32 lines
1.1 KiB
Plaintext
32 lines
1.1 KiB
Plaintext
# core HAL config file for simulation
|
|
|
|
# first load all the RT modules that will be needed
|
|
# kinematics
|
|
loadrt [KINS]KINEMATICS
|
|
# motion controller, get name and thread periods from ini file
|
|
loadrt [EMCMOT]EMCMOT base_period_nsec=[EMCMOT]BASE_PERIOD servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[KINS]JOINTS
|
|
|
|
# add motion controller functions to servo thread
|
|
addf motion-command-handler servo-thread
|
|
addf motion-controller servo-thread
|
|
|
|
# create HAL signals for position commands from motion module
|
|
# loop position commands back to motion module feedback
|
|
net Xpos joint.0.motor-pos-cmd => joint.0.motor-pos-fb
|
|
net Zpos joint.1.motor-pos-cmd => joint.1.motor-pos-fb
|
|
|
|
# estop loopback
|
|
net estop-loop iocontrol.0.user-enable-out iocontrol.0.emc-enable-in
|
|
|
|
# create signals for tool loading loopback
|
|
net tool-prep-loop iocontrol.0.tool-prepare iocontrol.0.tool-prepared
|
|
net tool-change-loop iocontrol.0.tool-change iocontrol.0.tool-changed
|
|
|
|
net spindle-fwd spindle.0.forward
|
|
net spindle-rev spindle.0.reverse
|
|
#net spindle-speed spindle.0.speed-out
|
|
|
|
net lube iocontrol.0.lube
|
|
net flood iocontrol.0.coolant-flood
|
|
net mist iocontrol.0.coolant-mist
|