jeka/OTGateway
1
0
Fork 0
mirror of https://github.com/Laxilef/OTGateway.git synced 2025-12-11 18:54:28 +05:00
Code Issues Packages Projects Releases Wiki Activity

refactor: reworked emergency mode; reworked hysteresis algorithm; improved detection of connection state for MANUAL & BOILER type sensors

Browse Source
This commit is contained in:
Yurii
2024-10-31 01:36:21 +03:00
parent 11b1277d79
commit a6e8953807
10 changed files with 245 additions and 451 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
src_data/locales/en.json
View File

@@ -224,27 +224,13 @@
},
"emergency": {
"desc": "<b>!</b> Emergency mode can be useful <u>only</u> when using Equitherm and/or PID (when normal work) and when reporting indoor/outdoor temperature via MQTT/API/BLE. In this mode, sensor values that are reported via MQTT/API/BLE are not used.",
"desc": "Emergency mode is activated automatically when «PID» or «Equitherm» cannot calculate the heat carrier setpoint:<br />- if «Equitherm» is enabled and the outdoor temperature sensor is disconnected;<br />- if «PID» or OT option <i>«Native heating control»</i> is enabled and the indoor temperature sensor is disconnected.<br /><b>Note:</b> On network fault or MQTT fault, sensors with <i>«Manual via MQTT/API»</i> type will be in DISCONNECTED state.",
"target": {
"title": "Target temperature",
"note": "<u>Indoor temperature</u> if Equitherm or PID is <b>enabled</b><br /><u>Heat carrier temperature</u> if Equitherm and PID <b>is disabled</b>"
"note": "<b>Important:</b> <u>Target indoor temperature</u> if OT option <i>«Native heating control»</i> is enabled.<br />In all other cases, the <u>target heat carrier temperature</u>."
},
"treshold": "Treshold time <small>(sec)</small>",
"events": {
"desc": "Events",
"network": "On network fault",
"mqtt": "On MQTT fault",
"indoorSensorDisconnect": "On loss connection with indoor sensor",
"outdoorSensorDisconnect": "On loss connection with outdoor sensor"
},
"regulators": {
"desc": "Using regulators",
"equitherm": "Equitherm <small>(requires at least an external (DS18B20) or boiler <u>outdoor</u> sensor)</small>",
"pid": "PID <small>(requires at least an external (DS18B20) <u>indoor</u> sensor)</small>"
}
"treshold": "Treshold time <small>(sec)</small>"
},
"equitherm": {
@@ -260,7 +246,8 @@
"p": "P factor",
"i": "I factor",
"d": "D factor",
"dt": "DT <small>in seconds</small>"
"dt": "DT <small>in seconds</small>",
"noteMinMaxTemp": "<b>Important:</b> When using «Equitherm» and «PID» at the same time, the min and max temperatures limit the influence on the «Equitherm» result temperature.<br />Thus, if the min temperature is set to -15 and the max temperature is set to 15, then the final heat carrier setpoint will be from <code>equitherm_result - 15</code> to <code>equitherm_result + 15</code>."
},
"ot": {
@@ -313,7 +300,7 @@
"nativeHeating": {
"title": "Native heating control (boiler)",
"note": "Works <u>ONLY</u> if the boiler requires the desired room temperature and regulates the temperature of the coolant itself. Not compatible with PID and Equitherm regulators and hysteresis in firmware."
"note": "Works <u>ONLY</u> if the boiler requires the desired room temperature and regulates the temperature of the coolant itself. Not compatible with PID and Equitherm regulators in firmware."
}
},