feat: added OT options: ignore diag state, auto fault reset, auto diag reset

src/HaHelper.h

@@ -395,7 +395,7 @@ public:
     doc[FPSTR(HA_AVAILABILITY)][FPSTR(HA_TOPIC)] = this->statusTopic.c_str();
     doc[FPSTR(HA_ENABLED_BY_DEFAULT)] = enabledByDefault;
     doc[FPSTR(HA_ENTITY_CATEGORY)] = FPSTR(HA_ENTITY_CATEGORY_DIAGNOSTIC);
-    doc[FPSTR(HA_DEVICE_CLASS)] = F("signal_strength");
+    //doc[FPSTR(HA_DEVICE_CLASS)] = F("signal_strength");
     doc[FPSTR(HA_STATE_CLASS)] = FPSTR(HA_STATE_CLASS_MEASUREMENT);
     doc[FPSTR(HA_UNIT_OF_MEASUREMENT)] = FPSTR(HA_UNIT_OF_MEASUREMENT_PERCENT);
     doc[FPSTR(HA_ICON)] = F("mdi:signal");

src/OpenThermTask.h

@@ -229,7 +229,13 @@ protected:
       vars.slave.flame = CustomOpenTherm::isFlameOn(response);
       vars.slave.cooling = CustomOpenTherm::isCoolingActive(response);
       vars.slave.fault.active = CustomOpenTherm::isFault(response);
-      vars.slave.diag.active = CustomOpenTherm::isDiagnostic(response);
+
+      if (!settings.opentherm.options.ignoreDiagState) {
+        vars.slave.diag.active = CustomOpenTherm::isDiagnostic(response);
+
+      } else if (vars.slave.diag.active) {
+        vars.slave.diag.active = false;
+      }
   
       Log.snoticeln(
         FPSTR(L_OT), F("Received boiler status. Heating: %hhu; DHW: %hhu; flame: %hhu; cooling: %hhu; fault: %hhu; diag: %hhu"),
@@ -342,13 +348,23 @@ protected:
           vars.slave.modulation.min, vars.slave.power.max
         );
         
-        if (settings.opentherm.maxModulation < vars.slave.modulation.min) {
-          settings.opentherm.maxModulation = vars.slave.modulation.min;
+        if (settings.heating.maxModulation < vars.slave.modulation.min) {
+          settings.heating.maxModulation = vars.slave.modulation.min;
           fsSettings.update();
 
           Log.swarningln(
-            FPSTR(L_SETTINGS_OT), F("Updated min modulation: %hhu%%"),
-            settings.opentherm.maxModulation
+            FPSTR(L_SETTINGS_HEATING), F("Updated min modulation: %hhu%%"),
+            settings.heating.maxModulation
+          );
+        }
+
+        if (settings.dhw.maxModulation < vars.slave.modulation.min) {
+          settings.dhw.maxModulation = vars.slave.modulation.min;
+          fsSettings.update();
+
+          Log.swarningln(
+            FPSTR(L_SETTINGS_DHW), F("Updated min modulation: %hhu%%"),
+            settings.dhw.maxModulation
           );
         }
 
@@ -367,29 +383,6 @@ protected:
         Log.swarningln(FPSTR(L_OT), F("Failed receive min modulation and max power"));
       }
 
-      if (!vars.master.heating.enabled && settings.opentherm.options.modulationSyncWithHeating) {
-        if (this->setMaxModulationLevel(0)) {
-          Log.snoticeln(FPSTR(L_OT), F("Set max modulation: 0% (response: %hhu%%)"), vars.slave.modulation.max);
-
-        } else {
-          Log.swarningln(FPSTR(L_OT), F("Failed set max modulation: 0% (response: %hhu%%)"), vars.slave.modulation.max);
-        }
-
-      } else {
-        if (this->setMaxModulationLevel(settings.opentherm.maxModulation)) {
-          Log.snoticeln(
-            FPSTR(L_OT), F("Set max modulation: %hhu%% (response: %hhu%%)"),
-            settings.opentherm.maxModulation, vars.slave.modulation.max
-          );
-
-        } else {
-          Log.swarningln(
-            FPSTR(L_OT), F("Failed set max modulation: %hhu%% (response: %hhu%%)"),
-            settings.opentherm.maxModulation, vars.slave.modulation.max
-          );
-        }
-      }
-
 
       // Get DHW min/max temp (if necessary)
       if (settings.opentherm.options.dhwSupport && settings.opentherm.options.getMinMaxTemp) {
@@ -514,9 +507,42 @@ protected:
         vars.slave.diag.code = 0;
       }
 
+      // Auto fault reset
+      if (settings.opentherm.options.autoFaultReset && vars.slave.fault.active && !vars.actions.resetFault) {
+        vars.actions.resetFault = true;
+      }
+
+      // Auto diag reset
+      if (settings.opentherm.options.autoDiagReset && vars.slave.diag.active && !vars.actions.resetDiagnostic) {
+        vars.actions.resetDiagnostic = true;
+      }
+
       this->prevUpdateNonEssentialVars = millis();
     }
 
+    // Set max modulation level
+    uint8_t targetMaxModulation = vars.slave.modulation.max;
+    if (vars.slave.heating.active) {
+      targetMaxModulation = settings.heating.maxModulation;
+
+    } else if (vars.slave.dhw.active) {
+      targetMaxModulation = settings.dhw.maxModulation;
+    }
+
+    if (vars.slave.modulation.max != targetMaxModulation) {
+      if (this->setMaxModulationLevel(targetMaxModulation)) {
+        Log.snoticeln(
+          FPSTR(L_OT), F("Set max modulation: %hhu%% (response: %hhu%%)"),
+          targetMaxModulation, vars.slave.modulation.max
+        );
+
+      } else {
+        Log.swarningln(
+          FPSTR(L_OT), F("Failed set max modulation: %hhu%% (response: %hhu%%)"),
+          targetMaxModulation, vars.slave.modulation.max
+        );
+      }
+    }
 
     // Update modulation level
     if (

src/Settings.h

@@ -59,7 +59,6 @@ struct Settings {
     byte rxLedGpio = DEFAULT_OT_RX_LED_GPIO;
     uint8_t memberId = 0;
     uint8_t flags = 0;
-    uint8_t maxModulation = 100;
     float minPower = 0.0f;
     float maxPower = 0.0f;
 
@@ -72,9 +71,11 @@ struct Settings {
       bool heatingToCh2 = false;
       bool dhwToCh2 = false;
       bool dhwBlocking = false;
-      bool modulationSyncWithHeating = false;
       bool maxTempSyncWithTargetTemp = true;
       bool getMinMaxTemp = true;
+      bool ignoreDiagState = false;
+      bool autoFaultReset = false;
+      bool autoDiagReset = false;
       bool nativeHeatingControl = false;
       bool immergasFix = false;
     } options;
@@ -104,6 +105,7 @@ struct Settings {
     float turboFactor = 7.5f;
     byte minTemp = DEFAULT_HEATING_MIN_TEMP;
     byte maxTemp = DEFAULT_HEATING_MAX_TEMP;
+    uint8_t maxModulation = 100;
   } heating;
 
   struct {
@@ -111,6 +113,7 @@ struct Settings {
     float target = DEFAULT_DHW_TARGET_TEMP;
     byte minTemp = DEFAULT_DHW_MIN_TEMP;
     byte maxTemp = DEFAULT_DHW_MAX_TEMP;
+    uint8_t maxModulation = 100;
   } dhw;
 
   struct {

src/defines.h

@@ -16,7 +16,7 @@
 
 #define THERMOSTAT_INDOOR_DEFAULT_TEMP  20
 #define THERMOSTAT_INDOOR_MIN_TEMP      5
-#define THERMOSTAT_INDOOR_MAX_TEMP      30
+#define THERMOSTAT_INDOOR_MAX_TEMP      40
 
 #define DEFAULT_NTC_NOMINAL_RESISTANCE  10000.0f
 #define DEFAULT_NTC_NOMINAL_TEMP        25.0f

src/strings.h

@@ -42,6 +42,8 @@ const char S_ANTI_STUCK_TIME[]                      PROGMEM = "antiStuckTime";
 const char S_AP[]                                   PROGMEM = "ap";
 const char S_APP_VERSION[]                          PROGMEM = "appVersion";
 const char S_AUTH[]                                 PROGMEM = "auth";
+const char S_AUTO_DIAG_RESET[]                      PROGMEM = "autoDiagReset";
+const char S_AUTO_FAULT_RESET[]                     PROGMEM = "autoFaultReset";
 const char S_BACKTRACE[]                            PROGMEM = "backtrace";
 const char S_BATTERY[]                              PROGMEM = "battery";
 const char S_BAUDRATE[]                             PROGMEM = "baudrate";
@@ -101,6 +103,7 @@ const char S_HOSTNAME[]                             PROGMEM = "hostname";
 const char S_HUMIDITY[]                             PROGMEM = "humidity";
 const char S_HYSTERESIS[]                           PROGMEM = "hysteresis";
 const char S_ID[]                                   PROGMEM = "id";
+const char S_IGNORE_DIAG_STATE[]                    PROGMEM = "ignoreDiagState";
 const char S_IMMERGAS_FIX[]                         PROGMEM = "immergasFix";
 const char S_INDOOR_TEMP[]                          PROGMEM = "indoorTemp";
 const char S_INDOOR_TEMP_CONTROL[]                  PROGMEM = "indoorTempControl";
@@ -131,7 +134,6 @@ const char S_MIN_POWER[]                            PROGMEM = "minPower";
 const char S_MIN_TEMP[]                             PROGMEM = "minTemp";
 const char S_MODEL[]                                PROGMEM = "model";
 const char S_MODULATION[]                           PROGMEM = "modulation";
-const char S_MODULATION_SYNC_WITH_HEATING[]         PROGMEM = "modulationSyncWithHeating";
 const char S_MQTT[]                                 PROGMEM = "mqtt";
 const char S_NAME[]                                 PROGMEM = "name";
 const char S_NATIVE_HEATING_CONTROL[]               PROGMEM = "nativeHeatingControl";

src/utils.h

@@ -449,7 +449,6 @@ void settingsToJson(const Settings& src, JsonVariant dst, bool safe = false) {
     opentherm[FPSTR(S_RX_LED_GPIO)] = src.opentherm.rxLedGpio;
     opentherm[FPSTR(S_MEMBER_ID)] = src.opentherm.memberId;
     opentherm[FPSTR(S_FLAGS)] = src.opentherm.flags;
-    opentherm[FPSTR(S_MAX_MODULATION)] = src.opentherm.maxModulation;
     opentherm[FPSTR(S_MIN_POWER)] = roundf(src.opentherm.minPower, 2);
     opentherm[FPSTR(S_MAX_POWER)] = roundf(src.opentherm.maxPower, 2);
 
@@ -462,9 +461,11 @@ void settingsToJson(const Settings& src, JsonVariant dst, bool safe = false) {
     otOptions[FPSTR(S_HEATING_TO_CH2)] = src.opentherm.options.heatingToCh2;
     otOptions[FPSTR(S_DHW_TO_CH2)] = src.opentherm.options.dhwToCh2;
     otOptions[FPSTR(S_DHW_BLOCKING)] = src.opentherm.options.dhwBlocking;
-    otOptions[FPSTR(S_MODULATION_SYNC_WITH_HEATING)] = src.opentherm.options.modulationSyncWithHeating;
     otOptions[FPSTR(S_MAX_TEMP_SYNC_WITH_TARGET_TEMP)] = src.opentherm.options.maxTempSyncWithTargetTemp;
     otOptions[FPSTR(S_GET_MIN_MAX_TEMP)] = src.opentherm.options.getMinMaxTemp;
+    otOptions[FPSTR(S_IGNORE_DIAG_STATE)] = src.opentherm.options.ignoreDiagState;
+    otOptions[FPSTR(S_AUTO_FAULT_RESET)] = src.opentherm.options.autoFaultReset;
+    otOptions[FPSTR(S_AUTO_DIAG_RESET)] = src.opentherm.options.autoDiagReset;
     otOptions[FPSTR(S_NATIVE_HEATING_CONTROL)] = src.opentherm.options.nativeHeatingControl;
     otOptions[FPSTR(S_IMMERGAS_FIX)] = src.opentherm.options.immergasFix;
 
@@ -491,12 +492,14 @@ void settingsToJson(const Settings& src, JsonVariant dst, bool safe = false) {
   heating[FPSTR(S_TURBO_FACTOR)] = roundf(src.heating.turboFactor, 3);
   heating[FPSTR(S_MIN_TEMP)] = src.heating.minTemp;
   heating[FPSTR(S_MAX_TEMP)] = src.heating.maxTemp;
+  heating[FPSTR(S_MAX_MODULATION)] = src.heating.maxModulation;
 
   auto dhw = dst[FPSTR(S_DHW)].to<JsonObject>();
   dhw[FPSTR(S_ENABLED)] = src.dhw.enabled;
   dhw[FPSTR(S_TARGET)] = roundf(src.dhw.target, 1);
   dhw[FPSTR(S_MIN_TEMP)] = src.dhw.minTemp;
   dhw[FPSTR(S_MAX_TEMP)] = src.dhw.maxTemp;
+  dhw[FPSTR(S_MAX_MODULATION)] = src.dhw.maxModulation;
 
   auto equitherm = dst[FPSTR(S_EQUITHERM)].to<JsonObject>();
   equitherm[FPSTR(S_ENABLED)] = src.equitherm.enabled;
@@ -811,15 +814,6 @@ bool jsonToSettings(const JsonVariantConst src, Settings& dst, bool safe = false
       }
     }
 
-    if (!src[FPSTR(S_OPENTHERM)][FPSTR(S_MAX_MODULATION)].isNull()) {
-      unsigned char value = src[FPSTR(S_OPENTHERM)][FPSTR(S_MAX_MODULATION)].as<unsigned char>();
-
-      if (value > 0 && value <= 100 && value != dst.opentherm.maxModulation) {
-        dst.opentherm.maxModulation = value;
-        changed = true;
-      }
-    }
-
     if (!src[FPSTR(S_OPENTHERM)][FPSTR(S_MIN_POWER)].isNull()) {
       float value = src[FPSTR(S_OPENTHERM)][FPSTR(S_MIN_POWER)].as<float>();
 
@@ -928,15 +922,6 @@ bool jsonToSettings(const JsonVariantConst src, Settings& dst, bool safe = false
       }
     }
 
-    if (src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_MODULATION_SYNC_WITH_HEATING)].is<bool>()) {
-      bool value = src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_MODULATION_SYNC_WITH_HEATING)].as<bool>();
-
-      if (value != dst.opentherm.options.modulationSyncWithHeating) {
-        dst.opentherm.options.modulationSyncWithHeating = value;
-        changed = true;
-      }
-    }
-
     if (src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_MAX_TEMP_SYNC_WITH_TARGET_TEMP)].is<bool>()) {
       bool value = src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_MAX_TEMP_SYNC_WITH_TARGET_TEMP)].as<bool>();
 
@@ -955,6 +940,33 @@ bool jsonToSettings(const JsonVariantConst src, Settings& dst, bool safe = false
       }
     }
 
+    if (src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_IGNORE_DIAG_STATE)].is<bool>()) {
+      bool value = src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_IGNORE_DIAG_STATE)].as<bool>();
+
+      if (value != dst.opentherm.options.ignoreDiagState) {
+        dst.opentherm.options.ignoreDiagState = value;
+        changed = true;
+      }
+    }
+
+    if (src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_AUTO_FAULT_RESET)].is<bool>()) {
+      bool value = src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_AUTO_FAULT_RESET)].as<bool>();
+
+      if (value != dst.opentherm.options.autoFaultReset) {
+        dst.opentherm.options.autoFaultReset = value;
+        changed = true;
+      }
+    }
+
+    if (src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_AUTO_DIAG_RESET)].is<bool>()) {
+      bool value = src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_AUTO_DIAG_RESET)].as<bool>();
+
+      if (value != dst.opentherm.options.autoDiagReset) {
+        dst.opentherm.options.autoDiagReset = value;
+        changed = true;
+      }
+    }
+
     if (src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_NATIVE_HEATING_CONTROL)].is<bool>()) {
       bool value = src[FPSTR(S_OPENTHERM)][FPSTR(S_OPTIONS)][FPSTR(S_NATIVE_HEATING_CONTROL)].as<bool>();
 
@@ -1301,6 +1313,16 @@ bool jsonToSettings(const JsonVariantConst src, Settings& dst, bool safe = false
   }
 
 
+  if (!src[FPSTR(S_HEATING)][FPSTR(S_MAX_MODULATION)].isNull()) {
+    unsigned char value = src[FPSTR(S_HEATING)][FPSTR(S_MAX_MODULATION)].as<unsigned char>();
+
+    if (value > 0 && value <= 100 && value != dst.heating.maxModulation) {
+      dst.heating.maxModulation = value;
+      changed = true;
+    }
+  }
+
+
   // dhw
   if (src[FPSTR(S_DHW)][FPSTR(S_ENABLED)].is<bool>()) {
     bool value = src[FPSTR(S_DHW)][FPSTR(S_ENABLED)].as<bool>();
@@ -1334,6 +1356,15 @@ bool jsonToSettings(const JsonVariantConst src, Settings& dst, bool safe = false
     changed = true;
   }
 
+  if (!src[FPSTR(S_DHW)][FPSTR(S_MAX_MODULATION)].isNull()) {
+    unsigned char value = src[FPSTR(S_DHW)][FPSTR(S_MAX_MODULATION)].as<unsigned char>();
+
+    if (value > 0 && value <= 100 && value != dst.dhw.maxModulation) {
+      dst.dhw.maxModulation = value;
+      changed = true;
+    }
+  }
+
 
   if (!safe) {
     // external pump

src_data/locales/en.json

@@ -292,6 +292,7 @@
         "min": "Minimum temperature",
         "max": "Maximum temperature"
       },
+      "maxModulation": "Max modulation level",
 
       "portal": {
         "login": "Login",
@@ -375,7 +376,6 @@
         "ledGpio": "RX LED GPIO",
         "memberId": "Master member ID",
         "flags": "Master flags",
-        "maxMod": "Max modulation level",
         "minPower": {
           "title": "Min boiler power <small>(kW)</small>",
           "note": "This value is at 0-1% boiler modulation level. Typically found in the boiler specification as \"minimum useful heat output\"."
@@ -395,9 +395,11 @@
           "heatingToCh2": "Duplicate heating to CH2",
           "dhwToCh2": "Duplicate DHW to CH2",
           "dhwBlocking": "DHW blocking",
-          "modulationSyncWithHeating": "Sync modulation with heating",
           "maxTempSyncWithTargetTemp": "Sync max heating temp with target temp",
           "getMinMaxTemp": "Get min/max temp from boiler",
+          "ignoreDiagState": "Ignore diag state",
+          "autoFaultReset": "Auto fault reset <small>(not recommended!)</small>",
+          "autoDiagReset": "Auto diag reset <small>(not recommended!)</small>",
           "immergasFix": "Fix for Immergas boilers"
         },
 

src_data/locales/it.json

@@ -292,6 +292,7 @@
         "min": "Temperatura minima",
         "max": "Temperatura massima"
       },
+      "maxModulation": "Max livello modulazione",
 
       "portal": {
         "login": "Login",
@@ -375,7 +376,6 @@
         "ledGpio": "RX LED GPIO",
         "memberId": "Master member ID",
         "flags": "Master flags",
-        "maxMod": "Max livello modulazione",
         "minPower": {
           "title": "Potenza minima caldaia <small>(kW)</small>",
           "note": "Questo valore corrisponde allo livello 0-1% di modulazione della caldaia. Di solito si trova nelle specifiche delle caldaia come \"potenza minima disponibile\"."
@@ -395,9 +395,11 @@
           "heatingToCh2": "Riproduci riscaldamento su CH2",
           "dhwToCh2": "Riproduci ACS su CH2",
           "dhwBlocking": "Bloccare ACS",
-          "modulationSyncWithHeating": "Sincronizzare modulazione con caldaia",
           "maxTempSyncWithTargetTemp": "Sincronizza la temperatura massima di riscaldamento con la temperatura target",
           "getMinMaxTemp": "Prendi temp min/max dalla caldaia",
+          "ignoreDiagState": "Ignora lo stato diagnostico",
+          "autoFaultReset": "Ripristino automatico degli errori <small>(sconsigliato!)</small>",
+          "autoDiagReset": "Ripristino diagnostico automatica <small>(sconsigliato!)</small>",
           "immergasFix": "Fix per caldiaie Immergas"
         },
 

src_data/locales/ru.json

@@ -292,6 +292,7 @@
         "min": "Мин. температура",
         "max": "Макс. температура"
       },
+      "maxModulation": "Макс. уровень модуляции",
 
       "portal": {
         "login": "Логин",
@@ -375,7 +376,6 @@
         "ledGpio": "RX LED GPIO",
         "memberId": "Master member ID",
         "flags": "Master flags",
-        "maxMod": "Макс. уровень модуляции",
         "minPower": {
           "title": "Мин. мощность котла <small>(кВт)</small>",
           "note": "Это значение соответствует уровню модуляции котла 0–1%. Обычно можно найти в спецификации котла как \"минимальная полезная тепловая мощность\"."
@@ -395,9 +395,11 @@
           "heatingToCh2": "Дублировать параметры отопления в канал 2",
           "dhwToCh2": "Дублировать параметры ГВС в канал 2",
           "dhwBlocking": "DHW blocking",
-          "modulationSyncWithHeating": "Синхронизировать модуляцию с отоплением",
           "maxTempSyncWithTargetTemp": "Синхронизировать макс. темп. отопления с целевой темп.",
           "getMinMaxTemp": "Получать мин. и макс. температуру от котла",
+          "ignoreDiagState": "Игнорировать состояние диагностики",
+          "autoFaultReset": "Автоматический сброс ошибок <small>(не рекомендуется!)</small>",
+          "autoDiagReset": "Автоматический сброс диагностики <small>(не рекомендуется!)</small>",
           "immergasFix": "Фикс для котлов Immergas"
         },
 

src_data/pages/settings.html

@@ -202,6 +202,11 @@
                 </label>
               </div>
 
+              <label>
+                <span data-i18n>settings.maxModulation</span>
+                <input type="number" inputmode="numeric" name="heating[maxModulation]" min="1" max="100" step="1" required>
+              </label>
+
               <button type="submit" data-i18n>button.save</button>
             </form>
           </div>
@@ -226,6 +231,11 @@
                 </label>
               </div>
 
+              <label>
+                <span data-i18n>settings.maxModulation</span>
+                <input type="number" inputmode="numeric" name="dhw[maxModulation]" min="1" max="100" step="1" required>
+              </label>
+
               <button type="submit" data-i18n>button.save</button>
             </form>
           </div>
@@ -457,11 +467,6 @@
                   <span data-i18n>settings.ot.flags</span>
                   <input type="number" inputmode="numeric" name="opentherm[flags]" min="0" max="255" step="1" required>
                 </label>
-
-                <label>
-                  <span data-i18n>settings.ot.maxMod</span>
-                  <input type="number" inputmode="numeric" name="opentherm[maxModulation]" min="1" max="100" step="1" required>
-                </label>
               </div>
 
               <div class="grid">
@@ -521,11 +526,6 @@
                   <span data-i18n>settings.ot.options.dhwBlocking</span>
                 </label>
 
-                <label>
-                  <input type="checkbox" name="opentherm[options][modulationSyncWithHeating]" value="true">
-                  <span data-i18n>settings.ot.options.modulationSyncWithHeating</span>
-                </label>
-
                 <label>
                   <input type="checkbox" name="opentherm[options][maxTempSyncWithTargetTemp]" value="true">
                   <span data-i18n>settings.ot.options.maxTempSyncWithTargetTemp</span>
@@ -536,6 +536,21 @@
                   <span data-i18n>settings.ot.options.getMinMaxTemp</span>
                 </label>
 
+                <label>
+                  <input type="checkbox" name="opentherm[options][ignoreDiagState]" value="true">
+                  <span data-i18n>settings.ot.options.ignoreDiagState</span>
+                </label>
+
+                <label>
+                  <input type="checkbox" name="opentherm[options][autoFaultReset]" value="true">
+                  <span data-i18n>settings.ot.options.autoFaultReset</span>
+                </label>
+
+                <label>
+                  <input type="checkbox" name="opentherm[options][autoDiagReset]" value="true">
+                  <span data-i18n>settings.ot.options.autoDiagReset</span>
+                </label>
+
                 <label>
                   <input type="checkbox" name="opentherm[options][immergasFix]" value="true">
                   <span data-i18n>settings.ot.options.immergasFix</span>
@@ -788,7 +803,6 @@
           setInputValue("[name='opentherm[rxLedGpio]']", data.opentherm.rxLedGpio < 255 ? data.opentherm.rxLedGpio : '');
           setInputValue("[name='opentherm[memberId]']", data.opentherm.memberId);
           setInputValue("[name='opentherm[flags]']", data.opentherm.flags);
-          setInputValue("[name='opentherm[maxModulation]']", data.opentherm.maxModulation);
           setInputValue("[name='opentherm[minPower]']", data.opentherm.minPower);
           setInputValue("[name='opentherm[maxPower]']", data.opentherm.maxPower);
           setCheckboxValue("[name='opentherm[options][dhwSupport]']", data.opentherm.options.dhwSupport);
@@ -799,9 +813,11 @@
           setCheckboxValue("[name='opentherm[options][heatingToCh2]']", data.opentherm.options.heatingToCh2);
           setCheckboxValue("[name='opentherm[options][dhwToCh2]']", data.opentherm.options.dhwToCh2);
           setCheckboxValue("[name='opentherm[options][dhwBlocking]']", data.opentherm.options.dhwBlocking);
-          setCheckboxValue("[name='opentherm[options][modulationSyncWithHeating]']", data.opentherm.options.modulationSyncWithHeating);
           setCheckboxValue("[name='opentherm[options][maxTempSyncWithTargetTemp]']", data.opentherm.options.maxTempSyncWithTargetTemp);
           setCheckboxValue("[name='opentherm[options][getMinMaxTemp]']", data.opentherm.options.getMinMaxTemp);
+          setCheckboxValue("[name='opentherm[options][ignoreDiagState]']", data.opentherm.options.ignoreDiagState);
+          setCheckboxValue("[name='opentherm[options][autoFaultReset]']", data.opentherm.options.autoFaultReset);
+          setCheckboxValue("[name='opentherm[options][autoDiagReset]']", data.opentherm.options.autoDiagReset);
           setCheckboxValue("[name='opentherm[options][nativeHeatingControl]']", data.opentherm.options.nativeHeatingControl);
           setCheckboxValue("[name='opentherm[options][immergasFix]']", data.opentherm.options.immergasFix);
           setBusy('#ot-settings-busy', '#ot-settings', false);
@@ -851,6 +867,7 @@
           });
           setInputValue("[name='heating[hysteresis]']", data.heating.hysteresis);
           setInputValue("[name='heating[turboFactor]']", data.heating.turboFactor);
+          setInputValue("[name='heating[maxModulation]']", data.heating.maxModulation);
           setBusy('#heating-settings-busy', '#heating-settings', false);
 
           // DHW
@@ -862,6 +879,7 @@
             "min": data.system.unitSystem == 0 ? 1 : 33,
             "max": data.system.unitSystem == 0 ? 100 : 212
           });
+          setInputValue("[name='dhw[maxModulation]']", data.dhw.maxModulation);
           setBusy('#dhw-settings-busy', '#dhw-settings', false);
 
           // Emergency mode
@@ -869,7 +887,7 @@
           if (data.opentherm.options.nativeHeatingControl) {
             setInputValue("[name='emergency[target]']", data.emergency.target, {
               "min": data.system.unitSystem == 0 ? 5 : 41,
-              "max": data.system.unitSystem == 0 ? 30 : 86
+              "max": data.system.unitSystem == 0 ? 40 : 86
             });
 
           } else {