loadrt [KINS]KINEMATICS
loadrt [EMCMOT]EMCMOT servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[KINS]JOINTS

loadusr -W rotarydelta

# add motion controller functions to servo thread
addf motion-command-handler servo-thread
addf motion-controller servo-thread

# create HAL signals for position commands from motion module
# loop position commands back to motion module feedback
net J0pos joint.0.motor-pos-cmd => joint.0.motor-pos-fb
net J1pos joint.1.motor-pos-cmd => joint.1.motor-pos-fb
net J2pos joint.2.motor-pos-cmd => joint.2.motor-pos-fb

net J3pos joint.3.motor-pos-cmd => joint.3.motor-pos-fb
net J4pos joint.4.motor-pos-cmd => joint.4.motor-pos-fb
net J5pos joint.5.motor-pos-cmd => joint.5.motor-pos-fb
net J6pos joint.6.motor-pos-cmd => joint.6.motor-pos-fb
net J7pos joint.7.motor-pos-cmd => joint.7.motor-pos-fb
net J8pos joint.8.motor-pos-cmd => joint.8.motor-pos-fb

net J0cmd joint.0.pos-cmd => rotarydelta.joint0
net J1cmd joint.1.pos-cmd => rotarydelta.joint1
net J2cmd joint.2.pos-cmd => rotarydelta.joint2

net pfr rotarydeltakins.platformradius => rotarydelta.pfr
net tl rotarydeltakins.thighlength => rotarydelta.tl
net sl rotarydeltakins.shinlength => rotarydelta.sl
net fr rotarydeltakins.footradius => rotarydelta.fr

sets pfr 10
sets tl 10
sets sl 18
sets fr 5

# estop loopback
net estop-loop iocontrol.0.user-enable-out iocontrol.0.emc-enable-in

# create signals for tool loading loopback
net tool-prep-loop iocontrol.0.tool-prepare iocontrol.0.tool-prepared
net tool-change-loop iocontrol.0.tool-change iocontrol.0.tool-changed