jeka/MyOwnEtherCATDevice
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Test case for HardwareTime frequency discrepancy + doc

Browse Source
This commit is contained in:
Hakan Bastedt
2024-03-27 22:03:10 +01:00
parent ea5a39d300
commit e6ae2ad3c7
3 changed files with 29 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

BIN
Firmware/doc/Stepgen.odp
View File

Binary file not shown.

2
Firmware/include/StepGen3.h
View File

@@ -144,7 +144,7 @@ private:
};
// For the example
#define BASE_PERIOD 20000 // 12 is max
#define BASE_PERIOD 12000 // 12 is max
#define SERVO_PERIOD 1000000
#define JOINT_X_STEPGEN_MAXACCEL (1.2 * 520.0)
#define JOINT_X_SCALE -200

33
Firmware/src/main.cpp
View File

@@ -29,6 +29,7 @@ StepGen3 *Step = 0;
CircularBuffer<uint64_t, 200> Tim;
volatile uint64_t irqTime = 0, thenTime = 0, nowTime = 0;
extend32to64 longTime;
volatile uint16_t isrTime = 0;
void cb_set_outputs(void) // Master outputs gets here, slave inputs, first operation
{
@@ -65,8 +66,9 @@ void handleStepper(void)
pos_cmd1 = Obj.CommandedPosition1;
pos_cmd2 = Obj.CommandedPosition2;
// Obj.ActualPosition1 = Obj.CommandedPosition1;
// Obj.ActualPosition2 = Obj.CommandedPosition2;
Obj.ActualPosition1 = Obj.CommandedPosition1;
Obj.ActualPosition2 = Obj.CommandedPosition2;
#if 0
if (Step)
{
Step->stepgen_array[0].pos_scale = -Obj.StepsPerMM1;
@@ -87,8 +89,9 @@ void handleStepper(void)
{
syncWithLCNC();
}
#endif
}
uint16_t oldCnt = 0;
void cb_get_inputs(void) // Set Master inputs, slave outputs, last operation
{
// Obj.IndexStatus = Encoder1.indexHappened();
@@ -111,8 +114,11 @@ void cb_get_inputs(void) // Set Master inputs, slave outputs, last operation
thenTime = irqTime;
#endif
Obj.DiffT = longTime.extendTime(micros()) - irqTime; // max_Tim - min_Tim; // Debug
Obj.D1 = Step->cnt % INT16_MAX; //nLoops;
Obj.D2 = Step->stepgen_array[1].freq;
Obj.D1 = nLoops;
uint16_t newCnt = isrTime;
Obj.D1 = newCnt - oldCnt;
oldCnt = newCnt;
Obj.D2 = isrTime; // Step->stepgen_array[1].freq;
Obj.D3 = 100 * Obj.CommandedPosition2; // abs(1000 * (ap2 - Obj.CommandedPosition2)); // Step2.actPos();
Obj.D4 = 100 * Obj.ActualPosition2;
}
@@ -143,9 +149,10 @@ static esc_cfg_t config =
};
volatile byte serveIRQ = 0;
void basePeriodCB(void)
{
isrTime++;
#if 0
if (Step && Step->stepgen_array)
{
Step->make_pulses(Step->stepgen_array, BASE_PERIOD);
@@ -157,6 +164,7 @@ void basePeriodCB(void)
digitalWrite(Step->stepPin[i], step->phase[STEP_PIN] ? HIGH : LOW);
}
}
#endif
}
void setup(void)
@@ -164,7 +172,7 @@ void setup(void)
Serial1.begin(115200);
rcc_config(); // Needed by encoder, probably breaks some timers.
// rcc_config(); // Needed by encoder, probably breaks some timers.
ecat_slv_init(&config);
pinMode(PA11, OUTPUT);
@@ -173,13 +181,18 @@ void setup(void)
pinMode(PC10, OUTPUT);
Step = new StepGen3;
myTim = new HardwareTimer(TIM1); // The base period timer
myTim->setOverflow(BASE_PERIOD / 1000, MICROSEC_FORMAT);
myTim = new HardwareTimer(TIM11); // The base period timer
// myTim->setPrescaleFactor(168); // 1 MHz
// myTim->setPreloadEnable(true);
// myTim->setOverflow(100); // 100 usecs
myTim->setOverflow(1000, HERTZ_FORMAT);
myTim->attachInterrupt(basePeriodCB);
myTim->refresh();
myTim->resume();
#if 0
syncTimer = new HardwareTimer(TIM2); // The base period timer
syncTimer->attachInterrupt(syncWithLCNC);
#endif
}
void loop(void)