Compatible with ESP32

tools/build.py

@@ -0,0 +1,21 @@
+import shutil
+import os
+Import("env")
+
+def post_build(source, target, env):
+    if os.path.exists(os.path.join(env["PROJECT_DIR"], "build")) == False:
+        return
+
+    files = {
+        env.subst("$BUILD_DIR/${PROGNAME}.bin"): "firmware_%s_%s.bin" % (env["PIOENV"], env.GetProjectOption("version")),
+        env.subst("$BUILD_DIR/${PROGNAME}.factory.bin"): "firmware_%s_%s.factory.bin" % (env["PIOENV"], env.GetProjectOption("version")),
+    }
+
+    for src in files:
+        if os.path.exists(src):
+            dest = os.path.join(env["PROJECT_DIR"], "build", files[src])
+            
+            print("Copying '%s' to '%s'" % (src, dest))
+            shutil.copy(src, dest)
+
+env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", post_build)

tools/esp32.py

@@ -0,0 +1,79 @@
+# Source: https://raw.githubusercontent.com/letscontrolit/ESPEasy/mega/tools/pio/post_esp32.py
+
+# Part of ESPEasy build toolchain.
+#
+# Combines separate bin files with their respective offsets into a single file
+# This single file must then be flashed to an ESP32 node with 0 offset.
+#
+# Original implementation: Bartłomiej Zimoń (@uzi18)
+# Maintainer: Gijs Noorlander (@TD-er)
+#
+# Special thanks to @Jason2866 (Tasmota) for helping debug flashing to >4MB flash
+# Thanks @jesserockz (esphome) for adapting to use esptool.py with merge_bin
+#
+# Typical layout of the generated file:
+#    Offset | File
+# -  0x1000 | ~\.platformio\packages\framework-arduinoespressif32\tools\sdk\esp32\bin\bootloader_dout_40m.bin
+# -  0x8000 | ~\ESPEasy\.pio\build\<env name>\partitions.bin
+# -  0xe000 | ~\.platformio\packages\framework-arduinoespressif32\tools\partitions\boot_app0.bin
+# - 0x10000 | ~\ESPEasy\.pio\build\<env name>/<built binary>.bin
+
+Import("env")
+
+platform = env.PioPlatform()
+
+import sys
+from os.path import join
+
+sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
+import esptool
+
+def esp32_create_combined_bin(source, target, env):
+    print("Generating combined binary for serial flashing")
+
+    # The offset from begin of the file where the app0 partition starts
+    # This is defined in the partition .csv file
+    app_offset = 0x10000
+
+    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
+    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
+    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
+    chip = env.get("BOARD_MCU")
+    flash_size = env.BoardConfig().get("upload.flash_size")
+    flash_freq = env.BoardConfig().get("build.f_flash", '40m')
+    flash_freq = flash_freq.replace('000000L', 'm')
+    flash_mode = env.BoardConfig().get("build.flash_mode", "dio")
+    memory_type = env.BoardConfig().get("build.arduino.memory_type", "qio_qspi")
+    if flash_mode == "qio" or flash_mode == "qout":
+        flash_mode = "dio"
+    if memory_type == "opi_opi" or memory_type == "opi_qspi":
+        flash_mode = "dout"
+    cmd = [
+        "--chip",
+        chip,
+        "merge_bin",
+        "-o",
+        new_file_name,
+        "--flash_mode",
+        flash_mode,
+        "--flash_freq",
+        flash_freq,
+        "--flash_size",
+        flash_size,
+    ]
+
+    print("    Offset | File")
+    for section in sections:
+        sect_adr, sect_file = section.split(" ", 1)
+        print(f" -  {sect_adr} | {sect_file}")
+        cmd += [sect_adr, sect_file]
+
+    print(f" - {hex(app_offset)} | {firmware_name}")
+    cmd += [hex(app_offset), firmware_name]
+
+    print('Using esptool.py arguments: %s' % ' '.join(cmd))
+
+    esptool.main(cmd)
+
+
+env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)