
+        self.kconfig = selection
+
+
+# noinspection PyUnusedLocal
+# noinspection PyMethodMayBeStatic
+class KlipperBuildFirmwareMenu(BaseMenu):
+    def __init__(
+        self, kconfig: str | None = None, previous_menu: Type[BaseMenu] | None = None
+    ):
+        super().__init__()
+        self.title = "Build Firmware Menu"
+        self.title_color = Color.CYAN
+        self.previous_menu: Type[BaseMenu] | None = previous_menu
+        self.deps: Set[str] = {"build-essential", "dpkg-dev", "make"}
+        self.missing_deps: List[str] = check_package_install(self.deps)
+        self.flash_options = FlashOptions()
+        self.kconfigs_dirname = KLIPPER_KCONFIGS_DIR
+        self.kconfig_default = KLIPPER_DIR.joinpath(".config")
+        self.kconfig = self.flash_options.selected_kconfig
+
+    def set_previous_menu(self, previous_menu: Type[BaseMenu] | None) -> None:
+        from core.menus.advanced_menu import AdvancedMenu
+
+        self.previous_menu = (
+            previous_menu if previous_menu is not None else AdvancedMenu
+        )
+
+    def set_options(self) -> None:
+        self.input_label_txt = "Press ENTER to install dependencies"
+        self.default_option = Option(method=self.install_missing_deps)
+
+    def run(self):
+        # immediately start the build process if all dependencies are met
+        if len(self.missing_deps) == 0:
+            self.start_build_process()
+        else:
+            super().run()
+
+    def print_menu(self) -> None:
+        txt = Color.apply("Dependencies are missing!", Color.RED)
+        menu = textwrap.dedent(
+            f"""
+            ╟───────────────────────────────────────────────────────╢
+            ║ {txt:^62} ║
             ╟───────────────────────────────────────────────────────╢
             ║ The following dependencies are required:              ║
             ║                                                       ║
@@ -67,19 +173,11 @@ class KlipperBuildFirmwareMenu(BaseMenu):
             status_ok = Color.apply("*INSTALLED*", Color.GREEN)
             status_missing = Color.apply("*MISSING*", Color.RED)
             status = status_missing if d in self.missing_deps else status_ok
-            padding = 39 - len(d) + len(status) + (len(status_ok) - len(status))
+            padding = 40 - len(d) + len(status) + (len(status_ok) - len(status))
             d = Color.apply(f"● {d}", Color.CYAN)
             menu += f"║ {d}{status:>{padding}} ║\n"
+
         menu += "║                                                       ║\n"
-
-        color = Color.GREEN if len(self.missing_deps) == 0 else Color.RED
-        txt = (
-            "All dependencies are met!"
-            if len(self.missing_deps) == 0
-            else "Dependencies are missing!"
-        )
-
-        menu += f"║ {Color.apply(txt, color):<62} ║\n"
         menu += "╟───────────────────────────────────────────────────────╢\n"
 
         print(menu, end="")
@@ -98,13 +196,16 @@ class KlipperBuildFirmwareMenu(BaseMenu):
 
     def start_build_process(self, **kwargs) -> None:
         try:
-            run_make_clean()
+            run_make_clean(self.kconfig)
-            run_make_menuconfig()
+            run_make_menuconfig(self.kconfig)
-            run_make()
+            run_make(self.kconfig)
 
             Logger.print_ok("Firmware successfully built!")
             Logger.print_ok(f"Firmware file located in '{KLIPPER_DIR}/out'!")
 
+            if self.kconfig == self.kconfig_default:
+                self.save_firmware_config()
+
         except Exception as e:
             Logger.print_error(e)
             Logger.print_error("Building Klipper Firmware failed!")
@@ -112,3 +213,62 @@ class KlipperBuildFirmwareMenu(BaseMenu):
         finally:
             if self.previous_menu is not None:
                 self.previous_menu().run()
+
+    def save_firmware_config(self) -> None:
+        Logger.print_dialog(
+            DialogType.CUSTOM,
+            [
+                "You can save the firmware build configs for multiple MCUs,"
+                " and use them to update the firmware after a Klipper version upgrade"
+            ],
+            custom_title="Save firmware config",
+        )
+        if not get_confirm(
+            "Do you want to save firmware config?", default_choice=False
+        ):
+            return
+
+        filename = self.kconfig_default
+        while True:
+            Logger.print_dialog(
+                DialogType.CUSTOM,
+                [
+                    "Allowed characters: a-z, 0-9 and '-'",
+                    "The name must not contain the following:",
+                    "\n\n",
+                    "● Any special characters",
+                    "● No leading or trailing '-'",
+                ],
+            )
+            input_name = get_string_input(
+                "Enter the new firmware config name",
+                regex=r"^[a-z0-9]+([a-z0-9-]*[a-z0-9])?$",
+            )
+            filename = self.kconfigs_dirname.joinpath(f"{input_name}.config")
+
+            if Path(filename).is_file():
+                if get_confirm(
+                    f"Firmware config {input_name} already exists, overwrite?",
+                    default_choice=False,
+                ):
+                    break
+
+            if Path(filename).is_dir():
+                Logger.print_error(f"Path {filename} exists and it's a directory")
+
+            if not Path(filename).exists():
+                break
+
+        if not get_confirm(
+            f"Save firmware config to '{filename}'?", default_choice=True
+        ):
+            Logger.print_info("Aborted saving firmware config ...")
+            return
+
+        if not Path(self.kconfigs_dirname).exists():
+            Path(self.kconfigs_dirname).mkdir()
+
+        copyfile(self.kconfig_default, filename)
+
+        Logger.print_ok()
+        Logger.print_ok(f"Firmware config successfully saved to {filename}")

kiauh/components/klipper_firmware/menus/klipper_flash_menu.py

@@ -10,6 +10,7 @@ from __future__ import annotations
 
 import textwrap
 import time
+from pathlib import Path
 from typing import Type
 
 from components.klipper_firmware.firmware_utils import (
@@ -420,6 +421,7 @@ class KlipperFlashOverviewMenu(BaseMenu):
         mcu = self.flash_options.selected_mcu.split("/")[-1]
         board = self.flash_options.selected_board
         baudrate = self.flash_options.selected_baudrate
+        kconfig = Path(self.flash_options.selected_kconfig).name
         color = Color.CYAN
         subheader = f"[{Color.apply('Overview', color)}]"
         menu = textwrap.dedent(
@@ -452,6 +454,13 @@ class KlipperFlashOverviewMenu(BaseMenu):
                 """
             )[1:]
 
+        if self.flash_options.flash_method is FlashMethod.REGULAR:
+            menu += textwrap.dedent(
+                f"""
+                ║ Firmware config: {Color.apply(f"{kconfig:<36}", color)} ║
+                """
+            )[1:]
+
         menu += textwrap.dedent(
             """
             ║                                                       ║

kiauh/components/moonraker/moonraker_setup.py

@@ -8,7 +8,6 @@
 # ======================================================================= #
 from __future__ import annotations
 
-import json
 import subprocess
 from typing import List
 
@@ -31,6 +30,7 @@ from components.moonraker.moonraker_dialogs import print_moonraker_overview
 from components.moonraker.moonraker_utils import (
     backup_moonraker_dir,
     create_example_moonraker_conf,
+    parse_sysdeps_file,
 )
 from components.webui_client.client_utils import (
     enable_mainsail_remotemode,
@@ -53,6 +53,8 @@ from utils.sys_utils import (
     cmd_sysctl_manage,
     cmd_sysctl_service,
     create_python_venv,
+    get_distro_name,
+    get_distro_version,
     install_python_requirements,
     parse_packages_from_file,
 )
@@ -157,9 +159,35 @@ def install_moonraker_packages() -> None:
     moonraker_deps = []
 
     if MOONRAKER_DEPS_JSON_FILE.exists():
-        with open(MOONRAKER_DEPS_JSON_FILE, "r") as deps:
+        Logger.print_status(
-            moonraker_deps = json.load(deps).get("debian", [])
+            f"Parsing system dependencies from {MOONRAKER_DEPS_JSON_FILE.name} ..."
+        )
+        parsed_sysdeps = parse_sysdeps_file(MOONRAKER_DEPS_JSON_FILE)
+        distro_name = get_distro_name().lower()
+        distro_version = get_distro_version()
+
+        for dep in parsed_sysdeps.get(distro_name, []):
+            pkg = dep[0].strip()
+            comparator = dep[1].strip()
+            req_version = dep[2].strip()
+
+            comparisons = {
+                "": lambda x, y: True,
+                "<": lambda x, y: x < y,
+                ">": lambda x, y: x > y,
+                "<=": lambda x, y: x <= y,
+                ">=": lambda x, y: x >= y,
+                "==": lambda x, y: x == y,
+                "!=": lambda x, y: x != y,
+            }
+
+            if comparisons[comparator](float(distro_version), float(req_version or 0)):
+                moonraker_deps.append(pkg)
+
     elif MOONRAKER_INSTALL_SCRIPT.exists():
+        Logger.print_status(
+            f"Parsing system dependencies from {MOONRAKER_INSTALL_SCRIPT.name} ..."
+        )
         moonraker_deps = parse_packages_from_file(MOONRAKER_INSTALL_SCRIPT)
 
     if not moonraker_deps:

kiauh/components/moonraker/moonraker_utils.py

@@ -6,9 +6,11 @@
 #                                                                         #
 #  This file may be distributed under the terms of the GNU GPLv3 license  #
 # ======================================================================= #
-
+import json
+import re
 import shutil
-from typing import Dict, List, Optional
+from pathlib import Path
+from typing import Dict, List, Optional, Tuple
 
 from components.moonraker import (
     MODULE_PATH,
@@ -138,3 +140,34 @@ def backup_moonraker_db_dir() -> None:
         bm.backup_directory(
             name, source=instance.db_dir, target=MOONRAKER_DB_BACKUP_DIR
         )
+
+
+# This function is from sync_dependencies.py script from the Moonraker project on GitHub:
+# https://github.com/Arksine/moonraker/blob/master/scripts/sync_dependencies.py
+# Thanks to Arksine for his work on this project!
+def parse_sysdeps_file(sysdeps_file: Path) -> Dict[str, List[Tuple[str, str, str]]]:
+    """
+    Parses the system dependencies file and returns a dictionary with the parsed dependencies.
+    :param sysdeps_file: The path to the system dependencies file.
+    :return: A dictionary with the parsed dependencies in the format {distro: [(package, comparator, version)]}.
+    """
+    base_deps: Dict[str, List[str]] = json.loads(sysdeps_file.read_bytes())
+    parsed_deps: Dict[str, List[Tuple[str, str, str]]] = {}
+
+    for distro, pkgs in base_deps.items():
+        parsed_deps[distro] = []
+        for dep in pkgs:
+            parts = dep.split(";", maxsplit=1)
+            if len(parts) == 1:
+                parsed_deps[distro].append((dep.strip(), "", ""))
+            else:
+                pkg_name = parts[0].strip()
+                dep_parts = re.split(r"(==|!=|<=|>=|<|>)", parts[1].strip())
+                comp_var = dep_parts[0].strip().lower()
+                if len(dep_parts) != 3 or comp_var != "distro_version":
+                    continue
+                operator = dep_parts[1].strip()
+                req_version = dep_parts[2].strip()
+                parsed_deps[distro].append((pkg_name, operator, req_version))
+
+    return parsed_deps

kiauh/components/webui_client/client_setup.py

@@ -144,7 +144,7 @@ def install_client(
         custom_color=Color.GREEN,
         center_content=True,
         content=[
-            f"Open {client.display_name} now on: http://{get_ipv4_addr()}:{port}",
+            f"Open {client.display_name} now on: http://{get_ipv4_addr()}{'' if port == 80 else f':{port}'}",
         ],
     )
 

kiauh/core/menus/advanced_menu.py

@@ -15,6 +15,7 @@ from components.klipper import KLIPPER_DIR
 from components.klipper.klipper import Klipper
 from components.klipper_firmware.menus.klipper_build_menu import (
     KlipperBuildFirmwareMenu,
+    KlipperKConfigMenu,
 )
 from components.klipper_firmware.menus.klipper_flash_menu import (
     KlipperFlashMethodMenu,
@@ -76,12 +77,15 @@ class AdvancedMenu(BaseMenu):
         rollback_repository(MOONRAKER_DIR, Moonraker)
 
     def build(self, **kwargs) -> None:
+        KlipperKConfigMenu().run()
         KlipperBuildFirmwareMenu(previous_menu=self.__class__).run()
 
     def flash(self, **kwargs) -> None:
+        KlipperKConfigMenu().run()
         KlipperFlashMethodMenu(previous_menu=self.__class__).run()
 
     def build_flash(self, **kwargs) -> None:
+        KlipperKConfigMenu().run()
         KlipperBuildFirmwareMenu(previous_menu=KlipperFlashMethodMenu).run()
         KlipperFlashMethodMenu(previous_menu=self.__class__).run()
 

kiauh/procedures/system.py

@@ -31,7 +31,7 @@ def change_system_hostname() -> None:
             "http://<hostname>.local",
             "\n\n",
             "Example: If you set your hostname to 'my-printer', you can access an "
-            "installed webinterface by tyoing 'http://my-printer.local' in the "
+            "installed webinterface by typing 'http://my-printer.local' in the "
             "browser.",
         ],
         custom_title="CHANGE SYSTEM HOSTNAME",

kiauh/utils/sys_utils.py

@@ -539,3 +539,10 @@ def get_service_file_path(instance_type: type, suffix: str) -> Path:
     file_path: Path = SYSTEMD.joinpath(f"{name}.service")
 
     return file_path
+
+def get_distro_name() -> str:
+    return check_output(["lsb_release", "-is"]).decode().strip()
+
+
+def get_distro_version() -> str:
+    return check_output(["lsb_release", "-rs"]).decode().strip()

scripts/crowsnest.sh

@@ -105,7 +105,7 @@ function install_crowsnest(){
   pushd "${HOME}/crowsnest" &> /dev/null || exit 1
   title_msg "Installer will prompt you for sudo password!"
   status_msg "Launching crowsnest installer ..."
-  if ! sudo make install BASE_USER=$USER; then
+  if ! sudo make install; then
     error_msg "Something went wrong! Please try again..."
     exit 1
   fi